aboutsummaryrefslogtreecommitdiff
path: root/include/net
diff options
context:
space:
mode:
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h897
-rw-r--r--include/net/mac80211.h117
-rw-r--r--include/net/regulatory.h101
-rw-r--r--include/net/wireless.h472
4 files changed, 953 insertions, 634 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5389afdc129..b8a76764e1c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1,71 +1,217 @@
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
#include <linux/netlink.h>
#include <linux/skbuff.h>
#include <linux/nl80211.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/genetlink.h>
+#include <net/regulatory.h>
+
/* remove once we remove the wext stuff */
#include <net/iw_handler.h>
+#include <linux/wireless.h>
+
/*
- * 802.11 configuration in-kernel interface
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
*
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
*/
+enum ieee80211_band {
+ IEEE80211_BAND_2GHZ,
+ IEEE80211_BAND_5GHZ,
+
+ /* keep last */
+ IEEE80211_NUM_BANDS
+};
/**
- * struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ * on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
+ * is not permitted.
+ * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
+ * is not permitted.
*/
-struct vif_params {
- u8 *mesh_id;
- int mesh_id_len;
+enum ieee80211_channel_flags {
+ IEEE80211_CHAN_DISABLED = 1<<0,
+ IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
+ IEEE80211_CHAN_NO_IBSS = 1<<2,
+ IEEE80211_CHAN_RADAR = 1<<3,
+ IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4,
+ IEEE80211_CHAN_NO_FAT_BELOW = 1<<5,
};
-/* Radiotap header iteration
- * implemented in net/wireless/radiotap.c
- * docs in Documentation/networking/radiotap-headers.txt
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ * code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ * has been found on this channel. Use regulatory_hint_found_beacon()
+ * to enable this, this is is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
*/
+struct ieee80211_channel {
+ enum ieee80211_band band;
+ u16 center_freq;
+ u8 max_bandwidth;
+ u16 hw_value;
+ u32 flags;
+ int max_antenna_gain;
+ int max_power;
+ bool beacon_found;
+ u32 orig_flags;
+ int orig_mag, orig_mpwr;
+};
+
/**
- * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
- * @rtheader: pointer to the radiotap header we are walking through
- * @max_length: length of radiotap header in cpu byte ordering
- * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
- * @this_arg: pointer to current radiotap arg
- * @arg_index: internal next argument index
- * @arg: internal next argument pointer
- * @next_bitmap: internal pointer to next present u32
- * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ * preamble on this bitrate; only relevant in 2.4GHz band and
+ * with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ * when used with 802.11a (on the 5 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ * when used with 802.11b (on the 2.4 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ * when used with 802.11g (on the 2.4 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
*/
+enum ieee80211_rate_flags {
+ IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
+ IEEE80211_RATE_MANDATORY_A = 1<<1,
+ IEEE80211_RATE_MANDATORY_B = 1<<2,
+ IEEE80211_RATE_MANDATORY_G = 1<<3,
+ IEEE80211_RATE_ERP_G = 1<<4,
+};
-struct ieee80211_radiotap_iterator {
- struct ieee80211_radiotap_header *rtheader;
- int max_length;
- int this_arg_index;
- u8 *this_arg;
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ * short preamble is used
+ */
+struct ieee80211_rate {
+ u32 flags;
+ u16 bitrate;
+ u16 hw_value, hw_value_short;
+};
- int arg_index;
- u8 *arg;
- __le32 *next_bitmap;
- u32 bitmap_shifter;
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+ u16 cap; /* use IEEE80211_HT_CAP_ */
+ bool ht_supported;
+ u8 ampdu_factor;
+ u8 ampdu_density;
+ struct ieee80211_mcs_info mcs;
};
-extern int ieee80211_radiotap_iterator_init(
- struct ieee80211_radiotap_iterator *iterator,
- struct ieee80211_radiotap_header *radiotap_header,
- int max_length);
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ * in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ * in this band. Must be sorted to give a valid "supported
+ * rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ */
+struct ieee80211_supported_band {
+ struct ieee80211_channel *channels;
+ struct ieee80211_rate *bitrates;
+ enum ieee80211_band band;
+ int n_channels;
+ int n_bitrates;
+ struct ieee80211_sta_ht_cap ht_cap;
+};
-extern int ieee80211_radiotap_iterator_next(
- struct ieee80211_radiotap_iterator *iterator);
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @mesh_id: mesh ID to use
+ * @mesh_id_len: length of the mesh ID
+ */
+struct vif_params {
+ u8 *mesh_id;
+ int mesh_id_len;
+};
- /**
+/**
* struct key_params - key information
*
* Information about a key
@@ -348,92 +494,6 @@ struct bss_parameters {
u8 basic_rates_len;
};
-/**
- * enum environment_cap - Environment parsed from country IE
- * @ENVIRON_ANY: indicates country IE applies to both indoor and
- * outdoor operation.
- * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
- * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
- */
-enum environment_cap {
- ENVIRON_ANY,
- ENVIRON_INDOOR,
- ENVIRON_OUTDOOR,
-};
-
-/**
- * struct regulatory_request - used to keep track of regulatory requests
- *
- * @wiphy_idx: this is set if this request's initiator is
- * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * can be used by the wireless core to deal with conflicts
- * and potentially inform users of which devices specifically
- * cased the conflicts.
- * @initiator: indicates who sent this request, could be any of
- * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
- * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * regulatory domain. We have a few special codes:
- * 00 - World regulatory domain
- * 99 - built by driver but a specific alpha2 cannot be determined
- * 98 - result of an intersection between two regulatory domains
- * @intersect: indicates whether the wireless core should intersect
- * the requested regulatory domain with the presently set regulatory
- * domain.
- * @country_ie_checksum: checksum of the last processed and accepted
- * country IE
- * @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * indoor, or if it doesn't matter
- * @list: used to insert into the reg_requests_list linked list
- */
-struct regulatory_request {
- int wiphy_idx;
- enum nl80211_reg_initiator initiator;
- char alpha2[2];
- bool intersect;
- u32 country_ie_checksum;
- enum environment_cap country_ie_env;
- struct list_head list;
-};
-
-struct ieee80211_freq_range {
- u32 start_freq_khz;
- u32 end_freq_khz;
- u32 max_bandwidth_khz;
-};
-
-struct ieee80211_power_rule {
- u32 max_antenna_gain;
- u32 max_eirp;
-};
-
-struct ieee80211_reg_rule {
- struct ieee80211_freq_range freq_range;
- struct ieee80211_power_rule power_rule;
- u32 flags;
-};
-
-struct ieee80211_regdomain {
- u32 n_reg_rules;
- char alpha2[2];
- struct ieee80211_reg_rule reg_rules[];
-};
-
-#define MHZ_TO_KHZ(freq) ((freq) * 1000)
-#define KHZ_TO_MHZ(freq) ((freq) / 1000)
-#define DBI_TO_MBI(gain) ((gain) * 100)
-#define MBI_TO_DBI(gain) ((gain) / 100)
-#define DBM_TO_MBM(gain) ((gain) * 100)
-#define MBM_TO_DBM(gain) ((gain) / 100)
-
-#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
- .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
- .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
- .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
- .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
- .power_rule.max_eirp = DBM_TO_MBM(eirp), \
- .flags = reg_flags, \
- }
-
struct mesh_config {
/* Timeouts in ms */
/* Mesh plink management parameters */
@@ -504,7 +564,7 @@ struct cfg80211_scan_request {
int n_ssids;
struct ieee80211_channel **channels;
u32 n_channels;
- u8 *ie;
+ const u8 *ie;
size_t ie_len;
/* internal */
@@ -659,6 +719,47 @@ struct cfg80211_disassoc_request {
};
/**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ * search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_fixed: The channel should be fixed -- do not search for
+ * IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ */
+struct cfg80211_ibss_params {
+ u8 *ssid;
+ u8 *bssid;
+ struct ieee80211_channel *channel;
+ u8 *ie;
+ u8 ssid_len, ie_len;
+ u16 beacon_interval;
+ bool channel_fixed;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ */
+enum wiphy_params_flags {
+ WIPHY_PARAM_RETRY_SHORT = 1 << 0,
+ WIPHY_PARAM_RETRY_LONG = 1 << 1,
+ WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
+ WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -733,6 +834,16 @@ struct cfg80211_disassoc_request {
* @assoc: Request to (re)associate with the specified peer
* @deauth: Request to deauthenticate from the specified peer
* @disassoc: Request to disassociate from the specified peer
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ * cfg80211_ibss_joined(), also call that function when changing BSSID due
+ * to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ * @changed bitfield (see &enum wiphy_params_flags) describes which values
+ * have changed. The actual parameter values are available in
+ * struct wiphy. If returning an error, no value should be changed.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -818,9 +929,414 @@ struct cfg80211_ops {
struct cfg80211_deauth_request *req);
int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_disassoc_request *req);
+
+ int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params);
+ int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+ int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+};
+
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
+ * @custom_regulatory: tells us the driver for this device
+ * has its own custom regulatory domain and cannot identify the
+ * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * we will disregard the first regulatory hint (when the
+ * initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * regulatory domain settings until it gets its own regulatory domain
+ * via its regulatory_hint(). After its gets its own regulatory domain
+ * it will only allow further regulatory domain settings to further
+ * enhance compliance. For example if channel 13 and 14 are disabled
+ * by this regulatory domain no user regulatory domain can enable these
+ * channels at a later time. This can be used for devices which do not
+ * have calibration information gauranteed for frequencies or settings
+ * outside of its regulatory domain.
+ * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * the regulatory_hint() API. This can be used by the driver
+ * on the reg_notifier() if it chooses to ignore future
+ * regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ * -1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ */
+struct wiphy {
+ /* assign these fields before you register the wiphy */
+
+ /* permanent MAC address */
+ u8 perm_addr[ETH_ALEN];
+
+ /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+ u16 interface_modes;
+
+ bool custom_regulatory;
+ bool strict_regulatory;
+
+ enum cfg80211_signal_type signal_type;
+
+ int bss_priv_size;
+ u8 max_scan_ssids;
+ u16 max_scan_ie_len;
+
+ int n_cipher_suites;
+ const u32 *cipher_suites;
+
+ u8 retry_short;
+ u8 retry_long;
+ u32 frag_threshold;
+ u32 rts_threshold;
+
+ /* If multiple wiphys are registered and you're handed e.g.
+ * a regular netdev with assigned ieee80211_ptr, you won't
+ * know whether it points to a wiphy your driver has registered
+ * or not. Assign this to something global to your driver to
+ * help determine whether you own this wiphy or not. */
+ void *privid;
+
+ struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+ /* Lets us get back the wiphy on the callback */
+ int (*reg_notifier)(struct wiphy *wiphy,
+ struct regulatory_request *request);
+
+ /* fields below are read-only, assigned by cfg80211 */
+
+ const struct ieee80211_regdomain *regd;
+
+ /* the item in /sys/class/ieee80211/ points to this,
+ * you need use set_wiphy_dev() (see below) */
+ struct device dev;
+
+ /* dir in debugfs: ieee80211/<wiphyname> */
+ struct dentry *debugfsdir;
+
+ char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+ BUG_ON(!wiphy);
+ return &wiphy->priv;
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+ wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+ return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(struct wiphy *wiphy)
+{
+ return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @wext_bssid: (private) Used by the internal wireless extensions compat code
+ */
+struct wireless_dev {
+ struct wiphy *wiphy;
+ enum nl80211_iftype iftype;
+
+ /* private to the generic wireless code */
+ struct list_head list;
+ struct net_device *netdev;
+
+ /* currently used for IBSS - might be rearranged in the future */
+ struct cfg80211_bss *current_bss;
+ u8 bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+
+#ifdef CONFIG_WIRELESS_EXT
+ /* wext data */
+ struct cfg80211_ibss_params wext;
+ u8 wext_bssid[ETH_ALEN];
+#endif
+};
+
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+ BUG_ON(!wdev);
+ return wiphy_priv(wdev->wiphy);
+}
+
+/*
+ * Utility functions
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ */
+extern int ieee80211_channel_to_frequency(int chan);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+ int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+ return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+ u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+ struct ieee80211_radiotap_header *rtheader;
+ int max_length;
+ int this_arg_index;
+ u8 *this_arg;
+
+ int arg_index;
+ u8 *arg;
+ __le32 *next_bitmap;
+ u32 bitmap_shifter;
};
-/* temporary wext handlers */
+extern int ieee80211_radiotap_iterator_init(
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+ struct ieee80211_radiotap_iterator *iterator);
+
+/*
+ * Regulatory helper functions for wiphys
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ * conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * should be in. If @rd is set this should be NULL. Note that if you
+ * set this to NULL you should still set rd->alpha2 to some accepted
+ * alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * regulatory_hint_11d - hints a country IE as a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ * conflicts)
+ * @country_ie: pointer to the country IE
+ * @country_ie_len: length of the country IE
+ *
+ * We will intersect the rd with the what CRDA tells us should apply
+ * for the alpha2 this country IE belongs to, this prevents APs from
+ * sending us incorrect or outdated information against a country.
+ */
+extern void regulatory_hint_11d(struct wiphy *wiphy,
+ u8 *country_ie,
+ u8 country_ie_len);
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+ struct wiphy *wiphy,
+ const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
+ * you can set this to 0. If this frequency is allowed we then set
+ * this value to the maximum allowed bandwidth.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
+ const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * In the future cfg80211 will simply assign the entire wext handler
+ * structure to netdevs it manages, but we're not there yet.
