diff options
Diffstat (limited to 'include/scsi')
| -rw-r--r-- | include/scsi/Kbuild | 4 | ||||
| -rw-r--r-- | include/scsi/scsi_bsg_fc.h | 322 | ||||
| -rw-r--r-- | include/scsi/scsi_host.h | 9 | ||||
| -rw-r--r-- | include/scsi/scsi_transport_fc.h | 52 |
4 files changed, 385 insertions, 2 deletions
diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild new file mode 100644 index 00000000000..33b2750e928 --- /dev/null +++ b/include/scsi/Kbuild @@ -0,0 +1,4 @@ +header-y += scsi.h +header-y += scsi_netlink.h +header-y += scsi_netlink_fc.h +header-y += scsi_bsg_fc.h diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h new file mode 100644 index 00000000000..a4b23331817 --- /dev/null +++ b/include/scsi/scsi_bsg_fc.h @@ -0,0 +1,322 @@ +/* + * FC Transport BSG Interface + * + * Copyright (C) 2008 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef SCSI_BSG_FC_H +#define SCSI_BSG_FC_H + +/* + * This file intended to be included by both kernel and user space + */ + +#include <scsi/scsi.h> + +/* + * FC Transport SGIO v4 BSG Message Support + */ + +/* Default BSG request timeout (in seconds) */ +#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ) + + +/* + * Request Message Codes supported by the FC Transport + */ + +/* define the class masks for the message codes */ +#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */ +#define FC_BSG_HST_MASK 0x80000000 /* fc host class */ +#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */ + + /* fc_host Message Codes */ +#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001) +#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002) +#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003) +#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004) +#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF) + + /* fc_rport Message Codes */ +#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001) +#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002) + + + +/* + * FC Address Identifiers in Message Structures : + * + * Whenever a command payload contains a FC Address Identifier + * (aka port_id), the value is effectively in big-endian + * order, thus the array elements are decoded as follows: + * element [0] is bits 23:16 of the FC Address Identifier + * element [1] is bits 15:8 of the FC Address Identifier + * element [2] is bits 7:0 of the FC Address Identifier + */ + + +/* + * FC Host Messages + */ + +/* FC_BSG_HST_ADDR_PORT : */ + +/* Request: + * This message requests the FC host to login to the remote port + * at the specified N_Port_Id. The remote port is to be enumerated + * with the transport upon completion of the login. + */ +struct fc_bsg_host_add_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to login to */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_DEL_RPORT : */ + +/* Request: + * This message requests the FC host to remove an enumerated + * remote port and to terminate the login to it. + * + * Note: The driver is free to reject this request if it desires to + * remain logged in with the remote port. + */ +struct fc_bsg_host_del_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to logout of */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_ELS_NOLOGIN : */ + +/* Request: + * This message requests the FC_Host to send an ELS to a specific + * N_Port_ID. The host does not need to log into the remote port, + * nor does it need to enumerate the rport for further traffic + * (although, the FC host is free to do so if it desires). + */ +struct fc_bsg_host_els { + /* + * ELS Command Code being sent (must be the same as byte 0 + * of the payload) + */ + uint8_t command_code; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; +}; + +/* Response: + */ +/* fc_bsg_ctels_reply->status values */ +#define FC_CTELS_STATUS_OK 0x00000000 +#define FC_CTELS_STATUS_REJECT 0x00000001 +#define FC_CTELS_STATUS_P_RJT 0x00000002 +#define FC_CTELS_STATUS_F_RJT 0x00000003 +#define FC_CTELS_STATUS_P_BSY 0x00000004 +#define FC_CTELS_STATUS_F_BSY 0x00000006 +struct fc_bsg_ctels_reply { + /* + * Note: An ELS LS_RJT may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the ELS receive payload to determine + * LS_ACC or LS_RJT (by contents of word 0). The reject + * data will be in word 1. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and + * the receive payload word 0 indicates LS_ACC + * (e.g. value is 0x02xxxxxx). + * + * Note: Similarly, a CT Reject may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the CT receive payload to determine + * Accept or Reject (by contents of word 2). The reject + * data will be in word 3. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: x_RJT/BSY status will indicae that the rjt_data field + * is valid and contains the reason/explanation values. + */ + uint32_t status; /* See FC_CTELS_STATUS_xxx */ + + /* valid if status is not FC_CTELS_STATUS_OK */ + struct { + uint8_t action; /* fragment_id for CT REJECT */ + uint8_t reason_code; + uint8_t reason_explanation; + uint8_t vendor_unique; + } rjt_data; +}; + + +/* FC_BSG_HST_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the + * indicated N_Port_ID. The driver is responsible for logging in with + * the fabric and/or N_Port_ID, etc as per FC rules. This request does + * not mandate that the driver must enumerate the destination in the + * transport. The driver is allowed to decide whether to enumerate it, + * and whether to tear it down after the request. + */ +struct fc_bsg_host_ct { + uint8_t