diff options
Diffstat (limited to 'include/linux')
108 files changed, 1955 insertions, 883 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 34321cfffea..dfcd920c3e5 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -41,8 +41,6 @@ #include <acpi/acpi_drivers.h> #include <acpi/acpi_numa.h> #include <asm/acpi.h> -#include <linux/dmi.h> - enum acpi_irq_model_id { ACPI_IRQ_MODEL_PIC = 0, @@ -219,10 +217,8 @@ static inline int acpi_video_display_switch_support(void) #endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ extern int acpi_blacklisted(void); -#ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); extern int acpi_osi_setup(char *str); -#endif #ifdef CONFIG_ACPI_NUMA int acpi_get_pxm(acpi_handle handle); @@ -292,7 +288,10 @@ void __init acpi_s4_no_nvs(void); extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags); extern void acpi_early_init(void); -#else /* CONFIG_ACPI */ +#else /* !CONFIG_ACPI */ + +#define acpi_disabled 1 + static inline void acpi_early_init(void) { } static inline int early_acpi_boot_init(void) @@ -331,5 +330,11 @@ static inline int acpi_check_mem_region(resource_size_t start, return 0; } +struct acpi_table_header; +static inline int acpi_table_parse(char *id, + int (*handler)(struct acpi_table_header *)) +{ + return -1; +} #endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h index e0a0cdc2da4..69a21e0ebd3 100644 --- a/include/linux/anon_inodes.h +++ b/include/linux/anon_inodes.h @@ -8,6 +8,9 @@ #ifndef _LINUX_ANON_INODES_H #define _LINUX_ANON_INODES_H +struct file *anon_inode_getfile(const char *name, + const struct file_operations *fops, + void *priv, int flags); int anon_inode_getfd(const char *name, const struct file_operations *fops, void *priv, int flags); diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 2046b5b8af4..aece486ac73 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -120,7 +120,7 @@ extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm); extern int prepare_bprm_creds(struct linux_binprm *bprm); extern void install_exec_creds(struct linux_binprm *bprm); extern void do_coredump(long signr, int exit_code, struct pt_regs *regs); -extern int set_binfmt(struct linux_binfmt *new); +extern void set_binfmt(struct linux_binfmt *new); extern void free_bprm(struct linux_binprm *); #endif /* __KERNEL__ */ diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 90bba9e6228..b62bb9294d0 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -141,6 +141,38 @@ enum { CGRP_WAIT_ON_RMDIR, }; +/* which pidlist file are we talking about? */ +enum cgroup_filetype { + CGROUP_FILE_PROCS, + CGROUP_FILE_TASKS, +}; + +/* + * A pidlist is a list of pids that virtually represents the contents of one + * of the cgroup files ("procs" or "tasks"). We keep a list of such pidlists, + * a pair (one each for procs, tasks) for each pid namespace that's relevant + * to the cgroup. + */ +struct cgroup_pidlist { + /* + * used to find which pidlist is wanted. doesn't change as long as + * this particular list stays in the list. + */ + struct { enum cgroup_filetype type; struct pid_namespace *ns; } key; + /* array of xids */ + pid_t *list; + /* how many elements the above list has */ + int length; + /* how many files are using the current array */ + int use_count; + /* each of these stored in a list by its cgroup */ + struct list_head links; + /* pointer to the cgroup we belong to, for list removal purposes */ + struct cgroup *owner; + /* protects the other fields */ + struct rw_semaphore mutex; +}; + struct cgroup { unsigned long flags; /* "unsigned long" so bitops work */ @@ -179,11 +211,12 @@ struct cgroup { */ struct list_head release_list; - /* pids_mutex protects pids_list and cached pid arrays. */ - struct rw_semaphore pids_mutex; - - /* Linked list of struct cgroup_pids */ - struct list_head pids_list; + /* + * list of pidlists, up to two for each namespace (one for procs, one + * for tasks); created on demand. + */ + struct list_head pidlists; + struct mutex pidlist_mutex; /* For RCU-protected deletion */ struct rcu_head rcu_head; @@ -227,6 +260,9 @@ struct css_set { * during subsystem registration (at boot time). */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; + + /* For RCU-protected deletion */ + struct rcu_head rcu_head; }; /* @@ -389,10 +425,11 @@ struct cgroup_subsys { struct cgroup *cgrp); int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); - int (*can_attach)(struct cgroup_subsys *ss, - struct cgroup *cgrp, struct task_struct *tsk); + int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, + struct task_struct *tsk, bool threadgroup); void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup *old_cgrp, struct task_struct *tsk); + struct cgroup *old_cgrp, struct task_struct *tsk, + bool threadgroup); void (*fork)(struct cgroup_subsys *ss, struct task_struct *task); void (*exit)(struct cgroup_subsys *ss, struct task_struct *task); int (*populate)(struct cgroup_subsys *ss, diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index b8125b2eb66..47dac5ea8d3 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -52,6 +52,7 @@ struct proc_event { PROC_EVENT_EXEC = 0x00000002, PROC_EVENT_UID = 0x00000004, PROC_EVENT_GID = 0x00000040, + PROC_EVENT_SID = 0x00000080, /* "next" should be 0x00000400 */ /* "last" is the last process event: exit */ PROC_EVENT_EXIT = 0x80000000 @@ -89,6 +90,11 @@ struct proc_event { } e; } id; + struct sid_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + } sid; + struct exit_proc_event { __kernel_pid_t process_pid; __kernel_pid_t process_tgid; @@ -102,6 +108,7 @@ struct proc_event { void proc_fork_connector(struct task_struct *task); void proc_exec_connector(struct task_struct *task); void proc_id_connector(struct task_struct *task, int which_id); +void proc_sid_connector(struct task_struct *task); void proc_exit_connector(struct task_struct *task); #else static inline void proc_fork_connector(struct task_struct *task) @@ -114,6 +121,9 @@ static inline void proc_id_connector(struct task_struct *task, int which_id) {} +static inline void proc_sid_connector(struct task_struct *task) +{} + static inline void proc_exit_connector(struct task_struct *task) {} #endif /* CONFIG_PROC_EVENTS */ diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 7f627775c94..ddb7a97c78c 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -27,8 +27,8 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please read Documentation/filesystems/configfs.txt before using the - * configfs interface, ESPECIALLY the parts about reference counts and + * Please read Documentation/filesystems/configfs/configfs.txt before using + * the configfs interface, ESPECIALLY the parts about reference counts and * item destructors. */ diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 796df12091b..789cf5f920c 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -3,444 +3,37 @@ /* * Cpumasks provide a bitmap suitable for representing the - * set of CPU's in a system, one bit position per CPU number. - * - * The new cpumask_ ops take a "struct cpumask *"; the old ones - * use cpumask_t. - * - * See detailed comments in the file linux/bitmap.h describing the - * data type on which these cpumasks are based. - * - * For details of cpumask_scnprintf() and cpumask_parse_user(), - * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c. - * For details of cpulist_scnprintf() and cpulist_parse(), see - * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c. - * For details of cpu_remap(), see bitmap_bitremap in lib/bitmap.c - * For details of cpus_remap(), see bitmap_remap in lib/bitmap.c. - * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c. - * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c. - * - * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - * Note: The alternate operations with the suffix "_nr" are used - * to limit the range of the loop to nr_cpu_ids instead of - * NR_CPUS when NR_CPUS > 64 for performance reasons. - * If NR_CPUS is <= 64 then most assembler bitmask - * operators execute faster with a constant range, so - * the operator will continue to use NR_CPUS. - * - * Another consideration is that nr_cpu_ids is initialized - * to NR_CPUS and isn't lowered until the possible cpus are - * discovered (including any disabled cpus). So early uses - * will span the entire range of NR_CPUS. - * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - * - * The obsolescent cpumask operations are: - * - * void cpu_set(cpu, mask) turn on bit 'cpu' in mask - * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask - * void cpus_setall(mask) set all bits - * void cpus_clear(mask) clear all bits - * int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask - * int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask - * - * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection] - * void cpus_or(dst, src1, src2) dst = src1 | src2 [union] - * void cpus_xor(dst, src1, src2) dst = src1 ^ src2 - * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2 - * void cpus_complement(dst, src) dst = ~src - * - * int cpus_equal(mask1, mask2) Does mask1 == mask2? - * int cpus_intersects(mask1, mask2) Do mask1 and mask2 intersect? - * int cpus_subset(mask1, mask2) Is mask1 a subset of mask2? - * int cpus_empty(mask) Is mask empty (no bits sets)? - * int cpus_full(mask) Is mask full (all bits sets)? - * int cpus_weight(mask) Hamming weigh - number of set bits - * int cpus_weight_nr(mask) Same using nr_cpu_ids instead of NR_CPUS - * - * void cpus_shift_right(dst, src, n) Shift right - * void cpus_shift_left(dst, src, n) Shift left - * - * int first_cpu(mask) Number lowest set bit, or NR_CPUS - * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS - * int next_cpu_nr(cpu, mask) Next cpu past 'cpu', or nr_cpu_ids - * - * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set - * (can be used as an lvalue) - * CPU_MASK_ALL Initializer - all bits set - * CPU_MASK_NONE Initializer - no bits set - * unsigned long *cpus_addr(mask) Array of unsigned long's in mask - * - * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t - * variables, and CPUMASK_PTR provides pointers to each field. - * - * The structure should be defined something like this: - * struct my_cpumasks { - * cpumask_t mask1; - * cpumask_t mask2; - * }; - * - * Usage is then: - * CPUMASK_ALLOC(my_cpumasks); - * CPUMASK_PTR(mask1, my_cpumasks); - * CPUMASK_PTR(mask2, my_cpumasks); - * - * --- DO NOT reference cpumask_t pointers until this check --- - * if (my_cpumasks == NULL) - * "kmalloc failed"... - * - * References are now pointers to the cpumask_t variables (*mask1, ...) - * - *if NR_CPUS > BITS_PER_LONG - * CPUMASK_ALLOC(m) Declares and allocates struct m *m = - * kmalloc(sizeof(*m), GFP_KERNEL) - * CPUMASK_FREE(m) Macro for kfree(m) - *else - * CPUMASK_ALLOC(m) Declares struct m _m, *m = &_m - * CPUMASK_FREE(m) Nop - *endif - * CPUMASK_PTR(v, m) Declares cpumask_t *v = &(m->v) - * ------------------------------------------------------------------------ - * - * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing - * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask - * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing - * int cpulist_parse(buf, map) Parse ascii string as cpulist - * int cpu_remap(oldbit, old, new) newbit = map(old, new)(oldbit) - * void cpus_remap(dst, src, old, new) *dst = map(old, new)(src) - * void cpus_onto(dst, orig, relmap) *dst = orig relative to relmap - * void cpus_fold(dst, orig, sz) dst bits = orig bits mod sz - * - * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS - * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids - * - * int num_online_cpus() Number of online CPUs - * int num_possible_cpus() Number of all possible CPUs - * int num_present_cpus() Number of present CPUs - * - * int cpu_online(cpu) Is some cpu online? - * int cpu_possible(cpu) Is some cpu possible? - * int cpu_present(cpu) Is some cpu present (can schedule)? - * - * int any_online_cpu(mask) First online cpu in mask - * - * for_each_possible_cpu(cpu) for-loop cpu over cpu_possible_map - * for_each_online_cpu(cpu) for-loop cpu over cpu_online_map - * for_each_present_cpu(cpu) for-loop cpu over cpu_present_map - * - * Subtlety: - * 1) The 'type-checked' form of cpu_isset() causes gcc (3.3.2, anyway) - * to generate slightly worse code. Note for example the additional - * 40 lines of assembly code compiling the "for each possible cpu" - * loops buried in the disk_stat_read() macros calls when compiling - * drivers/block/genhd.c (arch i386, CONFIG_SMP=y). So use a simple - * one-line #define for cpu_isset(), instead of wrapping an inline - * inside a macro, the way we do the other calls. + * set of CPU's in a system, one bit position per CPU number. In general, + * only nr_cpu_ids (<= NR_CPUS) bits are valid. */ - #include <linux/kernel.h> #include <linux/threads.h> #include <linux/bitmap.h> typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; -extern cpumask_t _unused_cpumask_arg_; - -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) -static inline void __cpu_set(int cpu, volatile cpumask_t *dstp) -{ - set_bit(cpu, dstp->bits); -} - -#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst)) -static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp) -{ - clear_bit(cpu, dstp->bits); -} - -#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS) -static inline void __cpus_setall(cpumask_t *dstp, int nbits) -{ - bitmap_fill(dstp->bits, nbits); -} - -#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS) -static inline void __cpus_clear(cpumask_t *dstp, int nbits) -{ - bitmap_zero(dstp->bits, nbits); -} - -/* No static inline type checking - see Subtlety (1) above. */ -#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits) - -#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask)) -static inline int __cpu_test_and_set(int cpu, cpumask_t *addr) -{ - return test_and_set_bit(cpu, addr->bits); -} - -#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS) -static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_andnot(dst, src1, src2) \ - __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS) -static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS) -static inline void __cpus_complement(cpumask_t *dstp, - const cpumask_t *srcp, int nbits) -{ - bitmap_complement(dstp->bits, srcp->bits, nbits); -} - -#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS) -static inline int __cpus_equal(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_equal(src1p->bits, src2p->bits, nbits); -} - -#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS) -static inline int __cpus_intersects(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_intersects(src1p->bits, src2p->bits, nbits); -} - -#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS) -static inline int __cpus_subset(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_subset(src1p->bits, src2p->bits, nbits); -} - -#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS) -static inline int __cpus_empty(const cpumask_t *srcp, int nbits) -{ - return bitmap_empty(srcp->bits, nbits); -} - -#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS) -static inline int __cpus_full(const cpumask_t *srcp, int nbits) -{ - return bitmap_full(srcp->bits, nbits); -} - -#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS) -static inline int __cpus_weight(const cpumask_t *srcp, int nbits) -{ - return bitmap_weight(srcp->bits, nbits); -} - -#define cpus_shift_right(dst, src, n) \ - __cpus_shift_right(&(dst), &(src), (n), NR_CPUS) -static inline void __cpus_shift_right(cpumask_t *dstp, - const cpumask_t *srcp, int n, int nbits) -{ - bitmap_shift_right(dstp->bits, srcp->bits, n, nbits); -} - -#define cpus_shift_left(dst, src, n) \ - __cpus_shift_left(&(dst), &(src), (n), NR_CPUS) -static inline void __cpus_shift_left(cpumask_t *dstp, - const cpumask_t *srcp, int n, int nbits) -{ - bitmap_shift_left(dstp->bits, srcp->bits, n, nbits); -} -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ /** - * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * - * @bitmap: the bitmap - * - * There are a few places where cpumask_var_t isn't appropriate and - * static cpumasks must be used (eg. very early boot), yet we don't - * expose the definition of 'struct cpumask'. + * cpumask_bits - get the bits in a cpumask + * @maskp: the struct cpumask * * - * This does the conversion, and can be used as a constant initializer. + * You should only assume nr_cpu_ids bits of this mask are valid. This is + * a macro so it's const-correct. */ -#define to_cpumask(bitmap) \ - ((struct cpumask *)(1 ? (bitmap) \ - : (void *)sizeof(__check_is_bitmap(bitmap)))) - -static inline int __check_is_bitmap(const unsigned long *bitmap) -{ - return 1; -} - -/* - * Special-case data structure for "single bit set only" constant CPU masks. - * - * We pre-generate all the 64 (or 32) possible bit positions, with enough - * padding to the left and the right, and return the constant pointer - * appropriately offset. - */ -extern const unsigned long - cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)]; - -static inline const struct cpumask *get_cpu_mask(unsigned int cpu) -{ - const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; - p -= cpu / BITS_PER_LONG; - return to_cpumask(p); -} - -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -/* - * In cases where we take the address of the cpumask immediately, - * gcc optimizes it out (it's a constant) and there's no huge stack - * variable created: - */ -#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) - - -#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) - -#if NR_CPUS <= BITS_PER_LONG - -#define CPU_MASK_ALL \ -(cpumask_t) { { \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} } - -#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) - -#else - -#define CPU_MASK_ALL \ -(cpumask_t) { { \ - [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} } - -/* cpu_mask_all is in init/main.c */ -extern cpumask_t cpu_mask_all; -#define CPU_MASK_ALL_PTR (&cpu_mask_all) - -#endif - -#define CPU_MASK_NONE \ -(cpumask_t) { { \ - [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ -} } - -#define CPU_MASK_CPU0 \ -(cpumask_t) { { \ - [0] = 1UL \ -} } - -#define cpus_addr(src) ((src).bits) - -#if NR_CPUS > BITS_PER_LONG -#define CPUMASK_ALLOC(m) struct m *m = kmalloc(sizeof(*m), GFP_KERNEL) -#define CPUMASK_FREE(m) kfree(m) -#else -#define CPUMASK_ALLOC(m) struct m _m, *m = &_m -#define CPUMASK_FREE(m) -#endif -#define CPUMASK_PTR(v, m) cpumask_t *v = &(m->v) - -#define cpu_remap(oldbit, old, new) \ - __cpu_remap((oldbit), &(old), &(new), NR_CPUS) -static inline int __cpu_remap(int oldbit, - const cpumask_t *oldp, const cpumask_t *newp, int nbits) -{ - return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits); -} - -#define cpus_remap(dst, src, old, new) \ - __cpus_remap(&(dst), &(src), &(old), &(new), NR_CPUS) -static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp, - const cpumask_t *oldp, const cpumask_t *newp, int nbits) -{ - bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits); -} - -#define cpus_onto(dst, orig, relmap) \ - __cpus_onto(&(dst), &(orig), &(relmap), NR_CPUS) -static inline void __cpus_onto(cpumask_t *dstp, const cpumask_t *origp, - const cpumask_t *relmapp, int nbits) -{ - bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits); -} - -#define cpus_fold(dst, orig, sz) \ - __cpus_fold(&(dst), &(orig), sz, NR_CPUS) -static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, - int sz, int nbits) -{ - bitmap_fold(dstp->bits, origp->bits, sz, nbits); -} -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ +#define cpumask_bits(maskp) ((maskp)->bits) #if NR_CPUS == 1 - #define nr_cpu_ids 1 -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#define first_cpu(src) ({ (void)(src); 0; }) -#define next_cpu(n, src) ({ (void)(src); 1; }) -#define any_online_cpu(mask) 0 -#define for_each_cpu_mask(cpu, mask) \ - for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ -#else /* NR_CPUS > 1 */ - +#else extern int nr_cpu_ids; -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -int __first_cpu(const cpumask_t *srcp); -int __next_cpu(int n, const cpumask_t *srcp); -int __any_online_cpu(const cpumask_t *mask); - -#define first_cpu(src) __first_cpu(&(src)) -#define next_cpu(n, src) __next_cpu((n), &(src)) -#define any_online_cpu(mask) __any_online_cpu(&(mask)) -#define for_each_cpu_mask(cpu, mask) \ - for ((cpu) = -1; \ - (cpu) = next_cpu((cpu), (mask)), \ - (cpu) < NR_CPUS; ) -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ #endif -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#if NR_CPUS <= 64 - -#define next_cpu_nr(n, src) next_cpu(n, src) -#define cpus_weight_nr(cpumask) cpus_weight(cpumask) -#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) - -#else /* NR_CPUS > 64 */ - -int __next_cpu_nr(int n, const cpumask_t *srcp); -#define next_cpu_nr(n, src) __next_cpu_nr((n), &(src)) -#define cpus_weight_nr(cpumask) __cpus_weight(&(cpumask), nr_cpu_ids) -#define for_each_cpu_mask_nr(cpu, mask) \ - for ((cpu) = -1; \ - (cpu) = next_cpu_nr((cpu), (mask)), \ - (cpu) < nr_cpu_ids; ) - -#endif /* NR_CPUS > 64 */ -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ +#ifdef CONFIG_CPUMASK_OFFSTACK +/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also, + * not all bits may be allocated. */ +#define nr_cpumask_bits nr_cpu_ids +#else +#define nr_cpumask_bits NR_CPUS +#endif /* * The following particular system cpumasks and operations manage @@ -487,12 +80,6 @@ extern const struct cpumask *const cpu_online_mask; extern const struct cpumask *const cpu_present_mask; extern const struct cpumask *const cpu_active_mask; -/* These strip const, as traditionally they weren't const. */ -#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask) -#define cpu_online_map (*(cpumask_t *)cpu_online_mask) -#define cpu_present_map (*(cpumask_t *)cpu_present_mask) -#define cpu_active_map (*(cpumask_t *)cpu_active_mask) - #if NR_CPUS > 1 #define num_online_cpus() cpumask_weight(cpu_online_mask) #define num_possible_cpus() cpumask_weight(cpu_possible_mask) @@ -511,35 +98,6 @@ extern const struct cpumask *const cpu_active_mask; #define cpu_active(cpu) ((cpu) == 0) #endif -#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu)) - -/* These are the new versions of the cpumask operators: passed by pointer. - * The older versions will be implemented in terms of these, then deleted. */ -#define cpumask_bits(maskp) ((maskp)->bits) - -#if NR_CPUS <= BITS_PER_LONG -#define CPU_BITS_ALL \ -{ \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} - -#else /* NR_CPUS > BITS_PER_LONG */ - -#define CPU_BITS_ALL \ -{ \ - [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} -#endif /* NR_CPUS > BITS_PER_LONG */ - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also, - * not all bits may be allocated. */ -#define nr_cpumask_bits nr_cpu_ids -#else -#define nr_cpumask_bits NR_CPUS -#endif - /* verify cpu argument to cpumask_* operators */ static inline unsigned int cpumask_check(unsigned int cpu) { @@ -715,6 +273,18 @@ static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) } /** + * cpumask_test_and_clear_cpu - atomically test and clear a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * test_and_clear_bit wrapper for cpumasks. + */ +static inline int cpumask_test_and_clear_cpu(int cpu, struct cpumask *cpumask) +{ + return test_and_clear_bit(cpumask_check(cpu), cpumask_bits(cpumask)); +} + +/** * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask * @dstp: the cpumask pointer */ @@ -1088,4 +658,241 @@ void set_cpu_active(unsigned int cpu, bool active); void init_cpu_present(const struct cpumask *src); void init_cpu_possible(const struct cpumask *src); void init_cpu_online(const struct cpumask *src); + +/** + * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * + * @bitmap: the bitmap + * + * There are a few places where cpumask_var_t isn't appropriate and + * static cpumasks must be used (eg. very early boot), yet we don't + * expose the definition of 'struct cpumask'. + * + * This does the conversion, and can be used as a constant initializer. + */ +#define to_cpumask(bitmap) \ + ((struct cpumask *)(1 ? (bitmap) \ + : (void *)sizeof(__check_is_bitmap(bitmap)))) + +static inline int __check_is_bitmap(const unsigned long *bitmap) +{ + return 1; +} + +/* + * Special-case data structure for "single bit set only" constant CPU masks. + * + * We pre-generate all the 64 (or 32) possible bit positions, with enough + * padding to the left and the right, and return the constant pointer + * appropriately offset. + */ +extern const unsigned long + cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)]; + +static inline const struct cpumask *get_cpu_mask(unsigned int cpu) +{ + const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; + p -= cpu / BITS_PER_LONG; + return to_cpumask(p); +} + +#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu)) + +#if NR_CPUS <= BITS_PER_LONG +#define CPU_BITS_ALL \ +{ \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +#else /* NR_CPUS > BITS_PER_LONG */ + +#define CPU_BITS_ALL \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} +#endif /* NR_CPUS > BITS_PER_LONG */ + +/* + * + * From here down, all obsolete. Use cpumask_ variants! + * + */ +#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS +/* These strip const, as traditionally they weren't const. */ +#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask) +#define cpu_online_map (*(cpumask_t *)cpu_online_mask) +#define cpu_present_map (*(cpumask_t *)cpu_present_mask) +#define cpu_active_map (*(cpumask_t *)cpu_active_mask) + +#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) + +#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) + +#if NR_CPUS <= BITS_PER_LONG + +#define CPU_MASK_ALL \ +(cpumask_t) { { \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} } + +#else + +#define CPU_MASK_ALL \ +(cpumask_t) { { \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} } + +#endif + +#define CPU_MASK_NONE \ +(cpumask_t) { { \ + [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ +} } + +#define CPU_MASK_CPU0 \ +(cpumask_t) { { \ + [0] = 1UL \ +} } + +#if NR_CPUS == 1 +#define first_cpu(src) ({ (void)(src); 0; }) +#define next_cpu(n, src) ({ (void)(src); 1; }) +#define any_online_cpu(mask) 0 +#define for_each_cpu_mask(cpu, mask) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) +#else /* NR_CPUS > 1 */ +int __first_cpu(const cpumask_t *srcp); +int __next_cpu(int n, const cpumask_t *srcp); +int __any_online_cpu(const cpumask_t *mask); + +#define first_cpu(src) __first_cpu(&(src)) +#define next_cpu(n, src) __next_cpu((n), &(src)) +#define any_online_cpu(mask) __any_online_cpu(&(mask)) +#define for_each_cpu_mask(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = next_cpu((cpu), (mask)), \ + (cpu) < NR_CPUS; ) +#endif /* SMP */ + +#if NR_CPUS <= 64 + +#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) + +#else /* NR_CPUS > 64 */ + +int __next_cpu_nr(int n, const cpumask_t *srcp); +#define for_each_cpu_mask_nr(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = __next_cpu_nr((cpu), &(mask)), \ + (cpu) < nr_cpu_ids; ) + +#endif /* NR_CPUS > 64 */ + +#define cpus_addr(src) ((src).bits) + +#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) +static inline void __cpu_set(int cpu, volatile cpumask_t *dstp) +{ + set_bit(cpu, dstp->bits); +} + +#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst)) +static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp) +{ + clear_bit(cpu, dstp->bits); +} + +#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS) +static inline void __cpus_setall(cpumask_t *dstp, int nbits) +{ + bitmap_fill(dstp->bits, nbits); +} + +#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS) +static inline void __cpus_clear(cpumask_t *dstp, int nbits) +{ + bitmap_zero(dstp->bits, nbits); +} + +/* No static inline type checking - see Subtlety (1) above. */ +#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits) + +#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask)) +static inline int __cpu_test_and_set(int cpu, cpumask_t *addr) +{ + return test_and_set_bit(cpu, addr->bits); +} + +#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS) +static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS) +static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS) +static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_andnot(dst, src1, src2) \ + __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS) +static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS) +static inline int __cpus_equal(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_equal(src1p->bits, src2p->bits, nbits); +} + +#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS) +static inline int __cpus_intersects(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_intersects(src1p->bits, src2p->bits, nbits); +} + +#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS) +static inline int __cpus_subset(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_subset(src1p->bits, src2p->bits, nbits); +} + +#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS) +static inline int __cpus_empty(const cpumask_t *srcp, int nbits) +{ + return bitmap_empty(srcp->bits, nbits); +} + +#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS) +static inline int __cpus_weight(const cpumask_t *srcp, int nbits) +{ + return bitmap_weight(srcp->bits, nbits); +} + +#define cpus_shift_left(dst, src, n) \ + __cpus_shift_left(&(dst), &(src), (n), NR_CPUS) +static inline void __cpus_shift_left(cpumask_t *dstp, + const cpumask_t *srcp, int n, int nbits) +{ + bitmap_shift_left(dstp->bits, srcp->bits, n, nbits); +} +#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ + #endif /* __LINUX_CPUMASK_H */ diff --git a/include/linux/cred.h b/include/linux/cred.h index fb371601a3b..4e3387a89cb 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -176,23 +176,7 @@ extern void __invalid_creds(const struct cred *, const char *, unsigned); extern void __validate_process_creds(struct task_struct *, const char *, unsigned); -static inline bool creds_are_invalid(const struct cred *cred) -{ - if (cred->magic != CRED_MAGIC) - return true; - if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers)) - return true; -#ifdef CONFIG_SECURITY_SELINUX - if (selinux_is_enabled()) { - if ((unsigned long) cred->security < PAGE_SIZE) - return true; - if ((*(u32 *)cred->security & 0xffffff00) == - (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)) - return true; - } -#endif - return false; -} +extern bool creds_are_invalid(const struct cred *cred); static inline void __validate_creds(const struct cred *cred, const char *file, unsigned line) diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index eb5c2ba2f81..fc1b930f246 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -9,7 +9,7 @@ * 2 as published by the Free Software Foundation. * * debugfs is for people to use instead of /proc or /sys. - * See Documentation/DocBook/kernel-api for more details. + * See Documentation/DocBook/filesystems for more details. */ #ifndef _DEBUGFS_H_ diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 3b85ba6479f..94dd10366a7 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -27,6 +27,7 @@ #ifdef CONFIG_EVENTFD +struct file *eventfd_file_create(unsigned int count, int flags); struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx); void eventfd_ctx_put(struct eventfd_ctx *ctx); struct file *eventfd_fget(int fd); @@ -40,6 +41,11 @@ int eventfd_signal(struct eventfd_ctx *ctx, int n); * Ugly ugly ugly error layer to support modules that uses eventfd but * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO. */ +static inline struct file *eventfd_file_create(unsigned int count, int flags) +{ + return ERR_PTR(-ENOSYS); +} + static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) { return ERR_PTR(-ENOSYS); diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 192d1e43c43..7e1d4dec83e 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -134,20 +134,6 @@ struct fw_card { u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4]; }; -static inline struct fw_card *fw_card_get(struct fw_card *card) -{ - kref_get(&card->kref); - - return card; -} - -void fw_card_release(struct kref *kref); - -static inline void fw_card_put(struct fw_card *card) -{ - kref_put(&card->kref, fw_card_release); -} - struct fw_attribute_group { struct attribute_group *groups[2]; struct attribute_group group; diff --git a/include/linux/fs.h b/include/linux/fs.h index 51803528b09..78e95b8b66d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -595,6 +595,7 @@ struct address_space_operations { int (*launder_page) (struct page *); int (*is_partially_uptodate) (struct page *, read_descriptor_t *, unsigned long); + int (*error_remove_page)(struct address_space *, struct page *); }; /* @@ -2467,7 +2468,7 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos); struct ctl_table; -int proc_nr_files(struct ctl_table *table, int write, struct file *filp, +int proc_nr_files(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); int __init get_filesystem_list(char *buf); diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 3c0924a18da..cd3d2abaf30 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -19,7 +19,7 @@ extern int ftrace_enabled; extern int ftrace_enable_sysctl(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); @@ -94,7 +94,7 @@ static inline void ftrace_start(void) { } extern int stack_tracer_enabled; int stack_trace_sysctl(struct ctl_table *table, int write, - struct file *file, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); #endif diff --git a/include/linux/futex.h b/include/linux/futex.h index 34956c8fdeb..8ec17997d94 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -4,11 +4,6 @@ #include <linux/compiler.h> #include <linux/types.h> -struct inode; -struct mm_struct; -struct task_struct; -union ktime; - /* Second argument to futex