aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/Kbuild1
-rw-r--r--include/acpi/acconfig.h2
-rw-r--r--include/acpi/acdisasm.h1
-rw-r--r--include/acpi/acdispat.h2
-rw-r--r--include/acpi/acexcep.h10
-rw-r--r--include/acpi/acglobal.h2
-rw-r--r--include/acpi/achware.h4
-rw-r--r--include/acpi/acinterp.h5
-rw-r--r--include/acpi/aclocal.h6
-rw-r--r--include/acpi/acmacros.h38
-rw-r--r--include/acpi/acnamesp.h30
-rw-r--r--include/acpi/acpi_bus.h12
-rw-r--r--include/acpi/acpi_drivers.h4
-rw-r--r--include/acpi/acpiosxf.h2
-rw-r--r--include/acpi/acpixf.h12
-rw-r--r--include/acpi/acstruct.h10
-rw-r--r--include/acpi/actables.h27
-rw-r--r--include/acpi/actbl1.h23
-rw-r--r--include/acpi/actypes.h16
-rw-r--r--include/acpi/acutils.h70
-rw-r--r--include/acpi/processor.h2
-rw-r--r--include/acpi/reboot.h14
-rw-r--r--include/asm-alpha/smp.h5
-rw-r--r--include/asm-arm/arch-at91/at91_mci.h4
-rw-r--r--include/asm-arm/arch-at91/at91_pmc.h7
-rw-r--r--include/asm-arm/arch-at91/at91cap9.h2
-rw-r--r--include/asm-arm/arch-at91/at91cap9_matrix.h5
-rw-r--r--include/asm-arm/arch-at91/at91sam9260.h11
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl.h2
-rw-r--r--include/asm-arm/arch-at91/board.h6
-rw-r--r--include/asm-arm/arch-at91/cpu.h7
-rw-r--r--include/asm-arm/arch-at91/hardware.h2
-rw-r--r--include/asm-arm/arch-at91/timex.h22
-rw-r--r--include/asm-arm/arch-ebsa285/hardware.h26
-rw-r--r--include/asm-arm/arch-ebsa285/memory.h19
-rw-r--r--include/asm-arm/arch-ebsa285/vmalloc.h4
-rw-r--r--include/asm-arm/arch-imx/hardware.h8
-rw-r--r--include/asm-arm/arch-imx/imx-dma.h2
-rw-r--r--include/asm-arm/arch-imx/imx-uart.h2
-rw-r--r--include/asm-arm/arch-iop13xx/dma.h2
-rw-r--r--include/asm-arm/arch-iop32x/gpio.h6
-rw-r--r--include/asm-arm/arch-iop33x/gpio.h6
-rw-r--r--include/asm-arm/arch-ixp4xx/fsg.h50
-rw-r--r--include/asm-arm/arch-ixp4xx/hardware.h1
-rw-r--r--include/asm-arm/arch-ixp4xx/irqs.h7
-rw-r--r--include/asm-arm/arch-kirkwood/debug-macro.S20
-rw-r--r--include/asm-arm/arch-kirkwood/dma.h1
-rw-r--r--include/asm-arm/arch-kirkwood/entry-macro.S40
-rw-r--r--include/asm-arm/arch-kirkwood/hardware.h21
-rw-r--r--include/asm-arm/arch-kirkwood/io.h26
-rw-r--r--include/asm-arm/arch-kirkwood/irqs.h63
-rw-r--r--include/asm-arm/arch-kirkwood/kirkwood.h100
-rw-r--r--include/asm-arm/arch-kirkwood/memory.h14
-rw-r--r--include/asm-arm/arch-kirkwood/system.h37
-rw-r--r--include/asm-arm/arch-kirkwood/timex.h11
-rw-r--r--include/asm-arm/arch-kirkwood/uncompress.h47
-rw-r--r--include/asm-arm/arch-kirkwood/vmalloc.h5
-rw-r--r--include/asm-arm/arch-loki/debug-macro.S20
-rw-r--r--include/asm-arm/arch-loki/dma.h1
-rw-r--r--include/asm-arm/arch-loki/entry-macro.S30
-rw-r--r--include/asm-arm/arch-loki/hardware.h15
-rw-r--r--include/asm-arm/arch-loki/io.h26
-rw-r--r--include/asm-arm/arch-loki/irqs.h58
-rw-r--r--include/asm-arm/arch-loki/loki.h97
-rw-r--r--include/asm-arm/arch-loki/memory.h14
-rw-r--r--include/asm-arm/arch-loki/system.h37
-rw-r--r--include/asm-arm/arch-loki/timex.h11
-rw-r--r--include/asm-arm/arch-loki/uncompress.h47
-rw-r--r--include/asm-arm/arch-loki/vmalloc.h5
-rw-r--r--include/asm-arm/arch-msm/irqs.h1
-rw-r--r--include/asm-arm/arch-msm/timex.h1
-rw-r--r--include/asm-arm/arch-mv78xx0/debug-macro.S20
-rw-r--r--include/asm-arm/arch-mv78xx0/dma.h1
-rw-r--r--include/asm-arm/arch-mv78xx0/entry-macro.S39
-rw-r--r--include/asm-arm/arch-mv78xx0/hardware.h21
-rw-r--r--include/asm-arm/arch-mv78xx0/io.h26
-rw-r--r--include/asm-arm/arch-mv78xx0/irqs.h91
-rw-r--r--include/asm-arm/arch-mv78xx0/memory.h14
-rw-r--r--include/asm-arm/arch-mv78xx0/mv78xx0.h126
-rw-r--r--include/asm-arm/arch-mv78xx0/system.h37
-rw-r--r--include/asm-arm/arch-mv78xx0/timex.h9
-rw-r--r--include/asm-arm/arch-mv78xx0/uncompress.h47
-rw-r--r--include/asm-arm/arch-mv78xx0/vmalloc.h5
-rw-r--r--include/asm-arm/arch-mxc/board-mx27ads.h354
-rw-r--r--include/asm-arm/arch-mxc/board-mx31ads.h5
-rw-r--r--include/asm-arm/arch-mxc/board-mx31lite.h38
-rw-r--r--include/asm-arm/arch-mxc/board-pcm037.h27
-rw-r--r--include/asm-arm/arch-mxc/board-pcm038.h41
-rw-r--r--include/asm-arm/arch-mxc/clock.h67
-rw-r--r--include/asm-arm/arch-mxc/common.h6
-rw-r--r--include/asm-arm/arch-mxc/debug-macro.S49
-rw-r--r--include/asm-arm/arch-mxc/gpio.h42
-rw-r--r--include/asm-arm/arch-mxc/hardware.h38
-rw-r--r--include/asm-arm/arch-mxc/iim.h77
-rw-r--r--include/asm-arm/arch-mxc/imx-uart.h32
-rw-r--r--include/asm-arm/arch-mxc/iomux-mx1-mx2.h372
-rw-r--r--include/asm-arm/arch-mxc/iomux-mx3.h501
-rw-r--r--include/asm-arm/arch-mxc/irqs.h13
-rw-r--r--include/asm-arm/arch-mxc/mx27.h302
-rw-r--r--include/asm-arm/arch-mxc/mx31.h21
-rw-r--r--include/asm-arm/arch-mxc/mxc.h152
-rw-r--r--include/asm-arm/arch-mxc/mxc_timer.h158
-rw-r--r--include/asm-arm/arch-ns9xxx/hardware.h4
-rw-r--r--include/asm-arm/arch-omap/board-2430sdp.h5
-rw-r--r--include/asm-arm/arch-omap/board-h3.h6
-rw-r--r--include/asm-arm/arch-omap/board-innovator.h3
-rw-r--r--include/asm-arm/arch-omap/board-perseus2.h6
-rw-r--r--include/asm-arm/arch-omap/clock.h17
-rw-r--r--include/asm-arm/arch-omap/common.h15
-rw-r--r--include/asm-arm/arch-omap/control.h4
-rw-r--r--include/asm-arm/arch-omap/cpu.h39
-rw-r--r--include/asm-arm/arch-omap/dma.h378
-rw-r--r--include/asm-arm/arch-omap/dmtimer.h1
-rw-r--r--include/asm-arm/arch-omap/fpga.h49
-rw-r--r--include/asm-arm/arch-omap/hardware.h1
-rw-r--r--include/asm-arm/arch-omap/io.h26
-rw-r--r--include/asm-arm/arch-omap/irqs.h44
-rw-r--r--include/asm-arm/arch-omap/mcbsp.h62
-rw-r--r--include/asm-arm/arch-omap/omap34xx.h72
-rw-r--r--include/asm-arm/arch-omap/sram.h37
-rw-r--r--include/asm-arm/arch-omap/tc.h10
-rw-r--r--include/asm-arm/arch-omap/usb.h23
-rw-r--r--include/asm-arm/arch-orion5x/io.h8
-rw-r--r--include/asm-arm/arch-orion5x/orion5x.h7
-rw-r--r--include/asm-arm/arch-orion5x/uncompress.h29
-rw-r--r--include/asm-arm/arch-pxa/audio.h2
-rw-r--r--include/asm-arm/arch-pxa/hardware.h9
-rw-r--r--include/asm-arm/arch-pxa/irda.h4
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h570
-rw-r--r--include/asm-arm/arch-pxa/pxa25x-udc.h163
-rw-r--r--include/asm-arm/arch-pxa/pxa27x-udc.h257
-rw-r--r--include/asm-arm/arch-pxa/pxa2xx-gpio.h2
-rw-r--r--include/asm-arm/arch-pxa/pxa2xx-regs.h162
-rw-r--r--include/asm-arm/arch-pxa/system.h1
-rw-r--r--include/asm-arm/arch-pxa/zylonite.h1
-rw-r--r--include/asm-arm/arch-rpc/io.h5
-rw-r--r--include/asm-arm/arch-s3c2410/gpio.h74
-rw-r--r--include/asm-arm/arch-s3c2410/regs-clock.h2
-rw-r--r--include/asm-arm/arch-s3c2410/regs-sdi.h20
-rw-r--r--include/asm-arm/assembler.h15
-rw-r--r--include/asm-arm/cacheflush.h13
-rw-r--r--include/asm-arm/dyntick.h6
-rw-r--r--include/asm-arm/ecard.h35
-rw-r--r--include/asm-arm/ftrace.h14
-rw-r--r--include/asm-arm/hardware/iop3xx-gpio.h73
-rw-r--r--include/asm-arm/hw_irq.h11
-rw-r--r--include/asm-arm/kexec.h2
-rw-r--r--include/asm-arm/kprobes.h1
-rw-r--r--include/asm-arm/mach/time.h22
-rw-r--r--include/asm-arm/mmu_context.h5
-rw-r--r--include/asm-arm/plat-orion/cache-feroceon-l2.h11
-rw-r--r--include/asm-arm/plat-orion/orion_nand.h1
-rw-r--r--include/asm-arm/plat-orion/pcie.h1
-rw-r--r--include/asm-arm/plat-s3c/regs-timer.h9
-rw-r--r--include/asm-arm/plat-s3c24xx/devs.h7
-rw-r--r--include/asm-arm/plat-s3c24xx/mci.h15
-rw-r--r--include/asm-arm/rtc.h43
-rw-r--r--include/asm-arm/smp.h3
-rw-r--r--include/asm-arm/tlbflush.h30
-rw-r--r--include/asm-avr32/arch-at32ap/board.h16
-rw-r--r--include/asm-avr32/arch-at32ap/init.h4
-rw-r--r--include/asm-avr32/arch-at32ap/pm.h3
-rw-r--r--include/asm-avr32/arch-at32ap/sram.h30
-rw-r--r--include/asm-avr32/atmel-mci.h9
-rw-r--r--include/asm-avr32/mmu_context.h1
-rw-r--r--include/asm-avr32/pci.h2
-rw-r--r--include/asm-avr32/pgalloc.h68
-rw-r--r--include/asm-avr32/pgtable.h34
-rw-r--r--include/asm-avr32/setup.h2
-rw-r--r--include/asm-avr32/thread_info.h1
-rw-r--r--include/asm-avr32/tlbflush.h1
-rw-r--r--include/asm-frv/system.h2
-rw-r--r--include/asm-generic/atomic.h2
-rw-r--r--include/asm-generic/pgtable.h57
-rw-r--r--include/asm-generic/topology.h3
-rw-r--r--include/asm-generic/vmlinux.lds.h33
-rw-r--r--include/asm-ia64/processor.h2
-rw-r--r--include/asm-ia64/smp.h8
-rw-r--r--include/asm-m32r/smp.h4
-rw-r--r--include/asm-mips/atomic.h4
-rw-r--r--include/asm-mips/barrier.h14
-rw-r--r--include/asm-mips/bitops.h6
-rw-r--r--include/asm-mips/bootinfo.h43
-rw-r--r--include/asm-mips/cpu.h4
-rw-r--r--include/asm-mips/dec/kn05.h9
-rw-r--r--include/asm-mips/inventory.h24
-rw-r--r--include/asm-mips/io.h17
-rw-r--r--include/asm-mips/lasat/lasat.h2
-rw-r--r--include/asm-mips/mach-atlas/mc146818rtc.h60
-rw-r--r--include/asm-mips/mach-au1x00/au1100_mmc.h18
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx_psc.h8
-rw-r--r--include/asm-mips/mach-db1x00/db1x00.h45
-rw-r--r--include/asm-mips/mach-malta/cpu-feature-overrides.h (renamed from include/asm-mips/mach-mips/cpu-feature-overrides.h)0
-rw-r--r--include/asm-mips/mach-malta/irq.h (renamed from include/asm-mips/mach-mips/irq.h)0
-rw-r--r--include/asm-mips/mach-malta/kernel-entry-init.h (renamed from include/asm-mips/mach-mips/kernel-entry-init.h)0
-rw-r--r--include/asm-mips/mach-malta/mach-gt64120.h (renamed from include/asm-mips/mach-mips/mach-gt64120.h)0
-rw-r--r--include/asm-mips/mach-malta/mc146818rtc.h (renamed from include/asm-mips/mach-mips/mc146818rtc.h)0
-rw-r--r--include/asm-mips/mach-malta/war.h (renamed from include/asm-mips/mach-mips/war.h)0
-rw-r--r--include/asm-mips/mach-tx39xx/ioremap.h (renamed from include/asm-mips/mach-jmr3927/ioremap.h)8
-rw-r--r--include/asm-mips/mach-tx39xx/mangle-port.h (renamed from include/asm-mips/mach-jmr3927/mangle-port.h)13
-rw-r--r--include/asm-mips/mach-tx39xx/war.h (renamed from include/asm-mips/mach-jmr3927/war.h)6
-rw-r--r--include/asm-mips/mach-vr41xx/irq.h3
-rw-r--r--include/asm-mips/mips-boards/generic.h9
-rw-r--r--include/asm-mips/namei.h25
-rw-r--r--include/asm-mips/pci.h3
-rw-r--r--include/asm-mips/prctl.h41
-rw-r--r--include/asm-mips/setup.h2
-rw-r--r--include/asm-mips/signal.h3
-rw-r--r--include/asm-mips/smp.h13
-rw-r--r--include/asm-mips/traps.h1
-rw-r--r--include/asm-mips/tx4927/tx4927.h46
-rw-r--r--include/asm-mips/tx4927/tx4927_pci.h268
-rw-r--r--include/asm-mips/txx9/generic.h41
-rw-r--r--include/asm-mips/txx9/jmr3927.h (renamed from include/asm-mips/jmr3927/jmr3927.h)13
-rw-r--r--include/asm-mips/txx9/pci.h36
-rw-r--r--include/asm-mips/txx9/rbtx4927.h (renamed from include/asm-mips/tx4927/toshiba_rbtx4927.h)52
-rw-r--r--include/asm-mips/txx9/rbtx4938.h (renamed from include/asm-mips/tx4938/rbtx4938.h)45
-rw-r--r--include/asm-mips/txx9/smsc_fdc37m81x.h (renamed from include/asm-mips/tx4927/smsc_fdc37m81x.h)2
-rw-r--r--include/asm-mips/txx9/spi.h (renamed from include/asm-mips/tx4938/spi.h)7
-rw-r--r--include/asm-mips/txx9/tx3927.h (renamed from include/asm-mips/jmr3927/tx3927.h)12
-rw-r--r--include/asm-mips/txx9/tx4927.h219
-rw-r--r--include/asm-mips/txx9/tx4927pcic.h199
-rw-r--r--include/asm-mips/txx9/tx4938.h (renamed from include/asm-mips/tx4938/tx4938.h)239
-rw-r--r--include/asm-mips/txx9/txx927.h (renamed from include/asm-mips/jmr3927/txx927.h)6
-rw-r--r--include/asm-mips/vr41xx/cmbvr4133.h56
-rw-r--r--include/asm-parisc/smp.h3
-rw-r--r--include/asm-powerpc/Kbuild2
-rw-r--r--include/asm-powerpc/asm-compat.h51
-rw-r--r--include/asm-powerpc/cache.h3
-rw-r--r--include/asm-powerpc/code-patching.h54
-rw-r--r--include/asm-powerpc/cpm.h1
-rw-r--r--include/asm-powerpc/cpm1.h20
-rw-r--r--include/asm-powerpc/cpm2.h26
-rw-r--r--include/asm-powerpc/cputable.h84
-rw-r--r--include/asm-powerpc/dcr-generic.h49
-rw-r--r--include/asm-powerpc/dcr-mmio.h20
-rw-r--r--include/asm-powerpc/dcr-native.h16
-rw-r--r--include/asm-powerpc/dcr.h39
-rw-r--r--include/asm-powerpc/dma-mapping.h125
-rw-r--r--include/asm-powerpc/elf.h37
-rw-r--r--include/asm-powerpc/feature-fixups.h126
-rw-r--r--include/asm-powerpc/firmware.h13
-rw-r--r--include/asm-powerpc/fsl_gtm.h47
-rw-r--r--include/asm-powerpc/ftrace.h14
-rw-r--r--include/asm-powerpc/hugetlb.h6
-rw-r--r--include/asm-powerpc/hw_irq.h10
-rw-r--r--include/asm-powerpc/io.h59
-rw-r--r--include/asm-powerpc/ioctl.h58
-rw-r--r--include/asm-powerpc/iommu.h16
-rw-r--r--include/asm-powerpc/irq.h13
-rw-r--r--include/asm-powerpc/kexec.h13
-rw-r--r--include/asm-powerpc/machdep.h1
-rw-r--r--include/asm-powerpc/mman.h36
-rw-r--r--include/asm-powerpc/mmu-hash32.h28
-rw-r--r--include/asm-powerpc/mmu-hash64.h1
-rw-r--r--include/asm-powerpc/mpc6xx.h6
-rw-r--r--include/asm-powerpc/mpic.h2
-rw-r--r--include/asm-powerpc/of_device.h2
-rw-r--r--include/asm-powerpc/pSeries_reconfig.h6
-rw-r--r--include/asm-powerpc/page_64.h6
-rw-r--r--include/asm-powerpc/pci-bridge.h3
-rw-r--r--include/asm-powerpc/pgtable-4k.h1
-rw-r--r--include/asm-powerpc/pgtable-64k.h17
-rw-r--r--include/asm-powerpc/pgtable-ppc32.h71
-rw-r--r--include/asm-powerpc/pgtable-ppc64.h14
-rw-r--r--include/asm-powerpc/ppc_asm.h114
-rw-r--r--include/asm-powerpc/processor.h28
-rw-r--r--include/asm-powerpc/prom.h16
-rw-r--r--include/asm-powerpc/ptrace.h13
-rw-r--r--include/asm-powerpc/qe.h82
-rw-r--r--include/asm-powerpc/reg.h6
-rw-r--r--include/asm-powerpc/reg_booke.h74
-rw-r--r--include/asm-powerpc/sigcontext.h37
-rw-r--r--include/asm-powerpc/smp.h10
-rw-r--r--include/asm-powerpc/sparsemem.h4
-rw-r--r--include/asm-powerpc/spinlock.h27
-rw-r--r--include/asm-powerpc/spu.h1
-rw-r--r--include/asm-powerpc/synch.h38
-rw-r--r--include/asm-powerpc/system.h72
-rw-r--r--include/asm-powerpc/thread_info.h19
-rw-r--r--include/asm-powerpc/time.h1
-rw-r--r--include/asm-powerpc/timex.h2
-rw-r--r--include/asm-powerpc/xmon.h9
-rw-r--r--include/asm-ppc/8xx_immap.h564
-rw-r--r--include/asm-ppc/amigayle.h1
-rw-r--r--include/asm-ppc/amipcmcia.h1
-rw-r--r--include/asm-ppc/bootinfo.h46
-rw-r--r--include/asm-ppc/bootx.h135
-rw-r--r--include/asm-ppc/btext.h34
-rw-r--r--include/asm-ppc/cpm1.h688
-rw-r--r--include/asm-ppc/cpm2.h1248
-rw-r--r--include/asm-ppc/delay.h66
-rw-r--r--include/asm-ppc/device.h7
-rw-r--r--include/asm-ppc/floppy.h178
-rw-r--r--include/asm-ppc/fs_pd.h36
-rw-r--r--include/asm-ppc/gg2.h61
-rw-r--r--include/asm-ppc/gt64260.h322
-rw-r--r--include/asm-ppc/gt64260_defs.h1010
-rw-r--r--include/asm-ppc/harrier.h43
-rw-r--r--include/asm-ppc/hawk.h32
-rw-r--r--include/asm-ppc/hawk_defs.h76
-rw-r--r--include/asm-ppc/highmem.h135
-rw-r--r--include/asm-ppc/hydra.h102
-rw-r--r--include/asm-ppc/ibm403.h478
-rw-r--r--include/asm-ppc/ibm405.h299
-rw-r--r--include/asm-ppc/ibm44x.h674
-rw-r--r--include/asm-ppc/ibm4xx.h124
-rw-r--r--include/asm-ppc/ibm_ocp.h204
-rw-r--r--include/asm-ppc/ibm_ocp_pci.h32
-rw-r--r--include/asm-ppc/immap_cpm2.h648
-rw-r--r--include/asm-ppc/io.h502
-rw-r--r--include/asm-ppc/irq_regs.h1
-rw-r--r--include/asm-ppc/kdebug.h1
-rw-r--r--include/asm-ppc/kgdb.h57
-rw-r--r--include/asm-ppc/m8260_pci.h187
-rw-r--r--include/asm-ppc/machdep.h178
-rw-r--r--include/asm-ppc/md.h15
-rw-r--r--include/asm-ppc/mk48t59.h27
-rw-r--r--include/asm-ppc/mmu.h444
-rw-r--r--include/asm-ppc/mmu_context.h198
-rw-r--r--include/asm-ppc/mpc10x.h180
-rw-r--r--include/asm-ppc/mpc52xx.h450
-rw-r--r--include/asm-ppc/mpc52xx_psc.h200
-rw-r--r--include/asm-ppc/mpc8260.h98
-rw-r--r--include/asm-ppc/mpc8260_pci9.h47
-rw-r--r--include/asm-ppc/mpc8xx.h122
-rw-r--r--include/asm-ppc/mv64x60.h353
-rw-r--r--include/asm-ppc/mv64x60_defs.h976
-rw-r--r--include/asm-ppc/ocp.h204
-rw-r--r--include/asm-ppc/ocp_ids.h73
-rw-r--r--include/asm-ppc/open_pic.h98
-rw-r--r--include/asm-ppc/page.h140
-rw-r--r--include/asm-ppc/pc_serial.h42
-rw-r--r--include/asm-ppc/pci-bridge.h151
-rw-r--r--include/asm-ppc/pci.h156
-rw-r--r--include/asm-ppc/pgalloc.h45
-rw-r--r--include/asm-ppc/pgtable.h771
-rw-r--r--include/asm-ppc/pnp.h645
-rw-r--r--include/asm-ppc/ppc4xx_dma.h579
-rw-r--r--include/asm-ppc/ppc4xx_pic.h52
-rw-r--r--include/asm-ppc/ppc_sys.h106
-rw-r--r--include/asm-ppc/ppcboot.h100
-rw-r--r--include/asm-ppc/prep_nvram.h153
-rw-r--r--include/asm-ppc/prom.h40
-rw-r--r--include/asm-ppc/raven.h35
-rw-r--r--include/asm-ppc/reg_booke.h443
-rw-r--r--include/asm-ppc/residual.h350
-rw-r--r--include/asm-ppc/rtc.h95
-rw-r--r--include/asm-ppc/serial.h43
-rw-r--r--include/asm-ppc/smp.h75
-rw-r--r--include/asm-ppc/spinlock.h168
-rw-r--r--include/asm-ppc/suspend.h12
-rw-r--r--include/asm-ppc/system.h289
-rw-r--r--include/asm-ppc/time.h161
-rw-r--r--include/asm-ppc/todc.h488
-rw-r--r--include/asm-ppc/traps.h1
-rw-r--r--include/asm-ppc/zorro.h30
-rw-r--r--include/asm-s390/Kbuild3
-rw-r--r--include/asm-s390/airq.h4
-rw-r--r--include/asm-s390/ccwdev.h12
-rw-r--r--include/asm-s390/chpid.h5
-rw-r--r--include/asm-s390/chsc.h127
-rw-r--r--include/asm-s390/cio.h114
-rw-r--r--include/asm-s390/elf.h51
-rw-r--r--include/asm-s390/etr.h45
-rw-r--r--include/asm-s390/fcx.h311
-rw-r--r--include/asm-s390/ipl.h17
-rw-r--r--include/asm-s390/isc.h25
-rw-r--r--include/asm-s390/itcw.h30
-rw-r--r--include/asm-s390/pgtable.h6
-rw-r--r--include/asm-s390/processor.h24
-rw-r--r--include/asm-s390/ptrace.h15
-rw-r--r--include/asm-s390/qdio.h646
-rw-r--r--include/asm-s390/schid.h31
-rw-r--r--include/asm-s390/sclp.h4
-rw-r--r--include/asm-s390/setup.h12
-rw-r--r--include/asm-s390/sparsemem.h4
-rw-r--r--include/asm-s390/timer.h12
-rw-r--r--include/asm-s390/zcrypt.h2
-rw-r--r--include/asm-sh/smp.h14
-rw-r--r--include/asm-sparc/smp.h2
-rw-r--r--include/asm-sparc64/ftrace.h14
-rw-r--r--include/asm-x86/acpi.h5
-rw-r--r--include/asm-x86/alternative.h2
-rw-r--r--include/asm-x86/amd_iommu.h32
-rw-r--r--include/asm-x86/amd_iommu_types.h244
-rw-r--r--include/asm-x86/apic.h14
-rw-r--r--include/asm-x86/asm.h55
-rw-r--r--include/asm-x86/atomic_64.h32
-rw-r--r--include/asm-x86/bios_ebda.h2
-rw-r--r--include/asm-x86/bitops.h68
-rw-r--r--include/asm-x86/bootparam.h2
-rw-r--r--include/asm-x86/cmpxchg_64.h37
-rw-r--r--include/asm-x86/cpufeature.h9
-rw-r--r--include/asm-x86/current.h42
-rw-r--r--include/asm-x86/current_32.h17
-rw-r--r--include/asm-x86/current_64.h27
-rw-r--r--include/asm-x86/desc.h50
-rw-r--r--include/asm-x86/desc_defs.h4
-rw-r--r--include/asm-x86/dmi.h8
-rw-r--r--include/asm-x86/dwarf2.h62
-rw-r--r--include/asm-x86/dwarf2_32.h61
-rw-r--r--include/asm-x86/dwarf2_64.h56
-rw-r--r--include/asm-x86/e820.h108
-rw-r--r--include/asm-x86/e820_32.h50
-rw-r--r--include/asm-x86/e820_64.h56
-rw-r--r--include/asm-x86/efi.h2
-rw-r--r--include/asm-x86/elf.h2
-rw-r--r--include/asm-x86/fixmap.h55
-rw-r--r--include/asm-x86/fixmap_32.h50
-rw-r--r--include/asm-x86/fixmap_64.h59
-rw-r--r--include/asm-x86/ftrace.h14
-rw-r--r--include/asm-x86/gart.h84
-rw-r--r--include/asm-x86/genapic_64.h2
-rw-r--r--include/asm-x86/hardirq.h6
-rw-r--r--include/asm-x86/highmem.h3
-rw-r--r--include/asm-x86/hpet.h2
-rw-r--r--include/asm-x86/hw_irq.h106
-rw-r--r--include/asm-x86/hw_irq_32.h66
-rw-r--r--include/asm-x86/hw_irq_64.h173
-rw-r--r--include/asm-x86/i8259.h2
-rw-r--r--include/asm-x86/io.h83
-rw-r--r--include/asm-x86/io_32.h61
-rw-r--r--include/asm-x86/io_64.h71
-rw-r--r--include/asm-x86/io_apic.h39
-rw-r--r--include/asm-x86/iommu.h31
-rw-r--r--include/asm-x86/ipi.h1
-rw-r--r--include/asm-x86/irq.h51
-rw-r--r--include/asm-x86/irq_32.h51
-rw-r--r--include/asm-x86/irq_64.h51
-rw-r--r--include/asm-x86/irq_vectors.h173
-rw-r--r--include/asm-x86/irqflags.h65
-rw-r--r--include/asm-x86/kvm_para.h15
-rw-r--r--include/asm-x86/mach-bigsmp/mach_apic.h2
-rw-r--r--include/asm-x86/mach-bigsmp/mach_mpspec.h8
-rw-r--r--include/asm-x86/mach-default/entry_arch.h1
-rw-r--r--include/asm-x86/mach-default/irq_vectors.h96
-rw-r--r--include/asm-x86/mach-default/irq_vectors_limits.h16
-rw-r--r--include/asm-x86/mach-default/mach_apic.h4
-rw-r--r--include/asm-x86/mach-default/setup_arch.h4
-rw-r--r--include/asm-x86/mach-default/smpboot_hooks.h10
-rw-r--r--include/asm-x86/mach-es7000/mach_mpspec.h8
-rw-r--r--include/asm-x86/mach-generic/mach_mpparse.h7
-rw-r--r--include/asm-x86/mach-numaq/mach_apic.h39
-rw-r--r--include/asm-x86/mach-numaq/mach_mpparse.h11
-rw-r--r--include/asm-x86/mach-numaq/mach_mpspec.h8
-rw-r--r--include/asm-x86/mach-summit/mach_mpspec.h9
-rw-r--r--include/asm-x86/mach-visws/entry_arch.h22
-rw-r--r--include/asm-x86/mach-visws/irq_vectors.h62
-rw-r--r--include/asm-x86/mach-visws/mach_apic.h104
-rw-r--r--include/asm-x86/mach-visws/mach_apicdef.h13
-rw-r--r--include/asm-x86/mach-visws/setup_arch.h9
-rw-r--r--include/asm-x86/mach-visws/smpboot_hooks.h29
-rw-r--r--include/asm-x86/mach-voyager/entry_arch.h2
-rw-r--r--include/asm-x86/mach-voyager/irq_vectors.h79
-rw-r--r--include/asm-x86/mmconfig.h12
-rw-r--r--include/asm-x86/mmu_context.h32
-rw-r--r--include/asm-x86/mmu_context_32.h28
-rw-r--r--include/asm-x86/mmu_context_64.h18
-rw-r--r--include/asm-x86/mmzone_32.h26
-rw-r--r--include/asm-x86/mpspec.h36
-rw-r--r--include/asm-x86/mpspec_def.h9
-rw-r--r--include/asm-x86/msr-index.h4
-rw-r--r--include/asm-x86/msr.h5
-rw-r--r--include/asm-x86/nmi.h47
-rw-r--r--include/asm-x86/numa_32.h8
-rw-r--r--include/asm-x86/numa_64.h20
-rw-r--r--include/asm-x86/numaq.h8
-rw-r--r--include/asm-x86/page.h12
-rw-r--r--include/asm-x86/page_32.h15
-rw-r--r--include/asm-x86/page_64.h18
-rw-r--r--include/asm-x86/paravirt.h197
-rw-r--r--include/asm-x86/pat.h8
-rw-r--r--include/asm-x86/pci-direct.h4
-rw-r--r--include/asm-x86/pci.h2
-rw-r--r--include/asm-x86/pci_32.h14
-rw-r--r--include/asm-x86/pda.h5
-rw-r--r--include/asm-x86/percpu.h46
-rw-r--r--include/asm-x86/pgalloc.h4
-rw-r--r--include/asm-x86/pgtable.h141
-rw-r--r--include/asm-x86/pgtable_32.h20
-rw-r--r--include/asm-x86/pgtable_64.h8
-rw-r--r--include/asm-x86/processor-flags.h6
-rw-r--r--include/asm-x86/processor.h11
-rw-r--r--include/asm-x86/proto.h2
-rw-r--r--include/asm-x86/ptrace.h8
-rw-r--r--include/asm-x86/reboot.h2
-rw-r--r--include/asm-x86/required-features.h8
-rw-r--r--include/asm-x86/resume-trace.h2
-rw-r--r--include/asm-x86/seccomp_32.h1
-rw-r--r--include/asm-x86/seccomp_64.h1
-rw-r--r--include/asm-x86/segment.h23
-rw-r--r--include/asm-x86/setup.h37
-rw-r--r--include/asm-x86/smp.h48
-rw-r--r--include/asm-x86/srat.h12
-rw-r--r--include/asm-x86/string_32.h323
-rw-r--r--include/asm-x86/suspend_32.h5
-rw-r--r--include/asm-x86/system.h10
-rw-r--r--include/asm-x86/thread_info.h248
-rw-r--r--include/asm-x86/thread_info_32.h205
-rw-r--r--include/asm-x86/thread_info_64.h195
-rw-r--r--include/asm-x86/time.h2
-rw-r--r--include/asm-x86/timer.h4
-rw-r--r--include/asm-x86/topology.h157
-rw-r--r--include/asm-x86/tsc.h2
-rw-r--r--include/asm-x86/uaccess.h448
-rw-r--r--include/asm-x86/uaccess_32.h422
-rw-r--r--include/asm-x86/uaccess_64.h263
-rw-r--r--include/asm-x86/unistd_64.h2
-rw-r--r--include/asm-x86/uv/uv_bau.h337
-rw-r--r--include/asm-x86/uv/uv_hub.h190
-rw-r--r--include/asm-x86/uv/uv_mmrs.h954
-rw-r--r--include/asm-x86/visws/cobalt.h (renamed from include/asm-x86/mach-visws/cobalt.h)0
-rw-r--r--include/asm-x86/visws/lithium.h (renamed from include/asm-x86/mach-visws/lithium.h)0
-rw-r--r--include/asm-x86/visws/piix4.h (renamed from include/asm-x86/mach-visws/piix4.h)0
-rw-r--r--include/asm-x86/visws/sgivw.h5
-rw-r--r--include/asm-x86/vm86.h11
-rw-r--r--include/asm-x86/vmi_time.h2
-rw-r--r--include/asm-x86/vsyscall.h3
-rw-r--r--include/asm-x86/xen/events.h1
-rw-r--r--include/asm-x86/xen/hypercall.h11
-rw-r--r--include/asm-x86/xen/page.h25
-rw-r--r--include/asm-x86/xor_32.h5
-rw-r--r--include/asm-x86/xor_64.h5
-rw-r--r--include/crypto/hash.h154
-rw-r--r--include/crypto/internal/hash.h78
-rw-r--r--include/drm/Kbuild10
-rw-r--r--include/drm/drm.h694
-rw-r--r--include/drm/drmP.h1154
-rw-r--r--include/drm/drm_core.h34
-rw-r--r--include/drm/drm_hashtab.h67
-rw-r--r--include/drm/drm_memory.h61
-rw-r--r--include/drm/drm_memory_debug.h309
-rw-r--r--include/drm/drm_os_linux.h108
-rw-r--r--include/drm/drm_pciids.h415
-rw-r--r--include/drm/drm_sarea.h84
-rw-r--r--include/drm/drm_sman.h176
-rw-r--r--include/drm/i810_drm.h281
-rw-r--r--include/drm/i830_drm.h342
-rw-r--r--include/drm/i915_drm.h270
-rw-r--r--include/drm/mga_drm.h417
-rw-r--r--include/drm/r128_drm.h326
-rw-r--r--include/drm/radeon_drm.h749
-rw-r--r--include/drm/savage_drm.h210
-rw-r--r--include/drm/sis_drm.h67
-rw-r--r--include/drm/via_drm.h275
-rw-r--r--include/linux/acpi.h9
-rw-r--r--include/linux/adb.h1
-rw-r--r--include/linux/bio.h130
-rw-r--r--include/linux/blkdev.h167
-rw-r--r--include/linux/blktrace_api.h1
-rw-r--r--include/linux/bootmem.h2
-rw-r--r--include/linux/capability.h2
-rw-r--r--include/linux/cfag12864b.h2
-rw-r--r--include/linux/configfs.h4
-rw-r--r--include/linux/console.h2
-rw-r--r--include/linux/cpumask.h4
-rw-r--r--include/linux/crc-t10dif.h8
-rw-r--r--include/linux/crypto.h48
-rw-r--r--include/linux/dcache.h1
-rw-r--r--include/linux/debug_locks.h10
-rw-r--r--include/linux/delay.h1
-rw-r--r--include/linux/device.h9
-rw-r--r--include/linux/efi.h4
-rw-r--r--include/linux/elf.h1
-rw-r--r--include/linux/firmware-map.h74
-rw-r--r--include/linux/firmware.h25
-rw-r--r--include/linux/freezer.h10
-rw-r--r--include/linux/fs.h7
-rw-r--r--include/linux/ftrace.h144
-rw-r--r--include/linux/genhd.h12
-rw-r--r--include/linux/i2c-algo-pcf.h8
-rw-r--r--include/linux/i2c-id.h3
-rw-r--r--include/linux/i2c.h46
-rw-r--r--include/linux/i2c/at24.h28
-rw-r--r--include/linux/ide.h144
-rw-r--r--include/linux/ihex.h74
-rw-r--r--include/linux/inet.h7
-rw-r--r--include/linux/init_task.h4
-rw-r--r--include/linux/interrupt.h8
-rw-r--r--include/linux/iocontext.h18
-rw-r--r--include/linux/ioport.h5
-rw-r--r--include/linux/irq.h9
-rw-r--r--include/linux/irqflags.h13
-rw-r--r--include/linux/jbd2.h73
-rw-r--r--include/linux/kernel.h11
-rw-r--r--include/linux/kernel_stat.h2
-rw-r--r--include/linux/kprobes.h4
-rw-r--r--include/linux/ks0108.h2
-rw-r--r--include/linux/libata.h55
-rw-r--r--include/linux/linkage.h6
-rw-r--r--include/linux/list.h367
-rw-r--r--include/linux/lm_interface.h6
-rw-r--r--include/linux/lockdep.h11
-rw-r--r--include/linux/marker.h40
-rw-r--r--include/linux/mlx4/device.h3
-rw-r--r--include/linux/mm.h8
-rw-r--r--include/linux/mman.h29
-rw-r--r--include/linux/mmc/core.h1
-rw-r--r--include/linux/mmc/host.h32
-rw-r--r--include/linux/mmc/mmc.h1
-rw-r--r--include/linux/mmc/sdio_func.h21
-rw-r--r--include/linux/mmiotrace.h85
-rw-r--r--include/linux/mod_devicetable.h9
-rw-r--r--include/linux/mpage.h10
-rw-r--r--include/linux/nfs_fs.h10
-rw-r--r--include/linux/nfs_iostat.h119
-rw-r--r--include/linux/nfs_page.h9
-rw-r--r--include/linux/nfs_xdr.h3
-rw-r--r--include/linux/of_device.h3
-rw-r--r--include/linux/page-flags.h1
-rw-r--r--include/linux/pageblock-flags.h8
-rw-r--r--include/linux/pci.h57
-rw-r--r--include/linux/pci_hotplug.h14
-rw-r--r--include/linux/pci_ids.h4
-rw-r--r--include/linux/pci_regs.h1
-rw-r--r--include/linux/percpu_counter.h12
-rw-r--r--include/linux/platform_device.h1
-rw-r--r--include/linux/pm.h314
-rw-r--r--include/linux/pm_wakeup.h28
-rw-r--r--include/linux/pnp.h146
-rw-r--r--include/linux/preempt.h34
-rw-r--r--include/linux/ptrace.h8
-rw-r--r--include/linux/pwm.h31
-rw-r--r--include/linux/pwm_backlight.h17
-rw-r--r--include/linux/rcuclassic.h3
-rw-r--r--include/linux/rculist.h373
-rw-r--r--include/linux/rcupdate.h26
-rw-r--r--include/linux/rcupreempt.h42
-rw-r--r--include/linux/resume-trace.h2
-rw-r--r--include/linux/sched.h104
-rw-r--r--include/linux/securebits.h15
-rw-r--r--include/linux/security.h49
-rw-r--r--include/linux/slab.h2
-rw-r--r--include/linux/slub_def.h4
-rw-r--r--include/linux/smp.h46
-rw-r--r--include/linux/smp_lock.h13
-rw-r--r--include/linux/spi/mmc_spi.h9
-rw-r--r--include/linux/sunrpc/clnt.h7
-rw-r--r--include/linux/sunrpc/sched.h1
-rw-r--r--include/linux/suspend.h14
-rw-r--r--include/linux/topology.h13
-rw-r--r--include/linux/writeback.h3
-rw-r--r--include/pcmcia/bulkmem.h41
-rw-r--r--include/pcmcia/cistpl.h2
-rw-r--r--include/pcmcia/cs.h3
-rw-r--r--include/pcmcia/cs_types.h6
-rw-r--r--include/pcmcia/ds.h19
-rw-r--r--include/pcmcia/ss.h12
-rw-r--r--include/pcmcia/version.h3
-rw-r--r--include/rdma/ib_addr.h43
-rw-r--r--include/rdma/ib_cache.h2
-rw-r--r--include/rdma/ib_cm.h2
-rw-r--r--include/rdma/ib_fmr_pool.h4
-rw-r--r--include/rdma/ib_mad.h17
-rw-r--r--include/rdma/ib_pack.h2
-rw-r--r--include/rdma/ib_sa.h2
-rw-r--r--include/rdma/ib_smi.h4
-rw-r--r--include/rdma/ib_user_cm.h2
-rw-r--r--include/rdma/ib_user_mad.h2
-rw-r--r--include/rdma/ib_user_verbs.h7
-rw-r--r--include/rdma/ib_verbs.h149
-rw-r--r--include/rdma/iw_cm.h2
-rw-r--r--include/rdma/rdma_cm.h52
-rw-r--r--include/rdma/rdma_cm_ib.h50
-rw-r--r--include/scsi/iscsi_if.h93
-rw-r--r--include/scsi/iscsi_proto.h3
-rw-r--r--include/scsi/libiscsi.h107
-rw-r--r--include/scsi/scsi.h18
-rw-r--r--include/scsi/scsi_cmnd.h1
-rw-r--r--include/scsi/scsi_device.h23
-rw-r--r--include/scsi/scsi_dh.h69
-rw-r--r--include/scsi/scsi_transport_iscsi.h91
-rw-r--r--include/scsi/sd.h57
-rw-r--r--include/scsi/sg.h1
-rw-r--r--include/sound/ad1843.h46
-rw-r--r--include/sound/control.h3
-rw-r--r--include/sound/core.h8
-rw-r--r--include/sound/cs4231-regs.h8
-rw-r--r--include/sound/cs4231.h3
-rw-r--r--include/sound/emu10k1.h1
-rw-r--r--include/sound/seq_kernel.h2
-rw-r--r--include/sound/soc-dapm.h42
-rw-r--r--include/sound/soc.h175
-rw-r--r--include/sound/uda1341.h2
-rw-r--r--include/sound/version.h4
-rw-r--r--include/xen/events.h4
-rw-r--r--include/xen/grant_table.h3
-rw-r--r--include/xen/hvc-console.h9
-rw-r--r--include/xen/interface/elfnote.h20
-rw-r--r--include/xen/interface/features.h3
-rw-r--r--include/xen/interface/io/fbif.h29
-rw-r--r--include/xen/interface/io/kbdif.h2
-rw-r--r--include/xen/interface/memory.h12
-rw-r--r--include/xen/interface/xen.h9
-rw-r--r--include/xen/xen-ops.h6
696 files changed, 22210 insertions, 24689 deletions
diff --git a/include/Kbuild b/include/Kbuild
index b5228877434..bdca155028e 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -4,5 +4,6 @@ header-y += sound/
header-y += mtd/
header-y += rdma/
header-y += video/
+header-y += drm/
header-y += asm-$(ARCH)/
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 28fe8bae103..4eb75a88795 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -63,7 +63,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20080321
+#define ACPI_CA_VERSION 0x20080609
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h
index 788f8878201..f53faca8ec8 100644
--- a/include/acpi/acdisasm.h
+++ b/include/acpi/acdisasm.h
@@ -162,6 +162,7 @@ extern struct acpi_dmtable_info acpi_dm_table_info_dmar_hdr[];
extern struct acpi_dmtable_info acpi_dm_table_info_dmar_scope[];
extern struct acpi_dmtable_info acpi_dm_table_info_dmar0[];
extern struct acpi_dmtable_info acpi_dm_table_info_dmar1[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar2[];
extern struct acpi_dmtable_info acpi_dm_table_info_ecdt[];
extern struct acpi_dmtable_info acpi_dm_table_info_einj[];
extern struct acpi_dmtable_info acpi_dm_table_info_einj0[];
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
index 910f018d92c..21a73a105d0 100644
--- a/include/acpi/acdispat.h
+++ b/include/acpi/acdispat.h
@@ -221,7 +221,7 @@ acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state);
* dsinit
*/
acpi_status
-acpi_ds_initialize_objects(acpi_native_uint table_index,
+acpi_ds_initialize_objects(u32 table_index,
struct acpi_namespace_node *start_node);
/*
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 1f591171bf3..e5a890ffeb0 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -108,8 +108,9 @@
#define AE_BAD_HEX_CONSTANT (acpi_status) (0x0007 | AE_CODE_PROGRAMMER)
#define AE_BAD_OCTAL_CONSTANT (acpi_status) (0x0008 | AE_CODE_PROGRAMMER)
#define AE_BAD_DECIMAL_CONSTANT (acpi_status) (0x0009 | AE_CODE_PROGRAMMER)
+#define AE_MISSING_ARGUMENTS (acpi_status) (0x000A | AE_CODE_PROGRAMMER)
-#define AE_CODE_PGM_MAX 0x0009
+#define AE_CODE_PGM_MAX 0x000A
/*
* Acpi table exceptions
@@ -225,6 +226,7 @@ char const *acpi_gbl_exception_names_env[] = {
};
char const *acpi_gbl_exception_names_pgm[] = {
+ NULL,
"AE_BAD_PARAMETER",
"AE_BAD_CHARACTER",
"AE_BAD_PATHNAME",
@@ -233,10 +235,12 @@ char const *acpi_gbl_exception_names_pgm[] = {
"AE_ALIGNMENT",
"AE_BAD_HEX_CONSTANT",
"AE_BAD_OCTAL_CONSTANT",
- "AE_BAD_DECIMAL_CONSTANT"
+ "AE_BAD_DECIMAL_CONSTANT",
+ "AE_MISSING_ARGUMENTS"
};
char const *acpi_gbl_exception_names_tbl[] = {
+ NULL,
"AE_BAD_SIGNATURE",
"AE_BAD_HEADER",
"AE_BAD_CHECKSUM",
@@ -246,6 +250,7 @@ char const *acpi_gbl_exception_names_tbl[] = {
};
char const *acpi_gbl_exception_names_aml[] = {
+ NULL,
"AE_AML_ERROR",
"AE_AML_PARSE",
"AE_AML_BAD_OPCODE",
@@ -283,6 +288,7 @@ char const *acpi_gbl_exception_names_aml[] = {
};
char const *acpi_gbl_exception_names_ctrl[] = {
+ NULL,
"AE_CTRL_RETURN_VALUE",
"AE_CTRL_PENDING",
"AE_CTRL_TERMINATE",
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 74ad971241d..15dda46b70d 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -140,7 +140,7 @@ ACPI_EXTERN u32 acpi_gbl_trace_flags;
*/
ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list;
ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT;
-extern acpi_native_uint acpi_gbl_permanent_mmap;
+extern u8 acpi_gbl_permanent_mmap;
/* These addresses are calculated from FADT address values */
diff --git a/include/acpi/achware.h b/include/acpi/achware.h
index d4fb9bbc903..97a72b19327 100644
--- a/include/acpi/achware.h
+++ b/include/acpi/achware.h
@@ -87,6 +87,8 @@ acpi_status acpi_hw_clear_acpi_status(void);
/*
* hwgpe - GPE support
*/
+acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
acpi_status
acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
@@ -100,11 +102,9 @@ acpi_status
acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block);
-#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info,
acpi_event_status * event_status);
-#endif /* ACPI_FUTURE_USAGE */
acpi_status acpi_hw_disable_all_gpes(void);
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
index e249ce5d330..e8db7a3143a 100644
--- a/include/acpi/acinterp.h
+++ b/include/acpi/acinterp.h
@@ -366,10 +366,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth);
void
acpi_ex_dump_operands(union acpi_operand_object **operands,
- acpi_interpreter_mode interpreter_mode,
- char *ident,
- u32 num_levels,
- char *note, char *module_name, u32 line_number);
+ const char *opcode_name, u32 num_opcodes);
#ifdef ACPI_FUTURE_USAGE
void
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index c5cdc32ac2f..b221c8583dd 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -98,8 +98,8 @@ union acpi_parse_object;
static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
"ACPI_MTX_Interpreter",
- "ACPI_MTX_Tables",
"ACPI_MTX_Namespace",
+ "ACPI_MTX_Tables",
"ACPI_MTX_Events",
"ACPI_MTX_Caches",
"ACPI_MTX_Memory",
@@ -282,8 +282,8 @@ struct acpi_predefined_names {
/* Info structure used to convert external<->internal namestrings */
struct acpi_namestring_info {
- char *external_name;
- char *next_external_char;
+ const char *external_name;
+ const char *next_external_char;
char *internal_name;
u32 length;
u32 num_segments;
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
index fb41a3b802f..57ab9e9d759 100644
--- a/include/acpi/acmacros.h
+++ b/include/acpi/acmacros.h
@@ -80,12 +80,12 @@
*/
#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
-#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
-#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
+#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_size)(b)))
+#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
/* Pointer/Integer type conversions */
-#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
+#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i)
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
@@ -296,22 +296,22 @@ struct acpi_integer_overlay {
/*
* Rounding macros (Power of two boundaries only)
*/
-#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & \
- (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \
+ (~(((acpi_size) boundary)-1)))
-#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + \
- (((acpi_native_uint) boundary)-1)) & \
- (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \
+ (((acpi_size) boundary)-1)) & \
+ (~(((acpi_size) boundary)-1)))
-/* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */
+/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a,4)
#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a,8)
-#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint))
+#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,sizeof(acpi_size))
#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a,4)
#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a,8)
-#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,sizeof(acpi_native_uint))
+#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,sizeof(acpi_size))
#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7)
#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a))
@@ -322,7 +322,7 @@ struct acpi_integer_overlay {
#define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary))
-#define ACPI_IS_MISALIGNED(value) (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1))
+#define ACPI_IS_MISALIGNED(value) (((acpi_size)value) & (sizeof(acpi_size)-1))
/*
* Bitmask creation
@@ -414,7 +414,7 @@ struct acpi_integer_overlay {
* error messages. The __FILE__ macro is not very useful for this, because it
* often includes the entire pathname to the module
*/
-#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
+#define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name;
#else
#define ACPI_MODULE_NAME(name)
#endif
@@ -467,19 +467,17 @@ struct acpi_integer_overlay {
/*
* If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
* define it now. This is the case where there the compiler does not support
- * a __FUNCTION__ macro or equivalent. We save the function name on the
- * local stack.
+ * a __FUNCTION__ macro or equivalent.
*/
#ifndef ACPI_GET_FUNCTION_NAME
#define ACPI_GET_FUNCTION_NAME _acpi_function_name
/*
* The Name parameter should be the procedure name as a quoted string.
- * This is declared as a local string ("MyFunctionName") so that it can
- * be also used by the function exit macros below.
+ * The function name is also used by the function exit macros below.
* Note: (const char) is used to be compatible with the debug interfaces
* and macros such as __FUNCTION__.
*/
-#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = #name;
+#define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name;
#else
/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
@@ -599,7 +597,7 @@ struct acpi_integer_overlay {
/* Stack and buffer dumping */
#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a),0)
-#define ACPI_DUMP_OPERANDS(a,b,c,d,e) acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__)
+#define ACPI_DUMP_OPERANDS(a,b,c) acpi_ex_dump_operands(a,b,c)
#define ACPI_DUMP_ENTRY(a,b) acpi_ns_dump_entry (a,b)
#define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d)
@@ -635,7 +633,7 @@ struct acpi_integer_overlay {
#define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0)
#define ACPI_FUNCTION_ENTRY() do { } while(0)
#define ACPI_DUMP_STACK_ENTRY(a) do { } while(0)
-#define ACPI_DUMP_OPERANDS(a,b,c,d,e) do { } while(0)
+#define ACPI_DUMP_OPERANDS(a,b,c) do { } while(0)
#define ACPI_DUMP_ENTRY(a,b) do { } while(0)
#define ACPI_DUMP_TABLES(a,b) do { } while(0)
#define ACPI_DUMP_PATHNAME(a,b,c,d) do { } while(0)
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index 713b30903fe..9ed70a05058 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -86,8 +86,7 @@ acpi_status acpi_ns_initialize_devices(void);
acpi_status acpi_ns_load_namespace(void);
acpi_status
-acpi_ns_load_table(acpi_native_uint table_index,
- struct acpi_namespace_node *node);
+acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node);
/*
* nswalk - walk the namespace
@@ -108,12 +107,11 @@ struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct
* nsparse - table parsing
*/
acpi_status
-acpi_ns_parse_table(acpi_native_uint table_index,
- struct acpi_namespace_node *start_node);
+acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node);
acpi_status
-acpi_ns_one_complete_parse(acpi_native_uint pass_number,
- acpi_native_uint table_index,
+acpi_ns_one_complete_parse(u32 pass_number,
+ u32 table_index,
struct acpi_namespace_node *start_node);
/*
@@ -201,7 +199,7 @@ acpi_ns_pattern_match(struct acpi_namespace_node *obj_node, char *search_for);
acpi_status
acpi_ns_get_node(struct acpi_namespace_node *prefix_node,
- char *external_pathname,
+ const char *external_pathname,
u32 flags, struct acpi_namespace_node **out_node);
acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node);
@@ -265,28 +263,30 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node *node);
u32 acpi_ns_local(acpi_object_type type);
void
-acpi_ns_report_error(char *module_name,
+acpi_ns_report_error(const char *module_name,
u32 line_number,
- char *internal_name, acpi_status lookup_status);
+ const char *internal_name, acpi_status lookup_status);
void
-acpi_ns_report_method_error(char *module_name,
+acpi_ns_report_method_error(const char *module_name,
u32 line_number,
- char *message,
+ const char *message,
struct acpi_namespace_node *node,
- char *path, acpi_status lookup_status);
+ const char *path, acpi_status lookup_status);
-void acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *msg);
+void
+acpi_ns_print_node_pathname(struct acpi_namespace_node *node, const char *msg);
acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info);
void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info);
-acpi_status acpi_ns_internalize_name(char *dotted_name, char **converted_name);
+acpi_status
+acpi_ns_internalize_name(const char *dotted_name, char **converted_name);
acpi_status
acpi_ns_externalize_name(u32 internal_name_length,
- char *internal_name,
+ const char *internal_name,
u32 * converted_name_length, char **converted_name);
struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 2f1c68c7a72..a5ac0bc7f52 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -259,6 +259,7 @@ struct acpi_device_perf {
/* Wakeup Management */
struct acpi_device_wakeup_flags {
u8 valid:1; /* Can successfully enable wakeup? */
+ u8 prepared:1; /* Has the wake-up capability been enabled? */
u8 run_wake:1; /* Run-Wake GPE devices */
};
@@ -335,6 +336,8 @@ void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
+bool acpi_bus_power_manageable(acpi_handle handle);
+bool acpi_bus_can_wakeup(acpi_handle handle);
#ifdef CONFIG_ACPI_PROC_EVENT
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
@@ -376,14 +379,19 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
#ifdef CONFIG_PM_SLEEP
-int acpi_pm_device_sleep_state(struct device *, int, int *);
+int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_wake(struct device *, bool);
#else /* !CONFIG_PM_SLEEP */
-static inline int acpi_pm_device_sleep_state(struct device *d, int w, int *p)
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
{
if (p)
*p = ACPI_STATE_D0;
return ACPI_STATE_D3;
}
+static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ return -ENODEV;
+}
#endif /* !CONFIG_PM_SLEEP */
#endif /* CONFIG_ACPI */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 9757a040a50..e5f38e5ce86 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -87,7 +87,9 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_POWER
-int acpi_enable_wakeup_device_power(struct acpi_device *dev);
+int acpi_device_sleep_wake(struct acpi_device *dev,
+ int enable, int sleep_state, int dev_state);
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index d4a560d2deb..3f93a6b4e17 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -144,7 +144,7 @@ void acpi_os_release_mutex(acpi_mutex handle);
void *acpi_os_allocate(acpi_size size);
void __iomem *acpi_os_map_memory(acpi_physical_address where,
- acpi_native_uint length);
+ acpi_size length);
void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size);
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 2c3806e6546..94d94e126e9 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -98,7 +98,7 @@ void acpi_free(void *address);
*/
acpi_status acpi_reallocate_root_table(void);
-acpi_status acpi_find_root_pointer(acpi_native_uint * rsdp_address);
+acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
acpi_status acpi_load_tables(void);
@@ -108,15 +108,15 @@ acpi_status acpi_unload_table_id(acpi_owner_id id);
acpi_status
acpi_get_table_header(acpi_string signature,
- acpi_native_uint instance,
+ u32 instance,
struct acpi_table_header *out_table_header);
acpi_status
acpi_get_table(acpi_string signature,
- acpi_native_uint instance, struct acpi_table_header **out_table);
+ u32 instance, struct acpi_table_header **out_table);
acpi_status
-acpi_get_table_by_index(acpi_native_uint table_index,
+acpi_get_table_by_index(u32 table_index,
struct acpi_table_header **out_table);
acpi_status
@@ -248,9 +248,7 @@ acpi_status acpi_disable_event(u32 event, u32 flags);
acpi_status acpi_clear_event(u32 event);
-#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status);
-#endif /* ACPI_FUTURE_USAGE */
acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type);
@@ -260,12 +258,10 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags);
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags);
-#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_get_gpe_status(acpi_handle gpe_device,
u32 gpe_number,
u32 flags, acpi_event_status * event_status);
-#endif /* ACPI_FUTURE_USAGE */
acpi_status
acpi_install_gpe_block(acpi_handle gpe_device,
diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h
index a907c67d651..7980a26bad3 100644
--- a/include/acpi/acstruct.h
+++ b/include/acpi/acstruct.h
@@ -108,7 +108,6 @@ struct acpi_walk_state {
union acpi_operand_object **caller_return_desc;
union acpi_generic_state *control_state; /* List of control states (nested IFs) */
struct acpi_namespace_node *deferred_node; /* Used when executing deferred opcodes */
- struct acpi_gpe_event_info *gpe_event_info; /* Info for GPE (_Lxx/_Exx methods only */
union acpi_operand_object *implicit_return_obj;
struct acpi_namespace_node *method_call_node; /* Called method Node */
union acpi_parse_object *method_call_op; /* method_call Op if running a method */
@@ -143,7 +142,7 @@ struct acpi_init_walk_info {
u16 package_init;
u16 object_count;
acpi_owner_id owner_id;
- acpi_native_uint table_index;
+ u32 table_index;
};
struct acpi_get_devices_info {
@@ -189,17 +188,12 @@ struct acpi_evaluate_info {
union acpi_operand_object **parameters;
struct acpi_namespace_node *resolved_node;
union acpi_operand_object *return_object;
+ u8 param_count;
u8 pass_number;
- u8 parameter_type;
u8 return_object_type;
u8 flags;
};
-/* Types for parameter_type above */
-
-#define ACPI_PARAM_ARGS 0
-#define ACPI_PARAM_GPE 1
-
/* Values for Flags above */
#define ACPI_IGNORE_RETURN_VALUE 1
diff --git a/include/acpi/actables.h b/include/acpi/actables.h
index 4b36a55b0b3..0cbe1b9ab52 100644
--- a/include/acpi/actables.h
+++ b/include/acpi/actables.h
@@ -49,7 +49,7 @@ acpi_status acpi_allocate_root_table(u32 initial_table_count);
/*
* tbfadt - FADT parse/convert/validate
*/
-void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags);
+void acpi_tb_parse_fadt(u32 table_index, u8 flags);
void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length);
@@ -58,8 +58,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length);
*/
acpi_status
acpi_tb_find_table(char *signature,
- char *oem_id,
- char *oem_table_id, acpi_native_uint * table_index);
+ char *oem_id, char *oem_table_id, u32 *table_index);
/*
* tbinstal - Table removal and deletion
@@ -69,30 +68,28 @@ acpi_status acpi_tb_resize_root_table_list(void);
acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc);
acpi_status
-acpi_tb_add_table(struct acpi_table_desc *table_desc,
- acpi_native_uint * table_index);
+acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index);
acpi_status
acpi_tb_store_table(acpi_physical_address address,
struct acpi_table_header *table,
- u32 length, u8 flags, acpi_native_uint * table_index);
+ u32 length, u8 flags, u32 *table_index);
void acpi_tb_delete_table(struct acpi_table_desc *table_desc);
void acpi_tb_terminate(void);
-void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index);
+void acpi_tb_delete_namespace_by_owner(u32 table_index);
-acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index);
+acpi_status acpi_tb_allocate_owner_id(u32 table_index);
-acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index);
+acpi_status acpi_tb_release_owner_id(u32 table_index);
-acpi_status
-acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id);
+acpi_status acpi_tb_get_owner_id(u32 table_index, acpi_owner_id *owner_id);
-u8 acpi_tb_is_table_loaded(acpi_native_uint table_index);
+u8 acpi_tb_is_table_loaded(u32 table_index);
-void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded);
+void acpi_tb_set_table_loaded_flag(u32 table_index, u8 is_loaded);
/*
* tbutils - table manager utilities
@@ -103,14 +100,14 @@ void
acpi_tb_print_table_header(acpi_physical_address address,
struct acpi_table_header *header);
-u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length);
+u8 acpi_tb_checksum(u8 *buffer, u32 length);
acpi_status
acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length);
void
acpi_tb_install_table(acpi_physical_address address,
- u8 flags, char *signature, acpi_native_uint table_index);
+ u8 flags, char *signature, u32 table_index);
acpi_status
acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags);
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 9af239bd115..d38f9be2f6e 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -300,6 +300,7 @@ struct acpi_table_dbgp {
/*******************************************************************************
*
* DMAR - DMA Remapping table
+ * From "Intel Virtualization Technology for Directed I/O", Sept. 2007
*
******************************************************************************/
@@ -310,6 +311,10 @@ struct acpi_table_dmar {
u8 reserved[10];
};
+/* Flags */
+
+#define ACPI_DMAR_INTR_REMAP (1)
+
/* DMAR subtable header */
struct acpi_dmar_header {
@@ -382,6 +387,20 @@ struct acpi_dmar_reserved_memory {
#define ACPI_DMAR_ALLOW_ALL (1)
+
+/* 2: Root Port ATS Capability Reporting Structure */
+
+struct acpi_dmar_atsr {
+ struct acpi_dmar_header header;
+ u8 flags;
+ u8 reserved;
+ u16 segment;
+};
+
+/* Flags */
+
+#define ACPI_DMAR_ALL_PORTS (1)
+
/*******************************************************************************
*
* ECDT - Embedded Controller Boot Resources Table
@@ -1156,9 +1175,9 @@ struct acpi_srat_mem_affinity {
u16 reserved; /* Reserved, must be zero */
u64 base_address;
u64 length;
- u32 memory_type; /* See acpi_address_range_id */
+ u32 reserved1;
u32 flags;
- u64 reserved1; /* Reserved, must be zero */
+ u64 reserved2; /* Reserved, must be zero */
};
/* Flags */
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index dfea2d44048..4ea4f40bf89 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -110,10 +110,10 @@
* usually used for memory allocation, efficient loop counters, and array
* indexes. The types are similar to the size_t type in the C library and are
* required because there is no C type that consistently represents the native
- * data width.
+ * data width. ACPI_SIZE is needed because there is no guarantee that a
+ * kernel-level C library is present.
*
* ACPI_SIZE 16/32/64-bit unsigned value
- * ACPI_NATIVE_UINT 16/32/64-bit unsigned value
* ACPI_NATIVE_INT 16/32/64-bit signed value
*
*/
@@ -147,9 +147,9 @@ typedef int INT32;
/*! [End] no source code translation !*/
-typedef u64 acpi_native_uint;
typedef s64 acpi_native_int;
+typedef u64 acpi_size;
typedef u64 acpi_io_address;
typedef u64 acpi_physical_address;
@@ -186,9 +186,9 @@ typedef int INT32;
/*! [End] no source code translation !*/
-typedef u32 acpi_native_uint;
typedef s32 acpi_native_int;
+typedef u32 acpi_size;
typedef u32 acpi_io_address;
typedef u32 acpi_physical_address;
@@ -202,10 +202,6 @@ typedef u32 acpi_physical_address;
#error unknown ACPI_MACHINE_WIDTH
#endif
-/* Variable-width type, used instead of clib size_t */
-
-typedef acpi_native_uint acpi_size;
-
/*******************************************************************************
*
* OS-dependent and compiler-dependent types
@@ -219,7 +215,7 @@ typedef acpi_native_uint acpi_size;
/* Value returned by acpi_os_get_thread_id */
#ifndef acpi_thread_id
-#define acpi_thread_id acpi_native_uint
+#define acpi_thread_id acpi_size
#endif
/* Object returned from acpi_os_create_lock */
@@ -231,7 +227,7 @@ typedef acpi_native_uint acpi_size;
/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
#ifndef acpi_cpu_flags
-#define acpi_cpu_flags acpi_native_uint
+#define acpi_cpu_flags acpi_size
#endif
/* Object returned from acpi_os_create_cache */
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index b42cadf0730..69f8888771f 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -172,7 +172,7 @@ char *acpi_ut_strstr(char *string1, char *string2);
void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count);
-void *acpi_ut_memset(void *dest, acpi_native_uint value, acpi_size count);
+void *acpi_ut_memset(void *dest, u8 value, acpi_size count);
int acpi_ut_to_upper(int c);
@@ -245,41 +245,45 @@ void acpi_ut_track_stack_ptr(void);
void
acpi_ut_trace(u32 line_number,
- const char *function_name, char *module_name, u32 component_id);
+ const char *function_name,
+ const char *module_name, u32 component_id);
void
acpi_ut_trace_ptr(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, void *pointer);
+ const char *module_name, u32 component_id, void *pointer);
void
acpi_ut_trace_u32(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, u32 integer);
+ const char *module_name, u32 component_id, u32 integer);
void
acpi_ut_trace_str(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, char *string);
+ const char *module_name, u32 component_id, char *string);
void
acpi_ut_exit(u32 line_number,
- const char *function_name, char *module_name, u32 component_id);
+ const char *function_name,
+ const char *module_name, u32 component_id);
void
acpi_ut_status_exit(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, acpi_status status);
+ const char *module_name,
+ u32 component_id, acpi_status status);
void
acpi_ut_value_exit(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, acpi_integer value);
+ const char *module_name,
+ u32 component_id, acpi_integer value);
void
acpi_ut_ptr_exit(u32 line_number,
const char *function_name,
- char *module_name, u32 component_id, u8 * ptr);
+ const char *module_name, u32 component_id, u8 *ptr);
void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
@@ -297,33 +301,35 @@ void ACPI_INTERNAL_VAR_XFACE
acpi_ut_debug_print(u32 requested_debug_level,
u32 line_number,
const char *function_name,
- char *module_name,
- u32 component_id, char *format, ...) ACPI_PRINTF_LIKE(6);
+ const char *module_name,
+ u32 component_id,
+ const char *format, ...) ACPI_PRINTF_LIKE(6);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_debug_print_raw(u32 requested_debug_level,
u32 line_number,
const char *function_name,
- char *module_name,
+ const char *module_name,
u32 component_id,
- char *format, ...) ACPI_PRINTF_LIKE(6);
+ const char *format, ...) ACPI_PRINTF_LIKE(6);
void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_error(char *module_name,
- u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
+acpi_ut_error(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_exception(char *module_name,
+acpi_ut_exception(const char *module_name,
u32 line_number,
- acpi_status status, char *format, ...) ACPI_PRINTF_LIKE(4);
+ acpi_status status,
+ const char *format, ...) ACPI_PRINTF_LIKE(4);
void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_warning(char *module_name,
- u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
+acpi_ut_warning(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_info(char *module_name,
- u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
+acpi_ut_info(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
/*
* utdelete - Object deletion and reference counts
@@ -376,13 +382,14 @@ acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest);
/*
* utobject - internal object create/delete/cache routines
*/
-union acpi_operand_object *acpi_ut_create_internal_object_dbg(char *module_name,
+union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char
+ *module_name,
u32 line_number,
u32 component_id,
acpi_object_type
type);
-void *acpi_ut_allocate_object_desc_dbg(char *module_name,
+void *acpi_ut_allocate_object_desc_dbg(const char *module_name,
u32 line_number, u32 component_id);
#define acpi_ut_create_internal_object(t) acpi_ut_create_internal_object_dbg (_acpi_module_name,__LINE__,_COMPONENT,t)
@@ -476,7 +483,7 @@ u8 acpi_ut_valid_acpi_name(u32 name);
acpi_name acpi_ut_repair_name(char *name);
-u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position);
+u8 acpi_ut_valid_acpi_char(char character, u32 position);
acpi_status
acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer);
@@ -543,26 +550,29 @@ acpi_status
acpi_ut_initialize_buffer(struct acpi_buffer *buffer,
acpi_size required_length);
-void *acpi_ut_allocate(acpi_size size, u32 component, char *module, u32 line);
+void *acpi_ut_allocate(acpi_size size,
+ u32 component, const char *module, u32 line);
void *acpi_ut_allocate_zeroed(acpi_size size,
- u32 component, char *module, u32 line);
+ u32 component, const char *module, u32 line);
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
void *acpi_ut_allocate_and_track(acpi_size size,
- u32 component, char *module, u32 line);
+ u32 component, const char *module, u32 line);
void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
- u32 component, char *module, u32 line);
+ u32 component,
+ const char *module, u32 line);
void
-acpi_ut_free_and_track(void *address, u32 component, char *module, u32 line);
+acpi_ut_free_and_track(void *address,
+ u32 component, const char *module, u32 line);
#ifdef ACPI_FUTURE_USAGE
void acpi_ut_dump_allocation_info(void);
#endif /* ACPI_FUTURE_USAGE */
-void acpi_ut_dump_allocations(u32 component, char *module);
+void acpi_ut_dump_allocations(u32 component, const char *module);
acpi_status
acpi_ut_create_list(char *list_name,
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 06ebb6ef72a..3795590e152 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -255,7 +255,7 @@ extern void acpi_processor_unregister_performance(struct
int acpi_processor_notify_smm(struct module *calling_module);
/* for communication between multiple parts of the processor kernel module */
-extern struct acpi_processor *processors[NR_CPUS];
+DECLARE_PER_CPU(struct acpi_processor *, processors);
extern struct acpi_processor_errata errata;
void arch_acpi_processor_init_pdc(struct acpi_processor *pr);
diff --git a/include/acpi/reboot.h b/include/acpi/reboot.h
index 8857f57e0b7..0419184ce88 100644
--- a/include/acpi/reboot.h
+++ b/include/acpi/reboot.h
@@ -1,9 +1,11 @@
+#ifndef __ACPI_REBOOT_H
+#define __ACPI_REBOOT_H
+
+#ifdef CONFIG_ACPI
+extern void acpi_reboot(void);
+#else
+static inline void acpi_reboot(void) { }
+#endif
-/*
- * Dummy placeholder to make the EFI patches apply to the x86 tree.
- * Andrew/Len, please just kill this file if you encounter it.
- */
-#ifndef acpi_reboot
-# define acpi_reboot() do { } while (0)
#endif
diff --git a/include/asm-alpha/smp.h b/include/asm-alpha/smp.h
index 286e1d844f6..544c69af816 100644
--- a/include/asm-alpha/smp.h
+++ b/include/asm-alpha/smp.h
@@ -47,12 +47,13 @@ extern struct cpuinfo_alpha cpu_data[NR_CPUS];
extern int smp_num_cpus;
#define cpu_possible_map cpu_present_map
-int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
#else /* CONFIG_SMP */
#define hard_smp_processor_id() 0
-#define smp_call_function_on_cpu(func,info,retry,wait,cpu) ({ 0; })
+#define smp_call_function_on_cpu(func,info,wait,cpu) ({ 0; })
#endif /* CONFIG_SMP */
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
index 1551fc24eb4..400ec10014b 100644
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -75,6 +75,10 @@
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
#define AT91_MCI_TRTYP_STREAM (2 << 19)
+#define AT91_MCI_BLKR 0x18 /* Block Register */
+#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
+#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
+
#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
#define AT91_MCR_RDR 0x30 /* Receive Data Register */
#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index c2b13c28015..2001e81f226 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -39,10 +39,14 @@
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
+#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
@@ -97,6 +101,7 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
index bac83adb505..6f14d9053ac 100644
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -118,7 +118,7 @@
#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
index a641686b6c3..ddbd4873c84 100644
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -106,6 +106,11 @@
#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
+#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
+#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
+#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
+
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
index c8934fe34dc..889872a3f2a 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -6,6 +6,8 @@
* Common definitions.
* Based on AT91SAM9260 datasheet revision A (Preliminary).
*
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -123,5 +125,14 @@
#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
index 16d2832f6c0..622e56f81d4 100644
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -110,6 +110,6 @@
#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index dc189f01c5b..94de788da76 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -36,6 +36,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
/* USB Device */
struct at91_udc_data {
@@ -45,6 +46,9 @@ struct at91_udc_data {
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
/* Compact Flash */
struct at91_cf_data {
u8 irq_pin; /* I/O IRQ */
@@ -73,7 +77,7 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
#define eth_platform_data at91_eth_data
#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 7145166826a..52df794205c 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -21,6 +21,7 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
#define ARCH_ID_AT91CAP9 0x039A03A0
@@ -63,6 +64,12 @@ static inline unsigned long at91_arch_identify(void)
#define cpu_is_at91sam9260() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9261
#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
#else
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 2c826d8247a..016a3a3f663 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -18,7 +18,7 @@
#if defined(CONFIG_ARCH_AT91RM9200)
#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260)
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_ARCH_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index f1933b0fa43..298d8313cda 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -27,14 +27,29 @@
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
+#define AT91SAM9_MASTER_CLOCK 99300000
+#endif
+
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
#define AT91SAM9_MASTER_CLOCK 99959500
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
@@ -42,6 +57,11 @@
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK 132096000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
index daad8ee2d19..74610c2c63d 100644
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ b/include/asm-arm/arch-ebsa285/hardware.h
@@ -14,7 +14,6 @@
#include <asm/arch/memory.h>
-#ifdef CONFIG_ARCH_FOOTBRIDGE
/* Virtual Physical Size
* 0xff800000 0x40000000 1MB X-Bus
* 0xff000000 0x7c000000 1MB PCI I/O space
@@ -50,31 +49,6 @@
#define PCIMEM_SIZE 0x01000000
#define PCIMEM_BASE 0xf0000000
-#elif defined(CONFIG_ARCH_CO285)
-/*
- * This is the COEBSA285 cut-down mapping
- */
-#define PCIMEM_SIZE 0x80000000
-#define PCIMEM_BASE 0x80000000
-
-#define WFLUSH_SIZE 0x01000000
-#define WFLUSH_BASE 0x7d000000
-
-#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE 0x7cf00000
-
-#define XBUS_SIZE 0x00020000
-#define XBUS_BASE 0x7cee0000
-
-#define PCIO_SIZE 0x00010000
-#define PCIO_BASE 0x7ced0000
-
-#else
-
-#error "Undefined footbridge architecture"
-
-#endif
-
#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
#define XBUS_LED_AMBER (1 << 0)
#define XBUS_LED_GREEN (1 << 1)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
index cbd7ae64bcc..9019a3bf5ab 100644
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ b/include/asm-arm/arch-ebsa285/memory.h
@@ -42,8 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long);
#endif
-#if defined(CONFIG_ARCH_FOOTBRIDGE)
-
/* Task size and page offset at 3GB */
#define TASK_SIZE UL(0xbf000000)
#define PAGE_OFFSET UL(0xc0000000)
@@ -53,23 +51,6 @@ extern unsigned long __bus_to_virt(unsigned long);
*/
#define FLUSH_BASE 0xf9000000
-#elif defined(CONFIG_ARCH_CO285)
-
-/* Task size and page offset at 1.5GB */
-#define TASK_SIZE UL(0x5f000000)
-#define PAGE_OFFSET UL(0x60000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE 0x7e000000
-
-#else
-
-#error "Undefined footbridge architecture"
-
-#endif
-
/*
* Physical DRAM offset.
*/
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
index 02598200997..e487d7e8c8a 100644
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ b/include/asm-arm/arch-ebsa285/vmalloc.h
@@ -7,8 +7,4 @@
*/
-#ifdef CONFIG_ARCH_FOOTBRIDGE
#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
-#else
-#define VMALLOC_END (PAGE_OFFSET + 0x20000000)
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
index adffb6acf42..6542ca5e8c3 100644
--- a/include/asm-arm/arch-imx/hardware.h
+++ b/include/asm-arm/arch-imx/hardware.h
@@ -73,14 +73,6 @@
*/
extern void imx_gpio_mode( int gpio_mode );
-/* get frequencies in Hz */
-extern unsigned int imx_get_system_clk(void);
-extern unsigned int imx_get_mcu_clk(void);
-extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */
-extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */
-extern unsigned int imx_get_perclk3(void); /* SSI */
-extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/
- /* I2C, DMA */
#endif
#define MAXIRQNUM 62
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h
index 5b1066da4e1..44d89c35539 100644
--- a/include/asm-arm/arch-imx/imx-dma.h
+++ b/include/asm-arm/arch-imx/imx-dma.h
@@ -88,7 +88,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name);
void imx_dma_free(imx_dmach_t dma_ch);
-int imx_dma_request_by_prio(imx_dmach_t *pdma_ch, const char *name, imx_dma_prio prio);
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
#endif /* _ASM_ARCH_IMX_DMA_H */
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
index 3a685e1780e..d54eb1d4802 100644
--- a/include/asm-arm/arch-imx/imx-uart.h
+++ b/include/asm-arm/arch-imx/imx-uart.h
@@ -4,6 +4,8 @@
#define IMXUART_HAVE_RTSCTS (1<<0)
struct imxuart_platform_data {
+ int (*init)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
};
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h
index 2e15da53ff7..d79846fbb39 100644
--- a/include/asm-arm/arch-iop13xx/dma.h
+++ b/include/asm-arm/arch-iop13xx/dma.h
@@ -1,3 +1,3 @@
#ifndef _IOP13XX_DMA_H
-#define _IOP13XX_DMA_H_
+#define _IOP13XX_DMA_H
#endif
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h
new file mode 100644
index 00000000000..708f4ec9db1
--- /dev/null
+++ b/include/asm-arm/arch-iop32x/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP32X_GPIO_H
+#define __ASM_ARCH_IOP32X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h
new file mode 100644
index 00000000000..ddd55bba9bb
--- /dev/null
+++ b/include/asm-arm/arch-iop33x/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP33X_GPIO_H
+#define __ASM_ARCH_IOP33X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
new file mode 100644
index 00000000000..c0100cc7981
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN 12
+#define FSG_SCL_PIN 13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV 3
+#define FSG_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN 6
+#define FSG_PCI_INTB_PIN 7
+#define FSG_PCI_INTC_PIN 5
+
+/* Buttons */
+
+#define FSG_SB_GPIO 4 /* sync button */
+#define FSG_RB_GPIO 9 /* reset button */
+#define FSG_UB_GPIO 10 /* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT 0
+#define FSG_LED_WAN_BIT 1
+#define FSG_LED_SATA_BIT 2
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index 73e8dc36f6a..fa723a62785 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -45,5 +45,6 @@
#include "nslu2.h"
#include "nas100d.h"
#include "dsmg600.h"
+#include "fsg.h"
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
index 11801605047..674af4a8414 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -128,4 +128,11 @@
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
+
#endif
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
new file mode 100644
index 00000000000..f55fb8ad9ee
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-kirkwood/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/kirkwood.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
+ ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
new file mode 100644
index 00000000000..fc6a43d9355
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-kirkwood/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/kirkwood.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+ bne 1001f
+
+ @ if no low interrupts set, check high interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ mov \irqnr, #63
+ ands \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+1001: clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
new file mode 100644
index 00000000000..e695719771a
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-kirkwood/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
new file mode 100644
index 00000000000..0ef6e95f5d5
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-kirkwood/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+ + KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
new file mode 100644
index 00000000000..2e7b5da6335
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * include/asm-arm/arch-kirkwood/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h" /* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM 0
+#define IRQ_KIRKWOOD_BRIDGE 1
+#define IRQ_KIRKWOOD_HOST2CPU 2
+#define IRQ_KIRKWOOD_CPU2HOST 3
+#define IRQ_KIRKWOOD_XOR_00 5
+#define IRQ_KIRKWOOD_XOR_01 6
+#define IRQ_KIRKWOOD_XOR_10 7
+#define IRQ_KIRKWOOD_XOR_11 8
+#define IRQ_KIRKWOOD_PCIE 9
+#define IRQ_KIRKWOOD_GE00_SUM 11
+#define IRQ_KIRKWOOD_GE01_SUM 15
+#define IRQ_KIRKWOOD_USB 19
+#define IRQ_KIRKWOOD_SATA 21
+#define IRQ_KIRKWOOD_CRYPTO 22
+#define IRQ_KIRKWOOD_SPI 23
+#define IRQ_KIRKWOOD_I2S 24
+#define IRQ_KIRKWOOD_TS_0 26
+#define IRQ_KIRKWOOD_SDIO 28
+#define IRQ_KIRKWOOD_TWSI 29
+#define IRQ_KIRKWOOD_AVB 30
+#define IRQ_KIRKWOOD_TDMI 31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0 33
+#define IRQ_KIRKWOOD_UART_1 34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 00000000000..bb31b315c35
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * include/asm-arm/arch-kirkwood/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe I/O space
+ * f3000000 NAND controller address window
+ *
+ * virt phys size
+ * fee00000 f1000000 1M on-chip peripheral registers
+ * fef00000 f2000000 1M PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
+ * is the minimal window size
+ */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX 50
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
new file mode 100644
index 00000000000..e5108f408ce
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-kirkwood/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
new file mode 100644
index 00000000000..8dde7e37985
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-kirkwood/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
new file mode 100644
index 00000000000..82122e134e3
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/timex.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/arch-kirkwood/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define KIRKWOOD_TCLK 166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
new file mode 100644
index 00000000000..a9062b6d768
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-kirkwood/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/kirkwood.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
new file mode 100644
index 00000000000..41852c6e77f
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-kirkwood/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
new file mode 100644
index 00000000000..585502e9651
--- /dev/null
+++ b/include/asm-arm/arch-loki/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-loki/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/loki.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =LOKI_REGS_PHYS_BASE
+ ldrne \rx, =LOKI_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/include/asm-arm/arch-loki/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
new file mode 100644
index 00000000000..693257cdbeb
--- /dev/null
+++ b/include/asm-arm/arch-loki/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * include/asm-arm/arch-loki/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/loki.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #IRQ_CAUSE_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_OFF]
+ mov \irqnr, #0
+ ands \irqstat, \irqstat, \tmp
+ clzne \irqnr, \irqstat
+ rsbne \irqnr, \irqnr, #31
+ .endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
new file mode 100644
index 00000000000..f65b01c733b
--- /dev/null
+++ b/include/asm-arm/arch-loki/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * include/asm-arm/arch-loki/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
new file mode 100644
index 00000000000..e7418a915e7
--- /dev/null
+++ b/include/asm-arm/arch-loki/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-loki/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+ + LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
new file mode 100644
index 00000000000..7e497143807
--- /dev/null
+++ b/include/asm-arm/arch-loki/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * include/asm-arm/arch-loki/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h" /* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL 0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL 1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL 2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL 3
+#define IRQ_LOKI_COM_A_ERR 6
+#define IRQ_LOKI_COM_A_IN 7
+#define IRQ_LOKI_COM_A_OUT 8
+#define IRQ_LOKI_COM_B_ERR 9
+#define IRQ_LOKI_COM_B_IN 10
+#define IRQ_LOKI_COM_B_OUT 11
+#define IRQ_LOKI_DMA_A 12
+#define IRQ_LOKI_DMA_B 13
+#define IRQ_LOKI_SAS_A 14
+#define IRQ_LOKI_SAS_B 15
+#define IRQ_LOKI_DDR 16
+#define IRQ_LOKI_XOR 17
+#define IRQ_LOKI_BRIDGE 18
+#define IRQ_LOKI_PCIE_A_ERR 20
+#define IRQ_LOKI_PCIE_A_INT 21
+#define IRQ_LOKI_PCIE_B_ERR 22
+#define IRQ_LOKI_PCIE_B_INT 23
+#define IRQ_LOKI_GBE_A_INT 24
+#define IRQ_LOKI_GBE_B_INT 25
+#define IRQ_LOKI_DEV_ERR 26
+#define IRQ_LOKI_UART0 27
+#define IRQ_LOKI_UART1 28
+#define IRQ_LOKI_TWSI 29
+#define IRQ_LOKI_GPIO_23_0 30
+#define IRQ_LOKI_GPIO_25_24 31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START 32
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h
new file mode 100644
index 00000000000..5dd05ee0a4e
--- /dev/null
+++ b/include/asm-arm/arch-loki/loki.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-arm/arch-loki/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000 on-chip peripheral registers
+ * e0000000 PCIe 0 Memory space
+ * e8000000 PCIe 1 Memory space
+ * f0000000 PCIe 0 I/O space
+ * f0100000 PCIe 1 I/O space
+ *
+ * virt phys size
+ * fed00000 d0000000 1M on-chip peripheral registers
+ * fee00000 f0000000 64K PCIe 0 I/O space
+ * fef00000 f0100000 64K PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE 0xd0000000
+#define LOKI_REGS_VIRT_BASE 0xfed00000
+#define LOKI_REGS_SIZE SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE0_IO_SIZE SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE1_IO_SIZE SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define LOKI_PCIE0_MEM_SIZE SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define LOKI_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x) (DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX 8
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
new file mode 100644
index 00000000000..835101e4987
--- /dev/null
+++ b/include/asm-arm/arch-loki/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-loki/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
new file mode 100644
index 00000000000..a3568ac8ec3
--- /dev/null
+++ b/include/asm-arm/arch-loki/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-loki/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/loki.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
new file mode 100644
index 00000000000..940014f97ca
--- /dev/null
+++ b/include/asm-arm/arch-loki/timex.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/arch-loki/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define LOKI_TCLK 180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
new file mode 100644
index 00000000000..89a0cf88d3a
--- /dev/null
+++ b/include/asm-arm/arch-loki/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-loki/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/loki.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
new file mode 100644
index 00000000000..f5be0622049
--- /dev/null
+++ b/include/asm-arm/arch-loki/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-loki/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
index 565430cfaa7..e62a108b185 100644
--- a/include/asm-arm/arch-msm/irqs.h
+++ b/include/asm-arm/arch-msm/irqs.h
@@ -15,6 +15,7 @@
*/
#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
/* MSM ARM11 Interrupt Numbers */
/* See 80-VE113-1 A, pp219-221 */
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
index 154b23fb359..8724487ab4c 100644
--- a/include/asm-arm/arch-msm/timex.h
+++ b/include/asm-arm/arch-msm/timex.h
@@ -14,6 +14,7 @@
*/
#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
#define CLOCK_TICK_RATE 1000000
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
new file mode 100644
index 00000000000..d0595bd645e
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-mv78xx0/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/mv78xx0.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MV78XX0_REGS_PHYS_BASE
+ ldrne \rx, =MV78XX0_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
new file mode 100644
index 00000000000..e9a606b1266
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-mv78xx0/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/mv78xx0.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
new file mode 100644
index 00000000000..8e17926086c
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-mv78xx0/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
new file mode 100644
index 00000000000..415d4c98e3d
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/io.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-mv78xx0/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+ + MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
new file mode 100644
index 00000000000..75930450cd6
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * include/asm-arm/arch-mv78xx0/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h" /* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR 0
+#define IRQ_MV78XX0_SPI 1
+#define IRQ_MV78XX0_I2C_0 2
+#define IRQ_MV78XX0_I2C_1 3
+#define IRQ_MV78XX0_IDMA_0 4
+#define IRQ_MV78XX0_IDMA_1 5
+#define IRQ_MV78XX0_IDMA_2 6
+#define IRQ_MV78XX0_IDMA_3 7
+#define IRQ_MV78XX0_TIMER_0 8
+#define IRQ_MV78XX0_TIMER_1 9
+#define IRQ_MV78XX0_TIMER_2 10
+#define IRQ_MV78XX0_TIMER_3 11
+#define IRQ_MV78XX0_UART_0 12
+#define IRQ_MV78XX0_UART_1 13
+#define IRQ_MV78XX0_UART_2 14
+#define IRQ_MV78XX0_UART_3 15
+#define IRQ_MV78XX0_USB_0 16
+#define IRQ_MV78XX0_USB_1 17
+#define IRQ_MV78XX0_USB_2 18
+#define IRQ_MV78XX0_CRYPTO 19
+#define IRQ_MV78XX0_SDIO_0 20
+#define IRQ_MV78XX0_SDIO_1 21
+#define IRQ_MV78XX0_XOR_0 22
+#define IRQ_MV78XX0_XOR_1 23
+#define IRQ_MV78XX0_I2S_0 24
+#define IRQ_MV78XX0_I2S_1 25
+#define IRQ_MV78XX0_SATA 26
+#define IRQ_MV78XX0_TDMI 27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00 32
+#define IRQ_MV78XX0_PCIE_01 33
+#define IRQ_MV78XX0_PCIE_02 34
+#define IRQ_MV78XX0_PCIE_03 35
+#define IRQ_MV78XX0_PCIE_10 36
+#define IRQ_MV78XX0_PCIE_11 37
+#define IRQ_MV78XX0_PCIE_12 38
+#define IRQ_MV78XX0_PCIE_13 39
+#define IRQ_MV78XX0_GE00_SUM 40
+#define IRQ_MV78XX0_GE00_RX 41
+#define IRQ_MV78XX0_GE00_TX 42
+#define IRQ_MV78XX0_GE00_MISC 43
+#define IRQ_MV78XX0_GE01_SUM 44
+#define IRQ_MV78XX0_GE01_RX 45
+#define IRQ_MV78XX0_GE01_TX 46
+#define IRQ_MV78XX0_GE01_MISC 47
+#define IRQ_MV78XX0_GE10_SUM 48
+#define IRQ_MV78XX0_GE10_RX 49
+#define IRQ_MV78XX0_GE10_TX 50
+#define IRQ_MV78XX0_GE10_MISC 51
+#define IRQ_MV78XX0_GE11_SUM 52
+#define IRQ_MV78XX0_GE11_RX 53
+#define IRQ_MV78XX0_GE11_TX 54
+#define IRQ_MV78XX0_GE11_MISC 55
+#define IRQ_MV78XX0_GPIO_0_7 56
+#define IRQ_MV78XX0_GPIO_8_15 57
+#define IRQ_MV78XX0_GPIO_16_23 58
+#define IRQ_MV78XX0_GPIO_24_31 59
+#define IRQ_MV78XX0_DB_IN 60
+#define IRQ_MV78XX0_DB_OUT 61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
new file mode 100644
index 00000000000..721a6b185b9
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/memory.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-mv78xx0/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h
new file mode 100644
index 00000000000..9f5d83c73fa
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/arch-mv78xx0/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ * MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000 PCIe Memory space
+ * f0800000 PCIe #0 I/O space
+ * f0900000 PCIe #1 I/O space
+ * f0a00000 PCIe #2 I/O space
+ * f0b00000 PCIe #3 I/O space
+ * f0c00000 PCIe #4 I/O space
+ * f0d00000 PCIe #5 I/O space
+ * f0e00000 PCIe #6 I/O space
+ * f0f00000 PCIe #7 I/O space
+ * f1000000 on-chip peripheral registers
+ *
+ * virt phys size
+ * fe400000 f102x000 16K core-specific peripheral registers
+ * fe700000 f0800000 1M PCIe #0 I/O space
+ * fe800000 f0900000 1M PCIe #1 I/O space
+ * fe900000 f0a00000 1M PCIe #2 I/O space
+ * fea00000 f0b00000 1M PCIe #3 I/O space
+ * feb00000 f0c00000 1M PCIe #4 I/O space
+ * fec00000 f0d00000 1M PCIe #5 I/O space
+ * fed00000 f0e00000 1M PCIe #6 I/O space
+ * fee00000 f0f00000 1M PCIe #7 I/O space
+ * fef00000 f1000000 1M on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_SIZE SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE 0xf1000000
+#define MV78XX0_REGS_VIRT_BASE 0xfef00000
+#define MV78XX0_REGS_SIZE SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE 0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
+#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
+#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
+#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
+#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX 32
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
new file mode 100644
index 00000000000..7eb47d376db
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/system.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-mv78xx0/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
new file mode 100644
index 00000000000..a854b1ccbd0
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/timex.h
@@ -0,0 +1,9 @@
+/*
+ * include/asm-arm/arch-mv78xx0/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
new file mode 100644
index 00000000000..3bfe0a293ef
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-mv78xx0/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/mv78xx0.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
new file mode 100644
index 00000000000..f2c51219757
--- /dev/null
+++ b/include/asm-arm/arch-mv78xx0/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-mv78xx0/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h
new file mode 100644
index 00000000000..61e66dac90e
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-mx27ads.h
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+
+/* external interrupt multiplexer */
+#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+
+#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
+#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE
+#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1)
+#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2)
+
+#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \
+ MXC_MAX_VIRTUAL_INTS)
+
+/*
+ * MXC UART EVB board level configurations
+ */
+
+#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000)
+#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000)
+#define MXC_LL_EXTUART_16BIT_BUS
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * @name Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE SZ_128M
+
+/*
+ * PBC Controller parameters
+ */
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
+
+/*
+ * PBC Interupt name definitions
+ */
+#define PBC_GPIO1_0 0
+#define PBC_GPIO1_1 1
+#define PBC_GPIO1_2 2
+#define PBC_GPIO1_3 3
+#define PBC_GPIO1_4 4
+#define PBC_GPIO1_5 5
+
+#define PBC_INTR_MAX_NUM 6
+#define PBC_INTR_SHARED_MAX_NUM 8
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH 0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 set address.
+ */
+#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 clear address.
+ */
+#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 clear address.
+ */
+#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 4 clear address.
+ */
+#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
+/*PBC_ADDR_SH
+ * PBC Board status register 1.
+ */
+#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt status register.
+ */
+#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt current status register.
+ */
+#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register set address.
+ */
+#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register clear address.
+ */
+#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
+/*
+ * External UART A.
+ */
+#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Status.
+ */
+#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Set.
+ */
+#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Clear.
+ */
+#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller IO base address.
+ */
+#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller Memory base address.
+ */
+#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller DMA base address.
+ */
+#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
+
+/* PBC Board Version Register bit definition */
+#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */
+#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */
+#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */
+#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */
+#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */
+#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
+
+/* PBC Board Control Register 2 bit definitions */
+#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */
+#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */
+#define PBC_BCTRL2_ATAFEC_EN 0X0010
+#define PBC_BCTRL2_ATAFEC_SEL 0X0020
+#define PBC_BCTRL2_ATA_EN 0X0040
+#define PBC_BCTRL2_IRDA_SD 0X0080
+#define PBC_BCTRL2_IRDA_EN 0X0100
+#define PBC_BCTRL2_CCTL10 0X0200
+#define PBC_BCTRL2_CCTL11 0X0400
+
+/* PBC Board Control Register 3 bit definitions */
+#define PBC_BCTRL3_HSH_EN 0X0020
+#define PBC_BCTRL3_FSH_MOD 0X0040
+#define PBC_BCTRL3_OTG_HS_EN 0X0080
+#define PBC_BCTRL3_OTG_VBUS_EN 0X0100
+#define PBC_BCTRL3_FSH_VBUS_EN 0X0200
+#define PBC_BCTRL3_USB_OTG_ON 0X0800
+#define PBC_BCTRL3_USB_FSH_ON 0X1000
+
+/* PBC Board Control Register 4 bit definitions */
+#define PBC_BCTRL4_REGEN_SEL 0X0001
+#define PBC_BCTRL4_USER_OFF 0X0002
+#define PBC_BCTRL4_VIB_EN 0X0004
+#define PBC_BCTRL4_PWRGT1_EN 0X0008
+#define PBC_BCTRL4_PWRGT2_EN 0X0010
+#define PBC_BCTRL4_STDBY_PRI 0X0020
+
+#ifndef __ASSEMBLY__
+/*
+ * Enumerations for SD cards and memory stick card. This corresponds to
+ * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
+ */
+enum mxc_card_no {
+ MXC_CARD_SD2 = 0,
+ MXC_CARD_SD3,
+ MXC_CARD_MS,
+ MXC_CARD_SD1,
+ MXC_CARD_MIN = MXC_CARD_SD2,
+ MXC_CARD_MAX = MXC_CARD_SD1,
+};
+#endif
+
+#define MXC_CPLD_VER_1_50 0x01
+
+/*
+ * PBC BSTAT Register bit definitions
+ */
+#define PBC_BSTAT_PRI_INT 0X0001
+#define PBC_BSTAT_USB_BYP 0X0002
+#define PBC_BSTAT_ATA_IOCS16 0X0004
+#define PBC_BSTAT_ATA_CBLID 0X0008
+#define PBC_BSTAT_ATA_DASP 0X0010
+#define PBC_BSTAT_PWR_RDY 0X0020
+#define PBC_BSTAT_SD3_WP 0X0100
+#define PBC_BSTAT_SD2_WP 0X0200
+#define PBC_BSTAT_SD1_WP 0X0400
+#define PBC_BSTAT_SD3_DET 0X0800
+#define PBC_BSTAT_SD2_DET 0X1000
+#define PBC_BSTAT_SD1_DET 0X2000
+#define PBC_BSTAT_MS_DET 0X4000
+#define PBC_BSTAT_SD3_DET_BIT 11
+#define PBC_BSTAT_SD2_DET_BIT 12
+#define PBC_BSTAT_SD1_DET_BIT 13
+#define PBC_BSTAT_MS_DET_BIT 14
+#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
+ ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
+ ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
+ ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
+ 0x0))))
+
+/*
+ * PBC UART Control Register bit definitions
+ */
+#define PBC_UCTRL_DCE_DCD 0X0001
+#define PBC_UCTRL_DCE_DSR 0X0002
+#define PBC_UCTRL_DCE_RI 0X0004
+#define PBC_UCTRL_DTE_DTR 0X0100
+
+/*
+ * PBC UART Status Register bit definitions
+ */
+#define PBC_USTAT_DTE_DCD 0X0001
+#define PBC_USTAT_DTE_DSR 0X0002
+#define PBC_USTAT_DTE_RI 0X0004
+#define PBC_USTAT_DCE_DTR 0X0100
+
+/*
+ * PBC Interupt mask register bit definitions
+ */
+#define PBC_INTR_SD3_R_EN_BIT 4
+#define PBC_INTR_SD2_R_EN_BIT 0
+#define PBC_INTR_SD1_R_EN_BIT 6
+#define PBC_INTR_MS_R_EN_BIT 5
+#define PBC_INTR_SD3_EN_BIT 13
+#define PBC_INTR_SD2_EN_BIT 12
+#define PBC_INTR_MS_EN_BIT 14
+#define PBC_INTR_SD1_EN_BIT 15
+
+#define PBC_INTR_SD2_R_EN 0x0001
+#define PBC_INTR_LOW_BAT 0X0002
+#define PBC_INTR_OTG_FSOVER 0X0004
+#define PBC_INTR_FSH_OVER 0X0008
+#define PBC_INTR_SD3_R_EN 0x0010
+#define PBC_INTR_MS_R_EN 0x0020
+#define PBC_INTR_SD1_R_EN 0x0040
+#define PBC_INTR_FEC_INT 0X0080
+#define PBC_INTR_ENET_INT 0X0100
+#define PBC_INTR_OTGFS_INT 0X0200
+#define PBC_INTR_XUART_INT 0X0400
+#define PBC_INTR_CCTL12 0X0800
+#define PBC_INTR_SD2_EN 0x1000
+#define PBC_INTR_SD3_EN 0x2000
+#define PBC_INTR_MS_EN 0x4000
+#define PBC_INTR_SD1_EN 0x8000
+
+
+
+/* For interrupts like xuart, enet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN)
+#define MXC_MAX_EXP_IO_LINES 16
+
+/*
+ * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
+ *
+ */
+#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15)
+
+/*
+ * This is System IRQ used by CS8900A for interrupt generation
+ * taken from platform.h
+ */
+#define CS8900AIRQ EXPIO_INT_ENET_INT
+/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
+#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300)
+
+#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT)
+
+/*
+* This is used to detect if the CPLD version is for mx27 evb board rev-a
+*/
+#define PBC_CPLD_VERSION_IS_REVA() \
+ ((__raw_readw(PBC_VERSION_REG) & \
+ (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
+ == 0)
+
+/* This is used to active or inactive ata signal in CPLD .
+ * It is dependent with hardware
+ */
+#define PBC_ATA_SIGNAL_ACTIVE() \
+ __raw_writew( \
+ PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+ PBC_BCTRL2_CLEAR_REG)
+
+#define PBC_ATA_SIGNAL_INACTIVE() \
+ __raw_writew( \
+ PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+ PBC_BCTRL2_SET_REG)
+
+#define MXC_BD_LED1 (1 << 5)
+#define MXC_BD_LED2 (1 << 6)
+#define MXC_BD_LED_ON(led) \
+ __raw_writew(led, PBC_BCTRL1_SET_REG)
+#define MXC_BD_LED_OFF(led) \
+ __raw_writew(led, PBC_BCTRL1_CLEAR_REG)
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET (1 << 3)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h
index 8590127760a..1bc6fb0f9a8 100644
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ b/include/asm-arm/arch-mxc/board-mx31ads.h
@@ -109,4 +109,9 @@
#define MXC_MAX_EXP_IO_LINES 16
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h
new file mode 100644
index 00000000000..e4e5cf5ad7d
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-mx31lite.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+
+/*
+ * Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE SZ_128M
+/*
+ * Size of MBX buffer memory
+ */
+#define MXC_MBX_MEM_SIZE SZ_16M
+/*
+ * Size of memory available to kernel
+ */
+#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h
new file mode 100644
index 00000000000..82232ba3c8f
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-pcm037.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
+#define __ASM_ARCH_MXC_BOARD_PCM037_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h
new file mode 100644
index 00000000000..750c62afd90
--- /dev/null
+++ b/include/asm-arm/arch-mxc/board-pcm038.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
+#define __ASM_ARCH_MXC_BOARD_PCM038_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside pcm038_init().
+ *
+ * This example here is for the development board. Refer pcm970-baseboard.c
+ */
+
+extern void pcm970_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h
new file mode 100644
index 00000000000..24caa2b7c91
--- /dev/null
+++ b/include/asm-arm/arch-mxc/clock.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_CLOCK_H__
+#define __ASM_ARCH_MXC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ int id;
+ /* Source clock this clk depends on */
+ struct clk *parent;
+ /* Secondary clock to enable/disable with this clock */
+ struct clk *secondary;
+ /* Reference count of clock enable/disable */
+ __s8 usecount;
+ /* Register bit position for clock's enable/disable control. */
+ u8 enable_shift;
+ /* Register address for clock's enable/disable control. */
+ u32 enable_reg;
+ u32 flags;
+ /* get the current clock rate (always a fresh value) */
+ unsigned long (*get_rate) (struct clk *);
+ /* Function ptr to set the clock to a new rate. The rate must match a
+ supported rate returned from round_rate. Leave blank if clock is not
+ programmable */
+ int (*set_rate) (struct clk *, unsigned long);
+ /* Function ptr to round the requested clock rate to the nearest
+ supported rate that is less than or equal to the requested rate. */
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ /* Function ptr to enable the clock. Leave blank if clock can not
+ be gated. */
+ int (*enable) (struct clk *);
+ /* Function ptr to disable the clock. Leave blank if clock can not
+ be gated. */
+ void (*disable) (struct clk *);
+ /* Function ptr to set the parent clock of the clock. */
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h
index 23b4350edbd..a6d2e24aab1 100644
--- a/include/asm-arm/arch-mxc/common.h
+++ b/include/asm-arm/arch-mxc/common.h
@@ -11,10 +11,10 @@
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
-struct sys_timer;
-
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
-extern struct sys_timer mxc_timer;
+extern void mxc_timer_init(const char *clk_timer);
+extern int mxc_clocks_init(unsigned long fref);
+extern int mxc_register_gpios(void);
#endif
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
new file mode 100644
index 00000000000..575087f8561
--- /dev/null
+++ b/include/asm-arm/arch-mxc/debug-macro.S
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/arch-imx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/arch/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <asm/arch/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <asm/arch/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <asm/arch/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <asm/arch/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <asm/arch/board-pcm038.h>
+#endif
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MXC_LL_UART_PADDR @ physical
+ ldrne \rx, =MXC_LL_UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
new file mode 100644
index 00000000000..d393e15f5a6
--- /dev/null
+++ b/include/asm-arm/arch-mxc/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <asm/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+ void __iomem *base;
+ int irq;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
index e87ff0679d5..37cddbaaade 100644
--- a/include/asm-arm/arch-mxc/hardware.h
+++ b/include/asm-arm/arch-mxc/hardware.h
@@ -1,11 +1,20 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_HARDWARE_H__
@@ -17,15 +26,12 @@
# include <asm/arch/mx31.h>
#endif
-#include <asm/arch/mxc.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_MACH_MX31ADS
-# include <asm/arch/board-mx31ads.h>
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+# include <asm/arch/mx27.h>
+# endif
#endif
+#include <asm/arch/mxc.h>
+
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h
new file mode 100644
index 00000000000..315bffadafd
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iim.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT 0x0000
+#define MXC_IIMSTATM 0x0004
+#define MXC_IIMERR 0x0008
+#define MXC_IIMEMASK 0x000C
+#define MXC_IIMFCTL 0x0010
+#define MXC_IIMUA 0x0014
+#define MXC_IIMLA 0x0018
+#define MXC_IIMSDAT 0x001C
+#define MXC_IIMPREV 0x0020
+#define MXC_IIMSREV 0x0024
+#define MXC_IIMPRG_P 0x0028
+#define MXC_IIMSCS0 0x002C
+#define MXC_IIMSCS1 0x0030
+#define MXC_IIMSCS2 0x0034
+#define MXC_IIMSCS3 0x0038
+#define MXC_IIMFBAC0 0x0800
+#define MXC_IIMJAC 0x0804
+#define MXC_IIMHWV1 0x0808
+#define MXC_IIMHWV2 0x080C
+#define MXC_IIMHAB0 0x0810
+#define MXC_IIMHAB1 0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC 0x0814
+#define MXC_IIMPREV_FUSE 0x0818
+#define MXC_IIMSREV_FUSE 0x081C
+#define MXC_IIMSJC_CHALL_0 0x0820
+#define MXC_IIMSJC_CHALL_7 0x083C
+#define MXC_IIMFB0UC17 0x0840
+#define MXC_IIMFB0UC255 0x0BFC
+#define MXC_IIMFBAC1 0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID 0x0C04
+#define MXC_IIMKEY0 0x0C04
+#define MXC_IIMKEY20 0x0C54
+#define MXC_IIMSJC_RESP_0 0x0C58
+#define MXC_IIMSJC_RESP_7 0x0C74
+#define MXC_IIMFB1UC30 0x0C78
+#define MXC_IIMFB1UC255 0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h
new file mode 100644
index 00000000000..83fb72c4048
--- /dev/null
+++ b/include/asm-arm/arch-mxc/imx-uart.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+ int (*init)(struct platform_device *pdev);
+ int (*exit)(struct platform_device *pdev);
+ unsigned int flags;
+};
+
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
+
+#endif
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
new file mode 100644
index 00000000000..076d37b38eb
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _MXC_GPIO_MX1_MX2_H
+#define _MXC_GPIO_MX1_MX2_H
+
+#include <linux/io.h>
+
+#define MXC_GPIO_ALLOC_MODE_NORMAL 0
+#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1
+#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2
+#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4
+#define MXC_GPIO_ALLOC_MODE_RELEASE 8
+
+/*
+ * GPIO Module and I/O Multiplexer
+ * x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x) (0x00 + ((x) << 8))
+#define MXC_OCR1(x) (0x04 + ((x) << 8))
+#define MXC_OCR2(x) (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x) (0x1c + ((x) << 8))
+#define MXC_GIUS(x) (0x20 + ((x) << 8))
+#define MXC_SSR(x) (0x24 + ((x) << 8))
+#define MXC_ICR1(x) (0x28 + ((x) << 8))
+#define MXC_ICR2(x) (0x2c + ((x) << 8))
+#define MXC_IMR(x) (0x30 + ((x) << 8))
+#define MXC_ISR(x) (0x34 + ((x) << 8))
+#define MXC_GPR(x) (0x38 + ((x) << 8))
+#define MXC_SWR(x) (0x3c + ((x) << 8))
+#define MXC_PUEN(x) (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX 3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX 5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT (1 << 8)
+#define GPIO_IN (0 << 8)
+#define GPIO_PUEN (1 << 9)
+
+#define GPIO_PF (1 << 10)
+#define GPIO_AF (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ int alloc_mode, const char *label);
+
+/*-------------------------------------------------------------------------*/
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#ifdef CONFIG_ARCH_MX1
+#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
+#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
+#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
+#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
+#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
+#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
+#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
+#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
+#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
+#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
+#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
+#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
+#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
+#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
+#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
+#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
+#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
+#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
+#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
+#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
+#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
+#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
+#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
+#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
+#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
+#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
+#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
+#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
+#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
+#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
+#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
+#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
+#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
+#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
+#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
+#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
+#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
+#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
+#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
+#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
+#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
+#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
+#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
+#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
+#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
+#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
+#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
+#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
+#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
+#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
+#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
+#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11)
+#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
+#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
+#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
+#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13)
+#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
+#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
+#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
+#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
+#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
+#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
+#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
+#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19)
+#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
+#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
+#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
+#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
+#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
+#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
+#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
+#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31)
+#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6)
+#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16)
+#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17)
+#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18)
+#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19)
+#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20)
+#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21)
+#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22)
+#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23)
+#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24)
+#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25)
+#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26)
+#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27)
+#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28)
+#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29)
+#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30)
+#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31)
+#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30)
+#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31)
+#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
+#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
+#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#endif
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+
+#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h
new file mode 100644
index 00000000000..7509e7692f0
--- /dev/null
+++ b/include/asm-arm/arch-mxc/iomux-mx3.h
@@ -0,0 +1,501 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX31_IOMUX_H__
+#define __MACH_MX31_IOMUX_H__
+
+#include <linux/types.h>
+
+/*
+ * various IOMUX output functions
+ */
+
+#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
+#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
+#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
+#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
+#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
+#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
+#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
+#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
+#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
+#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
+#define IOMUX_ICONFIG_FUNC 2 /* used as function */
+#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
+#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * various IOMUX pad functions
+ */
+enum iomux_pad_config {
+ PAD_CTL_NOLOOPBACK = 0x0 << 9,
+ PAD_CTL_LOOPBACK = 0x1 << 9,
+ PAD_CTL_PKE_NONE = 0x0 << 8,
+ PAD_CTL_PKE_ENABLE = 0x1 << 8,
+ PAD_CTL_PUE_KEEPER = 0x0 << 7,
+ PAD_CTL_PUE_PUD = 0x1 << 7,
+ PAD_CTL_100K_PD = 0x0 << 5,
+ PAD_CTL_100K_PU = 0x1 << 5,
+ PAD_CTL_47K_PU = 0x2 << 5,
+ PAD_CTL_22K_PU = 0x3 << 5,
+ PAD_CTL_HYS_CMOS = 0x0 << 4,
+ PAD_CTL_HYS_SCHMITZ = 0x1 << 4,
+ PAD_CTL_ODE_CMOS = 0x0 << 3,
+ PAD_CTL_ODE_OpenDrain = 0x1 << 3,
+ PAD_CTL_DRV_NORMAL = 0x0 << 1,
+ PAD_CTL_DRV_HIGH = 0x1 << 1,
+ PAD_CTL_DRV_MAX = 0x2 << 1,
+ PAD_CTL_SRE_SLOW = 0x0 << 0,
+ PAD_CTL_SRE_FAST = 0x1 << 0
+};
+
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+ MUX_PGP_FIRI = 1 << 0,
+ MUX_DDR_MODE = 1 << 1,
+ MUX_PGP_CSPI_BB = 1 << 2,
+ MUX_PGP_ATA_1 = 1 << 3,
+ MUX_PGP_ATA_2 = 1 << 4,
+ MUX_PGP_ATA_3 = 1 << 5,
+ MUX_PGP_ATA_4 = 1 << 6,
+ MUX_PGP_ATA_5 = 1 << 7,
+ MUX_PGP_ATA_6 = 1 << 8,
+ MUX_PGP_ATA_7 = 1 << 9,
+ MUX_PGP_ATA_8 = 1 << 10,
+ MUX_PGP_UH2 = 1 << 11,
+ MUX_SDCTL_CSD0_SEL = 1 << 12,
+ MUX_SDCTL_CSD1_SEL = 1 << 13,
+ MUX_CSPI1_UART3 = 1 << 14,
+ MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
+ MUX_TAMPER_DETECT_EN = 1 << 16,
+ MUX_PGP_USB_4WIRE = 1 << 17,
+ MUX_PGB_USB_COMMON = 1 << 18,
+ MUX_SDHC_MEMSTICK1 = 1 << 19,
+ MUX_SDHC_MEMSTICK2 = 1 << 20,
+ MUX_PGP_SPLL_BYP = 1 << 21,
+ MUX_PGP_UPLL_BYP = 1 << 22,
+ MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
+ MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
+ MUX_CSPI3_UART5_SEL = 1 << 25,
+ MUX_PGP_ATA_9 = 1 << 26,
+ MUX_PGP_USB_SUSPEND = 1 << 27,
+ MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
+ MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
+ MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
+ MUX_CLKO_DDR_MODE = 1 << 31,
+};
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void iomux_config_gpr(enum iomux_gp_func , bool);
+
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+
+#define IOMUX_PADNUM_MASK 0x1ff
+#define IOMUX_GPIONUM_SHIFT 9
+#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
+#define IOMUX_MODE_SHIFT 17
+#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT)
+
+#define IOMUX_PIN(gpionum, padnum) \
+ (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
+ (padnum & IOMUX_PADNUM_MASK))
+
+#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
+
+#define IOMUX_TO_GPIO(iomux_pin) \
+ ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
+#define IOMUX_TO_IRQ(iomux_pin) \
+ (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
+ MXC_GPIO_INT_BASE)
+
+/*
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+
+enum iomux_pins {
+ MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0),
+ MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1),
+ MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2),
+ MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3),
+ MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4),
+ MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5),
+ MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6),
+ MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7),
+ MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8),
+ MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9),
+ MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10),
+ MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11),
+ MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12),
+ MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13),
+ MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14),
+ MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15),
+ MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16),
+ MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17),
+ MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18),
+ MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
+ MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
+ MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
+ MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
+ MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
+ MX31_PIN_READ = IOMUX_PIN(0xff, 24),
+ MX31_PIN_WRITE = IOMUX_PIN(0xff, 25),
+ MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26),
+ MX31_PIN_SER_RS = IOMUX_PIN(89, 27),
+ MX31_PIN_LCS1 = IOMUX_PIN(88, 28),
+ MX31_PIN_LCS0 = IOMUX_PIN(87, 29),
+ MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30),
+ MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31),
+ MX31_PIN_SD_D_I = IOMUX_PIN(84, 32),
+ MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
+ MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
+ MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
+ MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36),
+ MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
+ MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
+ MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
+ MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
+ MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
+ MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
+ MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
+ MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
+ MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
+ MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
+ MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
+ MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
+ MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
+ MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
+ MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
+ MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
+ MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
+ MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
+ MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55),
+ MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56),
+ MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57),
+ MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58),
+ MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59),
+ MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60),
+ MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61),
+ MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62),
+ MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63),
+ MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64),
+ MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65),
+ MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66),
+ MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67),
+ MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68),
+ MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69),
+ MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70),
+ MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71),
+ MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72),
+ MX31_PIN_USB_BYP = IOMUX_PIN(31, 73),
+ MX31_PIN_USB_OC = IOMUX_PIN(30, 74),
+ MX31_PIN_USB_PWR = IOMUX_PIN(29, 75),
+ MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76),
+ MX31_PIN_DE_B = IOMUX_PIN(0xff, 77),
+ MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78),
+ MX31_PIN_TDO = IOMUX_PIN(0xff, 79),
+ MX31_PIN_TDI = IOMUX_PIN(0xff, 80),
+ MX31_PIN_TMS = IOMUX_PIN(0xff, 81),
+ MX31_PIN_TCK = IOMUX_PIN(0xff, 82),
+ MX31_PIN_RTCK = IOMUX_PIN(0xff, 83),
+ MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84),
+ MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85),
+ MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86),
+ MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87),
+ MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88),
+ MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89),
+ MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90),
+ MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91),
+ MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92),
+ MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93),
+ MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94),
+ MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95),
+ MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96),
+ MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97),
+ MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98),
+ MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99),
+ MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100),
+ MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101),
+ MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102),
+ MX31_PIN_TXD2 = IOMUX_PIN(28, 103),
+ MX31_PIN_RXD2 = IOMUX_PIN(27, 104),
+ MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105),
+ MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106),
+ MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107),
+ MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108),
+ MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109),
+ MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110),
+ MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111),
+ MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112),
+ MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113),
+ MX31_PIN_CTS1 = IOMUX_PIN(39, 114),
+ MX31_PIN_RTS1 = IOMUX_PIN(38, 115),
+ MX31_PIN_TXD1 = IOMUX_PIN(37, 116),
+ MX31_PIN_RXD1 = IOMUX_PIN(36, 117),
+ MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118),
+ MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119),
+ MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120),
+ MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121),
+ MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122),
+ MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123),
+ MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124),
+ MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125),
+ MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126),
+ MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127),
+ MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128),
+ MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129),
+ MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130),
+ MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131),
+ MX31_PIN_SFS6 = IOMUX_PIN(26, 132),
+ MX31_PIN_SCK6 = IOMUX_PIN(25, 133),
+ MX31_PIN_SRXD6 = IOMUX_PIN(24, 134),
+ MX31_PIN_STXD6 = IOMUX_PIN(23, 135),
+ MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136),
+ MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137),
+ MX31_PIN_SRXD5 = IOMUX_PIN(22, 138),
+ MX31_PIN_STXD5 = IOMUX_PIN(21, 139),
+ MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140),
+ MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141),
+ MX31_PIN_SRXD4 = IOMUX_PIN(20, 142),
+ MX31_PIN_STXD4 = IOMUX_PIN(19, 143),
+ MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144),
+ MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145),
+ MX31_PIN_SRXD3 = IOMUX_PIN(18, 146),
+ MX31_PIN_STXD3 = IOMUX_PIN(17, 147),
+ MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148),
+ MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149),
+ MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150),
+ MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151),
+ MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152),
+ MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153),
+ MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154),
+ MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155),
+ MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156),
+ MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157),
+ MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158),
+ MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159),
+ MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160),
+ MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161),
+ MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162),
+ MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163),
+ MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164),
+ MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165),
+ MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166),
+ MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167),
+ MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168),
+ MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169),
+ MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170),
+ MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171),
+ MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172),
+ MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173),
+ MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174),
+ MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175),
+ MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176),
+ MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177),
+ MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178),
+ MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179),
+ MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180),
+ MX31_PIN_D0 = IOMUX_PIN(0xff, 181),
+ MX31_PIN_D1 = IOMUX_PIN(0xff, 182),
+ MX31_PIN_D2 = IOMUX_PIN(0xff, 183),
+ MX31_PIN_D3 = IOMUX_PIN(0xff, 184),
+ MX31_PIN_D4 = IOMUX_PIN(0xff, 185),
+ MX31_PIN_D5 = IOMUX_PIN(0xff, 186),
+ MX31_PIN_D6 = IOMUX_PIN(0xff, 187),
+ MX31_PIN_D7 = IOMUX_PIN(0xff, 188),
+ MX31_PIN_D8 = IOMUX_PIN(0xff, 189),
+ MX31_PIN_D9 = IOMUX_PIN(0xff, 190),
+ MX31_PIN_D10 = IOMUX_PIN(0xff, 191),
+ MX31_PIN_D11 = IOMUX_PIN(0xff, 192),
+ MX31_PIN_D12 = IOMUX_PIN(0xff, 193),
+ MX31_PIN_D13 = IOMUX_PIN(0xff, 194),
+ MX31_PIN_D14 = IOMUX_PIN(0xff, 195),
+ MX31_PIN_D15 = IOMUX_PIN(0xff, 196),
+ MX31_PIN_NFRB = IOMUX_PIN(16, 197),
+ MX31_PIN_NFCE_B = IOMUX_PIN(15, 198),
+ MX31_PIN_NFWP_B = IOMUX_PIN(14, 199),
+ MX31_PIN_NFCLE = IOMUX_PIN(13, 200),
+ MX31_PIN_NFALE = IOMUX_PIN(12, 201),
+ MX31_PIN_NFRE_B = IOMUX_PIN(11, 202),
+ MX31_PIN_NFWE_B = IOMUX_PIN(10, 203),
+ MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204),
+ MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205),
+ MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206),
+ MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207),
+ MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208),
+ MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209),
+ MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210),
+ MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211),
+ MX31_PIN_SDWE = IOMUX_PIN(0xff, 212),
+ MX31_PIN_CAS = IOMUX_PIN(0xff, 213),
+ MX31_PIN_RAS = IOMUX_PIN(0xff, 214),
+ MX31_PIN_RW = IOMUX_PIN(0xff, 215),
+ MX31_PIN_BCLK = IOMUX_PIN(0xff, 216),
+ MX31_PIN_LBA = IOMUX_PIN(0xff, 217),
+ MX31_PIN_ECB = IOMUX_PIN(0xff, 218),
+ MX31_PIN_CS5 = IOMUX_PIN(0xff, 219),
+ MX31_PIN_CS4 = IOMUX_PIN(0xff, 220),
+ MX31_PIN_CS3 = IOMUX_PIN(0xff, 221),
+ MX31_PIN_CS2 = IOMUX_PIN(0xff, 222),
+ MX31_PIN_CS1 = IOMUX_PIN(0xff, 223),
+ MX31_PIN_CS0 = IOMUX_PIN(0xff, 224),
+ MX31_PIN_OE = IOMUX_PIN(0xff, 225),
+ MX31_PIN_EB1 = IOMUX_PIN(0xff, 226),
+ MX31_PIN_EB0 = IOMUX_PIN(0xff, 227),
+ MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228),
+ MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229),
+ MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230),
+ MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231),
+ MX31_PIN_SD31 = IOMUX_PIN(0xff, 232),
+ MX31_PIN_SD30 = IOMUX_PIN(0xff, 233),
+ MX31_PIN_SD29 = IOMUX_PIN(0xff, 234),
+ MX31_PIN_SD28 = IOMUX_PIN(0xff, 235),
+ MX31_PIN_SD27 = IOMUX_PIN(0xff, 236),
+ MX31_PIN_SD26 = IOMUX_PIN(0xff, 237),
+ MX31_PIN_SD25 = IOMUX_PIN(0xff, 238),
+ MX31_PIN_SD24 = IOMUX_PIN(0xff, 239),
+ MX31_PIN_SD23 = IOMUX_PIN(0xff, 240),
+ MX31_PIN_SD22 = IOMUX_PIN(0xff, 241),
+ MX31_PIN_SD21 = IOMUX_PIN(0xff, 242),
+ MX31_PIN_SD20 = IOMUX_PIN(0xff, 243),
+ MX31_PIN_SD19 = IOMUX_PIN(0xff, 244),
+ MX31_PIN_SD18 = IOMUX_PIN(0xff, 245),
+ MX31_PIN_SD17 = IOMUX_PIN(0xff, 246),
+ MX31_PIN_SD16 = IOMUX_PIN(0xff, 247),
+ MX31_PIN_SD15 = IOMUX_PIN(0xff, 248),
+ MX31_PIN_SD14 = IOMUX_PIN(0xff, 249),
+ MX31_PIN_SD13 = IOMUX_PIN(0xff, 250),
+ MX31_PIN_SD12 = IOMUX_PIN(0xff, 251),
+ MX31_PIN_SD11 = IOMUX_PIN(0xff, 252),
+ MX31_PIN_SD10 = IOMUX_PIN(0xff, 253),
+ MX31_PIN_SD9 = IOMUX_PIN(0xff, 254),
+ MX31_PIN_SD8 = IOMUX_PIN(0xff, 255),
+ MX31_PIN_SD7 = IOMUX_PIN(0xff, 256),
+ MX31_PIN_SD6 = IOMUX_PIN(0xff, 257),
+ MX31_PIN_SD5 = IOMUX_PIN(0xff, 258),
+ MX31_PIN_SD4 = IOMUX_PIN(0xff, 259),
+ MX31_PIN_SD3 = IOMUX_PIN(0xff, 260),
+ MX31_PIN_SD2 = IOMUX_PIN(0xff, 261),
+ MX31_PIN_SD1 = IOMUX_PIN(0xff, 262),
+ MX31_PIN_SD0 = IOMUX_PIN(0xff, 263),
+ MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264),
+ MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265),
+ MX31_PIN_A25 = IOMUX_PIN(0xff, 266),
+ MX31_PIN_A24 = IOMUX_PIN(0xff, 267),
+ MX31_PIN_A23 = IOMUX_PIN(0xff, 268),
+ MX31_PIN_A22 = IOMUX_PIN(0xff, 269),
+ MX31_PIN_A21 = IOMUX_PIN(0xff, 270),
+ MX31_PIN_A20 = IOMUX_PIN(0xff, 271),
+ MX31_PIN_A19 = IOMUX_PIN(0xff, 272),
+ MX31_PIN_A18 = IOMUX_PIN(0xff, 273),
+ MX31_PIN_A17 = IOMUX_PIN(0xff, 274),
+ MX31_PIN_A16 = IOMUX_PIN(0xff, 275),
+ MX31_PIN_A14 = IOMUX_PIN(0xff, 276),
+ MX31_PIN_A15 = IOMUX_PIN(0xff, 277),
+ MX31_PIN_A13 = IOMUX_PIN(0xff, 278),
+ MX31_PIN_A12 = IOMUX_PIN(0xff, 279),
+ MX31_PIN_A11 = IOMUX_PIN(0xff, 280),
+ MX31_PIN_MA10 = IOMUX_PIN(0xff, 281),
+ MX31_PIN_A10 = IOMUX_PIN(0xff, 282),
+ MX31_PIN_A9 = IOMUX_PIN(0xff, 283),
+ MX31_PIN_A8 = IOMUX_PIN(0xff, 284),
+ MX31_PIN_A7 = IOMUX_PIN(0xff, 285),
+ MX31_PIN_A6 = IOMUX_PIN(0xff, 286),
+ MX31_PIN_A5 = IOMUX_PIN(0xff, 287),
+ MX31_PIN_A4 = IOMUX_PIN(0xff, 288),
+ MX31_PIN_A3 = IOMUX_PIN(0xff, 289),
+ MX31_PIN_A2 = IOMUX_PIN(0xff, 290),
+ MX31_PIN_A1 = IOMUX_PIN(0xff, 291),
+ MX31_PIN_A0 = IOMUX_PIN(0xff, 292),
+ MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293),
+ MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294),
+ MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295),
+ MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296),
+ MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297),
+ MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298),
+ MX31_PIN_CKIL = IOMUX_PIN(0xff, 299),
+ MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300),
+ MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301),
+ MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302),
+ MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303),
+ MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304),
+ MX31_PIN_CLKO = IOMUX_PIN(0xff, 305),
+ MX31_PIN_POR_B = IOMUX_PIN(0xff, 306),
+ MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307),
+ MX31_PIN_CKIH = IOMUX_PIN(0xff, 308),
+ MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309),
+ MX31_PIN_SRX0 = IOMUX_PIN(34, 310),
+ MX31_PIN_STX0 = IOMUX_PIN(33, 311),
+ MX31_PIN_SVEN0 = IOMUX_PIN(32, 312),
+ MX31_PIN_SRST0 = IOMUX_PIN(67, 313),
+ MX31_PIN_SCLK0 = IOMUX_PIN(66, 314),
+ MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315),
+ MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316),
+ MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317),
+ MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318),
+ MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319),
+ MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320),
+ MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321),
+ MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322),
+ MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323),
+ MX31_PIN_PWMO = IOMUX_PIN( 9, 324),
+ MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325),
+ MX31_PIN_COMPARE = IOMUX_PIN( 8, 326),
+ MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
+};
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MX31_PIN_(pin name)__(function)
+ */
+#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins, u32);
+
+#endif
+
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
index b2c5205e196..f416130718c 100644
--- a/include/asm-arm/arch-mxc/irqs.h
+++ b/include/asm-arm/arch-mxc/irqs.h
@@ -13,17 +13,4 @@
#include <asm/hardware.h>
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE)
-#define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x)
-
-/* Number of normal interrupts */
-#define NR_IRQS (MXC_MAX_INT_LINES + \
- MXC_MAX_GPIO_LINES + \
- MXC_MAX_VIRTUAL_INTS)
-
-/* Number of fast interrupts */
-#define NR_FIQS MXC_MAX_INTS
-
#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h
new file mode 100644
index 00000000000..212ecc24662
--- /dev/null
+++ b/include/asm-arm/arch-mxc/mx27.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX27_H__
+#define __ASM_ARCH_MXC_MX27_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* IRAM */
+#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
+
+/* Register offests */
+#define AIPI_BASE_ADDR 0x10000000
+#define AIPI_BASE_ADDR_VIRT 0xF4000000
+#define AIPI_SIZE SZ_1M
+
+#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
+
+#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
+#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000)
+#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000)
+#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000)
+#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000)
+#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000)
+#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000)
+#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000)
+#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000)
+
+#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
+#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000)
+#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
+/* for mx27*/
+#define OTG_BASE_ADDR USBOTG_BASE_ADDR
+#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
+#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
+#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
+
+#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000)
+#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000)
+#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000)
+#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000)
+#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000)
+
+#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
+
+/* ROMP and AVIC */
+#define ROMP_BASE_ADDR 0x10041000
+
+#define AVIC_BASE_ADDR 0x10040000
+
+#define SAHB1_BASE_ADDR 0x80000000
+#define SAHB1_BASE_ADDR_VIRT 0xF4100000
+#define SAHB1_SIZE SZ_1M
+
+#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
+#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000)
+
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR 0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
+#define X_MEMC_SIZE SZ_1M
+
+#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR 0xA0000000
+#define CSD1_BASE_ADDR 0xB0000000
+
+#define CS0_BASE_ADDR 0xC0000000
+#define CS1_BASE_ADDR 0xC8000000
+#define CS2_BASE_ADDR 0xD0000000
+#define CS3_BASE_ADDR 0xD2000000
+#define CS4_BASE_ADDR 0xD4000000
+#define CS5_BASE_ADDR 0xD6000000
+#define PCMCIA_MEM_BASE_ADDR 0xDC000000
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+ AIPI_IO_ADDRESS(x) : \
+ ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+ SAHB1_IO_ADDRESS(x) : \
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+ X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x) \
+ (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x) \
+ (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrput numbers */
+#define MXC_INT_CCM 63
+#define MXC_INT_IIM 62
+#define MXC_INT_LCDC 61
+#define MXC_INT_SLCDC 60
+#define MXC_INT_SAHARA 59
+#define MXC_INT_SCC_SCM 58
+#define MXC_INT_SCC_SMN 57
+#define MXC_INT_USB3 56
+#define MXC_INT_USB2 55
+#define MXC_INT_USB1 54
+#define MXC_INT_VPU 53
+#define MXC_INT_EMMAPP 52
+#define MXC_INT_EMMAPRP 51
+#define MXC_INT_FEC 50
+#define MXC_INT_UART5 49
+#define MXC_INT_UART6 48
+#define MXC_INT_DMACH15 47
+#define MXC_INT_DMACH14 46
+#define MXC_INT_DMACH13 45
+#define MXC_INT_DMACH12 44
+#define MXC_INT_DMACH11 43
+#define MXC_INT_DMACH10 42
+#define MXC_INT_DMACH9 41
+#define MXC_INT_DMACH8 40
+#define MXC_INT_DMACH7 39
+#define MXC_INT_DMACH6 38
+#define MXC_INT_DMACH5 37
+#define MXC_INT_DMACH4 36
+#define MXC_INT_DMACH3 35
+#define MXC_INT_DMACH2 34
+#define MXC_INT_DMACH1 33
+#define MXC_INT_DMACH0 32
+#define MXC_INT_CSI 31
+#define MXC_INT_ATA 30
+#define MXC_INT_NANDFC 29
+#define MXC_INT_PCMCIA 28
+#define MXC_INT_WDOG 27
+#define MXC_INT_GPT1 26
+#define MXC_INT_GPT2 25
+#define MXC_INT_GPT3 24
+#define MXC_INT_GPT INT_GPT1
+#define MXC_INT_PWM 23
+#define MXC_INT_RTC 22
+#define MXC_INT_KPP 21
+#define MXC_INT_UART1 20
+#define MXC_INT_UART2 19
+#define MXC_INT_UART3 18
+#define MXC_INT_UART4 17
+#define MXC_INT_CSPI1 16
+#define MXC_INT_CSPI2 15
+#define MXC_INT_SSI1 14
+#define MXC_INT_SSI2 13
+#define MXC_INT_I2C 12
+#define MXC_INT_SDHC1 11
+#define MXC_INT_SDHC2 10
+#define MXC_INT_SDHC3 9
+#define MXC_INT_GPIO 8
+#define MXC_INT_SDHC 7
+#define MXC_INT_CSPI3 6
+#define MXC_INT_RTIC 5
+#define MXC_INT_GPT4 4
+#define MXC_INT_GPT5 3
+#define MXC_INT_GPT6 2
+#define MXC_INT_I2C2 1
+
+/* fixed DMA request numbers */
+#define DMA_REQ_NFC 37
+#define DMA_REQ_SDHC3 36
+#define DMA_REQ_UART6_RX 35
+#define DMA_REQ_UART6_TX 34
+#define DMA_REQ_UART5_RX 33
+#define DMA_REQ_UART5_TX 32
+#define DMA_REQ_CSI_RX 31
+#define DMA_REQ_CSI_STAT 30
+#define DMA_REQ_ATA_RCV 29
+#define DMA_REQ_ATA_TX 28
+#define DMA_REQ_UART1_TX 27
+#define DMA_REQ_UART1_RX 26
+#define DMA_REQ_UART2_TX 25
+#define DMA_REQ_UART2_RX 24
+#define DMA_REQ_UART3_TX 23
+#define DMA_REQ_UART3_RX 22
+#define DMA_REQ_UART4_TX 21
+#define DMA_REQ_UART4_RX 20
+#define DMA_REQ_CSPI1_TX 19
+#define DMA_REQ_CSPI1_RX 18
+#define DMA_REQ_CSPI2_TX 17
+#define DMA_REQ_CSPI2_RX 16
+#define DMA_REQ_SSI1_TX1 15
+#define DMA_REQ_SSI1_RX1 14
+#define DMA_REQ_SSI1_TX0 13
+#define DMA_REQ_SSI1_RX0 12
+#define DMA_REQ_SSI2_TX1 11
+#define DMA_REQ_SSI2_RX1 10
+#define DMA_REQ_SSI2_TX0 9
+#define DMA_REQ_SSI2_RX0 8
+#define DMA_REQ_SDHC1 7
+#define DMA_REQ_SDHC2 6
+#define DMA_REQ_MSHC 4
+#define DMA_REQ_EXT 3
+#define DMA_REQ_CSPI3_TX 2
+#define DMA_REQ_CSPI3_RX 1
+
+/* silicon revisions specific to i.MX27 */
+#define CHIP_REV_1_0 0x00
+#define CHIP_REV_2_0 0x01
+
+#ifndef __ASSEMBLY__
+extern int mx27_revision(void);
+#endif
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this is an i.MX27 CPU */
+#define cpu_is_mx27() (1)
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS (192 + 16)
+
+/* OS clock tick rate */
+#define CLOCK_TICK_RATE 13300000
+
+/* Start of RAM */
+#define PHYS_OFFSET SDRAM_BASE_ADDR
+
+/* max interrupt lines count */
+#define NR_IRQS 256
+
+/* count of internal interrupt sources */
+#define MXC_MAX_INT_LINES 64
+
+#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h
index 36a1af495bb..a7373e4a56c 100644
--- a/include/asm-arm/arch-mxc/mx31.h
+++ b/include/asm-arm/arch-mxc/mx31.h
@@ -320,6 +320,8 @@
#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM)
#define MXC_MAX_VIRTUAL_INTS 16
+#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
+
/*!
* Number of GPIO port as defined in the IC Spec
*/
@@ -347,6 +349,25 @@
#define SYSTEM_REV_MIN CHIP_REV_1_0
#define SYSTEM_REV_NUM 3
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x00
+#define GPIO_GDIR 0x04
+#define GPIO_PSR 0x08
+#define GPIO_ICR1 0x0C
+#define GPIO_ICR2 0x10
+#define GPIO_IMR 0x14
+#define GPIO_ISR 0x18
+#define GPIO_INT_LOW_LEV 0x0
+#define GPIO_INT_HIGH_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_FALL_EDGE 0x3
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS 96
+
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
/* this is a i.MX31 CPU */
diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h
index 146d3f60951..332eda4dbd3 100644
--- a/include/asm-arm/arch-mxc/mxc.h
+++ b/include/asm-arm/arch-mxc/mxc.h
@@ -1,11 +1,20 @@
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_H__
@@ -20,133 +29,8 @@
# define cpu_is_mx31() (0)
#endif
-/*
- *****************************************
- * GPT Register definitions *
- *****************************************
- */
-#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00)
-#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04)
-#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08)
-#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C)
-#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10)
-#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14)
-#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18)
-#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C)
-#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20)
-#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24)
-
-/* GPT Control register bit definitions */
-#define GPTCR_FO3 (1 << 31)
-#define GPTCR_FO2 (1 << 30)
-#define GPTCR_FO1 (1 << 29)
-
-#define GPTCR_OM3_SHIFT 26
-#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT)
-#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT)
-
-#define GPTCR_OM2_SHIFT 23
-#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT)
-#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT)
-
-#define GPTCR_OM1_SHIFT 20
-#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT)
-#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT)
-
-#define GPTCR_IM2_SHIFT 18
-#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT)
-#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT)
-
-#define GPTCR_IM1_SHIFT 16
-#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT)
-#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT)
-
-#define GPTCR_SWR (1 << 15)
-#define GPTCR_FRR (1 << 9)
-
-#define GPTCR_CLKSRC_SHIFT 6
-#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT)
-#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT)
-
-#define GPTCR_STOPEN (1 << 5)
-#define GPTCR_DOZEN (1 << 4)
-#define GPTCR_WAITEN (1 << 3)
-#define GPTCR_DBGEN (1 << 2)
-
-#define GPTCR_ENMOD (1 << 1)
-#define GPTCR_ENABLE (1 << 0)
-
-#define GPTSR_OF1 (1 << 0)
-#define GPTSR_OF2 (1 << 1)
-#define GPTSR_OF3 (1 << 2)
-#define GPTSR_IF1 (1 << 3)
-#define GPTSR_IF2 (1 << 4)
-#define GPTSR_ROV (1 << 5)
-
-#define GPTIR_OF1IE GPTSR_OF1
-#define GPTIR_OF2IE GPTSR_OF2
-#define GPTIR_OF3IE GPTSR_OF3
-#define GPTIR_IF1IE GPTSR_IF1
-#define GPTIR_IF2IE GPTSR_IF2
-#define GPTIR_ROVIE GPTSR_ROV
-
-/*
- *****************************************
- * AVIC Registers *
- *****************************************
- */
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
-#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
-#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
-#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
-#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
-#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
-#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
-#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
-
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+#ifndef CONFIG_MACH_MX27
+# define cpu_is_mx27() (0)
+#endif
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h
new file mode 100644
index 00000000000..6cb11f4f1a0
--- /dev/null
+++ b/include/asm-arm/arch-mxc/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT TIM1_INT
+
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_CLK_TIN (3<<1)
+#define TCTL_CLK_32 (4<<1)
+
+#define MXC_TCTL 0x00
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT1
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG (1<<6)
+#define TCTL_FRR (1<<9)
+#define TCTL_WAITEN (1<<3)
+
+#define MXC_TPRER 0x04
+#define MXC_TSTAT 0x08
+#define TSTAT_OF1 (1<<0)
+#define TSTAT_OF2 (1<<1)
+#define TSTAT_OF3 (1<<2)
+#define TSTAT_IF1 (1<<3)
+#define TSTAT_IF2 (1<<4)
+#define TSTAT_ROV (1<<5)
+#define MXC_IR 0x0c
+#define MXC_TCMP 0x10
+#define MXC_TCMP2 0x14
+#define MXC_TCMP3 0x18
+#define MXC_TCR 0x1c
+#define MXC_TCN 0x24
+
+static inline void gpt_irq_disable(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR (1<<15)
+#define TCTL_CC (1<<10)
+#define TCTL_OM (1<<9)
+#define TCTL_CAP_RIS (1<<6)
+#define TCTL_CAP_FAL (2<<6)
+#define TCTL_CAP_RIS_FAL (3<<6)
+#define TCTL_CAP_ENA (1<<5)
+#define TCTL_TEN (1<<0)
+
+#endif
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
index 0b7b34603f1..0dca11ce21f 100644
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ b/include/asm-arm/arch-ns9xxx/hardware.h
@@ -66,13 +66,13 @@
__REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
# define REGGETIM_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx))) / \
+ __REGGET(var, reg ## _ ## field((idx))) / \
__REGSHIFT(reg ## _ ## field((idx)))
#else
# define __REG(x) io_p2v(x)
-# define __REG2(x, y) io_p2v((x) + (y))
+# define __REG2(x, y) io_p2v((x) + 4 * (y))
#endif
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
index e9c65ce3cb1..c7db9004ec3 100644
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ b/include/asm-arm/arch-omap/board-2430sdp.h
@@ -36,9 +36,4 @@
#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
-/* TWL4030 Primary Interrupt Handler (PIH) interrupts */
-#define IH_TWL4030_BASE IH_BOARD_BASE
-#define IH_TWL4030_END (IH_TWL4030_BASE+8)
-#define NR_IRQS (IH_TWL4030_END)
-
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
index 0f6404435ea..c5d0f32a40a 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -30,12 +30,6 @@
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300
-#define MAXIRQNUM (IH_BOARD_BASE)
-#define MAXFIQNUM MAXIRQNUM
-#define MAXSWINUM MAXIRQNUM
-
-#define NR_IRQS (MAXIRQNUM + 1)
-
extern void h3_mmc_init(void);
extern void h3_mmc_slot_cover_handler(void *arg, int state);
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
index 56d2c98e143..9ca03dec9d3 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -36,9 +36,6 @@
#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
-#define NR_FPGA_IRQS 24
-#define NR_IRQS (IH_BOARD_BASE + NR_FPGA_IRQS)
-
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
index eb74420cb43..d7429cb0f72 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -36,10 +36,4 @@
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
-#define MAXIRQNUM IH_BOARD_BASE
-#define MAXFIQNUM MAXIRQNUM
-#define MAXSWINUM MAXIRQNUM
-
-#define NR_IRQS (MAXIRQNUM + 1)
-
#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 12a5e4de951..4c7b3514f71 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -33,12 +33,24 @@ struct dpll_data {
void __iomem *mult_div1_reg;
u32 mult_mask;
u32 div1_mask;
+ u16 last_rounded_m;
+ u8 last_rounded_n;
+ unsigned long last_rounded_rate;
+ unsigned int rate_tolerance;
+ u16 max_multiplier;
+ u8 max_divider;
+ u32 max_tolerance;
# if defined(CONFIG_ARCH_OMAP3)
+ u8 modes;
void __iomem *control_reg;
u32 enable_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
+ void __iomem *autoidle_reg;
+ u32 autoidle_mask;
+ void __iomem *idlest_reg;
+ u8 idlest_bit;
# endif
};
@@ -66,11 +78,14 @@ struct clk {
void __iomem *clksel_reg;
u32 clksel_mask;
const struct clksel *clksel;
- const struct dpll_data *dpll_data;
+ struct dpll_data *dpll_data;
#else
__u8 rate_offset;
__u8 src_offset;
#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
};
struct cpufreq_frequency_table;
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 36a3b62d4d8..8ac03071f60 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,8 +47,23 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+/* IO bases for various OMAP processors */
+struct omap_globals {
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+};
+
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 59c0686f8be..987553e3eeb 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -167,8 +167,7 @@
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-extern void omap_ctrl_base_set(u32 base);
-extern u32 omap_ctrl_base_get(void);
+extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
extern u32 omap_ctrl_readl(u16 offset);
@@ -176,7 +175,6 @@ extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
#else
-#define omap_ctrl_base_set(x) WARN_ON(1)
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#define omap_ctrl_readw(x) 0
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
index e8a4cf52778..52db09f8328 100644
--- a/include/asm-arm/arch-omap/cpu.h
+++ b/include/asm-arm/arch-omap/cpu.h
@@ -3,7 +3,7 @@
*
* OMAP cpu type detection
*
- * Copyright (C) 2004 Nokia Corporation
+ * Copyright (C) 2004, 2008 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
@@ -26,6 +26,12 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+struct omap_chip_id {
+ u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x) { .oc = x }
+
extern unsigned int system_rev;
#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
@@ -345,6 +351,33 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP2430_REV_ES1_0 0x24300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
+#define OMAP3430_REV_ES2_1 0x34302000
+#define OMAP3430_REV_ES2_2 0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
/*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD
@@ -362,6 +395,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
-#endif
+void omap2_check_revision(void);
+
+#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
#endif
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index 24acf090030..f4dcb958786 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -22,108 +22,128 @@
#define __ASM_ARCH_DMA_H
/* Hardware registers for omap1 */
-#define OMAP_DMA_BASE (0xfffed800)
-#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400)
-#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404)
-#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408)
-#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442)
-#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444)
-#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446)
-#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448)
-#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a)
-#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c)
-#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e)
-#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450)
-#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452)
-#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454)
-#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456)
-#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458)
-#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a)
-#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460)
-#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480)
-#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482)
-#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0)
-
-/* Hardware registers for omap2 */
-#if defined(CONFIG_ARCH_OMAP3)
-#define OMAP_DMA4_BASE (L4_34XX_BASE + 0x56000)
-#else /* CONFIG_ARCH_OMAP2 */
-#define OMAP_DMA4_BASE (L4_24XX_BASE + 0x56000)
-#endif
-
-#define OMAP_DMA4_REVISION (OMAP_DMA4_BASE + 0x00)
-#define OMAP_DMA4_GCR_REG (OMAP_DMA4_BASE + 0x78)
-#define OMAP_DMA4_IRQSTATUS_L0 (OMAP_DMA4_BASE + 0x08)
-#define OMAP_DMA4_IRQSTATUS_L1 (OMAP_DMA4_BASE + 0x0c)
-#define OMAP_DMA4_IRQSTATUS_L2 (OMAP_DMA4_BASE + 0x10)
-#define OMAP_DMA4_IRQSTATUS_L3 (OMAP_DMA4_BASE + 0x14)
-#define OMAP_DMA4_IRQENABLE_L0 (OMAP_DMA4_BASE + 0x18)
-#define OMAP_DMA4_IRQENABLE_L1 (OMAP_DMA4_BASE + 0x1c)
-#define OMAP_DMA4_IRQENABLE_L2 (OMAP_DMA4_BASE + 0x20)
-#define OMAP_DMA4_IRQENABLE_L3 (OMAP_DMA4_BASE + 0x24)
-#define OMAP_DMA4_SYSSTATUS (OMAP_DMA4_BASE + 0x28)
-#define OMAP_DMA4_OCP_SYSCONFIG (OMAP_DMA4_BASE + 0x2c)
-#define OMAP_DMA4_CAPS_0 (OMAP_DMA4_BASE + 0x64)
-#define OMAP_DMA4_CAPS_2 (OMAP_DMA4_BASE + 0x6c)
-#define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70)
-#define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74)
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_LOGICAL_DMA_CH_COUNT 17
+#define OMAP1_DMA_BASE (0xfffed800)
+
+#define OMAP1_DMA_GCR 0x400
+#define OMAP1_DMA_GSCR 0x404
+#define OMAP1_DMA_GRST 0x408
+#define OMAP1_DMA_HW_ID 0x442
+#define OMAP1_DMA_PCH2_ID 0x444
+#define OMAP1_DMA_PCH0_ID 0x446
+#define OMAP1_DMA_PCH1_ID 0x448
+#define OMAP1_DMA_PCHG_ID 0x44a
+#define OMAP1_DMA_PCHD_ID 0x44c
+#define OMAP1_DMA_CAPS_0_U 0x44e
+#define OMAP1_DMA_CAPS_0_L 0x450
+#define OMAP1_DMA_CAPS_1_U 0x452
+#define OMAP1_DMA_CAPS_1_L 0x454
+#define OMAP1_DMA_CAPS_2 0x456
+#define OMAP1_DMA_CAPS_3 0x458
+#define OMAP1_DMA_CAPS_4 0x45a
+#define OMAP1_DMA_PCH2_SR 0x460
+#define OMAP1_DMA_PCH0_SR 0x480
+#define OMAP1_DMA_PCH1_SR 0x482
+#define OMAP1_DMA_PCHD_SR 0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION 0x00
+#define OMAP_DMA4_GCR 0x78
+#define OMAP_DMA4_IRQSTATUS_L0 0x08
+#define OMAP_DMA4_IRQSTATUS_L1 0x0c
+#define OMAP_DMA4_IRQSTATUS_L2 0x10
+#define OMAP_DMA4_IRQSTATUS_L3 0x14
+#define OMAP_DMA4_IRQENABLE_L0 0x18
+#define OMAP_DMA4_IRQENABLE_L1 0x1c
+#define OMAP_DMA4_IRQENABLE_L2 0x20
+#define OMAP_DMA4_IRQENABLE_L3 0x24
+#define OMAP_DMA4_SYSSTATUS 0x28
+#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
+#define OMAP_DMA4_CAPS_0 0x64
+#define OMAP_DMA4_CAPS_2 0x6c
+#define OMAP_DMA4_CAPS_3 0x70
+#define OMAP_DMA4_CAPS_4 0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT 17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
/* Common channel specific registers for omap1 */
-#define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
-#define OMAP_DMA_CCR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
-#define OMAP_DMA_CICR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
-#define OMAP_DMA_CSR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
-#define OMAP_DMA_CEN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
-#define OMAP_DMA_CFN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
-#define OMAP_DMA_CSFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
-#define OMAP_DMA_CSEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
-#define OMAP_DMA_CSAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
-#define OMAP_DMA_CDAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
-#define OMAP_DMA_CDEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
-#define OMAP_DMA_CDFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
-#define OMAP_DMA_CLNK_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
-
-#else
-
-#define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
+#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
+#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
/* Common channel specific registers for omap2 */
-#define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80)
-#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84)
-#define OMAP_DMA_CICR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x88)
-#define OMAP_DMA_CSR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x8c)
-#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x90)
-#define OMAP_DMA_CEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x94)
-#define OMAP_DMA_CFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x98)
-#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa4)
-#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa8)
-#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xac)
-#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb0)
-#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb4)
-#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb8)
-
-#endif
+#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
-#define OMAP1_DMA_CCR2_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
-#define OMAP1_DMA_COLOR_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
-#define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
+#define OMAP1_DMA_CCEN(n) 0
+#define OMAP1_DMA_CCFN(n) 0
/* Channel specific registers only on omap2 */
-#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x9c)
-#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa0)
-#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xbc)
-#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc0)
-#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc4)
+#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION 0
+#define OMAP1_DMA_IRQSTATUS_L0 0
+#define OMAP1_DMA_IRQENABLE_L0 0
+#define OMAP1_DMA_OCP_SYSCONFIG 0
+#define OMAP_DMA4_HW_ID 0
+#define OMAP_DMA4_CAPS_0_L 0
+#define OMAP_DMA4_CAPS_0_U 0
+#define OMAP_DMA4_CAPS_1_L 0
+#define OMAP_DMA4_CAPS_1_U 0
+#define OMAP_DMA4_GSCR 0
+#define OMAP_DMA4_CPC(n) 0
+
+#define OMAP_DMA4_LCH_CTRL(n) 0
+#define OMAP_DMA4_COLOR_L(n) 0
+#define OMAP_DMA4_COLOR_U(n) 0
+#define OMAP_DMA4_CCR2(n) 0
+#define OMAP1_DMA_CSSA(n) 0
+#define OMAP1_DMA_CDSA(n) 0
+#define OMAP_DMA4_CSSA_L(n) 0
+#define OMAP_DMA4_CSSA_U(n) 0
+#define OMAP_DMA4_CDSA_L(n) 0
+#define OMAP_DMA4_CDSA_U(n) 0
/*----------------------------------------------------------------------------*/
@@ -196,63 +216,98 @@
#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP24XX_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP24XX_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP24XX_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* SDMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* SDMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* SDMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* SDMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* SDMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* SDMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* SDMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* SDMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* SDMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* SDMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* SDMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* SDMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* SDMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* SDMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* SDMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* SDMA_45 */
-
-#define OMAP24XX_DMA_UART1_TX 49 /* SDMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* SDMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* SDMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* SDMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* SDMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* SDMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* SDMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* SDMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* SDMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* SDMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* SDMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* SDMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */
-#define OMAP24XX_DMA_MS 63 /* SDMA_62 */
-#define OMAP24XX_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
/*----------------------------------------------------------------------------*/
@@ -358,6 +413,11 @@ enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_16,
};
+enum end_type {
+ OMAP_DMA_LITTLE_ENDIAN = 0,
+ OMAP_DMA_BIG_ENDIAN
+};
+
enum omap_dma_color_mode {
OMAP_DMA_COLOR_DIS = 0,
OMAP_DMA_CONSTANT_FILL,
@@ -370,24 +430,34 @@ enum omap_dma_write_mode {
OMAP_DMA_WRITE_LAST_NON_POSTED
};
+enum omap_dma_channel_mode {
+ OMAP_DMA_LCH_2D = 0,
+ OMAP_DMA_LCH_G,
+ OMAP_DMA_LCH_P,
+ OMAP_DMA_LCH_PD
+};
+
struct omap_dma_channel_params {
int data_type; /* data type 8,16,32 */
int elem_count; /* number of elements in a frame */
int frame_count; /* number of frames in a element */
int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int src_amode; /* constant , post increment, indexed , double indexed */
+ int src_amode; /* constant, post increment, indexed,
+ double indexed */
unsigned long src_start; /* source address : physical */
int src_ei; /* source element index */
int src_fi; /* source frame index */
int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int dst_amode; /* constant , post increment, indexed , double indexed */
+ int dst_amode; /* constant, post increment, indexed,
+ double indexed */
unsigned long dst_start; /* source address : physical */
int dst_ei; /* source element index */
int dst_fi; /* source frame index */
- int trigger; /* trigger attached if the channel is synchronized */
+ int trigger; /* trigger attached if the channel is
+ synchronized */
int sync_mode; /* sycn on element, frame , block or packet */
int src_or_dst_synch; /* source synch(1) or destination synch(0) */
@@ -404,8 +474,8 @@ struct omap_dma_channel_params {
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
- void (* callback)(int lch, u16 ch_status, void *data),
- void *data, int *dma_ch);
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch);
extern void omap_enable_dma_irq(int ch, u16 irq_bits);
extern void omap_disable_dma_irq(int ch, u16 irq_bits);
extern void omap_free_dma(int ch);
@@ -418,6 +488,7 @@ extern void omap_set_dma_transfer_params(int lch, int data_type,
extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
u32 color);
extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
@@ -436,23 +507,26 @@ extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_params(int lch,
- struct omap_dma_channel_params * params);
+ struct omap_dma_channel_params *params);
-extern void omap_dma_link_lch (int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
extern int omap_set_dma_callback(int lch,
- void (* callback)(int lch, u16 ch_status, void *data),
+ void (*callback)(int lch, u16 ch_status, void *data),
void *data);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern int omap_get_dma_src_addr_counter(int lch);
extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
extern int omap_dma_running(void);
extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
int tparams);
extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
@@ -478,7 +552,7 @@ extern int omap_dma_chain_status(int chain_id);
#endif
/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
void *data);
extern void omap_free_lcd_dma(void);
extern void omap_setup_lcd_dma(void);
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index fefb276ed40..02b29e8437a 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -66,6 +66,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer);
void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
index 6a883e0bdbb..f420881d2a3 100644
--- a/include/asm-arm/arch-omap/fpga.h
+++ b/include/asm-arm/arch-omap/fpga.h
@@ -169,30 +169,29 @@ struct h2p2_dbg_fpga {
#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_IH_FPGA_BASE IH_BOARD_BASE
-#define OMAP1510_INT_FPGA_ATN (OMAP1510_IH_FPGA_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP1510_IH_FPGA_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP1510_IH_FPGA_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP1510_IH_FPGA_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP1510_IH_FPGA_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP1510_IH_FPGA_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP1510_IH_FPGA_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP1510_IH_FPGA_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP1510_IH_FPGA_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP1510_IH_FPGA_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP1510_IH_FPGA_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP1510_IH_FPGA_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP1510_IH_FPGA_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP1510_IH_FPGA_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP1510_IH_FPGA_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP1510_IH_FPGA_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP1510_IH_FPGA_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP1510_IH_FPGA_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP1510_IH_FPGA_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP1510_IH_FPGA_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP1510_IH_FPGA_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP1510_IH_FPGA_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP1510_IH_FPGA_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP1510_IH_FPGA_BASE + 23)
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 91d85b3417b..45fdfccbd5d 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -284,6 +284,7 @@
#include "omap1510.h"
#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 160578e1f55..0b13557fd30 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -60,6 +60,7 @@
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_p2v(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
@@ -91,6 +92,7 @@
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
@@ -148,6 +150,7 @@
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
@@ -183,35 +186,12 @@
#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
-/* 16 bit uses LDRH/STRH, base +/- offset_8 */
-typedef struct { volatile u16 offset[256]; } __regbase16;
-#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
- ->offset[((vaddr)&0xff)>>1]
-#define __REG16(paddr) __REGV16(io_p2v(paddr))
-
-/* 8/32 bit uses LDR/STR, base +/- offset_12 */
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>0]
-#define __REG8(paddr) __REGV8(io_p2v(paddr))
-
-typedef struct { volatile u32 offset[4096]; } __regbase32;
-#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>2]
-#define __REG32(paddr) __REGV32(io_p2v(paddr))
-
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
extern void omap2_init_common_hw(void);
-#else
-
-#define __REG8(paddr) io_p2v(paddr)
-#define __REG16(paddr) io_p2v(paddr)
-#define __REG32(paddr) io_p2v(paddr)
-
#endif
#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 87973654e62..7464c694859 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -285,7 +285,41 @@
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define IH_BOARD_BASE (16 + IH_MPUIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
+#else
+#define TWL4030_BASE_NR_IRQS 0
+#define TWL4030_PWR_NR_IRQS 0
+#endif
+#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
+#ifdef CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS 18
+#else
+#define TWL4030_GPIO_NR_IRQS 0
+#endif
+#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS TWL4030_GPIO_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
@@ -293,14 +327,6 @@
extern void omap_init_irq(void);
#endif
-/*
- * The definition of NR_IRQS is in board-specific header file, which is
- * included via hardware.h
- */
#include <asm/hardware.h>
-#ifndef NR_IRQS
-#define NR_IRQS IH_BOARD_BASE
-#endif
-
#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
index c7a0cc1c4e9..26c78f67dc8 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -24,7 +24,11 @@
#ifndef __ASM_ARCH_OMAP_MCBSP_H
#define __ASM_ARCH_OMAP_MCBSP_H
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
#include <asm/hardware.h>
+#include <asm/arch/clock.h>
#define OMAP730_MCBSP1_BASE 0xfffb1000
#define OMAP730_MCBSP2_BASE 0xfffb1800
@@ -40,6 +44,9 @@
#define OMAP24XX_MCBSP1_BASE 0x48074000
#define OMAP24XX_MCBSP2_BASE 0x48076000
+#define OMAP34XX_MCBSP1_BASE 0x48074000
+#define OMAP34XX_MCBSP2_BASE 0x49022000
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
#define OMAP_MCBSP_REG_DRR2 0x00
@@ -74,7 +81,8 @@
#define OMAP_MCBSP_REG_XCERG 0x3A
#define OMAP_MCBSP_REG_XCERH 0x3C
-#define OMAP_MAX_MCBSP_COUNT 3
+#define OMAP_MAX_MCBSP_COUNT 3
+#define MAX_MCBSP_CLOCKS 3
#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
@@ -117,7 +125,8 @@
#define OMAP_MCBSP_REG_XCERG 0x74
#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MAX_MCBSP_COUNT 2
+#define OMAP_MAX_MCBSP_COUNT 2
+#define MAX_MCBSP_CLOCKS 2
#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -298,6 +307,55 @@ struct omap_mcbsp_spi_cfg {
omap_mcbsp_word_length word_length;
};
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+ int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ u32 virt_base;
+ u8 dma_rx_sync, dma_tx_sync;
+ u16 rx_irq, tx_irq;
+ struct omap_mcbsp_ops *ops;
+ char const *clk_name;
+};
+
+struct omap_mcbsp {
+ struct device *dev;
+ u32 io_base;
+ u8 id;
+ u8 free;
+ omap_mcbsp_word_length rx_word_length;
+ omap_mcbsp_word_length tx_word_length;
+
+ omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+ /* IRQ based TX/RX */
+ int rx_irq;
+ int tx_irq;
+
+ /* DMA stuff */
+ u8 dma_rx_sync;
+ short dma_rx_lch;
+ u8 dma_tx_sync;
+ short dma_tx_lch;
+
+ /* Completion queues */
+ struct completion tx_irq_completion;
+ struct completion rx_irq_completion;
+ struct completion tx_dma_completion;
+ struct completion rx_dma_completion;
+
+ /* Protect the field .free, while checking if the mcbsp is in use */
+ spinlock_t lock;
+ struct omap_mcbsp_platform_data *pdata;
+ struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+ int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
new file mode 100644
index 00000000000..aa30c6d10ab
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * include/asm-arm/arch-omap/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE 0x48000000
+#define L4_WK_34XX_BASE 0x48300000
+#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE 0x49000000
+#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE 0x54000000
+#define L4_EMU_BASE L4_EMU_34XX_BASE
+#define L3_34XX_BASE 0x68000000
+#define L3_OMAP_BASE L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE 0x48320000
+#define OMAP3430_CM_BASE 0x48004800
+#define OMAP3430_PRM_BASE 0x48306800
+#define OMAP343X_SMS_BASE 0x6C000000
+#define OMAP343X_SDRC_BASE 0x6D000000
+#define OMAP34XX_GPMC_BASE 0x6E000000
+#define OMAP343X_SCM_BASE 0x48002000
+#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE 0x48200000
+#define OMAP34XX_IVA_INTC_BASE 0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE 0x58000000
+#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index bb9bb3fd532..be59f4a9828 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+extern int __init omap_sram_init(void);
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -21,17 +22,35 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
-extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long sram_ddr_init_sz;
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
-extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern unsigned long sram_set_prcm_sz;
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
-extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
-extern unsigned long sram_reprogram_sdrc_sz;
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
index 8ded218cbea..65a9c82d3bf 100644
--- a/include/asm-arm/arch-omap/tc.h
+++ b/include/asm-arm/arch-omap/tc.h
@@ -75,16 +75,14 @@
#ifndef __ASSEMBLER__
/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_REG __REG32(EMIFS_CONFIG)
-
#define OMAP_EMIFS_CONFIG_FR (1 << 4)
#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
#define OMAP_EMIFS_CONFIG_BM (1 << 1)
#define OMAP_EMIFS_CONFIG_WP (1 << 0)
-#define EMIFS_CCS(n) __REG32(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n) __REG32(EMIFS_ACS0 + (4 * (n)))
+#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
@@ -93,13 +91,13 @@
*/
static inline u32 omap_cs0_phys(void)
{
- return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
}
static inline u32 omap_cs3_phys(void)
{
- return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 2147d18aaea..ddf1861e6df 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -34,11 +34,8 @@
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
*/
-#define OTG_REG32(offset) __REG32(OTG_BASE + (offset))
-#define OTG_REG16(offset) __REG16(OTG_BASE + (offset))
-
-#define OTG_REV_REG OTG_REG32(0x00)
-#define OTG_SYSCON_1_REG OTG_REG32(0x04)
+#define OTG_REV (OTG_BASE + 0x00)
+#define OTG_SYSCON_1 (OTG_BASE + 0x04)
# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
@@ -47,7 +44,7 @@
# define DEV_IDLE_EN (1 << 13)
# define OTG_RESET_DONE (1 << 2)
# define OTG_SOFT_RESET (1 << 1)
-#define OTG_SYSCON_2_REG OTG_REG32(0x08)
+#define OTG_SYSCON_2 (OTG_BASE + 0x08)
# define OTG_EN (1 << 31)
# define USBX_SYNCHRO (1 << 30)
# define OTG_MST16 (1 << 29)
@@ -65,7 +62,7 @@
# define HMC_TLLSPEED (1 << 7)
# define HMC_TLLATTACH (1 << 6)
# define OTG_HMC(w) (((w)>>0)&0x3f)
-#define OTG_CTRL_REG OTG_REG32(0x0c)
+#define OTG_CTRL (OTG_BASE + 0x0c)
# define OTG_USB2_EN (1 << 29)
# define OTG_USB2_DP (1 << 28)
# define OTG_USB2_DM (1 << 27)
@@ -92,7 +89,7 @@
# define OTG_PD_VBUS (1 << 2)
# define OTG_PU_VBUS (1 << 1)
# define OTG_PU_ID (1 << 0)
-#define OTG_IRQ_EN_REG OTG_REG16(0x10)
+#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
# define DRIVER_SWITCH (1 << 15)
# define A_VBUS_ERR (1 << 13)
# define A_REQ_TMROUT (1 << 12)
@@ -102,9 +99,9 @@
# define B_SRP_DONE (1 << 8)
# define B_SRP_STARTED (1 << 7)
# define OPRT_CHG (1 << 0)
-#define OTG_IRQ_SRC_REG OTG_REG16(0x14)
+#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
// same bits as in IRQ_EN
-#define OTG_OUTCTRL_REG OTG_REG16(0x18)
+#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
# define OTGVPD (1 << 14)
# define OTGVPU (1 << 13)
# define OTGPUID (1 << 12)
@@ -117,13 +114,13 @@
# define USB0VDR (1 << 2)
# define USB0PDEN (1 << 1)
# define USB0PUEN (1 << 0)
-#define OTG_TEST_REG OTG_REG16(0x20)
-#define OTG_VENDOR_CODE_REG OTG_REG32(0xfc)
+#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
+#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
/*-------------------------------------------------------------------------*/
/* OMAP1 */
-#define USB_TRANSCEIVER_CTRL_REG __REG32(0xfffe1000 + 0x0064)
+#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
# define CONF_USB2_UNI_R (1 << 8)
# define CONF_USB1_UNI_R (1 << 7)
# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
index 50f8c880220..59f1bc96a23 100644
--- a/include/asm-arm/arch-orion5x/io.h
+++ b/include/asm-arm/arch-orion5x/io.h
@@ -14,7 +14,6 @@
#include "orion5x.h"
#define IO_SPACE_LIMIT 0xffffffff
-#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE
static inline void __iomem *
__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
@@ -53,15 +52,12 @@ static inline void __iomem *__io(unsigned long addr)
/*****************************************************************************
* Helpers to access Orion registers
****************************************************************************/
-#define orion5x_read(r) __raw_readl(r)
-#define orion5x_write(r, val) __raw_writel(val, r)
-
/*
* These are not preempt-safe. Locks, if needed, must be taken
* care of by the caller.
*/
-#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask))
-#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask))
+#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r))
#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
index 206ddd71e19..10257f5c5e9 100644
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ b/include/asm-arm/arch-orion5x/orion5x.h
@@ -2,7 +2,7 @@
* include/asm-arm/arch-orion5x/orion5x.h
*
* Generic definitions of Orion SoC flavors:
- * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
+ * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
@@ -63,9 +63,11 @@
/*******************************************************************************
* Supported Devices & Revisions
******************************************************************************/
-/* Orion-1 (88F5181) */
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
#define MV88F5181_DEV_ID 0x5181
#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
/* Orion-NAS (88F5182) */
#define MV88F5182_DEV_ID 0x5182
#define MV88F5182_REV_A2 2
@@ -152,6 +154,7 @@
#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
index 5c13d4fafb4..7548cedf2d7 100644
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ b/include/asm-arm/arch-orion5x/uncompress.h
@@ -8,23 +8,38 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/serial_reg.h>
#include <asm/arch/orion5x.h>
-#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE 0x20
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
- int j = 0x1000;
- while (--j && !(*MV_UART_LSR & LSR_THRE))
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
barrier();
- *MV_UART_THR = c;
+ }
+
+ base[UART_TX << 2] = c;
}
static void flush(void)
{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
}
/*
diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h
index 52bbe3bc25e..f82f96dd105 100644
--- a/include/asm-arm/arch-pxa/audio.h
+++ b/include/asm-arm/arch-pxa/audio.h
@@ -12,4 +12,6 @@ typedef struct {
void *priv;
} pxa2xx_audio_ops_t;
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
#endif
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index e25558faa5a..d9af6dabc89 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -192,15 +192,6 @@ extern int pxa_gpio_get_value(unsigned gpio);
extern void pxa_gpio_set_value(unsigned gpio, int value);
/*
- * Routine to enable or disable CKEN
- */
-static inline void __deprecated pxa_set_cken(int clock, int enable)
-{
- extern void __pxa_set_cken(int clock, int enable);
- __pxa_set_cken(clock, enable);
-}
-
-/*
* return current memory and LCD clock frequency in units of 10kHz
*/
extern unsigned int get_memclk_frequency_10khz(void);
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
index 99f4f423a8e..0a50c3c763d 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -16,4 +16,8 @@ struct pxaficp_platform_data {
extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 4b2ea1e95c5..dce9308626b 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -600,418 +600,6 @@
/*
- * USB Device Controller
- * PXA25x and PXA27x USB device controller registers are different.
- */
-#if defined(CONFIG_PXA25x)
-
-#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
-#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
-#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_UDE (1 << 0) /* UDC enable */
-#define UDCCR_UDA (1 << 1) /* UDC active */
-#define UDCCR_RSM (1 << 2) /* Device resume */
-#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
-#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
-#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
-#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
-
-#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
-#define UDCCS0_IPR (1 << 1) /* IN packet ready */
-#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
-#define UDCCS0_SST (1 << 4) /* Sent stall */
-#define UDCCS0_FST (1 << 5) /* Force stall */
-#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
-#define UDCCS0_SA (1 << 7) /* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_BI_SST (1 << 4) /* Sent stall */
-#define UDCCS_BI_FST (1 << 5) /* Force stall */
-#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_BO_DME (1 << 3) /* DMA enable */
-#define UDCCS_BO_SST (1 << 4) /* Sent stall */
-#define UDCCS_BO_FST (1 << 5) /* Force stall */
-#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
-#define UDCCS_IO_DME (1 << 3) /* DMA enable */
-#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_INT_SST (1 << 4) /* Sent stall */
-#define UDCCS_INT_FST (1 << 5) /* Force stall */
-#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
-
-#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
-#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
-#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
-#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
-#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
-#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
-#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
-#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
-#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
-#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
-#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
-#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
-#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
-#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
-#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
-#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
-#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
-#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
-#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
-#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
-#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
-#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
-#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
-#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
-
-#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
-#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
-#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
-#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
-#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
-#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
-#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
-#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
-
-#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
-#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
-#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
-#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
-#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
-#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
-#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
-#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-
-#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
-
-#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
-
-#elif defined(CONFIG_PXA27x)
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
-#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
- Protocol Port Support */
-#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
- Support */
-#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
- Enable */
-#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
-#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
-#define UDCCR_ACN_S 11
-#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
-#define UDCCR_AIN_S 8
-#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
- Setting Number */
-#define UDCCR_AAISN_S 5
-#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
- Configuration */
-#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
- Error */
-#define UDCCR_UDR (1 << 2) /* UDC Resume */
-#define UDCCR_UDA (1 << 1) /* UDC Active */
-#define UDCCR_UDE (1 << 0) /* UDC Enable */
-
-#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
-
-#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
-#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
-#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
-#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
-#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
-
-#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
- Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
- Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
- Edge Interrupt Enable */
-#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
- Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
- Interrupt Enable */
-
-#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
-#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
-#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
-#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
-
-#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
-#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA (1 << 7) /* Setup Active */
-#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
-#define UDCCSR0_FST (1 << 5) /* Force Stall */
-#define UDCCSR0_SST (1 << 4) /* Sent Stall */
-#define UDCCSR0_DME (1 << 3) /* DMA Enable */
-#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
-#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
-#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
-
-#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
-#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
-#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
-#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST (1 << 5) /* Force STALL */
-#define UDCCSR_SST (1 << 4) /* Sent STALL */
-#define UDCCSR_DME (1 << 3) /* DMA Enable */
-#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
-#define UDCCSR_PC (1 << 1) /* Packet Complete */
-#define UDCCSR_FS (1 << 0) /* FIFO needs service */
-
-#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
-#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x) __REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
-#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x) __REG2(0x40600400, (x)<<2)
-#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
-#define UDCCONR_CN_S (25)
-#define UDCCONR_IN (0x07 << 22) /* Interface Number */
-#define UDCCONR_IN_S (22)
-#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
-#define UDCCONR_AISN_S (19)
-#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
-#define UDCCONR_EN_S (15)
-#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
-#define UDCCONR_ET_S (13)
-#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
-#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
-#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
-#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
-#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
-#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
-#define UDCCONR_MPS_S (2)
-#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
-#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDC_FNR_MASK (0x7ff)
-
-#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK (0x3ff)
-#endif
-
-/*
* Fast Infrared Communication Port
*/
@@ -1237,120 +825,9 @@
#endif
/*
- * Power Manager
+ * Power Manager - see pxa2xx-regs.h
*/
-#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
-#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
-#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
-#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
-#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG2(0x40F00080, (x)<<2)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC (1<<12)
-#define PCMD_DCE (1<<11)
-#define PCMD_LC (1<<10)
-/* FIXME: PCMD_SQC need be checked. */
-#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
- bit 9 should be 0 all day. */
-#define PVCR_VCSA (0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN (0x1 << 6)
-
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
-#define PSSR_RDH (1 << 5) /* Read Disable Hold */
-#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
-#define PSSR_STS (1 << 3) /* Standby Mode Status */
-#define PSSR_VFS (1 << 2) /* VDD Fault Status */
-#define PSSR_BFS (1 << 1) /* Battery Fault Status */
-#define PSSR_SSS (1 << 0) /* Software Sleep Status */
-
-#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO (1 << 15) /* RDH Override */
-#define PCFR_PO (1 << 14) /* PH Override */
-#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
-#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
-#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
-#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
-#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
-#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
-#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
-#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR (1 << 3) /* GPIO Reset */
-#define RCSR_SMR (1 << 2) /* Sleep Mode */
-#define RCSR_WDR (1 << 1) /* Watchdog Reset */
-#define RCSR_HWR (1 << 0) /* Hardware Reset */
-
-#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
/*
* SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
*/
@@ -1360,52 +837,9 @@
*/
/*
- * Core Clock
+ * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
*/
-#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
-#define CKEN __REG(0x41300004) /* Clock Enable Register */
-#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
-#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
-#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
-#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
-#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
-#define CKEN_IM (20) /* Internal Memory Clock Enable */
-#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
-#define CKEN_USIM (18) /* USIM Unit Clock Enable */
-#define CKEN_MSL (17) /* MSL Unit Clock Enable */
-#define CKEN_LCD (16) /* LCD Unit Clock Enable */
-#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
-#define CKEN_I2C (14) /* I2C Unit Clock Enable */
-#define CKEN_FICP (13) /* FICP Unit Clock Enable */
-#define CKEN_MMC (12) /* MMC Unit Clock Enable */
-#define CKEN_USB (11) /* USB Unit Clock Enable */
-#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
-#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S (8) /* I2S Unit Clock Enable */
-#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
-#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
-#define CKEN_STUART (5) /* STUART Unit Clock Enable */
-#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
-#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
-#define CKEN_SSP (3) /* SSP Unit Clock Enable */
-#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
-#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
-#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
-#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
-
-#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-
#ifdef CONFIG_PXA27x
/* Camera Interface */
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h
new file mode 100644
index 00000000000..840305916b6
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error You can't include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
+#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
+#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_UDE (1 << 0) /* UDC enable */
+#define UDCCR_UDA (1 << 1) /* UDC active */
+#define UDCCR_RSM (1 << 2) /* Device resume */
+#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
+#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
+#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
+#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
+
+#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
+#define UDCCS0_IPR (1 << 1) /* IN packet ready */
+#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
+#define UDCCS0_SST (1 << 4) /* Sent stall */
+#define UDCCS0_FST (1 << 5) /* Force stall */
+#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
+#define UDCCS0_SA (1 << 7) /* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_BI_SST (1 << 4) /* Sent stall */
+#define UDCCS_BI_FST (1 << 5) /* Force stall */
+#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_BO_DME (1 << 3) /* DMA enable */
+#define UDCCS_BO_SST (1 << 4) /* Sent stall */
+#define UDCCS_BO_FST (1 << 5) /* Force stall */
+#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
+#define UDCCS_IO_DME (1 << 3) /* DMA enable */
+#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_INT_SST (1 << 4) /* Sent stall */
+#define UDCCS_INT_FST (1 << 5) /* Force stall */
+#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
+
+#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
+#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
+#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
+#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
+#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
+#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
+#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
+#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
+#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
+#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
+#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
+#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
+#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
+#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
+#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
+#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
+#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
+#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
+#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
+#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
+#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
+#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
+#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
+#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
+
+#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
+#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
+#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
+#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
+#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
+#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
+#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
+#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
+
+#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
+#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
+#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
+#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
+#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
+#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
+#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
+#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
+
+#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
+
+#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h
new file mode 100644
index 00000000000..bc1cf7d0773
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
+
+#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+
+#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
+#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
+#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
+#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+
+#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
+#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
+#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x) __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
+#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x) __REG2(0x40600400, (x)<<2)
+#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDC_FNR_MASK (0x7ff)
+
+#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK (0x3ff)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index b81cd63cb2e..6ef1dd09970 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -1,6 +1,8 @@
#ifndef __ASM_ARCH_PXA2XX_GPIO_H
#define __ASM_ARCH_PXA2XX_GPIO_H
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
index 9553b54fa5b..73e0a329cf7 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h
@@ -81,4 +81,166 @@
#endif
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME: PCMD_SQC need be checked. */
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
+
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
+#define PSSR_RDH (1 << 5) /* Read Disable Hold */
+#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
+#define PSSR_STS (1 << 3) /* Standby Mode Status */
+#define PSSR_VFS (1 << 2) /* VDD Fault Status */
+#define PSSR_BFS (1 << 1) /* Battery Fault Status */
+#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+
+#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
+#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
+#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
+#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
+#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
+#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR (1 << 3) /* GPIO Reset */
+#define RCSR_SMR (1 << 2) /* Sleep Mode */
+#define RCSR_WDR (1 << 1) /* Watchdog Reset */
+#define RCSR_HWR (1 << 0) /* Hardware Reset */
+
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
+#define CKEN_IM (20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (12) /* MMC Unit Clock Enable */
+#define CKEN_USB (11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S (8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
#endif
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index 9aa6c2e939e..ba7e132de1b 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -12,6 +12,7 @@
#include <asm/proc-fns.h>
#include "hardware.h"
+#include "pxa2xx-regs.h"
#include "pxa-regs.h"
static inline void arch_idle(void)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index 4881b80f0f9..de577de8d18 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -15,7 +15,6 @@ struct platform_mmc_slot {
extern struct platform_mmc_slot zylonite_mmc_slot[];
-extern int gpio_backlight;
extern int gpio_eth_irq;
extern int wm9713_irq;
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
index b4da08d7a33..6bd2295c0e0 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/include/asm-arm/arch-rpc/io.h
@@ -126,7 +126,7 @@ static inline unsigned sz __in##fnsuffix (unsigned int port) \
return (unsigned sz)value; \
}
-static inline void __iomem *__ioaddr(unsigned int port)
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
{
void __iomem *ret;
if (__PORT_PCIO(port))
@@ -232,8 +232,7 @@ DECLARE_IO(int,l,"")
result; \
})
-#define __ioaddrc(port) \
- ((__PORT_PCIO(port) ? PCIO_BASE : IO_BASE) + ((port) << 2))
+#define __ioaddrc(port) __ioaddr(port)
#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
index 7583895fd33..18e10d2c35e 100644
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ b/include/asm-arm/arch-s3c2410/gpio.h
@@ -1,68 +1,18 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/gpio.h
+/* linux/include/asm-arm/arch-s3c2410/gpio.h
*
- * S3C2410 GPIO wrappers for arch-neutral GPIO calls
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
*
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ * S3C2410 - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_S3C2410_GPIO_H
-#define __ASM_ARCH_S3C2410_GPIO_H
-
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_INPUT);
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_OUTPUT);
- /* REVISIT can we write the value first, to avoid glitching? */
- s3c2410_gpio_setpin(gpio, value);
- return 0;
-}
-
-#define gpio_get_value(gpio) s3c2410_gpio_getpin(gpio)
-#define gpio_set_value(gpio,value) s3c2410_gpio_setpin(gpio, value)
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#ifdef CONFIG_CPU_S3C2400
-#define gpio_to_irq(gpio) s3c2400_gpio_getirq(gpio)
-#else
-#define gpio_to_irq(gpio) s3c2410_gpio_getirq(gpio)
-#endif
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
-/* FIXME implement irq_to_gpio() */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
-#endif
+#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index ecae9e7f5e4..37661358b42 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -189,6 +189,8 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
index bb9d30b7295..bfb222fa4ab 100644
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ b/include/asm-arm/arch-s3c2410/regs-sdi.h
@@ -28,9 +28,15 @@
#define S3C2410_SDIDCNT (0x30)
#define S3C2410_SDIDSTA (0x34)
#define S3C2410_SDIFSTA (0x38)
+
#define S3C2410_SDIDATA (0x3C)
#define S3C2410_SDIIMSK (0x40)
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1<<8)
+#define S3C2440_SDICON_MMCCLOCK (1<<5)
#define S3C2410_SDICON_BYTEORDER (1<<4)
#define S3C2410_SDICON_SDIOIRQ (1<<3)
#define S3C2410_SDICON_RWAITEN (1<<2)
@@ -42,7 +48,8 @@
#define S3C2410_SDICMDCON_LONGRSP (1<<10)
#define S3C2410_SDICMDCON_WAITRSP (1<<9)
#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_INDEX (0xff)
+#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
@@ -51,6 +58,9 @@
#define S3C2410_SDICMDSTAT_XFERING (1<<8)
#define S3C2410_SDICMDSTAT_INDEX (0xff)
+#define S3C2440_SDIDCON_DS_BYTE (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
+#define S3C2440_SDIDCON_DS_WORD (2<<22)
#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
@@ -59,6 +69,7 @@
#define S3C2410_SDIDCON_WIDEBUS (1<<16)
#define S3C2410_SDIDCON_DMAEN (1<<15)
#define S3C2410_SDIDCON_STOP (1<<14)
+#define S3C2440_SDIDCON_DATSTART (1<<14)
#define S3C2410_SDIDCON_DATMODE (3<<12)
#define S3C2410_SDIDCON_BLKNUM (0x7ff)
@@ -68,6 +79,7 @@
#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
@@ -82,10 +94,12 @@
#define S3C2410_SDIDSTA_TXDATAON (1<<1)
#define S3C2410_SDIDSTA_RXDATAON (1<<0)
+#define S3C2440_SDIFSTA_FIFORESET (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
#define S3C2410_SDIFSTA_TFDET (1<<13)
#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TXHALF (1<<11)
-#define S3C2410_SDIFSTA_TXEMPTY (1<<10)
+#define S3C2410_SDIFSTA_TFHALF (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
#define S3C2410_SDIFSTA_RFLAST (1<<9)
#define S3C2410_SDIFSTA_RFFULL (1<<8)
#define S3C2410_SDIFSTA_RFHALF (1<<7)
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
index fce83282082..911393b2c6f 100644
--- a/include/asm-arm/assembler.h
+++ b/include/asm-arm/assembler.h
@@ -56,6 +56,21 @@
#endif
/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory. Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 759a97b56ee..70b0fe724b6 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -95,11 +95,7 @@
#endif
#if defined(CONFIG_CPU_FEROCEON)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE feroceon
-# endif
+# define MULTI_CACHE 1
#endif
#if defined(CONFIG_CPU_V6)
@@ -410,6 +406,13 @@ extern void flush_dcache_page(struct page *);
extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+static inline void __flush_icache_all(void)
+{
+ asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
+ :
+ : "r" (0));
+}
+
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void flush_anon_page(struct vm_area_struct *vma,
struct page *page, unsigned long vmaddr)
diff --git a/include/asm-arm/dyntick.h b/include/asm-arm/dyntick.h
deleted file mode 100644
index 19fab2d2b76..00000000000
--- a/include/asm-arm/dyntick.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASMARM_DYNTICK_H
-#define _ASMARM_DYNTICK_H
-
-#include <asm/mach/time.h>
-
-#endif /* _ASMARM_DYNTICK_H */
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
index 684fe064523..5e22881a630 100644
--- a/include/asm-arm/ecard.h
+++ b/include/asm-arm/ecard.h
@@ -85,19 +85,6 @@
#define MAX_ECARDS 9
-typedef enum { /* Cards address space */
- ECARD_IOC,
- ECARD_MEMC,
- ECARD_EASI
-} card_type_t;
-
-typedef enum { /* Speed for ECARD_IOC space */
- ECARD_SLOW = 0,
- ECARD_MEDIUM = 1,
- ECARD_FAST = 2,
- ECARD_SYNC = 3
-} card_speed_t;
-
struct ecard_id { /* Card ID structure */
unsigned short manufacturer;
unsigned short product;
@@ -190,16 +177,6 @@ struct in_chunk_dir {
};
/*
- * ecard_claim: claim an expansion card entry
- */
-#define ecard_claim(ec) ((ec)->claimed = 1)
-
-/*
- * ecard_release: release an expansion card entry
- */
-#define ecard_release(ec) ((ec)->claimed = 0)
-
-/*
* Read a chunk from an expansion card
* cd : where to put read data
* ec : expansion card info struct
@@ -209,18 +186,6 @@ struct in_chunk_dir {
extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
/*
- * Obtain the address of a card. This returns the "old style" address
- * and should no longer be used.
- */
-static inline unsigned int __deprecated
-ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed)
-{
- extern unsigned int __ecard_address(struct expansion_card *,
- card_type_t, card_speed_t);
- return __ecard_address(ec, type, speed);
-}
-
-/*
* Request and release ecard resources
*/
extern int ecard_request_resources(struct expansion_card *ec);
diff --git a/include/asm-arm/ftrace.h b/include/asm-arm/ftrace.h
new file mode 100644
index 00000000000..584ef9a8e5a
--- /dev/null
+++ b/include/asm-arm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_ARM_FTRACE
+#define _ASM_ARM_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR ((long)(mcount))
+#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_ARM_FTRACE */
diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h
new file mode 100644
index 00000000000..0c9331f9ac2
--- /dev/null
+++ b/include/asm-arm/hardware/iop3xx-gpio.h
@@ -0,0 +1,73 @@
+/*
+ * linux/include/asm-arm/hardware/iop3xx-gpio.h
+ *
+ * IOP3xx GPIO wrappers
+ *
+ * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Based on IXP4XX gpio.h file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+
+#include <asm/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define IOP3XX_N_GPIOS 8
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (gpio > IOP3XX_N_GPIOS)
+ return __gpio_get_value(gpio);
+
+ return gpio_line_get(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio > IOP3XX_N_GPIOS) {
+ __gpio_set_value(gpio, value);
+ return;
+ }
+ gpio_line_set(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ if (gpio < IOP3XX_N_GPIOS)
+ return 0;
+ else
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * The GPIOs are not generating any interrupt
+ * Note : manuals are not clear about this
+ */
+static inline int gpio_to_irq(int gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+ return -EINVAL;
+}
+
+#endif
+
diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h
index 98d594a973d..f1a08a50060 100644
--- a/include/asm-arm/hw_irq.h
+++ b/include/asm-arm/hw_irq.h
@@ -6,15 +6,4 @@
#include <asm/mach/irq.h>
-#if defined(CONFIG_NO_IDLE_HZ)
-# include <asm/dyntick.h>
-# define handle_dynamic_tick(action) \
- if (!(action->flags & IRQF_TIMER) && system_timer->dyn_tick) { \
- write_seqlock(&xtime_lock); \
- if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \
- system_timer->dyn_tick->handler(irq, NULL); \
- write_sequnlock(&xtime_lock); \
- }
-#endif
-
#endif
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
index 47fe34d692d..c8986bb99ed 100644
--- a/include/asm-arm/kexec.h
+++ b/include/asm-arm/kexec.h
@@ -14,8 +14,6 @@
#define KEXEC_ARCH KEXEC_ARCH_ARM
-#define KEXEC_BOOT_PARAMS_SIZE 1536
-
#define KEXEC_ARM_ATAGS_OFFSET 0x1000
#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
index c042194d3ab..b1a37876942 100644
--- a/include/asm-arm/kprobes.h
+++ b/include/asm-arm/kprobes.h
@@ -59,6 +59,7 @@ struct kprobe_ctlblk {
};
void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
index 5dc357013b7..2fd36ea0130 100644
--- a/include/asm-arm/mach/time.h
+++ b/include/asm-arm/mach/time.h
@@ -41,30 +41,8 @@ struct sys_timer {
#ifndef CONFIG_GENERIC_TIME
unsigned long (*offset)(void);
#endif
-
-#ifdef CONFIG_NO_IDLE_HZ
- struct dyn_tick_timer *dyn_tick;
-#endif
-};
-
-#ifdef CONFIG_NO_IDLE_HZ
-
-#define DYN_TICK_ENABLED (1 << 1)
-
-struct dyn_tick_timer {
- spinlock_t lock;
- unsigned int state; /* Current state */
- int (*enable)(void); /* Enables dynamic tick */
- int (*disable)(void); /* Disables dynamic tick */
- void (*reprogram)(unsigned long); /* Reprograms the timer */
- int (*handler)(int, void *);
};
-void timer_dyn_reprogram(void);
-#else
-#define timer_dyn_reprogram() do { } while (0)
-#endif
-
extern struct sys_timer *system_timer;
extern void timer_tick(void);
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 6913d02ca5d..91b9dfdfed5 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -97,6 +97,11 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
+#ifdef CONFIG_SMP
+ /* check for possible thread migration */
+ if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+ __flush_icache_all();
+#endif
if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
check_context(next);
cpu_switch_mm(next->pgd, next);
diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/include/asm-arm/plat-orion/cache-feroceon-l2.h
new file mode 100644
index 00000000000..ba4e016d3ec
--- /dev/null
+++ b/include/asm-arm/plat-orion/cache-feroceon-l2.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init feroceon_l2_init(int l2_wt_override);
diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h
index ffd3852a0dd..ad4ce94c199 100644
--- a/include/asm-arm/plat-orion/orion_nand.h
+++ b/include/asm-arm/plat-orion/orion_nand.h
@@ -18,6 +18,7 @@ struct orion_nand_data {
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 width; /* buswidth */
+ u8 chip_delay;
};
diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h
index 6434ac685d2..e61b7bd97af 100644
--- a/include/asm-arm/plat-orion/pcie.h
+++ b/include/asm-arm/plat-orion/pcie.h
@@ -14,6 +14,7 @@
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
+int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
void orion_pcie_setup(void __iomem *base,
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index 8b0d594397b..b5bc692f348 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -65,6 +65,15 @@
#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0)
#define S3C2410_TCFG1_MUX0_MASK (15<<0)
+#define S3C2410_TCFG1_MUX_DIV2 (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4 (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8 (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16 (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK (4<<0)
+#define S3C2410_TCFG1_MUX_MASK (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x) ((x) * 4)
+
/* for each timer, we have an count buffer, an compare buffer and
* an observation buffer
*/
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
index f9d6f0317bc..badaac9d64a 100644
--- a/include/asm-arm/plat-s3c24xx/devs.h
+++ b/include/asm-arm/plat-s3c24xx/devs.h
@@ -21,6 +21,8 @@ extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
+extern struct platform_device s3c_device_timer[];
+
extern struct platform_device s3c_device_usb;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
@@ -36,11 +38,6 @@ extern struct platform_device s3c_device_spi1;
extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_timer0;
-extern struct platform_device s3c_device_timer1;
-extern struct platform_device s3c_device_timer2;
-extern struct platform_device s3c_device_timer3;
-
extern struct platform_device s3c_device_usbgadget;
/* s3c2440 specific devices */
diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h
new file mode 100644
index 00000000000..2d0852ac3b2
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/mci.h
@@ -0,0 +1,15 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+struct s3c24xx_mci_pdata {
+ unsigned int wprotect_invert : 1;
+ unsigned int detect_invert : 1; /* set => detect active high. */
+
+ unsigned int gpio_detect;
+ unsigned int gpio_wprotect;
+ unsigned long ocr_avail;
+ void (*set_power)(unsigned char power_mode,
+ unsigned short vdd);
+};
+
+#endif /* _ARCH_NCI_H */
diff --git a/include/asm-arm/rtc.h b/include/asm-arm/rtc.h
deleted file mode 100644
index 1a5c9232a91..00000000000
--- a/include/asm-arm/rtc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/include/asm-arm/rtc.h
- *
- * Copyright (C) 2003 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_RTC_H
-#define ASMARM_RTC_H
-
-struct module;
-
-struct rtc_ops {
- struct module *owner;
- int (*open)(void);
- void (*release)(void);
- int (*ioctl)(unsigned int, unsigned long);
-
- int (*read_time)(struct rtc_time *);
- int (*set_time)(struct rtc_time *);
- int (*read_alarm)(struct rtc_wkalrm *);
- int (*set_alarm)(struct rtc_wkalrm *);
- int (*proc)(char *buf);
-};
-
-void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
-void rtc_update(unsigned long, unsigned long);
-int register_rtc(struct rtc_ops *);
-void unregister_rtc(struct rtc_ops *);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
- return (tm->tm_year == -1) ||
- ((unsigned)tm->tm_mon >= 12) ||
- ((unsigned)(tm->tm_mday - 1) >= 31) ||
- ((unsigned)tm->tm_hour > 23) ||
- ((unsigned)tm->tm_min > 59) ||
- ((unsigned)tm->tm_sec > 59);
-}
-
-#endif
diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h
index af99636db40..7fffa2404b8 100644
--- a/include/asm-arm/smp.h
+++ b/include/asm-arm/smp.h
@@ -101,6 +101,9 @@ extern void platform_cpu_die(unsigned int cpu);
extern int platform_cpu_kill(unsigned int cpu);
extern void platform_cpu_enable(unsigned int cpu);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
/*
* Local timer interrupt handling function (can be IPI'ed).
*/
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index 8c6bc1bb9d1..909656c747e 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -39,6 +39,7 @@
#define TLB_V6_D_ASID (1 << 17)
#define TLB_V6_I_ASID (1 << 18)
+#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
@@ -51,6 +52,7 @@
* v4 - ARMv4 without write buffer
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ * fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
*/
#undef _TLB
@@ -103,6 +105,23 @@
# define v4wbi_always_flags (-1UL)
#endif
+#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags fr_tlb_flags
+# define fr_always_flags fr_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags 0
+# define fr_always_flags (-1UL)
+#endif
+
#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \
TLB_V4_I_FULL | TLB_V4_D_FULL | \
TLB_V4_D_PAGE)
@@ -245,12 +264,14 @@ extern struct cpu_tlb_fns cpu_tlb;
#define possible_tlb_flags (v3_possible_flags | \
v4_possible_flags | \
v4wbi_possible_flags | \
+ fr_possible_flags | \
v4wb_possible_flags | \
v6wbi_possible_flags)
#define always_tlb_flags (v3_always_flags & \
v4_always_flags & \
v4wbi_always_flags & \
+ fr_always_flags & \
v4wb_always_flags & \
v6wbi_always_flags)
@@ -417,6 +438,11 @@ static inline void flush_pmd_entry(pmd_t *pmd)
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
+
if (tlb_flag(TLB_WB))
dsb();
}
@@ -428,6 +454,10 @@ static inline void clean_pmd_entry(pmd_t *pmd)
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
}
#undef tlb_flag
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a4e2d28bfb5..a3783861cdd 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -8,6 +8,12 @@
#define GPIO_PIN_NONE (-1)
+/*
+ * Clock rates for various on-board oscillators. The number of entries
+ * in this array is chip-dependent.
+ */
+extern unsigned long at32_board_osc_rates[];
+
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
@@ -36,7 +42,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
struct atmel_lcdfb_info;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len);
+ unsigned long fbmem_start, unsigned long fbmem_len,
+ unsigned int pin_config);
struct usba_platform_data;
struct platform_device *
@@ -70,9 +77,14 @@ struct i2c_board_info;
struct platform_device *at32_add_device_twi(unsigned int id,
struct i2c_board_info *b,
unsigned int n);
-struct platform_device *at32_add_device_mci(unsigned int id);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
struct platform_device *at32_add_device_ac97c(unsigned int id);
struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_psif(unsigned int id);
struct cf_platform_data {
int detect_pin;
diff --git a/include/asm-avr32/arch-at32ap/init.h b/include/asm-avr32/arch-at32ap/init.h
index 5e75d850d70..bc40e3d4615 100644
--- a/include/asm-avr32/arch-at32ap/init.h
+++ b/include/asm-avr32/arch-at32ap/init.h
@@ -13,10 +13,6 @@
void setup_platform(void);
void setup_board(void);
-/* Called by setup_platform */
-void at32_clock_init(void);
-void at32_portmux_init(void);
-
void at32_setup_serial_console(unsigned int usart_id);
#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
diff --git a/include/asm-avr32/arch-at32ap/pm.h b/include/asm-avr32/arch-at32ap/pm.h
index 356e4306490..979b355b77b 100644
--- a/include/asm-avr32/arch-at32ap/pm.h
+++ b/include/asm-avr32/arch-at32ap/pm.h
@@ -19,6 +19,7 @@
#ifndef __ASSEMBLY__
extern void cpu_enter_idle(void);
+extern void cpu_enter_standby(unsigned long sdramc_base);
extern bool disable_idle_sleep;
@@ -43,6 +44,8 @@ static inline void cpu_idle_sleep(void)
else
cpu_enter_idle();
}
+
+void intc_set_suspend_handler(unsigned long offset);
#endif
#endif /* __ASM_AVR32_ARCH_PM_H */
diff --git a/include/asm-avr32/arch-at32ap/sram.h b/include/asm-avr32/arch-at32ap/sram.h
new file mode 100644
index 00000000000..4838dae7601
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/sram.h
@@ -0,0 +1,30 @@
+/*
+ * Simple SRAM allocator
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_SRAM_H
+#define __ASM_AVR32_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+ if (!sram_pool)
+ return 0UL;
+
+ return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+ return gen_pool_free(sram_pool, addr, len);
+}
+
+#endif /* __ASM_AVR32_ARCH_SRAM_H */
diff --git a/include/asm-avr32/atmel-mci.h b/include/asm-avr32/atmel-mci.h
new file mode 100644
index 00000000000..c2ea6e1c9aa
--- /dev/null
+++ b/include/asm-avr32/atmel-mci.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_ATMEL_MCI_H
+#define __ASM_AVR32_ATMEL_MCI_H
+
+struct mci_platform_data {
+ int detect_pin;
+ int wp_pin;
+};
+
+#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/include/asm-avr32/mmu_context.h b/include/asm-avr32/mmu_context.h
index c37c391faef..27ff2340710 100644
--- a/include/asm-avr32/mmu_context.h
+++ b/include/asm-avr32/mmu_context.h
@@ -13,7 +13,6 @@
#define __ASM_AVR32_MMU_CONTEXT_H
#include <asm/tlbflush.h>
-#include <asm/pgalloc.h>
#include <asm/sysreg.h>
#include <asm-generic/mm_hooks.h>
diff --git a/include/asm-avr32/pci.h b/include/asm-avr32/pci.h
index 0f5f134b896..a32a0237201 100644
--- a/include/asm-avr32/pci.h
+++ b/include/asm-avr32/pci.h
@@ -5,4 +5,6 @@
#define PCI_DMA_BUS_IS_PHYS (1)
+#include <asm-generic/pci-dma-compat.h>
+
#endif /* __ASM_AVR32_PCI_H__ */
diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h
index 51fc1f6e4b1..64082132394 100644
--- a/include/asm-avr32/pgalloc.h
+++ b/include/asm-avr32/pgalloc.h
@@ -8,65 +8,79 @@
#ifndef __ASM_AVR32_PGALLOC_H
#define __ASM_AVR32_PGALLOC_H
-#include <asm/processor.h>
-#include <linux/threads.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
+#include <linux/quicklist.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
-#define pmd_populate_kernel(mm, pmd, pte) \
- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+#define QUICK_PGD 0 /* Preserve kernel mappings over free */
+#define QUICK_PT 1 /* Zero on free */
-static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+ pmd_t *pmd, pte_t *pte)
+{
+ set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
pgtable_t pte)
{
- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
+ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
}
#define pmd_pgtable(pmd) pmd_page(pmd)
+static inline void pgd_ctor(void *x)
+{
+ pgd_t *pgd = x;
+
+ memcpy(pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
/*
* Allocate and free page tables
*/
-static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
+ return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
}
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
- kfree(pgd);
+ quicklist_free(QUICK_PGD, NULL, pgd);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- pte_t *pte;
-
- pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
-
- return pte;
+ return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
- struct page *pte;
+ struct page *page;
+ void *pg;
- pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
- if (!pte)
+ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+ if (!pg)
return NULL;
- pgtable_page_ctor(pte);
- return pte;
+
+ page = virt_to_page(pg);
+ pgtable_page_ctor(page);
+
+ return page;
}
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
- free_page((unsigned long)pte);
+ quicklist_free(QUICK_PT, NULL, pte);
}
static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
pgtable_page_dtor(pte);
- __free_page(pte);
+ quicklist_free_page(QUICK_PT, NULL, pte);
}
#define __pte_free_tlb(tlb,pte) \
@@ -75,6 +89,10 @@ do { \
tlb_remove_page((tlb), pte); \
} while (0)
-#define check_pgt_cache() do { } while(0)
+static inline void check_pgt_cache(void)
+{
+ quicklist_trim(QUICK_PGD, NULL, 25, 16);
+ quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
#endif /* __ASM_AVR32_PGALLOC_H */
diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
index c0e5e29417d..fecdda16f44 100644
--- a/include/asm-avr32/pgtable.h
+++ b/include/asm-avr32/pgtable.h
@@ -129,13 +129,6 @@ extern struct page *empty_zero_page;
#define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
-/* TODO: Check for saneness */
-/* User-mode page table flags (to be set in a pgd or pmd entry) */
-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
- | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
-/* Kernel-mode page table flags */
-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
- | _PAGE_ACCESSED | _PAGE_DIRTY)
/* Flags that may be modified by software */
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
| _PAGE_FLAGS_CACHE_MASK)
@@ -262,10 +255,14 @@ static inline pte_t pte_mkspecial(pte_t pte)
}
#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \
- != _KERNPG_TABLE)
+#define pmd_present(x) (pmd_val(x))
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ set_pmd(pmdp, __pmd(0));
+}
+
+#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
/*
* Permanent address of a page. We don't support highmem, so this is
@@ -303,19 +300,16 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
#define page_pte(page) page_pte_prot(page, __pgprot(0))
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
-#define pmd_page(pmd) (phys_to_page(pmd_val(pmd)))
+#define pmd_page_vaddr(pmd) pmd_val(pmd)
+#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
/* to find an entry in a page-table-directory. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-#define pgd_offset_current(address) \
- ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) \
+ & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* Find an entry in the third-level page table.. */
#define pte_index(address) \
diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
index ea3070ff13a..ff5b7cf6be4 100644
--- a/include/asm-avr32/setup.h
+++ b/include/asm-avr32/setup.h
@@ -2,7 +2,7 @@
* Copyright (C) 2004-2006 Atmel Corporation
*
* Based on linux/include/asm-arm/setup.h
- * Copyright (C) 1997-1999 Russel King
+ * Copyright (C) 1997-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
index 07049f6c0d4..df68631b7b2 100644
--- a/include/asm-avr32/thread_info.h
+++ b/include/asm-avr32/thread_info.h
@@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
+#define TIF_FREEZE 29
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
diff --git a/include/asm-avr32/tlbflush.h b/include/asm-avr32/tlbflush.h
index 5bc7c88a577..bf90a786f6b 100644
--- a/include/asm-avr32/tlbflush.h
+++ b/include/asm-avr32/tlbflush.h
@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-extern void __flush_tlb_page(unsigned long asid, unsigned long page);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index d3a12a9079f..7742ec000cc 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -87,7 +87,7 @@ do { \
} while(0)
#define irqs_disabled() \
- ({unsigned long flags; local_save_flags(flags); flags; })
+ ({unsigned long flags; local_save_flags(flags); !!flags; })
#define local_irq_save(flags) \
do { \
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 85fd0aa27a8..4ec0a296bde 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -2,7 +2,7 @@
#define _ASM_GENERIC_ATOMIC_H
/*
* Copyright (C) 2005 Silicon Graphics, Inc.
- * Christoph Lameter <clameter@sgi.com>
+ * Christoph Lameter
*
* Allows to provide arch independent atomic definitions without the need to
* edit all arch specific atomic.h files.
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 44ef329531c..ef87f889ef6 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -195,6 +195,63 @@ static inline int pmd_none_or_clear_bad(pmd_t *pmd)
}
return 0;
}
+
+static inline pte_t __ptep_modify_prot_start(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep)
+{
+ /*
+ * Get the current pte state, but zero it out to make it
+ * non-present, preventing the hardware from asynchronously
+ * updating it.
+ */
+ return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void __ptep_modify_prot_commit(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ /*
+ * The pte is non-present, so there's no hardware state to
+ * preserve.
+ */
+ set_pte_at(mm, addr, ptep, pte);
+}
+
+#ifndef __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+/*
+ * Start a pte protection read-modify-write transaction, which
+ * protects against asynchronous hardware modifications to the pte.
+ * The intention is not to prevent the hardware from making pte
+ * updates, but to prevent any updates it may make from being lost.
+ *
+ * This does not protect against other software modifications of the
+ * pte; the appropriate pte lock must be held over the transation.
+ *
+ * Note that this interface is intended to be batchable, meaning that
+ * ptep_modify_prot_commit may not actually update the pte, but merely
+ * queue the update to be done at some later time. The update must be
+ * actually committed before the pte lock is released, however.
+ */
+static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep)
+{
+ return __ptep_modify_prot_start(mm, addr, ptep);
+}
+
+/*
+ * Commit an update to a pte, leaving any hardware-controlled bits in
+ * the PTE unmodified.
+ */
+static inline void ptep_modify_prot_commit(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ __ptep_modify_prot_commit(mm, addr, ptep, pte);
+}
+#endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */
#endif /* CONFIG_MMU */
/*
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
index a6aea79bca4..54bbf6e04ee 100644
--- a/include/asm-generic/topology.h
+++ b/include/asm-generic/topology.h
@@ -60,7 +60,8 @@
#ifndef node_to_cpumask_ptr
#define node_to_cpumask_ptr(v, node) \
- cpumask_t _##v = node_to_cpumask(node), *v = &_##v
+ cpumask_t _##v = node_to_cpumask(node); \
+ const cpumask_t *v = &_##v
#define node_to_cpumask_ptr_next(v, node) \
_##v = node_to_cpumask(node)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index f054778e916..729f6b0a60e 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -67,6 +67,8 @@
*(.rodata1) \
} \
\
+ BUG_TABLE \
+ \
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
@@ -84,6 +86,19 @@
VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
*(.pci_fixup_resume) \
VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
+ *(.pci_fixup_resume_early) \
+ VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
+ *(.pci_fixup_suspend) \
+ VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
+ } \
+ \
+ /* Built-in firmware blobs */ \
+ .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start_builtin_fw) = .; \
+ *(.builtin_fw) \
+ VMLINUX_SYMBOL(__end_builtin_fw) = .; \
} \
\
/* RapidIO route ops */ \
@@ -93,6 +108,8 @@
VMLINUX_SYMBOL(__end_rio_route_ops) = .; \
} \
\
+ TRACEDATA \
+ \
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
@@ -310,6 +327,7 @@
.stab.indexstr 0 : { *(.stab.indexstr) } \
.comment 0 : { *(.comment) }
+#ifdef CONFIG_GENERIC_BUG
#define BUG_TABLE \
. = ALIGN(8); \
__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
@@ -317,6 +335,21 @@
*(__bug_table) \
__stop___bug_table = .; \
}
+#else
+#define BUG_TABLE
+#endif
+
+#ifdef CONFIG_PM_TRACE
+#define TRACEDATA \
+ . = ALIGN(4); \
+ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
+ __tracedata_start = .; \
+ *(.tracedata) \
+ __tracedata_end = .; \
+ }
+#else
+#define TRACEDATA
+#endif
#define NOTES \
.notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
index 6aff126fc07..f88fa054d01 100644
--- a/include/asm-ia64/processor.h
+++ b/include/asm-ia64/processor.h
@@ -763,6 +763,8 @@ prefetchw (const void *x)
#define spin_lock_prefetch(x) prefetchw(x)
extern unsigned long boot_option_idle_override;
+extern unsigned long idle_halt;
+extern unsigned long idle_nomwait;
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
index ec5f355fb7e..27731e032ee 100644
--- a/include/asm-ia64/smp.h
+++ b/include/asm-ia64/smp.h
@@ -38,9 +38,6 @@ ia64_get_lid (void)
return lid.f.id << 8 | lid.f.eid;
}
-extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
- void *info, int wait);
-
#define hard_smp_processor_id() ia64_get_lid()
#ifdef CONFIG_SMP
@@ -124,11 +121,12 @@ extern void __init init_smp_config (void);
extern void smp_do_timer (struct pt_regs *regs);
extern void smp_send_reschedule (int cpu);
-extern void lock_ipi_calllock(void);
-extern void unlock_ipi_calllock(void);
extern void identify_siblings (struct cpuinfo_ia64 *);
extern int is_multithreading_enabled(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
#else /* CONFIG_SMP */
#define cpu_logical_id(i) 0
diff --git a/include/asm-m32r/smp.h b/include/asm-m32r/smp.h
index 078e1a51a04..c5dd6691669 100644
--- a/include/asm-m32r/smp.h
+++ b/include/asm-m32r/smp.h
@@ -89,6 +89,9 @@ static __inline__ unsigned int num_booting_cpus(void)
extern void smp_send_timer(void);
extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
#endif /* not __ASSEMBLY__ */
#define NO_PROC_ID (0xff) /* No processor magic marker */
@@ -104,6 +107,7 @@ extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0)
#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0)
#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0)
+#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0)
#define IPI_SHIFT (0)
#define NR_IPIS (8)
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index a798d6299a7..1232be3885b 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -283,10 +283,10 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
" beqz %0, 2f \n"
" subu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -664,10 +664,10 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
" beqz %0, 2f \n"
" dsubu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h
index 9d8cfbb5e79..8e9ac313ca3 100644
--- a/include/asm-mips/barrier.h
+++ b/include/asm-mips/barrier.h
@@ -92,11 +92,25 @@
#define fast_wmb() __sync()
#define fast_rmb() __sync()
#define fast_mb() __sync()
+#ifdef CONFIG_SGI_IP28
+#define fast_iob() \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ "lw $0,%0\n\t" \
+ "sync\n\t" \
+ "lw $0,%0\n\t" \
+ ".set pop" \
+ : /* no output */ \
+ : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
+ : "memory")
+#else
#define fast_iob() \
do { \
__sync(); \
__fast_iob(); \
} while (0)
+#endif
#ifdef CONFIG_CPU_HAS_WB
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index 642724734eb..9a7274ba6a0 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -82,7 +82,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
"2: b 1b \n"
" .previous \n"
: "=&r" (temp), "=m" (*m)
- : "ir" (bit), "m" (*m), "r" (~0));
+ : "i" (bit), "m" (*m), "r" (~0));
#endif /* CONFIG_CPU_MIPSR2 */
} else if (cpu_has_llsc) {
__asm__ __volatile__(
@@ -147,7 +147,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
"2: b 1b \n"
" .previous \n"
: "=&r" (temp), "=m" (*m)
- : "ir" (bit), "m" (*m));
+ : "i" (bit), "m" (*m));
#endif /* CONFIG_CPU_MIPSR2 */
} else if (cpu_has_llsc) {
__asm__ __volatile__(
@@ -428,7 +428,7 @@ static inline int test_and_clear_bit(unsigned long nr,
"2: b 1b \n"
" .previous \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
- : "ri" (bit), "m" (*m)
+ : "i" (bit), "m" (*m)
: "memory");
#endif
} else if (cpu_has_llsc) {
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index e031bdff992..d39e143b4a3 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -26,13 +26,6 @@
#define MACH_UNKNOWN 0 /* whatever... */
/*
- * Valid machtype values for group JAZZ
- */
-#define MACH_ACER_PICA_61 0 /* Acer PICA-61 (PICA1) */
-#define MACH_MIPS_MAGNUM_4000 1 /* Mips Magnum 4000 "RC4030" */
-#define MACH_OLIVETTI_M700 2 /* Olivetti M700-10 (-15 ??) */
-
-/*
* Valid machtype for group DEC
*/
#define MACH_DSUNKNOWN 0
@@ -48,42 +41,6 @@
#define MACH_DS5900 10 /* DECsystem 5900 */
/*
- * Valid machtype for group SNI_RM
- */
-#define MACH_SNI_RM200_PCI 0 /* RM200/RM300/RM400 PCI series */
-
-/*
- * Valid machtype for group SGI
- */
-#define MACH_SGI_IP22 0 /* Indy, Indigo2, Challenge S */
-#define MACH_SGI_IP27 1 /* Origin 200, Origin 2000, Onyx 2 */
-#define MACH_SGI_IP28 2 /* Indigo2 Impact */
-#define MACH_SGI_IP32 3 /* O2 */
-#define MACH_SGI_IP30 4 /* Octane, Octane2 */
-
-/*
- * Valid machtypes for group Toshiba
- */
-#define MACH_PALLAS 0
-#define MACH_TOPAS 1
-#define MACH_JMR 2
-#define MACH_TOSHIBA_JMR3927 3 /* JMR-TX3927 CPU/IO board */
-#define MACH_TOSHIBA_RBTX4927 4
-#define MACH_TOSHIBA_RBTX4937 5
-#define MACH_TOSHIBA_RBTX4938 6
-
-/*
- * Valid machtype for group LASAT
- */
-#define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */
-#define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */
-
-/*
- * Valid machtype for group NEC EMMA2RH
- */
-#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
-
-/*
* Valid machtype for group PMC-MSP
*/
#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index 1c35cac6f35..229a786101d 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -66,8 +66,10 @@
#define PRID_IMP_RM7000 0x2700
#define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */
#define PRID_IMP_RM9000 0x3400
+#define PRID_IMP_LOONGSON1 0x4200
#define PRID_IMP_R5432 0x5400
#define PRID_IMP_R5500 0x5500
+#define PRID_IMP_LOONGSON2 0x6300
#define PRID_IMP_UNKNOWN 0xff00
@@ -90,8 +92,6 @@
#define PRID_IMP_24KE 0x9600
#define PRID_IMP_74K 0x9700
#define PRID_IMP_1004K 0x9900
-#define PRID_IMP_LOONGSON1 0x4200
-#define PRID_IMP_LOONGSON2 0x6300
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
index 15fe8f881e6..56d22dc8803 100644
--- a/include/asm-mips/dec/kn05.h
+++ b/include/asm-mips/dec/kn05.h
@@ -6,7 +6,7 @@
* KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
* definitions.
*
- * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -54,11 +54,11 @@
*/
#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */
#define KN4K_MB_INT_RTC (1<<1) /* RTC? */
-#define KN4K_MB_INT_MT (1<<3) /* ??? */
+#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */
/*
* Bits for the MB control & status register.
- * Set to 0x00bf8001 on my system by the ROM.
+ * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware.
*/
#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */
#define KN4K_MB_CSR_F (1<<1) /* ??? */
@@ -69,7 +69,8 @@
#define KN4K_MB_CSR_IM (1<<13) /* ??? */
#define KN4K_MB_CSR_NC (1<<14) /* ??? */
#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
-#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */
+#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */
#define KN4K_MB_CSR_FW (1<<21) /* ??? */
+#define KN4K_MB_CSR_W (1<<31) /* ??? */
#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h
deleted file mode 100644
index cc88aed23f0..00000000000
--- a/include/asm-mips/inventory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Miguel de Icaza
- */
-#ifndef __ASM_INVENTORY_H
-#define __ASM_INVENTORY_H
-
-#include <linux/compiler.h>
-
-typedef struct inventory_s {
- struct inventory_s *inv_next;
- int inv_class;
- int inv_type;
- int inv_controller;
- int inv_unit;
- int inv_state;
-} inventory_t;
-
-extern int inventory_items;
-
-extern void add_to_inventory(int class, int type, int controller, int unit, int state);
-extern int dump_inventory_to_user(void __user *userbuf, int size);
-extern int __init init_inventory(void);
-
-#endif /* __ASM_INVENTORY_H */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index f18d2816cbe..501a40b9f18 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -161,13 +161,6 @@ static inline void * isa_bus_to_virt(unsigned long address)
#define bus_to_virt phys_to_virt
/*
- * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
- * for the processor. This implies the assumption that there is only
- * one of these busses.
- */
-extern unsigned long isa_slot_offset;
-
-/*
* Change "struct page" to physical address.
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
@@ -528,16 +521,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
}
/*
- * ISA space is 'always mapped' on currently supported MIPS systems, no need
- * to explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char *)(isa_slot_offset))
-
-/*
* The caches on some architectures aren't dma-coherent and have need to
* handle this in software. There are three types of operations that
* can be applied to dma buffers.
diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h
index ea04d9262ed..caeba1e302a 100644
--- a/include/asm-mips/lasat/lasat.h
+++ b/include/asm-mips/lasat/lasat.h
@@ -240,6 +240,8 @@ static inline void lasat_ndelay(unsigned int ns)
__delay(ns / lasat_ndelay_divider);
}
+#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000)
+
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef
diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h
deleted file mode 100644
index 51d337e1bbd..00000000000
--- a/include/asm-mips/mach-atlas/mc146818rtc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2005 MIPS Technologies, Inc.
- * All rights reserved.
- * Authors: Carsten Langgaard <carstenl@mips.com>
- * Maciej W. Rozycki <macro@mips.com>
- * Copyright (C) 2003, 05 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#ifndef __ASM_MACH_ATLAS_MC146818RTC_H
-#define __ASM_MACH_ATLAS_MC146818RTC_H
-
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-
-#define ARCH_RTC_LOCATION
-
-#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8)
-#define RTC_IO_EXTENT 0x100
-#define RTC_IOMAPPED 0
-#define RTC_IRQ ATLAS_INT_RTC
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
- volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
- volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
-
- *ireg = addr;
- return *dreg;
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
- volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
- volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
-
- *ireg = addr;
- *dreg = data;
-}
-
-#define RTC_ALWAYS_BCD 0
-
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
-
-#endif /* __ASM_MACH_ATLAS_MC146818RTC_H */
diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h
index 9e0028f60a4..c35e2091849 100644
--- a/include/asm-mips/mach-au1x00/au1100_mmc.h
+++ b/include/asm-mips/mach-au1x00/au1100_mmc.h
@@ -38,15 +38,15 @@
#ifndef __ASM_AU1100_MMC_H
#define __ASM_AU1100_MMC_H
-
-#define NUM_AU1100_MMC_CONTROLLERS 2
-
-#if defined(CONFIG_SOC_AU1100)
-#define AU1100_SD_IRQ AU1100_SD_INT
-#elif defined(CONFIG_SOC_AU1200)
-#define AU1100_SD_IRQ AU1200_SD_INT
-#endif
-
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+ int(*cd_setup)(void *mmc_host, int on);
+ int(*card_inserted)(void *mmc_host);
+ int(*card_readonly)(void *mmc_host);
+ void(*set_power)(void *mmc_host, int state);
+ struct led_classdev *led;
+};
#define SD0_BASE 0xB0600000
#define SD1_BASE 0xB0680000
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index dae4eca2417..892b7f168eb 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -204,6 +204,14 @@ typedef struct psc_i2s {
u32 psc_i2sudf;
} psc_i2s_t;
+#define PSC_I2SCFG_OFFSET 0x08
+#define PSC_I2SMASK_OFFSET 0x0C
+#define PSC_I2SPCR_OFFSET 0x10
+#define PSC_I2SSTAT_OFFSET 0x14
+#define PSC_I2SEVENT_OFFSET 0x18
+#define PSC_I2SRXTX_OFFSET 0x1C
+#define PSC_I2SUDF_OFFSET 0x20
+
/* I2S Config Register. */
#define PSC_I2SCFG_RT_MASK (3 << 30)
#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index 612ae90dbcb..1a515b8c870 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -146,51 +146,6 @@ typedef volatile struct
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
/*
- * SD controller macros
- */
-
-/* Detect card. */
-#define mmc_card_inserted(_n_, _res_) \
- do { \
- BCSR * const bcsr = (BCSR *)0xAE000000; \
- unsigned long mmc_wp, board_specific; \
- if ((_n_)) { \
- mmc_wp = BCSR_BOARD_SD1_WP; \
- } else { \
- mmc_wp = BCSR_BOARD_SD0_WP; \
- } \
- board_specific = au_readl((unsigned long)(&bcsr->specific)); \
- if (!(board_specific & mmc_wp)) {/* low means card present */ \
- *(int *)(_res_) = 1; \
- } else { \
- *(int *)(_res_) = 0; \
- } \
- } while (0)
-
-/*
- * Apply power to card slot(s).
- */
-#define mmc_power_on(_n_) \
- do { \
- BCSR * const bcsr = (BCSR *)0xAE000000; \
- unsigned long mmc_pwr, mmc_wp, board_specific; \
- if ((_n_)) { \
- mmc_pwr = BCSR_BOARD_SD1_PWR; \
- mmc_wp = BCSR_BOARD_SD1_WP; \
- } else { \
- mmc_pwr = BCSR_BOARD_SD0_PWR; \
- mmc_wp = BCSR_BOARD_SD0_WP; \
- } \
- board_specific = au_readl((unsigned long)(&bcsr->specific)); \
- if (!(board_specific & mmc_wp)) {/* low means card present */ \
- board_specific |= mmc_pwr; \
- au_writel(board_specific, (int)(&bcsr->specific)); \
- au_sync(); \
- } \
- } while (0)
-
-
-/*
* NAND defines
*
* Timing values as described in databook, * ns value stripped of the
diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-malta/cpu-feature-overrides.h
index 7f3e3f9bd23..7f3e3f9bd23 100644
--- a/include/asm-mips/mach-mips/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-malta/cpu-feature-overrides.h
diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-malta/irq.h
index 9b9da26683c..9b9da26683c 100644
--- a/include/asm-mips/mach-mips/irq.h
+++ b/include/asm-mips/mach-malta/irq.h
diff --git a/include/asm-mips/mach-mips/kernel-entry-init.h b/include/asm-mips/mach-malta/kernel-entry-init.h
index 0b793e7bf67..0b793e7bf67 100644
--- a/include/asm-mips/mach-mips/kernel-entry-init.h
+++ b/include/asm-mips/mach-malta/kernel-entry-init.h
diff --git a/include/asm-mips/mach-mips/mach-gt64120.h b/include/asm-mips/mach-malta/mach-gt64120.h
index 0f863148f3b..0f863148f3b 100644
--- a/include/asm-mips/mach-mips/mach-gt64120.h
+++ b/include/asm-mips/mach-malta/mach-gt64120.h
diff --git a/include/asm-mips/mach-mips/mc146818rtc.h b/include/asm-mips/mach-malta/mc146818rtc.h
index ea612f37f61..ea612f37f61 100644
--- a/include/asm-mips/mach-mips/mc146818rtc.h
+++ b/include/asm-mips/mach-malta/mc146818rtc.h
diff --git a/include/asm-mips/mach-mips/war.h b/include/asm-mips/mach-malta/war.h
index 7c6931d5f45..7c6931d5f45 100644
--- a/include/asm-mips/mach-mips/war.h
+++ b/include/asm-mips/mach-malta/war.h
diff --git a/include/asm-mips/mach-jmr3927/ioremap.h b/include/asm-mips/mach-tx39xx/ioremap.h
index 29989ff10d6..93c6c04ffda 100644
--- a/include/asm-mips/mach-jmr3927/ioremap.h
+++ b/include/asm-mips/mach-tx39xx/ioremap.h
@@ -1,13 +1,13 @@
/*
- * include/asm-mips/mach-jmr3927/ioremap.h
+ * include/asm-mips/mach-tx39xx/ioremap.h
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#ifndef __ASM_MACH_JMR3927_IOREMAP_H
-#define __ASM_MACH_JMR3927_IOREMAP_H
+#ifndef __ASM_MACH_TX39XX_IOREMAP_H
+#define __ASM_MACH_TX39XX_IOREMAP_H
#include <linux/types.h>
@@ -35,4 +35,4 @@ static inline int plat_iounmap(const volatile void __iomem *addr)
return (unsigned long)addr >= TXX9_DIRECTMAP_BASE;
}
-#endif /* __ASM_MACH_JMR3927_IOREMAP_H */
+#endif /* __ASM_MACH_TX39XX_IOREMAP_H */
diff --git a/include/asm-mips/mach-jmr3927/mangle-port.h b/include/asm-mips/mach-tx39xx/mangle-port.h
index 11bffcd1043..ef0b502fd8b 100644
--- a/include/asm-mips/mach-jmr3927/mangle-port.h
+++ b/include/asm-mips/mach-tx39xx/mangle-port.h
@@ -1,7 +1,12 @@
-#ifndef __ASM_MACH_JMR3927_MANGLE_PORT_H
-#define __ASM_MACH_JMR3927_MANGLE_PORT_H
+#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H
+#define __ASM_MACH_TX39XX_MANGLE_PORT_H
-extern unsigned long __swizzle_addr_b(unsigned long port);
+#if defined(CONFIG_TOSHIBA_JMR3927)
+extern unsigned long (*__swizzle_addr_b)(unsigned long port);
+#define NEEDS_TXX9_SWIZZLE_ADDR_B
+#else
+#define __swizzle_addr_b(port) (port)
+#endif
#define __swizzle_addr_w(port) (port)
#define __swizzle_addr_l(port) (port)
#define __swizzle_addr_q(port) (port)
@@ -15,4 +20,4 @@ extern unsigned long __swizzle_addr_b(unsigned long port);
#define ioswabq(a, x) le64_to_cpu(x)
#define __mem_ioswabq(a, x) (x)
-#endif /* __ASM_MACH_JMR3927_MANGLE_PORT_H */
+#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */
diff --git a/include/asm-mips/mach-jmr3927/war.h b/include/asm-mips/mach-tx39xx/war.h
index 1ff55fb3fbc..43381461635 100644
--- a/include/asm-mips/mach-jmr3927/war.h
+++ b/include/asm-mips/mach-tx39xx/war.h
@@ -5,8 +5,8 @@
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
-#ifndef __ASM_MIPS_MACH_JMR3927_WAR_H
-#define __ASM_MIPS_MACH_JMR3927_WAR_H
+#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H
+#define __ASM_MIPS_MACH_TX39XX_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
@@ -22,4 +22,4 @@
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
-#endif /* __ASM_MIPS_MACH_JMR3927_WAR_H */
+#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */
diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h
index 84881229605..862058d3f81 100644
--- a/include/asm-mips/mach-vr41xx/irq.h
+++ b/include/asm-mips/mach-vr41xx/irq.h
@@ -2,9 +2,6 @@
#define __ASM_MACH_VR41XX_IRQ_H
#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
-#ifdef CONFIG_NEC_CMBVR4133
-#include <asm/vr41xx/cmbvr4133.h> /* for I8259A_IRQ_BASE */
-#endif
#include_next <irq.h>
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index 33407bee4e7..7f0b034dd9a 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -27,12 +27,8 @@
/*
* Display register base.
*/
-#ifdef CONFIG_MIPS_SEAD
-#define ASCII_DISPLAY_POS_BASE 0x1f0005c0
-#else
#define ASCII_DISPLAY_WORD_BASE 0x1f000410
#define ASCII_DISPLAY_POS_BASE 0x1f000418
-#endif
/*
@@ -44,13 +40,8 @@
/*
* Reset register.
*/
-#ifdef CONFIG_MIPS_SEAD
-#define SOFTRES_REG 0x1e800050
-#define GORESET 0x4d
-#else
#define SOFTRES_REG 0x1f000500
#define GORESET 0x42
-#endif
/*
* Revision register.
diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h
index c94d12d1f86..a6605a75246 100644
--- a/include/asm-mips/namei.h
+++ b/include/asm-mips/namei.h
@@ -1,26 +1,11 @@
#ifndef _ASM_NAMEI_H
#define _ASM_NAMEI_H
-#include <linux/personality.h>
-#include <linux/stddef.h>
+/*
+ * This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ */
-#define IRIX_EMUL "/usr/gnemul/irix/"
-#define RISCOS_EMUL "/usr/gnemul/riscos/"
-
-static inline char *__emul_prefix(void)
-{
- switch (current->personality) {
- case PER_IRIX32:
- case PER_IRIXN32:
- case PER_IRIX64:
- return IRIX_EMUL;
-
- case PER_RISCOS:
- return RISCOS_EMUL;
-
- default:
- return NULL;
- }
-}
+#define __emul_prefix() NULL
#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index 301ff2f2801..d3be8343607 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -172,4 +172,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
+extern int pci_probe_only;
+extern unsigned int pcibios_max_latency;
+
#endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/prctl.h b/include/asm-mips/prctl.h
deleted file mode 100644
index 8121a9a75bf..00000000000
--- a/include/asm-mips/prctl.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * IRIX prctl interface
- *
- * The IRIX kernel maps a page at PRDA_ADDRESS with the
- * contents of prda and fills it the bits on prda_sys.
- */
-
-#ifndef __PRCTL_H__
-#define __PRCTL_H__
-
-#define PRDA_ADDRESS 0x200000L
-#define PRDA ((struct prda *) PRDA_ADDRESS)
-
-struct prda_sys {
- pid_t t_pid;
- u32 t_hint;
- u32 t_dlactseq;
- u32 t_fpflags;
- u32 t_prid; /* processor type, $prid CP0 register */
- u32 t_dlendseq;
- u64 t_unused1[5];
- pid_t t_rpid;
- s32 t_resched;
- u32 t_unused[8];
- u32 t_cpu; /* current/last cpu */
-
- /* FIXME: The signal information, not supported by Linux now */
- u32 t_flags; /* if true, then the sigprocmask is in userspace */
- u32 t_sigprocmask [1]; /* the sigprocmask */
-};
-
-struct prda {
- char fill [0xe00];
- struct prda_sys prda_sys;
-};
-
-#define t_sys prda_sys
-
-ptrdiff_t prctl(int op, int v1, int v2);
-
-#endif
diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h
index 70009a90263..883f59bfa09 100644
--- a/include/asm-mips/setup.h
+++ b/include/asm-mips/setup.h
@@ -3,4 +3,6 @@
#define COMMAND_LINE_SIZE 256
+extern void setup_early_printk(void);
+
#endif /* __SETUP_H */
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
index 7a28989f7ee..bee5153aca4 100644
--- a/include/asm-mips/signal.h
+++ b/include/asm-mips/signal.h
@@ -119,9 +119,6 @@ struct sigaction {
struct k_sigaction {
struct sigaction sa;
-#ifdef CONFIG_BINFMT_IRIX
- void (*sa_restorer)(void);
-#endif
};
/* IRIX compatible stack_t */
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 84fef1aeec0..0ff5b523ea7 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -35,16 +35,6 @@ extern int __cpu_logical_map[NR_CPUS];
#define NO_PROC_ID (-1)
-struct call_data_struct {
- void (*func)(void *);
- void *info;
- atomic_t started;
- atomic_t finished;
- int wait;
-};
-
-extern struct call_data_struct *call_data;
-
#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */
#define SMP_CALL_FUNCTION 0x2
@@ -67,4 +57,7 @@ static inline void smp_send_reschedule(int cpu)
extern asmlinkage void smp_call_function_interrupt(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
#endif /* __ASM_SMP_H */
diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h
index e5dbde625ec..90ff2f497c5 100644
--- a/include/asm-mips/traps.h
+++ b/include/asm-mips/traps.h
@@ -24,6 +24,5 @@ extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
extern void (*board_nmi_handler_setup)(void);
extern void (*board_ejtag_handler_setup)(void);
extern void (*board_bind_eic_interrupt)(int irq, int regset);
-extern void (*board_watchpoint_handler)(struct pt_regs *regs);
#endif /* _ASM_TRAPS_H */
diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h
deleted file mode 100644
index 193e80a17c1..00000000000
--- a/include/asm-mips/tx4927/tx4927.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * Copyright 2001-2006 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_TX4927_TX4927_H
-#define __ASM_TX4927_TX4927_H
-
-#include <asm/txx9irq.h>
-
-#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE
-#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1)
-
-#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE
-#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1)
-
-
-#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0)
-#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1)
-#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2)
-#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7)
-
-#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3)
-
-#endif /* __ASM_TX4927_TX4927_H */
diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h
deleted file mode 100644
index 0be77df70f2..00000000000
--- a/include/asm-mips/tx4927/tx4927_pci.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- */
-#ifndef __ASM_TX4927_TX4927_PCI_H
-#define __ASM_TX4927_TX4927_PCI_H
-
-#define TX4927_CCFG_TOE 0x00004000
-#define TX4927_CCFG_WR 0x00008000
-#define TX4927_CCFG_TINTDIS 0x01000000
-
-#define TX4927_PCIMEM 0x08000000
-#define TX4927_PCIMEM_SIZE 0x08000000
-#define TX4927_PCIIO 0x16000000
-#define TX4927_PCIIO_SIZE 0x01000000
-
-#define TX4927_SDRAMC_REG 0xff1f8000
-#define TX4927_EBUSC_REG 0xff1f9000
-#define TX4927_PCIC_REG 0xff1fd000
-#define TX4927_CCFG_REG 0xff1fe000
-#define TX4927_IRC_REG 0xff1ff600
-#define TX4927_NR_TMR 3
-#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100)
-#define TX4927_CE3 0x17f00000 /* 1M */
-#define TX4927_PCIRESET_ADDR 0xbc00f006
-#define TX4927_PCI_CLK_ADDR (KSEG1 + TX4927_CE3 + 0x00040020)
-
-#define TX4927_IMSTAT_ADDR(n) (KSEG1 + TX4927_CE3 + 0x0004001a + (n))
-#define tx4927_imstat_ptr(n) \
- ((volatile unsigned char *)TX4927_IMSTAT_ADDR(n))
-
-/* bits for ISTAT3/IMASK3/IMSTAT3 */
-#define TX4927_INT3B_PCID 0
-#define TX4927_INT3B_PCIC 1
-#define TX4927_INT3B_PCIB 2
-#define TX4927_INT3B_PCIA 3
-#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID)
-#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC)
-#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB)
-#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA)
-
-/* bits for PCI_CLK (S6) */
-#define TX4927_PCI_CLK_HOST 0x80
-#define TX4927_PCI_CLK_MASK (0x0f << 3)
-#define TX4927_PCI_CLK_33 (0x01 << 3)
-#define TX4927_PCI_CLK_25 (0x04 << 3)
-#define TX4927_PCI_CLK_66 (0x09 << 3)
-#define TX4927_PCI_CLK_50 (0x0c << 3)
-#define TX4927_PCI_CLK_ACK 0x04
-#define TX4927_PCI_CLK_ACE 0x02
-#define TX4927_PCI_CLK_ENDIAN 0x01
-#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG
-#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */
-
-#define TX4927_IR_PCIC 16
-#define TX4927_IR_PCIERR 22
-#define TX4927_IR_PCIPMA 23
-#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC)
-#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR)
-#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC)
-#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID)
-#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC)
-#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB)
-#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA)
-
-#ifdef _LANGUAGE_ASSEMBLY
-#define _CONST64(c) c
-#else
-#define _CONST64(c) c##ull
-
-#include <asm/byteorder.h>
-
-#define tx4927_pcireset_ptr \
- ((volatile unsigned char *)TX4927_PCIRESET_ADDR)
-#define tx4927_pci_clk_ptr \
- ((volatile unsigned char *)TX4927_PCI_CLK_ADDR)
-
-struct tx4927_sdramc_reg {
- volatile unsigned long long cr[4];
- volatile unsigned long long unused0[4];
- volatile unsigned long long tr;
- volatile unsigned long long unused1[2];
- volatile unsigned long long cmd;
-};
-
-struct tx4927_ebusc_reg {
- volatile unsigned long long cr[8];
-};
-
-struct tx4927_ccfg_reg {
- volatile unsigned long long ccfg;
- volatile unsigned long long crir;
- volatile unsigned long long pcfg;
- volatile unsigned long long tear;
- volatile unsigned long long clkctr;
- volatile unsigned long long unused0;
- volatile unsigned long long garbc;
- volatile unsigned long long unused1;
- volatile unsigned long long unused2;
- volatile unsigned long long ramp;
-};
-
-struct tx4927_pcic_reg {
- volatile unsigned long pciid;
- volatile unsigned long pcistatus;
- volatile unsigned long pciccrev;
- volatile unsigned long pcicfg1;
- volatile unsigned long p2gm0plbase; /* +10 */
- volatile unsigned long p2gm0pubase;
- volatile unsigned long p2gm1plbase;
- volatile unsigned long p2gm1pubase;
- volatile unsigned long p2gm2pbase; /* +20 */
- volatile unsigned long p2giopbase;
- volatile unsigned long unused0;
- volatile unsigned long pcisid;
- volatile unsigned long unused1; /* +30 */
- volatile unsigned long pcicapptr;
- volatile unsigned long unused2;
- volatile unsigned long pcicfg2;
- volatile unsigned long g2ptocnt; /* +40 */
- volatile unsigned long unused3[15];
- volatile unsigned long g2pstatus; /* +80 */
- volatile unsigned long g2pmask;
- volatile unsigned long pcisstatus;
- volatile unsigned long pcimask;
- volatile unsigned long p2gcfg; /* +90 */
- volatile unsigned long p2gstatus;
- volatile unsigned long p2gmask;
- volatile unsigned long p2gccmd;
- volatile unsigned long unused4[24]; /* +a0 */
- volatile unsigned long pbareqport; /* +100 */
- volatile unsigned long pbacfg;
- volatile unsigned long pbastatus;
- volatile unsigned long pbamask;
- volatile unsigned long pbabm; /* +110 */
- volatile unsigned long pbacreq;
- volatile unsigned long pbacgnt;
- volatile unsigned long pbacstate;
- volatile unsigned long long g2pmgbase[3]; /* +120 */
- volatile unsigned long long g2piogbase;
- volatile unsigned long g2pmmask[3]; /* +140 */
- volatile unsigned long g2piomask;
- volatile unsigned long long g2pmpbase[3]; /* +150 */
- volatile unsigned long long g2piopbase;
- volatile unsigned long pciccfg; /* +170 */
- volatile unsigned long pcicstatus;
- volatile unsigned long pcicmask;
- volatile unsigned long unused5;
- volatile unsigned long long p2gmgbase[3]; /* +180 */
- volatile unsigned long long p2giogbase;
- volatile unsigned long g2pcfgadrs; /* +1a0 */
- volatile unsigned long g2pcfgdata;
- volatile unsigned long unused6[8];
- volatile unsigned long g2pintack;
- volatile unsigned long g2pspc;
- volatile unsigned long unused7[12]; /* +1d0 */
- volatile unsigned long long pdmca; /* +200 */
- volatile unsigned long long pdmga;
- volatile unsigned long long pdmpa;
- volatile unsigned long long pdmcut;
- volatile unsigned long long pdmcnt; /* +220 */
- volatile unsigned long long pdmsts;
- volatile unsigned long long unused8[2];
- volatile unsigned long long pdmdb[4]; /* +240 */
- volatile unsigned long long pdmtdh; /* +260 */
- volatile unsigned long long pdmdms;
-};
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/*
- * PCIC
- */
-
-/* bits for G2PSTATUS/G2PMASK */
-#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003
-#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002
-#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001
-
-/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */
-#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900
-
-/* bits for PBACFG */
-#define TX4927_PCIC_PBACFG_RPBA 0x00000004
-#define TX4927_PCIC_PBACFG_PBAEN 0x00000002
-#define TX4927_PCIC_PBACFG_BMCEN 0x00000001
-
-/* bits for G2PMnGBASE */
-#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000)
-#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000)
-
-/* bits for G2PIOGBASE */
-#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000)
-#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000)
-
-/* bits for PCICSTATUS/PCICMASK */
-#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc
-
-/* bits for PCICCFG */
-#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000
-#define TX4927_PCIC_PCICCFG_HRST 0x00000800
-#define TX4927_PCIC_PCICCFG_SRST 0x00000400
-#define TX4927_PCIC_PCICCFG_IRBER 0x00000200
-#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100
-#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080
-#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040
-#define TX4927_PCIC_PCICCFG_IISE 0x00000020
-#define TX4927_PCIC_PCICCFG_ATR 0x00000010
-#define TX4927_PCIC_PCICCFG_ICAE 0x00000008
-
-/* bits for P2GMnGBASE */
-#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000)
-#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000)
-#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000)
-
-/* bits for P2GIOGBASE */
-#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000)
-#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000)
-#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000)
-
-#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
-#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
-
-/*
- * CCFG
- */
-/* CCFG : Chip Configuration */
-#define TX4927_CCFG_PCI66 0x00800000
-#define TX4927_CCFG_PCIMIDE 0x00400000
-#define TX4927_CCFG_PCIXARB 0x00002000
-#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800
-#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000
-#define TX4927_CCFG_PCIDIVMODE_3 0x00000800
-#define TX4927_CCFG_PCIDIVMODE_5 0x00001000
-#define TX4927_CCFG_PCIDIVMODE_6 0x00001800
-
-#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00
-#define TX4937_CCFG_PCIDIVMODE_8 0x00000000
-#define TX4937_CCFG_PCIDIVMODE_4 0x00000400
-#define TX4937_CCFG_PCIDIVMODE_9 0x00000800
-#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00
-#define TX4937_CCFG_PCIDIVMODE_10 0x00001000
-#define TX4937_CCFG_PCIDIVMODE_5 0x00001400
-#define TX4937_CCFG_PCIDIVMODE_11 0x00001800
-#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00
-
-/* PCFG : Pin Configuration */
-#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000
-#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
-
-/* CLKCTR : Clock Control */
-#define TX4927_CLKCTR_PCICKD 0x00400000
-#define TX4927_CLKCTR_PCIRST 0x00000040
-
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG)
-#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG)
-#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG)
-#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG)
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-#endif /* __ASM_TX4927_TX4927_PCI_H */
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
new file mode 100644
index 00000000000..d8756660523
--- /dev/null
+++ b/include/asm-mips/txx9/generic.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-mips/txx9/generic.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_GENERIC_H
+#define __ASM_TXX9_GENERIC_H
+
+#include <linux/init.h>
+#include <linux/ioport.h> /* for struct resource */
+
+extern struct resource txx9_ce_res[];
+extern char txx9_pcode_str[8];
+void txx9_reg_res_init(unsigned int pcode, unsigned long base,
+ unsigned long size);
+
+extern unsigned int txx9_master_clock;
+extern unsigned int txx9_cpu_clock;
+extern unsigned int txx9_gbus_clock;
+
+struct pci_dev;
+struct txx9_board_vec {
+ const char *system;
+ void (*prom_init)(void);
+ void (*mem_setup)(void);
+ void (*irq_setup)(void);
+ void (*time_init)(void);
+ void (*arch_init)(void);
+ void (*device_init)(void);
+#ifdef CONFIG_PCI
+ int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif
+};
+extern struct txx9_board_vec *txx9_board_vec;
+extern int (*txx9_irq_dispatch)(int pending);
+void prom_init_cmdline(void);
+char *prom_getcmdline(void);
+
+#endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index a162268f17d..d6eb1b6a54e 100644
--- a/include/asm-mips/jmr3927/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -7,10 +7,10 @@
*
* Copyright (C) 2000-2001 Toshiba Corporation
*/
-#ifndef __ASM_TX3927_JMR3927_H
-#define __ASM_TX3927_JMR3927_H
+#ifndef __ASM_TXX9_JMR3927_H
+#define __ASM_TXX9_JMR3927_H
-#include <asm/jmr3927/tx3927.h>
+#include <asm/txx9/tx3927.h>
#include <asm/addrspace.h>
#include <asm/system.h>
#include <asm/txx9irq.h>
@@ -174,4 +174,9 @@
* INT[3:0]
*/
-#endif /* __ASM_TX3927_JMR3927_H */
+void jmr3927_prom_init(void);
+void jmr3927_irq_setup(void);
+struct pci_dev;
+int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_JMR3927_H */
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
new file mode 100644
index 00000000000..d89a45091e2
--- /dev/null
+++ b/include/asm-mips/txx9/pci.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_PCI_H
+#define __ASM_TXX9_PCI_H
+
+#include <linux/pci.h>
+
+extern struct pci_controller txx9_primary_pcic;
+struct pci_controller *
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+ unsigned long mem_base, unsigned long mem_size,
+ unsigned long io_base, unsigned long io_size);
+
+int txx9_pci66_check(struct pci_controller *hose, int top_bus,
+ int current_bus);
+extern int txx9_pci_mem_high __initdata;
+
+extern int txx9_pci_option;
+#define TXX9_PCI_OPT_PICMG 0x0002
+#define TXX9_PCI_OPT_CLK_33 0x0008
+#define TXX9_PCI_OPT_CLK_66 0x0010
+#define TXX9_PCI_OPT_CLK_MASK \
+ (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66)
+#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK
+
+enum txx9_pci_err_action {
+ TXX9_PCI_ERR_REPORT,
+ TXX9_PCI_ERR_IGNORE,
+ TXX9_PCI_ERR_PANIC,
+};
+extern enum txx9_pci_err_action txx9_pci_err_action;
+
+#endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h
index b188a659ce0..bf194589216 100644
--- a/include/asm-mips/tx4927/toshiba_rbtx4927.h
+++ b/include/asm-mips/txx9/rbtx4927.h
@@ -24,18 +24,42 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_TX4927_TOSHIBA_RBTX4927_H
-#define __ASM_TX4927_TOSHIBA_RBTX4927_H
+#ifndef __ASM_TXX9_RBTX4927_H
+#define __ASM_TXX9_RBTX4927_H
-#include <asm/tx4927/tx4927.h>
-#ifdef CONFIG_PCI
-#include <asm/tx4927/tx4927_pci.h>
-#endif
+#include <asm/txx9/tx4927.h>
+
+#define RBTX4927_PCIMEM 0x08000000
+#define RBTX4927_PCIMEM_SIZE 0x08000000
+#define RBTX4927_PCIIO 0x16000000
+#define RBTX4927_PCIIO_SIZE 0x01000000
+
+#define rbtx4927_pcireset_addr ((__u8 __iomem *)0xbc00f006UL)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4927_INTB_PCID 0
+#define RBTX4927_INTB_PCIC 1
+#define RBTX4927_INTB_PCIB 2
+#define RBTX4927_INTB_PCIA 3
+#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID)
+#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC)
+#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB)
+#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA)
+
+#define RBTX4927_NR_IRQ_IOC 8 /* IOC */
+
+#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR)
+#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID)
+#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC)
+#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB)
+#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA)
+
+#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1))
#ifdef CONFIG_PCI
-#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO
+#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO
#else
-#define TBTX4927_ISA_IO_OFFSET 0
+#define RBTX4927_ISA_IO_OFFSET 0
#endif
#define RBTX4927_SW_RESET_DO (void __iomem *)0xbc00f000UL
@@ -44,10 +68,12 @@
#define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL
#define RBTX4927_SW_RESET_ENABLE_SET 0x01
+#define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET)
+#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3))
-#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET)
-#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5)
-
-int toshiba_rbtx4927_irq_nested(int sw_irq);
+void rbtx4927_prom_init(void);
+void rbtx4927_irq_setup(void);
+struct pci_dev;
+int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-#endif /* __ASM_TX4927_TOSHIBA_RBTX4927_H */
+#endif /* __ASM_TXX9_RBTX4927_H */
diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h
index dfed7beb533..2f5d5e705a4 100644
--- a/include/asm-mips/tx4938/rbtx4938.h
+++ b/include/asm-mips/txx9/rbtx4938.h
@@ -1,5 +1,4 @@
/*
- * linux/include/asm-mips/tx4938/rbtx4938.h
* Definitions for TX4937/TX4938
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
@@ -9,12 +8,12 @@
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
-#ifndef __ASM_TX_BOARDS_RBTX4938_H
-#define __ASM_TX_BOARDS_RBTX4938_H
+#ifndef __ASM_TXX9_RBTX4938_H
+#define __ASM_TXX9_RBTX4938_H
#include <asm/addrspace.h>
-#include <asm/tx4938/tx4938.h>
#include <asm/txx9irq.h>
+#include <asm/txx9/tx4938.h>
/* CS */
#define RBTX4938_CE0 0x1c000000 /* 64M */
@@ -102,35 +101,12 @@
* that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new
* IRQ hardware is supported.
*/
-#define RBTX4938_NR_IRQ_LOCAL 8
-#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */
#define RBTX4938_NR_IRQ_IOC 8
-#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE
-#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1)
-
-#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE
-#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1)
-#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2)
-#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2)
-#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0)
-#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1)
-#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7)
-
-#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0
-#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7
-
-#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */
-#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */
-#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG
-#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL)
-#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC)
+#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE
+#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR)
#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
-#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0)
-#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1)
-#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT)
-#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT)
#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
@@ -158,11 +134,16 @@
/* IOC (PCI, etc) */
-#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC)
+#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0))
/* Onboard 10M Ether */
-#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1)
+#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1))
#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER)
-#endif /* __ASM_TX_BOARDS_RBTX4938_H */
+void rbtx4938_prom_init(void);
+void rbtx4938_irq_setup(void);
+struct pci_dev;
+int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4938_H */
diff --git a/include/asm-mips/tx4927/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 5d93bab5125..9375e4fc228 100644
--- a/include/asm-mips/tx4927/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -1,6 +1,4 @@
/*
- * linux/include/asm-mips/tx4927/smsc_fdc37m81x.h
- *
* Interface for smsc fdc48m81x Super IO chip
*
* Author: MontaVista Software, Inc. source@mvista.com
diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/txx9/spi.h
index 6a60c83e152..ddfb2a0dc43 100644
--- a/include/asm-mips/tx4938/spi.h
+++ b/include/asm-mips/txx9/spi.h
@@ -1,5 +1,4 @@
/*
- * linux/include/asm-mips/tx4938/spi.h
* Definitions for TX4937/TX4938 SPI
*
* Copyright (C) 2000-2001 Toshiba Corporation
@@ -11,10 +10,10 @@
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
-#ifndef __ASM_TX_BOARDS_TX4938_SPI_H
-#define __ASM_TX_BOARDS_TX4938_SPI_H
+#ifndef __ASM_TXX9_SPI_H
+#define __ASM_TXX9_SPI_H
extern int spi_eeprom_register(int chipid);
extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
-#endif /* __ASM_TX_BOARDS_TX4938_SPI_H */
+#endif /* __ASM_TXX9_SPI_H */
diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/txx9/tx3927.h
index fb580333c10..ca414c7624e 100644
--- a/include/asm-mips/jmr3927/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -5,10 +5,10 @@
*
* Copyright (C) 2000 Toshiba Corporation
*/
-#ifndef __ASM_TX3927_H
-#define __ASM_TX3927_H
+#ifndef __ASM_TXX9_TX3927_H
+#define __ASM_TXX9_TX3927_H
-#include <asm/jmr3927/txx927.h>
+#include <asm/txx9/txx927.h>
#define TX3927_SDRAMC_REG 0xfffe8000
#define TX3927_ROMC_REG 0xfffe9000
@@ -316,4 +316,8 @@ struct tx3927_ccfg_reg {
#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
-#endif /* __ASM_TX3927_H */
+struct pci_controller;
+void __init tx3927_pcic_setup(struct pci_controller *channel,
+ unsigned long sdram_size, int extarb);
+
+#endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
new file mode 100644
index 00000000000..46d60afc038
--- /dev/null
+++ b/include/asm-mips/txx9/tx4927.h
@@ -0,0 +1,219 @@
+/*
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2001-2006 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_TX4927_H
+#define __ASM_TXX9_TX4927_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4927pcic.h>
+
+#define TX4927_SDRAMC_REG 0xff1f8000
+#define TX4927_EBUSC_REG 0xff1f9000
+#define TX4927_PCIC_REG 0xff1fd000
+#define TX4927_CCFG_REG 0xff1fe000
+#define TX4927_IRC_REG 0xff1ff600
+#define TX4927_NR_TMR 3
+#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100)
+
+#define TX4927_IR_INT(n) (2 + (n))
+#define TX4927_IR_SIO(n) (8 + (n))
+#define TX4927_IR_PCIC 16
+#define TX4927_IR_PCIERR 22
+#define TX4927_NUM_IR 32
+
+#define TX4927_IRC_INT 2 /* IP[2] in Status register */
+
+struct tx4927_sdramc_reg {
+ volatile unsigned long long cr[4];
+ volatile unsigned long long unused0[4];
+ volatile unsigned long long tr;
+ volatile unsigned long long unused1[2];
+ volatile unsigned long long cmd;
+};
+
+struct tx4927_ebusc_reg {
+ volatile unsigned long long cr[8];
+};
+
+struct tx4927_ccfg_reg {
+ u64 ccfg;
+ u64 crir;
+ u64 pcfg;
+ u64 toea;
+ u64 clkctr;
+ u64 unused0;
+ u64 garbc;
+ u64 unused1;
+ u64 unused2;
+ u64 ramp;
+};
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4927_CCFG_WDRST 0x0000020000000000ULL
+#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL
+#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL
+#define TX4927_CCFG_TINTDIS 0x01000000
+#define TX4927_CCFG_PCI66 0x00800000
+#define TX4927_CCFG_PCIMODE 0x00400000
+#define TX4927_CCFG_DIVMODE_MASK 0x000e0000
+#define TX4927_CCFG_DIVMODE_8 (0x0 << 17)
+#define TX4927_CCFG_DIVMODE_12 (0x1 << 17)
+#define TX4927_CCFG_DIVMODE_16 (0x2 << 17)
+#define TX4927_CCFG_DIVMODE_10 (0x3 << 17)
+#define TX4927_CCFG_DIVMODE_2 (0x4 << 17)
+#define TX4927_CCFG_DIVMODE_3 (0x5 << 17)
+#define TX4927_CCFG_DIVMODE_4 (0x6 << 17)
+#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17)
+#define TX4927_CCFG_BEOW 0x00010000
+#define TX4927_CCFG_WR 0x00008000
+#define TX4927_CCFG_TOE 0x00004000
+#define TX4927_CCFG_PCIARB 0x00002000
+#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800
+#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000
+#define TX4927_CCFG_PCIDIVMODE_3 0x00000800
+#define TX4927_CCFG_PCIDIVMODE_5 0x00001000
+#define TX4927_CCFG_PCIDIVMODE_6 0x00001800
+#define TX4927_CCFG_SYSSP_MASK 0x000000c0
+#define TX4927_CCFG_ENDIAN 0x00000004
+#define TX4927_CCFG_HALT 0x00000002
+#define TX4927_CCFG_ACEHOLD 0x00000001
+#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW)
+
+/* PCFG : Pin Configuration */
+#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000
+#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28)
+#define TX4927_PCFG_SYSCLKEN 0x08000000
+#define TX4927_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
+#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000
+#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4927_PCFG_SEL2 0x00000200
+#define TX4927_PCFG_SEL1 0x00000100
+#define TX4927_PCFG_DMASEL_ALL 0x000000ff
+#define TX4927_PCFG_DMASEL0_MASK 0x00000003
+#define TX4927_PCFG_DMASEL1_MASK 0x0000000c
+#define TX4927_PCFG_DMASEL2_MASK 0x00000030
+#define TX4927_PCFG_DMASEL3_MASK 0x000000c0
+#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000
+#define TX4927_PCFG_DMASEL0_SIO1 0x00000001
+#define TX4927_PCFG_DMASEL0_ACL0 0x00000002
+#define TX4927_PCFG_DMASEL0_ACL2 0x00000003
+#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4927_PCFG_DMASEL1_SIO1 0x00000004
+#define TX4927_PCFG_DMASEL1_ACL1 0x00000008
+#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c
+#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000
+#define TX4927_PCFG_DMASEL3_SIO0 0x00000040
+#define TX4927_PCFG_DMASEL3_ACL3 0x00000080
+#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0
+
+/* CLKCTR : Clock Control */
+#define TX4927_CLKCTR_ACLCKD 0x02000000
+#define TX4927_CLKCTR_PIOCKD 0x01000000
+#define TX4927_CLKCTR_DMACKD 0x00800000
+#define TX4927_CLKCTR_PCICKD 0x00400000
+#define TX4927_CLKCTR_TM0CKD 0x00100000
+#define TX4927_CLKCTR_TM1CKD 0x00080000
+#define TX4927_CLKCTR_TM2CKD 0x00040000
+#define TX4927_CLKCTR_SIO0CKD 0x00020000
+#define TX4927_CLKCTR_SIO1CKD 0x00010000
+#define TX4927_CLKCTR_ACLRST 0x00000200
+#define TX4927_CLKCTR_PIORST 0x00000100
+#define TX4927_CLKCTR_DMARST 0x00000080
+#define TX4927_CLKCTR_PCIRST 0x00000040
+#define TX4927_CLKCTR_TM0RST 0x00000010
+#define TX4927_CLKCTR_TM1RST 0x00000008
+#define TX4927_CLKCTR_TM2RST 0x00000004
+#define TX4927_CLKCTR_SIO0RST 0x00000002
+#define TX4927_CLKCTR_SIO1RST 0x00000001
+
+#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG)
+#define tx4927_pcicptr \
+ ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG)
+#define tx4927_ccfgptr \
+ ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG)
+#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG)
+
+/* utilities */
+static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+ unsigned long flags;
+ local_irq_save(flags);
+#endif
+ ____raw_writeq(____raw_readq(adr) & ~bits, adr);
+#ifdef CONFIG_32BIT
+ local_irq_restore(flags);
+#endif
+}
+static inline void txx9_set64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+ unsigned long flags;
+ local_irq_save(flags);
+#endif
+ ____raw_writeq(____raw_readq(adr) | bits, adr);
+#ifdef CONFIG_32BIT
+ local_irq_restore(flags);
+#endif
+}
+
+/* These functions are not interrupt safe. */
+static inline void tx4927_ccfg_clear(__u64 bits)
+{
+ ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~(TX4927_CCFG_W1CBITS | bits),
+ &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_set(__u64 bits)
+{
+ ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~TX4927_CCFG_W1CBITS) | bits,
+ &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_change(__u64 change, __u64 new)
+{
+ ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~(TX4927_CCFG_W1CBITS | change)) |
+ new,
+ &tx4927_ccfgptr->ccfg);
+}
+
+int tx4927_report_pciclk(void);
+int tx4927_pciclk66_setup(void);
+void tx4927_irq_init(void);
+
+#endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
new file mode 100644
index 00000000000..d61c3d09c4a
--- /dev/null
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -0,0 +1,199 @@
+/*
+ * include/asm-mips/txx9/tx4927pcic.h
+ * TX4927 PCI controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_TX4927PCIC_H
+#define __ASM_TXX9_TX4927PCIC_H
+
+#include <linux/pci.h>
+
+struct tx4927_pcic_reg {
+ u32 pciid;
+ u32 pcistatus;
+ u32 pciccrev;
+ u32 pcicfg1;
+ u32 p2gm0plbase; /* +10 */
+ u32 p2gm0pubase;
+ u32 p2gm1plbase;
+ u32 p2gm1pubase;
+ u32 p2gm2pbase; /* +20 */
+ u32 p2giopbase;
+ u32 unused0;
+ u32 pcisid;
+ u32 unused1; /* +30 */
+ u32 pcicapptr;
+ u32 unused2;
+ u32 pcicfg2;
+ u32 g2ptocnt; /* +40 */
+ u32 unused3[15];
+ u32 g2pstatus; /* +80 */
+ u32 g2pmask;
+ u32 pcisstatus;
+ u32 pcimask;
+ u32 p2gcfg; /* +90 */
+ u32 p2gstatus;
+ u32 p2gmask;
+ u32 p2gccmd;
+ u32 unused4[24]; /* +a0 */
+ u32 pbareqport; /* +100 */
+ u32 pbacfg;
+ u32 pbastatus;
+ u32 pbamask;
+ u32 pbabm; /* +110 */
+ u32 pbacreq;
+ u32 pbacgnt;
+ u32 pbacstate;
+ u64 g2pmgbase[3]; /* +120 */
+ u64 g2piogbase;
+ u32 g2pmmask[3]; /* +140 */
+ u32 g2piomask;
+ u64 g2pmpbase[3]; /* +150 */
+ u64 g2piopbase;
+ u32 pciccfg; /* +170 */
+ u32 pcicstatus;
+ u32 pcicmask;
+ u32 unused5;
+ u64 p2gmgbase[3]; /* +180 */
+ u64 p2giogbase;
+ u32 g2pcfgadrs; /* +1a0 */
+ u32 g2pcfgdata;
+ u32 unused6[8];
+ u32 g2pintack;
+ u32 g2pspc;
+ u32 unused7[12]; /* +1d0 */
+ u64 pdmca; /* +200 */
+ u64 pdmga;
+ u64 pdmpa;
+ u64 pdmctr;
+ u64 pdmcfg; /* +220 */
+ u64 pdmsts;
+};
+
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci_regs.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci_regs.h */
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003
+#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002
+#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */
+#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900
+
+/* bits for PBACFG */
+#define TX4927_PCIC_PBACFG_FIXPA 0x00000008
+#define TX4927_PCIC_PBACFG_RPBA 0x00000004
+#define TX4927_PCIC_PBACFG_PBAEN 0x00000002
+#define TX4927_PCIC_PBACFG_BMCEN 0x00000001
+
+/* bits for PBASTATUS/PBAMASK */
+#define TX4927_PCIC_PBASTATUS_ALL 0x00000001
+#define TX4927_PCIC_PBASTATUS_BM 0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL
+
+/* bits for G2PIOGBASE */
+#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8
+#define TX4927_PCIC_PCICSTATUS_PME 0x00000400
+#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200
+#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100
+#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080
+#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020
+#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010
+#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008
+#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002
+#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001
+
+/* bits for PCICCFG */
+#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000
+#define TX4927_PCIC_PCICCFG_HRST 0x00000800
+#define TX4927_PCIC_PCICCFG_SRST 0x00000400
+#define TX4927_PCIC_PCICCFG_IRBER 0x00000200
+#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch))
+#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100
+#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080
+#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040
+#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020
+#define TX4927_PCIC_PCICCFG_TCAR 0x00000010
+#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL
+
+/* bits for P2GIOGBASE */
+#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL
+
+#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
+#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000
+#define TX4927_PCIC_PDMCFG_EXFER 0x00100000
+#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800
+#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11)
+#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400
+#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200
+#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100
+#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080
+#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040
+#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020
+#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004
+#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008
+#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002
+#define TX4927_PCIC_PDMCFG_CHRST 0x00000001
+
+/* bits for PDMSTS */
+#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000
+#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
+#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000
+#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000
+#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800
+#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400
+#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200
+#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100
+#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080
+#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040
+#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020
+#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008
+#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004
+#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002
+#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001
+#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0
+#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f
+
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+ struct pci_controller *channel);
+void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+ struct pci_controller *channel, int extarb);
+void tx4927_report_pcic_status(void);
+
+#endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/txx9/tx4938.h
index e8807f5c61e..12de68a4c10 100644
--- a/include/asm-mips/tx4938/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -1,5 +1,4 @@
/*
- * linux/include/asm-mips/tx4938/tx4938.h
* Definitions for TX4937/TX4938
* Copyright (C) 2000-2001 Toshiba Corporation
*
@@ -10,17 +9,15 @@
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
-#ifndef __ASM_TX_BOARDS_TX4938_H
-#define __ASM_TX_BOARDS_TX4938_H
+#ifndef __ASM_TXX9_TX4938_H
+#define __ASM_TXX9_TX4938_H
+
+/* some controllers are compatible with 4927 */
+#include <asm/txx9/tx4927.h>
#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr))
#define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b)
-#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG
-
-#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC)
-#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR)
-
#define TX4938_PCIIO_0 0x10000000
#define TX4938_PCIIO_1 0x01010000
#define TX4938_PCIMEM_0 0x08000000
@@ -52,9 +49,6 @@
#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700)
#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800)
-#ifdef __ASSEMBLY__
-#define _CONST64(c) c
-#else
#define _CONST64(c) c##ull
#include <asm/byteorder.h>
@@ -114,68 +108,6 @@ struct tx4938_dma_reg {
endian_def_l2(unused0, mcr);
};
-struct tx4938_pcic_reg {
- volatile unsigned long pciid;
- volatile unsigned long pcistatus;
- volatile unsigned long pciccrev;
- volatile unsigned long pcicfg1;
- volatile unsigned long p2gm0plbase; /* +10 */
- volatile unsigned long p2gm0pubase;
- volatile unsigned long p2gm1plbase;
- volatile unsigned long p2gm1pubase;
- volatile unsigned long p2gm2pbase; /* +20 */
- volatile unsigned long p2giopbase;
- volatile unsigned long unused0;
- volatile unsigned long pcisid;
- volatile unsigned long unused1; /* +30 */
- volatile unsigned long pcicapptr;
- volatile unsigned long unused2;
- volatile unsigned long pcicfg2;
- volatile unsigned long g2ptocnt; /* +40 */
- volatile unsigned long unused3[15];
- volatile unsigned long g2pstatus; /* +80 */
- volatile unsigned long g2pmask;
- volatile unsigned long pcisstatus;
- volatile unsigned long pcimask;
- volatile unsigned long p2gcfg; /* +90 */
- volatile unsigned long p2gstatus;
- volatile unsigned long p2gmask;
- volatile unsigned long p2gccmd;
- volatile unsigned long unused4[24]; /* +a0 */
- volatile unsigned long pbareqport; /* +100 */
- volatile unsigned long pbacfg;
- volatile unsigned long pbastatus;
- volatile unsigned long pbamask;
- volatile unsigned long pbabm; /* +110 */
- volatile unsigned long pbacreq;
- volatile unsigned long pbacgnt;
- volatile unsigned long pbacstate;
- volatile unsigned long long g2pmgbase[3]; /* +120 */
- volatile unsigned long long g2piogbase;
- volatile unsigned long g2pmmask[3]; /* +140 */
- volatile unsigned long g2piomask;
- volatile unsigned long long g2pmpbase[3]; /* +150 */
- volatile unsigned long long g2piopbase;
- volatile unsigned long pciccfg; /* +170 */
- volatile unsigned long pcicstatus;
- volatile unsigned long pcicmask;
- volatile unsigned long unused5;
- volatile unsigned long long p2gmgbase[3]; /* +180 */
- volatile unsigned long long p2giogbase;
- volatile unsigned long g2pcfgadrs; /* +1a0 */
- volatile unsigned long g2pcfgdata;
- volatile unsigned long unused6[8];
- volatile unsigned long g2pintack;
- volatile unsigned long g2pspc;
- volatile unsigned long unused7[12]; /* +1d0 */
- volatile unsigned long long pdmca; /* +200 */
- volatile unsigned long long pdmga;
- volatile unsigned long long pdmpa;
- volatile unsigned long long pdmctr;
- volatile unsigned long long pdmcfg; /* +220 */
- volatile unsigned long long pdmsts;
-};
-
struct tx4938_aclc_reg {
volatile unsigned long acctlen;
volatile unsigned long acctldis;
@@ -263,18 +195,18 @@ struct tx4938_sramc_reg {
};
struct tx4938_ccfg_reg {
- volatile unsigned long long ccfg;
- volatile unsigned long long crir;
- volatile unsigned long long pcfg;
- volatile unsigned long long tear;
- volatile unsigned long long clkctr;
- volatile unsigned long long unused0;
- volatile unsigned long long garbc;
- volatile unsigned long long unused1;
- volatile unsigned long long unused2;
- volatile unsigned long long ramp;
- volatile unsigned long long unused3;
- volatile unsigned long long jmpadr;
+ u64 ccfg;
+ u64 crir;
+ u64 pcfg;
+ u64 toea;
+ u64 clkctr;
+ u64 unused0;
+ u64 garbc;
+ u64 unused1;
+ u64 unused2;
+ u64 ramp;
+ u64 unused3;
+ u64 jmpadr;
};
#undef endian_def_l2
@@ -283,8 +215,6 @@ struct tx4938_ccfg_reg {
#undef endian_def_b2s
#undef endian_def_b4
-#endif /* __ASSEMBLY__ */
-
/*
* NDFMC
*/
@@ -336,6 +266,8 @@ struct tx4938_ccfg_reg {
#define TX4938_IR_ETH0 TX4938_IR_INT(4)
#define TX4938_IR_ETH1 TX4938_IR_INT(3)
+#define TX4938_IRC_INT 2 /* IP[2] in Status register */
+
/*
* CCFG
*/
@@ -361,7 +293,7 @@ struct tx4938_ccfg_reg {
#define TX4938_CCFG_BEOW 0x00010000
#define TX4938_CCFG_WR 0x00008000
#define TX4938_CCFG_TOE 0x00004000
-#define TX4938_CCFG_PCIXARB 0x00002000
+#define TX4938_CCFG_PCIARB 0x00002000
#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00
#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10)
#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10)
@@ -437,110 +369,6 @@ struct tx4938_ccfg_reg {
#define TX4938_CLKCTR_SIO0RST 0x00000002
#define TX4938_CLKCTR_SIO1RST 0x00000001
-/* bits for G2PSTATUS/G2PMASK */
-#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003
-#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002
-#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001
-
-/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */
-#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900
-
-/* bits for PBACFG */
-#define TX4938_PCIC_PBACFG_FIXPA 0x00000008
-#define TX4938_PCIC_PBACFG_RPBA 0x00000004
-#define TX4938_PCIC_PBACFG_PBAEN 0x00000002
-#define TX4938_PCIC_PBACFG_BMCEN 0x00000001
-
-/* bits for G2PMnGBASE */
-#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000)
-#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000)
-
-/* bits for G2PIOGBASE */
-#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000)
-#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000)
-
-/* bits for PCICSTATUS/PCICMASK */
-#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8
-#define TX4938_PCIC_PCICSTATUS_PME 0x00000400
-#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200
-#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100
-#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080
-#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020
-#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010
-#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008
-#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002
-#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001
-
-/* bits for PCICCFG */
-#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000
-#define TX4938_PCIC_PCICCFG_HRST 0x00000800
-#define TX4938_PCIC_PCICCFG_SRST 0x00000400
-#define TX4938_PCIC_PCICCFG_IRBER 0x00000200
-#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch))
-#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100
-#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080
-#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040
-#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020
-#define TX4938_PCIC_PCICCFG_TCAR 0x00000010
-#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008
-
-/* bits for P2GMnGBASE */
-#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000)
-#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000)
-#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000)
-
-/* bits for P2GIOGBASE */
-#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000)
-#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000)
-#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000)
-
-#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
-#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32)
-
-/* bits for PDMCFG */
-#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000
-#define TX4938_PCIC_PDMCFG_EXFER 0x00100000
-#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800
-#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11)
-#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11)
-#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400
-#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200
-#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100
-#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080
-#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040
-#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020
-#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
-#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000
-#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004
-#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008
-#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002
-#define TX4938_PCIC_PDMCFG_CHRST 0x00000001
-
-/* bits for PDMSTS */
-#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000
-#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
-#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000
-#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000
-#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800
-#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400
-#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200
-#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100
-#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080
-#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040
-#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020
-#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008
-#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004
-#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002
-#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001
-#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0
-#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f
-
/*
* DMA
*/
@@ -596,15 +424,15 @@ struct tx4938_ccfg_reg {
#define TX4938_DMA_CSR_DESERR 0x00000002
#define TX4938_DMA_CSR_SORERR 0x00000001
-#ifndef __ASSEMBLY__
-
#define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG)
#define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG)
#define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch))
#define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG)
-#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG)
-#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG)
-#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG)
+#define tx4938_pcicptr tx4927_pcicptr
+#define tx4938_pcic1ptr \
+ ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr \
+ ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG)
#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch))
#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG)
#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG)
@@ -612,17 +440,26 @@ struct tx4938_ccfg_reg {
#define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG)
-#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff)
-#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16)
+#define TX4938_REV_PCODE() \
+ ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16)
+
+#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits)
+#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits)
+#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new)
#define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21)
#define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21)
+#define TX4938_EBUSC_CR(ch) __raw_readq(&tx4938_ebuscptr->cr[(ch)])
#define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20)
#define TX4938_EBUSC_SIZE(ch) \
(0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf))
-
-#endif /* !__ASSEMBLY__ */
+int tx4938_report_pciclk(void);
+void tx4938_report_pci1clk(void);
+int tx4938_pciclk66_setup(void);
+struct pci_dev;
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_irq_init(void);
#endif
diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/txx9/txx927.h
index 25dcf2feb09..97dd7ad1a89 100644
--- a/include/asm-mips/jmr3927/txx927.h
+++ b/include/asm-mips/txx9/txx927.h
@@ -7,8 +7,8 @@
*
* Copyright (C) 2000 Toshiba Corporation
*/
-#ifndef __ASM_TXX927_H
-#define __ASM_TXX927_H
+#ifndef __ASM_TXX9_TXX927_H
+#define __ASM_TXX9_TXX927_H
struct txx927_sio_reg {
volatile unsigned long lcr;
@@ -118,4 +118,4 @@ struct txx927_sio_reg {
* PIO
*/
-#endif /* __ASM_TXX927_H */
+#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h
deleted file mode 100644
index 42300037d59..00000000000
--- a/include/asm-mips/vr41xx/cmbvr4133.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-mips/vr41xx/cmbvr4133.h
- *
- * Include file for NEC CMB-VR4133.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- * Jun Sun <jsun@mvista.com, or source@mvista.com> and
- * Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __NEC_CMBVR4133_H
-#define __NEC_CMBVR4133_H
-
-#include <asm/vr41xx/irq.h>
-
-/*
- * General-Purpose I/O Pin Number
- */
-#define CMBVR41XX_INTA_PIN 1
-#define CMBVR41XX_INTB_PIN 1
-#define CMBVR41XX_INTC_PIN 3
-#define CMBVR41XX_INTD_PIN 1
-#define CMBVR41XX_INTE_PIN 1
-
-/*
- * Interrupt Number
- */
-#define CMBVR41XX_INTA_IRQ GIU_IRQ(CMBVR41XX_INTA_PIN)
-#define CMBVR41XX_INTB_IRQ GIU_IRQ(CMBVR41XX_INTB_PIN)
-#define CMBVR41XX_INTC_IRQ GIU_IRQ(CMBVR41XX_INTC_PIN)
-#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN)
-#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN)
-
-#define I8259A_IRQ_BASE 72
-#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x))
-#define TIMER_IRQ I8259_IRQ(0)
-#define KEYBOARD_IRQ I8259_IRQ(1)
-#define I8259_SLAVE_IRQ I8259_IRQ(2)
-#define UART3_IRQ I8259_IRQ(3)
-#define UART1_IRQ I8259_IRQ(4)
-#define UART2_IRQ I8259_IRQ(5)
-#define FDC_IRQ I8259_IRQ(6)
-#define PARPORT_IRQ I8259_IRQ(7)
-#define RTC_IRQ I8259_IRQ(8)
-#define USB_IRQ I8259_IRQ(9)
-#define I8259_INTA_IRQ I8259_IRQ(10)
-#define AUDIO_IRQ I8259_IRQ(11)
-#define AUX_IRQ I8259_IRQ(12)
-#define IDE_PRIMARY_IRQ I8259_IRQ(14)
-#define IDE_SECONDARY_IRQ I8259_IRQ(15)
-
-#endif /* __NEC_CMBVR4133_H */
diff --git a/include/asm-parisc/smp.h b/include/asm-parisc/smp.h
index 306f4950e32..398cdbaf4e5 100644
--- a/include/asm-parisc/smp.h
+++ b/include/asm-parisc/smp.h
@@ -30,6 +30,9 @@ extern cpumask_t cpu_online_map;
extern void smp_send_reschedule(int cpu);
extern void smp_send_all_nop(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
#endif /* !ASSEMBLY */
/*
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index bca352e033c..04ce8f8a2ee 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -2,7 +2,6 @@ include include/asm-generic/Kbuild.asm
header-y += auxvec.h
header-y += ioctls.h
-header-y += mman.h
header-y += sembuf.h
header-y += siginfo.h
header-y += stat.h
@@ -23,7 +22,6 @@ header-y += sigcontext.h
header-y += statfs.h
header-y += ps3fb.h
-unifdef-y += asm-compat.h
unifdef-y += bootx.h
unifdef-y += byteorder.h
unifdef-y += cputable.h
diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h
index c19e7367fce..8ec2e1da68b 100644
--- a/include/asm-powerpc/asm-compat.h
+++ b/include/asm-powerpc/asm-compat.h
@@ -15,57 +15,6 @@
#endif
-/*
- * Feature section common macros
- *
- * Note that the entries now contain offsets between the table entry
- * and the code rather than absolute code pointers in order to be
- * useable with the vdso shared library. There is also an assumption
- * that values will be negative, that is, the fixup table has to be
- * located after the code it fixes up.
- */
-#ifdef CONFIG_PPC64
-#ifdef __powerpc64__
-/* 64 bits kernel, 64 bits code */
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \
-99: \
- .section sect,"a"; \
- .align 3; \
-98: \
- .llong msk; \
- .llong val; \
- .llong label##b-98b; \
- .llong 99b-98b; \
- .previous
-#else /* __powerpc64__ */
-/* 64 bits kernel, 32 bits code (ie. vdso32) */
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \
-99: \
- .section sect,"a"; \
- .align 3; \
-98: \
- .llong msk; \
- .llong val; \
- .long 0xffffffff; \
- .long label##b-98b; \
- .long 0xffffffff; \
- .long 99b-98b; \
- .previous
-#endif /* !__powerpc64__ */
-#else /* CONFIG_PPC64 */
-/* 32 bits kernel, 32 bits code */
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \
-99: \
- .section sect,"a"; \
- .align 2; \
-98: \
- .long msk; \
- .long val; \
- .long label##b-98b; \
- .long 99b-98b; \
- .previous
-#endif /* !CONFIG_PPC64 */
-
#ifdef __powerpc64__
/* operations for longs and pointers */
diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h
index 53507046a1b..81de6eb3455 100644
--- a/include/asm-powerpc/cache.h
+++ b/include/asm-powerpc/cache.h
@@ -8,6 +8,9 @@
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
#define L1_CACHE_SHIFT 4
#define MAX_COPY_PREFETCH 1
+#elif defined(CONFIG_PPC_E500MC)
+#define L1_CACHE_SHIFT 6
+#define MAX_COPY_PREFETCH 4
#elif defined(CONFIG_PPC32)
#define L1_CACHE_SHIFT 5
#define MAX_COPY_PREFETCH 4
diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h
new file mode 100644
index 00000000000..107d9b915e3
--- /dev/null
+++ b/include/asm-powerpc/code-patching.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_CODE_PATCHING_H
+#define _ASM_POWERPC_CODE_PATCHING_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+#define PPC_NOP_INSTR 0x60000000
+#define PPC_LWSYNC_INSTR 0x7c2004ac
+
+/* Flags for create_branch:
+ * "b" == create_branch(addr, target, 0);
+ * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE);
+ * "bl" == create_branch(addr, target, BRANCH_SET_LINK);
+ * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
+ */
+#define BRANCH_SET_LINK 0x1
+#define BRANCH_ABSOLUTE 0x2
+
+unsigned int create_branch(const unsigned int *addr,
+ unsigned long target, int flags);
+unsigned int create_cond_branch(const unsigned int *addr,
+ unsigned long target, int flags);
+void patch_branch(unsigned int *addr, unsigned long target, int flags);
+void patch_instruction(unsigned int *addr, unsigned int instr);
+
+int instr_is_relative_branch(unsigned int instr);
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
+unsigned long branch_target(const unsigned int *instr);
+unsigned int translate_branch(const unsigned int *dest,
+ const unsigned int *src);
+
+static inline unsigned long ppc_function_entry(void *func)
+{
+#ifdef CONFIG_PPC64
+ /*
+ * On PPC64 the function pointer actually points to the function's
+ * descriptor. The first entry in the descriptor is the address
+ * of the function text.
+ */
+ return ((func_descr_t *)func)->entry;
+#else
+ return (unsigned long)func;
+#endif
+}
+
+#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index ede38ffe466..63a55337c2d 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -96,6 +96,7 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
int cpm_command(u32 command, u8 opcode);
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
index 3df43967800..2ff798744c1 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/include/asm-powerpc/cpm1.h
@@ -42,35 +42,15 @@
#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)0x0800)
-#define CPM_DATAONLY_SIZE ((uint)0x0700)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-#endif
-
/* Export the base address of the communication processor registers
* and dual port ram.
*/
extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
#define cpm_dpalloc cpm_muram_alloc
#define cpm_dpfree cpm_muram_free
#define cpm_dpram_addr cpm_muram_addr
#define cpm_dpram_phys cpm_muram_dma
-#else
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8 *addr);
-#endif
extern void cpm_setbrg(uint brg, uint rate);
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 4c85ed9cd43..2c7fd9cee29 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -78,24 +78,6 @@
#define mk_cr_cmd(PG, SBC, MCN, OP) \
((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
-#else
-#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
-#endif
-#endif
-
/* The number of pages of host memory we allocate for CPM. This is
* done early in kernel initialization to get physically contiguous
* pages.
@@ -107,17 +89,9 @@
*/
extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
#define cpm_dpalloc cpm_muram_alloc
#define cpm_dpfree cpm_muram_free
#define cpm_dpram_addr cpm_muram_addr
-#else
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-#endif
extern void cpm_setbrg(uint brg, uint rate);
extern void cpm2_fastbrg(uint brg, uint rate, int div16);
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 1e79673b731..2a3e9075a5a 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -1,8 +1,6 @@
#ifndef __ASM_POWERPC_CPUTABLE_H
#define __ASM_POWERPC_CPUTABLE_H
-#include <asm/asm-compat.h>
-
#define PPC_FEATURE_32 0x80000000
#define PPC_FEATURE_64 0x40000000
#define PPC_FEATURE_601_INSTR 0x20000000
@@ -26,11 +24,20 @@
#define PPC_FEATURE_PA6T 0x00000800
#define PPC_FEATURE_HAS_DFP 0x00000400
#define PPC_FEATURE_POWER6_EXT 0x00000200
+#define PPC_FEATURE_ARCH_2_06 0x00000100
+#define PPC_FEATURE_HAS_VSX 0x00000080
+
+#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
+ 0x00000040
#define PPC_FEATURE_TRUE_LE 0x00000002
#define PPC_FEATURE_PPC_LE 0x00000001
#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
#ifndef __ASSEMBLY__
/* This structure can grow, it's real size is used by head.S code
@@ -132,7 +139,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTR_TAU ASM_CONST(0x0000000000000010)
#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020)
#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)
-#define CPU_FTR_604_PERF_MON ASM_CONST(0x0000000000000080)
+#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)
#define CPU_FTR_601 ASM_CONST(0x0000000000000100)
#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200)
#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)
@@ -152,6 +159,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000)
#define CPU_FTR_SPE ASM_CONST(0x0000000002000000)
#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000)
+#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000)
/*
* Add the 64-bit processor unique features in the top half of the word;
@@ -180,6 +188,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000)
#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000)
+#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000)
+#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000)
#ifndef __ASSEMBLY__
@@ -198,6 +208,17 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define PPC_FEATURE_HAS_ALTIVEC_COMP 0
#endif
+/* We only set the VSX features if the kernel was compiled with VSX
+ * support
+ */
+#ifdef CONFIG_VSX
+#define CPU_FTR_VSX_COMP CPU_FTR_VSX
+#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
+#else
+#define CPU_FTR_VSX_COMP 0
+#define PPC_FEATURE_HAS_VSX_COMP 0
+#endif
+
/* We only set the spe features if the kernel was compiled with spe
* support
*/
@@ -245,8 +266,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_604 (CPU_FTR_COMMON | \
- CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE | \
- CPU_FTR_PPC_LE)
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
@@ -347,40 +367,50 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
- CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
+ CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
-#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
CPU_FTR_MMCRA | CPU_FTR_CTRL)
-#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA)
-#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
-#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR)
-#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR)
-#define CPU_FTRS_CELL (CPU_FTR_USE_TB | \
+#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_MMCRA | CPU_FTR_SMT | \
+ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+ CPU_FTR_DSCR | CPU_FTR_SAO)
+#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
-#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | \
+#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
@@ -391,7 +421,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
- CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT)
+ CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
+ CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
#else
enum {
CPU_FTRS_POSSIBLE =
@@ -421,7 +452,7 @@ enum {
CPU_FTRS_E200 |
#endif
#ifdef CONFIG_E500
- CPU_FTRS_E500 | CPU_FTRS_E500_2 |
+ CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
#endif
0,
};
@@ -431,7 +462,7 @@ enum {
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
- CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
+ CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
#else
enum {
CPU_FTRS_ALWAYS =
@@ -461,7 +492,7 @@ enum {
CPU_FTRS_E200 &
#endif
#ifdef CONFIG_E500
- CPU_FTRS_E500 & CPU_FTRS_E500_2 &
+ CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
#endif
CPU_FTRS_POSSIBLE,
};
@@ -477,18 +508,5 @@ static inline int cpu_has_feature(unsigned long feature)
#endif /* !__ASSEMBLY__ */
-#ifdef __ASSEMBLY__
-
-#define BEGIN_FTR_SECTION_NESTED(label) label:
-#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97)
-#define END_FTR_SECTION_NESTED(msk, val, label) \
- MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
-#define END_FTR_SECTION(msk, val) \
- END_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk))
-#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0)
-#endif /* __ASSEMBLY__ */
-
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h
new file mode 100644
index 00000000000..35b71599ec4
--- /dev/null
+++ b/include/asm-powerpc/dcr-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_GENERIC_H
+#define _ASM_POWERPC_DCR_GENERIC_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
+
+typedef struct {
+ enum host_type_t type;
+ union {
+ dcr_host_mmio_t mmio;
+ dcr_host_native_t native;
+ } host;
+} dcr_host_t;
+
+extern bool dcr_map_ok_generic(dcr_host_t host);
+
+extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
+ unsigned int dcr_c);
+extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
+
+extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
+
+extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_GENERIC_H */
+
+
diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h
index 08532ff1899..acd491dbd45 100644
--- a/include/asm-powerpc/dcr-mmio.h
+++ b/include/asm-powerpc/dcr-mmio.h
@@ -27,20 +27,26 @@ typedef struct {
void __iomem *token;
unsigned int stride;
unsigned int base;
-} dcr_host_t;
+} dcr_host_mmio_t;
-#define DCR_MAP_OK(host) ((host).token != NULL)
+static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
+{
+ return host.token != NULL;
+}
-extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
- unsigned int dcr_c);
-extern void dcr_unmap(dcr_host_t host, unsigned int dcr_c);
+extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+ unsigned int dcr_n,
+ unsigned int dcr_c);
+extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
-static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n)
+static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
{
return in_be32(host.token + ((host.base + dcr_n) * host.stride));
}
-static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value)
+static inline void dcr_write_mmio(dcr_host_mmio_t host,
+ unsigned int dcr_n,
+ u32 value)
{
out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
}
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index f8398ce8037..72d2b72c739 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -26,14 +26,18 @@
typedef struct {
unsigned int base;
-} dcr_host_t;
+} dcr_host_native_t;
-#define DCR_MAP_OK(host) (1)
+static inline bool dcr_map_ok_native(dcr_host_native_t host)
+{
+ return 1;
+}
-#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base = (dcr_n) })
-#define dcr_unmap(host, dcr_c) do {} while (0)
-#define dcr_read(host, dcr_n) mfdcr(dcr_n + host.base)
-#define dcr_write(host, dcr_n, value) mtdcr(dcr_n + host.base, value)
+#define dcr_map_native(dev, dcr_n, dcr_c) \
+ ((dcr_host_native_t){ .base = (dcr_n) })
+#define dcr_unmap_native(host, dcr_c) do {} while (0)
+#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base)
+#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value)
/* Device Control Registers */
void __mtdcr(int reg, unsigned int val);
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
index 9338d50538f..53b283050ab 100644
--- a/include/asm-powerpc/dcr.h
+++ b/include/asm-powerpc/dcr.h
@@ -20,14 +20,50 @@
#ifndef _ASM_POWERPC_DCR_H
#define _ASM_POWERPC_DCR_H
#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
#ifdef CONFIG_PPC_DCR
#ifdef CONFIG_PPC_DCR_NATIVE
#include <asm/dcr-native.h>
-#else
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
#include <asm/dcr-mmio.h>
#endif
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host) dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host) dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host) dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
/*
* On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
* base from the device-tree
@@ -41,5 +77,6 @@ extern unsigned int dcr_resource_len(struct device_node *np,
#endif /* CONFIG_PPC_MERGE */
#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index bbefb69bfb6..74c54978098 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -13,6 +13,7 @@
/* need struct page definitions */
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
#include <asm/io.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
@@ -44,6 +45,15 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
#endif /* ! CONFIG_NOT_COHERENT_CACHE */
#ifdef CONFIG_PPC64
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+ if (dev->dma_mask && *dev->dma_mask)
+ return *dev->dma_mask;
+ /* Assume devices without mask can take 32 bit addresses */
+ return 0xfffffffful;
+}
+
/*
* DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
*/
@@ -53,13 +63,17 @@ struct dma_mapping_ops {
void (*free_coherent)(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
dma_addr_t (*map_single)(struct device *dev, void *ptr,
- size_t size, enum dma_data_direction direction);
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction direction);
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
int (*map_sg)(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction);
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction);
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
int (*dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 dma_mask);
};
@@ -109,6 +123,77 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
return 0;
}
+static inline dma_addr_t dma_map_single_attrs(struct device *dev,
+ void *cpu_addr,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev,
+ dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+}
+
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+ struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ return dma_ops->map_single(dev, page_address(page) + offset, size,
+ direction, attrs);
+}
+
+static inline void dma_unmap_page_attrs(struct device *dev,
+ dma_addr_t dma_address,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ return dma_ops->map_sg(dev, sg, nents, direction, attrs);
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev,
+ struct scatterlist *sg,
+ int nhwentries,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
+}
+
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
@@ -131,63 +216,43 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
size_t size,
enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- return dma_ops->map_single(dev, cpu_addr, size, direction);
+ return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
}
static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
size_t size,
enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- dma_ops->unmap_single(dev, dma_addr, size, direction);
+ dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
}
static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- return dma_ops->map_single(dev, page_address(page) + offset, size,
- direction);
+ return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
}
static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
size_t size,
enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- dma_ops->unmap_single(dev, dma_address, size, direction);
+ dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
}
static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- return dma_ops->map_sg(dev, sg, nents, direction);
+ return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
}
static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries,
enum dma_data_direction direction)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- dma_ops->unmap_sg(dev, sg, nhwentries, direction);
+ dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
}
-
/*
* Available generic sets of operations
*/
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index 9080d85cb9d..89664675b46 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -109,6 +109,7 @@ typedef elf_gregset_t32 compat_elf_gregset_t;
#ifdef __powerpc64__
# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */
# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32 /* Half the vsx registers */
# define ELF_GREG_TYPE elf_greg_t64
#else
# define ELF_NEVRREG 34 /* includes acc (as 2) */
@@ -158,6 +159,7 @@ typedef __vector128 elf_vrreg_t;
typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
#ifdef __powerpc64__
typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
#endif
#ifdef __KERNEL__
@@ -202,30 +204,8 @@ static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
}
#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
-static inline int dump_task_regs(struct task_struct *tsk,
- elf_gregset_t *elf_regs)
-{
- struct pt_regs *regs = tsk->thread.regs;
- if (regs)
- ppc_elf_core_copy_regs(*elf_regs, regs);
-
- return 1;
-}
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-
-extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
typedef elf_vrregset_t elf_fpxregset_t;
-#ifdef CONFIG_ALTIVEC
-extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs);
-#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_altivec(tsk, regs)
-#define ELF_CORE_XFPREG_TYPE NT_PPC_VMX
-#endif
-
-#endif /* __KERNEL__ */
-
/* ELF_HWCAP yields a mask that user programs can use to figure out what
instruction set this cpu supports. This could be done in userspace,
but it's not easy, and we've already done it here. */
@@ -243,8 +223,6 @@ extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs);
} while (0)
#endif /* __powerpc64__ */
-#ifdef __KERNEL__
-
#ifdef __powerpc64__
# define SET_PERSONALITY(ex, ibcs2) \
do { \
@@ -257,7 +235,8 @@ do { \
else \
clear_thread_flag(TIF_ABI_PENDING); \
if (personality(current->personality) != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ set_personality(PER_LINUX | \
+ (current->personality & (~PER_MASK))); \
} while (0)
/*
* An executable for which elf_read_implies_exec() returns TRUE will
@@ -272,8 +251,6 @@ do { \
# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
#endif /* __powerpc64__ */
-#endif /* __KERNEL__ */
-
extern int dcache_bsize;
extern int icache_bsize;
extern int ucache_bsize;
@@ -285,6 +262,8 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
int executable_stack);
#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+#endif /* __KERNEL__ */
+
/*
* The requirements here are:
* - keep the final alignment of sp (sp & 0xf)
@@ -422,6 +401,8 @@ do { \
/* Keep this the last entry. */
#define R_PPC64_NUM 107
+#ifdef __KERNEL__
+
#ifdef CONFIG_SPU_BASE
/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
#define NT_SPU 1
@@ -430,4 +411,6 @@ do { \
#endif /* CONFIG_SPU_BASE */
+#endif /* __KERNEL */
+
#endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h
new file mode 100644
index 00000000000..a1029967620
--- /dev/null
+++ b/include/asm-powerpc/feature-fixups.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
+#define __ASM_POWERPC_FEATURE_FIXUPS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * Feature section common macros
+ *
+ * Note that the entries now contain offsets between the table entry
+ * and the code rather than absolute code pointers in order to be
+ * useable with the vdso shared library. There is also an assumption
+ * that values will be negative, that is, the fixup table has to be
+ * located after the code it fixes up.
+ */
+#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
+/* 64 bits kernel, 32 bits code (ie. vdso32) */
+#define FTR_ENTRY_LONG .llong
+#define FTR_ENTRY_OFFSET .long 0xffffffff; .long
+#else
+/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
+#define FTR_ENTRY_LONG PPC_LONG
+#define FTR_ENTRY_OFFSET PPC_LONG
+#endif
+
+#define START_FTR_SECTION(label) label##1:
+
+#define FTR_SECTION_ELSE_NESTED(label) \
+label##2: \
+ .pushsection __ftr_alt_##label,"a"; \
+ .align 2; \
+label##3:
+
+#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \
+label##4: \
+ .popsection; \
+ .pushsection sect,"a"; \
+ .align 3; \
+label##5: \
+ FTR_ENTRY_LONG msk; \
+ FTR_ENTRY_LONG val; \
+ FTR_ENTRY_OFFSET label##1b-label##5b; \
+ FTR_ENTRY_OFFSET label##2b-label##5b; \
+ FTR_ENTRY_OFFSET label##3b-label##5b; \
+ FTR_ENTRY_OFFSET label##4b-label##5b; \
+ .popsection;
+
+
+/* CPU feature dependent sections */
+#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label)
+#define BEGIN_FTR_SECTION START_FTR_SECTION(97)
+
+#define END_FTR_SECTION_NESTED(msk, val, label) \
+ FTR_SECTION_ELSE_NESTED(label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+
+#define END_FTR_SECTION(msk, val) \
+ END_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0)
+
+/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
+#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \
+ ALT_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \
+ ALT_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FTR_SECTION_END(msk, val) \
+ ALT_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FTR_SECTION_END_IFSET(msk) \
+ ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FTR_SECTION_END_IFCLR(msk) \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+/* Firmware feature dependent sections */
+#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label)
+#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97)
+
+#define END_FW_FTR_SECTION_NESTED(msk, val, label) \
+ FTR_SECTION_ELSE_NESTED(label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+
+#define END_FW_FTR_SECTION(msk, val) \
+ END_FW_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk))
+#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0)
+
+/* Firmware feature sections with alternatives */
+#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label)
+#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \
+ ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \
+ ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FW_FTR_SECTION_END(msk, val) \
+ ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FW_FTR_SECTION_END_IFSET(msk) \
+ ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \
+ ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+#endif /* __ASSEMBLY__ */
+
+/* LWSYNC feature sections */
+#define START_LWSYNC_SECTION(label) label##1:
+#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \
+label##2: \
+ .pushsection sect,"a"; \
+ .align 2; \
+label##3: \
+ .long label##1b-label##3b; \
+ .popsection;
+
+#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index 1e41bd1c850..ef328995ba9 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -15,6 +15,7 @@
#ifdef __KERNEL__
#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
/* firmware feature bitmask values */
#define FIRMWARE_MAX_FEATURES 63
@@ -125,18 +126,6 @@ extern int fwnmi_active;
extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
-#else /* __ASSEMBLY__ */
-
-#define BEGIN_FW_FTR_SECTION_NESTED(label) label:
-#define BEGIN_FW_FTR_SECTION BEGIN_FW_FTR_SECTION_NESTED(97)
-#define END_FW_FTR_SECTION_NESTED(msk, val, label) \
- MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
-#define END_FW_FTR_SECTION(msk, val) \
- END_FW_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk))
-#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0)
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h
new file mode 100644
index 00000000000..8e8c9b5032d
--- /dev/null
+++ b/include/asm-powerpc/fsl_gtm.h
@@ -0,0 +1,47 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_FSL_GTM_H
+#define __ASM_FSL_GTM_H
+
+#include <linux/types.h>
+
+struct gtm;
+
+struct gtm_timer {
+ unsigned int irq;
+
+ struct gtm *gtm;
+ bool requested;
+ u8 __iomem *gtcfr;
+ __be16 __iomem *gtmdr;
+ __be16 __iomem *gtpsr;
+ __be16 __iomem *gtcnr;
+ __be16 __iomem *gtrfr;
+ __be16 __iomem *gtevr;
+};
+
+extern struct gtm_timer *gtm_get_timer16(void);
+extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+ unsigned int timer);
+extern void gtm_put_timer16(struct gtm_timer *tmr);
+extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
+ bool reload);
+extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
+ bool reload);
+extern void gtm_stop_timer16(struct gtm_timer *tmr);
+extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
+
+#endif /* __ASM_FSL_GTM_H */
diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h
new file mode 100644
index 00000000000..de921326cca
--- /dev/null
+++ b/include/asm-powerpc/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_POWERPC_FTRACE
+#define _ASM_POWERPC_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR ((long)(_mcount))
+#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_POWERPC_FTRACE */
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index 649c6c3b87b..be32ff02f4a 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -49,12 +49,6 @@ static inline pte_t huge_pte_wrprotect(pte_t pte)
return pte_wrprotect(pte);
}
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- ptep_set_wrprotect(mm, addr, ptep);
-}
-
static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
index ad8c9f7fd0e..f75a5fc64d2 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/include/asm-powerpc/hw_irq.h
@@ -59,6 +59,11 @@ extern void iseries_handle_interrupts(void);
get_paca()->hard_enabled = 0; \
} while(0)
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+ return flags == 0;
+}
+
#else
#if defined(CONFIG_BOOKE)
@@ -113,6 +118,11 @@ static inline void local_irq_save_ptr(unsigned long *flags)
#define hard_irq_enable() local_irq_enable()
#define hard_irq_disable() local_irq_disable()
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+ return (flags & MSR_EE) == 0;
+}
+
#endif /* CONFIG_PPC64 */
/*
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index 89189488e28..8b627823f5f 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -95,33 +95,60 @@ extern resource_size_t isa_mem_base;
#define IO_SET_SYNC_FLAG()
#endif
-#define DEF_MMIO_IN(name, type, insn) \
-static inline type name(const volatile type __iomem *addr) \
+/* gcc 4.0 and older doesn't have 'Z' constraint */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
+#define DEF_MMIO_IN_LE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
{ \
- type ret; \
- __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \
: "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
return ret; \
}
-#define DEF_MMIO_OUT(name, type, insn) \
-static inline void name(volatile type __iomem *addr, type val) \
+#define DEF_MMIO_OUT_LE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
{ \
- __asm__ __volatile__("sync;" insn \
+ __asm__ __volatile__("sync;"#insn" %1,0,%2" \
: "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
IO_SET_SYNC_FLAG(); \
}
+#else /* newer gcc */
+#define DEF_MMIO_IN_LE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
+{ \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
+ : "=r" (ret) : "Z" (*addr) : "memory"); \
+ return ret; \
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
+{ \
+ __asm__ __volatile__("sync;"#insn" %1,%y0" \
+ : "=Z" (*addr) : "r" (val) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
+}
+#endif
+#define DEF_MMIO_IN_BE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
+{ \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
+ : "=r" (ret) : "m" (*addr) : "memory"); \
+ return ret; \
+}
-#define DEF_MMIO_IN_BE(name, size, insn) \
- DEF_MMIO_IN(name, u##size, __stringify(insn)"%U2%X2 %0,%2")
-#define DEF_MMIO_IN_LE(name, size, insn) \
- DEF_MMIO_IN(name, u##size, __stringify(insn)" %0,0,%1")
+#define DEF_MMIO_OUT_BE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
+{ \
+ __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
+ : "=m" (*addr) : "r" (val) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
+}
-#define DEF_MMIO_OUT_BE(name, size, insn) \
- DEF_MMIO_OUT(name, u##size, __stringify(insn)"%U0%X0 %1,%0")
-#define DEF_MMIO_OUT_LE(name, size, insn) \
- DEF_MMIO_OUT(name, u##size, __stringify(insn)" %1,0,%2")
DEF_MMIO_IN_BE(in_8, 8, lbz);
DEF_MMIO_IN_BE(in_be16, 16, lhz);
@@ -745,7 +772,7 @@ static inline void * bus_to_virt(unsigned long address)
#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
-#define clrsetbits_le16(addr, clear, set) clrsetbits(le32, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h
index 8eb99848c40..57d68304218 100644
--- a/include/asm-powerpc/ioctl.h
+++ b/include/asm-powerpc/ioctl.h
@@ -1,69 +1,13 @@
#ifndef _ASM_POWERPC_IOCTL_H
#define _ASM_POWERPC_IOCTL_H
-
-/*
- * this was copied from the alpha as it's a bit cleaner there.
- * -- Cort
- */
-
-#define _IOC_NRBITS 8
-#define _IOC_TYPEBITS 8
#define _IOC_SIZEBITS 13
#define _IOC_DIRBITS 3
-#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT 0
-#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
-#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
-#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
-
-/*
- * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
- * And this turns out useful to catch old ioctl numbers in header
- * files for us.
- */
#define _IOC_NONE 1U
#define _IOC_READ 2U
#define _IOC_WRITE 4U
-#define _IOC(dir,type,nr,size) \
- (((dir) << _IOC_DIRSHIFT) | \
- ((type) << _IOC_TYPESHIFT) | \
- ((nr) << _IOC_NRSHIFT) | \
- ((size) << _IOC_SIZESHIFT))
-
-/* provoke compile error for invalid uses of size argument */
-extern unsigned int __invalid_size_argument_for_IOC;
-#define _IOC_TYPECHECK(t) \
- ((sizeof(t) == sizeof(t[1]) && \
- sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
- sizeof(t) : __invalid_size_argument_for_IOC)
-
-/* used to create numbers */
-#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* used to decode them.. */
-#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
-#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
-
-/* various drivers, such as the pcmcia stuff, need these... */
-#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+#include <asm-generic/ioctl.h>
#endif /* _ASM_POWERPC_IOCTL_H */
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
index 852e15f51a1..51ecfef8d84 100644
--- a/include/asm-powerpc/iommu.h
+++ b/include/asm-powerpc/iommu.h
@@ -79,11 +79,13 @@ extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
int nid);
-extern int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, unsigned long mask,
- enum dma_data_direction direction);
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+ struct scatterlist *sglist, int nelems,
+ unsigned long mask, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction);
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
size_t size, dma_addr_t *dma_handle,
@@ -92,9 +94,11 @@ extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
void *vaddr, dma_addr_t dma_handle);
extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
void *vaddr, size_t size, unsigned long mask,
- enum dma_data_direction direction);
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction);
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void iommu_init_early_pSeries(void);
extern void iommu_init_early_iSeries(void);
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 5089deb8fec..1ef8e304e0e 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -619,6 +619,19 @@ struct pt_regs;
#define __ARCH_HAS_DO_SOFTIRQ
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
#ifdef CONFIG_IRQSTACKS
/*
* Per-cpu stacks for handling hard and soft interrupts.
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
index 701857bc8e2..acdcdc66f1b 100644
--- a/include/asm-powerpc/kexec.h
+++ b/include/asm-powerpc/kexec.h
@@ -34,6 +34,8 @@
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
+typedef void (*crash_shutdown_t)(void);
+
#ifdef CONFIG_KEXEC
#ifdef __powerpc64__
@@ -123,7 +125,6 @@ struct pt_regs;
extern void default_machine_kexec(struct kimage *image);
extern int default_machine_kexec_prepare(struct kimage *image);
extern void default_machine_crash_shutdown(struct pt_regs *regs);
-typedef void (*crash_shutdown_t)(void);
extern int crash_shutdown_register(crash_shutdown_t handler);
extern int crash_shutdown_unregister(crash_shutdown_t handler);
@@ -143,6 +144,16 @@ static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
static inline void reserve_crashkernel(void) { ; }
+static inline int crash_shutdown_register(crash_shutdown_t handler)
+{
+ return 0;
+}
+
+static inline int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+ return 0;
+}
+
#endif /* CONFIG_KEXEC */
#endif /* ! __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 54ed64df95b..989922621e3 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -262,6 +262,7 @@ struct machdep_calls {
#endif
};
+extern void e500_idle(void);
extern void power4_idle(void);
extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void);
diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h
index 24cf664a829..9209f755763 100644
--- a/include/asm-powerpc/mman.h
+++ b/include/asm-powerpc/mman.h
@@ -10,6 +10,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define PROT_SAO 0x10 /* Strong Access Ordering */
+
#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
#define MAP_LOCKED 0x80
@@ -24,4 +26,38 @@
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#include <asm/cputable.h>
+#include <linux/mm.h>
+
+/*
+ * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
+ * here. How important is the optimization?
+ */
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
+{
+ return (prot & PROT_SAO) ? VM_SAO : 0;
+}
+#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
+
+static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
+{
+ return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+}
+#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
+
+static inline int arch_validate_prot(unsigned long prot)
+{
+ if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
+ return 0;
+ if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
+ return 0;
+ return 1;
+}
+#define arch_validate_prot(prot) arch_validate_prot(prot)
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MMAN_H */
diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h
index 6e21ca618ec..16b1a1e77e6 100644
--- a/include/asm-powerpc/mmu-hash32.h
+++ b/include/asm-powerpc/mmu-hash32.h
@@ -28,24 +28,18 @@
#define BPP_RW 0x02 /* Read/write */
#ifndef __ASSEMBLY__
+/* Contort a phys_addr_t into the right format/bits for a BAT */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
+ ((x & 0x0000000e00000000ULL) >> 24) | \
+ ((x & 0x0000000100000000ULL) >> 30)))
+#else
+#define BAT_PHYS_ADDR(x) (x)
+#endif
+
struct ppc_bat {
- struct {
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :4; /* Unused */
- unsigned long bl:11; /* Block size mask */
- unsigned long vs:1; /* Supervisor valid */
- unsigned long vp:1; /* User valid */
- } batu; /* Upper register */
- struct {
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long w:1; /* Write-thru cache */
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded (MBZ in IBAT) */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page access protections */
- } batl; /* Lower register */
+ u32 batu;
+ u32 batl;
};
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index 39c5c5f62bf..d1dc16afb11 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -182,6 +182,7 @@ extern int mmu_io_psize;
extern int mmu_kernel_ssize;
extern int mmu_highuser_ssize;
extern u16 mmu_slb_size;
+extern unsigned long tce_alloc_start, tce_alloc_end;
/*
* If the processor supports 64k normal pages but not 64k cache
diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h
new file mode 100644
index 00000000000..effc2291beb
--- /dev/null
+++ b/include/asm-powerpc/mpc6xx.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_POWERPC_MPC6xx_H
+#define __ASM_POWERPC_MPC6xx_H
+
+void mpc6xx_enter_standby(void);
+
+#endif
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index a4d0f876b42..fe566a348a8 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -353,6 +353,8 @@ struct mpic
#define MPIC_ENABLE_MCK 0x00000200
/* Disable bias among target selection, spread interrupts evenly */
#define MPIC_NO_BIAS 0x00000400
+/* Ignore NIRQS as reported by FRR */
+#define MPIC_BROKEN_FRR_NIRQS 0x00000800
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h
index 6526e139a46..3c123990ca2 100644
--- a/include/asm-powerpc/of_device.h
+++ b/include/asm-powerpc/of_device.h
@@ -21,8 +21,6 @@ extern struct of_device *of_device_alloc(struct device_node *np,
const char *bus_id,
struct device *parent);
-extern ssize_t of_device_get_modalias(struct of_device *ofdev,
- char *str, ssize_t len);
extern int of_device_uevent(struct device *dev,
struct kobj_uevent_env *env);
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h
index ea6cfb8efb8..e482e5352e6 100644
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ b/include/asm-powerpc/pSeries_reconfig.h
@@ -9,8 +9,10 @@
* added or removed on pSeries systems.
*/
-#define PSERIES_RECONFIG_ADD 0x0001
-#define PSERIES_RECONFIG_REMOVE 0x0002
+#define PSERIES_RECONFIG_ADD 0x0001
+#define PSERIES_RECONFIG_REMOVE 0x0002
+#define PSERIES_DRCONF_MEM_ADD 0x0003
+#define PSERIES_DRCONF_MEM_REMOVE 0x0004
#ifdef CONFIG_PPC_PSERIES
extern int pSeries_reconfig_notifier_register(struct notifier_block *);
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index 25af4fc8daf..02fd80710e9 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -126,16 +126,22 @@ extern unsigned int get_slice_psize(struct mm_struct *mm,
extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long len, unsigned int psize);
+
#define slice_mm_new_context(mm) ((mm)->context.id == 0)
#endif /* __ASSEMBLY__ */
#else
#define slice_init()
+#define get_slice_psize(mm, addr) ((mm)->context.user_psize)
#define slice_set_user_psize(mm, psize) \
do { \
(mm)->context.user_psize = (psize); \
(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
} while (0)
+#define slice_set_range_psize(mm, start, len, psize) \
+ slice_set_user_psize((mm), (psize))
#define slice_mm_new_context(mm) 1
#endif /* CONFIG_PPC_MM_SLICES */
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index b95d033ae6e..ae2ea803a0f 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -92,12 +92,15 @@ struct pci_controller {
* anything but the PHB. Only allow talking to the PHB if this is
* set.
* BIG_ENDIAN - cfg_addr is a big endian register
+ * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
+ * the PLB4. Effectively disable MRM commands by setting this.
*/
#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002
#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010
+#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020
u32 indirect_type;
#endif /* !CONFIG_PPC64 */
/* Currently, we limit ourselves to 1 IO range and 3 mem
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
index 818e2abc81e..fd2090dc1dc 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/include/asm-powerpc/pgtable-4k.h
@@ -41,6 +41,7 @@
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* PTE bits */
+#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */
#define _PAGE_F_SECOND _PAGE_SECONDARY
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
index 1cbd6b377ee..c5007712473 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/include/asm-powerpc/pgtable-64k.h
@@ -75,6 +75,20 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */
#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE _PAGE_HPTE_SUB
+
/* Note the full page bits must be in the same location as for normal
* 4k pages as the same asssembly will be used to insert 64K pages
* wether the kernel has CONFIG_PPC_64K_PAGES or not
@@ -83,8 +97,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_HPTE_SUB |\
- _PAGE_COMBO)
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
/* Shift to put page number into pte.
*
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index c08e714d0c4..73015f0139d 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -182,6 +182,9 @@ extern int icache_44x_need_flush;
#define _PMD_SIZE_16M 0x0e0
#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
#elif defined(CONFIG_44x)
/*
* Definitions for PPC440
@@ -253,17 +256,17 @@ extern int icache_44x_need_flush;
*/
#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
+#define _PAGE_RW 0x00000002 /* S: Write permission */
#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
+#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
-#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
+#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
+#define _PAGE_USER 0x00000040 /* S: User page */
+#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
+#define _PAGE_GUARDED 0x00000100 /* H: G bit */
+#define _PAGE_COHERENT 0x00000200 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
/* TODO: Add large page lowmem mapping support */
#define _PMD_PRESENT 0
@@ -273,6 +276,7 @@ extern int icache_44x_need_flush;
/* ERPN in a PTE never gets cleared, ignore it */
#define _PTE_NONE_MASK 0xffffffff00000000ULL
+
#elif defined(CONFIG_FSL_BOOKE)
/*
MMU Assist Register 3:
@@ -315,6 +319,9 @@ extern int icache_44x_need_flush;
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
+/* Until my rework is finished, FSL BookE still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
#elif defined(CONFIG_8xx)
/* Definitions for 8xx embedded chips. */
#define _PAGE_PRESENT 0x0001 /* Page is valid */
@@ -345,6 +352,9 @@ extern int icache_44x_need_flush;
#define _PTE_NONE_MASK _PAGE_ACCESSED
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
#else /* CONFIG_6xx */
/* Definitions for 60x, 740/750, etc. */
#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
@@ -365,6 +375,10 @@ extern int icache_44x_need_flush;
#define _PMD_PRESENT 0
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES 1
+
#endif
/*
@@ -557,9 +571,11 @@ extern void add_hash_page(unsigned context, unsigned long va,
* low PTE word since we expect ALL flag bits to be there
*/
#ifndef CONFIG_PTE_64BIT
-static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+static inline unsigned long pte_update(pte_t *p,
+ unsigned long clr,
unsigned long set)
{
+#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
__asm__ __volatile__("\
@@ -572,16 +588,26 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr,
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+ unsigned long old = pte_val(*p);
+ *p = __pte((old & ~clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
#ifdef CONFIG_44x
if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
icache_44x_need_flush = 1;
#endif
return old;
}
-#else
-static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
- unsigned long set)
+#else /* CONFIG_PTE_64BIT */
+/* TODO: Change that to only modify the low word and move set_pte_at()
+ * out of line
+ */
+static inline unsigned long long pte_update(pte_t *p,
+ unsigned long clr,
+ unsigned long set)
{
+#ifdef PTE_ATOMIC_UPDATES
unsigned long long old;
unsigned long tmp;
@@ -596,13 +622,18 @@ static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+ unsigned long long old = pte_val(*p);
+ *p = __pte((old & ~(unsigned long long)clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
#ifdef CONFIG_44x
if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
icache_44x_need_flush = 1;
#endif
return old;
}
-#endif
+#endif /* CONFIG_PTE_64BIT */
/*
* set_pte stores a linux PTE into the linux page table.
@@ -620,8 +651,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
}
/*
- * 2.6 calles this without flushing the TLB entry, this is wrong
- * for our hash-based implementation, we fix that up here
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
*/
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
@@ -652,6 +683,12 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
{
pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ ptep_set_wrprotect(mm, addr, ptep);
+}
+
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
@@ -665,7 +702,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
({ \
int __changed = !pte_same(*(__ptep), __entry); \
if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
+ __ptep_set_access_flags(__ptep, __entry, __dirty); \
flush_tlb_page_nohash(__vma, __address); \
} \
__changed; \
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index cc6a43ba41d..ab98a9c80b2 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -91,9 +91,11 @@
#define _PAGE_DIRTY 0x0080 /* C: page changed */
#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
#define _PAGE_RW 0x0200 /* software: user write access allowed */
-#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+/* Strong Access Ordering */
+#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
@@ -314,6 +316,16 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & _PAGE_RW) == 0)
+ return;
+ old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
/*
* We currently remove entries from the hashtable regardless of whether
* the entry was young or dirty. The generic routines only flush if the
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
index 2dbd4e7884f..0966899d974 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/include/asm-powerpc/ppc_asm.h
@@ -6,6 +6,7 @@
#include <linux/stringify.h>
#include <asm/asm-compat.h>
+#include <asm/processor.h>
#ifndef __ASSEMBLY__
#error __FILE__ should only be used in assembler files
@@ -73,6 +74,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
REST_10GPRS(22, base)
#endif
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \
+ ((rb) << 11) | (((xs) >> 5)))
+
+#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
+#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
@@ -83,13 +93,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
-#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base)
+#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base)
#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
-#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base)
+#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base)
#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base)
#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base)
@@ -109,6 +119,33 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base)
+#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
+#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base)
+#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
+#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
+#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
+#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
+#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
+#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
+#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
+#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
+#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
+#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
+
#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
#define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
#define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
@@ -356,6 +393,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define toreal(rd)
#define fromreal(rd)
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
#define tophys(rd,rs) \
addis rd,rs,0
@@ -533,6 +576,73 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define vr30 30
#define vr31 31
+/* VSX Registers (VSRs) */
+
+#define vsr0 0
+#define vsr1 1
+#define vsr2 2
+#define vsr3 3
+#define vsr4 4
+#define vsr5 5
+#define vsr6 6
+#define vsr7 7
+#define vsr8 8
+#define vsr9 9
+#define vsr10 10
+#define vsr11 11
+#define vsr12 12
+#define vsr13 13
+#define vsr14 14
+#define vsr15 15
+#define vsr16 16
+#define vsr17 17
+#define vsr18 18
+#define vsr19 19
+#define vsr20 20
+#define vsr21 21
+#define vsr22 22
+#define vsr23 23
+#define vsr24 24
+#define vsr25 25
+#define vsr26 26
+#define vsr27 27
+#define vsr28 28
+#define vsr29 29
+#define vsr30 30
+#define vsr31 31
+#define vsr32 32
+#define vsr33 33
+#define vsr34 34
+#define vsr35 35
+#define vsr36 36
+#define vsr37 37
+#define vsr38 38
+#define vsr39 39
+#define vsr40 40
+#define vsr41 41
+#define vsr42 42
+#define vsr43 43
+#define vsr44 44
+#define vsr45 45
+#define vsr46 46
+#define vsr47 47
+#define vsr48 48
+#define vsr49 49
+#define vsr50 50
+#define vsr51 51
+#define vsr52 52
+#define vsr53 53
+#define vsr54 54
+#define vsr55 55
+#define vsr56 56
+#define vsr57 57
+#define vsr58 58
+#define vsr59 59
+#define vsr60 60
+#define vsr61 61
+#define vsr62 62
+#define vsr63 63
+
/* SPE Registers (EVPRs) */
#define evr0 0
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index cf83f2d7e2a..101ed87f7d8 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -12,6 +12,12 @@
#include <asm/reg.h>
+#ifdef CONFIG_VSX
+#define TS_FPRWIDTH 2
+#else
+#define TS_FPRWIDTH 1
+#endif
+
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <asm/ptrace.h>
@@ -78,9 +84,14 @@ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
/* Lazy FPU handling on uni-processor */
extern struct task_struct *last_task_used_math;
extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_vsx;
extern struct task_struct *last_task_used_spe;
#ifdef CONFIG_PPC32
+
+#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
+#error User TASK_SIZE overlaps with KERNEL_START address
+#endif
#define TASK_SIZE (CONFIG_TASK_SIZE)
/* This decides where the kernel will search for a free chunk of vm
@@ -136,6 +147,10 @@ typedef struct {
unsigned long seg;
} mm_segment_t;
+#define TS_FPROFFSET 0
+#define TS_VSRLOWOFFSET 1
+#define TS_FPR(i) fpr[i][TS_FPROFFSET]
+
struct thread_struct {
unsigned long ksp; /* Kernel stack pointer */
unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */
@@ -152,8 +167,9 @@ struct thread_struct {
unsigned long dbcr0; /* debug control register values */
unsigned long dbcr1;
#endif
- double fpr[32]; /* Complete floating point set */
- struct { /* fpr ... fpscr must be contiguous */
+ /* FP and VSX 0-31 register set */
+ double fpr[32][TS_FPRWIDTH];
+ struct {
unsigned int pad;
unsigned int val; /* Floating point status */
@@ -173,6 +189,10 @@ struct thread_struct {
unsigned long vrsave;
int used_vr; /* set if process has used altivec */
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+ /* VSR status */
+ int used_vsr; /* set if process has used altivec */
+#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
unsigned long evr[32]; /* upper 32-bits of SPE regs */
u64 acc; /* Accumulator */
@@ -202,7 +222,7 @@ struct thread_struct {
.ksp_limit = INIT_SP_LIMIT, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
.fs = KERNEL_DS, \
- .fpr = {0}, \
+ .fpr = {{0}}, \
.fpscr = { .val = 0, }, \
.fpexc_mode = 0, \
}
@@ -214,6 +234,8 @@ struct thread_struct {
#define thread_saved_pc(tsk) \
((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs)
+
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 78b7b0d494c..eb3bd2e1c7f 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -212,8 +212,16 @@ extern u64 of_translate_dma_address(struct device_node *dev,
*/
extern const u32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags);
+#ifdef CONFIG_PCI
extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
u64 *size, unsigned int *flags);
+#else
+static inline const u32 *of_get_pci_address(struct device_node *dev,
+ int bar_no, u64 *size, unsigned int *flags)
+{
+ return NULL;
+}
+#endif /* CONFIG_PCI */
/* Get an address as a resource. Note that if your address is
* a PIO address, the conversion will fail if the physical address
@@ -223,8 +231,16 @@ extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
*/
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
+#ifdef CONFIG_PCI
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
+#else
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_PCI */
/* Parse the ibm,dma-window property of an OF node into the busno, phys and
* size parameters.
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
index 39023dde1cc..3d6e31024e5 100644
--- a/include/asm-powerpc/ptrace.h
+++ b/include/asm-powerpc/ptrace.h
@@ -119,6 +119,7 @@ extern int ptrace_put_reg(struct task_struct *task, int regno,
#ifndef __powerpc64__
#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0)
#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0)
#endif /* ! __powerpc64__ */
#define TRAP(regs) ((regs)->trap & ~0xF)
#ifdef __powerpc64__
@@ -223,6 +224,14 @@ extern void user_disable_single_step(struct task_struct *);
#define PT_VRSAVE_32 (PT_VR0 + 33*4)
#endif
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */
+#endif
#endif /* __powerpc64__ */
/*
@@ -245,6 +254,10 @@ extern void user_disable_single_step(struct task_struct *);
#define PTRACE_GETEVRREGS 20
#define PTRACE_SETEVRREGS 21
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS 27
+#define PTRACE_SETVSRREGS 28
+
/*
* Get or set a debug register. The first 16 are DABR registers and the
* second 16 are IABR registers.
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index c3be6e2e149..edee15d269e 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -16,6 +16,8 @@
#define _ASM_POWERPC_QE_H
#ifdef __KERNEL__
+#include <linux/spinlock.h>
+#include <asm/cpm.h>
#include <asm/immap_qe.h>
#define QE_NUM_OF_SNUM 28
@@ -74,10 +76,38 @@ enum qe_clock {
QE_CLK_DUMMY
};
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+ return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
/* Export QE common operations */
-extern void qe_reset(void);
+extern void __init qe_reset(void);
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+ u8 pad[8];
+#endif
+};
+
extern int par_io_init(struct device_node *np);
extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+ int dir, int open_drain, int assignment,
+ int has_irq);
extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
int assignment, int has_irq);
extern int par_io_data_set(u8 port, u8 pin, u8 val);
@@ -89,20 +119,13 @@ unsigned int qe_get_brg_clk(void);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
-unsigned long qe_muram_alloc(int size, int align);
-int qe_muram_free(unsigned long offset);
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
-void qe_muram_dump(void);
-
-static inline void __iomem *qe_muram_addr(unsigned long offset)
-{
- return (void __iomem *)&qe_immr->muram[offset];
-}
-
-static inline unsigned long qe_muram_offset(void __iomem *addr)
-{
- return addr - (void __iomem *)qe_immr->muram;
-}
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
/* Structure that defines QE firmware binary files.
*
@@ -156,6 +179,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware);
/* Obtain information on the uploaded firmware */
struct qe_firmware_info *qe_get_firmware_info(void);
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
/* Buffer descriptors */
struct qe_bd {
__be16 status;
@@ -166,20 +192,6 @@ struct qe_bd {
#define BD_STATUS_MASK 0xffff0000
#define BD_LENGTH_MASK 0x0000ffff
-#define BD_SC_EMPTY 0x8000 /* Receive is empty */
-#define BD_SC_READY 0x8000 /* Transmit is ready */
-#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */
-#define BD_SC_INTRPT 0x1000 /* Interrupt on change */
-#define BD_SC_LAST 0x0800 /* Last buffer in frame */
-#define BD_SC_CM 0x0200 /* Continous mode */
-#define BD_SC_ID 0x0100 /* Rec'd too many idles */
-#define BD_SC_P 0x0100 /* xmt preamble */
-#define BD_SC_BR 0x0020 /* Break received */
-#define BD_SC_FR 0x0010 /* Framing error */
-#define BD_SC_PR 0x0008 /* Parity error */
-#define BD_SC_OV 0x0002 /* Overrun */
-#define BD_SC_CD 0x0001 /* ?? */
-
/* Alignment */
#define QE_INTR_TABLE_ALIGN 16 /* ??? */
#define QE_ALIGNMENT_OF_BD 8
@@ -254,6 +266,16 @@ enum comm_dir {
#define QE_CMXGCR_MII_ENET_MNG 0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXGCR_USBCS 0x0000000f
+#define QE_CMXGCR_USBCS_CLK3 0x1
+#define QE_CMXGCR_USBCS_CLK5 0x2
+#define QE_CMXGCR_USBCS_CLK7 0x3
+#define QE_CMXGCR_USBCS_CLK9 0x4
+#define QE_CMXGCR_USBCS_CLK13 0x5
+#define QE_CMXGCR_USBCS_CLK17 0x6
+#define QE_CMXGCR_USBCS_CLK19 0x7
+#define QE_CMXGCR_USBCS_CLK21 0x8
+#define QE_CMXGCR_USBCS_BRG9 0x9
+#define QE_CMXGCR_USBCS_BRG10 0xa
/* QE CECR Commands.
*/
@@ -283,7 +305,7 @@ enum comm_dir {
#define QE_HPAC_START_TX 0x0000060b
#define QE_HPAC_START_RX 0x0000070b
#define QE_USB_STOP_TX 0x0000000a
-#define QE_USB_RESTART_TX 0x0000000b
+#define QE_USB_RESTART_TX 0x0000000c
#define QE_QMC_STOP_TX 0x0000000c
#define QE_QMC_STOP_RX 0x0000000d
#define QE_SS7_SU_FIL_RESET 0x0000000e
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index edc0cfd7f6e..bbccadfee0d 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -30,6 +30,7 @@
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
#define MSR_HV_LG 60 /* Hypervisor state */
#define MSR_VEC_LG 25 /* Enable AltiVec */
+#define MSR_VSX_LG 23 /* Enable VSX */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
@@ -71,6 +72,7 @@
#endif
#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
+#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
@@ -240,7 +242,7 @@
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
@@ -732,6 +734,8 @@
" .llong %1\n" \
" .llong 97b-98b\n" \
" .llong 99b-98b\n" \
+ " .llong 0\n" \
+ " .llong 0\n" \
".previous" \
: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
#else
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index cf54a3f3175..be980f4ee49 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -61,6 +61,8 @@
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */
+#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */
#define SPRN_ATB 0x20E /* Alternate Time Base */
#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */
#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */
@@ -78,6 +80,7 @@
#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */
#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */
+#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
@@ -108,6 +111,8 @@
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
+#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */
+#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
#define SPRN_SVR 0x3FF /* System Version Register */
@@ -210,6 +215,7 @@
#ifdef CONFIG_BOOKE
#define DBSR_IC 0x08000000 /* Instruction Completion */
#define DBSR_BT 0x04000000 /* Branch Taken */
+#define DBSR_IRPT 0x02000000 /* Exception Debug Event */
#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
@@ -219,10 +225,14 @@
#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
+#define DBSR_RET 0x00008000 /* Return Debug Event */
+#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
+#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */
#endif
#ifdef CONFIG_40x
#define DBSR_IC 0x80000000 /* Instruction Completion */
#define DBSR_BT 0x40000000 /* Branch taken */
+#define DBSR_IRPT 0x20000000 /* Exception Debug Event */
#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
@@ -253,6 +263,7 @@
#define ESR_BO 0x00020000 /* Byte Ordering */
/* Bit definitions related to the DBCR0. */
+#if defined(CONFIG_40x)
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
@@ -261,20 +272,69 @@
#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
#define DBCR0_RST_NONE 0x00000000 /* No Reset */
#define DBCR0_IC 0x08000000 /* Instruction Completion */
+#define DBCR0_ICMP DBCR0_IC
#define DBCR0_BT 0x04000000 /* Branch Taken */
+#define DBCR0_BRT DBCR0_BT
#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
+#define DBCR0_IRPT DBCR0_EDE
#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
+#define DBCR0_IAC1 DBCR0_IA1
#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
+#define DBCR0_IAC2 DBCR0_IA2
#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
+#define DBCR0_IAC3 DBCR0_IA3
#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
+#define DBCR0_IAC4 DBCR0_IA4
#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+#elif defined(CONFIG_BOOKE)
+#define DBCR0_EDM 0x80000000 /* External Debug Mode */
+#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
+#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
+/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
+#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
+#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
+#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
+#define DBCR0_RST_NONE 0x00000000 /* No Reset */
+#define DBCR0_ICMP 0x08000000 /* Instruction Completion */
+#define DBCR0_IC DBCR0_ICMP
+#define DBCR0_BRT 0x04000000 /* Branch Taken */
+#define DBCR0_BT DBCR0_BRT
+#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */
+#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
+#define DBCR0_TIE DBCR0_TDE
+#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */
+#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */
+#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */
+#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */
+#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */
+#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */
+#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */
+#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */
+#define DBCR0_RET 0x00008000 /* Return Debug Event */
+#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
+#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */
+#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */
+#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */
+#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */
+#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */
+#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */
+
+/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */
+#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */
+#endif
/* Bit definitions related to the TCR. */
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
@@ -336,6 +396,20 @@
#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
+/* Bit definitions for L2CSR0. */
+#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
+#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
+#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
+#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
+#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
+#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
+
/* Bit definitions for SGR. */
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h
index 165d630e1cf..9c1f24fd5d1 100644
--- a/include/asm-powerpc/sigcontext.h
+++ b/include/asm-powerpc/sigcontext.h
@@ -43,9 +43,44 @@ struct sigcontext {
* it must be copied via a vector register to/from storage) or as a word.
* The entry with index 33 contains the vrsave as the first word (offset 0)
* within the quadword.
+ *
+ * Part of the VSX data is stored here also by extending vmx_restore
+ * by an additional 32 double words. Architecturally the layout of
+ * the VSR registers and how they overlap on top of the legacy FPR and
+ * VR registers is shown below:
+ *
+ * VSR doubleword 0 VSR doubleword 1
+ * ----------------------------------------------------------------
+ * VSR[0] | FPR[0] | |
+ * ----------------------------------------------------------------
+ * VSR[1] | FPR[1] | |
+ * ----------------------------------------------------------------
+ * | ... | |
+ * | ... | |
+ * ----------------------------------------------------------------
+ * VSR[30] | FPR[30] | |
+ * ----------------------------------------------------------------
+ * VSR[31] | FPR[31] | |
+ * ----------------------------------------------------------------
+ * VSR[32] | VR[0] |
+ * ----------------------------------------------------------------
+ * VSR[33] | VR[1] |
+ * ----------------------------------------------------------------
+ * | ... |
+ * | ... |
+ * ----------------------------------------------------------------
+ * VSR[62] | VR[30] |
+ * ----------------------------------------------------------------
+ * VSR[63] | VR[31] |
+ * ----------------------------------------------------------------
+ *
+ * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
+ * is stored at the start of vmx_reserve. vmx_reserve is extended for
+ * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
+ * registers and vscr/vrsave.
*/
elf_vrreg_t __user *v_regs;
- long vmx_reserve[ELF_NVRREG+ELF_NVRREG+1];
+ long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
#endif
};
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
index 505f35bacaa..416d4c288ce 100644
--- a/include/asm-powerpc/smp.h
+++ b/include/asm-powerpc/smp.h
@@ -37,6 +37,8 @@ extern void cpu_die(void);
extern void smp_send_debugger_break(int cpu);
extern void smp_message_recv(int);
+DECLARE_PER_CPU(unsigned int, pvr);
+
#ifdef CONFIG_HOTPLUG_CPU
extern void fixup_irqs(cpumask_t map);
int generic_cpu_disable(void);
@@ -67,10 +69,7 @@ DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
* in /proc/interrupts will be wrong!!! --Troy */
#define PPC_MSG_CALL_FUNCTION 0
#define PPC_MSG_RESCHEDULE 1
-/* This is unused now */
-#if 0
-#define PPC_MSG_MIGRATE_TASK 2
-#endif
+#define PPC_MSG_CALL_FUNC_SINGLE 2
#define PPC_MSG_DEBUGGER_BREAK 3
void smp_init_iSeries(void);
@@ -117,6 +116,9 @@ extern void smp_generic_take_timebase(void);
extern struct smp_ops_t *smp_ops;
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
index 9aea8e9f0bd..54a47ea2c3a 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/include/asm-powerpc/sparsemem.h
@@ -13,6 +13,8 @@
#define MAX_PHYSADDR_BITS 44
#define MAX_PHYSMEM_BITS 44
+#endif /* CONFIG_SPARSEMEM */
+
#ifdef CONFIG_MEMORY_HOTPLUG
extern void create_section_mapping(unsigned long start, unsigned long end);
extern int remove_section_mapping(unsigned long start, unsigned long end);
@@ -26,7 +28,5 @@ static inline int hot_add_scn_to_nid(unsigned long scn_addr)
#endif /* CONFIG_NUMA */
#endif /* CONFIG_MEMORY_HOTPLUG */
-#endif /* CONFIG_SPARSEMEM */
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h
index 258c9399319..f56a843f470 100644
--- a/include/asm-powerpc/spinlock.h
+++ b/include/asm-powerpc/spinlock.h
@@ -54,7 +54,7 @@
* This returns the old value in the lock, so we succeeded
* in getting the lock if the return value is 0.
*/
-static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock)
+static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
{
unsigned long tmp, token;
@@ -73,7 +73,7 @@ static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock)
return tmp;
}
-static int __inline__ __raw_spin_trylock(raw_spinlock_t *lock)
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
CLEAR_IO_SYNC;
return __spin_trylock(lock) == 0;
@@ -104,7 +104,7 @@ extern void __rw_yield(raw_rwlock_t *lock);
#define SHARED_PROCESSOR 0
#endif
-static void __inline__ __raw_spin_lock(raw_spinlock_t *lock)
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
{
CLEAR_IO_SYNC;
while (1) {
@@ -119,7 +119,8 @@ static void __inline__ __raw_spin_lock(raw_spinlock_t *lock)
}
}
-static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+static inline
+void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
unsigned long flags_dis;
@@ -139,7 +140,7 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long
}
}
-static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock)
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
SYNC_IO;
__asm__ __volatile__("# __raw_spin_unlock\n\t"
@@ -180,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
* This returns the old value in the lock + 1,
* so we got a read lock if the return value is > 0.
*/
-static long __inline__ __read_trylock(raw_rwlock_t *rw)
+static inline long __read_trylock(raw_rwlock_t *rw)
{
long tmp;
@@ -204,7 +205,7 @@ static long __inline__ __read_trylock(raw_rwlock_t *rw)
* This returns the old value in the lock,
* so we got the write lock if the return value is 0.
*/
-static __inline__ long __write_trylock(raw_rwlock_t *rw)
+static inline long __write_trylock(raw_rwlock_t *rw)
{
long tmp, token;
@@ -224,7 +225,7 @@ static __inline__ long __write_trylock(raw_rwlock_t *rw)
return tmp;
}
-static void __inline__ __raw_read_lock(raw_rwlock_t *rw)
+static inline void __raw_read_lock(raw_rwlock_t *rw)
{
while (1) {
if (likely(__read_trylock(rw) > 0))
@@ -238,7 +239,7 @@ static void __inline__ __raw_read_lock(raw_rwlock_t *rw)
}
}
-static void __inline__ __raw_write_lock(raw_rwlock_t *rw)
+static inline void __raw_write_lock(raw_rwlock_t *rw)
{
while (1) {
if (likely(__write_trylock(rw) == 0))
@@ -252,17 +253,17 @@ static void __inline__ __raw_write_lock(raw_rwlock_t *rw)
}
}
-static int __inline__ __raw_read_trylock(raw_rwlock_t *rw)
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
{
return __read_trylock(rw) > 0;
}
-static int __inline__ __raw_write_trylock(raw_rwlock_t *rw)
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
{
return __write_trylock(rw) == 0;
}
-static void __inline__ __raw_read_unlock(raw_rwlock_t *rw)
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
{
long tmp;
@@ -279,7 +280,7 @@ static void __inline__ __raw_read_unlock(raw_rwlock_t *rw)
: "cr0", "memory");
}
-static __inline__ void __raw_write_unlock(raw_rwlock_t *rw)
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
{
__asm__ __volatile__("# write_unlock\n\t"
LWSYNC_ON_SMP: : :"memory");
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 99348c1f4ca..8b2eb044270 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -191,6 +191,7 @@ struct cbe_spu_info {
struct list_head spus;
int n_spus;
int nr_active;
+ atomic_t busy_spus;
atomic_t reserved_spus;
};
diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h
index 2cda3c38a9f..45963e80f55 100644
--- a/include/asm-powerpc/synch.h
+++ b/include/asm-powerpc/synch.h
@@ -3,34 +3,42 @@
#ifdef __KERNEL__
#include <linux/stringify.h>
+#include <asm/feature-fixups.h>
-#ifdef __powerpc64__
-#define __SUBARCH_HAS_LWSYNC
-#endif
+#ifndef __ASSEMBLY__
+extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
+extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
+ void *fixup_end);
+
+static inline void eieio(void)
+{
+ __asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void isync(void)
+{
+ __asm__ __volatile__ ("isync" : : : "memory");
+}
+#endif /* __ASSEMBLY__ */
-#ifdef __SUBARCH_HAS_LWSYNC
+#if defined(__powerpc64__)
# define LWSYNC lwsync
+#elif defined(CONFIG_E500)
+# define LWSYNC \
+ START_LWSYNC_SECTION(96); \
+ sync; \
+ MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
#else
# define LWSYNC sync
#endif
#ifdef CONFIG_SMP
#define ISYNC_ON_SMP "\n\tisync\n"
-#define LWSYNC_ON_SMP __stringify(LWSYNC) "\n"
+#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n"
#else
#define ISYNC_ON_SMP
#define LWSYNC_ON_SMP
#endif
-static inline void eieio(void)
-{
- __asm__ __volatile__ ("eieio" : : : "memory");
-}
-
-static inline void isync(void)
-{
- __asm__ __volatile__ ("isync" : : : "memory");
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SYNCH_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 5235f875b93..e6e25e2364e 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -30,8 +30,8 @@
*
* For wmb(), we use sync since wmb is used in drivers to order
* stores to system memory with respect to writes to the device.
- * However, smp_wmb() can be a lighter-weight eieio barrier on
- * SMP since it is only used to order updates to system memory.
+ * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
+ * on SMP since it is only used to order updates to system memory.
*/
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
@@ -43,9 +43,16 @@
#ifdef __KERNEL__
#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
#ifdef CONFIG_SMP
+
+#ifdef __SUBARCH_HAS_LWSYNC
+# define SMPWMB lwsync
+#else
+# define SMPWMB eieio
+#endif
+
#define smp_mb() mb()
#define smp_rmb() rmb()
-#define smp_wmb() eieio()
+#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
@@ -132,6 +139,8 @@ extern void enable_kernel_altivec(void);
extern void giveup_altivec(struct task_struct *);
extern void load_up_altivec(struct task_struct *);
extern int emulate_altivec(struct pt_regs *);
+extern void __giveup_vsx(struct task_struct *);
+extern void giveup_vsx(struct task_struct *);
extern void enable_kernel_spe(void);
extern void giveup_spe(struct task_struct *);
extern void load_up_spe(struct task_struct *);
@@ -155,6 +164,14 @@ static inline void flush_altivec_to_thread(struct task_struct *t)
}
#endif
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
#ifdef CONFIG_SPE
extern void flush_spe_to_thread(struct task_struct *);
#else
@@ -190,6 +207,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
+extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
extern unsigned long memory_limit;
extern unsigned long klimit;
@@ -518,54 +536,6 @@ extern void reloc_got2(unsigned long);
#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x)))
-static inline void create_instruction(unsigned long addr, unsigned int instr)
-{
- unsigned int *p;
- p = (unsigned int *)addr;
- *p = instr;
- asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p));
-}
-
-/* Flags for create_branch:
- * "b" == create_branch(addr, target, 0);
- * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE);
- * "bl" == create_branch(addr, target, BRANCH_SET_LINK);
- * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
- */
-#define BRANCH_SET_LINK 0x1
-#define BRANCH_ABSOLUTE 0x2
-
-static inline void create_branch(unsigned long addr,
- unsigned long target, int flags)
-{
- unsigned int instruction;
-
- if (! (flags & BRANCH_ABSOLUTE))
- target = target - addr;
-
- /* Mask out the flags and target, so they don't step on each other. */
- instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC);
-
- create_instruction(addr, instruction);
-}
-
-static inline void create_function_call(unsigned long addr, void * func)
-{
- unsigned long func_addr;
-
-#ifdef CONFIG_PPC64
- /*
- * On PPC64 the function pointer actually points to the function's
- * descriptor. The first entry in the descriptor is the address
- * of the function text.
- */
- func_addr = *(unsigned long *)func;
-#else
- func_addr = (unsigned long)func;
-#endif
- create_branch(addr, func_addr, BRANCH_SET_LINK);
-}
-
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
extern void account_system_vtime(struct task_struct *);
#endif
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index d030f5ce39a..b705c2a7651 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -116,7 +116,6 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */
#define TIF_NOERROR 12 /* Force successful syscall return */
-#define TIF_RESTORE_SIGMASK 13 /* Restore signal mask in do_signal */
#define TIF_FREEZE 14 /* Freezing for suspend */
#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */
#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */
@@ -134,21 +133,33 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
#define _TIF_NOERROR (1<<TIF_NOERROR)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
-#define _TIF_USER_WORK_MASK ( _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
+#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR)
/* Bits in local_flags */
/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
#define TLF_NAPPING 0 /* idle thread enabled NAP mode */
+#define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */
#define _TLF_NAPPING (1 << TLF_NAPPING)
+#define _TLF_SLEEPING (1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->local_flags |= _TLF_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index ce5de6e0e69..febd581ec9b 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -33,6 +33,7 @@ extern unsigned tb_to_us;
struct rtc_time;
extern void to_tm(int tim, struct rtc_time * tm);
+extern void GregorianDay(struct rtc_time *tm);
extern time_t last_rtc_update;
extern void generic_calibrate_decr(void);
diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h
index 92dedde761d..c55e14f7ef4 100644
--- a/include/asm-powerpc/timex.h
+++ b/include/asm-powerpc/timex.h
@@ -38,6 +38,8 @@ static inline cycles_t get_cycles(void)
" .long 0\n"
" .long 97b-98b\n"
" .long 99b-98b\n"
+ " .long 0\n"
+ " .long 0\n"
".previous"
: "=r" (ret) : "i" (CPU_FTR_601));
return ret;
diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h
index 88320a05f0a..5eb8e599e5c 100644
--- a/include/asm-powerpc/xmon.h
+++ b/include/asm-powerpc/xmon.h
@@ -12,13 +12,22 @@
#ifdef __KERNEL__
+#include <linux/irqreturn.h>
+
#ifdef CONFIG_XMON
extern void xmon_setup(void);
extern void xmon_register_spus(struct list_head *list);
+struct pt_regs;
+extern int xmon(struct pt_regs *excp);
+extern irqreturn_t xmon_irq(int, void *);
#else
static inline void xmon_setup(void) { };
static inline void xmon_register_spus(struct list_head *list) { };
#endif
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+extern int cpus_are_in_xmon(void);
+#endif
+
#endif /* __KERNEL __ */
#endif /* __ASM_POWERPC_XMON_H */
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
deleted file mode 100644
index 4b0e1520600..00000000000
--- a/include/asm-ppc/8xx_immap.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * MPC8xx Internal Memory Map
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * The I/O on the MPC860 is comprised of blocks of special registers
- * and the dual port ram for the Communication Processor Module.
- * Within this space are functional units such as the SIU, memory
- * controller, system timers, and other control functions. It is
- * a combination that I found difficult to separate into logical
- * functional files.....but anyone else is welcome to try. -- Dan
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_8XX__
-#define __IMMAP_8XX__
-
-/* System configuration registers.
-*/
-typedef struct sys_conf {
- uint sc_siumcr;
- uint sc_sypcr;
- uint sc_swt;
- char res1[2];
- ushort sc_swsr;
- uint sc_sipend;
- uint sc_simask;
- uint sc_siel;
- uint sc_sivec;
- uint sc_tesr;
- char res2[0xc];
- uint sc_sdcr;
- char res3[0x4c];
-} sysconf8xx_t;
-
-/* PCMCIA configuration registers.
-*/
-typedef struct pcmcia_conf {
- uint pcmc_pbr0;
- uint pcmc_por0;
- uint pcmc_pbr1;
- uint pcmc_por1;
- uint pcmc_pbr2;
- uint pcmc_por2;
- uint pcmc_pbr3;
- uint pcmc_por3;
- uint pcmc_pbr4;
- uint pcmc_por4;
- uint pcmc_pbr5;
- uint pcmc_por5;
- uint pcmc_pbr6;
- uint pcmc_por6;
- uint pcmc_pbr7;
- uint pcmc_por7;
- char res1[0x20];
- uint pcmc_pgcra;
- uint pcmc_pgcrb;
- uint pcmc_pscr;
- char res2[4];
- uint pcmc_pipr;
- char res3[4];
- uint pcmc_per;
- char res4[4];
-} pcmconf8xx_t;
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- uint memc_br0;
- uint memc_or0;
- uint memc_br1;
- uint memc_or1;
- uint memc_br2;
- uint memc_or2;
- uint memc_br3;
- uint memc_or3;
- uint memc_br4;
- uint memc_or4;
- uint memc_br5;
- uint memc_or5;
- uint memc_br6;
- uint memc_or6;
- uint memc_br7;
- uint memc_or7;
- char res1[0x24];
- uint memc_mar;
- uint memc_mcr;
- char res2[4];
- uint memc_mamr;
- uint memc_mbmr;
- ushort memc_mstat;
- ushort memc_mptpr;
- uint memc_mdr;
- char res3[0x80];
-} memctl8xx_t;
-
-/*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register 16-9
- */
-#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
-#define BR_AT_MSK 0x00007000 /* Address Type Mask */
-#define BR_PS_MSK 0x00000c00 /* Port Size Mask */
-#define BR_PS_32 0x00000000 /* 32 bit port size */
-#define BR_PS_16 0x00000800 /* 16 bit port size */
-#define BR_PS_8 0x00000400 /* 8 bit port size */
-#define BR_PARE 0x00000200 /* Parity Enable */
-#define BR_WP 0x00000100 /* Write Protect */
-#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */
-#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
-#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
-#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */
-#define BR_V 0x00000001 /* Bank Valid */
-
-/*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register 16-11
- */
-#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
-#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */
-#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */
- /* Address Multiplex */
-#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */
-#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */
-#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */
-#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */
-#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
-#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
-#define OR_BI 0x00000100 /* Burst inhibit */
-#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
-#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
-#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
-#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
-#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */
-#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */
-#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */
-#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */
-#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */
-#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */
-#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */
-#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
-#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */
-#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */
-#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */
-#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */
-#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
-#define OR_SETA 0x00000008 /* External Transfer Acknowledge */
-#define OR_TRLX 0x00000004 /* Timing Relaxed */
-#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- ushort sit_tbscr;
- char res0[0x02];
- uint sit_tbreff0;
- uint sit_tbreff1;
- char res1[0x14];
- ushort sit_rtcsc;
- char res2[0x02];
- uint sit_rtc;
- uint sit_rtsec;
- uint sit_rtcal;
- char res3[0x10];
- ushort sit_piscr;
- char res4[2];
- uint sit_pitc;
- uint sit_pitr;
- char res5[0x34];
-} sit8xx_t;
-
-#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
-#define TBSCR_REFA ((ushort)0x0080)
-#define TBSCR_REFB ((ushort)0x0040)
-#define TBSCR_REFAE ((ushort)0x0008)
-#define TBSCR_REFBE ((ushort)0x0004)
-#define TBSCR_TBF ((ushort)0x0002)
-#define TBSCR_TBE ((ushort)0x0001)
-
-#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
-#define RTCSC_SEC ((ushort)0x0080)
-#define RTCSC_ALR ((ushort)0x0040)
-#define RTCSC_38K ((ushort)0x0010)
-#define RTCSC_SIE ((ushort)0x0008)
-#define RTCSC_ALE ((ushort)0x0004)
-#define RTCSC_RTF ((ushort)0x0002)
-#define RTCSC_RTE ((ushort)0x0001)
-
-#define PISCR_PIRQ_MASK ((ushort)0xff00)
-#define PISCR_PS ((ushort)0x0080)
-#define PISCR_PIE ((ushort)0x0004)
-#define PISCR_PTF ((ushort)0x0002)
-#define PISCR_PTE ((ushort)0x0001)
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- uint car_sccr;
- uint car_plprcr;
- uint car_rsr;
- char res[0x74]; /* Reserved area */
-} car8xx_t;
-
-/* System Integration Timers keys.
-*/
-typedef struct sitk {
- uint sitk_tbscrk;
- uint sitk_tbreff0k;
- uint sitk_tbreff1k;
- uint sitk_tbk;
- char res1[0x10];
- uint sitk_rtcsck;
- uint sitk_rtck;
- uint sitk_rtseck;
- uint sitk_rtcalk;
- char res2[0x10];
- uint sitk_piscrk;
- uint sitk_pitck;
- char res3[0x38];
-} sitk8xx_t;
-
-/* Clocks and reset keys.
-*/
-typedef struct cark {
- uint cark_sccrk;
- uint cark_plprcrk;
- uint cark_rsrk;
- char res[0x474];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY ((unsigned int)0x55ccaa33)
-
-/* Video interface. MPC823 Only.
-*/
-typedef struct vid823 {
- ushort vid_vccr;
- ushort res1;
- u_char vid_vsr;
- u_char res2;
- u_char vid_vcmr;
- u_char res3;
- uint vid_vbcb;
- uint res4;
- uint vid_vfcr0;
- uint vid_vfaa0;
- uint vid_vfba0;
- uint vid_vfcr1;
- uint vid_vfaa1;
- uint vid_vfba1;
- u_char res5[0x18];
-} vid823_t;
-
-/* LCD interface. 823 Only.
-*/
-typedef struct lcd {
- uint lcd_lccr;
- uint lcd_lchcr;
- uint lcd_lcvcr;
- char res1[4];
- uint lcd_lcfaa;
- uint lcd_lcfba;
- char lcd_lcsr;
- char res2[0x7];
-} lcd823_t;
-
-/* I2C
-*/
-typedef struct i2c {
- u_char i2c_i2mod;
- char res1[3];
- u_char i2c_i2add;
- char res2[3];
- u_char i2c_i2brg;
- char res3[3];
- u_char i2c_i2com;
- char res4[3];
- u_char i2c_i2cer;
- char res5[3];
- u_char i2c_i2cmr;
- char res6[0x8b];
-} i2c8xx_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- char res1[4];
- uint sdma_sdar;
- u_char sdma_sdsr;
- char res3[3];
- u_char sdma_sdmr;
- char res4[3];
- u_char sdma_idsr1;
- char res5[3];
- u_char sdma_idmr1;
- char res6[3];
- u_char sdma_idsr2;
- char res7[3];
- u_char sdma_idmr2;
- char res8[0x13];
-} sdma8xx_t;
-
-/* Communication Processor Module Interrupt Controller.
-*/
-typedef struct cpm_ic {
- ushort cpic_civr;
- char res[0xe];
- uint cpic_cicr;
- uint cpic_cipr;
- uint cpic_cimr;
- uint cpic_cisr;
-} cpic8xx_t;
-
-/* Input/Output Port control/status registers.
-*/
-typedef struct io_port {
- ushort iop_padir;
- ushort iop_papar;
- ushort iop_paodr;
- ushort iop_padat;
- char res1[8];
- ushort iop_pcdir;
- ushort iop_pcpar;
- ushort iop_pcso;
- ushort iop_pcdat;
- ushort iop_pcint;
- char res2[6];
- ushort iop_pddir;
- ushort iop_pdpar;
- char res3[2];
- ushort iop_pddat;
- uint utmode;
- char res4[4];
-} iop8xx_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- ushort cpmt_tgcr;
- char res1[0xe];
- ushort cpmt_tmr1;
- ushort cpmt_tmr2;
- ushort cpmt_trr1;
- ushort cpmt_trr2;
- ushort cpmt_tcr1;
- ushort cpmt_tcr2;
- ushort cpmt_tcn1;
- ushort cpmt_tcn2;
- ushort cpmt_tmr3;
- ushort cpmt_tmr4;
- ushort cpmt_trr3;
- ushort cpmt_trr4;
- ushort cpmt_tcr3;
- ushort cpmt_tcr4;
- ushort cpmt_tcn3;
- ushort cpmt_tcn4;
- ushort cpmt_ter1;
- ushort cpmt_ter2;
- ushort cpmt_ter3;
- ushort cpmt_ter4;
- char res2[8];
-} cpmtimer8xx_t;
-
-/* Finally, the Communication Processor stuff.....
-*/
-typedef struct scc { /* Serial communication channels */
- uint scc_gsmrl;
- uint scc_gsmrh;
- ushort scc_psmr;
- char res1[2];
- ushort scc_todr;
- ushort scc_dsr;
- ushort scc_scce;
- char res2[2];
- ushort scc_sccm;
- char res3;
- u_char scc_sccs;
- char res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- char res1[2];
- ushort smc_smcmr;
- char res2[2];
- u_char smc_smce;
- char res3[3];
- u_char smc_smcm;
- char res4[5];
-} smc_t;
-
-/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
- * it fits within the address space.
- */
-
-typedef struct fec {
- uint fec_addr_low; /* lower 32 bits of station address */
- ushort fec_addr_high; /* upper 16 bits of station address */
- ushort res1; /* reserved */
- uint fec_hash_table_high; /* upper 32-bits of hash table */
- uint fec_hash_table_low; /* lower 32-bits of hash table */
- uint fec_r_des_start; /* beginning of Rx descriptor ring */
- uint fec_x_des_start; /* beginning of Tx descriptor ring */
- uint fec_r_buff_size; /* Rx buffer size */
- uint res2[9]; /* reserved */
- uint fec_ecntrl; /* ethernet control register */
- uint fec_ievent; /* interrupt event register */
- uint fec_imask; /* interrupt mask register */
- uint fec_ivec; /* interrupt level and vector status */
- uint fec_r_des_active; /* Rx ring updated flag */
- uint fec_x_des_active; /* Tx ring updated flag */
- uint res3[10]; /* reserved */
- uint fec_mii_data; /* MII data register */
- uint fec_mii_speed; /* MII speed control register */
- uint res4[17]; /* reserved */
- uint fec_r_bound; /* end of RAM (read-only) */
- uint fec_r_fstart; /* Rx FIFO start address */
- uint res5[6]; /* reserved */
- uint fec_x_fstart; /* Tx FIFO start address */
- uint res6[17]; /* reserved */
- uint fec_fun_code; /* fec SDMA function code */
- uint res7[3]; /* reserved */
- uint fec_r_cntrl; /* Rx control register */
- uint fec_r_hash; /* Rx hash register */
- uint res8[14]; /* reserved */
- uint fec_x_cntrl; /* Tx control register */
- uint res9[0x1e]; /* reserved */
-} fec_t;
-
-/* The FEC and LCD color map share the same address space....
- * I guess we will never see an 823T :-).
- */
-union fec_lcd {
- fec_t fl_un_fec;
- u_char fl_un_cmap[0x200];
-};
-
-typedef struct comm_proc {
- /* General control and status registers.
- */
- ushort cp_cpcr;
- u_char res1[2];
- ushort cp_rccr;
- u_char res2;
- u_char cp_rmds;
- u_char res3[4];
- ushort cp_cpmcr1;
- ushort cp_cpmcr2;
- ushort cp_cpmcr3;
- ushort cp_cpmcr4;
- u_char res4[2];
- ushort cp_rter;
- u_char res5[2];
- ushort cp_rtmr;
- u_char res6[0x14];
-
- /* Baud rate generators.
- */
- uint cp_brgc1;
- uint cp_brgc2;
- uint cp_brgc3;
- uint cp_brgc4;
-
- /* Serial Communication Channels.
- */
- scc_t cp_scc[4];
-
- /* Serial Management Channels.
- */
- smc_t cp_smc[2];
-
- /* Serial Peripheral Interface.
- */
- ushort cp_spmode;
- u_char res7[4];
- u_char cp_spie;
- u_char res8[3];
- u_char cp_spim;
- u_char res9[2];
- u_char cp_spcom;
- u_char res10[2];
-
- /* Parallel Interface Port.
- */
- u_char res11[2];
- ushort cp_pipc;
- u_char res12[2];
- ushort cp_ptpr;
- uint cp_pbdir;
- uint cp_pbpar;
- u_char res13[2];
- ushort cp_pbodr;
- uint cp_pbdat;
-
- /* Port E - MPC87x/88x only.
- */
- uint cp_pedir;
- uint cp_pepar;
- uint cp_peso;
- uint cp_peodr;
- uint cp_pedat;
-
- /* Communications Processor Timing Register -
- Contains RMII Timing for the FECs on MPC87x/88x only.
- */
- uint cp_cptr;
-
- /* Serial Interface and Time Slot Assignment.
- */
- uint cp_simode;
- u_char cp_sigmr;
- u_char res15;
- u_char cp_sistr;
- u_char cp_sicmr;
- u_char res16[4];
- uint cp_sicr;
- uint cp_sirp;
- u_char res17[0xc];
-
- /* 256 bytes of MPC823 video controller RAM array.
- */
- u_char cp_vcram[0x100];
- u_char cp_siram[0x200];
-
- /* The fast ethernet controller is not really part of the CPM,
- * but it resides in the address space.
- * The LCD color map is also here.
- */
- union fec_lcd fl_un;
-#define cp_fec fl_un.fl_un_fec
-#define lcd_cmap fl_un.fl_un_cmap
- char res18[0xE00];
-
- /* The DUET family has a second FEC here */
- fec_t cp_fec2;
-#define cp_fec1 cp_fec /* consistency macro */
-
- /* Dual Ported RAM follows.
- * There are many different formats for this memory area
- * depending upon the devices used and options chosen.
- * Some processors don't have all of it populated.
- */
- u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
- u_char cp_dparam[0x400]; /* Parameter RAM */
-} cpm8xx_t;
-
-/* Internal memory map.
-*/
-typedef struct immap {
- sysconf8xx_t im_siu_conf; /* SIU Configuration */
- pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
- memctl8xx_t im_memctl; /* Memory Controller */
- sit8xx_t im_sit; /* System integration timers */
- car8xx_t im_clkrst; /* Clocks and reset */
- sitk8xx_t im_sitk; /* Sys int timer keys */
- cark8xx_t im_clkrstk; /* Clocks and reset keys */
- vid823_t im_vid; /* Video (823 only) */
- lcd823_t im_lcd; /* LCD (823 only) */
- i2c8xx_t im_i2c; /* I2C control/status */
- sdma8xx_t im_sdma; /* SDMA control/status */
- cpic8xx_t im_cpic; /* CPM Interrupt Controller */
- iop8xx_t im_ioport; /* IO Port control/status */
- cpmtimer8xx_t im_cpmtimer; /* CPM timers */
- cpm8xx_t im_cpm; /* Communication processor */
-} immap_t;
-
-#endif /* __IMMAP_8XX__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigayle.h b/include/asm-ppc/amigayle.h
deleted file mode 100644
index 1fe0b87859b..00000000000
--- a/include/asm-ppc/amigayle.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/amigayle.h>
diff --git a/include/asm-ppc/amipcmcia.h b/include/asm-ppc/amipcmcia.h
deleted file mode 100644
index 3f65f63f508..00000000000
--- a/include/asm-ppc/amipcmcia.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/amipcmcia.h>
diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h
deleted file mode 100644
index f6ed77aee32..00000000000
--- a/include/asm-ppc/bootinfo.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Non-machine dependent bootinfo structure. Basic idea
- * borrowed from the m68k.
- *
- * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org>
- */
-
-#ifdef __KERNEL__
-#ifndef _PPC_BOOTINFO_H
-#define _PPC_BOOTINFO_H
-
-#include <asm/page.h>
-
-struct bi_record {
- unsigned long tag; /* tag ID */
- unsigned long size; /* size of record (in bytes) */
- unsigned long data[0]; /* data */
-};
-
-#define BI_FIRST 0x1010 /* first record - marker */
-#define BI_LAST 0x1011 /* last record - marker */
-#define BI_CMD_LINE 0x1012
-#define BI_BOOTLOADER_ID 0x1013
-#define BI_INITRD 0x1014
-#define BI_SYSMAP 0x1015
-#define BI_MACHTYPE 0x1016
-#define BI_MEMSIZE 0x1017
-#define BI_BOARD_INFO 0x1018
-
-extern struct bi_record *find_bootinfo(void);
-extern void bootinfo_init(struct bi_record *rec);
-extern void bootinfo_append(unsigned long tag, unsigned long size, void * data);
-extern void parse_bootinfo(struct bi_record *rec);
-extern unsigned long boot_mem_size;
-
-static inline struct bi_record *
-bootinfo_addr(unsigned long offset)
-{
-
- return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
- (1 << 20));
-}
-
-
-#endif /* _PPC_BOOTINFO_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootx.h b/include/asm-ppc/bootx.h
deleted file mode 100644
index b0c51b45d7a..00000000000
--- a/include/asm-ppc/bootx.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file describes the structure passed from the BootX application
- * (for MacOS) when it is used to boot Linux.
- *
- * Written by Benjamin Herrenschmidt.
- */
-
-
-#ifndef __ASM_BOOTX_H__
-#define __ASM_BOOTX_H__
-
-#ifdef macintosh
-#include <Types.h>
-#include "linux_type_defs.h"
-#endif
-
-#ifdef macintosh
-/* All this requires PowerPC alignment */
-#pragma options align=power
-#endif
-
-/* On kernel entry:
- *
- * r3 = 0x426f6f58 ('BooX')
- * r4 = pointer to boot_infos
- * r5 = NULL
- *
- * Data and instruction translation disabled, interrupts
- * disabled, kernel loaded at physical 0x00000000 on PCI
- * machines (will be different on NuBus).
- */
-
-#define BOOT_INFO_VERSION 5
-#define BOOT_INFO_COMPATIBLE_VERSION 1
-
-/* Bit in the architecture flag mask. More to be defined in
- future versions. Note that either BOOT_ARCH_PCI or
- BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
- set additionally when BOOT_ARCH_NUBUS is set.
- */
-#define BOOT_ARCH_PCI 0x00000001UL
-#define BOOT_ARCH_NUBUS 0x00000002UL
-#define BOOT_ARCH_NUBUS_PDM 0x00000010UL
-#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL
-#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL
-
-/* Maximum number of ranges in phys memory map */
-#define MAX_MEM_MAP_SIZE 26
-
-/* This is the format of an element in the physical memory map. Note that
- the map is optional and current BootX will only build it for pre-PCI
- machines */
-typedef struct boot_info_map_entry
-{
- __u32 physAddr; /* Physical starting address */
- __u32 size; /* Size in bytes */
-} boot_info_map_entry_t;
-
-
-/* Here are the boot informations that are passed to the bootstrap
- * Note that the kernel arguments and the device tree are appended
- * at the end of this structure. */
-typedef struct boot_infos
-{
- /* Version of this structure */
- __u32 version;
- /* backward compatible down to version: */
- __u32 compatible_version;
-
- /* NEW (vers. 2) this holds the current _logical_ base addr of
- the frame buffer (for use by early boot message) */
- __u8* logicalDisplayBase;
-
- /* NEW (vers. 4) Apple's machine identification */
- __u32 machineID;
-
- /* NEW (vers. 4) Detected hw architecture */
- __u32 architecture;
-
- /* The device tree (internal addresses relative to the beginning of the tree,
- * device tree offset relative to the beginning of this structure).
- * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
- * field is 0.
- */
- __u32 deviceTreeOffset; /* Device tree offset */
- __u32 deviceTreeSize; /* Size of the device tree */
-
- /* Some infos about the current MacOS display */
- __u32 dispDeviceRect[4]; /* left,top,right,bottom */
- __u32 dispDeviceDepth; /* (8, 16 or 32) */
- __u8* dispDeviceBase; /* base address (physical) */
- __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */
- __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */
- /* Optional offset in the registry to the current
- * MacOS display. (Can be 0 when not detected) */
- __u32 dispDeviceRegEntryOffset;
-
- /* Optional pointer to boot ramdisk (offset from this structure) */
- __u32 ramDisk;
- __u32 ramDiskSize; /* size of ramdisk image */
-
- /* Kernel command line arguments (offset from this structure) */
- __u32 kernelParamsOffset;
-
- /* ALL BELOW NEW (vers. 4) */
-
- /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
- (non-PCI) only. On PCI, memory is contiguous and it's size is in the
- device-tree. */
- boot_info_map_entry_t
- physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
- __u32 physMemoryMapSize; /* How many entries in map */
-
-
- /* The framebuffer size (optional, currently 0) */
- __u32 frameBufferSize; /* Represents a max size, can be 0. */
-
- /* NEW (vers. 5) */
-
- /* Total params size (args + colormap + device tree + ramdisk) */
- __u32 totalParamsSize;
-
-} boot_infos_t;
-
-/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index is represented
- * by 3 short words containing a 16 bits (unsigned) color component.
- * Later versions may contain the gamma table for direct-color devices here.
- */
-#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL)
-
-#ifdef macintosh
-#pragma options align=reset
-#endif
-
-#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
deleted file mode 100644
index ed3630251b3..00000000000
--- a/include/asm-ppc/btext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Definitions for using the procedures in btext.c.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#ifndef __PPC_BTEXT_H
-#define __PPC_BTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/bootx.h>
-
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-
-extern unsigned long disp_BAT[2];
-
-extern boot_infos_t disp_bi;
-extern int boot_text_mapped;
-
-extern void btext_init(boot_infos_t *bi);
-extern void btext_welcome(void);
-extern void btext_prepare_BAT(void);
-extern void btext_setup_display(int width, int height, int depth, int pitch,
- unsigned long address);
-extern void map_boot_text(void);
-extern void btext_update_display(unsigned long phys, int width, int height,
- int depth, int pitch);
-
-extern void btext_drawchar(char c);
-extern void btext_drawstring(const char *str);
-extern void btext_drawhex(unsigned long v);
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc/cpm1.h b/include/asm-ppc/cpm1.h
deleted file mode 100644
index 03035acd85c..00000000000
--- a/include/asm-ppc/cpm1.h
+++ /dev/null
@@ -1,688 +0,0 @@
-/*
- * MPC8xx Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * throught the MPC8xx internal memory map. See immap.h for details.
- * This file only contains what I need for the moment, not the total
- * CPM capabilities. I (or someone else) will add definitions as they
- * are needed. -- Dan
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space. The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM1__
-#define __CPM1__
-
-#include <asm/8xx_immap.h>
-#include <asm/ptrace.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* Some commands (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR
-
-/* Channel numbers.
-*/
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
-#define CPM_CR_CH_TIMER CPM_CR_CH_SPI
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)0x0800)
-#define CPM_DATAONLY_SIZE ((uint)0x0700)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8xx_t *cpmp; /* Pointer to comm processor */
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8 *addr);
-extern void cpm_setbrg(uint brg, uint rate);
-
-extern void cpm_load_patch(volatile immap_t *immr);
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-#define BD_SC_CL ((ushort)0x0001) /* Collision */
-
-/* Parameter RAM offsets.
-*/
-#define PROFF_SCC1 ((uint)0x0000)
-#define PROFF_IIC ((uint)0x0080)
-#define PROFF_SCC2 ((uint)0x0100)
-#define PROFF_SPI ((uint)0x0180)
-#define PROFF_SCC3 ((uint)0x0200)
-#define PROFF_SMC1 ((uint)0x0280)
-#define PROFF_SCC4 ((uint)0x0300)
-#define PROFF_SMC2 ((uint)0x0380)
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- char res1[8]; /* Reserved */
- ushort smc_rpbase; /* Relocation pointer */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SI Clock Route Register
-*/
-#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
-#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
-#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
-#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
-#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
-#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* Function code bits.
-*/
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* CPM Ethernet through SCCx.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- char res1[8]; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
- char res1[4]; /* Reserved */
- ushort iic_rpbase; /* Relocation pointer */
- char res2[2]; /* Reserved */
-} iic_t;
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res;
- ushort spi_rpbase; /* Relocation pointer */
- ushort spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
-#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
-#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME 0x20
-#define SPIE_TXE 0x10
-#define SPIE_BSY 0x04
-#define SPIE_TXB 0x02
-#define SPIE_RXB 0x01
-
-/*
- * RISC Controller Configuration Register definitons
- */
-#define RCCR_TIME 0x8000 /* RISC Timer Enable */
-#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
-#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
-
-/* RISC Timer Parameter RAM offset */
-#define PROFF_RTMR ((uint)0x01B0)
-
-typedef struct risc_timer_pram {
- unsigned short tm_base; /* RISC Timer Table Base Address */
- unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */
- unsigned short r_tmr; /* RISC Timer Mode Register */
- unsigned short r_tmv; /* RISC Timer Valid Register */
- unsigned long tm_cmd; /* RISC Timer Command Register */
- unsigned long tm_cnt; /* RISC Timer Internal Count */
-} rt_pram_t;
-
-/* Bits in RISC Timer Command Register */
-#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
-#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
-#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
-#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
-#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-#define CPMVEC_NR 32
-#define CPMVEC_PIO_PC15 ((ushort)0x1f)
-#define CPMVEC_SCC1 ((ushort)0x1e)
-#define CPMVEC_SCC2 ((ushort)0x1d)
-#define CPMVEC_SCC3 ((ushort)0x1c)
-#define CPMVEC_SCC4 ((ushort)0x1b)
-#define CPMVEC_PIO_PC14 ((ushort)0x1a)
-#define CPMVEC_TIMER1 ((ushort)0x19)
-#define CPMVEC_PIO_PC13 ((ushort)0x18)
-#define CPMVEC_PIO_PC12 ((ushort)0x17)
-#define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
-#define CPMVEC_IDMA1 ((ushort)0x15)
-#define CPMVEC_IDMA2 ((ushort)0x14)
-#define CPMVEC_TIMER2 ((ushort)0x12)
-#define CPMVEC_RISCTIMER ((ushort)0x11)
-#define CPMVEC_I2C ((ushort)0x10)
-#define CPMVEC_PIO_PC11 ((ushort)0x0f)
-#define CPMVEC_PIO_PC10 ((ushort)0x0e)
-#define CPMVEC_TIMER3 ((ushort)0x0c)
-#define CPMVEC_PIO_PC9 ((ushort)0x0b)
-#define CPMVEC_PIO_PC8 ((ushort)0x0a)
-#define CPMVEC_PIO_PC7 ((ushort)0x09)
-#define CPMVEC_TIMER4 ((ushort)0x07)
-#define CPMVEC_PIO_PC6 ((ushort)0x06)
-#define CPMVEC_SPI ((ushort)0x05)
-#define CPMVEC_SMC1 ((ushort)0x04)
-#define CPMVEC_SMC2 ((ushort)0x03)
-#define CPMVEC_PIO_PC5 ((ushort)0x02)
-#define CPMVEC_PIO_PC4 ((ushort)0x01)
-#define CPMVEC_ERROR ((ushort)0x00)
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-extern void cpm_free_handler(int vec);
-
-#endif /* __CPM1__ */
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
deleted file mode 100644
index 4c538228e42..00000000000
--- a/include/asm-ppc/cpm2.h
+++ /dev/null
@@ -1,1248 +0,0 @@
-/*
- * Communication Processor Module v2.
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the CPM2 internal
- * memory map. See immap_cpm2.h for details.
- */
-#ifdef __KERNEL__
-#ifndef __CPM2__
-#define __CPM2__
-
-#include <asm/immap_cpm2.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((uint)0x80000000)
-#define CPM_CR_PAGE ((uint)0x7c000000)
-#define CPM_CR_SBLOCK ((uint)0x03e00000)
-#define CPM_CR_FLG ((uint)0x00010000)
-#define CPM_CR_MCN ((uint)0x00003fc0)
-#define CPM_CR_OPCODE ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK (0x04)
-#define CPM_CR_SCC2_SBLOCK (0x05)
-#define CPM_CR_SCC3_SBLOCK (0x06)
-#define CPM_CR_SCC4_SBLOCK (0x07)
-#define CPM_CR_SMC1_SBLOCK (0x08)
-#define CPM_CR_SMC2_SBLOCK (0x09)
-#define CPM_CR_SPI_SBLOCK (0x0a)
-#define CPM_CR_I2C_SBLOCK (0x0b)
-#define CPM_CR_TIMER_SBLOCK (0x0f)
-#define CPM_CR_RAND_SBLOCK (0x0e)
-#define CPM_CR_FCC1_SBLOCK (0x10)
-#define CPM_CR_FCC2_SBLOCK (0x11)
-#define CPM_CR_FCC3_SBLOCK (0x12)
-#define CPM_CR_IDMA1_SBLOCK (0x14)
-#define CPM_CR_IDMA2_SBLOCK (0x15)
-#define CPM_CR_IDMA3_SBLOCK (0x16)
-#define CPM_CR_IDMA4_SBLOCK (0x17)
-#define CPM_CR_MCC1_SBLOCK (0x1c)
-
-#define CPM_CR_FCC_SBLOCK(x) (x + 0x10)
-
-#define CPM_CR_SCC1_PAGE (0x00)
-#define CPM_CR_SCC2_PAGE (0x01)
-#define CPM_CR_SCC3_PAGE (0x02)
-#define CPM_CR_SCC4_PAGE (0x03)
-#define CPM_CR_SMC1_PAGE (0x07)
-#define CPM_CR_SMC2_PAGE (0x08)
-#define CPM_CR_SPI_PAGE (0x09)
-#define CPM_CR_I2C_PAGE (0x0a)
-#define CPM_CR_TIMER_PAGE (0x0a)
-#define CPM_CR_RAND_PAGE (0x0a)
-#define CPM_CR_FCC1_PAGE (0x04)
-#define CPM_CR_FCC2_PAGE (0x05)
-#define CPM_CR_FCC3_PAGE (0x06)
-#define CPM_CR_IDMA1_PAGE (0x07)
-#define CPM_CR_IDMA2_PAGE (0x08)
-#define CPM_CR_IDMA3_PAGE (0x09)
-#define CPM_CR_IDMA4_PAGE (0x0a)
-#define CPM_CR_MCC1_PAGE (0x07)
-#define CPM_CR_MCC2_PAGE (0x08)
-
-#define CPM_CR_FCC_PAGE(x) (x + 0x04)
-
-/* Some opcodes (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_START_IDMA ((ushort)0x0009)
-#define CPM_CR_STOP_IDMA ((ushort)0x000b)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
- ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-#if defined(CONFIG_8272)
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
-#else
-#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
-#endif
-
-/* The number of pages of host memory we allocate for CPM. This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES 2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */
-
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
-extern void cpm2_reset(void);
-
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define PROFF_SCC1 ((uint)0x8000)
-#define PROFF_SCC2 ((uint)0x8100)
-#define PROFF_SCC3 ((uint)0x8200)
-#define PROFF_SCC4 ((uint)0x8300)
-#define PROFF_FCC1 ((uint)0x8400)
-#define PROFF_FCC2 ((uint)0x8500)
-#define PROFF_FCC3 ((uint)0x8600)
-#define PROFF_MCC1 ((uint)0x8700)
-#define PROFF_SMC1_BASE ((uint)0x87fc)
-#define PROFF_IDMA1_BASE ((uint)0x87fe)
-#define PROFF_MCC2 ((uint)0x8800)
-#define PROFF_SMC2_BASE ((uint)0x88fc)
-#define PROFF_IDMA2_BASE ((uint)0x88fe)
-#define PROFF_SPI_BASE ((uint)0x89fc)
-#define PROFF_IDMA3_BASE ((uint)0x89fe)
-#define PROFF_TIMERS ((uint)0x8ae0)
-#define PROFF_REVNUM ((uint)0x8af0)
-#define PROFF_RAND ((uint)0x8af8)
-#define PROFF_I2C_BASE ((uint)0x8afc)
-#define PROFF_IDMA4_BASE ((uint)0x8afe)
-
-#define PROFF_SCC_SIZE ((uint)0x100)
-#define PROFF_FCC_SIZE ((uint)0x100)
-#define PROFF_SMC_SIZE ((uint)64)
-
-/* The SMCs are relocated to any of the first eight DPRAM pages.
- * We will fix these at the first locations of DPRAM, until we
- * get some microcode patches :-).
- * The parameter ram space for the SMCs is fifty-some bytes, and
- * they are required to start on a 64 byte boundary.
- */
-#define PROFF_SMC1 (0)
-#define PROFF_SMC2 (64)
-
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- uint smc_stmp; /* SDMA Temp */
-} smc_uart_t;
-
-/* SMC uart mode register (Internal memory map).
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10)
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
-#define FCC_GFMR_TCI ((uint)0x20000000)
-#define FCC_GFMR_TRX ((uint)0x10000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_CDP ((uint)0x04000000)
-#define FCC_GFMR_CTSP ((uint)0x02000000)
-#define FCC_GFMR_CDS ((uint)0x01000000)
-#define FCC_GFMR_CTSS ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
-#define FCC_GFMR_RTSM ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
-#define FCC_GFMR_REVD ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
-#define FCC_GFMR_ENR ((uint)0x00000020)
-#define FCC_GFMR_ENT ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
- ushort fcc_riptr; /* Rx Internal temp pointer */
- ushort fcc_tiptr; /* Tx Internal temp pointer */
- ushort fcc_res1;
- ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
- uint fcc_rstate; /* Upper byte is Func code, must be set */
- uint fcc_rbase; /* Receive BD base */
- ushort fcc_rbdstat; /* RxBD status */
- ushort fcc_rbdlen; /* RxBD down counter */
- uint fcc_rdptr; /* RxBD internal data pointer */
- uint fcc_tstate; /* Upper byte is Func code, must be set */
- uint fcc_tbase; /* Transmit BD base */
- ushort fcc_tbdstat; /* TxBD status */
- ushort fcc_tbdlen; /* TxBD down counter */
- uint fcc_tdptr; /* TxBD internal data pointer */
- uint fcc_rbptr; /* Rx BD Internal buf pointer */
- uint fcc_tbptr; /* Tx BD Internal buf pointer */
- uint fcc_rcrc; /* Rx temp CRC */
- uint fcc_res2;
- uint fcc_tcrc; /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
- fccp_t fen_genfcc;
- uint fen_statbuf; /* Internal status buffer */
- uint fen_camptr; /* CAM address */
- uint fen_cmask; /* Constant mask for CRC */
- uint fen_cpres; /* Preset CRC */
- uint fen_crcec; /* CRC Error counter */
- uint fen_alec; /* alignment error counter */
- uint fen_disfc; /* discard frame counter */
- ushort fen_retlim; /* Retry limit */
- ushort fen_retcnt; /* Retry counter */
- ushort fen_pper; /* Persistence */
- ushort fen_boffcnt; /* backoff counter */
- uint fen_gaddrh; /* Group address filter, high 32-bits */
- uint fen_gaddrl; /* Group address filter, low 32-bits */
- ushort fen_tfcstat; /* out of sequence TxBD */
- ushort fen_tfclen;
- uint fen_tfcptr;
- ushort fen_mflr; /* Maximum frame length (1518) */
- ushort fen_paddrh; /* MAC address */
- ushort fen_paddrm;
- ushort fen_paddrl;
- ushort fen_ibdcount; /* Internal BD counter */
- ushort fen_ibdstart; /* Internal BD start pointer */
- ushort fen_ibdend; /* Internal BD end pointer */
- ushort fen_txlen; /* Internal Tx frame length counter */
- uint fen_ibdbase[8]; /* Internal use */
- uint fen_iaddrh; /* Individual address filter */
- uint fen_iaddrl;
- ushort fen_minflr; /* Minimum frame length (64) */
- ushort fen_taddrh; /* Filter transfer MAC address */
- ushort fen_taddrm;
- ushort fen_taddrl;
- ushort fen_padptr; /* Pointer to pad byte buffer */
- ushort fen_cftype; /* control frame type */
- ushort fen_cfrange; /* control frame range */
- ushort fen_maxb; /* maximum BD count */
- ushort fen_maxd1; /* Max DMA1 length (1520) */
- ushort fen_maxd2; /* Max DMA2 length (1520) */
- ushort fen_maxd; /* internal max DMA count */
- ushort fen_dmacnt; /* internal DMA counter */
- uint fen_octc; /* Total octect counter */
- uint fen_colc; /* Total collision counter */
- uint fen_broc; /* Total broadcast packet counter */
- uint fen_mulc; /* Total multicast packet count */
- uint fen_uspc; /* Total packets < 64 bytes */
- uint fen_frgc; /* Total packets < 64 bytes with errors */
- uint fen_ospc; /* Total packets > 1518 */
- uint fen_jbrc; /* Total packets > 1518 with errors */
- uint fen_p64c; /* Total packets == 64 bytes */
- uint fen_p65c; /* Total packets 64 < bytes <= 127 */
- uint fen_p128c; /* Total packets 127 < bytes <= 255 */
- uint fen_p256c; /* Total packets 256 < bytes <= 511 */
- uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
- uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
- uint fen_cambuf; /* Internal CAM buffer poiner */
- ushort fen_rfthr; /* Received frames threshold */
- ushort fen_rfcnt; /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
-#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
-#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
-#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
-#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
-#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
-#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
-#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
-#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
-#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
-#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
-#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
-#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
-#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/* IDMA parameter RAM
-*/
-typedef struct idma {
- ushort ibase; /* IDMA buffer descriptor table base address */
- ushort dcm; /* DMA channel mode */
- ushort ibdptr; /* IDMA current buffer descriptor pointer */
- ushort dpr_buf; /* IDMA transfer buffer base address */
- ushort buf_inv; /* internal buffer inventory */
- ushort ss_max; /* steady-state maximum transfer size */
- ushort dpr_in_ptr; /* write pointer inside the internal buffer */
- ushort sts; /* source transfer size */
- ushort dpr_out_ptr; /* read pointer inside the internal buffer */
- ushort seob; /* source end of burst */
- ushort deob; /* destination end of burst */
- ushort dts; /* destination transfer size */
- ushort ret_add; /* return address when working in ERM=1 mode */
- ushort res0; /* reserved */
- uint bd_cnt; /* internal byte count */
- uint s_ptr; /* source internal data pointer */
- uint d_ptr; /* destination internal data pointer */
- uint istate; /* internal state */
- u_char res1[20]; /* pad to 64-byte length */
-} idma_t;
-
-/* DMA channel mode bit fields
-*/
-#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */
-#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */
-#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */
-#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */
-#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
-#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */
-#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */
-#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */
-#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */
-#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */
-#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */
-#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */
-#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */
-
-/* IDMA Buffer Descriptors
-*/
-typedef struct idma_bd {
- uint flags;
- uint len; /* data length */
- uint src; /* source data buffer pointer */
- uint dst; /* destination data buffer pointer */
-} idma_bd_t;
-
-/* IDMA buffer descriptor flag bit fields
-*/
-#define IDMA_BD_V ((uint)0x80000000) /* valid */
-#define IDMA_BD_W ((uint)0x20000000) /* wrap */
-#define IDMA_BD_I ((uint)0x10000000) /* interrupt */
-#define IDMA_BD_L ((uint)0x08000000) /* last */
-#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */
-#define IDMA_BD_SDN ((uint)0x00400000) /* source done */
-#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */
-#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */
-#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */
-#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */
-#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */
-#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */
-#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */
-#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */
-#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */
-
-/* per-channel IDMA registers
-*/
-typedef struct im_idma {
- u_char idsr; /* IDMAn event status register */
- u_char res0[3];
- u_char idmr; /* IDMAn event mask register */
- u_char res1[3];
-} im_idma_t;
-
-/* IDMA event register bit fields
-*/
-#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */
-#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */
-#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */
-#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */
-
-/* RISC Controller Configuration Register (RCCR) bit fields
-*/
-#define RCCR_TIME ((uint)0x80000000) /* timer enable */
-#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
-#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */
-#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */
-#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */
-#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */
-#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
-#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
-#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */
-#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */
-#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
-#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
-#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */
-#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */
-#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
-#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
-#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */
-#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */
-#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
-#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
-#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */
-#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */
-#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */
-#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */
-#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */
-#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */
-#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */
-#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */
-#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */
-#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */
-#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */
-#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */
-#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */
-#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */
-#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */
-#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */
-#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
-#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register
- */
-#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
-#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
-#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
-#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register
- */
-#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
-#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
-#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
-#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
-#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
-#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
-#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
-#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
-#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration Register 4-31
- */
-#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */
-#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */
-#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */
-#define SIUMCR_CDIS 0x10000000 /* Core Disable */
-#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/
-#define SIUMCR_DPPC01 0x04000000 /* - " - */
-#define SIUMCR_DPPC10 0x08000000 /* - " - */
-#define SIUMCR_DPPC11 0x0c000000 /* - " - */
-#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */
-#define SIUMCR_L2CPC01 0x01000000 /* - " - */
-#define SIUMCR_L2CPC10 0x02000000 /* - " - */
-#define SIUMCR_L2CPC11 0x03000000 /* - " - */
-#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */
-#define SIUMCR_LBPC01 0x00400000 /* - " - */
-#define SIUMCR_LBPC10 0x00800000 /* - " - */
-#define SIUMCR_LBPC11 0x00c00000 /* - " - */
-#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/
-#define SIUMCR_APPC01 0x00100000 /* - " - */
-#define SIUMCR_APPC10 0x00200000 /* - " - */
-#define SIUMCR_APPC11 0x00300000 /* - " - */
-#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */
-#define SIUMCR_CS10PC01 0x00040000 /* - " - */
-#define SIUMCR_CS10PC10 0x00080000 /* - " - */
-#define SIUMCR_CS10PC11 0x000c0000 /* - " - */
-#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */
-#define SIUMCR_BCTLC01 0x00010000 /* - " - */
-#define SIUMCR_BCTLC10 0x00020000 /* - " - */
-#define SIUMCR_BCTLC11 0x00030000 /* - " - */
-#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */
-#define SIUMCR_MMR01 0x00004000 /* - " - */
-#define SIUMCR_MMR10 0x00008000 /* - " - */
-#define SIUMCR_MMR11 0x0000c000 /* - " - */
-#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control Register 9-8
-*/
-#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */
-#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */
-#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */
-#define SCCR_PCIDF_SHIFT 3
-
-#ifndef CPM_IMMR_OFFSET
-#define CPM_IMMR_OFFSET 0x101a8
-#endif
-
-#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
-
-/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
- * in order to use clock-computing stuff below for the FCC x
- */
-
-/* Automatically generates register configurations */
-#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK ((uint)0xff000000)
-
-#define PC_F2RXCLK PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK ((uint)0x00ff0000)
-
-#define PC_F3RXCLK PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK ((uint)0x0000ff00)
-
-#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
-#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
-
-#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
-
-/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL 0x00000001U
-#define PA1_CRS 0x00000002U
-#define PA1_TXER 0x00000004U
-#define PA1_TXEN 0x00000008U
-#define PA1_RXDV 0x00000010U
-#define PA1_RXER 0x00000020U
-#define PA1_TXDAT 0x00003c00U
-#define PA1_RXDAT 0x0003c000U
-#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
- PA1_RXDV | PA1_RXER)
-#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER 0x00000001U
-#define PB2_RXDV 0x00000002U
-#define PB2_TXEN 0x00000004U
-#define PB2_RXER 0x00000008U
-#define PB2_COL 0x00000010U
-#define PB2_CRS 0x00000020U
-#define PB2_TXDAT 0x000003c0U
-#define PB2_RXDAT 0x00003c00U
-#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
- PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB1 (PB2_TXEN)
-#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV 0x00004000U
-#define PB3_RXER 0x00008000U
-#define PB3_TXER 0x00010000U
-#define PB3_TXEN 0x00020000U
-#define PB3_COL 0x00040000U
-#define PB3_CRS 0x00080000U
-#define PB3_TXDAT 0x0f000000U
-#define PC3_TXDAT 0x00000010U
-#define PB3_RXDAT 0x00f00000U
-#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
- PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB1 0
-#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
-#define PC3_DIRC1 (PC3_TXDAT)
-
-/* Handy macro to specify mem for FCCs*/
-#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
-#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
-
-/* Clocks and GRG's */
-
-enum cpm_clk_dir {
- CPM_CLK_RX,
- CPM_CLK_TX,
- CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
- CPM_CLK_SCC1,
- CPM_CLK_SCC2,
- CPM_CLK_SCC3,
- CPM_CLK_SCC4,
- CPM_CLK_FCC1,
- CPM_CLK_FCC2,
- CPM_CLK_FCC3
-};
-
-enum cpm_clk {
- CPM_CLK_NONE = 0,
- CPM_BRG1, /* Baud Rate Generator 1 */
- CPM_BRG2, /* Baud Rate Generator 2 */
- CPM_BRG3, /* Baud Rate Generator 3 */
- CPM_BRG4, /* Baud Rate Generator 4 */
- CPM_BRG5, /* Baud Rate Generator 5 */
- CPM_BRG6, /* Baud Rate Generator 6 */
- CPM_BRG7, /* Baud Rate Generator 7 */
- CPM_BRG8, /* Baud Rate Generator 8 */
- CPM_CLK1, /* Clock 1 */
- CPM_CLK2, /* Clock 2 */
- CPM_CLK3, /* Clock 3 */
- CPM_CLK4, /* Clock 4 */
- CPM_CLK5, /* Clock 5 */
- CPM_CLK6, /* Clock 6 */
- CPM_CLK7, /* Clock 7 */
- CPM_CLK8, /* Clock 8 */
- CPM_CLK9, /* Clock 9 */
- CPM_CLK10, /* Clock 10 */
- CPM_CLK11, /* Clock 11 */
- CPM_CLK12, /* Clock 12 */
- CPM_CLK13, /* Clock 13 */
- CPM_CLK14, /* Clock 14 */
- CPM_CLK15, /* Clock 15 */
- CPM_CLK16, /* Clock 16 */
- CPM_CLK17, /* Clock 17 */
- CPM_CLK18, /* Clock 18 */
- CPM_CLK19, /* Clock 19 */
- CPM_CLK20, /* Clock 20 */
- CPM_CLK_DUMMY
-};
-
-extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
-
-#endif /* __CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/delay.h b/include/asm-ppc/delay.h
deleted file mode 100644
index badde6845af..00000000000
--- a/include/asm-ppc/delay.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_DELAY_H
-#define _PPC_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright 1996, Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-extern unsigned long loops_per_jiffy;
-
-extern void __delay(unsigned int loops);
-
-/*
- * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
- * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
- *
- * The mulhwu instruction gives us loops = (a * b) / 2^32.
- * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
- * because this lets us support a wide range of HZ and
- * loops_per_jiffy values without either a or b overflowing 2^32.
- * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
- * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
- * (which corresponds to ~3800 bogomips at HZ = 100).
- * -- paulus
- */
-#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */
-#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */
-
-extern __inline__ void __udelay(unsigned int x)
-{
- unsigned int loops;
-
- __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
- "r" (x), "r" (loops_per_jiffy * 226));
- __delay(loops);
-}
-
-extern __inline__ void __ndelay(unsigned int x)
-{
- unsigned int loops;
-
- __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
- "r" (x), "r" (loops_per_jiffy * 5));
- __delay(loops);
-}
-
-extern void __bad_udelay(void); /* deliberately undefined */
-extern void __bad_ndelay(void); /* deliberately undefined */
-
-#define udelay(n) (__builtin_constant_p(n)? \
- ((n) > __MAX_UDELAY? __bad_udelay(): __udelay((n) * (19 * HZ))) : \
- __udelay((n) * (19 * HZ)))
-
-#define ndelay(n) (__builtin_constant_p(n)? \
- ((n) > __MAX_NDELAY? __bad_ndelay(): __ndelay((n) * HZ)) : \
- __ndelay((n) * HZ))
-
-#endif /* defined(_PPC_DELAY_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/device.h b/include/asm-ppc/device.h
deleted file mode 100644
index d8f9872b0e2..00000000000
--- a/include/asm-ppc/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h
deleted file mode 100644
index 7d9b3f430d9..00000000000
--- a/include/asm-ppc/floppy.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_FLOPPY_H
-#define __ASM_PPC_FLOPPY_H
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
-#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
-#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
-#define fd_dma_setup(addr, size, mode, io) fd_ops->_dma_setup(addr, size, mode, io)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
-
-static int fd_request_dma(void);
-
-struct fd_dma_ops {
- void (*_disable_dma)(unsigned int dmanr);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-};
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_vdma;
-static struct fd_dma_ops *fd_ops;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
- unsigned char st;
- int lcount;
- char *lptr;
-
- if (!doing_vdma)
- return floppy_interrupt(irq, dev_id);
-
-
- st = 1;
- for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if (st != 0xa0)
- break;
- if (virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
-
- if (st == 0x20)
- return IRQ_HANDLED;
- if (!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
- doing_vdma = 0;
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
- return IRQ_HANDLED;
-}
-
-static void vdma_disable_dma(unsigned int dummy)
-{
- doing_vdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if (can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
-}
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_vdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- /* actual, physical DMA */
- doing_vdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,(unsigned int)virt_to_bus(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_dma_ops real_dma_ops =
-{
- ._disable_dma = disable_dma,
- ._free_dma = free_dma,
- ._get_dma_residue = get_dma_residue,
- ._dma_setup = hard_dma_setup
-};
-
-static struct fd_dma_ops virt_dma_ops =
-{
- ._disable_dma = vdma_disable_dma,
- ._free_dma = vdma_nop,
- ._get_dma_residue = vdma_get_dma_residue,
- ._dma_setup = vdma_dma_setup
-};
-
-static int fd_request_dma()
-{
- if (can_use_virtual_dma & 1) {
- fd_ops = &virt_dma_ops;
- return 0;
- }
- else {
- fd_ops = &real_dma_ops;
- return request_dma(FLOPPY_DMA, "floppy");
- }
-}
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Again, the CMOS information not available
- */
-#define FLOPPY0_TYPE 6
-#define FLOPPY1_TYPE 0
-
-#define N_FDC 2 /* Don't change this! */
-#define N_DRIVE 8
-
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s) (0)
-
-#endif /* __ASM_PPC_FLOPPY_H */
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h
deleted file mode 100644
index 8691327653a..00000000000
--- a/include/asm-ppc/fs_pd.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Platform information definitions.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef FS_PD_H
-#define FS_PD_H
-
-static inline int uart_baudrate(void)
-{
- int baud;
- bd_t *bd = (bd_t *) __res;
-
- if (bd->bi_baudrate)
- baud = bd->bi_baudrate;
- else
- baud = -1;
- return baud;
-}
-
-static inline int uart_clock(void)
-{
- return (((bd_t *) __res)->bi_intfreq);
-}
-
-#define cpm2_map(member) (&cpm2_immr->member)
-#define cpm2_map_size(member, size) (&cpm2_immr->member)
-#define cpm2_unmap(addr) do {} while(0)
-
-#endif
diff --git a/include/asm-ppc/gg2.h b/include/asm-ppc/gg2.h
deleted file mode 100644
index 341ae55b99f..00000000000
--- a/include/asm-ppc/gg2.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is based on the following documentation:
- *
- * The VAS96011/12 Chipset, Data Book, Edition 1.0
- * VLSI Technology, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASMPPC_GG2_H
-#define _ASMPPC_GG2_H
-
- /*
- * Memory Map (CHRP mode)
- */
-
-#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */
-#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */
-#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */
-#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */
-#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
- /* special PCI cycles */
-#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */
-#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */
-
-
- /*
- * GG2 specific PCI Registers
- */
-
-extern void __iomem *gg2_pci_config_base; /* kernel virtual address */
-
-#define GG2_PCI_BUSNO 0x40 /* Bus number */
-#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */
-#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */
-#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */
-#define GG2_PCI_ADDR_MAP 0x5c /* Address map */
-#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */
-#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */
-#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */
-#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */
-#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */
-#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */
-#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */
-#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */
-#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */
-#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */
-#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */
-#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */
-#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */
-#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */
-#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */
- /* Cleared when read */
-
-#endif /* _ASMPPC_GG2_H */
diff --git a/include/asm-ppc/gt64260.h b/include/asm-ppc/gt64260.h
deleted file mode 100644
index 9e63b3cfffc..00000000000
--- a/include/asm-ppc/gt64260.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * include/asm-ppc/gt64260.h
- *
- * Prototypes, etc. for the Marvell/Galileo GT64260 host bridge routines.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_GT64260_H
-#define __ASMPPC_GT64260_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/gt64260_defs.h>
-
-
-extern u32 gt64260_base;
-extern u32 gt64260_irq_base; /* We handle the next 96 IRQs from here */
-extern u32 gt64260_revision;
-extern u8 gt64260_pci_exclude_bridge;
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* IRQs defined by the 64260 */
-#define GT64260_IRQ_MPSC0 40
-#define GT64260_IRQ_MPSC1 42
-#define GT64260_IRQ_SDMA 36
-
-/*
- * Define a default physical memory map to be set up on the bridge.
- * Also define a struct to pass that info from board-specific routines to
- * GT64260 generic set up routines. By passing this info in, the board
- * support developer can modify it at will.
- */
-
-/*
- * This is the default memory map:
- * CPU PCI
- * --- ---
- * PCI 0 I/O: 0xfa000000-0xfaffffff 0x00000000-0x00ffffff
- * PCI 1 I/O: 0xfb000000-0xfbffffff 0x01000000-0x01ffffff
- * PCI 0 MEM: 0x80000000-0x8fffffff 0x80000000-0x8fffffff
- * PCI 1 MEM: 0x90000000-0x9fffffff 0x90000000-0x9fffffff
- */
-
-/* Default physical memory map for the GT64260 bridge */
-
-/*
- * PCI Bus 0 Definitions
- */
-#define GT64260_PCI_0_IO_SIZE 0x01000000U
-#define GT64260_PCI_0_MEM_SIZE 0x10000000U
-
-/* Processor Physical addresses */
-#define GT64260_PCI_0_IO_START_PROC 0xfa000000U
-#define GT64260_PCI_0_IO_END_PROC (GT64260_PCI_0_IO_START_PROC + \
- GT64260_PCI_0_IO_SIZE - 1)
-
-/* PCI 0 addresses */
-#define GT64260_PCI_0_IO_START 0x00000000U
-#define GT64260_PCI_0_IO_END (GT64260_PCI_0_IO_START + \
- GT64260_PCI_0_IO_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_0_MEM_START_PROC 0x80000000U
-#define GT64260_PCI_0_MEM_END_PROC (GT64260_PCI_0_MEM_START_PROC + \
- GT64260_PCI_0_MEM_SIZE - 1)
-
-/* PCI 0 addresses */
-#define GT64260_PCI_0_MEM_START 0x80000000U
-#define GT64260_PCI_0_MEM_END (GT64260_PCI_0_MEM_START + \
- GT64260_PCI_0_MEM_SIZE - 1)
-
-/*
- * PCI Bus 1 Definitions
- */
-#define GT64260_PCI_1_IO_SIZE 0x01000000U
-#define GT64260_PCI_1_MEM_SIZE 0x10000000U
-
-/* PCI 1 addresses */
-#define GT64260_PCI_1_IO_START 0x01000000U
-#define GT64260_PCI_1_IO_END (GT64260_PCI_1_IO_START + \
- GT64260_PCI_1_IO_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_1_IO_START_PROC 0xfb000000U
-#define GT64260_PCI_1_IO_END_PROC (GT64260_PCI_1_IO_START_PROC + \
- GT64260_PCI_1_IO_SIZE - 1)
-
-/* PCI 1 addresses */
-#define GT64260_PCI_1_MEM_START 0x90000000U
-#define GT64260_PCI_1_MEM_END (GT64260_PCI_1_MEM_START + \
- GT64260_PCI_1_MEM_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_1_MEM_START_PROC 0x90000000U
-#define GT64260_PCI_1_MEM_END_PROC (GT64260_PCI_1_MEM_START_PROC + \
- GT64260_PCI_1_MEM_SIZE - 1)
-
-/* Define struct to pass mem-map info into gt64260_common.c code */
-typedef struct {
- struct pci_controller *hose_a;
- struct pci_controller *hose_b;
-
- u32 mem_size;
-
- u32 pci_0_io_start_proc;
- u32 pci_0_io_start_pci;
- u32 pci_0_io_size;
- u32 pci_0_io_swap;
-
- u32 pci_0_mem_start_proc;
- u32 pci_0_mem_start_pci_hi;
- u32 pci_0_mem_start_pci_lo;
- u32 pci_0_mem_size;
- u32 pci_0_mem_swap;
-
- u32 pci_1_io_start_proc;
- u32 pci_1_io_start_pci;
- u32 pci_1_io_size;
- u32 pci_1_io_swap;
-
- u32 pci_1_mem_start_proc;
- u32 pci_1_mem_start_pci_hi;
- u32 pci_1_mem_start_pci_lo;
- u32 pci_1_mem_size;
- u32 pci_1_mem_swap;
-} gt64260_bridge_info_t;
-
-#define GT64260_BRIDGE_INFO_DEFAULT(ip, ms) { \
- (ip)->mem_size = (ms); \
- \
- (ip)->pci_0_io_start_proc = GT64260_PCI_0_IO_START_PROC; \
- (ip)->pci_0_io_start_pci = GT64260_PCI_0_IO_START; \
- (ip)->pci_0_io_size = GT64260_PCI_0_IO_SIZE; \
- (ip)->pci_0_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_0_mem_start_proc = GT64260_PCI_0_MEM_START_PROC; \
- (ip)->pci_0_mem_start_pci_hi = 0x00000000; \
- (ip)->pci_0_mem_start_pci_lo = GT64260_PCI_0_MEM_START; \
- (ip)->pci_0_mem_size = GT64260_PCI_0_MEM_SIZE; \
- (ip)->pci_0_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_1_io_start_proc = GT64260_PCI_1_IO_START_PROC; \
- (ip)->pci_1_io_start_pci = GT64260_PCI_1_IO_START; \
- (ip)->pci_1_io_size = GT64260_PCI_1_IO_SIZE; \
- (ip)->pci_1_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_1_mem_start_proc = GT64260_PCI_1_MEM_START_PROC; \
- (ip)->pci_1_mem_start_pci_hi = 0x00000000; \
- (ip)->pci_1_mem_start_pci_lo = GT64260_PCI_1_MEM_START; \
- (ip)->pci_1_mem_size = GT64260_PCI_1_MEM_SIZE; \
- (ip)->pci_1_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
-}
-
-/*
- *****************************************************************************
- *
- * I/O macros to access the 64260's registers
- *
- *****************************************************************************
- */
-
-extern inline uint32_t gt_read(uint32_t offs){
- return (in_le32((volatile uint *)(gt64260_base + offs)));
-}
-extern inline void gt_write(uint32_t offs, uint32_t d){
- out_le32((volatile uint *)(gt64260_base + offs), d);
-}
-
-#if 0 /* paranoid SMP version */
-extern inline void gt_modify(u32 offs, u32 data, u32 mask) \
-{
- uint32_t reg;
- spin_lock(&gt64260_lock);
- reg = gt_read(offs) & (~mask); /* zero any bits we care about*/
- reg |= data & mask; /* set bits from the data */
- gt_write(offs, reg);
- spin_unlock(&gt64260_lock);
-}
-#else
-extern inline void gt_modify(uint32_t offs, uint32_t data, uint32_t mask)
-{
- uint32_t reg;
- reg = gt_read(offs) & (~(mask)); /* zero any bits we care about*/
- reg |= (data) & (mask); /* set bits from the data */
- gt_write(offs, reg);
-}
-#endif
-#define gt_set_bits(offs, bits) gt_modify(offs, ~0, bits)
-
-#define gt_clr_bits(offs, bits) gt_modify(offs, 0, bits)
-
-
-/*
- *****************************************************************************
- *
- * Function Prototypes
- *
- *****************************************************************************
- */
-
-int gt64260_find_bridges(u32 phys_base_addr, gt64260_bridge_info_t *info,
- int ((*map_irq)(struct pci_dev *, unsigned char, unsigned char)));
-int gt64260_bridge_init(gt64260_bridge_info_t *info);
-int gt64260_cpu_scs_set_window(u32 window,
- u32 base_addr,
- u32 size);
-int gt64260_cpu_cs_set_window(u32 window,
- u32 base_addr,
- u32 size);
-int gt64260_cpu_boot_set_window(u32 base_addr,
- u32 size);
-int gt64260_cpu_set_pci_io_window(u32 pci_bus,
- u32 cpu_base_addr,
- u32 pci_base_addr,
- u32 size,
- u32 swap);
-int gt64260_cpu_set_pci_mem_window(u32 pci_bus,
- u32 window,
- u32 cpu_base_addr,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 size,
- u32 swap_64bit);
-int gt64260_cpu_prot_set_window(u32 window,
- u32 base_addr,
- u32 size,
- u32 access_bits);
-int gt64260_cpu_snoop_set_window(u32 window,
- u32 base_addr,
- u32 size,
- u32 snoop_type);
-void gt64260_cpu_disable_all_windows(void);
-int gt64260_pci_bar_enable(u32 pci_bus, u32 enable_bits);
-int gt64260_pci_slave_scs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_cs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_boot_set_window(struct pci_controller *hose,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_p2p_mem_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_slave_p2p_io_set_window(struct pci_controller *hose,
- u32 pci_base_addr,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_scs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_cs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_boot_set_window(struct pci_controller *hose,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_p2p_mem_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_acc_cntl_set_window(u32 pci_bus,
- u32 window,
- u32 base_addr_hi,
- u32 base_addr_lo,
- u32 size,
- u32 features);
-int gt64260_pci_snoop_set_window(u32 pci_bus,
- u32 window,
- u32 base_addr_hi,
- u32 base_addr_lo,
- u32 size,
- u32 snoop_type);
-int gt64260_set_base(u32 new_base);
-int gt64260_get_base(u32 *base);
-int gt64260_pci_exclude_device(u8 bus, u8 devfn);
-
-void gt64260_init_irq(void);
-int gt64260_get_irq(void);
-
-void gt64260_mpsc_progress(char *s, unsigned short hex);
-
-#endif /* __ASMPPC_GT64260_H */
diff --git a/include/asm-ppc/gt64260_defs.h b/include/asm-ppc/gt64260_defs.h
deleted file mode 100644
index 6ffd01a5373..00000000000
--- a/include/asm-ppc/gt64260_defs.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * include/asm-ppc/gt64260_defs.h
- *
- * Register definitions for the Marvell/Galileo GT64260 host bridge.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_GT64260_DEFS_H
-#define __ASMPPC_GT64260_DEFS_H
-
-/*
- * Define a macro to represent the supported version of the 64260.
- */
-#define GT64260 0x01
-#define GT64260A 0x10
-
-/*
- *****************************************************************************
- *
- * CPU Interface Registers
- *
- *****************************************************************************
- */
-
-/* CPU physical address of 64260's registers */
-#define GT64260_INTERNAL_SPACE_DECODE 0x0068
-#define GT64260_INTERNAL_SPACE_SIZE 0x10000
-#define GT64260_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
-
-/* CPU Memory Controller Window Registers (4 windows) */
-#define GT64260_CPU_SCS_DECODE_WINDOWS 4
-
-#define GT64260_CPU_SCS_DECODE_0_BOT 0x0008
-#define GT64260_CPU_SCS_DECODE_0_TOP 0x0010
-#define GT64260_CPU_SCS_DECODE_1_BOT 0x0208
-#define GT64260_CPU_SCS_DECODE_1_TOP 0x0210
-#define GT64260_CPU_SCS_DECODE_2_BOT 0x0018
-#define GT64260_CPU_SCS_DECODE_2_TOP 0x0020
-#define GT64260_CPU_SCS_DECODE_3_BOT 0x0218
-#define GT64260_CPU_SCS_DECODE_3_TOP 0x0220
-
-/* CPU Device Controller Window Registers (4 windows) */
-#define GT64260_CPU_CS_DECODE_WINDOWS 4
-
-#define GT64260_CPU_CS_DECODE_0_BOT 0x0028
-#define GT64260_CPU_CS_DECODE_0_TOP 0x0030
-#define GT64260_CPU_CS_DECODE_1_BOT 0x0228
-#define GT64260_CPU_CS_DECODE_1_TOP 0x0230
-#define GT64260_CPU_CS_DECODE_2_BOT 0x0248
-#define GT64260_CPU_CS_DECODE_2_TOP 0x0250
-#define GT64260_CPU_CS_DECODE_3_BOT 0x0038
-#define GT64260_CPU_CS_DECODE_3_TOP 0x0040
-
-#define GT64260_CPU_BOOT_CS_DECODE_0_BOT 0x0238
-#define GT64260_CPU_BOOT_CS_DECODE_0_TOP 0x0240
-
-/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
-#define GT64260_PCI_BUSES 2
-#define GT64260_PCI_IO_WINDOWS_PER_BUS 1
-#define GT64260_PCI_MEM_WINDOWS_PER_BUS 4
-
-#define GT64260_CPU_PCI_SWAP_BYTE 0x00000000
-#define GT64260_CPU_PCI_SWAP_NONE 0x01000000
-#define GT64260_CPU_PCI_SWAP_BYTE_WORD 0x02000000
-#define GT64260_CPU_PCI_SWAP_WORD 0x03000000
-#define GT64260_CPU_PCI_SWAP_MASK 0x07000000
-
-#define GT64260_CPU_PCI_MEM_REQ64 (1<<27)
-
-#define GT64260_CPU_PCI_0_IO_DECODE_BOT 0x0048
-#define GT64260_CPU_PCI_0_IO_DECODE_TOP 0x0050
-#define GT64260_CPU_PCI_0_MEM_0_DECODE_BOT 0x0058
-#define GT64260_CPU_PCI_0_MEM_0_DECODE_TOP 0x0060
-#define GT64260_CPU_PCI_0_MEM_1_DECODE_BOT 0x0080
-#define GT64260_CPU_PCI_0_MEM_1_DECODE_TOP 0x0088
-#define GT64260_CPU_PCI_0_MEM_2_DECODE_BOT 0x0258
-#define GT64260_CPU_PCI_0_MEM_2_DECODE_TOP 0x0260
-#define GT64260_CPU_PCI_0_MEM_3_DECODE_BOT 0x0280
-#define GT64260_CPU_PCI_0_MEM_3_DECODE_TOP 0x0288
-
-#define GT64260_CPU_PCI_0_IO_REMAP 0x00f0
-#define GT64260_CPU_PCI_0_MEM_0_REMAP_LO 0x00f8
-#define GT64260_CPU_PCI_0_MEM_0_REMAP_HI 0x0320
-#define GT64260_CPU_PCI_0_MEM_1_REMAP_LO 0x0100
-#define GT64260_CPU_PCI_0_MEM_1_REMAP_HI 0x0328
-#define GT64260_CPU_PCI_0_MEM_2_REMAP_LO 0x02f8
-#define GT64260_CPU_PCI_0_MEM_2_REMAP_HI 0x0330
-#define GT64260_CPU_PCI_0_MEM_3_REMAP_LO 0x0300
-#define GT64260_CPU_PCI_0_MEM_3_REMAP_HI 0x0338
-
-#define GT64260_CPU_PCI_1_IO_DECODE_BOT 0x0090
-#define GT64260_CPU_PCI_1_IO_DECODE_TOP 0x0098
-#define GT64260_CPU_PCI_1_MEM_0_DECODE_BOT 0x00a0
-#define GT64260_CPU_PCI_1_MEM_0_DECODE_TOP 0x00a8
-#define GT64260_CPU_PCI_1_MEM_1_DECODE_BOT 0x00b0
-#define GT64260_CPU_PCI_1_MEM_1_DECODE_TOP 0x00b8
-#define GT64260_CPU_PCI_1_MEM_2_DECODE_BOT 0x02a0
-#define GT64260_CPU_PCI_1_MEM_2_DECODE_TOP 0x02a8
-#define GT64260_CPU_PCI_1_MEM_3_DECODE_BOT 0x02b0
-#define GT64260_CPU_PCI_1_MEM_3_DECODE_TOP 0x02b8
-
-#define GT64260_CPU_PCI_1_IO_REMAP 0x0108
-#define GT64260_CPU_PCI_1_MEM_0_REMAP_LO 0x0110
-#define GT64260_CPU_PCI_1_MEM_0_REMAP_HI 0x0340
-#define GT64260_CPU_PCI_1_MEM_1_REMAP_LO 0x0118
-#define GT64260_CPU_PCI_1_MEM_1_REMAP_HI 0x0348
-#define GT64260_CPU_PCI_1_MEM_2_REMAP_LO 0x0310
-#define GT64260_CPU_PCI_1_MEM_2_REMAP_HI 0x0350
-#define GT64260_CPU_PCI_1_MEM_3_REMAP_LO 0x0318
-#define GT64260_CPU_PCI_1_MEM_3_REMAP_HI 0x0358
-
-/* CPU Control Registers */
-#define GT64260_CPU_CONFIG 0x0000
-#define GT64260_CPU_MODE 0x0120
-#define GT64260_CPU_MASTER_CNTL 0x0160
-#define GT64260_CPU_XBAR_CNTL_LO 0x0150
-#define GT64260_CPU_XBAR_CNTL_HI 0x0158
-#define GT64260_CPU_XBAR_TO 0x0168
-#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
-#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
-
-/* CPU Sync Barrier Registers */
-#define GT64260_CPU_SYNC_BARRIER_PCI_0 0x00c0
-#define GT64260_CPU_SYNC_BARRIER_PCI_1 0x00c8
-
-/* CPU Access Protection Registers */
-#define GT64260_CPU_PROT_WINDOWS 8
-
-#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
-#define GT64260_CPU_PROT_WRPROTECT (1<<17)
-#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
-
-#define GT64260_CPU_PROT_BASE_0 0x0180
-#define GT64260_CPU_PROT_TOP_0 0x0188
-#define GT64260_CPU_PROT_BASE_1 0x0190
-#define GT64260_CPU_PROT_TOP_1 0x0198
-#define GT64260_CPU_PROT_BASE_2 0x01a0
-#define GT64260_CPU_PROT_TOP_2 0x01a8
-#define GT64260_CPU_PROT_BASE_3 0x01b0
-#define GT64260_CPU_PROT_TOP_3 0x01b8
-#define GT64260_CPU_PROT_BASE_4 0x01c0
-#define GT64260_CPU_PROT_TOP_4 0x01c8
-#define GT64260_CPU_PROT_BASE_5 0x01d0
-#define GT64260_CPU_PROT_TOP_5 0x01d8
-#define GT64260_CPU_PROT_BASE_6 0x01e0
-#define GT64260_CPU_PROT_TOP_6 0x01e8
-#define GT64260_CPU_PROT_BASE_7 0x01f0
-#define GT64260_CPU_PROT_TOP_7 0x01f8
-
-/* CPU Snoop Control Registers */
-#define GT64260_CPU_SNOOP_WINDOWS 4
-
-#define GT64260_CPU_SNOOP_NONE 0x00000000
-#define GT64260_CPU_SNOOP_WT 0x00010000
-#define GT64260_CPU_SNOOP_WB 0x00020000
-#define GT64260_CPU_SNOOP_MASK 0x00030000
-#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
-
-#define GT64260_CPU_SNOOP_BASE_0 0x0380
-#define GT64260_CPU_SNOOP_TOP_0 0x0388
-#define GT64260_CPU_SNOOP_BASE_1 0x0390
-#define GT64260_CPU_SNOOP_TOP_1 0x0398
-#define GT64260_CPU_SNOOP_BASE_2 0x03a0
-#define GT64260_CPU_SNOOP_TOP_2 0x03a8
-#define GT64260_CPU_SNOOP_BASE_3 0x03b0
-#define GT64260_CPU_SNOOP_TOP_3 0x03b8
-
-/* CPU Error Report Registers */
-#define GT64260_CPU_ERR_ADDR_LO 0x0070
-#define GT64260_CPU_ERR_ADDR_HI 0x0078
-#define GT64260_CPU_ERR_DATA_LO 0x0128
-#define GT64260_CPU_ERR_DATA_HI 0x0130
-#define GT64260_CPU_ERR_PARITY 0x0138
-#define GT64260_CPU_ERR_CAUSE 0x0140
-#define GT64260_CPU_ERR_MASK 0x0148
-
-
-/*
- *****************************************************************************
- *
- * SDRAM Cotnroller Registers
- *
- *****************************************************************************
- */
-
-/* SDRAM Config Registers */
-#define GT64260_SDRAM_CONFIG 0x0448
-#define GT64260_SDRAM_OPERATION_MODE 0x0474
-#define GT64260_SDRAM_ADDR_CNTL 0x047c
-#define GT64260_SDRAM_TIMING_PARAMS 0x04b4
-#define GT64260_SDRAM_UMA_CNTL 0x04a4
-#define GT64260_SDRAM_XBAR_CNTL_LO 0x04a8
-#define GT64260_SDRAM_XBAR_CNTL_HI 0x04ac
-#define GT64260_SDRAM_XBAR_CNTL_TO 0x04b0
-
-/* SDRAM Banks Parameters Registers */
-#define GT64260_SDRAM_BANK_PARAMS_0 0x044c
-#define GT64260_SDRAM_BANK_PARAMS_1 0x0450
-#define GT64260_SDRAM_BANK_PARAMS_2 0x0454
-#define GT64260_SDRAM_BANK_PARAMS_3 0x0458
-
-/* SDRAM Error Report Registers */
-#define GT64260_SDRAM_ERR_DATA_LO 0x0484
-#define GT64260_SDRAM_ERR_DATA_HI 0x0480
-#define GT64260_SDRAM_ERR_ADDR 0x0490
-#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
-#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
-#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
-#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
-
-
-/*
- *****************************************************************************
- *
- * Device/BOOT Cotnroller Registers
- *
- *****************************************************************************
- */
-
-/* Device Control Registers */
-#define GT64260_DEV_BANK_PARAMS_0 0x045c
-#define GT64260_DEV_BANK_PARAMS_1 0x0460
-#define GT64260_DEV_BANK_PARAMS_2 0x0464
-#define GT64260_DEV_BANK_PARAMS_3 0x0468
-#define GT64260_DEV_BOOT_PARAMS 0x046c
-#define GT64260_DEV_IF_CNTL 0x04c0
-#define GT64260_DEV_IF_XBAR_CNTL_LO 0x04c8
-#define GT64260_DEV_IF_XBAR_CNTL_HI 0x04cc
-#define GT64260_DEV_IF_XBAR_CNTL_TO 0x04c4
-
-/* Device Interrupt Registers */
-#define GT64260_DEV_INTR_CAUSE 0x04d0
-#define GT64260_DEV_INTR_MASK 0x04d4
-#define GT64260_DEV_INTR_ERR_ADDR 0x04d8
-
-
-/*
- *****************************************************************************
- *
- * PCI Bridge Interface Registers
- *
- *****************************************************************************
- */
-
-/* PCI Configuration Access Registers */
-#define GT64260_PCI_0_CONFIG_ADDR 0x0cf8
-#define GT64260_PCI_0_CONFIG_DATA 0x0cfc
-#define GT64260_PCI_0_IACK 0x0c34
-
-#define GT64260_PCI_1_CONFIG_ADDR 0x0c78
-#define GT64260_PCI_1_CONFIG_DATA 0x0c7c
-#define GT64260_PCI_1_IACK 0x0cb4
-
-/* PCI Control Registers */
-#define GT64260_PCI_0_CMD 0x0c00
-#define GT64260_PCI_0_MODE 0x0d00
-#define GT64260_PCI_0_TO_RETRY 0x0c04
-#define GT64260_PCI_0_RD_BUF_DISCARD_TIMER 0x0d04
-#define GT64260_PCI_0_MSI_TRIGGER_TIMER 0x0c38
-#define GT64260_PCI_0_ARBITER_CNTL 0x1d00
-#define GT64260_PCI_0_XBAR_CNTL_LO 0x1d08
-#define GT64260_PCI_0_XBAR_CNTL_HI 0x1d0c
-#define GT64260_PCI_0_XBAR_CNTL_TO 0x1d04
-#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_LO 0x1d18
-#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_HI 0x1d1c
-#define GT64260_PCI_0_SYNC_BARRIER 0x1d10
-#define GT64260_PCI_0_P2P_CONFIG 0x1d14
-#define GT64260_PCI_0_P2P_SWAP_CNTL 0x1d54
-
-#define GT64260_PCI_1_CMD 0x0c80
-#define GT64260_PCI_1_MODE 0x0d80
-#define GT64260_PCI_1_TO_RETRY 0x0c84
-#define GT64260_PCI_1_RD_BUF_DISCARD_TIMER 0x0d84
-#define GT64260_PCI_1_MSI_TRIGGER_TIMER 0x0cb8
-#define GT64260_PCI_1_ARBITER_CNTL 0x1d80
-#define GT64260_PCI_1_XBAR_CNTL_LO 0x1d88
-#define GT64260_PCI_1_XBAR_CNTL_HI 0x1d8c
-#define GT64260_PCI_1_XBAR_CNTL_TO 0x1d84
-#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_LO 0x1d98
-#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_HI 0x1d9c
-#define GT64260_PCI_1_SYNC_BARRIER 0x1d90
-#define GT64260_PCI_1_P2P_CONFIG 0x1d94
-#define GT64260_PCI_1_P2P_SWAP_CNTL 0x1dd4
-
-/* PCI Access Control Regions Registers */
-#define GT64260_PCI_ACC_CNTL_WINDOWS 8
-
-#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
-#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
-#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
-#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
-#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
-#define GT64260_PCI_ACC_CNTL_MBURST_4_WORDS 0x00000000
-#define GT64260_PCI_ACC_CNTL_MBURST_8_WORDS 0x00100000
-#define GT64260_PCI_ACC_CNTL_MBURST_16_WORDS 0x00200000
-#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
-#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
-#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
-#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
-#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
-
-#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
- GT64260_PCI_ACC_CNTL_DREADEN | \
- GT64260_PCI_ACC_CNTL_RDPREFETCH | \
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
- GT64260_PCI_ACC_CNTL_MBURST_MASK | \
- GT64260_PCI_ACC_CNTL_SWAP_MASK | \
- GT64260_PCI_ACC_CNTL_ACCPROT| \
- GT64260_PCI_ACC_CNTL_WRPROT)
-
-#define GT64260_PCI_0_ACC_CNTL_0_BASE_LO 0x1e00
-#define GT64260_PCI_0_ACC_CNTL_0_BASE_HI 0x1e04
-#define GT64260_PCI_0_ACC_CNTL_0_TOP 0x1e08
-#define GT64260_PCI_0_ACC_CNTL_1_BASE_LO 0x1e10
-#define GT64260_PCI_0_ACC_CNTL_1_BASE_HI 0x1e14
-#define GT64260_PCI_0_ACC_CNTL_1_TOP 0x1e18
-#define GT64260_PCI_0_ACC_CNTL_2_BASE_LO 0x1e20
-#define GT64260_PCI_0_ACC_CNTL_2_BASE_HI 0x1e24
-#define GT64260_PCI_0_ACC_CNTL_2_TOP 0x1e28
-#define GT64260_PCI_0_ACC_CNTL_3_BASE_LO 0x1e30
-#define GT64260_PCI_0_ACC_CNTL_3_BASE_HI 0x1e34
-#define GT64260_PCI_0_ACC_CNTL_3_TOP 0x1e38
-#define GT64260_PCI_0_ACC_CNTL_4_BASE_LO 0x1e40
-#define GT64260_PCI_0_ACC_CNTL_4_BASE_HI 0x1e44
-#define GT64260_PCI_0_ACC_CNTL_4_TOP 0x1e48
-#define GT64260_PCI_0_ACC_CNTL_5_BASE_LO 0x1e50
-#define GT64260_PCI_0_ACC_CNTL_5_BASE_HI 0x1e54
-#define GT64260_PCI_0_ACC_CNTL_5_TOP 0x1e58
-#define GT64260_PCI_0_ACC_CNTL_6_BASE_LO 0x1e60
-#define GT64260_PCI_0_ACC_CNTL_6_BASE_HI 0x1e64
-#define GT64260_PCI_0_ACC_CNTL_6_TOP 0x1e68
-#define GT64260_PCI_0_ACC_CNTL_7_BASE_LO 0x1e70
-#define GT64260_PCI_0_ACC_CNTL_7_BASE_HI 0x1e74
-#define GT64260_PCI_0_ACC_CNTL_7_TOP 0x1e78
-
-#define GT64260_PCI_1_ACC_CNTL_0_BASE_LO 0x1e80
-#define GT64260_PCI_1_ACC_CNTL_0_BASE_HI 0x1e84
-#define GT64260_PCI_1_ACC_CNTL_0_TOP 0x1e88
-#define GT64260_PCI_1_ACC_CNTL_1_BASE_LO 0x1e90
-#define GT64260_PCI_1_ACC_CNTL_1_BASE_HI 0x1e94
-#define GT64260_PCI_1_ACC_CNTL_1_TOP 0x1e98
-#define GT64260_PCI_1_ACC_CNTL_2_BASE_LO 0x1ea0
-#define GT64260_PCI_1_ACC_CNTL_2_BASE_HI 0x1ea4
-#define GT64260_PCI_1_ACC_CNTL_2_TOP 0x1ea8
-#define GT64260_PCI_1_ACC_CNTL_3_BASE_LO 0x1eb0
-#define GT64260_PCI_1_ACC_CNTL_3_BASE_HI 0x1eb4
-#define GT64260_PCI_1_ACC_CNTL_3_TOP 0x1eb8
-#define GT64260_PCI_1_ACC_CNTL_4_BASE_LO 0x1ec0
-#define GT64260_PCI_1_ACC_CNTL_4_BASE_HI 0x1ec4
-#define GT64260_PCI_1_ACC_CNTL_4_TOP 0x1ec8
-#define GT64260_PCI_1_ACC_CNTL_5_BASE_LO 0x1ed0
-#define GT64260_PCI_1_ACC_CNTL_5_BASE_HI 0x1ed4
-#define GT64260_PCI_1_ACC_CNTL_5_TOP 0x1ed8
-#define GT64260_PCI_1_ACC_CNTL_6_BASE_LO 0x1ee0
-#define GT64260_PCI_1_ACC_CNTL_6_BASE_HI 0x1ee4
-#define GT64260_PCI_1_ACC_CNTL_6_TOP 0x1ee8
-#define GT64260_PCI_1_ACC_CNTL_7_BASE_LO 0x1ef0
-#define GT64260_PCI_1_ACC_CNTL_7_BASE_HI 0x1ef4
-#define GT64260_PCI_1_ACC_CNTL_7_TOP 0x1ef8
-
-/* PCI Snoop Control Registers */
-#define GT64260_PCI_SNOOP_WINDOWS 4
-
-#define GT64260_PCI_SNOOP_NONE 0x00000000
-#define GT64260_PCI_SNOOP_WT 0x00001000
-#define GT64260_PCI_SNOOP_WB 0x00002000
-
-#define GT64260_PCI_0_SNOOP_0_BASE_LO 0x1f00
-#define GT64260_PCI_0_SNOOP_0_BASE_HI 0x1f04
-#define GT64260_PCI_0_SNOOP_0_TOP 0x1f08
-#define GT64260_PCI_0_SNOOP_1_BASE_LO 0x1f10
-#define GT64260_PCI_0_SNOOP_1_BASE_HI 0x1f14
-#define GT64260_PCI_0_SNOOP_1_TOP 0x1f18
-#define GT64260_PCI_0_SNOOP_2_BASE_LO 0x1f20
-#define GT64260_PCI_0_SNOOP_2_BASE_HI 0x1f24
-#define GT64260_PCI_0_SNOOP_2_TOP 0x1f28
-#define GT64260_PCI_0_SNOOP_3_BASE_LO 0x1f30
-#define GT64260_PCI_0_SNOOP_3_BASE_HI 0x1f34
-#define GT64260_PCI_0_SNOOP_3_TOP 0x1f38
-
-#define GT64260_PCI_1_SNOOP_0_BASE_LO 0x1f80
-#define GT64260_PCI_1_SNOOP_0_BASE_HI 0x1f84
-#define GT64260_PCI_1_SNOOP_0_TOP 0x1f88
-#define GT64260_PCI_1_SNOOP_1_BASE_LO 0x1f90
-#define GT64260_PCI_1_SNOOP_1_BASE_HI 0x1f94
-#define GT64260_PCI_1_SNOOP_1_TOP 0x1f98
-#define GT64260_PCI_1_SNOOP_2_BASE_LO 0x1fa0
-#define GT64260_PCI_1_SNOOP_2_BASE_HI 0x1fa4
-#define GT64260_PCI_1_SNOOP_2_TOP 0x1fa8
-#define GT64260_PCI_1_SNOOP_3_BASE_LO 0x1fb0
-#define GT64260_PCI_1_SNOOP_3_BASE_HI 0x1fb4
-#define GT64260_PCI_1_SNOOP_3_TOP 0x1fb8
-
-/* PCI Error Report Registers */
-#define GT64260_PCI_0_ERR_SERR_MASK 0x0c28
-#define GT64260_PCI_0_ERR_ADDR_LO 0x1d40
-#define GT64260_PCI_0_ERR_ADDR_HI 0x1d44
-#define GT64260_PCI_0_ERR_DATA_LO 0x1d48
-#define GT64260_PCI_0_ERR_DATA_HI 0x1d4c
-#define GT64260_PCI_0_ERR_CMD 0x1d50
-#define GT64260_PCI_0_ERR_CAUSE 0x1d58
-#define GT64260_PCI_0_ERR_MASK 0x1d5c
-
-#define GT64260_PCI_1_ERR_SERR_MASK 0x0ca8
-#define GT64260_PCI_1_ERR_ADDR_LO 0x1dc0
-#define GT64260_PCI_1_ERR_ADDR_HI 0x1dc4
-#define GT64260_PCI_1_ERR_DATA_LO 0x1dc8
-#define GT64260_PCI_1_ERR_DATA_HI 0x1dcc
-#define GT64260_PCI_1_ERR_CMD 0x1dd0
-#define GT64260_PCI_1_ERR_CAUSE 0x1dd8
-#define GT64260_PCI_1_ERR_MASK 0x1ddc
-
-/* PCI Slave Address Decoding Registers */
-#define GT64260_PCI_SCS_WINDOWS 4
-#define GT64260_PCI_CS_WINDOWS 4
-#define GT64260_PCI_BOOT_WINDOWS 1
-#define GT64260_PCI_P2P_MEM_WINDOWS 2
-#define GT64260_PCI_P2P_IO_WINDOWS 1
-#define GT64260_PCI_DAC_SCS_WINDOWS 4
-#define GT64260_PCI_DAC_CS_WINDOWS 4
-#define GT64260_PCI_DAC_BOOT_WINDOWS 1
-#define GT64260_PCI_DAC_P2P_MEM_WINDOWS 2
-
-#define GT64260_PCI_0_SLAVE_SCS_0_SIZE 0x0c08
-#define GT64260_PCI_0_SLAVE_SCS_1_SIZE 0x0d08
-#define GT64260_PCI_0_SLAVE_SCS_2_SIZE 0x0c0c
-#define GT64260_PCI_0_SLAVE_SCS_3_SIZE 0x0d0c
-#define GT64260_PCI_0_SLAVE_CS_0_SIZE 0x0c10
-#define GT64260_PCI_0_SLAVE_CS_1_SIZE 0x0d10
-#define GT64260_PCI_0_SLAVE_CS_2_SIZE 0x0d18
-#define GT64260_PCI_0_SLAVE_CS_3_SIZE 0x0c14
-#define GT64260_PCI_0_SLAVE_BOOT_SIZE 0x0d14
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_SIZE 0x0d1c
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_SIZE 0x0d20
-#define GT64260_PCI_0_SLAVE_P2P_IO_SIZE 0x0d24
-#define GT64260_PCI_0_SLAVE_CPU_SIZE 0x0d28
-
-#define GT64260_PCI_0_SLAVE_DAC_SCS_0_SIZE 0x0e00
-#define GT64260_PCI_0_SLAVE_DAC_SCS_1_SIZE 0x0e04
-#define GT64260_PCI_0_SLAVE_DAC_SCS_2_SIZE 0x0e08
-#define GT64260_PCI_0_SLAVE_DAC_SCS_3_SIZE 0x0e0c
-#define GT64260_PCI_0_SLAVE_DAC_CS_0_SIZE 0x0e10
-#define GT64260_PCI_0_SLAVE_DAC_CS_1_SIZE 0x0e14
-#define GT64260_PCI_0_SLAVE_DAC_CS_2_SIZE 0x0e18
-#define GT64260_PCI_0_SLAVE_DAC_CS_3_SIZE 0x0e1c
-#define GT64260_PCI_0_SLAVE_DAC_BOOT_SIZE 0x0e20
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_SIZE 0x0e24
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_SIZE 0x0e28
-#define GT64260_PCI_0_SLAVE_DAC_CPU_SIZE 0x0e2c
-
-#define GT64260_PCI_0_SLAVE_EXP_ROM_SIZE 0x0d2c
-
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_0 (1<<0)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_1 (1<<1)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_2 (1<<2)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_3 (1<<3)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_0 (1<<4)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_1 (1<<5)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_2 (1<<6)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_3 (1<<7)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_BOOT (1<<8)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_MEM (1<<9)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_IO (1<<10)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_0 (1<<11)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_1 (1<<12)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_IO (1<<13)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CPU (1<<14)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_0 (1<<15)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_1 (1<<16)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_2 (1<<17)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_3 (1<<18)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_0 (1<<19)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_1 (1<<20)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_2 (1<<21)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_3 (1<<22)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_BOOT (1<<23)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_0 (1<<24)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_1 (1<<25)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CPU (1<<26)
-
-#define GT64260_PCI_0_SLAVE_BAR_REG_ENABLES 0x0c3c
-#define GT64260_PCI_0_SLAVE_SCS_0_REMAP 0x0c48
-#define GT64260_PCI_0_SLAVE_SCS_1_REMAP 0x0d48
-#define GT64260_PCI_0_SLAVE_SCS_2_REMAP 0x0c4c
-#define GT64260_PCI_0_SLAVE_SCS_3_REMAP 0x0d4c
-#define GT64260_PCI_0_SLAVE_CS_0_REMAP 0x0c50
-#define GT64260_PCI_0_SLAVE_CS_1_REMAP 0x0d50
-#define GT64260_PCI_0_SLAVE_CS_2_REMAP 0x0d58
-#define GT64260_PCI_0_SLAVE_CS_3_REMAP 0x0c54
-#define GT64260_PCI_0_SLAVE_BOOT_REMAP 0x0d54
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
-#define GT64260_PCI_0_SLAVE_P2P_IO_REMAP 0x0d6c
-#define GT64260_PCI_0_SLAVE_CPU_REMAP 0x0d70
-
-#define GT64260_PCI_0_SLAVE_DAC_SCS_0_REMAP 0x0f00
-#define GT64260_PCI_0_SLAVE_DAC_SCS_1_REMAP 0x0f04
-#define GT64260_PCI_0_SLAVE_DAC_SCS_2_REMAP 0x0f08
-#define GT64260_PCI_0_SLAVE_DAC_SCS_3_REMAP 0x0f0c
-#define GT64260_PCI_0_SLAVE_DAC_CS_0_REMAP 0x0f10
-#define GT64260_PCI_0_SLAVE_DAC_CS_1_REMAP 0x0f14
-#define GT64260_PCI_0_SLAVE_DAC_CS_2_REMAP 0x0f18
-#define GT64260_PCI_0_SLAVE_DAC_CS_3_REMAP 0x0f1c
-#define GT64260_PCI_0_SLAVE_DAC_BOOT_REMAP 0x0f20
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0f24
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0f28
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0f2c
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0f30
-#define GT64260_PCI_0_SLAVE_DAC_CPU_REMAP 0x0f34
-
-#define GT64260_PCI_0_SLAVE_EXP_ROM_REMAP 0x0f38
-#define GT64260_PCI_0_SLAVE_PCI_DECODE_CNTL 0x0d3c
-
-#define GT64260_PCI_1_SLAVE_SCS_0_SIZE 0x0c88
-#define GT64260_PCI_1_SLAVE_SCS_1_SIZE 0x0d88
-#define GT64260_PCI_1_SLAVE_SCS_2_SIZE 0x0c8c
-#define GT64260_PCI_1_SLAVE_SCS_3_SIZE 0x0d8c
-#define GT64260_PCI_1_SLAVE_CS_0_SIZE 0x0c90
-#define GT64260_PCI_1_SLAVE_CS_1_SIZE 0x0d90
-#define GT64260_PCI_1_SLAVE_CS_2_SIZE 0x0d98
-#define GT64260_PCI_1_SLAVE_CS_3_SIZE 0x0c94
-#define GT64260_PCI_1_SLAVE_BOOT_SIZE 0x0d94
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_SIZE 0x0d9c
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_SIZE 0x0da0
-#define GT64260_PCI_1_SLAVE_P2P_IO_SIZE 0x0da4
-#define GT64260_PCI_1_SLAVE_CPU_SIZE 0x0da8
-
-#define GT64260_PCI_1_SLAVE_DAC_SCS_0_SIZE 0x0e80
-#define GT64260_PCI_1_SLAVE_DAC_SCS_1_SIZE 0x0e84
-#define GT64260_PCI_1_SLAVE_DAC_SCS_2_SIZE 0x0e88
-#define GT64260_PCI_1_SLAVE_DAC_SCS_3_SIZE 0x0e8c
-#define GT64260_PCI_1_SLAVE_DAC_CS_0_SIZE 0x0e90
-#define GT64260_PCI_1_SLAVE_DAC_CS_1_SIZE 0x0e94
-#define GT64260_PCI_1_SLAVE_DAC_CS_2_SIZE 0x0e98
-#define GT64260_PCI_1_SLAVE_DAC_CS_3_SIZE 0x0e9c
-#define GT64260_PCI_1_SLAVE_DAC_BOOT_SIZE 0x0ea0
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_SIZE 0x0ea4
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_SIZE 0x0ea8
-#define GT64260_PCI_1_SLAVE_DAC_CPU_SIZE 0x0eac
-
-#define GT64260_PCI_1_SLAVE_EXP_ROM_SIZE 0x0dac
-
-#define GT64260_PCI_1_SLAVE_BAR_REG_ENABLES 0x0cbc
-#define GT64260_PCI_1_SLAVE_SCS_0_REMAP 0x0cc8
-#define GT64260_PCI_1_SLAVE_SCS_1_REMAP 0x0dc8
-#define GT64260_PCI_1_SLAVE_SCS_2_REMAP 0x0ccc
-#define GT64260_PCI_1_SLAVE_SCS_3_REMAP 0x0dcc
-#define GT64260_PCI_1_SLAVE_CS_0_REMAP 0x0cd0
-#define GT64260_PCI_1_SLAVE_CS_1_REMAP 0x0dd0
-#define GT64260_PCI_1_SLAVE_CS_2_REMAP 0x0dd8
-#define GT64260_PCI_1_SLAVE_CS_3_REMAP 0x0cd4
-#define GT64260_PCI_1_SLAVE_BOOT_REMAP 0x0dd4
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
-#define GT64260_PCI_1_SLAVE_P2P_IO_REMAP 0x0dec
-#define GT64260_PCI_1_SLAVE_CPU_REMAP 0x0df0
-
-#define GT64260_PCI_1_SLAVE_DAC_SCS_0_REMAP 0x0f80
-#define GT64260_PCI_1_SLAVE_DAC_SCS_1_REMAP 0x0f84
-#define GT64260_PCI_1_SLAVE_DAC_SCS_2_REMAP 0x0f88
-#define GT64260_PCI_1_SLAVE_DAC_SCS_3_REMAP 0x0f8c
-#define GT64260_PCI_1_SLAVE_DAC_CS_0_REMAP 0x0f90
-#define GT64260_PCI_1_SLAVE_DAC_CS_1_REMAP 0x0f94
-#define GT64260_PCI_1_SLAVE_DAC_CS_2_REMAP 0x0f98
-#define GT64260_PCI_1_SLAVE_DAC_CS_3_REMAP 0x0f9c
-#define GT64260_PCI_1_SLAVE_DAC_BOOT_REMAP 0x0fa0
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0fa4
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0fa8
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0fac
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0fb0
-#define GT64260_PCI_1_SLAVE_DAC_CPU_REMAP 0x0fb4
-
-#define GT64260_PCI_1_SLAVE_EXP_ROM_REMAP 0x0fb8
-#define GT64260_PCI_1_SLAVE_PCI_DECODE_CNTL 0x0dbc
-
-
-/*
- *****************************************************************************
- *
- * I2O Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-
-/*
- *****************************************************************************
- *
- * DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Timer/Counter Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Communications Controller (Enet, Serial, etc.) Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_ENET_0_CNTL_LO 0xf200
-#define GT64260_ENET_0_CNTL_HI 0xf204
-#define GT64260_ENET_0_RX_BUF_PCI_ADDR_HI 0xf208
-#define GT64260_ENET_0_TX_BUF_PCI_ADDR_HI 0xf20c
-#define GT64260_ENET_0_RX_DESC_ADDR_HI 0xf210
-#define GT64260_ENET_0_TX_DESC_ADDR_HI 0xf214
-#define GT64260_ENET_0_HASH_TAB_PCI_ADDR_HI 0xf218
-#define GT64260_ENET_1_CNTL_LO 0xf220
-#define GT64260_ENET_1_CNTL_HI 0xf224
-#define GT64260_ENET_1_RX_BUF_PCI_ADDR_HI 0xf228
-#define GT64260_ENET_1_TX_BUF_PCI_ADDR_HI 0xf22c
-#define GT64260_ENET_1_RX_DESC_ADDR_HI 0xf230
-#define GT64260_ENET_1_TX_DESC_ADDR_HI 0xf234
-#define GT64260_ENET_1_HASH_TAB_PCI_ADDR_HI 0xf238
-#define GT64260_ENET_2_CNTL_LO 0xf240
-#define GT64260_ENET_2_CNTL_HI 0xf244
-#define GT64260_ENET_2_RX_BUF_PCI_ADDR_HI 0xf248
-#define GT64260_ENET_2_TX_BUF_PCI_ADDR_HI 0xf24c
-#define GT64260_ENET_2_RX_DESC_ADDR_HI 0xf250
-#define GT64260_ENET_2_TX_DESC_ADDR_HI 0xf254
-#define GT64260_ENET_2_HASH_TAB_PCI_ADDR_HI 0xf258
-
-#define GT64260_MPSC_0_CNTL_LO 0xf280
-#define GT64260_MPSC_0_CNTL_HI 0xf284
-#define GT64260_MPSC_0_RX_BUF_PCI_ADDR_HI 0xf288
-#define GT64260_MPSC_0_TX_BUF_PCI_ADDR_HI 0xf28c
-#define GT64260_MPSC_0_RX_DESC_ADDR_HI 0xf290
-#define GT64260_MPSC_0_TX_DESC_ADDR_HI 0xf294
-#define GT64260_MPSC_1_CNTL_LO 0xf2c0
-#define GT64260_MPSC_1_CNTL_HI 0xf2c4
-#define GT64260_MPSC_1_RX_BUF_PCI_ADDR_HI 0xf2c8
-#define GT64260_MPSC_1_TX_BUF_PCI_ADDR_HI 0xf2cc
-#define GT64260_MPSC_1_RX_DESC_ADDR_HI 0xf2d0
-#define GT64260_MPSC_1_TX_DESC_ADDR_HI 0xf2d4
-
-#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
-#define GT64260_SER_INIT_LAST_DATA 0xf324
-#define GT64260_SER_INIT_CONTROL 0xf328
-#define GT64260_SER_INIT_STATUS 0xf32c
-
-#define GT64260_COMM_ARBITER_CNTL 0xf300
-#define GT64260_COMM_CONFIG 0xb40c
-#define GT64260_COMM_XBAR_TO 0xf304
-#define GT64260_COMM_INTR_CAUSE 0xf310
-#define GT64260_COMM_INTR_MASK 0xf314
-#define GT64260_COMM_ERR_ADDR 0xf318
-
-
-/*
- *****************************************************************************
- *
- * Fast Ethernet Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_ENET_PHY_ADDR 0x2000
-#define GT64260_ENET_ESMIR 0x2010
-
-#define GT64260_ENET_E0PCR 0x2400
-#define GT64260_ENET_E0PCXR 0x2408
-#define GT64260_ENET_E0PCMR 0x2410
-#define GT64260_ENET_E0PSR 0x2418
-#define GT64260_ENET_E0SPR 0x2420
-#define GT64260_ENET_E0HTPR 0x2428
-#define GT64260_ENET_E0FCSAL 0x2430
-#define GT64260_ENET_E0FCSAH 0x2438
-#define GT64260_ENET_E0SDCR 0x2440
-#define GT64260_ENET_E0SDCMR 0x2448
-#define GT64260_ENET_E0ICR 0x2450
-#define GT64260_ENET_E0IMR 0x2458
-#define GT64260_ENET_E0FRDP0 0x2480
-#define GT64260_ENET_E0FRDP1 0x2484
-#define GT64260_ENET_E0FRDP2 0x2488
-#define GT64260_ENET_E0FRDP3 0x248c
-#define GT64260_ENET_E0CRDP0 0x24a0
-#define GT64260_ENET_E0CRDP1 0x24a4
-#define GT64260_ENET_E0CRDP2 0x24a8
-#define GT64260_ENET_E0CRDP3 0x24ac
-#define GT64260_ENET_E0CTDP0 0x24e0
-#define GT64260_ENET_E0CTDP1 0x24e4
-#define GT64260_ENET_0_DSCP2P0L 0x2460
-#define GT64260_ENET_0_DSCP2P0H 0x2464
-#define GT64260_ENET_0_DSCP2P1L 0x2468
-#define GT64260_ENET_0_DSCP2P1H 0x246c
-#define GT64260_ENET_0_VPT2P 0x2470
-#define GT64260_ENET_0_MIB_CTRS 0x2500
-
-#define GT64260_ENET_E1PCR 0x2800
-#define GT64260_ENET_E1PCXR 0x2808
-#define GT64260_ENET_E1PCMR 0x2810
-#define GT64260_ENET_E1PSR 0x2818
-#define GT64260_ENET_E1SPR 0x2820
-#define GT64260_ENET_E1HTPR 0x2828
-#define GT64260_ENET_E1FCSAL 0x2830
-#define GT64260_ENET_E1FCSAH 0x2838
-#define GT64260_ENET_E1SDCR 0x2840
-#define GT64260_ENET_E1SDCMR 0x2848
-#define GT64260_ENET_E1ICR 0x2850
-#define GT64260_ENET_E1IMR 0x2858
-#define GT64260_ENET_E1FRDP0 0x2880
-#define GT64260_ENET_E1FRDP1 0x2884
-#define GT64260_ENET_E1FRDP2 0x2888
-#define GT64260_ENET_E1FRDP3 0x288c
-#define GT64260_ENET_E1CRDP0 0x28a0
-#define GT64260_ENET_E1CRDP1 0x28a4
-#define GT64260_ENET_E1CRDP2 0x28a8
-#define GT64260_ENET_E1CRDP3 0x28ac
-#define GT64260_ENET_E1CTDP0 0x28e0
-#define GT64260_ENET_E1CTDP1 0x28e4
-#define GT64260_ENET_1_DSCP2P0L 0x2860
-#define GT64260_ENET_1_DSCP2P0H 0x2864
-#define GT64260_ENET_1_DSCP2P1L 0x2868
-#define GT64260_ENET_1_DSCP2P1H 0x286c
-#define GT64260_ENET_1_VPT2P 0x2870
-#define GT64260_ENET_1_MIB_CTRS 0x2900
-
-#define GT64260_ENET_E2PCR 0x2c00
-#define GT64260_ENET_E2PCXR 0x2c08
-#define GT64260_ENET_E2PCMR 0x2c10
-#define GT64260_ENET_E2PSR 0x2c18
-#define GT64260_ENET_E2SPR 0x2c20
-#define GT64260_ENET_E2HTPR 0x2c28
-#define GT64260_ENET_E2FCSAL 0x2c30
-#define GT64260_ENET_E2FCSAH 0x2c38
-#define GT64260_ENET_E2SDCR 0x2c40
-#define GT64260_ENET_E2SDCMR 0x2c48
-#define GT64260_ENET_E2ICR 0x2c50
-#define GT64260_ENET_E2IMR 0x2c58
-#define GT64260_ENET_E2FRDP0 0x2c80
-#define GT64260_ENET_E2FRDP1 0x2c84
-#define GT64260_ENET_E2FRDP2 0x2c88
-#define GT64260_ENET_E2FRDP3 0x2c8c
-#define GT64260_ENET_E2CRDP0 0x2ca0
-#define GT64260_ENET_E2CRDP1 0x2ca4
-#define GT64260_ENET_E2CRDP2 0x2ca8
-#define GT64260_ENET_E2CRDP3 0x2cac
-#define GT64260_ENET_E2CTDP0 0x2ce0
-#define GT64260_ENET_E2CTDP1 0x2ce4
-#define GT64260_ENET_2_DSCP2P0L 0x2c60
-#define GT64260_ENET_2_DSCP2P0H 0x2c64
-#define GT64260_ENET_2_DSCP2P1L 0x2c68
-#define GT64260_ENET_2_DSCP2P1H 0x2c6c
-#define GT64260_ENET_2_VPT2P 0x2c70
-#define GT64260_ENET_2_MIB_CTRS 0x2d00
-
-
-/*
- *****************************************************************************
- *
- * Multi-Protocol Serial Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* Signal Routing */
-#define GT64260_MPSC_MRR 0xb400
-#define GT64260_MPSC_RCRR 0xb404
-#define GT64260_MPSC_TCRR 0xb408
-
-/* Main Configuratino Registers */
-#define GT64260_MPSC_0_MMCRL 0x8000
-#define GT64260_MPSC_0_MMCRH 0x8004
-#define GT64260_MPSC_0_MPCR 0x8008
-#define GT64260_MPSC_0_CHR_1 0x800c
-#define GT64260_MPSC_0_CHR_2 0x8010
-#define GT64260_MPSC_0_CHR_3 0x8014
-#define GT64260_MPSC_0_CHR_4 0x8018
-#define GT64260_MPSC_0_CHR_5 0x801c
-#define GT64260_MPSC_0_CHR_6 0x8020
-#define GT64260_MPSC_0_CHR_7 0x8024
-#define GT64260_MPSC_0_CHR_8 0x8028
-#define GT64260_MPSC_0_CHR_9 0x802c
-#define GT64260_MPSC_0_CHR_10 0x8030
-#define GT64260_MPSC_0_CHR_11 0x8034
-
-#define GT64260_MPSC_1_MMCRL 0x9000
-#define GT64260_MPSC_1_MMCRH 0x9004
-#define GT64260_MPSC_1_MPCR 0x9008
-#define GT64260_MPSC_1_CHR_1 0x900c
-#define GT64260_MPSC_1_CHR_2 0x9010
-#define GT64260_MPSC_1_CHR_3 0x9014
-#define GT64260_MPSC_1_CHR_4 0x9018
-#define GT64260_MPSC_1_CHR_5 0x901c
-#define GT64260_MPSC_1_CHR_6 0x9020
-#define GT64260_MPSC_1_CHR_7 0x9024
-#define GT64260_MPSC_1_CHR_8 0x9028
-#define GT64260_MPSC_1_CHR_9 0x902c
-#define GT64260_MPSC_1_CHR_10 0x9030
-#define GT64260_MPSC_1_CHR_11 0x9034
-
-#define GT64260_MPSC_0_INTR_CAUSE 0xb804
-#define GT64260_MPSC_0_INTR_MASK 0xb884
-#define GT64260_MPSC_1_INTR_CAUSE 0xb80c
-#define GT64260_MPSC_1_INTR_MASK 0xb88c
-
-#define GT64260_MPSC_UART_CR_TEV (1<<1)
-#define GT64260_MPSC_UART_CR_TA (1<<7)
-#define GT64260_MPSC_UART_CR_TTCS (1<<9)
-#define GT64260_MPSC_UART_CR_REV (1<<17)
-#define GT64260_MPSC_UART_CR_RA (1<<23)
-#define GT64260_MPSC_UART_CR_CRD (1<<25)
-#define GT64260_MPSC_UART_CR_EH (1<<31)
-
-#define GT64260_MPSC_UART_ESR_CTS (1<<0)
-#define GT64260_MPSC_UART_ESR_CD (1<<1)
-#define GT64260_MPSC_UART_ESR_TIDLE (1<<3)
-#define GT64260_MPSC_UART_ESR_RHS (1<<5)
-#define GT64260_MPSC_UART_ESR_RLS (1<<7)
-#define GT64260_MPSC_UART_ESR_RLIDL (1<<11)
-
-
-/*
- *****************************************************************************
- *
- * Serial DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_SDMA_0_SDC 0x4000
-#define GT64260_SDMA_0_SDCM 0x4008
-#define GT64260_SDMA_0_RX_DESC 0x4800
-#define GT64260_SDMA_0_RX_BUF_PTR 0x4808
-#define GT64260_SDMA_0_SCRDP 0x4810
-#define GT64260_SDMA_0_TX_DESC 0x4c00
-#define GT64260_SDMA_0_SCTDP 0x4c10
-#define GT64260_SDMA_0_SFTDP 0x4c14
-
-#define GT64260_SDMA_1_SDC 0x6000
-#define GT64260_SDMA_1_SDCM 0x6008
-#define GT64260_SDMA_1_RX_DESC 0x6800
-#define GT64260_SDMA_1_RX_BUF_PTR 0x6808
-#define GT64260_SDMA_1_SCRDP 0x6810
-#define GT64260_SDMA_1_TX_DESC 0x6c00
-#define GT64260_SDMA_1_SCTDP 0x6c10
-#define GT64260_SDMA_1_SFTDP 0x6c14
-
-#define GT64260_SDMA_INTR_CAUSE 0xb800
-#define GT64260_SDMA_INTR_MASK 0xb880
-
-#define GT64260_SDMA_DESC_CMDSTAT_PE (1<<0)
-#define GT64260_SDMA_DESC_CMDSTAT_CDL (1<<1)
-#define GT64260_SDMA_DESC_CMDSTAT_FR (1<<3)
-#define GT64260_SDMA_DESC_CMDSTAT_OR (1<<6)
-#define GT64260_SDMA_DESC_CMDSTAT_BR (1<<9)
-#define GT64260_SDMA_DESC_CMDSTAT_MI (1<<10)
-#define GT64260_SDMA_DESC_CMDSTAT_A (1<<11)
-#define GT64260_SDMA_DESC_CMDSTAT_AM (1<<12)
-#define GT64260_SDMA_DESC_CMDSTAT_CT (1<<13)
-#define GT64260_SDMA_DESC_CMDSTAT_C (1<<14)
-#define GT64260_SDMA_DESC_CMDSTAT_ES (1<<15)
-#define GT64260_SDMA_DESC_CMDSTAT_L (1<<16)
-#define GT64260_SDMA_DESC_CMDSTAT_F (1<<17)
-#define GT64260_SDMA_DESC_CMDSTAT_P (1<<18)
-#define GT64260_SDMA_DESC_CMDSTAT_EI (1<<23)
-#define GT64260_SDMA_DESC_CMDSTAT_O (1<<31)
-
-#define GT64260_SDMA_SDC_RFT (1<<0)
-#define GT64260_SDMA_SDC_SFM (1<<1)
-#define GT64260_SDMA_SDC_BLMR (1<<6)
-#define GT64260_SDMA_SDC_BLMT (1<<7)
-#define GT64260_SDMA_SDC_POVR (1<<8)
-#define GT64260_SDMA_SDC_RIFB (1<<9)
-
-#define GT64260_SDMA_SDCM_ERD (1<<7)
-#define GT64260_SDMA_SDCM_AR (1<<15)
-#define GT64260_SDMA_SDCM_STD (1<<16)
-#define GT64260_SDMA_SDCM_TXD (1<<23)
-#define GT64260_SDMA_SDCM_AT (1<<31)
-
-#define GT64260_SDMA_0_CAUSE_RXBUF (1<<0)
-#define GT64260_SDMA_0_CAUSE_RXERR (1<<1)
-#define GT64260_SDMA_0_CAUSE_TXBUF (1<<2)
-#define GT64260_SDMA_0_CAUSE_TXEND (1<<3)
-#define GT64260_SDMA_1_CAUSE_RXBUF (1<<8)
-#define GT64260_SDMA_1_CAUSE_RXERR (1<<9)
-#define GT64260_SDMA_1_CAUSE_TXBUF (1<<10)
-#define GT64260_SDMA_1_CAUSE_TXEND (1<<11)
-
-
-/*
- *****************************************************************************
- *
- * Baud Rate Generator Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_BRG_0_BCR 0xb200
-#define GT64260_BRG_0_BTR 0xb204
-#define GT64260_BRG_1_BCR 0xb208
-#define GT64260_BRG_1_BTR 0xb20c
-#define GT64260_BRG_2_BCR 0xb210
-#define GT64260_BRG_2_BTR 0xb214
-
-#define GT64260_BRG_INTR_CAUSE 0xb834
-#define GT64260_BRG_INTR_MASK 0xb8b4
-
-
-/*
- *****************************************************************************
- *
- * Watchdog Timer Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_WDT_WDC 0xb410
-#define GT64260_WDT_WDV 0xb414
-
-
-/*
- *****************************************************************************
- *
- * General Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_GPP_IO_CNTL 0xf100
-#define GT64260_GPP_LEVEL_CNTL 0xf110
-#define GT64260_GPP_VALUE 0xf104
-#define GT64260_GPP_INTR_CAUSE 0xf108
-#define GT64260_GPP_INTR_MASK 0xf10c
-
-
-/*
- *****************************************************************************
- *
- * Multi-Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_MPP_CNTL_0 0xf000
-#define GT64260_MPP_CNTL_1 0xf004
-#define GT64260_MPP_CNTL_2 0xf008
-#define GT64260_MPP_CNTL_3 0xf00c
-#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
-
-
-/*
- *****************************************************************************
- *
- * I2C Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Interrupt Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
-#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
-#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
-#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
-#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
-#define GT64260_IC_PCI_0_INTR_MASK_LO 0x0c24
-#define GT64260_IC_PCI_0_INTR_MASK_HI 0x0c64
-#define GT64260_IC_PCI_0_SELECT_CAUSE 0x0c74
-#define GT64260_IC_PCI_1_INTR_MASK_LO 0x0ca4
-#define GT64260_IC_PCI_1_INTR_MASK_HI 0x0ce4
-#define GT64260_IC_PCI_1_SELECT_CAUSE 0x0cf4
-#define GT64260_IC_CPU_INT_0_MASK 0x0e60
-#define GT64260_IC_CPU_INT_1_MASK 0x0e64
-#define GT64260_IC_CPU_INT_2_MASK 0x0e68
-#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
-
-
-#endif /* __ASMPPC_GT64260_DEFS_H */
diff --git a/include/asm-ppc/harrier.h b/include/asm-ppc/harrier.h
deleted file mode 100644
index 7acd7fc126e..00000000000
--- a/include/asm-ppc/harrier.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Definitions for Motorola MCG Harrier North Bridge & Memory controller
- *
- * Author: Dale Farnsworth
- * dale.farnsworth@mvista.com
- *
- * Modified by: Randy Vinson
- * rvinson@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASMPPC_HARRIER_H
-#define __ASMPPC_HARRIER_H
-
-#include <linux/types.h>
-#include <asm/pci-bridge.h>
-
-struct pci_controller;
-int harrier_init(struct pci_controller *hose,
- uint ppc_reg_base,
- ulong processor_pci_mem_start,
- ulong processor_pci_mem_end,
- ulong processor_pci_io_start,
- ulong processor_pci_io_end,
- ulong processor_mpic_base);
-
-unsigned long harrier_get_mem_size(uint smc_base);
-
-int harrier_mpic_init(unsigned int pci_mem_offset);
-
-void harrier_setup_nonmonarch(uint ppc_reg_base,
- uint in0_size);
-void harrier_release_eready(uint ppc_reg_base);
-
-void harrier_wait_eready(uint ppc_reg_base);
-
-#endif /* __ASMPPC_HARRIER_H */
diff --git a/include/asm-ppc/hawk.h b/include/asm-ppc/hawk.h
deleted file mode 100644
index f347007d22a..00000000000
--- a/include/asm-ppc/hawk.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-ppc/hawk.h
- *
- * Support functions for MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001,2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_HAWK_H
-#define __ASMPPC_HAWK_H
-
-#include <asm/pci-bridge.h>
-#include <asm/hawk_defs.h>
-
-extern int hawk_init(struct pci_controller *hose,
- unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
- unsigned long processor_pci_mem_end,
- unsigned long processor_pci_io_start,
- unsigned long processor_pci_io_end,
- unsigned long processor_mpic_base);
-extern unsigned long hawk_get_mem_size(unsigned int smc_base);
-extern int hawk_mpic_init(unsigned int pci_mem_offset);
-
-#endif /* __ASMPPC_HAWK_H */
diff --git a/include/asm-ppc/hawk_defs.h b/include/asm-ppc/hawk_defs.h
deleted file mode 100644
index 6d1d2baf648..00000000000
--- a/include/asm-ppc/hawk_defs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-ppc/hawk_defs.h
- *
- * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_HAWK_DEFS_H
-#define __ASMPPC_HAWK_DEFS_H
-
-#include <asm/pci-bridge.h>
-
-/*
- * The Falcon/Raven and HAWK have 4 sets of registers:
- * 1) PPC Registers which define the mappings from PPC bus to PCI bus,
- * etc.
- * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- * MPIC base address.
- * 3) MPIC registers
- * 4) System Memory Controller (SMC) registers.
- */
-
-#define HAWK_PCI_CONFIG_ADDR_OFF 0x00000cf8
-#define HAWK_PCI_CONFIG_DATA_OFF 0x00000cfc
-
-#define HAWK_MPIC_SIZE 0x00040000U
-#define HAWK_SMC_SIZE 0x00001000U
-
-/*
- * Define PPC register offsets.
- */
-#define HAWK_PPC_XSADD0_OFF 0x40
-#define HAWK_PPC_XSOFF0_OFF 0x44
-#define HAWK_PPC_XSADD1_OFF 0x48
-#define HAWK_PPC_XSOFF1_OFF 0x4c
-#define HAWK_PPC_XSADD2_OFF 0x50
-#define HAWK_PPC_XSOFF2_OFF 0x54
-#define HAWK_PPC_XSADD3_OFF 0x58
-#define HAWK_PPC_XSOFF3_OFF 0x5c
-
-/*
- * Define PCI register offsets.
- */
-#define HAWK_PCI_PSADD0_OFF 0x80
-#define HAWK_PCI_PSOFF0_OFF 0x84
-#define HAWK_PCI_PSADD1_OFF 0x88
-#define HAWK_PCI_PSOFF1_OFF 0x8c
-#define HAWK_PCI_PSADD2_OFF 0x90
-#define HAWK_PCI_PSOFF2_OFF 0x94
-#define HAWK_PCI_PSADD3_OFF 0x98
-#define HAWK_PCI_PSOFF3_OFF 0x9c
-
-/*
- * Define the System Memory Controller (SMC) register offsets.
- */
-#define HAWK_SMC_RAM_A_SIZE_REG_OFF 0x10
-#define HAWK_SMC_RAM_B_SIZE_REG_OFF 0x11
-#define HAWK_SMC_RAM_C_SIZE_REG_OFF 0x12
-#define HAWK_SMC_RAM_D_SIZE_REG_OFF 0x13
-#define HAWK_SMC_RAM_E_SIZE_REG_OFF 0xc0 /* HAWK Only */
-#define HAWK_SMC_RAM_F_SIZE_REG_OFF 0xc1 /* HAWK Only */
-#define HAWK_SMC_RAM_G_SIZE_REG_OFF 0xc2 /* HAWK Only */
-#define HAWK_SMC_RAM_H_SIZE_REG_OFF 0xc3 /* HAWK Only */
-
-#define FALCON_SMC_REG_COUNT 4
-#define HAWK_SMC_REG_COUNT 8
-#endif /* __ASMPPC_HAWK_DEFS_H */
diff --git a/include/asm-ppc/highmem.h b/include/asm-ppc/highmem.h
deleted file mode 100644
index f7b21ee302b..00000000000
--- a/include/asm-ppc/highmem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- * Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-
-/* undef for production */
-#define HIGHMEM_DEBUG 1
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define PKMAP_BASE CONFIG_HIGHMEM_START
-#define LAST_PKMAP (1 << PTE_SHIFT)
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL)
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline void *kmap(struct page *page)
-{
- might_sleep();
- if (!PageHighMem(page))
- return page_address(page);
- return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
- BUG_ON(in_interrupt());
- if (!PageHighMem(page))
- return;
- kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
-#ifdef HIGHMEM_DEBUG
- BUG_ON(!pte_none(*(kmap_pte+idx)));
-#endif
- set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot));
- flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef HIGHMEM_DEBUG
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < KMAP_FIX_BEGIN) { // FIXME
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE);
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte+idx);
- flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
- unsigned long idx, vaddr = (unsigned long) ptr;
-
- if (vaddr < KMAP_FIX_BEGIN)
- return virt_to_page(ptr);
-
- idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT;
- return pte_page(kmap_pte[idx]);
-}
-
-#define flush_cache_kmaps() flush_cache_all()
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-ppc/hydra.h b/include/asm-ppc/hydra.h
deleted file mode 100644
index 1ad4eed07fb..00000000000
--- a/include/asm-ppc/hydra.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is based on the following documentation:
- *
- * Macintosh Technology in the Common Hardware Reference Platform
- * Apple Computer, Inc.
- *
- * © Copyright 1995 Apple Computer, Inc. All rights reserved.
- *
- * It's available online from http://chrp.apple.com/MacTech.pdf.
- * You can obtain paper copies of this book from computer bookstores or by
- * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
- * Francisco, CA 94104. Reference ISBN 1-55860-393-X.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASMPPC_HYDRA_H
-#define _ASMPPC_HYDRA_H
-
-#ifdef __KERNEL__
-
-struct Hydra {
- /* DBDMA Controller Register Space */
- char Pad1[0x30];
- u_int CachePD;
- u_int IDs;
- u_int Feature_Control;
- char Pad2[0x7fc4];
- /* DBDMA Channel Register Space */
- char SCSI_DMA[0x100];
- char Pad3[0x300];
- char SCCA_Tx_DMA[0x100];
- char SCCA_Rx_DMA[0x100];
- char SCCB_Tx_DMA[0x100];
- char SCCB_Rx_DMA[0x100];
- char Pad4[0x7800];
- /* Device Register Space */
- char SCSI[0x1000];
- char ADB[0x1000];
- char SCC_Legacy[0x1000];
- char SCC[0x1000];
- char Pad9[0x2000];
- char VIA[0x2000];
- char Pad10[0x28000];
- char OpenPIC[0x40000];
-};
-
-extern volatile struct Hydra __iomem *Hydra;
-
-
- /*
- * Feature Control Register
- */
-
-#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */
-#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */
-#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */
-#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */
-#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */
-#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */
-#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */
-#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */
-#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */
-
-
- /*
- * OpenPIC Interrupt Sources
- */
-
-#define HYDRA_INT_SIO 0
-#define HYDRA_INT_SCSI_DMA 1
-#define HYDRA_INT_SCCA_TX_DMA 2
-#define HYDRA_INT_SCCA_RX_DMA 3
-#define HYDRA_INT_SCCB_TX_DMA 4
-#define HYDRA_INT_SCCB_RX_DMA 5
-#define HYDRA_INT_SCSI 6
-#define HYDRA_INT_SCCA 7
-#define HYDRA_INT_SCCB 8
-#define HYDRA_INT_VIA 9
-#define HYDRA_INT_ADB 10
-#define HYDRA_INT_ADB_NMI 11
-#define HYDRA_INT_EXT1 12 /* PCI IRQW */
-#define HYDRA_INT_EXT2 13 /* PCI IRQX */
-#define HYDRA_INT_EXT3 14 /* PCI IRQY */
-#define HYDRA_INT_EXT4 15 /* PCI IRQZ */
-#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */
-#define HYDRA_INT_EXT6 17 /* IDE Secondary */
-#define HYDRA_INT_EXT7 18 /* Power Off Request */
-#define HYDRA_INT_SPARE 19
-
-extern int hydra_init(void);
-extern void macio_adb_init(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-ppc/ibm403.h b/include/asm-ppc/ibm403.h
deleted file mode 100644
index c9c5d539cfd..00000000000
--- a/include/asm-ppc/ibm403.h
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Authors: Armin Kuster <akuster@mvista.com> and Tom Rini <trini@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM403_H__
-#define __ASM_IBM403_H__
-
-
-#if defined(CONFIG_403GCX)
-
-#define DCRN_BE_BASE 0x090
-#define DCRN_DMA0_BASE 0x0C0
-#define DCRN_DMA1_BASE 0x0C8
-#define DCRN_DMA2_BASE 0x0D0
-#define DCRN_DMA3_BASE 0x0D8
-#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
-#define DCRN_DMASR_BASE 0x0E0
-
-#define DCRN_EXIER_BASE 0x042
-#define DCRN_EXISR_BASE 0x040
-#define DCRN_IOCR_BASE 0x0A0
-
-
-/* ------------------------------------------------------------------------- */
-#endif
-
-
-
-#ifdef DCRN_BE_BASE
-#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
-#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register*/
-#endif
-/* DCRN_BESR */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-
-#ifdef DCRN_CHCR_BASE
-#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
-#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
-#endif
-#define CHR1_CETE 0x00800000 /* CPU external timer enable */
-#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
-
-#ifdef DCRN_CHPSR_BASE
-#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
-#endif
-
-#ifdef DCRN_CIC_BASE
-#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
-#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
-#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
-#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
-#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
-#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
-#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
-#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
-#endif
-
-#ifdef DCRN_CPMFR_BASE
-#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
-#endif
-
-#ifndef CPM_AUD
-#define CPM_AUD 0x00000000
-#endif
-#ifndef CPM_BRG
-#define CPM_BRG 0x00000000
-#endif
-#ifndef CPM_CBS
-#define CPM_CBS 0x00000000
-#endif
-#ifndef CPM_CPU
-#define CPM_CPU 0x00000000
-#endif
-#ifndef CPM_DCP
-#define CPM_DCP 0x00000000
-#endif
-#ifndef CPM_DCRX
-#define CPM_DCRX 0x00000000
-#endif
-#ifndef CPM_DENC
-#define CPM_DENC 0x00000000
-#endif
-#ifndef CPM_DMA
-#define CPM_DMA 0x00000000
-#endif
-#ifndef CPM_DSCR
-#define CPM_DSCR 0x00000000
-#endif
-#ifndef CPM_EBC
-#define CPM_EBC 0x00000000
-#endif
-#ifndef CPM_EBIU
-#define CPM_EBIU 0x00000000
-#endif
-#ifndef CPM_EMAC_MM
-#define CPM_EMAC_MM 0x00000000
-#endif
-#ifndef CPM_EMAC_RM
-#define CPM_EMAC_RM 0x00000000
-#endif
-#ifndef CPM_EMAC_TM
-#define CPM_EMAC_TM 0x00000000
-#endif
-#ifndef CPM_GPIO0
-#define CPM_GPIO0 0x00000000
-#endif
-#ifndef CPM_GPT
-#define CPM_GPT 0x00000000
-#endif
-#ifndef CPM_I1284
-#define CPM_I1284 0x00000000
-#endif
-#ifndef CPM_IIC0
-#define CPM_IIC0 0x00000000
-#endif
-#ifndef CPM_IIC1
-#define CPM_IIC1 0x00000000
-#endif
-#ifndef CPM_MSI
-#define CPM_MSI 0x00000000
-#endif
-#ifndef CPM_PCI
-#define CPM_PCI 0x00000000
-#endif
-#ifndef CPM_PLB
-#define CPM_PLB 0x00000000
-#endif
-#ifndef CPM_SC0
-#define CPM_SC0 0x00000000
-#endif
-#ifndef CPM_SC1
-#define CPM_SC1 0x00000000
-#endif
-#ifndef CPM_SDRAM0
-#define CPM_SDRAM0 0x00000000
-#endif
-#ifndef CPM_SDRAM1
-#define CPM_SDRAM1 0x00000000
-#endif
-#ifndef CPM_TMRCLK
-#define CPM_TMRCLK 0x00000000
-#endif
-#ifndef CPM_UART0
-#define CPM_UART0 0x00000000
-#endif
-#ifndef CPM_UART1
-#define CPM_UART1 0x00000000
-#endif
-#ifndef CPM_UART2
-#define CPM_UART2 0x00000000
-#endif
-#ifndef CPM_UIC
-#define CPM_UIC 0x00000000
-#endif
-#ifndef CPM_VID2
-#define CPM_VID2 0x00000000
-#endif
-#ifndef CPM_XPT27
-#define CPM_XPT27 0x00000000
-#endif
-#ifndef CPM_XPT54
-#define CPM_XPT54 0x00000000
-#endif
-
-#ifdef DCRN_CPMSR_BASE
-#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
-#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
-#endif
-
-#ifdef DCRN_DCP0_BASE
-#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0) /* Decompression Controller Address */
-#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1) /* Decompression Controller Data */
-#endif
-
-#ifdef DCRN_DCRX_BASE
-#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
-#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
-#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
-#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
-#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
-#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
-#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
-#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
-#endif
-
-#ifdef DCRN_DMA0_BASE
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control Register 0 */
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2) /* DMA Destination Address Register 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Source Address Register 0 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4) /* DMA Chained Count Register 0 */
-#endif
-
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 0 */
-#endif
-#endif
-
-#ifdef DCRN_DMA1_BASE
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control Register 1 */
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2) /* DMA Destination Address Register 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
-
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4) /* DMA Chained Count Register 1 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 1 */
-#endif
-#endif
-
-#ifdef DCRN_DMA2_BASE
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
-#endif
-#endif
-
-#ifdef DCRN_DMA3_BASE
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
-#endif
-#endif
-
-#ifdef DCRN_DMASR_BASE
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-/* don't know if these two registers always exist if scatter/gather exists */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#endif
-#endif
-
-#ifdef DCRN_EBC_BASE
-#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
-#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
-#endif
-
-#ifdef DCRN_EXIER_BASE
-#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
-#endif
-
-#ifdef DCRN_EBIMC_BASE
-#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
-#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
-#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
-#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
-#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
-#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
-#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
-#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
-#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10)/* BRC 0 */
-#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11)/* BRC 1 */
-#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12)/* BRC 2 */
-#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13)/* BRC 3 */
-#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14)/* BRC 4 */
-#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15)/* BRC 5 */
-#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16)/* BRC 6 */
-#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17)/* BRC 7 */
-#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20)/* Bus Error Address Register */
-#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21)/* Bus Error Status Register */
-#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A)/* Bus Interfac Unit Ctrl Reg */
-#endif
-
-#ifdef DCRN_EXISR_BASE
-#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
-#endif
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-
-#ifdef DCRN_IOCR_BASE
-#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
-#endif
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
-
-#ifdef DCRN_MAL_BASE
-#define DCRN_MALCR (DCRN_MAL_BASE + 0x0) /* MAL Configuration */
-#define DCRN_MALDBR (DCRN_MAL_BASE + 0x3) /* Debug Register */
-#define DCRN_MALESR (DCRN_MAL_BASE + 0x1) /* Error Status */
-#define DCRN_MALIER (DCRN_MAL_BASE + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCARR (DCRN_MAL_BASE + 0x5) /* TX Channed Active Reset Register */
-#define DCRN_MALTXCASR (DCRN_MAL_BASE + 0x4) /* TX Channel Active Set Register */
-#define DCRN_MALTXDEIR (DCRN_MAL_BASE + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALTXEOBISR (DCRN_MAL_BASE + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALRXCARR (DCRN_MAL_BASE + 0x11) /* RX Channed Active Reset Register */
-#define DCRN_MALRXCASR (DCRN_MAL_BASE + 0x10) /* RX Channel Active Set Register */
-#define DCRN_MALRXDEIR (DCRN_MAL_BASE + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALRXEOBISR (DCRN_MAL_BASE + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXCTP0R (DCRN_MAL_BASE + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP0R (DCRN_MAL_BASE + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R (DCRN_MAL_BASE + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALRCBS0 (DCRN_MAL_BASE + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#endif
-/* DCRN_MALCR */
-#define MALCR_MMSR 0x80000000/* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#ifdef DCRN_PLB0_BASE
-#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
-#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
-#endif
-
-#ifdef DCRN_PLB1_BASE
-#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
-#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
-#endif
-
-#ifdef DCRN_PLLMR_BASE
-#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
-#endif
-
-#ifdef DCRN_POB0_BASE
-#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
-#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
-#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
-#endif
-
-#ifdef DCRN_SCCR_BASE
-#define DCRN_SCCR (DCRN_SCCR_BASE + 0x0)
-#endif
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Mem Ctrlr Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Mem Ctrlr Data */
-#endif
-
-#ifdef DCRN_UIC0_BASE
-#define DCRN_UIC0_SR (DCRN_UIC0_BASE + 0x0)
-#define DCRN_UIC0_ER (DCRN_UIC0_BASE + 0x2)
-#define DCRN_UIC0_CR (DCRN_UIC0_BASE + 0x3)
-#define DCRN_UIC0_PR (DCRN_UIC0_BASE + 0x4)
-#define DCRN_UIC0_TR (DCRN_UIC0_BASE + 0x5)
-#define DCRN_UIC0_MSR (DCRN_UIC0_BASE + 0x6)
-#define DCRN_UIC0_VR (DCRN_UIC0_BASE + 0x7)
-#define DCRN_UIC0_VCR (DCRN_UIC0_BASE + 0x8)
-#endif
-
-#ifdef DCRN_UIC1_BASE
-#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0)
-#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1)
-#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2)
-#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3)
-#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4)
-#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5)
-#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6)
-#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7)
-#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8)
-#endif
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
-#endif
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#endif /* __ASM_IBM403_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm405.h b/include/asm-ppc/ibm405.h
deleted file mode 100644
index 4e5be9e2c15..00000000000
--- a/include/asm-ppc/ibm405.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405_H__
-#define __ASM_IBM405_H__
-
-#ifdef DCRN_BE_BASE
-#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
-#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
-#endif
-/* DCRN_BESR */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-
-/* Clock and power management shifts for emacs */
-#define IBM_CPM_EMMII 0 /* Shift value for MII */
-#define IBM_CPM_EMRX 1 /* Shift value for recv */
-#define IBM_CPM_EMTX 2 /* Shift value for MAC */
-
-#ifdef DCRN_CHCR_BASE
-#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
-#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
-#endif
-#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
-
-#ifdef DCRN_CHPSR_BASE
-#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
-#endif
-
-#ifdef DCRN_CPMFR_BASE
-#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
-#endif
-
-#ifdef DCRN_CPMSR_BASE
-#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
-#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
-#endif
-
-#ifdef DCRN_DCP0_BASE
-/* Decompression Controller Address */
-#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0)
-/* Decompression Controller Data */
-#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1)
-#else
-#define DCRN_DCP0_CFGADDR 0x0
-#define DCRN_DCP0_CFGDATA 0x0
-#endif
-
-#ifdef DCRN_DMA0_BASE
-/* DMA Channel Control Register 0 */
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0)
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
-/* DMA Destination Address Register 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2)
-/* DMA Source Address Register 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3)
-#ifdef DCRNCAP_DMA_CC
-/* DMA Chained Count Register 0 */
-#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4)
-#endif
-#ifdef DCRNCAP_DMA_SG
-/* DMA Scatter/Gather Descriptor Addr 0 */
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4)
-#endif
-#endif
-
-#ifdef DCRN_DMA1_BASE
-/* DMA Channel Control Register 1 */
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0)
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
-/* DMA Destination Address Register 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2)
-/* DMA Source Address Register 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
-#ifdef DCRNCAP_DMA_CC
-/* DMA Chained Count Register 1 */
-#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4)
-#endif
-#ifdef DCRNCAP_DMA_SG
-/* DMA Scatter/Gather Descriptor Addr 1 */
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4)
-#endif
-#endif
-
-#ifdef DCRN_DMA2_BASE
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
-#endif
-#endif
-
-#ifdef DCRN_DMA3_BASE
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
-#endif
-#endif
-
-#ifdef DCRN_DMASR_BASE
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-/* don't know if these two registers always exist if scatter/gather exists */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#endif
-#endif
-
-#ifdef DCRN_EBC_BASE
-#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
-#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
-#endif
-
-#ifdef DCRN_EXIER_BASE
-#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
-#endif
-
-#ifdef DCRN_EXISR_BASE
-#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
-#endif
-
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-
-#ifdef DCRN_IOCR_BASE
-#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
-#endif
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
-
-#define DCRN_MALCR(base) (base + 0x0) /* MAL Configuration */
-#define DCRN_MALDBR(base) ((base) + 0x3) /* Debug Register */
-#define DCRN_MALESR(base) ((base) + 0x1) /* Error Status */
-#define DCRN_MALIER(base) ((base) + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCARR(base) ((base) + 0x5) /* TX Channed Active Reset Register */
-#define DCRN_MALTXCASR(base) ((base) + 0x4) /* TX Channel Active Set Register */
-#define DCRN_MALTXDEIR(base) ((base) + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALTXEOBISR(base) ((base) + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALRXCARR(base) ((base) + 0x11) /* RX Channed Active Reset Register */
-#define DCRN_MALRXCASR(base) ((base) + 0x10) /* RX Channel Active Set Register */
-#define DCRN_MALRXDEIR(base) ((base) + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALRXEOBISR(base) ((base) + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXCTP0R(base) ((base) + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALRXCTP1R(base) ((base) + 0x41) /* Channel Rx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP0R(base) ((base) + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R(base) ((base) + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP2R(base) ((base) + 0x22) /* Channel Tx 2 Channel Table Pointer */
-#define DCRN_MALTXCTP3R(base) ((base) + 0x23) /* Channel Tx 3 Channel Table Pointer */
-#define DCRN_MALRCBS0(base) ((base) + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#define DCRN_MALRCBS1(base) ((base) + 0x61) /* Channel Rx 1 Channel Buffer Size */
-
- /* DCRN_MALCR */
-#define MALCR_MMSR 0x80000000 /* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#ifdef DCRN_PLB0_BASE
-#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
-#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
-#endif
-
-#ifdef DCRN_PLB1_BASE
-#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
-#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
-#endif
-
-#ifdef DCRN_PLLMR_BASE
-#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
-#endif
-
-#ifdef DCRN_POB0_BASE
-#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
-#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
-#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
-#endif
-
-#define DCRN_UIC_SR(base) (base + 0x0)
-#define DCRN_UIC_ER(base) (base + 0x2)
-#define DCRN_UIC_CR(base) (base + 0x3)
-#define DCRN_UIC_PR(base) (base + 0x4)
-#define DCRN_UIC_TR(base) (base + 0x5)
-#define DCRN_UIC_MSR(base) (base + 0x6)
-#define DCRN_UIC_VR(base) (base + 0x7)
-#define DCRN_UIC_VCR(base) (base + 0x8)
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
-#endif
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#endif /* __ASM_IBM405_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
deleted file mode 100644
index 7818b54b6e3..00000000000
--- a/include/asm-ppc/ibm44x.h
+++ /dev/null
@@ -1,674 +0,0 @@
-/*
- * include/asm-ppc/ibm44x.h
- *
- * PPC44x definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM44x_H__
-#define __ASM_IBM44x_H__
-
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#define _IO_BASE isa_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-
-/* TLB entry offset/size used for pinning kernel lowmem */
-#define PPC44x_PIN_SHIFT 28
-#define PPC_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
-
-/* Lowest TLB slot consumed by the default pinned TLBs */
-#define PPC44x_LOW_SLOT 63
-
-/*
- * Least significant 32-bits and extended real page number (ERPN) of
- * UART0 physical address location for early serial text debug
- */
-#if defined(CONFIG_440SP)
-#define UART0_PHYS_ERPN 1
-#define UART0_PHYS_IO_BASE 0xf0000200
-#elif defined(CONFIG_440SPE)
-#define UART0_PHYS_ERPN 4
-#define UART0_PHYS_IO_BASE 0xf0000200
-#elif defined(CONFIG_440EP)
-#define UART0_PHYS_IO_BASE 0xe0000000
-#else
-#define UART0_PHYS_ERPN 1
-#define UART0_PHYS_IO_BASE 0x40000200
-#endif
-
-/*
- * XXX This 36-bit trap stuff will move somewhere in syslib/
- * when we rework/abstract the PPC44x PCI-X handling -mdp
- */
-
-/*
- * Standard 4GB "page" definitions
- */
-#if defined(CONFIG_440SP)
-#define PPC44x_IO_PAGE 0x0000000100000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL
-#elif defined(CONFIG_440SPE)
-#define PPC44x_IO_PAGE 0x0000000400000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000c00000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000d00000000ULL
-#elif defined(CONFIG_440EP)
-#define PPC44x_IO_PAGE 0x0000000000000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000000000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000000000000ULL
-#else
-#define PPC44x_IO_PAGE 0x0000000100000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000300000000ULL
-#endif
-
-/*
- * 36-bit trap ranges
- */
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define PPC44x_IO_LO 0xf0000000UL
-#define PPC44x_IO_HI 0xf0000fffUL
-#define PPC44x_PCI0CFG_LO 0x0ec00000UL
-#define PPC44x_PCI0CFG_HI 0x0ec00007UL
-#define PPC44x_PCI1CFG_LO 0x1ec00000UL
-#define PPC44x_PCI1CFG_HI 0x1ec00007UL
-#define PPC44x_PCI2CFG_LO 0x2ec00000UL
-#define PPC44x_PCI2CFG_HI 0x2ec00007UL
-#define PPC44x_PCIMEM_LO 0x80000000UL
-#define PPC44x_PCIMEM_HI 0xdfffffffUL
-#elif defined(CONFIG_440EP)
-#define PPC44x_IO_LO 0xef500000UL
-#define PPC44x_IO_HI 0xefffffffUL
-#define PPC44x_PCI0CFG_LO 0xeec00000UL
-#define PPC44x_PCI0CFG_HI 0xeecfffffUL
-#define PPC44x_PCIMEM_LO 0xa0000000UL
-#define PPC44x_PCIMEM_HI 0xdfffffffUL
-#else
-#define PPC44x_IO_LO 0x40000000UL
-#define PPC44x_IO_HI 0x40000fffUL
-#define PPC44x_PCI0CFG_LO 0x0ec00000UL
-#define PPC44x_PCI0CFG_HI 0x0ec00007UL
-#define PPC44x_PCIMEM_LO 0x80002000UL
-#define PPC44x_PCIMEM_HI 0xffffffffUL
-#endif
-
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-#ifndef __ASSEMBLY__
-
-/*
- * DCRN definitions
- */
-
-
-/* CPRs (440GX and 440SP/440SPe) */
-#define DCRN_CPR_CONFIG_ADDR 0xc
-#define DCRN_CPR_CONFIG_DATA 0xd
-
-#define DCRN_CPR_CLKUPD 0x0020
-#define DCRN_CPR_PLLC 0x0040
-#define DCRN_CPR_PLLD 0x0060
-#define DCRN_CPR_PRIMAD 0x0080
-#define DCRN_CPR_PRIMBD 0x00a0
-#define DCRN_CPR_OPBD 0x00c0
-#define DCRN_CPR_PERD 0x00e0
-#define DCRN_CPR_MALD 0x0100
-
-/* CPRs read/write helper macros */
-#define CPR_READ(offset) ({\
- mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
- mfdcr(DCRN_CPR_CONFIG_DATA);})
-#define CPR_WRITE(offset, data) ({\
- mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
- mtdcr(DCRN_CPR_CONFIG_DATA, data);})
-
-/* SDRs (440GX and 440SP/440SPe) */
-#define DCRN_SDR_CONFIG_ADDR 0xe
-#define DCRN_SDR_CONFIG_DATA 0xf
-#define DCRN_SDR_PFC0 0x4100
-#define DCRN_SDR_PFC1 0x4101
-#define DCRN_SDR_PFC1_EPS 0x1c00000
-#define DCRN_SDR_PFC1_EPS_SHIFT 22
-#define DCRN_SDR_PFC1_RMII 0x02000000
-#define DCRN_SDR_MFR 0x4300
-#define DCRN_SDR_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
-#define DCRN_SDR_MFR_TAH1 0x40000000 /* TAHOE1 Enable */
-#define DCRN_SDR_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */
-#define DCRN_SDR_MFR_ECS 0x08000000 /* EMAC int clk */
-#define DCRN_SDR_MFR_T0TXFL 0x00080000
-#define DCRN_SDR_MFR_T0TXFH 0x00040000
-#define DCRN_SDR_MFR_T1TXFL 0x00020000
-#define DCRN_SDR_MFR_T1TXFH 0x00010000
-#define DCRN_SDR_MFR_E0TXFL 0x00008000
-#define DCRN_SDR_MFR_E0TXFH 0x00004000
-#define DCRN_SDR_MFR_E0RXFL 0x00002000
-#define DCRN_SDR_MFR_E0RXFH 0x00001000
-#define DCRN_SDR_MFR_E1TXFL 0x00000800
-#define DCRN_SDR_MFR_E1TXFH 0x00000400
-#define DCRN_SDR_MFR_E1RXFL 0x00000200
-#define DCRN_SDR_MFR_E1RXFH 0x00000100
-#define DCRN_SDR_MFR_E2TXFL 0x00000080
-#define DCRN_SDR_MFR_E2TXFH 0x00000040
-#define DCRN_SDR_MFR_E2RXFL 0x00000020
-#define DCRN_SDR_MFR_E2RXFH 0x00000010
-#define DCRN_SDR_MFR_E3TXFL 0x00000008
-#define DCRN_SDR_MFR_E3TXFH 0x00000004
-#define DCRN_SDR_MFR_E3RXFL 0x00000002
-#define DCRN_SDR_MFR_E3RXFH 0x00000001
-#define DCRN_SDR_UART0 0x0120
-#define DCRN_SDR_UART1 0x0121
-
-#ifdef CONFIG_440EP
-#define DCRN_SDR_UART2 0x0122
-#define DCRN_SDR_UART3 0x0123
-#define DCRN_SDR_CUST0 0x4000
-#endif
-
-/* SDR read/write helper macros */
-#define SDR_READ(offset) ({\
- mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
- mfdcr(DCRN_SDR_CONFIG_DATA);})
-#define SDR_WRITE(offset, data) ({\
- mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
- mtdcr(DCRN_SDR_CONFIG_DATA,data);})
-
-/* DMA (excluding 440SP/440SPe) */
-#define DCRN_DMA0_BASE 0x100
-#define DCRN_DMA1_BASE 0x108
-#define DCRN_DMA2_BASE 0x110
-#define DCRN_DMA3_BASE 0x118
-#define DCRN_DMASR_BASE 0x120
-#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
-#define DCRN_MAL_BASE 0x180
-
-#ifdef CONFIG_440EP
-#define DCRN_DMA2P40_BASE 0x300
-#define DCRN_DMA2P41_BASE 0x308
-#define DCRN_DMA2P42_BASE 0x310
-#define DCRN_DMA2P43_BASE 0x318
-#define DCRN_DMA2P4SR_BASE 0x320
-#endif
-
-/* UIC */
-#define DCRN_UIC0_BASE 0xc0
-#define DCRN_UIC1_BASE 0xd0
-#define UIC0 DCRN_UIC0_BASE
-#define UIC1 DCRN_UIC1_BASE
-
-#ifdef CONFIG_440SPE
-#define DCRN_UIC2_BASE 0xe0
-#define DCRN_UIC3_BASE 0xf0
-#define UIC2 DCRN_UIC2_BASE
-#define UIC3 DCRN_UIC3_BASE
-#else
-#define DCRN_UIC2_BASE 0x210
-#define DCRN_UICB_BASE 0x200
-#define UIC2 DCRN_UIC2_BASE
-#define UICB DCRN_UICB_BASE
-#endif
-
-#define DCRN_UIC_SR(base) (base + 0x0)
-#define DCRN_UIC_ER(base) (base + 0x2)
-#define DCRN_UIC_CR(base) (base + 0x3)
-#define DCRN_UIC_PR(base) (base + 0x4)
-#define DCRN_UIC_TR(base) (base + 0x5)
-#define DCRN_UIC_MSR(base) (base + 0x6)
-#define DCRN_UIC_VR(base) (base + 0x7)
-#define DCRN_UIC_VCR(base) (base + 0x8)
-
-#define UIC0_UIC1NC 0x00000002
-
-#ifdef CONFIG_440SPE
-#define UIC0_UIC1NC 0x00000002
-#define UIC0_UIC2NC 0x00200000
-#define UIC0_UIC3NC 0x00008000
-#endif
-
-#define UICB_UIC0NC 0x40000000
-#define UICB_UIC1NC 0x10000000
-#define UICB_UIC2NC 0x04000000
-
-/* 440 MAL DCRs */
-#define DCRN_MALCR(base) (base + 0x0) /* Configuration */
-#define DCRN_MALESR(base) (base + 0x1) /* Error Status */
-#define DCRN_MALIER(base) (base + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCASR(base) (base + 0x4) /* Tx Channel Active Set */
-#define DCRN_MALTXCARR(base) (base + 0x5) /* Tx Channel Active Reset */
-#define DCRN_MALTXEOBISR(base) (base + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALTXDEIR(base) (base + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALRXCASR(base) (base + 0x10) /* Rx Channel Active Set */
-#define DCRN_MALRXCARR(base) (base + 0x11) /* Rx Channel Active Reset */
-#define DCRN_MALRXEOBISR(base) (base + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXDEIR(base) (base + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALTXCTP0R(base) (base + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R(base) (base + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP2R(base) (base + 0x22) /* Channel Tx 2 Channel Table Pointer */
-#define DCRN_MALTXCTP3R(base) (base + 0x23) /* Channel Tx 3 Channel Table Pointer */
-#define DCRN_MALRXCTP0R(base) (base + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALRXCTP1R(base) (base + 0x41) /* Channel Rx 1 Channel Table Pointer */
-#define DCRN_MALRCBS0(base) (base + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#define DCRN_MALRCBS1(base) (base + 0x61) /* Channel Rx 1 Channel Buffer Size */
-
-/* Compatibility DCRN's */
-#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
-
-#define MALCR_MMSR 0x80000000 /* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#ifdef CONFIG_440GP
-#define MALCR_PLBLT_DEFAULT 0x00330000 /* PLB Latency Timer default */
-#else
-#define MALCR_PLBLT_DEFAULT 0x00ff0000 /* PLB Latency Timer default */
-#endif
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/* 440SP/440SPe PLB Arbiter DCRs */
-#define DCRN_PLB_REVID 0x080 /* PLB Revision ID */
-#define DCRN_PLB_CCR 0x088 /* PLB Crossbar Control */
-
-#define DCRN_PLB0_ACR 0x081 /* PLB Arbiter Control */
-#define DCRN_PLB0_BESRL 0x082 /* PLB Error Status */
-#define DCRN_PLB0_BESRH 0x083 /* PLB Error Status */
-#define DCRN_PLB0_BEARL 0x084 /* PLB Error Address Low */
-#define DCRN_PLB0_BEARH 0x085 /* PLB Error Address High */
-
-#define DCRN_PLB1_ACR 0x089 /* PLB Arbiter Control */
-#define DCRN_PLB1_BESRL 0x08a /* PLB Error Status */
-#define DCRN_PLB1_BESRH 0x08b /* PLB Error Status */
-#define DCRN_PLB1_BEARL 0x08c /* PLB Error Address Low */
-#define DCRN_PLB1_BEARH 0x08d /* PLB Error Address High */
-#else
-/* 440GP/GX PLB Arbiter DCRs */
-#define DCRN_PLB0_REVID 0x082 /* PLB Arbiter Revision ID */
-#define DCRN_PLB0_ACR 0x083 /* PLB Arbiter Control */
-#define DCRN_PLB0_BESR 0x084 /* PLB Error Status */
-#define DCRN_PLB0_BEARL 0x086 /* PLB Error Address Low */
-#define DCRN_PLB0_BEAR DCRN_PLB0_BEARL /* 40x compatibility */
-#define DCRN_PLB0_BEARH 0x087 /* PLB Error Address High */
-#endif
-
-/* 440GP/GX PLB to OPB bridge DCRs */
-#define DCRN_POB0_BESR0 0x090
-#define DCRN_POB0_BESR1 0x094
-#define DCRN_POB0_BEARL 0x092
-#define DCRN_POB0_BEARH 0x093
-
-/* 440GP/GX OPB to PLB bridge DCRs */
-#define DCRN_OPB0_BSTAT 0x0a9
-#define DCRN_OPB0_BEARL 0x0aa
-#define DCRN_OPB0_BEARH 0x0ab
-
-/* 440GP Clock, PM, chip control */
-#define DCRN_CPC0_SR 0x0b0
-#define DCRN_CPC0_ER 0x0b1
-#define DCRN_CPC0_FR 0x0b2
-#define DCRN_CPC0_SYS0 0x0e0
-#define DCRN_CPC0_SYS1 0x0e1
-#define DCRN_CPC0_CUST0 0x0e2
-#define DCRN_CPC0_CUST1 0x0e3
-#define DCRN_CPC0_STRP0 0x0e4
-#define DCRN_CPC0_STRP1 0x0e5
-#define DCRN_CPC0_STRP2 0x0e6
-#define DCRN_CPC0_STRP3 0x0e7
-#define DCRN_CPC0_GPIO 0x0e8
-#define DCRN_CPC0_PLB 0x0e9
-#define DCRN_CPC0_CR1 0x0ea
-#define DCRN_CPC0_CR0 0x0eb
-#define DCRN_CPC0_MIRQ0 0x0ec
-#define DCRN_CPC0_MIRQ1 0x0ed
-#define DCRN_CPC0_JTAGID 0x0ef
-
-/* 440GP DMA controller DCRs */
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */
-#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */
-#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */
-#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */
-
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control 1 */
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count 1 */
-#define DCRN_DMASAH1 (DCRN_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */
-#define DCRN_DMADAH1 (DCRN_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */
-#define DCRN_ASGH1 (DCRN_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */
-
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count 2 */
-#define DCRN_DMASAH2 (DCRN_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */
-#define DCRN_DMADAH2 (DCRN_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */
-#define DCRN_ASGH2 (DCRN_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */
-
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count 3 */
-#define DCRN_DMASAH3 (DCRN_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */
-#define DCRN_DMADAH3 (DCRN_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */
-#define DCRN_ASGH3 (DCRN_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */
-
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-
-/* 440GP/440GX SDRAM controller DCRs */
-#define DCRN_SDRAM0_CFGADDR 0x010
-#define DCRN_SDRAM0_CFGDATA 0x011
-
-#define SDRAM0_B0CR 0x40
-#define SDRAM0_B1CR 0x44
-#define SDRAM0_B2CR 0x48
-#define SDRAM0_B3CR 0x4c
-
-#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
-#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
-#define SDRAM_CONFIG_BANK_SIZE(reg) ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)
-#define SDRAM_CONFIG_SIZE_8M 0x00000001
-#define SDRAM_CONFIG_SIZE_16M 0x00000002
-#define SDRAM_CONFIG_SIZE_32M 0x00000003
-#define SDRAM_CONFIG_SIZE_64M 0x00000004
-#define SDRAM_CONFIG_SIZE_128M 0x00000005
-#define SDRAM_CONFIG_SIZE_256M 0x00000006
-#define SDRAM_CONFIG_SIZE_512M 0x00000007
-#define PPC44x_MEM_SIZE_8M 0x00800000
-#define PPC44x_MEM_SIZE_16M 0x01000000
-#define PPC44x_MEM_SIZE_32M 0x02000000
-#define PPC44x_MEM_SIZE_64M 0x04000000
-#define PPC44x_MEM_SIZE_128M 0x08000000
-#define PPC44x_MEM_SIZE_256M 0x10000000
-#define PPC44x_MEM_SIZE_512M 0x20000000
-#define PPC44x_MEM_SIZE_1G 0x40000000
-#define PPC44x_MEM_SIZE_2G 0x80000000
-
-/* 440SP/440SPe memory controller DCRs */
-#define DCRN_MQ0_BS0BAS 0x40
-#if defined(CONFIG_440SP)
-#define MQ0_NUM_BANKS 2
-#elif defined(CONFIG_440SPE)
-#define MQ0_NUM_BANKS 4
-#endif
-
-#define MQ0_CONFIG_SIZE_MASK 0x0000fff0
-#define MQ0_CONFIG_SIZE_8M 0x0000ffc0
-#define MQ0_CONFIG_SIZE_16M 0x0000ff80
-#define MQ0_CONFIG_SIZE_32M 0x0000ff00
-#define MQ0_CONFIG_SIZE_64M 0x0000fe00
-#define MQ0_CONFIG_SIZE_128M 0x0000fc00
-#define MQ0_CONFIG_SIZE_256M 0x0000f800
-#define MQ0_CONFIG_SIZE_512M 0x0000f000
-#define MQ0_CONFIG_SIZE_1G 0x0000e000
-#define MQ0_CONFIG_SIZE_2G 0x0000c000
-#define MQ0_CONFIG_SIZE_4G 0x00008000
-
-/* Internal SRAM Controller 440GX/440SP/440SPe */
-#define DCRN_SRAM0_BASE 0x000
-
-#define DCRN_SRAM0_SB0CR (DCRN_SRAM0_BASE + 0x020)
-#define DCRN_SRAM0_SB1CR (DCRN_SRAM0_BASE + 0x021)
-#define DCRN_SRAM0_SB2CR (DCRN_SRAM0_BASE + 0x022)
-#define DCRN_SRAM0_SB3CR (DCRN_SRAM0_BASE + 0x023)
-#define SRAM_SBCR_BAS0 0x80000000
-#define SRAM_SBCR_BAS1 0x80010000
-#define SRAM_SBCR_BAS2 0x80020000
-#define SRAM_SBCR_BAS3 0x80030000
-#define SRAM_SBCR_BU_MASK 0x00000180
-#define SRAM_SBCR_BS_64KB 0x00000800
-#define SRAM_SBCR_BU_RO 0x00000080
-#define SRAM_SBCR_BU_RW 0x00000180
-#define DCRN_SRAM0_BEAR (DCRN_SRAM0_BASE + 0x024)
-#define DCRN_SRAM0_BESR0 (DCRN_SRAM0_BASE + 0x025)
-#define DCRN_SRAM0_BESR1 (DCRN_SRAM0_BASE + 0x026)
-#define DCRN_SRAM0_PMEG (DCRN_SRAM0_BASE + 0x027)
-#define DCRN_SRAM0_CID (DCRN_SRAM0_BASE + 0x028)
-#define DCRN_SRAM0_REVID (DCRN_SRAM0_BASE + 0x029)
-#define DCRN_SRAM0_DPC (DCRN_SRAM0_BASE + 0x02a)
-#define SRAM_DPC_ENABLE 0x80000000
-
-/* L2 Cache Controller 440GX/440SP/440SPe */
-#define DCRN_L2C0_CFG 0x030
-#define L2C_CFG_L2M 0x80000000
-#define L2C_CFG_ICU 0x40000000
-#define L2C_CFG_DCU 0x20000000
-#define L2C_CFG_DCW_MASK 0x1e000000
-#define L2C_CFG_TPC 0x01000000
-#define L2C_CFG_CPC 0x00800000
-#define L2C_CFG_FRAN 0x00200000
-#define L2C_CFG_SS_MASK 0x00180000
-#define L2C_CFG_SS_256 0x00000000
-#define L2C_CFG_CPIM 0x00040000
-#define L2C_CFG_TPIM 0x00020000
-#define L2C_CFG_LIM 0x00010000
-#define L2C_CFG_PMUX_MASK 0x00007000
-#define L2C_CFG_PMUX_SNP 0x00000000
-#define L2C_CFG_PMUX_IF 0x00001000
-#define L2C_CFG_PMUX_DF 0x00002000
-#define L2C_CFG_PMUX_DS 0x00003000
-#define L2C_CFG_PMIM 0x00000800
-#define L2C_CFG_TPEI 0x00000400
-#define L2C_CFG_CPEI 0x00000200
-#define L2C_CFG_NAM 0x00000100
-#define L2C_CFG_SMCM 0x00000080
-#define L2C_CFG_NBRM 0x00000040
-#define DCRN_L2C0_CMD 0x031
-#define L2C_CMD_CLR 0x80000000
-#define L2C_CMD_DIAG 0x40000000
-#define L2C_CMD_INV 0x20000000
-#define L2C_CMD_CCP 0x10000000
-#define L2C_CMD_CTE 0x08000000
-#define L2C_CMD_STRC 0x04000000
-#define L2C_CMD_STPC 0x02000000
-#define L2C_CMD_RPMC 0x01000000
-#define L2C_CMD_HCC 0x00800000
-#define DCRN_L2C0_ADDR 0x032
-#define DCRN_L2C0_DATA 0x033
-#define DCRN_L2C0_SR 0x034
-#define L2C_SR_CC 0x80000000
-#define L2C_SR_CPE 0x40000000
-#define L2C_SR_TPE 0x20000000
-#define L2C_SR_LRU 0x10000000
-#define L2C_SR_PCS 0x08000000
-#define DCRN_L2C0_REVID 0x035
-#define DCRN_L2C0_SNP0 0x036
-#define DCRN_L2C0_SNP1 0x037
-#define L2C_SNP_BA_MASK 0xffff0000
-#define L2C_SNP_SSR_MASK 0x0000f000
-#define L2C_SNP_SSR_32G 0x0000f000
-#define L2C_SNP_ESR 0x00000800
-
-/*
- * PCI-X definitions
- */
-#define PCIX0_CFGA 0x0ec00000UL
-#define PCIX1_CFGA 0x1ec00000UL
-#define PCIX2_CFGA 0x2ec00000UL
-#define PCIX0_CFGD 0x0ec00004UL
-#define PCIX1_CFGD 0x1ec00004UL
-#define PCIX2_CFGD 0x2ec00004UL
-
-#define PCIX0_IO_BASE 0x0000000908000000ULL
-#define PCIX1_IO_BASE 0x0000000908000000ULL
-#define PCIX2_IO_BASE 0x0000000908000000ULL
-#define PCIX_IO_SIZE 0x00010000
-
-#ifdef CONFIG_440SP
-#define PCIX0_REG_BASE 0x000000090ec80000ULL
-#else
-#define PCIX0_REG_BASE 0x000000020ec80000ULL
-#endif
-#define PCIX_REG_OFFSET 0x10000000
-#define PCIX_REG_SIZE 0x200
-
-#define PCIX0_VENDID 0x000
-#define PCIX0_DEVID 0x002
-#define PCIX0_COMMAND 0x004
-#define PCIX0_STATUS 0x006
-#define PCIX0_REVID 0x008
-#define PCIX0_CLS 0x009
-#define PCIX0_CACHELS 0x00c
-#define PCIX0_LATTIM 0x00d
-#define PCIX0_HDTYPE 0x00e
-#define PCIX0_BIST 0x00f
-#define PCIX0_BAR0L 0x010
-#define PCIX0_BAR0H 0x014
-#define PCIX0_BAR1 0x018
-#define PCIX0_BAR2L 0x01c
-#define PCIX0_BAR2H 0x020
-#define PCIX0_BAR3 0x024
-#define PCIX0_CISPTR 0x028
-#define PCIX0_SBSYSVID 0x02c
-#define PCIX0_SBSYSID 0x02e
-#define PCIX0_EROMBA 0x030
-#define PCIX0_CAP 0x034
-#define PCIX0_RES0 0x035
-#define PCIX0_RES1 0x036
-#define PCIX0_RES2 0x038
-#define PCIX0_INTLN 0x03c
-#define PCIX0_INTPN 0x03d
-#define PCIX0_MINGNT 0x03e
-#define PCIX0_MAXLTNCY 0x03f
-#define PCIX0_BRDGOPT1 0x040
-#define PCIX0_BRDGOPT2 0x044
-#define PCIX0_ERREN 0x050
-#define PCIX0_ERRSTS 0x054
-#define PCIX0_PLBBESR 0x058
-#define PCIX0_PLBBEARL 0x05c
-#define PCIX0_PLBBEARH 0x060
-#define PCIX0_POM0LAL 0x068
-#define PCIX0_POM0LAH 0x06c
-#define PCIX0_POM0SA 0x070
-#define PCIX0_POM0PCIAL 0x074
-#define PCIX0_POM0PCIAH 0x078
-#define PCIX0_POM1LAL 0x07c
-#define PCIX0_POM1LAH 0x080
-#define PCIX0_POM1SA 0x084
-#define PCIX0_POM1PCIAL 0x088
-#define PCIX0_POM1PCIAH 0x08c
-#define PCIX0_POM2SA 0x090
-#define PCIX0_PIM0SAL 0x098
-#define PCIX0_PIM0SA PCIX0_PIM0SAL
-#define PCIX0_PIM0LAL 0x09c
-#define PCIX0_PIM0LAH 0x0a0
-#define PCIX0_PIM1SA 0x0a4
-#define PCIX0_PIM1LAL 0x0a8
-#define PCIX0_PIM1LAH 0x0ac
-#define PCIX0_PIM2SAL 0x0b0
-#define PCIX0_PIM2SA PCIX0_PIM2SAL
-#define PCIX0_PIM2LAL 0x0b4
-#define PCIX0_PIM2LAH 0x0b8
-#define PCIX0_OMCAPID 0x0c0
-#define PCIX0_OMNIPTR 0x0c1
-#define PCIX0_OMMC 0x0c2
-#define PCIX0_OMMA 0x0c4
-#define PCIX0_OMMUA 0x0c8
-#define PCIX0_OMMDATA 0x0cc
-#define PCIX0_OMMEOI 0x0ce
-#define PCIX0_PMCAPID 0x0d0
-#define PCIX0_PMNIPTR 0x0d1
-#define PCIX0_PMC 0x0d2
-#define PCIX0_PMCSR 0x0d4
-#define PCIX0_PMCSRBSE 0x0d6
-#define PCIX0_PMDATA 0x0d7
-#define PCIX0_PMSCRR 0x0d8
-#define PCIX0_CAPID 0x0dc
-#define PCIX0_NIPTR 0x0dd
-#define PCIX0_CMD 0x0de
-#define PCIX0_STS 0x0e0
-#define PCIX0_IDR 0x0e4
-#define PCIX0_CID 0x0e8
-#define PCIX0_RID 0x0ec
-#define PCIX0_PIM0SAH 0x0f8
-#define PCIX0_PIM2SAH 0x0fc
-#define PCIX0_MSGIL 0x100
-#define PCIX0_MSGIH 0x104
-#define PCIX0_MSGOL 0x108
-#define PCIX0_MSGOH 0x10c
-#define PCIX0_IM 0x1f8
-
-#define IIC_OWN 0x55
-#define IIC_CLOCK 50
-
-#undef NR_UICS
-#if defined(CONFIG_440GX)
-#define NR_UICS 3
-#elif defined(CONFIG_440SPE)
-#define NR_UICS 4
-#else
-#define NR_UICS 2
-#endif
-
-#include <asm/ibm4xx.h>
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_IBM44x_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
deleted file mode 100644
index ed6891af05d..00000000000
--- a/include/asm-ppc/ibm4xx.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: ibm4xx.h
- *
- * Description:
- * A generic include file which pulls in appropriate include files
- * for specific board types based on configuration settings.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM4XX_H__
-#define __ASM_IBM4XX_H__
-
-#include <asm/types.h>
-#include <asm/dcr.h>
-
-#ifdef CONFIG_40x
-
-#if defined(CONFIG_BUBINGA)
-#include <platforms/4xx/bubinga.h>
-#endif
-
-#if defined(CONFIG_CPCI405)
-#include <platforms/4xx/cpci405.h>
-#endif
-
-#if defined(CONFIG_EP405)
-#include <platforms/4xx/ep405.h>
-#endif
-
-#if defined(CONFIG_REDWOOD_5)
-#include <platforms/4xx/redwood5.h>
-#endif
-
-#if defined(CONFIG_REDWOOD_6)
-#include <platforms/4xx/redwood6.h>
-#endif
-
-#if defined(CONFIG_SYCAMORE)
-#include <platforms/4xx/sycamore.h>
-#endif
-
-#if defined(CONFIG_WALNUT)
-#include <platforms/4xx/walnut.h>
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX)
-#include <platforms/4xx/virtex.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_40x
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-extern bd_t __res;
-#endif
-
-void ppc4xx_setup_arch(void);
-void ppc4xx_map_io(void);
-void ppc4xx_init_IRQ(void);
-void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7);
-#endif
-
-#ifndef PPC4xx_MACHINE_NAME
-#define PPC4xx_MACHINE_NAME "Unidentified 4xx class"
-#endif
-
-
-/* IO_BASE is for PCI I/O.
- * ISA not supported, just here to resolve copilation.
- */
-
-#ifndef _IO_BASE
-#define _IO_BASE 0xe8000000 /* The PCI address window */
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-
-#elif defined(CONFIG_44x)
-
-#if defined(CONFIG_BAMBOO)
-#include <platforms/4xx/bamboo.h>
-#endif
-
-#if defined(CONFIG_EBONY)
-#include <platforms/4xx/ebony.h>
-#endif
-
-#if defined(CONFIG_LUAN)
-#include <platforms/4xx/luan.h>
-#endif
-
-#if defined(CONFIG_YUCCA)
-#include <platforms/4xx/yucca.h>
-#endif
-
-#if defined(CONFIG_OCOTEA)
-#include <platforms/4xx/ocotea.h>
-#endif
-
-#if defined(CONFIG_TAISHAN)
-#include <platforms/4xx/taishan.h>
-#endif
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_40x
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-extern bd_t __res;
-#endif
-#endif
-#endif /* CONFIG_40x */
-
-#endif /* __ASM_IBM4XX_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
deleted file mode 100644
index ddce616f765..00000000000
--- a/include/asm-ppc/ibm_ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ibm_ocp.h
- *
- * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- * Mipsys - France
- *
- * Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- * Additional support and port to 2.6 LDM/sysfs by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __IBM_OCP_H__
-#define __IBM_OCP_H__
-
-#include <asm/types.h>
-
-/*
- * IBM 4xx OCP system information
- */
-struct ocp_sys_info_data {
- int opb_bus_freq; /* OPB Bus Frequency (Hz) */
- int ebc_bus_freq; /* EBC Bus Frequency (Hz) */
-};
-
-extern struct ocp_sys_info_data ocp_sys_info;
-
-/*
- * EMAC additional data and sysfs support
- *
- * Note about mdio_idx: When you have a zmii, it's usually
- * not necessary, it covers the case of the 405EP which has
- * the MDIO lines on EMAC0 only
- *
- * Note about phy_map: Per EMAC map of PHY ids which should
- * be probed by emac_probe. Different EMACs can have
- * overlapping maps.
- *
- * Note, this map uses inverse logic for bits:
- * 0 - id should be probed
- * 1 - id should be ignored
- *
- * Default value of 0x00000000 - will result in usual
- * auto-detection logic.
- *
- */
-
-struct ocp_func_emac_data {
- int rgmii_idx; /* RGMII device index or -1 */
- int rgmii_mux; /* RGMII input of this EMAC */
- int zmii_idx; /* ZMII device index or -1 */
- int zmii_mux; /* ZMII input of this EMAC */
- int mal_idx; /* MAL device index */
- int mal_rx_chan; /* MAL rx channel number */
- int mal_tx_chan; /* MAL tx channel number */
- int wol_irq; /* WOL interrupt */
- int mdio_idx; /* EMAC idx of MDIO master or -1 */
- int tah_idx; /* TAH device index or -1 */
- int phy_mode; /* PHY type or configurable mode */
- u8 mac_addr[6]; /* EMAC mac address */
- u32 phy_map; /* EMAC phy map */
- u32 phy_feat_exc; /* Excluded PHY features */
-};
-
-/* Sysfs support */
-#define OCP_SYSFS_EMAC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\
- \
-void ocp_show_emac_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_emac_rgmii_idx); \
- device_create_file(dev, &dev_attr_emac_rgmii_mux); \
- device_create_file(dev, &dev_attr_emac_zmii_idx); \
- device_create_file(dev, &dev_attr_emac_zmii_mux); \
- device_create_file(dev, &dev_attr_emac_mal_idx); \
- device_create_file(dev, &dev_attr_emac_mal_rx_chan); \
- device_create_file(dev, &dev_attr_emac_mal_tx_chan); \
- device_create_file(dev, &dev_attr_emac_wol_irq); \
- device_create_file(dev, &dev_attr_emac_mdio_idx); \
- device_create_file(dev, &dev_attr_emac_tah_idx); \
- device_create_file(dev, &dev_attr_emac_phy_mode); \
- device_create_file(dev, &dev_attr_emac_phy_map); \
- device_create_file(dev, &dev_attr_emac_phy_feat_exc); \
-}
-
-/*
- * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-#ifdef CONFIG_40x
-/*
- * Helper function to copy MAC addresses from the bd_t to OCP EMAC
- * additions.
- *
- * The range of EMAC indices (inclusive) to be copied are the arguments.
- */
-static inline void ibm_ocp_set_emac(int start, int end)
-{
- int i;
- struct ocp_def *def;
-
- /* Copy MAC addresses to EMAC additions */
- for (i=start; i<=end; i++) {
- def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
- if (i == 0)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enetaddr, 6);
-#if defined(CONFIG_405EP) || defined(CONFIG_44x)
- else if (i == 1)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet1addr, 6);
-#endif
-#if defined(CONFIG_440GX)
- else if (i == 2)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet2addr, 6);
- else if (i == 3)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet3addr, 6);
-#endif
- }
-}
-#endif
-
-/*
- * MAL additional data and sysfs support
- */
-struct ocp_func_mal_data {
- int num_tx_chans; /* Number of TX channels */
- int num_rx_chans; /* Number of RX channels */
- int txeob_irq; /* TX End Of Buffer IRQ */
- int rxeob_irq; /* RX End Of Buffer IRQ */
- int txde_irq; /* TX Descriptor Error IRQ */
- int rxde_irq; /* RX Descriptor Error IRQ */
- int serr_irq; /* MAL System Error IRQ */
- int dcr_base; /* MALx_CFG DCR number */
-};
-
-#define OCP_SYSFS_MAL_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \
- \
-void ocp_show_mal_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_mal_num_tx_chans); \
- device_create_file(dev, &dev_attr_mal_num_rx_chans); \
- device_create_file(dev, &dev_attr_mal_txeob_irq); \
- device_create_file(dev, &dev_attr_mal_rxeob_irq); \
- device_create_file(dev, &dev_attr_mal_txde_irq); \
- device_create_file(dev, &dev_attr_mal_rxde_irq); \
- device_create_file(dev, &dev_attr_mal_serr_irq); \
- device_create_file(dev, &dev_attr_mal_dcr_base); \
-}
-
-/*
- * IIC additional data and sysfs support
- */
-struct ocp_func_iic_data {
- int fast_mode; /* IIC fast mode enabled */
-};
-
-#define OCP_SYSFS_IIC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \
- \
-void ocp_show_iic_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_iic_fast_mode); \
-}
-#endif /* __IBM_OCP_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp_pci.h b/include/asm-ppc/ibm_ocp_pci.h
deleted file mode 100644
index a81ab614435..00000000000
--- a/include/asm-ppc/ibm_ocp_pci.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM_OCP_PCI_H__
-#define __ASM_IBM_OCP_PCI_H__
-
-/* PCI 32 */
-
-struct pmm_regs {
- u32 la;
- u32 ma;
- u32 pcila;
- u32 pciha;
-};
-
-typedef struct pcil0_regs {
- struct pmm_regs pmm[3];
- u32 ptm1ms;
- u32 ptm1la;
- u32 ptm2ms;
- u32 ptm2la;
-} pci0_t;
-
-#endif /* __ASM_IBM_OCP_PCI_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/immap_cpm2.h b/include/asm-ppc/immap_cpm2.h
deleted file mode 100644
index 3c23d9cb47a..00000000000
--- a/include/asm-ppc/immap_cpm2.h
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * CPM2 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * The Internal Memory Map for devices with CPM2 on them. This
- * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
- * 8560).
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_CPM2__
-#define __IMMAP_CPM2__
-
-/* System configuration registers.
-*/
-typedef struct sys_82xx_conf {
- u32 sc_siumcr;
- u32 sc_sypcr;
- u8 res1[6];
- u16 sc_swsr;
- u8 res2[20];
- u32 sc_bcr;
- u8 sc_ppc_acr;
- u8 res3[3];
- u32 sc_ppc_alrh;
- u32 sc_ppc_alrl;
- u8 sc_lcl_acr;
- u8 res4[3];
- u32 sc_lcl_alrh;
- u32 sc_lcl_alrl;
- u32 sc_tescr1;
- u32 sc_tescr2;
- u32 sc_ltescr1;
- u32 sc_ltescr2;
- u32 sc_pdtea;
- u8 sc_pdtem;
- u8 res5[3];
- u32 sc_ldtea;
- u8 sc_ldtem;
- u8 res6[163];
-} sysconf_82xx_cpm2_t;
-
-typedef struct sys_85xx_conf {
- u32 sc_cear;
- u16 sc_ceer;
- u16 sc_cemr;
- u8 res1[70];
- u32 sc_smaer;
- u8 res2[4];
- u32 sc_smevr;
- u32 sc_smctr;
- u32 sc_lmaer;
- u8 res3[4];
- u32 sc_lmevr;
- u32 sc_lmctr;
- u8 res4[144];
-} sysconf_85xx_cpm2_t;
-
-typedef union sys_conf {
- sysconf_82xx_cpm2_t siu_82xx;
- sysconf_85xx_cpm2_t siu_85xx;
-} sysconf_cpm2_t;
-
-
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- u32 memc_br0;
- u32 memc_or0;
- u32 memc_br1;
- u32 memc_or1;
- u32 memc_br2;
- u32 memc_or2;
- u32 memc_br3;
- u32 memc_or3;
- u32 memc_br4;
- u32 memc_or4;
- u32 memc_br5;
- u32 memc_or5;
- u32 memc_br6;
- u32 memc_or6;
- u32 memc_br7;
- u32 memc_or7;
- u32 memc_br8;
- u32 memc_or8;
- u32 memc_br9;
- u32 memc_or9;
- u32 memc_br10;
- u32 memc_or10;
- u32 memc_br11;
- u32 memc_or11;
- u8 res1[8];
- u32 memc_mar;
- u8 res2[4];
- u32 memc_mamr;
- u32 memc_mbmr;
- u32 memc_mcmr;
- u8 res3[8];
- u16 memc_mptpr;
- u8 res4[2];
- u32 memc_mdr;
- u8 res5[4];
- u32 memc_psdmr;
- u32 memc_lsdmr;
- u8 memc_purt;
- u8 res6[3];
- u8 memc_psrt;
- u8 res7[3];
- u8 memc_lurt;
- u8 res8[3];
- u8 memc_lsrt;
- u8 res9[3];
- u32 memc_immr;
- u32 memc_pcibr0;
- u32 memc_pcibr1;
- u8 res10[16];
- u32 memc_pcimsk0;
- u32 memc_pcimsk1;
- u8 res11[52];
-} memctl_cpm2_t;
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- u8 res1[32];
- u16 sit_tmcntsc;
- u8 res2[2];
- u32 sit_tmcnt;
- u8 res3[4];
- u32 sit_tmcntal;
- u8 res4[16];
- u16 sit_piscr;
- u8 res5[2];
- u32 sit_pitc;
- u32 sit_pitr;
- u8 res6[94];
- u8 res7[390];
-} sit_cpm2_t;
-
-#define PISCR_PIRQ_MASK ((u16)0xff00)
-#define PISCR_PS ((u16)0x0080)
-#define PISCR_PIE ((u16)0x0004)
-#define PISCR_PTF ((u16)0x0002)
-#define PISCR_PTE ((u16)0x0001)
-
-/* PCI Controller.
-*/
-typedef struct pci_ctlr {
- u32 pci_omisr;
- u32 pci_omimr;
- u8 res1[8];
- u32 pci_ifqpr;
- u32 pci_ofqpr;
- u8 res2[8];
- u32 pci_imr0;
- u32 pci_imr1;
- u32 pci_omr0;
- u32 pci_omr1;
- u32 pci_odr;
- u8 res3[4];
- u32 pci_idr;
- u8 res4[20];
- u32 pci_imisr;
- u32 pci_imimr;
- u8 res5[24];
- u32 pci_ifhpr;
- u8 res6[4];
- u32 pci_iftpr;
- u8 res7[4];
- u32 pci_iphpr;
- u8 res8[4];
- u32 pci_iptpr;
- u8 res9[4];
- u32 pci_ofhpr;
- u8 res10[4];
- u32 pci_oftpr;
- u8 res11[4];
- u32 pci_ophpr;
- u8 res12[4];
- u32 pci_optpr;
- u8 res13[8];
- u32 pci_mucr;
- u8 res14[8];
- u32 pci_qbar;
- u8 res15[12];
- u32 pci_dmamr0;
- u32 pci_dmasr0;
- u32 pci_dmacdar0;
- u8 res16[4];
- u32 pci_dmasar0;
- u8 res17[4];
- u32 pci_dmadar0;
- u8 res18[4];
- u32 pci_dmabcr0;
- u32 pci_dmandar0;
- u8 res19[86];
- u32 pci_dmamr1;
- u32 pci_dmasr1;
- u32 pci_dmacdar1;
- u8 res20[4];
- u32 pci_dmasar1;
- u8 res21[4];
- u32 pci_dmadar1;
- u8 res22[4];
- u32 pci_dmabcr1;
- u32 pci_dmandar1;
- u8 res23[88];
- u32 pci_dmamr2;
- u32 pci_dmasr2;
- u32 pci_dmacdar2;
- u8 res24[4];
- u32 pci_dmasar2;
- u8 res25[4];
- u32 pci_dmadar2;
- u8 res26[4];
- u32 pci_dmabcr2;
- u32 pci_dmandar2;
- u8 res27[88];
- u32 pci_dmamr3;
- u32 pci_dmasr3;
- u32 pci_dmacdar3;
- u8 res28[4];
- u32 pci_dmasar3;
- u8 res29[4];
- u32 pci_dmadar3;
- u8 res30[4];
- u32 pci_dmabcr3;
- u32 pci_dmandar3;
- u8 res31[344];
- u32 pci_potar0;
- u8 res32[4];
- u32 pci_pobar0;
- u8 res33[4];
- u32 pci_pocmr0;
- u8 res34[4];
- u32 pci_potar1;
- u8 res35[4];
- u32 pci_pobar1;
- u8 res36[4];
- u32 pci_pocmr1;
- u8 res37[4];
- u32 pci_potar2;
- u8 res38[4];
- u32 pci_pobar2;
- u8 res39[4];
- u32 pci_pocmr2;
- u8 res40[50];
- u32 pci_ptcr;
- u32 pci_gpcr;
- u32 pci_gcr;
- u32 pci_esr;
- u32 pci_emr;
- u32 pci_ecr;
- u32 pci_eacr;
- u8 res41[4];
- u32 pci_edcr;
- u8 res42[4];
- u32 pci_eccr;
- u8 res43[44];
- u32 pci_pitar1;
- u8 res44[4];
- u32 pci_pibar1;
- u8 res45[4];
- u32 pci_picmr1;
- u8 res46[4];
- u32 pci_pitar0;
- u8 res47[4];
- u32 pci_pibar0;
- u8 res48[4];
- u32 pci_picmr0;
- u8 res49[4];
- u32 pci_cfg_addr;
- u32 pci_cfg_data;
- u32 pci_int_ack;
- u8 res50[756];
-} pci_cpm2_t;
-
-/* Interrupt Controller.
-*/
-typedef struct interrupt_controller {
- u16 ic_sicr;
- u8 res1[2];
- u32 ic_sivec;
- u32 ic_sipnrh;
- u32 ic_sipnrl;
- u32 ic_siprr;
- u32 ic_scprrh;
- u32 ic_scprrl;
- u32 ic_simrh;
- u32 ic_simrl;
- u32 ic_siexr;
- u8 res2[88];
-} intctl_cpm2_t;
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- u32 car_sccr;
- u8 res1[4];
- u32 car_scmr;
- u8 res2[4];
- u32 car_rsr;
- u32 car_rmr;
- u8 res[104];
-} car_cpm2_t;
-
-/* Input/Output Port control/status registers.
- * Names consistent with processor manual, although they are different
- * from the original 8xx names.......
- */
-typedef struct io_port {
- u32 iop_pdira;
- u32 iop_ppara;
- u32 iop_psora;
- u32 iop_podra;
- u32 iop_pdata;
- u8 res1[12];
- u32 iop_pdirb;
- u32 iop_pparb;
- u32 iop_psorb;
- u32 iop_podrb;
- u32 iop_pdatb;
- u8 res2[12];
- u32 iop_pdirc;
- u32 iop_pparc;
- u32 iop_psorc;
- u32 iop_podrc;
- u32 iop_pdatc;
- u8 res3[12];
- u32 iop_pdird;
- u32 iop_ppard;
- u32 iop_psord;
- u32 iop_podrd;
- u32 iop_pdatd;
- u8 res4[12];
-} iop_cpm2_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- u8 cpmt_tgcr1;
- u8 res1[3];
- u8 cpmt_tgcr2;
- u8 res2[11];
- u16 cpmt_tmr1;
- u16 cpmt_tmr2;
- u16 cpmt_trr1;
- u16 cpmt_trr2;
- u16 cpmt_tcr1;
- u16 cpmt_tcr2;
- u16 cpmt_tcn1;
- u16 cpmt_tcn2;
- u16 cpmt_tmr3;
- u16 cpmt_tmr4;
- u16 cpmt_trr3;
- u16 cpmt_trr4;
- u16 cpmt_tcr3;
- u16 cpmt_tcr4;
- u16 cpmt_tcn3;
- u16 cpmt_tcn4;
- u16 cpmt_ter1;
- u16 cpmt_ter2;
- u16 cpmt_ter3;
- u16 cpmt_ter4;
- u8 res3[584];
-} cpmtimer_cpm2_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- u8 res0[24];
- u8 sdma_sdsr;
- u8 res1[3];
- u8 sdma_sdmr;
- u8 res2[3];
- u8 sdma_idsr1;
- u8 res3[3];
- u8 sdma_idmr1;
- u8 res4[3];
- u8 sdma_idsr2;
- u8 res5[3];
- u8 sdma_idmr2;
- u8 res6[3];
- u8 sdma_idsr3;
- u8 res7[3];
- u8 sdma_idmr3;
- u8 res8[3];
- u8 sdma_idsr4;
- u8 res9[3];
- u8 sdma_idmr4;
- u8 res10[707];
-} sdma_cpm2_t;
-
-/* Fast controllers
-*/
-typedef struct fcc {
- u32 fcc_gfmr;
- u32 fcc_fpsmr;
- u16 fcc_ftodr;
- u8 res1[2];
- u16 fcc_fdsr;
- u8 res2[2];
- u16 fcc_fcce;
- u8 res3[2];
- u16 fcc_fccm;
- u8 res4[2];
- u8 fcc_fccs;
- u8 res5[3];
- u8 fcc_ftirr_phy[4];
-} fcc_t;
-
-/* Fast controllers continued
- */
-typedef struct fcc_c {
- u32 fcc_firper;
- u32 fcc_firer;
- u32 fcc_firsr_hi;
- u32 fcc_firsr_lo;
- u8 fcc_gfemr;
- u8 res1[15];
-} fcc_c_t;
-
-/* TC Layer
- */
-typedef struct tclayer {
- u16 tc_tcmode;
- u16 tc_cdsmr;
- u16 tc_tcer;
- u16 tc_rcc;
- u16 tc_tcmr;
- u16 tc_fcc;
- u16 tc_ccc;
- u16 tc_icc;
- u16 tc_tcc;
- u16 tc_ecc;
- u8 res1[12];
-} tclayer_t;
-
-
-/* I2C
-*/
-typedef struct i2c {
- u8 i2c_i2mod;
- u8 res1[3];
- u8 i2c_i2add;
- u8 res2[3];
- u8 i2c_i2brg;
- u8 res3[3];
- u8 i2c_i2com;
- u8 res4[3];
- u8 i2c_i2cer;
- u8 res5[3];
- u8 i2c_i2cmr;
- u8 res6[331];
-} i2c_cpm2_t;
-
-typedef struct scc { /* Serial communication channels */
- u32 scc_gsmrl;
- u32 scc_gsmrh;
- u16 scc_psmr;
- u8 res1[2];
- u16 scc_todr;
- u16 scc_dsr;
- u16 scc_scce;
- u8 res2[2];
- u16 scc_sccm;
- u8 res3;
- u8 scc_sccs;
- u8 res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- u8 res1[2];
- u16 smc_smcmr;
- u8 res2[2];
- u8 smc_smce;
- u8 res3[3];
- u8 smc_smcm;
- u8 res4[5];
-} smc_t;
-
-/* Serial Peripheral Interface.
-*/
-typedef struct spi_ctrl {
- u16 spi_spmode;
- u8 res1[4];
- u8 spi_spie;
- u8 res2[3];
- u8 spi_spim;
- u8 res3[2];
- u8 spi_spcom;
- u8 res4[82];
-} spictl_cpm2_t;
-
-/* CPM Mux.
-*/
-typedef struct cpmux {
- u8 cmx_si1cr;
- u8 res1;
- u8 cmx_si2cr;
- u8 res2;
- u32 cmx_fcr;
- u32 cmx_scr;
- u8 cmx_smr;
- u8 res3;
- u16 cmx_uar;
- u8 res4[16];
-} cpmux_t;
-
-/* SIRAM control
-*/
-typedef struct siram {
- u16 si_amr;
- u16 si_bmr;
- u16 si_cmr;
- u16 si_dmr;
- u8 si_gmr;
- u8 res1;
- u8 si_cmdr;
- u8 res2;
- u8 si_str;
- u8 res3;
- u16 si_rsr;
-} siramctl_t;
-
-typedef struct mcc {
- u16 mcc_mcce;
- u8 res1[2];
- u16 mcc_mccm;
- u8 res2[2];
- u8 mcc_mccf;
- u8 res3[7];
-} mcc_t;
-
-typedef struct comm_proc {
- u32 cp_cpcr;
- u32 cp_rccr;
- u8 res1[14];
- u16 cp_rter;
- u8 res2[2];
- u16 cp_rtmr;
- u16 cp_rtscr;
- u8 res3[2];
- u32 cp_rtsr;
- u8 res4[12];
-} cpm_cpm2_t;
-
-/* USB Controller.
-*/
-typedef struct usb_ctlr {
- u8 usb_usmod;
- u8 usb_usadr;
- u8 usb_uscom;
- u8 res1[1];
- u16 usb_usep1;
- u16 usb_usep2;
- u16 usb_usep3;
- u16 usb_usep4;
- u8 res2[4];
- u16 usb_usber;
- u8 res3[2];
- u16 usb_usbmr;
- u8 usb_usbs;
- u8 res4[7];
-} usb_cpm2_t;
-
-/* ...and the whole thing wrapped up....
-*/
-
-typedef struct immap {
- /* Some references are into the unique and known dpram spaces,
- * others are from the generic base.
- */
-#define im_dprambase im_dpram1
- u8 im_dpram1[16*1024];
- u8 res1[16*1024];
- u8 im_dpram2[4*1024];
- u8 res2[8*1024];
- u8 im_dpram3[4*1024];
- u8 res3[16*1024];
-
- sysconf_cpm2_t im_siu_conf; /* SIU Configuration */
- memctl_cpm2_t im_memctl; /* Memory Controller */
- sit_cpm2_t im_sit; /* System Integration Timers */
- pci_cpm2_t im_pci; /* PCI Controller */
- intctl_cpm2_t im_intctl; /* Interrupt Controller */
- car_cpm2_t im_clkrst; /* Clocks and reset */
- iop_cpm2_t im_ioport; /* IO Port control/status */
- cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */
- sdma_cpm2_t im_sdma; /* SDMA control/status */
-
- fcc_t im_fcc[3]; /* Three FCCs */
- u8 res4z[32];
- fcc_c_t im_fcc_c[3]; /* Continued FCCs */
-
- u8 res4[32];
-
- tclayer_t im_tclayer[8]; /* Eight TCLayers */
- u16 tc_tcgsr;
- u16 tc_tcger;
-
- /* First set of baud rate generators.
- */
- u8 res[236];
- u32 im_brgc5;
- u32 im_brgc6;
- u32 im_brgc7;
- u32 im_brgc8;
-
- u8 res5[608];
-
- i2c_cpm2_t im_i2c; /* I2C control/status */
- cpm_cpm2_t im_cpm; /* Communication processor */
-
- /* Second set of baud rate generators.
- */
- u32 im_brgc1;
- u32 im_brgc2;
- u32 im_brgc3;
- u32 im_brgc4;
-
- scc_t im_scc[4]; /* Four SCCs */
- smc_t im_smc[2]; /* Couple of SMCs */
- spictl_cpm2_t im_spi; /* A SPI */
- cpmux_t im_cpmux; /* CPM clock route mux */
- siramctl_t im_siramctl1; /* First SI RAM Control */
- mcc_t im_mcc1; /* First MCC */
- siramctl_t im_siramctl2; /* Second SI RAM Control */
- mcc_t im_mcc2; /* Second MCC */
- usb_cpm2_t im_usb; /* USB Controller */
-
- u8 res6[1153];
-
- u16 im_si1txram[256];
- u8 res7[512];
- u16 im_si1rxram[256];
- u8 res8[512];
- u16 im_si2txram[256];
- u8 res9[512];
- u16 im_si2rxram[256];
- u8 res10[512];
- u8 res11[4096];
-} cpm2_map_t;
-
-extern cpm2_map_t *cpm2_immr;
-
-#endif /* __IMMAP_CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
deleted file mode 100644
index a0d409a5d80..00000000000
--- a/include/asm-ppc/io.h
+++ /dev/null
@@ -1,502 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_IO_H
-#define _PPC_IO_H
-
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/page.h>
-#include <asm/byteorder.h>
-#include <asm/synch.h>
-#include <asm/mmu.h>
-
-#define SIO_CONFIG_RA 0x398
-#define SIO_CONFIG_RD 0x399
-
-#define SLOW_DOWN_IO
-
-#define PMAC_ISA_MEM_BASE 0
-#define PMAC_PCI_DRAM_OFFSET 0
-#define CHRP_ISA_IO_BASE 0xf8000000
-#define CHRP_ISA_MEM_BASE 0xf7000000
-#define CHRP_PCI_DRAM_OFFSET 0
-#define PREP_ISA_IO_BASE 0x80000000
-#define PREP_ISA_MEM_BASE 0xc0000000
-#define PREP_PCI_DRAM_OFFSET 0x80000000
-
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#elif !defined(CONFIG_PCI)
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#else /* Everyone else */
-#define _IO_BASE isa_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-#endif /* Platform-dependent I/O */
-
-#define ___IO_BASE ((void __iomem *)_IO_BASE)
-extern unsigned long isa_io_base;
-extern unsigned long isa_mem_base;
-extern unsigned long pci_dram_offset;
-
-/*
- * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
- *
- * Read operations have additional twi & isync to make sure the read
- * is actually performed (i.e. the data has come back) before we start
- * executing any following instructions.
- */
-extern inline int in_8(const volatile unsigned char __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__(
- "sync; lbz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_8(volatile unsigned char __iomem *addr, int val)
-{
- __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
-}
-
-extern inline int in_le16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline int in_be16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-
-extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-#if defined (CONFIG_8260_PCI9)
-#define readb(addr) in_8((volatile u8 *)(addr))
-#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
-#else
-static inline __u8 readb(const volatile void __iomem *addr)
-{
- return in_8(addr);
-}
-static inline void writeb(__u8 b, volatile void __iomem *addr)
-{
- out_8(addr, b);
-}
-#endif
-
-#if defined (CONFIG_8260_PCI9)
-/* Use macros if PCI9 workaround enabled */
-#define readw(addr) in_le16((volatile u16 *)(addr))
-#define readl(addr) in_le32((volatile u32 *)(addr))
-#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
-#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
-#else
-static inline __u16 readw(const volatile void __iomem *addr)
-{
- return in_le16(addr);
-}
-static inline __u32 readl(const volatile void __iomem *addr)
-{
- return in_le32(addr);
-}
-static inline void writew(__u16 b, volatile void __iomem *addr)
-{
- out_le16(addr, b);
-}
-static inline void writel(__u32 b, volatile void __iomem *addr)
-{
- out_le32(addr, b);
-}
-#endif /* CONFIG_8260_PCI9 */
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-static inline __u8 __raw_readb(const volatile void __iomem *addr)
-{
- return *(__force volatile __u8 *)(addr);
-}
-static inline __u16 __raw_readw(const volatile void __iomem *addr)
-{
- return *(__force volatile __u16 *)(addr);
-}
-static inline __u32 __raw_readl(const volatile void __iomem *addr)
-{
- return *(__force volatile __u32 *)(addr);
-}
-static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
-{
- *(__force volatile __u8 *)(addr) = b;
-}
-static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
-{
- *(__force volatile __u16 *)(addr) = b;
-}
-static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
-{
- *(__force volatile __u32 *)(addr) = b;
-}
-
-#define mmiowb()
-
-/*
- * The insw/outsw/insl/outsl macros don't do byte-swapping.
- * They are only used in practice for transferring buffers which
- * are arrays of bytes, and byte-swapping is not appropriate in
- * that case. - paulus
- */
-#define insb(port, buf, ns) _insb((port)+___IO_BASE, (buf), (ns))
-#define outsb(port, buf, ns) _outsb((port)+___IO_BASE, (buf), (ns))
-#define insw(port, buf, ns) _insw_ns((port)+___IO_BASE, (buf), (ns))
-#define outsw(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns))
-#define insl(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl))
-#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
-
-#define readsb(a, b, n) _insb((a), (b), (n))
-#define readsw(a, b, n) _insw_ns((a), (b), (n))
-#define readsl(a, b, n) _insl_ns((a), (b), (n))
-#define writesb(a, b, n) _outsb((a),(b),(n))
-#define writesw(a, b, n) _outsw_ns((a),(b),(n))
-#define writesl(a, b, n) _outsl_ns((a),(b),(n))
-
-
-/*
- * On powermacs and 8xx we will get a machine check exception
- * if we try to read data from a non-existent I/O port. Because
- * the machine check is an asynchronous exception, it isn't
- * well-defined which instruction SRR0 will point to when the
- * exception occurs.
- * With the sequence below (twi; isync; nop), we have found that
- * the machine check occurs on one of the three instructions on
- * all PPC implementations tested so far. The twi and isync are
- * needed on the 601 (in fact twi; sync works too), the isync and
- * nop are needed on 604[e|r], and any of twi, sync or isync will
- * work on 603[e], 750, 74xx.
- * The twi creates an explicit data dependency on the returned
- * value which seems to be needed to make the 601 wait for the
- * load to finish.
- */
-
-#define __do_in_asm(name, op) \
-extern __inline__ unsigned int name(unsigned int port) \
-{ \
- unsigned int x; \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: twi 0,%0,0\n" \
- "2: isync\n" \
- "3: nop\n" \
- "4:\n" \
- ".section .fixup,\"ax\"\n" \
- "5: li %0,-1\n" \
- " b 4b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,5b\n" \
- " .long 1b,5b\n" \
- " .long 2b,5b\n" \
- " .long 3b,5b\n" \
- ".previous" \
- : "=&r" (x) \
- : "r" (port + ___IO_BASE)); \
- return x; \
-}
-
-#define __do_out_asm(name, op) \
-extern __inline__ void name(unsigned int val, unsigned int port) \
-{ \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: sync\n" \
- "2:\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,2b\n" \
- " .long 1b,2b\n" \
- ".previous" \
- : : "r" (val), "r" (port + ___IO_BASE)); \
-}
-
-__do_out_asm(outb, "stbx")
-#if defined (CONFIG_8260_PCI9)
-/* in asm cannot be defined if PCI9 workaround is used */
-#define inb(port) in_8((port)+___IO_BASE)
-#define inw(port) in_le16((port)+___IO_BASE)
-#define inl(port) in_le32((port)+___IO_BASE)
-__do_out_asm(outw, "sthbrx")
-__do_out_asm(outl, "stwbrx")
-#else
-__do_in_asm(inb, "lbzx")
-__do_in_asm(inw, "lhbrx")
-__do_in_asm(inl, "lwbrx")
-__do_out_asm(outw, "sthbrx")
-__do_out_asm(outl, "stwbrx")
-
-#endif
-
-#define inb_p(port) inb((port))
-#define outb_p(val, port) outb((val), (port))
-#define inw_p(port) inw((port))
-#define outw_p(val, port) outw((val), (port))
-#define inl_p(port) inl((port))
-#define outl_p(val, port) outl((val), (port))
-
-extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
-extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
-extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
-extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
-extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
-extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
-
-
-#define IO_SPACE_LIMIT ~0
-
-#if defined (CONFIG_8260_PCI9)
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-#else
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- memset((void __force *)addr, val, count);
-}
-static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count)
-{
- memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- memcpy((void __force *) dst, src, count);
-}
-#endif
-
-/*
- * Map in an area of physical address space, for accessing
- * I/O devices etc.
- */
-extern void __iomem *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags);
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#ifdef CONFIG_44x
-extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
-#endif
-#define ioremap_nocache(addr, size) ioremap((addr), (size))
-extern void iounmap(volatile void __iomem *addr);
-extern unsigned long iopa(unsigned long addr);
-extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags);
-
-/*
- * The PCI bus is inherently Little-Endian. The PowerPC is being
- * run Big-Endian. Thus all values which cross the [PCI] barrier
- * must be endian-adjusted. Also, the local DRAM has a different
- * address from the PCI point of view, thus buffer addresses also
- * have to be modified [mapped] appropriately.
- */
-extern inline unsigned long virt_to_bus(volatile void * address)
-{
- if (address == (void *)0)
- return 0;
- return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
-}
-
-extern inline void * bus_to_virt(unsigned long address)
-{
- if (address == 0)
- return NULL;
- return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
-}
-
-/*
- * Change virtual addresses to physical addresses and vv, for
- * addresses in the area where the kernel has the RAM mapped.
- */
-extern inline unsigned long virt_to_phys(volatile void * address)
-{
- return (unsigned long) address - KERNELBASE;
-}
-
-extern inline void * phys_to_virt(unsigned long address)
-{
- return (void *) (address + KERNELBASE);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r() eieio()
-#define iobarrier_w() eieio()
-
-/*
- * Here comes the ppc implementation of the IOMAP
- * interfaces.
- */
-static inline unsigned int ioread8(void __iomem *addr)
-{
- return readb(addr);
-}
-
-static inline unsigned int ioread16(void __iomem *addr)
-{
- return readw(addr);
-}
-
-static inline unsigned int ioread32(void __iomem *addr)
-{
- return readl(addr);
-}
-
-static inline void iowrite8(u8 val, void __iomem *addr)
-{
- writeb(val, addr);
-}
-
-static inline void iowrite16(u16 val, void __iomem *addr)
-{
- writew(val, addr);
-}
-
-static inline void iowrite32(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-
-static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insb(addr, dst, count);
-}
-
-static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insw_ns(addr, dst, count);
-}
-
-static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insl_ns(addr, dst, count);
-}
-
-static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsb(addr, src, count);
-}
-
-static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsw_ns(addr, src, count);
-}
-
-static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsl_ns(addr, src, count);
-}
-
-/* Create a virtual mapping cookie for an IO port range */
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *);
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-
-#endif /* _PPC_IO_H */
-
-#ifdef CONFIG_8260_PCI9
-#include <asm/mpc8260_pci9.h>
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-/* access ports */
-#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
-#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-
-#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
-#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
-
-#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
-#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/irq_regs.h b/include/asm-ppc/irq_regs.h
deleted file mode 100644
index 3dd9c0b7027..00000000000
--- a/include/asm-ppc/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-ppc/kdebug.h b/include/asm-ppc/kdebug.h
deleted file mode 100644
index 6ece1b03766..00000000000
--- a/include/asm-ppc/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h
deleted file mode 100644
index b617dac8296..00000000000
--- a/include/asm-ppc/kgdb.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * kgdb.h: Defines and declarations for serial line source level
- * remote debugging of the Linux kernel using gdb.
- *
- * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifdef __KERNEL__
-#ifndef _PPC_KGDB_H
-#define _PPC_KGDB_H
-
-#ifndef __ASSEMBLY__
-
-/* Things specific to the gen550 backend. */
-struct uart_port;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_kgdb_map_scc(void);
-extern void gen550_init(int, struct uart_port *);
-
-/* Things specific to the pmac backend. */
-extern void zs_kgdb_hook(int tty_num);
-
-/* To init the kgdb engine. (called by serial hook)*/
-extern void set_debug_traps(void);
-
-/* To enter the debugger explicitly. */
-extern void breakpoint(void);
-
-/* For taking exceptions
- * these are defined in traps.c
- */
-extern int (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-/* What we bring to the party */
-int kgdb_bpt(struct pt_regs *regs);
-int kgdb_sstep(struct pt_regs *regs);
-void kgdb(struct pt_regs *regs);
-int kgdb_iabr_match(struct pt_regs *regs);
-int kgdb_dabr_match(struct pt_regs *regs);
-
-/*
- * external low-level support routines (ie macserial.c)
- */
-extern void kgdb_interruptible(int); /* control interrupts from serial */
-extern void putDebugChar(char); /* write a single character */
-extern char getDebugChar(void); /* read and return a single char */
-
-#endif /* !(__ASSEMBLY__) */
-#endif /* !(_PPC_KGDB_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
deleted file mode 100644
index bf9e05dd54b..00000000000
--- a/include/asm-ppc/m8260_pci.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * include/asm-ppc/m8260_pci.h
- *
- * Definitions for the MPC8250/MPC8265/MPC8266 integrated PCI host bridge.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __M8260_PCI_H
-#define __M8260_PCI_H
-
-#include <linux/pci_ids.h>
-
-/*
- * Define the vendor/device ID for the MPC8265.
- */
-#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA)
-
-#define M8265_PCIBR0 0x101ac
-#define M8265_PCIBR1 0x101b0
-#define M8265_PCIMSK0 0x101c4
-#define M8265_PCIMSK1 0x101c8
-
-/* Bit definitions for PCIBR registers */
-
-#define PCIBR_ENABLE 0x00000001
-
-/* Bit definitions for PCIMSK registers */
-
-#define PCIMSK_32KiB 0xFFFF8000 /* Size of window, smallest */
-#define PCIMSK_64KiB 0xFFFF0000
-#define PCIMSK_128KiB 0xFFFE0000
-#define PCIMSK_256KiB 0xFFFC0000
-#define PCIMSK_512KiB 0xFFF80000
-#define PCIMSK_1MiB 0xFFF00000
-#define PCIMSK_2MiB 0xFFE00000
-#define PCIMSK_4MiB 0xFFC00000
-#define PCIMSK_8MiB 0xFF800000
-#define PCIMSK_16MiB 0xFF000000
-#define PCIMSK_32MiB 0xFE000000
-#define PCIMSK_64MiB 0xFC000000
-#define PCIMSK_128MiB 0xF8000000
-#define PCIMSK_256MiB 0xF0000000
-#define PCIMSK_512MiB 0xE0000000
-#define PCIMSK_1GiB 0xC0000000 /* Size of window, largest */
-
-
-#define M826X_SCCR_PCI_MODE_EN 0x100
-
-
-/*
- * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
- * addresses are translated to PCI addresses when the MPC826x is a PCI bus
- * master (initiator).
- */
-
-#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
-#define POTAR_REG1 0x10818
-#define POTAR_REG2 0x10830
-
-#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
-#define POBAR_REG1 0x10820
-#define POBAR_REG2 0x10838
-
-#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
-#define POCMR_REG1 0x10828
-#define POCMR_REG2 0x10840
-
-/* Bit definitions for POMCR registers */
-
-#define POCMR_MASK_4KiB 0x000FFFFF
-#define POCMR_MASK_8KiB 0x000FFFFE
-#define POCMR_MASK_16KiB 0x000FFFFC
-#define POCMR_MASK_32KiB 0x000FFFF8
-#define POCMR_MASK_64KiB 0x000FFFF0
-#define POCMR_MASK_128KiB 0x000FFFE0
-#define POCMR_MASK_256KiB 0x000FFFC0
-#define POCMR_MASK_512KiB 0x000FFF80
-#define POCMR_MASK_1MiB 0x000FFF00
-#define POCMR_MASK_2MiB 0x000FFE00
-#define POCMR_MASK_4MiB 0x000FFC00
-#define POCMR_MASK_8MiB 0x000FF800
-#define POCMR_MASK_16MiB 0x000FF000
-#define POCMR_MASK_32MiB 0x000FE000
-#define POCMR_MASK_64MiB 0x000FC000
-#define POCMR_MASK_128MiB 0x000F8000
-#define POCMR_MASK_256MiB 0x000F0000
-#define POCMR_MASK_512MiB 0x000E0000
-#define POCMR_MASK_1GiB 0x000C0000
-
-#define POCMR_ENABLE 0x80000000
-#define POCMR_PCI_IO 0x40000000
-#define POCMR_PREFETCH_EN 0x20000000
-
-/* Soft PCI reset */
-
-#define PCI_GCR_REG 0x10880
-
-/* Bit definitions for PCI_GCR registers */
-
-#define PCIGCR_PCI_BUS_EN 0x1
-
-#define PCI_EMR_REG 0x10888
-/*
- * Inbound ATU registers (2 sets). These registers control how PCI addresses
- * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
- */
-
-#define PITAR_REG1 0x108D0
-#define PIBAR_REG1 0x108D8
-#define PICMR_REG1 0x108E0
-#define PITAR_REG0 0x108E8
-#define PIBAR_REG0 0x108F0
-#define PICMR_REG0 0x108F8
-
-/* Bit definitions for PCI Inbound Comparison Mask registers */
-
-#define PICMR_MASK_4KiB 0x000FFFFF
-#define PICMR_MASK_8KiB 0x000FFFFE
-#define PICMR_MASK_16KiB 0x000FFFFC
-#define PICMR_MASK_32KiB 0x000FFFF8
-#define PICMR_MASK_64KiB 0x000FFFF0
-#define PICMR_MASK_128KiB 0x000FFFE0
-#define PICMR_MASK_256KiB 0x000FFFC0
-#define PICMR_MASK_512KiB 0x000FFF80
-#define PICMR_MASK_1MiB 0x000FFF00
-#define PICMR_MASK_2MiB 0x000FFE00
-#define PICMR_MASK_4MiB 0x000FFC00
-#define PICMR_MASK_8MiB 0x000FF800
-#define PICMR_MASK_16MiB 0x000FF000
-#define PICMR_MASK_32MiB 0x000FE000
-#define PICMR_MASK_64MiB 0x000FC000
-#define PICMR_MASK_128MiB 0x000F8000
-#define PICMR_MASK_256MiB 0x000F0000
-#define PICMR_MASK_512MiB 0x000E0000
-#define PICMR_MASK_1GiB 0x000C0000
-
-#define PICMR_ENABLE 0x80000000
-#define PICMR_NO_SNOOP_EN 0x40000000
-#define PICMR_PREFETCH_EN 0x20000000
-
-/* PCI error Registers */
-
-#define PCI_ERROR_STATUS_REG 0x10884
-#define PCI_ERROR_MASK_REG 0x10888
-#define PCI_ERROR_CONTROL_REG 0x1088C
-#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
-#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
-#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
-
-/* PCI error Register bit defines */
-
-#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
-#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
-#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
-#define PCI_ERROR_PCI_NO_RSP 0x00000008
-#define PCI_ERROR_PCI_TAR_ABT 0x00000010
-#define PCI_ERROR_PCI_SERR 0x00000020
-#define PCI_ERROR_PCI_PERR_RD 0x00000040
-#define PCI_ERROR_PCI_PERR_WR 0x00000080
-#define PCI_ERROR_I2O_OFQO 0x00000100
-#define PCI_ERROR_I2O_IPQO 0x00000200
-#define PCI_ERROR_IRA 0x00000400
-#define PCI_ERROR_NMI 0x00000800
-#define PCI_ERROR_I2O_DBMC 0x00001000
-
-/*
- * Register pair used to generate configuration cycles on the PCI bus
- * and access the MPC826x's own PCI configuration registers.
- */
-
-#define PCI_CFG_ADDR_REG 0x10900
-#define PCI_CFG_DATA_REG 0x10904
-
-/* Bus parking decides where the bus control sits when idle */
-/* If modifying memory controllers for PCI park on the core */
-
-#define PPC_ACR_BUS_PARK_CORE 0x6
-#define PPC_ACR_BUS_PARK_PCI 0x3
-
-#endif /* __M8260_PCI_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
deleted file mode 100644
index a20b499b018..00000000000
--- a/include/asm-ppc/machdep.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_MACHDEP_H
-#define _PPC_MACHDEP_H
-
-#include <linux/init.h>
-#include <linux/kexec.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-struct pt_regs;
-struct pci_bus;
-struct pci_dev;
-struct seq_file;
-struct file;
-
-/*
- * This is for compatibility with ARCH=powerpc.
- */
-#define machine_is(x) __MACHINE_IS_##x
-#define __MACHINE_IS_powermac 0
-#define __MACHINE_IS_chrp 0
-#ifdef CONFIG_PPC_PREP
-#define __MACHINE_IS_prep 1
-#else
-#define __MACHINE_IS_prep 0
-#endif
-
-/* We export this macro for external modules like Alsa to know if
- * ppc_md.feature_call is implemented or not
- */
-#define CONFIG_PPC_HAS_FEATURE_CALLS
-
-struct machdep_calls {
- void (*setup_arch)(void);
- /* Optional, may be NULL. */
- int (*show_cpuinfo)(struct seq_file *m);
- int (*show_percpuinfo)(struct seq_file *m, int i);
- /* Optional, may be NULL. */
- unsigned int (*irq_canonicalize)(unsigned int irq);
- void (*init_IRQ)(void);
- int (*get_irq)(void);
-
- /* A general init function, called by ppc_init in init/main.c.
- May be NULL. DEPRECATED ! */
- void (*init)(void);
- /* For compatibility with merged platforms */
- void (*init_early)(void);
-
- void (*restart)(char *cmd);
- void (*power_off)(void);
- void (*halt)(void);
-
- void (*idle_loop)(void);
- void (*power_save)(void);
-
- long (*time_init)(void); /* Optional, may be NULL */
- int (*set_rtc_time)(unsigned long nowtime);
- unsigned long (*get_rtc_time)(void);
- unsigned char (*rtc_read_val)(int addr);
- void (*rtc_write_val)(int addr, unsigned char val);
- void (*calibrate_decr)(void);
-
- void (*heartbeat)(void);
- unsigned long heartbeat_reset;
- unsigned long heartbeat_count;
-
- unsigned long (*find_end_of_memory)(void);
- void (*setup_io_mappings)(void);
-
- void (*early_serial_map)(void);
- void (*progress)(char *, unsigned short);
- void (*kgdb_map_scc)(void);
-
- unsigned char (*nvram_read_val)(int addr);
- void (*nvram_write_val)(int addr, unsigned char val);
- void (*nvram_sync)(void);
-
- /*
- * optional PCI "hooks"
- */
-
- /* Called after scanning the bus, before allocating resources */
- void (*pcibios_fixup)(void);
-
- /* Called after PPC generic resource fixup to perform
- machine specific fixups */
- void (*pcibios_fixup_resources)(struct pci_dev *);
-
- /* Called for each PCI bus in the system when it's probed */
- void (*pcibios_fixup_bus)(struct pci_bus *);
-
- /* Called when pci_enable_device() is called (initial=0) or
- * when a device with no assigned resource is found (initial=1).
- * Returns 0 to allow assignment/enabling of the device. */
- int (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
-
- /* For interrupt routing */
- unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *);
- int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char);
-
- /* Called in indirect_* to avoid touching devices */
- int (*pci_exclude_device)(unsigned char, unsigned char);
-
- /* Called at then very end of pcibios_init() */
- void (*pcibios_after_init)(void);
-
- /* Get access protection for /dev/mem */
- pgprot_t (*phys_mem_access_prot)(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t vma_prot);
-
- /* Motherboard/chipset features. This is a kind of general purpose
- * hook used to control some machine specific features (like reset
- * lines, chip power control, etc...).
- */
- long (*feature_call)(unsigned int feature, ...);
-
-#ifdef CONFIG_SMP
- /* functions for dealing with other cpus */
- struct smp_ops_t *smp_ops;
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_KEXEC
- /* Called to shutdown machine specific hardware not already controlled
- * by other drivers.
- * XXX Should we move this one out of kexec scope?
- */
- void (*machine_shutdown)(void);
-
- /* Called to do the minimal shutdown needed to run a kexec'd kernel
- * to run successfully.
- * XXX Should we move this one out of kexec scope?
- */
- void (*machine_crash_shutdown)(void);
-
- /* Called to do what every setup is needed on image and the
- * reboot code buffer. Returns 0 on success.
- * Provide your own (maybe dummy) implementation if your platform
- * claims to support kexec.
- */
- int (*machine_kexec_prepare)(struct kimage *image);
-
- /* Called to handle any machine specific cleanup on image */
- void (*machine_kexec_cleanup)(struct kimage *image);
-
- /* Called to perform the _real_ kexec.
- * Do NOT allocate memory or fail here. We are past the point of
- * no return.
- */
- void (*machine_kexec)(struct kimage *image);
-#endif /* CONFIG_KEXEC */
-};
-
-extern struct machdep_calls ppc_md;
-extern char cmd_line[COMMAND_LINE_SIZE];
-
-extern void setup_pci_ptrs(void);
-
-#ifdef CONFIG_SMP
-struct smp_ops_t {
- void (*message_pass)(int target, int msg);
- int (*probe)(void);
- void (*kick_cpu)(int nr);
- void (*setup_cpu)(int nr);
- void (*space_timers)(int nr);
- void (*take_timebase)(void);
- void (*give_timebase)(void);
-};
-
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
-#endif /* _PPC_MACHDEP_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/md.h b/include/asm-ppc/md.h
deleted file mode 100644
index 9a9b6b42b4b..00000000000
--- a/include/asm-ppc/md.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * md.h: High speed xor_block operation for RAID4/5
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT sizeof(long)
-
-#endif /* __ASM_MD_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mk48t59.h b/include/asm-ppc/mk48t59.h
deleted file mode 100644
index 6a0ed6fc2d5..00000000000
--- a/include/asm-ppc/mk48t59.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Registers for the mk48t59 real-time-clock
- */
-
-#ifndef _PPC_MK48T59_H
-#define _PPC_MK48T59_H
-
-/* RTC Offsets */
-
-#define MK48T59_RTC_SECONDS 0x1FF9
-#define MK48T59_RTC_MINUTES 0x1FFA
-#define MK48T59_RTC_HOURS 0x1FFB
-#define MK48T59_RTC_DAY_OF_WEEK 0x1FFC
-#define MK48T59_RTC_DAY_OF_MONTH 0x1FFD
-#define MK48T59_RTC_MONTH 0x1FFE
-#define MK48T59_RTC_YEAR 0x1FFF
-
-#define MK48T59_RTC_CONTROLA 0x1FF8
-#define MK48T59_RTC_CA_WRITE 0x80
-#define MK48T59_RTC_CA_READ 0x40
-#define MK48T59_RTC_CA_CALIB_SIGN 0x20
-#define MK48T59_RTC_CA_CALIB_MASK 0x1f
-
-#define MK48T59_RTC_CONTROLB 0x1FF9
-#define MK48T59_RTC_CB_STOP 0x80
-
-#endif /* _PPC_MK48T59_H */
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
deleted file mode 100644
index d76ef098ed3..00000000000
--- a/include/asm-ppc/mmu.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * PowerPC memory management structures
- */
-
-#ifdef __KERNEL__
-#ifndef _PPC_MMU_H_
-#define _PPC_MMU_H_
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * Define physical address type. Machines using split size
- * virtual/physical addressing like 32-bit virtual / 36-bit
- * physical need a larger than native word size type. -Matt
- */
-#ifndef CONFIG_PHYS_64BIT
-#define PHYS_FMT "%.8lx"
-#else
-extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
-#define PHYS_FMT "%16Lx"
-#endif
-
-typedef struct {
- unsigned long id;
- unsigned long vdso_base;
-} mm_context_t;
-
-/* Hardware Page Table Entry */
-typedef struct _PTE {
- unsigned long v:1; /* Entry is valid */
- unsigned long vsid:24; /* Virtual segment identifier */
- unsigned long h:1; /* Hash algorithm indicator */
- unsigned long api:6; /* Abbreviated page index */
- unsigned long rpn:20; /* Real (physical) page number */
- unsigned long :3; /* Unused */
- unsigned long r:1; /* Referenced */
- unsigned long c:1; /* Changed */
- unsigned long w:1; /* Write-thru cache mode */
- unsigned long i:1; /* Cache inhibited */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page protection */
-} PTE;
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-#define PP_RWXX 0 /* Supervisor read/write, User none */
-#define PP_RWRX 1 /* Supervisor read/write, User read */
-#define PP_RWRW 2 /* Supervisor read/write, User read/write */
-#define PP_RXRX 3 /* Supervisor read, User read */
-
-/* Segment Register */
-typedef struct _SEGREG {
- unsigned long t:1; /* Normal or I/O type */
- unsigned long ks:1; /* Supervisor 'key' (normally 0) */
- unsigned long kp:1; /* User 'key' (normally 1) */
- unsigned long n:1; /* No-execute */
- unsigned long :4; /* Unused */
- unsigned long vsid:24; /* Virtual Segment Identifier */
-} SEGREG;
-
-/* Block Address Translation (BAT) Registers */
-typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :8; /* unused */
- unsigned long w:1;
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long ks:1; /* Supervisor key (normally 0) */
- unsigned long kp:1; /* User key (normally 1) */
- unsigned long pp:2; /* Page access protections */
-} P601_BATU;
-
-typedef struct _BATU { /* Upper part of BAT (all except 601) */
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :4; /* Unused */
- unsigned long bl:11; /* Block size mask */
- unsigned long vs:1; /* Supervisor valid */
- unsigned long vp:1; /* User valid */
-} BATU;
-
-typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long v:1; /* Valid bit */
- unsigned long bl:6; /* Block size mask */
-} P601_BATL;
-
-typedef struct _BATL { /* Lower part of BAT (all except 601) */
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long w:1; /* Write-thru cache */
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded (MBZ in IBAT) */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page access protections */
-} BATL;
-
-typedef struct _BAT {
- BATU batu; /* Upper register */
- BATL batl; /* Lower register */
-} BAT;
-
-typedef struct _P601_BAT {
- P601_BATU batu; /* Upper register */
- P601_BATL batl; /* Lower register */
-} P601_BAT;
-
-#endif /* __ASSEMBLY__ */
-
-/* Block size masks */
-#define BL_128K 0x000
-#define BL_256K 0x001
-#define BL_512K 0x003
-#define BL_1M 0x007
-#define BL_2M 0x00F
-#define BL_4M 0x01F
-#define BL_8M 0x03F
-#define BL_16M 0x07F
-#define BL_32M 0x0FF
-#define BL_64M 0x1FF
-#define BL_128M 0x3FF
-#define BL_256M 0x7FF
-
-/* BAT Access Protection */
-#define BPP_XX 0x00 /* No access */
-#define BPP_RX 0x01 /* Read only */
-#define BPP_RW 0x02 /* Read/write */
-
-/* Control/status registers for the MPC8xx.
- * A write operation to these registers causes serialized access.
- * During software tablewalk, the registers used perform mask/shift-add
- * operations when written/read. A TLB entry is created when the Mx_RPN
- * is written, and the contents of several registers are used to
- * create the entry.
- */
-#define SPRN_MI_CTR 784 /* Instruction TLB control register */
-#define MI_GPM 0x80000000 /* Set domain manager mode */
-#define MI_PPM 0x40000000 /* Set subpage protection */
-#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MI_RESETVAL 0x00000000 /* Value of register at reset */
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MI_AP 786
-#define MI_Ks 0x80000000 /* Should not be set */
-#define MI_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MI_EPN 787
-#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MI_EVALID 0x00000200 /* Entry is valid */
-#define MI_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define SPRN_MI_TWC 789
-#define MI_APG 0x000001e0 /* Access protection group (0) */
-#define MI_GUARDED 0x00000010 /* Guarded storage */
-#define MI_PSMASK 0x0000000c /* Mask of page size bits */
-#define MI_PS8MEG 0x0000000c /* 8M page size */
-#define MI_PS512K 0x00000004 /* 512K page size */
-#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MI_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define SPRN_MI_RPN 790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization. This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT 0x000001fd
-
-#define SPRN_MD_CTR 792 /* Data TLB control register */
-#define MD_GPM 0x80000000 /* Set domain manager mode */
-#define MD_PPM 0x40000000 /* Set subpage protection */
-#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
-#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
-#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MD_RESETVAL 0x04000000 /* Value of register at reset */
-
-#define SPRN_M_CASID 793 /* Address space ID (context) to match */
-#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
-
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MD_AP 794
-#define MD_Ks 0x80000000 /* Should not be set */
-#define MD_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MD_EPN 795
-#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MD_EVALID 0x00000200 /* Entry is valid */
-#define MD_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define SPRN_M_TWB 796
-#define M_L1TB 0xfffff000 /* Level 1 table base address */
-#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written. It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define SPRN_MD_TWC 797
-#define MD_L2TB 0xfffff000 /* Level 2 table base address */
-#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
-#define MD_APG 0x000001e0 /* Access protection group (0) */
-#define MD_GUARDED 0x00000010 /* Guarded storage */
-#define MD_PSMASK 0x0000000c /* Mask of page size bits */
-#define MD_PS8MEG 0x0000000c /* 8M page size */
-#define MD_PS512K 0x00000004 /* 512K page size */
-#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MD_WT 0x00000002 /* Use writethrough page attribute */
-#define MD_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define SPRN_MD_RPN 798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
- */
-#define SPRN_M_TW 799
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully- associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively.
- */
-
-#define PPC4XX_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion. On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-#define TLB_LO 1
-#define TLB_HI 0
-
-#define TLB_DATA TLB_LO
-#define TLB_TAG TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x) (((x) & 0x7) << 7)
-#define PAGESZ_1K 0
-#define PAGESZ_4K 1
-#define PAGESZ_16K 2
-#define PAGESZ_64K 3
-#define PAGESZ_256K 4
-#define PAGESZ_1M 5
-#define PAGESZ_4M 6
-#define PAGESZ_16M 7
-#define TLB_VALID 0x00000040 /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
-#define TLB_PERM_MASK 0x00000300
-#define TLB_EX 0x00000200 /* Instruction execution allowed */
-#define TLB_WR 0x00000100 /* Writes permitted */
-#define TLB_ZSEL_MASK 0x000000F0
-#define TLB_ZSEL(x) (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK 0x0000000F
-#define TLB_W 0x00000008 /* Caching is write-through */
-#define TLB_I 0x00000004 /* Caching is inhibited */
-#define TLB_M 0x00000002 /* Memory is coherent */
-#define TLB_G 0x00000001 /* Memory is guarded from prefetch */
-
-/*
- * PPC440 support
- */
-#define PPC44x_MMUCR_TID 0x000000ff
-#define PPC44x_MMUCR_STS 0x00010000
-
-#define PPC44x_TLB_PAGEID 0
-#define PPC44x_TLB_XLAT 1
-#define PPC44x_TLB_ATTRIB 2
-
-/* Page identification fields */
-#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */
-#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */
-#define PPC44x_TLB_TS 0x00000100 /* Translation address space */
-#define PPC44x_TLB_1K 0x00000000 /* Page sizes */
-#define PPC44x_TLB_4K 0x00000010
-#define PPC44x_TLB_16K 0x00000020
-#define PPC44x_TLB_64K 0x00000030
-#define PPC44x_TLB_256K 0x00000040
-#define PPC44x_TLB_1M 0x00000050
-#define PPC44x_TLB_16M 0x00000070
-#define PPC44x_TLB_256M 0x00000090
-
-/* Translation fields */
-#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */
-#define PPC44x_TLB_ERPN_MASK 0x0000000f
-
-/* Storage attribute and access control fields */
-#define PPC44x_TLB_ATTR_MASK 0x0000ff80
-#define PPC44x_TLB_U0 0x00008000 /* User 0 */
-#define PPC44x_TLB_U1 0x00004000 /* User 1 */
-#define PPC44x_TLB_U2 0x00002000 /* User 2 */
-#define PPC44x_TLB_U3 0x00001000 /* User 3 */
-#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */
-#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
-#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
-#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
-#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
-
-#define PPC44x_TLB_PERM_MASK 0x0000003f
-#define PPC44x_TLB_UX 0x00000020 /* User execution */
-#define PPC44x_TLB_UW 0x00000010 /* User write */
-#define PPC44x_TLB_UR 0x00000008 /* User read */
-#define PPC44x_TLB_SX 0x00000004 /* Super execution */
-#define PPC44x_TLB_SW 0x00000002 /* Super write */
-#define PPC44x_TLB_SR 0x00000001 /* Super read */
-
-/* Book-E defined page sizes */
-#define BOOKE_PAGESZ_1K 0
-#define BOOKE_PAGESZ_4K 1
-#define BOOKE_PAGESZ_16K 2
-#define BOOKE_PAGESZ_64K 3
-#define BOOKE_PAGESZ_256K 4
-#define BOOKE_PAGESZ_1M 5
-#define BOOKE_PAGESZ_4M 6
-#define BOOKE_PAGESZ_16M 7
-#define BOOKE_PAGESZ_64M 8
-#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1GB 10
-#define BOOKE_PAGESZ_4GB 11
-#define BOOKE_PAGESZ_16GB 12
-#define BOOKE_PAGESZ_64GB 13
-#define BOOKE_PAGESZ_256GB 14
-#define BOOKE_PAGESZ_1TB 15
-
-#ifndef CONFIG_SERIAL_TEXT_DEBUG
-#define PPC44x_EARLY_TLBS 1
-#else
-#define PPC44x_EARLY_TLBS 2
-#endif
-
-/*
- * Freescale Book-E MMU support
- */
-
-#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x) ((x) & 0x00000FFF)
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
-
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL 0x000F0000
-#define MAS4_TSIZED(x) MAS1_TSIZE(x)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID0 0x3FFF0000
-#define MAS6_SPID1 0x00007FFE
-#define MAS6_SAS 0x00000001
-#define MAS6_SPID MAS6_SPID0
-
-#define MAS7_RPN 0xFFFFFFFF
-
-#endif /* _PPC_MMU_H_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h
deleted file mode 100644
index 9f097e25b16..00000000000
--- a/include/asm-ppc/mmu_context.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifdef __KERNEL__
-#ifndef __PPC_MMU_CONTEXT_H
-#define __PPC_MMU_CONTEXT_H
-
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context. Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them. That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- * -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs). We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table. Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
- & 0xffffff)
-
-/*
- The MPC8xx has only 16 contexts. We rotate through them on each
- task switch. A better way would be to keep track of tasks that
- own contexts, and implement an LRU usage. That way very active
- tasks don't always have to pay the TLB reload overhead. The
- kernel pages are mapped shared, so the kernel can run on behalf
- of any task that makes a kernel entry. Shared does not mean they
- are not protected, just that the ASID comparison is not performed.
- -- Dan
-
- The IBM4xx has 256 contexts, so we can just rotate through these
- as a way of "switching" contexts. If the TID of the TLB is zero,
- the PID/TID comparison is disabled, so we can use a TID of zero
- to represent all kernel pages as shared among all contexts.
- -- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT 16
-#define LAST_CONTEXT 15
-#define FIRST_CONTEXT 0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT 256
-#define LAST_CONTEXT 255
-#define FIRST_CONTEXT 1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT ((unsigned long) -1)
-#define LAST_CONTEXT 32767
-#define FIRST_CONTEXT 1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS 1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- unsigned long ctx;
-
- if (mm->context.id != NO_CONTEXT)
- return;
-#ifdef FEW_CONTEXTS
- while (atomic_dec_if_positive(&nr_free_contexts) < 0)
- steal_context();
-#endif
- ctx = next_mmu_context;
- while (test_and_set_bit(ctx, context_map)) {
- ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
- if (ctx > LAST_CONTEXT)
- ctx = 0;
- }
- next_mmu_context = (ctx + 1) & LAST_CONTEXT;
- mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
- context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
- mm->context.id = NO_CONTEXT;
- mm->context.vdso_base = 0;
- return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
- preempt_disable();
- if (mm->context.id != NO_CONTEXT) {
- clear_bit(mm->context.id, context_map);
- mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
- atomic_inc(&nr_free_contexts);
-#endif
- }
- preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
- "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
- : : );
-#endif /* CONFIG_ALTIVEC */
-
- tsk->thread.pgdir = next->pgd;
-
- /* No need to flush userspace segments if the mm doesnt change */
- if (prev == next)
- return;
-
- /* Setup new userspace context */
- get_mmu_context(next);
- set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current)
-
-extern void mmu_context_init(void);
-
-#endif /* __PPC_MMU_CONTEXT_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
deleted file mode 100644
index b30a6a3b5bd..00000000000
--- a/include/asm-ppc/mpc10x.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
- * ctlr/EPIC/etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PPC_KERNEL_MPC10X_H
-#define __PPC_KERNEL_MPC10X_H
-
-#include <linux/pci_ids.h>
-#include <asm/pci-bridge.h>
-
-/*
- * The values here don't completely map everything but should work in most
- * cases.
- *
- * MAP A (PReP Map)
- * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
- * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
- * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- *
- * MAP B (CHRP Map)
- * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
- * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
- * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- */
-
-/*
- * Define the vendor/device IDs for the various bridges--should be added to
- * <linux/pci_ids.h>
- */
-#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
- PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
-
-/* Define the type of map to use */
-#define MPC10X_MEM_MAP_A 1
-#define MPC10X_MEM_MAP_B 2
-
-/* Map A (PReP Map) Defines */
-#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
-#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
-
-#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
-#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
-#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
-
-#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0
-#define MPC10X_MAPA_PCI_IO_START 0x00000000
-#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
-#define MPC10X_MAPA_PCI_MEM_START 0x00000000
-#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
-
-#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
- MPC10X_MAPA_PCI_MEM_START)
-
-/* Map B (CHRP Map) Defines */
-#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
-#define MPC10X_MAPB_CNFG_DATA 0xfee00000
-
-#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
-#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
-#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
-
-#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000
-#define MPC10X_MAPB_PCI_IO_START 0x00000000
-#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
-#define MPC10X_MAPB_PCI_MEM_START 0x80000000
-#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
-
-#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
- MPC10X_MAPB_PCI_MEM_START)
-
-/* Set hose members to values appropriate for the mem map used */
-#define MPC10X_SETUP_HOSE(hose, map) { \
- (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
- (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
- (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
- (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
- (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
- (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
-}
-
-
-/* Miscellaneous Configuration register offsets */
-#define MPC10X_CFG_PIR_REG 0x09
-#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
-#define MPC10X_CFG_PIR_AGENT 0x01
-
-#define MPC10X_CFG_EUMBBAR 0x78
-
-#define MPC10X_CFG_PICR1_REG 0xa8
-#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
-#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
-#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
-#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004
-#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
-
-#define MPC10X_CFG_PICR2_REG 0xac
-#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001
-
-#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
-#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
-#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
-#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
-#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */
-#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */
-
-/* Define offsets for the memory controller registers in the config space */
-#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
-
-/* Define some offset in the EUMB */
-#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
-
-#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
-#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
-#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
-#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
-#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
-#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
-#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
-#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
-#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
-#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
-#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
-#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
-#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
-#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
-#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
-#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
-
-/*
- * Define some recommended places to put the EUMB regs.
- * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
- */
-extern unsigned long ioremap_base;
-#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
-#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
-
-enum ppc_sys_devices {
- MPC10X_IIC1,
- MPC10X_DMA0,
- MPC10X_DMA1,
- MPC10X_UART0,
- MPC10X_UART1,
- NUM_PPC_SYS_DEVS,
-};
-
-int mpc10x_bridge_init(struct pci_controller *hose,
- uint current_map,
- uint new_map,
- uint phys_eumb_base);
-unsigned long mpc10x_get_mem_size(uint mem_map);
-int mpc10x_enable_store_gathering(struct pci_controller *hose);
-int mpc10x_disable_store_gathering(struct pci_controller *hose);
-
-/* For MPC107 boards that use the built-in openpic */
-void mpc10x_set_openpic(void);
-
-#endif /* __PPC_KERNEL_MPC10X_H */
diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
deleted file mode 100644
index d9d21aa68ba..00000000000
--- a/include/asm-ppc/mpc52xx.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx.h
- *
- * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
- * May need to be cleaned as the port goes on ...
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Originally written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_H__
-#define __ASM_MPC52xx_H__
-
-#ifndef __ASSEMBLY__
-#include <asm/ppcboot.h>
-#include <asm/types.h>
-
-struct pt_regs;
-#endif /* __ASSEMBLY__ */
-
-
-/* ======================================================================== */
-/* PPC Sys devices definition */
-/* ======================================================================== */
-
-enum ppc_sys_devices {
- MPC52xx_MSCAN1,
- MPC52xx_MSCAN2,
- MPC52xx_SPI,
- MPC52xx_USB,
- MPC52xx_BDLC,
- MPC52xx_PSC1,
- MPC52xx_PSC2,
- MPC52xx_PSC3,
- MPC52xx_PSC4,
- MPC52xx_PSC5,
- MPC52xx_PSC6,
- MPC52xx_FEC,
- MPC52xx_ATA,
- MPC52xx_I2C1,
- MPC52xx_I2C2,
- NUM_PPC_SYS_DEVS,
-};
-
-
-/* ======================================================================== */
-/* Main registers/struct addresses */
-/* ======================================================================== */
-
-/* MBAR position */
-#define MPC52xx_MBAR 0xf0000000 /* Phys address */
-#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
-#define MPC52xx_MBAR_SIZE 0x00010000
-
-#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
-#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
-
-/* Registers zone offset/size */
-#define MPC52xx_MMAP_CTL_OFFSET 0x0000
-#define MPC52xx_MMAP_CTL_SIZE 0x068
-#define MPC52xx_SDRAM_OFFSET 0x0100
-#define MPC52xx_SDRAM_SIZE 0x010
-#define MPC52xx_CDM_OFFSET 0x0200
-#define MPC52xx_CDM_SIZE 0x038
-#define MPC52xx_INTR_OFFSET 0x0500
-#define MPC52xx_INTR_SIZE 0x04c
-#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4))
-#define MPC52xx_GPT_SIZE 0x010
-#define MPC52xx_RTC_OFFSET 0x0800
-#define MPC52xx_RTC_SIZE 0x024
-#define MPC52xx_GPIO_OFFSET 0x0b00
-#define MPC52xx_GPIO_SIZE 0x040
-#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00
-#define MPC52xx_GPIO_WKUP_SIZE 0x028
-#define MPC52xx_PCI_OFFSET 0x0d00
-#define MPC52xx_PCI_SIZE 0x100
-#define MPC52xx_SDMA_OFFSET 0x1200
-#define MPC52xx_SDMA_SIZE 0x100
-#define MPC52xx_XLB_OFFSET 0x1f00
-#define MPC52xx_XLB_SIZE 0x100
-#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
-#define MPC52xx_PSC_SIZE 0x0a0
-
-/* SRAM used for SDMA */
-#define MPC52xx_SRAM_OFFSET 0x8000
-#define MPC52xx_SRAM_SIZE 0x4000
-
-
-/* ======================================================================== */
-/* IRQ mapping */
-/* ======================================================================== */
-/* Be sure to look at mpc52xx_pic.h if you wish for whatever reason to change
- * this
- */
-
-#define MPC52xx_CRIT_IRQ_NUM 4
-#define MPC52xx_MAIN_IRQ_NUM 17
-#define MPC52xx_SDMA_IRQ_NUM 17
-#define MPC52xx_PERP_IRQ_NUM 23
-
-#define MPC52xx_CRIT_IRQ_BASE 1
-#define MPC52xx_MAIN_IRQ_BASE (MPC52xx_CRIT_IRQ_BASE + MPC52xx_CRIT_IRQ_NUM)
-#define MPC52xx_SDMA_IRQ_BASE (MPC52xx_MAIN_IRQ_BASE + MPC52xx_MAIN_IRQ_NUM)
-#define MPC52xx_PERP_IRQ_BASE (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)
-
-#define MPC52xx_IRQ0 (MPC52xx_CRIT_IRQ_BASE + 0)
-#define MPC52xx_SLICE_TIMER_0_IRQ (MPC52xx_CRIT_IRQ_BASE + 1)
-#define MPC52xx_HI_INT_IRQ (MPC52xx_CRIT_IRQ_BASE + 2)
-#define MPC52xx_CCS_IRQ (MPC52xx_CRIT_IRQ_BASE + 3)
-
-#define MPC52xx_IRQ1 (MPC52xx_MAIN_IRQ_BASE + 1)
-#define MPC52xx_IRQ2 (MPC52xx_MAIN_IRQ_BASE + 2)
-#define MPC52xx_IRQ3 (MPC52xx_MAIN_IRQ_BASE + 3)
-
-#define MPC52xx_SDMA_IRQ (MPC52xx_PERP_IRQ_BASE + 0)
-#define MPC52xx_PSC1_IRQ (MPC52xx_PERP_IRQ_BASE + 1)
-#define MPC52xx_PSC2_IRQ (MPC52xx_PERP_IRQ_BASE + 2)
-#define MPC52xx_PSC3_IRQ (MPC52xx_PERP_IRQ_BASE + 3)
-#define MPC52xx_PSC6_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
-#define MPC52xx_IRDA_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
-#define MPC52xx_FEC_IRQ (MPC52xx_PERP_IRQ_BASE + 5)
-#define MPC52xx_USB_IRQ (MPC52xx_PERP_IRQ_BASE + 6)
-#define MPC52xx_ATA_IRQ (MPC52xx_PERP_IRQ_BASE + 7)
-#define MPC52xx_PCI_CNTRL_IRQ (MPC52xx_PERP_IRQ_BASE + 8)
-#define MPC52xx_PCI_SCIRX_IRQ (MPC52xx_PERP_IRQ_BASE + 9)
-#define MPC52xx_PCI_SCITX_IRQ (MPC52xx_PERP_IRQ_BASE + 10)
-#define MPC52xx_PSC4_IRQ (MPC52xx_PERP_IRQ_BASE + 11)
-#define MPC52xx_PSC5_IRQ (MPC52xx_PERP_IRQ_BASE + 12)
-#define MPC52xx_SPI_MODF_IRQ (MPC52xx_PERP_IRQ_BASE + 13)
-#define MPC52xx_SPI_SPIF_IRQ (MPC52xx_PERP_IRQ_BASE + 14)
-#define MPC52xx_I2C1_IRQ (MPC52xx_PERP_IRQ_BASE + 15)
-#define MPC52xx_I2C2_IRQ (MPC52xx_PERP_IRQ_BASE + 16)
-#define MPC52xx_MSCAN1_IRQ (MPC52xx_PERP_IRQ_BASE + 17)
-#define MPC52xx_MSCAN2_IRQ (MPC52xx_PERP_IRQ_BASE + 18)
-#define MPC52xx_IR_RX_IRQ (MPC52xx_PERP_IRQ_BASE + 19)
-#define MPC52xx_IR_TX_IRQ (MPC52xx_PERP_IRQ_BASE + 20)
-#define MPC52xx_XLB_ARB_IRQ (MPC52xx_PERP_IRQ_BASE + 21)
-#define MPC52xx_BDLC_IRQ (MPC52xx_PERP_IRQ_BASE + 22)
-
-
-
-/* ======================================================================== */
-/* Structures mapping of some unit register set */
-/* ======================================================================== */
-
-#ifndef __ASSEMBLY__
-
-/* Memory Mapping Control */
-struct mpc52xx_mmap_ctl {
- u32 mbar; /* MMAP_CTRL + 0x00 */
-
- u32 cs0_start; /* MMAP_CTRL + 0x04 */
- u32 cs0_stop; /* MMAP_CTRL + 0x08 */
- u32 cs1_start; /* MMAP_CTRL + 0x0c */
- u32 cs1_stop; /* MMAP_CTRL + 0x10 */
- u32 cs2_start; /* MMAP_CTRL + 0x14 */
- u32 cs2_stop; /* MMAP_CTRL + 0x18 */
- u32 cs3_start; /* MMAP_CTRL + 0x1c */
- u32 cs3_stop; /* MMAP_CTRL + 0x20 */
- u32 cs4_start; /* MMAP_CTRL + 0x24 */
- u32 cs4_stop; /* MMAP_CTRL + 0x28 */
- u32 cs5_start; /* MMAP_CTRL + 0x2c */
- u32 cs5_stop; /* MMAP_CTRL + 0x30 */
-
- u32 sdram0; /* MMAP_CTRL + 0x34 */
- u32 sdram1; /* MMAP_CTRL + 0X38 */
-
- u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
-
- u32 boot_start; /* MMAP_CTRL + 0x4c */
- u32 boot_stop; /* MMAP_CTRL + 0x50 */
-
- u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
-
- u32 cs6_start; /* MMAP_CTRL + 0x58 */
- u32 cs6_stop; /* MMAP_CTRL + 0x5c */
- u32 cs7_start; /* MMAP_CTRL + 0x60 */
- u32 cs7_stop; /* MMAP_CTRL + 0x64 */
-};
-
-/* SDRAM control */
-struct mpc52xx_sdram {
- u32 mode; /* SDRAM + 0x00 */
- u32 ctrl; /* SDRAM + 0x04 */
- u32 config1; /* SDRAM + 0x08 */
- u32 config2; /* SDRAM + 0x0c */
-};
-
-/* Interrupt controller */
-struct mpc52xx_intr {
- u32 per_mask; /* INTR + 0x00 */
- u32 per_pri1; /* INTR + 0x04 */
- u32 per_pri2; /* INTR + 0x08 */
- u32 per_pri3; /* INTR + 0x0c */
- u32 ctrl; /* INTR + 0x10 */
- u32 main_mask; /* INTR + 0x14 */
- u32 main_pri1; /* INTR + 0x18 */
- u32 main_pri2; /* INTR + 0x1c */
- u32 reserved1; /* INTR + 0x20 */
- u32 enc_status; /* INTR + 0x24 */
- u32 crit_status; /* INTR + 0x28 */
- u32 main_status; /* INTR + 0x2c */
- u32 per_status; /* INTR + 0x30 */
- u32 reserved2; /* INTR + 0x34 */
- u32 per_error; /* INTR + 0x38 */
-};
-
-/* SDMA */
-struct mpc52xx_sdma {
- u32 taskBar; /* SDMA + 0x00 */
- u32 currentPointer; /* SDMA + 0x04 */
- u32 endPointer; /* SDMA + 0x08 */
- u32 variablePointer;/* SDMA + 0x0c */
-
- u8 IntVect1; /* SDMA + 0x10 */
- u8 IntVect2; /* SDMA + 0x11 */
- u16 PtdCntrl; /* SDMA + 0x12 */
-
- u32 IntPend; /* SDMA + 0x14 */
- u32 IntMask; /* SDMA + 0x18 */
-
- u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
-
- u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
-
- u32 cReqSelect; /* SDMA + 0x5c */
- u32 task_size0; /* SDMA + 0x60 */
- u32 task_size1; /* SDMA + 0x64 */
- u32 MDEDebug; /* SDMA + 0x68 */
- u32 ADSDebug; /* SDMA + 0x6c */
- u32 Value1; /* SDMA + 0x70 */
- u32 Value2; /* SDMA + 0x74 */
- u32 Control; /* SDMA + 0x78 */
- u32 Status; /* SDMA + 0x7c */
- u32 PTDDebug; /* SDMA + 0x80 */
-};
-
-/* GPT */
-struct mpc52xx_gpt {
- u32 mode; /* GPTx + 0x00 */
- u32 count; /* GPTx + 0x04 */
- u32 pwm; /* GPTx + 0x08 */
- u32 status; /* GPTx + 0X0c */
-};
-
-/* RTC */
-struct mpc52xx_rtc {
- u32 time_set; /* RTC + 0x00 */
- u32 date_set; /* RTC + 0x04 */
- u32 stopwatch; /* RTC + 0x08 */
- u32 int_enable; /* RTC + 0x0c */
- u32 time; /* RTC + 0x10 */
- u32 date; /* RTC + 0x14 */
- u32 stopwatch_intr; /* RTC + 0x18 */
- u32 bus_error; /* RTC + 0x1c */
- u32 dividers; /* RTC + 0x20 */
-};
-
-/* GPIO */
-struct mpc52xx_gpio {
- u32 port_config; /* GPIO + 0x00 */
- u32 simple_gpioe; /* GPIO + 0x04 */
- u32 simple_ode; /* GPIO + 0x08 */
- u32 simple_ddr; /* GPIO + 0x0c */
- u32 simple_dvo; /* GPIO + 0x10 */
- u32 simple_ival; /* GPIO + 0x14 */
- u8 outo_gpioe; /* GPIO + 0x18 */
- u8 reserved1[3]; /* GPIO + 0x19 */
- u8 outo_dvo; /* GPIO + 0x1c */
- u8 reserved2[3]; /* GPIO + 0x1d */
- u8 sint_gpioe; /* GPIO + 0x20 */
- u8 reserved3[3]; /* GPIO + 0x21 */
- u8 sint_ode; /* GPIO + 0x24 */
- u8 reserved4[3]; /* GPIO + 0x25 */
- u8 sint_ddr; /* GPIO + 0x28 */
- u8 reserved5[3]; /* GPIO + 0x29 */
- u8 sint_dvo; /* GPIO + 0x2c */
- u8 reserved6[3]; /* GPIO + 0x2d */
- u8 sint_inten; /* GPIO + 0x30 */
- u8 reserved7[3]; /* GPIO + 0x31 */
- u16 sint_itype; /* GPIO + 0x34 */
- u16 reserved8; /* GPIO + 0x36 */
- u8 gpio_control; /* GPIO + 0x38 */
- u8 reserved9[3]; /* GPIO + 0x39 */
- u8 sint_istat; /* GPIO + 0x3c */
- u8 sint_ival; /* GPIO + 0x3d */
- u8 bus_errs; /* GPIO + 0x3e */
- u8 reserved10; /* GPIO + 0x3f */
-};
-
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
-#define MPC52xx_GPIO_PCI_DIS (1<<15)
-
-/* GPIO with WakeUp*/
-struct mpc52xx_gpio_wkup {
- u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
- u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
- u8 wkup_ode; /* GPIO_WKUP + 0x04 */
- u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
- u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
- u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
- u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
- u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
- u8 wkup_inten; /* GPIO_WKUP + 0x10 */
- u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
- u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
- u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
- u16 wkup_itype; /* GPIO_WKUP + 0x18 */
- u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
- u8 wkup_maste; /* GPIO_WKUP + 0x1C */
- u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
- u8 wkup_ival; /* GPIO_WKUP + 0x20 */
- u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
- u8 wkup_istat; /* GPIO_WKUP + 0x24 */
- u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
-};
-
-/* XLB Bus control */
-struct mpc52xx_xlb {
- u8 reserved[0x40];
- u32 config; /* XLB + 0x40 */
- u32 version; /* XLB + 0x44 */
- u32 status; /* XLB + 0x48 */
- u32 int_enable; /* XLB + 0x4c */
- u32 addr_capture; /* XLB + 0x50 */
- u32 bus_sig_capture; /* XLB + 0x54 */
- u32 addr_timeout; /* XLB + 0x58 */
- u32 data_timeout; /* XLB + 0x5c */
- u32 bus_act_timeout; /* XLB + 0x60 */
- u32 master_pri_enable; /* XLB + 0x64 */
- u32 master_priority; /* XLB + 0x68 */
- u32 base_address; /* XLB + 0x6c */
- u32 snoop_window; /* XLB + 0x70 */
-};
-
-#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
-#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
-
-/* Clock Distribution control */
-struct mpc52xx_cdm {
- u32 jtag_id; /* CDM + 0x00 reg0 read only */
- u32 rstcfg; /* CDM + 0x04 reg1 read only */
- u32 breadcrumb; /* CDM + 0x08 reg2 */
-
- u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
- u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
- u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
- u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
-
- u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
- u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
- u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
-
- u32 clk_enables; /* CDM + 0x14 reg5 */
-
- u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
- u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
-
- u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
- u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
- u8 reserved1; /* CDM + 0x1e reg7 byte2 */
- u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
-
- u8 soft_reset; /* CDM + 0x20 u8 byte0 */
- u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
- u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
-
- u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
- u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
- u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
- u8 reserved3; /* CDM + 0x27 reg9 byte3 */
-
- u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
- u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
-
- u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
- u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
-
- u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
- u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
-
- u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
- u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Prototypes for MPC52xx syslib */
-/* ========================================================================= */
-
-#ifndef __ASSEMBLY__
-
-extern void mpc52xx_init_irq(void);
-extern int mpc52xx_get_irq(void);
-
-extern unsigned long mpc52xx_find_end_of_memory(void);
-extern void mpc52xx_set_bat(void);
-extern void mpc52xx_map_io(void);
-extern void mpc52xx_restart(char *cmd);
-extern void mpc52xx_halt(void);
-extern void mpc52xx_power_off(void);
-extern void mpc52xx_progress(char *s, unsigned short hex);
-extern void mpc52xx_calibrate_decr(void);
-
-extern void mpc52xx_find_bridges(void);
-
-extern void mpc52xx_setup_cpu(void);
-
-
-
- /* Matching of PSC function */
-struct mpc52xx_psc_func {
- int id;
- char *func;
-};
-
-extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
-extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
- /* This array is to be defined in platform file */
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Platform configuration */
-/* ========================================================================= */
-
-/* The U-Boot platform information struct */
-extern bd_t __res;
-
-/* Platform options */
-#if defined(CONFIG_LITE5200)
-#include <platforms/lite5200.h>
-#endif
-
-
-#endif /* __ASM_MPC52xx_H__ */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
deleted file mode 100644
index 39fcd02cd4e..00000000000
--- a/include/asm-ppc/mpc52xx_psc.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx_psc.h
- *
- * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
- * PSCs. Theses are shared between multiple drivers since a PSC can be
- * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based/Extracted from some header of the 2.4 originally written by
- * Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_PSC_H__
-#define __ASM_MPC52xx_PSC_H__
-
-#include <asm/types.h>
-
-/* Max number of PSCs */
-#define MPC52xx_PSC_MAXNUM 6
-
-/* Programmable Serial Controller (PSC) status register bits */
-#define MPC52xx_PSC_SR_UNEX_RX 0x0001
-#define MPC52xx_PSC_SR_DATA_VAL 0x0002
-#define MPC52xx_PSC_SR_DATA_OVR 0x0004
-#define MPC52xx_PSC_SR_CMDSEND 0x0008
-#define MPC52xx_PSC_SR_CDE 0x0080
-#define MPC52xx_PSC_SR_RXRDY 0x0100
-#define MPC52xx_PSC_SR_RXFULL 0x0200
-#define MPC52xx_PSC_SR_TXRDY 0x0400
-#define MPC52xx_PSC_SR_TXEMP 0x0800
-#define MPC52xx_PSC_SR_OE 0x1000
-#define MPC52xx_PSC_SR_PE 0x2000
-#define MPC52xx_PSC_SR_FE 0x4000
-#define MPC52xx_PSC_SR_RB 0x8000
-
-/* PSC Command values */
-#define MPC52xx_PSC_RX_ENABLE 0x0001
-#define MPC52xx_PSC_RX_DISABLE 0x0002
-#define MPC52xx_PSC_TX_ENABLE 0x0004
-#define MPC52xx_PSC_TX_DISABLE 0x0008
-#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010
-#define MPC52xx_PSC_RST_RX 0x0020
-#define MPC52xx_PSC_RST_TX 0x0030
-#define MPC52xx_PSC_RST_ERR_STAT 0x0040
-#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050
-#define MPC52xx_PSC_START_BRK 0x0060
-#define MPC52xx_PSC_STOP_BRK 0x0070
-
-/* PSC TxRx FIFO status bits */
-#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040
-#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020
-#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010
-#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008
-#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004
-#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002
-#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001
-
-/* PSC interrupt mask bits */
-#define MPC52xx_PSC_IMR_TXRDY 0x0100
-#define MPC52xx_PSC_IMR_RXRDY 0x0200
-#define MPC52xx_PSC_IMR_DB 0x0400
-#define MPC52xx_PSC_IMR_IPC 0x8000
-
-/* PSC input port change bit */
-#define MPC52xx_PSC_CTS 0x01
-#define MPC52xx_PSC_DCD 0x02
-#define MPC52xx_PSC_D_CTS 0x10
-#define MPC52xx_PSC_D_DCD 0x20
-
-/* PSC mode fields */
-#define MPC52xx_PSC_MODE_5_BITS 0x00
-#define MPC52xx_PSC_MODE_6_BITS 0x01
-#define MPC52xx_PSC_MODE_7_BITS 0x02
-#define MPC52xx_PSC_MODE_8_BITS 0x03
-#define MPC52xx_PSC_MODE_BITS_MASK 0x03
-#define MPC52xx_PSC_MODE_PAREVEN 0x00
-#define MPC52xx_PSC_MODE_PARODD 0x04
-#define MPC52xx_PSC_MODE_PARFORCE 0x08
-#define MPC52xx_PSC_MODE_PARNONE 0x10
-#define MPC52xx_PSC_MODE_ERR 0x20
-#define MPC52xx_PSC_MODE_FFULL 0x40
-#define MPC52xx_PSC_MODE_RXRTS 0x80
-
-#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00
-#define MPC52xx_PSC_MODE_ONE_STOP 0x07
-#define MPC52xx_PSC_MODE_TWO_STOP 0x0f
-
-#define MPC52xx_PSC_RFNUM_MASK 0x01ff
-
-
-/* Structure of the hardware registers */
-struct mpc52xx_psc {
- u8 mode; /* PSC + 0x00 */
- u8 reserved0[3];
- union { /* PSC + 0x04 */
- u16 status;
- u16 clock_select;
- } sr_csr;
-#define mpc52xx_psc_status sr_csr.status
-#define mpc52xx_psc_clock_select sr_csr.clock_select
- u16 reserved1;
- u8 command; /* PSC + 0x08 */
- u8 reserved2[3];
- union { /* PSC + 0x0c */
- u8 buffer_8;
- u16 buffer_16;
- u32 buffer_32;
- } buffer;
-#define mpc52xx_psc_buffer_8 buffer.buffer_8
-#define mpc52xx_psc_buffer_16 buffer.buffer_16
-#define mpc52xx_psc_buffer_32 buffer.buffer_32
- union { /* PSC + 0x10 */
- u8 ipcr;
- u8 acr;
- } ipcr_acr;
-#define mpc52xx_psc_ipcr ipcr_acr.ipcr
-#define mpc52xx_psc_acr ipcr_acr.acr
- u8 reserved3[3];
- union { /* PSC + 0x14 */
- u16 isr;
- u16 imr;
- } isr_imr;
-#define mpc52xx_psc_isr isr_imr.isr
-#define mpc52xx_psc_imr isr_imr.imr
- u16 reserved4;
- u8 ctur; /* PSC + 0x18 */
- u8 reserved5[3];
- u8 ctlr; /* PSC + 0x1c */
- u8 reserved6[3];
- u32 ccr; /* PSC + 0x20 */
- u32 ac97_slots; /* PSC + 0x24 */
- u32 ac97_cmd; /* PSC + 0x28 */
- u32 ac97_data; /* PSC + 0x2c */
- u8 ivr; /* PSC + 0x30 */
- u8 reserved8[3];
- u8 ip; /* PSC + 0x34 */
- u8 reserved9[3];
- u8 op1; /* PSC + 0x38 */
- u8 reserved10[3];
- u8 op0; /* PSC + 0x3c */
- u8 reserved11[3];
- u32 sicr; /* PSC + 0x40 */
- u8 ircr1; /* PSC + 0x44 */
- u8 reserved13[3];
- u8 ircr2; /* PSC + 0x44 */
- u8 reserved14[3];
- u8 irsdr; /* PSC + 0x4c */
- u8 reserved15[3];
- u8 irmdr; /* PSC + 0x50 */
- u8 reserved16[3];
- u8 irfdr; /* PSC + 0x54 */
- u8 reserved17[3];
-};
-
-struct mpc52xx_psc_fifo {
- u16 rfnum; /* PSC + 0x58 */
- u16 reserved18;
- u16 tfnum; /* PSC + 0x5c */
- u16 reserved19;
- u32 rfdata; /* PSC + 0x60 */
- u16 rfstat; /* PSC + 0x64 */
- u16 reserved20;
- u8 rfcntl; /* PSC + 0x68 */
- u8 reserved21[5];
- u16 rfalarm; /* PSC + 0x6e */
- u16 reserved22;
- u16 rfrptr; /* PSC + 0x72 */
- u16 reserved23;
- u16 rfwptr; /* PSC + 0x76 */
- u16 reserved24;
- u16 rflrfptr; /* PSC + 0x7a */
- u16 reserved25;
- u16 rflwfptr; /* PSC + 0x7e */
- u32 tfdata; /* PSC + 0x80 */
- u16 tfstat; /* PSC + 0x84 */
- u16 reserved26;
- u8 tfcntl; /* PSC + 0x88 */
- u8 reserved27[5];
- u16 tfalarm; /* PSC + 0x8e */
- u16 reserved28;
- u16 tfrptr; /* PSC + 0x92 */
- u16 reserved29;
- u16 tfwptr; /* PSC + 0x96 */
- u16 reserved30;
- u16 tflrfptr; /* PSC + 0x9a */
- u16 reserved31;
- u16 tflwfptr; /* PSC + 0x9e */
-};
-
-
-#endif /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
deleted file mode 100644
index 402ba15c2e8..00000000000
--- a/include/asm-ppc/mpc8260.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each. Rather than change every
- * file that has to include MPC8260 configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_MPC8260_H__
-#define __ASM_PPC_MPC8260_H__
-
-
-#ifdef CONFIG_8260
-
-#ifdef CONFIG_EST8260
-#include <platforms/est8260.h>
-#endif
-
-#ifdef CONFIG_SBC82xx
-#include <platforms/sbc82xx.h>
-#endif
-
-#ifdef CONFIG_SBS8260
-#include <platforms/sbs8260.h>
-#endif
-
-#ifdef CONFIG_RPX8260
-#include <platforms/rpx8260.h>
-#endif
-
-#ifdef CONFIG_WILLOW
-#include <platforms/willow.h>
-#endif
-
-#ifdef CONFIG_TQM8260
-#include <platforms/tqm8260.h>
-#endif
-
-#ifdef CONFIG_PCI_8260
-#include <syslib/m82xx_pci.h>
-#endif
-
-/* Make sure the memory translation stuff is there if PCI not used.
- */
-#ifndef _IO_BASE
-#define _IO_BASE 0
-#endif
-
-#ifndef _ISA_MEM_BASE
-#define _ISA_MEM_BASE 0
-#endif
-
-#ifndef PCI_DRAM_OFFSET
-#define PCI_DRAM_OFFSET 0
-#endif
-
-/* Map 256MB I/O region
- */
-#ifndef IO_PHYS_ADDR
-#define IO_PHYS_ADDR 0xe0000000
-#endif
-#ifndef IO_VIRT_ADDR
-#define IO_VIRT_ADDR IO_PHYS_ADDR
-#endif
-
-enum ppc_sys_devices {
- MPC82xx_CPM_FCC1,
- MPC82xx_CPM_FCC2,
- MPC82xx_CPM_FCC3,
- MPC82xx_CPM_I2C,
- MPC82xx_CPM_SCC1,
- MPC82xx_CPM_SCC2,
- MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4,
- MPC82xx_CPM_SPI,
- MPC82xx_CPM_MCC1,
- MPC82xx_CPM_MCC2,
- MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2,
- MPC82xx_CPM_USB,
- MPC82xx_SEC1,
- MPC82xx_MDIO_BB,
- NUM_PPC_SYS_DEVS,
-};
-
-#ifndef __ASSEMBLY__
-/* The "residual" data board information structure the boot loader
- * hands to us.
- */
-extern unsigned char __res[];
-#endif
-
-#ifndef BOARD_CHIP_NAME
-#define BOARD_CHIP_NAME ""
-#endif
-
-#endif /* CONFIG_8260 */
-#endif /* !__ASM_PPC_MPC8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260_pci9.h b/include/asm-ppc/mpc8260_pci9.h
deleted file mode 100644
index 9f7176881c5..00000000000
--- a/include/asm-ppc/mpc8260_pci9.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* include/asm-ppc/mpc8260_pci9.h
- *
- * Undefine the PCI read* and in* macros so we can define them as functions
- * that implement the workaround for the MPC8260 device erratum PCI 9.
- *
- * This header file should only be included at the end of include/asm-ppc/io.h
- * and never included directly anywhere else.
- *
- * Author: andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_IO_H
-#error "Do not include mpc8260_pci9.h directly."
-#endif
-
-#ifdef __KERNEL__
-#ifndef __CONFIG_8260_PCI9_DEFS
-#define __CONFIG_8260_PCI9_DEFS
-
-#undef readb
-#undef readw
-#undef readl
-#undef insb
-#undef insw
-#undef insl
-#undef inb
-#undef inw
-#undef inl
-#undef memcpy_fromio
-
-extern int readb(volatile unsigned char *addr);
-extern int readw(volatile unsigned short *addr);
-extern unsigned readl(volatile unsigned *addr);
-extern void insb(unsigned port, void *buf, int ns);
-extern void insw(unsigned port, void *buf, int ns);
-extern void insl(unsigned port, void *buf, int nl);
-extern int inb(unsigned port);
-extern int inw(unsigned port);
-extern unsigned inl(unsigned port);
-extern void *memcpy_fromio(void *dest, unsigned long src, size_t count);
-
-#endif /* !__CONFIG_8260_PCI9_DEFS */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
deleted file mode 100644
index b9e3060b027..00000000000
--- a/include/asm-ppc/mpc8xx.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* This is the single file included by all MPC8xx build options.
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each. Rather than change every
- * file that has to include MPC8xx configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __CONFIG_8xx_DEFS
-#define __CONFIG_8xx_DEFS
-
-
-#ifdef CONFIG_8xx
-
-#ifdef CONFIG_MBX
-#include <platforms/mbx.h>
-#endif
-
-#ifdef CONFIG_FADS
-#include <platforms/fads.h>
-#endif
-
-#ifdef CONFIG_RPXLITE
-#include <platforms/rpxlite.h>
-#endif
-
-#ifdef CONFIG_BSEIP
-#include <platforms/bseip.h>
-#endif
-
-#ifdef CONFIG_RPXCLASSIC
-#include <platforms/rpxclassic.h>
-#endif
-
-#if defined(CONFIG_TQM8xxL)
-#include <platforms/tqm8xx.h>
-#endif
-
-#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
-#include <platforms/ivms8.h>
-#endif
-
-#if defined(CONFIG_HERMES_PRO)
-#include <platforms/hermes.h>
-#endif
-
-#if defined(CONFIG_IP860)
-#include <platforms/ip860.h>
-#endif
-
-#if defined(CONFIG_LWMON)
-#include <platforms/lwmon.h>
-#endif
-
-#if defined(CONFIG_PCU_E)
-#include <platforms/pcu_e.h>
-#endif
-
-#if defined(CONFIG_CCM)
-#include <platforms/ccm.h>
-#endif
-
-#if defined(CONFIG_LANTEC)
-#include <platforms/lantec.h>
-#endif
-
-/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
- * use the same memory map.
- */
-#if 0
-#if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR)
-#define _IO_BASE PCI_ISA_IO_ADDR
-#define _ISA_MEM_BASE PCI_ISA_MEM_ADDR
-#define PCI_DRAM_OFFSET 0x80000000
-#else
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-#else
-#if !defined(_IO_BASE) /* defined in board specific header */
-#define _IO_BASE 0
-#endif
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-
-#ifndef __ASSEMBLY__
-/* The "residual" data board information structure the boot loader
- * hands to us.
- */
-extern unsigned char __res[];
-
-struct pt_regs;
-
-enum ppc_sys_devices {
- MPC8xx_CPM_FEC1,
- MPC8xx_CPM_FEC2,
- MPC8xx_CPM_I2C,
- MPC8xx_CPM_SCC1,
- MPC8xx_CPM_SCC2,
- MPC8xx_CPM_SCC3,
- MPC8xx_CPM_SCC4,
- MPC8xx_CPM_SPI,
- MPC8xx_CPM_MCC1,
- MPC8xx_CPM_MCC2,
- MPC8xx_CPM_SMC1,
- MPC8xx_CPM_SMC2,
- MPC8xx_CPM_USB,
- MPC8xx_MDIO_FEC,
- NUM_PPC_SYS_DEVS,
-};
-
-#define PPC_PIN_SIZE (24 * 1024 * 1024) /* 24Mbytes of data pinned */
-
-#ifndef BOARD_CHIP_NAME
-#define BOARD_CHIP_NAME ""
-#endif
-
-#endif /* !__ASSEMBLY__ */
-#endif /* CONFIG_8xx */
-#endif /* __CONFIG_8xx_DEFS */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h
deleted file mode 100644
index 2963d6aa3ea..00000000000
--- a/include/asm-ppc/mv64x60.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * include/asm-ppc/mv64x60.h
- *
- * Prototypes, etc. for the Marvell/Galileo MV64x60 host bridge routines.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_MV64x60_H
-#define __ASMPPC_MV64x60_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mv64x60_defs.h>
-
-struct platform_device;
-
-extern u8 mv64x60_pci_exclude_bridge;
-
-extern spinlock_t mv64x60_lock;
-
-/* 32-bit Window table entry defines */
-#define MV64x60_CPU2MEM_0_WIN 0
-#define MV64x60_CPU2MEM_1_WIN 1
-#define MV64x60_CPU2MEM_2_WIN 2
-#define MV64x60_CPU2MEM_3_WIN 3
-#define MV64x60_CPU2DEV_0_WIN 4
-#define MV64x60_CPU2DEV_1_WIN 5
-#define MV64x60_CPU2DEV_2_WIN 6
-#define MV64x60_CPU2DEV_3_WIN 7
-#define MV64x60_CPU2BOOT_WIN 8
-#define MV64x60_CPU2PCI0_IO_WIN 9
-#define MV64x60_CPU2PCI0_MEM_0_WIN 10
-#define MV64x60_CPU2PCI0_MEM_1_WIN 11
-#define MV64x60_CPU2PCI0_MEM_2_WIN 12
-#define MV64x60_CPU2PCI0_MEM_3_WIN 13
-#define MV64x60_CPU2PCI1_IO_WIN 14
-#define MV64x60_CPU2PCI1_MEM_0_WIN 15
-#define MV64x60_CPU2PCI1_MEM_1_WIN 16
-#define MV64x60_CPU2PCI1_MEM_2_WIN 17
-#define MV64x60_CPU2PCI1_MEM_3_WIN 18
-#define MV64x60_CPU2SRAM_WIN 19
-#define MV64x60_CPU2PCI0_IO_REMAP_WIN 20
-#define MV64x60_CPU2PCI1_IO_REMAP_WIN 21
-#define MV64x60_CPU_PROT_0_WIN 22
-#define MV64x60_CPU_PROT_1_WIN 23
-#define MV64x60_CPU_PROT_2_WIN 24
-#define MV64x60_CPU_PROT_3_WIN 25
-#define MV64x60_CPU_SNOOP_0_WIN 26
-#define MV64x60_CPU_SNOOP_1_WIN 27
-#define MV64x60_CPU_SNOOP_2_WIN 28
-#define MV64x60_CPU_SNOOP_3_WIN 29
-#define MV64x60_PCI02MEM_REMAP_0_WIN 30
-#define MV64x60_PCI02MEM_REMAP_1_WIN 31
-#define MV64x60_PCI02MEM_REMAP_2_WIN 32
-#define MV64x60_PCI02MEM_REMAP_3_WIN 33
-#define MV64x60_PCI12MEM_REMAP_0_WIN 34
-#define MV64x60_PCI12MEM_REMAP_1_WIN 35
-#define MV64x60_PCI12MEM_REMAP_2_WIN 36
-#define MV64x60_PCI12MEM_REMAP_3_WIN 37
-#define MV64x60_ENET2MEM_0_WIN 38
-#define MV64x60_ENET2MEM_1_WIN 39
-#define MV64x60_ENET2MEM_2_WIN 40
-#define MV64x60_ENET2MEM_3_WIN 41
-#define MV64x60_ENET2MEM_4_WIN 42
-#define MV64x60_ENET2MEM_5_WIN 43
-#define MV64x60_MPSC2MEM_0_WIN 44
-#define MV64x60_MPSC2MEM_1_WIN 45
-#define MV64x60_MPSC2MEM_2_WIN 46
-#define MV64x60_MPSC2MEM_3_WIN 47
-#define MV64x60_IDMA2MEM_0_WIN 48
-#define MV64x60_IDMA2MEM_1_WIN 49
-#define MV64x60_IDMA2MEM_2_WIN 50
-#define MV64x60_IDMA2MEM_3_WIN 51
-#define MV64x60_IDMA2MEM_4_WIN 52
-#define MV64x60_IDMA2MEM_5_WIN 53
-#define MV64x60_IDMA2MEM_6_WIN 54
-#define MV64x60_IDMA2MEM_7_WIN 55
-
-#define MV64x60_32BIT_WIN_COUNT 56
-
-/* 64-bit Window table entry defines */
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_WIN 0
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_WIN 1
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_WIN 2
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_WIN 3
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_WIN 4
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_WIN 5
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_WIN 6
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_WIN 7
-#define MV64x60_PCI02MEM_ACC_CNTL_0_WIN 8
-#define MV64x60_PCI02MEM_ACC_CNTL_1_WIN 9
-#define MV64x60_PCI02MEM_ACC_CNTL_2_WIN 10
-#define MV64x60_PCI02MEM_ACC_CNTL_3_WIN 11
-#define MV64x60_PCI12MEM_ACC_CNTL_0_WIN 12
-#define MV64x60_PCI12MEM_ACC_CNTL_1_WIN 13
-#define MV64x60_PCI12MEM_ACC_CNTL_2_WIN 14
-#define MV64x60_PCI12MEM_ACC_CNTL_3_WIN 15
-#define MV64x60_PCI02MEM_SNOOP_0_WIN 16
-#define MV64x60_PCI02MEM_SNOOP_1_WIN 17
-#define MV64x60_PCI02MEM_SNOOP_2_WIN 18
-#define MV64x60_PCI02MEM_SNOOP_3_WIN 19
-#define MV64x60_PCI12MEM_SNOOP_0_WIN 20
-#define MV64x60_PCI12MEM_SNOOP_1_WIN 21
-#define MV64x60_PCI12MEM_SNOOP_2_WIN 22
-#define MV64x60_PCI12MEM_SNOOP_3_WIN 23
-
-#define MV64x60_64BIT_WIN_COUNT 24
-
-/*
- * Define a structure that's used to pass in config information to the
- * core routines.
- */
-struct mv64x60_pci_window {
- u32 cpu_base;
- u32 pci_base_hi;
- u32 pci_base_lo;
- u32 size;
- u32 swap;
-};
-
-struct mv64x60_pci_info {
- u8 enable_bus; /* allow access to this PCI bus? */
-
- struct mv64x60_pci_window pci_io;
- struct mv64x60_pci_window pci_mem[3];
-
- u32 acc_cntl_options[MV64x60_CPU2MEM_WINDOWS];
- u32 snoop_options[MV64x60_CPU2MEM_WINDOWS];
- u16 pci_cmd_bits;
- u16 latency_timer;
-};
-
-struct mv64x60_setup_info {
- u32 phys_reg_base;
- u32 window_preserve_mask_32_hi;
- u32 window_preserve_mask_32_lo;
- u32 window_preserve_mask_64;
-
- u32 cpu_prot_options[MV64x60_CPU2MEM_WINDOWS];
- u32 cpu_snoop_options[MV64x60_CPU2MEM_WINDOWS];
- u32 enet_options[MV64x60_CPU2MEM_WINDOWS];
- u32 mpsc_options[MV64x60_CPU2MEM_WINDOWS];
- u32 idma_options[MV64x60_CPU2MEM_WINDOWS];
-
- struct mv64x60_pci_info pci_0;
- struct mv64x60_pci_info pci_1;
-};
-
-/* Define what the top bits in the extra member of a window entry means. */
-#define MV64x60_EXTRA_INVALID 0x00000000
-#define MV64x60_EXTRA_CPUWIN_ENAB 0x10000000
-#define MV64x60_EXTRA_CPUPROT_ENAB 0x20000000
-#define MV64x60_EXTRA_ENET_ENAB 0x30000000
-#define MV64x60_EXTRA_MPSC_ENAB 0x40000000
-#define MV64x60_EXTRA_IDMA_ENAB 0x50000000
-#define MV64x60_EXTRA_PCIACC_ENAB 0x60000000
-
-#define MV64x60_EXTRA_MASK 0xf0000000
-
-/*
- * Define the 'handle' struct that will be passed between the 64x60 core
- * code and the platform-specific code that will use it. The handle
- * will contain pointers to chip-specific routines & information.
- */
-struct mv64x60_32bit_window {
- u32 base_reg;
- u32 size_reg;
- u8 base_bits;
- u8 size_bits;
- u32 (*get_from_field)(u32 val, u32 num_bits);
- u32 (*map_to_field)(u32 val, u32 num_bits);
- u32 extra;
-};
-
-struct mv64x60_64bit_window {
- u32 base_hi_reg;
- u32 base_lo_reg;
- u32 size_reg;
- u8 base_lo_bits;
- u8 size_bits;
- u32 (*get_from_field)(u32 val, u32 num_bits);
- u32 (*map_to_field)(u32 val, u32 num_bits);
- u32 extra;
-};
-
-typedef struct mv64x60_handle mv64x60_handle_t;
-struct mv64x60_chip_info {
- u32 (*translate_size)(u32 base, u32 size, u32 num_bits);
- u32 (*untranslate_size)(u32 base, u32 size, u32 num_bits);
- void (*set_pci2mem_window)(struct pci_controller *hose, u32 bus,
- u32 window, u32 base);
- void (*set_pci2regs_window)(struct mv64x60_handle *bh,
- struct pci_controller *hose, u32 bus, u32 base);
- u32 (*is_enabled_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*enable_window_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_window_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*enable_window_64bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_window_64bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_all_windows)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si);
- void (*config_io2mem_windows)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
- void (*set_mpsc2regs_window)(struct mv64x60_handle *bh, u32 base);
- void (*chip_specific_init)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si);
-
- struct mv64x60_32bit_window *window_tab_32bit;
- struct mv64x60_64bit_window *window_tab_64bit;
-};
-
-struct mv64x60_handle {
- u32 type; /* type of bridge */
- u32 rev; /* revision of bridge */
- void __iomem *v_base;/* virtual base addr of bridge regs */
- phys_addr_t p_base; /* physical base addr of bridge regs */
-
- u32 pci_mode_a; /* pci 0 mode: conventional pci, pci-x*/
- u32 pci_mode_b; /* pci 1 mode: conventional pci, pci-x*/
-
- u32 io_base_a; /* vaddr of pci 0's I/O space */
- u32 io_base_b; /* vaddr of pci 1's I/O space */
-
- struct pci_controller *hose_a;
- struct pci_controller *hose_b;
-
- struct mv64x60_chip_info *ci; /* chip/bridge-specific info */
-};
-
-
-/* Define I/O routines for accessing registers on the 64x60 bridge. */
-extern inline void
-mv64x60_write(struct mv64x60_handle *bh, u32 offset, u32 val) {
- ulong flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- out_le32(bh->v_base + offset, val);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-extern inline u32
-mv64x60_read(struct mv64x60_handle *bh, u32 offset) {
- ulong flags;
- u32 reg;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- reg = in_le32(bh->v_base + offset);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- return reg;
-}
-
-extern inline void
-mv64x60_modify(struct mv64x60_handle *bh, u32 offs, u32 data, u32 mask)
-{
- u32 reg;
- ulong flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- reg = in_le32(bh->v_base + offs) & (~mask);
- reg |= data & mask;
- out_le32(bh->v_base + offs, reg);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-#define mv64x60_set_bits(bh, offs, bits) mv64x60_modify(bh, offs, ~0, bits)
-#define mv64x60_clr_bits(bh, offs, bits) mv64x60_modify(bh, offs, 0, bits)
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-#define MV64XXX_DEV_NAME "mv64xxx"
-
-struct mv64xxx_pdata {
- u32 hs_reg_valid;
-};
-#endif
-
-/* Externally visible function prototypes */
-int mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si);
-u32 mv64x60_get_mem_size(u32 bridge_base, u32 chip_type);
-void mv64x60_early_init(struct mv64x60_handle *bh,
- struct mv64x60_setup_info *si);
-void mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr,
- u32 cfg_data, struct pci_controller **hose);
-int mv64x60_get_type(struct mv64x60_handle *bh);
-int mv64x60_setup_for_chip(struct mv64x60_handle *bh);
-void __iomem *mv64x60_get_bridge_vbase(void);
-u32 mv64x60_get_bridge_type(void);
-u32 mv64x60_get_bridge_rev(void);
-void mv64x60_get_mem_windows(struct mv64x60_handle *bh,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
- struct mv64x60_setup_info *si,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
- struct mv64x60_pci_info *pi, u32 bus);
-void mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
- struct pci_controller *hose, struct mv64x60_pci_info *pi, u32 bus,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_resources(struct pci_controller *hose,
- struct mv64x60_pci_info *pi, u32 io_base);
-void mv64x60_config_pci_params(struct pci_controller *hose,
- struct mv64x60_pci_info *pi);
-void mv64x60_pd_fixup(struct mv64x60_handle *bh,
- struct platform_device *pd_devs[], u32 entries);
-void mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
- u32 *base, u32 *size);
-void mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, u32 base,
- u32 size, u32 other_bits);
-void mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
- u32 *base_hi, u32 *base_lo, u32 *size);
-void mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
- u32 base_hi, u32 base_lo, u32 size, u32 other_bits);
-void mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus);
-int mv64x60_pci_exclude_device(u8 bus, u8 devfn);
-
-
-void gt64260_init_irq(void);
-int gt64260_get_irq(void);
-void mv64360_init_irq(void);
-int mv64360_get_irq(void);
-
-u32 mv64x60_mask(u32 val, u32 num_bits);
-u32 mv64x60_shift_left(u32 val, u32 num_bits);
-u32 mv64x60_shift_right(u32 val, u32 num_bits);
-u32 mv64x60_calc_mem_size(struct mv64x60_handle *bh,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-
-void mv64x60_progress_init(u32 base);
-void mv64x60_mpsc_progress(char *s, unsigned short hex);
-
-extern struct mv64x60_32bit_window
- gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT];
-extern struct mv64x60_64bit_window
- gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT];
-extern struct mv64x60_32bit_window
- mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT];
-extern struct mv64x60_64bit_window
- mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT];
-
-#endif /* __ASMPPC_MV64x60_H */
diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h
deleted file mode 100644
index 5b0704a3e6e..00000000000
--- a/include/asm-ppc/mv64x60_defs.h
+++ /dev/null
@@ -1,976 +0,0 @@
-/*
- * include/asm-ppc/mv64x60_defs.h
- *
- * Register definitions for the Marvell/Galileo GT64260, MV64360, etc.
- * host bridges.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_MV64x60_DEFS_H
-#define __ASMPPC_MV64x60_DEFS_H
-
-/*
- * Define the Marvell bridges that are supported
- */
-#define MV64x60_TYPE_INVALID 0
-#define MV64x60_TYPE_GT64260A 1
-#define MV64x60_TYPE_GT64260B 2
-#define MV64x60_TYPE_MV64360 3
-#define MV64x60_TYPE_MV64361 4
-#define MV64x60_TYPE_MV64362 5
-#define MV64x60_TYPE_MV64460 6
-
-
-/* Revisions of each supported chip */
-#define GT64260_REV_A 0x10
-#define GT64260_REV_B 0x20
-#define MV64360 0x01
-#define MV64460 0x01
-
-/* Minimum window size supported by 64260 is 1MB */
-#define GT64260_WINDOW_SIZE_MIN 0x00100000
-#define MV64360_WINDOW_SIZE_MIN 0x00010000
-
-#define MV64x60_TCLK_FREQ_MAX 133333333U
-
-/* IRQ's for embedded controllers */
-#define MV64x60_IRQ_DEV 1
-#define MV64x60_IRQ_CPU_ERR 3
-#define MV64x60_IRQ_TIMER_0_1 8
-#define MV64x60_IRQ_TIMER_2_3 9
-#define MV64x60_IRQ_TIMER_4_5 10
-#define MV64x60_IRQ_TIMER_6_7 11
-#define MV64x60_IRQ_P1_GPP_0_7 24
-#define MV64x60_IRQ_P1_GPP_8_15 25
-#define MV64x60_IRQ_P1_GPP_16_23 26
-#define MV64x60_IRQ_P1_GPP_24_31 27
-#define MV64x60_IRQ_DOORBELL 28
-#define MV64x60_IRQ_ETH_0 32
-#define MV64x60_IRQ_ETH_1 33
-#define MV64x60_IRQ_ETH_2 34
-#define MV64x60_IRQ_SDMA_0 36
-#define MV64x60_IRQ_I2C 37
-#define MV64x60_IRQ_BRG 39
-#define MV64x60_IRQ_MPSC_0 40
-#define MV64x60_IRQ_MPSC_1 42
-#define MV64x60_IRQ_COMM 43
-#define MV64x60_IRQ_P0_GPP_0_7 56
-#define MV64x60_IRQ_P0_GPP_8_15 57
-#define MV64x60_IRQ_P0_GPP_16_23 58
-#define MV64x60_IRQ_P0_GPP_24_31 59
-
-#define MV64360_IRQ_PCI0 12
-#define MV64360_IRQ_SRAM_PAR_ERR 13
-#define MV64360_IRQ_PCI1 16
-#define MV64360_IRQ_SDMA_1 38
-
-#define MV64x60_IRQ_GPP0 64
-#define MV64x60_IRQ_GPP1 65
-#define MV64x60_IRQ_GPP2 66
-#define MV64x60_IRQ_GPP3 67
-#define MV64x60_IRQ_GPP4 68
-#define MV64x60_IRQ_GPP5 69
-#define MV64x60_IRQ_GPP6 70
-#define MV64x60_IRQ_GPP7 71
-#define MV64x60_IRQ_GPP8 72
-#define MV64x60_IRQ_GPP9 73
-#define MV64x60_IRQ_GPP10 74
-#define MV64x60_IRQ_GPP11 75
-#define MV64x60_IRQ_GPP12 76
-#define MV64x60_IRQ_GPP13 77
-#define MV64x60_IRQ_GPP14 78
-#define MV64x60_IRQ_GPP15 79
-#define MV64x60_IRQ_GPP16 80
-#define MV64x60_IRQ_GPP17 81
-#define MV64x60_IRQ_GPP18 82
-#define MV64x60_IRQ_GPP19 83
-#define MV64x60_IRQ_GPP20 84
-#define MV64x60_IRQ_GPP21 85
-#define MV64x60_IRQ_GPP22 86
-#define MV64x60_IRQ_GPP23 87
-#define MV64x60_IRQ_GPP24 88
-#define MV64x60_IRQ_GPP25 89
-#define MV64x60_IRQ_GPP26 90
-#define MV64x60_IRQ_GPP27 91
-#define MV64x60_IRQ_GPP28 92
-#define MV64x60_IRQ_GPP29 93
-#define MV64x60_IRQ_GPP30 94
-#define MV64x60_IRQ_GPP31 95
-
-/* Offsets for register blocks */
-#define GT64260_ENET_PHY_ADDR 0x2000
-#define GT64260_ENET_ESMIR 0x2010
-#define GT64260_ENET_0_OFFSET 0x2400
-#define GT64260_ENET_1_OFFSET 0x2800
-#define GT64260_ENET_2_OFFSET 0x2c00
-#define MV64x60_SDMA_0_OFFSET 0x4000
-#define MV64x60_SDMA_1_OFFSET 0x6000
-#define MV64x60_MPSC_0_OFFSET 0x8000
-#define MV64x60_MPSC_1_OFFSET 0x9000
-#define MV64x60_MPSC_ROUTING_OFFSET 0xb400
-#define MV64x60_SDMA_INTR_OFFSET 0xb800
-#define MV64x60_BRG_0_OFFSET 0xb200
-#define MV64x60_BRG_1_OFFSET 0xb208
-
-/*
- *****************************************************************************
- *
- * CPU Interface Registers
- *
- *****************************************************************************
- */
-
-/* CPU physical address of bridge's registers */
-#define MV64x60_INTERNAL_SPACE_DECODE 0x0068
-#define MV64x60_INTERNAL_SPACE_SIZE 0x10000
-#define MV64x60_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
-
-#define MV64360_CPU_BAR_ENABLE 0x0278
-
-/* CPU Memory Controller Window Registers (4 windows) */
-#define MV64x60_CPU2MEM_WINDOWS 4
-
-#define MV64x60_CPU2MEM_0_BASE 0x0008
-#define MV64x60_CPU2MEM_0_SIZE 0x0010
-#define MV64x60_CPU2MEM_1_BASE 0x0208
-#define MV64x60_CPU2MEM_1_SIZE 0x0210
-#define MV64x60_CPU2MEM_2_BASE 0x0018
-#define MV64x60_CPU2MEM_2_SIZE 0x0020
-#define MV64x60_CPU2MEM_3_BASE 0x0218
-#define MV64x60_CPU2MEM_3_SIZE 0x0220
-
-/* CPU Device Controller Window Registers (4 windows) */
-#define MV64x60_CPU2DEV_WINDOWS 4
-
-#define MV64x60_CPU2DEV_0_BASE 0x0028
-#define MV64x60_CPU2DEV_0_SIZE 0x0030
-#define MV64x60_CPU2DEV_1_BASE 0x0228
-#define MV64x60_CPU2DEV_1_SIZE 0x0230
-#define MV64x60_CPU2DEV_2_BASE 0x0248
-#define MV64x60_CPU2DEV_2_SIZE 0x0250
-#define MV64x60_CPU2DEV_3_BASE 0x0038
-#define MV64x60_CPU2DEV_3_SIZE 0x0040
-
-#define MV64x60_CPU2BOOT_0_BASE 0x0238
-#define MV64x60_CPU2BOOT_0_SIZE 0x0240
-
-#define MV64360_CPU2SRAM_BASE 0x0268
-
-/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
-#define MV64x60_PCI_BUSES 2
-#define MV64x60_PCI_IO_WINDOWS_PER_BUS 1
-#define MV64x60_PCI_MEM_WINDOWS_PER_BUS 4
-
-#define MV64x60_CPU2PCI_SWAP_BYTE 0x00000000
-#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000
-#define MV64x60_CPU2PCI_SWAP_BYTE_WORD 0x02000000
-#define MV64x60_CPU2PCI_SWAP_WORD 0x03000000
-
-#define MV64x60_CPU2PCI_MEM_REQ64 (1<<27)
-
-#define MV64x60_CPU2PCI0_IO_BASE 0x0048
-#define MV64x60_CPU2PCI0_IO_SIZE 0x0050
-#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058
-#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060
-#define MV64x60_CPU2PCI0_MEM_1_BASE 0x0080
-#define MV64x60_CPU2PCI0_MEM_1_SIZE 0x0088
-#define MV64x60_CPU2PCI0_MEM_2_BASE 0x0258
-#define MV64x60_CPU2PCI0_MEM_2_SIZE 0x0260
-#define MV64x60_CPU2PCI0_MEM_3_BASE 0x0280
-#define MV64x60_CPU2PCI0_MEM_3_SIZE 0x0288
-
-#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_LO 0x0100
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_HI 0x0328
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_LO 0x02f8
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_HI 0x0330
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_LO 0x0300
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_HI 0x0338
-
-#define MV64x60_CPU2PCI1_IO_BASE 0x0090
-#define MV64x60_CPU2PCI1_IO_SIZE 0x0098
-#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0
-#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8
-#define MV64x60_CPU2PCI1_MEM_1_BASE 0x00b0
-#define MV64x60_CPU2PCI1_MEM_1_SIZE 0x00b8
-#define MV64x60_CPU2PCI1_MEM_2_BASE 0x02a0
-#define MV64x60_CPU2PCI1_MEM_2_SIZE 0x02a8
-#define MV64x60_CPU2PCI1_MEM_3_BASE 0x02b0
-#define MV64x60_CPU2PCI1_MEM_3_SIZE 0x02b8
-
-#define MV64x60_CPU2PCI1_IO_REMAP 0x0108
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_LO 0x0118
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_HI 0x0348
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_LO 0x0310
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_HI 0x0350
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_LO 0x0318
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_HI 0x0358
-
-/* CPU Control Registers */
-#define MV64x60_CPU_CONFIG 0x0000
-#define MV64x60_CPU_MODE 0x0120
-#define MV64x60_CPU_MASTER_CNTL 0x0160
-#define MV64x60_CPU_XBAR_CNTL_LO 0x0150
-#define MV64x60_CPU_XBAR_CNTL_HI 0x0158
-#define MV64x60_CPU_XBAR_TO 0x0168
-
-#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
-#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
-
-#define MV64360_CPU_PADS_CALIBRATION 0x03b4
-#define MV64360_CPU_RESET_SAMPLE_LO 0x03c4
-#define MV64360_CPU_RESET_SAMPLE_HI 0x03d4
-
-/* SMP Register Map */
-#define MV64360_WHO_AM_I 0x0200
-#define MV64360_CPU0_DOORBELL 0x0214
-#define MV64360_CPU0_DOORBELL_CLR 0x021c
-#define MV64360_CPU0_DOORBELL_MASK 0x0234
-#define MV64360_CPU1_DOORBELL 0x0224
-#define MV64360_CPU1_DOORBELL_CLR 0x022c
-#define MV64360_CPU1_DOORBELL_MASK 0x023c
-#define MV64360_CPUx_DOORBELL(x) (0x0214 + ((x)*0x10))
-#define MV64360_CPUx_DOORBELL_CLR(x) (0x021c + ((x)*0x10))
-#define MV64360_CPUx_DOORBELL_MASK(x) (0x0234 + ((x)*0x08))
-#define MV64360_SEMAPHORE_0 0x0244
-#define MV64360_SEMAPHORE_1 0x024c
-#define MV64360_SEMAPHORE_2 0x0254
-#define MV64360_SEMAPHORE_3 0x025c
-#define MV64360_SEMAPHORE_4 0x0264
-#define MV64360_SEMAPHORE_5 0x026c
-#define MV64360_SEMAPHORE_6 0x0274
-#define MV64360_SEMAPHORE_7 0x027c
-
-/* CPU Sync Barrier Registers */
-#define GT64260_CPU_SYNC_BARRIER_PCI0 0x00c0
-#define GT64260_CPU_SYNC_BARRIER_PCI1 0x00c8
-
-#define MV64360_CPU0_SYNC_BARRIER_TRIG 0x00c0
-#define MV64360_CPU0_SYNC_BARRIER_VIRT 0x00c8
-#define MV64360_CPU1_SYNC_BARRIER_TRIG 0x00d0
-#define MV64360_CPU1_SYNC_BARRIER_VIRT 0x00d8
-
-/* CPU Deadlock and Ordering registers (Rev B part only) */
-#define GT64260_CPU_DEADLOCK_ORDERING 0x02d0
-#define GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH 0x02d8
-#define GT64260_CPU_COUNTERS_SYNC_BARRIER_ATTRIBUTE 0x02e0
-
-/* CPU Access Protection Registers (gt64260 realy has 8 but don't need) */
-#define MV64x260_CPU_PROT_WINDOWS 4
-
-#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
-#define GT64260_CPU_PROT_WRPROTECT (1<<17)
-#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
-
-#define MV64360_CPU_PROT_ACCPROTECT (1<<20)
-#define MV64360_CPU_PROT_WRPROTECT (1<<21)
-#define MV64360_CPU_PROT_CACHEPROTECT (1<<22)
-#define MV64360_CPU_PROT_WIN_ENABLE (1<<31)
-
-#define MV64x60_CPU_PROT_BASE_0 0x0180
-#define MV64x60_CPU_PROT_SIZE_0 0x0188
-#define MV64x60_CPU_PROT_BASE_1 0x0190
-#define MV64x60_CPU_PROT_SIZE_1 0x0198
-#define MV64x60_CPU_PROT_BASE_2 0x01a0
-#define MV64x60_CPU_PROT_SIZE_2 0x01a8
-#define MV64x60_CPU_PROT_BASE_3 0x01b0
-#define MV64x60_CPU_PROT_SIZE_3 0x01b8
-
-#define GT64260_CPU_PROT_BASE_4 0x01c0
-#define GT64260_CPU_PROT_SIZE_4 0x01c8
-#define GT64260_CPU_PROT_BASE_5 0x01d0
-#define GT64260_CPU_PROT_SIZE_5 0x01d8
-#define GT64260_CPU_PROT_BASE_6 0x01e0
-#define GT64260_CPU_PROT_SIZE_6 0x01e8
-#define GT64260_CPU_PROT_BASE_7 0x01f0
-#define GT64260_CPU_PROT_SIZE_7 0x01f8
-
-/* CPU Snoop Control Registers (64260 only) */
-#define GT64260_CPU_SNOOP_WINDOWS 4
-
-#define GT64260_CPU_SNOOP_NONE 0x00000000
-#define GT64260_CPU_SNOOP_WT 0x00010000
-#define GT64260_CPU_SNOOP_WB 0x00020000
-#define GT64260_CPU_SNOOP_MASK 0x00030000
-#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
-
-#define GT64260_CPU_SNOOP_BASE_0 0x0380
-#define GT64260_CPU_SNOOP_SIZE_0 0x0388
-#define GT64260_CPU_SNOOP_BASE_1 0x0390
-#define GT64260_CPU_SNOOP_SIZE_1 0x0398
-#define GT64260_CPU_SNOOP_BASE_2 0x03a0
-#define GT64260_CPU_SNOOP_SIZE_2 0x03a8
-#define GT64260_CPU_SNOOP_BASE_3 0x03b0
-#define GT64260_CPU_SNOOP_SIZE_3 0x03b8
-
-/* CPU Snoop Control Registers (64360 only) */
-#define MV64360_CPU_SNOOP_WINDOWS 4
-#define MV64360_CPU_SNOOP_NONE 0x00000000
-#define MV64360_CPU_SNOOP_WT 0x00010000
-#define MV64360_CPU_SNOOP_WB 0x00020000
-#define MV64360_CPU_SNOOP_MASK 0x00030000
-#define MV64360_CPU_SNOOP_ALL_BITS MV64360_CPU_SNOOP_MASK
-
-
-/* CPU Error Report Registers */
-#define MV64x60_CPU_ERR_ADDR_LO 0x0070
-#define MV64x60_CPU_ERR_ADDR_HI 0x0078
-#define MV64x60_CPU_ERR_DATA_LO 0x0128
-#define MV64x60_CPU_ERR_DATA_HI 0x0130
-#define MV64x60_CPU_ERR_PARITY 0x0138
-#define MV64x60_CPU_ERR_CAUSE 0x0140
-#define MV64x60_CPU_ERR_MASK 0x0148
-
-/*
- *****************************************************************************
- *
- * SRAM Controller Registers
- *
- *****************************************************************************
- */
-
-#define MV64360_SRAM_CONFIG 0x0380
-#define MV64360_SRAM_TEST_MODE 0x03f4
-#define MV64360_SRAM_ERR_CAUSE 0x0388
-#define MV64360_SRAM_ERR_ADDR_LO 0x0390
-#define MV64360_SRAM_ERR_ADDR_HI 0x03f8
-#define MV64360_SRAM_ERR_DATA_LO 0x0398
-#define MV64360_SRAM_ERR_DATA_HI 0x03a0
-#define MV64360_SRAM_ERR_PARITY 0x03a8
-
-#define MV64360_SRAM_SIZE 0x00040000 /* 2Mb/256KB SRAM */
-
-/*
- *****************************************************************************
- *
- * SDRAM/MEM Controller Registers
- *
- *****************************************************************************
- */
-
-/* SDRAM Config Registers (64260) */
-#define GT64260_SDRAM_CONFIG 0x0448
-
-/* SDRAM Error Report Registers (64260) */
-#define GT64260_SDRAM_ERR_DATA_LO 0x0484
-#define GT64260_SDRAM_ERR_DATA_HI 0x0480
-#define GT64260_SDRAM_ERR_ADDR 0x0490
-#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
-#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
-#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
-#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
-
-/* SDRAM Config Registers (64360) */
-#define MV64360_SDRAM_CONFIG 0x1400
-
-/* SDRAM Control Registers */
-#define MV64360_D_UNIT_CONTROL_LOW 0x1404
-#define MV64360_D_UNIT_CONTROL_HIGH 0x1424
-#define MV64460_D_UNIT_MMASK 0x14b0
-
-/* SDRAM Error Report Registers (64360) */
-#define MV64360_SDRAM_ERR_DATA_LO 0x1444
-#define MV64360_SDRAM_ERR_DATA_HI 0x1440
-#define MV64360_SDRAM_ERR_ADDR 0x1450
-#define MV64360_SDRAM_ERR_ECC_RCVD 0x1448
-#define MV64360_SDRAM_ERR_ECC_CALC 0x144c
-#define MV64360_SDRAM_ERR_ECC_CNTL 0x1454
-#define MV64360_SDRAM_ERR_ECC_ERR_CNT 0x1458
-
-/*
- *****************************************************************************
- *
- * Device/BOOT Controller Registers
- *
- *****************************************************************************
- */
-
-/* Device Control Registers */
-#define MV64x60_DEV_BANK_PARAMS_0 0x045c
-#define MV64x60_DEV_BANK_PARAMS_1 0x0460
-#define MV64x60_DEV_BANK_PARAMS_2 0x0464
-#define MV64x60_DEV_BANK_PARAMS_3 0x0468
-#define MV64x60_DEV_BOOT_PARAMS 0x046c
-#define MV64x60_DEV_IF_CNTL 0x04c0
-#define MV64x60_DEV_IF_XBAR_CNTL_LO 0x04c8
-#define MV64x60_DEV_IF_XBAR_CNTL_HI 0x04cc
-#define MV64x60_DEV_IF_XBAR_CNTL_TO 0x04c4
-
-/* Device Interrupt Registers */
-#define MV64x60_DEV_INTR_CAUSE 0x04d0
-#define MV64x60_DEV_INTR_MASK 0x04d4
-#define MV64x60_DEV_INTR_ERR_ADDR 0x04d8
-
-#define MV64360_DEV_INTR_ERR_DATA 0x04dc
-#define MV64360_DEV_INTR_ERR_PAR 0x04e0
-
-/*
- *****************************************************************************
- *
- * PCI Bridge Interface Registers
- *
- *****************************************************************************
- */
-
-/* PCI Configuration Access Registers */
-#define MV64x60_PCI0_CONFIG_ADDR 0x0cf8
-#define MV64x60_PCI0_CONFIG_DATA 0x0cfc
-#define MV64x60_PCI0_IACK 0x0c34
-
-#define MV64x60_PCI1_CONFIG_ADDR 0x0c78
-#define MV64x60_PCI1_CONFIG_DATA 0x0c7c
-#define MV64x60_PCI1_IACK 0x0cb4
-
-/* PCI Control Registers */
-#define MV64x60_PCI0_CMD 0x0c00
-#define MV64x60_PCI0_MODE 0x0d00
-#define MV64x60_PCI0_TO_RETRY 0x0c04
-#define MV64x60_PCI0_RD_BUF_DISCARD_TIMER 0x0d04
-#define MV64x60_PCI0_MSI_TRIGGER_TIMER 0x0c38
-#define MV64x60_PCI0_ARBITER_CNTL 0x1d00
-#define MV64x60_PCI0_XBAR_CNTL_LO 0x1d08
-#define MV64x60_PCI0_XBAR_CNTL_HI 0x1d0c
-#define MV64x60_PCI0_XBAR_CNTL_TO 0x1d04
-#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_LO 0x1d18
-#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_HI 0x1d1c
-#define MV64x60_PCI0_SYNC_BARRIER 0x1d10
-#define MV64x60_PCI0_P2P_CONFIG 0x1d14
-#define MV64x60_PCI0_INTR_MASK
-
-#define GT64260_PCI0_P2P_SWAP_CNTL 0x1d54
-
-#define MV64x60_PCI1_CMD 0x0c80
-#define MV64x60_PCI1_MODE 0x0d80
-#define MV64x60_PCI1_TO_RETRY 0x0c84
-#define MV64x60_PCI1_RD_BUF_DISCARD_TIMER 0x0d84
-#define MV64x60_PCI1_MSI_TRIGGER_TIMER 0x0cb8
-#define MV64x60_PCI1_ARBITER_CNTL 0x1d80
-#define MV64x60_PCI1_XBAR_CNTL_LO 0x1d88
-#define MV64x60_PCI1_XBAR_CNTL_HI 0x1d8c
-#define MV64x60_PCI1_XBAR_CNTL_TO 0x1d84
-#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_LO 0x1d98
-#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_HI 0x1d9c
-#define MV64x60_PCI1_SYNC_BARRIER 0x1d90
-#define MV64x60_PCI1_P2P_CONFIG 0x1d94
-
-#define GT64260_PCI1_P2P_SWAP_CNTL 0x1dd4
-
-/* Different modes that the pci hoses can be in (bits 5:4 in PCI Mode reg) */
-#define MV64x60_PCIMODE_CONVENTIONAL 0
-#define MV64x60_PCIMODE_PCIX_66 (1 << 4)
-#define MV64x60_PCIMODE_PCIX_100 (2 << 4)
-#define MV64x60_PCIMODE_PCIX_133 (3 << 4)
-#define MV64x60_PCIMODE_MASK (0x3 << 4)
-
-/* PCI Access Control Regions Registers */
-#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
-#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
-#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
-#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
-#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
-#define GT64260_PCI_ACC_CNTL_MBURST_32_BTYES 0x00000000
-#define GT64260_PCI_ACC_CNTL_MBURST_64_BYTES 0x00100000
-#define GT64260_PCI_ACC_CNTL_MBURST_128_BYTES 0x00200000
-#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
-#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
-#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
-#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
-#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
-
-#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
- GT64260_PCI_ACC_CNTL_DREADEN | \
- GT64260_PCI_ACC_CNTL_RDPREFETCH | \
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
- GT64260_PCI_ACC_CNTL_MBURST_MASK | \
- GT64260_PCI_ACC_CNTL_SWAP_MASK | \
- GT64260_PCI_ACC_CNTL_ACCPROT| \
- GT64260_PCI_ACC_CNTL_WRPROT)
-
-#define MV64360_PCI_ACC_CNTL_ENABLE (1<<0)
-#define MV64360_PCI_ACC_CNTL_REQ64 (1<<1)
-#define MV64360_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
-#define MV64360_PCI_ACC_CNTL_SNOOP_WT 0x00000004
-#define MV64360_PCI_ACC_CNTL_SNOOP_WB 0x00000008
-#define MV64360_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
-#define MV64360_PCI_ACC_CNTL_ACCPROT (1<<4)
-#define MV64360_PCI_ACC_CNTL_WRPROT (1<<5)
-#define MV64360_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define MV64360_PCI_ACC_CNTL_SWAP_NONE 0x00000040
-#define MV64360_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
-#define MV64360_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
-#define MV64360_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
-#define MV64360_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
-#define MV64360_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
-#define MV64360_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
-#define MV64360_PCI_ACC_CNTL_MBURST_MASK 0x00000300
-#define MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
-#define MV64360_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
-#define MV64360_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
-#define MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
-#define MV64360_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
-
-#define MV64360_PCI_ACC_CNTL_ALL_BITS (MV64360_PCI_ACC_CNTL_ENABLE | \
- MV64360_PCI_ACC_CNTL_REQ64 | \
- MV64360_PCI_ACC_CNTL_SNOOP_MASK | \
- MV64360_PCI_ACC_CNTL_ACCPROT | \
- MV64360_PCI_ACC_CNTL_WRPROT | \
- MV64360_PCI_ACC_CNTL_SWAP_MASK | \
- MV64360_PCI_ACC_CNTL_MBURST_MASK | \
- MV64360_PCI_ACC_CNTL_RDSIZE_MASK)
-
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04
-#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14
-#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24
-#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34
-#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44
-#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54
-#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58
-
-#define GT64260_PCI0_ACC_CNTL_6_BASE_LO 0x1e60
-#define GT64260_PCI0_ACC_CNTL_6_BASE_HI 0x1e64
-#define GT64260_PCI0_ACC_CNTL_6_SIZE 0x1e68
-#define GT64260_PCI0_ACC_CNTL_7_BASE_LO 0x1e70
-#define GT64260_PCI0_ACC_CNTL_7_BASE_HI 0x1e74
-#define GT64260_PCI0_ACC_CNTL_7_SIZE 0x1e78
-
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84
-#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94
-#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4
-#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4
-#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4
-#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4
-#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8
-
-#define GT64260_PCI1_ACC_CNTL_6_BASE_LO 0x1ee0
-#define GT64260_PCI1_ACC_CNTL_6_BASE_HI 0x1ee4
-#define GT64260_PCI1_ACC_CNTL_6_SIZE 0x1ee8
-#define GT64260_PCI1_ACC_CNTL_7_BASE_LO 0x1ef0
-#define GT64260_PCI1_ACC_CNTL_7_BASE_HI 0x1ef4
-#define GT64260_PCI1_ACC_CNTL_7_SIZE 0x1ef8
-
-/* PCI Snoop Control Registers (64260 only) */
-#define GT64260_PCI_SNOOP_NONE 0x00000000
-#define GT64260_PCI_SNOOP_WT 0x00001000
-#define GT64260_PCI_SNOOP_WB 0x00002000
-
-#define GT64260_PCI0_SNOOP_0_BASE_LO 0x1f00
-#define GT64260_PCI0_SNOOP_0_BASE_HI 0x1f04
-#define GT64260_PCI0_SNOOP_0_SIZE 0x1f08
-#define GT64260_PCI0_SNOOP_1_BASE_LO 0x1f10
-#define GT64260_PCI0_SNOOP_1_BASE_HI 0x1f14
-#define GT64260_PCI0_SNOOP_1_SIZE 0x1f18
-#define GT64260_PCI0_SNOOP_2_BASE_LO 0x1f20
-#define GT64260_PCI0_SNOOP_2_BASE_HI 0x1f24
-#define GT64260_PCI0_SNOOP_2_SIZE 0x1f28
-#define GT64260_PCI0_SNOOP_3_BASE_LO 0x1f30
-#define GT64260_PCI0_SNOOP_3_BASE_HI 0x1f34
-#define GT64260_PCI0_SNOOP_3_SIZE 0x1f38
-
-#define GT64260_PCI1_SNOOP_0_BASE_LO 0x1f80
-#define GT64260_PCI1_SNOOP_0_BASE_HI 0x1f84
-#define GT64260_PCI1_SNOOP_0_SIZE 0x1f88
-#define GT64260_PCI1_SNOOP_1_BASE_LO 0x1f90
-#define GT64260_PCI1_SNOOP_1_BASE_HI 0x1f94
-#define GT64260_PCI1_SNOOP_1_SIZE 0x1f98
-#define GT64260_PCI1_SNOOP_2_BASE_LO 0x1fa0
-#define GT64260_PCI1_SNOOP_2_BASE_HI 0x1fa4
-#define GT64260_PCI1_SNOOP_2_SIZE 0x1fa8
-#define GT64260_PCI1_SNOOP_3_BASE_LO 0x1fb0
-#define GT64260_PCI1_SNOOP_3_BASE_HI 0x1fb4
-#define GT64260_PCI1_SNOOP_3_SIZE 0x1fb8
-
-/* PCI Error Report Registers */
-#define MV64x60_PCI0_ERR_SERR_MASK 0x0c28
-#define MV64x60_PCI0_ERR_ADDR_LO 0x1d40
-#define MV64x60_PCI0_ERR_ADDR_HI 0x1d44
-#define MV64x60_PCI0_ERR_DATA_LO 0x1d48
-#define MV64x60_PCI0_ERR_DATA_HI 0x1d4c
-#define MV64x60_PCI0_ERR_CMD 0x1d50
-#define MV64x60_PCI0_ERR_CAUSE 0x1d58
-#define MV64x60_PCI0_ERR_MASK 0x1d5c
-
-#define MV64x60_PCI1_ERR_SERR_MASK 0x0ca8
-#define MV64x60_PCI1_ERR_ADDR_LO 0x1dc0
-#define MV64x60_PCI1_ERR_ADDR_HI 0x1dc4
-#define MV64x60_PCI1_ERR_DATA_LO 0x1dc8
-#define MV64x60_PCI1_ERR_DATA_HI 0x1dcc
-#define MV64x60_PCI1_ERR_CMD 0x1dd0
-#define MV64x60_PCI1_ERR_CAUSE 0x1dd8
-#define MV64x60_PCI1_ERR_MASK 0x1ddc
-
-/* PCI Slave Address Decoding Registers */
-#define MV64x60_PCI0_MEM_0_SIZE 0x0c08
-#define MV64x60_PCI0_MEM_1_SIZE 0x0d08
-#define MV64x60_PCI0_MEM_2_SIZE 0x0c0c
-#define MV64x60_PCI0_MEM_3_SIZE 0x0d0c
-#define MV64x60_PCI1_MEM_0_SIZE 0x0c88
-#define MV64x60_PCI1_MEM_1_SIZE 0x0d88
-#define MV64x60_PCI1_MEM_2_SIZE 0x0c8c
-#define MV64x60_PCI1_MEM_3_SIZE 0x0d8c
-
-#define MV64x60_PCI0_BAR_ENABLE 0x0c3c
-#define MV64x60_PCI1_BAR_ENABLE 0x0cbc
-
-#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c
-#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc
-
-#define MV64x60_PCI0_SLAVE_MEM_0_REMAP 0x0c48
-#define MV64x60_PCI0_SLAVE_MEM_1_REMAP 0x0d48
-#define MV64x60_PCI0_SLAVE_MEM_2_REMAP 0x0c4c
-#define MV64x60_PCI0_SLAVE_MEM_3_REMAP 0x0d4c
-#define MV64x60_PCI0_SLAVE_DEV_0_REMAP 0x0c50
-#define MV64x60_PCI0_SLAVE_DEV_1_REMAP 0x0d50
-#define MV64x60_PCI0_SLAVE_DEV_2_REMAP 0x0d58
-#define MV64x60_PCI0_SLAVE_DEV_3_REMAP 0x0c54
-#define MV64x60_PCI0_SLAVE_BOOT_REMAP 0x0d54
-#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
-#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
-#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
-#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
-#define MV64x60_PCI0_SLAVE_P2P_IO_REMAP 0x0d6c
-#define MV64x60_PCI0_SLAVE_CPU_REMAP 0x0d70
-
-#define MV64x60_PCI1_SLAVE_MEM_0_REMAP 0x0cc8
-#define MV64x60_PCI1_SLAVE_MEM_1_REMAP 0x0dc8
-#define MV64x60_PCI1_SLAVE_MEM_2_REMAP 0x0ccc
-#define MV64x60_PCI1_SLAVE_MEM_3_REMAP 0x0dcc
-#define MV64x60_PCI1_SLAVE_DEV_0_REMAP 0x0cd0
-#define MV64x60_PCI1_SLAVE_DEV_1_REMAP 0x0dd0
-#define MV64x60_PCI1_SLAVE_DEV_2_REMAP 0x0dd8
-#define MV64x60_PCI1_SLAVE_DEV_3_REMAP 0x0cd4
-#define MV64x60_PCI1_SLAVE_BOOT_REMAP 0x0dd4
-#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
-#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
-#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
-#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
-#define MV64x60_PCI1_SLAVE_P2P_IO_REMAP 0x0dec
-#define MV64x60_PCI1_SLAVE_CPU_REMAP 0x0df0
-
-#define MV64360_PCICFG_CPCI_HOTSWAP 0x68
-
-/*
- *****************************************************************************
- *
- * ENET Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* ENET Controller Window Registers (6 windows) */
-#define MV64360_ENET2MEM_WINDOWS 6
-
-#define MV64360_ENET2MEM_0_BASE 0x2200
-#define MV64360_ENET2MEM_0_SIZE 0x2204
-#define MV64360_ENET2MEM_1_BASE 0x2208
-#define MV64360_ENET2MEM_1_SIZE 0x220c
-#define MV64360_ENET2MEM_2_BASE 0x2210
-#define MV64360_ENET2MEM_2_SIZE 0x2214
-#define MV64360_ENET2MEM_3_BASE 0x2218
-#define MV64360_ENET2MEM_3_SIZE 0x221c
-#define MV64360_ENET2MEM_4_BASE 0x2220
-#define MV64360_ENET2MEM_4_SIZE 0x2224
-#define MV64360_ENET2MEM_5_BASE 0x2228
-#define MV64360_ENET2MEM_5_SIZE 0x222c
-
-#define MV64360_ENET2MEM_SNOOP_NONE 0x00000000
-#define MV64360_ENET2MEM_SNOOP_WT 0x00001000
-#define MV64360_ENET2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_ENET2MEM_BAR_ENABLE 0x2290
-
-#define MV64360_ENET2MEM_ACC_PROT_0 0x2294
-#define MV64360_ENET2MEM_ACC_PROT_1 0x2298
-#define MV64360_ENET2MEM_ACC_PROT_2 0x229c
-
-/*
- *****************************************************************************
- *
- * MPSC Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* MPSC Controller Window Registers (4 windows) */
-#define MV64360_MPSC2MEM_WINDOWS 4
-
-#define MV64360_MPSC2MEM_0_BASE 0xf200
-#define MV64360_MPSC2MEM_0_SIZE 0xf204
-#define MV64360_MPSC2MEM_1_BASE 0xf208
-#define MV64360_MPSC2MEM_1_SIZE 0xf20c
-#define MV64360_MPSC2MEM_2_BASE 0xf210
-#define MV64360_MPSC2MEM_2_SIZE 0xf214
-#define MV64360_MPSC2MEM_3_BASE 0xf218
-#define MV64360_MPSC2MEM_3_SIZE 0xf21c
-
-#define MV64360_MPSC_0_REMAP 0xf240
-#define MV64360_MPSC_1_REMAP 0xf244
-
-#define MV64360_MPSC2MEM_SNOOP_NONE 0x00000000
-#define MV64360_MPSC2MEM_SNOOP_WT 0x00001000
-#define MV64360_MPSC2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_MPSC2MEM_BAR_ENABLE 0xf250
-
-#define MV64360_MPSC2MEM_ACC_PROT_0 0xf254
-#define MV64360_MPSC2MEM_ACC_PROT_1 0xf258
-
-#define MV64360_MPSC2REGS_BASE 0xf25c
-
-/*
- *****************************************************************************
- *
- * Timer/Counter Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_TIMR_CNTR_0 0x0850
-#define MV64x60_TIMR_CNTR_1 0x0854
-#define MV64x60_TIMR_CNTR_2 0x0858
-#define MV64x60_TIMR_CNTR_3 0x085c
-#define MV64x60_TIMR_CNTR_0_3_CNTL 0x0864
-#define MV64x60_TIMR_CNTR_0_3_INTR_CAUSE 0x0868
-#define MV64x60_TIMR_CNTR_0_3_INTR_MASK 0x086c
-
-#define GT64260_TIMR_CNTR_4 0x0950
-#define GT64260_TIMR_CNTR_5 0x0954
-#define GT64260_TIMR_CNTR_6 0x0958
-#define GT64260_TIMR_CNTR_7 0x095c
-#define GT64260_TIMR_CNTR_4_7_CNTL 0x0964
-#define GT64260_TIMR_CNTR_4_7_INTR_CAUSE 0x0968
-#define GT64260_TIMR_CNTR_4_7_INTR_MASK 0x096c
-
-/*
- *****************************************************************************
- *
- * Communications Controller
- *
- *****************************************************************************
- */
-
-#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
-#define GT64260_SER_INIT_LAST_DATA 0xf324
-#define GT64260_SER_INIT_CONTROL 0xf328
-#define GT64260_SER_INIT_STATUS 0xf32c
-
-#define MV64x60_COMM_ARBITER_CNTL 0xf300
-#define MV64x60_COMM_CONFIG 0xb40c
-#define MV64x60_COMM_XBAR_TO 0xf304
-#define MV64x60_COMM_INTR_CAUSE 0xf310
-#define MV64x60_COMM_INTR_MASK 0xf314
-#define MV64x60_COMM_ERR_ADDR 0xf318
-
-#define MV64360_COMM_ARBITER_CNTL 0xf300
-
-/*
- *****************************************************************************
- *
- * IDMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* IDMA Controller Window Registers (8 windows) */
-#define MV64360_IDMA2MEM_WINDOWS 8
-
-#define MV64360_IDMA2MEM_0_BASE 0x0a00
-#define MV64360_IDMA2MEM_0_SIZE 0x0a04
-#define MV64360_IDMA2MEM_1_BASE 0x0a08
-#define MV64360_IDMA2MEM_1_SIZE 0x0a0c
-#define MV64360_IDMA2MEM_2_BASE 0x0a10
-#define MV64360_IDMA2MEM_2_SIZE 0x0a14
-#define MV64360_IDMA2MEM_3_BASE 0x0a18
-#define MV64360_IDMA2MEM_3_SIZE 0x0a1c
-#define MV64360_IDMA2MEM_4_BASE 0x0a20
-#define MV64360_IDMA2MEM_4_SIZE 0x0a24
-#define MV64360_IDMA2MEM_5_BASE 0x0a28
-#define MV64360_IDMA2MEM_5_SIZE 0x0a2c
-#define MV64360_IDMA2MEM_6_BASE 0x0a30
-#define MV64360_IDMA2MEM_6_SIZE 0x0a34
-#define MV64360_IDMA2MEM_7_BASE 0x0a38
-#define MV64360_IDMA2MEM_7_SIZE 0x0a3c
-
-#define MV64360_IDMA2MEM_SNOOP_NONE 0x00000000
-#define MV64360_IDMA2MEM_SNOOP_WT 0x00001000
-#define MV64360_IDMA2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_IDMA2MEM_BAR_ENABLE 0x0a80
-
-#define MV64360_IDMA2MEM_ACC_PROT_0 0x0a70
-#define MV64360_IDMA2MEM_ACC_PROT_1 0x0a74
-#define MV64360_IDMA2MEM_ACC_PROT_2 0x0a78
-#define MV64360_IDMA2MEM_ACC_PROT_3 0x0a7c
-
-#define MV64x60_IDMA_0_OFFSET 0x0800
-#define MV64x60_IDMA_1_OFFSET 0x0804
-#define MV64x60_IDMA_2_OFFSET 0x0808
-#define MV64x60_IDMA_3_OFFSET 0x080c
-#define MV64x60_IDMA_4_OFFSET 0x0900
-#define MV64x60_IDMA_5_OFFSET 0x0904
-#define MV64x60_IDMA_6_OFFSET 0x0908
-#define MV64x60_IDMA_7_OFFSET 0x090c
-
-#define MV64x60_IDMA_BYTE_COUNT (0x0800 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_SRC_ADDR (0x0810 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_DST_ADDR (0x0820 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_NEXT_DESC (0x0830 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CUR_DESC (0x0870 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_SRC_PCI_ADDR_HI (0x0890 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_DST_PCI_ADDR_HI (0x08a0 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_NEXT_DESC_PCI_ADDR_HI (0x08b0 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CONTROL_LO (0x0840 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CONTROL_HI (0x0880 - MV64x60_IDMA_0_OFFSET)
-
-#define MV64x60_IDMA_0_3_ARBITER_CNTL 0x0860
-#define MV64x60_IDMA_4_7_ARBITER_CNTL 0x0960
-
-#define MV64x60_IDMA_0_3_XBAR_TO 0x08d0
-#define MV64x60_IDMA_4_7_XBAR_TO 0x09d0
-
-#define MV64x60_IDMA_0_3_INTR_CAUSE 0x08c0
-#define MV64x60_IDMA_0_3_INTR_MASK 0x08c4
-#define MV64x60_IDMA_0_3_ERROR_ADDR 0x08c8
-#define MV64x60_IDMA_0_3_ERROR_SELECT 0x08cc
-#define MV64x60_IDMA_4_7_INTR_CAUSE 0x09c0
-#define MV64x60_IDMA_4_7_INTR_MASK 0x09c4
-#define MV64x60_IDMA_4_7_ERROR_ADDR 0x09c8
-#define MV64x60_IDMA_4_7_ERROR_SELECT 0x09cc
-
-/*
- *****************************************************************************
- *
- * Watchdog Timer Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_WDT_WDC 0xb410
-#define MV64x60_WDT_WDV 0xb414
-
-
-/*
- *****************************************************************************
- *
- * General Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE 0xf104
-#define MV64x60_GPP_INTR_CAUSE 0xf108
-#define MV64x60_GPP_INTR_MASK 0xf10c
-#define MV64x60_GPP_VALUE_SET 0xf118
-#define MV64x60_GPP_VALUE_CLR 0xf11c
-
-
-/*
- *****************************************************************************
- *
- * Multi-Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_1 0xf004
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_MPP_CNTL_3 0xf00c
-#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
-
-#define MV64x60_ETH_BAR_GAP 0x8
-#define MV64x60_ETH_SIZE_REG_GAP 0x8
-#define MV64x60_ETH_HIGH_ADDR_REMAP_REG_GAP 0x4
-#define MV64x60_ETH_PORT_ACCESS_CTRL_GAP 0x4
-
-#define MV64x60_EBAR_ATTR_DRAM_CS0 0x00000E00
-#define MV64x60_EBAR_ATTR_DRAM_CS1 0x00000D00
-#define MV64x60_EBAR_ATTR_DRAM_CS2 0x00000B00
-#define MV64x60_EBAR_ATTR_DRAM_CS3 0x00000700
-
-#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000
-#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100
-#define MV64x60_EBAR_ATTR_CBS_SRAM 0x00000000
-#define MV64x60_EBAR_ATTR_CBS_CPU_BUS 0x00000800
-
-
-/*
- *****************************************************************************
- *
- * Interrupt Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_IC_OFFSET 0x0c18
-
-#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
-#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
-#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
-#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
-#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
-#define GT64260_IC_PCI0_INTR_MASK_LO 0x0c24
-#define GT64260_IC_PCI0_INTR_MASK_HI 0x0c64
-#define GT64260_IC_PCI0_SELECT_CAUSE 0x0c74
-#define GT64260_IC_PCI1_INTR_MASK_LO 0x0ca4
-#define GT64260_IC_PCI1_INTR_MASK_HI 0x0ce4
-#define GT64260_IC_PCI1_SELECT_CAUSE 0x0cf4
-#define GT64260_IC_CPU_INT_0_MASK 0x0e60
-#define GT64260_IC_CPU_INT_1_MASK 0x0e64
-#define GT64260_IC_CPU_INT_2_MASK 0x0e68
-#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
-
-#define MV64360_IC_OFFSET 0x0000
-
-#define MV64360_IC_MAIN_CAUSE_LO 0x0004
-#define MV64360_IC_MAIN_CAUSE_HI 0x000c
-#define MV64360_IC_CPU0_INTR_MASK_LO 0x0014
-#define MV64360_IC_CPU0_INTR_MASK_HI 0x001c
-#define MV64360_IC_CPU0_SELECT_CAUSE 0x0024
-#define MV64360_IC_CPU1_INTR_MASK_LO 0x0034
-#define MV64360_IC_CPU1_INTR_MASK_HI 0x003c
-#define MV64360_IC_CPU1_SELECT_CAUSE 0x0044
-#define MV64360_IC_INT0_MASK_LO 0x0054
-#define MV64360_IC_INT0_MASK_HI 0x005c
-#define MV64360_IC_INT0_SELECT_CAUSE 0x0064
-#define MV64360_IC_INT1_MASK_LO 0x0074
-#define MV64360_IC_INT1_MASK_HI 0x007c
-#define MV64360_IC_INT1_SELECT_CAUSE 0x0084
-
-#endif /* __ASMPPC_MV64x60_DEFS_H */
diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h
deleted file mode 100644
index 3909a2eec28..00000000000
--- a/include/asm-ppc/ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ocp.h
- *
- * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- * Mipsys - France
- *
- * Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- * Additional support and port to 2.6 LDM/sysfs by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * TODO: - Add get/put interface & fixup locking to provide same API for
- * 2.4 and 2.5
- * - Rework PM callbacks
- */
-
-#ifdef __KERNEL__
-#ifndef __OCP_H__
-#define __OCP_H__
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/mmu.h>
-#include <asm/ocp_ids.h>
-
-#ifdef CONFIG_PPC_OCP
-
-#define OCP_MAX_IRQS 7
-#define MAX_EMACS 4
-#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */
-#define OCP_IRQ_MUL -2 /* used for ocp devices with multiply irqs */
-#define OCP_NULL_TYPE -1 /* used to mark end of list */
-#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */
-#define OCP_PADDR_NA 0 /* No MMIO registers */
-
-#define OCP_ANY_ID (~0)
-#define OCP_ANY_INDEX -1
-
-extern struct list_head ocp_devices;
-extern struct rw_semaphore ocp_devices_sem;
-
-struct ocp_device_id {
- unsigned int vendor, function; /* Vendor and function ID or OCP_ANY_ID */
- unsigned long driver_data; /* Data private to the driver */
-};
-
-
-/*
- * Static definition of an OCP device.
- *
- * @vendor: Vendor code. It is _STRONGLY_ discouraged to use
- * the vendor code as a way to match a unique device,
- * though I kept that possibility open, you should
- * really define different function codes for different
- * device types
- * @function: This is the function code for this device.
- * @index: This index is used for mapping the Nth function of a
- * given core. This is typically used for cross-driver
- * matching, like looking for a given MAL or ZMII from
- * an EMAC or for getting to the proper set of DCRs.
- * Indices are no longer magically calculated based on
- * structure ordering, they have to be actually coded
- * into the ocp_def to avoid any possible confusion
- * I _STRONGLY_ (again ? wow !) encourage anybody relying
- * on index mapping to encode the "target" index in an
- * associated structure pointed to by "additions", see
- * how it's done for the EMAC driver.
- * @paddr: Device physical address (may not mean anything...)
- * @irq: Interrupt line for this device (TODO: think about making
- * an array with this)
- * @pm: Currently, contains the bitmask in CPMFR DCR for the device
- * @additions: Optionally points to a function specific structure
- * providing additional informations for a given device
- * instance. It's currently used by the EMAC driver for MAL
- * channel & ZMII port mapping among others.
- * @show: Optionally points to a function specific structure
- * providing a sysfs show routine for additions fields.
- */
-struct ocp_def {
- unsigned int vendor;
- unsigned int function;
- int index;
- phys_addr_t paddr;
- int irq;
- unsigned long pm;
- void *additions;
- void (*show)(struct device *);
-};
-
-
-/* Struct for a given device instance */
-struct ocp_device {
- struct list_head link;
- char name[80]; /* device name */
- struct ocp_def *def; /* device definition */
- void *drvdata; /* driver data for this device */
- struct ocp_driver *driver;
- u32 current_state; /* Current operating state. In ACPI-speak,
- this is D0-D3, D0 being fully functional,
- and D3 being off. */
- struct device dev;
-};
-
-struct ocp_driver {
- struct list_head node;
- char *name;
- const struct ocp_device_id *id_table; /* NULL if wants all devices */
- int (*probe) (struct ocp_device *dev); /* New device inserted */
- void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */
- int (*suspend) (struct ocp_device *dev, pm_message_t state); /* Device suspended */
- int (*resume) (struct ocp_device *dev); /* Device woken up */
- struct device_driver driver;
-};
-
-#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
-#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver)
-
-/* Similar to the helpers above, these manipulate per-ocp_dev
- * driver-specific data. Currently stored as ocp_dev::ocpdev,
- * a void pointer, but it is not present on older kernels.
- */
-static inline void *
-ocp_get_drvdata(struct ocp_device *pdev)
-{
- return pdev->drvdata;
-}
-
-static inline void
-ocp_set_drvdata(struct ocp_device *pdev, void *data)
-{
- pdev->drvdata = data;
-}
-
-#if defined (CONFIG_PM)
-/*
- * This is right for the IBM 405 and 440 but will need to be
- * generalized if the OCP stuff gets used on other processors.
- */
-static inline void
-ocp_force_power_off(struct ocp_device *odev)
-{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm);
-}
-
-static inline void
-ocp_force_power_on(struct ocp_device *odev)
-{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm);
-}
-#else
-#define ocp_force_power_off(x) (void)(x)
-#define ocp_force_power_on(x) (void)(x)
-#endif
-
-/* Register/Unregister an OCP driver */
-extern int ocp_register_driver(struct ocp_driver *drv);
-extern void ocp_unregister_driver(struct ocp_driver *drv);
-
-/* Build list of devices */
-extern int ocp_early_init(void) __init;
-
-/* Find a device by index */
-extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index);
-
-/* Get a def by index */
-extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index);
-
-/* Add a device by index */
-extern int ocp_add_one_device(struct ocp_def *def);
-
-/* Remove a device by index */
-extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index);
-
-/* Iterate over devices and execute a routine */
-extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg);
-
-/* Sysfs support */
-#define OCP_SYSFS_ADDTL(type, format, name, field) \
-static ssize_t \
-show_##name##_##field(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct ocp_device *odev = to_ocp_dev(dev); \
- type *add = odev->def->additions; \
- \
- return sprintf(buf, format, add->field); \
-} \
-static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL);
-
-#ifdef CONFIG_IBM_OCP
-#include <asm/ibm_ocp.h>
-#endif
-
-#endif /* CONFIG_PPC_OCP */
-#endif /* __OCP_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ocp_ids.h b/include/asm-ppc/ocp_ids.h
deleted file mode 100644
index 8ae4b311a37..00000000000
--- a/include/asm-ppc/ocp_ids.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * ocp_ids.h
- *
- * OCP device ids based on the ideas from PCI
- *
- * The numbers below are almost completely arbitrary, and in fact
- * strings might work better. -- paulus
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * Vender device
- * [xxxx] [xxxx]
- *
- * Keep in order, please
- */
-
-/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */
-
-#define OCP_VENDOR_INVALID 0x0000
-#define OCP_VENDOR_ARM 0x0004
-#define OCP_VENDOR_FREESCALE 0x1057
-#define OCP_VENDOR_IBM 0x1014
-#define OCP_VENDOR_MOTOROLA OCP_VENDOR_FREESCALE
-#define OCP_VENDOR_XILINX 0x10ee
-#define OCP_VENDOR_UNKNOWN 0xFFFF
-
-/* device identification */
-
-/* define type */
-#define OCP_FUNC_INVALID 0x0000
-
-/* system 0x0001 - 0x001F */
-
-/* Timers 0x0020 - 0x002F */
-
-/* Serial 0x0030 - 0x006F*/
-#define OCP_FUNC_16550 0x0031
-#define OCP_FUNC_IIC 0x0032
-#define OCP_FUNC_USB 0x0033
-#define OCP_FUNC_PSC_UART 0x0034
-
-/* Memory devices 0x0090 - 0x009F */
-#define OCP_FUNC_MAL 0x0090
-#define OCP_FUNC_DMA 0x0091
-
-/* Display 0x00A0 - 0x00AF */
-
-/* Sound 0x00B0 - 0x00BF */
-
-/* Mass Storage 0x00C0 - 0xxCF */
-#define OCP_FUNC_IDE 0x00C0
-
-/* Misc 0x00D0 - 0x00DF*/
-#define OCP_FUNC_GPIO 0x00D0
-#define OCP_FUNC_ZMII 0x00D1
-#define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */
-#define OCP_FUNC_RGMII 0x00D3
-#define OCP_FUNC_TAH 0x00D4
-#define OCP_FUNC_SEC2 0x00D5 /* Crypto/Security 2.0 */
-
-/* Network 0x0200 - 0x02FF */
-#define OCP_FUNC_EMAC 0x0200
-#define OCP_FUNC_GFAR 0x0201 /* TSEC & FEC */
-
-/* Bridge devices 0xE00 - 0xEFF */
-#define OCP_FUNC_OPB 0x0E00
-
-#define OCP_FUNC_UNKNOWN 0xFFFF
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
deleted file mode 100644
index 778d5726212..00000000000
--- a/include/asm-ppc/open_pic.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * include/asm-ppc/open_pic.h -- OpenPIC Interrupt Handling
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-#ifndef _PPC_KERNEL_OPEN_PIC_H
-#define _PPC_KERNEL_OPEN_PIC_H
-
-#include <linux/irq.h>
-
-#define OPENPIC_SIZE 0x40000
-
-/*
- * Non-offset'ed vector numbers
- */
-
-#define OPENPIC_VEC_TIMER 110 /* and up */
-#define OPENPIC_VEC_IPI 118 /* and up */
-#define OPENPIC_VEC_SPURIOUS 255
-
-/* Priorities */
-#define OPENPIC_PRIORITY_IPI_BASE 10
-#define OPENPIC_PRIORITY_DEFAULT 4
-#define OPENPIC_PRIORITY_NMI 9
-
-/* OpenPIC IRQ controller structure */
-extern struct hw_interrupt_type open_pic;
-
-/* OpenPIC IPI controller structure */
-#ifdef CONFIG_SMP
-extern struct hw_interrupt_type open_pic_ipi;
-#endif /* CONFIG_SMP */
-
-extern u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern void __iomem * OpenPIC_Addr;
-extern int epic_serial_mode;
-
-/* Exported functions */
-extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
-extern void openpic_init(int linux_irq_offset);
-extern void openpic_init_nmi_irq(u_int irq);
-extern void openpic_set_irq_priority(u_int irq, u_int pri);
-extern void openpic_hookup_cascade(u_int irq, char *name,
- int (*cascade_fn)(void));
-extern u_int openpic_irq(void);
-extern void openpic_eoi(void);
-extern void openpic_request_IPIs(void);
-extern void do_openpic_setup_cpu(void);
-extern int openpic_get_irq(void);
-extern void openpic_reset_processor_phys(u_int cpumask);
-extern void openpic_setup_ISU(int isu_num, unsigned long addr);
-extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask);
-extern void smp_openpic_message_pass(int target, int msg);
-extern void openpic_set_k2_cascade(int irq);
-extern void openpic_set_priority(u_int pri);
-extern u_int openpic_get_priority(void);
-
-extern inline int openpic_to_irq(int irq)
-{
- /* IRQ 0 usually means 'disabled'.. don't mess with it
- * exceptions to this (sandpoint maybe?)
- * shouldn't use openpic_to_irq
- */
- if (irq != 0){
- return irq += NUM_8259_INTERRUPTS;
- } else {
- return 0;
- }
-}
-/* Support for second openpic on G5 macs */
-
-// FIXME: To be replaced by sane cascaded controller management */
-
-#define PMAC_OPENPIC2_OFFSET 128
-
-#define OPENPIC2_VEC_TIMER 110 /* and up */
-#define OPENPIC2_VEC_IPI 118 /* and up */
-#define OPENPIC2_VEC_SPURIOUS 127
-
-
-extern void* OpenPIC2_Addr;
-
-/* Exported functions */
-extern void openpic2_set_sources(int first_irq, int num_irqs, void *isr);
-extern void openpic2_init(int linux_irq_offset);
-extern void openpic2_init_nmi_irq(u_int irq);
-extern u_int openpic2_irq(void);
-extern void openpic2_eoi(void);
-extern int openpic2_get_irq(void);
-extern void openpic2_setup_ISU(int isu_num, unsigned long addr);
-#endif /* _PPC_KERNEL_OPEN_PIC_H */
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
deleted file mode 100644
index 37e4756b6b2..00000000000
--- a/include/asm-ppc/page.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _PPC_PAGE_H
-#define _PPC_PAGE_H
-
-#include <asm/asm-compat.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
-
-/*
- * Subtle: this is an int (not an unsigned long) and so it
- * gets extended to 64 bits the way want (i.e. with 1s). -- paulus
- */
-#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
-
-#ifdef __KERNEL__
-
-/* This must match what is in arch/ppc/Makefile */
-#define PAGE_OFFSET CONFIG_KERNEL_START
-#define KERNELBASE PAGE_OFFSET
-#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing. For now this just the IBM PPC440.
- */
-#ifdef CONFIG_PTE_64BIT
-typedef unsigned long long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
-#define PTE_FMT "%16Lx"
-#else
-typedef unsigned long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
-#define PTE_FMT "%.8lx"
-#endif
-
-/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
-
-/* align addr on a size boundary - adjust address up if needed */
-#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
-
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { pte_basic_t pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef pte_basic_t pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x) (x)
-#define pmd_val(x) (x)
-#define pgd_val(x) (x)
-#define pgprot_val(x) (x)
-
-#define __pte(x) (x)
-#define __pmd(x) (x)
-#define __pgd(x) (x)
-#define __pgprot(x) (x)
-
-#endif
-
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
-extern void copy_page(void *to, void *from);
-extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long vaddr,
- struct page *pg);
-
-#define PPC_MEMSTART 0
-#define PPC_MEMOFFSET PAGE_OFFSET
-
-#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
-#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
-
-extern int page_is_ram(unsigned long pfn);
-
-#define __pa(x) ___pa((unsigned long)(x))
-#define __va(x) ((void *)(___va((unsigned long)(x))))
-
-#define ARCH_PFN_OFFSET 0
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
-
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
- int lz;
-
- size = (size-1) >> PAGE_SHIFT;
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
- return 32 - lz;
-}
-
-typedef struct page *pgtable_t;
-
-#endif /* __ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
-#define __HAVE_ARCH_GATE_AREA 1
-
-#include <asm-generic/memory_model.h>
-#endif /* __KERNEL__ */
-#endif /* _PPC_PAGE_H */
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
deleted file mode 100644
index 81a2d0fdaf0..00000000000
--- a/include/asm-ppc/pc_serial.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-ppc/pc_serial.h
- *
- * This is basically a copy of include/asm-i386/serial.h.
- * It is used on platforms which have an ISA bus and thus are likely
- * to have PC-style serial ports at the legacy I/O port addresses.
- * It also includes the definitions for the fourport, accent, boca
- * and hub6 multiport serial cards, although I have never heard of
- * anyone using any of those on a PPC platform. -- paulus
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE 4
-#endif
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
deleted file mode 100644
index 4d35b844bc5..00000000000
--- a/include/asm-ppc/pci-bridge.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_PCI_BRIDGE_H
-#define _ASM_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller* pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, resource_size_t start,
- resource_size_t end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller* pci_bus_to_hose(int bus);
-
-/* Get the PCI host controller for an OF device */
-extern struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node);
-
-/* Fill up host controller resources from the OF node */
-extern void
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- int index; /* PCI domain number */
- struct pci_controller *next;
- struct pci_bus *bus;
- void *arch_data;
- struct device *parent;
-
- int first_busno;
- int last_busno;
- int bus_offset;
-
- void __iomem *io_base_virt;
- resource_size_t io_base_phys;
-
- /* Some machines (PReP) have a non 1:1 mapping of
- * the PCI memory space in the CPU bus space
- */
- resource_size_t pci_mem_offset;
-
- struct pci_ops *ops;
- volatile unsigned int __iomem *cfg_addr;
- volatile void __iomem *cfg_data;
- /*
- * If set, indirect method will set the cfg_type bit as
- * needed to generate type 1 configuration transactions.
- */
- int set_cfg_type;
-
- /* Currently, we limit ourselves to 1 IO range and 3 mem
- * ranges since the common pci_bus structure can't handle more
- */
- struct resource io_resource;
- struct resource mem_resources[3];
- int mem_resource_count;
-
- /* Host bridge I/O and Memory space
- * Used for BAR placement algorithms
- */
- struct resource io_space;
- struct resource mem_space;
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-/* These are used for config access before all the PCI probing
- has been done. */
-int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 *val);
-int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 *val);
-int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 *val);
-int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 val);
-int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 val);
-int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 val);
-
-extern void setup_indirect_pci_nomap(struct pci_controller* hose,
- void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller* hose,
- u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- * The following code swizzles for exactly one bridge. The routine
- * common_swizzle below handles multiple bridges. But there are a
- * some boards that don't follow the PCI spec's suggestion so we
- * break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
- unsigned char idsel)
-{
- return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP \
-({ long _ctl_ = -1; \
- if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
- _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
- _ctl_; })
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
- return (unsigned long)-1;
-}
-#endif
-
-#endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
deleted file mode 100644
index d2442cd72a5..00000000000
--- a/include/asm-ppc/pci.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef __PPC_PCI_H
-#define __PPC_PCI_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
-
-struct pci_dev;
-
-/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
-#define IOBASE_BRIDGE_NUMBER 0
-#define IOBASE_MEMORY 1
-#define IOBASE_IO 2
-#define IOBASE_ISA_IO 3
-#define IOBASE_ISA_MEM 4
-
-/*
- * Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers
- */
-extern int pci_assign_all_buses;
-
-#define pcibios_assign_all_busses() (pci_assign_all_buses)
-#define pcibios_scan_all_fns(a, b) 0
-
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0x10000000
-
-extern inline void pcibios_set_master(struct pci_dev *dev)
-{
- /* No special bus mastering setup handling */
-}
-
-extern inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res);
-
-/*
- * The PCI bus bridge can translate addresses issued by the processor(s)
- * into a different address on the PCI bus. On 32-bit cpus, we assume
- * this mapping is 1-1, but on 64-bit systems it often isn't.
- *
- * Obsolete ! Drivers should now use pci_resource_to_bus
- */
-extern unsigned long phys_to_bus(unsigned long pa);
-extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr);
-extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu()
- * and so on are not, so...
- */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
- dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
- __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
-
-#else /* coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-/* Return the index of the PCI controller for device PDEV. */
-#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
-
-/* Set the name of the bus as it appears in /proc/bus/pci */
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- return 0;
-}
-
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP 1
-
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
-struct file;
-extern pgprot_t pci_phys_mem_access_prot(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t prot);
-
-#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end);
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
deleted file mode 100644
index fd4d1d74cfb..00000000000
--- a/include/asm-ppc/pgalloc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_PGALLOC_H
-#define _PPC_PGALLOC_H
-
-#include <linux/threads.h>
-
-extern void __bad_pte(pmd_t *pmd);
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-/*
- * We don't have any real pmd's, and this code never triggers because
- * the pgd will always be present..
- */
-#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte) \
- (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#else
-#define pmd_populate_kernel(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#endif
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, pgtable_t pte);
-
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _PPC_PGALLOC_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
deleted file mode 100644
index 55f9d38e3bf..00000000000
--- a/include/asm-ppc/pgtable.h
+++ /dev/null
@@ -1,771 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_PGTABLE_H
-#define _PPC_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <asm/processor.h> /* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
-struct mm_struct;
-
-extern unsigned long va_to_phys(unsigned long address);
-extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
-#endif /* __ASSEMBLY__ */
-
-/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings. We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code. Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access. The TLB does not have accessed nor write
- * protect. We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect. We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators. Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded. We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added. We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC. The 8M pages are only used for kernel
- * mapping of well known areas. The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
- * The normal case is that PTEs are 32-bits and we have a 1-page
- * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
- *
- * For any >32-bit physical address platform, we can use the following
- * two level page table layout where the pgdir is 8KB and the MS 13 bits
- * are an index to the second level table. The combined pgdir/pmd first
- * level has 2048 entries and the second level has 512 64-bit PTE entries.
- * -Matt
- */
-/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a top-level page table entry can map */
-#define PGDIR_SHIFT PMD_SHIFT
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: our page-table tree is two-level, so
- * we don't really have any PMD directory.
- */
-#define PTRS_PER_PTE (1 << PTE_SHIFT)
-#define PTRS_PER_PMD 1
-#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
-
-#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * We no longer map larger than phys RAM with the BATs so we don't have
- * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
- * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
- * from VMALLOC_START). For this reason we have ioremap_bot to check when
- * we actually run into our mappings setup in the early boot with the VM
- * system. This really does become a problem for machines with good amounts
- * of RAM. -- Cort
- */
-#define VMALLOC_OFFSET (0x1000000) /* 16M */
-#ifdef PPC_PIN_SIZE
-#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#else
-#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#endif
-#define VMALLOC_END ioremap_bot
-
-/*
- * Bits in a linux-style PTE. These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible.
- */
-
-#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here. The 40x hardware TLBLO
- field looks like this:
-
- 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- RPN..................... 0 0 EX WR ZSEL....... W I M G
-
- Where possible we make the Linux PTE bits match up with this
-
- - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- support down to 1k pages), this is done in the TLBMiss exception
- handler.
- - We use only zones 0 (for kernel pages) and 1 (for user pages)
- of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- zone.
- - PRESENT *must* be in the bottom two bits because swap cache
- entries use the top 30 bits. Because 40x doesn't support SMP
- anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- is cleared in the TLB miss handler before the TLB entry is loaded.
- - All other bits of the PTE are loaded into TLBLO without
- modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- software PTE bits. We actually use use bits 21, 24, 25, and
- 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
-#define _PAGE_RW 0x040 /* software: Writes permitted */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_BAD 0x802
-#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing. I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN. This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- * TLB1:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN................................. - - - - - - ERPN.......
- *
- * TLB2:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- * - PRESENT *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - FILE *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
- * doesn't support SMP. So we can use this as software bit, like
- * DIRTY.
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
- * above bits. Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- * _PAGE_PRESENT
- * _PAGE_FILE
- * _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
-#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffff00000000ULL
-
-#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT 0x0001 /* Page is valid */
-#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
-#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT 0x0001
-#define _PMD_BAD 0x0ff0
-#define _PMD_PAGE_MASK 0x000c
-#define _PMD_PAGE_8M 0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
-#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
-#define _PAGE_USER 0x004 /* usermode access allowed */
-#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
-#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x080 /* C: page changed */
-#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
-#define _PAGE_RW 0x400 /* software: user write access allowed */
-
-#define _PTE_NONE_MASK _PAGE_HASHPTE
-
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE 0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED 0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE 0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC 0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC 0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK _PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE 0
-#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-/*
- * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
- * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
- * to have it in the Linux PTE, and in fact the bit could be reused for
- * another purpose. -- paulus.
- */
-
-#ifdef CONFIG_44x
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
-#else
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT _PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE __pgprot(_PAGE_BASE)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL __pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis. So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY_X
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY_X
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY_X
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED_X
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED_X
-
-#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
-
-#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
- pgprot_val(prot))
-#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[1024];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
-
-#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
-#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-#define pgd_clear(xp) do { } while (0)
-
-#define pgd_page_vaddr(pgd) \
- ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
- return pte; }
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_pages(unsigned context, unsigned long va,
- unsigned long pmdval, int count);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va,
- unsigned long pmdval);
-
-/*
- * Atomic PTE updates.
- *
- * pte_update clears and sets bit atomically, and returns
- * the old pte value. In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
- */
-#ifndef CONFIG_PTE_64BIT
-static inline unsigned long pte_update(pte_t *p, unsigned long clr,
- unsigned long set)
-{
- unsigned long old, tmp;
-
- __asm__ __volatile__("\
-1: lwarx %0,0,%3\n\
- andc %1,%0,%4\n\
- or %1,%1,%5\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%3\n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*p)
- : "r" (p), "r" (clr), "r" (set), "m" (*p)
- : "cc" );
- return old;
-}
-#else
-static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
- unsigned long set)
-{
- unsigned long long old;
- unsigned long tmp;
-
- __asm__ __volatile__("\
-1: lwarx %L0,0,%4\n\
- lwzx %0,0,%3\n\
- andc %1,%L0,%5\n\
- or %1,%1,%6\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%4\n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*p)
- : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
- : "cc" );
- return old;
-}
-#endif
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if _PAGE_HASHPTE != 0
- pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#else
- *ptep = pte;
-#endif
-}
-
-/*
- * 2.6 calles this without flushing the TLB entry, this is wrong
- * for our hash-based implementation, we fix that up here
- */
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
-{
- unsigned long old;
- old = pte_update(ptep, _PAGE_ACCESSED, 0);
-#if _PAGE_HASHPTE != 0
- if (old & _PAGE_HASHPTE) {
- unsigned long ptephys = __pa(ptep) & PAGE_MASK;
- flush_hash_pages(context, addr, ptephys, 1);
- }
-#endif
- return (old & _PAGE_ACCESSED) != 0;
-}
-#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
- __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
-}
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
- unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
- pte_update(ptep, 0, bits);
-}
-
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } \
- __changed; \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
-
-/*
- * Note that on Book E processors, the pmd contains the kernel virtual
- * (lowmem) address of the pte page. The physical address is less useful
- * because everything runs with translation enabled (even the TLB miss
- * handler). On everything else the pmd contains the physical address
- * of the pte page. -- paulus
- */
-#ifndef CONFIG_BOOKE
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd) \
- (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
-#else
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd) \
- (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
-#endif
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* Find an entry in the second-level page table.. */
-static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, addr) \
- ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir, addr) \
- ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
-#define pte_offset_map_nested(dir, addr) \
- ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
-
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-extern void paging_init(void);
-
-/*
- * Encode and decode a swap entry.
- * Note that the bits we use in a PTE for representing a swap entry
- * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
- *_PAGE_HASHPTE bit (if used). -- paulus
- */
-#define __swp_type(entry) ((entry).val & 0x1f)
-#define __swp_offset(entry) ((entry).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
-
-/* Encode and decode a nonlinear file mapping entry */
-#define PTE_FILE_MAX_BITS 29
-#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
-#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
-
-/* Values for nocacheflag and cmode */
-/* These are not used by the APUS kernel_map, but prevents
- compilation errors. */
-#define KERNELMAP_FULL_CACHING 0
-#define KERNELMAP_NOCACHE_SER 1
-#define KERNELMAP_NOCACHE_NONSER 2
-#define KERNELMAP_NO_COPYBACK 3
-
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp );
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode (unsigned long address, unsigned long size,
- unsigned int cmode);
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) (1)
-
-#ifdef CONFIG_PHYS_64BIT
-extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long paddr, unsigned long size, pgprot_t prot);
-
-static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- unsigned long vaddr,
- unsigned long pfn,
- unsigned long size,
- pgprot_t prot)
-{
- phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
- return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
-}
-#else
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-#endif
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
- pmd_t **pmdp);
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _PPC_PGTABLE_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h
deleted file mode 100644
index 6f6760b30dd..00000000000
--- a/include/asm-ppc/pnp.h
+++ /dev/null
@@ -1,645 +0,0 @@
-#ifdef __KERNEL__
-/* 11/02/95 */
-/*----------------------------------------------------------------------------*/
-/* Plug and Play header definitions */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for PnP on PowerPC Reference Platform */
-/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */
-/* (or later versions) is available on Compuserve in the PLUGPLAY area. */
-/* This code has extensions to that specification, namely new short and */
-/* long tag types for platform dependent information */
-
-/* Warning: LE notation used throughout this file */
-
-/* For enum's: if given in hex then they are bit significant, i.e. */
-/* only one bit is on for each enum */
-
-#ifndef _PNP_
-#define _PNP_
-
-#ifndef __ASSEMBLY__
-#define MAX_MEM_REGISTERS 9
-#define MAX_IO_PORTS 20
-#define MAX_IRQS 7
-/*#define MAX_DMA_CHANNELS 7*/
-
-/* Interrupt controllers */
-
-#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */
-#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */
-#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */
-#define PNPinterrupt3 "PNP0003" /* APIC */
-#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */
-
-/* Timers */
-
-#define PNPtimer0 "PNP0100" /* AT Timer */
-#define PNPtimer1 "PNP0101" /* EISA Timer */
-#define PNPtimer2 "PNP0102" /* MCA Timer */
-
-/* DMA controllers */
-
-#define PNPdma0 "PNP0200" /* AT DMA Controller */
-#define PNPdma1 "PNP0201" /* EISA DMA Controller */
-#define PNPdma2 "PNP0202" /* MCA DMA Controller */
-
-/* start of August 15, 1994 additions */
-/* CMOS */
-#define PNPCMOS "IBM0009" /* CMOS */
-
-/* L2 Cache */
-#define PNPL2 "IBM0007" /* L2 Cache */
-
-/* NVRAM */
-#define PNPNVRAM "IBM0008" /* NVRAM */
-
-/* Power Management */
-#define PNPPM "IBM0005" /* Power Management */
-/* end of August 15, 1994 additions */
-
-/* Keyboards */
-
-#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */
-#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */
-#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */
-#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */
-#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */
-#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */
-#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */
-#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */
-
-/* Parallel port controllers */
-
-#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */
-#define PNPparallel1 "PNP0401" /* ECP Parallel Port */
-#define PNPepp "IBM001C" /* EPP Parallel Port */
-
-/* Serial port controllers */
-
-#define PNPserial0 "PNP0500" /* Standard PC Serial port */
-#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */
-
-/* Disk controllers */
-
-#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */
-#define PNPdisk1 "PNP0601" /* Plus Hardcard II */
-#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */
-
-/* Diskette controllers */
-
-#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */
-
-/* Display controllers */
-
-#define PNPdisplay0 "PNP0900" /* VGA Compatible */
-#define PNPdisplay1 "PNP0901" /* Video Seven VGA */
-#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */
-#define PNPdisplay3 "PNP0903" /* Trident VGA */
-#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */
-#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */
-#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */
-#define PNPdisplay7 "PNP0907" /* Western Digital VGA */
-#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */
-#define PNPdisplay9 "PNP0909" /* S3 */
-#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */
-#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */
-#define PNPdisplayC "PNP090C" /* XGA Compatible */
-#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */
-#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */
-#define PNPdisplayF "PNP090F" /* Oak Technology VGA */
-
-/* Peripheral busses */
-
-#define PNPbuses0 "PNP0A00" /* ISA Bus */
-#define PNPbuses1 "PNP0A01" /* EISA Bus */
-#define PNPbuses2 "PNP0A02" /* MCA Bus */
-#define PNPbuses3 "PNP0A03" /* PCI Bus */
-#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */
-
-/* RTC, BIOS, planar devices */
-
-#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */
-#define PNPrtc0 "PNP0B00" /* AT RTC */
-#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */
-#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */
-#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */
-#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */
-
-/* PCMCIA controller */
-
-#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */
-
-/* Mice */
-
-#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */
-#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */
-#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */
-#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */
-#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */
-#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */
-#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */
-#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */
-#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */
-#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */
-#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */
-#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */
-
-/* Modems */
-
-#define PNPmodem0 "PNP9000" /* Specific IDs TBD */
-
-/* Network controllers */
-
-#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */
-#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */
-#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */
-#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */
-#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */
-#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */
-#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */
-#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */
-
-/* SCSI controllers */
-
-#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */
-#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */
-#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/
-#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */
-#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */
-#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */
-#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */
-
-/* Sound/Video, Multimedia */
-
-#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */
-#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */
-#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */
-#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */
-#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */
-#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */
-#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */
-#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */
-
-/* Operator Panel */
-#define PNPopctl "IBM000B" /* Operator's panel */
-
-/* Service Processor */
-#define PNPsp "IBM0011" /* IBM Service Processor */
-#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */
-#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */
-
-/* Memory Controller */
-#define PNPmemctl "IBM000A" /* Memory controller */
-
-/* Graphics Assist */
-#define PNPg_assist "IBM0014" /* Graphics Assist */
-
-/* Miscellaneous Device Controllers */
-#define PNPtablet "IBM0019" /* IBM Tablet Controller */
-
-/* PNP Packet Handles */
-
-#define S1_Packet 0x0A /* Version resource */
-#define S2_Packet 0x15 /* Logical DEVID (without flags) */
-#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */
-#define S3_Packet 0x1C /* Compatible device ID */
-#define S4_Packet 0x22 /* IRQ resource (without flags) */
-#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */
-#define S5_Packet 0x2A /* DMA resource */
-#define S6_Packet 0x30 /* Depend funct start (w/o priority) */
-#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */
-#define S7_Packet 0x38 /* Depend funct end */
-#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */
-#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */
-#define S14_Packet 0x71 /* Vendor defined */
-#define S15_Packet 0x78 /* End of resource (w/o checksum) */
-#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */
-#define L1_Packet 0x81 /* Memory range */
-#define L1_Shadow 0x20 /* Memory is shadowable */
-#define L1_32bit_mem 0x18 /* 32-bit memory only */
-#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */
-#define L1_Decode_Hi 0x04 /* decode supports high address */
-#define L1_Cache 0x02 /* read cacheable, write-through */
-#define L1_Writeable 0x01 /* Memory is writeable */
-#define L2_Packet 0x82 /* ANSI ID string */
-#define L3_Packet 0x83 /* Unicode ID string */
-#define L4_Packet 0x84 /* Vendor defined */
-#define L5_Packet 0x85 /* Large I/O */
-#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */
-#define END_TAG 0x78 /* End of resource */
-#define DF_START_TAG 0x30 /* Dependent function start */
-#define DF_START_TAG_priority 0x31 /* Dependent function start */
-#define DF_END_TAG 0x38 /* Dependent function end */
-#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */
-
-/* Device Base Type Codes */
-
-typedef enum _PnP_BASE_TYPE {
- Reserved = 0,
- MassStorageDevice = 1,
- NetworkInterfaceController = 2,
- DisplayController = 3,
- MultimediaController = 4,
- MemoryController = 5,
- BridgeController = 6,
- CommunicationsDevice = 7,
- SystemPeripheral = 8,
- InputDevice = 9,
- ServiceProcessor = 0x0A, /* 11/2/95 */
- } PnP_BASE_TYPE;
-
-/* Device Sub Type Codes */
-
-typedef enum _PnP_SUB_TYPE {
- SCSIController = 0,
- IDEController = 1,
- FloppyController = 2,
- IPIController = 3,
- OtherMassStorageController = 0x80,
-
- EthernetController = 0,
- TokenRingController = 1,
- FDDIController = 2,
- OtherNetworkController = 0x80,
-
- VGAController= 0,
- SVGAController= 1,
- XGAController= 2,
- OtherDisplayController = 0x80,
-
- VideoController = 0,
- AudioController = 1,
- OtherMultimediaController = 0x80,
-
- RAM = 0,
- FLASH = 1,
- OtherMemoryDevice = 0x80,
-
- HostProcessorBridge = 0,
- ISABridge = 1,
- EISABridge = 2,
- MicroChannelBridge = 3,
- PCIBridge = 4,
- PCMCIABridge = 5,
- VMEBridge = 6,
- OtherBridgeDevice = 0x80,
-
- RS232Device = 0,
- ATCompatibleParallelPort = 1,
- OtherCommunicationsDevice = 0x80,
-
- ProgrammableInterruptController = 0,
- DMAController = 1,
- SystemTimer = 2,
- RealTimeClock = 3,
- L2Cache = 4,
- NVRAM = 5,
- PowerManagement = 6,
- CMOS = 7,
- OperatorPanel = 8,
- ServiceProcessorClass1 = 9,
- ServiceProcessorClass2 = 0xA,
- ServiceProcessorClass3 = 0xB,
- GraphicAssist = 0xC,
- SystemPlanar = 0xF, /* 10/5/95 */
- OtherSystemPeripheral = 0x80,
-
- KeyboardController = 0,
- Digitizer = 1,
- MouseController = 2,
- TabletController = 3, /* 10/27/95 */
- OtherInputController = 0x80,
-
- GeneralMemoryController = 0,
- } PnP_SUB_TYPE;
-
-/* Device Interface Type Codes */
-
-typedef enum _PnP_INTERFACE {
- General = 0,
- GeneralSCSI = 0,
- GeneralIDE = 0,
- ATACompatible = 1,
-
- GeneralFloppy = 0,
- Compatible765 = 1,
- NS398_Floppy = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26E_Floppy = 3, /* Ports 26E and 26F */
- NS15C_Floppy = 4, /* Ports 15C and 15D */
- NS2E_Floppy = 5, /* Ports 2E and 2F */
- CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */
-
- GeneralIPI = 0,
-
- GeneralEther = 0,
- GeneralToken = 0,
- GeneralFDDI = 0,
-
- GeneralVGA = 0,
- GeneralSVGA = 0,
- GeneralXGA = 0,
-
- GeneralVideo = 0,
- GeneralAudio = 0,
- CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */
-
- GeneralRAM = 0,
- GeneralFLASH = 0,
- PCIMemoryController = 0, /* PCI Config Method */
- RS6KMemoryController = 1, /* RS6K Config Method */
-
- GeneralHostBridge = 0,
- GeneralISABridge = 0,
- GeneralEISABridge = 0,
- GeneralMCABridge = 0,
- GeneralPCIBridge = 0,
- PCIBridgeDirect = 0,
- PCIBridgeIndirect = 1,
- PCIBridgeRS6K = 2,
- GeneralPCMCIABridge = 0,
- GeneralVMEBridge = 0,
-
- GeneralRS232 = 0,
- COMx = 1,
- Compatible16450 = 2,
- Compatible16550 = 3,
- NS398SerPort = 4, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26ESerPort = 5, /* Ports 26E and 26F */
- NS15CSerPort = 6, /* Ports 15C and 15D */
- NS2ESerPort = 7, /* Ports 2E and 2F */
-
- GeneralParPort = 0,
- LPTx = 1,
- NS398ParPort = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26EParPort = 3, /* Ports 26E and 26F */
- NS15CParPort = 4, /* Ports 15C and 15D */
- NS2EParPort = 5, /* Ports 2E and 2F */
-
- GeneralPIC = 0,
- ISA_PIC = 1,
- EISA_PIC = 2,
- MPIC = 3,
- RS6K_PIC = 4,
-
- GeneralDMA = 0,
- ISA_DMA = 1,
- EISA_DMA = 2,
-
- GeneralTimer = 0,
- ISA_Timer = 1,
- EISA_Timer = 2,
- GeneralRTC = 0,
- ISA_RTC = 1,
-
- StoreThruOnly = 1,
- StoreInEnabled = 2,
- RS6KL2Cache = 3,
-
- IndirectNVRAM = 0, /* Indirectly addressed */
- DirectNVRAM = 1, /* Memory Mapped */
- IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */
-
- GeneralPowerManagement = 0,
- EPOWPowerManagement = 1,
- PowerControl = 2, // d1378
-
- GeneralCMOS = 0,
-
- GeneralOPPanel = 0,
- HarddiskLight = 1,
- CDROMLight = 2,
- PowerLight = 3,
- KeyLock = 4,
- ANDisplay = 5, /* AlphaNumeric Display */
- SystemStatusLED = 6, /* 3 digit 7 segment LED */
- CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */
-
- GeneralServiceProcessor = 0,
-
- TransferData = 1,
- IGMC32 = 2,
- IGMC64 = 3,
-
- GeneralSystemPlanar = 0, /* 10/5/95 */
-
- } PnP_INTERFACE;
-
-/* PnP resources */
-
-/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
-
-typedef struct _SERIAL_ID {
- unsigned char VendorID0; /* Bit(7)=0 */
- /* Bits(6:2)=1st character in */
- /* compressed ASCII */
- /* Bits(1:0)=2nd character in */
- /* compressed ASCII bits(4:3) */
- unsigned char VendorID1; /* Bits(7:5)=2nd character in */
- /* compressed ASCII bits(2:0) */
- /* Bits(4:0)=3rd character in */
- /* compressed ASCII */
- unsigned char VendorID2; /* Product number - vendor assigned */
- unsigned char VendorID3; /* Product number - vendor assigned */
-
-/* Serial number is to provide uniqueness if more than one board of same */
-/* type is in system. Must be "FFFFFFFF" if feature not supported. */
-
- unsigned char Serial0; /* Unique serial number bits (7:0) */
- unsigned char Serial1; /* Unique serial number bits (15:8) */
- unsigned char Serial2; /* Unique serial number bits (23:16) */
- unsigned char Serial3; /* Unique serial number bits (31:24) */
- unsigned char Checksum;
- } SERIAL_ID;
-
-typedef enum _PnPItemName {
- Unused = 0,
- PnPVersion = 1,
- LogicalDevice = 2,
- CompatibleDevice = 3,
- IRQFormat = 4,
- DMAFormat = 5,
- StartDepFunc = 6,
- EndDepFunc = 7,
- IOPort = 8,
- FixedIOPort = 9,
- Res1 = 10,
- Res2 = 11,
- Res3 = 12,
- SmallVendorItem = 14,
- EndTag = 15,
- MemoryRange = 1,
- ANSIIdentifier = 2,
- UnicodeIdentifier = 3,
- LargeVendorItem = 4,
- MemoryRange32 = 5,
- MemoryRangeFixed32 = 6,
- } PnPItemName;
-
-/* Define a bunch of access functions for the bits in the tag field */
-
-/* Tag type - 0 = small; 1 = large */
-#define tag_type(t) (((t) & 0x80)>>7)
-#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
-
-/* Small item name is 4 bits - one of PnPItemName enum above */
-#define tag_small_item_name(t) (((t) & 0x78)>>3)
-#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
-
-/* Small item count is 3 bits - count of further bytes in packet */
-#define tag_small_count(t) ((t) & 0x07)
-#define set_tag_count(t,v) (t = (t & 0x78) | (v))
-
-/* Large item name is 7 bits - one of PnPItemName enum above */
-#define tag_large_item_name(t) ((t) & 0x7f)
-#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
-
-/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
-
-typedef union _PnP_TAG_PACKET {
- struct _S1_Pack{ /* VERSION PACKET */
- unsigned char Tag; /* small tag = 0x0a */
- unsigned char Version[2]; /* PnP version, Vendor version */
- } S1_Pack;
-
- struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x15 or 0x16 */
- unsigned char DevId[4]; /* Logical device id */
- unsigned char Flags[2]; /* bit(0) boot device; */
- /* bit(7:1) cmd in range x31-x37 */
- /* bit(7:0) cmd in range x28-x3f (opt)*/
- } S2_Pack;
-
- struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x1c */
- unsigned char CompatId[4]; /* Compatible device id */
- } S3_Pack;
-
- struct _S4_Pack{ /* IRQ PACKET */
- unsigned char Tag; /* small tag = 0x22 or 0x23 */
- unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */
- /* bit(0) is IRQ8 ... */
- unsigned char IRQInfo; /* optional; assume bit(0)=1; else */
- /* bit(0) - high true edge sensitive */
- /* bit(1) - low true edge sensitive */
- /* bit(2) - high true level sensitive*/
- /* bit(3) - low true level sensitive */
- /* bit(7:4) - must be 0 */
- } S4_Pack;
-
- struct _S5_Pack{ /* DMA PACKET */
- unsigned char Tag; /* small tag = 0x2a */
- unsigned char DMAMask; /* bit(0) is channel 0 ... */
- unsigned char DMAInfo;
- } S5_Pack;
-
- struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x30 or 0x31 */
- unsigned char Priority; /* Optional; if missing then x01; else*/
- /* x00 = best possible */
- /* x01 = acceptible */
- /* x02 = sub-optimal but functional */
- } S6_Pack;
-
- struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x38 */
- } S7_Pack;
-
- struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */
- unsigned char Tag; /* small tag x47 */
- unsigned char IOInfo; /* x0 = decode only bits(9:0); */
-#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */
- unsigned char RangeMin[2]; /* Min base address */
- unsigned char RangeMax[2]; /* Max base address */
- unsigned char IOAlign; /* base alignmt, incr in 1B blocks */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S8_Pack;
-
- struct _S9_Pack{ /* FIXED I/O PORT PACKET */
- unsigned char Tag; /* small tag = 0x4b */
- unsigned char Range[2]; /* base address 10 bits */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S9_Pack;
-
- struct _S14_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* small tag = 0x7m m = 1-7 */
- union _S14_Data{
- unsigned char Data[7]; /* Vendor defined */
- struct _S14_PPCPack{ /* Pr*p s14 pack */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[6]; /* Vendor defined */
- } S14_PPCPack;
- } S14_Data;
- } S14_Pack;
-
- struct _S15_Pack{ /* END PACKET */
- unsigned char Tag; /* small tag = 0x78 or 0x79 */
- unsigned char Check; /* optional - checksum */
- } S15_Pack;
-
- struct _L1_Pack{ /* MEMORY RANGE PACKET */
- unsigned char Tag; /* large tag = 0x81 */
- unsigned char Count0; /* x09 */
- unsigned char Count1; /* x00 */
- unsigned char Data[9]; /* a variable array of bytes, */
- /* count in tag */
- } L1_Pack;
-
- struct _L2_Pack{ /* ANSI ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x82 */
- unsigned char Count0; /* Length of string */
- unsigned char Count1;
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L2_Pack;
-
- struct _L3_Pack{ /* UNICODE ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x83 */
- unsigned char Count0; /* Length + 2 of string */
- unsigned char Count1;
- unsigned char Country0; /* TBD */
- unsigned char Country1; /* TBD */
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L3_Pack;
-
- struct _L4_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* large tag = 0x84 */
- unsigned char Count0;
- unsigned char Count1;
- union _L4_Data{
- unsigned char Data[1]; /* a variable array of bytes, */
- /* count in tag */
- struct _L4_PPCPack{ /* Pr*p L4 packet */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[1]; /* a variable array of bytes, */
- /* count in tag */
- } L4_PPCPack;
- } L4_Data;
- } L4_Pack;
-
- struct _L5_Pack{
- unsigned char Tag; /* large tag = 0x85 */
- unsigned char Count0; /* Count = 17 */
- unsigned char Count1;
- unsigned char Data[17];
- } L5_Pack;
-
- struct _L6_Pack{
- unsigned char Tag; /* large tag = 0x86 */
- unsigned char Count0; /* Count = 9 */
- unsigned char Count1;
- unsigned char Data[9];
- } L6_Pack;
-
- } PnP_TAG_PACKET;
-
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _PNP_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h
deleted file mode 100644
index 935d1e05366..00000000000
--- a/include/asm-ppc/ppc4xx_dma.h
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * include/asm-ppc/ppc4xx_dma.h
- *
- * IBM PPC4xx DMA engine library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASMPPC_PPC4xx_DMA_H
-#define __ASMPPC_PPC4xx_DMA_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-#include <asm/ibm4xx.h>
-
-#undef DEBUG_4xxDMA
-
-#define MAX_PPC4xx_DMA_CHANNELS 4
-
-/*
- * Function return status codes
- * These values are used to indicate whether or not the function
- * call was successful, or a bad/invalid parameter was passed.
- */
-#define DMA_STATUS_GOOD 0
-#define DMA_STATUS_BAD_CHANNEL 1
-#define DMA_STATUS_BAD_HANDLE 2
-#define DMA_STATUS_BAD_MODE 3
-#define DMA_STATUS_NULL_POINTER 4
-#define DMA_STATUS_OUT_OF_MEMORY 5
-#define DMA_STATUS_SGL_LIST_EMPTY 6
-#define DMA_STATUS_GENERAL_ERROR 7
-#define DMA_STATUS_CHANNEL_NOTFREE 8
-
-#define DMA_CHANNEL_BUSY 0x80000000
-
-/*
- * These indicate status as returned from the DMA Status Register.
- */
-#define DMA_STATUS_NO_ERROR 0
-#define DMA_STATUS_CS 1 /* Count Status */
-#define DMA_STATUS_TS 2 /* Transfer Status */
-#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */
-#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */
-
-
-/*
- * DMA Channel Control Registers
- */
-
-#ifdef CONFIG_44x
-#define PPC4xx_DMA_64BIT
-#define DMA_CR_OFFSET 1
-#else
-#define DMA_CR_OFFSET 0
-#endif
-
-#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */
-#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
-#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
-
-#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */
-#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
-#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
-
-#define DMA_TD (1<<29)
-#define SET_DMA_TD(x) (((x)&0x1)<<29)
-#define GET_DMA_TD(x) (((x)&DMA_TD)>>29)
-
-#define DMA_PL (1<<28) /* Peripheral Location */
-#define SET_DMA_PL(x) (((x)&0x1)<<28)
-#define GET_DMA_PL(x) (((x)&DMA_PL)>>28)
-
-#define EXTERNAL_PERIPHERAL 0
-#define INTERNAL_PERIPHERAL 1
-
-#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */
-#define DMA_PW_MASK SET_DMA_PW(3)
-#define PW_8 0
-#define PW_16 1
-#define PW_32 2
-#define PW_64 3
-/* FIXME: Add PW_128 support for 440GP DMA block */
-#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
-
-#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */
-#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET))
-
-#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */
-#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET))
-
-#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */
-#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET))
-
-#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */
-#define DMA_TM_MASK SET_DMA_TM(3)
-#define TM_PERIPHERAL 0 /* Peripheral */
-#define TM_RESERVED 1 /* Reserved */
-#define TM_S_MM 2 /* Memory to Memory */
-#define TM_D_MM 3 /* Device Paced Memory to Memory */
-#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
-
-#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */
-#define DMA_PSC_MASK SET_DMA_PSC(3)
-#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
-
-#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */
-#define DMA_PWC_MASK SET_DMA_PWC(0x3F)
-#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
-
-#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */
-#define DMA_PHC_MASK SET_DMA_PHC(0x7)
-#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
-
-#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */
-#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET))
-
-#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
-#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
-
-#define DMA_DEC (1<<(2)) /* Address Decrement */
-#define SET_DMA_DEC(x) (((x)&0x1)<<2)
-#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
-
-
-/*
- * Transfer Modes
- * These modes are defined in a way that makes it possible to
- * simply "or" in the value in the control register.
- */
-
-#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */
-
- /* Device-paced memory to memory, */
- /* device is at source address */
-#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM))
-
- /* Device-paced memory to memory, */
- /* device is at destination address */
-#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM))
-
-/* 405gp/440gp */
-#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */
-#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3)
-#define PREFETCH_1 0 /* Prefetch 1 Double Word */
-#define PREFETCH_2 1
-#define PREFETCH_4 2
-#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
-
-#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */
-#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET))
-#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
-
-/* stb3x */
-
-#define DMA_ECE_ENABLE (1<<5)
-#define SET_DMA_ECE(x) (((x)&0x1)<<5)
-#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
-
-#define DMA_TCD_DISABLE (1<<4)
-#define SET_DMA_TCD(x) (((x)&0x1)<<4)
-#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
-
-typedef uint32_t sgl_handle_t;
-
-#ifdef CONFIG_PPC4xx_EDMA
-
-#define SGL_LIST_SIZE 4096
-#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
-
-#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
-#define PRIORITY_LOW 0
-#define PRIORITY_MID_LOW 1
-#define PRIORITY_MID_HIGH 2
-#define PRIORITY_HIGH 3
-#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
-
-/*
- * DMA Polarity Configuration Register
- */
-#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
-#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
-#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */
-
-/*
- * DMA Sleep Mode Register
- */
-#define SLEEP_MODE_ENABLE (1<<21)
-
-/*
- * DMA Status Register
- */
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<18)
-#define DMA_IN_DMA_REQ2 (1<<17)
-#define DMA_IN_DMA_REQ3 (1<<16)
-
-#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<14)
-#define DMA_EXT_DMA_REQ2 (1<<13)
-#define DMA_EXT_DMA_REQ3 (1<<12)
-
-#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<10)
-#define DMA_CH2_BUSY (1<<9)
-#define DMA_CH3_BUSY (1<<8)
-
-#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */
-#define DMA_SG1 (1<<6)
-#define DMA_SG2 (1<<5)
-#define DMA_SG3 (1<<4)
-
-/* DMA Channel Count Register */
-#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
-#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
-#define DMA_CTC_BSIZ_2 (0)
-#define DMA_CTC_BSIZ_4 (1<<21)
-#define DMA_CTC_BSIZ_8 (2<<21)
-#define DMA_CTC_BSIZ_16 (3<<21)
-
-/*
- * DMA SG Command Register
- */
-#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */
-#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */
-
-/*
- * DMA Scatter/Gather Descriptor Bit fields
- */
-#define SG_LINK (1<<31) /* Link */
-#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */
-#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */
-#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */
-#define SG_COUNT_MASK 0xFFFF /* Count Field */
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_PREFETCH(p_init->pf) /* read prefetch */)
-
-#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
-
-#elif defined(CONFIG_STB03xxx) /* stb03xxx */
-
-#define DMA_PPC4xx_SIZE 4096
-
-/*
- * DMA Status Register
- */
-
-#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK 0x00800001
-#define PRIORITY_LOW 0x00000000
-#define PRIORITY_MID_LOW 0x00000001
-#define PRIORITY_MID_HIGH 0x00800000
-#define PRIORITY_HIGH 0x00800001
-#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
-
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_CT0 (1<<19) /* Chained transfere */
-
-#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<17)
-#define DMA_IN_DMA_REQ2 (1<<16)
-#define DMA_IN_DMA_REQ3 (1<<15)
-
-#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<13)
-#define DMA_EXT_DMA_REQ2 (1<<12)
-#define DMA_EXT_DMA_REQ3 (1<<11)
-
-#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<9)
-#define DMA_CH2_BUSY (1<<8)
-#define DMA_CH3_BUSY (1<<7)
-
-#define DMA_CT1 (1<<6) /* Chained transfere */
-#define DMA_CT2 (1<<5)
-#define DMA_CT3 (1<<4)
-
-#define DMA_CH_ENABLE (1<<7)
-#define SET_DMA_CH(x) (((x)&0x1)<<7)
-#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
-
-/* STBx25xxx dma unique */
-/* enable device port on a dma channel
- * example ext 0 on dma 1
- */
-
-#define SSP0_RECV 15
-#define SSP0_XMIT 14
-#define EXT_DMA_0 12
-#define SC1_XMIT 11
-#define SC1_RECV 10
-#define EXT_DMA_2 9
-#define EXT_DMA_3 8
-#define SERIAL2_XMIT 7
-#define SERIAL2_RECV 6
-#define SC0_XMIT 5
-#define SC0_RECV 4
-#define SERIAL1_XMIT 3
-#define SERIAL1_RECV 2
-#define SERIAL0_XMIT 1
-#define SERIAL0_RECV 0
-
-#define DMA_CHAN_0 1
-#define DMA_CHAN_1 2
-#define DMA_CHAN_2 3
-#define DMA_CHAN_3 4
-
-/* end STBx25xx */
-
-/*
- * Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
- */
-#define DMA_CR_MB0 0x2
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \
- SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \
- SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \
- DMA_CR_MB0 /* must be one */)
-
-#define GET_DMA_POLARITY(chan) chan
-
-#endif
-
-typedef struct {
- unsigned short in_use; /* set when channel is being used, clr when
- * available.
- */
- /*
- * Valid polarity settings:
- * DMAReq_ActiveLow(n)
- * DMAAck_ActiveLow(n)
- * EOT_ActiveLow(n)
- *
- * n is 0 to max dma chans
- */
- unsigned int polarity;
-
- char buffer_enable; /* Boolean: buffer enable */
- char tce_enable; /* Boolean: terminal count enable */
- char etd_output; /* Boolean: eot pin is a tc output */
- char pce; /* Boolean: parity check enable */
-
- /*
- * Peripheral location:
- * INTERNAL_PERIPHERAL (UART0 on the 405GP)
- * EXTERNAL_PERIPHERAL
- */
- char pl; /* internal/external peripheral */
-
- /*
- * Valid pwidth settings:
- * PW_8
- * PW_16
- * PW_32
- * PW_64
- */
- unsigned int pwidth;
-
- char dai; /* Boolean: dst address increment */
- char sai; /* Boolean: src address increment */
-
- /*
- * Valid psc settings: 0-3
- */
- unsigned int psc; /* Peripheral Setup Cycles */
-
- /*
- * Valid pwc settings:
- * 0-63
- */
- unsigned int pwc; /* Peripheral Wait Cycles */
-
- /*
- * Valid phc settings:
- * 0-7
- */
- unsigned int phc; /* Peripheral Hold Cycles */
-
- /*
- * Valid cp (channel priority) settings:
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- */
- unsigned int cp; /* channel priority */
-
- /*
- * Valid pf (memory read prefetch) settings:
- *
- * PREFETCH_1
- * PREFETCH_2
- * PREFETCH_4
- */
- unsigned int pf; /* memory read prefetch */
-
- /*
- * Boolean: channel interrupt enable
- * NOTE: for sgl transfers, only the last descriptor will be setup to
- * interrupt.
- */
- char int_enable;
-
- char shift; /* easy access to byte_count shift, based on */
- /* the width of the channel */
-
- uint32_t control; /* channel control word */
-
- /* These variabled are used ONLY in single dma transfers */
- unsigned int mode; /* transfer mode */
- phys_addr_t addr;
- char ce; /* channel enable */
-#ifdef CONFIG_STB03xxx
- char ch_enable;
- char tcd_disable;
- char ece_enable;
- char td; /* transfer direction */
-#endif
-
- char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
-} ppc_dma_ch_t;
-
-/*
- * PPC44x DMA implementations have a slightly different
- * descriptor layout. Probably moved about due to the
- * change to 64-bit addresses and link pointer. I don't
- * know why they didn't just leave control_count after
- * the dst_addr.
- */
-#ifdef PPC4xx_DMA_64BIT
-typedef struct {
- uint32_t control;
- uint32_t control_count;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- phys_addr_t next;
-} ppc_sgl_t;
-#else
-typedef struct {
- uint32_t control;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- uint32_t control_count;
- uint32_t next;
-} ppc_sgl_t;
-#endif
-
-typedef struct {
- unsigned int dmanr;
- uint32_t control; /* channel ctrl word; loaded from each descrptr */
- uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */
- dma_addr_t dma_addr; /* dma (physical) address of this list */
- ppc_sgl_t *phead;
- dma_addr_t phead_dma;
- ppc_sgl_t *ptail;
- dma_addr_t ptail_dma;
-} sgl_list_info_t;
-
-typedef struct {
- phys_addr_t *src_addr;
- phys_addr_t *dst_addr;
- phys_addr_t dma_src_addr;
- phys_addr_t dma_dst_addr;
-} pci_alloc_desc_t;
-
-extern ppc_dma_ch_t dma_channels[];
-
-/*
- * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
- */
-extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
-extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
-extern void ppc4xx_set_sg_addr(int, phys_addr_t);
-extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
-extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
-extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
-extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
-extern void ppc4xx_free_dma_handle(sgl_handle_t);
-extern int ppc4xx_get_dma_status(void);
-extern int ppc4xx_enable_burst(unsigned int);
-extern int ppc4xx_disable_burst(unsigned int);
-extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
-extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
-extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
-extern void ppc4xx_enable_dma(unsigned int dmanr);
-extern void ppc4xx_disable_dma(unsigned int dmanr);
-extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
-extern int ppc4xx_get_dma_residue(unsigned int dmanr);
-extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
- phys_addr_t dst_dma_addr);
-extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_clr_dma_status(unsigned int dmanr);
-extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
-
-/* These are in kernel/dma.c: */
-
-/* reserve a DMA channel */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-/* release it again */
-extern void free_dma(unsigned int dmanr);
-#endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_pic.h b/include/asm-ppc/ppc4xx_pic.h
deleted file mode 100644
index e44261206f8..00000000000
--- a/include/asm-ppc/ppc4xx_pic.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/asm-ppc/ppc4xx_pic.h
- *
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC4XX_PIC_H__
-#define __PPC4XX_PIC_H__
-
-#include <linux/types.h>
-#include <linux/irq.h>
-
-/* "Fixed" UIC settings (they are chip, not board specific),
- * e.g. polarity/triggerring for internal interrupt sources.
- *
- * Platform port should provide NR_UICS-sized array named ppc4xx_core_uic_cfg
- * with these "fixed" settings: .polarity contains exact value which will
- * be written (masked with "ext_irq_mask") into UICx_PR register,
- * .triggering - to UICx_TR.
- *
- * Settings for external IRQs can be specified separately by the
- * board support code. In this case properly sized array of unsigned
- * char named ppc4xx_uic_ext_irq_cfg should be filled with correct
- * values using IRQ_SENSE_XXXXX and IRQ_POLARITY_XXXXXXX defines.
- *
- * If these arrays aren't provided, UIC initialization code keeps firmware
- * configuration. Also, ppc4xx_uic_ext_irq_cfg implies ppc4xx_core_uic_cfg
- * is defined.
- *
- * Both ppc4xx_core_uic_cfg and ppc4xx_uic_ext_irq_cfg are declared as
- * "weak" symbols in ppc4xx_pic.c
- *
- */
-struct ppc4xx_uic_settings {
- u32 polarity;
- u32 triggering;
- u32 ext_irq_mask;
-};
-
-extern void ppc4xx_pic_init(void);
-
-#endif /* __PPC4XX_PIC_H__ */
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
deleted file mode 100644
index d2fee41d600..00000000000
--- a/include/asm-ppc/ppc_sys.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-ppc/ppc_sys.h
- *
- * PPC system definitions and library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_SYS_H
-#define __ASM_PPC_SYS_H
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#if defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_PPC_MPC52xx)
-#include <asm/mpc52xx.h>
-#elif defined(CONFIG_MPC10X_BRIDGE)
-#include <asm/mpc10x.h>
-#else
-#error "need definition of ppc_sys_devices"
-#endif
-
-#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001
-
-struct ppc_sys_spec {
- /* PPC sys is matched via (ID & mask) == value, id could be
- * PVR, SVR, IMMR, * etc. */
- u32 mask;
- u32 value;
- u32 num_devices;
- char *ppc_sys_name;
- u8 config[NUM_PPC_SYS_DEVS];
- enum ppc_sys_devices *device_list;
-};
-
-struct platform_notify_dev_map {
- const char *bus_id;
- void (*rtn)(struct platform_device * pdev, int idx);
-};
-
-enum platform_device_func {
- PPC_SYS_FUNC_DUMMY = 0,
- PPC_SYS_FUNC_ETH = 1,
- PPC_SYS_FUNC_UART = 2,
- PPC_SYS_FUNC_HLDC = 3,
- PPC_SYS_FUNC_USB = 4,
- PPC_SYS_FUNC_IRDA = 5,
-};
-
-#define PPC_SYS_CONFIG_DISABLED 1
-
-/* describes all specific chips and which devices they have on them */
-extern struct ppc_sys_spec ppc_sys_specs[];
-extern struct ppc_sys_spec *cur_ppc_sys_spec;
-
-/* determine which specific SOC we are */
-extern void identify_ppc_sys_by_id(u32 id) __init;
-extern void identify_ppc_sys_by_name(char *name) __init;
-extern void identify_ppc_sys_by_name_and_id(char *name, u32 id) __init;
-
-/* describes all devices that may exist in a given family of processors */
-extern struct platform_device ppc_sys_platform_devices[];
-
-/* allow any platform_device fixup to occur before device is registered */
-extern int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-/* Update all memory resources by paddr, call before platform_device_register */
-extern void ppc_sys_fixup_mem_resource(struct platform_device *pdev,
- phys_addr_t paddr) __init;
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-extern void *ppc_sys_get_pdata(enum ppc_sys_devices dev) __init;
-
-/* remove a device from the system */
-extern void ppc_sys_device_remove(enum ppc_sys_devices dev);
-
-/* Function assignment stuff */
-void ppc_sys_device_initfunc(void);
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
- enum platform_device_func func);
-void ppc_sys_device_set_func_all(enum platform_device_func func);
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
- struct device *dev);
-
-/* Enable / disable stuff */
-void ppc_sys_device_disable(enum ppc_sys_devices dev);
-void ppc_sys_device_enable(enum ppc_sys_devices dev);
-void ppc_sys_device_enable_all(void);
-void ppc_sys_device_disable_all(void);
-
-#endif /* __ASM_PPC_SYS_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
deleted file mode 100644
index 3819e17cd7b..00000000000
--- a/include/asm-ppc/ppcboot.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_PPCBOOT_H__
-#define __ASM_PPCBOOT_H__
-
-/*
- * Board information passed to kernel from PPCBoot
- *
- * include/asm-ppc/ppcboot.h
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- unsigned long bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
-#if defined(CONFIG_8xx) || defined(CONFIG_CPM2)
- unsigned long bi_immr_base; /* base of IMMR register */
-#endif
-#if defined(CONFIG_PPC_MPC52xx)
- unsigned long bi_mbar_base; /* base of internal registers */
-#endif
- unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet address */
- unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
- unsigned long bi_intfreq; /* Internal Freq, in MHz */
- unsigned long bi_busfreq; /* Bus Freq, in MHz */
-#if defined(CONFIG_CPM2)
- unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
- unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
- unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
- unsigned long bi_vco; /* VCO Out from PLL, in MHz */
-#endif
-#if defined(CONFIG_PPC_MPC52xx)
- unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
- unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
-#endif
- unsigned long bi_baudrate; /* Console Baudrate */
-#if defined(CONFIG_4xx)
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
- unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
- unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x)
- /* second onboard ethernet port */
- unsigned char bi_enet1addr[6];
-#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX)
- /* third onboard ethernet ports */
- unsigned char bi_enet2addr[6];
-#endif
-#if defined(CONFIG_440GX)
- /* fourth onboard ethernet ports */
- unsigned char bi_enet3addr[6];
-#endif
-#if defined(CONFIG_4xx)
- unsigned int bi_opbfreq; /* OB clock in Hz */
- int bi_iic_fast[2]; /* Use fast i2c mode */
-#endif
-#if defined(CONFIG_440GX)
- int bi_phynum[4]; /* phy mapping */
- int bi_phymode[4]; /* phy mode */
-#endif
-} bd_t;
-
-#define bi_tbfreq bi_intfreq
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_PPCBOOT_H__ */
diff --git a/include/asm-ppc/prep_nvram.h b/include/asm-ppc/prep_nvram.h
deleted file mode 100644
index 6dbc36a84df..00000000000
--- a/include/asm-ppc/prep_nvram.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * PreP compliant NVRAM access
- */
-
-/* Corey Minyard (minyard@acm.org) - Stolen from PReP book. Per the
- license I must say:
- (C) Copyright (Corey Minyard), (1998). All rights reserved
- */
-
-/* Structure map for NVRAM on PowerPC Reference Platform */
-/* All fields are either character/byte strings which are valid either
- endian or they are big-endian numbers.
-
- There are a number of Date and Time fields which are in RTC format,
- big-endian. These are stored in UT (GMT).
-
- For enum's: if given in hex then they are bit significant, i.e. only
- one bit is on for each enum.
-*/
-#ifdef __KERNEL__
-#ifndef _PPC_PREP_NVRAM_H
-#define _PPC_PREP_NVRAM_H
-
-#define MAX_PREP_NVRAM 0x8000
-#define PREP_NVRAM_AS0 0x74
-#define PREP_NVRAM_AS1 0x75
-#define PREP_NVRAM_DATA 0x77
-
-#define NVSIZE 4096 /* size of NVRAM */
-#define OSAREASIZE 512 /* size of OSArea space */
-#define CONFSIZE 1024 /* guess at size of Configuration space */
-
-typedef struct _SECURITY {
- unsigned long BootErrCnt; /* Count of boot password errors */
- unsigned long ConfigErrCnt; /* Count of config password errors */
- unsigned long BootErrorDT[2]; /* Date&Time from RTC of last error in pw */
- unsigned long ConfigErrorDT[2]; /* Date&Time from RTC of last error in pw */
- unsigned long BootCorrectDT[2]; /* Date&Time from RTC of last correct pw */
- unsigned long ConfigCorrectDT[2]; /* Date&Time from RTC of last correct pw */
- unsigned long BootSetDT[2]; /* Date&Time from RTC of last set of pw */
- unsigned long ConfigSetDT[2]; /* Date&Time from RTC of last set of pw */
- unsigned char Serial[16]; /* Box serial number */
-} SECURITY;
-
-typedef enum _OS_ID {
- Unknown = 0,
- Firmware = 1,
- AIX = 2,
- NT = 3,
- MKOS2 = 4,
- MKAIX = 5,
- Taligent = 6,
- Solaris = 7,
- MK = 12
-} OS_ID;
-
-typedef struct _ERROR_LOG {
- unsigned char ErrorLogEntry[40]; /* To be architected */
-} ERROR_LOG;
-
-typedef enum _BOOT_STATUS {
- BootStarted = 0x01,
- BootFinished = 0x02,
- RestartStarted = 0x04,
- RestartFinished = 0x08,
- PowerFailStarted = 0x10,
- PowerFailFinished = 0x20,
- ProcessorReady = 0x40,
- ProcessorRunning = 0x80,
- ProcessorStart = 0x0100
-} BOOT_STATUS;
-
-typedef struct _RESTART_BLOCK {
- unsigned short Version;
- unsigned short Revision;
- unsigned long ResumeReserve1[2];
- volatile unsigned long BootStatus;
- unsigned long CheckSum; /* Checksum of RESTART_BLOCK */
- void * RestartAddress;
- void * SaveAreaAddr;
- unsigned long SaveAreaLength;
-} RESTART_BLOCK;
-
-typedef enum _OSAREA_USAGE {
- Empty = 0,
- Used = 1
-} OSAREA_USAGE;
-
-typedef enum _PM_MODE {
- Suspend = 0x80, /* Part of state is in memory */
- Normal = 0x00 /* No power management in effect */
-} PMMODE;
-
-typedef struct _HEADER {
- unsigned short Size; /* NVRAM size in K(1024) */
- unsigned char Version; /* Structure map different */
- unsigned char Revision; /* Structure map the same -may
- be new values in old fields
- in other words old code still works */
- unsigned short Crc1; /* check sum from beginning of nvram to OSArea */
- unsigned short Crc2; /* check sum of config */
- unsigned char LastOS; /* OS_ID */
- unsigned char Endian; /* B if big endian, L if little endian */
- unsigned char OSAreaUsage; /* OSAREA_USAGE */
- unsigned char PMMode; /* Shutdown mode */
- RESTART_BLOCK RestartBlock;
- SECURITY Security;
- ERROR_LOG ErrorLog[2];
-
- /* Global Environment information */
- void * GEAddress;
- unsigned long GELength;
-
- /* Date&Time from RTC of last change to Global Environment */
- unsigned long GELastWriteDT[2];
-
- /* Configuration information */
- void * ConfigAddress;
- unsigned long ConfigLength;
-
- /* Date&Time from RTC of last change to Configuration */
- unsigned long ConfigLastWriteDT[2];
- unsigned long ConfigCount; /* Count of entries in Configuration */
-
- /* OS dependent temp area */
- void * OSAreaAddress;
- unsigned long OSAreaLength;
-
- /* Date&Time from RTC of last change to OSAreaArea */
- unsigned long OSAreaLastWriteDT[2];
-} HEADER;
-
-/* Here is the whole map of the NVRAM */
-typedef struct _NVRAM_MAP {
- HEADER Header;
- unsigned char GEArea[NVSIZE-CONFSIZE-OSAREASIZE-sizeof(HEADER)];
- unsigned char OSArea[OSAREASIZE];
- unsigned char ConfigArea[CONFSIZE];
-} NVRAM_MAP;
-
-/* Routines to manipulate the NVRAM */
-void init_prep_nvram(void);
-char *prep_nvram_get_var(const char *name);
-char *prep_nvram_first_var(void);
-char *prep_nvram_next_var(char *name);
-
-/* Routines to read and write directly to the NVRAM */
-unsigned char prep_nvram_read_val(int addr);
-void prep_nvram_write_val(int addr,
- unsigned char val);
-
-#endif /* _PPC_PREP_NVRAM_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
deleted file mode 100644
index 71f4c996fe7..00000000000
--- a/include/asm-ppc/prom.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-#ifdef __KERNEL__
-#ifndef _PPC_PROM_H
-#define _PPC_PROM_H
-
-/* This is used in arch/ppc/mm/mem_pieces.h */
-struct reg_property {
- unsigned int address;
- unsigned int size;
-};
-
-/*
- * These macros assist in performing the address calculations that we
- * need to do to access data when the kernel is running at an address
- * that is different from the address that the kernel is linked at.
- * The reloc_offset() function returns the difference between these
- * two addresses and the macros simplify the process of adding or
- * subtracting this offset to/from pointer values.
- */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern unsigned long sub_reloc_offset(unsigned long);
-
-#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x)))
-#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x)))
-
-/*
- * Fallback definitions since we don't support OF in arch/ppc any more.
- */
-#define machine_is_compatible(x) 0
-#define of_find_compatible_node(f, t, c) NULL
-#define of_get_property(p, n, l) NULL
-
-#endif /* _PPC_PROM_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/raven.h b/include/asm-ppc/raven.h
deleted file mode 100644
index 66f52cc0a03..00000000000
--- a/include/asm-ppc/raven.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-ppc/raven.h -- Raven MPIC chip.
- *
- * Copyright (C) 1998 Johnnie Peters
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifdef __KERNEL__
-#ifndef _ASMPPC_RAVEN_H
-#define _ASMPPC_RAVEN_H
-
-#define MVME2600_INT_SIO 0
-#define MVME2600_INT_FALCN_ECC_ERR 1
-#define MVME2600_INT_PCI_ETHERNET 2
-#define MVME2600_INT_PCI_SCSI 3
-#define MVME2600_INT_PCI_GRAPHICS 4
-#define MVME2600_INT_PCI_VME0 5
-#define MVME2600_INT_PCI_VME1 6
-#define MVME2600_INT_PCI_VME2 7
-#define MVME2600_INT_PCI_VME3 8
-#define MVME2600_INT_PCI_INTA 9
-#define MVME2600_INT_PCI_INTB 10
-#define MVME2600_INT_PCI_INTC 11
-#define MVME2600_INT_PCI_INTD 12
-#define MVME2600_INT_LM_SIG0 13
-#define MVME2600_INT_LM_SIG1 14
-
-extern struct hw_interrupt_type raven_pic;
-
-extern int raven_init(void);
-#endif /* _ASMPPC_RAVEN_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
deleted file mode 100644
index 91e96af88bd..00000000000
--- a/include/asm-ppc/reg_booke.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Contains register definitions common to the Book E PowerPC
- * specification. Notice that while the IBM-40x series of CPUs
- * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well. Unfortunatly,
- * they sometimes used different locations than true Book E CPUs did.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_REG_BOOKE_H__
-#define __ASM_PPC_REG_BOOKE_H__
-
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn) ({unsigned int rval; \
- asm volatile("mfpmr %0," __stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
-#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
-#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
-#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
-#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
-#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
-#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
-
-#define PMLCA_FC 0x80000000 /* Freeze Counter */
-#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
-#define PMLCA_FCU 0x20000000 /* Freeze in User */
-#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
-#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
-#define PMLCA_CE 0x04000000 /* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
-#define PMLCA_EVENT_SHIFT 16
-
-#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
-#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
-#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
-#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT 8
-
-#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT 0
-
-#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
-
-#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
-#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
-#define PMGC0_FCECE 0x20000000 /* Freeze countes on
- Enabled Condition or
- Event */
-
-#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
-#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
-#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
-#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
-#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
-#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
-#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
-#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
-#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
-
-
-/* Machine State Register (MSR) Fields */
-#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
-#define MSR_SPE (1<<25) /* Enable SPE */
-#define MSR_DWE (1<<10) /* Debug Wait Enable */
-#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
-#define MSR_IS MSR_IR /* Instruction Space */
-#define MSR_DS MSR_DR /* Data Space */
-#define MSR_PMM (1<<2) /* Performance monitor mark bit */
-
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
-#endif
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
-#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
-#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
-#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
-#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
-#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
-#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
-#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
-#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
-#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
-#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
-#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
-#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
-#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
-#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
-#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
-#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
-#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
-#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */
-#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */
-#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */
-#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
-#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
-#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
-#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
-#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
-#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
-#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
-#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
-#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
-#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
-#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
-#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
-#define SPRN_MCSR 0x23C /* Machine Check Status Register */
-#define SPRN_MCAR 0x23D /* Machine Check Address Register */
-#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */
-#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
-#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
-#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
-#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
-#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
-#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
-#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
-#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
-#define SPRN_MAS7 0x3b0 /* MMU Assist Register 7 */
-#define SPRN_PID1 0x279 /* Process ID Register 1 */
-#define SPRN_PID2 0x27A /* Process ID Register 2 */
-#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
-#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
-#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
-#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
-#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define SPRN_SLER 0x3BB /* Little-endian real mode */
-#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
-#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
-#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define SPRN_SVR 0x3FF /* System Version Register */
-
-/*
- * SPRs which have conflicting definitions on true Book E versus classic,
- * or IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define SPRN_PID 0x030 /* Process ID */
-#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
-#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
-#define SPRN_DEAR 0x03D /* Data Error Address Register */
-#define SPRN_ESR 0x03E /* Exception Syndrome Register */
-#define SPRN_PIR 0x11E /* Processor Identification Register */
-#define SPRN_DBSR 0x130 /* Debug Status Register */
-#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */
-#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */
-#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */
-#define SPRN_DAC1 0x13C /* Data Address Compare 1 */
-#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
-#define SPRN_TSR 0x150 /* Timer Status Register */
-#define SPRN_TCR 0x154 /* Timer Control Register */
-#endif /* Book E */
-#ifdef CONFIG_40x
-#define SPRN_PID 0x3B1 /* Process ID */
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
-#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
-#endif
-
-/* Bit definitions for CCR1. */
-#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
-#define CCR1_TCS 0x00000080 /* Timer Clock Select */
-
-/* Bit definitions for the MCSR. */
-#ifdef CONFIG_4xx
-#define MCSR_MCS 0x80000000 /* Machine Check Summary */
-#define MCSR_IB 0x40000000 /* Instruction PLB Error */
-#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
-#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
-#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
-#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
-#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
-#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
-#endif
-
-/* Bit definitions for the DBSR. */
-/*
- * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define DBSR_IC 0x08000000 /* Instruction Completion */
-#define DBSR_BT 0x04000000 /* Branch Taken */
-#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
-#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
-#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
-#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */
-#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */
-#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */
-#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
-#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
-#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
-#endif
-#ifdef CONFIG_40x
-#define DBSR_IC 0x80000000 /* Instruction Completion */
-#define DBSR_BT 0x40000000 /* Branch taken */
-#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
-#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
-#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
-#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */
-#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */
-#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */
-#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */
-#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */
-#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */
-#endif
-
-/* Bit definitions related to the ESR. */
-#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_FP 0x01000000 /* Floating Point Operation */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define ESR_ST 0x00800000 /* Store Operation */
-#define ESR_DLK 0x00200000 /* Data Cache Locking */
-#define ESR_ILK 0x00100000 /* Instr. Cache Locking */
-#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */
-#define ESR_BO 0x00020000 /* Byte Ordering */
-
-/* Bit definitions related to the DBCR0. */
-#define DBCR0_EDM 0x80000000 /* External Debug Mode */
-#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
-#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
-#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
-#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
-#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
-#define DBCR0_RST_NONE 0x00000000 /* No Reset */
-#define DBCR0_IC 0x08000000 /* Instruction Completion */
-#define DBCR0_BT 0x04000000 /* Branch Taken */
-#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
-#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
-#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
-#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
-#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
-#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
-#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
-#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
-#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
-#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
-#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
-
-/* Bit definitions related to the TCR. */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define TCR_WP_MASK TCR_WP(3)
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define TCR_WRC_MASK TCR_WRC(3)
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define TCR_FP_MASK TCR_FP(3)
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-
-/* Bit definitions for the TSR. */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
-
-/* Bit definitions for the DCCR. */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-
-/* Bit definitions for DCWR. */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-
-/* Bit definitions for ICCR. */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-
-/* Bit definitions for L1CSR0. */
-#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */
-#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
-#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */
-#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
-
-/* Bit definitions for L1CSR1. */
-#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */
-#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
-#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
-
-/* Bit definitions for SGR. */
-#define SGR_NORMAL 0 /* Speculative fetching allowed. */
-#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
-
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
-#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
-#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
-#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
-#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
-#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
-#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
-#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
-#define SPEFSCR_OV 0x00004000 /* Integer overflow */
-#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
-#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
-#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
-#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
-#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
-#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
-#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
-
-/*
- * The IBM-403 is an even more odd special case, as it is much
- * older than the IBM-405 series. We put these down here incase someone
- * wishes to support these machines again.
- */
-#ifdef CONFIG_403GCX
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
-#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
-#define SPRN_TBHI 0x3DC /* Time Base High */
-#define SPRN_TBLO 0x3DD /* Time Base Low */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-
-
-/* Bit definitions for the DBCR. */
-#define DBCR_EDM DBCR0_EDM
-#define DBCR_IDM DBCR0_IDM
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
-#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
-#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
-#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#endif /* 403GCX */
-#endif /* __ASM_PPC_REG_BOOKE_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/residual.h b/include/asm-ppc/residual.h
deleted file mode 100644
index 934810d2566..00000000000
--- a/include/asm-ppc/residual.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/* 7/18/95 */
-/*----------------------------------------------------------------------------*/
-/* Residual Data header definitions and prototypes */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for RESIDUAL on PowerPC Reference Platform */
-/* residual.h - Residual data structure passed in r3. */
-/* Load point passed in r4 to boot image. */
-/* For enum's: if given in hex then they are bit significant, */
-/* i.e. only one bit is on for each enum */
-/* Reserved fields must be filled with zeros. */
-
-#ifdef __KERNEL__
-#ifndef _RESIDUAL_
-#define _RESIDUAL_
-
-#ifndef __ASSEMBLY__
-
-#define MAX_CPUS 32 /* These should be set to the maximum */
-#define MAX_MEMS 64 /* number possible for this system. */
-#define MAX_DEVICES 256 /* Changing these will change the */
-#define AVE_PNP_SIZE 32 /* structure, hence the version of */
-#define MAX_MEM_SEGS 64 /* this header file. */
-
-/*----------------------------------------------------------------------------*/
-/* Public structures... */
-/*----------------------------------------------------------------------------*/
-
-#include <asm/pnp.h>
-
-typedef enum _L1CACHE_TYPE {
- NoneCAC = 0,
- SplitCAC = 1,
- CombinedCAC = 2
- } L1CACHE_TYPE;
-
-typedef enum _TLB_TYPE {
- NoneTLB = 0,
- SplitTLB = 1,
- CombinedTLB = 2
- } TLB_TYPE;
-
-typedef enum _FIRMWARE_SUPPORT {
- Conventional = 0x01,
- OpenFirmware = 0x02,
- Diagnostics = 0x04,
- LowDebug = 0x08,
- Multiboot = 0x10,
- LowClient = 0x20,
- Hex41 = 0x40,
- FAT = 0x80,
- ISO9660 = 0x0100,
- SCSI_InitiatorID_Override = 0x0200,
- Tape_Boot = 0x0400,
- FW_Boot_Path = 0x0800
- } FIRMWARE_SUPPORT;
-
-typedef enum _FIRMWARE_SUPPLIERS {
- IBMFirmware = 0x00,
- MotoFirmware = 0x01, /* 7/18/95 */
- FirmWorks = 0x02, /* 10/5/95 */
- Bull = 0x03, /* 04/03/96 */
- } FIRMWARE_SUPPLIERS;
-
-typedef enum _ENDIAN_SWITCH_METHODS {
- UsePort92 = 0x01,
- UsePCIConfigA8 = 0x02,
- UseFF001030 = 0x03,
- } ENDIAN_SWITCH_METHODS;
-
-typedef enum _SPREAD_IO_METHODS {
- UsePort850 = 0x00,
-/*UsePCIConfigA8 = 0x02,*/
- } SPREAD_IO_METHODS;
-
-typedef struct _VPD {
-
- /* Box dependent stuff */
- unsigned char PrintableModel[32]; /* Null terminated string.
- Must be of the form:
- vvv,<20h>,<model designation>,<0x0>
- where vvv is the vendor ID
- e.g. IBM PPS MODEL 6015<0x0> */
- unsigned char Serial[16]; /* 12/94:
- Serial Number; must be of the form:
- vvv<serial number> where vvv is the
- vendor ID.
- e.g. IBM60151234567<20h><20h> */
- unsigned char Reserved[48];
- unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */
- unsigned long FirmwareSupports; /* See FirmwareSupport enum */
- unsigned long NvramSize; /* Size of nvram in bytes */
- unsigned long NumSIMMSlots;
- unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */
- unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */
- unsigned long SmpIar;
- unsigned long RAMErrLogOffset; /* Heap offset to error log */
- unsigned long Reserved5;
- unsigned long Reserved6;
- unsigned long ProcessorHz; /* Processor clock frequency in Hertz */
- unsigned long ProcessorBusHz; /* Processor bus clock frequency */
- unsigned long Reserved7;
- unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */
- unsigned long WordWidth; /* Word width in bits */
- unsigned long PageSize; /* Page size in bytes */
- unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache
- for which coherency is maintained;
- normally <= CacheLineSize. */
- unsigned long GranuleSize; /* Unit of lock allocation to avoid */
- /* false sharing of locks. */
-
- /* L1 Cache variables */
- unsigned long CacheSize; /* L1 Cache size in KB. This is the */
- /* total size of the L1, whether */
- /* combined or split */
- unsigned long CacheAttrib; /* L1CACHE_TYPE */
- unsigned long CacheAssoc; /* L1 Cache associativity. Use this
- for combined cache. If split, put
- zeros here. */
- unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use
- for combined cache. If split, put
- zeros here. */
- /* For split L1 Cache: (= combined if combined cache) */
- unsigned long I_CacheSize;
- unsigned long I_CacheAssoc;
- unsigned long I_CacheLineSize;
- unsigned long D_CacheSize;
- unsigned long D_CacheAssoc;
- unsigned long D_CacheLineSize;
-
- /* Translation Lookaside Buffer variables */
- unsigned long TLBSize; /* Total number of TLBs on the system */
- unsigned long TLBAttrib; /* Combined I+D or split TLB */
- unsigned long TLBAssoc; /* TLB Associativity. Use this for
- combined TLB. If split, put zeros
- here. */
- /* For split TLB: (= combined if combined TLB) */
- unsigned long I_TLBSize;
- unsigned long I_TLBAssoc;
- unsigned long D_TLBSize;
- unsigned long D_TLBAssoc;
-
- unsigned long ExtendedVPD; /* Offset to extended VPD area;
- null if unused */
- } VPD;
-
-typedef enum _DEVICE_FLAGS {
- Enabled = 0x4000, /* 1 - PCI device is enabled */
- Integrated = 0x2000,
- Failed = 0x1000, /* 1 - device failed POST code tests */
- Static = 0x0800, /* 0 - dynamically configurable
- 1 - static */
- Dock = 0x0400, /* 0 - not a docking station device
- 1 - is a docking station device */
- Boot = 0x0200, /* 0 - device cannot be used for BOOT
- 1 - can be a BOOT device */
- Configurable = 0x0100, /* 1 - device is configurable */
- Disableable = 0x80, /* 1 - device can be disabled */
- PowerManaged = 0x40, /* 0 - not managed; 1 - managed */
- ReadOnly = 0x20, /* 1 - device is read only */
- Removable = 0x10, /* 1 - device is removable */
- ConsoleIn = 0x08,
- ConsoleOut = 0x04,
- Input = 0x02,
- Output = 0x01
- } DEVICE_FLAGS;
-
-typedef enum _BUS_ID {
- ISADEVICE = 0x01,
- EISADEVICE = 0x02,
- PCIDEVICE = 0x04,
- PCMCIADEVICE = 0x08,
- PNPISADEVICE = 0x10,
- MCADEVICE = 0x20,
- MXDEVICE = 0x40, /* Devices on mezzanine bus */
- PROCESSORDEVICE = 0x80, /* Devices on processor bus */
- VMEDEVICE = 0x100,
- } BUS_ID;
-
-typedef struct _DEVICE_ID {
- unsigned long BusId; /* See BUS_ID enum above */
- unsigned long DevId; /* Big Endian format */
- unsigned long SerialNum; /* For multiple usage of a single
- DevId */
- unsigned long Flags; /* See DEVICE_FLAGS enum above */
- unsigned char BaseType; /* See pnp.h for bit definitions */
- unsigned char SubType; /* See pnp.h for bit definitions */
- unsigned char Interface; /* See pnp.h for bit definitions */
- unsigned char Spare;
- } DEVICE_ID;
-
-typedef union _BUS_ACCESS {
- struct _PnPAccess{
- unsigned char CSN;
- unsigned char LogicalDevNumber;
- unsigned short ReadDataPort;
- } PnPAccess;
- struct _ISAAccess{
- unsigned char SlotNumber; /* ISA Slot Number generally not
- available; 0 if unknown */
- unsigned char LogicalDevNumber;
- unsigned short ISAReserved;
- } ISAAccess;
- struct _MCAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short MCAReserved;
- } MCAAccess;
- struct _PCMCIAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short PCMCIAReserved;
- } PCMCIAAccess;
- struct _EISAAccess{
- unsigned char SlotNumber;
- unsigned char FunctionNumber;
- unsigned short EISAReserved;
- } EISAAccess;
- struct _PCIAccess{
- unsigned char BusNumber;
- unsigned char DevFuncNumber;
- unsigned short PCIReserved;
- } PCIAccess;
- struct _ProcBusAccess{
- unsigned char BusNumber;
- unsigned char BUID;
- unsigned short ProcBusReserved;
- } ProcBusAccess;
- } BUS_ACCESS;
-
-/* Per logical device information */
-typedef struct _PPC_DEVICE {
- DEVICE_ID DeviceId;
- BUS_ACCESS BusAccess;
-
- /* The following three are offsets into the DevicePnPHeap */
- /* All are in PnP compressed format */
- unsigned long AllocatedOffset; /* Allocated resource description */
- unsigned long PossibleOffset; /* Possible resource description */
- unsigned long CompatibleOffset; /* Compatible device identifiers */
- } PPC_DEVICE;
-
-typedef enum _CPU_STATE {
- CPU_GOOD = 0, /* CPU is present, and active */
- CPU_GOOD_FW = 1, /* CPU is present, and in firmware */
- CPU_OFF = 2, /* CPU is present, but inactive */
- CPU_FAILED = 3, /* CPU is present, but failed POST */
- CPU_NOT_PRESENT = 255 /* CPU not present */
- } CPU_STATE;
-
-typedef struct _PPC_CPU {
- unsigned long CpuType; /* Result of mfspr from Processor
- Version Register (PVR).
- PVR(0-15) = Version (e.g. 601)
- PVR(16-31 = EC Level */
- unsigned char CpuNumber; /* CPU Number for this processor */
- unsigned char CpuState; /* CPU State, see CPU_STATE enum */
- unsigned short Reserved;
- } PPC_CPU;
-
-typedef struct _PPC_MEM {
- unsigned long SIMMSize; /* 0 - absent or bad
- 8M, 32M (in MB) */
- } PPC_MEM;
-
-typedef enum _MEM_USAGE {
- Other = 0x8000,
- ResumeBlock = 0x4000, /* for use by power management */
- SystemROM = 0x2000, /* Flash memory (populated) */
- UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */
- IOMemory = 0x0800,
- SystemIO = 0x0400,
- SystemRegs = 0x0200,
- PCIAddr = 0x0100,
- PCIConfig = 0x80,
- ISAAddr = 0x40,
- Unpopulated = 0x20, /* Unpopulated part of System Memory */
- Free = 0x10, /* Free part of System Memory */
- BootImage = 0x08, /* BootImage part of System Memory */
- FirmwareCode = 0x04, /* FirmwareCode part of System Memory */
- FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */
- FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/
- } MEM_USAGE;
-
-typedef struct _MEM_MAP {
- unsigned long Usage; /* See MEM_USAGE above */
- unsigned long BasePage; /* Page number measured in 4KB pages */
- unsigned long PageCount; /* Page count measured in 4KB pages */
- } MEM_MAP;
-
-typedef struct _RESIDUAL {
- unsigned long ResidualLength; /* Length of Residual */
- unsigned char Version; /* of this data structure */
- unsigned char Revision; /* of this data structure */
- unsigned short EC; /* of this data structure */
- /* VPD */
- VPD VitalProductData;
- /* CPU */
- unsigned short MaxNumCpus; /* Max CPUs in this system */
- unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */
- /* that there are unpopulated or */
- /* otherwise unusable cpu locations */
- PPC_CPU Cpus[MAX_CPUS];
- /* Memory */
- unsigned long TotalMemory; /* Total amount of memory installed */
- unsigned long GoodMemory; /* Total amount of good memory */
- unsigned long ActualNumMemSegs;
- MEM_MAP Segs[MAX_MEM_SEGS];
- unsigned long ActualNumMemories;
- PPC_MEM Memories[MAX_MEMS];
- /* Devices */
- unsigned long ActualNumDevices;
- PPC_DEVICE Devices[MAX_DEVICES];
- unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
- } RESIDUAL;
-
-
-/*
- * Forward declaration - we can't include <linux/pci.h> because it
- * breaks the boot loader
- */
-struct pci_dev;
-
-extern RESIDUAL *res;
-extern void print_residual_device_info(void);
-extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
- unsigned char * DevID, int BaseType,
- int SubType, int Interface, int n);
-extern int residual_pcidev_irq(struct pci_dev *dev);
-extern void residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern unsigned int residual_isapic_addr(void);
-extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
- int n);
-extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-
-#ifdef CONFIG_PREP_RESIDUAL
-#define have_residual_data (res && res->ResidualLength)
-#else
-#define have_residual_data 0
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _RESIDUAL_ */
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h
deleted file mode 100644
index 6025b46d0a2..00000000000
--- a/include/asm-ppc/rtc.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * include/asm-ppc/rtc.h
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on:
- * include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- *
- * And the old drivers/macintosh/rtc.c which was heavily based on:
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * With additional work by Paul Mackerras and Franz Sirl.
- */
-
-#ifndef __ASM_RTC_H__
-#define __ASM_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40 /* periodic interrupt enable */
-#define RTC_AIE 0x20 /* alarm interrupt enable */
-#define RTC_UIE 0x10 /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100 /* battery bad */
-#define RTC_SQWE 0x08 /* enable square-wave output */
-#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
-#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
- if (ppc_md.get_rtc_time) {
- unsigned long nowtime;
-
- nowtime = (ppc_md.get_rtc_time)();
-
- to_tm(nowtime, time);
-
- time->tm_year -= 1900;
- time->tm_mon -= 1; /* Make sure userland has a 0-based month */
- }
- return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
-{
- if (ppc_md.get_rtc_time) {
- unsigned long nowtime;
-
- nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
- time->tm_mday, time->tm_hour, time->tm_min,
- time->tm_sec);
-
- (ppc_md.set_rtc_time)(nowtime);
-
- return 0;
- } else
- return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
deleted file mode 100644
index d35ed10315b..00000000000
--- a/include/asm-ppc/serial.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-ppc/serial.h
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SERIAL_H__
-#define __ASM_SERIAL_H__
-
-
-#if defined(CONFIG_EV64260)
-#include <platforms/ev64260.h>
-#elif defined(CONFIG_CHESTNUT)
-#include <platforms/chestnut.h>
-#elif defined(CONFIG_POWERPMC250)
-#include <platforms/powerpmc250.h>
-#elif defined(CONFIG_LOPEC)
-#include <platforms/lopec.h>
-#elif defined(CONFIG_MVME5100)
-#include <platforms/mvme5100.h>
-#elif defined(CONFIG_PAL4)
-#include <platforms/pal4_serial.h>
-#elif defined(CONFIG_PRPMC750)
-#include <platforms/prpmc750.h>
-#elif defined(CONFIG_PRPMC800)
-#include <platforms/prpmc800.h>
-#elif defined(CONFIG_SANDPOINT)
-#include <platforms/sandpoint.h>
-#elif defined(CONFIG_SPRUCE)
-#include <platforms/spruce.h>
-#elif defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_RADSTONE_PPC7D)
-#include <platforms/radstone_ppc7d.h>
-#else
-
-/*
- * XXX Assume it has PC-style ISA serial ports - true for PReP at least.
- */
-#include <asm/pc_serial.h>
-
-#endif /* !CONFIG_GEMINI and others */
-#endif /* __ASM_SERIAL_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h
deleted file mode 100644
index e75791ea33a..00000000000
--- a/include/asm-ppc/smp.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* smp.h: PPC specific SMP stuff.
- *
- * Original was a copy of sparc smp.h. Now heavily modified
- * for PPC.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
- */
-#ifdef __KERNEL__
-#ifndef _PPC_SMP_H
-#define _PPC_SMP_H
-
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-
-#ifdef CONFIG_SMP
-
-#ifndef __ASSEMBLY__
-
-struct cpuinfo_PPC {
- unsigned long loops_per_jiffy;
- unsigned long pvr;
- unsigned long *pgd_cache;
- unsigned long *pte_cache;
- unsigned long pgtable_cache_sz;
-};
-
-extern struct cpuinfo_PPC cpu_data[];
-extern cpumask_t cpu_online_map;
-extern cpumask_t cpu_possible_map;
-extern unsigned long smp_proc_in_lock[];
-extern volatile unsigned long cpu_callin_map[];
-extern int smp_tb_synchronized;
-extern struct smp_ops_t *smp_ops;
-
-extern void smp_send_tlb_invalidate(int);
-extern void smp_send_xmon_break(int cpu);
-struct pt_regs;
-extern void smp_message_recv(int);
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void) __attribute__((noreturn));
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-extern int __cpu_up(unsigned int cpu);
-
-extern int smp_hw_index[];
-#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
- (smp_hw_index[(cpu)] = (phys))
-
-#endif /* __ASSEMBLY__ */
-
-#else /* !(CONFIG_SMP) */
-
-static inline void cpu_die(void) { }
-#define get_hard_smp_processor_id(cpu) 0
-#define set_hard_smp_processor_id(cpu, phys)
-#define hard_smp_processor_id() 0
-
-#endif /* !(CONFIG_SMP) */
-
-#ifndef __ASSEMBLY__
-extern int boot_cpuid;
-extern int boot_cpuid_phys;
-#endif
-
-#endif /* !(_PPC_SMP_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h
deleted file mode 100644
index fccaf5531e5..00000000000
--- a/include/asm-ppc/spinlock.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <asm/system.h>
-
-/*
- * Simple spin lock operations.
- *
- * (the type definitions are in asm/raw_spinlock_types.h)
- */
-
-#define __raw_spin_is_locked(x) ((x)->slock != 0)
-#define __raw_spin_unlock_wait(lock) \
- do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
- unsigned long tmp;
-
- __asm__ __volatile__(
- "b 1f # __raw_spin_lock\n\
-2: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne+ 2b\n\
-1: lwarx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne- 2b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&lock->slock), "r"(1)
- : "cr0", "memory");
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- __asm__ __volatile__("eieio # __raw_spin_unlock": : :"memory");
- lock->slock = 0;
-}
-
-#define __raw_spin_trylock(l) (!test_and_set_bit(0,(volatile unsigned long *)(&(l)->slock)))
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-#define __raw_read_can_lock(rw) ((rw)->lock >= 0)
-#define __raw_write_can_lock(rw) (!(rw)->lock)
-
-static __inline__ int __raw_read_trylock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
-"2: lwarx %0,0,%1 # read_trylock\n\
- addic. %0,%0,1\n\
- ble- 1f\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 2b\n\
- isync\n\
-1:"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-
- return tmp > 0;
-}
-
-static __inline__ void __raw_read_lock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "b 2f # read_lock\n\
-1: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- blt+ 1b\n\
-2: lwarx %0,0,%1\n\
- addic. %0,%0,1\n\
- ble- 1b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-}
-
-static __inline__ void __raw_read_unlock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "eieio # read_unlock\n\
-1: lwarx %0,0,%1\n\
- addic %0,%0,-1\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 1b"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-}
-
-static __inline__ int __raw_write_trylock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
-"2: lwarx %0,0,%1 # write_trylock\n\
- cmpwi 0,%0,0\n\
- bne- 1f\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync\n\
-1:"
- : "=&r"(tmp)
- : "r"(&rw->lock), "r"(-1)
- : "cr0", "memory");
-
- return tmp == 0;
-}
-
-static __inline__ void __raw_write_lock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "b 2f # write_lock\n\
-1: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne+ 1b\n\
-2: lwarx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne- 1b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&rw->lock), "r"(-1)
- : "cr0", "memory");
-}
-
-static __inline__ void __raw_write_unlock(raw_rwlock_t *rw)
-{
- __asm__ __volatile__("eieio # write_unlock": : :"memory");
- rw->lock = 0;
-}
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-ppc/suspend.h b/include/asm-ppc/suspend.h
deleted file mode 100644
index 3df9f32bd83..00000000000
--- a/include/asm-ppc/suspend.h
+++ /dev/null
@@ -1,12 +0,0 @@
-static inline int arch_prepare_suspend(void)
-{
- return 0;
-}
-
-static inline void save_processor_state(void)
-{
-}
-
-static inline void restore_processor_state(void)
-{
-}
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
deleted file mode 100644
index 70ebd333c55..00000000000
--- a/include/asm-ppc/system.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef __PPC_SYSTEM_H
-#define __PPC_SYSTEM_H
-
-#include <linux/kernel.h>
-
-#include <asm/hw_irq.h>
-
-/*
- * Memory barrier.
- * The sync instruction guarantees that all memory accesses initiated
- * by this processor have been performed (with respect to all other
- * mechanisms that access memory). The eieio instruction is a barrier
- * providing an ordering (separately) for (a) cacheable stores and (b)
- * loads and stores to non-cacheable memory (e.g. I/O devices).
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- * across this point (nop on PPC).
- *
- * We can use the eieio instruction for wmb, but since it doesn't
- * give any ordering guarantees about loads, we have to use the
- * stronger but slower sync instruction for mb and rmb.
- */
-#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
-#define wmb() __asm__ __volatile__ ("eieio" : : : "memory")
-#define read_barrier_depends() do { } while(0)
-
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-
-#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() __asm__ __volatile__ ("eieio" : : : "memory")
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif /* CONFIG_SMP */
-
-#ifdef __KERNEL__
-struct task_struct;
-struct pt_regs;
-
-extern void print_backtrace(unsigned long *);
-extern void show_regs(struct pt_regs * regs);
-extern void flush_instruction_cache(void);
-extern void hard_reset_now(void);
-extern void poweroff_now(void);
-extern int set_dabr(unsigned long dabr);
-#ifdef CONFIG_6xx
-extern long _get_L2CR(void);
-extern long _get_L3CR(void);
-extern void _set_L2CR(unsigned long);
-extern void _set_L3CR(unsigned long);
-#else
-#define _get_L2CR() 0L
-#define _get_L3CR() 0L
-#define _set_L2CR(val) do { } while(0)
-#define _set_L3CR(val) do { } while(0)
-#endif
-extern void via_cuda_init(void);
-extern void pmac_nvram_init(void);
-extern void chrp_nvram_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-extern void giveup_fpu(struct task_struct *);
-extern void disable_kernel_fp(void);
-extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
-extern void enable_kernel_altivec(void);
-extern void giveup_altivec(struct task_struct *);
-extern void load_up_altivec(struct task_struct *);
-extern int emulate_altivec(struct pt_regs *);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
-extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
-extern void cvt_df(double *from, float *to, struct thread_struct *thread);
-
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ALTIVEC
-extern void flush_altivec_to_thread(struct task_struct *);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_SPE
-extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-extern void cacheable_memzero(void *p, unsigned int nb);
-extern void *cacheable_memcpy(void *, const void *, unsigned int);
-extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
-extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
-extern void _exception(int, struct pt_regs *, int, unsigned long);
-void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-extern struct task_struct *__switch_to(struct task_struct *,
- struct task_struct *);
-#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next)))
-
-struct thread_struct;
-extern struct task_struct *_switch(struct thread_struct *prev,
- struct thread_struct *next);
-
-extern unsigned int rtas_data;
-
-static __inline__ unsigned long
-xchg_u32(volatile void *p, unsigned long val)
-{
- unsigned long prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n"
- PPC405_ERR77(0,%2)
-" stwcx. %3,0,%2 \n\
- bne- 1b"
- : "=&r" (prev), "=m" (*(volatile unsigned long *)p)
- : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
- : "cc", "memory");
-
- return prev;
-}
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
- switch (size) {
- case 4:
- return (unsigned long) xchg_u32(ptr, x);
-#if 0 /* xchg_u64 doesn't exist on 32-bit PPC */
- case 8:
- return (unsigned long) xchg_u64(ptr, x);
-#endif /* 0 */
- }
- __xchg_called_with_bad_pointer();
- return x;
-
-
-}
-
-static inline void * xchg_ptr(void * m, void * val)
-{
- return (void *) xchg_u32(m, (unsigned long) val);
-}
-
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static __inline__ unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
-{
- unsigned int prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n\
- cmpw 0,%0,%3 \n\
- bne 2f \n"
- PPC405_ERR77(0,%2)
-" stwcx. %4,0,%2 \n\
- bne- 1b\n"
-#ifdef CONFIG_SMP
-" sync\n"
-#endif /* CONFIG_SMP */
-"2:"
- : "=&r" (prev), "=m" (*p)
- : "r" (p), "r" (old), "r" (new), "m" (*p)
- : "cc", "memory");
-
- return prev;
-}
-
-static inline unsigned long
-__cmpxchg_u32_local(volatile unsigned int *p, unsigned int old,
- unsigned int new)
-{
- unsigned int prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n\
- cmpw 0,%0,%3 \n\
- bne 2f \n"
- PPC405_ERR77(0,%2)
-" stwcx. %4,0,%2 \n\
- bne- 1b\n"
-"2:"
- : "=&r" (prev), "=m" (*p)
- : "r" (p), "r" (old), "r" (new), "m" (*p)
- : "cc", "memory");
-
- return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
- if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __inline__ unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
- unsigned int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
-#if 0 /* we don't have __cmpxchg_u64 on 32-bit PPC */
- case 8:
- return __cmpxchg_u64(ptr, old, new);
-#endif /* 0 */
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define cmpxchg(ptr, o, n) \
- ({ \
- __typeof__(*(ptr)) _o_ = (o); \
- __typeof__(*(ptr)) _n_ = (n); \
- (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
- (unsigned long)_n_, sizeof(*(ptr))); \
- })
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32_local(ptr, old, new);
- default:
- return __cmpxchg_local_generic(ptr, old, new, size);
- }
-
- return old;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_SYSTEM_H */
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
deleted file mode 100644
index 81dbcd43a50..00000000000
--- a/include/asm-ppc/time.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Common time prototypes and such for all ppc machines.
- *
- * Written by Cort Dougan (cort@fsmlabs.com) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_TIME_H__
-#define __ASM_TIME_H__
-
-#include <linux/types.h>
-#include <linux/rtc.h>
-#include <linux/threads.h>
-
-#include <asm/reg.h>
-
-/* time.c */
-extern unsigned tb_ticks_per_jiffy;
-extern unsigned tb_to_us;
-extern unsigned tb_last_stamp;
-extern unsigned long disarm_decr[NR_CPUS];
-
-extern void to_tm(int tim, struct rtc_time * tm);
-extern time_t last_rtc_update;
-
-extern void set_dec_cpu6(unsigned int val);
-
-int via_calibrate_decr(void);
-
-/* Accessor functions for the decrementer register.
- * The 4xx doesn't even have a decrementer. I tried to use the
- * generic timer interrupt code, which seems OK, with the 4xx PIT
- * in auto-reload mode. The problem is PIT stops counting when it
- * hits zero. If it would wrap, we could use it just like a decrementer.
- */
-static __inline__ unsigned int get_dec(void)
-{
-#if defined(CONFIG_40x)
- return (mfspr(SPRN_PIT));
-#else
- return (mfspr(SPRN_DEC));
-#endif
-}
-
-static __inline__ void set_dec(unsigned int val)
-{
-#if defined(CONFIG_40x)
- return; /* Have to let it auto-reload */
-#elif defined(CONFIG_8xx_CPU6)
- set_dec_cpu6(val);
-#else
- mtspr(SPRN_DEC, val);
-#endif
-}
-
-/* Accessor functions for the timebase (RTC on 601) registers. */
-/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
-#ifdef CONFIG_6xx
-extern __inline__ int __pure __USE_RTC(void) {
- return (mfspr(SPRN_PVR)>>16) == 1;
-}
-#else
-#define __USE_RTC() 0
-#endif
-
-extern __inline__ unsigned long get_tbl(void) {
- unsigned long tbl;
-#if defined(CONFIG_403GCX)
- asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
-#else
- asm volatile("mftb %0" : "=r" (tbl));
-#endif
- return tbl;
-}
-
-extern __inline__ unsigned long get_tbu(void) {
- unsigned long tbl;
-#if defined(CONFIG_403GCX)
- asm volatile("mfspr %0, 0x3dc" : "=r" (tbl));
-#else
- asm volatile("mftbu %0" : "=r" (tbl));
-#endif
- return tbl;
-}
-
-extern __inline__ void set_tb(unsigned int upper, unsigned int lower)
-{
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, upper);
- mtspr(SPRN_TBWL, lower);
-}
-
-extern __inline__ unsigned long get_rtcl(void) {
- unsigned long rtcl;
- asm volatile("mfrtcl %0" : "=r" (rtcl));
- return rtcl;
-}
-
-extern __inline__ unsigned long get_rtcu(void)
-{
- unsigned long rtcu;
- asm volatile("mfrtcu %0" : "=r" (rtcu));
- return rtcu;
-}
-
-extern __inline__ unsigned get_native_tbl(void) {
- if (__USE_RTC())
- return get_rtcl();
- else
- return get_tbl();
-}
-
-/* On machines with RTC, this function can only be used safely
- * after the timestamp and for 1 second. It is only used by gettimeofday
- * however so it should not matter.
- */
-extern __inline__ unsigned tb_ticks_since(unsigned tstamp) {
- if (__USE_RTC()) {
- int delta = get_rtcl() - tstamp;
- return delta<0 ? delta + 1000000000 : delta;
- } else {
- return get_tbl() - tstamp;
- }
-}
-
-#if 0
-extern __inline__ unsigned long get_bin_rtcl(void) {
- unsigned long rtcl, rtcu1, rtcu2;
- asm volatile("\
-1: mfrtcu %0\n\
- mfrtcl %1\n\
- mfrtcu %2\n\
- cmpw %0,%2\n\
- bne- 1b\n"
- : "=r" (rtcu1), "=r" (rtcl), "=r" (rtcu2)
- : : "cr0");
- return rtcu2*1000000000+rtcl;
-}
-
-extern __inline__ unsigned binary_tbl(void) {
- if (__USE_RTC())
- return get_bin_rtcl();
- else
- return get_tbl();
-}
-#endif
-
-/* Use mulhwu to scale processor timebase to timeval */
-/* Specifically, this computes (x * y) / 2^32. -- paulus */
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-unsigned mulhwu_scale_factor(unsigned, unsigned);
-
-#define account_process_vtime(tsk) do { } while (0)
-#define calculate_steal_time() do { } while (0)
-#define snapshot_timebases() do { } while (0)
-
-#endif /* __ASM_TIME_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/todc.h b/include/asm-ppc/todc.h
deleted file mode 100644
index 937c7dbe6e5..00000000000
--- a/include/asm-ppc/todc.h
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * Definitions for the M48Txx and mc146818 series of Time of day/Real Time
- * Clock chips.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips.
- * Purpose is to make one generic file that handles all of these chips instead
- * of every platform implementing the same code over & over again.
- */
-
-#ifndef __PPC_KERNEL_TODC_H
-#define __PPC_KERNEL_TODC_H
-
-typedef struct {
- uint rtc_type; /* your particular chip */
-
- /*
- * Following are the addresses of the AS0, AS1, and DATA registers
- * of these chips. Note that these are board-specific.
- */
- unsigned int nvram_as0;
- unsigned int nvram_as1;
- unsigned int nvram_data;
-
- /*
- * Define bits to stop external set of regs from changing so
- * the chip can be read/written reliably.
- */
- unsigned char enable_read;
- unsigned char enable_write;
-
- /*
- * Following is the number of AS0 address bits. This is normally
- * 8 but some bad hardware routes address lines incorrectly.
- */
- int as0_bits;
-
- int nvram_size; /* Size of NVRAM on chip */
- int sw_flags; /* Software control flags */
-
- /* Following are the register offsets for the particular chip */
- int year;
- int month;
- int day_of_month;
- int day_of_week;
- int hours;
- int minutes;
- int seconds;
- int control_b;
- int control_a;
- int watchdog;
- int interrupts;
- int alarm_date;
- int alarm_hour;
- int alarm_minutes;
- int alarm_seconds;
- int century;
- int flags;
-
- /*
- * Some RTC chips have their NVRAM buried behind a addr/data pair of
- * regs on the first level/clock registers. The following fields
- * are the addresses for those addr/data regs.
- */
- int nvram_addr_reg;
- int nvram_data_reg;
-} todc_info_t;
-
-/*
- * Define the types of TODC/RTC variants that are supported in
- * arch/ppc/kernel/todc_time.c
- * Make a new one of these for any chip somehow differs from what's already
- * defined. That way, if you ever need to put in code to touch those
- * bits/registers in todc_time.c, you can put it inside an
- * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break
- * anyone else.
- */
-#define TODC_TYPE_MK48T35 1
-#define TODC_TYPE_MK48T37 2
-#define TODC_TYPE_MK48T59 3
-#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */
-#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */
-#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */
-#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */
-#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */
-#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */
-#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */
-#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */
-#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */
-#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */
-#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */
-
-/*
- * Bit to clear/set to enable reads/writes to the chip
- */
-#define TODC_MK48TXX_CNTL_A_R 0x40
-#define TODC_MK48TXX_CNTL_A_W 0x80
-#define TODC_MK48TXX_DAY_CB 0x80
-
-#define TODC_DS1501_CNTL_B_TE 0x80
-
-/*
- * Define flag bits used by todc routines.
- */
-#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001
-
-/*
- * Define the values for the various RTC's that should to into the todc_info
- * table.
- * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only
- * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set.
- */
-#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8
-#define TODC_TYPE_MK48T35_SW_FLAGS 0
-#define TODC_TYPE_MK48T35_YEAR 0x7fff
-#define TODC_TYPE_MK48T35_MONTH 0x7ffe
-#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */
-#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */
-#define TODC_TYPE_MK48T35_HOURS 0x7ffb
-#define TODC_TYPE_MK48T35_MINUTES 0x7ffa
-#define TODC_TYPE_MK48T35_SECONDS 0x7ff9
-#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9
-#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8
-#define TODC_TYPE_MK48T35_WATCHDOG 0x0000
-#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000
-#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000
-#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000
-#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000
-#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000
-#define TODC_TYPE_MK48T35_CENTURY 0x0000
-#define TODC_TYPE_MK48T35_FLAGS 0x0000
-#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0
-#define TODC_TYPE_MK48T37_SW_FLAGS 0
-#define TODC_TYPE_MK48T37_YEAR 0x7fff
-#define TODC_TYPE_MK48T37_MONTH 0x7ffe
-#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */
-#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */
-#define TODC_TYPE_MK48T37_HOURS 0x7ffb
-#define TODC_TYPE_MK48T37_MINUTES 0x7ffa
-#define TODC_TYPE_MK48T37_SECONDS 0x7ff9
-#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9
-#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8
-#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7
-#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6
-#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5
-#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4
-#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3
-#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2
-#define TODC_TYPE_MK48T37_CENTURY 0x7ff1
-#define TODC_TYPE_MK48T37_FLAGS 0x7ff0
-#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0
-#define TODC_TYPE_MK48T59_SW_FLAGS 0
-#define TODC_TYPE_MK48T59_YEAR 0x1fff
-#define TODC_TYPE_MK48T59_MONTH 0x1ffe
-#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_MK48T59_HOURS 0x1ffb
-#define TODC_TYPE_MK48T59_MINUTES 0x1ffa
-#define TODC_TYPE_MK48T59_SECONDS 0x1ff9
-#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9
-#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8
-#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff
-#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_MK48T59_CENTURY 0x1fff
-#define TODC_TYPE_MK48T59_FLAGS 0x1fff
-#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100
-#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
-#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06)
-#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05)
-#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04)
-#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03)
-#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02)
-#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01)
-#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00)
-#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
-#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
-#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b)
-#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a)
-#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09)
-#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08)
-#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07)
-#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10
-#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13
-
-#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0
-#define TODC_TYPE_DS1553_SW_FLAGS 0
-#define TODC_TYPE_DS1553_YEAR 0x1fff
-#define TODC_TYPE_DS1553_MONTH 0x1ffe
-#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1553_HOURS 0x1ffb
-#define TODC_TYPE_DS1553_MINUTES 0x1ffa
-#define TODC_TYPE_DS1553_SECONDS 0x1ff9
-#define TODC_TYPE_DS1553_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7
-#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6
-#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5
-#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4
-#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3
-#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2
-#define TODC_TYPE_DS1553_CENTURY 0x1ff8
-#define TODC_TYPE_DS1553_FLAGS 0x1ff0
-#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0
-#define TODC_TYPE_DS1557_SW_FLAGS 0
-#define TODC_TYPE_DS1557_YEAR 0x7ffff
-#define TODC_TYPE_DS1557_MONTH 0x7fffe
-#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */
-#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */
-#define TODC_TYPE_DS1557_HOURS 0x7fffb
-#define TODC_TYPE_DS1557_MINUTES 0x7fffa
-#define TODC_TYPE_DS1557_SECONDS 0x7fff9
-#define TODC_TYPE_DS1557_CNTL_B 0x7fff9
-#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7
-#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6
-#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5
-#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4
-#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3
-#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2
-#define TODC_TYPE_DS1557_CENTURY 0x7fff8
-#define TODC_TYPE_DS1557_FLAGS 0x7fff0
-#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8
-#define TODC_TYPE_DS1643_SW_FLAGS 0
-#define TODC_TYPE_DS1643_YEAR 0x1fff
-#define TODC_TYPE_DS1643_MONTH 0x1ffe
-#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1643_HOURS 0x1ffb
-#define TODC_TYPE_DS1643_MINUTES 0x1ffa
-#define TODC_TYPE_DS1643_SECONDS 0x1ff9
-#define TODC_TYPE_DS1643_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1643_WATCHDOG 0x1fff
-#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff
-#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff
-#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff
-#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_DS1643_CENTURY 0x1ff8
-#define TODC_TYPE_DS1643_FLAGS 0x1fff
-#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */
-#define TODC_TYPE_DS1693_SW_FLAGS 0
-#define TODC_TYPE_DS1693_YEAR 0x09
-#define TODC_TYPE_DS1693_MONTH 0x08
-#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_DS1693_HOURS 0x04
-#define TODC_TYPE_DS1693_MINUTES 0x02
-#define TODC_TYPE_DS1693_SECONDS 0x00
-#define TODC_TYPE_DS1693_CNTL_B 0x0b
-#define TODC_TYPE_DS1693_CNTL_A 0x0a
-#define TODC_TYPE_DS1693_WATCHDOG 0xff
-#define TODC_TYPE_DS1693_INTERRUPTS 0xff
-#define TODC_TYPE_DS1693_ALARM_DATE 0x49
-#define TODC_TYPE_DS1693_ALARM_HOUR 0x05
-#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03
-#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01
-#define TODC_TYPE_DS1693_CENTURY 0x48
-#define TODC_TYPE_DS1693_FLAGS 0xff
-#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8
-#define TODC_TYPE_DS1743_SW_FLAGS 0
-#define TODC_TYPE_DS1743_YEAR 0x1fff
-#define TODC_TYPE_DS1743_MONTH 0x1ffe
-#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1743_HOURS 0x1ffb
-#define TODC_TYPE_DS1743_MINUTES 0x1ffa
-#define TODC_TYPE_DS1743_SECONDS 0x1ff9
-#define TODC_TYPE_DS1743_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1743_WATCHDOG 0x1fff
-#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff
-#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff
-#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff
-#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_DS1743_CENTURY 0x1ff8
-#define TODC_TYPE_DS1743_FLAGS 0x1fff
-#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8
-#define TODC_TYPE_DS1746_SW_FLAGS 0
-#define TODC_TYPE_DS1746_YEAR 0x1ffff
-#define TODC_TYPE_DS1746_MONTH 0x1fffe
-#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */
-#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */
-#define TODC_TYPE_DS1746_HOURS 0x1fffb
-#define TODC_TYPE_DS1746_MINUTES 0x1fffa
-#define TODC_TYPE_DS1746_SECONDS 0x1fff9
-#define TODC_TYPE_DS1746_CNTL_B 0x1fff9
-#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1746_WATCHDOG 0x00000
-#define TODC_TYPE_DS1746_INTERRUPTS 0x00000
-#define TODC_TYPE_DS1746_ALARM_DATE 0x00000
-#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000
-#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000
-#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000
-#define TODC_TYPE_DS1746_CENTURY 0x00000
-#define TODC_TYPE_DS1746_FLAGS 0x00000
-#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8
-#define TODC_TYPE_DS1747_SW_FLAGS 0
-#define TODC_TYPE_DS1747_YEAR 0x7ffff
-#define TODC_TYPE_DS1747_MONTH 0x7fffe
-#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */
-#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */
-#define TODC_TYPE_DS1747_HOURS 0x7fffb
-#define TODC_TYPE_DS1747_MINUTES 0x7fffa
-#define TODC_TYPE_DS1747_SECONDS 0x7fff9
-#define TODC_TYPE_DS1747_CNTL_B 0x7fff9
-#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1747_WATCHDOG 0x00000
-#define TODC_TYPE_DS1747_INTERRUPTS 0x00000
-#define TODC_TYPE_DS1747_ALARM_DATE 0x00000
-#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000
-#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000
-#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000
-#define TODC_TYPE_DS1747_CENTURY 0x00000
-#define TODC_TYPE_DS1747_FLAGS 0x00000
-#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */
-#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
-#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00)
-#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01)
-#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02)
-#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03)
-#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04)
-#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05)
-#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06)
-#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07)
-#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08)
-#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09)
-#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A)
-#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B)
-#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C)
-#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D)
-#define TODC_TYPE_DS17285_WATCHDOG 0
-#define TODC_TYPE_DS17285_INTERRUPTS 0
-#define TODC_TYPE_DS17285_ALARM_DATE 0
-#define TODC_TYPE_DS17285_CENTURY 0
-#define TODC_TYPE_DS17285_FLAGS 0
-#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50
-#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53
-
-#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */
-#define TODC_TYPE_MC146818_SW_FLAGS 0
-#define TODC_TYPE_MC146818_YEAR 0x09
-#define TODC_TYPE_MC146818_MONTH 0x08
-#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_MC146818_HOURS 0x04
-#define TODC_TYPE_MC146818_MINUTES 0x02
-#define TODC_TYPE_MC146818_SECONDS 0x00
-#define TODC_TYPE_MC146818_CNTL_B 0x0a
-#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */
-#define TODC_TYPE_MC146818_WATCHDOG 0
-#define TODC_TYPE_MC146818_INTERRUPTS 0x0c
-#define TODC_TYPE_MC146818_ALARM_DATE 0xff
-#define TODC_TYPE_MC146818_ALARM_HOUR 0x05
-#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03
-#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01
-#define TODC_TYPE_MC146818_CENTURY 0xff
-#define TODC_TYPE_MC146818_FLAGS 0xff
-#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */
-#define TODC_TYPE_PC97307_SW_FLAGS 0
-#define TODC_TYPE_PC97307_YEAR 0x09
-#define TODC_TYPE_PC97307_MONTH 0x08
-#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_PC97307_HOURS 0x04
-#define TODC_TYPE_PC97307_MINUTES 0x02
-#define TODC_TYPE_PC97307_SECONDS 0x00
-#define TODC_TYPE_PC97307_CNTL_B 0x0a
-#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */
-#define TODC_TYPE_PC97307_WATCHDOG 0x0c
-#define TODC_TYPE_PC97307_INTERRUPTS 0x0d
-#define TODC_TYPE_PC97307_ALARM_DATE 0xff
-#define TODC_TYPE_PC97307_ALARM_HOUR 0x05
-#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03
-#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01
-#define TODC_TYPE_PC97307_CENTURY 0xff
-#define TODC_TYPE_PC97307_FLAGS 0xff
-#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0
-#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0
-
-/*
- * Define macros to allocate and init the todc_info_t table that will
- * be used by the todc_time.c routines.
- */
-#define TODC_ALLOC() \
- static todc_info_t todc_info_alloc; \
- todc_info_t *todc_info = &todc_info_alloc;
-
-#define TODC_INIT(clock_type, as0, as1, data, bits) { \
- todc_info->rtc_type = clock_type; \
- \
- todc_info->nvram_as0 = (unsigned int)(as0); \
- todc_info->nvram_as1 = (unsigned int)(as1); \
- todc_info->nvram_data = (unsigned int)(data); \
- \
- todc_info->as0_bits = (bits); \
- \
- todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \
- todc_info->sw_flags = clock_type ##_SW_FLAGS; \
- \
- todc_info->year = clock_type ##_YEAR; \
- todc_info->month = clock_type ##_MONTH; \
- todc_info->day_of_month = clock_type ##_DOM; \
- todc_info->day_of_week = clock_type ##_DOW; \
- todc_info->hours = clock_type ##_HOURS; \
- todc_info->minutes = clock_type ##_MINUTES; \
- todc_info->seconds = clock_type ##_SECONDS; \
- todc_info->control_b = clock_type ##_CNTL_B; \
- todc_info->control_a = clock_type ##_CNTL_A; \
- todc_info->watchdog = clock_type ##_WATCHDOG; \
- todc_info->interrupts = clock_type ##_INTERRUPTS; \
- todc_info->alarm_date = clock_type ##_ALARM_DATE; \
- todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \
- todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \
- todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \
- todc_info->century = clock_type ##_CENTURY; \
- todc_info->flags = clock_type ##_FLAGS; \
- \
- todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \
- todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \
-}
-
-extern todc_info_t *todc_info;
-
-unsigned char todc_direct_read_val(int addr);
-void todc_direct_write_val(int addr, unsigned char val);
-unsigned char todc_m48txx_read_val(int addr);
-void todc_m48txx_write_val(int addr, unsigned char val);
-unsigned char todc_mc146818_read_val(int addr);
-void todc_mc146818_write_val(int addr, unsigned char val);
-
-long todc_time_init(void);
-unsigned long todc_get_rtc_time(void);
-int todc_set_rtc_time(unsigned long nowtime);
-void todc_calibrate_decr(void);
-
-#endif /* __PPC_KERNEL_TODC_H */
diff --git a/include/asm-ppc/traps.h b/include/asm-ppc/traps.h
deleted file mode 100644
index 68e7326b56f..00000000000
--- a/include/asm-ppc/traps.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/traps.h>
diff --git a/include/asm-ppc/zorro.h b/include/asm-ppc/zorro.h
deleted file mode 100644
index 1e5fbc65e77..00000000000
--- a/include/asm-ppc/zorro.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _ASM_PPC_ZORRO_H
-#define _ASM_PPC_ZORRO_H
-
-#include <asm/io.h>
-
-#define z_readb in_8
-#define z_readw in_be16
-#define z_readl in_be32
-
-#define z_writeb(val, port) out_8((port), (val))
-#define z_writew(val, port) out_be16((port), (val))
-#define z_writel(val, port) out_be32((port), (val))
-
-#define z_memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-extern void *__ioremap(unsigned long address, unsigned long size,
- unsigned long flags);
-
-extern void *ioremap(unsigned long address, unsigned long size);
-extern void iounmap(void *addr);
-
-extern void *__ioremap(unsigned long address, unsigned long size,
- unsigned long flags);
-
-#define z_ioremap ioremap
-#define z_iounmap iounmap
-
-#endif /* _ASM_PPC_ZORRO_H */
diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild
index 13c9805349f..bb5e9edb982 100644
--- a/include/asm-s390/Kbuild
+++ b/include/asm-s390/Kbuild
@@ -8,6 +8,9 @@ header-y += ucontext.h
header-y += vtoc.h
header-y += zcrypt.h
header-y += kvm.h
+header-y += chsc.h
unifdef-y += cmb.h
unifdef-y += debug.h
+unifdef-y += chpid.h
+unifdef-y += schid.h
diff --git a/include/asm-s390/airq.h b/include/asm-s390/airq.h
index 41d028cb52a..1ac80d6b058 100644
--- a/include/asm-s390/airq.h
+++ b/include/asm-s390/airq.h
@@ -13,7 +13,7 @@
typedef void (*adapter_int_handler_t)(void *, void *);
-void *s390_register_adapter_interrupt(adapter_int_handler_t, void *);
-void s390_unregister_adapter_interrupt(void *);
+void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8);
+void s390_unregister_adapter_interrupt(void *, u8);
#endif /* _ASM_S390_AIRQ_H */
diff --git a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h
index 066aa70518c..ba007d8df94 100644
--- a/include/asm-s390/ccwdev.h
+++ b/include/asm-s390/ccwdev.h
@@ -12,6 +12,7 @@
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <asm/fcx.h>
/* structs from asm/cio.h */
struct irb;
@@ -157,6 +158,17 @@ extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *,
extern int ccw_device_resume(struct ccw_device *);
extern int ccw_device_halt(struct ccw_device *, unsigned long);
extern int ccw_device_clear(struct ccw_device *, unsigned long);
+int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
+ unsigned long intparm, u8 lpm, u8 key);
+int ccw_device_tm_start_key(struct ccw_device *, struct tcw *,
+ unsigned long, u8, u8);
+int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *,
+ unsigned long, u8, u8, int);
+int ccw_device_tm_start(struct ccw_device *, struct tcw *,
+ unsigned long, u8);
+int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *,
+ unsigned long, u8, int);
+int ccw_device_tm_intrg(struct ccw_device *cdev);
extern int ccw_device_set_online(struct ccw_device *cdev);
extern int ccw_device_set_offline(struct ccw_device *cdev);
diff --git a/include/asm-s390/chpid.h b/include/asm-s390/chpid.h
index b203336fd89..dfe3c7f3439 100644
--- a/include/asm-s390/chpid.h
+++ b/include/asm-s390/chpid.h
@@ -10,7 +10,6 @@
#include <linux/string.h>
#include <asm/types.h>
-#include <asm/cio.h>
#define __MAX_CHPID 255
@@ -21,6 +20,9 @@ struct chp_id {
u8 id;
} __attribute__((packed));
+#ifdef __KERNEL__
+#include <asm/cio.h>
+
static inline void chp_id_init(struct chp_id *chpid)
{
memset(chpid, 0, sizeof(struct chp_id));
@@ -49,5 +51,6 @@ static inline int chp_id_is_valid(struct chp_id *chpid)
#define chp_id_for_each(c) \
for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c))
+#endif /* __KERNEL */
#endif /* _ASM_S390_CHPID_H */
diff --git a/include/asm-s390/chsc.h b/include/asm-s390/chsc.h
new file mode 100644
index 00000000000..d38d0cf62d4
--- /dev/null
+++ b/include/asm-s390/chsc.h
@@ -0,0 +1,127 @@
+/*
+ * ioctl interface for /dev/chsc
+ *
+ * Copyright 2008 IBM Corp.
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ */
+
+#ifndef _ASM_CHSC_H
+#define _ASM_CHSC_H
+
+#include <asm/chpid.h>
+#include <asm/schid.h>
+
+struct chsc_async_header {
+ __u16 length;
+ __u16 code;
+ __u32 cmd_dependend;
+ __u32 key : 4;
+ __u32 : 28;
+ struct subchannel_id sid;
+} __attribute__ ((packed));
+
+struct chsc_async_area {
+ struct chsc_async_header header;
+ __u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */];
+} __attribute__ ((packed));
+
+
+struct chsc_response_struct {
+ __u16 length;
+ __u16 code;
+ __u32 parms;
+ __u8 data[PAGE_SIZE - 8];
+} __attribute__ ((packed));
+
+struct chsc_chp_cd {
+ struct chp_id chpid;
+ int m;
+ int fmt;
+ struct chsc_response_struct cpcb;
+};
+
+struct chsc_cu_cd {
+ __u16 cun;
+ __u8 cssid;
+ int m;
+ int fmt;
+ struct chsc_response_struct cucb;
+};
+
+struct chsc_sch_cud {
+ struct subchannel_id schid;
+ int fmt;
+ struct chsc_response_struct scub;
+};
+
+struct conf_id {
+ int m;
+ __u8 cssid;
+ __u8 ssid;
+};
+
+struct chsc_conf_info {
+ struct conf_id id;
+ int fmt;
+ struct chsc_response_struct scid;
+};
+
+struct ccl_parm_chpid {
+ int m;
+ struct chp_id chp;
+};
+
+struct ccl_parm_cssids {
+ __u8 f_cssid;
+ __u8 l_cssid;
+};
+
+struct chsc_comp_list {
+ struct {
+ enum {
+ CCL_CU_ON_CHP = 1,
+ CCL_CHP_TYPE_CAP = 2,
+ CCL_CSS_IMG = 4,
+ CCL_CSS_IMG_CONF_CHAR = 5,
+ CCL_IOP_CHP = 6,
+ } ctype;
+ int fmt;
+ struct ccl_parm_chpid chpid;
+ struct ccl_parm_cssids cssids;
+ } req;
+ struct chsc_response_struct sccl;
+};
+
+struct chsc_dcal {
+ struct {
+ enum {
+ DCAL_CSS_IID_PN = 4,
+ } atype;
+ __u32 list_parm[2];
+ int fmt;
+ } req;
+ struct chsc_response_struct sdcal;
+};
+
+struct chsc_cpd_info {
+ struct chp_id chpid;
+ int m;
+ int fmt;
+ int rfmt;
+ int c;
+ struct chsc_response_struct chpdb;
+};
+
+#define CHSC_IOCTL_MAGIC 'c'
+
+#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area)
+#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \
+ struct chsc_chp_cd)
+#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd)
+#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud)
+#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info)
+#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list)
+#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
+#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
+
+#endif
diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
index 0818ecd30ca..6dccb071aec 100644
--- a/include/asm-s390/cio.h
+++ b/include/asm-s390/cio.h
@@ -16,7 +16,7 @@
#define __MAX_CSSID 0
/**
- * struct scsw - subchannel status word
+ * struct cmd_scsw - command-mode subchannel status word
* @key: subchannel key
* @sctl: suspend control
* @eswf: esw format
@@ -38,7 +38,7 @@
* @cstat: subchannel status
* @count: residual count
*/
-struct scsw {
+struct cmd_scsw {
__u32 key : 4;
__u32 sctl : 1;
__u32 eswf : 1;
@@ -61,6 +61,114 @@ struct scsw {
__u32 count : 16;
} __attribute__ ((packed));
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+ u32 key:4;
+ u32 :1;
+ u32 eswf:1;
+ u32 cc:2;
+ u32 fmt:3;
+ u32 x:1;
+ u32 q:1;
+ u32 :1;
+ u32 ectl:1;
+ u32 pno:1;
+ u32 :1;
+ u32 fctl:3;
+ u32 actl:7;
+ u32 stctl:5;
+ u32 tcw;
+ u32 dstat:8;
+ u32 cstat:8;
+ u32 fcxs:8;
+ u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+ struct cmd_scsw cmd;
+ struct tm_scsw tm;
+} __attribute__ ((packed));
+
+int scsw_is_tm(union scsw *scsw);
+u32 scsw_key(union scsw *scsw);
+u32 scsw_eswf(union scsw *scsw);
+u32 scsw_cc(union scsw *scsw);
+u32 scsw_ectl(union scsw *scsw);
+u32 scsw_pno(union scsw *scsw);
+u32 scsw_fctl(union scsw *scsw);
+u32 scsw_actl(union scsw *scsw);
+u32 scsw_stctl(union scsw *scsw);
+u32 scsw_dstat(union scsw *scsw);
+u32 scsw_cstat(union scsw *scsw);
+int scsw_is_solicited(union scsw *scsw);
+int scsw_is_valid_key(union scsw *scsw);
+int scsw_is_valid_eswf(union scsw *scsw);
+int scsw_is_valid_cc(union scsw *scsw);
+int scsw_is_valid_ectl(union scsw *scsw);
+int scsw_is_valid_pno(union scsw *scsw);
+int scsw_is_valid_fctl(union scsw *scsw);
+int scsw_is_valid_actl(union scsw *scsw);
+int scsw_is_valid_stctl(union scsw *scsw);
+int scsw_is_valid_dstat(union scsw *scsw);
+int scsw_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_valid_key(union scsw *scsw);
+int scsw_cmd_is_valid_sctl(union scsw *scsw);
+int scsw_cmd_is_valid_eswf(union scsw *scsw);
+int scsw_cmd_is_valid_cc(union scsw *scsw);
+int scsw_cmd_is_valid_fmt(union scsw *scsw);
+int scsw_cmd_is_valid_pfch(union scsw *scsw);
+int scsw_cmd_is_valid_isic(union scsw *scsw);
+int scsw_cmd_is_valid_alcc(union scsw *scsw);
+int scsw_cmd_is_valid_ssi(union scsw *scsw);
+int scsw_cmd_is_valid_zcc(union scsw *scsw);
+int scsw_cmd_is_valid_ectl(union scsw *scsw);
+int scsw_cmd_is_valid_pno(union scsw *scsw);
+int scsw_cmd_is_valid_fctl(union scsw *scsw);
+int scsw_cmd_is_valid_actl(union scsw *scsw);
+int scsw_cmd_is_valid_stctl(union scsw *scsw);
+int scsw_cmd_is_valid_dstat(union scsw *scsw);
+int scsw_cmd_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_solicited(union scsw *scsw);
+int scsw_tm_is_valid_key(union scsw *scsw);
+int scsw_tm_is_valid_eswf(union scsw *scsw);
+int scsw_tm_is_valid_cc(union scsw *scsw);
+int scsw_tm_is_valid_fmt(union scsw *scsw);
+int scsw_tm_is_valid_x(union scsw *scsw);
+int scsw_tm_is_valid_q(union scsw *scsw);
+int scsw_tm_is_valid_ectl(union scsw *scsw);
+int scsw_tm_is_valid_pno(union scsw *scsw);
+int scsw_tm_is_valid_fctl(union scsw *scsw);
+int scsw_tm_is_valid_actl(union scsw *scsw);
+int scsw_tm_is_valid_stctl(union scsw *scsw);
+int scsw_tm_is_valid_dstat(union scsw *scsw);
+int scsw_tm_is_valid_cstat(union scsw *scsw);
+int scsw_tm_is_valid_fcxs(union scsw *scsw);
+int scsw_tm_is_valid_schxs(union scsw *scsw);
+int scsw_tm_is_solicited(union scsw *scsw);
+
#define SCSW_FCTL_CLEAR_FUNC 0x1
#define SCSW_FCTL_HALT_FUNC 0x2
#define SCSW_FCTL_START_FUNC 0x4
@@ -303,7 +411,7 @@ struct esw3 {
* if applicable).
*/
struct irb {
- struct scsw scsw;
+ union scsw scsw;
union {
struct esw0 esw0;
struct esw1 esw1;
diff --git a/include/asm-s390/elf.h b/include/asm-s390/elf.h
index b3ac262c458..3cad5692381 100644
--- a/include/asm-s390/elf.h
+++ b/include/asm-s390/elf.h
@@ -113,6 +113,9 @@
typedef s390_fp_regs elf_fpregset_t;
typedef s390_regs elf_gregset_t;
+typedef s390_fp_regs compat_elf_fpregset_t;
+typedef s390_compat_regs compat_elf_gregset_t;
+
#include <linux/sched.h> /* for task_struct */
#include <asm/system.h> /* for save_access_regs */
#include <asm/mmu_context.h>
@@ -123,6 +126,10 @@ typedef s390_regs elf_gregset_t;
#define elf_check_arch(x) \
(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
&& (x)->e_ident[EI_CLASS] == ELF_CLASS)
+#define compat_elf_check_arch(x) \
+ (((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+ && (x)->e_ident[EI_CLASS] == ELF_CLASS)
+#define compat_start_thread start_thread31
/* For SVR4/S390 the function pointer to be registered with `atexit` is
passed in R14. */
@@ -131,6 +138,7 @@ typedef s390_regs elf_gregset_t;
_r->gprs[14] = 0; \
} while (0)
+#define CORE_DUMP_USE_REGSET
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
@@ -140,44 +148,6 @@ typedef s390_regs elf_gregset_t;
that it will "exec", and that there is sufficient room for the brk. */
#define ELF_ET_DYN_BASE (STACK_TOP / 3 * 2)
-/* Wow, the "main" arch needs arch dependent functions too.. :) */
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- now struct_user_regs, they are different) */
-
-static inline int dump_regs(struct pt_regs *ptregs, elf_gregset_t *regs)
-{
- memcpy(&regs->psw, &ptregs->psw, sizeof(regs->psw)+sizeof(regs->gprs));
- save_access_regs(regs->acrs);
- regs->orig_gpr2 = ptregs->orig_gpr2;
- return 1;
-}
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) dump_regs(regs, &pr_reg);
-
-static inline int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
- struct pt_regs *ptregs = task_pt_regs(tsk);
- memcpy(&regs->psw, &ptregs->psw, sizeof(regs->psw)+sizeof(regs->gprs));
- memcpy(regs->acrs, tsk->thread.acrs, sizeof(regs->acrs));
- regs->orig_gpr2 = ptregs->orig_gpr2;
- return 1;
-}
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, regs) dump_task_regs(tsk, regs)
-
-static inline int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
-{
- if (tsk == current)
- save_fp_regs(fpregs);
- else
- memcpy(fpregs, &tsk->thread.fp_regs, sizeof(elf_fpregset_t));
- return 1;
-}
-
-#define ELF_CORE_COPY_FPREGS(tsk, fpregs) dump_task_fpu(tsk, fpregs)
-
-
/* This yields a mask that user programs can use to figure out what
instruction set this CPU supports. */
@@ -204,7 +174,10 @@ do { \
set_personality(PER_SVR4); \
else if (current->personality != PER_LINUX32) \
set_personality(PER_LINUX); \
- clear_thread_flag(TIF_31BIT); \
+ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ set_thread_flag(TIF_31BIT); \
+ else \
+ clear_thread_flag(TIF_31BIT); \
} while (0)
#endif /* __s390x__ */
diff --git a/include/asm-s390/etr.h b/include/asm-s390/etr.h
index b498f19bb9a..80ef58c6197 100644
--- a/include/asm-s390/etr.h
+++ b/include/asm-s390/etr.h
@@ -122,7 +122,7 @@ struct etr_aib {
} __attribute__ ((packed,aligned(8)));
/* ETR interruption parameter */
-struct etr_interruption_parameter {
+struct etr_irq_parm {
unsigned int _pad0 : 8;
unsigned int pc0 : 1; /* port 0 state change */
unsigned int pc1 : 1; /* port 1 state change */
@@ -213,7 +213,46 @@ static inline int etr_ptff(void *ptff_block, unsigned int func)
#define ETR_PTFF_SGS 0x43 /* set gross steering rate */
/* Functions needed by the machine check handler */
-extern void etr_switch_to_local(void);
-extern void etr_sync_check(void);
+void etr_switch_to_local(void);
+void etr_sync_check(void);
+
+/* STP interruption parameter */
+struct stp_irq_parm {
+ unsigned int _pad0 : 14;
+ unsigned int tsc : 1; /* Timing status change */
+ unsigned int lac : 1; /* Link availability change */
+ unsigned int tcpc : 1; /* Time control parameter change */
+ unsigned int _pad2 : 15;
+} __attribute__ ((packed));
+
+#define STP_OP_SYNC 1
+#define STP_OP_CTRL 3
+
+struct stp_sstpi {
+ unsigned int rsvd0;
+ unsigned int rsvd1 : 8;
+ unsigned int stratum : 8;
+ unsigned int vbits : 16;
+ unsigned int leaps : 16;
+ unsigned int tmd : 4;
+ unsigned int ctn : 4;
+ unsigned int rsvd2 : 3;
+ unsigned int c : 1;
+ unsigned int tst : 4;
+ unsigned int tzo : 16;
+ unsigned int dsto : 16;
+ unsigned int ctrl : 16;
+ unsigned int rsvd3 : 16;
+ unsigned int tto;
+ unsigned int rsvd4;
+ unsigned int ctnid[3];
+ unsigned int rsvd5;
+ unsigned int todoff[4];
+ unsigned int rsvd6[48];
+} __attribute__ ((packed));
+
+/* Functions needed by the machine check handler */
+void stp_sync_check(void);
+void stp_island_check(void);
#endif /* __S390_ETR_H */
diff --git a/include/asm-s390/fcx.h b/include/asm-s390/fcx.h
new file mode 100644
index 00000000000..8be1f3a5804
--- /dev/null
+++ b/include/asm-s390/fcx.h
@@ -0,0 +1,311 @@
+/*
+ * Functions for assembling fcx enabled I/O control blocks.
+ *
+ * Copyright IBM Corp. 2008
+ * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_FCX_H
+#define _ASM_S390_FCX_H _ASM_S390_FCX_H
+
+#include <linux/types.h>
+
+#define TCW_FORMAT_DEFAULT 0
+#define TCW_TIDAW_FORMAT_DEFAULT 0
+#define TCW_FLAGS_INPUT_TIDA 1 << (23 - 5)
+#define TCW_FLAGS_TCCB_TIDA 1 << (23 - 6)
+#define TCW_FLAGS_OUTPUT_TIDA 1 << (23 - 7)
+#define TCW_FLAGS_TIDAW_FORMAT(x) ((x) & 3) << (23 - 9)
+#define TCW_FLAGS_GET_TIDAW_FORMAT(x) (((x) >> (23 - 9)) & 3)
+
+/**
+ * struct tcw - Transport Control Word (TCW)
+ * @format: TCW format
+ * @flags: TCW flags
+ * @tccbl: Transport-Command-Control-Block Length
+ * @r: Read Operations
+ * @w: Write Operations
+ * @output: Output-Data Address
+ * @input: Input-Data Address
+ * @tsb: Transport-Status-Block Address
+ * @tccb: Transport-Command-Control-Block Address
+ * @output_count: Output Count
+ * @input_count: Input Count
+ * @intrg: Interrogate TCW Address
+ */
+struct tcw {
+ u32 format:2;
+ u32 :6;
+ u32 flags:24;
+ u32 :8;
+ u32 tccbl:6;
+ u32 r:1;
+ u32 w:1;
+ u32 :16;
+ u64 output;
+ u64 input;
+ u64 tsb;
+ u64 tccb;
+ u32 output_count;
+ u32 input_count;
+ u32 :32;
+ u32 :32;
+ u32 :32;
+ u32 intrg;
+} __attribute__ ((packed, aligned(64)));
+
+#define TIDAW_FLAGS_LAST 1 << (7 - 0)
+#define TIDAW_FLAGS_SKIP 1 << (7 - 1)
+#define TIDAW_FLAGS_DATA_INT 1 << (7 - 2)
+#define TIDAW_FLAGS_TTIC 1 << (7 - 3)
+#define TIDAW_FLAGS_INSERT_CBC 1 << (7 - 4)
+
+/**
+ * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
+ * @flags: TIDAW flags. Can be an arithmetic OR of the following constants:
+ * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT,
+ * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC
+ * @count: Count
+ * @addr: Address
+ */
+struct tidaw {
+ u32 flags:8;
+ u32 :24;
+ u32 count;
+ u64 addr;
+} __attribute__ ((packed, aligned(16)));
+
+/**
+ * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA)
+ * @dev_time: Device Time
+ * @def_time: Defer Time
+ * @queue_time: Queue Time
+ * @dev_busy_time: Device-Busy Time
+ * @dev_act_time: Device-Active-Only Time
+ * @sense: Sense Data (if present)
+ */
+struct tsa_iostat {
+ u32 dev_time;
+ u32 def_time;
+ u32 queue_time;
+ u32 dev_busy_time;
+ u32 dev_act_time;
+ u8 sense[32];
+} __attribute__ ((packed));
+
+/**
+ * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA)
+ * @rc: Reason Code
+ * @rcq: Reason Code Qualifier
+ * @sense: Sense Data (if present)
+ */
+struct tsa_ddpc {
+ u32 :24;
+ u32 rc:8;
+ u8 rcq[16];
+ u8 sense[32];
+} __attribute__ ((packed));
+
+#define TSA_INTRG_FLAGS_CU_STATE_VALID 1 << (7 - 0)
+#define TSA_INTRG_FLAGS_DEV_STATE_VALID 1 << (7 - 1)
+#define TSA_INTRG_FLAGS_OP_STATE_VALID 1 << (7 - 2)
+
+/**
+ * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
+ * @format: Format
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID,
+ * %TSA_INTRG_FLAGS_OP_STATE_VALID
+ * @cu_state: Controle-Unit State
+ * @dev_state: Device State
+ * @op_state: Operation State
+ * @sd_info: State-Dependent Information
+ * @dl_id: Device-Level Identifier
+ * @dd_data: Device-Dependent Data
+ */
+struct tsa_intrg {
+ u32 format:8;
+ u32 flags:8;
+ u32 cu_state:8;
+ u32 dev_state:8;
+ u32 op_state:8;
+ u32 :24;
+ u8 sd_info[12];
+ u32 dl_id;
+ u8 dd_data[28];
+} __attribute__ ((packed));
+
+#define TSB_FORMAT_NONE 0
+#define TSB_FORMAT_IOSTAT 1
+#define TSB_FORMAT_DDPC 2
+#define TSB_FORMAT_INTRG 3
+
+#define TSB_FLAGS_DCW_OFFSET_VALID 1 << (7 - 0)
+#define TSB_FLAGS_COUNT_VALID 1 << (7 - 1)
+#define TSB_FLAGS_CACHE_MISS 1 << (7 - 2)
+#define TSB_FLAGS_TIME_VALID 1 << (7 - 3)
+#define TSB_FLAGS_FORMAT(x) ((x) & 7)
+#define TSB_FORMAT(t) ((t)->flags & 7)
+
+/**
+ * struct tsb - Transport-Status Block (TSB)
+ * @length: Length
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS,
+ * %TSB_FLAGS_TIME_VALID
+ * @dcw_offset: DCW Offset
+ * @count: Count
+ * @tsa: Transport-Status-Area
+ */
+struct tsb {
+ u32 length:8;
+ u32 flags:8;
+ u32 dcw_offset:16;
+ u32 count;
+ u32 :32;
+ union {
+ struct tsa_iostat iostat;
+ struct tsa_ddpc ddpc;
+ struct tsa_intrg intrg;
+ } __attribute__ ((packed)) tsa;
+} __attribute__ ((packed, aligned(8)));
+
+#define DCW_INTRG_FORMAT_DEFAULT 0
+
+#define DCW_INTRG_RC_UNSPECIFIED 0
+#define DCW_INTRG_RC_TIMEOUT 1
+
+#define DCW_INTRG_RCQ_UNSPECIFIED 0
+#define DCW_INTRG_RCQ_PRIMARY 1
+#define DCW_INTRG_RCQ_SECONDARY 2
+
+#define DCW_INTRG_FLAGS_MPM 1 < (7 - 0)
+#define DCW_INTRG_FLAGS_PPR 1 < (7 - 1)
+#define DCW_INTRG_FLAGS_CRIT 1 < (7 - 2)
+
+/**
+ * struct dcw_intrg_data - Interrogate DCW data
+ * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT
+ * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED,
+ * %DCW_INTRG_RC_TIMEOUT
+ * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED,
+ * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY
+ * @lpm: Logical-Path Mask
+ * @pam: Path-Available Mask
+ * @pim: Path-Installed Mask
+ * @timeout: Timeout
+ * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM,
+ * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT
+ * @time: Time
+ * @prog_id: Program Identifier
+ * @prog_data: Program-Dependent Data
+ */
+struct dcw_intrg_data {
+ u32 format:8;
+ u32 rc:8;
+ u32 rcq:8;
+ u32 lpm:8;
+ u32 pam:8;
+ u32 pim:8;
+ u32 timeout:16;
+ u32 flags:8;
+ u32 :24;
+ u32 :32;
+ u64 time;
+ u64 prog_id;
+ u8 prog_data[0];
+} __attribute__ ((packed));
+
+#define DCW_FLAGS_CC 1 << (7 - 1)
+
+#define DCW_CMD_WRITE 0x01
+#define DCW_CMD_READ 0x02
+#define DCW_CMD_CONTROL 0x03
+#define DCW_CMD_SENSE 0x04
+#define DCW_CMD_SENSE_ID 0xe4
+#define DCW_CMD_INTRG 0x40
+
+/**
+ * struct dcw - Device-Command Word (DCW)
+ * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ,
+ * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG
+ * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC
+ * @cd_count: Control-Data Count
+ * @count: Count
+ * @cd: Control Data
+ */
+struct dcw {
+ u32 cmd:8;
+ u32 flags:8;
+ u32 :8;
+ u32 cd_count:8;
+ u32 count;
+ u8 cd[0];
+} __attribute__ ((packed));
+
+#define TCCB_FORMAT_DEFAULT 0x7f
+#define TCCB_MAX_DCW 30
+#define TCCB_MAX_SIZE (sizeof(struct tccb_tcah) + \
+ TCCB_MAX_DCW * sizeof(struct dcw) + \
+ sizeof(struct tccb_tcat))
+#define TCCB_SAC_DEFAULT 0xf901
+#define TCCB_SAC_INTRG 0xf902
+
+/**
+ * struct tccb_tcah - Transport-Command-Area Header (TCAH)
+ * @format: Format. Should be %TCCB_FORMAT_DEFAULT
+ * @tcal: Transport-Command-Area Length
+ * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG
+ * @prio: Priority
+ */
+struct tccb_tcah {
+ u32 format:8;
+ u32 :24;
+ u32 :24;
+ u32 tcal:8;
+ u32 sac:16;
+ u32 :8;
+ u32 prio:8;
+ u32 :32;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb_tcat - Transport-Command-Area Trailer (TCAT)
+ * @count: Transport Count
+ */
+struct tccb_tcat {
+ u32 :32;
+ u32 count;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb - (partial) Transport-Command-Control Block (TCCB)
+ * @tcah: TCAH
+ * @tca: Transport-Command Area
+ */
+struct tccb {
+ struct tccb_tcah tcah;
+ u8 tca[0];
+} __attribute__ ((packed, aligned(8)));
+
+struct tcw *tcw_get_intrg(struct tcw *tcw);
+void *tcw_get_data(struct tcw *tcw);
+struct tccb *tcw_get_tccb(struct tcw *tcw);
+struct tsb *tcw_get_tsb(struct tcw *tcw);
+
+void tcw_init(struct tcw *tcw, int r, int w);
+void tcw_finalize(struct tcw *tcw, int num_tidaws);
+
+void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw);
+void tcw_set_data(struct tcw *tcw, void *data, int use_tidal);
+void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb);
+void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb);
+
+void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac);
+void tsb_init(struct tsb *tsb);
+struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags,
+ void *cd, u8 cd_count, u32 count);
+struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags,
+ void *addr, u32 count);
+
+#endif /* _ASM_S390_FCX_H */
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
index c1b2e50392b..eaca6dff540 100644
--- a/include/asm-s390/ipl.h
+++ b/include/asm-s390/ipl.h
@@ -56,15 +56,19 @@ struct ipl_block_fcp {
u8 scp_data[];
} __attribute__((packed));
+#define DIAG308_VMPARM_SIZE 64
+
struct ipl_block_ccw {
- u8 load_param[8];
+ u8 load_parm[8];
u8 reserved1[84];
u8 reserved2[2];
u16 devno;
u8 vm_flags;
u8 reserved3[3];
u32 vm_parm_len;
- u8 reserved4[80];
+ u8 nss_name[8];
+ u8 vm_parm[DIAG308_VMPARM_SIZE];
+ u8 reserved4[8];
} __attribute__((packed));
struct ipl_parameter_block {
@@ -73,7 +77,7 @@ struct ipl_parameter_block {
struct ipl_block_fcp fcp;
struct ipl_block_ccw ccw;
} ipl_info;
-} __attribute__((packed));
+} __attribute__((packed,aligned(4096)));
/*
* IPL validity flags
@@ -86,6 +90,8 @@ extern void do_reipl(void);
extern void do_halt(void);
extern void do_poff(void);
extern void ipl_save_parameters(void);
+extern void ipl_update_parameters(void);
+extern void get_ipl_vmparm(char *);
enum {
IPL_DEVNO_VALID = 1,
@@ -147,6 +153,11 @@ enum diag308_flags {
DIAG308_FLAGS_LP_VALID = 0x80,
};
+enum diag308_vm_flags {
+ DIAG308_VM_FLAGS_NSS_VALID = 0x80,
+ DIAG308_VM_FLAGS_VP_VALID = 0x40,
+};
+
enum diag308_rc {
DIAG308_RC_OK = 1,
};
diff --git a/include/asm-s390/isc.h b/include/asm-s390/isc.h
new file mode 100644
index 00000000000..34bb8916db4
--- /dev/null
+++ b/include/asm-s390/isc.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_S390_ISC_H
+#define _ASM_S390_ISC_H
+
+#include <linux/types.h>
+
+/*
+ * I/O interruption subclasses used by drivers.
