diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/i2o.h | 292 |
1 files changed, 12 insertions, 280 deletions
diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 75ae6d8aba4..4c4e57d1f19 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -570,7 +570,6 @@ struct i2o_controller { #endif spinlock_t lock; /* lock for controller configuration */ - void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */ }; @@ -691,289 +690,22 @@ static inline u32 i2o_dma_high(dma_addr_t dma_addr) }; #endif -/** - * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL - * @c: I2O controller for which the calculation should be done - * @body_size: maximum body size used for message in 32-bit words. - * - * Return the maximum number of SG elements in a SG list. - */ -static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) -{ - i2o_status_block *sb = c->status_block.virt; - u16 sg_count = - (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) - - body_size; - - if (c->pae_support) { - /* - * for 64-bit a SG attribute element must be added and each - * SG element needs 12 bytes instead of 8. - */ - sg_count -= 2; - sg_count /= 3; - } else - sg_count /= 2; - - if (c->short_req && (sg_count > 8)) - sg_count = 8; - - return sg_count; -}; - -/** - * i2o_dma_map_single - Map pointer to controller and fill in I2O message. - * @c: I2O controller - * @ptr: pointer to the data which should be mapped - * @size: size of data in bytes - * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE - * @sg_ptr: pointer to the SG list inside the I2O message - * - * This function does all necessary DMA handling and also writes the I2O - * SGL elements into the I2O message. For details on DMA handling see also - * dma_map_single(). The pointer sg_ptr will only be set to the end of the - * SG list if the allocation was successful. - * - * Returns DMA address which must be checked for failures using - * dma_mapping_error(). - */ -static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, +extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size); +extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, size_t size, enum dma_data_direction direction, - u32 ** sg_ptr) -{ - u32 sg_flags; - u32 *mptr = *sg_ptr; - dma_addr_t dma_addr; - - switch (direction) { - case DMA_TO_DEVICE: - sg_flags = 0xd4000000; - break; - case DMA_FROM_DEVICE: - sg_flags = 0xd0000000; - break; - default: - return 0; - } - - dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction); - if (!dma_mapping_error(&c->pdev->dev, dma_addr)) { -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - *mptr++ = cpu_to_le32(0x7C020002); - *mptr++ = cpu_to_le32(PAGE_SIZE); - } -#endif - - *mptr++ = cpu_to_le32(sg_flags | size); - *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr)); -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) - *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr)); -#endif - *sg_ptr = mptr; - } - return dma_addr; -}; - -/** - * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message. - * @c: I2O controller - * @sg: SG list to be mapped - * @sg_count: number of elements in the SG list - * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE - * @sg_ptr: pointer to the SG list inside the I2O message - * - * This function does all necessary DMA handling and also writes the I2O - * SGL elements into the I2O message. For details on DMA handling see also - * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG - * list if the allocation was successful. - * - * Returns 0 on failure or 1 on success. - */ -static inline int i2o_dma_map_sg(struct i2o_controller *c, + u32 ** sg_ptr); +extern int i2o_dma_map_sg(struct i2o_controller *c, struct scatterlist *sg, int sg_count, enum dma_data_direction direction, - u32 ** sg_ptr) -{ - u32 sg_flags; - u32 *mptr = *sg_ptr; - - switch (direction) { - case DMA_TO_DEVICE: - sg_flags = 0x14000000; - break; - case DMA_FROM_DEVICE: - sg_flags = 0x10000000; - break; - default: - return 0; - } - - sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction); - if (!sg_count) - return 0; - -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - *mptr++ = cpu_to_le32(0x7C020002); - *mptr++ = cpu_to_le32(PAGE_SIZE); - } -#endif - - while (sg_count-- > 0) { - if (!sg_count) - sg_flags |= 0xC0000000; - *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg)); - *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg))); -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) - *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg))); -#endif - sg = sg_next(sg); - } - *sg_ptr = mptr; - - return 1; -}; - -/** - * i2o_dma_alloc - Allocate DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should get the DMA buffer - * @len: length of the new DMA memory - * @gfp_mask: GFP mask - * - * Allocate a coherent DMA memory and write the pointers into addr. - * - * Returns 0 on success or -ENOMEM on failure. - */ -static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, - size_t len, gfp_t gfp_mask) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int dma_64 = 0; - - if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) { - dma_64 = 1; - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) - return -ENOMEM; - } - - addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); - - if ((sizeof(dma_addr_t) > 4) && dma_64) - if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)) - printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); - - if (!addr->virt) - return -ENOMEM; - - memset(addr->virt, 0, len); - addr->len = len; - - return 0; -}; - -/** - * i2o_dma_free - Free DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which contains the DMA buffer - * - * Free a coherent DMA memory and set virtual address of addr to NULL. - */ -static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) -{ - if (addr->virt) { - if (addr->phys) - dma_free_coherent(dev, addr->len, addr->virt, - addr->phys); - else - kfree(addr->virt); - addr->virt = NULL; - } -}; - -/** - * i2o_dma_realloc - Realloc DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: pointer to a i2o_dma struct DMA buffer - * @len: new length of memory - * @gfp_mask: GFP mask - * - * If there was something allocated in the addr, free it first. If len > 0 - * than try to allocate it and write the addresses back to the addr - * structure. If len == 0 set the virtual address to NULL. - * - * Returns the 0 on success or negative error code on failure. - */ -static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, - size_t len, gfp_t gfp_mask) -{ - i2o_dma_free(dev, addr); - - if (len) - return i2o_dma_alloc(dev, addr, len, gfp_mask); - - return 0; -}; - -/* - * i2o_pool_alloc - Allocate an slab cache and mempool - * @mempool: pointer to struct i2o_pool to write data into. - * @name: name which is used to identify cache - * @size: size of each object - * @min_nr: minimum number of objects - * - * First allocates a slab cache with name and size. Then allocates a - * mempool which uses the slab cache for allocation and freeing. - * - * Returns 0 on success or negative error code on failure. - */ -static inline int i2o_pool_alloc(struct i2o_pool *pool, const char *name, - size_t size, int min_nr) -{ - pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL); - if (!pool->name) - goto exit; - strcpy(pool->name, name); - - pool->slab = - kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL); - if (!pool->slab) - goto free_name; - - pool->mempool = mempool_create_slab_pool(min_nr, pool->slab); - if (!pool->mempool) - goto free_slab; - - return 0; - - free_slab: - kmem_cache_destroy(pool->slab); - - free_name: - kfree(pool->name); - - exit: - return -ENOMEM; -}; - -/* - * i2o_pool_free - Free slab cache and mempool again - * @mempool: pointer to struct i2o_pool which should be freed - * - * Note that you have to return all objects to the mempool again before - * calling i2o_pool_free(). - */ -static inline void i2o_pool_free(struct i2o_pool *pool) -{ - mempool_destroy(pool->mempool); - kmem_cache_destroy(pool->slab); - kfree(pool->name); -}; - + u32 ** sg_ptr); +extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len); +extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr); +extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, + size_t len); +extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name, + size_t size, int min_nr); +extern void i2o_pool_free(struct i2o_pool *pool); /* I2O driver (OSM) functions */ extern int i2o_driver_register(struct i2o_driver *); extern void i2o_driver_unregister(struct i2o_driver *); |