+ */
int cfg80211_wext_giwname(struct net_device *dev,
struct iw_request_info *info,
char *name, char *extra);
@@ -834,9 +1350,57 @@ int cfg80211_wext_siwscan(struct net_device *dev,
int cfg80211_wext_giwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra);
+int cfg80211_wext_siwmlme(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra);
int cfg80211_wext_giwrange(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra);
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+ struct iw_freq *freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frag, char *extra);
+int cfg80211_wext_siwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *retry, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *retry, char *extra);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
/**
* cfg80211_scan_done - notify that scan finished
@@ -864,6 +1428,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
struct ieee80211_mgmt *mgmt, size_t len,
s32 signal, gfp_t gfp);
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ const u8 *bssid,
+ u64 timestamp, u16 capability, u16 beacon_interval,
+ const u8 *ie, size_t ielen,
+ s32 signal, gfp_t gfp);
+
struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
struct ieee80211_channel *channel,
const u8 *bssid,
@@ -883,6 +1455,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
const u8 *meshid, size_t meshidlen,
const u8 *meshcfg);
void cfg80211_put_bss(struct cfg80211_bss *bss);
+
/**
* cfg80211_unlink_bss - unlink BSS from internal data structures
* @wiphy: the wiphy
@@ -902,44 +1475,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
* @len: length of the frame data
*
* This function is called whenever an authentication has been processed in
- * station mode.
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call.
*/
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
/**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
* cfg80211_send_rx_assoc - notification of processed association
* @dev: network device
* @buf: (re)association response frame (header + body)
* @len: length of the frame data
*
* This function is called whenever a (re)association response has been
- * processed in station mode.
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call.
*/
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_rx_deauth - notification of processed deauthentication
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
*
* This function is called whenever deauthentication has been processed in
- * station mode.
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones.
*/
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_rx_disassoc - notification of processed disassociation
+ * cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
* @len: length of the frame data
*
* This function is called whenever disassociation has been processed in
- * station mode.
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones.
*/
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
/**
* cfg80211_hold_bss - exclude bss from expiration
@@ -958,4 +1549,36 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss);
*/
void cfg80211_unhold_bss(struct cfg80211_bss *bss);
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3)
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+ enum nl80211_key_type key_type, int key_id,
+ const u8 *tsc);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
#endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3b83a80e3fe..446dbf75a1c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
#include <linux/wireless.h>
#include <linux/device.h>
#include <linux/ieee80211.h>
-#include <net/wireless.h>
#include <net/cfg80211.h>
/**
@@ -518,7 +517,7 @@ struct ieee80211_rx_status {
* Flags to define PHY configuration options
*
* @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
*/
enum ieee80211_conf_flags {
IEEE80211_CONF_RADIOTAP = (1<<0),
@@ -533,8 +532,7 @@ enum ieee80211_conf_flags {
* @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
- * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
@@ -545,10 +543,9 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
- IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5),
- IEEE80211_CONF_CHANGE_POWER = BIT(6),
- IEEE80211_CONF_CHANGE_CHANNEL = BIT(7),
- IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8),
+ IEEE80211_CONF_CHANGE_POWER = BIT(5),
+ IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
+ IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
};
/**
@@ -556,14 +553,26 @@ enum ieee80211_conf_changed {
*
* This struct indicates how the driver shall configure the hardware.
*
+ * @flags: configuration flags defined above
+ *
* @radio_enabled: when zero, driver is required to switch off the radio.
* @beacon_int: beacon interval (TODO make interface config)
+ *
* @listen_interval: listen interval in units of beacon interval
- * @flags: configuration flags defined above
+ * @max_sleep_interval: the maximum number of beacon intervals to sleep for
+ * before checking the beacon for a TIM bit (managed mode only); this
+ * value will be only achievable between DTIM frames, the hardware
+ * needs to check for the multicast traffic bit in DTIM beacons.
+ * This variable is valid only when the CONF_PS flag is set.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ * powersave documentation below. This variable is valid only when
+ * the CONF_PS flag is set.
+ *
* @power_level: requested transmit power (in dBm)
- * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
+ *
* @channel: the channel to tune to
* @channel_type: the channel (HT) type
+ *
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
* but actually means the number of transmissions not the number of retries
@@ -575,6 +584,7 @@ struct ieee80211_conf {
int beacon_int;
u32 flags;
int power_level, dynamic_ps_timeout;
+ int max_sleep_interval;
u16 listen_interval;
bool radio_enabled;
@@ -1109,11 +1119,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* need software support for parsing the TIM bitmap. This is also supported
* by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
* %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
- * required to pass up beacons. Additionally, in this case, mac80211 will
- * wake up the hardware when multicast traffic is announced in the beacon.
