diff options
Diffstat (limited to 'include')
25 files changed, 319 insertions, 258 deletions
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h new file mode 100644 index 00000000000..1ed66eaaf83 --- /dev/null +++ b/include/asm-arm/arch-at91/at91_adc.h @@ -0,0 +1,61 @@ +/* + * include/asm-arm/arch-at91/at91_adc.h + * + * Copyright (C) SAN People + * + * Analog-to-Digital Converter (ADC) registers. + * Based on AT91SAM9260 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_ADC_H +#define AT91_ADC_H + +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 7b9903c2c44..7a34a5b1fed 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -62,7 +62,7 @@ struct at91_mmc_data { }; extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* Ethernet */ + /* Ethernet (EMAC & MACB) */ struct at91_eth_data { u8 phy_irq_pin; /* PHY IRQ */ u8 is_rmii; /* using RMII interface? */ @@ -114,6 +114,16 @@ struct atmel_uart_data { }; extern void __init at91_add_device_serial(void); + /* LCD Controller */ +struct atmel_lcdfb_info; +extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); + + /* AC97 */ +struct atmel_ac97_data { + u8 reset_pin; /* reset */ +} +extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + /* LEDs */ extern u8 at91_leds_cpu; extern u8 at91_leds_timer; diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index e56a4e247d6..de6494a4dc6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -477,122 +477,4 @@ #define LCDISR_EOF (1<<1) #define LCDISR_BOF (1<<0) -/* - * UART Module. Takes the UART base address as argument - */ -#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */ -#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */ -#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */ -#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */ -#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */ -#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */ -#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */ -#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */ -#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */ -#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */ -#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */ -#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */ -#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */ -#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */ -#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */ -#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */ -#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */ -#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */ -#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */ -#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */ -#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */ -#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */ -#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - #endif // _IMX_REGS_H diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h index d26b755a987..85707e9c332 100644 --- a/include/asm-arm/arch-iop13xx/iop13xx.h +++ b/include/asm-arm/arch-iop13xx/iop13xx.h @@ -8,6 +8,7 @@ extern u32 iop13xx_atue_pmmr_offset; void iop13xx_init_irq(void); void iop13xx_map_io(void); void iop13xx_platform_init(void); +void iop13xx_add_tpmi_devices(void); void iop13xx_init_irq(void); /* CPUID CP6 R0 Page 0 */ @@ -27,19 +28,24 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE /* PCI MAP - * 0x0000.0000 - 0x8000.0000 1:1 mapping with Physical RAM - * 0x8000.0000 - 0x8800.0000 PCIX/PCIE memory window (128MB) -*/ + * bus range cpu phys cpu virt note + * 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM + * 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window + * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window + * + * IO MAP + * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window + * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window + */ #define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL #define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL -#define IOP13XX_PCIX_LOWER_IO_BA 0x0fff0000UL +#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ +#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL #define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ IOP13XX_PCIX_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_OFFSET (IOP13XX_PCIX_LOWER_IO_VA -\ - IOP13XX_PCIX_LOWER_IO_BA) #define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ (IOP13XX_PCIX_LOWER_IO_PA\ - IOP13XX_PCIX_LOWER_IO_VA)) @@ -65,15 +71,14 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL #define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0fff0000UL +#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ +#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL #define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) #define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_OFFSET (IOP13XX_PCIE_LOWER_IO_VA -\ - IOP13XX_PCIE_LOWER_IO_BA) #define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ (IOP13XX_PCIE_LOWER_IO_PA\ - IOP13XX_PCIE_LOWER_IO_VA)) @@ -451,4 +456,5 