diff options
Diffstat (limited to 'include/media/v4l2-common.h')
| -rw-r--r-- | include/media/v4l2-common.h | 91 |
1 files changed, 82 insertions, 9 deletions
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index d3fd48157eb..d4030a7e16e 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -26,12 +26,56 @@ #ifndef V4L2_COMMON_H_ #define V4L2_COMMON_H_ -/* VIDIOC_INT_AUDIO_CLOCK_FREQ */ -enum v4l2_audio_clock_freq { - V4L2_AUDCLK_32_KHZ = 32000, - V4L2_AUDCLK_441_KHZ = 44100, - V4L2_AUDCLK_48_KHZ = 48000, -}; +/* v4l debugging and diagnostics */ + +/* Common printk constucts for v4l-i2c drivers. These macros create a unique + prefix consisting of the driver name, the adapter number and the i2c + address. */ +#define v4l_printk(level, name, adapter, addr, fmt, arg...) \ + printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) + +#define v4l_client_printk(level, client, fmt, arg...) \ + v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \ + (client)->addr, fmt , ## arg) + +#define v4l_err(client, fmt, arg...) \ + v4l_client_printk(KERN_ERR, client, fmt , ## arg) + +#define v4l_warn(client, fmt, arg...) \ + v4l_client_printk(KERN_WARNING, client, fmt , ## arg) + +#define v4l_info(client, fmt, arg...) \ + v4l_client_printk(KERN_INFO, client, fmt , ## arg) + +/* These three macros assume that the debug level is set with a module + parameter called 'debug'. */ +#define v4l_dbg(level, debug, client, fmt, arg...) \ + do { \ + if (debug >= (level)) \ + v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ + } while (0) + +/* Prints the ioctl in a human-readable format */ +extern void v4l_printk_ioctl(unsigned int cmd); + +/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */ +#define v4l_print_ioctl(name, cmd) \ + do { \ + printk(KERN_DEBUG "%s: ", name); \ + v4l_printk_ioctl(cmd); \ + } while (0) + +/* Use this macro in I2C drivers where 'client' is the struct i2c_client + pointer */ +#define v4l_i2c_print_ioctl(client, cmd) \ + do { \ + v4l_client_printk(KERN_DEBUG, client, ""); \ + v4l_printk_ioctl(cmd); \ + } while (0) + +/* ------------------------------------------------------------------------- */ + +/* Internal ioctls */ /* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */ struct v4l2_register { @@ -70,6 +114,27 @@ enum v4l2_chip_ident { V4L2_IDENT_CX25843 = 243, }; +/* audio ioctls */ +/* v4l device was opened in Radio mode */ +#define AUDC_SET_RADIO _IO('d',88) +/* select from TV,radio,extern,MUTE */ +#define AUDC_SET_INPUT _IOW('d',89,int) + +/* msp3400 ioctl: will be removed in the near future */ +struct msp_matrix { + int input; + int output; +}; +#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix) + +/* tuner ioctls */ +/* Sets tuner type and its I2C addr */ +#define TUNER_SET_TYPE_ADDR _IOW('d',90,int) +/* Puts tuner on powersaving state, disabling it, except for i2c */ +#define TUNER_SET_STANDBY _IOW('d',91,int) +/* Sets tda9887 specific stuff, like port1, port2 and qss */ +#define TDA9887_SET_CONFIG _IOW('d',92,int) + /* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */ #define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register) #define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register) @@ -77,10 +142,12 @@ enum v4l2_chip_ident { /* Reset the I2C chip */ #define VIDIOC_INT_RESET _IO ('d', 102) -/* Set the frequency of the audio clock output. +/* Set the frequency (in Hz) of the audio clock output. Used to slave an audio processor to the video decoder, ensuring that audio - and video remain synchronized. */ -#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOR ('d', 103, enum v4l2_audio_clock_freq) + and video remain synchronized. + Usual values for the frequency are 48000, 44100 or 32000 Hz. + If the frequency is not supported, then -EINVAL is returned. */ +#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOW ('d', 103, u32) /* Video decoders that support sliced VBI need to implement this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI @@ -107,4 +174,10 @@ enum v4l2_chip_ident { be made. */ #define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *) +/* Sets I2S speed in bps. This is used to provide a standard way to select I2S + clock used by driving digital audio streams at some board designs. + Usual values for the frequency are 1024000 and 2048000. + If the frequency is not supported, then -EINVAL is returned. */ +#define VIDIOC_INT_I2S_CLOCK_FREQ _IOW ('d', 108, u32) + #endif /* V4L2_COMMON_H_ */ |