- *
- * FIXME: I don't think we can be fast enough in software when we want to
- * receive multicast traffic?
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow.
*
* Dynamic powersave mode is an extension to normal powersave mode in which
* the hardware stays awake for a user-specified period of time after sending
@@ -1134,11 +1142,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* way the host will only receive beacons where some relevant information
* (for example ERP protection or WMM settings) have changed.
*
- * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag.
- * The driver needs to enable beacon filter support whenever power save is
- * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled,
- * the stack will not check for beacon miss at all and the driver needs to
- * notify about complete loss of beacons with ieee80211_beacon_loss().
+ * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * hardware capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ * - a list of information element IDs
+ * - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
*/
/**
@@ -1330,11 +1380,14 @@ enum ieee80211_ampdu_mlme_action {
* the scan state machine in stack. The scan must honour the channel
* configuration done by the regulatory agent in the wiphy's
* registered bands. The hardware (or the driver) needs to make sure
- * that power save is disabled. When the scan finishes,
- * ieee80211_scan_completed() must be called; note that it also must
- * be called when the scan cannot finish because the hardware is
- * turned off! Anything else is a bug! Returns a negative error code
- * which will be seen in userspace.
+ * that power save is disabled.
+ * The @req ie/ie_len members are rewritten by mac80211 to contain the
+ * entire IEs after the SSID, so that drivers need not look at these
+ * at all but just send them after the SSID -- mac80211 includes the
+ * (extended) supported rates and HT information (where applicable).
+ * When the scan finishes, ieee80211_scan_completed() must be called;
+ * note that it also must be called when the scan cannot finish due to
+ * any error unless this callback returned a negative error code.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
@@ -1572,6 +1625,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw);
*/
void ieee80211_free_hw(struct ieee80211_hw *hw);
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
/* trick to avoid symbol clashes with the ieee80211 subsystem */
void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_rx_status *status);
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
new file mode 100644
index 00000000000..47995b81c5d
--- /dev/null
+++ b/include/net/regulatory.h
@@ -0,0 +1,101 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ * outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+ ENVIRON_ANY,
+ ENVIRON_INDOOR,
+ ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * can be used by the wireless core to deal with conflicts
+ * and potentially inform users of which devices specifically
+ * cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * regulatory domain. We have a few special codes:
+ * 00 - World regulatory domain
+ * 99 - built by driver but a specific alpha2 cannot be determined
+ * 98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * the requested regulatory domain with the presently set regulatory
+ * domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+ int wiphy_idx;
+ enum nl80211_reg_initiator initiator;
+ char alpha2[2];
+ bool intersect;
+ u32 country_ie_checksum;
+ enum environment_cap country_ie_env;
+ struct list_head list;
+};
+
+struct ieee80211_freq_range {
+ u32 start_freq_khz;
+ u32 end_freq_khz;
+ u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+ u32 max_antenna_gain;
+ u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+ struct ieee80211_freq_range freq_range;
+ struct ieee80211_power_rule power_rule;
+ u32 flags;
+};
+
+struct ieee80211_regdomain {
+ u32 n_reg_rules;
+ char alpha2[2];
+ struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{ \
+ .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
+ .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
+ .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
+ .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+ .power_rule.max_eirp = DBM_TO_MBM(eirp), \
+ .flags = reg_flags, \
+}
+
+#endif
diff --git a/include/net/wireless.h b/include/net/wireless.h
deleted file mode 100644
index 64a76208580..00000000000
--- a/include/net/wireless.h
+++ /dev/null
@@ -1,472 +0,0 @@
-#ifndef __NET_WIRELESS_H
-#define __NET_WIRELESS_H
-
-/*
- * 802.11 device management
- *
- * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
- */
-
-#include <linux/netdevice.h>
-#include <linux/debugfs.h>
-#include <linux/list.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-/**
- * enum ieee80211_band - supported frequency bands
- *
- * The bands are assigned this way because the supported
- * bitrates differ in these bands.
- *
- * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
- * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
- */
-enum ieee80211_band {
- IEEE80211_BAND_2GHZ,
- IEEE80211_BAND_5GHZ,
-
- /* keep last */
- IEEE80211_NUM_BANDS
-};
-
-/**
- * enum ieee80211_channel_flags - channel flags
- *
- * Channel flags set by the regulatory control code.