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10) #define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14) +#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180) #endif /* _IOP13XX_HW_H_ */ diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h index 77a837a02de..49213d9d7ca 100644 --- a/include/asm-arm/arch-iop13xx/time.h +++ b/include/asm-arm/arch-iop13xx/time.h @@ -7,9 +7,65 @@ #define IOP_TMR_PRIVILEGED 0x08 #define IOP_TMR_RATIO_1_1 0x00 +#define IOP13XX_XSI_FREQ_RATIO_MASK (3 << 19) +#define IOP13XX_XSI_FREQ_RATIO_2 (0 << 19) +#define IOP13XX_XSI_FREQ_RATIO_3 (1 << 19) +#define IOP13XX_XSI_FREQ_RATIO_4 (2 << 19) +#define IOP13XX_CORE_FREQ_MASK (7 << 16) +#define IOP13XX_CORE_FREQ_600 (0 << 16) +#define IOP13XX_CORE_FREQ_667 (1 << 16) +#define IOP13XX_CORE_FREQ_800 (2 << 16) +#define IOP13XX_CORE_FREQ_933 (3 << 16) +#define IOP13XX_CORE_FREQ_1000 (4 << 16) +#define IOP13XX_CORE_FREQ_1200 (5 << 16) + void iop_init_time(unsigned long tickrate); unsigned long iop_gettimeoffset(void); +static inline unsigned long iop13xx_core_freq(void) +{ + unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ); + freq &= IOP13XX_CORE_FREQ_MASK; + switch (freq) { + case IOP13XX_CORE_FREQ_600: + return 600000000; + case IOP13XX_CORE_FREQ_667: + return 667000000; + case IOP13XX_CORE_FREQ_800: + return 800000000; + case IOP13XX_CORE_FREQ_933: + return 933000000; + case IOP13XX_CORE_FREQ_1000: + return 1000000000; + case IOP13XX_CORE_FREQ_1200: + return 1200000000; + default: + printk("%s: warning unknown frequency, defaulting to 800Mhz\n", + __FUNCTION__); + } + + return 800000000; +} + +static inline unsigned long iop13xx_xsi_bus_ratio(void) +{ + unsigned long ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ); + ratio &= IOP13XX_XSI_FREQ_RATIO_MASK; + switch (ratio) { + case IOP13XX_XSI_FREQ_RATIO_2: + return 2; + case IOP13XX_XSI_FREQ_RATIO_3: + return 3; + case IOP13XX_XSI_FREQ_RATIO_4: + return 4; + default: + printk("%s: warning unknown ratio, defaulting to 2\n", + __FUNCTION__); + } + + return 2; +} + static inline void write_tmr0(u32 val) { asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val)); diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h index 2e9469047eb..0d8af57221a 100644 --- a/include/asm-arm/arch-iop32x/iop32x.h +++ b/include/asm-arm/arch-iop32x/iop32x.h @@ -24,5 +24,14 @@ #include <asm/hardware/iop3xx.h> +/* ATU Parameters + * set up a 1:1 bus to physical ram relationship + * w/ physical ram on top of pci in the memory map + */ +#define IOP32X_MAX_RAM_SIZE 0x40000000UL +#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE +#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000 +#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE #endif diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index 764cd3f0d41..c51072af214 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) +#define __virt_to_bus(x) (__virt_to_phys(x)) +#define __bus_to_virt(x) (__phys_to_virt(x)) #endif diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h index 7ac6e93db5f..766985b9a72 100644 --- a/include/asm-arm/arch-iop33x/iop33x.h +++ b/include/asm-arm/arch-iop33x/iop33x.h @@ -29,5 +29,15 @@ #define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740) #define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740) +/* ATU Parameters + * set up a 1:1 bus to physical ram relationship + * w/ pci on top of physical ram in memory map + */ +#define IOP33X_MAX_RAM_SIZE 0x80000000UL +#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE +#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE) +#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE + #endif diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index 0d39139b241..c8749127d6a 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) +#define __virt_to_bus(x) (__virt_to_phys(x)) +#define __bus_to_virt(x) (__phys_to_virt(x)) #endif diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h index 8ab45bea83c..fc9aa21f360 100644 --- a/include/asm-arm/arch-netx/netx-regs.h +++ b/include/asm-arm/arch-netx/netx-regs.h @@ -121,8 +121,8 @@ #define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) /* FIXME: Docs are not consistent */ -#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) -/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) */ +/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */ +#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) #define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) #define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h index 91dc8fb1027..716f34fdb71 100644 --- a/include/asm-arm/arch-ns9xxx/board.h +++ b/include/asm-arm/arch-ns9xxx/board.h @@ -15,4 +15,6 @@ #define board_is_a9m9750dev() (machine_is_cc9p9360dev()) +#define board_is_jscc9p9360() (machine_is_cc9p9360js()) + #endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h index a7c5ab3d901..bf30cbdcc2b 100644 --- a/include/asm-arm/arch-ns9xxx/clock.h +++ b/include/asm-arm/arch-ns9xxx/clock.h @@ -11,13 +11,43 @@ #ifndef __ASM_ARCH_CLOCK_H #define __ASM_ARCH_CLOCK_H +#include <asm/arch-ns9xxx/regs-sys.h> + +#define CRYSTAL 29491200 /* Hz */ + +/* The HRM calls this value f_vco */ static inline u32 ns9xxx_systemclock(void) __attribute__((const)); static inline u32 ns9xxx_systemclock(void) { + u32 pll = SYS_PLL; + /* - * This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c) + * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in + * time.c). + * + * The following values are given: + * - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6} + * - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2 + * - ND in {0 .. 