syscall */ @@ -129,6 +124,11 @@ struct robust_list_head { #define FUTEX_BITSET_MATCH_ANY 0xffffffff #ifdef __KERNEL__ +struct inode; +struct mm_struct; +struct task_struct; +union ktime; + long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout, u32 __user *uaddr2, u32 val2, u32 val3); diff --git a/include/linux/gfp.h b/include/linux/gfp.h index f53e9b868c2..557bdad320b 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -220,7 +220,7 @@ static inline enum zone_type gfp_zone(gfp_t flags) ((1 << ZONES_SHIFT) - 1); if (__builtin_constant_p(bit)) - BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1); + MAYBE_BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1); else { #ifdef CONFIG_DEBUG_VM BUG_ON((GFP_ZONE_BAD >> bit) & 1); diff --git a/include/linux/gpio.h b/include/linux/gpio.h index e10c49a5b96..059bd189d35 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -12,6 +12,8 @@ #include <linux/types.h> #include <linux/errno.h> +struct device; + /* * Some platforms don't support the GPIO programming interface. * @@ -89,6 +91,15 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change) return -EINVAL; } +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + /* GPIO can never have been exported */ + WARN_ON(1); + return -EINVAL; +} + + static inline void gpio_unexport(unsigned gpio) { /* GPIO can never have been exported */ diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 176e7ee73ef..11ab19ac6b3 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -20,9 +20,9 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) } void reset_vma_resv_huge_pages(struct vm_area_struct *vma); -int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); -int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); -int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); +int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); +int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); +int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *); int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index c9087de5c6c..e844a0b1869 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -28,17 +28,6 @@ identify a legacy client. If you don't need them, just don't set them. */ /* - * ---- Driver types ----------------------------------------------------- - */ - -#define I2C_DRIVERID_MSP3400 1 -#define I2C_DRIVERID_TUNER 2 -#define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */ -#define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */ -#define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */ -#define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */ - -/* * ---- Adapter types ---------------------------------------------------- */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index f4784c0fe97..57d41b0abce 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -98,7 +98,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, /** * struct i2c_driver - represent an I2C device driver - * @id: Unique driver ID (optional) * @class: What kind of i2c device we instantiate (for detect) * @attach_adapter: Callback for bus addition (for legacy drivers) * @detach_adapter: Callback for bus removal (for legacy drivers) @@ -135,7 +134,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, * not allowed. */ struct i2c_driver { - int id; unsigned int class; /* Notifies the driver that a new bus has appeared or is about to be diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h new file mode 100644 index 00000000000..fc5db826b48 --- /dev/null +++ b/include/linux/i2c/adp5588.h @@ -0,0 +1,92 @@ +/* + * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ADP5588_H +#define _ADP5588_H + +#define DEV_ID 0x00 /* Device ID */ +#define CFG 0x01 /* Configuration Register1 */ +#define INT_STAT 0x02 /* Interrupt Status Register */ +#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ +#define Key_EVENTA 0x04 /* Key Event Register A */ +#define Key_EVENTB 0x05 /* Key Event Register B */ +#define Key_EVENTC 0x06 /* Key Event Register C */ +#define Key_EVENTD 0x07 /* Key Event Register D */ +#define Key_EVENTE 0x08 /* Key Event Register E */ +#define Key_EVENTF 0x09 /* Key Event Register F */ +#define Key_EVENTG 0x0A /* Key Event Register G */ +#define Key_EVENTH 0x0B /* Key Event Register H */ +#define Key_EVENTI 0x0C /* Key Event Register I */ +#define Key_EVENTJ 0x0D /* Key Event Register J */ +#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ +#define UNLOCK1 0x0F /* Unlock Key1 */ +#define UNLOCK2 0x10 /* Unlock Key2 */ +#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ +#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ +#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ +#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ +#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ +#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ +#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ +#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ +#define GPI_EM1 0x20 /* GPI Event Mode 1 */ +#define GPI_EM2 0x21 /* GPI Event Mode 2 */ +#define GPI_EM3 0x22 /* GPI Event Mode 3 */ +#define GPIO_DIR1 0x23 /* GPIO Data Direction */ +#define GPIO_DIR2 0x24 /* GPIO Data Direction */ +#define GPIO_DIR3 0x25 /* GPIO Data Direction */ +#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ +#define Debounce_DIS1 0x29 /* Debounce Disable */ +#define Debounce_DIS2 0x2A /* Debounce Disable */ +#define Debounce_DIS3 0x2B /* Debounce Disable */ +#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ +#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ +#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ +#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ +#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ +#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ +#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ +#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ +#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ +#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ +#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ +#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ +#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ +#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ +#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ +#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ +#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ +#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ + +#define ADP5588_DEVICE_ID_MASK 0xF + +/* Put one of these structures in i2c_board_info platform_data */ + +#define ADP5588_KEYMAPSIZE 80 + +struct adp5588_kpad_platform_data { + int rows; /* Number of rows */ + int cols; /* Number of columns */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + unsigned repeat:1; /* Enable key repeat */ + unsigned en_keylock:1; /* Enable Key Lock feature */ + unsigned short unlock_key1; /* Unlock Key 1 */ + unsigned short unlock_key2; /* Unlock Key 2 */ +}; + +#endif diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h new file mode 100644 index 00000000000..5a117b5ca15 --- /dev/null +++ b/include/linux/i2c/mcs5000_ts.h @@ -0,0 +1,24 @@ +/* + * mcs5000_ts.h + * + * Copyright (C) 2009 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MCS5000_TS_H +#define __LINUX_MCS5000_TS_H + +/* platform data for the MELFAS MCS-5000 touchscreen driver */ +struct mcs5000_ts_platform_data { + void (*cfg_pin)(void); + int x_size; + int y_size; +}; + +#endif /* __LINUX_MCS5000_TS_H */ diff --git a/include/linux/i8042.h b/include/linux/i8042.h index 7907a72403e..60c3360ef6a 100644 --- a/include/linux/i8042.h +++ b/include/linux/i8042.h @@ -7,6 +7,7 @@ * the Free Software Foundation. */ +#include <linux/types.h> /* * Standard commands. @@ -30,6 +31,35 @@ #define I8042_CMD_MUX_PFX 0x0090 #define I8042_CMD_MUX_SEND 0x1090 +struct serio; + +#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE) + +void i8042_lock_chip(void); +void i8042_unlock_chip(void); int i8042_command(unsigned char *param, int command); +bool i8042_check_port_owner(const struct serio *); + +#else + +void i8042_lock_chip(void) +{ +} + +void i8042_unlock_chip(void) +{ +} + +int i8042_command(unsigned char *param, int command) +{ + return -ENOSYS; +} + +bool i8042_check_port_owner(const struct serio *serio) +{ + return false; +} + +#endif #endif diff --git a/include/linux/input.h b/include/linux/input.h index 8b3bc3e0d14..0ccfc30cd40 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1123,7 +1123,7 @@ struct input_dev { struct mutex mutex; unsigned int users; - int going_away; + bool going_away; struct device dev; diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 482dc91fd53..4f0a72a9740 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -360,4 +360,6 @@ extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep, extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int dmar_ir_support(void); + #endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 8e9e151f811..b78cf819495 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -84,7 +84,6 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * struct irqaction - per interrupt action descriptor * @handler: interrupt handler function * @flags: flags (see IRQF_* above) - * @mask: no comment as it is useless and about to be removed * @name: name of the device * @dev_id: cookie to identify the device * @next: pointer to the next irqaction for shared interrupts @@ -97,7 +96,6 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); struct irqaction { irq_handler_t handler; unsigned long flags; - cpumask_t mask; const char *name; void *dev_id; struct irqaction *next; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 786e7b8cece..83aa81297ea 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -184,5 +184,9 @@ extern void __devm_release_region(struct device *dev, struct resource *parent, extern int iomem_map_sanity_check(resource_size_t addr, unsigned long size); extern int iomem_is_exclusive(u64 addr); +extern int +walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, + void *arg, int (*func)(unsigned long, unsigned long, void *)); + #endif /* __ASSEMBLY__ */ #endif /* _LINUX_IOPORT_H */ diff --git a/include/linux/iova.h b/include/linux/iova.h index 228f6c94b69..76a0759e88e 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -28,7 +28,6 @@ struct iova { /* holds all the iova translations for a domain */ struct iova_domain { - spinlock_t iova_alloc_lock;/* Lock to protect iova allocation */ spinlock_t iova_rbtree_lock; /* Lock to protect update of rbtree */ struct rb_root rbroot; /* iova domain rbtree root */ struct rb_node *cached32_node; /* Save last alloced node */ diff --git a/include/linux/jbd.h b/include/linux/jbd.h index a1187a0c99b..331530cd3cc 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -556,7 +556,7 @@ struct transaction_s * This transaction is being forced and some process is * waiting for it to finish. */ - int t_synchronous_commit:1; + unsigned int t_synchronous_commit:1; }; /** diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2b5b1e0899a..d3cd23f3003 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -146,7 +146,7 @@ extern int _cond_resched(void); #define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0) #define abs(x) ({ \ - int __x = (x); \ + long __x = (x); \ (__x < 0) ? -__x : __x; \ }) @@ -246,14 +246,16 @@ extern int printk_ratelimit(void); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); +extern int printk_delay_msec; + /* * Print a one-time message (analogous to WARN_ONCE() et al): */ #define printk_once(x...) ({ \ - static int __print_once = 1; \ + static bool __print_once = true; \ \ if (__print_once) { \ - __print_once = 0; \ + __print_once = false; \ printk(x); \ } \ }) @@ -676,13 +678,17 @@ struct sysinfo { }; /* Force a compilation error if condition is true */ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition)) + +/* Force a compilation error if condition is constant and true */ +#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)])) /* Force a compilation error if condition is true, but also produce a result (of value 0 and type size_t), so the expression can be used e.g. in a structure initializer (or where-ever else comma expressions aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1) +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index c8006607f94..e880d4cf9e2 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -145,12 +145,14 @@ static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size) #define kmemcheck_annotate_bitfield(ptr, name) \ do { \ + int _n; \ + \ if (!ptr) \ break; \ \ - int _n = (long) &((ptr)->name##_end) \ + _n = (long) &((ptr)->name##_end) \ - (long) &((ptr)->name##_begin); \ - BUILD_BUG_ON(_n < 0); \ + MAYBE_BUILD_BUG_ON(_n < 0); \ \ kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ } while (0) diff --git a/include/linux/libps2.h b/include/linux/libps2.h index fcf5fbe6a50..79603a6c356 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -44,6 +44,8 @@ struct ps2dev { void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); +void ps2_begin_command(struct ps2dev *ps2dev); +void ps2_end_command(struct ps2dev *ps2dev); int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 691f59171c6..5126cceb6ae 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -57,6 +57,7 @@ #ifdef __ASSEMBLY__ +#ifndef LINKER_SCRIPT #define ALIGN __ALIGN #define ALIGN_STR __ALIGN_STR @@ -66,6 +67,7 @@ ALIGN; \ name: #endif +#endif /* LINKER_SCRIPT */ #ifndef WEAK #define WEAK(name) \ diff --git a/include/linux/magic.h b/include/linux/magic.h index 1923327b986..76285e01b39 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -12,7 +12,9 @@ #define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c +#define RAMFS_MAGIC 0x858458f6 /* some random number */ #define TMPFS_MAGIC 0x01021994 +#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ #define SQUASHFS_MAGIC 0x73717368 #define EFS_SUPER_MAGIC 0x414A53 #define EXT2_SUPER_MAGIC 0xEF53 @@ -53,4 +55,8 @@ #define INOTIFYFS_SUPER_MAGIC 0x2BAD1DEA #define STACK_END_MAGIC 0x57AC6E9D + +#define DEVPTS_SUPER_MAGIC 0x1cd1 +#define SOCKFS_MAGIC 0x534F434B + #endif /* __LINUX_MAGIC_H__ */ diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index e46a0734ab6..bf9213b2db8 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -118,6 +118,9 @@ static inline bool mem_cgroup_disabled(void) extern bool mem_cgroup_oom_called(struct task_struct *task); void mem_cgroup_update_mapped_file_stat(struct page *page, int val); +unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, + gfp_t gfp_mask, int nid, + int zid); #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct mem_cgroup; @@ -276,6 +279,13 @@ static inline void mem_cgroup_update_mapped_file_stat(struct page *page, { } +static inline +unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, + gfp_t gfp_mask, int nid, int zid) +{ + return 0; +} + #endif /* CONFIG_CGROUP_MEM_CONT */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index d95f72e79b8..fed969281a4 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -191,14 +191,6 @@ static inline void register_page_bootmem_info_node(struct pglist_data *pgdat) #endif /* ! CONFIG_MEMORY_HOTPLUG */ -/* - * Walk through all memory which is registered as resource. - * arg is (start_pfn, nr_pages, private_arg_pointer) - */ -extern int walk_memory_resource(unsigned long start_pfn, - unsigned long nr_pages, void *arg, - int (*func)(unsigned long, unsigned long, void *)); - #ifdef CONFIG_MEMORY_HOTREMOVE extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages); diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h index 115dbe96508..c63b65c9442 100644 --- a/include/linux/mfd/da903x.h +++ b/include/linux/mfd/da903x.h @@ -1,7 +1,7 @@ #ifndef __LINUX_PMIC_DA903X_H #define __LINUX_PMIC_DA903X_H -/* Unified sub device IDs for DA9030/DA9034 */ +/* Unified sub device IDs for DA9030/DA9034/DA9035 */ enum { DA9030_ID_LED_1, DA9030_ID_LED_2, @@ -57,6 +57,8 @@ enum { DA9034_ID_LDO13, DA9034_ID_LDO14, DA9034_ID_LDO15, + + DA9035_ID_BUCK3, }; /* diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h new file mode 100644 index 00000000000..b18cbb027bc --- /dev/null +++ b/include/linux/mfd/wm831x/pmu.h @@ -0,0 +1,189 @@ +/* + * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PMU_H__ +#define __MFD_WM831X_PMU_H__ + +/* + * R16387 (0x4003) - Power State + */ +#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */ +#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */ +#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */ +#define WM831X_REF_LP 0x1000 /* REF_LP */ +#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */ +#define WM831X_REF_LP_SHIFT 12 /* REF_LP */ +#define WM831X_REF_LP_WIDTH 1 /* REF_LP */ +#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */ +#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */ +#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */ + +/* + * R16397 (0x400D) - System Status + */ +#define WM831X_THW_STS 0x8000 /* THW_STS */ +#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */ +#define WM831X_THW_STS_SHIFT 15 /* THW_STS */ +#define WM831X_THW_STS_WIDTH 1 /* THW_STS */ +#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */ +#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */ +#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */ +#define WM831X_PWR_USB 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */ +#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */ +#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */ + +/* + * R16456 (0x4048) - Charger Control 1 + */ +#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */ +#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */ +#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */ +#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */ +#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */ +#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */ +#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */ + +/* + * R16457 (0x4049) - Charger Control 2 + */ +#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */ +#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */ + +/* + * R16458 (0x404A) - Charger Status + */ +#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */ +#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */ +#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */ +#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */ +#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */ +#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */ +#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */ + +#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT) + +/* + * R16459 (0x404B) - Backup Charger Control + */ +#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */ +#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */ + +#endif diff --git a/include/linux/mm.h b/include/linux/mm.h index 5946e2ff9fe..6953a5a53e4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -285,6 +285,14 @@ static inline int is_vmalloc_addr(const void *x) return 0; #endif } +#ifdef CONFIG_MMU +extern int is_vmalloc_or_module_addr(const void *x); +#else +static int is_vmalloc_or_module_addr(const void *x) +{ + return 0; +} +#endif static inline struct page *compound_head(struct page *page) { @@ -687,11 +695,12 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_SIGBUS 0x0002 #define VM_FAULT_MAJOR 0x0004 #define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */ +#define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned page */ #define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */ #define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */ -#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS) +#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON) /* * Can be called by the pagefault handler when it gets a VM_FAULT_OOM. @@ -786,6 +795,11 @@ static inline void unmap_shared_mapping_range(struct address_space *mapping, extern int vmtruncate(struct inode * inode, loff_t offset); extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end); +int truncate_inode_page(struct address_space *mapping, struct page *page); +int generic_error_remove_page(struct address_space *mapping, struct page *page); + +int invalidate_inode_page(struct page *page); + #ifdef CONFIG_MMU extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, unsigned int flags); @@ -1271,7 +1285,7 @@ int in_gate_area_no_task(unsigned long addr); #define in_gate_area(task, addr) ({(void)task; in_gate_area_no_task(addr);}) #endif /* __HAVE_ARCH_GATE_AREA */ -int drop_caches_sysctl_handler(struct ctl_table *, int, struct file *, +int drop_caches_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask, unsigned long lru_pages); @@ -1300,5 +1314,12 @@ void vmemmap_populate_print_last(void); extern int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim, size_t size); extern void refund_locked_memory(struct mm_struct *mm, size_t size); + +extern void memory_failure(unsigned long pfn, int trapno); +extern int __memory_failure(unsigned long pfn, int trapno, int ref); +extern int sysctl_memory_failure_early_kill; +extern int sysctl_memory_failure_recovery; +extern atomic_long_t mce_bad_pages; + #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 0042090a4d7..21d6aa45206 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -240,6 +240,8 @@ struct mm_struct { unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */ + struct linux_binfmt *binfmt; + cpumask_t cpu_vm_mask; /* Architecture-specific MM context */ @@ -259,11 +261,10 @@ struct mm_struct { unsigned long flags; /* Must use atomic bitops to access the bits */ struct core_state *core_state; /* coredumping support */ - - /* aio bits */ +#ifdef CONFIG_AIO spinlock_t ioctx_lock; struct hlist_head ioctx_list; - +#endif #ifdef CONFIG_MM_OWNER /* * "owner" points to a task that is regarded as the canonical diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 403aa505f27..2ee22e8af11 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -40,6 +40,8 @@ struct mmc_csd { }; struct mmc_ext_csd { + u8 rev; + unsigned int sa_timeout; /* Units: 100ns */ unsigned int hs_max_dtr; unsigned int sectors; }; @@ -62,7 +64,8 @@ struct sdio_cccr { low_speed:1, wide_bus:1, high_power:1, - high_speed:1; + high_speed:1, + disable_cd:1; }; struct sdio_cis { @@ -94,6 +97,8 @@ struct mmc_card { #define MMC_STATE_READONLY (1<<1) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ + unsigned int quirks; /* card quirks */ +#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ @@ -129,6 +134,11 @@ struct mmc_card { #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) +static inline int mmc_card_lenient_fn0(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LENIENT_FN0; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 7ac8b500d55..e4898e9eeb5 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); +extern int mmc_try_claim_host(struct mmc_host *host); /** * mmc_claim_host - exclusively claim a host diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 3e7615e9087..81bb4235859 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -51,6 +51,35 @@ struct mmc_ios { }; struct mmc_host_ops { + /* + * Hosts that support power saving can use the 'enable' and 'disable' + * methods to exit and enter power saving states. 'enable' is called + * when the host is claimed and 'disable' is called (or scheduled with + * a delay) when the host is released. The 'disable' is scheduled if + * the disable delay set by 'mmc_set_disable_delay()' is non-zero, + * otherwise 'disable' is called immediately. 'disable' may be + * scheduled repeatedly, to permit ever greater power saving at the + * expense of ever greater latency to re-enable. Rescheduling is + * determined by the return value of the 'disable' method. A positive + * value gives the delay in milliseconds. + * + * In the case where a host function (like set_ios) may be called + * with or without the host claimed, enabling and disabling can be + * done directly and will nest correctly. Call 'mmc_host_enable()' and + * 'mmc_host_lazy_disable()' for this purpose, but note that these + * functions must be paired. + * + * Alternatively, 'mmc_host_enable()' may be paired with + * 'mmc_host_disable()' which calls 'disable' immediately. In this + * case the 'disable' method will be called with 'lazy' set to 0. + * This is mainly useful for error paths. + * + * Because lazy disable may be called from a work queue, the 'disable' + * method must claim the host when 'lazy' != 0, which will work + * correctly because recursion is detected and handled. + */ + int (*enable)(struct mmc_host *host); + int (*disable)(struct mmc_host *host, int lazy); void (*request)(struct mmc_host *host, struct mmc_request *req); /* * Avoid calling these three functions too often or in a "fast path", @@ -118,6 +147,9 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ +#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ +#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ @@ -142,9 +174,18 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif + /* Only used with MMC_CAP_DISABLE */ + int enabled; /* host is enabled */ + int nesting_cnt; /* "enable" nesting count */ + int en_dis_recurs; /* detect recursion */ + unsigned int disable_delay; /* disable delay in msecs */ + struct delayed_work disable; /* disabling work */ + struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; + struct task_struct *claimer; /* task that has host claimed */ + int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; @@ -183,6 +224,9 @@ static inline void *mmc_priv(struct mmc_host *host) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); +extern void mmc_power_save_host(struct mmc_host *host); +extern void mmc_power_restore_host(struct mmc_host *host); + extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); @@ -197,5 +241,19 @@ struct regulator; int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); + +int mmc_host_enable(struct mmc_host *host); +int mmc_host_disable(struct mmc_host *host); +int mmc_host_lazy_disable(struct mmc_host *host); + +static inline void mmc_set_disable_delay(struct mmc_host *host, + unsigned int disable_delay) +{ + host->disable_delay = disable_delay; +} + #endif diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 14b81f3e523..c02c8db7370 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -31,6 +31,7 @@ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */ #define MMC_SWITCH 6 /* ac [31:0] See below R1b */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ #define MMC_SEND_EXT_CSD 8 /* adtc R1 */ @@ -127,6 +128,7 @@ #define R1_STATUS(x) (x & 0xFFFFE000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_SWITCH_ERROR (1 << 7) /* sx, c */ #define R1_APP_CMD (1 << 5) /* sr, c */ /* @@ -254,6 +256,7 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ +#define EXT_CSD_S_A_TIMEOUT 217 /* * EXT_CSD field definitions diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 451bdfc8583..ac3ab683fec 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -67,6 +67,7 @@ struct sdio_func { #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev) #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d) +#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev) /* * SDIO function device driver @@ -81,6 +82,8 @@ struct sdio_driver { struct device_driver drv; }; +#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv) + /** * SDIO_DEVICE - macro used to describe a specific SDIO device * @vend: the 16 bit manufacturer code diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 652ef01be58..6f7561730d8 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -755,21 +755,20 @@ static inline int is_dma(struct zone *zone) /* These two functions are used to setup the per zone pages min values */ struct ctl_table; -struct file; -int min_free_kbytes_sysctl_handler(struct ctl_table *, int, struct file *, +int min_free_kbytes_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1]; -int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *, +int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); -int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, struct file *, +int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern int numa_zonelist_order_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern char numa_zonelist_order[]; #define NUMA_ZONELIST_ORDER_LEN 16 /* string buffer size */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 1bf5900ffe4..f58e9d836f3 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -399,6 +399,17 @@ struct i2c_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; +/* spi */ + +#define SPI_NAME_SIZE 32 +#define SPI_MODULE_PREFIX "spi:" + +struct spi_device_id { + char name[SPI_NAME_SIZE]; + kernel_ulong_t driver_data /* Data private to the driver */ + __attribute__((aligned(sizeof(kernel_ulong_t)))); +}; + /* dmi */ enum dmi_field { DMI_NONE, diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 4030ebada49..7a232a9bdd6 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -121,6 +121,7 @@ typedef enum { NAND_ECC_SOFT, NAND_ECC_HW, NAND_ECC_HW_SYNDROME, + NAND_ECC_HW_OOB_FIRST, } nand_ecc_modes_t; /* @@ -271,13 +272,13 @@ struct nand_ecc_ctrl { uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf); + uint8_t *buf, int page); void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf); + uint8_t *buf, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h index 090da505425..052ea8ca243 100644 --- a/include/linux/mtd/nand_ecc.h +++ b/include/linux/mtd/nand_ecc.h @@ -21,6 +21,12 @@ struct mtd_info; int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); /* + * Detect and correct a 1 bit error for eccsize byte block + */ +int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc, + unsigned int eccsize); + +/* * Detect and correct a 1 bit error for 256 byte block */ int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 8ed87337438..4e49f335067 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -214,4 +214,12 @@ unsigned onenand_block(struct onenand_chip *this, loff_t addr); loff_t onenand_addr(struct onenand_chip *this, int block); int flexonenand_region(struct mtd_info *mtd, loff_t addr); +struct mtd_partition; + +struct onenand_platform_data { + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + struct mtd_partition *parts; + unsigned int nr_parts; +}; + #endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 86a6bbef646..acadbf53a69 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -207,6 +207,9 @@ #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) #define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010) +#define ONENAND_ECC_3BIT (1 << 2) +#define ONENAND_ECC_4BIT (1 << 3) +#define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010) /* * One-Time Programmable (OTP) diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 03bbe903910..510ffdd5020 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -60,7 +60,7 @@ extern spinlock_t nfsd_drc_lock; extern unsigned int nfsd_drc_max_mem; extern unsigned int nfsd_drc_mem_used; -extern struct seq_operations nfs_exports_op; +extern const struct seq_operations nfs_exports_op; /* * Function prototypes. diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 13de789f0a5..6b202b17395 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -51,6 +51,9 @@ * PG_buddy is set to indicate that the page is free and in the buddy system * (see mm/page_alloc.c). * + * PG_hwpoison indicates that a page got corrupted in hardware and contains + * data with incorrect ECC bits that triggered a machine check. Accessing is + * not safe since it may cause another machine check. Don't touch! */ /* @@ -102,6 +105,9 @@ enum pageflags { #ifdef CONFIG_ARCH_USES_PG_UNCACHED PG_uncached, /* Page has been mapped as uncached */ #endif +#ifdef CONFIG_MEMORY_FAILURE + PG_hwpoison, /* hardware poisoned page. Don't touch */ +#endif __NR_PAGEFLAGS, /* Filesystems */ @@ -269,6 +275,15 @@ PAGEFLAG(Uncached, uncached) PAGEFLAG_FALSE(Uncached) #endif +#ifdef CONFIG_MEMORY_FAILURE +PAGEFLAG(HWPoison, hwpoison) +TESTSETFLAG(HWPoison, hwpoison) +#define __PG_HWPOISON (1UL << PG_hwpoison) +#else +PAGEFLAG_FALSE(HWPoison) +#define __PG_HWPOISON 0 +#endif + static inline int PageUptodate(struct page *page) { int ret = test_bit(PG_uptodate, &(page)->flags); @@ -393,7 +408,7 @@ static inline void __ClearPageTail(struct page *page) 1 << PG_private | 1 << PG_private_2 | \ 1 << PG_buddy | 1 << PG_writeback | 1 << PG_reserved | \ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active | \ - 1 << PG_unevictable | __PG_MLOCKED) + 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON) /* * Flags checked when a page is prepped for return by the page allocator. diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index ada779f2417..4b938d4f3ac 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -38,6 +38,7 @@ enum { PCG_LOCK, /* page cgroup is locked */ PCG_CACHE, /* charged as cache */ PCG_USED, /* this object is in use. */ + PCG_ACCT_LRU, /* page has been accounted for */ }; #define TESTPCGFLAG(uname, lname) \ @@ -52,11 +53,23 @@ static inline void SetPageCgroup##uname(struct page_cgroup *pc)\ static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \ { clear_bit(PCG_##lname, &pc->flags); } +#define TESTCLEARPCGFLAG(uname, lname) \ +static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \ + { return test_and_clear_bit(PCG_##lname, &pc->flags); } + /* Cache flag is set only once (at allocation) */ TESTPCGFLAG(Cache, CACHE) +CLEARPCGFLAG(Cache, CACHE) +SETPCGFLAG(Cache, CACHE) TESTPCGFLAG(Used, USED) CLEARPCGFLAG(Used, USED) +SETPCGFLAG(Used, USED) + +SETPCGFLAG(AcctLRU, ACCT_LRU) +CLEARPCGFLAG(AcctLRU, ACCT_LRU) +TESTPCGFLAG(AcctLRU, ACCT_LRU) +TESTCLEARPCGFLAG(AcctLRU, ACCT_LRU) static inline int page_cgroup_nid(struct page_cgroup *pc) { diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 6f9623710f2..da1fda8623e 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,6 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 +#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 594c494ac3f..b5d096d3a9b 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -39,6 +39,13 @@ enum { }; enum { + POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, + POWER_SUPPLY_CHARGE_TYPE_NONE, + POWER_SUPPLY_CHARGE_TYPE_TRICKLE, + POWER_SUPPLY_CHARGE_TYPE_FAST, +}; + +enum { POWER_SUPPLY_HEALTH_UNKNOWN = 0, POWER_SUPPLY_HEALTH_GOOD, POWER_SUPPLY_HEALTH_OVERHEAT, @@ -58,9 +65,19 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, + POWER_SUPPLY_CAPACITY_LEVEL_LOW, + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, + POWER_SUPPLY_CAPACITY_LEVEL_HIGH, + POWER_SUPPLY_CAPACITY_LEVEL_FULL, +}; + enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, @@ -89,6 +106,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, @@ -126,6 +144,7 @@ struct power_supply { enum power_supply_property psp, union power_supply_propval *val); void (*external_power_changed)(struct power_supply *psy); + void (*set_charged)(struct power_supply *psy); /* For APM emulation, think legacy userspace. */ int use_for_apm; @@ -165,8 +184,10 @@ struct power_supply_info { int use_for_apm; }; +extern struct power_supply *power_supply_get_by_name(char *name); extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); +extern int power_supply_set_battery_charged(struct power_supply *psy); #if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE) extern int power_supply_is_system_supplied(void); diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 07bff666e65..931150566ad 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -88,4 +88,6 @@ #define PR_TASK_PERF_EVENTS_DISABLE 31 #define PR_TASK_PERF_EVENTS_ENABLE 32 +#define PR_MCE_KILL 33 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index e6e77d31c41..379eaed72d4 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -78,10 +78,19 @@ struct proc_dir_entry { struct list_head pde_openers; /* who did ->open, but not ->release */ }; +enum kcore_type { + KCORE_TEXT, + KCORE_VMALLOC, + KCORE_RAM, + KCORE_VMEMMAP, + KCORE_OTHER, +}; + struct kcore_list { - struct kcore_list *next; + struct list_head list; unsigned long addr; size_t size; + int type; }; struct vmcore { @@ -233,11 +242,12 @@ static inline void dup_mm_exe_file(struct mm_struct *oldmm, #endif /* CONFIG_PROC_FS */ #if !defined(CONFIG_PROC_KCORE) -static inline void kclist_add(struct kcore_list *new, void *addr, size_t size) +static inline void +kclist_add(struct kcore_list *new, void *addr, size_t size, int type) { } #else -extern void kclist_add(struct kcore_list *, void *, size_t); +extern void kclist_add(struct kcore_list *, void *, size_t, int type); #endif union proc_op { diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 277f4b964df..490c5b37b6d 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -125,6 +125,8 @@ struct regulator_bulk_data { /* regulator get and put */ struct regulator *__must_check regulator_get(struct device *dev, const char *id); +struct regulator *__must_check regulator_get_exclusive(struct device *dev, + const char *id); void regulator_put(struct regulator *regulator); /* regulator output control and status */ @@ -144,6 +146,8 @@ void regulator_bulk_free(int num_consumers, int regulator_count_voltages(struct regulator *regulator); int regulator_list_voltage(struct regulator *regulator, unsigned selector); +int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ce1be708ca1..31f2055eae2 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -37,7 +37,8 @@ enum regulator_status { * * @enable: Configure the regulator as enabled. * @disable: Configure the regulator as disabled. - * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. + * @is_enabled: Return 1 if the regulator is enabled, 0 if not. + * May also return negative errno. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. @@ -162,6 +163,8 @@ struct regulator_desc { struct regulator_dev { struct regulator_desc *desc; int use_count; + int open_count; + int exclusive; /* lists we belong to */ struct list_head list; /* list of all regulators */ diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 91b4da31f1b..e94a4a1c7c8 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -5,6 +5,9 @@ * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros <ext-roger.quadros@nokia.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the @@ -16,9 +19,30 @@ struct regulator_init_data; +/** + * struct fixed_voltage_config - fixed_voltage_config structure + * @supply_name: Name of the regulator supply + * @microvolts: Output voltage of regulator + * @gpio: GPIO to use for enable control + * set to -EINVAL if not used + * @enable_high: Polarity of enable GPIO + * 1 = Active high, 0 = Active low + * @enabled_at_boot: Whether regulator has been enabled at + * boot or not. 1 = Yes, 0 = No + * This is used to keep the regulator at + * the default state + * @init_data: regulator_init_data + * + * This structure contains fixed voltage regulator configuration + * information that must be passed by platform code to the fixed + * voltage regulator driver. + */ struct fixed_voltage_config { const char *supply_name; int microvolts; + int gpio; + unsigned enable_high:1; + unsigned enabled_at_boot:1; struct regulator_init_data *init_data; }; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index bac64fa390f..87f5f176d4e 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -41,7 +41,7 @@ struct regulator; #define REGULATOR_CHANGE_DRMS 0x10 /** - * struct regulator_state - regulator state during low power syatem states + * struct regulator_state - regulator state during low power system states * * This describes a regulators state during a system wide low power state. * @@ -117,25 +117,37 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; - /* constriant flags */ + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ - unsigned apply_uV:1; /* apply uV constraint iff min == max */ + unsigned apply_uV:1; /* apply uV constraint if min == max */ }; /** * struct regulator_consumer_supply - supply -> device mapping * - * This maps a supply name to a device. + * This maps a supply name to a device. Only one of dev or dev_name + * can be specified. Use of dev_name allows support for buses which + * make struct device available late such as I2C and is the preferred + * form. * * @dev: Device structure for the consumer. + * @dev_name: Result of dev_name() for the consumer. * @supply: Name for the supply. */ struct regulator_consumer_supply { struct device *dev; /* consumer */ + const char *dev_name; /* dev_name() for consumer */ const char *supply; /* consumer supply - e.g. "vcc" */ }; +/* Initialize struct regulator_consumer_supply */ +#define REGULATOR_SUPPLY(_name, _dev_name) \ +{ \ + .supply = _name, \ + .dev_name = _dev_name, \ +} + /** * struct regulator_init_data - regulator platform initialisation data. * @@ -166,6 +178,12 @@ struct regulator_init_data { int regulator_suspend_prepare(suspend_state_t state); +#ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); +#else +static inline void regulator_has_full_constraints(void) +{ +} +#endif #endif diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 44563192bf1..de9a7fae20b 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -36,7 +36,7 @@ * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) * @name: regulator cute name (example for V3: "vcc_core") - * @platform_data: regulator init data (contraints, supplies, ...) + * @platform_data: regulator init data (constraints, supplies, ...) */ struct max1586_subdev_data { int id; @@ -46,7 +46,7 @@ struct max1586_subdev_data { /** * max1586_platform_data - platform data for max1586 - * @num_subdevs: number of regultors used (may be 1 or 2) + * @num_subdevs: number of regulators used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. * @v3_gain: gain on the V3 voltage output multiplied by 1e6. diff --git a/include/linux/relay.h b/include/linux/relay.h index 953fc055e87..14a86bc7102 100644 --- a/include/linux/relay.h +++ b/include/linux/relay.h @@ -140,7 +140,7 @@ struct rchan_callbacks * cause relay_open() to create a single global buffer rather * than the default set of per-cpu buffers. * - * See Documentation/filesystems/relayfs.txt for more info. + * See Documentation/filesystems/relay.txt for more info. */ struct dentry *(*create_buf_file)(const char *filename, struct dentry *parent, diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 511f42fc681..731af71cddc 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -35,6 +35,10 @@ struct res_counter { */ unsigned long long limit; /* + * the limit that usage can be exceed + */ + unsigned long long soft_limit; + /* * the number of unsuccessful attempts to consume the resource */ unsigned long long failcnt; @@ -87,6 +91,7 @@ enum { RES_MAX_USAGE, RES_LIMIT, RES_FAILCNT, + RES_SOFT_LIMIT, }; /* @@ -109,7 +114,8 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent); int __must_check res_counter_charge_locked(struct res_counter *counter, unsigned long val); int __must_check res_counter_charge(struct res_counter *counter, - unsigned long val, struct res_counter **limit_fail_at); + unsigned long val, struct res_counter **limit_fail_at, + struct res_counter **soft_limit_at); /* * uncharge - tell that some portion of the resource is released @@ -122,7 +128,8 @@ int __must_check res_counter_charge(struct res_counter *counter, */ void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val); -void res_counter_uncharge(struct res_counter *counter, unsigned long val); +void res_counter_uncharge(struct res_counter *counter, unsigned long val, + bool *was_soft_limit_excess); static inline bool res_counter_limit_check_locked(struct res_counter *cnt) { @@ -132,6 +139,36 @@ static inline bool res_counter_limit_check_locked(struct res_counter *cnt) return false; } +static inline bool res_counter_soft_limit_check_locked(struct res_counter *cnt) +{ + if (cnt->usage < cnt->soft_limit) + return true; + + return false; +} + +/** + * Get the difference between the usage and the soft limit + * @cnt: The counter + * + * Returns 0 if usage is less than or equal to soft limit + * The difference between usage and soft limit, otherwise. + */ +static inline unsigned long long +res_counter_soft_limit_excess(struct res_counter *cnt) +{ + unsigned long long excess; + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + if (cnt->usage <= cnt->soft_limit) + excess = 0; + else + excess = cnt->usage - cnt->soft_limit; + spin_unlock_irqrestore(&cnt->lock, flags); + return excess; +} + /* * Helper function to detect if the cgroup is within it's limit or * not. It's currently called from cgroup_rss_prepare() @@ -147,6 +184,17 @@ static inline bool res_counter_check_under_limit(struct res_counter *cnt) return ret; } +static inline bool res_counter_check_under_soft_limit(struct res_counter *cnt) +{ + bool ret; + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + ret = res_counter_soft_limit_check_locked(cnt); + spin_unlock_irqrestore(&cnt->lock, flags); + return ret; +} + static inline void res_counter_reset_max(struct res_counter *cnt) { unsigned long flags; @@ -180,4 +228,16 @@ static inline int res_counter_set_limit(struct res_counter *cnt, return ret; } +static inline int +res_counter_set_soft_limit(struct res_counter *cnt, + unsigned long long soft_limit) +{ + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + cnt->soft_limit = soft_limit; + spin_unlock_irqrestore(&cnt->lock, flags); + return 0; +} + #endif diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 477841d29fc..cb0ba703260 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -81,7 +81,19 @@ static inline void page_dup_rmap(struct page *page) */ int page_referenced(struct page *, int is_locked, struct mem_cgroup *cnt, unsigned long *vm_flags); -int try_to_unmap(struct page *, int ignore_refs); +enum ttu_flags { + TTU_UNMAP = 0, /* unmap mode */ + TTU_MIGRATION = 1, /* migration mode */ + TTU_MUNLOCK = 2, /* munlock mode */ + TTU_ACTION_MASK = 0xff, + + TTU_IGNORE_MLOCK = (1 << 8), /* ignore mlock */ + TTU_IGNORE_ACCESS = (1 << 9), /* don't age */ + TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */ +}; +#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK) + +int try_to_unmap(struct page *, enum ttu_flags flags); /* * Called from mm/filemap_xip.c to unmap empty zero page @@ -108,6 +120,13 @@ int page_mkclean(struct page *); */ int try_to_munlock(struct page *); +/* + * Called by memory-failure.c to kill processes. + */ +struct anon_vma *page_lock_anon_vma(struct page *page); +void page_unlock_anon_vma(struct anon_vma *anon_vma); +int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma); + #else /* !CONFIG_MMU */ #define anon_vma_init() do {} while (0) diff --git a/include/linux/sched.h b/include/linux/sched.h index 97b10da0a3e..75e6e60bf58 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -309,7 +309,7 @@ extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); extern void touch_all_softlockup_watchdogs(void); extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, + void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; extern int softlockup_thresh; @@ -331,7 +331,7 @@ extern unsigned long sysctl_hung_task_check_count; extern unsigned long sysctl_hung_task_timeout_secs; extern unsigned long sysctl_hung_task_warnings; extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, + void __user *buffer, size_t *lenp, loff_t *ppos); #endif @@ -426,6 +426,15 @@ static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm) return max(mm->hiwater_rss, get_mm_rss(mm)); } +static inline void setmax_mm_hiwater_rss(unsigned long *maxrss, + struct mm_struct *mm) +{ + unsigned long hiwater_rss = get_mm_hiwater_rss(mm); + + if (*maxrss < hiwater_rss) + *maxrss = hiwater_rss; +} + static inline unsigned long get_mm_hiwater_vm(struct mm_struct *mm) { return max(mm->hiwater_vm, mm->total_vm); @@ -484,6 +493,13 @@ struct pacct_struct { unsigned long ac_minflt, ac_majflt; }; +struct cpu_itimer { + cputime_t expires; + cputime_t incr; + u32 error; + u32 incr_error; +}; + /** * struct task_cputime - collected CPU time counts * @utime: time spent in user mode, in &cputime_t units @@ -578,9 +594,12 @@ struct signal_struct { struct pid *leader_pid; ktime_t it_real_incr; - /* ITIMER_PROF and ITIMER_VIRTUAL timers for the process */ - cputime_t it_prof_expires, it_virt_expires; - cputime_t it_prof_incr, it_virt_incr; + /* + * ITIMER_PROF and ITIMER_VIRTUAL timers for the process, we use + * CPUCLOCK_PROF and CPUCLOCK_VIRT for indexing array as these + * values are defined to 0 and 1 respectively + */ + struct cpu_itimer it[2]; /* * Thread group totals for process CPU timers. @@ -612,6 +631,7 @@ struct signal_struct { unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw; unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt; unsigned long inblock, oublock, cinblock, coublock; + unsigned long maxrss, cmaxrss; struct task_io_accounting ioac; /* @@ -1251,7 +1271,6 @@ struct task_struct { struct mm_struct *mm, *active_mm; /* task state */ - struct linux_binfmt *binfmt; int exit_state; int exit_code, exit_signal; int pdeath_signal; /* The signal sent when the parent dies */ @@ -1519,6 +1538,7 @@ struct task_struct { /* bitmask of trace recursion */ unsigned long trace_recursion; #endif /* CONFIG_TRACING */ + unsigned long stack_start; }; /* Future-safe accessor for struct task_struct's cpus_allowed. */ @@ -1714,6 +1734,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ #define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */ +#define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */ #define PF_SUPERPRIV 0x00000100 /* used super-user privileges */ #define PF_DUMPCORE 0x00000200 /* dumped core */ #define PF_SIGNALED 0x00000400 /* killed by a signal */ @@ -1733,6 +1754,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */ #define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */ #define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */ +#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */ #define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */ #define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */ #define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */ @@ -1796,10 +1818,13 @@ static inline int set_cpus_allowed_ptr(struct task_struct *p, return 0; } #endif + +#ifndef CONFIG_CPUMASK_OFFSTACK static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) { return set_cpus_allowed_ptr(p, &new_mask); } +#endif /* * Architectures can set this to 1 if they have specified @@ -1882,7 +1907,7 @@ extern unsigned int sysctl_sched_time_avg; extern unsigned int sysctl_timer_migration; int sched_nr_latency_handler(struct ctl_table *table, int write, - struct file *file, void __user *buffer, size_t *length, + void __user *buffer, size_t *length, loff_t *ppos); #endif #ifdef CONFIG_SCHED_DEBUG @@ -1900,7 +1925,7 @@ extern unsigned int sysctl_sched_rt_period; extern int sysctl_sched_rt_runtime; int sched_rt_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int