- *
- * @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- * on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
- * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
- * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
- * is not permitted.
- * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
- * is not permitted.
- */
-enum ieee80211_channel_flags {
- IEEE80211_CHAN_DISABLED = 1<<0,
- IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
- IEEE80211_CHAN_NO_IBSS = 1<<2,
- IEEE80211_CHAN_RADAR = 1<<3,
- IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4,
- IEEE80211_CHAN_NO_FAT_BELOW = 1<<5,
-};
-
-/**
- * struct ieee80211_channel - channel definition
- *
- * This structure describes a single channel for use
- * with cfg80211.
- *
- * @center_freq: center frequency in MHz
- * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
- * @hw_value: hardware-specific value for the channel
- * @flags: channel flags from &enum ieee80211_channel_flags.
- * @orig_flags: channel flags at registration time, used by regulatory
- * code to support devices with additional restrictions
- * @band: band this channel belongs to.
- * @max_antenna_gain: maximum antenna gain in dBi
- * @max_power: maximum transmission power (in dBm)
- * @beacon_found: helper to regulatory code to indicate when a beacon
- * has been found on this channel. Use regulatory_hint_found_beacon()
- * to enable this, this is is useful only on 5 GHz band.
- * @orig_mag: internal use
- * @orig_mpwr: internal use
- */
-struct ieee80211_channel {
- enum ieee80211_band band;
- u16 center_freq;
- u8 max_bandwidth;
- u16 hw_value;
- u32 flags;
- int max_antenna_gain;
- int max_power;
- bool beacon_found;
- u32 orig_flags;
- int orig_mag, orig_mpwr;
-};
-
-/**
- * enum ieee80211_rate_flags - rate flags
- *
- * Hardware/specification flags for rates. These are structured
- * in a way that allows using the same bitrate structure for
- * different bands/PHY modes.
- *
- * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
- * preamble on this bitrate; only relevant in 2.4GHz band and
- * with CCK rates.
- * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
- * when used with 802.11a (on the 5 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
- * when used with 802.11b (on the 2.4 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
- * when used with 802.11g (on the 2.4 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
- */
-enum ieee80211_rate_flags {
- IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
- IEEE80211_RATE_MANDATORY_A = 1<<1,
- IEEE80211_RATE_MANDATORY_B = 1<<2,
- IEEE80211_RATE_MANDATORY_G = 1<<3,
- IEEE80211_RATE_ERP_G = 1<<4,
-};
-
-/**
- * struct ieee80211_rate - bitrate definition
- *
- * This structure describes a bitrate that an 802.11 PHY can
- * operate with. The two values @hw_value and @hw_value_short
- * are only for driver use when pointers to this structure are
- * passed around.
- *
- * @flags: rate-specific flags
- * @bitrate: bitrate in units of 100 Kbps
- * @hw_value: driver/hardware value for this rate
- * @hw_value_short: driver/hardware value for this rate when
- * short preamble is used
- */
-struct ieee80211_rate {
- u32 flags;
- u16 bitrate;
- u16 hw_value, hw_value_short;
-};
-
-/**
- * struct ieee80211_sta_ht_cap - STA's HT capabilities
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT capabilities for an STA.
- *
- * @ht_supported: is HT supported by the STA
- * @cap: HT capabilities map as described in 802.11n spec
- * @ampdu_factor: Maximum A-MPDU length factor
- * @ampdu_density: Minimum A-MPDU spacing
- * @mcs: Supported MCS rates
- */
-struct ieee80211_sta_ht_cap {
- u16 cap; /* use IEEE80211_HT_CAP_ */
- bool ht_supported;
- u8 ampdu_factor;
- u8 ampdu_density;
- struct ieee80211_mcs_info mcs;
-};
-
-/**
- * struct ieee80211_supported_band - frequency band definition
- *
- * This structure describes a frequency band a wiphy
- * is able to operate in.
- *
- * @channels: Array of channels the hardware can operate in
- * in this band.
- * @band: the band this structure represents
- * @n_channels: Number of channels in @channels
- * @bitrates: Array of bitrates the hardware can operate with
- * in this band. Must be sorted to give a valid "supported
- * rates" IE, i.e. CCK rates first, then OFDM.