reserved; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; + + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ + +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_HST_VENDOR : */ + +/* Request: + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified in scsi_netlink.h + */ +struct fc_bsg_host_vendor { + /* + * Identifies the vendor that the message is formatted for. This + * should be the recipient of the message. + */ + uint64_t vendor_id; + + /* start of vendor command area */ + uint32_t vendor_cmd[0]; +}; + +/* Response: + */ +struct fc_bsg_host_vendor_reply { + /* start of vendor response area */ + uint32_t vendor_rsp[0]; +}; + + + +/* + * FC Remote Port Messages + */ + +/* FC_BSG_RPT_ELS : */ + +/* Request: + * This message requests that an ELS be performed with the rport. + */ +struct fc_bsg_rport_els { + /* + * ELS Command Code being sent (must be the same as + * byte 0 of the payload) + */ + uint8_t els_code; +}; + +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_RPT_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the rport. + */ +struct fc_bsg_rport_ct { + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + + + +/* request (CDB) structure of the sg_io_v4 */ +struct fc_bsg_request { + uint32_t msgcode; + union { + struct fc_bsg_host_add_rport h_addrport; + struct fc_bsg_host_del_rport h_delrport; + struct fc_bsg_host_els h_els; + struct fc_bsg_host_ct h_ct; + struct fc_bsg_host_vendor h_vendor; + + struct fc_bsg_rport_els r_els; + struct fc_bsg_rport_ct r_ct; + } rqst_data; +}; + + +/* response (request sense data) structure of the sg_io_v4 */ +struct fc_bsg_reply { + /* + * The completion result. Result exists in two forms: + * if negative, it is an -Exxx system errno value. There will + * be no further reply information supplied. + * else, it's the 4-byte scsi error result, with driver, host, + * msg and status fields. The per-msgcode reply structure + * will contain valid data. + */ + uint32_t result; + + /* If there was reply_payload, how much was recevied ? */ + uint32_t reply_payload_rcv_len; + + union { + struct fc_bsg_host_vendor_reply vendor_reply; + + struct fc_bsg_ctels_reply ctels_reply; + } reply_data; +}; + + +#endif /* SCSI_BSG_FC_H */ + diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index d123ca84e73..b62a097b3ec 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -478,6 +478,15 @@ struct scsi_host_template { * module_init/module_exit. */ struct list_head legacy_hosts; + + /* + * Vendor Identifier associated with the host + * + * Note: When specifying vendor_id, be sure to read the + * Vendor Type and ID formatting requirements specified in + * scsi_netlink.h + */ + u64 vendor_id; }; /* diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 68a8d873bbd..fc50bd64aa4 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -33,7 +33,6 @@ struct scsi_transport_template; - /* * FC Port definitions - Following FC HBAAPI guidelines * @@ -352,6 +351,7 @@ struct fc_rport { /* aka fc_starget_attrs */ struct delayed_work fail_io_work; struct work_struct stgt_delete_work; struct work_struct rport_delete_work; + struct request_queue *rqst_q; /* bsg support */ } __attribute__((aligned(sizeof(unsigned long)))); /* bit field values for struct fc_rport "flags" field: */ @@ -514,6 +514,9 @@ struct fc_host_attrs { struct workqueue_struct *work_q; char devloss_work_q_name[20]; struct workqueue_struct *devloss_work_q; + + /* bsg support */ + struct request_queue *rqst_q; }; #define shost_to_fc_host(x) \ @@ -579,6 +582,47 @@ struct fc_host_attrs { (((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q) +struct fc_bsg_buffer { + unsigned int payload_len; + int sg_cnt; + struct scatterlist *sg_list; +}; + +/* Values for fc_bsg_job->state_flags (bitflags) */ +#define FC_RQST_STATE_INPROGRESS 0 +#define FC_RQST_STATE_DONE 1 + +struct fc_bsg_job { + struct Scsi_Host *shost; + struct fc_rport *rport; + struct device *dev; + struct request *req; + spinlock_t job_lock; + unsigned int state_flags; + unsigned int ref_cnt; + void (*job_done)(struct fc_bsg_job *); + + struct fc_bsg_request *request; + struct fc_bsg_reply *reply; + unsigned int request_len; + unsigned int reply_len; + /* + * On entry : reply_len indicates the buffer size allocated for + * the reply. + * + * Upon completion : the message handler must set reply_len + * to indicates the size of the reply to be returned to the + * caller. + */ + + /* DMA payloads for the request/response */ + struct fc_bsg_buffer request_payload; + struct fc_bsg_buffer reply_payload; + + void *dd_data; /* Used for driver-specific storage */ +}; + + /* The functions by which the transport class and the driver communicate */ struct fc_function_template { void (*get_rport_dev_loss_tmo)(struct fc_rport *); @@ -614,9 +658,14 @@ struct fc_function_template { int (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int); int (* it_nexus_response)(struct Scsi_Host *, u64, int); + /* bsg support */ + int (*bsg_request)(struct fc_bsg_job *); + int (*bsg_timeout)(struct fc_bsg_job *); + /* allocation lengths for host-specific data */ u32 dd_fcrport_size; u32 dd_fcvport_size; + u32 dd_bsg_size; /* * The driver sets these to tell the transport class it @@ -737,7 +786,6 @@ fc_vport_set_state(struct fc_vport *vport, enum fc_vport_state new_state) vport->vport_state = new_state; } - struct scsi_transport_template *fc_attach_transport( struct fc_function_template *); void fc_release_transport(struct scsi_transport_template *); |