diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 404 |
1 files changed, 312 insertions, 92 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c0610447697..2aff4906b2a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -73,6 +73,21 @@ */ /** + * DOC: mac80211 workqueue + * + * mac80211 provides its own workqueue for drivers and internal mac80211 use. + * The workqueue is a single threaded workqueue and can only be accessed by + * helpers for sanity checking. Drivers must ensure all work added onto the + * mac80211 workqueue should be cancelled on the driver stop() callback. + * + * mac80211 will flushed the workqueue upon interface removal and during + * suspend. + * + * All work performed on the mac80211 workqueue must not acquire the RTNL lock. + * + */ + +/** * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. @@ -204,7 +219,7 @@ struct ieee80211_bss_conf { * * These flags are used with the @flags member of &ieee80211_tx_info. * - * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence * number to this frame, taking care of not overwriting the fragment * number and increasing the sequence number only when the @@ -224,7 +239,14 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted - * because the destination STA was in powersave mode. + * because the destination STA was in powersave mode. Note that to + * avoid race conditions, the filter must be set by the hardware or + * firmware upon receiving a frame that indicates that the station + * went to sleep (must be done on device to filter frames already on + * the queue) and may only be unset after mac80211 gives the OK for + * that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above), + * since only then is it guaranteed that no more frames are in the + * hardware queue. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status * is for the whole aggregation. @@ -241,6 +263,15 @@ struct ieee80211_bss_conf { * it can be sent out. * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211, * used to indicate that a frame was already retried due to PS + * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, + * used to indicate frame should not be encrypted + * @IEEE80211_TX_CTL_PSPOLL_RESPONSE: (internal?) + * This frame is a response to a PS-poll frame and should be sent + * although the station is in powersave mode. + * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the + * transmit function after the current frame, this can be used + * by drivers to kick the DMA queue only if unset or when the + * queue gets full. */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -259,6 +290,9 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), + IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), + IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17), + IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), }; /** @@ -316,6 +350,21 @@ enum mac80211_rate_control_flags { * * When used for transmit status reporting, the driver should * always report the rate along with the flags it used. + * + * &struct ieee80211_tx_info contains an array of these structs + * in the control information, and it will be filled by the rate + * control algorithm according to what should be sent. For example, + * if this array contains, in the format { <idx>, <count> } the + * information + * { 3, 2 }, { 2, 2 }, { 1, 4 }, { -1, 0 }, { -1, 0 } + * then this means that the frame should be transmitted + * up to twice at rate 3, up to twice at rate 2, and up to four + * times at rate 1 if it doesn't get acknowledged. Say it gets + * acknowledged by the peer after the fifth attempt, the status + * information should then contain + * { 3, 2 }, { 2, 2 }, { 1, 1 }, { -1, 0 } ... + * since it was transmitted twice at rate 3, twice at rate 2 + * and once at rate 1 after which we received an acknowledgement. */ struct ieee80211_tx_rate { s8 idx; @@ -341,10 +390,12 @@ struct ieee80211_tx_rate { * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers - * @ampdu_ack_len: number of aggregated frames. + * @ampdu_ack_len: number of acked aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ack_signal: signal strength of the ACK frame */ struct ieee80211_tx_info { @@ -379,7 +430,8 @@ struct ieee80211_tx_info { u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - /* 8 bytes free */ + u8 ampdu_len; + /* 7 bytes free */ } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -397,6 +449,11 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) return (struct ieee80211_tx_info *)skb->cb; } +static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb) +{ + return (struct ieee80211_rx_status *)skb->cb; +} + /** * ieee80211_tx_info_clear_status - clear TX status * @@ -440,7 +497,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame. * Use together with %RX_FLAG_MMIC_STRIPPED. * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware. - * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header. * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame, * verification has been done by the hardware. * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame. @@ -457,11 +513,13 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used * @RX_FLAG_SHORT_GI: Short guard interval was used + * @RX_FLAG_INTERNAL_CMTR: set internally after frame was reported + * on cooked monitor to avoid double-reporting it for multiple + * virtual interfaces */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, RX_FLAG_DECRYPTED = 1<<1, - RX_FLAG_RADIOTAP = 1<<2, RX_FLAG_MMIC_STRIPPED = 1<<3, RX_FLAG_IV_STRIPPED = 