sysctl_sched_compat_yield; @@ -2035,6 +2060,7 @@ extern int kill_pgrp(struct pid *pid, int sig, int priv); extern int kill_pid(struct pid *pid, int sig, int priv); extern int kill_proc_info(int, struct siginfo *, pid_t); extern int do_notify_parent(struct task_struct *, int); +extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent); extern void force_sig(int, struct task_struct *); extern void force_sig_specific(int, struct task_struct *); extern int send_sig(int, struct task_struct *, int); @@ -2312,7 +2338,10 @@ static inline int signal_pending(struct task_struct *p) return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); } -extern int __fatal_signal_pending(struct task_struct *p); +static inline int __fatal_signal_pending(struct task_struct *p) +{ + return unlikely(sigismember(&p->pending.signal, SIGKILL)); +} static inline int fatal_signal_pending(struct task_struct *p) { diff --git a/include/linux/security.h b/include/linux/security.h index d050b66ab9e..239e40d0450 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -133,7 +133,7 @@ static inline unsigned long round_hint_to_min(unsigned long hint) return PAGE_ALIGN(mmap_min_addr); return hint; } -extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, +extern int mmap_min_addr_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); #ifdef CONFIG_SECURITY diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d58e460844d..fe661afe071 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -477,7 +477,7 @@ static inline int uart_handle_break(struct uart_port *port) /** * uart_handle_dcd_change - handle a change of carrier detect state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active */ static inline void @@ -503,7 +503,7 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status) /** * uart_handle_cts_change - handle a change of clear-to-send state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active */ static inline void diff --git a/include/linux/sfi.h b/include/linux/sfi.h new file mode 100644 index 00000000000..9a6f7607174 --- /dev/null +++ b/include/linux/sfi.h @@ -0,0 +1,206 @@ +/* sfi.h Simple Firmware Interface */ + +/* + + This file is provided under a dual BSD/GPLv2 license. When using or + redistributing this file, you may do so under either license. + + GPL LICENSE SUMMARY + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + The full GNU General Public License is included in this distribution + in the file called LICENSE.GPL. + + BSD LICENSE + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef _LINUX_SFI_H +#define _LINUX_SFI_H + +/* Table signatures reserved by the SFI specification */ +#define SFI_SIG_SYST "SYST" +#define SFI_SIG_FREQ "FREQ" +#define SFI_SIG_IDLE "IDLE" +#define SFI_SIG_CPUS "CPUS" +#define SFI_SIG_MTMR "MTMR" +#define SFI_SIG_MRTC "MRTC" +#define SFI_SIG_MMAP "MMAP" +#define SFI_SIG_APIC "APIC" +#define SFI_SIG_XSDT "XSDT" +#define SFI_SIG_WAKE "WAKE" +#define SFI_SIG_SPIB "SPIB" +#define SFI_SIG_I2CB "I2CB" +#define SFI_SIG_GPEM "GPEM" + +#define SFI_SIGNATURE_SIZE 4 +#define SFI_OEM_ID_SIZE 6 +#define SFI_OEM_TABLE_ID_SIZE 8 + +#define SFI_SYST_SEARCH_BEGIN 0x000E0000 +#define SFI_SYST_SEARCH_END 0x000FFFFF + +#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \ + ((ptable->header.len - sizeof(struct sfi_table_header)) / \ + (sizeof(entry_type))) +/* + * Table structures must be byte-packed to match the SFI specification, + * as they are provided by the BIOS. + */ +struct sfi_table_header { + char sig[SFI_SIGNATURE_SIZE]; + u32 len; + u8 rev; + u8 csum; + char oem_id[SFI_OEM_ID_SIZE]; + char oem_table_id[SFI_OEM_TABLE_ID_SIZE]; +} __packed; + +struct sfi_table_simple { + struct sfi_table_header header; + u64 pentry[1]; +} __packed; + +/* Comply with UEFI spec 2.1 */ +struct sfi_mem_entry { + u32 type; + u64 phys_start; + u64 virt_start; + u64 pages; + u64 attrib; +} __packed; + +struct sfi_cpu_table_entry { + u32 apic_id; +} __packed; + +struct sfi_cstate_table_entry { + u32 hint; /* MWAIT hint */ + u32 latency; /* latency in ms */ +} __packed; + +struct sfi_apic_table_entry { + u64 phys_addr; /* phy base addr for APIC reg */ +} __packed; + +struct sfi_freq_table_entry { + u32 freq_mhz; /* in MHZ */ + u32 latency; /* transition latency in ms */ + u32 ctrl_val; /* value to write to PERF_CTL */ +} __packed; + +struct sfi_wake_table_entry { + u64 phys_addr; /* pointer to where the wake vector locates */ +} __packed; + +struct sfi_timer_table_entry { + u64 phys_addr; /* phy base addr for the timer */ + u32 freq_hz; /* in HZ */ + u32 irq; +} __packed; + +struct sfi_rtc_table_entry { + u64 phys_addr; /* phy base addr for the RTC */ + u32 irq; +} __packed; + +struct sfi_spi_table_entry { + u16 host_num; /* attached to host 0, 1...*/ + u16 cs; /* chip select */ + u16 irq_info; + char name[16]; + u8 dev_info[10]; +} __packed; + +struct sfi_i2c_table_entry { + u16 host_num; + u16 addr; /* slave addr */ + u16 irq_info; + char name[16]; + u8 dev_info[10]; +} __packed; + +struct sfi_gpe_table_entry { + u16 logical_id; /* logical id */ + u16 phys_id; /* physical GPE id */ +} __packed; + + +typedef int (*sfi_table_handler) (struct sfi_table_header *table); + +#ifdef CONFIG_SFI +extern void __init sfi_init(void); +extern int __init sfi_platform_init(void); +extern void __init sfi_init_late(void); +extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id, + sfi_table_handler handler); + +extern int sfi_disabled; +static inline void disable_sfi(void) +{ + sfi_disabled = 1; +} + +#else /* !CONFIG_SFI */ + +static inline void sfi_init(void) +{ +} + +static inline void sfi_init_late(void) +{ +} + +#define sfi_disabled 0 + +static inline int sfi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + sfi_table_handler handler) +{ + return -1; +} + +#endif /* !CONFIG_SFI */ + +#endif /*_LINUX_SFI_H*/ diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h new file mode 100644 index 00000000000..c4a5a8cd446 --- /dev/null +++ b/include/linux/sfi_acpi.h @@ -0,0 +1,93 @@ +/* sfi.h Simple Firmware Interface */ + +/* + + This file is provided under a dual BSD/GPLv2 license. When using or + redistributing this file, you may do so under either license. + + GPL LICENSE SUMMARY + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + The full GNU General Public License is included in this distribution + in the file called LICENSE.GPL. + + BSD LICENSE + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef _LINUX_SFI_ACPI_H +#define _LINUX_SFI_ACPI_H + +#ifdef CONFIG_SFI +#include <acpi/acpi.h> /* struct acpi_table_header */ + +extern int sfi_acpi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + int (*handler)(struct acpi_table_header *)); + +static inline int acpi_sfi_table_parse(char *signature, + int (*handler)(struct acpi_table_header *)) +{ + if (!acpi_table_parse(signature, handler)) + return 0; + + return sfi_acpi_table_parse(signature, NULL, NULL, handler); +} +#else /* !CONFIG_SFI */ + +static inline int sfi_acpi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + int (*handler)(struct acpi_table_header *)) +{ + return -1; +} + +static inline int acpi_sfi_table_parse(char *signature, + int (*handler)(struct acpi_table_header *)) +{ + return acpi_table_parse(signature, handler); +} +#endif /* !CONFIG_SFI */ + +#endif /*_LINUX_SFI_ACPI_H*/ diff --git a/include/linux/signal.h b/include/linux/signal.h index c7552836bd9..ab9272cc270 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -233,6 +233,8 @@ static inline int valid_signal(unsigned long sig) } extern int next_signal(struct sigpending *pending, sigset_t *mask); +extern int do_send_sig_info(int sig, struct siginfo *info, + struct task_struct *p, bool group); extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p); extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *); extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, diff --git a/include/linux/smp.h b/include/linux/smp.h index 9e3d8af0920..39c64bae776 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -73,15 +73,6 @@ int smp_call_function(void(*func)(void *info), void *info, int wait); void smp_call_function_many(const struct cpumask *mask, void (*func)(void *info), void *info, bool wait); -/* Deprecated: Use smp_call_function_many which takes a pointer to the mask. */ -static inline int -smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info, - int wait) -{ - smp_call_function_many(&mask, func, info, wait); - return 0; -} - void __smp_call_function_single(int cpuid, struct call_single_data *data, int wait); @@ -144,8 +135,6 @@ static inline int up_smp_call_function(void (*func)(void *), void *info) static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) -#define smp_call_function_mask(mask, func, info, wait) \ - (up_smp_call_function(func, info)) #define smp_call_function_many(mask, func, info, wait) \ (up_smp_call_function(func, info)) static inline void init_call_single_data(void) diff --git a/include/linux/spi/mc33880.h b/include/linux/spi/mc33880.h new file mode 100644 index 00000000000..82ffccd6fbe --- /dev/null +++ b/include/linux/spi/mc33880.h @@ -0,0 +1,10 @@ +#ifndef LINUX_SPI_MC33880_H +#define LINUX_SPI_MC33880_H + +struct mc33880_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif + diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c47c4b4da97..97b60b37f44 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -20,6 +20,7 @@ #define __LINUX_SPI_H #include <linux/device.h> +#include <linux/mod_devicetable.h> /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -86,7 +87,7 @@ struct spi_device { int irq; void *controller_state; void *controller_data; - char modalias[32]; + char modalias[SPI_NAME_SIZE]; /* * likely need more hooks for more protocol options affecting how @@ -145,6 +146,7 @@ struct spi_message; /** * struct spi_driver - Host side "protocol" driver + * @id_table: List of SPI devices supported by this driver * @probe: Binds this driver to the spi device. Drivers can verify * that the device is actually present, and may need to configure * characteristics (such as bits_per_word) which weren't needed for @@ -170,6 +172,7 @@ struct spi_message; * MMC, RTC, filesystem character device nodes, and hardware monitoring. */ struct spi_driver { + const struct spi_device_id *id_table; int (*probe)(struct spi_device *spi); int (*remove)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi); @@ -207,6 +210,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. + * @mode_bits: flags understood by this controller driver + * @flags: other constraints relevant to this driver * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -253,6 +258,8 @@ struct spi_master { /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ +#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ +#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ /* Setup mode and clock, etc (spi driver may call many times). * @@ -533,42 +540,7 @@ static inline void spi_message_free(struct spi_message *m) } extern int spi_setup(struct spi_device *spi); - -/** - * spi_async - asynchronous SPI transfer - * @spi: device with which data will be exchanged - * @message: describes the data transfers, including completion callback - * Context: any (irqs may be blocked, etc) - * - * This call may be used in_irq and other contexts which can't sleep, - * as well as from task contexts which can sleep. - * - * The completion callback is invoked in a context which can't sleep. - * Before that invocation, the value of message->status is undefined. - * When the callback is issued, message->status holds either zero (to - * indicate complete success) or a negative error code. After that - * callback returns, the driver which issued the transfer request may - * deallocate the associated memory; it's no longer in use by any SPI - * core or controller driver code. - * - * Note that although all messages to a spi_device are handled in - * FIFO order, messages may go to different devices in other orders. - * Some device might be higher priority, or have various "hard" access - * time requirements, for example. - * - * On detection of any fault during the transfer, processing of - * the entire message is aborted, and the device is deselected. - * Until returning from the associated message completion callback, - * no other spi_message queued to that device will be processed. - * (This rule applies equally to all the synchronous transfer calls, - * which are wrappers around this core asynchronous primitive.) - */ -static inline int -spi_async(struct spi_device *spi, struct spi_message *message) -{ - message->spi = spi; - return spi->master->transfer(spi, message); -} +extern int spi_async(struct spi_device *spi, struct spi_message *message); /*---------------------------------------------------------------------------*/ @@ -732,7 +704,7 @@ struct spi_board_info { * controller_data goes to spi_device.controller_data, * irq is copied too */ - char modalias[32]; + char modalias[SPI_NAME_SIZE]; const void *platform_data; void *controller_data; int irq; @@ -800,4 +772,7 @@ spi_unregister_device(struct spi_device *spi) device_unregister(&spi->dev); } +extern const struct spi_device_id * +spi_get_device_id(const struct spi_device *sdev); + #endif /* __LINUX_SPI_H */ diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index 7da466ba4b0..f5cc0898bc5 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -11,6 +11,7 @@ #include <linux/uio.h> #include <asm/byteorder.h> +#include <asm/unaligned.h> #include <linux/scatterlist.h> /* @@ -117,14 +118,14 @@ static inline __be32 *xdr_encode_array(__be32 *p, const void *s, unsigned int le static inline __be32 * xdr_encode_hyper(__be32 *p, __u64 val) { - *(__be64 *)p = cpu_to_be64(val); + put_unaligned_be64(val, p); return p + 2; } static inline __be32 * xdr_decode_hyper(__be32 *p, __u64 *valp) { - *valp = be64_to_cpup((__be64 *)p); + *valp = get_unaligned_be64(p); return p + 2; } diff --git a/include/linux/swap.h b/include/linux/swap.h index 6c990e658f4..4ec90019c1a 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -34,16 +34,38 @@ static inline int current_is_kswapd(void) * the type/offset into the pte as 5/27 as well. */ #define MAX_SWAPFILES_SHIFT 5 -#ifndef CONFIG_MIGRATION -#define MAX_SWAPFILES (1 << MAX_SWAPFILES_SHIFT) + +/* + * Use some of the swap files numbers for other purposes. This + * is a convenient way to hook into the VM to trigger special + * actions on faults. + */ + +/* + * NUMA node memory migration support + */ +#ifdef CONFIG_MIGRATION +#define SWP_MIGRATION_NUM 2 +#define SWP_MIGRATION_READ (MAX_SWAPFILES + SWP_HWPOISON_NUM) +#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + SWP_HWPOISON_NUM + 1) #else -/* Use last two entries for page migration swap entries */ -#define MAX_SWAPFILES ((1 << MAX_SWAPFILES_SHIFT)-2) -#define SWP_MIGRATION_READ MAX_SWAPFILES -#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + 1) +#define SWP_MIGRATION_NUM 0 #endif /* + * Handling of hardware poisoned pages with memory corruption. + */ +#ifdef CONFIG_MEMORY_FAILURE +#define SWP_HWPOISON_NUM 1 +#define SWP_HWPOISON MAX_SWAPFILES +#else +#define SWP_HWPOISON_NUM 0 +#endif + +#define MAX_SWAPFILES \ + ((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM) + +/* * Magic header for a swap area. The first part of the union is * what the swap magic looks like for the old (limited to 128MB) * swap area format, the second part of the union adds - in the @@ -217,6 +239,11 @@ extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order, extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, gfp_t gfp_mask, bool noswap, unsigned int swappiness); +extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap, + unsigned int swappiness, + struct zone *zone, + int nid); extern int __isolate_lru_page(struct page *page, int mode, int file); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; @@ -240,7 +267,7 @@ extern int page_evictable(struct page *page, struct vm_area_struct *vma); extern void scan_mapping_unevictable_pages(struct address_space *); extern unsigned long scan_unevictable_pages; -extern int scan_unevictable_handler(struct ctl_table *, int, struct file *, +extern int scan_unevictable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int scan_unevictable_register_node(struct node *node); extern void scan_unevictable_unregister_node(struct node *node); diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 6ec39ab27b4..cd42e30b7c6 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -131,3 +131,41 @@ static inline int is_write_migration_entry(swp_entry_t entry) #endif +#ifdef CONFIG_MEMORY_FAILURE +/* + * Support for hardware poisoned pages + */ +static inline swp_entry_t make_hwpoison_entry(struct page *page) +{ + BUG_ON(!PageLocked(page)); + return swp_entry(SWP_HWPOISON, page_to_pfn(page)); +} + +static inline int is_hwpoison_entry(swp_entry_t entry) +{ + return swp_type(entry) == SWP_HWPOISON; +} +#else + +static inline swp_entry_t make_hwpoison_entry(struct page *page) +{ + return swp_entry(0, 0); +} + +static inline int