diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/i2c-algo-bit.h | 5 | ||||
| -rw-r--r-- | include/linux/i2c-algo-ite.h | 72 | ||||
| -rw-r--r-- | include/linux/i2c-algo-pca.h | 1 | ||||
| -rw-r--r-- | include/linux/i2c-algo-pcf.h | 3 | ||||
| -rw-r--r-- | include/linux/i2c-algo-sgi.h | 1 | ||||
| -rw-r--r-- | include/linux/i2c-id.h | 17 | ||||
| -rw-r--r-- | include/linux/i2c-pnx.h | 43 | ||||
| -rw-r--r-- | include/linux/i2c.h | 75 |
8 files changed, 90 insertions, 127 deletions
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index c8f8df25c7e..937da70cb4c 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -26,9 +26,9 @@ /* --- Defines for bit-adapters --------------------------------------- */ /* - * This struct contains the hw-dependent functions of bit-style adapters to + * This struct contains the hw-dependent functions of bit-style adapters to * manipulate the line states, and to init any hw-specific features. This is - * only used if you have more than one hw-type of adapter running. + * only used if you have more than one hw-type of adapter running. */ struct i2c_algo_bit_data { void *data; /* private data for lowlevel routines */ @@ -44,6 +44,5 @@ struct i2c_algo_bit_data { }; int i2c_bit_add_bus(struct i2c_adapter *); -int i2c_bit_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h deleted file mode 100644 index 0073fe96c76..00000000000 --- a/include/linux/i2c-algo-ite.h +++ /dev/null @@ -1,72 +0,0 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-97 Simon G. Vogl - 1998-99 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even - Frodo Looijaard <frodol@dds.nl> */ - -/* Modifications by MontaVista Software, 2001 - Changes made to support the ITE IIC peripheral */ - - -#ifndef I2C_ALGO_ITE_H -#define I2C_ALGO_ITE_H 1 - -#include <linux/types.h> - -/* Example of a sequential read request: - struct i2c_iic_msg s_msg; - - s_msg.addr=device_address; - s_msg.len=length; - s_msg.buf=buffer; - s_msg.waddr=word_address; - ioctl(file,I2C_SREAD, &s_msg); - */ -#define I2C_SREAD 0x780 /* SREAD ioctl command */ - -struct i2c_iic_msg { - __u16 addr; /* device address */ - __u16 waddr; /* word address */ - short len; /* msg length */ - char *buf; /* pointer to msg data */ -}; - -#ifdef __KERNEL__ -struct i2c_adapter; - -struct i2c_algo_iic_data { - void *data; /* private data for lolevel routines */ - void (*setiic) (void *data, int ctl, int val); - int (*getiic) (void *data, int ctl); - int (*getown) (void *data); - int (*getclock) (void *data); - void (*waitforpin) (void); - - /* local settings */ - int udelay; - int mdelay; - int timeout; -}; - -int i2c_iic_add_bus(struct i2c_adapter *); -int i2c_iic_del_bus(struct i2c_adapter *); -#endif /* __KERNEL__ */ -#endif /* I2C_ALGO_ITE_H */ diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 226693e0d88..fce47c051bb 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -10,6 +10,5 @@ struct i2c_algo_pca_data { }; int i2c_pca_add_bus(struct i2c_adapter *); -int i2c_pca_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCA_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 9908f3fc483..994eb86f882 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -31,7 +31,7 @@ struct i2c_algo_pcf_data { int (*getpcf) (void *data, int ctl); int (*getown) (void *data); int (*getclock) (void *data); - void (*waitforpin) (void); + void (*waitforpin) (void); /* local settings */ int udelay; @@ -39,6 +39,5 @@ struct i2c_algo_pcf_data { }; int i2c_pcf_add_bus(struct i2c_adapter *); -int i2c_pcf_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCF_H */ diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h index 4a0113d6406..3b7715024e6 100644 --- a/include/linux/i2c-algo-sgi.h +++ b/include/linux/i2c-algo-sgi.h @@ -22,6 +22,5 @@ struct i2c_algo_sgi_data { }; int i2c_sgi_add_bus(struct i2c_adapter *); -int i2c_sgi_del_bus(struct i2c_adapter *); #endif /* I2C_ALGO_SGI_H */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 0f4cf34b6fa..7ae3c332664 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c-id.h - identifier values for i2c drivers and adapters */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -40,10 +40,10 @@ #define I2C_DRIVERID_SAA7120 11 /* video encoder */ #define I2C_DRIVERID_SAA7121 12 /* video encoder */ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ -#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ +#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ #define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */ #define I2C_DRIVERID_PCF8582C 16 /* eeprom */ -#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ +#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ #define I2C_DRIVERID_TEA6300 18 /* audio mixer */ #define I2C_DRIVERID_BT829 19 /* pc to tv encoder */ #define I2C_DRIVERID_TDA9850 20 /* audio mixer */ @@ -82,9 +82,8 @@ #define I2C_DRIVERID_STM41T00 52 /* real time clock */ #define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */ #define I2C_DRIVERID_ADV7170 54 /* video encoder */ -#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */ #define I2C_DRIVERID_MAX1617 56 /* temp sensor */ -#define I2C_DRIVERID_SAA7191 57 /* video encoder */ +#define I2C_DRIVERID_SAA7191 57 /* video decoder */ #define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */ #define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */ #define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */ @@ -132,7 +131,6 @@ #define I2C_DRIVERID_ADM1021 1008 #define I2C_DRIVERID_ADM9240 1009 #define I2C_DRIVERID_LTC1710 1010 -#define I2C_DRIVERID_ICSPLL 1012 #define I2C_DRIVERID_BT869 1013 #define I2C_DRIVERID_MAXILIFE 1014 #define I2C_DRIVERID_MATORB 1015 @@ -165,7 +163,7 @@ * ---- Adapter types ---------------------------------------------------- */ -/* --- Bit algorithm adapters */ +/* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_SER 0x010002 /* Serial line interface */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ @@ -213,9 +211,6 @@ /* --- MPC8xx PowerPC adapters */ #define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ -/* --- ITE based algorithms */ -#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */ - /* --- PowerPC on-chip adapters */ #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h new file mode 100644 index 00000000000..e6e9c814da6 --- /dev/null +++ b/include/linux/i2c-pnx.h @@ -0,0 +1,43 @@ +/* + * Header file for I2C support on PNX010x/4008. + * + * Author: Dennis Kovalev <dkovalev@ru.mvista.com> + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __I2C_PNX_H__ +#define __I2C_PNX_H__ + +#include <asm/arch/i2c.h> + +struct i2c_pnx_mif { + int ret; /* Return value */ + int mode; /* Interface mode */ + struct completion complete; /* I/O completion */ + struct timer_list timer; /* Timeout */ + char * buf; /* Data buffer */ + int len; /* Length of data buffer */ +}; + +struct i2c_pnx_algo_data { + u32 base; + u32 ioaddr; + int irq; + struct i2c_pnx_mif mif; + int last; +}; + +struct i2c_pnx_data { + int (*suspend) (struct platform_device *pdev, pm_message_t state); + int (*resume) (struct platform_device *pdev); + u32 (*calculate_input_freq) (struct platform_device *pdev); + int (*set_clock_run) (struct platform_device *pdev); + int (*set_clock_stop) (struct platform_device *pdev); + struct i2c_adapter *adapter; +}; + +#endif /* __I2C_PNX_H__ */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9b5d04768c2..71e50d3e492 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c.h - definitions for the i2c-bus interface */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl @@ -27,7 +27,7 @@ #define _LINUX_I2C_H #include <linux/types.h> -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include <linux/module.h> #include <linux/i2c-id.h> #include <linux/mod_devicetable.h> @@ -53,8 +53,8 @@ union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices - * on a bus (or read from them). Apart from two basic transfer functions to - * transmit one message at a time, a more complex version can be used to + * on a bus (or read from them). Apart from two basic transfer functions to + * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); @@ -67,10 +67,10 @@ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, - and probably just as fast. + and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, +extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -112,14 +112,14 @@ struct i2c_driver { /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it + * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it + /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. @@ -139,13 +139,13 @@ struct i2c_driver { #define I2C_NAME_SIZE 50 /* - * i2c_client identifies a single device (i.e. chip) that is connected to an + * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned short addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ @@ -182,14 +182,14 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) */ struct i2c_algorithm { /* If an adapter algorithm can't do I2C-level access, set master_xfer - to NULL. If an adapter algorithm can do SMBus access, set + to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, + int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); - int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, + int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -216,6 +216,7 @@ struct i2c_adapter { int (*client_unregister)(struct i2c_client *); /* data fields that are valid for all devices */ + u8 level; /* nesting level for lockdep */ struct mutex bus_lock; struct mutex clist_lock; @@ -316,7 +317,7 @@ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ -extern int i2c_probe(struct i2c_adapter *adapter, +extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); @@ -352,15 +353,15 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) */ struct i2c_msg { __u16 addr; /* slave address */ - __u16 flags; + __u16 flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 #define I2C_M_IGNORE_NAK 0x1000 #define I2C_M_NO_RD_ACK 0x0800 - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ @@ -370,16 +371,16 @@ struct i2c_msg { #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ @@ -406,10 +407,10 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ I2C_FUNC_SMBUS_I2C_BLOCK) -/* - * Data for SMBus Messages +/* + * Data for SMBus Messages */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ union i2c_smbus_data { __u8 byte; __u16 word; @@ -421,11 +422,11 @@ union i2c_smbus_data { #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -/* SMBus transaction types (size parameter in the above functions) +/* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 @@ -434,15 +435,15 @@ union i2c_smbus_data { /* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the + * note that additional calls are defined in the algorithm and hw + * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ + /* acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ |