diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ieee80211.h | 17 | ||||
| -rw-r--r-- | include/linux/if_frad.h | 1 | ||||
| -rw-r--r-- | include/linux/netdevice.h | 1 | ||||
| -rw-r--r-- | include/linux/netfilter/x_tables.h | 23 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 88 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 2 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 203 | ||||
| -rw-r--r-- | include/net/ethoc.h | 22 | ||||
| -rw-r--r-- | include/net/ieee80211_radiotap.h | 4 | ||||
| -rw-r--r-- | include/net/mac80211.h | 84 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack.h | 14 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack_helper.h | 2 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack_l3proto.h | 7 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack_l4proto.h | 7 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack_tuple.h | 6 | ||||
| -rw-r--r-- | include/net/netlink.h | 1 | ||||
| -rw-r--r-- | include/net/netns/conntrack.h | 5 |
17 files changed, 415 insertions, 72 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b1bb817d142..4b501b48ce8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -18,6 +18,22 @@ #include <linux/types.h> #include <asm/byteorder.h> +/* + * DS bit usage + * + * TA = transmitter address + * RA = receiver address + * DA = destination address + * SA = source address + * + * ToDS FromDS A1(RA) A2(TA) A3 A4 Use + * ----------------------------------------------------------------- + * 0 0 DA SA BSSID - IBSS/DLS + * 0 1 DA BSSID SA - AP -> STA + * 1 0 BSSID SA DA - AP <- STA + * 1 1 RA TA DA SA unspecified (WDS) + */ + #define FCS_LEN 4 #define IEEE80211_FCTL_VERS 0x0003 @@ -851,6 +867,7 @@ struct ieee80211_ht_info { /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 +#define WLAN_AUTH_FT 2 #define WLAN_AUTH_LEAP 128 #define WLAN_AUTH_CHALLENGE_LEN 128 diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 60e16a551dd..673f2209453 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -153,7 +153,6 @@ struct frhdr struct dlci_local { - struct net_device_stats stats; struct net_device *master; struct net_device *slave; struct dlci_conf config; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index be3ebd7e8ce..1b55952a17f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -32,6 +32,7 @@ #ifdef __KERNEL__ #include <linux/timer.h> #include <linux/delay.h> +#include <linux/mm.h> #include <asm/atomic.h> #include <asm/cache.h> #include <asm/byteorder.h> diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index adbc50a20ec..7b1a652066c 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -437,6 +437,29 @@ extern void xt_free_table_info(struct xt_table_info *info); extern void xt_table_entry_swap_rcu(struct xt_table_info *old, struct xt_table_info *new); +/* + * This helper is performance critical and must be inlined + */ +static inline unsigned long ifname_compare_aligned(const char *_a, + const char *_b, + const char *_mask) +{ + const unsigned long *a = (const unsigned long *)_a; + const unsigned long *b = (const unsigned long *)_b; + const unsigned long *mask = (const unsigned long *)_mask; + unsigned long ret; + + ret = (a[0] ^ b[0]) & mask[0]; + if (IFNAMSIZ > sizeof(unsigned long)) + ret |= (a[1] ^ b[1]) & mask[1]; + if (IFNAMSIZ > 2 * sizeof(unsigned long)) + ret |= (a[2] ^ b[2]) & mask[2]; + if (IFNAMSIZ > 3 * sizeof(unsigned long)) + ret |= (a[3] ^ b[3]) & mask[3]; + BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long)); + return ret; +} + #ifdef CONFIG_COMPAT #include <net/compat.h> diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index f33aa08dd9b..cbe8ce3bf48 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -142,6 +142,12 @@ * %NL80211_ATTR_IE. If the command succeeds, the requested data will be * added to all specified management frames generated by * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. * * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters @@ -161,6 +167,38 @@ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on * to (%NL80211_ATTR_REG_ALPHA2). * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -206,7 +244,7 @@ enum nl80211_commands { NL80211_CMD_GET_MESH_PARAMS, NL80211_CMD_SET_MESH_PARAMS, - NL80211_CMD_SET_MGMT_EXTRA_IE, + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, NL80211_CMD_GET_REG, @@ -217,6 +255,11 @@ enum nl80211_commands { NL80211_CMD_REG_CHANGE, + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -230,8 +273,11 @@ enum nl80211_commands { */ #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE - #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -349,6 +395,19 @@ enum nl80211_commands { * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -426,6 +485,13 @@ enum nl80211_attrs { NL80211_ATTR_REG_INITIATOR, NL80211_ATTR_REG_TYPE, + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -445,6 +511,10 @@ enum nl80211_attrs { #define NL80211_ATTR_IE NL80211_ATTR_IE #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -978,4 +1048,18 @@ enum nl80211_bss { NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 }; +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, +}; #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 097f410edef..05dfa7c4fb6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2271,6 +2271,8 @@ #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 #define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff +#define PCI_VENDOR_ID_QMI 0x1a32 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 50f3fd9ff52..5389afdc129 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -471,26 +471,6 @@ struct ieee80211_txq_params { u8 aifs; }; -/** - * struct mgmt_extra_ie_params - Extra management frame IE parameters - * - * Used to add extra IE(s) into management frames. If the driver cannot add the - * requested data into all management frames of the specified subtype that are - * generated in kernel or firmware/hardware, it must reject the configuration - * call. The IE data buffer is added to the end of the specified management - * frame body after all other IEs. This addition is not applied to frames that - * are injected through a monitor interface. - * - * @subtype: Management frame subtype - * @ies: IE data buffer or %NULL to remove previous data - * @ies_len: Length of @ies in octets - */ -struct mgmt_extra_ie_params { - u8 subtype; - u8 *ies; - int ies_len; -}; - /* from net/wireless.h */ struct wiphy; @@ -559,6 +539,7 @@ enum cfg80211_signal_type { * is no guarantee that these are well-formed!) * @len_information_elements: total length of the information elements * @signal: signal strength value (type depends on the wiphy's signal_type) + * @hold: BSS should not expire * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -579,6 +560,105 @@ struct cfg80211_bss { }; /** + * struct cfg80211_auth_request - Authentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * authentication. + * NOTE: This structure will likely change when more code from mac80211 is + * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. + * Before using this in a driver that does not use mac80211, it would be better + * to check the status of that work and better yet, volunteer to work on it. + * + * @chan: The channel to use or %NULL if not specified (auto-select based on + * scan results) + * @peer_addr: The address of the peer STA (AP BSSID in infrastructure case); + * this field is required to be present; if the driver wants to help with + * BSS selection, it should use (yet to be added) MLME event to allow user + * space SME to be notified of roaming candidate, so that the SME can then + * use the authentication request with the recommended BSSID and whatever + * other data may be needed for authentication/association + * @ssid: SSID or %NULL if not yet available + * @ssid_len: Length of ssid in octets + * @auth_type: Authentication type (algorithm) + * @ie: Extra IEs to add to Authentication frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_auth_request { + struct ieee80211_channel *chan; + u8 *peer_addr; + const u8 *ssid; + size_t ssid_len; + enum nl80211_auth_type auth_type; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_assoc_request - (Re)Association request data + * + * This structure provides information needed to complete IEEE 802.11 + * (re)association. + * NOTE: This structure will likely change when more code from mac80211 is + * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. + * Before using this in a driver that does not use mac80211, it would be better + * to check the status of that work and better yet, volunteer to work on it. + * + * @chan: The channel to use or %NULL if not specified (auto-select based on + * scan results) + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be in State 2 (authenticated) with the + * peer STA + * @ssid: SSID + * @ssid_len: Length of ssid in octets + * @ie: Extra IEs to add to (Re)Association Request frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_assoc_request { + struct ieee80211_channel *chan; + u8 *peer_addr; + const u8 *ssid; + size_t ssid_len; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_deauth_request - Deauthentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * deauthentication. + * + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be authenticated with the peer STA + * @ie: Extra IEs to add to Deauthentication frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_deauth_request { + u8 *peer_addr; + u16 reason_code; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_disassoc_request - Disassociation request data + * + * This structure provides information needed to complete IEEE 802.11 + * disassocation. + * + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be associated with the peer STA + * @ie: Extra IEs to add to Disassociation frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_disassoc_request { + u8 *peer_addr; + u16 reason_code; + const u8 *ie; + size_t ie_len; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -644,12 +724,15 @@ struct cfg80211_bss { * * @set_channel: Set channel * - * @set_mgmt_extra_ie: Set extra IE data for management frames - * * @scan: Request to do a scan. If returning zero, the scan request is given * the driver, and will be valid until passed to cfg80211_scan_done(). * For scan results, call cfg80211_inform_bss(); you can call this outside * the scan/scan_done bracket too. + * + * @auth: Request to authenticate with the specified peer + * @assoc: Request to (re)associate with the specified peer + * @deauth: Request to deauthenticate from the specified peer + * @disassoc: Request to disassociate from the specified peer */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -724,12 +807,17 @@ struct cfg80211_ops { struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); - int (*set_mgmt_extra_ie)(struct wiphy *wiphy, - struct net_device *dev, - struct mgmt_extra_ie_params *params); - int (*scan)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_scan_request *request); + + int (*auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_auth_request *req); + int (*assoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_assoc_request *req); + int (*deauth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_deauth_request *req); + int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_disassoc_request *req); }; /* temporary wext handlers */ @@ -807,4 +895,67 @@ void cfg80211_put_bss(struct cfg80211_bss *bss); */ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); +/** + * cfg80211_send_rx_auth - notification of processed authentication + * @dev: network device + * @buf: authentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever an authentication has been processed in + * station mode. + */ +void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_rx_assoc - notification of processed association + * @dev: network device + * @buf: (re)association response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a (re)association response has been + * processed in station mode. + */ +void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_rx_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever deauthentication has been processed in + * station mode. + */ +void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_send_rx_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever disassociation has been processed in + * station mode. + */ +void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_hold_bss - exclude bss from expiration + * @bss: bss which should not expire + * + * In a case when the BSS is not updated but it shouldn't expire this + * function can be used to mark the BSS to be excluded from expiration. + */ +void cfg80211_hold_bss(struct cfg80211_bss *bss); + +/** + * cfg80211_unhold_bss - remove expiration exception from the BSS + * @bss: bss which can expire again + * + * This function marks the BSS to be expirable again. + */ +void cfg80211_unhold_bss(struct cfg80211_bss *bss); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/ethoc.h b/include/net/ethoc.h new file mode 100644 index 00000000000..96f3789b27b --- /dev/null +++ b/include/net/ethoc.h @@ -0,0 +1,22 @@ +/* + * linux/include/net/ethoc.h + * + * Copyright (C) 2008-2009 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Written by Thierry Reding <thierry.reding@avionic-design.de> + */ + +#ifndef LINUX_NET_ETHOC_H +#define LINUX_NET_ETHOC_H 1 + +struct ethoc_platform_data { + u8 hwaddr[IFHWADDRLEN]; + s8 phy_id; +}; + +#endif /* !LINUX_NET_ETHOC_H */ + diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index 384698cb773..23c3f3d9777 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -230,8 +230,10 @@ enum ieee80211_radiotap_type { * 802.11 header and payload * (to 32-bit boundary) */ +#define IEEE80211_RADIOTAP_F_BADFCS 0x40 /* bad FCS */ + /* For IEEE80211_RADIOTAP_RX_FLAGS */ -#define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */ +#define IEEE80211_RADIOTAP_F_RX_BADPLCP 0x0002 /* frame has bad PLCP */ /* For IEEE80211_RADIOTAP_TX_FLAGS */ #define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 12a52efcd0d..3b83a80e3fe 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -93,12 +93,9 @@ struct ieee80211_ht_bss_info { * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. - * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable - * for A-MPDU operation. */ enum ieee80211_max_queues { - IEEE80211_MAX_QUEUES = 16, - IEEE80211_MAX_AMPDU_QUEUES = 16, + IEEE80211_MAX_QUEUES = 4, }; /** @@ -245,6 +242,12 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or + * set this flag in the driver; indicates that the rate control + * algorithm was used and should be notified of TX status + * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, + * used to indicate that a pending frame requires TX processing before + * it can be sent out. */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -260,6 +263,8 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + IEEE80211_TX_INTFL_RCALGO = BIT(13), + IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), }; /** @@ -520,12 +525,6 @@ enum ieee80211_conf_flags { IEEE80211_CONF_PS = (1<<1), }; -/* XXX: remove all this once drivers stop trying to use it */ -static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) -{ - return 0; -} -#define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) /** * enum ieee80211_conf_changed - denotes which configuration changed @@ -888,6 +887,10 @@ enum ieee80211_tkip_key_type { * * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). + * + * @IEEE80211_HW_BEACON_FILTER: + * Hardware supports dropping of irrelevant beacon frames to + * avoid waking up cpu. */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -903,6 +906,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, + IEEE80211_HW_BEACON_FILTER = 1<<14, }; /** @@ -945,12 +949,6 @@ enum ieee80211_hw_flags { * data packets. WMM/QoS requires at least four, these * queues need to have configurable access parameters. * - * @ampdu_queues: number of available hardware transmit queues - * for A-MPDU packets, these have no access parameters - * because they're used only for A-MPDU frames. Note that - * mac80211 will not currently use any of the regular queues - * for aggregation. - * * @rate_control_algorithm: rate control algorithm for this hardware. * If unset (NULL), the default algorithm will be used. Must be * set before calling ieee80211_register_hw(). @@ -975,7 +973,6 @@ struct ieee80211_hw { int vif_data_size; int sta_data_size; u16 queues; - u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; u8 max_rates; @@ -1017,11 +1014,6 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } -static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) -{ - return hw->queues; -} - static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) @@ -1132,6 +1124,24 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, */ /** + * DOC: Beacon filter support + * + * Some hardware have beacon filter support to reduce host cpu wakeups + * which will reduce system power consumption. It usuallly works so that + * the firmware creates a checksum of the beacon but omits all constantly + * changing elements (TSF, TIM etc). Whenever the checksum changes the + * beacon is forwarded to the host, otherwise it will be just dropped. That + * way the host will only receive beacons where some relevant information + * (for example ERP protection