is_hwpoison_entry(swp_entry_t swp) +{ + return 0; +} +#endif + +#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) +static inline int non_swap_entry(swp_entry_t entry) +{ + return swp_type(entry) >= MAX_SWAPFILES; +} +#else +static inline int non_swap_entry(swp_entry_t entry) +{ + return 0; +} +#endif diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 8d8285a10db..a990ace1a83 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -460,8 +460,7 @@ asmlinkage long sys_mount(char __user *dev_name, char __user *dir_name, void __user *data); asmlinkage long sys_umount(char __user *name, int flags); asmlinkage long sys_oldumount(char __user *name); -asmlinkage long sys_truncate(const char __user *path, - unsigned long length); +asmlinkage long sys_truncate(const char __user *path, long length); asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length); asmlinkage long sys_stat(char __user *filename, struct __old_kernel_stat __user *statbuf); diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index e76d3b22a46..1e4743ee683 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -29,7 +29,6 @@ #include <linux/types.h> #include <linux/compiler.h> -struct file; struct completion; #define CTL_MAXNAME 10 /* how many path components do we allow in a @@ -977,25 +976,25 @@ typedef int ctl_handler (struct ctl_table *table, void __user *oldval, size_t __user *oldlenp, void __user *newval, size_t newlen); -typedef int proc_handler (struct ctl_table *ctl, int write, struct file * filp, +typedef int proc_handler (struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -extern int proc_dostring(struct ctl_table *, int, struct file *, +extern int proc_dostring(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec(struct ctl_table *, int, struct file *, +extern int proc_dointvec(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_minmax(struct ctl_table *, int, struct file *, +extern int proc_dointvec_minmax(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_doulongvec_minmax(struct ctl_table *, int, struct file *, +extern int proc_doulongvec_minmax(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern int do_sysctl (int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, diff --git a/include/linux/time.h b/include/linux/time.h index 56787c09334..fe04e5ef6a5 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -155,6 +155,34 @@ extern void timekeeping_leap_insert(int leapsecond); struct tms; extern void do_sys_times(struct tms *); +/* + * Similar to the struct tm in userspace <time.h>, but it needs to be here so + * that the kernel source is self contained. + */ +struct tm { + /* + * the number of seconds after the minute, normally in the range + * 0 to 59, but can be up to 60 to allow for leap seconds + */ + int tm_sec; + /* the number of minutes after the hour, in the range 0 to 59*/ + int tm_min; + /* the number of hours past midnight, in the range 0 to 23 */ + int tm_hour; + /* the day of the month, in the range 1 to 31 */ + int tm_mday; + /* the number of months since January, in the range 0 to 11 */ + int tm_mon; + /* the number of years since 1900 */ + long tm_year; + /* the number of days since Sunday, in the range 0 to 6 */ + int tm_wday; + /* the number of days since January 1, in the range 0 to 365 */ + int tm_yday; +}; + +void time_to_tm(time_t totalsecs, int offset, struct tm *result); + /** * timespec_to_ns - Convert timespec to nanoseconds * @ts: pointer to the timespec variable to be converted diff --git a/include/linux/topology.h b/include/linux/topology.h index 809b26c0709..fc0bf3edeb6 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -211,12 +211,6 @@ int arch_update_cpu_topology(void); #ifndef topology_core_id #define topology_core_id(cpu) ((void)(cpu), 0) #endif -#ifndef topology_thread_siblings -#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu) -#endif -#ifndef topology_core_siblings -#define topology_core_siblings(cpu) cpumask_of_cpu(cpu) -#endif #ifndef topology_thread_cpumask #define topology_thread_cpumask(cpu) cpumask_of(cpu) #endif diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 17ba82efa48..1eb44a924e5 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -1,7 +1,7 @@ /* * Tracing hooks * - * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved. * * This copyrighted material is made available to anyone wishing to use, * modify, copy, or redistribute it subject to the terms and conditions @@ -463,22 +463,38 @@ static inline int tracehook_get_signal(struct task_struct *task, /** * tracehook_notify_jctl - report about job control stop/continue - * @notify: nonzero if this is the last thread in the group to stop + * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED * @why: %CLD_STOPPED or %CLD_CONTINUED * * This is called when we might call do_notify_parent_cldstop(). - * It's called when about to stop for job control; we are already in - * %TASK_STOPPED state, about to call schedule(). It's also called when - * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made. * - * Return nonzero to generate a %SIGCHLD with @why, which is - * normal if @notify is nonzero. + * @notify is zero if we would not ordinarily send a %SIGCHLD, + * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD. * - * Called with no locks held. + * @why is %CLD_STOPPED when about to stop for job control; + * we are already in %TASK_STOPPED state, about to call schedule(). + * It might also be that we have just exited (check %PF_EXITING), + * but need to report that a group-wide stop is complete. + * + * @why is %CLD_CONTINUED when waking up after job control stop and + * ready to make a delayed @notify report. + * + * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal. + * + * Called with the siglock held. */ static inline int tracehook_notify_jctl(int notify, int why) { - return notify || (current->ptrace & PT_PTRACED); + return notify ?: (current->ptrace & PT_PTRACED) ? why : 0; +} + +/** + * tracehook_finish_jctl - report about return from job control stop + * + * This is called by do_signal_stop() after wakeup. + */ +static inline void tracehook_finish_jctl(void) +{ } #define DEATH_REAP -1 diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 63a3f7a8058..660a9de96f8 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/tracepoint.txt. + * See Documentation/trace/tracepoints.txt. * * (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> * diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index ae779bb8cc0..adb44066680 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -26,6 +26,7 @@ #include <sound/ac97_codec.h> #include <linux/mutex.h> #include <linux/platform_device.h> +#include <linux/gpio.h> /* * UCB1400 AC-link registers @@ -82,6 +83,17 @@ #define UCB_ID 0x7e #define UCB_ID_1400 0x4304 +struct ucb1400_gpio_data { + int gpio_offset; + int (*gpio_setup)(struct device *dev, int ngpio); + int (*gpio_teardown)(struct device *dev, int ngpio); +}; + +struct ucb1400_gpio { + struct gpio_chip gc; + struct snd_ac97 *ac97; +}; + struct ucb1400_ts { struct input_dev *ts_idev; struct task_struct *ts_task; @@ -95,6 +107,7 @@ struct ucb1400_ts { struct ucb1400 { struct platform_device *ucb1400_ts; + struct platform_device *ucb1400_gpio; }; static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg) @@ -147,4 +160,10 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97) unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel, int adcsync); +#ifdef CONFIG_GPIO_UCB1400 +void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data); +#else +static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {} +#endif + #endif diff --git a/include/linux/unaligned/be_byteshift.h b/include/linux/unaligned/be_byteshift.h index 46dd12c5709..9356b24223a 100644 --- a/include/linux/unaligned/be_byteshift.h +++ b/include/linux/unaligned/be_byteshift.h @@ -1,7 +1,7 @@ #ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H #define _LINUX_UNALIGNED_BE_BYTESHIFT_H -#include <linux/kernel.h> +#include <linux/types.h> static inline u16 __get_unaligned_be16(const u8 *p) { diff --git a/include/linux/unaligned/le_byteshift.h b/include/linux/unaligned/le_byteshift.h index 59777e951ba..be376fb79b6 100644 --- a/include/linux/unaligned/le_byteshift.h +++ b/include/linux/unaligned/le_byteshift.h @@ -1,7 +1,7 @@ #ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H #define _LINUX_UNALIGNED_LE_BYTESHIFT_H -#include <linux/kernel.h> +#include <linux/types.h> static inline u16 __get_unaligned_le16(const u8 *p) { diff --git a/include/linux/usb.h b/include/linux/usb.h index 19fabc487be..a34fa89f147 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -195,7 +195,7 @@ struct usb_interface { struct device dev; /* interface specific device info */ struct device *usb_dev; - int pm_usage_cnt; /* usage counter for autosuspend */ + atomic_t pm_usage_cnt; /* usage counter for autosuspend */ struct work_struct reset_ws; /* for resets in atomic context */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) @@ -551,13 +551,13 @@ extern void usb_autopm_put_interface_async(struct usb_interface *intf); static inline void usb_autopm_enable(struct usb_interface *intf) { - intf->pm_usage_cnt = 0; + atomic_set(&intf->pm_usage_cnt, 0); usb_autopm_set_interface(intf); } static inline void usb_autopm_disable(struct usb_interface *intf) { - intf->pm_usage_cnt = 1; + atomic_set(&intf->pm_usage_cnt, 1); usb_autopm_set_interface(intf); } @@ -1036,9 +1036,10 @@ typedef void (*usb_complete_t)(struct urb *); * @transfer_flags: A variety of flags may be used to affect how URB * submission, unlinking, or operation are handled. Different * kinds of URB can use different flags. - * @transfer_buffer: This identifies the buffer to (or from) which - * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP - * is set). This buffer must be suitable for DMA; allocate it with + * @transfer_buffer: This identifies the buffer to (or from) which the I/O + * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set + * (however, do not leave garbage in transfer_buffer even then). + * This buffer must be suitable for DMA; allocate it with * kmalloc() or equivalent. For transfers to "in" endpoints, contents * of this buffer will be modified. This buffer is used for the data * stage of control transfers. @@ -1104,9 +1105,15 @@ typedef void (*usb_complete_t)(struct urb *); * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map(). * When these transfer flags are provided, host controller drivers will * attempt to use the dma addresses found in the transfer_dma and/or - * setup_dma fields rather than determining a dma address themselves. (Note - * that transfer_buffer and setup_packet must still be set because not all - * host controllers use DMA, nor do virtual root hubs). + * setup_dma fields rather than determining a dma address themselves. + * + * Note that transfer_buffer must still be set if the controller + * does not support DMA (as indicated by bus.uses_dma) and when talking + * to root hub. If you have to trasfer between highmem zone and the device + * on such controller, create a bounce buffer or bail out with an error. + * If transfer_buffer cannot be set (is in highmem) and the controller is DMA + * capable, assign NULL to it, so that usbmon knows not to use the value. + * The setup_packet must always be set, so it cannot be located in highmem. * * Initialization: * diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index b5744bc218a..eaf9dffe0a0 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -24,88 +24,78 @@ #define USB_SUBCLASS_AUDIOCONTROL 0x01 #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/ -#define HEADER 0x01 -#define INPUT_TERMINAL 0x02 -#define OUTPUT_TERMINAL 0x03 -#define MIXER_UNIT 0x04 -#define SELECTOR_UNIT 0x05 -#define FEATURE_UNIT 0x06 -#define PROCESSING_UNIT 0x07 -#define EXTENSION_UNIT 0x08 - -#define AS_GENERAL 0x01 -#define FORMAT_TYPE 0x02 -#define FORMAT_SPECIFIC 0x03 - -#define EP_GENERAL 0x01 - -#define MS_GENERAL 0x01 -#define MIDI_IN_JACK 0x02 -#define MIDI_OUT_JACK 0x03 - -/* endpoint attributes */ -#define EP_ATTR_MASK 0x0c -#define EP_ATTR_ASYNC 0x04 -#define EP_ATTR_ADAPTIVE 0x08 -#define EP_ATTR_SYNC 0x0c - -/* cs endpoint attributes */ -#define EP_CS_ATTR_SAMPLE_RATE 0x01 -#define EP_CS_ATTR_PITCH_CONTROL 0x02 -#define EP_CS_ATTR_FILL_MAX 0x80 - -/* Audio Class specific Request Codes */ -#define USB_AUDIO_SET_INTF 0x21 -#define USB_AUDIO_SET_ENDPOINT 0x22 -#define USB_AUDIO_GET_INTF 0xa1 -#define USB_AUDIO_GET_ENDPOINT 0xa2 - -#define SET_ 0x00 -#define GET_ 0x80 - -#define _CUR 0x1 -#define _MIN 0x2 -#define _MAX 0x3 -#define _RES 0x4 -#define _MEM 0x5 - -#define SET_CUR (SET_ | _CUR) -#define GET_CUR (GET_ | _CUR) -#define SET_MIN (SET_ | _MIN) -#define GET_MIN (GET_ | _MIN) -#define SET_MAX (SET_ | _MAX) -#define GET_MAX (GET_ | _MAX) -#define SET_RES (SET_ | _RES) -#define GET_RES (GET_ | _RES) -#define SET_MEM (SET_ | _MEM) -#define GET_MEM (GET_ | _MEM) - -#define GET_STAT 0xff - -#define USB_AC_TERMINAL_UNDEFINED 0x100 -#define USB_AC_TERMINAL_STREAMING 0x101 -#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF + +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC_PROCESSING_UNIT 0x07 +#define UAC_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF /* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ -struct usb_ac_header_descriptor { +struct uac_ac_header_descriptor { __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_HEADER */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ __le16 bcdADC; /* 0x0100 */ __le16 wTotalLength; /* includes Unit and Terminal desc. */ __u8 bInCollection; /* n */ __u8 baInterfaceNr[]; /* [n] */ } __attribute__ ((packed)); -#define USB_DT_AC_HEADER_SIZE(n) (8 + (n)) +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) /* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \ -struct usb_ac_header_descriptor_##n { \ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac_ac_header_descriptor_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -116,7 +106,7 @@ struct usb_ac_header_descriptor_##n { \ } __attribute__ ((packed)) /* 4.3.2.1 Input Terminal Descriptor */ -struct usb_input_terminal_descriptor { +struct uac_input_terminal_descriptor { __u8 bLength; /* in bytes: 12 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ @@ -129,18 +119,19 @@ struct usb_input_terminal_descriptor { __u8 iTerminal; } __attribute__ ((packed)); -#define USB_DT_AC_INPUT_TERMINAL_SIZE 12 +#define UAC_DT_INPUT_TERMINAL_SIZE 12 -#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200 -#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201 -#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 /* 4.3.2.2 Output Terminal Descriptor */ -struct usb_output_terminal_descriptor { +struct uac_output_terminal_descriptor { __u8 bLength; /* in bytes: 9 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ @@ -151,23 +142,24 @@ struct usb_output_terminal_descriptor { __u8 iTerminal; } __attribute__ ((packed)); -#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9 +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 -#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 /* Set bControlSize = 2 as default setting */ -#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) /* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct usb_ac_feature_unit_descriptor_##ch { \ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -179,7 +171,7 @@ struct usb_ac_feature_unit_descriptor_##ch { \ } __attribute__ ((packed)) /* 4.5.2 Class-Specific AS Interface Descriptor */ -struct usb_as_header_descriptor { +struct uac_as_header_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* AS_GENERAL */ @@ -188,16 +180,17 @@ struct usb_as_header_descriptor { __le16 wFormatTag; /* The Audio Data Format */ } __attribute__ ((packed)); -#define USB_DT_AS_HEADER_SIZE 7 +#define UAC_DT_AS_HEADER_SIZE 7 -#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0 -#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1 -#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2 -#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4 -#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5 +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 -struct usb_as_format_type_i_continuous_descriptor { +struct uac_format_type_i_continuous_descriptor { __u8 bLength; /* in bytes: 8 + (ns * 3) */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* FORMAT_TYPE */ @@ -210,9 +203,9 @@ struct usb_as_format_type_i_continuous_descriptor { __u8 tUpperSamFreq[3]; } __attribute__ ((packed)); -#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 -struct usb_as_formate_type_i_discrete_descriptor { +struct uac_format_type_i_discrete_descriptor { __u8 bLength; /* in bytes: 8 + (ns * 3) */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* FORMAT_TYPE */ @@ -224,8 +217,8 @@ struct usb_as_formate_type_i_discrete_descriptor { __u8 tSamFreq[][3]; } __attribute__ ((packed)); -#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct usb_as_formate_type_i_discrete_descriptor_##n { \ +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -237,18 +230,15 @@ struct usb_as_formate_type_i_discrete_descriptor_##n { \ __u8 tSamFreq[n][3]; \ } __attribute__ ((packed)) -#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0 -#define USB_AS_FORMAT_TYPE_I 0x1 -#define USB_AS_FORMAT_TYPE_II 0x2 -#define USB_AS_FORMAT_TYPE_III 0x3 +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) -#define USB_AS_ENDPOINT_ASYNC (1 << 2) -#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2) -#define USB_AS_ENDPOINT_SYNC (3 << 2) +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 -struct usb_as_iso_endpoint_descriptor { +struct uac_iso_endpoint_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ __u8 bDescriptorSubtype; /* EP_GENERAL */ @@ -256,30 +246,37 @@ struct usb_as_iso_endpoint_descriptor { __u8 bLockDelayUnits; __le16 wLockDelay; }; -#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7 - -#define FU_CONTROL_UNDEFINED 0x00 -#define MUTE_CONTROL 0x01 -#define VOLUME_CONTROL 0x02 -#define BASS_CONTROL 0x03 -#define MID_CONTROL 0x04 -#define TREBLE_CONTROL 0x05 -#define GRAPHIC_EQUALIZER_CONTROL 0x06 -#define AUTOMATIC_GAIN_CONTROL 0x07 -#define DELAY_CONTROL 0x08 -#define BASS_BOOST_CONTROL 0x09 -#define LOUDNESS_CONTROL 0x0a - -#define FU_MUTE (1 << (MUTE_CONTROL - 1)) -#define FU_VOLUME (1 << (VOLUME_CONTROL - 1)) -#define FU_BASS (1 << (BASS_CONTROL - 1)) -#define FU_MID (1 << (MID_CONTROL - 1)) -#define FU_TREBLE (1 << (TREBLE_CONTROL - 1)) -#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1)) -#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1)) -#define FU_DELAY (1 << (DELAY_CONTROL - 1)) -#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1)) -#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1)) +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_CONTROL_UNDEFINED 0x00 +#define UAC_MUTE_CONTROL 0x01 +#define UAC_VOLUME_CONTROL 0x02 +#define UAC_BASS_CONTROL 0x03 +#define UAC_MID_CONTROL 0x04 +#define UAC_TREBLE_CONTROL 0x05 +#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06 +#define UAC_AUTOMATIC_GAIN_CONTROL 0x07 +#define UAC_DELAY_CONTROL 0x08 +#define UAC_BASS_BOOST_CONTROL 0x09 +#define UAC_LOUDNESS_CONTROL 0x0a + +#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1)) +#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1)) +#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1)) +#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1)) +#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1)) +#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1)) +#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1)) +#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1)) +#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1)) +#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1)) + +#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -290,18 +287,6 @@ struct usb_audio_control { int (*get)(struct usb_audio_control *con, u8 cmd); }; -static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) -{ - con->data[cmd] = value; - - return 0; -} - -static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd) -{ - return con->data[cmd]; -} - struct usb_audio_control_selector { struct list_head list; struct list_head control; @@ -311,4 +296,6 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; +#endif /* __KERNEL__ */ + #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 93223638f70..94012e649d8 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -258,6 +258,8 @@ struct usb_device_descriptor { #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff +#define USB_SUBCLASS_VENDOR_SPEC 0xff + /*-------------------------------------------------------------------------*/ /* USB_DT_CONFIG: Configuration descriptor information. @@ -348,6 +350,12 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 5b88e36c910..af4b86f3aca 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -105,6 +105,7 @@ struct ehci_regs { #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ /* 19:16 for port testing */ +#define PORT_TEST_PKT (0x4<<16) /* Port Test Control - packet test */ #define PORT_LED_OFF (0<<14) #define PORT_LED_AMBER (1<<14) #define PORT_LED_GREEN (2<<14) @@ -132,6 +133,19 @@ struct ehci_regs { #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ +/* Moorestown has some non-standard registers, partially due to the fact that + * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to + * PORTSCx + */ +#define HOSTPC0 0x84 /* HOSTPC extension */ +#define HOSTPC_PHCD (1<<22) /* Phy clock disable */ +#define HOSTPC_PSPD (3<<25) /* Port speed detection */ +#define USBMODE_EX 0xc8 /* USB Device mode extension */ +#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ +#define USBMODE_EX_HC (3<<0) /* host controller mode */ +#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */ +#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) */ @@ -157,4 +171,25 @@ struct ehci_dbg_port { #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) } __attribute__ ((packed)); +#ifdef CONFIG_EARLY_PRINTK_DBGP +#include <linux/init.h> +extern int __init early_dbgp_init(char *s); +extern struct console early_dbgp_console; +#endif /* CONFIG_EARLY_PRINTK_DBGP */ + +#ifdef CONFIG_EARLY_PRINTK_DBGP +/* Call backs from ehci host driver to ehci debug driver */ +extern int dbgp_external_startup(void); +extern int dbgp_reset_prep(void); +#else +static inline int dbgp_reset_prep(void) +{ + return 1; +} +static inline int dbgp_external_startup(void) +{ + return -1; +} +#endif + #endif /* __LINUX_USB_EHCI_DEF_H */ diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h new file mode 100644 index 00000000000..642684bb929 --- /dev/null +++ b/include/linux/usb/isp1362.h @@ -0,0 +1,46 @@ +/* + * board initialization code should put one of these into dev->platform_data + * and place the isp1362 onto platform_bus. + */ + +#ifndef __LINUX_USB_ISP1362_H__ +#define __LINUX_USB_ISP1362_H__ + +struct isp1362_platform_data { + /* Enable internal pulldown resistors on downstream ports */ + unsigned sel15Kres:1; + /* Clock cannot be stopped */ + unsigned clknotstop:1; + /* On-chip overcurrent protection */ + unsigned oc_enable:1; + /* INT output polarity */ + unsigned int_act_high:1; + /* INT edge or level triggered */ + unsigned int_edge_triggered:1; + /* DREQ output polarity */ + unsigned dreq_act_high:1; + /* DACK input polarity */ + unsigned dack_act_high:1; + /* chip can be resumed via H_WAKEUP pin */ + unsigned remote_wakeup_connected:1; + /* Switch or not to switch (keep always powered) */ + unsigned no_power_switching:1; + /* Ganged port power switching (0) or individual port power switching (1) */ + unsigned power_switching_mode:1; + /* Given port_power, msec/2 after power on till power good */ + u8 potpg; + /* Hardware reset set/clear */ + void (*reset) (struct device *dev, int set); + /* Clock start/stop */ + void (*clock) (struct device *dev, int start); + /* Inter-io delay (ns). The chip is picky about access timings; it + * expects at least: + * 110ns delay between consecutive accesses to DATA_REG, + * 300ns delay between access to ADDR_REG and DATA_REG (registers) + * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory) + * WE MUST NOT be activated during these intervals (even without CS!) + */ + void (*delay) (struct device *dev, unsigned int delay); +}; + +#endif diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h new file mode 100644 index 00000000000..de7de53c553 --- /dev/null +++ b/include/linux/usb/isp1760.h @@ -0,0 +1,18 @@ +/* + * board initialization should put one of these into dev->platform_data + * and place the isp1760 onto platform_bus named "isp1760-hcd". + */ + +#ifndef __LINUX_USB_ISP1760_H +#define __LINUX_USB_ISP1760_H + +struct isp1760_platform_data { + unsigned is_isp1761:1; /* Chip is ISP1761 */ + unsigned bus_width_16:1; /* 16/32-bit data bus width */ + unsigned port1_otg:1; /* Port 1 supports OTG */ + unsigned analog_oc:1; /* Analog overcurrent */ + unsigned dack_polarity_high:1; /* DACK active high */ + unsigned dreq_polarity_high:1; /* DREQ active high */ +}; + +#endif /* __LINUX_USB_ISP1760_H */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 7b85e327af9..c17eb64d721 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -59,6 +59,7 @@ enum port_dev_state { * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_fifo: kfifo used to buffer outgoing data * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. @@ -96,6 +97,7 @@ struct usb_serial_port { unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; + struct kfifo *write_fifo; int write_urb_busy; __u8 bulk_out_endpointAddress; diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 0044d9b4cb8..b2a7d8ba6ee 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -77,6 +77,7 @@ struct usbdevfs_connectinfo { #define USBDEVFS_URB_SHORT_NOT_OK 0x01 #define USBDEVFS_URB_ISO_ASAP 0x02 +#define USBDEVFS_URB_BULK_CONTINUATION 0x04 #define USBDEVFS_URB_NO_FSBR 0x20 #define USBDEVFS_URB_ZERO_PACKET 0x40 #define USBDEVFS_URB_NO_INTERRUPT 0x80 @@ -175,4 +176,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) #define USBDEVFS_DISCONNECT _IO('U', 22) #define USBDEVFS_CONNECT _IO('U', 23) +#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) +#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/utsname.h b/include/linux/utsname.h index 3656b300de3..69f39974c04 100644 --- a/include/linux/utsname.h +++ b/include/linux/utsname.h @@ -36,7 +36,6 @@ struct new_utsname { #include <linux/kref.h> #include <linux/nsproxy.h> #include <linux/err.h> -#include <asm/atomic.h> struct uts_namespace { struct kref kref; diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index e81c64af80c..923f9040ea2 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -41,7 +41,7 @@ * interrupts at any time. */ extern void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes); + unsigned int decodes); /** * vga_get - acquire & locks VGA resources @@ -193,8 +193,17 @@ static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2) * They driver will get a callback when VGA arbitration is first used * by userspace since we some older X servers have issues. */ +#if defined(CONFIG_VGA_ARB) int vga_client_register(struct pci_dev *pdev, void *cookie, void (*irq_set_state)(void *cookie, bool state), unsigned int (*set_vga_decode)(void *cookie, bool state)); +#else +static inline int vga_client_register(struct pci_dev *pdev, void *cookie, + void (*irq_set_state)(void *cookie, bool state), + unsigned int (*set_vga_decode)(void *cookie, bool state)) +{ + return 0; +} +#endif #endif /* LINUX_VGA_H */ diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 4fca4f5440b..057a2e01075 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -34,7 +34,7 @@ struct virtqueue { * out_num: the number of sg readable by other side * in_num: the number of sg which are writable (after readable ones) * data: the token identifying the buffer. - * Returns 0 or an error. + * Returns remaining capacity of queue (sg segments) or a negative error. * @kick: update after add_buf * vq: the struct virtqueue * After one or more add_buf calls, invoke this to kick the other side. diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index b3c4a60ceeb..ea7226a45ac 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -4,8 +4,6 @@ * compatible drivers/servers. */ #include <linux/virtio_config.h> -/* The ID for virtio console */ -#define VIRTIO_ID_9P 9 /* Maximum number of virtio channels per partition (1 for now) */ #define MAX_9P_CHAN 1 diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index 8726ff77763..09d73008506 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -4,9 +4,6 @@ * compatible drivers/servers. */ #include <linux/virtio_config.h> -/* The ID for virtio_balloon */ -#define VIRTIO_ID_BALLOON 5 - /* The feature bitmap for virtio balloon */ #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 8dab9f2b883..15cb666581d 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -5,9 +5,6 @@ #include <linux/types.h> #include <linux/virtio_config.h> -/* The ID for virtio_block */ -#define VIRTIO_ID_BLOCK 2 - /* Feature bits */ #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ @@ -17,6 +14,7 @@ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ #define VIRTIO_BLK_F_IDENTIFY 8 /* ATA IDENTIFY supported */ +#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ #define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */ @@ -38,6 +36,17 @@ struct virtio_blk_config { __u8 identify[VIRTIO_BLK_ID_BYTES]; } __attribute__((packed)); +/* + * Command types + * + * Usage is a bit tricky as some bits are used as flags and some are not. + * + * Rules: + * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or + * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own + * and may not be combined with any of the other flags. + */ + /* These two define direction. */ #define VIRTIO_BLK_T_IN 0 #define VIRTIO_BLK_T_OUT 1 @@ -45,6 +54,9 @@ struct virtio_blk_config { /* This bit says it's a scsi command, not an actual read or write. */ #define VIRTIO_BLK_T_SCSI_CMD 2 +/* Cache flush command */ +#define VIRTIO_BLK_T_FLUSH 4 + /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index e547e3c8ee9..0093dd7c1d6 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -109,8 +109,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, unsigned int fbit) { /* Did you forget to fix assumptions on max features? */ - if (__builtin_constant_p(fbit)) - BUILD_BUG_ON(fbit >= 32); + MAYBE_BUILD_BUG_ON(fbit >= 32); if (fbit < VIRTIO_TRANSPORT_F_START) virtio_check_driver_offered_feature(vdev, fbit); diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index dc161115ae3..b5f51980601 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -5,9 +5,6 @@ /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ -/* The ID for virtio console */ -#define VIRTIO_ID_CONSOLE 3 - /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h new file mode 100644 index 00000000000..06660c0a78d --- /dev/null +++ b/include/linux/virtio_ids.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_VIRTIO_IDS_H +#define _LINUX_VIRTIO_IDS_H +/* + * Virtio IDs + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + */ + +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio ring */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ + +#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index d8dd539c9f4..1f41734bbb7 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -6,9 +6,6 @@ #include <linux/virtio_config.h> #include <linux/if_ether.h> -/* The ID for virtio_net */ -#define VIRTIO_ID_NET 1 - /* The feature bitmap for virtio net */ #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h index 1a85dab8a94..48121c3c434 100644 --- a/include/linux/virtio_rng.h +++ b/include/linux/virtio_rng.h @@ -4,7 +4,4 @@ * compatible drivers/servers. */ #include <linux/virtio_config.h> -/* The ID for virtio_rng */ -#define VIRTIO_ID_RNG 4 - #endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 0c9878123d5..38e8c4d9289 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -293,6 +293,24 @@ struct wm97xx { u16 suspend_mode; /* PRP in suspend mode */ }; +struct wm97xx_batt_pdata { + int batt_aux; + int temp_aux; + int charge_gpio; + int min_voltage; + int max_voltage; + int batt_div; + int batt_mult; + int temp_div; + int temp_mult; + int batt_tech; + char *batt_name; +}; + +struct wm97xx_pdata { + struct wm97xx_batt_pdata *batt_pdata; /* battery data */ +}; + /* * Codec GPIO access (not supported on WM9705) * This can be used to set/get codec GPIO and Virtual GPIO status. diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h index 9681d1ab0e4..a1d6419c2ff 100644 --- a/include/linux/wm97xx_batt.h +++ b/include/linux/wm97xx_batt.h @@ -3,22 +3,12 @@ #include <linux/wm97xx.h> -struct wm97xx_batt_info { - int batt_aux; - int temp_aux; - int charge_gpio; - int min_voltage; - int max_voltage; - int batt_div; - int batt_mult; - int temp_div; - int temp_mult; - int batt_tech; - char *batt_name; -}; +#warning This file will be removed soon, use wm97xx.h instead! + +#define wm97xx_batt_info wm97xx_batt_pdata #ifdef CONFIG_BATTERY_WM97XX -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); #else static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {} #endif diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 75cf58666ff..66ebddcff66 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -110,21 +110,20 @@ extern int laptop_mode; extern unsigned long determine_dirtyable_memory(void); extern int dirty_background_ratio_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_background_bytes_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_ratio_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_bytes_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); struct ctl_table; -struct file; -int dirty_writeback_centisecs_handler(struct ctl_table *, int, struct file *, +int dirty_writeback_centisecs_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); void get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty, |