- * @n_bitrates: Number of bitrates in @bitrates
- */
-struct ieee80211_supported_band {
- struct ieee80211_channel *channels;
- struct ieee80211_rate *bitrates;
- enum ieee80211_band band;
- int n_channels;
- int n_bitrates;
- struct ieee80211_sta_ht_cap ht_cap;
-};
-
-/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
- * has its own custom regulatory domain and cannot identify the
- * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * we will disregard the first regulatory hint (when the
- * initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * regulatory domain settings until it gets its own regulatory domain
- * via its regulatory_hint(). After its gets its own regulatory domain
- * it will only allow further regulatory domain settings to further
- * enhance compliance. For example if channel 13 and 14 are disabled
- * by this regulatory domain no user regulatory domain can enable these
- * channels at a later time. This can be used for devices which do not
- * have calibration information gauranteed for frequencies or settings
- * outside of its regulatory domain.
- * @reg_notifier: the driver's regulatory notification callback
- * @regd: the driver's regulatory domain, if one was requested via
- * the regulatory_hint() API. This can be used by the driver
- * on the reg_notifier() if it chooses to ignore future
- * regulatory domain changes caused by other drivers.
- * @signal_type: signal type reported in &struct cfg80211_bss.
- */
-struct wiphy {
- /* assign these fields before you register the wiphy */
-
- /* permanent MAC address */
- u8 perm_addr[ETH_ALEN];
-
- /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
- u16 interface_modes;
-
- bool custom_regulatory;
- bool strict_regulatory;
-
- enum cfg80211_signal_type signal_type;
-
- int bss_priv_size;
- u8 max_scan_ssids;
-
- /* If multiple wiphys are registered and you're handed e.g.
- * a regular netdev with assigned ieee80211_ptr, you won't
- * know whether it points to a wiphy your driver has registered
- * or not. Assign this to something global to your driver to
- * help determine whether you own this wiphy or not. */
- void *privid;
-
- struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
-
- /* Lets us get back the wiphy on the callback */
- int (*reg_notifier)(struct wiphy *wiphy,
- struct regulatory_request *request);
-
- /* fields below are read-only, assigned by cfg80211 */
-
- const struct ieee80211_regdomain *regd;
-
- /* the item in /sys/class/ieee80211/ points to this,
- * you need use set_wiphy_dev() (see below) */
- struct device dev;
-
- /* dir in debugfs: ieee80211/<wiphyname> */
- struct dentry *debugfsdir;
-
- char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
-};
-
-/** struct wireless_dev - wireless per-netdev state
- *
- * This structure must be allocated by the driver/stack
- * that uses the ieee80211_ptr field in struct net_device
- * (this is intentional so it can be allocated along with
- * the netdev.)
- *
- * @wiphy: pointer to hardware description
- * @iftype: interface type
- */
-struct wireless_dev {
- struct wiphy *wiphy;
- enum nl80211_iftype iftype;
-
- /* private to the generic wireless code */
- struct list_head list;
- struct net_device *netdev;
-};
-
-/**
- * wiphy_priv - return priv from wiphy
- */
-static inline void *wiphy_priv(struct wiphy *wiphy)
-{
- BUG_ON(!wiphy);
- return &wiphy->priv;
-}
-
-/**
- * set_wiphy_dev - set device pointer for wiphy
- */
-static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
-{
- wiphy->dev.parent = dev;
-}
-
-/**
- * wiphy_dev - get wiphy dev pointer
- */
-static inline struct device *wiphy_dev(struct wiphy *wiphy)
-{
- return wiphy->dev.parent;
-}
-
-/**
- * wiphy_name - get wiphy name
- */
-static inline const char *wiphy_name(struct wiphy *wiphy)
-{
- return dev_name(&wiphy->dev);
-}
-
-/**
- * wdev_priv - return wiphy priv from wireless_dev
- */
-static inline void *wdev_priv(struct wireless_dev *wdev)
-{
- BUG_ON(!wdev);
- return wiphy_priv(wdev->wiphy);
-}
-
-/**
- * wiphy_new - create a new wiphy for use with cfg80211
- *
- * create a new wiphy and associate the given operations with it.
- * @sizeof_priv bytes are allocated for private use.
- *
- * the returned pointer must be assigned to each netdev's
- * ieee80211_ptr for proper operation.
- */
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
-
-/**
- * wiphy_register - register a wiphy with cfg80211
- *
- * register the given wiphy
- *
- * Returns a non-negative wiphy index or a negative error code.
- */
-extern int wiphy_register(struct wiphy *wiphy);
-
-/**
- * wiphy_unregister - deregister a wiphy from cfg80211
- *
- * unregister a device with the given priv pointer.
- * After this call, no more requests can be made with this priv
- * pointer, but the call may sleep to wait for an outstanding
- * request that is being handled.