+ * Please add all used iscs here so that it is possible to distribute
+ * isc usage between drivers.
+ * Reminder: 0 is highest priority, 7 lowest.
+ */
+#define MAX_ISC 7
+
+/* Regular I/O interrupts. */
+#define IO_SCH_ISC 3 /* regular I/O subchannels */
+#define CONSOLE_ISC 1 /* console I/O subchannel */
+#define CHSC_SCH_ISC 7 /* CHSC subchannels */
+/* Adapter interrupts. */
+#define QDIO_AIRQ_ISC IO_SCH_ISC /* I/O subchannel in qdio mode */
+
+/* Functions for registration of I/O interruption subclasses */
+void isc_register(unsigned int isc);
+void isc_unregister(unsigned int isc);
+
+#endif /* _ASM_S390_ISC_H */
diff --git a/include/asm-s390/itcw.h b/include/asm-s390/itcw.h
new file mode 100644
index 00000000000..a9bc5c36b32
--- /dev/null
+++ b/include/asm-s390/itcw.h
@@ -0,0 +1,30 @@
+/*
+ * Functions for incremental construction of fcx enabled I/O control blocks.
+ *
+ * Copyright IBM Corp. 2008
+ * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_ITCW_H
+#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H
+
+#include <linux/types.h>
+#include <asm/fcx.h>
+
+#define ITCW_OP_READ 0
+#define ITCW_OP_WRITE 1
+
+struct itcw;
+
+struct tcw *itcw_get_tcw(struct itcw *itcw);
+size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws);
+struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
+ int max_tidaws, int intrg_max_tidaws);
+struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd,
+ u8 cd_count, u32 count);
+struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr,
+ u32 count);
+void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal);
+void itcw_finalize(struct itcw *itcw);
+
+#endif /* _ASM_S390_ITCW_H */
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
index c7f4f8e3e29..0bdb704ae05 100644
--- a/include/asm-s390/pgtable.h
+++ b/include/asm-s390/pgtable.h
@@ -29,6 +29,7 @@
* the S390 page table tree.
*/
#ifndef __ASSEMBLY__
+#include <linux/sched.h>
#include <linux/mm_types.h>
#include <asm/bitops.h>
#include <asm/bug.h>
@@ -223,6 +224,9 @@ extern char empty_zero_page[PAGE_SIZE];
#define _PAGE_SPECIAL 0x004 /* SW associated with special page */
#define __HAVE_ARCH_PTE_SPECIAL
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL)
+
/* Six different types of pages. */
#define _PAGE_TYPE_EMPTY 0x400
#define _PAGE_TYPE_NONE 0x401
@@ -681,7 +685,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- pte_val(pte) &= PAGE_MASK;
+ pte_val(pte) &= _PAGE_CHG_MASK;
pte_val(pte) |= pgprot_val(newprot);
return pte;
}
diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h
index a00f79dd323..4af80af2a88 100644
--- a/include/asm-s390/processor.h
+++ b/include/asm-s390/processor.h
@@ -143,11 +143,19 @@ struct stack_frame {
/*
* Do necessary setup to start up a new thread.
*/
-#define start_thread(regs, new_psw, new_stackp) do { \
+#define start_thread(regs, new_psw, new_stackp) do { \
set_fs(USER_DS); \
regs->psw.mask = psw_user_bits; \
- regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
- regs->gprs[15] = new_stackp ; \
+ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
+ regs->gprs[15] = new_stackp; \
+} while (0)
+
+#define start_thread31(regs, new_psw, new_stackp) do { \
+ set_fs(USER_DS); \
+ regs->psw.mask = psw_user32_bits; \
+ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
+ regs->gprs[15] = new_stackp; \
+ crst_table_downgrade(current->mm, 1UL << 31); \
} while (0)
/* Forward declaration, a strange C thing */
@@ -328,16 +336,6 @@ extern void (*s390_base_mcck_handler_fn)(void);
extern void (*s390_base_pgm_handler_fn)(void);
extern void (*s390_base_ext_handler_fn)(void);
-/*
- * CPU idle notifier chain.
- */
-#define S390_CPU_IDLE 0
-#define S390_CPU_NOT_IDLE 1
-
-struct notifier_block;
-int register_idle_notifier(struct notifier_block *nb);
-int unregister_idle_notifier(struct notifier_block *nb);
-
#define ARCH_LOW_ADDRESS_LIMIT 0x7fffffffUL
#endif
diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h
index d7d4e2eb3e6..af2c9ac28a0 100644
--- a/include/asm-s390/ptrace.h
+++ b/include/asm-s390/ptrace.h
@@ -215,6 +215,12 @@ typedef struct
unsigned long addr;
} __attribute__ ((aligned(8))) psw_t;
+typedef struct
+{
+ __u32 mask;
+ __u32 addr;
+} __attribute__ ((aligned(8))) psw_compat_t;
+
#ifndef __s390x__
#define PSW_MASK_PER 0x40000000UL
@@ -292,6 +298,15 @@ typedef struct
unsigned long orig_gpr2;
} s390_regs;
+typedef struct
+{
+ psw_compat_t psw;
+ __u32 gprs[NUM_GPRS];
+ __u32 acrs[NUM_ACRS];
+ __u32 orig_gpr2;
+} s390_compat_regs;
+
+
#ifdef __KERNEL__
#include <asm/setup.h>
#include <asm/page.h>
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index 11240342a0f..6813772171f 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -1,404 +1,382 @@
/*
* linux/include/asm-s390/qdio.h
*
- * Linux for S/390 QDIO base support, Hipersocket base support
- * version 2
- *
- * Copyright 2000,2002 IBM Corporation
+ * Copyright 2000,2008 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
+ * Jan Glauber <jang@linux.vnet.ibm.com>
*
*/
#ifndef __QDIO_H__
#define __QDIO_H__
-/* note, that most of the typedef's are from ingo. */
-
#include <linux/interrupt.h>
#include <asm/cio.h>
#include <asm/ccwdev.h>
-#define QDIO_NAME "qdio "
-
-#ifndef __s390x__
-#define QDIO_32_BIT
-#endif /* __s390x__ */
-
-/**** CONSTANTS, that are relied on without using these symbols *****/
-#define QDIO_MAX_QUEUES_PER_IRQ 32 /* used in width of unsigned int */
-/************************ END of CONSTANTS **************************/
-#define QDIO_MAX_BUFFERS_PER_Q 128 /* must be a power of 2 (%x=&(x-1)*/
-#define QDIO_BUF_ORDER 7 /* 2**this == number of pages used for sbals in 1 q */
-#define QDIO_MAX_ELEMENTS_PER_BUFFER 16
-#define SBAL_SIZE 256
-
-#define QDIO_QETH_QFMT 0
-#define QDIO_ZFCP_QFMT 1
-#define QDIO_IQDIO_QFMT 2
-#define QDIO_IQDIO_QFMT_ASYNCH 3
-
-struct qdio_buffer_element{
- unsigned int flags;
- unsigned int length;
-#ifdef QDIO_32_BIT
- void *reserved;
-#endif /* QDIO_32_BIT */
- void *addr;
-} __attribute__ ((packed,aligned(16)));
-
-struct qdio_buffer{
- volatile struct qdio_buffer_element element[16];
-} __attribute__ ((packed,aligned(256)));
-
-
-/* params are: ccw_device, status, qdio_error, siga_error,
- queue_number, first element processed, number of elements processed,
- int_parm */
-typedef void qdio_handler_t(struct ccw_device *,unsigned int,unsigned int,
- unsigned int,unsigned int,int,int,unsigned long);
-
-
-#define QDIO_STATUS_INBOUND_INT 0x01
-#define QDIO_STATUS_OUTBOUND_INT 0x02
-#define QDIO_STATUS_LOOK_FOR_ERROR 0x04
-#define QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR 0x08
-#define QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR 0x10
-#define QDIO_STATUS_ACTIVATE_CHECK_CONDITION 0x20
-
-#define QDIO_SIGA_ERROR_ACCESS_EXCEPTION 0x10
-#define QDIO_SIGA_ERROR_B_BIT_SET 0x20
-
-/* for qdio_initialize */
-#define QDIO_INBOUND_0COPY_SBALS 0x01
-#define QDIO_OUTBOUND_0COPY_SBALS 0x02
-#define QDIO_USE_OUTBOUND_PCIS 0x04
-
-/* for qdio_cleanup */
-#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01
-#define QDIO_FLAG_CLEANUP_USING_HALT 0x02
-
-struct qdio_initialize {
- struct ccw_device *cdev;
- unsigned char q_format;
- unsigned char adapter_name[8];
- unsigned int qib_param_field_format; /*adapter dependent*/
- /* pointer to 128 bytes or NULL, if no param field */
- unsigned char *qib_param_field; /* adapter dependent */
- /* pointer to no_queues*128 words of data or NULL */
- unsigned long *input_slib_elements;
- unsigned long *output_slib_elements;
- unsigned int min_input_threshold;
- unsigned int max_input_threshold;
- unsigned int min_output_threshold;
- unsigned int max_output_threshold;
- unsigned int no_input_qs;
- unsigned int no_output_qs;
- qdio_handler_t *input_handler;
- qdio_handler_t *output_handler;
- unsigned long int_parm;
- unsigned long flags;
- void **input_sbal_addr_array; /* addr of n*128 void ptrs */
- void **output_sbal_addr_array; /* addr of n*128 void ptrs */
-};
-
-extern int qdio_initialize(struct qdio_initialize *init_data);
-extern int qdio_allocate(struct qdio_initialize *init_data);
-extern int qdio_establish(struct qdio_initialize *init_data);
-
-extern int qdio_activate(struct ccw_device *,int flags);
-
-#define QDIO_STATE_MUST_USE_OUTB_PCI 0x00000001
-#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */
-#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_initialize */
-#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */
-#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */
-extern unsigned long qdio_get_status(int irq);
-
-
-#define QDIO_FLAG_SYNC_INPUT 0x01
-#define QDIO_FLAG_SYNC_OUTPUT 0x02
-#define QDIO_FLAG_UNDER_INTERRUPT 0x04
-#define QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT 0x08 /* no effect on
- adapter interrupts */
-#define QDIO_FLAG_DONT_SIGA 0x10
-#define QDIO_FLAG_PCI_OUT 0x20
-
-extern int do_QDIO(struct ccw_device*, unsigned int flags,
- unsigned int queue_number,
- unsigned int qidx,unsigned int count,
- struct qdio_buffer *buffers);
-
-extern int qdio_get_ssqd_pct(struct ccw_device*);
-extern int qdio_synchronize(struct ccw_device*, unsigned int flags,
- unsigned int queue_number);
-
-extern int qdio_cleanup(struct ccw_device*, int how);
-extern int qdio_shutdown(struct ccw_device*, int how);
-extern int qdio_free(struct ccw_device*);
-
-unsigned char qdio_get_slsb_state(struct ccw_device*, unsigned int flag,
- unsigned int queue_number,
- unsigned int qidx);
-
-extern void qdio_init_scrubber(void);
-
+#define QDIO_MAX_QUEUES_PER_IRQ 32
+#define QDIO_MAX_BUFFERS_PER_Q 128
+#define QDIO_MAX_BUFFERS_MASK (QDIO_MAX_BUFFERS_PER_Q - 1)
+#define QDIO_MAX_ELEMENTS_PER_BUFFER 16
+#define QDIO_SBAL_SIZE 256
+
+#define QDIO_QETH_QFMT 0
+#define QDIO_ZFCP_QFMT 1
+#define QDIO_IQDIO_QFMT 2
+
+/**
+ * struct qdesfmt0 - queue descriptor, format 0
+ * @sliba: storage list information block address
+ * @sla: storage list address
+ * @slsba: storage list state block address
+ * @akey: access key for DLIB
+ * @bkey: access key for SL
+ * @ckey: access key for SBALs
+ * @dkey: access key for SLSB
+ */
struct qdesfmt0 {
-#ifdef QDIO_32_BIT
- unsigned long res1; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long sliba; /* storage-list-information-block
- address */
-#ifdef QDIO_32_BIT
- unsigned long res2; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long sla; /* storage-list address */
-#ifdef QDIO_32_BIT
- unsigned long res3; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long slsba; /* storage-list-state-block address */
- unsigned int res4; /* reserved */
- unsigned int akey : 4; /* access key for DLIB */
- unsigned int bkey : 4; /* access key for SL */
- unsigned int ckey : 4; /* access key for SBALs */
- unsigned int dkey : 4; /* access key for SLSB */
- unsigned int res5 : 16; /* reserved */
+ u64 sliba;
+ u64 sla;
+ u64 slsba;
+ u32 : 32;
+ u32 akey : 4;
+ u32 bkey : 4;
+ u32 ckey : 4;
+ u32 dkey : 4;
+ u32 : 16;
} __attribute__ ((packed));
-/*
- * Queue-Description record (QDR)
+/**
+ * struct qdr - queue description record (QDR)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @ac: adapter characteristics
+ * @iqdcnt: input queue descriptor count
+ * @oqdcnt: output queue descriptor count
+ * @iqdsz: inpout queue descriptor size
+ * @oqdsz: output queue descriptor size
+ * @qiba: queue information block address
+ * @qkey: queue information block key
+ * @qdf0: queue descriptions
*/
struct qdr {
- unsigned int qfmt : 8; /* queue format */
- unsigned int pfmt : 8; /* impl. dep. parameter format */
- unsigned int res1 : 8; /* reserved */
- unsigned int ac : 8; /* adapter characteristics */
- unsigned int res2 : 8; /* reserved */
- unsigned int iqdcnt : 8; /* input-queue-descriptor count */
- unsigned int res3 : 8; /* reserved */
- unsigned int oqdcnt : 8; /* output-queue-descriptor count */
- unsigned int res4 : 8; /* reserved */
- unsigned int iqdsz : 8; /* input-queue-descriptor size */
- unsigned int res5 : 8; /* reserved */
- unsigned int oqdsz : 8; /* output-queue-descriptor size */
- unsigned int res6[9]; /* reserved */
-#ifdef QDIO_32_BIT
- unsigned long res7; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long qiba; /* queue-information-block address */
- unsigned int res8; /* reserved */
- unsigned int qkey : 4; /* queue-information-block key */
- unsigned int res9 : 28; /* reserved */
-/* union _qd {*/ /* why this? */
- struct qdesfmt0 qdf0[126];
-/* } qd;*/
-} __attribute__ ((packed,aligned(4096)));
-
-
-/*
- * queue information block (QIB)
- */
-#define QIB_AC_INBOUND_PCI_SUPPORTED 0x80
-#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40
+ u32 qfmt : 8;
+ u32 pfmt : 8;
+ u32 : 8;
+ u32 ac : 8;
+ u32 : 8;
+ u32 iqdcnt : 8;
+ u32 : 8;
+ u32 oqdcnt : 8;
+ u32 : 8;
+ u32 iqdsz : 8;
+ u32 : 8;
+ u32 oqdsz : 8;
+ /* private: */
+ u32 res[9];
+ /* public: */
+ u64 qiba;
+ u32 : 32;
+ u32 qkey : 4;
+ u32 : 28;
+ struct qdesfmt0 qdf0[126];
+} __attribute__ ((packed, aligned(4096)));
+
+#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40
#define QIB_RFLAGS_ENABLE_QEBSM 0x80
+/**
+ * struct qib - queue information block (QIB)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @rflags: QEBSM
+ * @ac: adapter characteristics
+ * @isliba: absolute address of first input SLIB
+ * @osliba: absolute address of first output SLIB
+ * @ebcnam: adapter identifier in EBCDIC
+ * @parm: implementation dependent parameters
+ */
struct qib {
- unsigned int qfmt : 8; /* queue format */
- unsigned int pfmt : 8; /* impl. dep. parameter format */
- unsigned int rflags : 8; /* QEBSM */
- unsigned int ac : 8; /* adapter characteristics */
- unsigned int res2; /* reserved */
-#ifdef QDIO_32_BIT
- unsigned long res3; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long isliba; /* absolute address of 1st
- input SLIB */
-#ifdef QDIO_32_BIT
- unsigned long res4; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long osliba; /* absolute address of 1st
- output SLIB */
- unsigned int res5; /* reserved */
- unsigned int res6; /* reserved */
- unsigned char ebcnam[8]; /* adapter identifier in EBCDIC */
- unsigned char res7[88]; /* reserved */
- unsigned char parm[QDIO_MAX_BUFFERS_PER_Q];
- /* implementation dependent
- parameters */
-} __attribute__ ((packed,aligned(256)));
-
-
-/*
- * storage-list-information block element (SLIBE)
+ u32 qfmt : 8;
+ u32 pfmt : 8;
+ u32 rflags : 8;
+ u32 ac : 8;
+ u32 : 32;
+ u64 isliba;
+ u64 osliba;
+ u32 : 32;
+ u32 : 32;
+ u8 ebcnam[8];
+ /* private: */
+ u8 res[88];
+ /* public: */
+ u8 parm[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+/**
+ * struct slibe - storage list information block element (SLIBE)
+ * @parms: implementation dependent parameters
*/
struct slibe {
-#ifdef QDIO_32_BIT
- unsigned long res; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long parms; /* implementation dependent
- parameters */
+ u64 parms;
};
-/*
- * storage-list-information block (SLIB)
+/**
+ * struct slib - storage list information block (SLIB)
+ * @nsliba: next SLIB address (if any)
+ * @sla: SL address
+ * @slsba: SLSB address
+ * @slibe: SLIB elements
*/
struct slib {
-#ifdef QDIO_32_BIT
- unsigned long res1; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long nsliba; /* next SLIB address (if any) */
-#ifdef QDIO_32_BIT
- unsigned long res2; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long sla; /* SL address */
-#ifdef QDIO_32_BIT
- unsigned long res3; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long slsba; /* SLSB address */
- unsigned char res4[1000]; /* reserved */
- struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q]; /* SLIB elements */
-} __attribute__ ((packed,aligned(2048)));
-
+ u64 nsliba;
+ u64 sla;
+ u64 slsba;
+ /* private: */
+ u8 res[1000];
+ /* public: */
+ struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(2048)));
+
+/**
+ * struct sbal_flags - storage block address list flags
+ * @last: last entry
+ * @cont: contiguous storage
+ * @frag: fragmentation
+ */
struct sbal_flags {
- unsigned char res1 : 1; /* reserved */
- unsigned char last : 1; /* last entry */
- unsigned char cont : 1; /* contiguous storage */
- unsigned char res2 : 1; /* reserved */
- unsigned char frag : 2; /* fragmentation (s.below) */
- unsigned char res3 : 2; /* reserved */
+ u8 : 1;
+ u8 last : 1;
+ u8 cont : 1;
+ u8 : 1;
+ u8 frag : 2;
+ u8 : 2;
} __attribute__ ((packed));
-#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL
-#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL
-#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL
-#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL
-#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL
+#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL
+#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL
+#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL
+#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL
+#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL
-#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
+#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
/* Awesome OpenFCP extensions */
-#define SBAL_FLAGS0_TYPE_STATUS 0x00UL
-#define SBAL_FLAGS0_TYPE_WRITE 0x08UL
-#define SBAL_FLAGS0_TYPE_READ 0x10UL
-#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL
-#define SBAL_FLAGS0_MORE_SBALS 0x04UL
-#define SBAL_FLAGS0_COMMAND 0x02UL
-#define SBAL_FLAGS0_LAST_SBAL 0x00UL
-#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS
-#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
-/* Naught of interest beyond this point */
-
-#define SBAL_FLAGS0_PCI 0x40
+#define SBAL_FLAGS0_TYPE_STATUS 0x00UL
+#define SBAL_FLAGS0_TYPE_WRITE 0x08UL
+#define SBAL_FLAGS0_TYPE_READ 0x10UL
+#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL
+#define SBAL_FLAGS0_MORE_SBALS 0x04UL
+#define SBAL_FLAGS0_COMMAND 0x02UL
+#define SBAL_FLAGS0_LAST_SBAL 0x00UL
+#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS
+#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_PCI 0x40
+
+/**
+ * struct sbal_sbalf_0 - sbal flags for sbale 0
+ * @pci: PCI indicator
+ * @cont: data continuation
+ * @sbtype: storage-block type (FCP)
+ */
struct sbal_sbalf_0 {
- unsigned char res1 : 1; /* reserved */
- unsigned char pci : 1; /* PCI indicator */
- unsigned char cont : 1; /* data continuation */
- unsigned char sbtype: 2; /* storage-block type (OpenFCP) */
- unsigned char res2 : 3; /* reserved */
+ u8 : 1;
+ u8 pci : 1;
+ u8 cont : 1;
+ u8 sbtype : 2;
+ u8 : 3;
} __attribute__ ((packed));
+/**
+ * struct sbal_sbalf_1 - sbal flags for sbale 1
+ * @key: storage key
+ */
struct sbal_sbalf_1 {
- unsigned char res1 : 4; /* reserved */
- unsigned char key : 4; /* storage key */
+ u8 : 4;
+ u8 key : 4;
} __attribute__ ((packed));
+/**
+ * struct sbal_sbalf_14 - sbal flags for sbale 14
+ * @erridx: error index
+ */
struct sbal_sbalf_14 {
- unsigned char res1 : 4; /* reserved */
- unsigned char erridx : 4; /* error index */
+ u8 : 4;
+ u8 erridx : 4;
} __attribute__ ((packed));
+/**
+ * struct sbal_sbalf_15 - sbal flags for sbale 15
+ * @reason: reason for error state
+ */
struct sbal_sbalf_15 {
- unsigned char reason; /* reserved */
+ u8 reason;
} __attribute__ ((packed));
+/**
+ * union sbal_sbalf - storage block address list flags
+ * @i0: sbalf0
+ * @i1: sbalf1
+ * @i14: sbalf14
+ * @i15: sblaf15
+ * @value: raw value
+ */
union sbal_sbalf {
struct sbal_sbalf_0 i0;
struct sbal_sbalf_1 i1;
struct sbal_sbalf_14 i14;
struct sbal_sbalf_15 i15;
- unsigned char value;
+ u8 value;
};
-struct sbal_element {
- union {
- struct sbal_flags bits; /* flags */
- unsigned char value;
- } flags;
- unsigned int res1 : 16; /* reserved */
- union sbal_sbalf sbalf; /* SBAL flags */
- unsigned int res2 : 16; /* reserved */
- unsigned int count : 16; /* data count */
-#ifdef QDIO_32_BIT
- unsigned long res3; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long addr; /* absolute data address */
-} __attribute__ ((packed,aligned(16)));
+/**
+ * struct qdio_buffer_element - SBAL entry
+ * @flags: flags
+ * @length: length
+ * @addr: address
+*/
+struct qdio_buffer_element {
+ u32 flags;
+ u32 length;
+#ifdef CONFIG_32BIT
+ /* private: */
+ void *reserved;
+ /* public: */
+#endif
+ void *addr;
+} __attribute__ ((packed, aligned(16)));
-/*
- * strorage-block access-list (SBAL)
+/**
+ * struct qdio_buffer - storage block address list (SBAL)
+ * @element: SBAL entries
*/
-struct sbal {
- struct sbal_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
-} __attribute__ ((packed,aligned(256)));
+struct qdio_buffer {
+ struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
+} __attribute__ ((packed, aligned(256)));
-/*
- * storage-list (SL)
+/**
+ * struct sl_element - storage list entry
+ * @sbal: absolute SBAL address
*/
struct sl_element {
-#ifdef QDIO_32_BIT
- unsigned long res; /* reserved */
-#endif /* QDIO_32_BIT */
- unsigned long sbal; /* absolute SBAL address */
+#ifdef CONFIG_32BIT
+ /* private: */
+ unsigned long reserved;
+ /* public: */
+#endif
+ unsigned long sbal;
} __attribute__ ((packed));
+/**
+ * struct sl - storage list (SL)
+ * @element: SL entries
+ */
struct sl {
struct sl_element element[QDIO_MAX_BUFFERS_PER_Q];
-} __attribute__ ((packed,aligned(1024)));
+} __attribute__ ((packed, aligned(1024)));
-/*
- * storage-list-state block (SLSB)
+/**
+ * struct slsb - storage list state block (SLSB)
+ * @val: state per buffer
*/
-struct slsb_flags {
- unsigned char owner : 2; /* SBAL owner */
- unsigned char type : 1; /* buffer type */
- unsigned char state : 5; /* processing state */
+struct slsb {
+ u8 val[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+struct qdio_ssqd_desc {
+ u8 flags;
+ u8:8;
+ u16 sch;
+ u8 qfmt;
+ u8 parm;
+ u8 qdioac1;
+ u8 sch_class;
+ u8 pcnt;
+ u8 icnt;
+ u8:8;
+ u8 ocnt;
+ u8:8;
+ u8 mbccnt;
+ u16 qdioac2;
+ u64 sch_token;
+ u64:64;
} __attribute__ ((packed));
+/* params are: ccw_device, qdio_error, queue_number,
+ first element processed, number of elements processed, int_parm */
+typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
+ int, int, unsigned long);
-struct slsb {
- union {
- unsigned char val[QDIO_MAX_BUFFERS_PER_Q];
- struct slsb_flags flags[QDIO_MAX_BUFFERS_PER_Q];
- } acc;
-} __attribute__ ((packed,aligned(256)));
+/* qdio errors reported to the upper-layer program */
+#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION 0x10
+#define QDIO_ERROR_SIGA_BUSY 0x20
+#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION 0x40
+#define QDIO_ERROR_SLSB_STATE 0x80
-/*
- * SLSB values
+/* for qdio_initialize */
+#define QDIO_INBOUND_0COPY_SBALS 0x01
+#define QDIO_OUTBOUND_0COPY_SBALS 0x02
+#define QDIO_USE_OUTBOUND_PCIS 0x04
+
+/* for qdio_cleanup */
+#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01
+#define QDIO_FLAG_CLEANUP_USING_HALT 0x02
+
+/**
+ * struct qdio_initialize - qdio initalization data
+ * @cdev: associated ccw device
+ * @q_format: queue format
+ * @adapter_name: name for the adapter
+ * @qib_param_field_format: format for qib_parm_field
+ * @qib_param_field: pointer to 128 bytes or NULL, if no param field
+ * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL
+ * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL
+ * @no_input_qs: number of input queues
+ * @no_output_qs: number of output queues
+ * @input_handler: handler to be called for input queues
+ * @output_handler: handler to be called for output queues
+ * @int_parm: interruption parameter
+ * @flags: initialization flags
+ * @input_sbal_addr_array: address of no_input_qs * 128 pointers
+ * @output_sbal_addr_array: address of no_output_qs * 128 pointers
*/
-#define SLSB_OWNER_PROG 1
-#define SLSB_OWNER_CU 2
-
-#define SLSB_TYPE_INPUT 0
-#define SLSB_TYPE_OUTPUT 1
-
-#define SLSB_STATE_NOT_INIT 0
-#define SLSB_STATE_EMPTY 1
-#define SLSB_STATE_PRIMED 2
-#define SLSB_STATE_HALTED 0xe
-#define SLSB_STATE_ERROR 0xf
-
-#define SLSB_P_INPUT_NOT_INIT 0x80
-#define SLSB_P_INPUT_PROCESSING 0x81
-#define SLSB_CU_INPUT_EMPTY 0x41
-#define SLSB_P_INPUT_PRIMED 0x82
-#define SLSB_P_INPUT_HALTED 0x8E
-#define SLSB_P_INPUT_ERROR 0x8F
-
-#define SLSB_P_OUTPUT_NOT_INIT 0xA0
-#define SLSB_P_OUTPUT_EMPTY 0xA1
-#define SLSB_CU_OUTPUT_PRIMED 0x62
-#define SLSB_P_OUTPUT_HALTED 0xAE
-#define SLSB_P_OUTPUT_ERROR 0xAF
-
-#define SLSB_ERROR_DURING_LOOKUP 0xFF
+struct qdio_initialize {
+ struct ccw_device *cdev;
+ unsigned char q_format;
+ unsigned char adapter_name[8];
+ unsigned int qib_param_field_format;
+ unsigned char *qib_param_field;
+ unsigned long *input_slib_elements;
+ unsigned long *output_slib_elements;
+ unsigned int no_input_qs;
+ unsigned int no_output_qs;
+ qdio_handler_t *input_handler;
+ qdio_handler_t *output_handler;
+ unsigned long int_parm;
+ unsigned long flags;
+ void **input_sbal_addr_array;
+ void **output_sbal_addr_array;
+};
+
+#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */
+#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_establish */
+#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */
+#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */
+
+#define QDIO_FLAG_SYNC_INPUT 0x01
+#define QDIO_FLAG_SYNC_OUTPUT 0x02
+#define QDIO_FLAG_PCI_OUT 0x10
+
+extern int qdio_initialize(struct qdio_initialize *init_data);
+extern int qdio_allocate(struct qdio_initialize *init_data);
+extern int qdio_establish(struct qdio_initialize *init_data);
+extern int qdio_activate(struct ccw_device *);
+
+extern int do_QDIO(struct ccw_device*, unsigned int flags,
+ int q_nr, int qidx, int count);
+extern int qdio_cleanup(struct ccw_device*, int how);
+extern int qdio_shutdown(struct ccw_device*, int how);
+extern int qdio_free(struct ccw_device *);
+extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev);
#endif /* __QDIO_H__ */
diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h
new file mode 100644
index 00000000000..7bdc0fe1569
--- /dev/null
+++ b/include/asm-s390/schid.h
@@ -0,0 +1,31 @@
+#ifndef ASM_SCHID_H
+#define ASM_SCHID_H
+
+struct subchannel_id {
+ __u32 cssid : 8;
+ __u32 : 4;
+ __u32 m : 1;
+ __u32 ssid : 2;
+ __u32 one : 1;
+ __u32 sch_no : 16;
+} __attribute__ ((packed, aligned(4)));
+
+#ifdef __KERNEL__
+
+/* Helper function for sane state of pre-allocated subchannel_id. */
+static inline void
+init_subchannel_id(struct subchannel_id *schid)
+{
+ memset(schid, 0, sizeof(struct subchannel_id));
+ schid->one = 1;
+}
+
+static inline int
+schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2)
+{
+ return !memcmp(schid1, schid2, sizeof(struct subchannel_id));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* ASM_SCHID_H */
diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h
index b5f2843013a..fed7bee650a 100644
--- a/include/asm-s390/sclp.h
+++ b/include/asm-s390/sclp.h
@@ -45,9 +45,9 @@ struct sclp_cpu_info {
int sclp_get_cpu_info(struct sclp_cpu_info *info);
int sclp_cpu_configure(u8 cpu);
int sclp_cpu_deconfigure(u8 cpu);
-void sclp_read_info_early(void);
void sclp_facilities_detect(void);
-unsigned long long sclp_memory_detect(void);
+unsigned long long sclp_get_rnmax(void);
+unsigned long long sclp_get_rzm(void);
int sclp_sdias_blk_count(void);
int sclp_sdias_copy(void *dest, int blk_num, int nr_blks);
int sclp_chp_configure(struct chp_id chpid);
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index ba69674012a..4ba14e463e8 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -8,14 +8,16 @@
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
-#define COMMAND_LINE_SIZE 896
+#define COMMAND_LINE_SIZE 1024
+
+#define ARCH_COMMAND_LINE_SIZE 896
#ifdef __KERNEL__
#include <asm/types.h>
#define PARMAREA 0x10400
-#define MEMORY_CHUNKS 16 /* max 0x7fff */
+#define MEMORY_CHUNKS 256
#ifndef __ASSEMBLY__
@@ -36,12 +38,14 @@
struct mem_chunk {
unsigned long addr;
unsigned long size;
- unsigned long type;
+ int type;
};
extern struct mem_chunk memory_chunk[];
extern unsigned long real_memory_size;
+void detect_memory_layout(struct mem_chunk chunk[]);
+
#ifdef CONFIG_S390_SWITCH_AMODE
extern unsigned int switch_amode;
#else
@@ -74,7 +78,6 @@ extern unsigned long machine_flags;
#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_IS_P390 (machine_flags & MACHINE_FLAG_P390)
#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C)
#ifndef __s390x__
@@ -97,7 +100,6 @@ extern unsigned long machine_flags;
#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF)
#endif /* __s390x__ */
-#define MACHINE_HAS_SCLP (!MACHINE_IS_P390)
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
/*
diff --git a/include/asm-s390/sparsemem.h b/include/asm-s390/sparsemem.h
index 06dfdab6c0e..545d219e6a2 100644
--- a/include/asm-s390/sparsemem.h
+++ b/include/asm-s390/sparsemem.h
@@ -1,15 +1,15 @@
#ifndef _ASM_S390_SPARSEMEM_H
#define _ASM_S390_SPARSEMEM_H
-#define SECTION_SIZE_BITS 25
-
#ifdef CONFIG_64BIT
+#define SECTION_SIZE_BITS 28
#define MAX_PHYSADDR_BITS 42
#define MAX_PHYSMEM_BITS 42
#else
+#define SECTION_SIZE_BITS 25
#define MAX_PHYSADDR_BITS 31
#define MAX_PHYSMEM_BITS 31
diff --git a/include/asm-s390/timer.h b/include/asm-s390/timer.h
index adb34860a54..d98d79e35cd 100644
--- a/include/asm-s390/timer.h
+++ b/include/asm-s390/timer.h
@@ -48,6 +48,18 @@ extern int del_virt_timer(struct vtimer_list *timer);
extern void init_cpu_vtimer(void);
extern void vtime_init(void);
+#ifdef CONFIG_VIRT_TIMER
+
+extern void vtime_start_cpu_timer(void);
+extern void vtime_stop_cpu_timer(void);
+
+#else
+
+static inline void vtime_start_cpu_timer(void) { }
+static inline void vtime_stop_cpu_timer(void) { }
+
+#endif /* CONFIG_VIRT_TIMER */
+
#endif /* __KERNEL__ */
#endif /* _ASM_S390_TIMER_H */
diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h
index f228f1b8687..00d3bbd4411 100644
--- a/include/asm-s390/zcrypt.h
+++ b/include/asm-s390/zcrypt.h
@@ -29,7 +29,7 @@
#define ZCRYPT_VERSION 2
#define ZCRYPT_RELEASE 1
-#define ZCRYPT_VARIANT 0
+#define ZCRYPT_VARIANT 1
#include <linux/ioctl.h>
#include <linux/compiler.h>
diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h
index 9c8d34b07eb..593343cd26e 100644
--- a/include/asm-sh/smp.h
+++ b/include/asm-sh/smp.h
@@ -26,18 +26,10 @@ extern int __cpu_logical_map[NR_CPUS];
#define NO_PROC_ID (-1)
-struct smp_fn_call_struct {
- spinlock_t lock;
- atomic_t finished;
- void (*fn)(void *);
- void *data;
-};
-
-extern struct smp_fn_call_struct smp_fn_call;
-
#define SMP_MSG_FUNCTION 0
#define SMP_MSG_RESCHEDULE 1
-#define SMP_MSG_NR 2
+#define SMP_MSG_FUNCTION_SINGLE 2
+#define SMP_MSG_NR 3
void plat_smp_setup(void);
void plat_prepare_cpus(unsigned int max_cpus);
@@ -46,6 +38,8 @@ void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
void plat_send_ipi(unsigned int cpu, unsigned int message);
int plat_register_ipi_handler(unsigned int message,
void (*handler)(void *), void *arg);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
#else
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
index e6d56159972..b61e74bea06 100644
--- a/include/asm-sparc/smp.h
+++ b/include/asm-sparc/smp.h
@@ -72,7 +72,7 @@ static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
unsigned long arg3, unsigned long arg4, unsigned long arg5)
{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
-static inline int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait)
+static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
{
xc1((smpfunc_t)func, (unsigned long)info);
return 0;
diff --git a/include/asm-sparc64/ftrace.h b/include/asm-sparc64/ftrace.h
new file mode 100644
index 00000000000..d27716cd38c
--- /dev/null
+++ b/include/asm-sparc64/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC64_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_MCOUNT
+#define MCOUNT_ADDR ((long)(_mcount))
+#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_SPARC64_FTRACE */
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 14411c9de46..635d764dc13 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -28,6 +28,7 @@
#include <asm/numa.h>
#include <asm/processor.h>
#include <asm/mmu.h>
+#include <asm/mpspec.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
@@ -160,9 +161,7 @@ struct bootnode;
#ifdef CONFIG_ACPI_NUMA
extern int acpi_numa;
extern int acpi_scan_nodes(unsigned long start, unsigned long end);
-#ifdef CONFIG_X86_64
-# define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
-#endif
+#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
int num_nodes);
#else
diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h
index 1f6a9ca1012..f6aa18eadf7 100644
--- a/include/asm-x86/alternative.h
+++ b/include/asm-x86/alternative.h
@@ -72,6 +72,8 @@ static inline void alternatives_smp_module_del(struct module *mod) {}
static inline void alternatives_smp_switch(int smp) {}
#endif /* CONFIG_SMP */
+const unsigned char *const *find_nop_table(void);
+
/*
* Alternative instructions for different CPU types or capabilities.
*
diff --git a/include/asm-x86/amd_iommu.h b/include/asm-x86/amd_iommu.h
new file mode 100644
index 00000000000..30a12049353
--- /dev/null
+++ b/include/asm-x86/amd_iommu.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ * Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_H
+#define _ASM_X86_AMD_IOMMU_H
+
+#ifdef CONFIG_AMD_IOMMU
+extern int amd_iommu_init(void);
+extern int amd_iommu_init_dma_ops(void);
+extern void amd_iommu_detect(void);
+#else
+static inline int amd_iommu_init(void) { return -ENODEV; }
+static inline void amd_iommu_detect(void) { }
+#endif
+
+#endif
diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h
new file mode 100644
index 00000000000..7bfcb47cc45
--- /dev/null
+++ b/include/asm-x86/amd_iommu_types.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ * Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __AMD_IOMMU_TYPES_H__
+#define __AMD_IOMMU_TYPES_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * some size calculation constants
+ */
+#define DEV_TABLE_ENTRY_SIZE 256
+#define ALIAS_TABLE_ENTRY_SIZE 2
+#define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *))
+
+/* helper macros */
+#define LOW_U32(x) ((x) & ((1ULL << 32)-1))
+#define HIGH_U32(x) (LOW_U32((x) >> 32))
+
+/* Length of the MMIO region for the AMD IOMMU */
+#define MMIO_REGION_LENGTH 0x4000
+
+/* Capability offsets used by the driver */
+#define MMIO_CAP_HDR_OFFSET 0x00
+#define MMIO_RANGE_OFFSET 0x0c
+
+/* Masks, shifts and macros to parse the device range capability */
+#define MMIO_RANGE_LD_MASK 0xff000000
+#define MMIO_RANGE_FD_MASK 0x00ff0000
+#define MMIO_RANGE_BUS_MASK 0x0000ff00
+#define MMIO_RANGE_LD_SHIFT 24
+#define MMIO_RANGE_FD_SHIFT 16
+#define MMIO_RANGE_BUS_SHIFT 8
+#define MMIO_GET_LD(x) (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
+#define MMIO_GET_FD(x) (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
+#define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
+
+/* Flag masks for the AMD IOMMU exclusion range */
+#define MMIO_EXCL_ENABLE_MASK 0x01ULL
+#define MMIO_EXCL_ALLOW_MASK 0x02ULL
+
+/* Used offsets into the MMIO space */
+#define MMIO_DEV_TABLE_OFFSET 0x0000
+#define MMIO_CMD_BUF_OFFSET 0x0008
+#define MMIO_EVT_BUF_OFFSET 0x0010
+#define MMIO_CONTROL_OFFSET 0x0018
+#define MMIO_EXCL_BASE_OFFSET 0x0020
+#define MMIO_EXCL_LIMIT_OFFSET 0x0028
+#define MMIO_CMD_HEAD_OFFSET 0x2000
+#define MMIO_CMD_TAIL_OFFSET 0x2008
+#define MMIO_EVT_HEAD_OFFSET 0x2010
+#define MMIO_EVT_TAIL_OFFSET 0x2018
+#define MMIO_STATUS_OFFSET 0x2020
+
+/* feature control bits */
+#define CONTROL_IOMMU_EN 0x00ULL
+#define CONTROL_HT_TUN_EN 0x01ULL
+#define CONTROL_EVT_LOG_EN 0x02ULL
+#define CONTROL_EVT_INT_EN 0x03ULL
+#define CONTROL_COMWAIT_EN 0x04ULL
+#define CONTROL_PASSPW_EN 0x08ULL
+#define CONTROL_RESPASSPW_EN 0x09ULL
+#define CONTROL_COHERENT_EN 0x0aULL
+#define CONTROL_ISOC_EN 0x0bULL
+#define CONTROL_CMDBUF_EN 0x0cULL
+#define CONTROL_PPFLOG_EN 0x0dULL
+#define CONTROL_PPFINT_EN 0x0eULL
+
+/* command specific defines */
+#define CMD_COMPL_WAIT 0x01
+#define CMD_INV_DEV_ENTRY 0x02
+#define CMD_INV_IOMMU_PAGES 0x03
+
+#define CMD_COMPL_WAIT_STORE_MASK 0x01
+#define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01
+#define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02
+
+#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS 0x7fffffffffffffffULL
+
+/* macros and definitions for device table entries */
+#define DEV_ENTRY_VALID 0x00
+#define DEV_ENTRY_TRANSLATION 0x01
+#define DEV_ENTRY_IR 0x3d
+#define DEV_ENTRY_IW 0x3e
+#define DEV_ENTRY_EX 0x67
+#define DEV_ENTRY_SYSMGT1 0x68
+#define DEV_ENTRY_SYSMGT2 0x69
+#define DEV_ENTRY_INIT_PASS 0xb8
+#define DEV_ENTRY_EINT_PASS 0xb9
+#define DEV_ENTRY_NMI_PASS 0xba
+#define DEV_ENTRY_LINT0_PASS 0xbe
+#define DEV_ENTRY_LINT1_PASS 0xbf
+
+/* constants to configure the command buffer */
+#define CMD_BUFFER_SIZE 8192
+#define CMD_BUFFER_ENTRIES 512
+#define MMIO_CMD_SIZE_SHIFT 56
+#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
+
+#define PAGE_MODE_1_LEVEL 0x01
+#define PAGE_MODE_2_LEVEL 0x02
+#define PAGE_MODE_3_LEVEL 0x03
+
+#define IOMMU_PDE_NL_0 0x000ULL
+#define IOMMU_PDE_NL_1 0x200ULL
+#define IOMMU_PDE_NL_2 0x400ULL
+#define IOMMU_PDE_NL_3 0x600ULL
+
+#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
+#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
+#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
+
+#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
+#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
+#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
+
+#define IOMMU_PTE_P (1ULL << 0)
+#define IOMMU_PTE_U (1ULL << 59)
+#define IOMMU_PTE_FC (1ULL << 60)
+#define IOMMU_PTE_IR (1ULL << 61)
+#define IOMMU_PTE_IW (1ULL << 62)
+
+#define IOMMU_L1_PDE(address) \
+ ((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define IOMMU_L2_PDE(address) \
+ ((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+
+#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
+#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
+#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
+#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
+
+#define IOMMU_PROT_MASK 0x03
+#define IOMMU_PROT_IR 0x01
+#define IOMMU_PROT_IW 0x02
+
+/* IOMMU capabilities */
+#define IOMMU_CAP_IOTLB 24
+#define IOMMU_CAP_NPCACHE 26
+
+#define MAX_DOMAIN_ID 65536
+
+struct protection_domain {
+ spinlock_t lock;
+ u16 id;
+ int mode;
+ u64 *pt_root;
+ void *priv;
+};
+
+struct dma_ops_domain {
+ struct list_head list;
+ struct protection_domain domain;
+ unsigned long aperture_size;
+ unsigned long next_bit;
+ unsigned long *bitmap;
+ u64 **pte_pages;
+};
+
+struct amd_iommu {
+ struct list_head list;
+ spinlock_t lock;
+
+ u16 devid;
+ u16 cap_ptr;
+
+ u64 mmio_phys;
+ u8 *mmio_base;
+ u32 cap;
+ u16 first_device;
+ u16 last_device;
+ u64 exclusion_start;
+ u64 exclusion_length;
+
+ u8 *cmd_buf;
+ u32 cmd_buf_size;
+
+ int need_sync;
+
+ struct dma_ops_domain *default_dom;
+};
+
+extern struct list_head amd_iommu_list;
+
+struct dev_table_entry {
+ u32 data[8];
+};
+
+struct unity_map_entry {
+ struct list_head list;
+ u16 devid_start;
+ u16 devid_end;
+ u64 address_start;
+ u64 address_end;
+ int prot;
+};
+
+extern struct list_head amd_iommu_unity_map;
+
+/* data structures for device handling */
+extern struct dev_table_entry *amd_iommu_dev_table;
+extern u16 *amd_iommu_alias_table;
+extern struct amd_iommu **amd_iommu_rlookup_table;
+
+extern unsigned amd_iommu_aperture_order;
+
+extern u16 amd_iommu_last_bdf;
+
+/* data structures for protection domain handling */
+extern struct protection_domain **amd_iommu_pd_table;
+extern unsigned long *amd_iommu_pd_alloc_bitmap;
+
+extern int amd_iommu_isolate;
+
+static inline void print_devid(u16 devid, int nl)
+{
+ int bus = devid >> 8;
+ int dev = devid >> 3 & 0x1f;
+ int fn = devid & 0x07;
+
+ printk("%02x:%02x.%x", bus, dev, fn);
+ if (nl)
+ printk("\n");
+}
+
+#endif
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index be9639a9a18..4e2c1e517f0 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -36,15 +36,11 @@ extern void generic_apic_probe(void);
#ifdef CONFIG_X86_LOCAL_APIC
extern int apic_verbosity;
-extern int timer_over_8254;
extern int local_apic_timer_c2_ok;
-extern int local_apic_timer_disabled;
-extern int apic_runs_main_timer;
extern int ioapic_force;
-extern int disable_apic;
-extern int disable_apic_timer;
+extern int disable_apic;
/*
* Basic functions accessing APICs.
*/
@@ -125,16 +121,22 @@ extern void enable_NMI_through_LVT0(void);
*/
#ifdef CONFIG_X86_64
extern void early_init_lapic_mapping(void);
+extern int apic_is_clustered_box(void);
+#else
+static inline int apic_is_clustered_box(void)
+{
+ return 0;
+}
#endif
extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
extern u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask);
-extern int apic_is_clustered_box(void);
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
#define local_apic_timer_c2_ok 1
+static inline void init_apic_mappings(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
index 90dec0c2364..97220321f39 100644
--- a/include/asm-x86/asm.h
+++ b/include/asm-x86/asm.h
@@ -1,37 +1,40 @@
#ifndef _ASM_X86_ASM_H
#define _ASM_X86_ASM_H
-#ifdef CONFIG_X86_32
-/* 32 bits */
-
-# define _ASM_PTR " .long "
-# define _ASM_ALIGN " .balign 4 "
-# define _ASM_MOV_UL " movl "
-
-# define _ASM_INC " incl "
-# define _ASM_DEC " decl "
-# define _ASM_ADD " addl "
-# define _ASM_SUB " subl "
-# define _ASM_XADD " xaddl "
-
+#ifdef __ASSEMBLY__
+# define __ASM_FORM(x) x
+# define __ASM_EX_SEC .section __ex_table
#else
-/* 64 bits */
+# define __ASM_FORM(x) " " #x " "
+# define __ASM_EX_SEC " .section __ex_table,\"a\"\n"
+#endif
-# define _ASM_PTR " .quad "
-# define _ASM_ALIGN " .balign 8 "
-# define _ASM_MOV_UL " movq "
-
-# define _ASM_INC " incq "
-# define _ASM_DEC " decq "
-# define _ASM_ADD " addq "
-# define _ASM_SUB " subq "
-# define _ASM_XADD " xaddq "
-
-#endif /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_32
+# define __ASM_SEL(a,b) __ASM_FORM(a)
+#else
+# define __ASM_SEL(a,b) __ASM_FORM(b)
+#endif
+
+#define __ASM_SIZE(inst) __ASM_SEL(inst##l, inst##q)
+#define __ASM_REG(reg) __ASM_SEL(e##reg, r##reg)
+
+#define _ASM_PTR __ASM_SEL(.long, .quad)
+#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8)
+#define _ASM_MOV_UL __ASM_SIZE(mov)
+
+#define _ASM_INC __ASM_SIZE(inc)
+#define _ASM_DEC __ASM_SIZE(dec)
+#define _ASM_ADD __ASM_SIZE(add)
+#define _ASM_SUB __ASM_SIZE(sub)
+#define _ASM_XADD __ASM_SIZE(xadd)
+#define _ASM_AX __ASM_REG(ax)
+#define _ASM_BX __ASM_REG(bx)
+#define _ASM_CX __ASM_REG(cx)
+#define _ASM_DX __ASM_REG(dx)
/* Exception table entry */
# define _ASM_EXTABLE(from,to) \
- " .section __ex_table,\"a\"\n" \
+ __ASM_EX_SEC \
_ASM_ALIGN "\n" \
_ASM_PTR #from "," #to "\n" \
" .previous\n"
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
index 3e0cd7d3833..a0095191c02 100644
--- a/include/asm-x86/atomic_64.h
+++ b/include/asm-x86/atomic_64.h
@@ -11,12 +11,6 @@
* resource counting etc..
*/
-#ifdef CONFIG_SMP
-#define LOCK "lock ; "
-#else
-#define LOCK ""
-#endif
-
/*
* Make sure gcc doesn't try to be clever and move things around
* on us. We need to use _exactly_ the address the user gave us,
@@ -431,6 +425,32 @@ static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
return c != (u);
}
+/**
+ * atomic_inc_short - increment of a short integer
+ * @v: pointer to type int
+ *
+ * Atomically adds 1 to @v
+ * Returns the new value of @u
+ */
+static inline short int atomic_inc_short(short int *v)
+{
+ asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
+ return *v;
+}
+
+/**
+ * atomic_or_long - OR of two long integers
+ * @v1: pointer to type unsigned long
+ * @v2: pointer to type unsigned long
+ *
+ * Atomically ORs @v1 and @v2
+ * Returns the result of the OR
+ */
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+ asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
+}
+
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
/* These are x86-specific, used by some header files */
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
index b4a46b7be79..0033e50c13b 100644
--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -14,4 +14,6 @@ static inline unsigned int get_bios_ebda(void)
return address; /* 0 means none */
}
+void reserve_ebda_region(void);
+
#endif /* _MACH_BIOS_EBDA_H */
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index ee4b3ead6a4..96b1829cea1 100644
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -23,11 +23,21 @@
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
/* Technically wrong, but this avoids compilation errors on some gcc
versions. */
-#define ADDR "=m" (*(volatile long *) addr)
+#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
#else
-#define ADDR "+m" (*(volatile long *) addr)
+#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
#endif
+#define ADDR BITOP_ADDR(addr)
+
+/*
+ * We do the locked ops that don't return the old value as
+ * a mask operation on a byte.
+ */
+#define IS_IMMEDIATE(nr) (__builtin_constant_p(nr))
+#define CONST_MASK_ADDR(nr, addr) BITOP_ADDR((void *)(addr) + ((nr)>>3))
+#define CONST_MASK(nr) (1 << ((nr) & 7))
+
/**
* set_bit - Atomically set a bit in memory
* @nr: the bit to set
@@ -43,9 +53,17 @@
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static inline void set_bit(int nr, volatile void *addr)
+static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
{
- asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory");
+ if (IS_IMMEDIATE(nr)) {
+ asm volatile(LOCK_PREFIX "orb %1,%0"
+ : CONST_MASK_ADDR(nr, addr)
+ : "iq" ((u8)CONST_MASK(nr))
+ : "memory");
+ } else {
+ asm volatile(LOCK_PREFIX "bts %1,%0"
+ : BITOP_ADDR(addr) : "Ir" (nr) : "memory");
+ }
}
/**
@@ -57,7 +75,7 @@ static inline void set_bit(int nr, volatile void *addr)
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static inline void __set_bit(int nr, volatile void *addr)
+static inline void __set_bit(int nr, volatile unsigned long *addr)
{
asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
}
@@ -72,9 +90,17 @@ static inline void __set_bit(int nr, volatile void *addr)
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
-static inline void clear_bit(int nr, volatile void *addr)
+static inline void clear_bit(int nr, volatile unsigned long *addr)
{
- asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr));
+ if (IS_IMMEDIATE(nr)) {
+ asm volatile(LOCK_PREFIX "andb %1,%0"
+ : CONST_MASK_ADDR(nr, addr)
+ : "iq" ((u8)~CONST_MASK(nr)));
+ } else {
+ asm volatile(LOCK_PREFIX "btr %1,%0"
+ : BITOP_ADDR(addr)
+ : "Ir" (nr));
+ }
}
/*
@@ -85,13 +111,13 @@ static inline void clear_bit(int nr, volatile void *addr)
* clear_bit() is atomic and implies release semantics before the memory
* operation. It can be used for an unlock.
*/
-static inline void clear_bit_unlock(unsigned nr, volatile void *addr)
+static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
{
barrier();
clear_bit(nr, addr);
}
-static inline void __clear_bit(int nr, volatile void *addr)
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
{
asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
}
@@ -108,7 +134,7 @@ static inline void __clear_bit(int nr, volatile void *addr)
* No memory barrier is required here, because x86 cannot reorder stores past
* older loads. Same principle as spin_unlock.
*/
-static inline void __clear_bit_unlock(unsigned nr, volatile void *addr)
+static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
{
barrier();
__clear_bit(nr, addr);
@@ -126,7 +152,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr)
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static inline void __change_bit(int nr, volatile void *addr)
+static inline void __change_bit(int nr, volatile unsigned long *addr)
{
asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
}
@@ -140,7 +166,7 @@ static inline void __change_bit(int nr, volatile void *addr)
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static inline void change_bit(int nr, volatile void *addr)
+static inline void change_bit(int nr, volatile unsigned long *addr)
{
asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
}
@@ -153,7 +179,7 @@ static inline void change_bit(int nr, volatile void *addr)
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int test_and_set_bit(int nr, volatile void *addr)
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -170,7 +196,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
*
* This is the same as test_and_set_bit on x86.
*/
-static inline int test_and_set_bit_lock(int nr, volatile void *addr)
+static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
{
return test_and_set_bit(nr, addr);
}
@@ -184,7 +210,7 @@ static inline int test_and_set_bit_lock(int nr, volatile void *addr)
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static inline int __test_and_set_bit(int nr, volatile void *addr)
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -203,7 +229,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr)
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int test_and_clear_bit(int nr, volatile void *addr)
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -223,7 +249,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static inline int __test_and_clear_bit(int nr, volatile void *addr)
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -235,7 +261,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr)
}
/* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr, volatile void *addr)
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -255,7 +281,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr)
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int test_and_change_bit(int nr, volatile void *addr)
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
@@ -266,13 +292,13 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
return oldbit;
}
-static inline int constant_test_bit(int nr, const volatile void *addr)
+static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
{
return ((1UL << (nr % BITS_PER_LONG)) &
(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
}
-static inline int variable_test_bit(int nr, volatile const void *addr)
+static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
{
int oldbit;
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
index f62f4733606..ae22bdf0ab1 100644
--- a/include/asm-x86/bootparam.h
+++ b/include/asm-x86/bootparam.h
@@ -11,6 +11,7 @@
/* setup data types */
#define SETUP_NONE 0
+#define SETUP_E820_EXT 1
/* extensible setup data list node */
struct setup_data {
@@ -40,6 +41,7 @@ struct setup_header {
__u8 type_of_loader;
__u8 loadflags;
#define LOADED_HIGH (1<<0)
+#define QUIET_FLAG (1<<5)
#define KEEP_SEGMENTS (1<<6)
#define CAN_USE_HEAP (1<<7)
__u16 setup_move_size;
diff --git a/include/asm-x86/cmpxchg_64.h b/include/asm-x86/cmpxchg_64.h
index d9b26b9a28c..17463ccf816 100644
--- a/include/asm-x86/cmpxchg_64.h
+++ b/include/asm-x86/cmpxchg_64.h
@@ -93,6 +93,39 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
return old;
}
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long prev;
+ switch (size) {
+ case 1:
+ asm volatile("lock; cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 2:
+ asm volatile("lock; cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 4:
+ asm volatile("lock; cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ }
+ return old;
+}
+
static inline unsigned long __cmpxchg_local(volatile void *ptr,
unsigned long old,
unsigned long new, int size)
@@ -139,6 +172,10 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 0d609c837a4..75ef959db32 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -74,8 +74,8 @@
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
-/* 14 free */
-/* 15 free */
+#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
@@ -106,6 +106,7 @@
/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
+#define X86_FEATURE_IBS (6*32+ 10) /* Instruction Based Sampling */
/*
* Auxiliary flags: Linux defined - For features scattered in various
@@ -142,11 +143,11 @@ extern const char * const x86_power_flags[32];
#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
#define setup_clear_cpu_cap(bit) do { \
clear_cpu_cap(&boot_cpu_data, bit); \
- set_bit(bit, cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, cleared_cpu_caps); \
+ clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h
index d2526d3f734..7515c19d498 100644
--- a/include/asm-x86/current.h
+++ b/include/asm-x86/current.h
@@ -1,5 +1,39 @@
+#ifndef _X86_CURRENT_H
+#define _X86_CURRENT_H
+
#ifdef CONFIG_X86_32
-# include "current_32.h"
-#else
-# include "current_64.h"
-#endif
+#include <linux/compiler.h>
+#include <asm/percpu.h>
+
+struct task_struct;
+
+DECLARE_PER_CPU(struct task_struct *, current_task);
+static __always_inline struct task_struct *get_current(void)
+{
+ return x86_read_percpu(current_task);
+}
+
+#else /* X86_32 */
+
+#ifndef __ASSEMBLY__
+#include <asm/pda.h>
+
+struct task_struct;
+
+static __always_inline struct task_struct *get_current(void)
+{
+ return read_pda(pcurrent);
+}
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* X86_32 */
+
+#define current get_current()
+
+#endif /* X86_CURRENT_H */
diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h
deleted file mode 100644
index 5af9bdb97a1..00000000000
--- a/include/asm-x86/current_32.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _I386_CURRENT_H
-#define _I386_CURRENT_H
-
-#include <linux/compiler.h>
-#include <asm/percpu.h>
-
-struct task_struct;
-
-DECLARE_PER_CPU(struct task_struct *, current_task);
-static __always_inline struct task_struct *get_current(void)
-{
- return x86_read_percpu(current_task);
-}
-
-#define current get_current()
-
-#endif /* !(_I386_CURRENT_H) */
diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h
deleted file mode 100644
index 2d368ede2fc..00000000000
--- a/include/asm-x86/current_64.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _X86_64_CURRENT_H
-#define _X86_64_CURRENT_H
-
-#if !defined(__ASSEMBLY__)
-struct task_struct;
-
-#include <asm/pda.h>
-
-static inline struct task_struct *get_current(void)
-{
- struct task_struct *t = read_pda(pcurrent);
- return t;
-}
-
-#define current get_current()
-
-#else
-
-#ifndef ASM_OFFSET_H
-#include <asm/asm-offsets.h>
-#endif
-
-#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
-
-#endif
-
-#endif /* !(_X86_64_CURRENT_H) */
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index 268a012bcd7..a44c4dc7059 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -29,11 +29,17 @@ static inline void fill_ldt(struct desc_struct *desc,
extern struct desc_ptr idt_descr;
extern gate_desc idt_table[];
+struct gdt_page {
+ struct desc_struct gdt[GDT_ENTRIES];
+} __attribute__((aligned(PAGE_SIZE)));
+DECLARE_PER_CPU(struct gdt_page, gdt_page);
+
+static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
+{
+ return per_cpu(gdt_page, cpu).gdt;
+}
+
#ifdef CONFIG_X86_64
-extern struct desc_struct cpu_gdt_table[GDT_ENTRIES];
-extern struct desc_ptr cpu_gdt_descr[];
-/* the cpu gdt accessor */
-#define get_cpu_gdt_table(x) ((struct desc_struct *)cpu_gdt_descr[x].address)
static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func,
unsigned dpl, unsigned ist, unsigned seg)
@@ -51,16 +57,6 @@ static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func,
}
#else
-struct gdt_page {
- struct desc_struct gdt[GDT_ENTRIES];
-} __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
-
-static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
-{
- return per_cpu(gdt_page, cpu).gdt;
-}
-
static inline void pack_gate(gate_desc *gate, unsigned char type,
unsigned long base, unsigned dpl, unsigned flags,
unsigned short seg)
@@ -192,8 +188,8 @@ static inline void native_set_ldt(const void *addr, unsigned int entries)
unsigned cpu = smp_processor_id();
ldt_desc ldt;
- set_tssldt_descriptor(&ldt, (unsigned long)addr,
- DESC_LDT, entries * sizeof(ldt) - 1);
+ set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT,
+ entries * LDT_ENTRY_SIZE - 1);
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
&ldt, DESC_LDT);
asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
@@ -311,6 +307,28 @@ static inline void set_intr_gate(unsigned int n, void *addr)
_set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS);
}
+#define SYS_VECTOR_FREE 0
+#define SYS_VECTOR_ALLOCED 1
+
+extern int first_system_vector;
+extern char system_vectors[];
+
+static inline void alloc_system_vector(int vector)
+{
+ if (system_vectors[vector] == SYS_VECTOR_FREE) {
+ system_vectors[vector] = SYS_VECTOR_ALLOCED;
+ if (first_system_vector > vector)
+ first_system_vector = vector;
+ } else
+ BUG();
+}
+
+static inline void alloc_intr_gate(unsigned int n, void *addr)
+{
+ alloc_system_vector(n);
+ set_intr_gate(n, addr);
+}
+
/*
* This routine sets up an interrupt gate at directory privilege level 3.
*/
diff --git a/include/asm-x86/desc_defs.h b/include/asm-x86/desc_defs.h
index eccb4ea1f91..f7bacf357da 100644
--- a/include/asm-x86/desc_defs.h
+++ b/include/asm-x86/desc_defs.h
@@ -75,10 +75,14 @@ struct ldttss_desc64 {
typedef struct gate_struct64 gate_desc;
typedef struct ldttss_desc64 ldt_desc;
typedef struct ldttss_desc64 tss_desc;
+#define gate_offset(g) ((g).offset_low | ((unsigned long)(g).offset_middle << 16) | ((unsigned long)(g).offset_high << 32))
+#define gate_segment(g) ((g).segment)
#else
typedef struct desc_struct gate_desc;
typedef struct desc_struct ldt_desc;
typedef struct desc_struct tss_desc;
+#define gate_offset(g) (((g).b & 0xffff0000) | ((g).a & 0x0000ffff))
+#define gate_segment(g) ((g).a >> 16)
#endif
struct desc_ptr {
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
index 4edf7514a75..58a86571fe0 100644
--- a/include/asm-x86/dmi.h
+++ b/include/asm-x86/dmi.h
@@ -3,12 +3,6 @@
#include <asm/io.h>
-#ifdef CONFIG_X86_32
-
-#define dmi_alloc alloc_bootmem
-
-#else /* CONFIG_X86_32 */
-
#define DMI_MAX_DATA 2048
extern int dmi_alloc_index;
@@ -25,8 +19,6 @@ static inline void *dmi_alloc(unsigned len)
return dmi_alloc_data + idx;
}
-#endif
-
/* Use early IO mappings for DMI because it's initialized early */
#define dmi_ioremap early_ioremap
#define dmi_iounmap early_iounmap
diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h
index b3cbb0ccae1..738bb9fb3e5 100644
--- a/include/asm-x86/dwarf2.h
+++ b/include/asm-x86/dwarf2.h
@@ -1,5 +1,61 @@
-#ifdef CONFIG_X86_32
-# include "dwarf2_32.h"
+#ifndef _DWARF2_H
+#define _DWARF2_H
+
+#ifndef __ASSEMBLY__
+#warning "asm/dwarf2.h should be only included in pure assembly files"
+#endif
+
+/*
+ Macros for dwarf2 CFI unwind table entries.
+ See "as.info" for details on these pseudo ops. Unfortunately
+ they are only supported in very new binutils, so define them
+ away for older version.
+ */
+
+#ifdef CONFIG_AS_CFI
+
+#define CFI_STARTPROC .cfi_startproc
+#define CFI_ENDPROC .cfi_endproc
+#define CFI_DEF_CFA .cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
+#define CFI_OFFSET .cfi_offset
+#define CFI_REL_OFFSET .cfi_rel_offset
+#define CFI_REGISTER .cfi_register
+#define CFI_RESTORE .cfi_restore
+#define CFI_REMEMBER_STATE .cfi_remember_state
+#define CFI_RESTORE_STATE .cfi_restore_state
+#define CFI_UNDEFINED .cfi_undefined
+
+#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#else
+#define CFI_SIGNAL_FRAME
+#endif
+
#else
-# include "dwarf2_64.h"
+
+/* Due to the structure of pre-exisiting code, don't use assembler line
+ comment character # to ignore the arguments. Instead, use a dummy macro. */
+.macro cfi_ignore a=0, b=0, c=0, d=0
+.endm
+
+#define CFI_STARTPROC cfi_ignore
+#define CFI_ENDPROC cfi_ignore
+#define CFI_DEF_CFA cfi_ignore
+#define CFI_DEF_CFA_REGISTER cfi_ignore
+#define CFI_DEF_CFA_OFFSET cfi_ignore
+#define CFI_ADJUST_CFA_OFFSET cfi_ignore
+#define CFI_OFFSET cfi_ignore
+#define CFI_REL_OFFSET cfi_ignore
+#define CFI_REGISTER cfi_ignore
+#define CFI_RESTORE cfi_ignore
+#define CFI_REMEMBER_STATE cfi_ignore
+#define CFI_RESTORE_STATE cfi_ignore
+#define CFI_UNDEFINED cfi_ignore
+#define CFI_SIGNAL_FRAME cfi_ignore
+
+#endif
+
#endif
diff --git a/include/asm-x86/dwarf2_32.h b/include/asm-x86/dwarf2_32.h
deleted file mode 100644
index 6d66398a307..00000000000
--- a/include/asm-x86/dwarf2_32.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _DWARF2_H
-#define _DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- Macros for dwarf2 CFI unwind table entries.
- See "as.info" for details on these pseudo ops. Unfortunately
- they are only supported in very new binutils, so define them
- away for older version.
- */
-
-#ifdef CONFIG_UNWIND_INFO
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#else
-
-/* Due to the structure of pre-exisiting code, don't use assembler line
- comment character # to ignore the arguments. Instead, use a dummy macro. */
-.macro ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC ignore
-#define CFI_ENDPROC ignore
-#define CFI_DEF_CFA ignore
-#define CFI_DEF_CFA_REGISTER ignore
-#define CFI_DEF_CFA_OFFSET ignore
-#define CFI_ADJUST_CFA_OFFSET ignore
-#define CFI_OFFSET ignore
-#define CFI_REL_OFFSET ignore
-#define CFI_REGISTER ignore
-#define CFI_RESTORE ignore
-#define CFI_REMEMBER_STATE ignore
-#define CFI_RESTORE_STATE ignore
-#define CFI_UNDEFINED ignore
-#define CFI_SIGNAL_FRAME ignore
-
-#endif
-
-#endif
diff --git a/include/asm-x86/dwarf2_64.h b/include/asm-x86/dwarf2_64.h
deleted file mode 100644
index c950519a264..00000000000
--- a/include/asm-x86/dwarf2_64.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _DWARF2_H
-#define _DWARF2_H 1
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- Macros for dwarf2 CFI unwind table entries.
- See "as.info" for details on these pseudo ops. Unfortunately
- they are only supported in very new binutils, so define them
- away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#else
-
-/* use assembler line comment character # to ignore the arguments. */
-#define CFI_STARTPROC #
-#define CFI_ENDPROC #
-#define CFI_DEF_CFA #
-#define CFI_DEF_CFA_REGISTER #
-#define CFI_DEF_CFA_OFFSET #
-#define CFI_ADJUST_CFA_OFFSET #
-#define CFI_OFFSET #
-#define CFI_REL_OFFSET #
-#define CFI_REGISTER #
-#define CFI_RESTORE #
-#define CFI_REMEMBER_STATE #
-#define CFI_RESTORE_STATE #
-#define CFI_UNDEFINED #
-#define CFI_SIGNAL_FRAME #
-
-#endif
-
-#endif
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
index 7004251fc66..06633b01dd5 100644
--- a/include/asm-x86/e820.h
+++ b/include/asm-x86/e820.h
@@ -2,6 +2,41 @@
#define __ASM_E820_H
#define E820MAP 0x2d0 /* our map */
#define E820MAX 128 /* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage. If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes. Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates. The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries. Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ * #if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifdef __KERNEL__
+#ifdef CONFIG_EFI
+#include <linux/numa.h>
+#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
+#else /* ! CONFIG_EFI */
+#define E820_X_MAX E820MAX
+#endif
+#else /* ! __KERNEL__ */
+#define E820_X_MAX E820MAX
+#endif
+
#define E820NR 0x1e8 /* # entries in E820MAP */
#define E820_RAM 1
@@ -9,6 +44,9 @@
#define E820_ACPI 3
#define E820_NVS 4
+/* reserved RAM used by kernel itself */
+#define E820_RESERVED_KERN 128
+
#ifndef __ASSEMBLY__
struct e820entry {
__u64 addr; /* start of memory segment */
@@ -18,22 +56,80 @@ struct e820entry {
struct e820map {
__u32 nr_map;
- struct e820entry map[E820MAX];
+ struct e820entry map[E820_X_MAX];
};
+
+#ifdef __KERNEL__
+/* see comment in arch/x86/kernel/e820.c */
+extern struct e820map e820;
+extern struct e820map e820_saved;
+
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void e820_add_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int
+sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map);
+extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
+ int checktype);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+ unsigned long start_addr, unsigned long long end_addr);
+struct setup_data;
+extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data);
+
+#if defined(CONFIG_X86_64) || \
+ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+extern void e820_mark_nosave_regions(unsigned long limit_pfn);
+#else
+static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+}
+#endif
+
+extern unsigned long end_user_pfn;
+
+extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
+extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
+extern void reserve_early(u64 start, u64 end, char *name);
+extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
+extern void free_early(u64 start, u64 end);
+extern void early_res_to_bootmem(u64 start, u64 end);
+extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+
+extern unsigned long e820_end_of_ram_pfn(void);
+extern unsigned long e820_end_of_low_ram_pfn(void);
+extern int e820_find_active_region(const struct e820entry *ei,
+ unsigned long start_pfn,
+ unsigned long last_pfn,
+ unsigned long *ei_startpfn,
+ unsigned long *ei_endpfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern u64 e820_hole_size(u64 start, u64 end);
+extern void finish_e820_parsing(void);
+extern void e820_reserve_resources(void);
+extern void setup_memory_map(void);
+extern char *default_machine_specific_memory_setup(void);
+extern char *machine_specific_memory_setup(void);
+extern char *memory_setup(void);
+#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#define ISA_START_ADDRESS 0xa0000
#define ISA_END_ADDRESS 0x100000
+#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
#ifdef __KERNEL__
-#ifdef CONFIG_X86_32
-# include "e820_32.h"
-#else
-# include "e820_64.h"
-#endif
+#include <linux/ioport.h>
+
+#define HIGH_MEMORY (1024*1024)
#endif /* __KERNEL__ */
#endif /* __ASM_E820_H */
diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h
deleted file mode 100644
index a9f7c6ec32b..00000000000
--- a/include/asm-x86/e820_32.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * structures and definitions for the int 15, ax=e820 memory map
- * scheme.
- *
- * In a nutshell, arch/i386/boot/setup.S populates a scratch table
- * in the empty_zero_block that contains a list of usable address/size
- * duples. In arch/i386/kernel/setup.c, this information is
- * transferred into the e820map, and in arch/i386/mm/init.c, that
- * new information is used to mark pages reserved or not.
- *
- */
-#ifndef __E820_HEADER
-#define __E820_HEADER
-
-#include <linux/ioport.h>
-
-#define HIGH_MEMORY (1024*1024)
-
-#ifndef __ASSEMBLY__
-
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_mapped(u64 start, u64 end, unsigned type);
-extern void propagate_e820_map(void);
-extern void register_bootmem_low_pages(unsigned long max_low_pfn);
-extern void add_memory_region(unsigned long long start,
- unsigned long long size, int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void e820_register_memory(void);
-extern void limit_regions(unsigned long long size);
-extern void print_memory_map(char *who);
-extern void init_iomem_resources(struct resource *code_resource,
- struct resource *data_resource,
- struct resource *bss_resource);
-
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-extern void e820_mark_nosave_regions(void);
-#else
-static inline void e820_mark_nosave_regions(void)
-{
-}
-#endif
-
-
-#endif/*!__ASSEMBLY__*/
-#endif/*__E820_HEADER*/
diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h
deleted file mode 100644
index 71c4d685d30..00000000000
--- a/include/asm-x86/e820_64.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * structures and definitions for the int 15, ax=e820 memory map
- * scheme.
- *
- * In a nutshell, setup.S populates a scratch table in the
- * empty_zero_block that contains a list of usable address/size
- * duples. setup.c, this information is transferred into the e820map,
- * and in init.c/numa.c, that new information is used to mark pages
- * reserved or not.
- */
-#ifndef __E820_HEADER
-#define __E820_HEADER
-
-#include <linux/ioport.h>
-
-#ifndef __ASSEMBLY__
-extern unsigned long find_e820_area(unsigned long start, unsigned long end,
- unsigned long size, unsigned long align);
-extern unsigned long find_e820_area_size(unsigned long start,
- unsigned long *sizep,
- unsigned long align);
-extern void add_memory_region(unsigned long start, unsigned long size,
- int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void setup_memory_region(void);
-extern void contig_e820_setup(void);
-extern unsigned long e820_end_of_ram(void);
-extern void e820_reserve_resources(void);
-extern void e820_mark_nosave_regions(void);
-extern int e820_any_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_non_reserved(unsigned long start, unsigned long end);
-extern int is_memory_any_valid(unsigned long start, unsigned long end);
-extern int e820_all_non_reserved(unsigned long start, unsigned long end);
-extern int is_memory_all_valid(unsigned long start, unsigned long end);
-extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
-
-extern void e820_setup_gap(void);
-extern void e820_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-
-extern void finish_e820_parsing(void);
-
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern void reserve_early(unsigned long start, unsigned long end, char *name);
-extern void free_early(unsigned long start, unsigned long end);
-extern void early_res_to_bootmem(unsigned long start, unsigned long end);
-
-#endif/*!__ASSEMBLY__*/
-
-#endif/*__E820_HEADER*/
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
index d53004b855c..7ed2bd7a7f5 100644
--- a/include/asm-x86/efi.h
+++ b/include/asm-x86/efi.h
@@ -90,7 +90,7 @@ extern void *efi_ioremap(unsigned long addr, unsigned long size);
#endif /* CONFIG_X86_32 */
-extern void efi_reserve_bootmem(void);
+extern void efi_reserve_early(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
index 8f232dc5b5f..7be4733c793 100644
--- a/include/asm-x86/elf.h
+++ b/include/asm-x86/elf.h
@@ -83,9 +83,9 @@ extern unsigned int vdso_enabled;
(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
#include <asm/processor.h>
+#include <asm/system.h>
#ifdef CONFIG_X86_32
-#include <asm/system.h> /* for savesegment */
#include <asm/desc.h>
#define elf_check_arch(x) elf_check_arch_ia32(x)
diff --git a/include/asm-x86/fixmap.h b/include/asm-x86/fixmap.h
index 5bd206973dc..44d4f821734 100644
--- a/include/asm-x86/fixmap.h
+++ b/include/asm-x86/fixmap.h
@@ -7,7 +7,62 @@
# include "fixmap_64.h"
#endif
+extern int fixmaps_set;
+
+void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
+void native_set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
+
+#ifndef CONFIG_PARAVIRT
+static inline void __set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags)
+{
+ native_set_fixmap(idx, phys, flags);
+}
+#endif
+
+#define set_fixmap(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL)
+
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
#define clear_fixmap(idx) \
__set_fixmap(idx, 0, __pgprot(0))
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * this branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ __this_fixmap_does_not_exist();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
#endif
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
index 4b96148e90c..aae2f0501a4 100644
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -79,10 +79,6 @@ enum fixed_addresses {
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
-#ifdef CONFIG_ACPI
- FIX_ACPI_BEGIN,
- FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
#ifdef CONFIG_PCI_MMCONFIG
FIX_PCIE_MCFG,
#endif
@@ -103,23 +99,18 @@ enum fixed_addresses {
(__end_of_permanent_fixed_addresses & 511),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
FIX_WP_TEST,
+#ifdef CONFIG_ACPI
+ FIX_ACPI_BEGIN,
+ FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
__end_of_fixed_addresses
};
-extern void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
extern void reserve_top_address(unsigned long reserve);
-#define set_fixmap(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
#define FIXADDR_TOP ((unsigned long)__FIXADDR_TOP)
@@ -128,38 +119,5 @@ extern void reserve_top_address(unsigned long reserve);
#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE)
#define FIXADDR_BOOT_START (FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
-#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static __always_inline unsigned long fix_to_virt(const unsigned int idx)
-{
- /*
- * this branch gets completely eliminated after inlining,
- * except when someone tries to use fixaddr indices in an
- * illegal way. (such as mixing up address types or using
- * out-of-range indices).
- *
- * If it doesn't get removed, the linker will complain
- * loudly with a reasonably clear error message..
- */
- if (idx >= __end_of_fixed_addresses)
- __this_fixmap_does_not_exist();
-
- return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
- BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
- return __virt_to_fix(vaddr);
-}
-
#endif /* !__ASSEMBLY__ */
#endif
diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h
index 355d26a75a8..00f3d74a052 100644
--- a/include/asm-x86/fixmap_64.h
+++ b/include/asm-x86/fixmap_64.h
@@ -12,6 +12,7 @@
#define _ASM_FIXMAP_64_H
#include <linux/kernel.h>
+#include <asm/acpi.h>
#include <asm/apicdef.h>
#include <asm/page.h>
#include <asm/vsyscall.h>
@@ -39,30 +40,38 @@ enum fixed_addresses {
VSYSCALL_HPET,
FIX_DBGP_BASE,
FIX_EARLYCON_MEM_BASE,
- FIX_HPET_BASE,
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
FIX_EFI_IO_MAP_LAST_PAGE,
FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+ MAX_EFI_IO_PAGES - 1,
+#ifdef CONFIG_PARAVIRT
+ FIX_PARAVIRT_BOOTMAP,
+#endif
+#ifdef CONFIG_ACPI
+ FIX_ACPI_BEGIN,
+ FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
+ __end_of_permanent_fixed_addresses,
+ /*
+ * 256 temporary boot-time mappings, used by early_ioremap(),
+ * before ioremap() is functional.
+ *
+ * We round it up to the next 512 pages boundary so that we
+ * can have a single pgd entry and a single pte table:
+ */
+#define NR_FIX_BTMAPS 64
+#define FIX_BTMAPS_NESTING 4
+ FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 512 -
+ (__end_of_permanent_fixed_addresses & 511),
+ FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
__end_of_fixed_addresses
};
-extern void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-
#define FIXADDR_TOP (VSYSCALL_END-PAGE_SIZE)
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
@@ -71,30 +80,4 @@ extern void __set_fixmap(enum fixed_addresses idx,
#define FIXADDR_USER_START ((unsigned long)VSYSCALL32_VSYSCALL)
#define FIXADDR_USER_END (FIXADDR_USER_START + PAGE_SIZE)
-#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without translation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static __always_inline unsigned long fix_to_virt(const unsigned int idx)
-{
- /*
- * this branch gets completely eliminated after inlining,
- * except when someone tries to use fixaddr indices in an
- * illegal way. (such as mixing up address types or using
- * out-of-range indices).
- *
- * If it doesn't get removed, the linker will complain
- * loudly with a reasonably clear error message..
- */
- if (idx >= __end_of_fixed_addresses)
- __this_fixmap_does_not_exist();
-
- return __fix_to_virt(idx);
-}
-
#endif
diff --git a/include/asm-x86/ftrace.h b/include/asm-x86/ftrace.h
new file mode 100644
index 00000000000..c184441133f
--- /dev/null
+++ b/include/asm-x86/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR ((long)(mcount))
+#define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+#endif
+
+#endif /* CONFIG_FTRACE */
+
+#endif /* _ASM_X86_FTRACE */
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
index 90958ed993f..33b9aeeb35a 100644
--- a/include/asm-x86/gart.h
+++ b/include/asm-x86/gart.h
@@ -1,34 +1,72 @@
-#ifndef _ASM_X8664_IOMMU_H
-#define _ASM_X8664_IOMMU_H 1
-
-extern void pci_iommu_shutdown(void);
-extern void no_iommu_init(void);
-extern int force_iommu, no_iommu;
-extern int iommu_detected;
-#ifdef CONFIG_GART_IOMMU
-extern void gart_iommu_init(void);
-extern void gart_iommu_shutdown(void);
-extern void __init gart_parse_options(char *);
-extern void early_gart_iommu_check(void);
-extern void gart_iommu_hole_init(void);
+#ifndef _ASM_X8664_GART_H
+#define _ASM_X8664_GART_H 1
+
+#include <asm/e820.h>
+#include <asm/iommu.h>
+
+extern void set_up_gart_resume(u32, u32);
+
extern int fallback_aper_order;
extern int fallback_aper_force;
-extern int gart_iommu_aperture;
-extern int gart_iommu_aperture_allowed;
-extern int gart_iommu_aperture_disabled;
extern int fix_aperture;
-#else
-#define gart_iommu_aperture 0
-#define gart_iommu_aperture_allowed 0
-static inline void early_gart_iommu_check(void)
+/* PTE bits. */
+#define GPTE_VALID 1
+#define GPTE_COHERENT 2
+
+/* Aperture control register bits. */
+#define GARTEN (1<<0)
+#define DISGARTCPU (1<<4)
+#define DISGARTIO (1<<5)
+
+/* GART cache control register bits. */
+#define INVGART (1<<0)
+#define GARTPTEERR (1<<1)
+
+/* K8 On-cpu GART registers */
+#define AMD64_GARTAPERTURECTL 0x90
+#define AMD64_GARTAPERTUREBASE 0x94
+#define AMD64_GARTTABLEBASE 0x98
+#define AMD64_GARTCACHECTL 0x9c
+#define AMD64_GARTEN (1<<0)
+
+static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
{
+ u32 tmp, ctl;
+
+ /* address of the mappings table */
+ addr >>= 12;
+ tmp = (u32) addr<<4;
+ tmp &= ~0xf;
+ pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+ /* Enable GART translation for this hammer. */
+ pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+ ctl |= GARTEN;
+ ctl &= ~(DISGARTCPU | DISGARTIO);
+ pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
-static inline void gart_iommu_shutdown(void)
+static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
{
-}
+ if (!aper_base)
+ return 0;
-#endif
+ if (aper_base + aper_size > 0x100000000ULL) {
+ printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
+ return 0;
+ }
+ if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+ printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
+ return 0;
+ }
+ if (aper_size < min_size) {
+ printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
+ return 0;
+ }
+
+ return 1;
+}
#endif
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
index 1de931b263c..0f8504627c4 100644
--- a/include/asm-x86/genapic_64.h
+++ b/include/asm-x86/genapic_64.h
@@ -44,4 +44,6 @@ DECLARE_PER_CPU(int, x2apic_extra_bits);
extern void uv_cpu_init(void);
extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
+extern void setup_apic_routing(void);
+
#endif
diff --git a/include/asm-x86/hardirq.h b/include/asm-x86/hardirq.h
index 314434d664e..000787df66e 100644
--- a/include/asm-x86/hardirq.h
+++ b/include/asm-x86/hardirq.h
@@ -3,3 +3,9 @@
#else
# include "hardirq_64.h"
#endif
+
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu arch_irq_stat_cpu
+
+extern u64 arch_irq_stat(void);
+#define arch_irq_stat arch_irq_stat
diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h
index e153f3b4477..4514b16cc72 100644
--- a/include/asm-x86/highmem.h
+++ b/include/asm-x86/highmem.h
@@ -74,6 +74,9 @@ struct page *kmap_atomic_to_page(void *ptr);
#define flush_cache_kmaps() do { } while (0)
+extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
index 6a9b4ac59bf..82f1ac641bd 100644
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -86,8 +86,8 @@ extern void hpet_unregister_irq_handler(rtc_irq_handler handler);
#else /* CONFIG_HPET_TIMER */
static inline int hpet_enable(void) { return 0; }
-static inline unsigned long hpet_readl(unsigned long a) { return 0; }
static inline int is_hpet_enabled(void) { return 0; }
+#define hpet_readl(a) 0
#endif
#endif /* ASM_X86_HPET_H */
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
index bf025399d93..77ba51df566 100644
--- a/include/asm-x86/hw_irq.h
+++ b/include/asm-x86/hw_irq.h
@@ -1,5 +1,107 @@
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+/*
+ * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ * IRQ/IPI changes taken from work by Thomas Radke
+ * <tomsoft@informatik.tu-chemnitz.de>
+ *
+ * hacked by Andi Kleen for x86-64.
+ * unified by tglx
+ */
+
+#include <asm/irq_vectors.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+
+#define platform_legacy_irq(irq) ((irq) < 16)
+
+/* Interrupt handlers registered during init_IRQ */
+extern void apic_timer_interrupt(void);
+extern void error_interrupt(void);
+extern void spurious_interrupt(void);
+extern void thermal_interrupt(void);
+extern void reschedule_interrupt(void);
+
+extern void invalidate_interrupt(void);
+extern void invalidate_interrupt0(void);
+extern void invalidate_interrupt1(void);
+extern void invalidate_interrupt2(void);
+extern void invalidate_interrupt3(void);
+extern void invalidate_interrupt4(void);
+extern void invalidate_interrupt5(void);
+extern void invalidate_interrupt6(void);
+extern void invalidate_interrupt7(void);
+
+extern void irq_move_cleanup_interrupt(void);
+extern void threshold_interrupt(void);
+
+extern void call_function_interrupt(void);
+extern void call_function_single_interrupt(void);
+
+/* PIC specific functions */
+extern void disable_8259A_irq(unsigned int irq);
+extern void enable_8259A_irq(unsigned int irq);
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+extern void init_8259A(int aeoi);
+
+/* IOAPIC */
+#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+extern unsigned long io_apic_irqs;
+
+extern void init_VISWS_APIC_irqs(void);
+extern void setup_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern void print_IO_APIC(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern void setup_ioapic_dest(void);
+
+#ifdef CONFIG_X86_64
+extern void enable_IO_APIC(void);
+#endif
+
+/* IPI functions */
+extern void send_IPI_self(int vector);
+extern void send_IPI(int dest, int vector);
+
+/* Statistics */
+extern atomic_t irq_err_count;
+extern atomic_t irq_mis_count;
+
+/* EISA */
+extern void eisa_set_level_irq(unsigned int irq);
+
+/* Voyager functions */
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+
#ifdef CONFIG_X86_32
-# include "hw_irq_32.h"
+extern void (*const interrupt[NR_IRQS])(void);
#else
-# include "hw_irq_64.h"
+typedef int vector_irq_t[NR_VECTORS];
+DECLARE_PER_CPU(vector_irq_t, vector_irq);
+extern spinlock_t vector_lock;
+#endif
+extern void setup_vector_irq(int cpu);
+
+#endif /* !ASSEMBLY_ */
+
#endif
diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h
deleted file mode 100644
index ea88054e03f..00000000000
--- a/include/asm-x86/hw_irq_32.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-/*
- * linux/include/asm/hw_irq.h
- *
- * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * moved some of the old arch/i386/kernel/irq.h to here. VY
- *
- * IRQ/IPI changes taken from work by Thomas Radke
- * <tomsoft@informatik.tu-chemnitz.de>
- */
-
-#include <linux/profile.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-
-#define NMI_VECTOR 0x02
-
-/*
- * Various low-level irq details needed by irq.c, process.c,
- * time.c, io_apic.c and smp.c
- *
- * Interrupt entry/exit code at both C and assembly level
- */
-
-extern void (*const interrupt[NR_IRQS])(void);
-
-#ifdef CONFIG_SMP
-void reschedule_interrupt(void);
-void invalidate_interrupt(void);
-void call_function_interrupt(void);
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
-void apic_timer_interrupt(void);
-void error_interrupt(void);
-void spurious_interrupt(void);
-void thermal_interrupt(void);
-#define platform_legacy_irq(irq) ((irq) < 16)
-#endif
-
-void disable_8259A_irq(unsigned int irq);
-void enable_8259A_irq(unsigned int irq);
-int i8259A_irq_pending(unsigned int irq);
-void make_8259A_irq(unsigned int irq);
-void init_8259A(int aeoi);
-void send_IPI_self(int vector);
-void init_VISWS_APIC_irqs(void);
-void setup_IO_APIC(void);
-void disable_IO_APIC(void);
-void print_IO_APIC(void);
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
-void send_IPI(int dest, int vector);
-void setup_ioapic_dest(void);
-
-extern unsigned long io_apic_irqs;
-
-extern atomic_t irq_err_count;
-extern atomic_t irq_mis_count;
-
-#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
-
-#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h
deleted file mode 100644
index 0062ef390f6..00000000000
--- a/include/asm-x86/hw_irq_64.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-/*
- * linux/include/asm/hw_irq.h
- *
- * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * moved some of the old arch/i386/kernel/irq.h to here. VY
- *
- * IRQ/IPI changes taken from work by Thomas Radke
- * <tomsoft@informatik.tu-chemnitz.de>
- *
- * hacked by Andi Kleen for x86-64.
- */
-
-#ifndef __ASSEMBLY__
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#endif
-
-#define NMI_VECTOR 0x02
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define IA32_SYSCALL_VECTOR 0x80
-
-
-/* Reserve the lowest usable priority level 0x20 - 0x2f for triggering
- * cleanup after irq migration.
- */
-#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
-
-/*
- * Vectors 0x30-0x3f are used for ISA interrupts.
- */
-#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define RESCHEDULE_VECTOR 0xfd
-#define CALL_FUNCTION_VECTOR 0xfc
-/* fb free - please don't readd KDB here because it's useless
- (hint - think what a NMI bit does to a vector) */
-#define THERMAL_APIC_VECTOR 0xfa
-#define THRESHOLD_APIC_VECTOR 0xf9
-/* f8 free */
-#define INVALIDATE_TLB_VECTOR_END 0xf7
-#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
-
-#define NUM_INVALIDATE_TLB_VECTORS 8
-
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x41 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
-#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */
-
-
-#ifndef __ASSEMBLY__
-
-/* Interrupt handlers registered during init_IRQ */
-void apic_timer_interrupt(void);
-void spurious_interrupt(void);
-void error_interrupt(void);
-void reschedule_interrupt(void);
-void call_function_interrupt(void);
-void irq_move_cleanup_interrupt(void);
-void invalidate_interrupt0(void);
-void invalidate_interrupt1(void);
-void invalidate_interrupt2(void);
-void invalidate_interrupt3(void);
-void invalidate_interrupt4(void);
-void invalidate_interrupt5(void);
-void invalidate_interrupt6(void);
-void invalidate_interrupt7(void);
-void thermal_interrupt(void);
-void threshold_interrupt(void);
-void i8254_timer_resume(void);
-
-typedef int vector_irq_t[NR_VECTORS];
-DECLARE_PER_CPU(vector_irq_t, vector_irq);
-extern void __setup_vector_irq(int cpu);
-extern spinlock_t vector_lock;
-
-/*
- * Various low-level irq details needed by irq.c, process.c,
- * time.c, io_apic.c and smp.c
- *
- * Interrupt entry/exit code at both C and assembly level
- */
-
-extern void disable_8259A_irq(unsigned int irq);
-extern void enable_8259A_irq(unsigned int irq);
-extern int i8259A_irq_pending(unsigned int irq);
-extern void make_8259A_irq(unsigned int irq);
-extern void init_8259A(int aeoi);
-extern void send_IPI_self(int vector);
-extern void init_VISWS_APIC_irqs(void);
-extern void setup_IO_APIC(void);
-extern void enable_IO_APIC(void);
-extern void disable_IO_APIC(void);
-extern void print_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
-extern void send_IPI(int dest, int vector);
-extern void setup_ioapic_dest(void);
-extern void native_init_IRQ(void);
-
-extern unsigned long io_apic_irqs;
-
-extern atomic_t irq_err_count;
-extern atomic_t irq_mis_count;
-
-#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
-
-#include <asm/ptrace.h>
-
-#define IRQ_NAME2(nr) nr##_interrupt(void)
-#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
-
-/*
- * SMP has a few special interrupts for IPI messages
- */
-
-#define BUILD_IRQ(nr) \
- asmlinkage void IRQ_NAME(nr); \
- asm("\n.p2align\n" \
- "IRQ" #nr "_interrupt:\n\t" \
- "push $~(" #nr ") ; " \
- "jmp common_interrupt");
-
-#define platform_legacy_irq(irq) ((irq) < 16)
-
-#endif
-
-#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
index 45d4df3e51e..2f98df91f1f 100644
--- a/include/asm-x86/i8259.h
+++ b/include/asm-x86/i8259.h
@@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port)
udelay(2);
}
+extern struct irq_chip i8259A_chip;
+
#endif /* __ASM_I8259_H__ */
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
index d5b11f60dbd..bf5d629b3a3 100644
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -3,6 +3,76 @@
#define ARCH_HAS_IOREMAP_WC
+#include <linux/compiler.h>
+
+/*
+ * early_ioremap() and early_iounmap() are for temporary early boot-time
+ * mappings, before the real ioremap() is functional.
+ * A boot-time mapping is currently limited to at most 16 pages.
+ */
+#ifndef __ASSEMBLY__
+extern void early_ioremap_init(void);
+extern void early_ioremap_clear(void);
+extern void early_ioremap_reset(void);
+extern void *early_ioremap(unsigned long offset, unsigned long size);
+extern void early_iounmap(void *addr, unsigned long size);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+#endif
+
+#define build_mmio_read(name, size, type, reg, barrier) \
+static inline type name(const volatile void __iomem *addr) \
+{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \
+:"m" (*(volatile type __force *)addr) barrier); return ret; }
+
+#define build_mmio_write(name, size, type, reg, barrier) \
+static inline void name(type val, volatile void __iomem *addr) \
+{ asm volatile("mov" size " %0,%1": :reg (val), \
+"m" (*(volatile type __force *)addr) barrier); }
+
+build_mmio_read(readb, "b", unsigned char, "q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "r", :"memory")
+
+build_mmio_read(__readb, "b", unsigned char, "q", )
+build_mmio_read(__readw, "w", unsigned short, "r", )
+build_mmio_read(__readl, "l", unsigned int, "r", )
+
+build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
+build_mmio_write(writew, "w", unsigned short, "r", :"memory")
+build_mmio_write(writel, "l", unsigned int, "r", :"memory")
+
+build_mmio_write(__writeb, "b", unsigned char, "q", )
+build_mmio_write(__writew, "w", unsigned short, "r", )
+build_mmio_write(__writel, "l", unsigned int, "r", )
+
+#define readb_relaxed(a) __readb(a)
+#define readw_relaxed(a) __readw(a)
+#define readl_relaxed(a) __readl(a)
+#define __raw_readb __readb
+#define __raw_readw __readw
+#define __raw_readl __readl
+
+#define __raw_writeb __writeb
+#define __raw_writew __writew
+#define __raw_writel __writel
+
+#define mmiowb() barrier()
+
+#ifdef CONFIG_X86_64
+build_mmio_read(readq, "q", unsigned long, "r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "r", )
+build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
+build_mmio_write(__writeq, "q", unsigned long, "r", )
+
+#define readq_relaxed(a) __readq(a)
+#define __raw_readq __readq
+#define __raw_writeq writeq
+
+/* Let people know we have them */
+#define readq readq
+#define writeq writeq
+#endif
+
#ifdef CONFIG_X86_32
# include "io_32.h"
#else
@@ -16,4 +86,17 @@ extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
unsigned long prot_val);
extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+/*
+ * early_ioremap() and early_iounmap() are for temporary early boot-time
+ * mappings, before the real ioremap() is functional.
+ * A boot-time mapping is currently limited to at most 16 pages.
+ */
+extern void early_ioremap_init(void);
+extern void early_ioremap_clear(void);
+extern void early_ioremap_reset(void);
+extern void *early_ioremap(unsigned long offset, unsigned long size);
+extern void early_iounmap(void *addr, unsigned long size);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+
#endif /* _ASM_X86_IO_H */
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 049e81e797a..4df44ed5407 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -122,18 +122,6 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
extern void iounmap(volatile void __iomem *addr);
/*
- * early_ioremap() and early_iounmap() are for temporary early boot-time
- * mappings, before the real ioremap() is functional.
- * A boot-time mapping is currently limited to at most 16 pages.
- */
-extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
-extern void early_ioremap_reset(void);
-extern void *early_ioremap(unsigned long offset, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
* ISA I/O bus memory addresses are 1:1 with the physical address.
*/
#define isa_virt_to_bus virt_to_phys
@@ -149,55 +137,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *) addr;
-}
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-static inline void writeb(unsigned char b, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)addr = b;
-}
-
-static inline void writew(unsigned short b, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)addr = b;
-}
-
-static inline void writel(unsigned int b, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)addr = b;
-}
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define mmiowb()
-
static inline void
memset_io(volatile void __iomem *addr, unsigned char val, int count)
{
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index 0930bedf9e4..ddd8058a502 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -204,77 +204,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-
-static inline __u8 __readb(const volatile void __iomem *addr)
-{
- return *(__force volatile __u8 *)addr;
-}
-
-static inline __u16 __readw(const volatile void __iomem *addr)
-{
- return *(__force volatile __u16 *)addr;
-}
-
-static __always_inline __u32 __readl(const volatile void __iomem *addr)
-{
- return *(__force volatile __u32 *)addr;
-}
-
-static inline __u64 __readq(const volatile void __iomem *addr)
-{
- return *(__force volatile __u64 *)addr;
-}
-
-#define readb(x) __readb(x)
-#define readw(x) __readw(x)
-#define readl(x) __readl(x)
-#define readq(x) __readq(x)
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-#define readq_relaxed(a) readq(a)
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_readq readq
-
-#define mmiowb()
-
-static inline void __writel(__u32 b, volatile void __iomem *addr)
-{
- *(__force volatile __u32 *)addr = b;
-}
-
-static inline void __writeq(__u64 b, volatile void __iomem *addr)
-{
- *(__force volatile __u64 *)addr = b;
-}
-
-static inline void __writeb(__u8 b, volatile void __iomem *addr)
-{
- *(__force volatile __u8 *)addr = b;
-}
-
-static inline void __writew(__u16 b, volatile void __iomem *addr)
-{
- *(__force volatile __u16 *)addr = b;
-}
-
-#define writeq(val, addr) __writeq((val), (addr))
-#define writel(val, addr) __writel((val), (addr))
-#define writew(val, addr) __writew((val), (addr))
-#define writeb(val, addr) __writeb((val), (addr))
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-#define __raw_writeq writeq
-
void __memcpy_fromio(void *, unsigned long, unsigned);
void __memcpy_toio(unsigned long, const void *, unsigned);
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
index d593e14f034..14f82bbcb5f 100644
--- a/include/asm-x86/io_apic.h
+++ b/include/asm-x86/io_apic.h
@@ -11,6 +11,15 @@
* Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
*/
+/* I/O Unit Redirection Table */
+#define IO_APIC_REDIR_VECTOR_MASK 0x000FF
+#define IO_APIC_REDIR_DEST_LOGICAL 0x00800
+#define IO_APIC_REDIR_DEST_PHYSICAL 0x00000
+#define IO_APIC_REDIR_SEND_PENDING (1 << 12)
+#define IO_APIC_REDIR_REMOTE_IRR (1 << 14)
+#define IO_APIC_REDIR_LEVEL_TRIGGER (1 << 15)
+#define IO_APIC_REDIR_MASKED (1 << 16)
+
/*
* The structure of the IO-APIC:
*/
@@ -112,21 +121,32 @@ extern int nr_ioapic_registers[MAX_IO_APICS];
#define MP_MAX_IOAPIC_PIN 127
-struct mp_ioapic_routing {
- int apic_id;
- int gsi_base;
- int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+struct mp_config_ioapic {
+ unsigned long mp_apicaddr;
+ unsigned int mp_apicid;
+ unsigned char mp_type;
+ unsigned char mp_apicver;
+ unsigned char mp_flags;
+};
+
+struct mp_config_intsrc {
+ unsigned int mp_dstapic;
+ unsigned char mp_type;
+ unsigned char mp_irqtype;
+ unsigned short mp_irqflag;
+ unsigned char mp_srcbus;
+ unsigned char mp_srcbusirq;
+ unsigned char mp_dstirq;
};
/* I/O APIC entries */
-extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
/* # of MP IRQ source entries */
extern int mp_irq_entries;
/* MP IRQ source entries */
-extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* non-0 if default (table-less) MP configuration */
extern int mpc_default_type;
@@ -137,6 +157,9 @@ extern int sis_apic_bug;
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
+/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
+extern int timer_through_8259;
+
static inline void disable_ioapic_setup(void)
{
skip_ioapic_setup = 1;
@@ -162,6 +185,8 @@ extern void ioapic_init_mappings(void);
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
+static const int timer_through_8259 = 0;
+static inline void ioapic_init_mappings(void) { }
#endif
#endif
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index 07862fdd23c..068c9a40aa5 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -1,29 +1,34 @@
-#ifndef _ASM_X8664_GART_H
-#define _ASM_X8664_GART_H 1
+#ifndef _ASM_X8664_IOMMU_H
+#define _ASM_X8664_IOMMU_H 1
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
extern int iommu_detected;
-#ifdef CONFIG_IOMMU
+
+#ifdef CONFIG_GART_IOMMU
+extern int gart_iommu_aperture;
+extern int gart_iommu_aperture_allowed;
+extern int gart_iommu_aperture_disabled;
+
+extern void early_gart_iommu_check(void);
extern void gart_iommu_init(void);
extern void gart_iommu_shutdown(void);
extern void __init gart_parse_options(char *);
-extern void iommu_hole_init(void);
-extern int fallback_aper_order;
-extern int fallback_aper_force;
-extern int iommu_aperture;
-extern int iommu_aperture_allowed;
-extern int iommu_aperture_disabled;
-extern int fix_aperture;
+extern void gart_iommu_hole_init(void);
+
#else
-#define iommu_aperture 0
-#define iommu_aperture_allowed 0
+#define gart_iommu_aperture 0
+#define gart_iommu_aperture_allowed 0
+#define gart_iommu_aperture_disabled 1
-static inline void gart_iommu_shutdown(void)
+static inline void early_gart_iommu_check(void)
{
}
+static inline void gart_iommu_shutdown(void)
+{
+}
#endif
#endif
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index ecc80f341f3..196d63c28aa 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -20,6 +20,7 @@
#include <asm/hw_irq.h>
#include <asm/apic.h>
+#include <asm/smp.h>
/*
* the following functions deal with sending IPIs between CPUs.
diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h
index 7ba905465a5..1a292575731 100644
--- a/include/asm-x86/irq.h
+++ b/include/asm-x86/irq.h
@@ -1,5 +1,50 @@
-#ifdef CONFIG_X86_32
-# include "irq_32.h"
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+/*
+ * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * IRQ/IPI changes taken from work by Thomas Radke
+ * <tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
+
+static inline int irq_canonicalize(int irq)
+{
+ return ((irq == 2) ? 9 : irq);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
+#ifdef CONFIG_4KSTACKS
+ extern void irq_ctx_init(int cpu);
+ extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
#else
-# include "irq_64.h"
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+# ifdef CONFIG_X86_64
+# define __ARCH_HAS_DO_SOFTIRQ
+# endif
+#endif
+
+#ifdef CONFIG_IRQBALANCE
+extern int irqbalance_disable(char *str);
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpumask.h>
+extern void fixup_irqs(cpumask_t map);
#endif
+
+extern unsigned int do_IRQ(struct pt_regs *regs);
+extern void init_IRQ(void);
+extern void native_init_IRQ(void);
+
+/* Interrupt vector management */
+extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h
deleted file mode 100644
index 0b79f318524..00000000000
--- a/include/asm-x86/irq_32.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-/*
- * linux/include/asm/irq.h
- *
- * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * IRQ/IPI changes taken from work by Thomas Radke
- * <tomsoft@informatik.tu-chemnitz.de>
- */
-
-#include <linux/sched.h>
-/* include comes from machine specific directory */
-#include "irq_vectors.h"
-#include <asm/thread_info.h>
-
-static inline int irq_canonicalize(int irq)
-{
- return ((irq == 2) ? 9 : irq);
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-# define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
-#endif
-
-#ifdef CONFIG_4KSTACKS
- extern void irq_ctx_init(int cpu);
- extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_IRQBALANCE
-extern int irqbalance_disable(char *str);
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
-#endif
-
-unsigned int do_IRQ(struct pt_regs *regs);
-void init_IRQ(void);
-void __init native_init_IRQ(void);
-
-/* Interrupt vector management */
-extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
-
-#endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h
deleted file mode 100644
index 083d35a62c9..00000000000
--- a/include/asm-x86/irq_64.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-/*
- * linux/include/asm/irq.h
- *
- * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * IRQ/IPI changes taken from work by Thomas Radke
- * <tomsoft@informatik.tu-chemnitz.de>
- */
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-
-/*
- * The maximum number of vectors supported by x86_64 processors
- * is limited to 256. For processors other than x86_64, NR_VECTORS
- * should be changed accordingly.
- */
-#define NR_VECTORS 256
-
-#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */
-
-#define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
-#define NR_IRQ_VECTORS NR_IRQS
-
-static inline int irq_canonicalize(int irq)
-{
- return ((irq == 2) ? 9 : irq);
-}
-
-#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
-
-#ifdef CONFIG_HOTPLUG_CPU
-#include <linux/cpumask.h>
-extern void fixup_irqs(cpumask_t map);
-#endif
-
-#define __ARCH_HAS_DO_SOFTIRQ 1
-
-#endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
new file mode 100644
index 00000000000..90b1d1f12f0
--- /dev/null
+++ b/include/asm-x86/irq_vectors.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+#include <linux/threads.h>
+
+#define NMI_VECTOR 0x02
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#ifdef CONFIG_X86_32
+# define SYSCALL_VECTOR 0x80
+#else
+# define IA32_SYSCALL_VECTOR 0x80
+#endif
+
+/*
+ * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
+ * cleanup after irq migration on 64 bit.
+ */
+#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit.
+ * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit.
+ */
+#ifdef CONFIG_X86_32
+#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR)
+#else
+#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
+#endif
+#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ * some of the following vectors are 'rare', they are merged
+ * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ * TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ * Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#ifdef CONFIG_X86_32
+
+# define SPURIOUS_APIC_VECTOR 0xff
+# define ERROR_APIC_VECTOR 0xfe
+# define INVALIDATE_TLB_VECTOR 0xfd
+# define RESCHEDULE_VECTOR 0xfc
+# define CALL_FUNCTION_VECTOR 0xfb
+# define CALL_FUNCTION_SINGLE_VECTOR 0xfa
+# define THERMAL_APIC_VECTOR 0xf0
+
+#else
+
+#define SPURIOUS_APIC_VECTOR 0xff
+#define ERROR_APIC_VECTOR 0xfe
+#define RESCHEDULE_VECTOR 0xfd
+#define CALL_FUNCTION_VECTOR 0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
+#define THERMAL_APIC_VECTOR 0xfa
+#define THRESHOLD_APIC_VECTOR 0xf9
+#define INVALIDATE_TLB_VECTOR_END 0xf7
+#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
+
+#define NUM_INVALIDATE_TLB_VECTORS 8
+
+#endif
+
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee) we
+ * start at 0x31(0x41) to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#ifdef CONFIG_X86_32
+# define FIRST_DEVICE_VECTOR 0x31
+#else
+# define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
+#endif
+
+#define NR_VECTORS 256
+
+#define FPU_IRQ 13
+
+#define FIRST_VM86_IRQ 3
+#define LAST_VM86_IRQ 15
+#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
+
+#if !defined(CONFIG_X86_VOYAGER)
+
+# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
+
+# define NR_IRQS 224
+
+# if (224 >= 32 * NR_CPUS)
+# define NR_IRQ_VECTORS NR_IRQS
+# else
+# define NR_IRQ_VECTORS (32 * NR_CPUS)
+# endif
+
+# else /* IO_APIC || PARAVIRT */
+
+# define NR_IRQS 16
+# define NR_IRQ_VECTORS NR_IRQS
+
+# endif
+
+#else /* !VISWS && !VOYAGER */
+
+# define NR_IRQS 224
+# define NR_IRQ_VECTORS NR_IRQS
+
+#endif /* VISWS */
+
+/* Voyager specific defines */
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0 0
+#define VIC_CPI_LEVEL1 1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI 2
+#define VIC_INVALIDATE_CPI 3
+#define VIC_RESCHEDULE_CPI 4
+#define VIC_ENABLE_IRQ_CPI 5
+#define VIC_CALL_FUNCTION_CPI 6
+#define VIC_CALL_FUNCTION_SINGLE_CPI 7
+
+/* Now the QIC CPIs: Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET 1
+#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_SINGLE_CPI (VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_SINGLE_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT 8
+#define VIC_CMN_INT 15
+
+/* This is the boot CPI for alternate processors. It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
+
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h
index c242527f970..424acb48cd6 100644
--- a/include/asm-x86/irqflags.h
+++ b/include/asm-x86/irqflags.h
@@ -111,14 +111,35 @@ static inline unsigned long __raw_local_irq_save(void)
#define DISABLE_INTERRUPTS(x) cli
#ifdef CONFIG_X86_64
+#define SWAPGS swapgs
+/*
+ * Currently paravirt can't handle swapgs nicely when we
+ * don't have a stack we can rely on (such as a user space
+ * stack). So we either find a way around these or just fault
+ * and emulate if a guest tries to call swapgs directly.
+ *
+ * Either way, this is a good way to document that we don't
+ * have a reliable stack. x86_64 only.
+ */
+#define SWAPGS_UNSAFE_STACK swapgs
+
+#define PARAVIRT_ADJUST_EXCEPTION_FRAME /* */
+
#define INTERRUPT_RETURN iretq
-#define ENABLE_INTERRUPTS_SYSCALL_RET \
- movq %gs:pda_oldrsp, %rsp; \
- swapgs; \
- sysretq;
+#define USERGS_SYSRET64 \
+ swapgs; \
+ sysretq;
+#define USERGS_SYSRET32 \
+ swapgs; \
+ sysretl
+#define ENABLE_INTERRUPTS_SYSEXIT32 \
+ swapgs; \
+ sti; \
+ sysexit
+
#else
#define INTERRUPT_RETURN iret
-#define ENABLE_INTERRUPTS_SYSCALL_RET sti; sysexit
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
#define GET_CR0_INTO_EAX movl %cr0, %eax
#endif
@@ -169,18 +190,6 @@ static inline void trace_hardirqs_fixup(void)
#else
#ifdef CONFIG_X86_64
-/*
- * Currently paravirt can't handle swapgs nicely when we
- * don't have a stack we can rely on (such as a user space
- * stack). So we either find a way around these or just fault
- * and emulate if a guest tries to call swapgs directly.
- *
- * Either way, this is a good way to document that we don't
- * have a reliable stack. x86_64 only.
- */
-#define SWAPGS_UNSAFE_STACK swapgs
-#define ARCH_TRACE_IRQS_ON call trace_hardirqs_on_thunk
-#define ARCH_TRACE_IRQS_OFF call trace_hardirqs_off_thunk
#define ARCH_LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
#define ARCH_LOCKDEP_SYS_EXIT_IRQ \
TRACE_IRQS_ON; \
@@ -192,24 +201,6 @@ static inline void trace_hardirqs_fixup(void)
TRACE_IRQS_OFF;
#else
-#define ARCH_TRACE_IRQS_ON \
- pushl %eax; \
- pushl %ecx; \
- pushl %edx; \
- call trace_hardirqs_on; \
- popl %edx; \
- popl %ecx; \
- popl %eax;
-
-#define ARCH_TRACE_IRQS_OFF \
- pushl %eax; \
- pushl %ecx; \
- pushl %edx; \
- call trace_hardirqs_off; \
- popl %edx; \
- popl %ecx; \
- popl %eax;
-
#define ARCH_LOCKDEP_SYS_EXIT \
pushl %eax; \
pushl %ecx; \
@@ -223,8 +214,8 @@ static inline void trace_hardirqs_fixup(void)
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
-# define TRACE_IRQS_ON ARCH_TRACE_IRQS_ON
-# define TRACE_IRQS_OFF ARCH_TRACE_IRQS_OFF
+# define TRACE_IRQS_ON call trace_hardirqs_on_thunk;
+# define TRACE_IRQS_OFF call trace_hardirqs_off_thunk;
#else
# define TRACE_IRQS_ON
# define TRACE_IRQS_OFF
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
index bfd9900742b..76f392146da 100644
--- a/include/asm-x86/kvm_para.h
+++ b/include/asm-x86/kvm_para.h
@@ -71,7 +71,8 @@ static inline long kvm_hypercall0(unsigned int nr)
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr));
+ : "a"(nr)
+ : "memory");
return ret;
}
@@ -80,7 +81,8 @@ static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1));
+ : "a"(nr), "b"(p1)
+ : "memory");
return ret;
}
@@ -90,7 +92,8 @@ static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2));
+ : "a"(nr), "b"(p1), "c"(p2)
+ : "memory");
return ret;
}
@@ -100,7 +103,8 @@ static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
+ : "memory");
return ret;
}
@@ -111,7 +115,8 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
+ : "memory");
return ret;
}
diff --git a/include/asm-x86/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h
index 8327907c79b..017c8c19ad8 100644
--- a/include/asm-x86/mach-bigsmp/mach_apic.h
+++ b/include/asm-x86/mach-bigsmp/mach_apic.h
@@ -81,7 +81,7 @@ static inline int multi_timer_check(int apic, int irq)
static inline int apicid_to_node(int logical_apicid)
{
- return (0);
+ return apicid_2_node[hard_smp_processor_id()];
}
static inline int cpu_present_to_apicid(int mps_cpu)
diff --git a/include/asm-x86/mach-bigsmp/mach_mpspec.h b/include/asm-x86/mach-bigsmp/mach_mpspec.h
deleted file mode 100644
index 6b5dadcf1d0..00000000000
--- a/include/asm-x86/mach-bigsmp/mach_mpspec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#define MAX_MP_BUSSES 32
-
-#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-default/entry_arch.h b/include/asm-x86/mach-default/entry_arch.h
index bc861469bdb..9283b60a1dd 100644
--- a/include/asm-x86/mach-default/entry_arch.h
+++ b/include/asm-x86/mach-default/entry_arch.h
@@ -13,6 +13,7 @@
BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
#endif
/*
diff --git a/include/asm-x86/mach-default/irq_vectors.h b/include/asm-x86/mach-default/irq_vectors.h
deleted file mode 100644
index 881c63ca61a..00000000000
--- a/include/asm-x86/mach-default/irq_vectors.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file should contain #defines for all of the interrupt vector
- * numbers used by this architecture.
- *
- * In addition, there are some standard defines:
- *
- * FIRST_EXTERNAL_VECTOR:
- * The first free place for external interrupts
- *
- * SYSCALL_VECTOR:
- * The IRQ vector a syscall makes the user to kernel transition
- * under.
- *
- * TIMER_IRQ:
- * The IRQ number the timer interrupt comes in at.
- *
- * NR_IRQS:
- * The total number of interrupt vectors (including all the
- * architecture specific interrupts) needed.
- *
- */
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-
-/*
- * The maximum number of vectors supported by i386 processors
- * is limited to 256. For processors other than i386, NR_VECTORS
- * should be changed accordingly.
- */
-#define NR_VECTORS 256
-
-#include "irq_vectors_limits.h"
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mach-default/irq_vectors_limits.h b/include/asm-x86/mach-default/irq_vectors_limits.h
deleted file mode 100644
index a90c7a60109..00000000000
--- a/include/asm-x86/mach-default/irq_vectors_limits.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_IRQ_VECTORS_LIMITS_H
-#define _ASM_IRQ_VECTORS_LIMITS_H
-
-#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT)
-#define NR_IRQS 224
-# if (224 >= 32 * NR_CPUS)
-# define NR_IRQ_VECTORS NR_IRQS
-# else
-# define NR_IRQ_VECTORS (32 * NR_CPUS)
-# endif
-#else
-#define NR_IRQS 16
-#define NR_IRQ_VECTORS NR_IRQS
-#endif
-
-#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
index 21003b56ae9..0b2cde5e1b7 100644
--- a/include/asm-x86/mach-default/mach_apic.h
+++ b/include/asm-x86/mach-default/mach_apic.h
@@ -77,7 +77,11 @@ static inline void setup_apic_routing(void)
static inline int apicid_to_node(int logical_apicid)
{
+#ifdef CONFIG_SMP
+ return apicid_2_node[hard_smp_processor_id()];
+#else
return 0;
+#endif
}
#endif
diff --git a/include/asm-x86/mach-default/setup_arch.h b/include/asm-x86/mach-default/setup_arch.h
index 605e3ccb991..38846208b54 100644
--- a/include/asm-x86/mach-default/setup_arch.h
+++ b/include/asm-x86/mach-default/setup_arch.h
@@ -1,7 +1,3 @@
/* Hook to call BIOS initialisation function */
/* no action for generic */
-
-#ifndef ARCH_SETUP
-#define ARCH_SETUP
-#endif
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index 56d0e1fa025..56d001b9dce 100644
--- a/include/asm-x86/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
@@ -3,7 +3,9 @@
static inline void smpboot_clear_io_apic_irqs(void)
{
+#ifdef CONFIG_X86_IO_APIC
io_apic_irqs = 0;
+#endif
}
static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
@@ -35,17 +37,23 @@ static inline void smpboot_restore_warm_reset_vector(void)
static inline void __init smpboot_setup_io_apic(void)
{
+#ifdef CONFIG_X86_IO_APIC
/*
* Here we can be sure that there is an IO-APIC in the system. Let's
* go and set it up:
*/
if (!skip_ioapic_setup && nr_ioapics)
setup_IO_APIC();
- else
+ else {
nr_ioapics = 0;
+ localise_nmi_watchdog();
+ }
+#endif
}
static inline void smpboot_clear_io_apic(void)
{
+#ifdef CONFIG_X86_IO_APIC
nr_ioapics = 0;
+#endif
}
diff --git a/include/asm-x86/mach-es7000/mach_mpspec.h b/include/asm-x86/mach-es7000/mach_mpspec.h
deleted file mode 100644
index b1f5039d450..00000000000
--- a/include/asm-x86/mach-es7000/mach_mpspec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#define MAX_MP_BUSSES 256
-
-#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
index 0d0b5ba2e9d..586cadbf378 100644
--- a/include/asm-x86/mach-generic/mach_mpparse.h
+++ b/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,7 +1,10 @@
#ifndef _MACH_MPPARSE_H
#define _MACH_MPPARSE_H 1
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid);
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
#endif
diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h
index 75a56e5afbe..d802465e026 100644
--- a/include/asm-x86/mach-numaq/mach_apic.h
+++ b/include/asm-x86/mach-numaq/mach_apic.h
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void)
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline int apic_id_registered(void)
@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(int mps_cpu)
return BAD_APICID;
}
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
static inline int apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
return physid_mask_of_physid(cpu + 4*node);
}
-struct mpc_config_translation {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- int quad = translation_record->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
- printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver, quad, logical_apicid);
- return logical_apicid;
-}
-
extern void *xquad_portio;
static inline void setup_portio_remap(void)
diff --git a/include/asm-x86/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h
index 459b1240118..626aef6b155 100644
--- a/include/asm-x86/mach-numaq/mach_mpparse.h
+++ b/include/asm-x86/mach-numaq/mach_mpparse.h
@@ -1,14 +1,7 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-numaq/mach_mpspec.h b/include/asm-x86/mach-numaq/mach_mpspec.h
deleted file mode 100644
index dffb09856f8..00000000000
--- a/include/asm-x86/mach-numaq/mach_mpspec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 512
-
-#define MAX_MP_BUSSES 32
-
-#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-summit/mach_mpspec.h b/include/asm-x86/mach-summit/mach_mpspec.h
deleted file mode 100644
index bd765523511..00000000000
--- a/include/asm-x86/mach-summit/mach_mpspec.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
-#define MAX_MP_BUSSES 260
-
-#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-visws/entry_arch.h b/include/asm-x86/mach-visws/entry_arch.h
index b183fa6d83d..86be554342d 100644
--- a/include/asm-x86/mach-visws/entry_arch.h
+++ b/include/asm-x86/mach-visws/entry_arch.h
@@ -1,23 +1,5 @@
/*
- * The following vectors are part of the Linux architecture, there
- * is no hardware IRQ pin equivalent for them, they are triggered
- * through the ICC by us (IPIs)
+ * VISWS uses the standard Linux entry points:
*/
-#ifdef CONFIG_X86_SMP
-BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
-BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
-#endif
-/*
- * every pentium local APIC has two 'local interrupts', with a
- * soft-definable vector attached to both interrupts, one of
- * which is a timer interrupt, the other one is error counter
- * overflow. Linux uses the local APIC timer interrupt to get
- * a much simpler SMP time architecture:
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
-BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
-BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-#endif
+#include "../mach-default/entry_arch.h"
diff --git a/include/asm-x86/mach-visws/irq_vectors.h b/include/asm-x86/mach-visws/irq_vectors.h
deleted file mode 100644
index cb572d8db50..00000000000
--- a/include/asm-x86/mach-visws/irq_vectors.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * IRQ definitions
- */
-#define NR_VECTORS 256
-#define NR_IRQS 224
-#define NR_IRQ_VECTORS NR_IRQS
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mach-visws/mach_apic.h b/include/asm-x86/mach-visws/mach_apic.h
index a9ef33a8a99..6943e7a1d0e 100644
--- a/include/asm-x86/mach-visws/mach_apic.h
+++ b/include/asm-x86/mach-visws/mach_apic.h
@@ -1,103 +1 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#include <mach_apicdef.h>
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-
-#define no_balance_irq (0)
-#define esr_disable (0)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-
-#ifdef CONFIG_SMP
- #define TARGET_CPUS cpu_online_map
-#else
- #define TARGET_CPUS cpumask_of_cpu(0)
-#endif
-
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
-
-static inline int apic_id_registered(void)
-{
- return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
- unsigned long val;
-
- apic_write_around(APIC_DFR, APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
- apic_write_around(APIC_LDR, val);
-}
-
-static inline void summit_check(char *oem, char *productid)
-{
-}
-
-static inline void setup_apic_routing(void)
-{
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return 0;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
- return 1 << cpu;
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < get_physical_broadcast())
- return mps_cpu;
- else
- return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
- return physid_mask_of_physid(apicid);
-}
-
-#define WAKE_SECONDARY_VIA_INIT
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- return cpus_addr(cpumask)[0];
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
+#include "../mach-default/mach_apic.h"
diff --git a/include/asm-x86/mach-visws/mach_apicdef.h b/include/asm-x86/mach-visws/mach_apicdef.h
index 826cfa97d77..42711d152a9 100644
--- a/include/asm-x86/mach-visws/mach_apicdef.h
+++ b/include/asm-x86/mach-visws/mach_apicdef.h
@@ -1,12 +1 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xF);
-}
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif
+#include "../mach-default/mach_apicdef.h"
diff --git a/include/asm-x86/mach-visws/setup_arch.h b/include/asm-x86/mach-visws/setup_arch.h
index 33f700ef683..fa4766ca2d1 100644
--- a/include/asm-x86/mach-visws/setup_arch.h
+++ b/include/asm-x86/mach-visws/setup_arch.h
@@ -1,8 +1 @@
-/* Hook to call BIOS initialisation function */
-
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;
-
-/* no action for visws */
-
-#define ARCH_SETUP
+#include "../mach-default/setup_arch.h"
diff --git a/include/asm-x86/mach-visws/smpboot_hooks.h b/include/asm-x86/mach-visws/smpboot_hooks.h
index c9b83e395a2..e4433ca8871 100644
--- a/include/asm-x86/mach-visws/smpboot_hooks.h
+++ b/include/asm-x86/mach-visws/smpboot_hooks.h
@@ -1,28 +1 @@
-static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
-{
- CMOS_WRITE(0xa, 0xf);
- local_flush_tlb();
- Dprintk("1.\n");
- *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
- Dprintk("2.\n");
- *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
- Dprintk("3.\n");
-}
-
-/* for visws do nothing for any of these */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-}
-
-static inline void smpboot_restore_warm_reset_vector(void)
-{
-}
-
-static inline void smpboot_setup_io_apic(void)
-{
-}
-
-static inline void smpboot_clear_io_apic(void)
-{
-}
+#include "../mach-default/smpboot_hooks.h"
diff --git a/include/asm-x86/mach-voyager/entry_arch.h b/include/asm-x86/mach-voyager/entry_arch.h
index 4a1e1e8c10b..ae52624b593 100644
--- a/include/asm-x86/mach-voyager/entry_arch.h
+++ b/include/asm-x86/mach-voyager/entry_arch.h
@@ -23,4 +23,4 @@ BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
-
+BUILD_INTERRUPT(qic_call_function_single_interrupt, QIC_CALL_FUNCTION_SINGLE_CPI);
diff --git a/include/asm-x86/mach-voyager/irq_vectors.h b/include/asm-x86/mach-voyager/irq_vectors.h
deleted file mode 100644
index 165421f5821..00000000000
--- a/include/asm-x86/mach-voyager/irq_vectors.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/irq_vectors.h
- *
- * This file provides definitions for the VIC and QIC CPIs
- */
-
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0 0
-#define VIC_CPI_LEVEL1 1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI 2
-#define VIC_INVALIDATE_CPI 3
-#define VIC_RESCHEDULE_CPI 4
-#define VIC_ENABLE_IRQ_CPI 5
-#define VIC_CALL_FUNCTION_CPI 6
-
-/* Now the QIC CPIs: Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET 1
-#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT 8
-#define VIC_CMN_INT 15
-
-/* This is the boot CPI for alternate processors. It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
-
-#define NR_VECTORS 256
-#define NR_IRQS 224
-#define NR_IRQ_VECTORS NR_IRQS
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-#ifndef __ASSEMBLY__
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h
new file mode 100644
index 00000000000..95beda07c6f
--- /dev/null
+++ b/include/asm-x86/mmconfig.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_MMCONFIG_H
+#define _ASM_MMCONFIG_H
+
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __cpuinit fam10h_check_enable_mmcfg(void);
+extern void __init check_enable_amd_mmconf_dmi(void);
+#else
+static inline void fam10h_check_enable_mmcfg(void) { }
+static inline void check_enable_amd_mmconf_dmi(void) { }
+#endif
+
+#endif
diff --git a/include/asm-x86/mmu_context.h b/include/asm-x86/mmu_context.h
index 6598450da6c..fac57014e7c 100644
--- a/include/asm-x86/mmu_context.h
+++ b/include/asm-x86/mmu_context.h
@@ -1,5 +1,37 @@
+#ifndef __ASM_X86_MMU_CONTEXT_H
+#define __ASM_X86_MMU_CONTEXT_H
+
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/paravirt.h>
+#ifndef CONFIG_PARAVIRT
+#include <asm-generic/mm_hooks.h>
+
+static inline void paravirt_activate_mm(struct mm_struct *prev,
+ struct mm_struct *next)
+{
+}
+#endif /* !CONFIG_PARAVIRT */
+
+/*
+ * Used for LDT copy/destruction.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context(struct mm_struct *mm);
+
#ifdef CONFIG_X86_32
# include "mmu_context_32.h"
#else
# include "mmu_context_64.h"
#endif
+
+#define activate_mm(prev, next) \
+do { \
+ paravirt_activate_mm((prev), (next)); \
+ switch_mm((prev), (next), NULL); \
+} while (0);
+
+
+#endif /* __ASM_X86_MMU_CONTEXT_H */
diff --git a/include/asm-x86/mmu_context_32.h b/include/asm-x86/mmu_context_32.h
index 9756ae0f1dd..824fc575c6d 100644
--- a/include/asm-x86/mmu_context_32.h
+++ b/include/asm-x86/mmu_context_32.h
@@ -1,28 +1,6 @@
#ifndef __I386_SCHED_H
#define __I386_SCHED_H
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/paravirt.h>
-#ifndef CONFIG_PARAVIRT
-#include <asm-generic/mm_hooks.h>
-
-static inline void paravirt_activate_mm(struct mm_struct *prev,
- struct mm_struct *next)
-{
-}
-#endif /* !CONFIG_PARAVIRT */
-
-
-/*
- * Used for LDT copy/destruction.
- */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void destroy_context(struct mm_struct *mm);
-
-
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
#ifdef CONFIG_SMP
@@ -75,10 +53,4 @@ static inline void switch_mm(struct mm_struct *prev,
#define deactivate_mm(tsk, mm) \
asm("movl %0,%%gs": :"r" (0));
-#define activate_mm(prev, next) \
-do { \
- paravirt_activate_mm((prev), (next)); \
- switch_mm((prev), (next), NULL); \
-} while (0);
-
#endif
diff --git a/include/asm-x86/mmu_context_64.h b/include/asm-x86/mmu_context_64.h
index ca44c71e7fb..c7000634cca 100644
--- a/include/asm-x86/mmu_context_64.h
+++ b/include/asm-x86/mmu_context_64.h
@@ -1,21 +1,7 @@
#ifndef __X86_64_MMU_CONTEXT_H
#define __X86_64_MMU_CONTEXT_H
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/pgalloc.h>
#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#ifndef CONFIG_PARAVIRT
-#include <asm-generic/mm_hooks.h>
-#endif
-
-/*
- * possibly do the LDT unload here?
- */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void destroy_context(struct mm_struct *mm);
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
@@ -65,8 +51,4 @@ do { \
asm volatile("movl %0,%%fs"::"r"(0)); \
} while (0)
-#define activate_mm(prev, next) \
- switch_mm((prev), (next), NULL)
-
-
#endif
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
index cb2cad0b65a..b2298a22756 100644
--- a/include/asm-x86/mmzone_32.h
+++ b/include/asm-x86/mmzone_32.h
@@ -12,11 +12,9 @@
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#ifdef CONFIG_X86_NUMAQ
- #include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
- #include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
extern int get_memcfg_numa_flat(void);
/*
@@ -26,28 +24,20 @@ extern int get_memcfg_numa_flat(void);
*/
static inline void get_memcfg_numa(void)
{
-#ifdef CONFIG_X86_NUMAQ
+
if (get_memcfg_numaq())
return;
-#elif defined(CONFIG_ACPI_SRAT)
if (get_memcfg_from_srat())
return;
-#endif
-
get_memcfg_numa_flat();
}
extern int early_pfn_to_nid(unsigned long pfn);
-extern void numa_kva_reserve(void);
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
-static inline void numa_kva_reserve(void)
-{
-}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_DISCONTIGMEM
@@ -55,14 +45,14 @@ static inline void numa_kva_reserve(void)
/*
* generic node memory support, the following assumptions apply:
*
- * 1) memory comes in 256Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contigious chunks which are either present or not
* 2) we will not have more than 64Gb in total
*
* for now assume that 64Gb is max amount of RAM for whole system
* 64Gb / 4096bytes/page = 16777216 pages
*/
#define MAX_NR_PAGES 16777216
-#define MAX_ELEMENTS 256
+#define MAX_ELEMENTS 1024
#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
extern s8 physnode_map[];
@@ -87,9 +77,6 @@ static inline int pfn_to_nid(unsigned long pfn)
__pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
})
-#ifdef CONFIG_X86_NUMAQ /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn) ((pfn) < num_physpages)
-#else
static inline int pfn_valid(int pfn)
{
int nid = pfn_to_nid(pfn);
@@ -98,7 +85,6 @@ static inline int pfn_valid(int pfn)
return (pfn < node_end_pfn(nid));
return 0;
}
-#endif /* CONFIG_X86_NUMAQ */
#endif /* CONFIG_DISCONTIGMEM */
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
index 57a991b9c05..b6995e567fc 100644
--- a/include/asm-x86/mpspec.h
+++ b/include/asm-x86/mpspec.h
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
extern int pic_mode;
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
#define MAX_APICID 256
#else
@@ -21,26 +27,30 @@ extern int pic_mode;
/* Each PCI slot may be a combo card with its own bus. 4 IRQ pins per slot. */
#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+#endif
+
extern void early_find_smp_config(void);
extern void early_get_smp_config(void);
-#endif
-
#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
extern int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES];
-
extern unsigned int boot_cpu_physical_apicid;
+extern unsigned int max_physical_apicid;
extern int smp_found_config;
extern int mpc_default_type;
extern unsigned long mp_lapic_addr;
extern void find_smp_config(void);
extern void get_smp_config(void);
+#ifdef CONFIG_X86_MPPARSE
+extern void early_reserve_e820_mpc_new(void);
+#else
+static inline void early_reserve_e820_mpc_new(void) { }
+#endif
void __cpuinit generic_processor_info(int apicid, int version);
#ifdef CONFIG_ACPI
@@ -49,6 +59,17 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+#ifdef CONFIG_X86_IO_APIC
+extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+ u32 gsi, int triggering, int polarity);
+#else
+static inline int
+mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+ u32 gsi, int triggering, int polarity)
+{
+ return 0;
+}
+#endif
#endif /* CONFIG_ACPI */
#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS)
@@ -101,6 +122,7 @@ typedef struct physid_mask physid_mask_t;
__physid_mask; \
})
+/* Note: will create very large stack frames if physid_mask_t is big */
#define physid_mask_of_physid(physid) \
({ \
physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
@@ -108,6 +130,12 @@ typedef struct physid_mask physid_mask_t;
__physid_mask; \
})
+static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
+{
+ physids_clear(*map);
+ physid_set(physid, *map);
+}
+
#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
diff --git a/include/asm-x86/mpspec_def.h b/include/asm-x86/mpspec_def.h
index dc6ef85e362..38d1e73b49e 100644
--- a/include/asm-x86/mpspec_def.h
+++ b/include/asm-x86/mpspec_def.h
@@ -17,10 +17,11 @@
# define MAX_MPC_ENTRY 1024
# define MAX_APICS 256
#else
-/*
- * A maximum of 255 APICs with the current APIC ID architecture.
- */
-# define MAX_APICS 255
+# if NR_CPUS <= 255
+# define MAX_APICS 255
+# else
+# define MAX_APICS 32768
+# endif
#endif
struct intel_mp_floating {
diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h
index 09413ad39d3..44bce773012 100644
--- a/include/asm-x86/msr-index.h
+++ b/include/asm-x86/msr-index.h
@@ -111,7 +111,9 @@
#define MSR_K8_TOP_MEM2 0xc001001d
#define MSR_K8_SYSCFG 0xc0010010
#define MSR_K8_HWCR 0xc0010015
-#define MSR_K8_ENABLE_C1E 0xc0010055
+#define MSR_K8_INT_PENDING_MSG 0xc0010055
+/* C1E active bits in int pending message */
+#define K8_INTP_C1E_ACTIVE_MASK 0x18000000
#define MSR_K8_TSEG_ADDR 0xc0010112
#define K8_MTRRFIXRANGE_DRAM_ENABLE 0x00040000 /* MtrrFixDramEn bit */
#define K8_MTRRFIXRANGE_DRAM_MODIFY 0x00080000 /* MtrrFixDramModEn bit */
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index 2b5f2c91db2..ca110ee73f0 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -66,7 +66,7 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
static inline void native_write_msr(unsigned int msr,
unsigned low, unsigned high)
{
- asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high));
+ asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
}
static inline int native_write_msr_safe(unsigned int msr,
@@ -81,7 +81,8 @@ static inline int native_write_msr_safe(unsigned int msr,
_ASM_EXTABLE(2b, 3b)
: "=a" (err)
: "c" (msr), "0" (low), "d" (high),
- "i" (-EFAULT));
+ "i" (-EFAULT)
+ : "memory");
return err;
}
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 1e363021e72..21f8d0202a8 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -15,38 +15,13 @@
*/
int do_nmi_callback(struct pt_regs *regs, int cpu);
-#ifdef CONFIG_PM
-
-/** Replace the PM callback routine for NMI. */
-struct pm_dev *set_nmi_pm_callback(pm_callback callback);
-
-/** Unset the PM callback routine back to the default. */
-void unset_nmi_pm_callback(struct pm_dev *dev);
-
-#else
-
-static inline struct pm_dev *set_nmi_pm_callback(pm_callback callback)
-{
- return 0;
-}
-
-static inline void unset_nmi_pm_callback(struct pm_dev *dev)
-{
-}
-
-#endif /* CONFIG_PM */
-
#ifdef CONFIG_X86_64
extern void default_do_nmi(struct pt_regs *);
-extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern void nmi_watchdog_default(void);
-#else
-#define nmi_watchdog_default() do {} while (0)
#endif
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
extern int check_nmi_watchdog(void);
extern int nmi_watchdog_enabled;
-extern int unknown_nmi_panic;
extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
extern int avail_to_resrv_perfctr_nmi(unsigned int);
extern int reserve_perfctr_nmi(unsigned int);
@@ -62,12 +37,10 @@ extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
extern atomic_t nmi_active;
extern unsigned int nmi_watchdog;
-#define NMI_DISABLED -1
#define NMI_NONE 0
#define NMI_IO_APIC 1
#define NMI_LOCAL_APIC 2
#define NMI_INVALID 3
-#define NMI_DEFAULT NMI_DISABLED
struct ctl_table;
struct file;
@@ -78,6 +51,24 @@ extern int unknown_nmi_panic;
void __trigger_all_cpu_backtrace(void);
#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+static inline void localise_nmi_watchdog(void)
+{
+ if (nmi_watchdog == NMI_IO_APIC)
+ nmi_watchdog = NMI_LOCAL_APIC;
+}
+
+/* check if nmi_watchdog is active (ie was specified at boot) */
+static inline int nmi_watchdog_active(void)
+{
+ /*
+ * actually it should be:
+ * return (nmi_watchdog == NMI_LOCAL_APIC ||
+ * nmi_watchdog == NMI_IO_APIC)
+ * but since they are power of two we could use a
+ * cheaper way --cvg
+ */
+ return nmi_watchdog & 0x3;
+}
#endif
void lapic_watchdog_stop(void);
diff --git a/include/asm-x86/numa_32.h b/include/asm-x86/numa_32.h
index 03d0f7a9bf0..220d7b7707a 100644
--- a/include/asm-x86/numa_32.h
+++ b/include/asm-x86/numa_32.h
@@ -2,14 +2,10 @@
#define _ASM_X86_32_NUMA_H 1
extern int pxm_to_nid(int pxm);
+extern void numa_remove_cpu(int cpu);
#ifdef CONFIG_NUMA
-extern void __init remap_numa_kva(void);
-extern void set_highmem_pages_init(int);
-#else
-static inline void remap_numa_kva(void)
-{
-}
+extern void set_highmem_pages_init(void);
#endif
#endif /* _ASM_X86_32_NUMA_H */
diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h
index 22e87c9f6a8..3830094434a 100644
--- a/include/asm-x86/numa_64.h
+++ b/include/asm-x86/numa_64.h
@@ -14,32 +14,30 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks,
#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
-extern void numa_add_cpu(int cpu);
extern void numa_init_array(void);
extern int numa_off;
-extern void numa_set_node(int cpu, int node);
extern void srat_reserve_add_area(int nodeid);
extern int hotadd_percent;
extern s16 apicid_to_node[MAX_LOCAL_APIC];
-extern void numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn);
extern unsigned long numa_free_all_bootmem(void);
extern void setup_node_bootmem(int nodeid, unsigned long start,
unsigned long end);
#ifdef CONFIG_NUMA
extern void __init init_cpu_to_node(void);
-
-static inline void clear_node_cpumask(int cpu)
-{
- clear_bit(cpu, (unsigned long *)&node_to_cpumask_map[cpu_to_node(cpu)]);
-}
-
+extern void __cpuinit numa_set_node(int cpu, int node);
+extern void __cpuinit numa_clear_node(int cpu);
+extern void __cpuinit numa_add_cpu(int cpu);
+extern void __cpuinit numa_remove_cpu(int cpu);
#else
-#define init_cpu_to_node() do {} while (0)
-#define clear_node_cpumask(cpu) do {} while (0)
+static inline void init_cpu_to_node(void) { }
+static inline void numa_set_node(int cpu, int node) { }
+static inline void numa_clear_node(int cpu) { }
+static inline void numa_add_cpu(int cpu, int node) { }
+static inline void numa_remove_cpu(int cpu) { }
#endif
#endif
diff --git a/include/asm-x86/numaq.h b/include/asm-x86/numaq.h
index 94b86c31239..34b92d581fa 100644
--- a/include/asm-x86/numaq.h
+++ b/include/asm-x86/numaq.h
@@ -28,6 +28,7 @@
#ifdef CONFIG_X86_NUMAQ
+extern int found_numaq;
extern int get_memcfg_numaq(void);
/*
@@ -156,9 +157,12 @@ struct sys_cfg_data {
struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
};
-static inline unsigned long *get_zholes_size(int nid)
+void numaq_tsc_disable(void);
+
+#else
+static inline int get_memcfg_numaq(void)
{
- return NULL;
+ return 0;
}
#endif /* CONFIG_X86_NUMAQ */
#endif /* NUMAQ_H */
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index dc936dddf16..28d7b4533b1 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -51,9 +51,17 @@
#ifndef __ASSEMBLY__
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pgprotval_t pgprot; } pgprot_t;
+
extern int page_is_ram(unsigned long pagenr);
extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+ pgprot_t vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+ pgprot_t vma_prot);
+extern unsigned long max_low_pfn_mapped;
extern unsigned long max_pfn_mapped;
struct page;
@@ -74,9 +82,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
static inline pgd_t native_make_pgd(pgdval_t val)
{
return (pgd_t) { val };
@@ -160,6 +165,7 @@ static inline pteval_t native_pte_val(pte_t pte)
#endif
#define pte_val(x) native_pte_val(x)
+#define pte_flags(x) native_pte_val(x)
#define __pte(x) native_make_pte(x)
#endif /* CONFIG_PARAVIRT */
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index ccf0ba3c3ab..ab8528793f0 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -13,6 +13,14 @@
*/
#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
+#ifdef CONFIG_4KSTACKS
+#define THREAD_ORDER 0
+#else
+#define THREAD_ORDER 1
+#endif
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+
+
#ifdef CONFIG_X86_PAE
/* 44=32+12, the limit we can fit into an unsigned long pfn */
#define __PHYSICAL_MASK_SHIFT 44
@@ -84,6 +92,13 @@ extern int sysctl_legacy_va_layout;
#define VMALLOC_RESERVE ((unsigned long)__VMALLOC_RESERVE)
#define MAXMEM (-__PAGE_OFFSET - __VMALLOC_RESERVE)
+extern void find_low_pfn_range(void);
+extern unsigned long init_memory_mapping(unsigned long start,
+ unsigned long end);
+extern void initmem_init(unsigned long, unsigned long);
+extern void setup_bootmem_allocator(void);
+
+
#ifdef CONFIG_X86_USE_3DNOW
#include <asm/mmx.h>
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index 6ea72859c49..c6916c83e6b 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -26,7 +26,13 @@
#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))
-#define __PAGE_OFFSET _AC(0xffff810000000000, UL)
+/*
+ * Set __PAGE_OFFSET to the most negative possible address +
+ * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a
+ * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's
+ * what Xen requires.
+ */
+#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
#define __PHYSICAL_START CONFIG_PHYSICAL_START
#define __KERNEL_ALIGN 0x200000
@@ -58,7 +64,8 @@
void clear_page(void *page);
void copy_page(void *to, void *from);
-extern unsigned long end_pfn;
+/* duplicated to the one in bootmem.h */
+extern unsigned long max_pfn;
extern unsigned long phys_base;
extern unsigned long __phys_addr(unsigned long);
@@ -83,10 +90,15 @@ typedef struct { pteval_t pte; } pte_t;
extern unsigned long init_memory_mapping(unsigned long start,
unsigned long end);
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+
+extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) < end_pfn)
+#define pfn_valid(pfn) ((pfn) < max_pfn)
#endif
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index 0f13b945e24..ef5e8ec6a6a 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -84,7 +84,7 @@ struct pv_time_ops {
int (*set_wallclock)(unsigned long);
unsigned long long (*sched_clock)(void);
- unsigned long (*get_cpu_khz)(void);
+ unsigned long (*get_tsc_khz)(void);
};
struct pv_cpu_ops {
@@ -115,6 +115,9 @@ struct pv_cpu_ops {
void (*set_ldt)(const void *desc, unsigned entries);
unsigned long (*store_tr)(void);
void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+ void (*load_gs_index)(unsigned int idx);
+#endif
void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
const void *desc);
void (*write_gdt_entry)(struct desc_struct *,
@@ -141,8 +144,32 @@ struct pv_cpu_ops {
u64 (*read_pmc)(int counter);
unsigned long long (*read_tscp)(unsigned int *aux);
- /* These two are jmp to, not actually called. */
- void (*irq_enable_syscall_ret)(void);
+ /*
+ * Atomically enable interrupts and return to userspace. This
+ * is only ever used to return to 32-bit processes; in a
+ * 64-bit kernel, it's used for 32-on-64 compat processes, but
+ * never native 64-bit processes. (Jump, not call.)
+ */
+ void (*irq_enable_sysexit)(void);
+
+ /*
+ * Switch to usermode gs and return to 64-bit usermode using
+ * sysret. Only used in 64-bit kernels to return to 64-bit
+ * processes. Usermode register state, including %rsp, must
+ * already be restored.
+ */
+ void (*usergs_sysret64)(void);
+
+ /*
+ * Switch to usermode gs and return to 32-bit usermode using
+ * sysret. Used to return to 32-on-64 compat processes.
+ * Other usermode register state, including %esp, must already
+ * be restored.
+ */
+ void (*usergs_sysret32)(void);
+
+ /* Normal iret. Jump to this with the standard iret stack
+ frame set up. */
void (*iret)(void);
void (*swapgs)(void);
@@ -165,6 +192,10 @@ struct pv_irq_ops {
void (*irq_enable)(void);
void (*safe_halt)(void);
void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+ void (*adjust_exception_frame)(void);
+#endif
};
struct pv_apic_ops {
@@ -219,7 +250,14 @@ struct pv_mmu_ops {
void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm,
unsigned long va);
- /* Hooks for allocating/releasing pagetable pages */
+ /* Hooks for allocating and freeing a pagetable top-level */
+ int (*pgd_alloc)(struct mm_struct *mm);
+ void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+ /*
+ * Hooks for allocating/releasing pagetable pages when they're
+ * attached to a pagetable
+ */
void (*alloc_pte)(struct mm_struct *mm, u32 pfn);
void (*alloc_pmd)(struct mm_struct *mm, u32 pfn);
void (*alloc_pmd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
@@ -238,7 +276,13 @@ struct pv_mmu_ops {
void (*pte_update_defer)(struct mm_struct *mm,
unsigned long addr, pte_t *ptep);
+ pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+ void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte);
+
pteval_t (*pte_val)(pte_t);
+ pteval_t (*pte_flags)(pte_t);
pte_t (*make_pte)(pteval_t pte);
pgdval_t (*pgd_val)(pgd_t);
@@ -273,6 +317,13 @@ struct pv_mmu_ops {
#endif
struct pv_lazy_ops lazy_mode;
+
+ /* dom0 ops */
+
+ /* Sometimes the physical address is a pfn, and sometimes its
+ an mfn. We can tell which is which from the index. */
+ void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+ unsigned long phys, pgprot_t flags);
};
/* This contains all the paravirt structures: we get a convenient
@@ -439,10 +490,17 @@ int paravirt_disable_iospace(void);
#define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11"
#endif
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op) BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op) ((void)op)
+#endif
+
#define __PVOP_CALL(rettype, op, pre, post, ...) \
({ \
rettype __ret; \
PVOP_CALL_ARGS; \
+ PVOP_TEST_NULL(op); \
/* This is 32-bit specific, but is okay in 64-bit */ \
/* since this condition will never hold */ \
if (sizeof(rettype) > sizeof(unsigned long)) { \
@@ -471,6 +529,7 @@ int paravirt_disable_iospace(void);
#define __PVOP_VCALL(op, pre, post, ...) \
({ \
PVOP_VCALL_ARGS; \
+ PVOP_TEST_NULL(op); \
asm volatile(pre \
paravirt_alt(PARAVIRT_CALL) \
post \
@@ -720,7 +779,7 @@ static inline unsigned long long paravirt_sched_clock(void)
{
return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
}
-#define calculate_cpu_khz() (pv_time_ops.get_cpu_khz())
+#define calibrate_tsc() (pv_time_ops.get_tsc_khz())
static inline unsigned long long paravirt_read_pmc(int counter)
{
@@ -789,6 +848,13 @@ static inline void load_TLS(struct thread_struct *t, unsigned cpu)
PVOP_VCALL2(pv_cpu_ops.load_tls, t, cpu);
}
+#ifdef CONFIG_X86_64
+static inline void load_gs_index(unsigned int gs)
+{
+ PVOP_VCALL1(pv_cpu_ops.load_gs_index, gs);
+}
+#endif
+
static inline void write_ldt_entry(struct desc_struct *dt, int entry,
const void *desc)
{
@@ -912,6 +978,16 @@ static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
}
+static inline int paravirt_pgd_alloc(struct mm_struct *mm)
+{
+ return PVOP_CALL1(int, pv_mmu_ops.pgd_alloc, mm);
+}
+
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ PVOP_VCALL2(pv_mmu_ops.pgd_free, mm, pgd);
+}
+
static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned pfn)
{
PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
@@ -996,6 +1072,20 @@ static inline pteval_t pte_val(pte_t pte)
return ret;
}
+static inline pteval_t pte_flags(pte_t pte)
+{
+ pteval_t ret;
+
+ if (sizeof(pteval_t) > sizeof(long))
+ ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
+ pte.pte, (u64)pte.pte >> 32);
+ else
+ ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
+ pte.pte);
+
+ return ret;
+}
+
static inline pgd_t __pgd(pgdval_t val)
{
pgdval_t ret;
@@ -1024,6 +1114,29 @@ static inline pgdval_t pgd_val(pgd_t pgd)
return ret;
}
+#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pteval_t ret;
+
+ ret = PVOP_CALL3(pteval_t, pv_mmu_ops.ptep_modify_prot_start,
+ mm, addr, ptep);
+
+ return (pte_t) { .pte = ret };
+}
+
+static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ if (sizeof(pteval_t) > sizeof(long))
+ /* 5 arg words */
+ pv_mmu_ops.ptep_modify_prot_commit(mm, addr, ptep, pte);
+ else
+ PVOP_VCALL4(pv_mmu_ops.ptep_modify_prot_commit,
+ mm, addr, ptep, pte.pte);
+}
+
static inline void set_pte(pte_t *ptep, pte_t pte)
{
if (sizeof(pteval_t) > sizeof(long))
@@ -1252,6 +1365,12 @@ static inline void arch_flush_lazy_mmu_mode(void)
}
}
+static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
+ unsigned long phys, pgprot_t flags)
+{
+ pv_mmu_ops.set_fixmap(idx, phys, flags);
+}
+
void _paravirt_nop(void);
#define paravirt_nop ((void *)_paravirt_nop)
@@ -1374,54 +1493,86 @@ static inline unsigned long __raw_local_irq_save(void)
#define PV_RESTORE_REGS popq %rdx; popq %rcx; popq %rdi; popq %rax
#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 8)
#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
+#define PARA_INDIRECT(addr) *addr(%rip)
#else
#define PV_SAVE_REGS pushl %eax; pushl %edi; pushl %ecx; pushl %edx
#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 4)
#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
+#define PARA_INDIRECT(addr) *%cs:addr
#endif
#define INTERRUPT_RETURN \
PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE, \
- jmp *%cs:pv_cpu_ops+PV_CPU_iret)
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
#define DISABLE_INTERRUPTS(clobbers) \
PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
- PV_SAVE_REGS; \
- call *%cs:pv_irq_ops+PV_IRQ_irq_disable; \
+ PV_SAVE_REGS; \
+ call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable); \
PV_RESTORE_REGS;) \
#define ENABLE_INTERRUPTS(clobbers) \
PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers, \
- PV_SAVE_REGS; \
- call *%cs:pv_irq_ops+PV_IRQ_irq_enable; \
+ PV_SAVE_REGS; \
+ call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable); \
PV_RESTORE_REGS;)
-#define ENABLE_INTERRUPTS_SYSCALL_RET \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_syscall_ret),\
+#define USERGS_SYSRET32 \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32), \
CLBR_NONE, \
- jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_syscall_ret)
-
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret32))
#ifdef CONFIG_X86_32
-#define GET_CR0_INTO_EAX \
- push %ecx; push %edx; \
- call *pv_cpu_ops+PV_CPU_read_cr0; \
+#define GET_CR0_INTO_EAX \
+ push %ecx; push %edx; \
+ call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0); \
pop %edx; pop %ecx
-#else
+
+#define ENABLE_INTERRUPTS_SYSEXIT \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit), \
+ CLBR_NONE, \
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+
+
+#else /* !CONFIG_X86_32 */
+
+/*
+ * If swapgs is used while the userspace stack is still current,
+ * there's no way to call a pvop. The PV replacement *must* be
+ * inlined, or the swapgs instruction must be trapped and emulated.
+ */
+#define SWAPGS_UNSAFE_STACK \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
+ swapgs)
+
#define SWAPGS \
PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
PV_SAVE_REGS; \
- call *pv_cpu_ops+PV_CPU_swapgs; \
+ call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs); \
PV_RESTORE_REGS \
)
-#define GET_CR2_INTO_RCX \
- call *pv_mmu_ops+PV_MMU_read_cr2; \
- movq %rax, %rcx; \
+#define GET_CR2_INTO_RCX \
+ call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2); \
+ movq %rax, %rcx; \
xorq %rax, %rax;
-#endif
+#define PARAVIRT_ADJUST_EXCEPTION_FRAME \
+ PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_adjust_exception_frame), \
+ CLBR_NONE, \
+ call PARA_INDIRECT(pv_irq_ops+PV_IRQ_adjust_exception_frame))
+
+#define USERGS_SYSRET64 \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64), \
+ CLBR_NONE, \
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
+
+#define ENABLE_INTERRUPTS_SYSEXIT32 \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit), \
+ CLBR_NONE, \
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+#endif /* CONFIG_X86_32 */
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h
index 88f60cc6a22..7edc4730721 100644
--- a/include/asm-x86/pat.h
+++ b/include/asm-x86/pat.h
@@ -1,14 +1,13 @@
-
#ifndef _ASM_PAT_H
-#define _ASM_PAT_H 1
+#define _ASM_PAT_H
#include <linux/types.h>
#ifdef CONFIG_X86_PAT
-extern int pat_wc_enabled;
+extern int pat_enabled;
extern void validate_pat_support(struct cpuinfo_x86 *c);
#else
-static const int pat_wc_enabled = 0;
+static const int pat_enabled;
static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
#endif
@@ -21,4 +20,3 @@ extern int free_memtype(u64 start, u64 end);
extern void pat_disable(char *reason);
#endif
-
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
index 5b21485be57..80c775d9fe2 100644
--- a/include/asm-x86/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
@@ -11,7 +11,11 @@ extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
+extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
extern int early_pci_allowed(void);
+extern unsigned int pci_early_dump_regs;
+extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
+extern void early_dump_pci_devices(void);
#endif
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
index 30bbde0cb34..2db14cf17db 100644
--- a/include/asm-x86/pci.h
+++ b/include/asm-x86/pci.h
@@ -18,6 +18,8 @@ struct pci_sysdata {
#endif
};
+extern int pci_routeirq;
+
/* scan a bus after allocating a pci_sysdata for it */
extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
int node);
diff --git a/include/asm-x86/pci_32.h b/include/asm-x86/pci_32.h
index 8c4c3a0368e..a50d4685128 100644
--- a/include/asm-x86/pci_32.h
+++ b/include/asm-x86/pci_32.h
@@ -18,12 +18,14 @@ struct pci_dev;
#define PCI_DMA_BUS_IS_PHYS (1)
/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME[0];
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0];
+#define pci_unmap_addr(PTR, ADDR_NAME) sizeof((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
+#define pci_unmap_len(PTR, LEN_NAME) sizeof((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ do { break; } while (pci_unmap_len(PTR, LEN_NAME))
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h
index 101fb9e1195..b34e9a7cc80 100644
--- a/include/asm-x86/pda.h
+++ b/include/asm-x86/pda.h
@@ -22,6 +22,8 @@ struct x8664_pda {
offset 40!!! */
#endif
char *irqstackptr;
+ short nodenumber; /* number of current node (32k max) */
+ short in_bootmem; /* pda lives in bootmem */
unsigned int __softirq_pending;
unsigned int __nmi_count; /* number of NMI on this CPUs */
short mmu_state;
@@ -37,8 +39,7 @@ struct x8664_pda {
unsigned irq_spurious_count;
} ____cacheline_aligned_in_smp;
-extern struct x8664_pda *_cpu_pda[];
-extern struct x8664_pda boot_cpu_pda[];
+extern struct x8664_pda **_cpu_pda;
extern void pda_init(int);
#define cpu_pda(i) (_cpu_pda[i])
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
index 736fc3bb8e1..912a3a17b9d 100644
--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -143,4 +143,50 @@ do { \
#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
#endif /* !__ASSEMBLY__ */
#endif /* !CONFIG_X86_64 */
+
+#ifdef CONFIG_SMP
+
+/*
+ * Define the "EARLY_PER_CPU" macros. These are used for some per_cpu
+ * variables that are initialized and accessed before there are per_cpu
+ * areas allocated.
+ */
+
+#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
+ DEFINE_PER_CPU(_type, _name) = _initvalue; \
+ __typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
+ { [0 ... NR_CPUS-1] = _initvalue }; \
+ __typeof__(_type) *_name##_early_ptr = _name##_early_map
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
+ EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name) \
+ DECLARE_PER_CPU(_type, _name); \
+ extern __typeof__(_type) *_name##_early_ptr; \
+ extern __typeof__(_type) _name##_early_map[]
+
+#define early_per_cpu_ptr(_name) (_name##_early_ptr)
+#define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
+#define early_per_cpu(_name, _cpu) \
+ (early_per_cpu_ptr(_name) ? \
+ early_per_cpu_ptr(_name)[_cpu] : \
+ per_cpu(_name, _cpu))
+
+#else /* !CONFIG_SMP */
+#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
+ DEFINE_PER_CPU(_type, _name) = _initvalue
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
+ EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name) \
+ DECLARE_PER_CPU(_type, _name)
+
+#define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
+#define early_per_cpu_ptr(_name) NULL
+/* no early_per_cpu_map() */
+
+#endif /* !CONFIG_SMP */
+
#endif /* _ASM_X86_PERCPU_H_ */
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
index 91e4641f3f3..d63ea431cb3 100644
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -5,9 +5,13 @@
#include <linux/mm.h> /* for struct page */
#include <linux/pagemap.h>
+static inline int __paravirt_pgd_alloc(struct mm_struct *mm) { return 0; }
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
+#define paravirt_pgd_alloc(mm) __paravirt_pgd_alloc(mm)
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd) {}
static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn) {}
static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn) {}
static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 97c271b2910..49cbd76b954 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -20,30 +20,25 @@
#define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */
#define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */
-/*
- * Note: we use _AC(1, L) instead of _AC(1, UL) so that we get a
- * sign-extended value on 32-bit with all 1's in the upper word,
- * which preserves the upper pte values on 64-bit ptes:
- */
-#define _PAGE_PRESENT (_AC(1, L)<<_PAGE_BIT_PRESENT)
-#define _PAGE_RW (_AC(1, L)<<_PAGE_BIT_RW)
-#define _PAGE_USER (_AC(1, L)<<_PAGE_BIT_USER)
-#define _PAGE_PWT (_AC(1, L)<<_PAGE_BIT_PWT)
-#define _PAGE_PCD (_AC(1, L)<<_PAGE_BIT_PCD)
-#define _PAGE_ACCESSED (_AC(1, L)<<_PAGE_BIT_ACCESSED)
-#define _PAGE_DIRTY (_AC(1, L)<<_PAGE_BIT_DIRTY)
-#define _PAGE_PSE (_AC(1, L)<<_PAGE_BIT_PSE) /* 2MB page */
-#define _PAGE_GLOBAL (_AC(1, L)<<_PAGE_BIT_GLOBAL) /* Global TLB entry */
-#define _PAGE_UNUSED1 (_AC(1, L)<<_PAGE_BIT_UNUSED1)
-#define _PAGE_UNUSED2 (_AC(1, L)<<_PAGE_BIT_UNUSED2)
-#define _PAGE_UNUSED3 (_AC(1, L)<<_PAGE_BIT_UNUSED3)
-#define _PAGE_PAT (_AC(1, L)<<_PAGE_BIT_PAT)
-#define _PAGE_PAT_LARGE (_AC(1, L)<<_PAGE_BIT_PAT_LARGE)
+#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
+#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW)
+#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER)
+#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT)
+#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD)
+#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
+#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
+#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE)
+#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
+#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
+#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2)
+#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
+#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)
+#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-#define _PAGE_NX (_AC(1, ULL) << _PAGE_BIT_NX)
+#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX)
#else
-#define _PAGE_NX 0
+#define _PAGE_NX (_AT(pteval_t, 0))
#endif
/* If _PAGE_PRESENT is clear, we use these: */
@@ -83,19 +78,9 @@
#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
_PAGE_ACCESSED)
-#ifdef CONFIG_X86_32
-#define _PAGE_KERNEL_EXEC \
- (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
-#define _PAGE_KERNEL (_PAGE_KERNEL_EXEC | _PAGE_NX)
-
-#ifndef __ASSEMBLY__
-extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
-#endif /* __ASSEMBLY__ */
-#else
#define __PAGE_KERNEL_EXEC \
- (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+ (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
#define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX)
-#endif
#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW)
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
@@ -106,26 +91,22 @@ extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_NOCACHE (__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
-#ifdef CONFIG_X86_32
-# define MAKE_GLOBAL(x) __pgprot((x))
-#else
-# define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
-#endif
-
-#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
-#define PAGE_KERNEL_RX MAKE_GLOBAL(__PAGE_KERNEL_RX)
-#define PAGE_KERNEL_WC MAKE_GLOBAL(__PAGE_KERNEL_WC)
-#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
-#define PAGE_KERNEL_UC_MINUS MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
-#define PAGE_KERNEL_EXEC_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
-#define PAGE_KERNEL_LARGE MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
-#define PAGE_KERNEL_LARGE_EXEC MAKE_GLOBAL(__PAGE_KERNEL_LARGE_EXEC)
-#define PAGE_KERNEL_VSYSCALL MAKE_GLOBAL(__PAGE_KERNEL_VSYSCALL)
-#define PAGE_KERNEL_VSYSCALL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RX __pgprot(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC __pgprot(__PAGE_KERNEL_WC)
+#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS __pgprot(__PAGE_KERNEL_UC_MINUS)
+#define PAGE_KERNEL_EXEC_NOCACHE __pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
+#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_NOCACHE __pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE __pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
/* xwr */
#define __P000 PAGE_NONE
@@ -164,37 +145,37 @@ extern struct list_head pgd_list;
*/
static inline int pte_dirty(pte_t pte)
{
- return pte_val(pte) & _PAGE_DIRTY;
+ return pte_flags(pte) & _PAGE_DIRTY;
}
static inline int pte_young(pte_t pte)
{
- return pte_val(pte) & _PAGE_ACCESSED;
+ return pte_flags(pte) & _PAGE_ACCESSED;
}
static inline int pte_write(pte_t pte)
{
- return pte_val(pte) & _PAGE_RW;
+ return pte_flags(pte) & _PAGE_RW;
}
static inline int pte_file(pte_t pte)
{
- return pte_val(pte) & _PAGE_FILE;
+ return pte_flags(pte) & _PAGE_FILE;
}
static inline int pte_huge(pte_t pte)
{
- return pte_val(pte) & _PAGE_PSE;
+ return pte_flags(pte) & _PAGE_PSE;
}
static inline int pte_global(pte_t pte)
{
- return pte_val(pte) & _PAGE_GLOBAL;
+ return pte_flags(pte) & _PAGE_GLOBAL;
}
static inline int pte_exec(pte_t pte)
{
- return !(pte_val(pte) & _PAGE_NX);
+ return !(pte_flags(pte) & _PAGE_NX);
}
static inline int pte_special(pte_t pte)
@@ -210,22 +191,22 @@ static inline int pmd_large(pmd_t pte)
static inline pte_t pte_mkclean(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY);
+ return __pte(pte_val(pte) & ~_PAGE_DIRTY);
}
static inline pte_t pte_mkold(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED);
+ return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
}
static inline pte_t pte_wrprotect(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW);
+ return __pte(pte_val(pte) & ~_PAGE_RW);
}
static inline pte_t pte_mkexec(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX);
+ return __pte(pte_val(pte) & ~_PAGE_NX);
}
static inline pte_t pte_mkdirty(pte_t pte)
@@ -250,7 +231,7 @@ static inline pte_t pte_mkhuge(pte_t pte)
static inline pte_t pte_clrhuge(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE);
+ return __pte(pte_val(pte) & ~_PAGE_PSE);
}
static inline pte_t pte_mkglobal(pte_t pte)
@@ -260,7 +241,7 @@ static inline pte_t pte_mkglobal(pte_t pte)
static inline pte_t pte_clrglobal(pte_t pte)
{
- return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL);
+ return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
}
static inline pte_t pte_mkspecial(pte_t pte)
@@ -305,7 +286,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
return __pgprot(preservebits | addbits);
}
-#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK)
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
@@ -318,6 +299,9 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot);
#endif
+/* Install a pte for a particular vaddr in kernel space. */
+void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else /* !CONFIG_PARAVIRT */
@@ -359,6 +343,26 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
# include "pgtable_64.h"
#endif
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
+
+
#define KERNEL_PGD_BOUNDARY pgd_index(PAGE_OFFSET)
#define KERNEL_PGD_PTRS (PTRS_PER_PGD - KERNEL_PGD_BOUNDARY)
@@ -369,8 +373,15 @@ enum {
PG_LEVEL_4K,
PG_LEVEL_2M,
PG_LEVEL_1G,
+ PG_LEVEL_NUM
};
+#ifdef CONFIG_PROC_FS
+extern void update_page_count(int level, unsigned long pages);
+#else
+static inline void update_page_count(int level, unsigned long pages) { }
+#endif
+
/*
* Helper function that returns the kernel pagetable entry controlling
* the virtual address 'address'. NULL means no pagetable entry present.
@@ -420,6 +431,8 @@ static inline void native_set_pte_at(struct mm_struct *mm, unsigned long addr,
* race with other CPU's that might be updating the dirty
* bit at the same time.
*/
+struct vm_area_struct;
+
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
extern int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep,
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 32ca03109a4..ec871c420d7 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -113,26 +113,6 @@ extern unsigned long pg0[];
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-/*
- * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
- *
- * this macro returns the index of the entry in the pgd page which would
- * control the given virtual address
- */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-#define pgd_index_k(addr) pgd_index((addr))
-
-/*
- * pgd_offset() returns a (pgd_t *)
- * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
- */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
-
-/*
- * a shortcut which implies the use of the kernel's pgd, instead
- * of a process's
- */
-#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
static inline int pud_large(pud_t pud) { return 0; }
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index 1cc50d22d73..fa7208b483c 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -70,6 +70,9 @@ extern void paging_init(void);
struct mm_struct;
+void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
+
+
static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
@@ -190,12 +193,9 @@ static inline int pmd_bad(pmd_t pmd)
#define pgd_page_vaddr(pgd) \
((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_MASK))
#define pgd_page(pgd) (pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
-#define pgd_offset_k(address) (init_level4_pgt + pgd_index((address)))
#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
static inline int pgd_large(pgd_t pgd) { return 0; }
-#define mk_kernel_pgd(address) ((pgd_t){ (address) | _KERNPG_TABLE })
+#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
/* PUD - Level3 access */
/* to find an entry in a page-table-directory. */
diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
index 199cab107d8..092b39b3a7e 100644
--- a/include/asm-x86/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
@@ -88,4 +88,10 @@
#define CX86_ARR_BASE 0xc4
#define CX86_RCR_BASE 0xdc
+#ifdef CONFIG_VM86
+#define X86_VM_MASK X86_EFLAGS_VM
+#else
+#define X86_VM_MASK 0 /* No VM86 support */
+#endif
+
#endif /* __ASM_I386_PROCESSOR_FLAGS_H */
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index 559105220a4..55402d2ab93 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -153,7 +153,7 @@ static inline int hlt_works(int cpu)
extern void cpu_detect(struct cpuinfo_x86 *c);
-extern void identify_cpu(struct cpuinfo_x86 *);
+extern void early_cpu_init(void);
extern void identify_boot_cpu(void);
extern void identify_secondary_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
@@ -263,15 +263,11 @@ struct tss_struct {
struct thread_struct *io_bitmap_owner;
/*
- * Pad the TSS to be cacheline-aligned (size is 0x100):
- */
- unsigned long __cacheline_filler[35];
- /*
* .. and then another 0x100 bytes for the emergency kernel stack:
*/
unsigned long stack[64];
-} __attribute__((packed));
+} ____cacheline_aligned;
DECLARE_PER_CPU(struct tss_struct, init_tss);
@@ -535,7 +531,6 @@ static inline void load_sp0(struct tss_struct *tss,
}
#define set_iopl_mask native_set_iopl_mask
-#define SWAPGS swapgs
#endif /* CONFIG_PARAVIRT */
/*
@@ -732,6 +727,8 @@ extern int force_mwait;
extern void select_idle_routine(const struct cpuinfo_x86 *c);
extern unsigned long boot_option_idle_override;
+extern unsigned long idle_halt;
+extern unsigned long idle_nomwait;
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h
index 6c8b41b03f6..3dd458c385c 100644
--- a/include/asm-x86/proto.h
+++ b/include/asm-x86/proto.h
@@ -14,8 +14,6 @@ extern void ia32_syscall(void);
extern void ia32_cstar_target(void);
extern void ia32_sysenter_target(void);
-extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
-
extern void syscall32_cpu_init(void);
extern void check_efer(void);
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index 9f922b0b95d..8a71db803da 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -3,7 +3,12 @@
#include <linux/compiler.h> /* For __user */
#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+#ifdef __KERNEL__
+#include <asm/ds.h> /* the DS BTS struct is used for ptrace too */
+#include <asm/segment.h>
+#endif
#ifndef __ASSEMBLY__
@@ -55,9 +60,6 @@ struct pt_regs {
unsigned long ss;
};
-#include <asm/vm86.h>
-#include <asm/segment.h>
-
#endif /* __KERNEL__ */
#else /* __i386__ */
diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h
index e63741f1939..206f355786d 100644
--- a/include/asm-x86/reboot.h
+++ b/include/asm-x86/reboot.h
@@ -14,8 +14,8 @@ struct machine_ops {
extern struct machine_ops machine_ops;
-void machine_real_restart(unsigned char *code, int length);
void native_machine_crash_shutdown(struct pt_regs *regs);
void native_machine_shutdown(void);
+void machine_real_restart(const unsigned char *code, int length);
#endif /* _ASM_REBOOT_H */
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
index 7400d3ad75c..adec887dd7c 100644
--- a/include/asm-x86/required-features.h
+++ b/include/asm-x86/required-features.h
@@ -19,9 +19,13 @@
#if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
# define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
-# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
#else
# define NEED_PAE 0
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#else
# define NEED_CX8 0
#endif
@@ -38,7 +42,7 @@
#endif
#ifdef CONFIG_X86_64
-#define NEED_PSE (1<<(X86_FEATURE_PSE & 31))
+#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h
index 2557514d7ef..8d9f0b41ee8 100644
--- a/include/asm-x86/resume-trace.h
+++ b/include/asm-x86/resume-trace.h
@@ -6,7 +6,7 @@
#define TRACE_RESUME(user) \
do { \
if (pm_trace_enabled) { \
- void *tracedata; \
+ const void *tracedata; \
asm volatile(_ASM_MOV_UL " $1f,%0\n" \
".section .tracedata,\"a\"\n" \
"1:\t.word %c1\n\t" \
diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h
index 18da19e89bf..36e71c5f306 100644
--- a/include/asm-x86/seccomp_32.h
+++ b/include/asm-x86/seccomp_32.h
@@ -1,4 +1,5 @@
#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
#include <linux/thread_info.h>
diff --git a/include/asm-x86/seccomp_64.h b/include/asm-x86/seccomp_64.h
index 553af65a228..76cfe69aa63 100644
--- a/include/asm-x86/seccomp_64.h
+++ b/include/asm-x86/seccomp_64.h
@@ -1,4 +1,5 @@
#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
#include <linux/thread_info.h>
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
index ed5131dd7d9..dfc8601c089 100644
--- a/include/asm-x86/segment.h
+++ b/include/asm-x86/segment.h
@@ -61,18 +61,14 @@
#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
#define GDT_ENTRY_DEFAULT_USER_CS 14
-#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3)
#define GDT_ENTRY_DEFAULT_USER_DS 15
-#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3)
#define GDT_ENTRY_KERNEL_BASE 12
#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0)
-#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1)
-#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4)
#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5)
@@ -139,10 +135,11 @@
#else
#include <asm/cache.h>
-#define __KERNEL_CS 0x10
-#define __KERNEL_DS 0x18
+#define GDT_ENTRY_KERNEL32_CS 1
+#define GDT_ENTRY_KERNEL_CS 2
+#define GDT_ENTRY_KERNEL_DS 3
-#define __KERNEL32_CS 0x08
+#define __KERNEL32_CS (GDT_ENTRY_KERNEL32_CS * 8)
/*
* we cannot use the same code segment descriptor for user and kernel
@@ -150,10 +147,10 @@
* The segment offset needs to contain a RPL. Grr. -AK
* GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
*/
-
-#define __USER32_CS 0x23 /* 4*8+3 */
-#define __USER_DS 0x2b /* 5*8+3 */
-#define __USER_CS 0x33 /* 6*8+3 */
+#define GDT_ENTRY_DEFAULT_USER32_CS 4
+#define GDT_ENTRY_DEFAULT_USER_DS 5
+#define GDT_ENTRY_DEFAULT_USER_CS 6
+#define __USER32_CS (GDT_ENTRY_DEFAULT_USER32_CS * 8 + 3)
#define __USER32_DS __USER_DS
#define GDT_ENTRY_TSS 8 /* needs two entries */
@@ -175,6 +172,10 @@
#endif
+#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
+#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
+#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3)
+#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3)
#ifndef CONFIG_PARAVIRT
#define get_kernel_rpl() 0
#endif
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index fa6763af8d2..90ab2225e71 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -8,7 +8,25 @@
/* Interrupt control for vSMPowered x86_64 systems */
void vsmp_init(void);
-char *machine_specific_memory_setup(void);
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+/*
+ * Any setup quirks to be performed?
+ */
+extern int (*arch_time_init_quirk)(void);
+extern int (*arch_pre_intr_init_quirk)(void);
+extern int (*arch_intr_init_quirk)(void);
+extern int (*arch_trap_init_quirk)(void);
+extern char * (*arch_memory_setup_quirk)(void);
+extern int (*mach_get_smp_config_quirk)(unsigned int early);
+extern int (*mach_find_smp_config_quirk)(unsigned int reserve);
+
#ifndef CONFIG_PARAVIRT
#define paravirt_post_allocator_init() do {} while (0)
#endif
@@ -43,26 +61,23 @@ char *machine_specific_memory_setup(void);
*/
extern struct boot_params boot_params;
-#ifdef __i386__
/*
* Do NOT EVER look at the BIOS memory size location.
* It does not work on many machines.
*/
#define LOWMEMSIZE() (0x9f000)
-struct e820entry;
-
-char * __init machine_specific_memory_setup(void);
-char *memory_setup(void);
+#ifdef __i386__
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map);
-int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map);
-void __init add_memory_region(unsigned long long start,
- unsigned long long size, int type);
+void __init i386_start_kernel(void);
+extern void probe_roms(void);
+extern unsigned long init_pg_tables_start;
extern unsigned long init_pg_tables_end;
-
+#else
+void __init x86_64_start_kernel(char *real_mode);
+void __init x86_64_start_reservations(char *real_mode_data);
#endif /* __i386__ */
#endif /* _SETUP */
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index 1ebaa5cd311..c2784b3e0b7 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -29,21 +29,12 @@ extern int smp_num_siblings;
extern unsigned int num_processors;
extern cpumask_t cpu_initialized;
-#ifdef CONFIG_SMP
-extern u16 x86_cpu_to_apicid_init[];
-extern u16 x86_bios_cpu_apicid_init[];
-extern void *x86_cpu_to_apicid_early_ptr;
-extern void *x86_bios_cpu_apicid_early_ptr;
-#else
-#define x86_cpu_to_apicid_early_ptr NULL
-#define x86_bios_cpu_apicid_early_ptr NULL
-#endif
-
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(u16, cpu_llc_id);
-DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
-DECLARE_PER_CPU(u16, x86_bios_cpu_apicid);
+
+DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
/* Static state in head.S used to set up a CPU */
extern struct {
@@ -59,9 +50,9 @@ struct smp_ops {
void (*smp_send_stop)(void);
void (*smp_send_reschedule)(int cpu);
- int (*smp_call_function_mask)(cpumask_t mask,
- void (*func)(void *info), void *info,
- int wait);
+
+ void (*send_call_func_ipi)(cpumask_t mask);
+ void (*send_call_func_single_ipi)(int cpu);
};
/* Globals due to paravirt */
@@ -103,23 +94,26 @@ static inline void smp_send_reschedule(int cpu)
smp_ops.smp_send_reschedule(cpu);
}
-static inline int smp_call_function_mask(cpumask_t mask,
- void (*func) (void *info), void *info,
- int wait)
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+ smp_ops.send_call_func_single_ipi(cpu);
+}
+
+static inline void arch_send_call_function_ipi(cpumask_t mask)
{
- return smp_ops.smp_call_function_mask(mask, func, info, wait);
+ smp_ops.send_call_func_ipi(mask);
}
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
int native_cpu_up(unsigned int cpunum);
+void native_send_call_func_ipi(cpumask_t mask);
+void native_send_call_func_single_ipi(int cpu);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
-extern void prefill_possible_map(void);
-
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
@@ -130,6 +124,14 @@ static inline int num_booting_cpus(void)
}
#endif /* CONFIG_SMP */
+#if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_CPU)
+extern void prefill_possible_map(void);
+#else
+static inline void prefill_possible_map(void)
+{
+}
+#endif
+
extern unsigned disabled_cpus __cpuinitdata;
#ifdef CONFIG_X86_32_SMP
@@ -197,12 +199,8 @@ static inline int hard_smp_processor_id(void)
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_HOTPLUG_CPU
-extern void cpu_exit_clear(void);
extern void cpu_uninit(void);
#endif
-extern void smp_alloc_memory(void);
-extern void lock_ipi_call_lock(void);
-extern void unlock_ipi_call_lock(void);
#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/asm-x86/srat.h b/include/asm-x86/srat.h
index f4bba131d06..774c919dc23 100644
--- a/include/asm-x86/srat.h
+++ b/include/asm-x86/srat.h
@@ -27,11 +27,13 @@
#ifndef _ASM_SRAT_H_
#define _ASM_SRAT_H_
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_NUMA
extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+ return 0;
+}
+#endif
#endif /* _ASM_SRAT_H_ */
diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h
index b49369ad9a6..193578cd1fd 100644
--- a/include/asm-x86/string_32.h
+++ b/include/asm-x86/string_32.h
@@ -29,81 +29,116 @@ extern char *strchr(const char *s, int c);
#define __HAVE_ARCH_STRLEN
extern size_t strlen(const char *s);
-static __always_inline void * __memcpy(void * to, const void * from, size_t n)
+static __always_inline void *__memcpy(void *to, const void *from, size_t n)
{
-int d0, d1, d2;
-__asm__ __volatile__(
- "rep ; movsl\n\t"
- "movl %4,%%ecx\n\t"
- "andl $3,%%ecx\n\t"
- "jz 1f\n\t"
- "rep ; movsb\n\t"
- "1:"
- : "=&c" (d0), "=&D" (d1), "=&S" (d2)
- : "0" (n/4), "g" (n), "1" ((long) to), "2" ((long) from)
- : "memory");
-return (to);
+ int d0, d1, d2;
+ asm volatile("rep ; movsl\n\t"
+ "movl %4,%%ecx\n\t"
+ "andl $3,%%ecx\n\t"
+ "jz 1f\n\t"
+ "rep ; movsb\n\t"
+ "1:"
+ : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+ : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from)
+ : "memory");
+ return to;
}
/*
* This looks ugly, but the compiler can optimize it totally,
* as the count is constant.
*/
-static __always_inline void * __constant_memcpy(void * to, const void * from, size_t n)
+static __always_inline void *__constant_memcpy(void *to, const void *from,
+ size_t n)
{
long esi, edi;
- if (!n) return to;
-#if 1 /* want to do small copies with non-string ops? */
+ if (!n)
+ return to;
+
switch (n) {
- case 1: *(char*)to = *(char*)from; return to;
- case 2: *(short*)to = *(short*)from; return to;
- case 4: *(int*)to = *(int*)from; return to;
-#if 1 /* including those doable with two moves? */
- case 3: *(short*)to = *(short*)from;
- *((char*)to+2) = *((char*)from+2); return to;
- case 5: *(int*)to = *(int*)from;
- *((char*)to+4) = *((char*)from+4); return to;
- case 6: *(int*)to = *(int*)from;
- *((short*)to+2) = *((short*)from+2); return to;
- case 8: *(int*)to = *(int*)from;
- *((int*)to+1) = *((int*)from+1); return to;
-#endif
+ case 1:
+ *(char *)to = *(char *)from;
+ return to;
+ case 2:
+ *(short *)to = *(short *)from;
+ return to;
+ case 4:
+ *(int *)to = *(int *)from;
+ return to;
+
+ case 3:
+ *(short *)to = *(short *)from;
+ *((char *)to + 2) = *((char *)from + 2);
+ return to;
+ case 5:
+ *(int *)to = *(int *)from;
+ *((char *)to + 4) = *((char *)from + 4);
+ return to;
+ case 6:
+ *(int *)to = *(int *)from;
+ *((short *)to + 2) = *((short *)from + 2);
+ return to;
+ case 8:
+ *(int *)to = *(int *)from;
+ *((int *)to + 1) = *((int *)from + 1);
+ return to;
}
-#endif
- esi = (long) from;
- edi = (long) to;
- if (n >= 5*4) {
+
+ esi = (long)from;
+ edi = (long)to;
+ if (n >= 5 * 4) {
/* large block: use rep prefix */
int ecx;
- __asm__ __volatile__(
- "rep ; movsl"
- : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
- : "0" (n/4), "1" (edi),"2" (esi)
- : "memory"
+ asm volatile("rep ; movsl"
+ : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
+ : "0" (n / 4), "1" (edi), "2" (esi)
+ : "memory"
);
} else {
/* small block: don't clobber ecx + smaller code */
- if (n >= 4*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 3*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 2*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 1*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
+ if (n >= 4 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 3 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 2 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 1 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
}
switch (n % 4) {
/* tail */
- case 0: return to;
- case 1: __asm__ __volatile__("movsb"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
- case 2: __asm__ __volatile__("movsw"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
- default: __asm__ __volatile__("movsw\n\tmovsb"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
+ case 0:
+ return to;
+ case 1:
+ asm volatile("movsb"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
+ case 2:
+ asm volatile("movsw"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
+ default:
+ asm volatile("movsw\n\tmovsb"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
}
}
@@ -117,87 +152,86 @@ static __always_inline void * __constant_memcpy(void * to, const void * from, si
* This CPU favours 3DNow strongly (eg AMD Athlon)
*/
-static inline void * __constant_memcpy3d(void * to, const void * from, size_t len)
+static inline void *__constant_memcpy3d(void *to, const void *from, size_t len)
{
if (len < 512)
return __constant_memcpy(to, from, len);
return _mmx_memcpy(to, from, len);
}
-static __inline__ void *__memcpy3d(void *to, const void *from, size_t len)
+static inline void *__memcpy3d(void *to, const void *from, size_t len)
{
if (len < 512)
return __memcpy(to, from, len);
return _mmx_memcpy(to, from, len);
}
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy3d((t),(f),(n)) : \
- __memcpy3d((t),(f),(n)))
+#define memcpy(t, f, n) \
+ (__builtin_constant_p((n)) \
+ ? __constant_memcpy3d((t), (f), (n)) \
+ : __memcpy3d((t), (f), (n)))
#else
/*
* No 3D Now!
*/
-
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy((t),(f),(n)) : \
- __memcpy((t),(f),(n)))
+
+#define memcpy(t, f, n) \
+ (__builtin_constant_p((n)) \
+ ? __constant_memcpy((t), (f), (n)) \
+ : __memcpy((t), (f), (n)))
#endif
#define __HAVE_ARCH_MEMMOVE
-void *memmove(void * dest,const void * src, size_t n);
+void *memmove(void *dest, const void *src, size_t n);
#define memcmp __builtin_memcmp
#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void * cs,int c,size_t count);
+extern void *memchr(const void *cs, int c, size_t count);
-static inline void * __memset_generic(void * s, char c,size_t count)
+static inline void *__memset_generic(void *s, char c, size_t count)
{
-int d0, d1;
-__asm__ __volatile__(
- "rep\n\t"
- "stosb"
- : "=&c" (d0), "=&D" (d1)
- :"a" (c),"1" (s),"0" (count)
- :"memory");
-return s;
+ int d0, d1;
+ asm volatile("rep\n\t"
+ "stosb"
+ : "=&c" (d0), "=&D" (d1)
+ : "a" (c), "1" (s), "0" (count)
+ : "memory");
+ return s;
}
/* we might want to write optimized versions of these later */
-#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count))
+#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count))
/*
- * memset(x,0,y) is a reasonably common thing to do, so we want to fill
+ * memset(x, 0, y) is a reasonably common thing to do, so we want to fill
* things 32 bits at a time even when we don't know the size of the
* area at compile-time..
*/
-static __always_inline void * __constant_c_memset(void * s, unsigned long c, size_t count)
+static __always_inline
+void *__constant_c_memset(void *s, unsigned long c, size_t count)
{
-int d0, d1;
-__asm__ __volatile__(
- "rep ; stosl\n\t"
- "testb $2,%b3\n\t"
- "je 1f\n\t"
- "stosw\n"
- "1:\ttestb $1,%b3\n\t"
- "je 2f\n\t"
- "stosb\n"
- "2:"
- :"=&c" (d0), "=&D" (d1)
- :"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
- :"memory");
-return (s);
+ int d0, d1;
+ asm volatile("rep ; stosl\n\t"
+ "testb $2,%b3\n\t"
+ "je 1f\n\t"
+ "stosw\n"
+ "1:\ttestb $1,%b3\n\t"
+ "je 2f\n\t"
+ "stosb\n"
+ "2:"
+ : "=&c" (d0), "=&D" (d1)
+ : "a" (c), "q" (count), "0" (count/4), "1" ((long)s)
+ : "memory");
+ return s;
}
/* Added by Gertjan van Wingerde to make minix and sysv module work */
#define __HAVE_ARCH_STRNLEN
-extern size_t strnlen(const char * s, size_t count);
+extern size_t strnlen(const char *s, size_t count);
/* end of additional stuff */
#define __HAVE_ARCH_STRSTR
@@ -207,66 +241,85 @@ extern char *strstr(const char *cs, const char *ct);
* This looks horribly ugly, but the compiler can optimize it totally,
* as we by now know that both pattern and count is constant..
*/
-static __always_inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count)
+static __always_inline
+void *__constant_c_and_count_memset(void *s, unsigned long pattern,
+ size_t count)
{
switch (count) {
+ case 0:
+ return s;
+ case 1:
+ *(unsigned char *)s = pattern & 0xff;
+ return s;
+ case 2:
+ *(unsigned short *)s = pattern & 0xffff;
+ return s;
+ case 3:
+ *(unsigned short *)s = pattern & 0xffff;
+ *((unsigned char *)s + 2) = pattern & 0xff;
+ return s;
+ case 4:
+ *(unsigned long *)s = pattern;
+ return s;
+ }
+
+#define COMMON(x) \
+ asm volatile("rep ; stosl" \
+ x \
+ : "=&c" (d0), "=&D" (d1) \
+ : "a" (eax), "0" (count/4), "1" ((long)s) \
+ : "memory")
+
+ {
+ int d0, d1;
+#if __GNUC__ == 4 && __GNUC_MINOR__ == 0
+ /* Workaround for broken gcc 4.0 */
+ register unsigned long eax asm("%eax") = pattern;
+#else
+ unsigned long eax = pattern;
+#endif
+
+ switch (count % 4) {
case 0:
+ COMMON("");
return s;
case 1:
- *(unsigned char *)s = pattern & 0xff;
+ COMMON("\n\tstosb");
return s;
case 2:
- *(unsigned short *)s = pattern & 0xffff;
+ COMMON("\n\tstosw");
return s;
- case 3:
- *(unsigned short *)s = pattern & 0xffff;
- *(2+(unsigned char *)s) = pattern & 0xff;
- return s;
- case 4:
- *(unsigned long *)s = pattern;
+ default:
+ COMMON("\n\tstosw\n\tstosb");
return s;
+ }
}
-#define COMMON(x) \
-__asm__ __volatile__( \
- "rep ; stosl" \
- x \
- : "=&c" (d0), "=&D" (d1) \
- : "a" (pattern),"0" (count/4),"1" ((long) s) \
- : "memory")
-{
- int d0, d1;
- switch (count % 4) {
- case 0: COMMON(""); return s;
- case 1: COMMON("\n\tstosb"); return s;
- case 2: COMMON("\n\tstosw"); return s;
- default: COMMON("\n\tstosw\n\tstosb"); return s;
- }
-}
-
+
#undef COMMON
}
-#define __constant_c_x_memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_c_and_count_memset((s),(c),(count)) : \
- __constant_c_memset((s),(c),(count)))
+#define __constant_c_x_memset(s, c, count) \
+ (__builtin_constant_p(count) \
+ ? __constant_c_and_count_memset((s), (c), (count)) \
+ : __constant_c_memset((s), (c), (count)))
-#define __memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_count_memset((s),(c),(count)) : \
- __memset_generic((s),(c),(count)))
+#define __memset(s, c, count) \
+ (__builtin_constant_p(count) \
+ ? __constant_count_memset((s), (c), (count)) \
+ : __memset_generic((s), (c), (count)))
#define __HAVE_ARCH_MEMSET
-#define memset(s, c, count) \
-(__builtin_constant_p(c) ? \
- __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \
- __memset((s),(c),(count)))
+#define memset(s, c, count) \
+ (__builtin_constant_p(c) \
+ ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
+ (count)) \
+ : __memset((s), (c), (count)))
/*
* find the first occurrence of byte 'c', or 1 past the area if none
*/
#define __HAVE_ARCH_MEMSCAN
-extern void *memscan(void * addr, int c, size_t size);
+extern void *memscan(void *addr, int c, size_t size);
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h
index 24e1c080aa8..8675c6782a7 100644
--- a/include/asm-x86/suspend_32.h
+++ b/include/asm-x86/suspend_32.h
@@ -3,6 +3,9 @@
* Based on code
* Copyright 2001 Patrick Mochel <mochel@osdl.org>
*/
+#ifndef __ASM_X86_32_SUSPEND_H
+#define __ASM_X86_32_SUSPEND_H
+
#include <asm/desc.h>
#include <asm/i387.h>
@@ -44,3 +47,5 @@ static inline void acpi_save_register_state(unsigned long return_point)
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
#endif
+
+#endif /* __ASM_X86_32_SUSPEND_H */
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index a2f04cd79b2..983ce37c491 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -136,7 +136,7 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
-extern void load_gs_index(unsigned);
+extern void native_load_gs_index(unsigned);
/*
* Load a segment. Fall back on loading the zero
@@ -153,14 +153,14 @@ extern void load_gs_index(unsigned);
"jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(1b,3b) \
- : :"r" (value), "r" (0))
+ : :"r" (value), "r" (0) : "memory")
/*
* Save a segment register away
*/
#define savesegment(seg, value) \
- asm volatile("mov %%" #seg ",%0":"=rm" (value))
+ asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
static inline unsigned long get_limit(unsigned long segment)
{
@@ -282,6 +282,7 @@ static inline void native_wbinvd(void)
#ifdef CONFIG_X86_64
#define read_cr8() (native_read_cr8())
#define write_cr8(x) (native_write_cr8(x))
+#define load_gs_index native_load_gs_index
#endif
/* Clear the 'TS' bit */
@@ -289,7 +290,7 @@ static inline void native_wbinvd(void)
#endif/* CONFIG_PARAVIRT */
-#define stts() write_cr0(8 | read_cr0())
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
#endif /* __KERNEL__ */
@@ -303,7 +304,6 @@ static inline void clflush(volatile void *__p)
void disable_hlt(void);
void enable_hlt(void);
-extern int es7000_plat;
void cpu_idle_wait(void);
extern unsigned long arch_align_stack(unsigned long sp);
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
index 77244f17993..895339d2bc0 100644
--- a/include/asm-x86/thread_info.h
+++ b/include/asm-x86/thread_info.h
@@ -1,9 +1,253 @@
+/* thread_info.h: low-level thread information
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
#ifndef _ASM_X86_THREAD_INFO_H
+#define _ASM_X86_THREAD_INFO_H
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ */
+#ifndef __ASSEMBLY__
+struct task_struct;
+struct exec_domain;
+#include <asm/processor.h>
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 status; /* thread synchronous flags */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable,
+ <0 => BUG */
+ mm_segment_t addr_limit;
+ struct restart_block restart_block;
+ void __user *sysenter_return;
+#ifdef CONFIG_X86_32
+ unsigned long previous_esp; /* ESP of the previous stack in
+ case of nested (IRQ) stacks
+ */
+ __u8 supervisor_stack[0];
+#endif
+};
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files
+ * may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ * Warning: layout of LSW is hardcoded in entry.S
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/
+#define TIF_IRET 5 /* force IRET */
#ifdef CONFIG_X86_32
-# include "thread_info_32.h"
+#define TIF_SYSCALL_EMU 6 /* syscall emulation active */
+#endif
+#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
+#define TIF_SECCOMP 8 /* secure computing */
+#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */
+#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */
+#define TIF_NOTSC 16 /* TSC is not accessible in userland */
+#define TIF_IA32 17 /* 32bit process */
+#define TIF_FORK 18 /* ret_from_fork */
+#define TIF_ABI_PENDING 19
+#define TIF_MEMDIE 20
+#define TIF_DEBUG 21 /* uses debug registers */
+#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
+#define TIF_FREEZE 23 /* is freezing for suspend */
+#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */
+#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */
+#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */
+#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_IRET (1 << TIF_IRET)
+#ifdef CONFIG_X86_32
+#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)
#else
-# include "thread_info_64.h"
+#define _TIF_SYSCALL_EMU 0
#endif
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY)
+#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED)
+#define _TIF_NOTSC (1 << TIF_NOTSC)
+#define _TIF_IA32 (1 << TIF_IA32)
+#define _TIF_FORK (1 << TIF_FORK)
+#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING)
+#define _TIF_DEBUG (1 << TIF_DEBUG)
+#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
+#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
+#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
+#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK \
+ (0x0000FFFF & \
+ ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP| \
+ _TIF_SECCOMP|_TIF_SYSCALL_EMU))
+
+/* work to do on any return to user space */
+#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+
+/* Only used for 64 bit */
+#define _TIF_DO_NOTIFY_MASK \
+ (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED)
+
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW \
+ (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \
+ _TIF_NOTSC)
+
+#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
+#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
+#else
+#define THREAD_FLAGS GFP_KERNEL
+#endif
+
+#define alloc_thread_info(tsk) \
+ ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
+
+#ifdef CONFIG_X86_32
+
+#define STACK_WARN (THREAD_SIZE/8)
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("esp") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ return (struct thread_info *)
+ (current_stack_pointer & ~(THREAD_SIZE - 1));
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+ movl $-THREAD_SIZE, reg; \
+ andl %esp, reg
+
+/* use this one if reg already contains %esp */
+#define GET_THREAD_INFO_WITH_ESP(reg) \
+ andl $-THREAD_SIZE, reg
+
+#endif
+
+#else /* X86_32 */
+
+#include <asm/pda.h>
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
+ return ti;
+}
+
+/* do not use in interrupt context */
+static inline struct thread_info *stack_thread_info(void)
+{
+ struct thread_info *ti;
+ asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+ return ti;
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+ movq %gs:pda_kernelstack,reg ; \
+ subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+
+#endif
+
+#endif /* !X86_32 */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU 0x0001 /* FPU was used by this task
+ this quantum (SMP) */
+#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
+#define TS_POLLING 0x0004 /* true if in idle loop
+ and not sleeping */
+#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
#ifndef __ASSEMBLY__
extern void arch_task_cache_init(void);
diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h
deleted file mode 100644
index b6338829d1a..00000000000
--- a/include/asm-x86/thread_info_32.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/* thread_info.h: i386 low-level thread information
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#endif
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed,
- * the assembly constants must also be changed
- */
-#ifndef __ASSEMBLY__
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- unsigned long status; /* thread-synchronous flags */
- __u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable,
- <0 => BUG */
- mm_segment_t addr_limit; /* thread address space:
- 0-0xBFFFFFFF user-thread
- 0-0xFFFFFFFF kernel-thread
- */
- void *sysenter_return;
- struct restart_block restart_block;
- unsigned long previous_esp; /* ESP of the previous stack in
- case of nested (IRQ) stacks
- */
- __u8 supervisor_stack[0];
-};
-
-#else /* !__ASSEMBLY__ */
-
-#include <asm/asm-offsets.h>
-
-#endif
-
-#define PREEMPT_ACTIVE 0x10000000
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE (4096)
-#else
-#define THREAD_SIZE (8192)
-#endif
-
-#define STACK_WARN (THREAD_SIZE/8)
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("esp") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- return (struct thread_info *)
- (current_stack_pointer & ~(THREAD_SIZE - 1));
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) ((struct thread_info *) \
- __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE)))
-#else
-#define alloc_thread_info(tsk) ((struct thread_info *) \
- __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE)))
-#endif
-
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) \
- movl $-THREAD_SIZE, reg; \
- andl %esp, reg
-
-/* use this one if reg already contains %esp */
-#define GET_THREAD_INFO_WITH_ESP(reg) \
- andl $-THREAD_SIZE, reg
-
-#endif
-
-/*
- * thread information flags
- * - these are process state flags that various
- * assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_SINGLESTEP 3 /* restore singlestep on return to
- user mode */
-#define TIF_IRET 4 /* return with iret */
-#define TIF_SYSCALL_EMU 5 /* syscall emulation active */
-#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */
-#define TIF_SECCOMP 7 /* secure computing */
-#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */
-#define TIF_MEMDIE 16
-#define TIF_DEBUG 17 /* uses debug registers */
-#define TIF_IO_BITMAP 18 /* uses I/O bitmap */
-#define TIF_FREEZE 19 /* is freezing for suspend */
-#define TIF_NOTSC 20 /* TSC is not accessible in userland */
-#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */
-#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */
-#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */
-#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_IRET (1 << TIF_IRET)
-#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)
-#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED)
-#define _TIF_DEBUG (1 << TIF_DEBUG)
-#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
-#define _TIF_NOTSC (1 << TIF_NOTSC)
-#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
-#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK \
- (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SECCOMP | _TIF_SYSCALL_EMU))
-/* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
-
-/* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW \
- (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \
- _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS)
-#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
-#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG)
-
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
-#define TS_POLLING 0x0002 /* True if in idle loop
- and not sleeping */
-#define TS_RESTORE_SIGMASK 0x0004 /* restore signal mask in do_signal() */
-
-#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK 1
-static inline void set_restore_sigmask(void)
-{
- struct thread_info *ti = current_thread_info();
- ti->status |= TS_RESTORE_SIGMASK;
- set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h
deleted file mode 100644
index cb69f70abba..00000000000
--- a/include/asm-x86/thread_info_64.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* thread_info.h: x86_64 low-level thread information
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/pda.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- */
-#ifndef __ASSEMBLY__
-struct task_struct;
-struct exec_domain;
-#include <asm/processor.h>
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- __u32 flags; /* low level flags */
- __u32 status; /* thread synchronous flags */
- __u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable,
- <0 => BUG */
- mm_segment_t addr_limit;
- struct restart_block restart_block;
-#ifdef CONFIG_IA32_EMULATION
- void __user *sysenter_return;
-#endif
-};
-#endif
-
-/*
- * macros/functions for gaining access to the thread information structure
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
- return ti;
-}
-
-/* do not use in interrupt context */
-static inline struct thread_info *stack_thread_info(void)
-{
- struct thread_info *ti;
- asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
- return ti;
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
-#else
-#define THREAD_FLAGS GFP_KERNEL
-#endif
-
-#define alloc_thread_info(tsk) \
- ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
-
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) \
- movq %gs:pda_kernelstack,reg ; \
- subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
-
-#endif
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files
- * may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- * Warning: layout of LSW is hardcoded in entry.S
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 2 /* signal pending */
-#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/
-#define TIF_IRET 5 /* force IRET */
-#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
-#define TIF_SECCOMP 8 /* secure computing */
-#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */
-#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */
-/* 16 free */
-#define TIF_IA32 17 /* 32bit process */
-#define TIF_FORK 18 /* ret_from_fork */
-#define TIF_ABI_PENDING 19
-#define TIF_MEMDIE 20
-#define TIF_DEBUG 21 /* uses debug registers */
-#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
-#define TIF_FREEZE 23 /* is freezing for suspend */
-#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */
-#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */
-#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */
-#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */
-#define TIF_NOTSC 28 /* TSC is not accessible in userland */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_IRET (1 << TIF_IRET)
-#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY)
-#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED)
-#define _TIF_IA32 (1 << TIF_IA32)
-#define _TIF_FORK (1 << TIF_FORK)
-#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING)
-#define _TIF_DEBUG (1 << TIF_DEBUG)
-#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
-#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
-#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS)
-#define _TIF_NOTSC (1 << TIF_NOTSC)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK \
- (0x0000FFFF & \
- ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP))
-/* work to do on any return to user space */
-#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
-
-#define _TIF_DO_NOTIFY_MASK \
- (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED)
-
-/* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW \
- (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC)
-#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
-#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
-
-#define PREEMPT_ACTIVE 0x10000000
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
-#define TS_COMPAT 0x0002 /* 32bit syscall active */
-#define TS_POLLING 0x0004 /* true if in idle loop
- and not sleeping */
-#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
-
-#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK 1
-static inline void set_restore_sigmask(void)
-{
- struct thread_info *ti = current_thread_info();
- ti->status |= TS_RESTORE_SIGMASK;
- set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-x86/time.h b/include/asm-x86/time.h
index bce72d7a958..a17fa473e91 100644
--- a/include/asm-x86/time.h
+++ b/include/asm-x86/time.h
@@ -56,4 +56,6 @@ static inline int native_set_wallclock(unsigned long nowtime)
#endif /* CONFIG_PARAVIRT */
+extern unsigned long __init calibrate_cpu(void);
+
#endif
diff --git a/include/asm-x86/timer.h b/include/asm-x86/timer.h
index 4f6fcb050c1..fb2a4ddddf3 100644
--- a/include/asm-x86/timer.h
+++ b/include/asm-x86/timer.h
@@ -7,14 +7,14 @@
#define TICK_SIZE (tick_nsec / 1000)
unsigned long long native_sched_clock(void);
-unsigned long native_calculate_cpu_khz(void);
+unsigned long native_calibrate_tsc(void);
extern int timer_ack;
extern int no_timer_check;
extern int recalibrate_cpu_khz(void);
#ifndef CONFIG_PARAVIRT
-#define calculate_cpu_khz() native_calculate_cpu_khz()
+#define calibrate_tsc() native_calibrate_tsc()
#endif
/* Accelerators for sched_clock()
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
index dcf3f8131d6..90ac7718469 100644
--- a/include/asm-x86/topology.h
+++ b/include/asm-x86/topology.h
@@ -35,79 +35,93 @@
# endif
#endif
+/* Node not present */
+#define NUMA_NO_NODE (-1)
+
#ifdef CONFIG_NUMA
#include <linux/cpumask.h>
#include <asm/mpspec.h>
-/* Mappings between logical cpu number and node number */
#ifdef CONFIG_X86_32
-extern int cpu_to_node_map[];
-#else
-/* Returns the number of the current Node. */
-#define numa_node_id() (early_cpu_to_node(raw_smp_processor_id()))
-#endif
-
-DECLARE_PER_CPU(int, x86_cpu_to_node_map);
-
-#ifdef CONFIG_SMP
-extern int x86_cpu_to_node_map_init[];
-extern void *x86_cpu_to_node_map_early_ptr;
-#else
-#define x86_cpu_to_node_map_early_ptr NULL
-#endif
+/* Mappings between node number and cpus on that node. */
extern cpumask_t node_to_cpumask_map[];
-#define NUMA_NO_NODE (-1)
+/* Mappings between logical cpu number and node number */
+extern int cpu_to_node_map[];
/* Returns the number of the node containing CPU 'cpu' */
-#ifdef CONFIG_X86_32
-#define early_cpu_to_node(cpu) cpu_to_node(cpu)
static inline int cpu_to_node(int cpu)
{
return cpu_to_node_map[cpu];
}
+#define early_cpu_to_node(cpu) cpu_to_node(cpu)
-#else /* CONFIG_X86_64 */
-
-#ifdef CONFIG_SMP
-static inline int early_cpu_to_node(int cpu)
+/* Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used. The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+static inline cpumask_t node_to_cpumask(int node)
{
- int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr;
-
- if (cpu_to_node_map)
- return cpu_to_node_map[cpu];
- else if (per_cpu_offset(cpu))
- return per_cpu(x86_cpu_to_node_map, cpu);
- else
- return NUMA_NO_NODE;
+ return node_to_cpumask_map[node];
}
-#else
-#define early_cpu_to_node(cpu) cpu_to_node(cpu)
-#endif
+#else /* CONFIG_X86_64 */
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_t *node_to_cpumask_map;
+
+/* Mappings between logical cpu number and node number */
+DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
+
+/* Returns the number of the current Node. */
+#define numa_node_id() read_pda(nodenumber)
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+extern int cpu_to_node(int cpu);
+extern int early_cpu_to_node(int cpu);
+extern const cpumask_t *_node_to_cpumask_ptr(int node);
+extern cpumask_t node_to_cpumask(int node);
+
+#else /* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Returns the number of the node containing CPU 'cpu' */
static inline int cpu_to_node(int cpu)
{
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
- if (x86_cpu_to_node_map_early_ptr) {
- printk("KERN_NOTICE cpu_to_node(%d): usage too early!\n",
- (int)cpu);
- dump_stack();
- return ((int *)x86_cpu_to_node_map_early_ptr)[cpu];
- }
-#endif
return per_cpu(x86_cpu_to_node_map, cpu);
}
-#ifdef CONFIG_NUMA
+/* Same function but used if called before per_cpu areas are setup */
+static inline int early_cpu_to_node(int cpu)
+{
+ if (early_per_cpu_ptr(x86_cpu_to_node_map))
+ return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+ return per_cpu(x86_cpu_to_node_map, cpu);
+}
/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+ return &node_to_cpumask_map[node];
+}
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline cpumask_t node_to_cpumask(int node)
+{
+ return node_to_cpumask_map[node];
+}
+
+#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Replace default node_to_cpumask_ptr with optimized version */
#define node_to_cpumask_ptr(v, node) \
- cpumask_t *v = &(node_to_cpumask_map[node])
+ const cpumask_t *v = _node_to_cpumask_ptr(node)
#define node_to_cpumask_ptr_next(v, node) \
- v = &(node_to_cpumask_map[node])
-#endif
+ v = _node_to_cpumask_ptr(node)
#endif /* CONFIG_X86_64 */
@@ -117,20 +131,6 @@ static inline int cpu_to_node(int cpu)
*/
#define parent_node(node) (node)
-/* Returns a bitmask of CPUs on Node 'node'. */
-static inline cpumask_t node_to_cpumask(int node)
-{
- return node_to_cpumask_map[node];
-}
-
-/* Returns the number of the first CPU on Node 'node'. */
-static inline int node_to_first_cpu(int node)
-{
- cpumask_t mask = node_to_cpumask(node);
-
- return first_cpu(mask);
-}
-
#define pcibus_to_node(bus) __pcibus_to_node(bus)
#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus)
@@ -180,12 +180,44 @@ extern int __node_distance(int, int);
#define node_distance(a, b) __node_distance(a, b)
#endif
-#else /* CONFIG_NUMA */
+#else /* !CONFIG_NUMA */
+#define numa_node_id() 0
+#define cpu_to_node(cpu) 0
+#define early_cpu_to_node(cpu) 0
+
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+ return &cpu_online_map;
+}
+static inline cpumask_t node_to_cpumask(int node)
+{
+ return cpu_online_map;
+}
+static inline int node_to_first_cpu(int node)
+{
+ return first_cpu(cpu_online_map);
+}
+
+/* Replace default node_to_cpumask_ptr with optimized version */
+#define node_to_cpumask_ptr(v, node) \
+ const cpumask_t *v = _node_to_cpumask_ptr(node)
+
+#define node_to_cpumask_ptr_next(v, node) \
+ v = _node_to_cpumask_ptr(node)
#endif
#include <asm-generic/topology.h>
+#ifdef CONFIG_NUMA
+/* Returns the number of the first CPU on Node 'node'. */
+static inline int node_to_first_cpu(int node)
+{
+ node_to_cpumask_ptr(mask, node);
+ return first_cpu(*mask);
+}
+#endif
+
extern cpumask_t cpu_coregroup_map(int cpu);
#ifdef ENABLE_TOPO_DEFINES
@@ -193,6 +225,9 @@ extern cpumask_t cpu_coregroup_map(int cpu);
#define topology_core_id(cpu) (cpu_data(cpu).cpu_core_id)
#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
+
+/* indicates that pointers to the topology cpumask_t maps are valid */
+#define arch_provides_topology_pointers yes
#endif
static inline void arch_fix_phys_package_id(int num, u32 slot)
@@ -220,4 +255,4 @@ static inline void set_mp_bus_to_node(int busnum, int node)
}
#endif
-#endif
+#endif /* _ASM_X86_TOPOLOGY_H */
diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h
index 548873ab5fc..cb6f6ee45b8 100644
--- a/include/asm-x86/tsc.h
+++ b/include/asm-x86/tsc.h
@@ -48,7 +48,6 @@ static __always_inline cycles_t vget_cycles(void)
extern void tsc_init(void);
extern void mark_tsc_unstable(char *reason);
extern int unsynchronized_tsc(void);
-extern void init_tsc_clocksource(void);
int check_tsc_unstable(void);
/*
@@ -58,7 +57,6 @@ int check_tsc_unstable(void);
extern void check_tsc_sync_source(int cpu);
extern void check_tsc_sync_target(void);
-extern void tsc_calibrate(void);
extern int notsc_setup(char *);
#endif
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index 9fefd2947e7..f6fa4d841bb 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -1,5 +1,453 @@
+#ifndef _ASM_UACCES_H_
+#define _ASM_UACCES_H_
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(-1UL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < \
+ (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ *
+ * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
+ */
+
+#define __range_not_ok(addr, size) \
+({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
+ : "=&r" (flag), "=r" (roksum) \
+ : "1" (addr), "g" ((long)(size)), \
+ "rm" (current_thread_info()->addr_limit.seg)); \
+ flag; \
+})
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_x(size, ret, x, ptr) \
+ asm volatile("call __get_user_" #size \
+ : "=a" (ret),"=d" (x) \
+ : "0" (ptr)) \
+
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#ifdef CONFIG_X86_32
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(X, __ret_gu, __val_gu, ptr)
+#else
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(8, __ret_gu, __val_gu, ptr)
+#endif
+
+#define get_user(x, ptr) \
+({ \
+ int __ret_gu; \
+ unsigned long __val_gu; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_x(1, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 2: \
+ __get_user_x(2, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 4: \
+ __get_user_x(4, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 8: \
+ __get_user_8(__ret_gu, __val_gu, ptr); \
+ break; \
+ default: \
+ __get_user_x(X, __ret_gu, __val_gu, ptr); \
+ break; \
+ } \
+ (x) = (__typeof__(*(ptr)))__val_gu; \
+ __ret_gu; \
+})
+
+#define __put_user_x(size, x, ptr, __ret_pu) \
+ asm volatile("call __put_user_" #size : "=a" (__ret_pu) \
+ :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+
+
+
+#ifdef CONFIG_X86_32
+#define __put_user_u64(x, addr, err) \
+ asm volatile("1: movl %%eax,0(%2)\n" \
+ "2: movl %%edx,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: movl %3,%0\n" \
+ " jmp 3b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 4b) \
+ _ASM_EXTABLE(2b, 4b) \
+ : "=r" (err) \
+ : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_x8(x, ptr, __ret_pu) \
+ asm volatile("call __put_user_8" : "=a" (__ret_pu) \
+ : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+#else
+#define __put_user_u64(x, ptr, retval) \
+ __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
+#endif
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax. clobbers %rbx
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr)) __pu_val; \
+ __chk_user_ptr(ptr); \
+ __pu_val = x; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __put_user_x(1, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 2: \
+ __put_user_x(2, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 4: \
+ __put_user_x(4, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 8: \
+ __put_user_x8(__pu_val, ptr, __ret_pu); \
+ break; \
+ default: \
+ __put_user_x(X, __pu_val, ptr, __ret_pu); \
+ break; \
+ } \
+ __ret_pu; \
+})
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l", "k", "ir", errret);\
+ break; \
+ case 8: \
+ __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
+} while (0)
+
+#else
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ retval = 0; \
+ \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
+ retval = errret; \
+} while (0)
+
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ __ret_pu = 0; \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
+ sizeof(*(ptr))) != 0)) \
+ __ret_pu = -EFAULT; \
+ __ret_pu; \
+})
+#endif
+
+#ifdef CONFIG_X86_32
+#define __get_user_asm_u64(x, ptr, retval, errret) (x) = __get_user_bad()
+#else
+#define __get_user_asm_u64(x, ptr, retval, errret) \
+ __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#endif
+
+#define __get_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l", "k", "=r", errret); \
+ break; \
+ case 8: \
+ __get_user_asm_u64(x, ptr, retval, errret); \
+ break; \
+ default: \
+ (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %2,%"rtype"1\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " xor"itype" %"rtype"1,%"rtype"1\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (err), ltype(x) \
+ : "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
+ __pu_err; \
+})
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ unsigned long __gu_val; \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
+ (x) = (__force __typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %"rtype"1,%2\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r"(err) \
+ : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+ int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define ARCH_HAS_NOCACHE_UACCESS 1
+
#ifdef CONFIG_X86_32
# include "uaccess_32.h"
#else
+# define ARCH_HAS_SEARCH_EXTABLE
# include "uaccess_64.h"
#endif
+
+#endif
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index 8e7595c1f34..6fdef39a0bc 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -11,426 +11,6 @@
#include <asm/asm.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-/*
- * movsl can be slow when source and dest are not both 8-byte aligned
- */
-#ifdef CONFIG_X86_INTEL_USERCOPY
-extern struct movsl_mask {
- int mask;
-} ____cacheline_aligned_in_smp movsl_mask;
-#endif
-
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
- *
- * This needs 33-bit arithmetic. We have a carry...
- */
-#define __range_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr), "g" ((int)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
- * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- * to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
-
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-/**
- * get_user: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x, ptr) \
-({ \
- int __ret_gu; \
- unsigned long __val_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_x(X, __ret_gu, __val_gu, ptr); \
- break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_bad(void);
-
-/*
- * Strange magic calling convention: pointer in %ecx,
- * value in %eax(:%edx), return value in %eax, no clobbers.
- */
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-#define __put_user_1(x, ptr) \
- asm volatile("call __put_user_1" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_2(x, ptr) \
- asm volatile("call __put_user_2" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_4(x, ptr) \
- asm volatile("call __put_user_4" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_8(x, ptr) \
- asm volatile("call __put_user_8" : "=a" (__ret_pu) \
- : "A" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_X(x, ptr) \
- asm volatile("call __put_user_X" : "=a" (__ret_pu) \
- : "c" (ptr))
-
-/**
- * put_user: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr)) __pu_val; \
- __chk_user_ptr(ptr); \
- __pu_val = x; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __put_user_1(__pu_val, ptr); \
- break; \
- case 2: \
- __put_user_2(__pu_val, ptr); \
- break; \
- case 4: \
- __put_user_4(__pu_val, ptr); \
- break; \
- case 8: \
- __put_user_8(__pu_val, ptr); \
- break; \
- default: \
- __put_user_X(__pu_val, ptr); \
- break; \
- } \
- __ret_pu; \
-})
-
-#else
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr))__pus_tmp = x; \
- __ret_pu = 0; \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
- sizeof(*(ptr))) != 0)) \
- __ret_pu = -EFAULT; \
- __ret_pu; \
-})
-
-
-#endif
-
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- long __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
- __pu_err; \
-})
-
-
-#define __put_user_u64(x, addr, err) \
- asm volatile("1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 4b) \
- _ASM_EXTABLE(2b, 4b) \
- : "=r" (err) \
- : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \
- break; \
- case 8: \
- __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-#else
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- __typeof__(*(ptr))__pus_tmp = x; \
- retval = 0; \
- \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
- retval = errret; \
-} while (0)
-
-#endif
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i" (errret), "0" (err))
-
-
unsigned long __must_check __copy_to_user_ll
(void __user *to, const void *from, unsigned long n);
unsigned long __must_check __copy_from_user_ll
@@ -576,8 +156,6 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
return __copy_from_user_ll(to, from, n);
}
-#define ARCH_HAS_NOCACHE_UACCESS
-
static __always_inline unsigned long __copy_from_user_nocache(void *to,
const void __user *from, unsigned long n)
{
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index b8a2f433990..515d4dce96b 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -9,265 +9,6 @@
#include <linux/prefetch.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) (!((unsigned long)(addr) & \
- (current_thread_info()->addr_limit.seg)))
-
-/*
- * Uhhuh, this needs 65-bit arithmetic. We have a carry..
- */
-#define __range_not_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("# range_ok\n\r" \
- "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
- : "=&r" (flag), "=r" (roksum) \
- : "1" (addr), "g" ((long)(size)), \
- "g" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-#define access_ok(type, addr, size) (__range_not_ok(addr, size) == 0)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#define ARCH_HAS_SEARCH_EXTABLE
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- : "=a" (ret),"=d" (x) \
- : "c" (ptr) \
- : "r8")
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-#define get_user(x, ptr) \
-({ \
- unsigned long __val_gu; \
- int __ret_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- case 8: \
- __get_user_x(8, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_bad(); \
- break; \
- } \
- (x) = (__force typeof(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-extern void __put_user_bad(void);
-
-#define __put_user_x(size, ret, x, ptr) \
- asm volatile("call __put_user_" #size \
- :"=a" (ret) \
- :"c" (ptr),"d" (x) \
- :"r8")
-
-#define put_user(x, ptr) \
- __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- int __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x, ptr, size) \
-({ \
- int __pu_err; \
- typeof(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: \
- __put_user_x(1, __pu_err, x, __pu_addr); \
- break; \
- case 2: \
- __put_user_x(2, __pu_err, x, __pu_addr); \
- break; \
- case 4: \
- __put_user_x(4, __pu_err, x, __pu_addr); \
- break; \
- case 8: \
- __put_user_x(8, __pu_err, x, __pu_addr); \
- break; \
- default: \
- __put_user_bad(); \
- } \
- __pu_err; \
-})
-
-#define __put_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", -EFAULT);\
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", -EFAULT);\
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "k", "ir", -EFAULT);\
- break; \
- case 8: \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-/* FIXME: this hack is definitely wrong -AK */
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errno), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- int __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__force typeof(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern int __get_user_1(void);
-extern int __get_user_2(void);
-extern int __get_user_4(void);
-extern int __get_user_8(void);
-extern int __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", -EFAULT);\
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", -EFAULT);\
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "k", "=r", -EFAULT);\
- break; \
- case 8: \
- __get_user_asm(x, ptr, retval, "q", "", "=r", -EFAULT); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i"(errno), "0"(err))
-
/*
* Copy To/From Userspace
*/
@@ -437,7 +178,6 @@ __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
return copy_user_generic((__force void *)dst, src, size);
}
-#define ARCH_HAS_NOCACHE_UACCESS 1
extern long __copy_user_nocache(void *dst, const void __user *src,
unsigned size, int zerorest);
@@ -455,4 +195,7 @@ static inline int __copy_from_user_inatomic_nocache(void *dst,
return __copy_user_nocache(dst, src, size, 0);
}
+unsigned long
+copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
+
#endif /* __X86_64_UACCESS_H */
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index fe26e36d0f5..9c1a4a3470d 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -290,7 +290,7 @@ __SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
#define __NR_rt_sigqueueinfo 129
__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
#define __NR_rt_sigsuspend 130
-__SYSCALL(__NR_rt_sigsuspend, stub_rt_sigsuspend)
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
#define __NR_sigaltstack 131
__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
#define __NR_utime 132
diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h
new file mode 100644
index 00000000000..91ac0dfb758
--- /dev/null
+++ b/include/asm-x86/uv/uv_bau.h
@@ -0,0 +1,337 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Broadcast Assist Unit definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_X86_UV_BAU__
+#define __ASM_X86_UV_BAU__
+
+#include <linux/bitmap.h>
+#define BITSPERBYTE 8
+
+/*
+ * Broadcast Assist Unit messaging structures
+ *
+ * Selective Broadcast activations are induced by software action
+ * specifying a particular 8-descriptor "set" via a 6-bit index written
+ * to an MMR.
+ * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
+ * each 6-bit index value. These descriptor sets are mapped in sequence
+ * starting with set 0 located at the address specified in the
+ * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
+ * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
+ *
+ * We will use 31 sets, one for sending BAU messages from each of the 32
+ * cpu's on the node.
+ *
+ * TLB shootdown will use the first of the 8 descriptors of each set.
+ * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
+ */
+
+#define UV_ITEMS_PER_DESCRIPTOR 8
+#define UV_CPUS_PER_ACT_STATUS 32
+#define UV_ACT_STATUS_MASK 0x3
+#define UV_ACT_STATUS_SIZE 2
+#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
+#define UV_DISTRIBUTION_SIZE 256
+#define UV_SW_ACK_NPENDING 8
+#define UV_BAU_MESSAGE 200
+/*
+ * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
+ * To be dynamically allocated in the future
+ */
+#define UV_NET_ENDPOINT_INTD 0x38
+#define UV_DESC_BASE_PNODE_SHIFT 49
+#define UV_PAYLOADQ_PNODE_SHIFT 49
+#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
+#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
+
+/*
+ * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
+ */
+#define DESC_STATUS_IDLE 0
+#define DESC_STATUS_ACTIVE 1
+#define DESC_STATUS_DESTINATION_TIMEOUT 2
+#define DESC_STATUS_SOURCE_TIMEOUT 3
+
+/*
+ * source side threshholds at which message retries print a warning
+ */
+#define SOURCE_TIMEOUT_LIMIT 20
+#define DESTINATION_TIMEOUT_LIMIT 20
+
+/*
+ * number of entries in the destination side payload queue
+ */
+#define DEST_Q_SIZE 17
+/*
+ * number of destination side software ack resources
+ */
+#define DEST_NUM_RESOURCES 8
+#define MAX_CPUS_PER_NODE 32
+/*
+ * completion statuses for sending a TLB flush message
+ */
+#define FLUSH_RETRY 1
+#define FLUSH_GIVEUP 2
+#define FLUSH_COMPLETE 3
+
+/*
+ * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
+ * If the 'multilevel' flag in the header portion of the descriptor
+ * has been set to 0, then endpoint multi-unicast mode is selected.
+ * The distribution specification (32 bytes) is interpreted as a 256-bit
+ * distribution vector. Adjacent bits correspond to consecutive even numbered
+ * nodeIDs. The result of adding the index of a given bit to the 15-bit
+ * 'base_dest_nodeid' field of the header corresponds to the
+ * destination nodeID associated with that specified bit.
+ */
+struct bau_target_nodemask {
+ unsigned long bits[BITS_TO_LONGS(256)];
+};
+
+/*
+ * mask of cpu's on a node
+ * (during initialization we need to check that unsigned long has
+ * enough bits for max. cpu's per node)
+ */
+struct bau_local_cpumask {
+ unsigned long bits;
+};
+
+/*
+ * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
+ * only 12 bytes (96 bits) of the payload area are usable.
+ * An additional 3 bytes (bits 27:4) of the header address are carried
+ * to the next bytes of the destination payload queue.
+ * And an additional 2 bytes of the header Suppl_A field are also
+ * carried to the destination payload queue.
+ * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
+ * of the destination payload queue, which is written by the hardware
+ * with the s/w ack resource bit vector.
+ * [ effective message contents (16 bytes (128 bits) maximum), not counting
+ * the s/w ack bit vector ]
+ */
+
+/*
+ * The payload is software-defined for INTD transactions
+ */
+struct bau_msg_payload {
+ unsigned long address; /* signifies a page or all TLB's
+ of the cpu */
+ /* 64 bits */
+ unsigned short sending_cpu; /* filled in by sender */
+ /* 16 bits */
+ unsigned short acknowledge_count;/* filled in by destination */
+ /* 16 bits */
+ unsigned int reserved1:32; /* not usable */
+};
+
+
+/*
+ * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * see table 4.2.3.0.1 in broacast_assist spec.
+ */
+struct bau_msg_header {
+ int dest_subnodeid:6; /* must be zero */
+ /* bits 5:0 */
+ int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
+ /* bits 20:6 */
+ int command:8; /* message type */
+ /* bits 28:21 */
+ /* 0x38: SN3net EndPoint Message */
+ int rsvd_1:3; /* must be zero */
+ /* bits 31:29 */
+ /* int will align on 32 bits */
+ int rsvd_2:9; /* must be zero */
+ /* bits 40:32 */
+ /* Suppl_A is 56-41 */
+ int payload_2a:8; /* becomes byte 16 of msg */
+ /* bits 48:41 */ /* not currently using */
+ int payload_2b:8; /* becomes byte 17 of msg */
+ /* bits 56:49 */ /* not currently using */
+ /* Address field (96:57) is never used as an
+ address (these are address bits 42:3) */
+ int rsvd_3:1; /* must be zero */
+ /* bit 57 */
+ /* address bits 27:4 are payload */
+ /* these 24 bits become bytes 12-14 of msg */
+ int replied_to:1; /* sent as 0 by the source to byte 12 */
+ /* bit 58 */
+
+ int payload_1a:5; /* not currently used */
+ /* bits 63:59 */
+ int payload_1b:8; /* not currently used */
+ /* bits 71:64 */
+ int payload_1c:8; /* not currently used */
+ /* bits 79:72 */
+ int payload_1d:2; /* not currently used */
+ /* bits 81:80 */
+
+ int rsvd_4:7; /* must be zero */
+ /* bits 88:82 */
+ int sw_ack_flag:1; /* software acknowledge flag */
+ /* bit 89 */
+ /* INTD trasactions at destination are to
+ wait for software acknowledge */
+ int rsvd_5:6; /* must be zero */
+ /* bits 95:90 */
+ int rsvd_6:5; /* must be zero */
+ /* bits 100:96 */
+ int int_both:1; /* if 1, interrupt both sockets on the blade */
+ /* bit 101*/
+ int fairness:3; /* usually zero */
+ /* bits 104:102 */
+ int multilevel:1; /* multi-level multicast format */
+ /* bit 105 */
+ /* 0 for TLB: endpoint multi-unicast messages */
+ int chaining:1; /* next descriptor is part of this activation*/
+ /* bit 106 */
+ int rsvd_7:21; /* must be zero */
+ /* bits 127:107 */
+};
+
+/*
+ * The activation descriptor:
+ * The format of the message to send, plus all accompanying control
+ * Should be 64 bytes
+ */
+struct bau_desc {
+ struct bau_target_nodemask distribution;
+ /*
+ * message template, consisting of header and payload:
+ */
+ struct bau_msg_header header;
+ struct bau_msg_payload payload;
+};
+/*
+ * -payload-- ---------header------
+ * bytes 0-11 bits 41-56 bits 58-81
+ * A B (2) C (3)
+ *
+ * A/B/C are moved to:
+ * A C B
+ * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
+ * ------------payload queue-----------
+ */
+
+/*
+ * The payload queue on the destination side is an array of these.
+ * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
+ * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
+ * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
+ * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
+ * sw_ack_vector and payload_2)
+ * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
+ * Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
+ * operation."
+ */
+struct bau_payload_queue_entry {
+ unsigned long address; /* signifies a page or all TLB's
+ of the cpu */
+ /* 64 bits, bytes 0-7 */
+
+ unsigned short sending_cpu; /* cpu that sent the message */
+ /* 16 bits, bytes 8-9 */
+
+ unsigned short acknowledge_count; /* filled in by destination */
+ /* 16 bits, bytes 10-11 */
+
+ unsigned short replied_to:1; /* sent as 0 by the source */
+ /* 1 bit */
+ unsigned short unused1:7; /* not currently using */
+ /* 7 bits: byte 12) */
+
+ unsigned char unused2[2]; /* not currently using */
+ /* bytes 13-14 */
+
+ unsigned char sw_ack_vector; /* filled in by the hardware */
+ /* byte 15 (bits 127:120) */
+
+ unsigned char unused4[3]; /* not currently using bytes 17-19 */
+ /* bytes 17-19 */
+
+ int number_of_cpus; /* filled in at destination */
+ /* 32 bits, bytes 20-23 (aligned) */
+
+ unsigned char unused5[8]; /* not using */
+ /* bytes 24-31 */
+};
+
+/*
+ * one for every slot in the destination payload queue
+ */
+struct bau_msg_status {
+ struct bau_local_cpumask seen_by; /* map of cpu's */
+};
+
+/*
+ * one for every slot in the destination software ack resources
+ */
+struct bau_sw_ack_status {
+ struct bau_payload_queue_entry *msg; /* associated message */
+ int watcher; /* cpu monitoring, or -1 */
+};
+
+/*
+ * one on every node and per-cpu; to locate the software tables
+ */
+struct bau_control {
+ struct bau_desc *descriptor_base;
+ struct bau_payload_queue_entry *bau_msg_head;
+ struct bau_payload_queue_entry *va_queue_first;
+ struct bau_payload_queue_entry *va_queue_last;
+ struct bau_msg_status *msg_statuses;
+ int *watching; /* pointer to array */
+};
+
+/*
+ * This structure is allocated per_cpu for UV TLB shootdown statistics.
+ */
+struct ptc_stats {
+ unsigned long ptc_i; /* number of IPI-style flushes */
+ unsigned long requestor; /* number of nodes this cpu sent to */
+ unsigned long requestee; /* times cpu was remotely requested */
+ unsigned long alltlb; /* times all tlb's on this cpu were flushed */
+ unsigned long onetlb; /* times just one tlb on this cpu was flushed */
+ unsigned long s_retry; /* retries on source side timeouts */
+ unsigned long d_retry; /* retries on destination side timeouts */
+ unsigned long sflush; /* cycles spent in uv_flush_tlb_others */
+ unsigned long dflush; /* cycles spent on destination side */
+ unsigned long retriesok; /* successes on retries */
+ unsigned long nomsg; /* interrupts with no message */
+ unsigned long multmsg; /* interrupts with multiple messages */
+ unsigned long ntargeted;/* nodes targeted */
+};
+
+static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
+{
+ return constant_test_bit(node, &dstp->bits[0]);
+}
+static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
+{
+ __set_bit(node, &dstp->bits[0]);
+}
+static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
+{
+ bitmap_zero(&dstp->bits[0], nbits);
+}
+
+static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
+{
+ bitmap_zero(&dstp->bits, nbits);
+}
+
+#define cpubit_isset(cpu, bau_local_cpumask) \
+ test_bit((cpu), (bau_local_cpumask).bits)
+
+extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
+extern void uv_bau_message_intr1(void);
+extern void uv_bau_timeout_intr1(void);
+
+#endif /* __ASM_X86_UV_BAU__ */
diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h
index 26b9240d1e2..a4ef26e5850 100644
--- a/include/asm-x86/uv/uv_hub.h
+++ b/include/asm-x86/uv/uv_hub.h
@@ -5,7 +5,7 @@
*
* SGI UV architectural definitions
*
- * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef __ASM_X86_UV_HUB_H__
@@ -20,26 +20,49 @@
/*
* Addressing Terminology
*
- * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
- * routers always have low bit of 1, C/MBricks have low bit
- * equal to 0. Most addressing macros that target UV hub chips
- * right shift the NASID by 1 to exclude the always-zero bit.
+ * M - The low M bits of a physical address represent the offset
+ * into the blade local memory. RAM memory on a blade is physically
+ * contiguous (although various IO spaces may punch holes in
+ * it)..
*
- * SNASID - NASID right shifted by 1 bit.
+ * N - Number of bits in the node portion of a socket physical
+ * address.
+ *
+ * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * routers always have low bit of 1, C/MBricks have low bit
+ * equal to 0. Most addressing macros that target UV hub chips
+ * right shift the NASID by 1 to exclude the always-zero bit.
+ * NASIDs contain up to 15 bits.
+ *
+ * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ * of nasids.
+ *
+ * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
+ * of the nasid for socket usage.
+ *
+ *
+ * NumaLink Global Physical Address Format:
+ * +--------------------------------+---------------------+
+ * |00..000| GNODE | NodeOffset |
+ * +--------------------------------+---------------------+
+ * |<-------53 - M bits --->|<--------M bits ----->
+ *
+ * M - number of node offset bits (35 .. 40)
*
*
* Memory/UV-HUB Processor Socket Address Format:
- * +--------+---------------+---------------------+
- * |00..0000| SNASID | NodeOffset |
- * +--------+---------------+---------------------+
- * <--- N bits --->|<--------M bits ----->
+ * +----------------+---------------+---------------------+
+ * |00..000000000000| PNODE | NodeOffset |
+ * +----------------+---------------+---------------------+
+ * <--- N bits --->|<--------M bits ----->
*
- * M number of node offset bits (35 .. 40)
- * N number of SNASID bits (0 .. 10)
+ * M - number of node offset bits (35 .. 40)
+ * N - number of PNODE bits (0 .. 10)
*
* Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
* The actual values are configuration dependent and are set at
- * boot time
+ * boot time. M & N values are set by the hardware/BIOS at boot.
+ *
*
* APICID format
* NOTE!!!!!! This is the current format of the APICID. However, code
@@ -48,14 +71,14 @@
*
* 1111110000000000
* 5432109876543210
- * nnnnnnnnnnlc0cch
+ * pppppppppplc0cch
* sssssssssss
*
- * n = snasid bits
+ * p = pnode bits
* l = socket number on board
* c = core
* h = hyperthread
- * s = bits that are in the socket CSR
+ * s = bits that are in the SOCKET_ID CSR
*
* Note: Processor only supports 12 bits in the APICID register. The ACPI
* tables hold all 16 bits. Software needs to be aware of this.
@@ -74,7 +97,7 @@
* This value is also the value of the maximum number of non-router NASIDs
* in the numalink fabric.
*
- * NOTE: a brick may be 1 or 2 OS nodes. Don't get these confused.
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
*/
#define UV_MAX_NUMALINK_BLADES 16384
@@ -96,8 +119,12 @@
*/
struct uv_hub_info_s {
unsigned long global_mmr_base;
- unsigned short local_nasid;
- unsigned short gnode_upper;
+ unsigned long gpa_mask;
+ unsigned long gnode_upper;
+ unsigned long lowmem_remap_top;
+ unsigned long lowmem_remap_base;
+ unsigned short pnode;
+ unsigned short pnode_mask;
unsigned short coherency_domain_number;
unsigned short numa_blade_id;
unsigned char blade_processor_id;
@@ -112,83 +139,126 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
* Local & Global MMR space macros.
* Note: macros are intended to be used ONLY by inline functions
* in this file - not by other kernel code.
+ * n - NASID (full 15-bit global nasid)
+ * g - GNODE (full 15-bit global nasid, right shifted 1)
+ * p - PNODE (local part of nsids, right shifted 1)
*/
-#define UV_SNASID(n) ((n) >> 1)
-#define UV_NASID(n) ((n) << 1)
+#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper)
#define UV_LOCAL_MMR_BASE 0xf4000000UL
#define UV_GLOBAL_MMR32_BASE 0xf8000000UL
#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base)
+#define UV_LOCAL_MMR_SIZE (64UL * 1024 * 1024)
+#define UV_GLOBAL_MMR32_SIZE (64UL * 1024 * 1024)
-#define UV_GLOBAL_MMR32_SNASID_MASK 0x3ff
-#define UV_GLOBAL_MMR32_SNASID_SHIFT 15
-#define UV_GLOBAL_MMR64_SNASID_SHIFT 26
+#define UV_GLOBAL_MMR32_PNODE_SHIFT 15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT 26
-#define UV_GLOBAL_MMR32_NASID_BITS(n) \
- (((UV_SNASID(n) & UV_GLOBAL_MMR32_SNASID_MASK)) << \
- (UV_GLOBAL_MMR32_SNASID_SHIFT))
+#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
-#define UV_GLOBAL_MMR64_NASID_BITS(n) \
- ((unsigned long)UV_SNASID(n) << UV_GLOBAL_MMR64_SNASID_SHIFT)
+#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
+ ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+#define UV_APIC_PNODE_SHIFT 6
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * Note: use the standard __pa() & __va() macros for converting
+ * between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+ if (paddr < uv_hub_info->lowmem_remap_top)
+ paddr += uv_hub_info->lowmem_remap_base;
+ return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+ return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+ return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+ return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+ return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
-#define UV_APIC_NASID_SHIFT 6
/*
- * Extract a NASID from an APICID (full apicid, not processor subset)
+ * Extract a PNODE from an APICID (full apicid, not processor subset)
*/
-static inline int uv_apicid_to_nasid(int apicid)
+static inline int uv_apicid_to_pnode(int apicid)
{
- return (UV_NASID(apicid >> UV_APIC_NASID_SHIFT));
+ return (apicid >> UV_APIC_PNODE_SHIFT);
}
/*
* Access global MMRs using the low memory MMR32 space. This region supports
* faster MMR access but not all MMRs are accessible in this space.
*/
-static inline unsigned long *uv_global_mmr32_address(int nasid,
+static inline unsigned long *uv_global_mmr32_address(int pnode,
unsigned long offset)
{
return __va(UV_GLOBAL_MMR32_BASE |
- UV_GLOBAL_MMR32_NASID_BITS(nasid) | offset);
+ UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
}
-static inline void uv_write_global_mmr32(int nasid, unsigned long offset,
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
unsigned long val)
{
- *uv_global_mmr32_address(nasid, offset) = val;
+ *uv_global_mmr32_address(pnode, offset) = val;
}
-static inline unsigned long uv_read_global_mmr32(int nasid,
+static inline unsigned long uv_read_global_mmr32(int pnode,
unsigned long offset)
{
- return *uv_global_mmr32_address(nasid, offset);
+ return *uv_global_mmr32_address(pnode, offset);
}
/*
* Access Global MMR space using the MMR space located at the top of physical
* memory.
*/
-static inline unsigned long *uv_global_mmr64_address(int nasid,
+static inline unsigned long *uv_global_mmr64_address(int pnode,
unsigned long offset)
{
return __va(UV_GLOBAL_MMR64_BASE |
- UV_GLOBAL_MMR64_NASID_BITS(nasid) | offset);
+ UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
}
-static inline void uv_write_global_mmr64(int nasid, unsigned long offset,
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
unsigned long val)
{
- *uv_global_mmr64_address(nasid, offset) = val;
+ *uv_global_mmr64_address(pnode, offset) = val;
}
-static inline unsigned long uv_read_global_mmr64(int nasid,
+static inline unsigned long uv_read_global_mmr64(int pnode,
unsigned long offset)
{
- return *uv_global_mmr64_address(nasid, offset);
+ return *uv_global_mmr64_address(pnode, offset);
}
/*
- * Access node local MMRs. Faster than using global space but only local MMRs
+ * Access hub local MMRs. Faster than using global space but only local MMRs
* are accessible.
*/
static inline unsigned long *uv_local_mmr_address(unsigned long offset)
@@ -207,15 +277,15 @@ static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
}
/*
- * Structures and definitions for converting between cpu, node, and blade
+ * Structures and definitions for converting between cpu, node, pnode, and blade
* numbers.
*/
struct uv_blade_info {
- unsigned short nr_posible_cpus;
+ unsigned short nr_possible_cpus;
unsigned short nr_online_cpus;
- unsigned short nasid;
+ unsigned short pnode;
};
-struct uv_blade_info *uv_blade_info;
+extern struct uv_blade_info *uv_blade_info;
extern short *uv_node_to_blade;
extern short *uv_cpu_to_blade;
extern short uv_possible_blades;
@@ -244,16 +314,16 @@ static inline int uv_node_to_blade_id(int nid)
return uv_node_to_blade[nid];
}
-/* Convert a blade id to the NASID of the blade */
-static inline int uv_blade_to_nasid(int bid)
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
{
- return uv_blade_info[bid].nasid;
+ return uv_blade_info[bid].pnode;
}
/* Determine the number of possible cpus on a blade */
static inline int uv_blade_nr_possible_cpus(int bid)
{
- return uv_blade_info[bid].nr_posible_cpus;
+ return uv_blade_info[bid].nr_possible_cpus;
}
/* Determine the number of online cpus on a blade */
@@ -262,16 +332,16 @@ static inline int uv_blade_nr_online_cpus(int bid)
return uv_blade_info[bid].nr_online_cpus;
}
-/* Convert a cpu id to the NASID of the blade containing the cpu */
-static inline int uv_cpu_to_nasid(int cpu)
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
{
- return uv_blade_info[uv_cpu_to_blade_id(cpu)].nasid;
+ return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode;
}
-/* Convert a node number to the NASID of the blade */
-static inline int uv_node_to_nasid(int nid)
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
{
- return uv_blade_info[uv_node_to_blade_id(nid)].nasid;
+ return uv_blade_info[uv_node_to_blade_id(nid)].pnode;
}
/* Maximum possible number of blades */
diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h
index 3b69fe6b637..151fd7fcb80 100644
--- a/include/asm-x86/uv/uv_mmrs.h
+++ b/include/asm-x86/uv/uv_mmrs.h
@@ -11,17 +11,290 @@
#ifndef __ASM_X86_UV_MMRS__
#define __ASM_X86_UV_MMRS__
-/*
- * AUTO GENERATED - Do not edit
- */
+#define UV_MMR_ENABLE (1UL << 63)
+
+/* ========================================================================= */
+/* UVH_BAU_DATA_CONFIG */
+/* ========================================================================= */
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x0438
+
+#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
+#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
+#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
+#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
+#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_BAU_DATA_CONFIG_P_SHFT 13
+#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_BAU_DATA_CONFIG_T_SHFT 15
+#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_BAU_DATA_CONFIG_M_SHFT 16
+#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
+#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_bau_data_config_u {
+ unsigned long v;
+ struct uvh_bau_data_config_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long dm : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long status : 1; /* RO */
+ unsigned long p : 1; /* RO */
+ unsigned long rsvd_14 : 1; /* */
+ unsigned long t : 1; /* RO */
+ unsigned long m : 1; /* RW */
+ unsigned long rsvd_17_31: 15; /* */
+ unsigned long apic_id : 32; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_EVENT_OCCURRED0 */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x005e8
+
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
+#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
+#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
+#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
+#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
+#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
+#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
+#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
+#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
+#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
+#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
+#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
+#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
+union uvh_event_occurred0_u {
+ unsigned long v;
+ struct uvh_event_occurred0_s {
+ unsigned long lb_hcerr : 1; /* RW, W1C */
+ unsigned long gr0_hcerr : 1; /* RW, W1C */
+ unsigned long gr1_hcerr : 1; /* RW, W1C */
+ unsigned long lh_hcerr : 1; /* RW, W1C */
+ unsigned long rh_hcerr : 1; /* RW, W1C */
+ unsigned long xn_hcerr : 1; /* RW, W1C */
+ unsigned long si_hcerr : 1; /* RW, W1C */
+ unsigned long lb_aoerr0 : 1; /* RW, W1C */
+ unsigned long gr0_aoerr0 : 1; /* RW, W1C */
+ unsigned long gr1_aoerr0 : 1; /* RW, W1C */
+ unsigned long lh_aoerr0 : 1; /* RW, W1C */
+ unsigned long rh_aoerr0 : 1; /* RW, W1C */
+ unsigned long xn_aoerr0 : 1; /* RW, W1C */
+ unsigned long si_aoerr0 : 1; /* RW, W1C */
+ unsigned long lb_aoerr1 : 1; /* RW, W1C */
+ unsigned long gr0_aoerr1 : 1; /* RW, W1C */
+ unsigned long gr1_aoerr1 : 1; /* RW, W1C */
+ unsigned long lh_aoerr1 : 1; /* RW, W1C */
+ unsigned long rh_aoerr1 : 1; /* RW, W1C */
+ unsigned long xn_aoerr1 : 1; /* RW, W1C */
+ unsigned long si_aoerr1 : 1; /* RW, W1C */
+ unsigned long rh_vpi_int : 1; /* RW, W1C */
+ unsigned long system_shutdown_int : 1; /* RW, W1C */
+ unsigned long lb_irq_int_0 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_1 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_2 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_3 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_4 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_5 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_6 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_7 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_8 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_9 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_10 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_11 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_12 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_13 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_14 : 1; /* RW, W1C */
+ unsigned long lb_irq_int_15 : 1; /* RW, W1C */
+ unsigned long l1_nmi_int : 1; /* RW, W1C */
+ unsigned long stop_clock : 1; /* RW, W1C */
+ unsigned long asic_to_l1 : 1; /* RW, W1C */
+ unsigned long l1_to_asic : 1; /* RW, W1C */
+ unsigned long ltc_int : 1; /* RW, W1C */
+ unsigned long la_seq_trigger : 1; /* RW, W1C */
+ unsigned long ipi_int : 1; /* RW, W1C */
+ unsigned long extio_int0 : 1; /* RW, W1C */
+ unsigned long extio_int1 : 1; /* RW, W1C */
+ unsigned long extio_int2 : 1; /* RW, W1C */
+ unsigned long extio_int3 : 1; /* RW, W1C */
+ unsigned long profile_int : 1; /* RW, W1C */
+ unsigned long rtc0 : 1; /* RW, W1C */
+ unsigned long rtc1 : 1; /* RW, W1C */
+ unsigned long rtc2 : 1; /* RW, W1C */
+ unsigned long rtc3 : 1; /* RW, W1C */
+ unsigned long bau_data : 1; /* RW, W1C */
+ unsigned long power_management_req : 1; /* RW, W1C */
+ unsigned long rsvd_57_63 : 7; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_EVENT_OCCURRED0_ALIAS */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
+
+/* ========================================================================= */
+/* UVH_INT_CMPB */
+/* ========================================================================= */
+#define UVH_INT_CMPB 0x22080UL
+
+#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpb_u {
+ unsigned long v;
+ struct uvh_int_cmpb_s {
+ unsigned long real_time_cmpb : 56; /* RW */
+ unsigned long rsvd_56_63 : 8; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_INT_CMPC */
+/* ========================================================================= */
+#define UVH_INT_CMPC 0x22100UL
+
+#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpc_u {
+ unsigned long v;
+ struct uvh_int_cmpc_s {
+ unsigned long real_time_cmpc : 56; /* RW */
+ unsigned long rsvd_56_63 : 8; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_INT_CMPD */
+/* ========================================================================= */
+#define UVH_INT_CMPD 0x22180UL
- #define UV_MMR_ENABLE (1UL << 63)
+#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpd_u {
+ unsigned long v;
+ struct uvh_int_cmpd_s {
+ unsigned long real_time_cmpd : 56; /* RW */
+ unsigned long rsvd_56_63 : 8; /* */
+ } s;
+};
/* ========================================================================= */
/* UVH_IPI_INT */
/* ========================================================================= */
#define UVH_IPI_INT 0x60500UL
-#define UVH_IPI_INT_32 0x0360
+#define UVH_IPI_INT_32 0x0348
#define UVH_IPI_INT_VECTOR_SHFT 0
#define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL
@@ -51,7 +324,7 @@ union uvh_ipi_int_u {
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST */
/* ========================================================================= */
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009f0
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009c0
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
@@ -73,7 +346,7 @@ union uvh_lb_bau_intd_payload_queue_first_u {
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST */
/* ========================================================================= */
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009f8
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009c8
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
@@ -91,7 +364,7 @@ union uvh_lb_bau_intd_payload_queue_last_u {
/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL */
/* ========================================================================= */
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x00a00
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x009d0
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
@@ -109,6 +382,7 @@ union uvh_lb_bau_intd_payload_queue_tail_u {
/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */
/* ========================================================================= */
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0a68
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
@@ -169,12 +443,13 @@ union uvh_lb_bau_intd_software_acknowledge_u {
/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */
/* ========================================================================= */
#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70
/* ========================================================================= */
/* UVH_LB_BAU_SB_ACTIVATION_CONTROL */
/* ========================================================================= */
#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009d8
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009a8
#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL
@@ -197,7 +472,7 @@ union uvh_lb_bau_sb_activation_control_u {
/* UVH_LB_BAU_SB_ACTIVATION_STATUS_0 */
/* ========================================================================= */
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009e0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009b0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
@@ -213,7 +488,7 @@ union uvh_lb_bau_sb_activation_status_0_u {
/* UVH_LB_BAU_SB_ACTIVATION_STATUS_1 */
/* ========================================================================= */
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009e8
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009b8
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
@@ -229,7 +504,7 @@ union uvh_lb_bau_sb_activation_status_1_u {
/* UVH_LB_BAU_SB_DESCRIPTOR_BASE */
/* ========================================================================= */
#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009d0
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009a0
#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
@@ -248,6 +523,334 @@ union uvh_lb_bau_sb_descriptor_base_u {
};
/* ========================================================================= */
+/* UVH_LB_MCAST_AOERR0_RPT_ENABLE */
+/* ========================================================================= */
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL
+
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_SHFT 22
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_MASK 0x0000000000400000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_SHFT 23
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_MASK 0x0000000000800000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 24
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000001000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 25
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000002000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 26
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000004000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 27
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000008000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 28
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000010000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 29
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000020000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 30
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000040000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 31
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000080000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 32
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000100000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 33
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000200000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 34
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000400000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 35
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000800000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 36
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000001000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 37
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000002000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 38
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000004000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 39
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000008000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 40
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000010000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 41
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000020000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 42
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000040000000000UL
+
+union uvh_lb_mcast_aoerr0_rpt_enable_u {
+ unsigned long v;
+ struct uvh_lb_mcast_aoerr0_rpt_enable_s {
+ unsigned long mcast_obese_msg : 1; /* RW */
+ unsigned long mcast_data_sb_err : 1; /* RW */
+ unsigned long mcast_nack_buff_parity : 1; /* RW */
+ unsigned long mcast_timeout : 1; /* RW */
+ unsigned long mcast_inactive_reply : 1; /* RW */
+ unsigned long mcast_upgrade_error : 1; /* RW */
+ unsigned long mcast_reg_count_underflow : 1; /* RW */
+ unsigned long mcast_rep_obese_msg : 1; /* RW */
+ unsigned long ucache_req_runt_msg : 1; /* RW */
+ unsigned long ucache_req_obese_msg : 1; /* RW */
+ unsigned long ucache_req_data_sb_err : 1; /* RW */
+ unsigned long ucache_rep_runt_msg : 1; /* RW */
+ unsigned long ucache_rep_obese_msg : 1; /* RW */
+ unsigned long ucache_rep_data_sb_err : 1; /* RW */
+ unsigned long ucache_rep_command_err : 1; /* RW */
+ unsigned long ucache_pend_timeout : 1; /* RW */
+ unsigned long macc_req_runt_msg : 1; /* RW */
+ unsigned long macc_req_obese_msg : 1; /* RW */
+ unsigned long macc_req_data_sb_err : 1; /* RW */
+ unsigned long macc_rep_runt_msg : 1; /* RW */
+ unsigned long macc_rep_obese_msg : 1; /* RW */
+ unsigned long macc_rep_data_sb_err : 1; /* RW */
+ unsigned long macc_amo_timeout : 1; /* RW */
+ unsigned long macc_put_timeout : 1; /* RW */
+ unsigned long macc_spurious_event : 1; /* RW */
+ unsigned long ioh_destination_table_parity : 1; /* RW */
+ unsigned long get_had_error_reply : 1; /* RW */
+ unsigned long get_timeout : 1; /* RW */
+ unsigned long lock_manager_had_error_reply : 1; /* RW */
+ unsigned long put_had_error_reply : 1; /* RW */
+ unsigned long put_timeout : 1; /* RW */
+ unsigned long sb_activation_overrun : 1; /* RW */
+ unsigned long completed_gb_activation_had_error_reply : 1; /* RW */
+ unsigned long completed_gb_activation_timeout : 1; /* RW */
+ unsigned long descriptor_buffer_0_parity : 1; /* RW */
+ unsigned long descriptor_buffer_1_parity : 1; /* RW */
+ unsigned long socket_destination_table_parity : 1; /* RW */
+ unsigned long bau_reply_payload_corruption : 1; /* RW */
+ unsigned long io_port_destination_table_parity : 1; /* RW */
+ unsigned long intd_soft_ack_timeout : 1; /* RW */
+ unsigned long int_rep_obese_msg : 1; /* RW */
+ unsigned long int_rep_command_err : 1; /* RW */
+ unsigned long int_timeout : 1; /* RW */
+ unsigned long rsvd_43_63 : 21; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LOCAL_INT0_CONFIG */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_CONFIG 0x61000UL
+
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8
+#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12
+#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13
+#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15
+#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16
+#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_local_int0_config_u {
+ unsigned long v;
+ struct uvh_local_int0_config_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long dm : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long status : 1; /* RO */
+ unsigned long p : 1; /* RO */
+ unsigned long rsvd_14 : 1; /* */
+ unsigned long t : 1; /* RO */
+ unsigned long m : 1; /* RW */
+ unsigned long rsvd_17_31: 15; /* */
+ unsigned long apic_id : 32; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LOCAL_INT0_ENABLE */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_ENABLE 0x65000UL
+
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+
+union uvh_local_int0_enable_u {
+ unsigned long v;
+ struct uvh_local_int0_enable_s {
+ unsigned long lb_hcerr : 1; /* RW */
+ unsigned long gr0_hcerr : 1; /* RW */
+ unsigned long gr1_hcerr : 1; /* RW */
+ unsigned long lh_hcerr : 1; /* RW */
+ unsigned long rh_hcerr : 1; /* RW */
+ unsigned long xn_hcerr : 1; /* RW */
+ unsigned long si_hcerr : 1; /* RW */
+ unsigned long lb_aoerr0 : 1; /* RW */
+ unsigned long gr0_aoerr0 : 1; /* RW */
+ unsigned long gr1_aoerr0 : 1; /* RW */
+ unsigned long lh_aoerr0 : 1; /* RW */
+ unsigned long rh_aoerr0 : 1; /* RW */
+ unsigned long xn_aoerr0 : 1; /* RW */
+ unsigned long si_aoerr0 : 1; /* RW */
+ unsigned long lb_aoerr1 : 1; /* RW */
+ unsigned long gr0_aoerr1 : 1; /* RW */
+ unsigned long gr1_aoerr1 : 1; /* RW */
+ unsigned long lh_aoerr1 : 1; /* RW */
+ unsigned long rh_aoerr1 : 1; /* RW */
+ unsigned long xn_aoerr1 : 1; /* RW */
+ unsigned long si_aoerr1 : 1; /* RW */
+ unsigned long rh_vpi_int : 1; /* RW */
+ unsigned long system_shutdown_int : 1; /* RW */
+ unsigned long lb_irq_int_0 : 1; /* RW */
+ unsigned long lb_irq_int_1 : 1; /* RW */
+ unsigned long lb_irq_int_2 : 1; /* RW */
+ unsigned long lb_irq_int_3 : 1; /* RW */
+ unsigned long lb_irq_int_4 : 1; /* RW */
+ unsigned long lb_irq_int_5 : 1; /* RW */
+ unsigned long lb_irq_int_6 : 1; /* RW */
+ unsigned long lb_irq_int_7 : 1; /* RW */
+ unsigned long lb_irq_int_8 : 1; /* RW */
+ unsigned long lb_irq_int_9 : 1; /* RW */
+ unsigned long lb_irq_int_10 : 1; /* RW */
+ unsigned long lb_irq_int_11 : 1; /* RW */
+ unsigned long lb_irq_int_12 : 1; /* RW */
+ unsigned long lb_irq_int_13 : 1; /* RW */
+ unsigned long lb_irq_int_14 : 1; /* RW */
+ unsigned long lb_irq_int_15 : 1; /* RW */
+ unsigned long l1_nmi_int : 1; /* RW */
+ unsigned long stop_clock : 1; /* RW */
+ unsigned long asic_to_l1 : 1; /* RW */
+ unsigned long l1_to_asic : 1; /* RW */
+ unsigned long ltc_int : 1; /* RW */
+ unsigned long la_seq_trigger : 1; /* RW */
+ unsigned long rsvd_45_63 : 19; /* */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_NODE_ID */
/* ========================================================================= */
#define UVH_NODE_ID 0x0UL
@@ -284,14 +887,101 @@ union uvh_node_id_u {
};
/* ========================================================================= */
+/* UVH_NODE_PRESENT_TABLE */
+/* ========================================================================= */
+#define UVH_NODE_PRESENT_TABLE 0x1400UL
+#define UVH_NODE_PRESENT_TABLE_DEPTH 16
+
+#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0
+#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL
+
+union uvh_node_present_table_u {
+ unsigned long v;
+ struct uvh_node_present_table_s {
+ unsigned long nodes : 64; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR 0x1600020UL
+
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_cfg_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_cfg_overlay_config_mmr_s {
+ unsigned long rsvd_0_25: 26; /* */
+ unsigned long base : 20; /* RW */
+ unsigned long rsvd_46_62: 17; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 46
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
@@ -302,8 +992,9 @@ union uvh_rh_gam_gru_overlay_config_mmr_u {
struct uvh_rh_gam_gru_overlay_config_mmr_s {
unsigned long rsvd_0_27: 28; /* */
unsigned long base : 18; /* RW */
+ unsigned long rsvd_46_47: 2; /* */
unsigned long gr4 : 1; /* RW */
- unsigned long rsvd_47_51: 5; /* */
+ unsigned long rsvd_49_51: 3; /* */
unsigned long n_gru : 4; /* RW */
unsigned long rsvd_56_62: 7; /* */
unsigned long enable : 1; /* RW */
@@ -311,6 +1002,32 @@ union uvh_rh_gam_gru_overlay_config_mmr_u {
};
/* ========================================================================= */
+/* UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
+
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmioh_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_mmioh_overlay_config_mmr_s {
+ unsigned long rsvd_0_29: 30; /* */
+ unsigned long base : 16; /* RW */
+ unsigned long m_io : 6; /* RW */
+ unsigned long n_io : 4; /* RW */
+ unsigned long rsvd_56_62: 7; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
@@ -336,7 +1053,7 @@ union uvh_rh_gam_mmr_overlay_config_mmr_u {
/* ========================================================================= */
/* UVH_RTC */
/* ========================================================================= */
-#define UVH_RTC 0x28000UL
+#define UVH_RTC 0x340000UL
#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
@@ -350,6 +1067,139 @@ union uvh_rtc_u {
};
/* ========================================================================= */
+/* UVH_RTC1_INT_CONFIG */
+/* ========================================================================= */
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
+
+#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC1_INT_CONFIG_P_SHFT 13
+#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC1_INT_CONFIG_T_SHFT 15
+#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC1_INT_CONFIG_M_SHFT 16
+#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc1_int_config_u {
+ unsigned long v;
+ struct uvh_rtc1_int_config_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long dm : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long status : 1; /* RO */
+ unsigned long p : 1; /* RO */
+ unsigned long rsvd_14 : 1; /* */
+ unsigned long t : 1; /* RO */
+ unsigned long m : 1; /* RW */
+ unsigned long rsvd_17_31: 15; /* */
+ unsigned long apic_id : 32; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RTC2_INT_CONFIG */
+/* ========================================================================= */
+#define UVH_RTC2_INT_CONFIG 0x61600UL
+
+#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC2_INT_CONFIG_P_SHFT 13
+#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC2_INT_CONFIG_T_SHFT 15
+#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC2_INT_CONFIG_M_SHFT 16
+#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc2_int_config_u {
+ unsigned long v;
+ struct uvh_rtc2_int_config_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long dm : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long status : 1; /* RO */
+ unsigned long p : 1; /* RO */
+ unsigned long rsvd_14 : 1; /* */
+ unsigned long t : 1; /* RO */
+ unsigned long m : 1; /* RW */
+ unsigned long rsvd_17_31: 15; /* */
+ unsigned long apic_id : 32; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RTC3_INT_CONFIG */
+/* ========================================================================= */
+#define UVH_RTC3_INT_CONFIG 0x61640UL
+
+#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC3_INT_CONFIG_P_SHFT 13
+#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC3_INT_CONFIG_T_SHFT 15
+#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC3_INT_CONFIG_M_SHFT 16
+#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc3_int_config_u {
+ unsigned long v;
+ struct uvh_rtc3_int_config_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long dm : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long status : 1; /* RO */
+ unsigned long p : 1; /* RO */
+ unsigned long rsvd_14 : 1; /* */
+ unsigned long t : 1; /* RO */
+ unsigned long m : 1; /* RW */
+ unsigned long rsvd_17_31: 15; /* */
+ unsigned long apic_id : 32; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RTC_INC_RATIO */
+/* ========================================================================= */
+#define UVH_RTC_INC_RATIO 0x350000UL
+
+#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
+#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
+#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
+#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
+
+union uvh_rtc_inc_ratio_u {
+ unsigned long v;
+ struct uvh_rtc_inc_ratio_s {
+ unsigned long fraction : 20; /* RW */
+ unsigned long ratio : 3; /* RW */
+ unsigned long rsvd_23_63: 41; /* */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_SI_ADDR_MAP_CONFIG */
/* ========================================================================= */
#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
@@ -369,5 +1219,77 @@ union uvh_si_addr_map_config_u {
} s;
};
+/* ========================================================================= */
+/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias0_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias1_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias2_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
#endif /* __ASM_X86_UV_MMRS__ */
diff --git a/include/asm-x86/mach-visws/cobalt.h b/include/asm-x86/visws/cobalt.h
index 995258831b7..995258831b7 100644
--- a/include/asm-x86/mach-visws/cobalt.h
+++ b/include/asm-x86/visws/cobalt.h
diff --git a/include/asm-x86/mach-visws/lithium.h b/include/asm-x86/visws/lithium.h
index dfcd4f07ab8..dfcd4f07ab8 100644
--- a/include/asm-x86/mach-visws/lithium.h
+++ b/include/asm-x86/visws/lithium.h
diff --git a/include/asm-x86/mach-visws/piix4.h b/include/asm-x86/visws/piix4.h
index 83ea4f46e41..83ea4f46e41 100644
--- a/include/asm-x86/mach-visws/piix4.h
+++ b/include/asm-x86/visws/piix4.h
diff --git a/include/asm-x86/visws/sgivw.h b/include/asm-x86/visws/sgivw.h
new file mode 100644
index 00000000000..5fbf63e1003
--- /dev/null
+++ b/include/asm-x86/visws/sgivw.h
@@ -0,0 +1,5 @@
+/*
+ * Frame buffer position and size:
+ */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h
index 074b357146d..5ce351325e0 100644
--- a/include/asm-x86/vm86.h
+++ b/include/asm-x86/vm86.h
@@ -14,12 +14,6 @@
#include <asm/processor-flags.h>
-#ifdef CONFIG_VM86
-#define X86_VM_MASK X86_EFLAGS_VM
-#else
-#define X86_VM_MASK 0 /* No VM86 support */
-#endif
-
#define BIOSSEG 0x0f000
#define CPU_086 0
@@ -121,7 +115,6 @@ struct vm86plus_info_struct {
unsigned long is_vm86pus:1; /* for vm86 internal use */
unsigned char vm86dbg_intxxtab[32]; /* for debugger */
};
-
struct vm86plus_struct {
struct vm86_regs regs;
unsigned long flags;
@@ -133,6 +126,9 @@ struct vm86plus_struct {
};
#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
/*
* This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
* mode - the main change is that the old segment descriptors aren't
@@ -141,7 +137,6 @@ struct vm86plus_struct {
* at the end of the structure. Look at ptrace.h to see the "normal"
* setup. For user space layout see 'struct vm86_regs' above.
*/
-#include <asm/ptrace.h>
struct kernel_vm86_regs {
/*
diff --git a/include/asm-x86/vmi_time.h b/include/asm-x86/vmi_time.h
index 47818813032..c3118c38515 100644
--- a/include/asm-x86/vmi_time.h
+++ b/include/asm-x86/vmi_time.h
@@ -50,7 +50,7 @@ extern void __init vmi_time_init(void);
extern unsigned long vmi_get_wallclock(void);
extern int vmi_set_wallclock(unsigned long now);
extern unsigned long long vmi_sched_clock(void);
-extern unsigned long vmi_cpu_khz(void);
+extern unsigned long vmi_tsc_khz(void);
#ifdef CONFIG_X86_LOCAL_APIC
extern void __devinit vmi_time_bsp_init(void);
diff --git a/include/asm-x86/vsyscall.h b/include/asm-x86/vsyscall.h
index 17b3700949b..6b66ff905af 100644
--- a/include/asm-x86/vsyscall.h
+++ b/include/asm-x86/vsyscall.h
@@ -24,7 +24,8 @@ enum vsyscall_num {
((unused, __section__ (".vsyscall_gtod_data"),aligned(16)))
#define __section_vsyscall_clock __attribute__ \
((unused, __section__ (".vsyscall_clock"),aligned(16)))
-#define __vsyscall_fn __attribute__ ((unused,__section__(".vsyscall_fn")))
+#define __vsyscall_fn \
+ __attribute__ ((unused, __section__(".vsyscall_fn"))) notrace
#define VGETCPU_RDTSCP 1
#define VGETCPU_LSL 2
diff --git a/include/asm-x86/xen/events.h b/include/asm-x86/xen/events.h
index 596312a7bfc..f8d57ea1f05 100644
--- a/include/asm-x86/xen/events.h
+++ b/include/asm-x86/xen/events.h
@@ -4,6 +4,7 @@
enum ipi_vector {
XEN_RESCHEDULE_VECTOR,
XEN_CALL_FUNCTION_VECTOR,
+ XEN_CALL_FUNCTION_SINGLE_VECTOR,
XEN_NR_IPIS,
};
diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
index c2ccd997ed3..2a4f9b41d68 100644
--- a/include/asm-x86/xen/hypercall.h
+++ b/include/asm-x86/xen/hypercall.h
@@ -176,9 +176,9 @@ HYPERVISOR_fpu_taskswitch(int set)
}
static inline int
-HYPERVISOR_sched_op(int cmd, unsigned long arg)
+HYPERVISOR_sched_op(int cmd, void *arg)
{
- return _hypercall2(int, sched_op, cmd, arg);
+ return _hypercall2(int, sched_op_new, cmd, arg);
}
static inline long
@@ -315,6 +315,13 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
}
static inline void
+MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set)
+{
+ mcl->op = __HYPERVISOR_fpu_taskswitch;
+ mcl->args[0] = set;
+}
+
+static inline void
MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
pte_t new_val, unsigned long flags)
{
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index e11f24038b1..377c04591c1 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -26,15 +26,20 @@ typedef struct xpaddr {
#define FOREIGN_FRAME_BIT (1UL<<31)
#define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT)
-extern unsigned long *phys_to_machine_mapping;
+/* Maximum amount of memory we can handle in a domain in pages */
+#define MAX_DOMAIN_PAGES \
+ ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
+
+
+extern unsigned long get_phys_to_machine(unsigned long pfn);
+extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn);
static inline unsigned long pfn_to_mfn(unsigned long pfn)
{
if (xen_feature(XENFEAT_auto_translated_physmap))
return pfn;
- return phys_to_machine_mapping[(unsigned int)(pfn)] &
- ~FOREIGN_FRAME_BIT;
+ return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT;
}
static inline int phys_to_machine_mapping_valid(unsigned long pfn)
@@ -42,7 +47,7 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn)
if (xen_feature(XENFEAT_auto_translated_physmap))
return 1;
- return (phys_to_machine_mapping[pfn] != INVALID_P2M_ENTRY);
+ return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
}
static inline unsigned long mfn_to_pfn(unsigned long mfn)
@@ -106,20 +111,12 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
unsigned long pfn = mfn_to_pfn(mfn);
if ((pfn < max_mapnr)
&& !xen_feature(XENFEAT_auto_translated_physmap)
- && (phys_to_machine_mapping[pfn] != mfn))
+ && (get_phys_to_machine(pfn) != mfn))
return max_mapnr; /* force !pfn_valid() */
+ /* XXX fixme; not true with sparsemem */
return pfn;
}
-static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
-{
- if (xen_feature(XENFEAT_auto_translated_physmap)) {
- BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
- return;
- }
- phys_to_machine_mapping[pfn] = mfn;
-}
-
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v))))
diff --git a/include/asm-x86/xor_32.h b/include/asm-x86/xor_32.h
index 067b5c1835a..921b4584044 100644
--- a/include/asm-x86/xor_32.h
+++ b/include/asm-x86/xor_32.h
@@ -1,3 +1,6 @@
+#ifndef ASM_X86__XOR_32_H
+#define ASM_X86__XOR_32_H
+
/*
* Optimized RAID-5 checksumming functions for MMX and SSE.
*
@@ -881,3 +884,5 @@ do { \
deals with a load to a line that is being prefetched. */
#define XOR_SELECT_TEMPLATE(FASTEST) \
(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
+
+#endif /* ASM_X86__XOR_32_H */
diff --git a/include/asm-x86/xor_64.h b/include/asm-x86/xor_64.h
index 24957e39ac8..2d3a18de295 100644
--- a/include/asm-x86/xor_64.h
+++ b/include/asm-x86/xor_64.h
@@ -1,3 +1,6 @@
+#ifndef ASM_X86__XOR_64_H
+#define ASM_X86__XOR_64_H
+
/*
* Optimized RAID-5 checksumming functions for MMX and SSE.
*
@@ -354,3 +357,5 @@ do { \
We may also be able to load into the L1 only depending on how the cpu
deals with a load to a line that is being prefetched. */
#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
+
+#endif /* ASM_X86__XOR_64_H */
diff --git a/include/crypto/hash.h b/include/crypto/hash.h
new file mode 100644
index 00000000000..d12498ec8a4
--- /dev/null
+++ b/include/crypto/hash.h
@@ -0,0 +1,154 @@
+/*
+ * Hash: Hash algorithms under the crypto API
+ *
+ * Copyright (c) 2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_HASH_H
+#define _CRYPTO_HASH_H
+
+#include <linux/crypto.h>
+
+struct crypto_ahash {
+ struct crypto_tfm base;
+};
+
+static inline struct crypto_ahash *__crypto_ahash_cast(struct crypto_tfm *tfm)
+{
+ return (struct crypto_ahash *)tfm;
+}
+
+static inline struct crypto_ahash *crypto_alloc_ahash(const char *alg_name,
+ u32 type, u32 mask)
+{
+ type &= ~CRYPTO_ALG_TYPE_MASK;
+ mask &= ~CRYPTO_ALG_TYPE_MASK;
+ type |= CRYPTO_ALG_TYPE_AHASH;
+ mask |= CRYPTO_ALG_TYPE_AHASH_MASK;
+
+ return __crypto_ahash_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_ahash_tfm(struct crypto_ahash *tfm)
+{
+ return &tfm->base;
+}
+
+static inline void crypto_free_ahash(struct crypto_ahash *tfm)
+{
+ crypto_free_tfm(crypto_ahash_tfm(tfm));
+}
+
+static inline unsigned int crypto_ahash_alignmask(
+ struct crypto_ahash *tfm)
+{
+ return crypto_tfm_alg_alignmask(crypto_ahash_tfm(tfm));
+}
+
+static inline struct ahash_tfm *crypto_ahash_crt(struct crypto_ahash *tfm)
+{
+ return &crypto_ahash_tfm(tfm)->crt_ahash;
+}
+
+static inline unsigned int crypto_ahash_digestsize(struct crypto_ahash *tfm)
+{
+ return crypto_ahash_crt(tfm)->digestsize;
+}
+
+static inline u32 crypto_ahash_get_flags(struct crypto_ahash *tfm)
+{
+ return crypto_tfm_get_flags(crypto_ahash_tfm(tfm));
+}
+
+static inline void crypto_ahash_set_flags(struct crypto_ahash *tfm, u32 flags)
+{
+ crypto_tfm_set_flags(crypto_ahash_tfm(tfm), flags);
+}
+
+static inline void crypto_ahash_clear_flags(struct crypto_ahash *tfm, u32 flags)
+{
+ crypto_tfm_clear_flags(crypto_ahash_tfm(tfm), flags);
+}
+
+static inline struct crypto_ahash *crypto_ahash_reqtfm(
+ struct ahash_request *req)
+{
+ return __crypto_ahash_cast(req->base.tfm);
+}
+
+static inline unsigned int crypto_ahash_reqsize(struct crypto_ahash *tfm)
+{
+ return crypto_ahash_crt(tfm)->reqsize;
+}
+
+static inline int crypto_ahash_setkey(struct crypto_ahash *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ struct ahash_tfm *crt = crypto_ahash_crt(tfm);
+
+ return crt->setkey(tfm, key, keylen);
+}
+
+static inline int crypto_ahash_digest(struct ahash_request *req)
+{
+ struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+ return crt->digest(req);
+}
+
+static inline void ahash_request_set_tfm(struct ahash_request *req,
+ struct crypto_ahash *tfm)
+{
+ req->base.tfm = crypto_ahash_tfm(tfm);
+}
+
+static inline struct ahash_request *ahash_request_alloc(
+ struct crypto_ahash *tfm, gfp_t gfp)
+{
+ struct ahash_request *req;
+
+ req = kmalloc(sizeof(struct ahash_request) +
+ crypto_ahash_reqsize(tfm), gfp);
+
+ if (likely(req))
+ ahash_request_set_tfm(req, tfm);
+
+ return req;
+}
+
+static inline void ahash_request_free(struct ahash_request *req)
+{
+ kfree(req);
+}
+
+static inline struct ahash_request *ahash_request_cast(
+ struct crypto_async_request *req)
+{
+ return container_of(req, struct ahash_request, base);
+}
+
+static inline void ahash_request_set_callback(struct ahash_request *req,
+ u32 flags,
+ crypto_completion_t complete,
+ void *data)
+{
+ req->base.complete = complete;
+ req->base.data = data;
+ req->base.flags = flags;
+}
+
+static inline void ahash_request_set_crypt(struct ahash_request *req,
+ struct scatterlist *src, u8 *result,
+ unsigned int nbytes)
+{
+ req->src = src;
+ req->nbytes = nbytes;
+ req->result = result;
+}
+
+#endif /* _CRYPTO_HASH_H */
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
new file mode 100644
index 00000000000..917ae57bad4
--- /dev/null
+++ b/include/crypto/internal/hash.h
@@ -0,0 +1,78 @@
+/*
+ * Hash algorithms.
+ *
+ * Copyright (c) 2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_INTERNAL_HASH_H
+#define _CRYPTO_INTERNAL_HASH_H
+
+#include <crypto/algapi.h>
+#include <crypto/hash.h>
+
+struct ahash_request;
+struct scatterlist;
+
+struct crypto_hash_walk {
+ char *data;
+
+ unsigned int offset;
+ unsigned int alignmask;
+
+ struct page *pg;
+ unsigned int entrylen;
+
+ unsigned int total;
+ struct scatterlist *sg;
+
+ unsigned int flags;
+};
+
+extern const struct crypto_type crypto_ahash_type;
+
+int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err);
+int crypto_hash_walk_first(struct ahash_request *req,
+ struct crypto_hash_walk *walk);
+
+static inline void *crypto_ahash_ctx(struct crypto_ahash *tfm)
+{
+ return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline struct ahash_alg *crypto_ahash_alg(
+ struct crypto_ahash *tfm)
+{
+ return &crypto_ahash_tfm(tfm)->__crt_alg->cra_ahash;
+}
+
+static inline int ahash_enqueue_request(struct crypto_queue *queue,
+ struct ahash_request *request)
+{
+ return crypto_enqueue_request(queue, &request->base);
+}
+
+static inline struct ahash_request *ahash_dequeue_request(
+ struct crypto_queue *queue)
+{
+ return ahash_request_cast(crypto_dequeue_request(queue));
+}
+
+static inline void *ahash_request_ctx(struct ahash_request *req)
+{
+ return req->__ctx;
+}
+
+static inline int ahash_tfm_in_queue(struct crypto_queue *queue,
+ struct crypto_ahash *tfm)
+{
+ return crypto_tfm_in_queue(queue, crypto_ahash_tfm(tfm));
+}
+
+#endif /* _CRYPTO_INTERNAL_HASH_H */
+
diff --git a/include/drm/Kbuild b/include/drm/Kbuild
new file mode 100644
index 00000000000..82b6983b7fb
--- /dev/null
+++ b/include/drm/Kbuild
@@ -0,0 +1,10 @@
+unifdef-y += drm.h drm_sarea.h
+unifdef-y += i810_drm.h
+unifdef-y += i830_drm.h
+unifdef-y += i915_drm.h
+unifdef-y += mga_drm.h
+unifdef-y += r128_drm.h
+unifdef-y += radeon_drm.h
+unifdef-y += sis_drm.h
+unifdef-y += savage_drm.h
+unifdef-y += via_drm.h
diff --git a/include/drm/drm.h b/include/drm/drm.h
new file mode 100644
index 00000000000..38d3c6b8276
--- /dev/null
+++ b/include/drm/drm.h
@@ -0,0 +1,694 @@
+/**
+ * \file drm.h
+ * Header for the Direct Rendering Manager
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * \par Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic \c cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if defined(__linux__)
+#if defined(__KERNEL__)
+#endif
+#include <asm/ioctl.h> /* For _IO* macros */
+#define DRM_IOCTL_NR(n) _IOC_NR(n)
+#define DRM_IOC_VOID _IOC_NONE
+#define DRM_IOC_READ _IOC_READ
+#define DRM_IOC_WRITE _IOC_WRITE
+#define DRM_IOC_READWRITE _IOC_READ|_IOC_WRITE
+#define DRM_IOC(dir, group, nr, size) _IOC(dir, group, nr, size)
+#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
+#if defined(__FreeBSD__) && defined(IN_MODULE)
+/* Prevent name collision when including sys/ioccom.h */
+#undef ioctl
+#include <sys/ioccom.h>
+#define ioctl(a,b,c) xf86ioctl(a,b,c)
+#else
+#include <sys/ioccom.h>
+#endif /* __FreeBSD__ && xf86ioctl */
+#define DRM_IOCTL_NR(n) ((n) & 0xff)
+#define DRM_IOC_VOID IOC_VOID
+#define DRM_IOC_READ IOC_OUT
+#define DRM_IOC_WRITE IOC_IN
+#define DRM_IOC_READWRITE IOC_INOUT
+#define DRM_IOC(dir, group, nr, size) _IOC(dir, group, nr, size)
+#endif
+
+#define DRM_MAJOR 226
+#define DRM_MAX_MINOR 15
+
+#define DRM_NAME "drm" /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER 5 /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER 22 /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10 /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD 0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT 0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock) ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock) ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_handle_t;
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/**
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+ unsigned short x1;
+ unsigned short y1;
+ unsigned short x2;
+ unsigned short y2;
+};
+
+/**
+ * Drawable information.
+ */
+struct drm_drawable_info {
+ unsigned int num_rects;
+ struct drm_clip_rect *rects;
+};
+
+/**
+ * Texture region,
+ */
+struct drm_tex_region {
+ unsigned char next;
+ unsigned char prev;
+ unsigned char in_use;
+ unsigned char padding;
+ unsigned int age;
+};
+
+/**
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer. To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+ __volatile__ unsigned int lock; /**< lock variable */
+ char padding[60]; /**< Pad to cache line */
+};
+
+/**
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+ int version_major; /**< Major version */
+ int version_minor; /**< Minor version */
+ int version_patchlevel; /**< Patch level */
+ size_t name_len; /**< Length of name buffer */
+ char __user *name; /**< Name of driver */
+ size_t date_len; /**< Length of date buffer */
+ char __user *date; /**< User-space buffer to hold date */
+ size_t desc_len; /**< Length of desc buffer */
+ char __user *desc; /**< User-space buffer to hold desc */
+};
+
+/**
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+ size_t unique_len; /**< Length of unique */
+ char __user *unique; /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+ int count; /**< Length of user-space structures */
+ struct drm_version __user *version;
+};
+
+struct drm_block {
+ int unused;
+};
+
+/**
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+ enum {
+ DRM_ADD_COMMAND,
+ DRM_RM_COMMAND,
+ DRM_INST_HANDLER,
+ DRM_UNINST_HANDLER
+ } func;
+ int irq;
+};
+
+/**
+ * Type of memory to map.
+ */
+enum drm_map_type {
+ _DRM_FRAME_BUFFER = 0, /**< WC (no caching), no core dump */
+ _DRM_REGISTERS = 1, /**< no caching, no core dump */
+ _DRM_SHM = 2, /**< shared, cached */
+ _DRM_AGP = 3, /**< AGP/GART */
+ _DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */
+ _DRM_CONSISTENT = 5, /**< Consistent memory for PCI DMA */
+};
+
+/**
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+ _DRM_RESTRICTED = 0x01, /**< Cannot be mapped to user-virtual */
+ _DRM_READ_ONLY = 0x02,
+ _DRM_LOCKED = 0x04, /**< shared, cached, locked */
+ _DRM_KERNEL = 0x08, /**< kernel requires access */
+ _DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+ _DRM_CONTAINS_LOCK = 0x20, /**< SHM page that contains lock */
+ _DRM_REMOVABLE = 0x40, /**< Removable mapping */
+ _DRM_DRIVER = 0x80 /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+ unsigned int ctx_id; /**< Context requesting private mapping */
+ void *handle; /**< Handle of map */
+};
+
+/**
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+ unsigned long offset; /**< Requested physical address (0 for SAREA)*/
+ unsigned long size; /**< Requested physical size (bytes) */
+ enum drm_map_type type; /**< Type of memory to map */
+ enum drm_map_flags flags; /**< Flags */
+ void *handle; /**< User-space: "Handle" to pass to mmap() */
+ /**< Kernel-space: kernel-virtual address */
+ int mtrr; /**< MTRR slot used */
+ /* Private data */
+};
+
+/**
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+ int idx; /**< Which client desired? */
+ int auth; /**< Is client authenticated? */
+ unsigned long pid; /**< Process ID */
+ unsigned long uid; /**< User ID */
+ unsigned long magic; /**< Magic */
+ unsigned long iocs; /**< Ioctl count */
+};
+
+enum drm_stat_type {
+ _DRM_STAT_LOCK,
+ _DRM_STAT_OPENS,
+ _DRM_STAT_CLOSES,
+ _DRM_STAT_IOCTLS,
+ _DRM_STAT_LOCKS,
+ _DRM_STAT_UNLOCKS,
+ _DRM_STAT_VALUE, /**< Generic value */
+ _DRM_STAT_BYTE, /**< Generic byte counter (1024bytes/K) */
+ _DRM_STAT_COUNT, /**< Generic non-byte counter (1000/k) */
+
+ _DRM_STAT_IRQ, /**< IRQ */
+ _DRM_STAT_PRIMARY, /**< Primary DMA bytes */
+ _DRM_STAT_SECONDARY, /**< Secondary DMA bytes */
+ _DRM_STAT_DMA, /**< DMA */
+ _DRM_STAT_SPECIAL, /**< Special DMA (e.g., priority or polled) */
+ _DRM_STAT_MISSED /**< Missed DMA opportunity */
+ /* Add to the *END* of the list */
+};
+
+/**
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+ unsigned long count;
+ struct {
+ unsigned long value;
+ enum drm_stat_type type;
+ } data[15];
+};
+
+/**
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+ _DRM_LOCK_READY = 0x01, /**< Wait until hardware is ready for DMA */
+ _DRM_LOCK_QUIESCENT = 0x02, /**< Wait until hardware quiescent */
+ _DRM_LOCK_FLUSH = 0x04, /**< Flush this context's DMA queue first */
+ _DRM_LOCK_FLUSH_ALL = 0x08, /**< Flush all DMA queues first */
+ /* These *HALT* flags aren't supported yet
+ -- they will be used to support the
+ full-screen DGA-like mode. */
+ _DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+ _DRM_HALT_CUR_QUEUES = 0x20 /**< Halt all current queues */
+};
+
+/**
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+ int context;
+ enum drm_lock_flags flags;
+};
+
+/**
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+ /* Flags for DMA buffer dispatch */
+ _DRM_DMA_BLOCK = 0x01, /**<
+ * Block until buffer dispatched.
+ *
+ * \note The buffer may not yet have
+ * been processed by the hardware --
+ * getting a hardware lock with the
+ * hardware quiescent will ensure
+ * that the buffer has been
+ * processed.
+ */
+ _DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+ _DRM_DMA_PRIORITY = 0x04, /**< High priority dispatch */
+
+ /* Flags for DMA buffer request */
+ _DRM_DMA_WAIT = 0x10, /**< Wait for free buffers */
+ _DRM_DMA_SMALLER_OK = 0x20, /**< Smaller-than-requested buffers OK */
+ _DRM_DMA_LARGER_OK = 0x40 /**< Larger-than-requested buffers OK */
+};
+
+/**
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+ int count; /**< Number of buffers of this size */
+ int size; /**< Size in bytes */
+ int low_mark; /**< Low water mark */
+ int high_mark; /**< High water mark */
+ enum {
+ _DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */
+ _DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */
+ _DRM_SG_BUFFER = 0x04, /**< Scatter/gather memory buffer */
+ _DRM_FB_BUFFER = 0x08, /**< Buffer is in frame buffer */
+ _DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+ } flags;
+ unsigned long agp_start; /**<
+ * Start address of where the AGP buffers are
+ * in the AGP aperture
+ */
+};
+
+/**
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+ int count; /**< Entries in list */
+ struct drm_buf_desc __user *list;
+};
+
+/**
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+ int count;
+ int __user *list;
+};
+
+/**
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+ int idx; /**< Index into the master buffer list */
+ int total; /**< Buffer size */
+ int used; /**< Amount of buffer in use (for DMA) */
+ void __user *address; /**< Address of buffer */
+};
+
+/**
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+ int count; /**< Length of the buffer list */
+ void __user *virtual; /**< Mmap'd area in user-virtual */
+ struct drm_buf_pub __user *list; /**< Buffer information */
+};
+
+/**
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+ int context; /**< Context handle */
+ int send_count; /**< Number of buffers to send */
+ int __user *send_indices; /**< List of handles to buffers */
+ int __user *send_sizes; /**< Lengths of data to send */
+ enum drm_dma_flags flags; /**< Flags */
+ int request_count; /**< Number of buffers requested */
+ int request_size; /**< Desired size for buffers */
+ int __user *request_indices; /**< Buffer information */
+ int __user *request_sizes;
+ int granted_count; /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+ _DRM_CONTEXT_PRESERVED = 0x01,
+ _DRM_CONTEXT_2DONLY = 0x02
+};
+
+/**
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+ drm_context_t handle;
+ enum drm_ctx_flags flags;
+};
+
+/**
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+ int count;
+ struct drm_ctx __user *contexts;
+};
+
+/**
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+ drm_drawable_t handle;
+};
+
+/**
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+ DRM_DRAWABLE_CLIPRECTS,
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+ drm_drawable_t handle;
+ unsigned int type;
+ unsigned int num;
+ unsigned long long data;
+};
+
+/**
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+ drm_magic_t magic;
+};
+
+/**
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+ int irq; /**< IRQ number */
+ int busnum; /**< bus number */
+ int devnum; /**< device number */
+ int funcnum; /**< function number */
+};
+
+enum drm_vblank_seq_type {
+ _DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */
+ _DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */
+ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
+ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
+ _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */
+};
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_SIGNAL | _DRM_VBLANK_SECONDARY | \
+ _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+ enum drm_vblank_seq_type type;
+ unsigned int sequence;
+ unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+ enum drm_vblank_seq_type type;
+ unsigned int sequence;
+ long tval_sec;
+ long tval_usec;
+};
+
+/**
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+ struct drm_wait_vblank_request request;
+ struct drm_wait_vblank_reply reply;
+};
+
+/**
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+ unsigned long mode; /**< AGP mode */
+};
+
+/**
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+ unsigned long size; /**< In bytes -- will round to page boundary */
+ unsigned long handle; /**< Used for binding / unbinding */
+ unsigned long type; /**< Type of memory to allocate */
+ unsigned long physical; /**< Physical used by i810 */
+};
+
+/**
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+ unsigned long handle; /**< From drm_agp_buffer */
+ unsigned long offset; /**< In bytes -- will round to page boundary */
+};
+
+/**
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+ int agp_version_major;
+ int agp_version_minor;
+ unsigned long mode;
+ unsigned long aperture_base; /* physical address */
+ unsigned long aperture_size; /* bytes */
+ unsigned long memory_allowed; /* bytes */
+ unsigned long memory_used;
+
+ /* PCI information */
+ unsigned short id_vendor;
+ unsigned short id_device;
+};
+
+/**
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+ unsigned long size; /**< In bytes -- will round to page boundary */
+ unsigned long handle; /**< Used for mapping / unmapping */
+};
+
+/**
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+ int drm_di_major;
+ int drm_di_minor;
+ int drm_dd_major;
+ int drm_dd_minor;
+};
+
+#define DRM_IOCTL_BASE 'd'
+#define DRM_IO(nr) _IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type) _IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type) _IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type) _IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version)
+
+#define DRM_IOCTL_SET_UNIQUE DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_ADD_CTX DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH DRM_IOW( 0x2c, struct drm_lock)
+
+#define DRM_IOCTL_AGP_ACQUIRE DRM_IO( 0x30)
+#define DRM_IOCTL_AGP_RELEASE DRM_IO( 0x31)
+#define DRM_IOCTL_AGP_ENABLE DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, struct drm_update_draw)
+
+/**
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x99.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE 0x40
+#define DRM_COMMAND_END 0xA0
+
+/* typedef area */
+#ifndef __KERNEL__
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+#endif
+
+#endif
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
new file mode 100644
index 00000000000..1c1b13e2922
--- /dev/null
+++ b/include/drm/drmP.h
@@ -0,0 +1,1154 @@
+/**
+ * \file drmP.h
+ * Private header for Direct Rendering Manager
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_P_H_
+#define _DRM_P_H_
+
+/* If you want the memory alloc debug functionality, change define below */
+/* #define DEBUG_MEMORY */
+
+#ifdef __KERNEL__
+#ifdef __alpha__
+/* add include of current.h so that "current" is defined
+ * before static inline funcs in wait.h. Doing this so we
+ * can build the DRM (part of PI DRI). 4/21/2000 S + B */
+#include <asm/current.h>
+#endif /* __alpha__ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/file.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/smp_lock.h> /* For (un)lock_kernel */
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#if defined(__alpha__) || defined(__powerpc__)
+#include <asm/pgtable.h> /* For pte_wrprotect */
+#endif
+#include <asm/io.h>
+#include <asm/mman.h>
+#include <asm/uaccess.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+#if defined(CONFIG_AGP) || defined(CONFIG_AGP_MODULE)
+#include <linux/types.h>
+#include <linux/agp_backend.h>
+#endif
+#include <linux/workqueue.h>
+#include <linux/poll.h>
+#include <asm/pgalloc.h>
+#include "drm.h"
+
+#include <linux/idr.h>
+
+#define __OS_HAS_AGP (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
+#define __OS_HAS_MTRR (defined(CONFIG_MTRR))
+
+struct drm_file;
+struct drm_device;
+
+#include "drm_os_linux.h"
+#include "drm_hashtab.h"
+
+/***********************************************************************/
+/** \name DRM template customization defaults */
+/*@{*/
+
+/* driver capabilities and requirements mask */
+#define DRIVER_USE_AGP 0x1
+#define DRIVER_REQUIRE_AGP 0x2
+#define DRIVER_USE_MTRR 0x4
+#define DRIVER_PCI_DMA 0x8
+#define DRIVER_SG 0x10
+#define DRIVER_HAVE_DMA 0x20
+#define DRIVER_HAVE_IRQ 0x40
+#define DRIVER_IRQ_SHARED 0x80
+#define DRIVER_IRQ_VBL 0x100
+#define DRIVER_DMA_QUEUE 0x200
+#define DRIVER_FB_DMA 0x400
+#define DRIVER_IRQ_VBL2 0x800
+
+/***********************************************************************/
+/** \name Begin the DRM... */
+/*@{*/
+
+#define DRM_DEBUG_CODE 2 /**< Include debugging code if > 1, then
+ also include looping detection. */
+
+#define DRM_MAGIC_HASH_ORDER 4 /**< Size of key hash table. Must be power of 2. */
+#define DRM_KERNEL_CONTEXT 0 /**< Change drm_resctx if changed */
+#define DRM_RESERVED_CONTEXTS 1 /**< Change drm_resctx if changed */
+#define DRM_LOOPING_LIMIT 5000000
+#define DRM_TIME_SLICE (HZ/20) /**< Time slice for GLXContexts */
+#define DRM_LOCK_SLICE 1 /**< Time slice for lock, in jiffies */
+
+#define DRM_FLAG_DEBUG 0x01
+
+#define DRM_MEM_DMA 0
+#define DRM_MEM_SAREA 1
+#define DRM_MEM_DRIVER 2
+#define DRM_MEM_MAGIC 3
+#define DRM_MEM_IOCTLS 4
+#define DRM_MEM_MAPS 5
+#define DRM_MEM_VMAS 6
+#define DRM_MEM_BUFS 7
+#define DRM_MEM_SEGS 8
+#define DRM_MEM_PAGES 9
+#define DRM_MEM_FILES 10
+#define DRM_MEM_QUEUES 11
+#define DRM_MEM_CMDS 12
+#define DRM_MEM_MAPPINGS 13
+#define DRM_MEM_BUFLISTS 14
+#define DRM_MEM_AGPLISTS 15
+#define DRM_MEM_TOTALAGP 16
+#define DRM_MEM_BOUNDAGP 17
+#define DRM_MEM_CTXBITMAP 18
+#define DRM_MEM_STUB 19
+#define DRM_MEM_SGLISTS 20
+#define DRM_MEM_CTXLIST 21
+#define DRM_MEM_MM 22
+#define DRM_MEM_HASHTAB 23
+
+#define DRM_MAX_CTXBITMAP (PAGE_SIZE * 8)
+#define DRM_MAP_HASH_OFFSET 0x10000000
+
+/*@}*/
+
+/***********************************************************************/
+/** \name Macros to make printk easier */
+/*@{*/
+
+/**
+ * Error output.
+ *
+ * \param fmt printf() like format string.
+ * \param arg arguments
+ */
+#define DRM_ERROR(fmt, arg...) \
+ printk(KERN_ERR "[" DRM_NAME ":%s] *ERROR* " fmt , __func__ , ##arg)
+
+/**
+ * Memory error output.
+ *
+ * \param area memory area where the error occurred.
+ * \param fmt printf() like format string.
+ * \param arg arguments
+ */
+#define DRM_MEM_ERROR(area, fmt, arg...) \
+ printk(KERN_ERR "[" DRM_NAME ":%s:%s] *ERROR* " fmt , __func__, \
+ drm_mem_stats[area].name , ##arg)
+
+#define DRM_INFO(fmt, arg...) printk(KERN_INFO "[" DRM_NAME "] " fmt , ##arg)
+
+/**
+ * Debug output.
+ *
+ * \param fmt printf() like format string.
+ * \param arg arguments
+ */
+#if DRM_DEBUG_CODE
+#define DRM_DEBUG(fmt, arg...) \
+ do { \
+ if ( drm_debug ) \
+ printk(KERN_DEBUG \
+ "[" DRM_NAME ":%s] " fmt , \
+ __func__ , ##arg); \
+ } while (0)
+#else
+#define DRM_DEBUG(fmt, arg...) do { } while (0)
+#endif
+
+#define DRM_PROC_LIMIT (PAGE_SIZE-80)
+
+#define DRM_PROC_PRINT(fmt, arg...) \
+ len += sprintf(&buf[len], fmt , ##arg); \
+ if (len > DRM_PROC_LIMIT) { *eof = 1; return len - offset; }
+
+#define DRM_PROC_PRINT_RET(ret, fmt, arg...) \
+ len += sprintf(&buf[len], fmt , ##arg); \
+ if (len > DRM_PROC_LIMIT) { ret; *eof = 1; return len - offset; }
+
+/*@}*/
+
+/***********************************************************************/
+/** \name Internal types and structures */
+/*@{*/
+
+#define DRM_ARRAY_SIZE(x) ARRAY_SIZE(x)
+
+#define DRM_LEFTCOUNT(x) (((x)->rp + (x)->count - (x)->wp) % ((x)->count + 1))
+#define DRM_BUFCOUNT(x) ((x)->count - DRM_LEFTCOUNT(x))
+#define DRM_WAITCOUNT(dev,idx) DRM_BUFCOUNT(&dev->queuelist[idx]->waitlist)
+
+#define DRM_IF_VERSION(maj, min) (maj << 16 | min)
+/**
+ * Get the private SAREA mapping.
+ *
+ * \param _dev DRM device.
+ * \param _ctx context number.
+ * \param _map output mapping.
+ */
+#define DRM_GET_PRIV_SAREA(_dev, _ctx, _map) do { \
+ (_map) = (_dev)->context_sareas[_ctx]; \
+} while(0)
+
+/**
+ * Test that the hardware lock is held by the caller, returning otherwise.
+ *
+ * \param dev DRM device.
+ * \param filp file pointer of the caller.
+ */
+#define LOCK_TEST_WITH_RETURN( dev, file_priv ) \
+do { \
+ if ( !_DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ) || \
+ dev->lock.file_priv != file_priv ) { \
+ DRM_ERROR( "%s called without lock held, held %d owner %p %p\n",\
+ __func__, _DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ),\
+ dev->lock.file_priv, file_priv ); \
+ return -EINVAL; \
+ } \
+} while (0)
+
+/**
+ * Copy and IOCTL return string to user space
+ */
+#define DRM_COPY( name, value ) \
+ len = strlen( value ); \
+ if ( len > name##_len ) len = name##_len; \
+ name##_len = strlen( value ); \
+ if ( len && name ) { \
+ if ( copy_to_user( name, value, len ) ) \
+ return -EFAULT; \
+ }
+
+/**
+ * Ioctl function type.
+ *
+ * \param inode device inode.
+ * \param file_priv DRM file private pointer.
+ * \param cmd command.
+ * \param arg argument.
+ */
+typedef int drm_ioctl_t(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd,
+ unsigned long arg);
+
+#define DRM_AUTH 0x1
+#define DRM_MASTER 0x2
+#define DRM_ROOT_ONLY 0x4
+
+struct drm_ioctl_desc {
+ unsigned int cmd;
+ drm_ioctl_t *func;
+ int flags;
+};
+
+/**
+ * Creates a driver or general drm_ioctl_desc array entry for the given
+ * ioctl, for use by drm_ioctl().
+ */
+#define DRM_IOCTL_DEF(ioctl, func, flags) \
+ [DRM_IOCTL_NR(ioctl)] = {ioctl, func, flags}
+
+struct drm_magic_entry {
+ struct list_head head;
+ struct drm_hash_item hash_item;
+ struct drm_file *priv;
+};
+
+struct drm_vma_entry {
+ struct list_head head;
+ struct vm_area_struct *vma;
+ pid_t pid;
+};
+
+/**
+ * DMA buffer.
+ */
+struct drm_buf {
+ int idx; /**< Index into master buflist */
+ int total; /**< Buffer size */
+ int order; /**< log-base-2(total) */
+ int used; /**< Amount of buffer in use (for DMA) */
+ unsigned long offset; /**< Byte offset (used internally) */
+ void *address; /**< Address of buffer */
+ unsigned long bus_address; /**< Bus address of buffer */
+ struct drm_buf *next; /**< Kernel-only: used for free list */
+ __volatile__ int waiting; /**< On kernel DMA queue */
+ __volatile__ int pending; /**< On hardware DMA queue */
+ wait_queue_head_t dma_wait; /**< Processes waiting */
+ struct drm_file *file_priv; /**< Private of holding file descr */
+ int context; /**< Kernel queue for this buffer */
+ int while_locked; /**< Dispatch this buffer while locked */
+ enum {
+ DRM_LIST_NONE = 0,
+ DRM_LIST_FREE = 1,
+ DRM_LIST_WAIT = 2,
+ DRM_LIST_PEND = 3,
+ DRM_LIST_PRIO = 4,
+ DRM_LIST_RECLAIM = 5
+ } list; /**< Which list we're on */
+
+ int dev_priv_size; /**< Size of buffer private storage */
+ void *dev_private; /**< Per-buffer private storage */
+};
+
+/** bufs is one longer than it has to be */
+struct drm_waitlist {
+ int count; /**< Number of possible buffers */
+ struct drm_buf **bufs; /**< List of pointers to buffers */
+ struct drm_buf **rp; /**< Read pointer */
+ struct drm_buf **wp; /**< Write pointer */
+ struct drm_buf **end; /**< End pointer */
+ spinlock_t read_lock;
+ spinlock_t write_lock;
+};
+
+struct drm_freelist {
+ int initialized; /**< Freelist in use */
+ atomic_t count; /**< Number of free buffers */
+ struct drm_buf *next; /**< End pointer */
+
+ wait_queue_head_t waiting; /**< Processes waiting on free bufs */
+ int low_mark; /**< Low water mark */
+ int high_mark; /**< High water mark */
+ atomic_t wfh; /**< If waiting for high mark */
+ spinlock_t lock;
+};
+
+typedef struct drm_dma_handle {
+ dma_addr_t busaddr;
+ void *vaddr;
+ size_t size;
+} drm_dma_handle_t;
+
+/**
+ * Buffer entry. There is one of this for each buffer size order.
+ */
+struct drm_buf_entry {
+ int buf_size; /**< size */
+ int buf_count; /**< number of buffers */
+ struct drm_buf *buflist; /**< buffer list */
+ int seg_count;
+ int page_order;
+ struct drm_dma_handle **seglist;
+
+ struct drm_freelist freelist;
+};
+
+/** File private data */
+struct drm_file {
+ int authenticated;
+ int master;
+ pid_t pid;
+ uid_t uid;
+ drm_magic_t magic;
+ unsigned long ioctl_count;
+ struct list_head lhead;
+ struct drm_minor *minor;
+ int remove_auth_on_close;
+ unsigned long lock_count;
+ struct file *filp;
+ void *driver_priv;
+};
+
+/** Wait queue */
+struct drm_queue {
+ atomic_t use_count; /**< Outstanding uses (+1) */
+ atomic_t finalization; /**< Finalization in progress */
+ atomic_t block_count; /**< Count of processes waiting */
+ atomic_t block_read; /**< Queue blocked for reads */
+ wait_queue_head_t read_queue; /**< Processes waiting on block_read */
+ atomic_t block_write; /**< Queue blocked for writes */
+ wait_queue_head_t write_queue; /**< Processes waiting on block_write */
+ atomic_t total_queued; /**< Total queued statistic */
+ atomic_t total_flushed; /**< Total flushes statistic */
+ atomic_t total_locks; /**< Total locks statistics */
+ enum drm_ctx_flags flags; /**< Context preserving and 2D-only */
+ struct drm_waitlist waitlist; /**< Pending buffers */
+ wait_queue_head_t flush_queue; /**< Processes waiting until flush */
+};
+
+/**
+ * Lock data.
+ */
+struct drm_lock_data {
+ struct drm_hw_lock *hw_lock; /**< Hardware lock */
+ /** Private of lock holder's file (NULL=kernel) */
+ struct drm_file *file_priv;
+ wait_queue_head_t lock_queue; /**< Queue of blocked processes */
+ unsigned long lock_time; /**< Time of last lock in jiffies */
+ spinlock_t spinlock;
+ uint32_t kernel_waiters;
+ uint32_t user_waiters;
+ int idle_has_lock;
+};
+
+/**
+ * DMA data.
+ */
+struct drm_device_dma {
+
+ struct drm_buf_entry bufs[DRM_MAX_ORDER + 1]; /**< buffers, grouped by their size order */
+ int buf_count; /**< total number of buffers */
+ struct drm_buf **buflist; /**< Vector of pointers into drm_device_dma::bufs */
+ int seg_count;
+ int page_count; /**< number of pages */
+ unsigned long *pagelist; /**< page list */
+ unsigned long byte_count;
+ enum {
+ _DRM_DMA_USE_AGP = 0x01,
+ _DRM_DMA_USE_SG = 0x02,
+ _DRM_DMA_USE_FB = 0x04,
+ _DRM_DMA_USE_PCI_RO = 0x08
+ } flags;
+
+};
+
+/**
+ * AGP memory entry. Stored as a doubly linked list.
+ */
+struct drm_agp_mem {
+ unsigned long handle; /**< handle */
+ DRM_AGP_MEM *memory;
+ unsigned long bound; /**< address */
+ int pages;
+ struct list_head head;
+};
+
+/**
+ * AGP data.
+ *
+ * \sa drm_agp_init() and drm_device::agp.
+ */
+struct drm_agp_head {
+ DRM_AGP_KERN agp_info; /**< AGP device information */
+ struct list_head memory;
+ unsigned long mode; /**< AGP mode */
+ struct agp_bridge_data *bridge;
+ int enabled; /**< whether the AGP bus as been enabled */
+ int acquired; /**< whether the AGP device has been acquired */
+ unsigned long base;
+ int agp_mtrr;
+ int cant_use_aperture;
+ unsigned long page_mask;
+};
+
+/**
+ * Scatter-gather memory.
+ */
+struct drm_sg_mem {
+ unsigned long handle;
+ void *virtual;
+ int pages;
+ struct page **pagelist;
+ dma_addr_t *busaddr;
+};
+
+struct drm_sigdata {
+ int context;
+ struct drm_hw_lock *lock;
+};
+
+
+/*
+ * Generic memory manager structs
+ */
+
+struct drm_mm_node {
+ struct list_head fl_entry;
+ struct list_head ml_entry;
+ int free;
+ unsigned long start;
+ unsigned long size;
+ struct drm_mm *mm;
+ void *private;
+};
+
+struct drm_mm {
+ struct list_head fl_entry;
+ struct list_head ml_entry;
+};
+
+
+/**
+ * Mappings list
+ */
+struct drm_map_list {
+ struct list_head head; /**< list head */
+ struct drm_hash_item hash;
+ struct drm_map *map; /**< mapping */
+ uint64_t user_token;
+};
+
+typedef struct drm_map drm_local_map_t;
+
+/**
+ * Context handle list
+ */
+struct drm_ctx_list {
+ struct list_head head; /**< list head */
+ drm_context_t handle; /**< context handle */
+ struct drm_file *tag; /**< associated fd private data */
+};
+
+struct drm_vbl_sig {
+ struct list_head head;
+ unsigned int sequence;
+ struct siginfo info;
+ struct task_struct *task;
+};
+
+/* location of GART table */
+#define DRM_ATI_GART_MAIN 1
+#define DRM_ATI_GART_FB 2
+
+#define DRM_ATI_GART_PCI 1
+#define DRM_ATI_GART_PCIE 2
+#define DRM_ATI_GART_IGP 3
+
+struct drm_ati_pcigart_info {
+ int gart_table_location;
+ int gart_reg_if;
+ void *addr;
+ dma_addr_t bus_addr;
+ dma_addr_t table_mask;
+ struct drm_dma_handle *table_handle;
+ drm_local_map_t mapping;
+ int table_size;
+};
+
+/**
+ * DRM driver structure. This structure represent the common code for
+ * a family of cards. There will one drm_device for each card present
+ * in this family
+ */
+struct drm_driver {
+ int (*load) (struct drm_device *, unsigned long flags);
+ int (*firstopen) (struct drm_device *);
+ int (*open) (struct drm_device *, struct drm_file *);
+ void (*preclose) (struct drm_device *, struct drm_file *file_priv);
+ void (*postclose) (struct drm_device *, struct drm_file *);
+ void (*lastclose) (struct drm_device *);
+ int (*unload) (struct drm_device *);
+ int (*suspend) (struct drm_device *, pm_message_t state);
+ int (*resume) (struct drm_device *);
+ int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
+ void (*dma_ready) (struct drm_device *);
+ int (*dma_quiescent) (struct drm_device *);
+ int (*context_ctor) (struct drm_device *dev, int context);
+ int (*context_dtor) (struct drm_device *dev, int context);
+ int (*kernel_context_switch) (struct drm_device *dev, int old,
+ int new);
+ void (*kernel_context_switch_unlock) (struct drm_device *dev);
+ int (*vblank_wait) (struct drm_device *dev, unsigned int *sequence);
+ int (*vblank_wait2) (struct drm_device *dev, unsigned int *sequence);
+ int (*dri_library_name) (struct drm_device *dev, char *buf);
+
+ /**
+ * Called by \c drm_device_is_agp. Typically used to determine if a
+ * card is really attached to AGP or not.
+ *
+ * \param dev DRM device handle
+ *
+ * \returns
+ * One of three values is returned depending on whether or not the
+ * card is absolutely \b not AGP (return of 0), absolutely \b is AGP
+ * (return of 1), or may or may not be AGP (return of 2).
+ */
+ int (*device_is_agp) (struct drm_device *dev);
+
+ /* these have to be filled in */
+
+ irqreturn_t(*irq_handler) (DRM_IRQ_ARGS);
+ void (*irq_preinstall) (struct drm_device *dev);
+ void (*irq_postinstall) (struct drm_device *dev);
+ void (*irq_uninstall) (struct drm_device *dev);
+ void (*reclaim_buffers) (struct drm_device *dev,
+ struct drm_file * file_priv);
+ void (*reclaim_buffers_locked) (struct drm_device *dev,
+ struct drm_file *file_priv);
+ void (*reclaim_buffers_idlelocked) (struct drm_device *dev,
+ struct drm_file *file_priv);
+ unsigned long (*get_map_ofs) (struct drm_map * map);
+ unsigned long (*get_reg_ofs) (struct drm_device *dev);
+ void (*set_version) (struct drm_device *dev,
+ struct drm_set_version *sv);
+
+ int major;
+ int minor;
+ int patchlevel;
+ char *name;
+ char *desc;
+ char *date;
+
+ u32 driver_features;
+ int dev_priv_size;
+ struct drm_ioctl_desc *ioctls;
+ int num_ioctls;
+ struct file_operations fops;
+ struct pci_driver pci_driver;
+};
+
+#define DRM_MINOR_UNASSIGNED 0
+#define DRM_MINOR_LEGACY 1
+
+/**
+ * DRM minor structure. This structure represents a drm minor number.
+ */
+struct drm_minor {
+ int index; /**< Minor device number */
+ int type; /**< Control or render */
+ dev_t device; /**< Device number for mknod */
+ struct device kdev; /**< Linux device */
+ struct drm_device *dev;
+ struct proc_dir_entry *dev_root; /**< proc directory entry */
+};
+
+/**
+ * DRM device structure. This structure represent a complete card that
+ * may contain multiple heads.
+ */
+struct drm_device {
+ char *unique; /**< Unique identifier: e.g., busid */
+ int unique_len; /**< Length of unique field */
+ char *devname; /**< For /proc/interrupts */
+ int if_version; /**< Highest interface version set */
+
+ int blocked; /**< Blocked due to VC switch? */
+
+ /** \name Locks */
+ /*@{ */
+ spinlock_t count_lock; /**< For inuse, drm_device::open_count, drm_device::buf_use */
+ struct mutex struct_mutex; /**< For others */
+ /*@} */
+
+ /** \name Usage Counters */
+ /*@{ */
+ int open_count; /**< Outstanding files open */
+ atomic_t ioctl_count; /**< Outstanding IOCTLs pending */
+ atomic_t vma_count; /**< Outstanding vma areas open */
+ int buf_use; /**< Buffers in use -- cannot alloc */
+ atomic_t buf_alloc; /**< Buffer allocation in progress */
+ /*@} */
+
+ /** \name Performance counters */
+ /*@{ */
+ unsigned long counters;
+ enum drm_stat_type types[15];
+ atomic_t counts[15];
+ /*@} */
+
+ /** \name Authentication */
+ /*@{ */
+ struct list_head filelist;
+ struct drm_open_hash magiclist; /**< magic hash table */
+ struct list_head magicfree;
+ /*@} */
+
+ /** \name Memory management */
+ /*@{ */
+ struct list_head maplist; /**< Linked list of regions */
+ int map_count; /**< Number of mappable regions */
+ struct drm_open_hash map_hash; /**< User token hash table for maps */
+
+ /** \name Context handle management */
+ /*@{ */
+ struct list_head ctxlist; /**< Linked list of context handles */
+ int ctx_count; /**< Number of context handles */
+ struct mutex ctxlist_mutex; /**< For ctxlist */
+
+ struct idr ctx_idr;
+
+ struct list_head vmalist; /**< List of vmas (for debugging) */
+ struct drm_lock_data lock; /**< Information on hardware lock */
+ /*@} */
+
+ /** \name DMA queues (contexts) */
+ /*@{ */
+ int queue_count; /**< Number of active DMA queues */
+ int queue_reserved; /**< Number of reserved DMA queues */
+ int queue_slots; /**< Actual length of queuelist */
+ struct drm_queue **queuelist; /**< Vector of pointers to DMA queues */
+ struct drm_device_dma *dma; /**< Optional pointer for DMA support */
+ /*@} */
+
+ /** \name Context support */
+ /*@{ */
+ int irq; /**< Interrupt used by board */
+ int irq_enabled; /**< True if irq handler is enabled */
+ __volatile__ long context_flag; /**< Context swapping flag */
+ __volatile__ long interrupt_flag; /**< Interruption handler flag */
+ __volatile__ long dma_flag; /**< DMA dispatch flag */
+ struct timer_list timer; /**< Timer for delaying ctx switch */
+ wait_queue_head_t context_wait; /**< Processes waiting on ctx switch */
+ int last_checked; /**< Last context checked for DMA */
+ int last_context; /**< Last current context */
+ unsigned long last_switch; /**< jiffies at last context switch */
+ /*@} */
+
+ struct work_struct work;
+ /** \name VBLANK IRQ support */
+ /*@{ */
+
+ wait_queue_head_t vbl_queue; /**< VBLANK wait queue */
+ atomic_t vbl_received;
+ atomic_t vbl_received2; /**< number of secondary VBLANK interrupts */
+ spinlock_t vbl_lock;
+ struct list_head vbl_sigs; /**< signal list to send on VBLANK */
+ struct list_head vbl_sigs2; /**< signals to send on secondary VBLANK */
+ unsigned int vbl_pending;
+ spinlock_t tasklet_lock; /**< For drm_locked_tasklet */
+ void (*locked_tasklet_func)(struct drm_device *dev);
+
+ /*@} */
+ cycles_t ctx_start;
+ cycles_t lck_start;
+
+ struct fasync_struct *buf_async;/**< Processes waiting for SIGIO */
+ wait_queue_head_t buf_readers; /**< Processes waiting to read */
+ wait_queue_head_t buf_writers; /**< Processes waiting to ctx switch */
+
+ struct drm_agp_head *agp; /**< AGP data */
+
+ struct pci_dev *pdev; /**< PCI device structure */
+ int pci_vendor; /**< PCI vendor id */
+ int pci_device; /**< PCI device id */
+#ifdef __alpha__
+ struct pci_controller *hose;
+#endif
+ struct drm_sg_mem *sg; /**< Scatter gather memory */
+ void *dev_private; /**< device private data */
+ struct drm_sigdata sigdata; /**< For block_all_signals */
+ sigset_t sigmask;
+
+ struct drm_driver *driver;
+ drm_local_map_t *agp_buffer_map;
+ unsigned int agp_buffer_token;
+ struct drm_minor *primary; /**< render type primary screen head */
+
+ /** \name Drawable information */
+ /*@{ */
+ spinlock_t drw_lock;
+ struct idr drw_idr;
+ /*@} */
+};
+
+static __inline__ int drm_core_check_feature(struct drm_device *dev,
+ int feature)
+{
+ return ((dev->driver->driver_features & feature) ? 1 : 0);
+}
+
+#ifdef __alpha__
+#define drm_get_pci_domain(dev) dev->hose->index
+#else
+#define drm_get_pci_domain(dev) 0
+#endif
+
+#if __OS_HAS_AGP
+static inline int drm_core_has_AGP(struct drm_device *dev)
+{
+ return drm_core_check_feature(dev, DRIVER_USE_AGP);
+}
+#else
+#define drm_core_has_AGP(dev) (0)
+#endif
+
+#if __OS_HAS_MTRR
+static inline int drm_core_has_MTRR(struct drm_device *dev)
+{
+ return drm_core_check_feature(dev, DRIVER_USE_MTRR);
+}
+
+#define DRM_MTRR_WC MTRR_TYPE_WRCOMB
+
+static inline int drm_mtrr_add(unsigned long offset, unsigned long size,
+ unsigned int flags)
+{
+ return mtrr_add(offset, size, flags, 1);
+}
+
+static inline int drm_mtrr_del(int handle, unsigned long offset,
+ unsigned long size, unsigned int flags)
+{
+ return mtrr_del(handle, offset, size);
+}
+
+#else
+#define drm_core_has_MTRR(dev) (0)
+
+#define DRM_MTRR_WC 0
+
+static inline int drm_mtrr_add(unsigned long offset, unsigned long size,
+ unsigned int flags)
+{
+ return 0;
+}
+
+static inline int drm_mtrr_del(int handle, unsigned long offset,
+ unsigned long size, unsigned int flags)
+{
+ return 0;
+}
+#endif
+
+/******************************************************************/
+/** \name Internal function definitions */
+/*@{*/
+
+ /* Driver support (drm_drv.h) */
+extern int drm_init(struct drm_driver *driver);
+extern void drm_exit(struct drm_driver *driver);
+extern int drm_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg);
+extern long drm_compat_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg);
+extern int drm_lastclose(struct drm_device *dev);
+
+ /* Device support (drm_fops.h) */
+extern int drm_open(struct inode *inode, struct file *filp);
+extern int drm_stub_open(struct inode *inode, struct file *filp);
+extern int drm_fasync(int fd, struct file *filp, int on);
+extern int drm_release(struct inode *inode, struct file *filp);
+
+ /* Mapping support (drm_vm.h) */
+extern int drm_mmap(struct file *filp, struct vm_area_struct *vma);
+extern unsigned long drm_core_get_map_ofs(struct drm_map * map);
+extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev);
+extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait);
+
+ /* Memory management support (drm_memory.h) */
+#include "drm_memory.h"
+extern void drm_mem_init(void);
+extern int drm_mem_info(char *buf, char **start, off_t offset,
+ int request, int *eof, void *data);
+extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area);
+
+extern DRM_AGP_MEM *drm_alloc_agp(struct drm_device *dev, int pages, u32 type);
+extern int drm_free_agp(DRM_AGP_MEM * handle, int pages);
+extern int drm_bind_agp(DRM_AGP_MEM * handle, unsigned int start);
+extern int drm_unbind_agp(DRM_AGP_MEM * handle);
+
+ /* Misc. IOCTL support (drm_ioctl.h) */
+extern int drm_irq_by_busid(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getunique(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_setunique(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getmap(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getclient(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getstats(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_setversion(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_noop(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+ /* Context IOCTL support (drm_context.h) */
+extern int drm_resctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_addctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_modctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_switchctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_newctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_rmctx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+extern int drm_ctxbitmap_init(struct drm_device *dev);
+extern void drm_ctxbitmap_cleanup(struct drm_device *dev);
+extern void drm_ctxbitmap_free(struct drm_device *dev, int ctx_handle);
+
+extern int drm_setsareactx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_getsareactx(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+ /* Drawable IOCTL support (drm_drawable.h) */
+extern int drm_adddraw(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_rmdraw(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_update_drawable_info(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern struct drm_drawable_info *drm_get_drawable_info(struct drm_device *dev,
+ drm_drawable_t id);
+extern void drm_drawable_free_all(struct drm_device *dev);
+
+ /* Authentication IOCTL support (drm_auth.h) */
+extern int drm_getmagic(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_authmagic(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+ /* Locking IOCTL support (drm_lock.h) */
+extern int drm_lock(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_unlock(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_lock_take(struct drm_lock_data *lock_data, unsigned int context);
+extern int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context);
+extern void drm_idlelock_take(struct drm_lock_data *lock_data);
+extern void drm_idlelock_release(struct drm_lock_data *lock_data);
+
+/*
+ * These are exported to drivers so that they can implement fencing using
+ * DMA quiscent + idle. DMA quiescent usually requires the hardware lock.
+ */
+
+extern int drm_i_have_hw_lock(struct drm_device *dev, struct drm_file *file_priv);
+
+ /* Buffer management support (drm_bufs.h) */
+extern int drm_addbufs_agp(struct drm_device *dev, struct drm_buf_desc * request);
+extern int drm_addbufs_pci(struct drm_device *dev, struct drm_buf_desc * request);
+extern int drm_addmap(struct drm_device *dev, unsigned int offset,
+ unsigned int size, enum drm_map_type type,
+ enum drm_map_flags flags, drm_local_map_t ** map_ptr);
+extern int drm_addmap_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_rmmap(struct drm_device *dev, drm_local_map_t *map);
+extern int drm_rmmap_locked(struct drm_device *dev, drm_local_map_t *map);
+extern int drm_rmmap_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_addbufs(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_infobufs(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_markbufs(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_freebufs(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_mapbufs(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_order(unsigned long size);
+extern unsigned long drm_get_resource_start(struct drm_device *dev,
+ unsigned int resource);
+extern unsigned long drm_get_resource_len(struct drm_device *dev,
+ unsigned int resource);
+
+ /* DMA support (drm_dma.h) */
+extern int drm_dma_setup(struct drm_device *dev);
+extern void drm_dma_takedown(struct drm_device *dev);
+extern void drm_free_buffer(struct drm_device *dev, struct drm_buf * buf);
+extern void drm_core_reclaim_buffers(struct drm_device *dev,
+ struct drm_file *filp);
+
+ /* IRQ support (drm_irq.h) */
+extern int drm_control(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern irqreturn_t drm_irq_handler(DRM_IRQ_ARGS);
+extern int drm_irq_uninstall(struct drm_device *dev);
+extern void drm_driver_irq_preinstall(struct drm_device *dev);
+extern void drm_driver_irq_postinstall(struct drm_device *dev);
+extern void drm_driver_irq_uninstall(struct drm_device *dev);
+
+extern int drm_wait_vblank(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
+extern void drm_vbl_send_signals(struct drm_device *dev);
+extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*));
+
+ /* AGP/GART support (drm_agpsupport.h) */
+extern struct drm_agp_head *drm_agp_init(struct drm_device *dev);
+extern int drm_agp_acquire(struct drm_device *dev);
+extern int drm_agp_acquire_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_release(struct drm_device *dev);
+extern int drm_agp_release_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_enable(struct drm_device *dev, struct drm_agp_mode mode);
+extern int drm_agp_enable_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_info(struct drm_device *dev, struct drm_agp_info *info);
+extern int drm_agp_info_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_alloc(struct drm_device *dev, struct drm_agp_buffer *request);
+extern int drm_agp_alloc_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_free(struct drm_device *dev, struct drm_agp_buffer *request);
+extern int drm_agp_free_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_unbind(struct drm_device *dev, struct drm_agp_binding *request);
+extern int drm_agp_unbind_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_agp_bind(struct drm_device *dev, struct drm_agp_binding *request);
+extern int drm_agp_bind_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern DRM_AGP_MEM *drm_agp_allocate_memory(struct agp_bridge_data *bridge, size_t pages, u32 type);
+extern int drm_agp_free_memory(DRM_AGP_MEM * handle);
+extern int drm_agp_bind_memory(DRM_AGP_MEM * handle, off_t start);
+extern int drm_agp_unbind_memory(DRM_AGP_MEM * handle);
+
+ /* Stub support (drm_stub.h) */
+extern int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
+ struct drm_driver *driver);
+extern int drm_put_dev(struct drm_device *dev);
+extern int drm_put_minor(struct drm_minor **minor);
+extern unsigned int drm_debug;
+
+extern struct class *drm_class;
+extern struct proc_dir_entry *drm_proc_root;
+
+extern struct idr drm_minors_idr;
+
+extern drm_local_map_t *drm_getsarea(struct drm_device *dev);
+
+ /* Proc support (drm_proc.h) */
+extern int drm_proc_init(struct drm_minor *minor, int minor_id,
+ struct proc_dir_entry *root);
+extern int drm_proc_cleanup(struct drm_minor *minor, struct proc_dir_entry *root);
+
+ /* Scatter Gather Support (drm_scatter.h) */
+extern void drm_sg_cleanup(struct drm_sg_mem * entry);
+extern int drm_sg_alloc_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request);
+extern int drm_sg_free(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+ /* ATI PCIGART support (ati_pcigart.h) */
+extern int drm_ati_pcigart_init(struct drm_device *dev,
+ struct drm_ati_pcigart_info * gart_info);
+extern int drm_ati_pcigart_cleanup(struct drm_device *dev,
+ struct drm_ati_pcigart_info * gart_info);
+
+extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size,
+ size_t align, dma_addr_t maxaddr);
+extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
+extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
+
+ /* sysfs support (drm_sysfs.c) */
+struct drm_sysfs_class;
+extern struct class *drm_sysfs_create(struct module *owner, char *name);
+extern void drm_sysfs_destroy(void);
+extern int drm_sysfs_device_add(struct drm_minor *minor);
+extern void drm_sysfs_device_remove(struct drm_minor *minor);
+
+/*
+ * Basic memory manager support (drm_mm.c)
+ */
+extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
+ unsigned long size,
+ unsigned alignment);
+extern void drm_mm_put_block(struct drm_mm_node * cur);
+extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, unsigned long size,
+ unsigned alignment, int best_match);
+extern int drm_mm_init(struct drm_mm *mm, unsigned long start, unsigned long size);
+extern void drm_mm_takedown(struct drm_mm *mm);
+extern int drm_mm_clean(struct drm_mm *mm);
+extern unsigned long drm_mm_tail_space(struct drm_mm *mm);
+extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size);
+extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size);
+
+extern void drm_core_ioremap(struct drm_map *map, struct drm_device *dev);
+extern void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev);
+extern void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev);
+
+static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev,
+ unsigned int token)
+{
+ struct drm_map_list *_entry;
+ list_for_each_entry(_entry, &dev->maplist, head)
+ if (_entry->user_token == token)
+ return _entry->map;
+ return NULL;
+}
+
+static __inline__ int drm_device_is_agp(struct drm_device *dev)
+{
+ if (dev->driver->device_is_agp != NULL) {
+ int err = (*dev->driver->device_is_agp) (dev);
+
+ if (err != 2) {
+ return err;
+ }
+ }
+
+ return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
+}
+
+static __inline__ int drm_device_is_pcie(struct drm_device *dev)
+{
+ return pci_find_capability(dev->pdev, PCI_CAP_ID_EXP);
+}
+
+static __inline__ void drm_core_dropmap(struct drm_map *map)
+{
+}
+
+#ifndef DEBUG_MEMORY
+/** Wrapper around kmalloc() */
+static __inline__ void *drm_alloc(size_t size, int area)
+{
+ return kmalloc(size, GFP_KERNEL);
+}
+
+/** Wrapper around kfree() */
+static __inline__ void drm_free(void *pt, size_t size, int area)
+{
+ kfree(pt);
+}
+
+/** Wrapper around kcalloc() */
+static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area)
+{
+ return kcalloc(nmemb, size, GFP_KERNEL);
+}
+#else
+extern void *drm_alloc(size_t size, int area);
+extern void drm_free(void *pt, size_t size, int area);
+extern void *drm_calloc(size_t nmemb, size_t size, int area);
+#endif
+
+/*@}*/
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/drm/drm_core.h b/include/drm/drm_core.h
new file mode 100644
index 00000000000..31673903607
--- /dev/null
+++ b/include/drm/drm_core.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2004 Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#define CORE_AUTHOR "Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl"
+
+#define CORE_NAME "drm"
+#define CORE_DESC "DRM shared core routines"
+#define CORE_DATE "20060810"
+
+#define DRM_IF_MAJOR 1
+#define DRM_IF_MINOR 3
+
+#define CORE_MAJOR 1
+#define CORE_MINOR 1
+#define CORE_PATCHLEVEL 0
diff --git a/include/drm/drm_hashtab.h b/include/drm/drm_hashtab.h
new file mode 100644
index 00000000000..cd2b189e1be
--- /dev/null
+++ b/include/drm/drm_hashtab.h
@@ -0,0 +1,67 @@
+/**************************************************************************
+ *
+ * Copyright 2006 Tungsten Graphics, Inc., Bismack, ND. USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Simple open hash tab implementation.