31} + * - FS in {0 .. 3} + * + * Assuming the worst, we consider: + * - TIMERCLOCKSELECT == 64 + * - ND == 0 + * - FS == 3 + * + * So HZ should be a divisor of: + * (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT + * == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64 + * == 2^8 * 3^2 * 5^2 + * == 57600 + * + * Currently HZ is defined to be 100 for this platform. + * + * Fine. */ - return 353894400; + return CRYSTAL * (REGGET(pll, SYS_PLL, ND) + 1) + >> REGGET(pll, SYS_PLL, FS); } static inline u32 ns9xxx_cpuclock(void) __attribute__((const)); diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h index 6819da7c48d..25600554c4f 100644 --- a/include/asm-arm/arch-ns9xxx/hardware.h +++ b/include/asm-arm/arch-ns9xxx/hardware.h @@ -51,8 +51,9 @@ ~(__REGVAL(reg ## _ ## field, value)))) \ | (__REGVAL(reg ## _ ## field, value)))) -# define REGGET(reg, field) \ - ((reg & (reg ## _ ## field)) / (field & (-field))) +# define REGGET(var, reg, field) \ + ((var & (reg ## _ ## field)) / \ + ((reg ## _ ## field) & (-(reg ## _ ## field)))) #else diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index 716c106ac0b..223e51b8e10 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -13,6 +13,7 @@ #include <asm/mach-types.h> -#define processor_is_ns9360() (machine_is_cc9p9360dev()) +#define processor_is_ns9360() (machine_is_cc9p9360dev() \ + || machine_is_cc9p9360js()) #endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h index 8162a50bb27..a42546aeb92 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys.h @@ -48,6 +48,12 @@ /* PLL Configuration register */ #define SYS_PLL __REG(0xa0900188) +/* PLL FS status */ +#define SYS_PLL_FS __REGBITS(24, 23) + +/* PLL ND status */ +#define SYS_PLL_ND __REGBITS(20, 16) + /* PLL Configuration register: PLL SW change */ #define SYS_PLL_SWC __REGBIT(15) #define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h index 46ec2243974..e404b233d8a 100644 --- a/include/asm-arm/arch-pxa/i2c.h +++ b/include/asm-arm/arch-pxa/i2c.h @@ -64,6 +64,7 @@ struct i2c_slave_client; struct i2c_pxa_platform_data { unsigned int slave_addr; struct i2c_slave_client *slave; + unsigned int class; }; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 139c9d95481..dbcc9298b0c 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1801,35 +1801,35 @@ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ -#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ -#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ -#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ -#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ -#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ -#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ -#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ -#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ -#define CKEN10_ASSP (1 << 10) /* ASSP (SSP3) Clock Enable */ -#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ -#define CKEN9_OSTIMER (1 << 9) /* OS Timer Unit Clock Enable */ -#define CKEN9_NSSP (1 << 9) /* NSSP (SSP2) Clock Enable */ -#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ -#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ -#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ -#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ -#define CKEN4_HWUART (1 << 4) /* HWUART Unit Clock Enable */ -#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ -#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ -#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */ -#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ -#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ -#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ +#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ +#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ +#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ +#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ +#define CKEN_IM (20) /* Internal Memory Clock Enable */ +#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ +#define CKEN_USIM (18) /* USIM Unit Clock Enable */ +#define CKEN_MSL (17) /* MSL Unit Clock Enable */ +#define CKEN_LCD (16) /* LCD Unit Clock Enable */ +#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ +#define CKEN_I2C (14) /* I2C Unit Clock Enable */ +#define CKEN_FICP (13) /* FICP Unit Clock Enable */ +#define CKEN_MMC (12) /* MMC Unit Clock Enable */ +#define CKEN_USB (11) /* USB Unit Clock Enable */ +#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ +#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ +#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ +#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ +#define CKEN_I2S (8) /* I2S Unit Clock Enable */ +#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ +#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ +#define CKEN_STUART (5) /* STUART Unit Clock Enable */ +#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ +#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ +#define CKEN_SSP (3) /* SSP Unit Clock Enable */ +#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ +#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ +#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ +#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ diff --git a/include/asm-arm/arch-s3c2410/regs-ac97.h b/include/asm-arm/arch-s3c2410/regs-ac97.h index bdd6a4f93d7..b004dee6bca 100644 --- a/include/asm-arm/arch-s3c2410/regs-ac97.h +++ b/include/asm-arm/arch-s3c2410/regs-ac97.h @@ -13,11 +13,55 @@ #ifndef __ASM_ARCH_REGS_AC97_H #define __ASM_ARCH_REGS_AC97_H __FILE__ -#define S3C_AC97_GLBCTRL (0x00) -#define S3C_AC97_GLBSTAT (0x04) -#define S3C_AC97_CODEC_CMD (0x08) -#define S3C_AC97_PCM_ADDR (0x10) -#define S3C_AC97_PCM_DATA (0x18) -#define S3C_AC97_MIC_DATA (0x1C) +#define S3C_AC97_GLBCTRL (0x00) + +#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) +#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) +#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) +#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) +#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) +#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) +#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) +#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) +#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) +#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) +#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) +#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) +#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) +#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) +#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) +#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) +#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) + +#define S3C_AC97_GLBSTAT (0x04) + +#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) +#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) +#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) +#define S3C_AC97_GLBSTAT_MICINORI (1<<19) +#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) +#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) +#define S3C_AC97_GLBSTAT_MICINTI (1<<16) +#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) + +#define S3C_AC97_CODEC_CMD (0x08) + +#define S3C_AC97_CODEC_CMD_READ (1<<23) + +#define S3C_AC97_STAT (0x0c) +#define S3C_AC97_PCM_ADDR (0x10) +#define S3C_AC97_PCM_DATA (0x18) +#define S3C_AC97_MIC_DATA (0x1C) #endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h index 3c8354619b6..e1e9805d2d9 100644 --- a/include/asm-arm/arch-s3c2410/regs-udc.h +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -75,7 +75,7 @@ #define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) #define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) - +#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7) #define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W #define S3C2410_UDC_PWR_RESET (1<<3) // R @@ -135,10 +135,6 @@ #define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W #define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W -#define S3C2410_UDC_SETIX(base,x) \ - writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG); - - #define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) #define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) #define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h index a0ae2b954d2..3a6d3eb2762 100644 --- a/include/asm-arm/ecard.h +++ b/include/asm-arm/ecard.h @@ -160,6 +160,7 @@ struct expansion_card { unsigned char irqmask; /* IRQ mask */ unsigned char fiqmask; /* FIQ mask */ unsigned char claimed; /* Card claimed? */ + unsigned char easi; /* EASI card */ void *irq_data; /* Data for use for IRQ by card */ void *fiq_data; /* Data for use for FIQ by card */ @@ -169,7 +170,6 @@ struct expansion_card { CONST unsigned int dma; /* DMA number (for request_dma) */ CONST unsigned int irq; /* IRQ number (for request_irq) */ CONST unsigned int fiq; /* FIQ number (for request_irq) */ - CONST card_type_t type; /* Type of card */ CONST struct in_ecid cid; /* Card Identification */ /* Private internal data */ @@ -224,56 +224,6 @@ ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed) extern int ecard_request_resources(struct expansion_card *ec); extern void ecard_release_resources(struct expansion_card *ec); -#ifdef ECARD_C -/* Definitions internal to ecard.c - for it's use only!! - * - * External expansion card header as read from the card - */ -struct ex_ecid { - unsigned char r_irq:1; - unsigned char r_zero:1; - unsigned char r_fiq:1; - unsigned char r_id:4; - unsigned char r_a:1; - - unsigned