1<<4, RX_FLAG_FAILED_FCS_CRC = 1<<5, @@ -471,6 +529,7 @@ enum mac80211_rx_flags { RX_FLAG_HT = 1<<9, RX_FLAG_40MHZ = 1<<10, RX_FLAG_SHORT_GI = 1<<11, + RX_FLAG_INTERNAL_CMTR = 1<<12, }; /** @@ -478,7 +537,7 @@ enum mac80211_rx_flags { * * The low-level driver should provide this information (the subset * supported by hardware) to the 802.11 code with each received - * frame. + * frame, in the skb's control buffer (cb). * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. @@ -500,7 +559,7 @@ struct ieee80211_rx_status { int freq; int signal; int noise; - int qual; + int __deprecated qual; int antenna; int rate_idx; int flag; @@ -511,7 +570,9 @@ struct ieee80211_rx_status { * * Flags to define PHY configuration options * - * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) + * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this + * to determine for example whether to calculate timestamps for packets + * or not, do not use instead of filter flags! * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set * the driver should be prepared to handle configuration requests but @@ -520,7 +581,7 @@ struct ieee80211_rx_status { * it can also be unset in that case when monitor interfaces are active. */ enum ieee80211_conf_flags { - IEEE80211_CONF_RADIOTAP = (1<<0), + IEEE80211_CONF_MONITOR = (1<<0), IEEE80211_CONF_PS = (1<<1), IEEE80211_CONF_IDLE = (1<<2), }; @@ -529,9 +590,8 @@ enum ieee80211_conf_flags { /** * enum ieee80211_conf_changed - denotes which configuration changed * - * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed - * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed + * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed @@ -539,9 +599,8 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { - _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), - IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), + IEEE80211_CONF_CHANGE_MONITOR = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), IEEE80211_CONF_CHANGE_POWER = BIT(5), IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), @@ -549,14 +608,6 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; -static inline __deprecated enum ieee80211_conf_changed -__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) -{ - return _IEEE80211_CONF_CHANGE_RADIO_ENABLED; -} -#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \ - __IEEE80211_CONF_CHANGE_RADIO_ENABLED() - /** * struct ieee80211_conf - configuration of the device * @@ -564,9 +615,6 @@ __IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) * * @flags: configuration flags defined above * - * @radio_enabled: when zero, driver is required to switch off the radio. - * @beacon_int: DEPRECATED, DO NOT USE - * * @listen_interval: listen interval in units of beacon interval * @max_sleep_period: the maximum number of beacon intervals to sleep for * before checking the beacon for a TIM bit (managed mode only); this @@ -590,13 +638,11 @@ __IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) * number of transmissions not the number of retries */ struct ieee80211_conf { - int __deprecated beacon_int; u32 flags; int power_level, dynamic_ps_timeout; int max_sleep_period; u16 listen_interval; - bool __deprecated radio_enabled; u8 long_frame_max_tx_count, short_frame_max_tx_count; @@ -813,6 +859,19 @@ enum ieee80211_tkip_key_type { * any particular flags. There are some exceptions to this rule, * however, so you are advised to review these flags carefully. * + * @IEEE80211_HW_HAS_RATE_CONTROL: + * The hardware or firmware includes rate control, and cannot be + * controlled by the stack. As such, no rate control algorithm + * should be instantiated, and the TX rate reported to userspace + * will be taken from the TX status instead of the rate control + * algorithm. + * Note that this requires that the driver implement a number of + * callbacks so it has the correct information, it needs to have + * the @set_rts_threshold callback and must look at the BSS config + * @use_cts_prot for G/N protection, @use_short_slot for slot + * timing in 2.4 GHz and @use_short_preamble for preambles for + * CCK frames. + * * @IEEE80211_HW_RX_INCLUDES_FCS: * Indicates that received frames passed to the stack include * the FCS at the end. @@ -871,6 +930,7 @@ enum ieee80211_tkip_key_type { * avoid waking up cpu. */ enum ieee80211_hw_flags { + IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, @@ -901,12 +961,6 @@ enum ieee80211_hw_flags { * * @conf: &struct ieee80211_conf, device configuration, don't use. * - * @workqueue: single threaded workqueue available for driver use, - * allocated by mac80211 on registration and flushed when an - * interface is removed. - * NOTICE: All work performed on this workqueue must not - * acquire the RTNL lock. - * * @priv: pointer to private area that was allocated for driver use * along with this structure. * @@ -942,7 +996,6 @@ enum ieee80211_hw_flags { struct ieee80211_hw { struct ieee80211_conf conf; struct wiphy *wiphy; - struct workqueue_struct *workqueue; const char *rate_control_algorithm; void *priv; u32 flags; @@ -1172,10 +1225,13 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * the driver's configure_filter() function which frames should be * passed to mac80211 and which should be filtered out. * - * The configure_filter() callback is invoked with the parameters - * @mc_count and @mc_list for the combined multicast address list - * of all virtual interfaces, @changed_flags telling which flags - * were changed and @total_flags with the new flag states. + * Before configure_filter() is invoked, the prepare_multicast() + * callback is invoked with the parameters @mc_count and @mc_list + * for the combined multicast address list of all virtual interfaces. + * It's use is optional, and it returns a u64 that is passed to + * configure_filter(). Additionally, configure_filter() has the + * arguments @changed_flags telling which flags were changed and + * @total_flags with the new flag states. * * If your device has no multicast address filters your driver will * need to check both the %FIF_ALLMULTI flag and the @mc_count @@ -1224,10 +1280,13 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * mac80211 needs to do and the amount of CPU wakeups, so you should * honour this flag if possible. * - * @FIF_CONTROL: pass control frames, if PROMISC_IN_BSS is not set then - * only those addressed to this station + * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS + * is not set then only those addressed to this station. * * @FIF_OTHER_BSS: pass frames destined to other BSSes + * + * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only + * those addressed to this station. */ enum ieee80211_filter_flags { FIF_PROMISC_IN_BSS = 1<<0, @@ -1237,6 +1296,7 @@ enum ieee80211_filter_flags { FIF_BCN_PRBRESP_PROMISC = 1<<4, FIF_CONTROL = 1<<5, FIF_OTHER_BSS = 1<<6, + FIF_PSPOLL = 1<<7, }; /** @@ -1244,6 +1304,12 @@ enum ieee80211_filter_flags { * * These flags are used with the ampdu_action() callback in * &struct ieee80211_ops to indicate which action is needed. + * + * Note that drivers MUST be able to deal with a TX aggregation + * session being stopped even before they OK'ed starting it by + * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer + * might receive the addBA frame and send a delBA right away! + * * @IEEE80211_AMPDU_RX_START: start Rx aggregation * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation * @IEEE80211_AMPDU_TX_START: start Tx aggregation @@ -1289,7 +1355,8 @@ enum ieee80211_ampdu_mlme_action { * is disabled. This should turn off the hardware (at least * it must turn off frame reception.) * May be called right after add_interface if that rejects - * an interface. + * an interface. If you added any work onto the mac80211 workqueue + * you should ensure to cancel it on this callback. * Must be implemented. * * @add_interface: Called when a netdevice attached to the hardware is @@ -1323,9 +1390,13 @@ enum ieee80211_ampdu_mlme_action { * for association indication. The @changed parameter indicates which * of the bss parameters has changed when a call is made. * + * @prepare_multicast: Prepare for multicast filter configuration. + * This callback is optional, and its return value is passed + * to configure_filter(). This callback must be atomic. + * * @configure_filter: Configure the device's RX filter. * See the section "Frame filtering" for more information. - * This callback must be implemented and atomic. + * This callback must be implemented. * * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit * must be set or cleared for a given STA. Must be atomic. @@ -1411,6 +1482,8 @@ enum ieee80211_ampdu_mlme_action { * @rfkill_poll: Poll rfkill hardware state. If you need this, you also * need to set wiphy->rfkill_poll to %true before registration, * and need to call wiphy_rfkill_set_hw_state() in the callback. + * + * @testmode_cmd: Implement a cfg80211 test mode command. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1425,10 +1498,12 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, u32 changed); + u64 (*prepare_multicast)(struct ieee80211_hw *hw, + int mc_count, struct dev_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, - int mc_count, struct dev_addr_list *mc_list); + u64 multicast); int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set); int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, @@ -1457,10 +1532,14 @@ struct ieee80211_ops { void (*reset_tsf)(struct ieee80211_hw *hw); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); void (*rfkill_poll)(struct ieee80211_hw *hw); +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); +#endif }; /** @@ -1606,32 +1685,23 @@ void ieee80211_free_hw(struct ieee80211_hw *hw); */ void ieee80211_restart_hw(struct ieee80211_hw *hw); -/* trick to avoid symbol clashes with the ieee80211 subsystem */ -void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_rx_status *status); - /** * ieee80211_rx - receive frame * * Use this function to hand received frames to mac80211. The receive - * buffer in @skb must start with an IEEE 802.11 header or a radiotap - * header if %RX_FLAG_RADIOTAP is set in the @status flags. + * buffer in @skb must start with an IEEE 802.11 header. * * This function may not be called in IRQ context. Calls to this function - * for a single hardware must be synchronized against each other. Calls - * to this function and ieee80211_rx_irqsafe() may not be mixed for a - * single hardware. + * for a single hardware must be synchronized against each other. Calls to + * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be + * mixed for a single hardware. + * + * In process context use instead ieee80211_rx_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call - * @status: status of this frame; the status pointer need not be valid - * after this function returns */ -static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_rx_status *status) -{ - __ieee80211_rx(hw, skb, status); -} +void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); /** * ieee80211_rx_irqsafe - receive frame @@ -1639,18 +1709,33 @@ static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, * Like ieee80211_rx() but can be called in IRQ context * (internally defers to a tasklet.) * - * Calls to this function and ieee80211_rx() may not be mixed for a - * single hardware. + * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not + * be mixed for a single hardware. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + */ +void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); + +/** + * ieee80211_rx_ni - receive frame (in process context) + * + * Like ieee80211_rx() but can be called in process context + * (internally disables bottom halves). + * + * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may + * not be mixed for a single hardware. * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call - * @status: status of this frame; the status pointer need not be valid - * after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ -void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_rx_status *status); +static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + local_bh_disable(); + ieee80211_rx(hw, skb); + local_bh_enable(); +} /** * ieee80211_tx_status - transmit status callback @@ -1686,19 +1771,45 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); /** - * ieee80211_beacon_get - beacon generation function + * ieee80211_beacon_get_tim - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @tim_offset: pointer to variable that will receive the TIM IE offset. + * Set to 0 if invalid (in non-AP modes). + * @tim_length: pointer to variable that will receive the TIM IE length, + * (including the ID and length bytes!). + * Set to 0 if invalid (in non-AP modes). + * + * If the driver implements beaconing modes, it must use this function to + * obtain the beacon frame/template. * * If the beacon frames are generated by the host system (i.e., not in - * hardware/firmware), the low-level driver uses this function to receive - * the next beacon frame from the 802.11 code. The low-level is responsible - * for calling this function before beacon data is needed (e.g., based on - * hardware interrupt). Returned skb is used only once and low-level driver - * is responsible for freeing it. + * hardware/firmware), the driver uses this function to get each beacon + * frame from mac80211 -- it is responsible for calling this function + * before the beacon is needed (e.g. based on hardware interrupt). + * + * If the beacon frames are generated by the device, then the driver + * must use the returned beacon as the template and change the TIM IE + * according to the current DTIM parameters/TIM bitmap. + * + * The driver is responsible for freeing the returned skb. + */ +struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u16 *tim_offset, u16 *tim_length); + +/** + * ieee80211_beacon_get - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * + * See ieee80211_beacon_get_tim(). */ -struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); +static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + return ieee80211_beacon_get_tim(hw, vif, NULL, NULL); +} /** * ieee80211_rts_get - RTS frame generation function @@ -1917,9 +2028,33 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, void *data); /** + * ieee80211_queue_work - add work onto the mac80211 workqueue + * + * Drivers and mac80211 use this to add work onto the mac80211 workqueue. + * This helper ensures drivers are not queueing work when they should not be. + * + * @hw: the hardware struct for the interface we are adding work for + * @work: the work we want to add onto the mac80211 workqueue + */ +void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work); + +/** + * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue + * + * Drivers and mac80211 use this to queue delayed work onto the mac80211 + * workqueue. + * + * @hw: the hardware struct for the interface we are adding work for + * @dwork: delayable work to queue onto the mac80211 workqueue + * @delay: number of jiffies to wait before queueing + */ +void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, + struct delayed_work *dwork, + unsigned long delay); + +/** * ieee80211_start_tx_ba_session - Start a tx Block Ack session. - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @ra: receiver address of the BA session recipient + * @sta: the station for which to start a BA session * @tid: the TID to BA on. * * Return: success if addBA request was sent, failure otherwise @@ -1928,22 +2063,22 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, * the need to start aggregation on a certain RA/TID, the session level * will be managed by the mac80211. */ -int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid); +int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid); /** * ieee80211_start_tx_ba_cb - low level driver ready to aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * * This function must be called by low level driver once it has * finished with preparations for the BA session. */ -void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); +void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); /** * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * @@ -1951,13 +2086,12 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); * finished with preparations for the BA session. * This version of the function is IRQ-safe. */ -void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid); /** * ieee80211_stop_tx_ba_session - Stop a Block Ack session. - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @ra: receiver address of the BA session recipient + * @sta: the station whose BA session to stop * @tid: the TID to stop BA. * @initiator: if indicates initiator DELBA frame will be sent. * @@ -1967,24 +2101,23 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, * the need to stop aggregation on a certain RA/TID, the session level * will be managed by the mac80211. */ -int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, - u8 *ra, u16 tid, +int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid, enum ieee80211_back_parties initiator); /** * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * * This function must be called by low level driver once it has * finished with preparations for the BA session tear down. */ -void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); +void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); /** * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * @@ -1992,22 +2125,75 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); * finished with preparations for the BA session tear down. * This version of the function is IRQ-safe. */ -void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid); /** * ieee80211_find_sta - find a station * - * @hw: pointer as obtained from ieee80211_alloc_hw() + * @vif: virtual interface to look for station on * @addr: station's address * * This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. */ -struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, +struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, const u8 *addr); /** + * ieee80211_find_sta_by_hw - find a station on hardware + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @addr: station's address + * + * This function must be called under RCU lock and the + * resulting pointer is only valid under RCU lock as well. + * + * NOTE: This function should not be used! When mac80211 is converted + * internally to properly keep track of stations on multiple + * virtual interfaces, it will not always know which station to + * return here since a single address might be used by multiple + * logical stations (e.g. consider a station connecting to another + * BSSID on the same AP hardware without disconnecting first). + * + * DO NOT USE THIS FUNCTION. + */ +struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw, + const u8 *addr); + +/** + * ieee80211_sta_block_awake - block station from waking up + * @hw: the hardware + * @pubsta: the station + * @block: whether to block or unblock + * + * Some devices require that all frames that are on the queues + * for a specific station that went to sleep are flushed before + * a poll response or frames after the station woke up can be + * delivered to that it. Note that such frames must be rejected + * by the driver as filtered, with the appropriate status flag. + * + * This function allows implementing this mode in a race-free + * manner. + * + * To do this, a driver must keep track of the number of frames + * still enqueued for a specific station. If this number is not + * zero when the station goes to sleep, the driver must call + * this function to force mac80211 to consider the station to + * be asleep regardless of the station's actual state. Once the + * number of outstanding frames reaches zero, the driver must + * call this function again to unblock the station. That will + * cause mac80211 to be able to send ps-poll responses, and if + * the station queried in the meantime then frames will also + * be sent out as a result of this. Additionally, the driver + * will be notified that the station woke up some time after + * it is unblocked, regardless of whether the station actually + * woke up while blocked or not. + */ +void ieee80211_sta_block_awake(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, bool block); + +/** * ieee80211_beacon_loss - inform hardware does not receive beacons * * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. @@ -2090,6 +2276,29 @@ static inline int rate_supported(struct ieee80211_sta *sta, return (sta == NULL || sta->supp_rates[band] & BIT(index)); } +/** + * rate_control_send_low - helper for drivers for management/no-ack frames + * + * Rate control algorithms that agree to use the lowest rate to + * send management frames and NO_ACK data with the respective hw + * retries should use this in the beginning of their mac80211 get_rate + * callback. If true is returned the rate control can simply return. + * If false is returned we guarantee that sta and sta and priv_sta is + * not null. + * + * Rate control algorithms wishing to do more intelligent selection of + * rate for multicast/broadcast frames may choose to not use this. + * + * @sta: &struct ieee80211_sta pointer to the target destination. Note + * that this may be null. + * @priv_sta: private rate control structure. This may be null. + * @txrc: rate control information we sholud populate for mac80211. + */ +bool rate_control_send_low(struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc); + + static inline s8 rate_lowest_index(struct ieee80211_supported_band *sband, struct ieee80211_sta *sta) @@ -2106,6 +2315,17 @@ rate_lowest_index(struct ieee80211_supported_band *sband, return 0; } +static inline +bool rate_usable_index_exists(struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + unsigned int i; + + for (i = 0; i < sband->n_bitrates; i++) + if (rate_supported(sta, sband->band, i)) + return true; + return false; +} int ieee80211_rate_control_register(struct rate_control_ops *ops); void ieee80211_rate_control_unregister(struct rate_control_ops *ops); |