or WMM settings) have changed. + * + * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag. + * The driver needs to enable beacon filter support whenever power save is + * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled, + * the stack will not check for beacon miss at all and the driver needs to + * notify about complete loss of beacons with ieee80211_beacon_loss(). + */ + +/** * DOC: Frame filtering * * mac80211 requires to see many management frames for proper @@ -1220,14 +1230,14 @@ enum ieee80211_filter_flags { * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation * @IEEE80211_AMPDU_TX_START: start Tx aggregation * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation - * @IEEE80211_AMPDU_TX_RESUME: resume TX aggregation + * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational */ enum ieee80211_ampdu_mlme_action { IEEE80211_AMPDU_RX_START, IEEE80211_AMPDU_RX_STOP, IEEE80211_AMPDU_TX_START, IEEE80211_AMPDU_TX_STOP, - IEEE80211_AMPDU_TX_RESUME, + IEEE80211_AMPDU_TX_OPERATIONAL, }; /** @@ -1318,11 +1328,13 @@ enum ieee80211_ampdu_mlme_action { * * @hw_scan: Ask the hardware to service the scan request, no need to start * the scan state machine in stack. The scan must honour the channel - * configuration done by the regulatory agent in the wiphy's registered - * bands. When the scan finishes, ieee80211_scan_completed() must be - * called; note that it also must be called when the scan cannot finish - * because the hardware is turned off! Anything else is a bug! - * Returns a negative error code which will be seen in userspace. + * configuration done by the regulatory agent in the wiphy's + * registered bands. The hardware (or the driver) needs to make sure + * that power save is disabled. When the scan finishes, + * ieee80211_scan_completed() must be called; note that it also must + * be called when the scan cannot finish because the hardware is + * turned off! Anything else is a bug! Returns a negative error code + * which will be seen in userspace. * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. @@ -1350,8 +1362,8 @@ enum ieee80211_ampdu_mlme_action { * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue * size (limit), and total number of packets sent using each TX queue - * (count). The 'stats' pointer points to an array that has hw->queues + - * hw->ampdu_queues items. + * (count). The 'stats' pointer points to an array that has hw->queues + * items. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, * this is only used for IBSS mode BSSID merging and debugging. Is not a @@ -1979,6 +1991,16 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, const u8 *addr); +/** + * ieee80211_beacon_loss - inform hardware does not receive beacons + * + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * + * When beacon filtering is enabled with IEEE80211_HW_BEACON_FILTERING and + * IEEE80211_CONF_PS is set, the driver needs to inform whenever the + * hardware is not receiving beacons with this function. + */ +void ieee80211_beacon_loss(struct ieee80211_vif *vif); /* Rate control API */ diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 4dfb793c3f1..6c3f964de9e 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -91,8 +91,7 @@ struct nf_conn_help { #include <net/netfilter/ipv4/nf_conntrack_ipv4.h> #include <net/netfilter/ipv6/nf_conntrack_ipv6.h> -struct nf_conn -{ +struct nf_conn { /* Usage count in here is 1 for hash table/destruct timer, 1 per skb, plus 1 for any connection(s) we are `master' for */ struct nf_conntrack ct_general; @@ -126,7 +125,6 @@ struct nf_conn #ifdef CONFIG_NET_NS struct net *ct_net; #endif - struct rcu_head rcu; }; static inline struct nf_conn * @@ -190,9 +188,13 @@ static inline void nf_ct_put(struct nf_conn *ct) extern int nf_ct_l3proto_try_module_get(unsigned short l3proto); extern void nf_ct_l3proto_module_put(unsigned short l3proto); -extern struct hlist_head *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced); -extern void nf_ct_free_hashtable(struct hlist_head *hash, int vmalloced, - unsigned int size); +/* + * Allocate a hashtable of hlist_head (if nulls == 0), + * or hlist_nulls_head (if nulls == 1) + */ +extern void *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced, int nulls); + +extern void nf_ct_free_hashtable(void *hash, int vmalloced, unsigned int size); extern struct nf_conntrack_tuple_hash * __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple); diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h index 66d65a7caa3..ee2a4b369a0 100644 --- a/include/net/netfilter/nf_conntrack_helper.h +++ b/include/net/netfilter/nf_conntrack_helper.h @@ -14,6 +14,8 @@ struct module; +#define NF_CT_HELPER_NAME_LEN 16 + struct nf_conntrack_helper { struct hlist_node hnode; /* Internal use. */ diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h index 0378676c3dd..9f99d36d5de 100644 --- a/include/net/netfilter/nf_conntrack_l3proto.h +++ b/include/net/netfilter/nf_conntrack_l3proto.h @@ -53,10 +53,17 @@ struct nf_conntrack_l3proto int (*tuple_to_nlattr)(struct sk_buff *skb, const struct nf_conntrack_tuple *t); + /* + * Calculate size of tuple nlattr + */ + int (*nlattr_tuple_size)(void); + int (*nlattr_to_tuple)(struct nlattr *tb[], struct nf_conntrack_tuple *t); const struct nla_policy *nla_policy; + size_t nla_size; + #ifdef CONFIG_SYSCTL struct ctl_table_header *ctl_table_header; struct ctl_path *ctl_table_path; diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h index b01070bf2f8..ba32ed7bdab 100644 --- a/include/net/netfilter/nf_conntrack_l4proto.h +++ b/include/net/netfilter/nf_conntrack_l4proto.h @@ -64,16 +64,22 @@ struct nf_conntrack_l4proto /* convert protoinfo to nfnetink attributes */ int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla, const struct nf_conn *ct); + /* Calculate protoinfo nlattr size */ + int (*nlattr_size)(void); /* convert nfnetlink attributes to protoinfo */ int (*from_nlattr)(struct nlattr *tb[], struct nf_conn *ct); int (*tuple_to_nlattr)(struct sk_buff *skb, const struct nf_conntrack_tuple *t); + /* Calculate tuple nlattr size */ + int (*nlattr_tuple_size)(void); int (*nlattr_to_tuple)(struct nlattr *tb[], struct nf_conntrack_tuple *t); const struct nla_policy *nla_policy; + size_t nla_size; + #ifdef CONFIG_SYSCTL struct ctl_table_header **ctl_table_header; struct ctl_table *ctl_table; @@ -107,6 +113,7 @@ extern int nf_ct_port_tuple_to_nlattr(struct sk_buff *skb, const struct nf_conntrack_tuple *tuple); extern int nf_ct_port_nlattr_to_tuple(struct nlattr *tb[], struct nf_conntrack_tuple *t); +extern int nf_ct_port_nlattr_tuple_size(void); extern const struct nla_policy nf_ct_port_nla_policy[]; #ifdef CONFIG_SYSCTL diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h index f2f6aa73dc1..2628c154d40 100644 --- a/include/net/netfilter/nf_conntrack_tuple.h +++ b/include/net/netfilter/nf_conntrack_tuple.h @@ -12,6 +12,7 @@ #include <linux/netfilter/x_tables.h> #include <linux/netfilter/nf_conntrack_tuple_common.h> +#include <linux/list_nulls.h> /* A `tuple' is a structure containing the information to uniquely identify a connection. ie. if two packets have the same tuple, they @@ -146,9 +147,8 @@ static inline void nf_ct_dump_tuple(const struct nf_conntrack_tuple *t) ((enum ip_conntrack_dir)(h)->tuple.dst.dir) /* Connections have two entries in the hash table: one for each way */ -struct nf_conntrack_tuple_hash -{ - struct hlist_node hnode; +struct nf_conntrack_tuple_hash { + struct hlist_nulls_node hnnode; struct nf_conntrack_tuple tuple; }; diff --git a/include/net/netlink.h b/include/net/netlink.h index 8a6150a3f4c..eddb50289d6 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -230,6 +230,7 @@ extern int nla_validate(struct nlattr *head, int len, int maxtype, extern int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len, const struct nla_policy *policy); +extern int nla_policy_len(const struct nla_policy *, int); extern struct nlattr * nla_find(struct nlattr *head, int len, int attrtype); extern size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize); diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index f4498a62881..9dc58402bc0 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -2,6 +2,7 @@ #define __NETNS_CONNTRACK_H #include <linux/list.h> +#include <linux/list_nulls.h> #include <asm/atomic.h> struct ctl_table_header; @@ -10,9 +11,9 @@ struct nf_conntrack_ecache; struct netns_ct { atomic_t count; unsigned int expect_count; - struct hlist_head *hash; + struct hlist_nulls_head *hash; struct hlist_head *expect_hash; - struct hlist_head unconfirmed; + struct hlist_nulls_head unconfirmed; struct ip_conntrack_stat *stat; #ifdef CONFIG_NF_CONNTRACK_EVENTS struct nf_conntrack_ecache *ecache; |