- */
-extern void wiphy_unregister(struct wiphy *wiphy);
-
-/**
- * wiphy_free - free wiphy
- */
-extern void wiphy_free(struct wiphy *wiphy);
-
-/**
- * ieee80211_channel_to_frequency - convert channel number to frequency
- */
-extern int ieee80211_channel_to_frequency(int chan);
-
-/**
- * ieee80211_frequency_to_channel - convert frequency to channel number
- */
-extern int ieee80211_frequency_to_channel(int freq);
-
-/*
- * Name indirection necessary because the ieee80211 code also has
- * a function named "ieee80211_get_channel", so if you include
- * cfg80211's header file you get cfg80211's version, if you try
- * to include both header files you'll (rightfully!) get a symbol
- * clash.
- */
-extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
- int freq);
-/**
- * ieee80211_get_channel - get channel struct from wiphy for specified frequency
- */
-static inline struct ieee80211_channel *
-ieee80211_get_channel(struct wiphy *wiphy, int freq)
-{
- return __ieee80211_get_channel(wiphy, freq);
-}
-
-/**
- * ieee80211_get_response_rate - get basic rate for a given rate
- *
- * @sband: the band to look for rates in
- * @basic_rates: bitmap of basic rates
- * @bitrate: the bitrate for which to find the basic rate
- *
- * This function returns the basic rate corresponding to a given
- * bitrate, that is the next lower bitrate contained in the basic
- * rate map, which is, for this function, given as a bitmap of
- * indices of rates in the band's bitrate table.
- */
-struct ieee80211_rate *
-ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
- u32 basic_rates, int bitrate);
-
-/**
- * regulatory_hint - driver hint to the wireless core a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- * conflicts)
- * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * should be in. If @rd is set this should be NULL. Note that if you
- * set this to NULL you should still set rd->alpha2 to some accepted
- * alpha2.
- *
- * Wireless drivers can use this function to hint to the wireless core
- * what it believes should be the current regulatory domain by
- * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
- * domain should be in or by providing a completely build regulatory domain.
- * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
- * for a regulatory domain structure for the respective country.
- *
- * The wiphy must have been registered to cfg80211 prior to this call.
- * For cfg80211 drivers this means you must first use wiphy_register(),
- * for mac80211 drivers you must first use ieee80211_register_hw().
- *
- * Drivers should check the return value, its possible you can get
- * an -ENOMEM.
- */
-extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
-
-/**
- * regulatory_hint_11d - hints a country IE as a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- * conflicts)
- * @country_ie: pointer to the country IE
- * @country_ie_len: length of the country IE
- *
- * We will intersect the rd with the what CRDA tells us should apply
- * for the alpha2 this country IE belongs to, this prevents APs from
- * sending us incorrect or outdated information against a country.
- */
-extern void regulatory_hint_11d(struct wiphy *wiphy,
- u8 *country_ie,
- u8 country_ie_len);
-/**
- * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
- * @wiphy: the wireless device we want to process the regulatory domain on
- * @regd: the custom regulatory domain to use for this wiphy
- *
- * Drivers can sometimes have custom regulatory domains which do not apply
- * to a specific country. Drivers can use this to apply such custom regulatory
- * domains. This routine must be called prior to wiphy registration. The
- * custom regulatory domain will be trusted completely and as such previous
- * default channel settings will be disregarded. If no rule is found for a
- * channel on the regulatory domain the channel will be disabled.
- */
-extern void wiphy_apply_custom_regulatory(
- struct wiphy *wiphy,
- const struct ieee80211_regdomain *regd);
-
-/**
- * freq_reg_info - get regulatory information for the given frequency
- * @wiphy: the wiphy for which we want to process this rule for
- * @center_freq: Frequency in KHz for which we want regulatory information for
- * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
- * you can set this to 0. If this frequency is allowed we then set
- * this value to the maximum allowed bandwidth.
- * @reg_rule: the regulatory rule which we have for this frequency
- *
- * Use this function to get the regulatory rule for a specific frequency on
- * a given wireless device. If the device has a specific regulatory domain
- * it wants to follow we respect that unless a country IE has been received
- * and processed already.
- *
- * Returns 0 if it was able to find a valid regulatory rule which does
- * apply to the given center_freq otherwise it returns non-zero. It will
- * also return -ERANGE if we determine the given center_freq does not even have
- * a regulatory rule for a frequency range in the center_freq's band. See
- * freq_in_rule_band() for our current definition of a band -- this is purely
- * subjective and right now its 802.11 specific.
- */
-extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
- const struct ieee80211_reg_rule **reg_rule);
-
-#endif /* __NET_WIRELESS_H */