char r_cd:1; - unsigned char r_is:1; - unsigned char r_w:2; - unsigned char r_r1:4; - - unsigned char r_r2:8; - - unsigned char r_prod[2]; - - unsigned char r_manu[2]; - - unsigned char r_country; - - unsigned char r_fiqmask; - unsigned char r_fiqoff[3]; - - unsigned char r_irqmask; - unsigned char r_irqoff[3]; -}; - -/* - * Chunk directory entry as read from the card - */ -struct ex_chunk_dir { - unsigned char r_id; - unsigned char r_len[3]; - unsigned long r_start; - union { - char string[256]; - char data[1]; - } d; -#define c_id(x) ((x)->r_id) -#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16)) -#define c_start(x) ((x)->r_start) -}; - -#endif - extern struct bus_type ecard_bus_type; #define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index 15141a9caca..63feceb7ede 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -28,6 +28,7 @@ extern void gpio_line_config(int line, int direction); extern int gpio_line_get(int line); extern void gpio_line_set(int line, int value); +extern int init_atu; #endif @@ -41,7 +42,7 @@ extern void gpio_line_set(int line, int value); IOP3XX_PERIPHERAL_SIZE - 1) #define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ IOP3XX_PERIPHERAL_SIZE - 1) -#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ +#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\ (IOP3XX_PERIPHERAL_PHYS_BASE\ - IOP3XX_PERIPHERAL_VIRT_BASE)) #define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) @@ -103,6 +104,21 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) #define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) #define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15) +#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14) +#define IOP3XX_ATUCR_OUT_EN (1 << 1) + +#define IOP3XX_INIT_ATU_DEFAULT 0 +#define IOP3XX_INIT_ATU_DISABLE -1 +#define IOP3XX_INIT_ATU_ENABLE 1 + +#ifdef CONFIG_IOP3XX_ATU +#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ + IOP3XX_INIT_ATU_ENABLE : init_atu) +#else +#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ + IOP3XX_INIT_ATU_DISABLE : init_atu) +#endif /* Messaging Unit */ #define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) @@ -253,14 +269,12 @@ extern void gpio_line_set(int line, int value); /* * IOP3XX I/O and Mem space regions for PCI autoconfiguration */ -#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x04000000 -#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 -#define IOP3XX_PCI_LOWER_MEM_BA (*IOP3XX_OMWTVR0) +#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 #define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 #define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR) +#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 #define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ IOP3XX_PCI_IO_WINDOW_SIZE - 1) #define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h index f6135dbb9fa..235b753cd87 100644 --- a/include/asm-arm/plat-s3c24xx/clock.h +++ b/include/asm-arm/plat-s3c24xx/clock.h @@ -56,6 +56,7 @@ extern struct mutex clocks_mutex; extern int s3c2410_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); +extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern int s3c24xx_setup_clocks(unsigned long xtal, unsigned long fclk, diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h index 15dd1881090..23e420e8bd5 100644 --- a/include/asm-arm/plat-s3c24xx/cpu.h +++ b/include/asm-arm/plat-s3c24xx/cpu.h @@ -40,22 +40,6 @@ extern void s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no); -/* the board structure is used at first initialsation time - * to get info such as the devices to register for this - * board. This is done because platfrom_add_devices() cannot - * be called from the map_io entry. -*/ - -struct s3c24xx_board { - struct platform_device **devices; - unsigned int devices_count; - - struct clk **clocks; - unsigned int clocks_count; -}; - -extern void s3c24xx_set_board(struct s3c24xx_board *board); - /* timer for 2410/2440 */ struct sys_timer; diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h index 5a8ef787dbf..2d0dad8c10a 100644 --- a/include/asm-arm/ptrace.h +++ b/include/asm-arm/ptrace.h @@ -10,23 +10,19 @@ #ifndef __ASM_ARM_PTRACE_H #define __ASM_ARM_PTRACE_H - #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 #define PTRACE_GETFPREGS 14 #define PTRACE_SETFPREGS 15 - +/* PTRACE_ATTACH is 16 */ +/* PTRACE_DETACH is 17 */ #define PTRACE_GETWMMXREGS 18 #define PTRACE_SETWMMXREGS 19 - +/* 20 is unused */ #define PTRACE_OLDSETOPTIONS 21 - #define PTRACE_GET_THREAD_AREA 22 - #define PTRACE_SET_SYSCALL 23 - /* PTRACE_SYSCALL is 24 */ - #define PTRACE_GETCRUNCHREGS 25 #define PTRACE_SETCRUNCHREGS 26 diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 5014794f9eb..eae85b09db2 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -57,6 +57,7 @@ struct thread_info { __u32 cpu; /* cpu */ __u32 cpu_domain; /* cpu domain */ struct cpu_context_save cpu_context; /* cpu context */ + __u32 syscall; /* syscall number */ __u8 used_cp[16]; /* thread used copro */ unsigned long tp_value; struct crunch_state crunchstate; |