+ *
+ * Authors:
+ * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef DRM_HASHTAB_H
+#define DRM_HASHTAB_H
+
+#define drm_hash_entry(_ptr, _type, _member) container_of(_ptr, _type, _member)
+
+struct drm_hash_item {
+ struct hlist_node head;
+ unsigned long key;
+};
+
+struct drm_open_hash {
+ unsigned int size;
+ unsigned int order;
+ unsigned int fill;
+ struct hlist_head *table;
+ int use_vmalloc;
+};
+
+
+extern int drm_ht_create(struct drm_open_hash *ht, unsigned int order);
+extern int drm_ht_insert_item(struct drm_open_hash *ht, struct drm_hash_item *item);
+extern int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *item,
+ unsigned long seed, int bits, int shift,
+ unsigned long add);
+extern int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key, struct drm_hash_item **item);
+
+extern void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key);
+extern int drm_ht_remove_key(struct drm_open_hash *ht, unsigned long key);
+extern int drm_ht_remove_item(struct drm_open_hash *ht, struct drm_hash_item *item);
+extern void drm_ht_remove(struct drm_open_hash *ht);
+
+
+#endif
diff --git a/include/drm/drm_memory.h b/include/drm/drm_memory.h
new file mode 100644
index 00000000000..63e425b5ea8
--- /dev/null
+++ b/include/drm/drm_memory.h
@@ -0,0 +1,61 @@
+/**
+ * \file drm_memory.h
+ * Memory management wrappers for DRM
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Created: Thu Feb 4 14:00:34 1999 by faith@valinux.com
+ *
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/highmem.h>
+#include <linux/vmalloc.h>
+#include "drmP.h"
+
+/**
+ * Cut down version of drm_memory_debug.h, which used to be called
+ * drm_memory.h.
+ */
+
+#if __OS_HAS_AGP
+
+#include <linux/vmalloc.h>
+
+#ifdef HAVE_PAGE_AGP
+#include <asm/agp.h>
+#else
+# ifdef __powerpc__
+# define PAGE_AGP __pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
+# else
+# define PAGE_AGP PAGE_KERNEL
+# endif
+#endif
+
+#else /* __OS_HAS_AGP */
+
+#endif
diff --git a/include/drm/drm_memory_debug.h b/include/drm/drm_memory_debug.h
new file mode 100644
index 00000000000..6463271deea
--- /dev/null
+++ b/include/drm/drm_memory_debug.h
@@ -0,0 +1,309 @@
+/**
+ * \file drm_memory_debug.h
+ * Memory management wrappers for DRM.
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+
+typedef struct drm_mem_stats {
+ const char *name;
+ int succeed_count;
+ int free_count;
+ int fail_count;
+ unsigned long bytes_allocated;
+ unsigned long bytes_freed;
+} drm_mem_stats_t;
+
+static DEFINE_SPINLOCK(drm_mem_lock);
+static unsigned long drm_ram_available = 0; /* In pages */
+static unsigned long drm_ram_used = 0;
+static drm_mem_stats_t drm_mem_stats[] =
+{
+ [DRM_MEM_DMA] = {"dmabufs"},
+ [DRM_MEM_SAREA] = {"sareas"},
+ [DRM_MEM_DRIVER] = {"driver"},
+ [DRM_MEM_MAGIC] = {"magic"},
+ [DRM_MEM_IOCTLS] = {"ioctltab"},
+ [DRM_MEM_MAPS] = {"maplist"},
+ [DRM_MEM_VMAS] = {"vmalist"},
+ [DRM_MEM_BUFS] = {"buflist"},
+ [DRM_MEM_SEGS] = {"seglist"},
+ [DRM_MEM_PAGES] = {"pagelist"},
+ [DRM_MEM_FILES] = {"files"},
+ [DRM_MEM_QUEUES] = {"queues"},
+ [DRM_MEM_CMDS] = {"commands"},
+ [DRM_MEM_MAPPINGS] = {"mappings"},
+ [DRM_MEM_BUFLISTS] = {"buflists"},
+ [DRM_MEM_AGPLISTS] = {"agplist"},
+ [DRM_MEM_SGLISTS] = {"sglist"},
+ [DRM_MEM_TOTALAGP] = {"totalagp"},
+ [DRM_MEM_BOUNDAGP] = {"boundagp"},
+ [DRM_MEM_CTXBITMAP] = {"ctxbitmap"},
+ [DRM_MEM_CTXLIST] = {"ctxlist"},
+ [DRM_MEM_STUB] = {"stub"},
+ {NULL, 0,} /* Last entry must be null */
+};
+
+void drm_mem_init (void) {
+ drm_mem_stats_t *mem;
+ struct sysinfo si;
+
+ for (mem = drm_mem_stats; mem->name; ++mem) {
+ mem->succeed_count = 0;
+ mem->free_count = 0;
+ mem->fail_count = 0;
+ mem->bytes_allocated = 0;
+ mem->bytes_freed = 0;
+ }
+
+ si_meminfo(&si);
+ drm_ram_available = si.totalram;
+ drm_ram_used = 0;
+}
+
+/* drm_mem_info is called whenever a process reads /dev/drm/mem. */
+
+static int drm__mem_info (char *buf, char **start, off_t offset,
+ int request, int *eof, void *data) {
+ drm_mem_stats_t *pt;
+ int len = 0;
+
+ if (offset > DRM_PROC_LIMIT) {
+ *eof = 1;
+ return 0;
+ }
+
+ *eof = 0;
+ *start = &buf[offset];
+
+ DRM_PROC_PRINT(" total counts "
+ " | outstanding \n");
+ DRM_PROC_PRINT("type alloc freed fail bytes freed"
+ " | allocs bytes\n\n");
+ DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu kB |\n",
+ "system", 0, 0, 0,
+ drm_ram_available << (PAGE_SHIFT - 10));
+ DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu kB |\n",
+ "locked", 0, 0, 0, drm_ram_used >> 10);
+ DRM_PROC_PRINT("\n");
+ for (pt = drm_mem_stats; pt->name; pt++) {
+ DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu %10lu | %6d %10ld\n",
+ pt->name,
+ pt->succeed_count,
+ pt->free_count,
+ pt->fail_count,
+ pt->bytes_allocated,
+ pt->bytes_freed,
+ pt->succeed_count - pt->free_count,
+ (long)pt->bytes_allocated
+ - (long)pt->bytes_freed);
+ }
+
+ if (len > request + offset)
+ return request;
+ *eof = 1;
+ return len - offset;
+}
+
+int drm_mem_info (char *buf, char **start, off_t offset,
+ int len, int *eof, void *data) {
+ int ret;
+
+ spin_lock(&drm_mem_lock);
+ ret = drm__mem_info (buf, start, offset, len, eof, data);
+ spin_unlock(&drm_mem_lock);
+ return ret;
+}
+
+void *drm_alloc (size_t size, int area) {
+ void *pt;
+
+ if (!size) {
+ DRM_MEM_ERROR(area, "Allocating 0 bytes\n");
+ return NULL;
+ }
+
+ if (!(pt = kmalloc(size, GFP_KERNEL))) {
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[area].fail_count;
+ spin_unlock(&drm_mem_lock);
+ return NULL;
+ }
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[area].succeed_count;
+ drm_mem_stats[area].bytes_allocated += size;
+ spin_unlock(&drm_mem_lock);
+ return pt;
+}
+
+void *drm_calloc (size_t nmemb, size_t size, int area) {
+ void *addr;
+
+ addr = drm_alloc (nmemb * size, area);
+ if (addr != NULL)
+ memset((void *)addr, 0, size * nmemb);
+
+ return addr;
+}
+
+void *drm_realloc (void *oldpt, size_t oldsize, size_t size, int area) {
+ void *pt;
+
+ if (!(pt = drm_alloc (size, area)))
+ return NULL;
+ if (oldpt && oldsize) {
+ memcpy(pt, oldpt, oldsize);
+ drm_free (oldpt, oldsize, area);
+ }
+ return pt;
+}
+
+void drm_free (void *pt, size_t size, int area) {
+ int alloc_count;
+ int free_count;
+
+ if (!pt)
+ DRM_MEM_ERROR(area, "Attempt to free NULL pointer\n");
+ else
+ kfree(pt);
+ spin_lock(&drm_mem_lock);
+ drm_mem_stats[area].bytes_freed += size;
+ free_count = ++drm_mem_stats[area].free_count;
+ alloc_count = drm_mem_stats[area].succeed_count;
+ spin_unlock(&drm_mem_lock);
+ if (free_count > alloc_count) {
+ DRM_MEM_ERROR(area, "Excess frees: %d frees, %d allocs\n",
+ free_count, alloc_count);
+ }
+}
+
+#if __OS_HAS_AGP
+
+DRM_AGP_MEM *drm_alloc_agp (drm_device_t *dev, int pages, u32 type) {
+ DRM_AGP_MEM *handle;
+
+ if (!pages) {
+ DRM_MEM_ERROR(DRM_MEM_TOTALAGP, "Allocating 0 pages\n");
+ return NULL;
+ }
+
+ if ((handle = drm_agp_allocate_memory (pages, type))) {
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[DRM_MEM_TOTALAGP].succeed_count;
+ drm_mem_stats[DRM_MEM_TOTALAGP].bytes_allocated
+ += pages << PAGE_SHIFT;
+ spin_unlock(&drm_mem_lock);
+ return handle;
+ }
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[DRM_MEM_TOTALAGP].fail_count;
+ spin_unlock(&drm_mem_lock);
+ return NULL;
+}
+
+int drm_free_agp (DRM_AGP_MEM * handle, int pages) {
+ int alloc_count;
+ int free_count;
+ int retval = -EINVAL;
+
+ if (!handle) {
+ DRM_MEM_ERROR(DRM_MEM_TOTALAGP,
+ "Attempt to free NULL AGP handle\n");
+ return retval;
+ }
+
+ if (drm_agp_free_memory (handle)) {
+ spin_lock(&drm_mem_lock);
+ free_count = ++drm_mem_stats[DRM_MEM_TOTALAGP].free_count;
+ alloc_count = drm_mem_stats[DRM_MEM_TOTALAGP].succeed_count;
+ drm_mem_stats[DRM_MEM_TOTALAGP].bytes_freed
+ += pages << PAGE_SHIFT;
+ spin_unlock(&drm_mem_lock);
+ if (free_count > alloc_count) {
+ DRM_MEM_ERROR(DRM_MEM_TOTALAGP,
+ "Excess frees: %d frees, %d allocs\n",
+ free_count, alloc_count);
+ }
+ return 0;
+ }
+ return retval;
+}
+
+int drm_bind_agp (DRM_AGP_MEM * handle, unsigned int start) {
+ int retcode = -EINVAL;
+
+ if (!handle) {
+ DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
+ "Attempt to bind NULL AGP handle\n");
+ return retcode;
+ }
+
+ if (!(retcode = drm_agp_bind_memory (handle, start))) {
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[DRM_MEM_BOUNDAGP].succeed_count;
+ drm_mem_stats[DRM_MEM_BOUNDAGP].bytes_allocated
+ += handle->page_count << PAGE_SHIFT;
+ spin_unlock(&drm_mem_lock);
+ return retcode;
+ }
+ spin_lock(&drm_mem_lock);
+ ++drm_mem_stats[DRM_MEM_BOUNDAGP].fail_count;
+ spin_unlock(&drm_mem_lock);
+ return retcode;
+}
+
+int drm_unbind_agp (DRM_AGP_MEM * handle) {
+ int alloc_count;
+ int free_count;
+ int retcode = -EINVAL;
+
+ if (!handle) {
+ DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
+ "Attempt to unbind NULL AGP handle\n");
+ return retcode;
+ }
+
+ if ((retcode = drm_agp_unbind_memory (handle)))
+ return retcode;
+ spin_lock(&drm_mem_lock);
+ free_count = ++drm_mem_stats[DRM_MEM_BOUNDAGP].free_count;
+ alloc_count = drm_mem_stats[DRM_MEM_BOUNDAGP].succeed_count;
+ drm_mem_stats[DRM_MEM_BOUNDAGP].bytes_freed
+ += handle->page_count << PAGE_SHIFT;
+ spin_unlock(&drm_mem_lock);
+ if (free_count > alloc_count) {
+ DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
+ "Excess frees: %d frees, %d allocs\n",
+ free_count, alloc_count);
+ }
+ return retcode;
+}
+#endif
diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h
new file mode 100644
index 00000000000..8dbd2572b7c
--- /dev/null
+++ b/include/drm/drm_os_linux.h
@@ -0,0 +1,108 @@
+/**
+ * \file drm_os_linux.h
+ * OS abstraction macros.
+ */
+
+#include <linux/interrupt.h> /* For task queue support */
+#include <linux/delay.h>
+
+/** Current process ID */
+#define DRM_CURRENTPID task_pid_nr(current)
+#define DRM_SUSER(p) capable(CAP_SYS_ADMIN)
+#define DRM_UDELAY(d) udelay(d)
+/** Read a byte from a MMIO region */
+#define DRM_READ8(map, offset) readb(((void __iomem *)(map)->handle) + (offset))
+/** Read a word from a MMIO region */
+#define DRM_READ16(map, offset) readw(((void __iomem *)(map)->handle) + (offset))
+/** Read a dword from a MMIO region */
+#define DRM_READ32(map, offset) readl(((void __iomem *)(map)->handle) + (offset))
+/** Write a byte into a MMIO region */
+#define DRM_WRITE8(map, offset, val) writeb(val, ((void __iomem *)(map)->handle) + (offset))
+/** Write a word into a MMIO region */
+#define DRM_WRITE16(map, offset, val) writew(val, ((void __iomem *)(map)->handle) + (offset))
+/** Write a dword into a MMIO region */
+#define DRM_WRITE32(map, offset, val) writel(val, ((void __iomem *)(map)->handle) + (offset))
+/** Read memory barrier */
+#define DRM_READMEMORYBARRIER() rmb()
+/** Write memory barrier */
+#define DRM_WRITEMEMORYBARRIER() wmb()
+/** Read/write memory barrier */
+#define DRM_MEMORYBARRIER() mb()
+
+/** IRQ handler arguments and return type and values */
+#define DRM_IRQ_ARGS int irq, void *arg
+
+/** AGP types */
+#if __OS_HAS_AGP
+#define DRM_AGP_MEM struct agp_memory
+#define DRM_AGP_KERN struct agp_kern_info
+#else
+/* define some dummy types for non AGP supporting kernels */
+struct no_agp_kern {
+ unsigned long aper_base;
+ unsigned long aper_size;
+};
+#define DRM_AGP_MEM int
+#define DRM_AGP_KERN struct no_agp_kern
+#endif
+
+#if !(__OS_HAS_MTRR)
+static __inline__ int mtrr_add(unsigned long base, unsigned long size,
+ unsigned int type, char increment)
+{
+ return -ENODEV;
+}
+
+static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+ return -ENODEV;
+}
+
+#define MTRR_TYPE_WRCOMB 1
+
+#endif
+
+/** Other copying of data to kernel space */
+#define DRM_COPY_FROM_USER(arg1, arg2, arg3) \
+ copy_from_user(arg1, arg2, arg3)
+/** Other copying of data from kernel space */
+#define DRM_COPY_TO_USER(arg1, arg2, arg3) \
+ copy_to_user(arg1, arg2, arg3)
+/* Macros for copyfrom user, but checking readability only once */
+#define DRM_VERIFYAREA_READ( uaddr, size ) \
+ (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT)
+#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \
+ __copy_from_user(arg1, arg2, arg3)
+#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \
+ __copy_to_user(arg1, arg2, arg3)
+#define DRM_GET_USER_UNCHECKED(val, uaddr) \
+ __get_user(val, uaddr)
+
+#define DRM_HZ HZ
+
+#define DRM_WAIT_ON( ret, queue, timeout, condition ) \
+do { \
+ DECLARE_WAITQUEUE(entry, current); \
+ unsigned long end = jiffies + (timeout); \
+ add_wait_queue(&(queue), &entry); \
+ \
+ for (;;) { \
+ __set_current_state(TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (time_after_eq(jiffies, end)) { \
+ ret = -EBUSY; \
+ break; \
+ } \
+ schedule_timeout((HZ/100 > 1) ? HZ/100 : 1); \
+ if (signal_pending(current)) { \
+ ret = -EINTR; \
+ break; \
+ } \
+ } \
+ __set_current_state(TASK_RUNNING); \
+ remove_wait_queue(&(queue), &entry); \
+} while (0)
+
+#define DRM_WAKEUP( queue ) wake_up_interruptible( queue )
+#define DRM_INIT_WAITQUEUE( queue ) init_waitqueue_head( queue )
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
new file mode 100644
index 00000000000..135bd19499f
--- /dev/null
+++ b/include/drm/drm_pciids.h
@@ -0,0 +1,415 @@
+/*
+ This file is auto-generated from the drm_pciids.txt in the DRM CVS
+ Please contact dri-devel@lists.sf.net to add new cards to this list
+*/
+#define radeon_PCI_IDS \
+ {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x3E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x3E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP}, \
+ {0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \
+ {0x1002, 0x4144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x414A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x414B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4156, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \
+ {0x1002, 0x4242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x4243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x4336, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4337, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+ {0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+ {0x1002, 0x4A48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C5A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E53, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4E56, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+ {0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+ {0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+ {0x1002, 0x5147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+ {0x1002, 0x5148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x514C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x514D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
+ {0x1002, 0x5158, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
+ {0x1002, 0x5159, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x515A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5551, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5554, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x564A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x564B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
+ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5b64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5b65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5c61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5c63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x5d48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5d57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5e4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x710A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x710B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x710C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x710E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x710F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7143, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x714F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x715E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x715F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7183, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7187, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7188, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x718A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x718B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x718C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x718D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x718F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7193, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x719B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x719F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71D2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71D4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71D5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71D6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x71DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7244, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7245, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7247, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7248, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x724F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7280, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7283, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7284, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x728B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x728C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7290, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7291, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7293, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7297, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x791e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+ {0x1002, 0x791f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+ {0, 0, 0}
+
+#define r128_PCI_IDS \
+ {0x1002, 0x4c45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4d46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5041, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5042, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5044, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5045, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5046, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5047, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5048, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5049, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x504F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5245, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5247, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x524b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x524c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x534d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x544C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x5452, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define mga_PCI_IDS \
+ {0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+ {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+ {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \
+ {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \
+ {0, 0, 0}
+
+#define mach64_PCI_IDS \
+ {0x1002, 0x4749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4744, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x474c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x474f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4752, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4753, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x474d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x474e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c53, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1002, 0x4c4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define sisdrv_PCI_IDS \
+ {0x1039, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1039, 0x5300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1039, 0x6300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1039, 0x6330, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+ {0x1039, 0x6351, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1039, 0x7300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x18CA, 0x0040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+ {0x18CA, 0x0042, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+ {0, 0, 0}
+
+#define tdfx_PCI_IDS \
+ {0x121a, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x121a, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x121a, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x121a, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x121a, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x121a, 0x000b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define viadrv_PCI_IDS \
+ {0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_PRO_GROUP_A}, \
+ {0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3344, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3230, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_DX9_0}, \
+ {0x1106, 0x3157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_PRO_GROUP_A}, \
+ {0, 0, 0}
+
+#define i810_PCI_IDS \
+ {0x8086, 0x7121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x7123, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x7125, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x1132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define i830_PCI_IDS \
+ {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define gamma_PCI_IDS \
+ {0x3d3d, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
+
+#define savage_PCI_IDS \
+ {0x5333, 0x8a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+ {0x5333, 0x8a21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+ {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+ {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+ {0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+ {0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+ {0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+ {0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+ {0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+ {0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+ {0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+ {0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+ {0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+ {0x5333, 0x8d03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
+ {0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
+ {0, 0, 0}
+
+#define ffb_PCI_IDS \
+ {0, 0, 0}
+
+#define i915_PCI_IDS \
+ {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0, 0, 0}
diff --git a/include/drm/drm_sarea.h b/include/drm/drm_sarea.h
new file mode 100644
index 00000000000..480037331e4
--- /dev/null
+++ b/include/drm/drm_sarea.h
@@ -0,0 +1,84 @@
+/**
+ * \file drm_sarea.h
+ * \brief SAREA definitions
+ *
+ * \author Michel Dänzer <michel@daenzer.net>
+ */
+
+/*
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_SAREA_H_
+#define _DRM_SAREA_H_
+
+#include "drm.h"
+
+/* SAREA area needs to be at least a page */
+#if defined(__alpha__)
+#define SAREA_MAX 0x2000
+#elif defined(__ia64__)
+#define SAREA_MAX 0x10000 /* 64kB */
+#else
+/* Intel 830M driver needs at least 8k SAREA */
+#define SAREA_MAX 0x2000
+#endif
+
+/** Maximum number of drawables in the SAREA */
+#define SAREA_MAX_DRAWABLES 256
+
+#define SAREA_DRAWABLE_CLAIMED_ENTRY 0x80000000
+
+/** SAREA drawable */
+struct drm_sarea_drawable {
+ unsigned int stamp;
+ unsigned int flags;
+};
+
+/** SAREA frame */
+struct drm_sarea_frame {
+ unsigned int x;
+ unsigned int y;
+ unsigned int width;
+ unsigned int height;
+ unsigned int fullscreen;
+};
+
+/** SAREA */
+struct drm_sarea {
+ /** first thing is always the DRM locking structure */
+ struct drm_hw_lock lock;
+ /** \todo Use readers/writer lock for drm_sarea::drawable_lock */
+ struct drm_hw_lock drawable_lock;
+ struct drm_sarea_drawable drawableTable[SAREA_MAX_DRAWABLES]; /**< drawables */
+ struct drm_sarea_frame frame; /**< frame */
+ drm_context_t dummy_context;
+};
+
+#ifndef __KERNEL__
+typedef struct drm_sarea_drawable drm_sarea_drawable_t;
+typedef struct drm_sarea_frame drm_sarea_frame_t;
+typedef struct drm_sarea drm_sarea_t;
+#endif
+
+#endif /* _DRM_SAREA_H_ */
diff --git a/include/drm/drm_sman.h b/include/drm/drm_sman.h
new file mode 100644
index 00000000000..08ecf83ad5d
--- /dev/null
+++ b/include/drm/drm_sman.h
@@ -0,0 +1,176 @@
+/**************************************************************************
+ *
+ * Copyright 2006 Tungsten Graphics, Inc., Bismarck, ND., USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Simple memory MANager interface that keeps track on allocate regions on a
+ * per "owner" basis. All regions associated with an "owner" can be released
+ * with a simple call. Typically if the "owner" exists. The owner is any
+ * "unsigned long" identifier. Can typically be a pointer to a file private
+ * struct or a context identifier.
+ *
+ * Authors:
+ * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef DRM_SMAN_H
+#define DRM_SMAN_H
+
+#include "drmP.h"
+#include "drm_hashtab.h"
+
+/*
+ * A class that is an abstration of a simple memory allocator.
+ * The sman implementation provides a default such allocator
+ * using the drm_mm.c implementation. But the user can replace it.
+ * See the SiS implementation, which may use the SiS FB kernel module
+ * for memory management.
+ */
+
+struct drm_sman_mm {
+ /* private info. If allocated, needs to be destroyed by the destroy
+ function */
+ void *private;
+
+ /* Allocate a memory block with given size and alignment.
+ Return an opaque reference to the memory block */
+
+ void *(*allocate) (void *private, unsigned long size,
+ unsigned alignment);
+
+ /* Free a memory block. "ref" is the opaque reference that we got from
+ the "alloc" function */
+
+ void (*free) (void *private, void *ref);
+
+ /* Free all resources associated with this allocator */
+
+ void (*destroy) (void *private);
+
+ /* Return a memory offset from the opaque reference returned from the
+ "alloc" function */
+
+ unsigned long (*offset) (void *private, void *ref);
+};
+
+struct drm_memblock_item {
+ struct list_head owner_list;
+ struct drm_hash_item user_hash;
+ void *mm_info;
+ struct drm_sman_mm *mm;
+ struct drm_sman *sman;
+};
+
+struct drm_sman {
+ struct drm_sman_mm *mm;
+ int num_managers;
+ struct drm_open_hash owner_hash_tab;
+ struct drm_open_hash user_hash_tab;
+ struct list_head owner_items;
+};
+
+/*
+ * Take down a memory manager. This function should only be called after a
+ * successful init and after a call to drm_sman_cleanup.
+ */
+
+extern void drm_sman_takedown(struct drm_sman * sman);
+
+/*
+ * Allocate structures for a manager.
+ * num_managers are the number of memory pools to manage. (VRAM, AGP, ....)
+ * user_order is the log2 of the number of buckets in the user hash table.
+ * set this to approximately log2 of the max number of memory regions
+ * that will be allocated for _all_ pools together.
+ * owner_order is the log2 of the number of buckets in the owner hash table.
+ * set this to approximately log2 of
+ * the number of client file connections that will
+ * be using the manager.
+ *
+ */
+
+extern int drm_sman_init(struct drm_sman * sman, unsigned int num_managers,
+ unsigned int user_order, unsigned int owner_order);
+
+/*
+ * Initialize a drm_mm.c allocator. Should be called only once for each
+ * manager unless a customized allogator is used.
+ */
+
+extern int drm_sman_set_range(struct drm_sman * sman, unsigned int manager,
+ unsigned long start, unsigned long size);
+
+/*
+ * Initialize a customized allocator for one of the managers.
+ * (See the SiS module). The object pointed to by "allocator" is copied,
+ * so it can be destroyed after this call.
+ */
+
+extern int drm_sman_set_manager(struct drm_sman * sman, unsigned int mananger,
+ struct drm_sman_mm * allocator);
+
+/*
+ * Allocate a memory block. Aligment is not implemented yet.
+ */
+
+extern struct drm_memblock_item *drm_sman_alloc(struct drm_sman * sman,
+ unsigned int manager,
+ unsigned long size,
+ unsigned alignment,
+ unsigned long owner);
+/*
+ * Free a memory block identified by its user hash key.
+ */
+
+extern int drm_sman_free_key(struct drm_sman * sman, unsigned int key);
+
+/*
+ * returns 1 iff there are no stale memory blocks associated with this owner.
+ * Typically called to determine if we need to idle the hardware and call
+ * drm_sman_owner_cleanup. If there are no stale memory blocks, it removes all
+ * resources associated with owner.
+ */
+
+extern int drm_sman_owner_clean(struct drm_sman * sman, unsigned long owner);
+
+/*
+ * Frees all stale memory blocks associated with this owner. Note that this
+ * requires that the hardware is finished with all blocks, so the graphics engine
+ * should be idled before this call is made. This function also frees
+ * any resources associated with "owner" and should be called when owner
+ * is not going to be referenced anymore.
+ */
+
+extern void drm_sman_owner_cleanup(struct drm_sman * sman, unsigned long owner);
+
+/*
+ * Frees all stale memory blocks associated with the memory manager.
+ * See idling above.
+ */
+
+extern void drm_sman_cleanup(struct drm_sman * sman);
+
+#endif
diff --git a/include/drm/i810_drm.h b/include/drm/i810_drm.h
new file mode 100644
index 00000000000..7a10bb6f2c0
--- /dev/null
+++ b/include/drm/i810_drm.h
@@ -0,0 +1,281 @@
+#ifndef _I810_DRM_H_
+#define _I810_DRM_H_
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _I810_DEFINES_
+#define _I810_DEFINES_
+
+#define I810_DMA_BUF_ORDER 12
+#define I810_DMA_BUF_SZ (1<<I810_DMA_BUF_ORDER)
+#define I810_DMA_BUF_NR 256
+#define I810_NR_SAREA_CLIPRECTS 8
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define I810_NR_TEX_REGIONS 64
+#define I810_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define I810_UPLOAD_TEX0IMAGE 0x1 /* handled clientside */
+#define I810_UPLOAD_TEX1IMAGE 0x2 /* handled clientside */
+#define I810_UPLOAD_CTX 0x4
+#define I810_UPLOAD_BUFFERS 0x8
+#define I810_UPLOAD_TEX0 0x10
+#define I810_UPLOAD_TEX1 0x20
+#define I810_UPLOAD_CLIPRECTS 0x40
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer. These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+/* Destbuffer state
+ * - backbuffer linear offset and pitch -- invarient in the current dri
+ * - zbuffer linear offset and pitch -- also invarient
+ * - drawing origin in back and depth buffers.
+ *
+ * Keep the depth/back buffer state here to accommodate private buffers
+ * in the future.
+ */
+#define I810_DESTREG_DI0 0 /* CMD_OP_DESTBUFFER_INFO (2 dwords) */
+#define I810_DESTREG_DI1 1
+#define I810_DESTREG_DV0 2 /* GFX_OP_DESTBUFFER_VARS (2 dwords) */
+#define I810_DESTREG_DV1 3
+#define I810_DESTREG_DR0 4 /* GFX_OP_DRAWRECT_INFO (4 dwords) */
+#define I810_DESTREG_DR1 5
+#define I810_DESTREG_DR2 6
+#define I810_DESTREG_DR3 7
+#define I810_DESTREG_DR4 8
+#define I810_DEST_SETUP_SIZE 10
+
+/* Context state
+ */
+#define I810_CTXREG_CF0 0 /* GFX_OP_COLOR_FACTOR */
+#define I810_CTXREG_CF1 1
+#define I810_CTXREG_ST0 2 /* GFX_OP_STIPPLE */
+#define I810_CTXREG_ST1 3
+#define I810_CTXREG_VF 4 /* GFX_OP_VERTEX_FMT */
+#define I810_CTXREG_MT 5 /* GFX_OP_MAP_TEXELS */
+#define I810_CTXREG_MC0 6 /* GFX_OP_MAP_COLOR_STAGES - stage 0 */
+#define I810_CTXREG_MC1 7 /* GFX_OP_MAP_COLOR_STAGES - stage 1 */
+#define I810_CTXREG_MC2 8 /* GFX_OP_MAP_COLOR_STAGES - stage 2 */
+#define I810_CTXREG_MA0 9 /* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
+#define I810_CTXREG_MA1 10 /* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
+#define I810_CTXREG_MA2 11 /* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
+#define I810_CTXREG_SDM 12 /* GFX_OP_SRC_DEST_MONO */
+#define I810_CTXREG_FOG 13 /* GFX_OP_FOG_COLOR */
+#define I810_CTXREG_B1 14 /* GFX_OP_BOOL_1 */
+#define I810_CTXREG_B2 15 /* GFX_OP_BOOL_2 */
+#define I810_CTXREG_LCS 16 /* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
+#define I810_CTXREG_PV 17 /* GFX_OP_PV_RULE -- Invarient! */
+#define I810_CTXREG_ZA 18 /* GFX_OP_ZBIAS_ALPHAFUNC */
+#define I810_CTXREG_AA 19 /* GFX_OP_ANTIALIAS */
+#define I810_CTX_SETUP_SIZE 20
+
+/* Texture state (per tex unit)
+ */
+#define I810_TEXREG_MI0 0 /* GFX_OP_MAP_INFO (4 dwords) */
+#define I810_TEXREG_MI1 1
+#define I810_TEXREG_MI2 2
+#define I810_TEXREG_MI3 3
+#define I810_TEXREG_MF 4 /* GFX_OP_MAP_FILTER */
+#define I810_TEXREG_MLC 5 /* GFX_OP_MAP_LOD_CTL */
+#define I810_TEXREG_MLL 6 /* GFX_OP_MAP_LOD_LIMITS */
+#define I810_TEXREG_MCS 7 /* GFX_OP_MAP_COORD_SETS ??? */
+#define I810_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define I810_FRONT 0x1
+#define I810_BACK 0x2
+#define I810_DEPTH 0x4
+
+typedef enum _drm_i810_init_func {
+ I810_INIT_DMA = 0x01,
+ I810_CLEANUP_DMA = 0x02,
+ I810_INIT_DMA_1_4 = 0x03
+} drm_i810_init_func_t;
+
+/* This is the init structure after v1.2 */
+typedef struct _drm_i810_init {
+ drm_i810_init_func_t func;
+ unsigned int mmio_offset;
+ unsigned int buffers_offset;
+ int sarea_priv_offset;
+ unsigned int ring_start;
+ unsigned int ring_end;
+ unsigned int ring_size;
+ unsigned int front_offset;
+ unsigned int back_offset;
+ unsigned int depth_offset;
+ unsigned int overlay_offset;
+ unsigned int overlay_physical;
+ unsigned int w;
+ unsigned int h;
+ unsigned int pitch;
+ unsigned int pitch_bits;
+} drm_i810_init_t;
+
+/* This is the init structure prior to v1.2 */
+typedef struct _drm_i810_pre12_init {
+ drm_i810_init_func_t func;
+ unsigned int mmio_offset;
+ unsigned int buffers_offset;
+ int sarea_priv_offset;
+ unsigned int ring_start;
+ unsigned int ring_end;
+ unsigned int ring_size;
+ unsigned int front_offset;
+ unsigned int back_offset;
+ unsigned int depth_offset;
+ unsigned int w;
+ unsigned int h;
+ unsigned int pitch;
+ unsigned int pitch_bits;
+} drm_i810_pre12_init_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_i810_tex_region {
+ unsigned char next, prev; /* indices to form a circular LRU */
+ unsigned char in_use; /* owned by a client, or free? */
+ int age; /* tracked by clients to update local LRU's */
+} drm_i810_tex_region_t;
+
+typedef struct _drm_i810_sarea {
+ unsigned int ContextState[I810_CTX_SETUP_SIZE];
+ unsigned int BufferState[I810_DEST_SETUP_SIZE];
+ unsigned int TexState[2][I810_TEX_SETUP_SIZE];
+ unsigned int dirty;
+
+ unsigned int nbox;
+ struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
+
+ /* Maintain an LRU of contiguous regions of texture space. If
+ * you think you own a region of texture memory, and it has an
+ * age different to the one you set, then you are mistaken and
+ * it has been stolen by another client. If global texAge
+ * hasn't changed, there is no need to walk the list.
+ *
+ * These regions can be used as a proxy for the fine-grained
+ * texture information of other clients - by maintaining them
+ * in the same lru which is used to age their own textures,
+ * clients have an approximate lru for the whole of global
+ * texture space, and can make informed decisions as to which
+ * areas to kick out. There is no need to choose whether to
+ * kick out your own texture or someone else's - simply eject
+ * them all in LRU order.
+ */
+
+ drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
+ /* Last elt is sentinal */
+ int texAge; /* last time texture was uploaded */
+ int last_enqueue; /* last time a buffer was enqueued */
+ int last_dispatch; /* age of the most recently dispatched buffer */
+ int last_quiescent; /* */
+ int ctxOwner; /* last context to upload state */
+
+ int vertex_prim;
+
+ int pf_enabled; /* is pageflipping allowed? */
+ int pf_active;
+ int pf_current_page; /* which buffer is being displayed? */
+} drm_i810_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmMga.h)
+ */
+
+/* i810 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I810_INIT 0x00
+#define DRM_I810_VERTEX 0x01
+#define DRM_I810_CLEAR 0x02
+#define DRM_I810_FLUSH 0x03
+#define DRM_I810_GETAGE 0x04
+#define DRM_I810_GETBUF 0x05
+#define DRM_I810_SWAP 0x06
+#define DRM_I810_COPY 0x07
+#define DRM_I810_DOCOPY 0x08
+#define DRM_I810_OV0INFO 0x09
+#define DRM_I810_FSTATUS 0x0a
+#define DRM_I810_OV0FLIP 0x0b
+#define DRM_I810_MC 0x0c
+#define DRM_I810_RSTATUS 0x0d
+#define DRM_I810_FLIP 0x0e
+
+#define DRM_IOCTL_I810_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
+#define DRM_IOCTL_I810_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
+#define DRM_IOCTL_I810_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
+#define DRM_IOCTL_I810_FLUSH DRM_IO( DRM_COMMAND_BASE + DRM_I810_FLUSH)
+#define DRM_IOCTL_I810_GETAGE DRM_IO( DRM_COMMAND_BASE + DRM_I810_GETAGE)
+#define DRM_IOCTL_I810_GETBUF DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
+#define DRM_IOCTL_I810_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_I810_SWAP)
+#define DRM_IOCTL_I810_COPY DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
+#define DRM_IOCTL_I810_DOCOPY DRM_IO( DRM_COMMAND_BASE + DRM_I810_DOCOPY)
+#define DRM_IOCTL_I810_OV0INFO DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
+#define DRM_IOCTL_I810_FSTATUS DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
+#define DRM_IOCTL_I810_OV0FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
+#define DRM_IOCTL_I810_MC DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
+#define DRM_IOCTL_I810_RSTATUS DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
+#define DRM_IOCTL_I810_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
+
+typedef struct _drm_i810_clear {
+ int clear_color;
+ int clear_depth;
+ int flags;
+} drm_i810_clear_t;
+
+/* These may be placeholders if we have more cliprects than
+ * I810_NR_SAREA_CLIPRECTS. In that case, the client sets discard to
+ * false, indicating that the buffer will be dispatched again with a
+ * new set of cliprects.
+ */
+typedef struct _drm_i810_vertex {
+ int idx; /* buffer index */
+ int used; /* nr bytes in use */
+ int discard; /* client is finished with the buffer? */
+} drm_i810_vertex_t;
+
+typedef struct _drm_i810_copy_t {
+ int idx; /* buffer index */
+ int used; /* nr bytes in use */
+ void *address; /* Address to copy from */
+} drm_i810_copy_t;
+
+#define PR_TRIANGLES (0x0<<18)
+#define PR_TRISTRIP_0 (0x1<<18)
+#define PR_TRISTRIP_1 (0x2<<18)
+#define PR_TRIFAN (0x3<<18)
+#define PR_POLYGON (0x4<<18)
+#define PR_LINES (0x5<<18)
+#define PR_LINESTRIP (0x6<<18)
+#define PR_RECTS (0x7<<18)
+#define PR_MASK (0x7<<18)
+
+typedef struct drm_i810_dma {
+ void *virtual;
+ int request_idx;
+ int request_size;
+ int granted;
+} drm_i810_dma_t;
+
+typedef struct _drm_i810_overlay_t {
+ unsigned int offset; /* Address of the Overlay Regs */
+ unsigned int physical;
+} drm_i810_overlay_t;
+
+typedef struct _drm_i810_mc {
+ int idx; /* buffer index */
+ int used; /* nr bytes in use */
+ int num_blocks; /* number of GFXBlocks */
+ int *length; /* List of lengths for GFXBlocks (FUTURE) */
+ unsigned int last_render; /* Last Render Request */
+} drm_i810_mc_t;
+
+#endif /* _I810_DRM_H_ */
diff --git a/include/drm/i830_drm.h b/include/drm/i830_drm.h
new file mode 100644
index 00000000000..4b00d2dd4f6
--- /dev/null
+++ b/include/drm/i830_drm.h
@@ -0,0 +1,342 @@
+#ifndef _I830_DRM_H_
+#define _I830_DRM_H_
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ *
+ * KW: Actually, you can't ever change them because doing so would
+ * break backwards compatibility.
+ */
+
+#ifndef _I830_DEFINES_
+#define _I830_DEFINES_
+
+#define I830_DMA_BUF_ORDER 12
+#define I830_DMA_BUF_SZ (1<<I830_DMA_BUF_ORDER)
+#define I830_DMA_BUF_NR 256
+#define I830_NR_SAREA_CLIPRECTS 8
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define I830_NR_TEX_REGIONS 64
+#define I830_LOG_MIN_TEX_REGION_SIZE 16
+
+/* KW: These aren't correct but someone set them to two and then
+ * released the module. Now we can't change them as doing so would
+ * break backwards compatibility.
+ */
+#define I830_TEXTURE_COUNT 2
+#define I830_TEXBLEND_COUNT I830_TEXTURE_COUNT
+
+#define I830_TEXBLEND_SIZE 12 /* (4 args + op) * 2 + COLOR_FACTOR */
+
+#define I830_UPLOAD_CTX 0x1
+#define I830_UPLOAD_BUFFERS 0x2
+#define I830_UPLOAD_CLIPRECTS 0x4
+#define I830_UPLOAD_TEX0_IMAGE 0x100 /* handled clientside */
+#define I830_UPLOAD_TEX0_CUBE 0x200 /* handled clientside */
+#define I830_UPLOAD_TEX1_IMAGE 0x400 /* handled clientside */
+#define I830_UPLOAD_TEX1_CUBE 0x800 /* handled clientside */
+#define I830_UPLOAD_TEX2_IMAGE 0x1000 /* handled clientside */
+#define I830_UPLOAD_TEX2_CUBE 0x2000 /* handled clientside */
+#define I830_UPLOAD_TEX3_IMAGE 0x4000 /* handled clientside */
+#define I830_UPLOAD_TEX3_CUBE 0x8000 /* handled clientside */
+#define I830_UPLOAD_TEX_N_IMAGE(n) (0x100 << (n * 2))
+#define I830_UPLOAD_TEX_N_CUBE(n) (0x200 << (n * 2))
+#define I830_UPLOAD_TEXIMAGE_MASK 0xff00
+#define I830_UPLOAD_TEX0 0x10000
+#define I830_UPLOAD_TEX1 0x20000
+#define I830_UPLOAD_TEX2 0x40000
+#define I830_UPLOAD_TEX3 0x80000
+#define I830_UPLOAD_TEX_N(n) (0x10000 << (n))
+#define I830_UPLOAD_TEX_MASK 0xf0000
+#define I830_UPLOAD_TEXBLEND0 0x100000
+#define I830_UPLOAD_TEXBLEND1 0x200000
+#define I830_UPLOAD_TEXBLEND2 0x400000
+#define I830_UPLOAD_TEXBLEND3 0x800000
+#define I830_UPLOAD_TEXBLEND_N(n) (0x100000 << (n))
+#define I830_UPLOAD_TEXBLEND_MASK 0xf00000
+#define I830_UPLOAD_TEX_PALETTE_N(n) (0x1000000 << (n))
+#define I830_UPLOAD_TEX_PALETTE_SHARED 0x4000000
+#define I830_UPLOAD_STIPPLE 0x8000000
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer. These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+/* Destbuffer state
+ * - backbuffer linear offset and pitch -- invarient in the current dri
+ * - zbuffer linear offset and pitch -- also invarient
+ * - drawing origin in back and depth buffers.
+ *
+ * Keep the depth/back buffer state here to accommodate private buffers
+ * in the future.
+ */
+
+#define I830_DESTREG_CBUFADDR 0
+#define I830_DESTREG_DBUFADDR 1
+#define I830_DESTREG_DV0 2
+#define I830_DESTREG_DV1 3
+#define I830_DESTREG_SENABLE 4
+#define I830_DESTREG_SR0 5
+#define I830_DESTREG_SR1 6
+#define I830_DESTREG_SR2 7
+#define I830_DESTREG_DR0 8
+#define I830_DESTREG_DR1 9
+#define I830_DESTREG_DR2 10
+#define I830_DESTREG_DR3 11
+#define I830_DESTREG_DR4 12
+#define I830_DEST_SETUP_SIZE 13
+
+/* Context state
+ */
+#define I830_CTXREG_STATE1 0
+#define I830_CTXREG_STATE2 1
+#define I830_CTXREG_STATE3 2
+#define I830_CTXREG_STATE4 3
+#define I830_CTXREG_STATE5 4
+#define I830_CTXREG_IALPHAB 5
+#define I830_CTXREG_STENCILTST 6
+#define I830_CTXREG_ENABLES_1 7
+#define I830_CTXREG_ENABLES_2 8
+#define I830_CTXREG_AA 9
+#define I830_CTXREG_FOGCOLOR 10
+#define I830_CTXREG_BLENDCOLR0 11
+#define I830_CTXREG_BLENDCOLR 12 /* Dword 1 of 2 dword command */
+#define I830_CTXREG_VF 13
+#define I830_CTXREG_VF2 14
+#define I830_CTXREG_MCSB0 15
+#define I830_CTXREG_MCSB1 16
+#define I830_CTX_SETUP_SIZE 17
+
+/* 1.3: Stipple state
+ */
+#define I830_STPREG_ST0 0
+#define I830_STPREG_ST1 1
+#define I830_STP_SETUP_SIZE 2
+
+/* Texture state (per tex unit)
+ */
+
+#define I830_TEXREG_MI0 0 /* GFX_OP_MAP_INFO (6 dwords) */
+#define I830_TEXREG_MI1 1
+#define I830_TEXREG_MI2 2
+#define I830_TEXREG_MI3 3
+#define I830_TEXREG_MI4 4
+#define I830_TEXREG_MI5 5
+#define I830_TEXREG_MF 6 /* GFX_OP_MAP_FILTER */
+#define I830_TEXREG_MLC 7 /* GFX_OP_MAP_LOD_CTL */
+#define I830_TEXREG_MLL 8 /* GFX_OP_MAP_LOD_LIMITS */
+#define I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS */
+#define I830_TEX_SETUP_SIZE 10
+
+#define I830_TEXREG_TM0LI 0 /* load immediate 2 texture map n */
+#define I830_TEXREG_TM0S0 1
+#define I830_TEXREG_TM0S1 2
+#define I830_TEXREG_TM0S2 3
+#define I830_TEXREG_TM0S3 4
+#define I830_TEXREG_TM0S4 5
+#define I830_TEXREG_NOP0 6 /* noop */
+#define I830_TEXREG_NOP1 7 /* noop */
+#define I830_TEXREG_NOP2 8 /* noop */
+#define __I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS -- shared */
+#define __I830_TEX_SETUP_SIZE 10
+
+#define I830_FRONT 0x1
+#define I830_BACK 0x2
+#define I830_DEPTH 0x4
+
+#endif /* _I830_DEFINES_ */
+
+typedef struct _drm_i830_init {
+ enum {
+ I830_INIT_DMA = 0x01,
+ I830_CLEANUP_DMA = 0x02
+ } func;
+ unsigned int mmio_offset;
+ unsigned int buffers_offset;
+ int sarea_priv_offset;
+ unsigned int ring_start;
+ unsigned int ring_end;
+ unsigned int ring_size;
+ unsigned int front_offset;
+ unsigned int back_offset;
+ unsigned int depth_offset;
+ unsigned int w;
+ unsigned int h;
+ unsigned int pitch;
+ unsigned int pitch_bits;
+ unsigned int back_pitch;
+ unsigned int depth_pitch;
+ unsigned int cpp;
+} drm_i830_init_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_i830_tex_region {
+ unsigned char next, prev; /* indices to form a circular LRU */
+ unsigned char in_use; /* owned by a client, or free? */
+ int age; /* tracked by clients to update local LRU's */
+} drm_i830_tex_region_t;
+
+typedef struct _drm_i830_sarea {
+ unsigned int ContextState[I830_CTX_SETUP_SIZE];
+ unsigned int BufferState[I830_DEST_SETUP_SIZE];
+ unsigned int TexState[I830_TEXTURE_COUNT][I830_TEX_SETUP_SIZE];
+ unsigned int TexBlendState[I830_TEXBLEND_COUNT][I830_TEXBLEND_SIZE];
+ unsigned int TexBlendStateWordsUsed[I830_TEXBLEND_COUNT];
+ unsigned int Palette[2][256];
+ unsigned int dirty;
+
+ unsigned int nbox;
+ struct drm_clip_rect boxes[I830_NR_SAREA_CLIPRECTS];
+
+ /* Maintain an LRU of contiguous regions of texture space. If
+ * you think you own a region of texture memory, and it has an
+ * age different to the one you set, then you are mistaken and
+ * it has been stolen by another client. If global texAge
+ * hasn't changed, there is no need to walk the list.
+ *
+ * These regions can be used as a proxy for the fine-grained
+ * texture information of other clients - by maintaining them
+ * in the same lru which is used to age their own textures,
+ * clients have an approximate lru for the whole of global
+ * texture space, and can make informed decisions as to which
+ * areas to kick out. There is no need to choose whether to
+ * kick out your own texture or someone else's - simply eject
+ * them all in LRU order.
+ */
+
+ drm_i830_tex_region_t texList[I830_NR_TEX_REGIONS + 1];
+ /* Last elt is sentinal */
+ int texAge; /* last time texture was uploaded */
+ int last_enqueue; /* last time a buffer was enqueued */
+ int last_dispatch; /* age of the most recently dispatched buffer */
+ int last_quiescent; /* */
+ int ctxOwner; /* last context to upload state */
+
+ int vertex_prim;
+
+ int pf_enabled; /* is pageflipping allowed? */
+ int pf_active;
+ int pf_current_page; /* which buffer is being displayed? */
+
+ int perf_boxes; /* performance boxes to be displayed */
+
+ /* Here's the state for texunits 2,3:
+ */
+ unsigned int TexState2[I830_TEX_SETUP_SIZE];
+ unsigned int TexBlendState2[I830_TEXBLEND_SIZE];
+ unsigned int TexBlendStateWordsUsed2;
+
+ unsigned int TexState3[I830_TEX_SETUP_SIZE];
+ unsigned int TexBlendState3[I830_TEXBLEND_SIZE];
+ unsigned int TexBlendStateWordsUsed3;
+
+ unsigned int StippleState[I830_STP_SETUP_SIZE];
+} drm_i830_sarea_t;
+
+/* Flags for perf_boxes
+ */
+#define I830_BOX_RING_EMPTY 0x1 /* populated by kernel */
+#define I830_BOX_FLIP 0x2 /* populated by kernel */
+#define I830_BOX_WAIT 0x4 /* populated by kernel & client */
+#define I830_BOX_TEXTURE_LOAD 0x8 /* populated by kernel */
+#define I830_BOX_LOST_CONTEXT 0x10 /* populated by client */
+
+/* I830 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I830_INIT 0x00
+#define DRM_I830_VERTEX 0x01
+#define DRM_I830_CLEAR 0x02
+#define DRM_I830_FLUSH 0x03
+#define DRM_I830_GETAGE 0x04
+#define DRM_I830_GETBUF 0x05
+#define DRM_I830_SWAP 0x06
+#define DRM_I830_COPY 0x07
+#define DRM_I830_DOCOPY 0x08
+#define DRM_I830_FLIP 0x09
+#define DRM_I830_IRQ_EMIT 0x0a
+#define DRM_I830_IRQ_WAIT 0x0b
+#define DRM_I830_GETPARAM 0x0c
+#define DRM_I830_SETPARAM 0x0d
+
+#define DRM_IOCTL_I830_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_INIT, drm_i830_init_t)
+#define DRM_IOCTL_I830_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_VERTEX, drm_i830_vertex_t)
+#define DRM_IOCTL_I830_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_CLEAR, drm_i830_clear_t)
+#define DRM_IOCTL_I830_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLUSH)
+#define DRM_IOCTL_I830_GETAGE DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_GETAGE)
+#define DRM_IOCTL_I830_GETBUF DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETBUF, drm_i830_dma_t)
+#define DRM_IOCTL_I830_SWAP DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_SWAP)
+#define DRM_IOCTL_I830_COPY DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_COPY, drm_i830_copy_t)
+#define DRM_IOCTL_I830_DOCOPY DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_DOCOPY)
+#define DRM_IOCTL_I830_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLIP)
+#define DRM_IOCTL_I830_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_EMIT, drm_i830_irq_emit_t)
+#define DRM_IOCTL_I830_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_WAIT, drm_i830_irq_wait_t)
+#define DRM_IOCTL_I830_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETPARAM, drm_i830_getparam_t)
+#define DRM_IOCTL_I830_SETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_SETPARAM, drm_i830_setparam_t)
+
+typedef struct _drm_i830_clear {
+ int clear_color;
+ int clear_depth;
+ int flags;
+ unsigned int clear_colormask;
+ unsigned int clear_depthmask;
+} drm_i830_clear_t;
+
+/* These may be placeholders if we have more cliprects than
+ * I830_NR_SAREA_CLIPRECTS. In that case, the client sets discard to
+ * false, indicating that the buffer will be dispatched again with a
+ * new set of cliprects.
+ */
+typedef struct _drm_i830_vertex {
+ int idx; /* buffer index */
+ int used; /* nr bytes in use */
+ int discard; /* client is finished with the buffer? */
+} drm_i830_vertex_t;
+
+typedef struct _drm_i830_copy_t {
+ int idx; /* buffer index */
+ int used; /* nr bytes in use */
+ void __user *address; /* Address to copy from */
+} drm_i830_copy_t;
+
+typedef struct drm_i830_dma {
+ void __user *virtual;
+ int request_idx;
+ int request_size;
+ int granted;
+} drm_i830_dma_t;
+
+/* 1.3: Userspace can request & wait on irq's:
+ */
+typedef struct drm_i830_irq_emit {
+ int __user *irq_seq;
+} drm_i830_irq_emit_t;
+
+typedef struct drm_i830_irq_wait {
+ int irq_seq;
+} drm_i830_irq_wait_t;
+
+/* 1.3: New ioctl to query kernel params:
+ */
+#define I830_PARAM_IRQ_ACTIVE 1
+
+typedef struct drm_i830_getparam {
+ int param;
+ int __user *value;
+} drm_i830_getparam_t;
+
+/* 1.3: New ioctl to set kernel params:
+ */
+#define I830_SETPARAM_USE_MI_BATCHBUFFER_START 1
+
+typedef struct drm_i830_setparam {
+ int param;
+ int value;
+} drm_i830_setparam_t;
+
+#endif /* _I830_DRM_H_ */
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
new file mode 100644
index 00000000000..05c66cf03a9
--- /dev/null
+++ b/include/drm/i915_drm.h
@@ -0,0 +1,270 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _I915_DRM_H_
+#define _I915_DRM_H_
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+#include "drm.h"
+
+/* Each region is a minimum of 16k, and there are at most 255 of them.
+ */
+#define I915_NR_TEX_REGIONS 255 /* table size 2k - maximum due to use
+ * of chars for next/prev indices */
+#define I915_LOG_MIN_TEX_REGION_SIZE 14
+
+typedef struct _drm_i915_init {
+ enum {
+ I915_INIT_DMA = 0x01,
+ I915_CLEANUP_DMA = 0x02,
+ I915_RESUME_DMA = 0x03
+ } func;
+ unsigned int mmio_offset;
+ int sarea_priv_offset;
+ unsigned int ring_start;
+ unsigned int ring_end;
+ unsigned int ring_size;
+ unsigned int front_offset;
+ unsigned int back_offset;
+ unsigned int depth_offset;
+ unsigned int w;
+ unsigned int h;
+ unsigned int pitch;
+ unsigned int pitch_bits;
+ unsigned int back_pitch;
+ unsigned int depth_pitch;
+ unsigned int cpp;
+ unsigned int chipset;
+} drm_i915_init_t;
+
+typedef struct _drm_i915_sarea {
+ struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];
+ int last_upload; /* last time texture was uploaded */
+ int last_enqueue; /* last time a buffer was enqueued */
+ int last_dispatch; /* age of the most recently dispatched buffer */
+ int ctxOwner; /* last context to upload state */
+ int texAge;
+ int pf_enabled; /* is pageflipping allowed? */
+ int pf_active;
+ int pf_current_page; /* which buffer is being displayed? */
+ int perf_boxes; /* performance boxes to be displayed */
+ int width, height; /* screen size in pixels */
+
+ drm_handle_t front_handle;
+ int front_offset;
+ int front_size;
+
+ drm_handle_t back_handle;
+ int back_offset;
+ int back_size;
+
+ drm_handle_t depth_handle;
+ int depth_offset;
+ int depth_size;
+
+ drm_handle_t tex_handle;
+ int tex_offset;
+ int tex_size;
+ int log_tex_granularity;
+ int pitch;
+ int rotation; /* 0, 90, 180 or 270 */
+ int rotated_offset;
+ int rotated_size;
+ int rotated_pitch;
+ int virtualX, virtualY;
+
+ unsigned int front_tiled;
+ unsigned int back_tiled;
+ unsigned int depth_tiled;
+ unsigned int rotated_tiled;
+ unsigned int rotated2_tiled;
+
+ int pipeA_x;
+ int pipeA_y;
+ int pipeA_w;
+ int pipeA_h;
+ int pipeB_x;
+ int pipeB_y;
+ int pipeB_w;
+ int pipeB_h;
+} drm_i915_sarea_t;
+
+/* Flags for perf_boxes
+ */
+#define I915_BOX_RING_EMPTY 0x1
+#define I915_BOX_FLIP 0x2
+#define I915_BOX_WAIT 0x4
+#define I915_BOX_TEXTURE_LOAD 0x8
+#define I915_BOX_LOST_CONTEXT 0x10
+
+/* I915 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I915_INIT 0x00
+#define DRM_I915_FLUSH 0x01
+#define DRM_I915_FLIP 0x02
+#define DRM_I915_BATCHBUFFER 0x03
+#define DRM_I915_IRQ_EMIT 0x04
+#define DRM_I915_IRQ_WAIT 0x05
+#define DRM_I915_GETPARAM 0x06
+#define DRM_I915_SETPARAM 0x07
+#define DRM_I915_ALLOC 0x08
+#define DRM_I915_FREE 0x09
+#define DRM_I915_INIT_HEAP 0x0a
+#define DRM_I915_CMDBUFFER 0x0b
+#define DRM_I915_DESTROY_HEAP 0x0c
+#define DRM_I915_SET_VBLANK_PIPE 0x0d
+#define DRM_I915_GET_VBLANK_PIPE 0x0e
+#define DRM_I915_VBLANK_SWAP 0x0f
+#define DRM_I915_HWS_ADDR 0x11
+
+#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
+#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
+#define DRM_IOCTL_I915_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
+#define DRM_IOCTL_I915_BATCHBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
+#define DRM_IOCTL_I915_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
+#define DRM_IOCTL_I915_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
+#define DRM_IOCTL_I915_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t)
+#define DRM_IOCTL_I915_SETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t)
+#define DRM_IOCTL_I915_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t)
+#define DRM_IOCTL_I915_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
+#define DRM_IOCTL_I915_INIT_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
+#define DRM_IOCTL_I915_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
+#define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
+
+/* Allow drivers to submit batchbuffers directly to hardware, relying
+ * on the security mechanisms provided by hardware.
+ */
+typedef struct _drm_i915_batchbuffer {
+ int start; /* agp offset */
+ int used; /* nr bytes in use */
+ int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */
+ int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */
+ int num_cliprects; /* mulitpass with multiple cliprects? */
+ struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */
+} drm_i915_batchbuffer_t;
+
+/* As above, but pass a pointer to userspace buffer which can be
+ * validated by the kernel prior to sending to hardware.
+ */
+typedef struct _drm_i915_cmdbuffer {
+ char __user *buf; /* pointer to userspace command buffer */
+ int sz; /* nr bytes in buf */
+ int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */
+ int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */
+ int num_cliprects; /* mulitpass with multiple cliprects? */
+ struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */
+} drm_i915_cmdbuffer_t;
+
+/* Userspace can request & wait on irq's:
+ */
+typedef struct drm_i915_irq_emit {
+ int __user *irq_seq;
+} drm_i915_irq_emit_t;
+
+typedef struct drm_i915_irq_wait {
+ int irq_seq;
+} drm_i915_irq_wait_t;
+
+/* Ioctl to query kernel params:
+ */
+#define I915_PARAM_IRQ_ACTIVE 1
+#define I915_PARAM_ALLOW_BATCHBUFFER 2
+#define I915_PARAM_LAST_DISPATCH 3
+
+typedef struct drm_i915_getparam {
+ int param;
+ int __user *value;
+} drm_i915_getparam_t;
+
+/* Ioctl to set kernel params:
+ */
+#define I915_SETPARAM_USE_MI_BATCHBUFFER_START 1
+#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY 2
+#define I915_SETPARAM_ALLOW_BATCHBUFFER 3
+
+typedef struct drm_i915_setparam {
+ int param;
+ int value;
+} drm_i915_setparam_t;
+
+/* A memory manager for regions of shared memory:
+ */
+#define I915_MEM_REGION_AGP 1
+
+typedef struct drm_i915_mem_alloc {
+ int region;
+ int alignment;
+ int size;
+ int __user *region_offset; /* offset from start of fb or agp */
+} drm_i915_mem_alloc_t;
+
+typedef struct drm_i915_mem_free {
+ int region;
+ int region_offset;
+} drm_i915_mem_free_t;
+
+typedef struct drm_i915_mem_init_heap {
+ int region;
+ int size;
+ int start;
+} drm_i915_mem_init_heap_t;
+
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+ int region;
+} drm_i915_mem_destroy_heap_t;
+
+/* Allow X server to configure which pipes to monitor for vblank signals
+ */
+#define DRM_I915_VBLANK_PIPE_A 1
+#define DRM_I915_VBLANK_PIPE_B 2
+
+typedef struct drm_i915_vblank_pipe {
+ int pipe;
+} drm_i915_vblank_pipe_t;
+
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+ drm_drawable_t drawable;
+ enum drm_vblank_seq_type seqtype;
+ unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
+typedef struct drm_i915_hws_addr {
+ uint64_t addr;
+} drm_i915_hws_addr_t;
+
+#endif /* _I915_DRM_H_ */
diff --git a/include/drm/mga_drm.h b/include/drm/mga_drm.h
new file mode 100644
index 00000000000..944b50a5ff2
--- /dev/null
+++ b/include/drm/mga_drm.h
@@ -0,0 +1,417 @@
+/* mga_drm.h -- Public header for the Matrox g200/g400 driver -*- linux-c -*-
+ * Created: Tue Jan 25 01:50:01 1999 by jhartmann@precisioninsight.com
+ *
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Jeff Hartmann <jhartmann@valinux.com>
+ * Keith Whitwell <keith@tungstengraphics.com>
+ *
+ * Rewritten by:
+ * Gareth Hughes <gareth@valinux.com>
+ */
+
+#ifndef __MGA_DRM_H__
+#define __MGA_DRM_H__
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (mga_sarea.h)
+ */
+
+#ifndef __MGA_SAREA_DEFINES__
+#define __MGA_SAREA_DEFINES__
+
+/* WARP pipe flags
+ */
+#define MGA_F 0x1 /* fog */
+#define MGA_A 0x2 /* alpha */
+#define MGA_S 0x4 /* specular */
+#define MGA_T2 0x8 /* multitexture */
+
+#define MGA_WARP_TGZ 0
+#define MGA_WARP_TGZF (MGA_F)
+#define MGA_WARP_TGZA (MGA_A)
+#define MGA_WARP_TGZAF (MGA_F|MGA_A)
+#define MGA_WARP_TGZS (MGA_S)
+#define MGA_WARP_TGZSF (MGA_S|MGA_F)
+#define MGA_WARP_TGZSA (MGA_S|MGA_A)
+#define MGA_WARP_TGZSAF (MGA_S|MGA_F|MGA_A)
+#define MGA_WARP_T2GZ (MGA_T2)
+#define MGA_WARP_T2GZF (MGA_T2|MGA_F)
+#define MGA_WARP_T2GZA (MGA_T2|MGA_A)
+#define MGA_WARP_T2GZAF (MGA_T2|MGA_A|MGA_F)
+#define MGA_WARP_T2GZS (MGA_T2|MGA_S)
+#define MGA_WARP_T2GZSF (MGA_T2|MGA_S|MGA_F)
+#define MGA_WARP_T2GZSA (MGA_T2|MGA_S|MGA_A)
+#define MGA_WARP_T2GZSAF (MGA_T2|MGA_S|MGA_F|MGA_A)
+
+#define MGA_MAX_G200_PIPES 8 /* no multitex */
+#define MGA_MAX_G400_PIPES 16
+#define MGA_MAX_WARP_PIPES MGA_MAX_G400_PIPES
+#define MGA_WARP_UCODE_SIZE 32768 /* in bytes */
+
+#define MGA_CARD_TYPE_G200 1
+#define MGA_CARD_TYPE_G400 2
+#define MGA_CARD_TYPE_G450 3 /* not currently used */
+#define MGA_CARD_TYPE_G550 4
+
+#define MGA_FRONT 0x1
+#define MGA_BACK 0x2
+#define MGA_DEPTH 0x4
+
+/* What needs to be changed for the current vertex dma buffer?
+ */
+#define MGA_UPLOAD_CONTEXT 0x1
+#define MGA_UPLOAD_TEX0 0x2
+#define MGA_UPLOAD_TEX1 0x4
+#define MGA_UPLOAD_PIPE 0x8
+#define MGA_UPLOAD_TEX0IMAGE 0x10 /* handled client-side */
+#define MGA_UPLOAD_TEX1IMAGE 0x20 /* handled client-side */
+#define MGA_UPLOAD_2D 0x40
+#define MGA_WAIT_AGE 0x80 /* handled client-side */
+#define MGA_UPLOAD_CLIPRECTS 0x100 /* handled client-side */
+#if 0
+#define MGA_DMA_FLUSH 0x200 /* set when someone gets the lock
+ quiescent */
+#endif
+
+/* 32 buffers of 64k each, total 2 meg.
+ */
+#define MGA_BUFFER_SIZE (1 << 16)
+#define MGA_NUM_BUFFERS 128
+
+/* Keep these small for testing.
+ */
+#define MGA_NR_SAREA_CLIPRECTS 8
+
+/* 2 heaps (1 for card, 1 for agp), each divided into upto 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define MGA_CARD_HEAP 0
+#define MGA_AGP_HEAP 1
+#define MGA_NR_TEX_HEAPS 2
+#define MGA_NR_TEX_REGIONS 16
+#define MGA_LOG_MIN_TEX_REGION_SIZE 16
+
+#define DRM_MGA_IDLE_RETRY 2048
+
+#endif /* __MGA_SAREA_DEFINES__ */
+
+/* Setup registers for 3D context
+ */
+typedef struct {
+ unsigned int dstorg;
+ unsigned int maccess;
+ unsigned int plnwt;
+ unsigned int dwgctl;
+ unsigned int alphactrl;
+ unsigned int fogcolor;
+ unsigned int wflag;
+ unsigned int tdualstage0;
+ unsigned int tdualstage1;
+ unsigned int fcol;
+ unsigned int stencil;
+ unsigned int stencilctl;
+} drm_mga_context_regs_t;
+
+/* Setup registers for 2D, X server
+ */
+typedef struct {
+ unsigned int pitch;
+} drm_mga_server_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+ unsigned int texctl;
+ unsigned int texctl2;
+ unsigned int texfilter;
+ unsigned int texbordercol;
+ unsigned int texorg;
+ unsigned int texwidth;
+ unsigned int texheight;
+ unsigned int texorg1;
+ unsigned int texorg2;
+ unsigned int texorg3;
+ unsigned int texorg4;
+} drm_mga_texture_regs_t;
+
+/* General aging mechanism
+ */
+typedef struct {
+ unsigned int head; /* Position of head pointer */
+ unsigned int wrap; /* Primary DMA wrap count */
+} drm_mga_age_t;
+
+typedef struct _drm_mga_sarea {
+ /* The channel for communication of state information to the kernel
+ * on firing a vertex dma buffer.
+ */
+ drm_mga_context_regs_t context_state;
+ drm_mga_server_regs_t server_state;
+ drm_mga_texture_regs_t tex_state[2];
+ unsigned int warp_pipe;
+ unsigned int dirty;
+ unsigned int vertsize;
+
+ /* The current cliprects, or a subset thereof.
+ */
+ struct drm_clip_rect boxes[MGA_NR_SAREA_CLIPRECTS];
+ unsigned int nbox;
+
+ /* Information about the most recently used 3d drawable. The
+ * client fills in the req_* fields, the server fills in the
+ * exported_ fields and puts the cliprects into boxes, above.
+ *
+ * The client clears the exported_drawable field before
+ * clobbering the boxes data.
+ */
+ unsigned int req_drawable; /* the X drawable id */
+ unsigned int req_draw_buffer; /* MGA_FRONT or MGA_BACK */
+
+ unsigned int exported_drawable;
+ unsigned int exported_index;
+ unsigned int exported_stamp;
+ unsigned int exported_buffers;
+ unsigned int exported_nfront;
+ unsigned int exported_nback;
+ int exported_back_x, exported_front_x, exported_w;
+ int exported_back_y, exported_front_y, exported_h;
+ struct drm_clip_rect exported_boxes[MGA_NR_SAREA_CLIPRECTS];
+
+ /* Counters for aging textures and for client-side throttling.
+ */
+ unsigned int status[4];
+ unsigned int last_wrap;
+
+ drm_mga_age_t last_frame;
+ unsigned int last_enqueue; /* last time a buffer was enqueued */
+ unsigned int last_dispatch; /* age of the most recently dispatched buffer */
+ unsigned int last_quiescent; /* */
+
+ /* LRU lists for texture memory in agp space and on the card.
+ */
+ struct drm_tex_region texList[MGA_NR_TEX_HEAPS][MGA_NR_TEX_REGIONS + 1];
+ unsigned int texAge[MGA_NR_TEX_HEAPS];
+
+ /* Mechanism to validate card state.
+ */
+ int ctxOwner;
+} drm_mga_sarea_t;
+
+/* MGA specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_MGA_INIT 0x00
+#define DRM_MGA_FLUSH 0x01
+#define DRM_MGA_RESET 0x02
+#define DRM_MGA_SWAP 0x03
+#define DRM_MGA_CLEAR 0x04
+#define DRM_MGA_VERTEX 0x05
+#define DRM_MGA_INDICES 0x06
+#define DRM_MGA_ILOAD 0x07
+#define DRM_MGA_BLIT 0x08
+#define DRM_MGA_GETPARAM 0x09
+
+/* 3.2:
+ * ioctls for operating on fences.
+ */
+#define DRM_MGA_SET_FENCE 0x0a
+#define DRM_MGA_WAIT_FENCE 0x0b
+#define DRM_MGA_DMA_BOOTSTRAP 0x0c
+
+#define DRM_IOCTL_MGA_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t)
+#define DRM_IOCTL_MGA_FLUSH DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, drm_lock_t)
+#define DRM_IOCTL_MGA_RESET DRM_IO( DRM_COMMAND_BASE + DRM_MGA_RESET)
+#define DRM_IOCTL_MGA_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_MGA_SWAP)
+#define DRM_IOCTL_MGA_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_CLEAR, drm_mga_clear_t)
+#define DRM_IOCTL_MGA_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_VERTEX, drm_mga_vertex_t)
+#define DRM_IOCTL_MGA_INDICES DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INDICES, drm_mga_indices_t)
+#define DRM_IOCTL_MGA_ILOAD DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t)
+#define DRM_IOCTL_MGA_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t)
+#define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t)
+#define DRM_IOCTL_MGA_SET_FENCE DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_WAIT_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t)
+
+typedef struct _drm_mga_warp_index {
+ int installed;
+ unsigned long phys_addr;
+ int size;
+} drm_mga_warp_index_t;
+
+typedef struct drm_mga_init {
+ enum {
+ MGA_INIT_DMA = 0x01,
+ MGA_CLEANUP_DMA = 0x02
+ } func;
+
+ unsigned long sarea_priv_offset;
+
+ int chipset;
+ int sgram;
+
+ unsigned int maccess;
+
+ unsigned int fb_cpp;
+ unsigned int front_offset, front_pitch;
+ unsigned int back_offset, back_pitch;
+
+ unsigned int depth_cpp;
+ unsigned int depth_offset, depth_pitch;
+
+ unsigned int texture_offset[MGA_NR_TEX_HEAPS];
+ unsigned int texture_size[MGA_NR_TEX_HEAPS];
+
+ unsigned long fb_offset;
+ unsigned long mmio_offset;
+ unsigned long status_offset;
+ unsigned long warp_offset;
+ unsigned long primary_offset;
+ unsigned long buffers_offset;
+} drm_mga_init_t;
+
+typedef struct drm_mga_dma_bootstrap {
+ /**
+ * \name AGP texture region
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will
+ * be filled in with the actual AGP texture settings.
+ *
+ * \warning
+ * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode
+ * is zero, it means that PCI memory (most likely through the use of
+ * an IOMMU) is being used for "AGP" textures.
+ */
+ /*@{ */
+ unsigned long texture_handle; /**< Handle used to map AGP textures. */
+ uint32_t texture_size; /**< Size of the AGP texture region. */
+ /*@} */
+
+ /**
+ * Requested size of the primary DMA region.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual AGP mode. If AGP was not available
+ */
+ uint32_t primary_size;
+
+ /**
+ * Requested number of secondary DMA buffers.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual number of secondary DMA buffers
+ * allocated. Particularly when PCI DMA is used, this may be
+ * (subtantially) less than the number requested.
+ */
+ uint32_t secondary_bin_count;
+
+ /**
+ * Requested size of each secondary DMA buffer.
+ *
+ * While the kernel \b is free to reduce
+ * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed
+ * to reduce dma_mga_dma_bootstrap::secondary_bin_size.
+ */
+ uint32_t secondary_bin_size;
+
+ /**
+ * Bit-wise mask of AGPSTAT2_* values. Currently only \c AGPSTAT2_1X,
+ * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported. If this value is
+ * zero, it means that PCI DMA should be used, even if AGP is
+ * possible.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual AGP mode. If AGP was not available
+ * (i.e., PCI DMA was used), this value will be zero.
+ */
+ uint32_t agp_mode;
+
+ /**
+ * Desired AGP GART size, measured in megabytes.
+ */
+ uint8_t agp_size;
+} drm_mga_dma_bootstrap_t;
+
+typedef struct drm_mga_clear {
+ unsigned int flags;
+ unsigned int clear_color;
+ unsigned int clear_depth;
+ unsigned int color_mask;
+ unsigned int depth_mask;
+} drm_mga_clear_t;
+
+typedef struct drm_mga_vertex {
+ int idx; /* buffer to queue */
+ int used; /* bytes in use */
+ int discard; /* client finished with buffer? */
+} drm_mga_vertex_t;
+
+typedef struct drm_mga_indices {
+ int idx; /* buffer to queue */
+ unsigned int start;
+ unsigned int end;
+ int discard; /* client finished with buffer? */
+} drm_mga_indices_t;
+
+typedef struct drm_mga_iload {
+ int idx;
+ unsigned int dstorg;
+ unsigned int length;
+} drm_mga_iload_t;
+
+typedef struct _drm_mga_blit {
+ unsigned int planemask;
+ unsigned int srcorg;
+ unsigned int dstorg;
+ int src_pitch, dst_pitch;
+ int delta_sx, delta_sy;
+ int delta_dx, delta_dy;
+ int height, ydir; /* flip image vertically */
+ int source_pitch, dest_pitch;
+} drm_mga_blit_t;
+
+/* 3.1: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define MGA_PARAM_IRQ_NR 1
+
+/* 3.2: Query the actual card type. The DDX only distinguishes between
+ * G200 chips and non-G200 chips, which it calls G400. It turns out that
+ * there are some very sublte differences between the G4x0 chips and the G550
+ * chips. Using this parameter query, a client-side driver can detect the
+ * difference between a G4x0 and a G550.
+ */
+#define MGA_PARAM_CARD_TYPE 2
+
+typedef struct drm_mga_getparam {
+ int param;
+ void __user *value;
+} drm_mga_getparam_t;
+
+#endif
diff --git a/include/drm/r128_drm.h b/include/drm/r128_drm.h
new file mode 100644
index 00000000000..8d8878b55f5
--- /dev/null
+++ b/include/drm/r128_drm.h
@@ -0,0 +1,326 @@
+/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*-
+ * Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com
+ */
+/*
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Gareth Hughes <gareth@valinux.com>
+ * Kevin E. Martin <martin@valinux.com>
+ */
+
+#ifndef __R128_DRM_H__
+#define __R128_DRM_H__
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (r128_sarea.h)
+ */
+#ifndef __R128_SAREA_DEFINES__
+#define __R128_SAREA_DEFINES__
+
+/* What needs to be changed for the current vertex buffer?
+ */
+#define R128_UPLOAD_CONTEXT 0x001
+#define R128_UPLOAD_SETUP 0x002
+#define R128_UPLOAD_TEX0 0x004
+#define R128_UPLOAD_TEX1 0x008
+#define R128_UPLOAD_TEX0IMAGES 0x010
+#define R128_UPLOAD_TEX1IMAGES 0x020
+#define R128_UPLOAD_CORE 0x040
+#define R128_UPLOAD_MASKS 0x080
+#define R128_UPLOAD_WINDOW 0x100
+#define R128_UPLOAD_CLIPRECTS 0x200 /* handled client-side */
+#define R128_REQUIRE_QUIESCENCE 0x400
+#define R128_UPLOAD_ALL 0x7ff
+
+#define R128_FRONT 0x1
+#define R128_BACK 0x2
+#define R128_DEPTH 0x4
+
+/* Primitive types
+ */
+#define R128_POINTS 0x1
+#define R128_LINES 0x2
+#define R128_LINE_STRIP 0x3
+#define R128_TRIANGLES 0x4
+#define R128_TRIANGLE_FAN 0x5
+#define R128_TRIANGLE_STRIP 0x6
+
+/* Vertex/indirect buffer size
+ */
+#define R128_BUFFER_SIZE 16384
+
+/* Byte offsets for indirect buffer data
+ */
+#define R128_INDEX_PRIM_OFFSET 20
+#define R128_HOSTDATA_BLIT_OFFSET 32
+
+/* Keep these small for testing.
+ */
+#define R128_NR_SAREA_CLIPRECTS 12
+
+/* There are 2 heaps (local/AGP). Each region within a heap is a
+ * minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define R128_LOCAL_TEX_HEAP 0
+#define R128_AGP_TEX_HEAP 1
+#define R128_NR_TEX_HEAPS 2
+#define R128_NR_TEX_REGIONS 64
+#define R128_LOG_TEX_GRANULARITY 16
+
+#define R128_NR_CONTEXT_REGS 12
+
+#define R128_MAX_TEXTURE_LEVELS 11
+#define R128_MAX_TEXTURE_UNITS 2
+
+#endif /* __R128_SAREA_DEFINES__ */
+
+typedef struct {
+ /* Context state - can be written in one large chunk */
+ unsigned int dst_pitch_offset_c;
+ unsigned int dp_gui_master_cntl_c;
+ unsigned int sc_top_left_c;
+ unsigned int sc_bottom_right_c;
+ unsigned int z_offset_c;
+ unsigned int z_pitch_c;
+ unsigned int z_sten_cntl_c;
+ unsigned int tex_cntl_c;
+ unsigned int misc_3d_state_cntl_reg;
+ unsigned int texture_clr_cmp_clr_c;
+ unsigned int texture_clr_cmp_msk_c;
+ unsigned int fog_color_c;
+
+ /* Texture state */
+ unsigned int tex_size_pitch_c;
+ unsigned int constant_color_c;
+
+ /* Setup state */
+ unsigned int pm4_vc_fpu_setup;
+ unsigned int setup_cntl;
+
+ /* Mask state */
+ unsigned int dp_write_mask;
+ unsigned int sten_ref_mask_c;
+ unsigned int plane_3d_mask_c;
+
+ /* Window state */
+ unsigned int window_xy_offset;
+
+ /* Core state */
+ unsigned int scale_3d_cntl;
+} drm_r128_context_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+ unsigned int tex_cntl;
+ unsigned int tex_combine_cntl;
+ unsigned int tex_size_pitch;
+ unsigned int tex_offset[R128_MAX_TEXTURE_LEVELS];
+ unsigned int tex_border_color;
+} drm_r128_texture_regs_t;
+
+typedef struct drm_r128_sarea {
+ /* The channel for communication of state information to the kernel
+ * on firing a vertex buffer.
+ */
+ drm_r128_context_regs_t context_state;
+ drm_r128_texture_regs_t tex_state[R128_MAX_TEXTURE_UNITS];
+ unsigned int dirty;
+ unsigned int vertsize;
+ unsigned int vc_format;
+
+ /* The current cliprects, or a subset thereof.
+ */
+ struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS];
+ unsigned int nbox;
+
+ /* Counters for client-side throttling of rendering clients.
+ */
+ unsigned int last_frame;
+ unsigned int last_dispatch;
+
+ struct drm_tex_region tex_list[R128_NR_TEX_HEAPS][R128_NR_TEX_REGIONS + 1];
+ unsigned int tex_age[R128_NR_TEX_HEAPS];
+ int ctx_owner;
+ int pfAllowPageFlip; /* number of 3d windows (0,1,2 or more) */
+ int pfCurrentPage; /* which buffer is being displayed? */
+} drm_r128_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmR128.h)
+ */
+
+/* Rage 128 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_R128_INIT 0x00
+#define DRM_R128_CCE_START 0x01
+#define DRM_R128_CCE_STOP 0x02
+#define DRM_R128_CCE_RESET 0x03
+#define DRM_R128_CCE_IDLE 0x04
+/* 0x05 not used */
+#define DRM_R128_RESET 0x06
+#define DRM_R128_SWAP 0x07
+#define DRM_R128_CLEAR 0x08
+#define DRM_R128_VERTEX 0x09
+#define DRM_R128_INDICES 0x0a
+#define DRM_R128_BLIT 0x0b
+#define DRM_R128_DEPTH 0x0c
+#define DRM_R128_STIPPLE 0x0d
+/* 0x0e not used */
+#define DRM_R128_INDIRECT 0x0f
+#define DRM_R128_FULLSCREEN 0x10
+#define DRM_R128_CLEAR2 0x11
+#define DRM_R128_GETPARAM 0x12
+#define DRM_R128_FLIP 0x13
+
+#define DRM_IOCTL_R128_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INIT, drm_r128_init_t)
+#define DRM_IOCTL_R128_CCE_START DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_START)
+#define DRM_IOCTL_R128_CCE_STOP DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CCE_STOP, drm_r128_cce_stop_t)
+#define DRM_IOCTL_R128_CCE_RESET DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_RESET)
+#define DRM_IOCTL_R128_CCE_IDLE DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_IDLE)
+/* 0x05 not used */
+#define DRM_IOCTL_R128_RESET DRM_IO( DRM_COMMAND_BASE + DRM_R128_RESET)
+#define DRM_IOCTL_R128_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_R128_SWAP)
+#define DRM_IOCTL_R128_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR, drm_r128_clear_t)
+#define DRM_IOCTL_R128_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_R128_VERTEX, drm_r128_vertex_t)
+#define DRM_IOCTL_R128_INDICES DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INDICES, drm_r128_indices_t)
+#define DRM_IOCTL_R128_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_R128_BLIT, drm_r128_blit_t)
+#define DRM_IOCTL_R128_DEPTH DRM_IOW( DRM_COMMAND_BASE + DRM_R128_DEPTH, drm_r128_depth_t)
+#define DRM_IOCTL_R128_STIPPLE DRM_IOW( DRM_COMMAND_BASE + DRM_R128_STIPPLE, drm_r128_stipple_t)
+/* 0x0e not used */
+#define DRM_IOCTL_R128_INDIRECT DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t)
+#define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t)
+#define DRM_IOCTL_R128_CLEAR2 DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t)
+#define DRM_IOCTL_R128_GETPARAM DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t)
+#define DRM_IOCTL_R128_FLIP DRM_IO( DRM_COMMAND_BASE + DRM_R128_FLIP)
+
+typedef struct drm_r128_init {
+ enum {
+ R128_INIT_CCE = 0x01,
+ R128_CLEANUP_CCE = 0x02
+ } func;
+ unsigned long sarea_priv_offset;
+ int is_pci;
+ int cce_mode;
+ int cce_secure;
+ int ring_size;
+ int usec_timeout;
+
+ unsigned int fb_bpp;
+ unsigned int front_offset, front_pitch;
+ unsigned int back_offset, back_pitch;
+ unsigned int depth_bpp;
+ unsigned int depth_offset, depth_pitch;
+ unsigned int span_offset;
+
+ unsigned long fb_offset;
+ unsigned long mmio_offset;
+ unsigned long ring_offset;
+ unsigned long ring_rptr_offset;
+ unsigned long buffers_offset;
+ unsigned long agp_textures_offset;
+} drm_r128_init_t;
+
+typedef struct drm_r128_cce_stop {
+ int flush;
+ int idle;
+} drm_r128_cce_stop_t;
+
+typedef struct drm_r128_clear {
+ unsigned int flags;
+ unsigned int clear_color;
+ unsigned int clear_depth;
+ unsigned int color_mask;
+ unsigned int depth_mask;
+} drm_r128_clear_t;
+
+typedef struct drm_r128_vertex {
+ int prim;
+ int idx; /* Index of vertex buffer */
+ int count; /* Number of vertices in buffer */
+ int discard; /* Client finished with buffer? */
+} drm_r128_vertex_t;
+
+typedef struct drm_r128_indices {
+ int prim;
+ int idx;
+ int start;
+ int end;
+ int discard; /* Client finished with buffer? */
+} drm_r128_indices_t;
+
+typedef struct drm_r128_blit {
+ int idx;
+ int pitch;
+ int offset;
+ int format;
+ unsigned short x, y;
+ unsigned short width, height;
+} drm_r128_blit_t;
+
+typedef struct drm_r128_depth {
+ enum {
+ R128_WRITE_SPAN = 0x01,
+ R128_WRITE_PIXELS = 0x02,
+ R128_READ_SPAN = 0x03,
+ R128_READ_PIXELS = 0x04
+ } func;
+ int n;
+ int __user *x;
+ int __user *y;
+ unsigned int __user *buffer;
+ unsigned char __user *mask;
+} drm_r128_depth_t;
+
+typedef struct drm_r128_stipple {
+ unsigned int __user *mask;
+} drm_r128_stipple_t;
+
+typedef struct drm_r128_indirect {
+ int idx;
+ int start;
+ int end;
+ int discard;
+} drm_r128_indirect_t;
+
+typedef struct drm_r128_fullscreen {
+ enum {
+ R128_INIT_FULLSCREEN = 0x01,
+ R128_CLEANUP_FULLSCREEN = 0x02
+ } func;
+} drm_r128_fullscreen_t;
+
+/* 2.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define R128_PARAM_IRQ_NR 1
+
+typedef struct drm_r128_getparam {
+ int param;
+ void __user *value;
+} drm_r128_getparam_t;
+
+#endif
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
new file mode 100644
index 00000000000..73ff51f1231
--- /dev/null
+++ b/include/drm/radeon_drm.h
@@ -0,0 +1,749 @@
+/* radeon_drm.h -- Public header for the radeon driver -*- linux-c -*-
+ *
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Kevin E. Martin <martin@valinux.com>
+ * Gareth Hughes <gareth@valinux.com>
+ * Keith Whitwell <keith@tungstengraphics.com>
+ */
+
+#ifndef __RADEON_DRM_H__
+#define __RADEON_DRM_H__
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (radeon_sarea.h)
+ */
+#ifndef __RADEON_SAREA_DEFINES__
+#define __RADEON_SAREA_DEFINES__
+
+/* Old style state flags, required for sarea interface (1.1 and 1.2
+ * clears) and 1.2 drm_vertex2 ioctl.
+ */
+#define RADEON_UPLOAD_CONTEXT 0x00000001
+#define RADEON_UPLOAD_VERTFMT 0x00000002
+#define RADEON_UPLOAD_LINE 0x00000004
+#define RADEON_UPLOAD_BUMPMAP 0x00000008
+#define RADEON_UPLOAD_MASKS 0x00000010
+#define RADEON_UPLOAD_VIEWPORT 0x00000020
+#define RADEON_UPLOAD_SETUP 0x00000040
+#define RADEON_UPLOAD_TCL 0x00000080
+#define RADEON_UPLOAD_MISC 0x00000100
+#define RADEON_UPLOAD_TEX0 0x00000200
+#define RADEON_UPLOAD_TEX1 0x00000400
+#define RADEON_UPLOAD_TEX2 0x00000800
+#define RADEON_UPLOAD_TEX0IMAGES 0x00001000
+#define RADEON_UPLOAD_TEX1IMAGES 0x00002000
+#define RADEON_UPLOAD_TEX2IMAGES 0x00004000
+#define RADEON_UPLOAD_CLIPRECTS 0x00008000 /* handled client-side */
+#define RADEON_REQUIRE_QUIESCENCE 0x00010000
+#define RADEON_UPLOAD_ZBIAS 0x00020000 /* version 1.2 and newer */
+#define RADEON_UPLOAD_ALL 0x003effff
+#define RADEON_UPLOAD_CONTEXT_ALL 0x003e01ff
+
+/* New style per-packet identifiers for use in cmd_buffer ioctl with
+ * the RADEON_EMIT_PACKET command. Comments relate new packets to old
+ * state bits and the packet size:
+ */
+#define RADEON_EMIT_PP_MISC 0 /* context/7 */
+#define RADEON_EMIT_PP_CNTL 1 /* context/3 */
+#define RADEON_EMIT_RB3D_COLORPITCH 2 /* context/1 */
+#define RADEON_EMIT_RE_LINE_PATTERN 3 /* line/2 */
+#define RADEON_EMIT_SE_LINE_WIDTH 4 /* line/1 */
+#define RADEON_EMIT_PP_LUM_MATRIX 5 /* bumpmap/1 */
+#define RADEON_EMIT_PP_ROT_MATRIX_0 6 /* bumpmap/2 */
+#define RADEON_EMIT_RB3D_STENCILREFMASK 7 /* masks/3 */
+#define RADEON_EMIT_SE_VPORT_XSCALE 8 /* viewport/6 */
+#define RADEON_EMIT_SE_CNTL 9 /* setup/2 */
+#define RADEON_EMIT_SE_CNTL_STATUS 10 /* setup/1 */
+#define RADEON_EMIT_RE_MISC 11 /* misc/1 */
+#define RADEON_EMIT_PP_TXFILTER_0 12 /* tex0/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_0 13 /* tex0/1 */
+#define RADEON_EMIT_PP_TXFILTER_1 14 /* tex1/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_1 15 /* tex1/1 */
+#define RADEON_EMIT_PP_TXFILTER_2 16 /* tex2/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_2 17 /* tex2/1 */
+#define RADEON_EMIT_SE_ZBIAS_FACTOR 18 /* zbias/2 */
+#define RADEON_EMIT_SE_TCL_OUTPUT_VTX_FMT 19 /* tcl/11 */
+#define RADEON_EMIT_SE_TCL_MATERIAL_EMMISSIVE_RED 20 /* material/17 */
+#define R200_EMIT_PP_TXCBLEND_0 21 /* tex0/4 */
+#define R200_EMIT_PP_TXCBLEND_1 22 /* tex1/4 */
+#define R200_EMIT_PP_TXCBLEND_2 23 /* tex2/4 */
+#define R200_EMIT_PP_TXCBLEND_3 24 /* tex3/4 */
+#define R200_EMIT_PP_TXCBLEND_4 25 /* tex4/4 */
+#define R200_EMIT_PP_TXCBLEND_5 26 /* tex5/4 */
+#define R200_EMIT_PP_TXCBLEND_6 27 /* /4 */
+#define R200_EMIT_PP_TXCBLEND_7 28 /* /4 */
+#define R200_EMIT_TCL_LIGHT_MODEL_CTL_0 29 /* tcl/7 */
+#define R200_EMIT_TFACTOR_0 30 /* tf/7 */
+#define R200_EMIT_VTX_FMT_0 31 /* vtx/5 */
+#define R200_EMIT_VAP_CTL 32 /* vap/1 */
+#define R200_EMIT_MATRIX_SELECT_0 33 /* msl/5 */
+#define R200_EMIT_TEX_PROC_CTL_2 34 /* tcg/5 */
+#define R200_EMIT_TCL_UCP_VERT_BLEND_CTL 35 /* tcl/1 */
+#define R200_EMIT_PP_TXFILTER_0 36 /* tex0/6 */
+#define R200_EMIT_PP_TXFILTER_1 37 /* tex1/6 */
+#define R200_EMIT_PP_TXFILTER_2 38 /* tex2/6 */
+#define R200_EMIT_PP_TXFILTER_3 39 /* tex3/6 */
+#define R200_EMIT_PP_TXFILTER_4 40 /* tex4/6 */
+#define R200_EMIT_PP_TXFILTER_5 41 /* tex5/6 */
+#define R200_EMIT_PP_TXOFFSET_0 42 /* tex0/1 */
+#define R200_EMIT_PP_TXOFFSET_1 43 /* tex1/1 */
+#define R200_EMIT_PP_TXOFFSET_2 44 /* tex2/1 */
+#define R200_EMIT_PP_TXOFFSET_3 45 /* tex3/1 */
+#define R200_EMIT_PP_TXOFFSET_4 46 /* tex4/1 */
+#define R200_EMIT_PP_TXOFFSET_5 47 /* tex5/1 */
+#define R200_EMIT_VTE_CNTL 48 /* vte/1 */
+#define R200_EMIT_OUTPUT_VTX_COMP_SEL 49 /* vtx/1 */
+#define R200_EMIT_PP_TAM_DEBUG3 50 /* tam/1 */
+#define R200_EMIT_PP_CNTL_X 51 /* cst/1 */
+#define R200_EMIT_RB3D_DEPTHXY_OFFSET 52 /* cst/1 */
+#define R200_EMIT_RE_AUX_SCISSOR_CNTL 53 /* cst/1 */
+#define R200_EMIT_RE_SCISSOR_TL_0 54 /* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_1 55 /* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_2 56 /* cst/2 */
+#define R200_EMIT_SE_VAP_CNTL_STATUS 57 /* cst/1 */
+#define R200_EMIT_SE_VTX_STATE_CNTL 58 /* cst/1 */
+#define R200_EMIT_RE_POINTSIZE 59 /* cst/1 */
+#define R200_EMIT_TCL_INPUT_VTX_VECTOR_ADDR_0 60 /* cst/4 */
+#define R200_EMIT_PP_CUBIC_FACES_0 61
+#define R200_EMIT_PP_CUBIC_OFFSETS_0 62
+#define R200_EMIT_PP_CUBIC_FACES_1 63
+#define R200_EMIT_PP_CUBIC_OFFSETS_1 64
+#define R200_EMIT_PP_CUBIC_FACES_2 65
+#define R200_EMIT_PP_CUBIC_OFFSETS_2 66
+#define R200_EMIT_PP_CUBIC_FACES_3 67
+#define R200_EMIT_PP_CUBIC_OFFSETS_3 68
+#define R200_EMIT_PP_CUBIC_FACES_4 69
+#define R200_EMIT_PP_CUBIC_OFFSETS_4 70
+#define R200_EMIT_PP_CUBIC_FACES_5 71
+#define R200_EMIT_PP_CUBIC_OFFSETS_5 72
+#define RADEON_EMIT_PP_TEX_SIZE_0 73
+#define RADEON_EMIT_PP_TEX_SIZE_1 74
+#define RADEON_EMIT_PP_TEX_SIZE_2 75
+#define R200_EMIT_RB3D_BLENDCOLOR 76
+#define R200_EMIT_TCL_POINT_SPRITE_CNTL 77
+#define RADEON_EMIT_PP_CUBIC_FACES_0 78
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T0 79
+#define RADEON_EMIT_PP_CUBIC_FACES_1 80
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T1 81
+#define RADEON_EMIT_PP_CUBIC_FACES_2 82
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T2 83
+#define R200_EMIT_PP_TRI_PERF_CNTL 84
+#define R200_EMIT_PP_AFS_0 85
+#define R200_EMIT_PP_AFS_1 86
+#define R200_EMIT_ATF_TFACTOR 87
+#define R200_EMIT_PP_TXCTLALL_0 88
+#define R200_EMIT_PP_TXCTLALL_1 89
+#define R200_EMIT_PP_TXCTLALL_2 90
+#define R200_EMIT_PP_TXCTLALL_3 91
+#define R200_EMIT_PP_TXCTLALL_4 92
+#define R200_EMIT_PP_TXCTLALL_5 93
+#define R200_EMIT_VAP_PVS_CNTL 94
+#define RADEON_MAX_STATE_PACKETS 95
+
+/* Commands understood by cmd_buffer ioctl. More can be added but
+ * obviously these can't be removed or changed:
+ */
+#define RADEON_CMD_PACKET 1 /* emit one of the register packets above */
+#define RADEON_CMD_SCALARS 2 /* emit scalar data */
+#define RADEON_CMD_VECTORS 3 /* emit vector data */
+#define RADEON_CMD_DMA_DISCARD 4 /* discard current dma buf */
+#define RADEON_CMD_PACKET3 5 /* emit hw packet */
+#define RADEON_CMD_PACKET3_CLIP 6 /* emit hw packet wrapped in cliprects */
+#define RADEON_CMD_SCALARS2 7 /* r200 stopgap */
+#define RADEON_CMD_WAIT 8 /* emit hw wait commands -- note:
+ * doesn't make the cpu wait, just
+ * the graphics hardware */
+#define RADEON_CMD_VECLINEAR 9 /* another r200 stopgap */
+
+typedef union {
+ int i;
+ struct {
+ unsigned char cmd_type, pad0, pad1, pad2;
+ } header;
+ struct {
+ unsigned char cmd_type, packet_id, pad0, pad1;
+ } packet;
+ struct {
+ unsigned char cmd_type, offset, stride, count;
+ } scalars;
+ struct {
+ unsigned char cmd_type, offset, stride, count;
+ } vectors;
+ struct {
+ unsigned char cmd_type, addr_lo, addr_hi, count;
+ } veclinear;
+ struct {
+ unsigned char cmd_type, buf_idx, pad0, pad1;
+ } dma;
+ struct {
+ unsigned char cmd_type, flags, pad0, pad1;
+ } wait;
+} drm_radeon_cmd_header_t;
+
+#define RADEON_WAIT_2D 0x1
+#define RADEON_WAIT_3D 0x2
+
+/* Allowed parameters for R300_CMD_PACKET3
+ */
+#define R300_CMD_PACKET3_CLEAR 0
+#define R300_CMD_PACKET3_RAW 1
+
+/* Commands understood by cmd_buffer ioctl for R300.
+ * The interface has not been stabilized, so some of these may be removed
+ * and eventually reordered before stabilization.
+ */
+#define R300_CMD_PACKET0 1
+#define R300_CMD_VPU 2 /* emit vertex program upload */
+#define R300_CMD_PACKET3 3 /* emit a packet3 */
+#define R300_CMD_END3D 4 /* emit sequence ending 3d rendering */
+#define R300_CMD_CP_DELAY 5
+#define R300_CMD_DMA_DISCARD 6
+#define R300_CMD_WAIT 7
+# define R300_WAIT_2D 0x1
+# define R300_WAIT_3D 0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
+# define R300_WAIT_2D_CLEAN 0x3
+# define R300_WAIT_3D_CLEAN 0x4
+
+# define R300_NEW_WAIT_2D_3D 0x3
+# define R300_NEW_WAIT_2D_2D_CLEAN 0x4
+# define R300_NEW_WAIT_3D_3D_CLEAN 0x6
+# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
+
+#define R300_CMD_SCRATCH 8
+#define R300_CMD_R500FP 9
+
+typedef union {
+ unsigned int u;
+ struct {
+ unsigned char cmd_type, pad0, pad1, pad2;
+ } header;
+ struct {
+ unsigned char cmd_type, count, reglo, reghi;
+ } packet0;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi;
+ } vpu;
+ struct {
+ unsigned char cmd_type, packet, pad0, pad1;
+ } packet3;
+ struct {
+ unsigned char cmd_type, packet;
+ unsigned short count; /* amount of packet2 to emit */
+ } delay;
+ struct {
+ unsigned char cmd_type, buf_idx, pad0, pad1;
+ } dma;
+ struct {
+ unsigned char cmd_type, flags, pad0, pad1;
+ } wait;
+ struct {
+ unsigned char cmd_type, reg, n_bufs, flags;
+ } scratch;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi_flags;
+ } r500fp;
+} drm_r300_cmd_header_t;
+
+#define RADEON_FRONT 0x1
+#define RADEON_BACK 0x2
+#define RADEON_DEPTH 0x4
+#define RADEON_STENCIL 0x8
+#define RADEON_CLEAR_FASTZ 0x80000000
+#define RADEON_USE_HIERZ 0x40000000
+#define RADEON_USE_COMP_ZBUF 0x20000000
+
+#define R500FP_CONSTANT_TYPE (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
+/* Primitive types
+ */
+#define RADEON_POINTS 0x1
+#define RADEON_LINES 0x2
+#define RADEON_LINE_STRIP 0x3
+#define RADEON_TRIANGLES 0x4
+#define RADEON_TRIANGLE_FAN 0x5
+#define RADEON_TRIANGLE_STRIP 0x6
+
+/* Vertex/indirect buffer size
+ */
+#define RADEON_BUFFER_SIZE 65536
+
+/* Byte offsets for indirect buffer data
+ */
+#define RADEON_INDEX_PRIM_OFFSET 20
+
+#define RADEON_SCRATCH_REG_OFFSET 32
+
+#define RADEON_NR_SAREA_CLIPRECTS 12
+
+/* There are 2 heaps (local/GART). Each region within a heap is a
+ * minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define RADEON_LOCAL_TEX_HEAP 0
+#define RADEON_GART_TEX_HEAP 1
+#define RADEON_NR_TEX_HEAPS 2
+#define RADEON_NR_TEX_REGIONS 64
+#define RADEON_LOG_TEX_GRANULARITY 16
+
+#define RADEON_MAX_TEXTURE_LEVELS 12
+#define RADEON_MAX_TEXTURE_UNITS 3
+
+#define RADEON_MAX_SURFACES 8
+
+/* Blits have strict offset rules. All blit offset must be aligned on
+ * a 1K-byte boundary.
+ */
+#define RADEON_OFFSET_SHIFT 10
+#define RADEON_OFFSET_ALIGN (1 << RADEON_OFFSET_SHIFT)
+#define RADEON_OFFSET_MASK (RADEON_OFFSET_ALIGN - 1)
+
+#endif /* __RADEON_SAREA_DEFINES__ */
+
+typedef struct {
+ unsigned int red;
+ unsigned int green;
+ unsigned int blue;
+ unsigned int alpha;
+} radeon_color_regs_t;
+
+typedef struct {
+ /* Context state */
+ unsigned int pp_misc; /* 0x1c14 */
+ unsigned int pp_fog_color;
+ unsigned int re_solid_color;
+ unsigned int rb3d_blendcntl;
+ unsigned int rb3d_depthoffset;
+ unsigned int rb3d_depthpitch;
+ unsigned int rb3d_zstencilcntl;
+
+ unsigned int pp_cntl; /* 0x1c38 */
+ unsigned int rb3d_cntl;
+ unsigned int rb3d_coloroffset;
+ unsigned int re_width_height;
+ unsigned int rb3d_colorpitch;
+ unsigned int se_cntl;
+
+ /* Vertex format state */
+ unsigned int se_coord_fmt; /* 0x1c50 */
+
+ /* Line state */
+ unsigned int re_line_pattern; /* 0x1cd0 */
+ unsigned int re_line_state;
+
+ unsigned int se_line_width; /* 0x1db8 */
+
+ /* Bumpmap state */
+ unsigned int pp_lum_matrix; /* 0x1d00 */
+
+ unsigned int pp_rot_matrix_0; /* 0x1d58 */
+ unsigned int pp_rot_matrix_1;
+
+ /* Mask state */
+ unsigned int rb3d_stencilrefmask; /* 0x1d7c */
+ unsigned int rb3d_ropcntl;
+ unsigned int rb3d_planemask;
+
+ /* Viewport state */
+ unsigned int se_vport_xscale; /* 0x1d98 */
+ unsigned int se_vport_xoffset;
+ unsigned int se_vport_yscale;
+ unsigned int se_vport_yoffset;
+ unsigned int se_vport_zscale;
+ unsigned int se_vport_zoffset;
+
+ /* Setup state */
+ unsigned int se_cntl_status; /* 0x2140 */
+
+ /* Misc state */
+ unsigned int re_top_left; /* 0x26c0 */
+ unsigned int re_misc;
+} drm_radeon_context_regs_t;
+
+typedef struct {
+ /* Zbias state */
+ unsigned int se_zbias_factor; /* 0x1dac */
+ unsigned int se_zbias_constant;
+} drm_radeon_context2_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+ unsigned int pp_txfilter;
+ unsigned int pp_txformat;
+ unsigned int pp_txoffset;
+ unsigned int pp_txcblend;
+ unsigned int pp_txablend;
+ unsigned int pp_tfactor;
+ unsigned int pp_border_color;
+} drm_radeon_texture_regs_t;
+
+typedef struct {
+ unsigned int start;
+ unsigned int finish;
+ unsigned int prim:8;
+ unsigned int stateidx:8;
+ unsigned int numverts:16; /* overloaded as offset/64 for elt prims */
+ unsigned int vc_format; /* vertex format */
+} drm_radeon_prim_t;
+
+typedef struct {
+ drm_radeon_context_regs_t context;
+ drm_radeon_texture_regs_t tex[RADEON_MAX_TEXTURE_UNITS];
+ drm_radeon_context2_regs_t context2;
+ unsigned int dirty;
+} drm_radeon_state_t;
+
+typedef struct {
+ /* The channel for communication of state information to the
+ * kernel on firing a vertex buffer with either of the
+ * obsoleted vertex/index ioctls.
+ */
+ drm_radeon_context_regs_t context_state;
+ drm_radeon_texture_regs_t tex_state[RADEON_MAX_TEXTURE_UNITS];
+ unsigned int dirty;
+ unsigned int vertsize;
+ unsigned int vc_format;
+
+ /* The current cliprects, or a subset thereof.
+ */
+ struct drm_clip_rect boxes[RADEON_NR_SAREA_CLIPRECTS];
+ unsigned int nbox;
+
+ /* Counters for client-side throttling of rendering clients.
+ */
+ unsigned int last_frame;
+ unsigned int last_dispatch;
+ unsigned int last_clear;
+
+ struct drm_tex_region tex_list[RADEON_NR_TEX_HEAPS][RADEON_NR_TEX_REGIONS +
+ 1];
+ unsigned int tex_age[RADEON_NR_TEX_HEAPS];
+ int ctx_owner;
+ int pfState; /* number of 3d windows (0,1,2ormore) */
+ int pfCurrentPage; /* which buffer is being displayed? */
+ int crtc2_base; /* CRTC2 frame offset */
+ int tiling_enabled; /* set by drm, read by 2d + 3d clients */
+} drm_radeon_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmRadeon.h)
+ *
+ * KW: actually it's illegal to change any of this (backwards compatibility).
+ */
+
+/* Radeon specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_RADEON_CP_INIT 0x00
+#define DRM_RADEON_CP_START 0x01
+#define DRM_RADEON_CP_STOP 0x02
+#define DRM_RADEON_CP_RESET 0x03
+#define DRM_RADEON_CP_IDLE 0x04
+#define DRM_RADEON_RESET 0x05
+#define DRM_RADEON_FULLSCREEN 0x06
+#define DRM_RADEON_SWAP 0x07
+#define DRM_RADEON_CLEAR 0x08
+#define DRM_RADEON_VERTEX 0x09
+#define DRM_RADEON_INDICES 0x0A
+#define DRM_RADEON_NOT_USED
+#define DRM_RADEON_STIPPLE 0x0C
+#define DRM_RADEON_INDIRECT 0x0D
+#define DRM_RADEON_TEXTURE 0x0E
+#define DRM_RADEON_VERTEX2 0x0F
+#define DRM_RADEON_CMDBUF 0x10
+#define DRM_RADEON_GETPARAM 0x11
+#define DRM_RADEON_FLIP 0x12
+#define DRM_RADEON_ALLOC 0x13
+#define DRM_RADEON_FREE 0x14
+#define DRM_RADEON_INIT_HEAP 0x15
+#define DRM_RADEON_IRQ_EMIT 0x16
+#define DRM_RADEON_IRQ_WAIT 0x17
+#define DRM_RADEON_CP_RESUME 0x18
+#define DRM_RADEON_SETPARAM 0x19
+#define DRM_RADEON_SURF_ALLOC 0x1a
+#define DRM_RADEON_SURF_FREE 0x1b
+
+#define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
+#define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START)
+#define DRM_IOCTL_RADEON_CP_STOP DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_STOP, drm_radeon_cp_stop_t)
+#define DRM_IOCTL_RADEON_CP_RESET DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_RESET)
+#define DRM_IOCTL_RADEON_CP_IDLE DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_IDLE)
+#define DRM_IOCTL_RADEON_RESET DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_RESET)
+#define DRM_IOCTL_RADEON_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FULLSCREEN, drm_radeon_fullscreen_t)
+#define DRM_IOCTL_RADEON_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_SWAP)
+#define DRM_IOCTL_RADEON_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CLEAR, drm_radeon_clear_t)
+#define DRM_IOCTL_RADEON_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX, drm_radeon_vertex_t)
+#define DRM_IOCTL_RADEON_INDICES DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INDICES, drm_radeon_indices_t)
+#define DRM_IOCTL_RADEON_STIPPLE DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_STIPPLE, drm_radeon_stipple_t)
+#define DRM_IOCTL_RADEON_INDIRECT DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INDIRECT, drm_radeon_indirect_t)
+#define DRM_IOCTL_RADEON_TEXTURE DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_TEXTURE, drm_radeon_texture_t)
+#define DRM_IOCTL_RADEON_VERTEX2 DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX2, drm_radeon_vertex2_t)
+#define DRM_IOCTL_RADEON_CMDBUF DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CMDBUF, drm_radeon_cmd_buffer_t)
+#define DRM_IOCTL_RADEON_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GETPARAM, drm_radeon_getparam_t)
+#define DRM_IOCTL_RADEON_FLIP DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_FLIP)
+#define DRM_IOCTL_RADEON_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_ALLOC, drm_radeon_mem_alloc_t)
+#define DRM_IOCTL_RADEON_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FREE, drm_radeon_mem_free_t)
+#define DRM_IOCTL_RADEON_INIT_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INIT_HEAP, drm_radeon_mem_init_heap_t)
+#define DRM_IOCTL_RADEON_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_IRQ_EMIT, drm_radeon_irq_emit_t)
+#define DRM_IOCTL_RADEON_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_IRQ_WAIT, drm_radeon_irq_wait_t)
+#define DRM_IOCTL_RADEON_CP_RESUME DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_RESUME)
+#define DRM_IOCTL_RADEON_SETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SETPARAM, drm_radeon_setparam_t)
+#define DRM_IOCTL_RADEON_SURF_ALLOC DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_ALLOC, drm_radeon_surface_alloc_t)
+#define DRM_IOCTL_RADEON_SURF_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_FREE, drm_radeon_surface_free_t)
+
+typedef struct drm_radeon_init {
+ enum {
+ RADEON_INIT_CP = 0x01,
+ RADEON_CLEANUP_CP = 0x02,
+ RADEON_INIT_R200_CP = 0x03,
+ RADEON_INIT_R300_CP = 0x04
+ } func;
+ unsigned long sarea_priv_offset;
+ int is_pci;
+ int cp_mode;
+ int gart_size;
+ int ring_size;
+ int usec_timeout;
+
+ unsigned int fb_bpp;
+ unsigned int front_offset, front_pitch;
+ unsigned int back_offset, back_pitch;
+ unsigned int depth_bpp;
+ unsigned int depth_offset, depth_pitch;
+
+ unsigned long fb_offset;
+ unsigned long mmio_offset;
+ unsigned long ring_offset;
+ unsigned long ring_rptr_offset;
+ unsigned long buffers_offset;
+ unsigned long gart_textures_offset;
+} drm_radeon_init_t;
+
+typedef struct drm_radeon_cp_stop {
+ int flush;
+ int idle;
+} drm_radeon_cp_stop_t;
+
+typedef struct drm_radeon_fullscreen {
+ enum {
+ RADEON_INIT_FULLSCREEN = 0x01,
+ RADEON_CLEANUP_FULLSCREEN = 0x02
+ } func;
+} drm_radeon_fullscreen_t;
+
+#define CLEAR_X1 0
+#define CLEAR_Y1 1
+#define CLEAR_X2 2
+#define CLEAR_Y2 3
+#define CLEAR_DEPTH 4
+
+typedef union drm_radeon_clear_rect {
+ float f[5];
+ unsigned int ui[5];
+} drm_radeon_clear_rect_t;
+
+typedef struct drm_radeon_clear {
+ unsigned int flags;
+ unsigned int clear_color;
+ unsigned int clear_depth;
+ unsigned int color_mask;
+ unsigned int depth_mask; /* misnamed field: should be stencil */
+ drm_radeon_clear_rect_t __user *depth_boxes;
+} drm_radeon_clear_t;
+
+typedef struct drm_radeon_vertex {
+ int prim;
+ int idx; /* Index of vertex buffer */
+ int count; /* Number of vertices in buffer */
+ int discard; /* Client finished with buffer? */
+} drm_radeon_vertex_t;
+
+typedef struct drm_radeon_indices {
+ int prim;
+ int idx;
+ int start;
+ int end;
+ int discard; /* Client finished with buffer? */
+} drm_radeon_indices_t;
+
+/* v1.2 - obsoletes drm_radeon_vertex and drm_radeon_indices
+ * - allows multiple primitives and state changes in a single ioctl
+ * - supports driver change to emit native primitives
+ */
+typedef struct drm_radeon_vertex2 {
+ int idx; /* Index of vertex buffer */
+ int discard; /* Client finished with buffer? */
+ int nr_states;
+ drm_radeon_state_t __user *state;
+ int nr_prims;
+ drm_radeon_prim_t __user *prim;
+} drm_radeon_vertex2_t;
+
+/* v1.3 - obsoletes drm_radeon_vertex2
+ * - allows arbitarily large cliprect list
+ * - allows updating of tcl packet, vector and scalar state
+ * - allows memory-efficient description of state updates
+ * - allows state to be emitted without a primitive
+ * (for clears, ctx switches)
+ * - allows more than one dma buffer to be referenced per ioctl
+ * - supports tcl driver
+ * - may be extended in future versions with new cmd types, packets
+ */
+typedef struct drm_radeon_cmd_buffer {
+ int bufsz;
+ char __user *buf;
+ int nbox;
+ struct drm_clip_rect __user *boxes;
+} drm_radeon_cmd_buffer_t;
+
+typedef struct drm_radeon_tex_image {
+ unsigned int x, y; /* Blit coordinates */
+ unsigned int width, height;
+ const void __user *data;
+} drm_radeon_tex_image_t;
+
+typedef struct drm_radeon_texture {
+ unsigned int offset;
+ int pitch;
+ int format;
+ int width; /* Texture image coordinates */
+ int height;
+ drm_radeon_tex_image_t __user *image;
+} drm_radeon_texture_t;
+
+typedef struct drm_radeon_stipple {
+ unsigned int __user *mask;
+} drm_radeon_stipple_t;
+
+typedef struct drm_radeon_indirect {
+ int idx;
+ int start;
+ int end;
+ int discard;
+} drm_radeon_indirect_t;
+
+/* enum for card type parameters */
+#define RADEON_CARD_PCI 0
+#define RADEON_CARD_AGP 1
+#define RADEON_CARD_PCIE 2
+
+/* 1.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define RADEON_PARAM_GART_BUFFER_OFFSET 1 /* card offset of 1st GART buffer */
+#define RADEON_PARAM_LAST_FRAME 2
+#define RADEON_PARAM_LAST_DISPATCH 3
+#define RADEON_PARAM_LAST_CLEAR 4
+/* Added with DRM version 1.6. */
+#define RADEON_PARAM_IRQ_NR 5
+#define RADEON_PARAM_GART_BASE 6 /* card offset of GART base */
+/* Added with DRM version 1.8. */
+#define RADEON_PARAM_REGISTER_HANDLE 7 /* for drmMap() */
+#define RADEON_PARAM_STATUS_HANDLE 8
+#define RADEON_PARAM_SAREA_HANDLE 9
+#define RADEON_PARAM_GART_TEX_HANDLE 10
+#define RADEON_PARAM_SCRATCH_OFFSET 11
+#define RADEON_PARAM_CARD_TYPE 12
+#define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */
+#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
+
+typedef struct drm_radeon_getparam {
+ int param;
+ void __user *value;
+} drm_radeon_getparam_t;
+
+/* 1.6: Set up a memory manager for regions of shared memory:
+ */
+#define RADEON_MEM_REGION_GART 1
+#define RADEON_MEM_REGION_FB 2
+
+typedef struct drm_radeon_mem_alloc {
+ int region;
+ int alignment;
+ int size;
+ int __user *region_offset; /* offset from start of fb or GART */
+} drm_radeon_mem_alloc_t;
+
+typedef struct drm_radeon_mem_free {
+ int region;
+ int region_offset;
+} drm_radeon_mem_free_t;
+
+typedef struct drm_radeon_mem_init_heap {
+ int region;
+ int size;
+ int start;
+} drm_radeon_mem_init_heap_t;
+
+/* 1.6: Userspace can request & wait on irq's:
+ */
+typedef struct drm_radeon_irq_emit {
+ int __user *irq_seq;
+} drm_radeon_irq_emit_t;
+
+typedef struct drm_radeon_irq_wait {
+ int irq_seq;
+} drm_radeon_irq_wait_t;
+
+/* 1.10: Clients tell the DRM where they think the framebuffer is located in
+ * the card's address space, via a new generic ioctl to set parameters
+ */
+
+typedef struct drm_radeon_setparam {
+ unsigned int param;
+ int64_t value;
+} drm_radeon_setparam_t;
+
+#define RADEON_SETPARAM_FB_LOCATION 1 /* determined framebuffer location */
+#define RADEON_SETPARAM_SWITCH_TILING 2 /* enable/disable color tiling */
+#define RADEON_SETPARAM_PCIGART_LOCATION 3 /* PCI Gart Location */
+#define RADEON_SETPARAM_NEW_MEMMAP 4 /* Use new memory map */
+#define RADEON_SETPARAM_PCIGART_TABLE_SIZE 5 /* PCI GART Table Size */
+#define RADEON_SETPARAM_VBLANK_CRTC 6 /* VBLANK CRTC */
+/* 1.14: Clients can allocate/free a surface
+ */
+typedef struct drm_radeon_surface_alloc {
+ unsigned int address;
+ unsigned int size;
+ unsigned int flags;
+} drm_radeon_surface_alloc_t;
+
+typedef struct drm_radeon_surface_free {
+ unsigned int address;
+} drm_radeon_surface_free_t;
+
+#define DRM_RADEON_VBLANK_CRTC1 1
+#define DRM_RADEON_VBLANK_CRTC2 2
+
+#endif
diff --git a/include/drm/savage_drm.h b/include/drm/savage_drm.h
new file mode 100644
index 00000000000..8a576ef0182
--- /dev/null
+++ b/include/drm/savage_drm.h
@@ -0,0 +1,210 @@
+/* savage_drm.h -- Public header for the savage driver
+ *
+ * Copyright 2004 Felix Kuehling
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __SAVAGE_DRM_H__
+#define __SAVAGE_DRM_H__
+
+#ifndef __SAVAGE_SAREA_DEFINES__
+#define __SAVAGE_SAREA_DEFINES__
+
+/* 2 heaps (1 for card, 1 for agp), each divided into upto 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define SAVAGE_CARD_HEAP 0
+#define SAVAGE_AGP_HEAP 1
+#define SAVAGE_NR_TEX_HEAPS 2
+#define SAVAGE_NR_TEX_REGIONS 16
+#define SAVAGE_LOG_MIN_TEX_REGION_SIZE 16
+
+#endif /* __SAVAGE_SAREA_DEFINES__ */
+
+typedef struct _drm_savage_sarea {
+ /* LRU lists for texture memory in agp space and on the card.
+ */
+ struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS +
+ 1];
+ unsigned int texAge[SAVAGE_NR_TEX_HEAPS];
+
+ /* Mechanism to validate card state.
+ */
+ int ctxOwner;
+} drm_savage_sarea_t, *drm_savage_sarea_ptr;
+
+/* Savage-specific ioctls
+ */
+#define DRM_SAVAGE_BCI_INIT 0x00
+#define DRM_SAVAGE_BCI_CMDBUF 0x01
+#define DRM_SAVAGE_BCI_EVENT_EMIT 0x02
+#define DRM_SAVAGE_BCI_EVENT_WAIT 0x03
+
+#define DRM_IOCTL_SAVAGE_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t)
+#define DRM_IOCTL_SAVAGE_CMDBUF DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t)
+#define DRM_IOCTL_SAVAGE_EVENT_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t)
+#define DRM_IOCTL_SAVAGE_EVENT_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t)
+
+#define SAVAGE_DMA_PCI 1
+#define SAVAGE_DMA_AGP 3
+typedef struct drm_savage_init {
+ enum {
+ SAVAGE_INIT_BCI = 1,
+ SAVAGE_CLEANUP_BCI = 2
+ } func;
+ unsigned int sarea_priv_offset;
+
+ /* some parameters */
+ unsigned int cob_size;
+ unsigned int bci_threshold_lo, bci_threshold_hi;
+ unsigned int dma_type;
+
+ /* frame buffer layout */
+ unsigned int fb_bpp;
+ unsigned int front_offset, front_pitch;
+ unsigned int back_offset, back_pitch;
+ unsigned int depth_bpp;
+ unsigned int depth_offset, depth_pitch;
+
+ /* local textures */
+ unsigned int texture_offset;
+ unsigned int texture_size;
+
+ /* physical locations of non-permanent maps */
+ unsigned long status_offset;
+ unsigned long buffers_offset;
+ unsigned long agp_textures_offset;
+ unsigned long cmd_dma_offset;
+} drm_savage_init_t;
+
+typedef union drm_savage_cmd_header drm_savage_cmd_header_t;
+typedef struct drm_savage_cmdbuf {
+ /* command buffer in client's address space */
+ drm_savage_cmd_header_t __user *cmd_addr;
+ unsigned int size; /* size of the command buffer in 64bit units */
+
+ unsigned int dma_idx; /* DMA buffer index to use */
+ int discard; /* discard DMA buffer when done */
+ /* vertex buffer in client's address space */
+ unsigned int __user *vb_addr;
+ unsigned int vb_size; /* size of client vertex buffer in bytes */
+ unsigned int vb_stride; /* stride of vertices in 32bit words */
+ /* boxes in client's address space */
+ struct drm_clip_rect __user *box_addr;
+ unsigned int nbox; /* number of clipping boxes */
+} drm_savage_cmdbuf_t;
+
+#define SAVAGE_WAIT_2D 0x1 /* wait for 2D idle before updating event tag */
+#define SAVAGE_WAIT_3D 0x2 /* wait for 3D idle before updating event tag */
+#define SAVAGE_WAIT_IRQ 0x4 /* emit or wait for IRQ, not implemented yet */
+typedef struct drm_savage_event {
+ unsigned int count;
+ unsigned int flags;
+} drm_savage_event_emit_t, drm_savage_event_wait_t;
+
+/* Commands for the cmdbuf ioctl
+ */
+#define SAVAGE_CMD_STATE 0 /* a range of state registers */
+#define SAVAGE_CMD_DMA_PRIM 1 /* vertices from DMA buffer */
+#define SAVAGE_CMD_VB_PRIM 2 /* vertices from client vertex buffer */
+#define SAVAGE_CMD_DMA_IDX 3 /* indexed vertices from DMA buffer */
+#define SAVAGE_CMD_VB_IDX 4 /* indexed vertices client vertex buffer */
+#define SAVAGE_CMD_CLEAR 5 /* clear buffers */
+#define SAVAGE_CMD_SWAP 6 /* swap buffers */
+
+/* Primitive types
+*/
+#define SAVAGE_PRIM_TRILIST 0 /* triangle list */
+#define SAVAGE_PRIM_TRISTRIP 1 /* triangle strip */
+#define SAVAGE_PRIM_TRIFAN 2 /* triangle fan */
+#define SAVAGE_PRIM_TRILIST_201 3 /* reorder verts for correct flat
+ * shading on s3d */
+
+/* Skip flags (vertex format)
+ */
+#define SAVAGE_SKIP_Z 0x01
+#define SAVAGE_SKIP_W 0x02
+#define SAVAGE_SKIP_C0 0x04
+#define SAVAGE_SKIP_C1 0x08
+#define SAVAGE_SKIP_S0 0x10
+#define SAVAGE_SKIP_T0 0x20
+#define SAVAGE_SKIP_ST0 0x30
+#define SAVAGE_SKIP_S1 0x40
+#define SAVAGE_SKIP_T1 0x80
+#define SAVAGE_SKIP_ST1 0xc0
+#define SAVAGE_SKIP_ALL_S3D 0x3f
+#define SAVAGE_SKIP_ALL_S4 0xff
+
+/* Buffer names for clear command
+ */
+#define SAVAGE_FRONT 0x1
+#define SAVAGE_BACK 0x2
+#define SAVAGE_DEPTH 0x4
+
+/* 64-bit command header
+ */
+union drm_savage_cmd_header {
+ struct {
+ unsigned char cmd; /* command */
+ unsigned char pad0;
+ unsigned short pad1;
+ unsigned short pad2;
+ unsigned short pad3;
+ } cmd; /* generic */
+ struct {
+ unsigned char cmd;
+ unsigned char global; /* need idle engine? */
+ unsigned short count; /* number of consecutive registers */
+ unsigned short start; /* first register */
+ unsigned short pad3;
+ } state; /* SAVAGE_CMD_STATE */
+ struct {
+ unsigned char cmd;
+ unsigned char prim; /* primitive type */
+ unsigned short skip; /* vertex format (skip flags) */
+ unsigned short count; /* number of vertices */
+ unsigned short start; /* first vertex in DMA/vertex buffer */
+ } prim; /* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */
+ struct {
+ unsigned char cmd;
+ unsigned char prim;
+ unsigned short skip;
+ unsigned short count; /* number of indices that follow */
+ unsigned short pad3;
+ } idx; /* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */
+ struct {
+ unsigned char cmd;
+ unsigned char pad0;
+ unsigned short pad1;
+ unsigned int flags;
+ } clear0; /* SAVAGE_CMD_CLEAR */
+ struct {
+ unsigned int mask;
+ unsigned int value;
+ } clear1; /* SAVAGE_CMD_CLEAR data */
+};
+
+#endif
diff --git a/include/drm/sis_drm.h b/include/drm/sis_drm.h
new file mode 100644
index 00000000000..30f7b382746
--- /dev/null
+++ b/include/drm/sis_drm.h
@@ -0,0 +1,67 @@
+/* sis_drv.h -- Private header for sis driver -*- linux-c -*- */
+/*
+ * Copyright 2005 Eric Anholt
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef __SIS_DRM_H__
+#define __SIS_DRM_H__
+
+/* SiS specific ioctls */
+#define NOT_USED_0_3
+#define DRM_SIS_FB_ALLOC 0x04
+#define DRM_SIS_FB_FREE 0x05
+#define NOT_USED_6_12
+#define DRM_SIS_AGP_INIT 0x13
+#define DRM_SIS_AGP_ALLOC 0x14
+#define DRM_SIS_AGP_FREE 0x15
+#define DRM_SIS_FB_INIT 0x16
+
+#define DRM_IOCTL_SIS_FB_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_FB_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_INIT, drm_sis_agp_t)
+#define DRM_IOCTL_SIS_AGP_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_AGP_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_INIT, drm_sis_fb_t)
+/*
+#define DRM_IOCTL_SIS_FLIP DRM_IOW( 0x48, drm_sis_flip_t)
+#define DRM_IOCTL_SIS_FLIP_INIT DRM_IO( 0x49)
+#define DRM_IOCTL_SIS_FLIP_FINAL DRM_IO( 0x50)
+*/
+
+typedef struct {
+ int context;
+ unsigned int offset;
+ unsigned int size;
+ unsigned long free;
+} drm_sis_mem_t;
+
+typedef struct {
+ unsigned int offset, size;
+} drm_sis_agp_t;
+
+typedef struct {
+ unsigned int offset, size;
+} drm_sis_fb_t;
+
+#endif /* __SIS_DRM_H__ */
diff --git a/include/drm/via_drm.h b/include/drm/via_drm.h
new file mode 100644
index 00000000000..a3b5c102b06
--- /dev/null
+++ b/include/drm/via_drm.h
@@ -0,0 +1,275 @@
+/*
+ * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _VIA_DRM_H_
+#define _VIA_DRM_H_
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _VIA_DEFINES_
+#define _VIA_DEFINES_
+
+#ifndef __KERNEL__
+#include "via_drmclient.h"
+#endif
+
+#define VIA_NR_SAREA_CLIPRECTS 8
+#define VIA_NR_XVMC_PORTS 10
+#define VIA_NR_XVMC_LOCKS 5
+#define VIA_MAX_CACHELINE_SIZE 64
+#define XVMCLOCKPTR(saPriv,lockNo) \
+ ((volatile struct drm_hw_lock *)(((((unsigned long) (saPriv)->XvMCLockArea) + \
+ (VIA_MAX_CACHELINE_SIZE - 1)) & \
+ ~(VIA_MAX_CACHELINE_SIZE - 1)) + \
+ VIA_MAX_CACHELINE_SIZE*(lockNo)))
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define VIA_NR_TEX_REGIONS 64
+#define VIA_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define VIA_UPLOAD_TEX0IMAGE 0x1 /* handled clientside */
+#define VIA_UPLOAD_TEX1IMAGE 0x2 /* handled clientside */
+#define VIA_UPLOAD_CTX 0x4
+#define VIA_UPLOAD_BUFFERS 0x8
+#define VIA_UPLOAD_TEX0 0x10
+#define VIA_UPLOAD_TEX1 0x20
+#define VIA_UPLOAD_CLIPRECTS 0x40
+#define VIA_UPLOAD_ALL 0xff
+
+/* VIA specific ioctls */
+#define DRM_VIA_ALLOCMEM 0x00
+#define DRM_VIA_FREEMEM 0x01
+#define DRM_VIA_AGP_INIT 0x02
+#define DRM_VIA_FB_INIT 0x03
+#define DRM_VIA_MAP_INIT 0x04
+#define DRM_VIA_DEC_FUTEX 0x05
+#define NOT_USED
+#define DRM_VIA_DMA_INIT 0x07
+#define DRM_VIA_CMDBUFFER 0x08
+#define DRM_VIA_FLUSH 0x09
+#define DRM_VIA_PCICMD 0x0a
+#define DRM_VIA_CMDBUF_SIZE 0x0b
+#define NOT_USED
+#define DRM_VIA_WAIT_IRQ 0x0d
+#define DRM_VIA_DMA_BLIT 0x0e
+#define DRM_VIA_BLIT_SYNC 0x0f
+
+#define DRM_IOCTL_VIA_ALLOCMEM DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_ALLOCMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_FREEMEM DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_FREEMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_AGP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_AGP_INIT, drm_via_agp_t)
+#define DRM_IOCTL_VIA_FB_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_FB_INIT, drm_via_fb_t)
+#define DRM_IOCTL_VIA_MAP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_MAP_INIT, drm_via_init_t)
+#define DRM_IOCTL_VIA_DEC_FUTEX DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_DEC_FUTEX, drm_via_futex_t)
+#define DRM_IOCTL_VIA_DMA_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_DMA_INIT, drm_via_dma_init_t)
+#define DRM_IOCTL_VIA_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_CMDBUFFER, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_FLUSH DRM_IO( DRM_COMMAND_BASE + DRM_VIA_FLUSH)
+#define DRM_IOCTL_VIA_PCICMD DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_PCICMD, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_CMDBUF_SIZE DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_CMDBUF_SIZE, \
+ drm_via_cmdbuf_size_t)
+#define DRM_IOCTL_VIA_WAIT_IRQ DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_WAIT_IRQ, drm_via_irqwait_t)
+#define DRM_IOCTL_VIA_DMA_BLIT DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_DMA_BLIT, drm_via_dmablit_t)
+#define DRM_IOCTL_VIA_BLIT_SYNC DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_BLIT_SYNC, drm_via_blitsync_t)
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer. These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+#define VIA_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define VIA_FRONT 0x1
+#define VIA_BACK 0x2
+#define VIA_DEPTH 0x4
+#define VIA_STENCIL 0x8
+#define VIA_MEM_VIDEO 0 /* matches drm constant */
+#define VIA_MEM_AGP 1 /* matches drm constant */
+#define VIA_MEM_SYSTEM 2
+#define VIA_MEM_MIXED 3
+#define VIA_MEM_UNKNOWN 4
+
+typedef struct {
+ uint32_t offset;
+ uint32_t size;
+} drm_via_agp_t;
+
+typedef struct {
+ uint32_t offset;
+ uint32_t size;
+} drm_via_fb_t;
+
+typedef struct {
+ uint32_t context;
+ uint32_t type;
+ uint32_t size;
+ unsigned long index;
+ unsigned long offset;
+} drm_via_mem_t;
+
+typedef struct _drm_via_init {
+ enum {
+ VIA_INIT_MAP = 0x01,
+ VIA_CLEANUP_MAP = 0x02
+ } func;
+
+ unsigned long sarea_priv_offset;
+ unsigned long fb_offset;
+ unsigned long mmio_offset;
+ unsigned long agpAddr;
+} drm_via_init_t;
+
+typedef struct _drm_via_futex {
+ enum {
+ VIA_FUTEX_WAIT = 0x00,
+ VIA_FUTEX_WAKE = 0X01
+ } func;
+ uint32_t ms;
+ uint32_t lock;
+ uint32_t val;
+} drm_via_futex_t;
+
+typedef struct _drm_via_dma_init {
+ enum {
+ VIA_INIT_DMA = 0x01,
+ VIA_CLEANUP_DMA = 0x02,
+ VIA_DMA_INITIALIZED = 0x03
+ } func;
+
+ unsigned long offset;
+ unsigned long size;
+ unsigned long reg_pause_addr;
+} drm_via_dma_init_t;
+
+typedef struct _drm_via_cmdbuffer {
+ char __user *buf;
+ unsigned long size;
+} drm_via_cmdbuffer_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_via_tex_region {
+ unsigned char next, prev; /* indices to form a circular LRU */
+ unsigned char inUse; /* owned by a client, or free? */
+ int age; /* tracked by clients to update local LRU's */
+} drm_via_tex_region_t;
+
+typedef struct _drm_via_sarea {
+ unsigned int dirty;
+ unsigned int nbox;
+ struct drm_clip_rect boxes[VIA_NR_SAREA_CLIPRECTS];
+ drm_via_tex_region_t texList[VIA_NR_TEX_REGIONS + 1];
+ int texAge; /* last time texture was uploaded */
+ int ctxOwner; /* last context to upload state */
+ int vertexPrim;
+
+ /*
+ * Below is for XvMC.
+ * We want the lock integers alone on, and aligned to, a cache line.
+ * Therefore this somewhat strange construct.
+ */
+
+ char XvMCLockArea[VIA_MAX_CACHELINE_SIZE * (VIA_NR_XVMC_LOCKS + 1)];
+
+ unsigned int XvMCDisplaying[VIA_NR_XVMC_PORTS];
+ unsigned int XvMCSubPicOn[VIA_NR_XVMC_PORTS];
+ unsigned int XvMCCtxNoGrabbed; /* Last context to hold decoder */
+
+ /* Used by the 3d driver only at this point, for pageflipping:
+ */
+ unsigned int pfCurrentOffset;
+} drm_via_sarea_t;
+
+typedef struct _drm_via_cmdbuf_size {
+ enum {
+ VIA_CMDBUF_SPACE = 0x01,
+ VIA_CMDBUF_LAG = 0x02
+ } func;
+ int wait;
+ uint32_t size;
+} drm_via_cmdbuf_size_t;
+
+typedef enum {
+ VIA_IRQ_ABSOLUTE = 0x0,
+ VIA_IRQ_RELATIVE = 0x1,
+ VIA_IRQ_SIGNAL = 0x10000000,
+ VIA_IRQ_FORCE_SEQUENCE = 0x20000000
+} via_irq_seq_type_t;
+
+#define VIA_IRQ_FLAGS_MASK 0xF0000000
+
+enum drm_via_irqs {
+ drm_via_irq_hqv0 = 0,
+ drm_via_irq_hqv1,
+ drm_via_irq_dma0_dd,
+ drm_via_irq_dma0_td,
+ drm_via_irq_dma1_dd,
+ drm_via_irq_dma1_td,
+ drm_via_irq_num
+};
+
+struct drm_via_wait_irq_request {
+ unsigned irq;
+ via_irq_seq_type_t type;
+ uint32_t sequence;
+ uint32_t signal;
+};
+
+typedef union drm_via_irqwait {
+ struct drm_via_wait_irq_request request;
+ struct drm_wait_vblank_reply reply;
+} drm_via_irqwait_t;
+
+typedef struct drm_via_blitsync {
+ uint32_t sync_handle;
+ unsigned engine;
+} drm_via_blitsync_t;
+
+/* - * Below,"flags" is currently unused but will be used for possible future
+ * extensions like kernel space bounce buffers for bad alignments and
+ * blit engine busy-wait polling for better latency in the absence of
+ * interrupts.
+ */
+
+typedef struct drm_via_dmablit {
+ uint32_t num_lines;
+ uint32_t line_length;
+
+ uint32_t fb_addr;
+ uint32_t fb_stride;
+
+ unsigned char *mem_addr;
+ uint32_t mem_stride;
+
+ uint32_t flags;
+ int to_fb;
+
+ drm_via_blitsync_t sync;
+} drm_via_dmablit_t;
+
+#endif /* _VIA_DRM_H_ */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 41f7ce7edd7..a1717763937 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -82,6 +82,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
int early_acpi_boot_init(void);
int acpi_boot_init (void);
int acpi_boot_table_init (void);
+int acpi_mps_check (void);
int acpi_numa_init (void);
int acpi_table_init (void);
@@ -234,6 +235,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
#else /* CONFIG_ACPI */
static inline int early_acpi_boot_init(void)
@@ -250,6 +254,11 @@ static inline int acpi_boot_table_init(void)
return 0;
}
+static inline int acpi_mps_check(void)
+{
+ return 0;
+}
+
static inline int acpi_check_resource_conflict(struct resource *res)
{
return 0;
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 64d8878e144..63bca502fa5 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -84,7 +84,6 @@ enum adb_message {
ADB_MSG_PRE_RESET, /* Called before resetting the bus */
ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */
};
-extern struct adb_driver *adb_controller;
extern struct blocking_notifier_head adb_client_list;
int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 61c15eaf3fb..0933a14e641 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -64,6 +64,7 @@ struct bio_vec {
struct bio_set;
struct bio;
+struct bio_integrity_payload;
typedef void (bio_end_io_t) (struct bio *, int);
typedef void (bio_destructor_t) (struct bio *);
@@ -112,6 +113,9 @@ struct bio {
atomic_t bi_cnt; /* pin count */
void *bi_private;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload *bi_integrity; /* data integrity */
+#endif
bio_destructor_t *bi_destructor; /* destructor */
};
@@ -271,6 +275,29 @@ static inline void *bio_data(struct bio *bio)
*/
#define bio_get(bio) atomic_inc(&(bio)->bi_cnt)
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+/*
+ * bio integrity payload
+ */
+struct bio_integrity_payload {
+ struct bio *bip_bio; /* parent bio */
+ struct bio_vec *bip_vec; /* integrity data vector */
+
+ sector_t bip_sector; /* virtual start sector */
+
+ void *bip_buf; /* generated integrity data */
+ bio_end_io_t *bip_end_io; /* saved I/O completion fn */
+
+ int bip_error; /* saved I/O error */
+ unsigned int bip_size;
+
+ unsigned short bip_pool; /* pool the ivec came from */
+ unsigned short bip_vcnt; /* # of integrity bio_vecs */
+ unsigned short bip_idx; /* current bip_vec index */
+
+ struct work_struct bip_work; /* I/O completion */
+};
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
/*
* A bio_pair is used when we need to split a bio.
@@ -283,10 +310,14 @@ static inline void *bio_data(struct bio *bio)
* in bio2.bi_private
*/
struct bio_pair {
- struct bio bio1, bio2;
- struct bio_vec bv1, bv2;
- atomic_t cnt;
- int error;
+ struct bio bio1, bio2;
+ struct bio_vec bv1, bv2;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload bip1, bip2;
+ struct bio_vec iv1, iv2;
+#endif
+ atomic_t cnt;
+ int error;
};
extern struct bio_pair *bio_split(struct bio *bi, mempool_t *pool,
int first_sectors);
@@ -333,6 +364,39 @@ extern struct bio *bio_copy_user_iov(struct request_queue *, struct sg_iovec *,
int, int);
extern int bio_uncopy_user(struct bio *);
void zero_fill_bio(struct bio *bio);
+extern struct bio_vec *bvec_alloc_bs(gfp_t, int, unsigned long *, struct bio_set *);
+extern unsigned int bvec_nr_vecs(unsigned short idx);
+
+/*
+ * bio_set is used to allow other portions of the IO system to
+ * allocate their own private memory pools for bio and iovec structures.
+ * These memory pools in turn all allocate from the bio_slab
+ * and the bvec_slabs[].
+ */
+#define BIO_POOL_SIZE 2
+#define BIOVEC_NR_POOLS 6
+
+struct bio_set {
+ mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ mempool_t *bio_integrity_pool;
+#endif
+ mempool_t *bvec_pools[BIOVEC_NR_POOLS];
+};
+
+struct biovec_slab {
+ int nr_vecs;
+ char *name;
+ struct kmem_cache *slab;
+};
+
+extern struct bio_set *fs_bio_set;
+
+/*
+ * a small number of entries is fine, not going to be performance critical.
+ * basically we just need to survive
+ */
+#define BIO_SPLIT_ENTRIES 2
#ifdef CONFIG_HIGHMEM
/*
@@ -381,5 +445,63 @@ static inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx,
__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
#define bio_kunmap_irq(buf,flags) __bio_kunmap_irq(buf, flags)
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)]))
+#define bip_vec(bip) bip_vec_idx(bip, 0)
+
+#define __bip_for_each_vec(bvl, bip, i, start_idx) \
+ for (bvl = bip_vec_idx((bip), (start_idx)), i = (start_idx); \
+ i < (bip)->bip_vcnt; \
+ bvl++, i++)
+
+#define bip_for_each_vec(bvl, bip, i) \
+ __bip_for_each_vec(bvl, bip, i, (bip)->bip_idx)
+
+static inline int bio_integrity(struct bio *bio)
+{
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ return bio->bi_integrity != NULL;
+#else
+ return 0;
+#endif
+}
+
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
+extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
+extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
+extern int bio_integrity_enabled(struct bio *bio);
+extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_get_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_prep(struct bio *);
+extern void bio_integrity_endio(struct bio *, int);
+extern void bio_integrity_advance(struct bio *, unsigned int);
+extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
+extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
+extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init_slab(void);
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define bio_integrity(a) (0)
+#define bioset_integrity_create(a, b) (0)
+#define bio_integrity_prep(a) (0)
+#define bio_integrity_enabled(a) (0)
+#define bio_integrity_clone(a, b, c) (0)
+#define bioset_integrity_free(a) do { } while (0)
+#define bio_integrity_free(a, b) do { } while (0)
+#define bio_integrity_endio(a, b) do { } while (0)
+#define bio_integrity_advance(a, b) do { } while (0)
+#define bio_integrity_trim(a, b, c) do { } while (0)
+#define bio_integrity_split(a, b, c) do { } while (0)
+#define bio_integrity_set_tag(a, b, c) do { } while (0)
+#define bio_integrity_get_tag(a, b, c) do { } while (0)
+#define bio_integrity_init_slab(a) do { } while (0)
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
#endif /* CONFIG_BLOCK */
#endif /* __LINUX_BIO_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d2a1b71e93c..88d68081a0f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -23,7 +23,6 @@
struct scsi_ioctl_command;
struct request_queue;
-typedef struct request_queue request_queue_t __deprecated;
struct elevator_queue;
typedef struct elevator_queue elevator_t;
struct request_pm_state;
@@ -34,12 +33,6 @@ struct sg_io_hdr;
#define BLKDEV_MIN_RQ 4
#define BLKDEV_MAX_RQ 128 /* Default maximum */
-int put_io_context(struct io_context *ioc);
-void exit_io_context(void);
-struct io_context *get_io_context(gfp_t gfp_flags, int node);
-struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc);
-
struct request;
typedef void (rq_end_io_fn)(struct request *, int);
@@ -113,6 +106,7 @@ enum rq_flag_bits {
__REQ_ALLOCED, /* request came from our alloc pool */
__REQ_RW_META, /* metadata io request */
__REQ_COPY_USER, /* contains copies of user pages */
+ __REQ_INTEGRITY, /* integrity metadata has been remapped */
__REQ_NR_BITS, /* stops here */
};
@@ -135,6 +129,7 @@ enum rq_flag_bits {
#define REQ_ALLOCED (1 << __REQ_ALLOCED)
#define REQ_RW_META (1 << __REQ_RW_META)
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
+#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
#define BLK_MAX_CDB 16
@@ -259,7 +254,14 @@ typedef int (prep_rq_fn) (struct request_queue *, struct request *);
typedef void (unplug_fn) (struct request_queue *);
struct bio_vec;
-typedef int (merge_bvec_fn) (struct request_queue *, struct bio *, struct bio_vec *);
+struct bvec_merge_data {
+ struct block_device *bi_bdev;
+ sector_t bi_sector;
+ unsigned bi_size;
+ unsigned long bi_rw;
+};
+typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
+ struct bio_vec *);
typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
typedef int (dma_drain_needed_fn)(struct request *);
@@ -426,6 +428,32 @@ static inline void queue_flag_set_unlocked(unsigned int flag,
__set_bit(flag, &q->queue_flags);
}
+static inline int queue_flag_test_and_clear(unsigned int flag,
+ struct request_queue *q)
+{
+ WARN_ON_ONCE(!queue_is_locked(q));
+
+ if (test_bit(flag, &q->queue_flags)) {
+ __clear_bit(flag, &q->queue_flags);
+ return 1;
+ }
+
+ return 0;
+}
+
+static inline int queue_flag_test_and_set(unsigned int flag,
+ struct request_queue *q)
+{
+ WARN_ON_ONCE(!queue_is_locked(q));
+
+ if (!test_bit(flag, &q->queue_flags)) {
+ __set_bit(flag, &q->queue_flags);
+ return 0;
+ }
+
+ return 1;
+}
+
static inline void queue_flag_set(unsigned int flag, struct request_queue *q)
{
WARN_ON_ONCE(!queue_is_locked(q));
@@ -623,7 +651,6 @@ extern void generic_make_request(struct bio *bio);
extern void blk_rq_init(struct request_queue *q, struct request *rq);
extern void blk_put_request(struct request *);
extern void __blk_put_request(struct request_queue *, struct request *);
-extern void blk_end_sync_rq(struct request *rq, int error);
extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
extern void blk_requeue_request(struct request_queue *, struct request *);
@@ -676,7 +703,6 @@ extern int blk_execute_rq(struct request_queue *, struct gendisk *,
struct request *, int);
extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
struct request *, int, rq_end_io_fn *);
-extern int blk_verify_command(unsigned char *, int);
extern void blk_unplug(struct request_queue *q);
static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
@@ -749,6 +775,7 @@ extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
+extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
extern int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size);
@@ -802,6 +829,15 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
extern int blkdev_issue_flush(struct block_device *, sector_t *);
+/*
+* command filter functions
+*/
+extern int blk_verify_command(struct file *file, unsigned char *cmd);
+extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
+ unsigned char *cmd, mode_t *f_mode);
+extern int blk_register_filter(struct gendisk *disk);
+extern void blk_unregister_filter(struct gendisk *disk);
+
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
#define SAFE_MAX_SECTORS 255
@@ -865,28 +901,119 @@ void kblockd_flush_work(struct work_struct *work);
#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
MODULE_ALIAS("block-major-" __stringify(major) "-*")
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
-#else /* CONFIG_BLOCK */
-/*
- * stubs for when the block layer is configured out
- */
-#define buffer_heads_over_limit 0
+#define INTEGRITY_FLAG_READ 2 /* verify data integrity on read */
+#define INTEGRITY_FLAG_WRITE 4 /* generate data integrity on write */
-static inline long nr_blockdev_pages(void)
+struct blk_integrity_exchg {
+ void *prot_buf;
+ void *data_buf;
+ sector_t sector;
+ unsigned int data_size;
+ unsigned short sector_size;
+ const char *disk_name;
+};
+
+typedef void (integrity_gen_fn) (struct blk_integrity_exchg *);
+typedef int (integrity_vrfy_fn) (struct blk_integrity_exchg *);
+typedef void (integrity_set_tag_fn) (void *, void *, unsigned int);
+typedef void (integrity_get_tag_fn) (void *, void *, unsigned int);
+
+struct blk_integrity {
+ integrity_gen_fn *generate_fn;
+ integrity_vrfy_fn *verify_fn;
+ integrity_set_tag_fn *set_tag_fn;
+ integrity_get_tag_fn *get_tag_fn;
+
+ unsigned short flags;
+ unsigned short tuple_size;
+ unsigned short sector_size;
+ unsigned short tag_size;
+
+ const char *name;
+
+ struct kobject kobj;
+};
+
+extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
+extern void blk_integrity_unregister(struct gendisk *);
+extern int blk_integrity_compare(struct block_device *, struct block_device *);
+extern int blk_rq_map_integrity_sg(struct request *, struct scatterlist *);
+extern int blk_rq_count_integrity_sg(struct request *);
+
+static inline unsigned short blk_integrity_tuple_size(struct blk_integrity *bi)
{
+ if (bi)
+ return bi->tuple_size;
+
return 0;
}
-static inline void exit_io_context(void)
+static inline struct blk_integrity *bdev_get_integrity(struct block_device *bdev)
{
+ return bdev->bd_disk->integrity;
}
-struct io_context;
-static inline int put_io_context(struct io_context *ioc)
+static inline unsigned int bdev_get_tag_size(struct block_device *bdev)
{
- return 1;
+ struct blk_integrity *bi = bdev_get_integrity(bdev);
+
+ if (bi)
+ return bi->tag_size;
+
+ return 0;
+}
+
+static inline int bdev_integrity_enabled(struct block_device *bdev, int rw)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bdev);
+
+ if (bi == NULL)
+ return 0;
+
+ if (rw == READ && bi->verify_fn != NULL &&
+ (bi->flags & INTEGRITY_FLAG_READ))
+ return 1;
+
+ if (rw == WRITE && bi->generate_fn != NULL &&
+ (bi->flags & INTEGRITY_FLAG_WRITE))
+ return 1;
+
+ return 0;
}
+static inline int blk_integrity_rq(struct request *rq)
+{
+ if (rq->bio == NULL)
+ return 0;
+
+ return bio_integrity(rq->bio);
+}
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define blk_integrity_rq(rq) (0)
+#define blk_rq_count_integrity_sg(a) (0)
+#define blk_rq_map_integrity_sg(a, b) (0)
+#define bdev_get_integrity(a) (0)
+#define bdev_get_tag_size(a) (0)
+#define blk_integrity_compare(a, b) (0)
+#define blk_integrity_register(a, b) (0)
+#define blk_integrity_unregister(a) do { } while (0);
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
+#else /* CONFIG_BLOCK */
+/*
+ * stubs for when the block layer is configured out
+ */
+#define buffer_heads_over_limit 0
+
+static inline long nr_blockdev_pages(void)
+{
+ return 0;
+}
#endif /* CONFIG_BLOCK */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index e3ef903aae8..d084b8d227a 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -129,6 +129,7 @@ struct blk_trace {
u32 dev;
struct dentry *dir;
struct dentry *dropped_file;
+ struct dentry *msg_file;
atomic_t dropped;
};
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 686895bacd9..a1d9b79078e 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -84,6 +84,8 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
__alloc_bootmem_low(x, PAGE_SIZE, 0)
#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+ int flags);
extern unsigned long free_all_bootmem(void);
extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
extern void *__alloc_bootmem_node(pg_data_t *pgdat,
diff --git a/include/linux/capability.h b/include/linux/capability.h
index fa830f8de03..02673846d20 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -501,6 +501,8 @@ extern const kernel_cap_t __cap_empty_set;
extern const kernel_cap_t __cap_full_set;
extern const kernel_cap_t __cap_init_eff_set;
+kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
+
int capable(int cap);
int __capable(struct task_struct *t, int cap);
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 1605dd8aa64..6f9f19d6659 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -4,7 +4,7 @@
* Description: cfag12864b LCD driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-12
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index 3ae65b1bf90..0488f937634 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -165,8 +165,8 @@ struct configfs_item_operations {
};
struct configfs_group_operations {
- struct config_item *(*make_item)(struct config_group *group, const char *name);
- struct config_group *(*make_group)(struct config_group *group, const char *name);
+ int (*make_item)(struct config_group *group, const char *name, struct config_item **new_item);
+ int (*make_group)(struct config_group *group, const char *name, struct config_group **new_group);
int (*commit_item)(struct config_item *item);
void (*disconnect_notify)(struct config_group *group, struct config_item *item);
void (*drop_item)(struct config_group *group, struct config_item *item);
diff --git a/include/linux/console.h b/include/linux/console.h
index a4f27fbdf54..248e6e3b9b7 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -108,6 +108,8 @@ struct console {
struct console *next;
};
+extern int console_set_on_cmdline;
+
extern int add_preferred_console(char *name, int idx, char *options);
extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options);
extern void register_console(struct console *);
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 5df3db58fcc..c24875bd9c5 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -353,6 +353,10 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
#endif /* NR_CPUS */
+#define next_cpu_nr(n, src) next_cpu(n, src)
+#define cpus_weight_nr(cpumask) cpus_weight(cpumask)
+#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
+
/*
* The following particular system cpumasks and operations manage
* possible, present and online cpus. Each of them is a fixed size
diff --git a/include/linux/crc-t10dif.h b/include/linux/crc-t10dif.h
new file mode 100644
index 00000000000..a9c96d865ee
--- /dev/null
+++ b/include/linux/crc-t10dif.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_CRC_T10DIF_H
+#define _LINUX_CRC_T10DIF_H
+
+#include <linux/types.h>
+
+__u16 crc_t10dif(unsigned char const *, size_t);
+
+#endif
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index 425824bd49f..c43dc47fdf7 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -30,15 +30,17 @@
*/
#define CRYPTO_ALG_TYPE_MASK 0x0000000f
#define CRYPTO_ALG_TYPE_CIPHER 0x00000001
-#define CRYPTO_ALG_TYPE_DIGEST 0x00000002
-#define CRYPTO_ALG_TYPE_HASH 0x00000003
+#define CRYPTO_ALG_TYPE_COMPRESS 0x00000002
+#define CRYPTO_ALG_TYPE_AEAD 0x00000003
#define CRYPTO_ALG_TYPE_BLKCIPHER 0x00000004
#define CRYPTO_ALG_TYPE_ABLKCIPHER 0x00000005
#define CRYPTO_ALG_TYPE_GIVCIPHER 0x00000006
-#define CRYPTO_ALG_TYPE_COMPRESS 0x00000008
-#define CRYPTO_ALG_TYPE_AEAD 0x00000009
+#define CRYPTO_ALG_TYPE_DIGEST 0x00000008
+#define CRYPTO_ALG_TYPE_HASH 0x00000009
+#define CRYPTO_ALG_TYPE_AHASH 0x0000000a
#define CRYPTO_ALG_TYPE_HASH_MASK 0x0000000e
+#define CRYPTO_ALG_TYPE_AHASH_MASK 0x0000000c
#define CRYPTO_ALG_TYPE_BLKCIPHER_MASK 0x0000000c
#define CRYPTO_ALG_LARVAL 0x00000010
@@ -102,6 +104,7 @@ struct crypto_async_request;
struct crypto_aead;
struct crypto_blkcipher;
struct crypto_hash;
+struct crypto_ahash;
struct crypto_tfm;
struct crypto_type;
struct aead_givcrypt_request;
@@ -131,6 +134,16 @@ struct ablkcipher_request {
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
+struct ahash_request {
+ struct crypto_async_request base;
+
+ unsigned int nbytes;
+ struct scatterlist *src;
+ u8 *result;
+
+ void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
/**
* struct aead_request - AEAD request
* @base: Common attributes for async crypto requests
@@ -195,6 +208,17 @@ struct ablkcipher_alg {
unsigned int ivsize;
};
+struct ahash_alg {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ unsigned int digestsize;
+};
+
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen);
@@ -272,6 +296,7 @@ struct compress_alg {
#define cra_cipher cra_u.cipher
#define cra_digest cra_u.digest
#define cra_hash cra_u.hash
+#define cra_ahash cra_u.ahash
#define cra_compress cra_u.compress
struct crypto_alg {
@@ -298,6 +323,7 @@ struct crypto_alg {
struct cipher_alg cipher;
struct digest_alg digest;
struct hash_alg hash;
+ struct ahash_alg ahash;
struct compress_alg compress;
} cra_u;
@@ -383,6 +409,18 @@ struct hash_tfm {
unsigned int digestsize;
};
+struct ahash_tfm {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ unsigned int digestsize;
+ unsigned int reqsize;
+};
+
struct compress_tfm {
int (*cot_compress)(struct crypto_tfm *tfm,
const u8 *src, unsigned int slen,
@@ -397,6 +435,7 @@ struct compress_tfm {
#define crt_blkcipher crt_u.blkcipher
#define crt_cipher crt_u.cipher
#define crt_hash crt_u.hash
+#define crt_ahash crt_u.ahash
#define crt_compress crt_u.compress
struct crypto_tfm {
@@ -409,6 +448,7 @@ struct crypto_tfm {
struct blkcipher_tfm blkcipher;
struct cipher_tfm cipher;
struct hash_tfm hash;
+ struct ahash_tfm ahash;
struct compress_tfm compress;
} crt_u;
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index d982eb89c77..98202c672fd 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -3,6 +3,7 @@
#include <asm/atomic.h>
#include <linux/list.h>
+#include <linux/rculist.h>
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/rcupdate.h>
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index f4a5871767f..4aaa4afb1cb 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_DEBUG_LOCKING_H
#define __LINUX_DEBUG_LOCKING_H
+#include <linux/kernel.h>
+
struct task_struct;
extern int debug_locks;
@@ -11,14 +13,6 @@ extern int debug_locks_silent;
*/
extern int debug_locks_off(void);
-/*
- * In the debug case we carry the caller's instruction pointer into
- * other functions, but we dont want the function argument overhead
- * in the nondebug case - hence these macros:
- */
-#define _RET_IP_ (unsigned long)__builtin_return_address(0)
-#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-
#define DEBUG_LOCKS_WARN_ON(c) \
({ \
int __ret = 0; \
diff --git a/include/linux/delay.h b/include/linux/delay.h
index 54552d21296..fd832c6d419 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -41,6 +41,7 @@ static inline void ndelay(unsigned long x)
#define ndelay(x) ndelay(x)
#endif
+extern unsigned long lpj_fine;
void calibrate_delay(void);
void msleep(unsigned int msecs);
unsigned long msleep_interruptible(unsigned int msecs);
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a2d04c011b..f71a78d123a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -68,6 +68,8 @@ struct bus_type {
int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
+ struct pm_ext_ops *pm;
+
struct bus_type_private *p;
};
@@ -131,6 +133,8 @@ struct device_driver {
int (*resume) (struct device *dev);
struct attribute_group **groups;
+ struct pm_ops *pm;
+
struct driver_private *p;
};
@@ -197,6 +201,8 @@ struct class {
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
extern int __must_check class_register(struct class *class);
@@ -248,8 +254,11 @@ struct device_type {
struct attribute_group **groups;
int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
void (*release)(struct device *dev);
+
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
/* interface for exporting device attributes */
diff --git a/include/linux/efi.h b/include/linux/efi.h
index a5f359a7ad0..807373d467f 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -287,7 +287,6 @@ efi_guid_unparse(efi_guid_t *guid, char *out)
extern void efi_init (void);
extern void *efi_get_pal_addr (void);
extern void efi_map_pal_code (void);
-extern void efi_map_memmap(void);
extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
extern void efi_gettimeofday (struct timespec *ts);
extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */
@@ -295,14 +294,11 @@ extern u64 efi_get_iobase (void);
extern u32 efi_mem_type (unsigned long phys_addr);
extern u64 efi_mem_attributes (unsigned long phys_addr);
extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size,
- u64 attr);
extern int __init efi_uart_console_only (void);
extern void efi_initialize_iomem_resources(struct resource *code_resource,
struct resource *data_resource, struct resource *bss_resource);
extern unsigned long efi_get_time(void);
extern int efi_set_rtc_mmss(unsigned long nowtime);
-extern int is_available_memory(efi_memory_desc_t * md);
extern struct efi_memory_map memmap;
/**
diff --git a/include/linux/elf.h b/include/linux/elf.h
index ff9fbed9012..edc3dac3f02 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -358,6 +358,7 @@ typedef struct elf64_shdr {
#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */
#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
new file mode 100644
index 00000000000..acbdbcc1605
--- /dev/null
+++ b/include/linux/firmware-map.h
@@ -0,0 +1,74 @@
+/*
+ * include/linux/firmware-map.h:
+ * Copyright (C) 2008 SUSE LINUX Products GmbH
+ * by Bernhard Walle <bwalle@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_FIRMWARE_MAP_H
+#define _LINUX_FIRMWARE_MAP_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+
+/*
+ * provide a dummy interface if CONFIG_FIRMWARE_MEMMAP is disabled
+ */
+#ifdef CONFIG_FIRMWARE_MEMMAP
+
+/**
+ * Adds a firmware mapping entry. This function uses kmalloc() for memory
+ * allocation. Use firmware_map_add_early() if you want to use the bootmem
+ * allocator.
+ *
+ * That function must be called before late_initcall.
+ *
+ * @start: Start of the memory range.
+ * @end: End of the memory range (inclusive).
+ * @type: Type of the memory range.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int firmware_map_add(resource_size_t start, resource_size_t end,
+ const char *type);
+
+/**
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
+ *
+ * That function must be called before late_initcall.
+ *
+ * @start: Start of the memory range.
+ * @end: End of the memory range (inclusive).
+ * @type: Type of the memory range.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int firmware_map_add_early(resource_size_t start, resource_size_t end,
+ const char *type);
+
+#else /* CONFIG_FIRMWARE_MEMMAP */
+
+static inline int firmware_map_add(resource_size_t start, resource_size_t end,
+ const char *type)
+{
+ return 0;
+}
+
+static inline int firmware_map_add_early(resource_size_t start,
+ resource_size_t end, const char *type)
+{
+ return 0;
+}
+
+#endif /* CONFIG_FIRMWARE_MEMMAP */
+
+#endif /* _LINUX_FIRMWARE_MAP_H */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 4d10c7328d2..c8ecf5b2a20 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -1,19 +1,40 @@
#ifndef _LINUX_FIRMWARE_H
#define _LINUX_FIRMWARE_H
+
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/compiler.h>
+
#define FIRMWARE_NAME_MAX 30
#define FW_ACTION_NOHOTPLUG 0
#define FW_ACTION_HOTPLUG 1
struct firmware {
size_t size;
- u8 *data;
+ const u8 *data;
};
struct device;
-#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+struct builtin_fw {
+ char *name;
+ void *data;
+ unsigned long size;
+};
+
+/* We have to play tricks here much like stringify() to get the
+ __COUNTER__ macro to be expanded as we want it */
+#define __fw_concat1(x, y) x##y
+#define __fw_concat(x, y) __fw_concat1(x, y)
+
+#define DECLARE_BUILTIN_FIRMWARE(name, blob) \
+ DECLARE_BUILTIN_FIRMWARE_SIZE(name, &(blob), sizeof(blob))
+
+#define DECLARE_BUILTIN_FIRMWARE_SIZE(name, blob, size) \
+ static const struct builtin_fw __fw_concat(__builtin_fw,__COUNTER__) \
+ __used __section(.builtin_fw) = { name, blob, size }
+
+#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
int request_firmware(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_nowait(
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index 08934995c7a..deddeedf325 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -128,6 +128,15 @@ static inline void set_freezable(void)
}
/*
+ * Tell the freezer that the current task should be frozen by it and that it
+ * should send a fake signal to the task to freeze it.
+ */
+static inline void set_freezable_with_signal(void)
+{
+ current->flags &= ~(PF_NOFREEZE | PF_FREEZER_NOSIG);
+}
+
+/*
* Freezer-friendly wrappers around wait_event_interruptible() and
* wait_event_interruptible_timeout(), originally defined in <linux/wait.h>
*/
@@ -174,6 +183,7 @@ static inline void freezer_do_not_count(void) {}
static inline void freezer_count(void) {}
static inline int freezer_should_skip(struct task_struct *p) { return 0; }
static inline void set_freezable(void) {}
+static inline void set_freezable_with_signal(void) {}
#define wait_event_freezable(wq, condition) \
wait_event_interruptible(wq, condition)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d8e2762ed14..c6455dadb21 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1729,6 +1729,8 @@ static inline void invalidate_remote_inode(struct inode *inode)
extern int invalidate_inode_pages2(struct address_space *mapping);
extern int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
+extern void generic_sync_sb_inodes(struct super_block *sb,
+ struct writeback_control *wbc);
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
@@ -1740,6 +1742,8 @@ extern int wait_on_page_writeback_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
extern int __filemap_fdatawrite_range(struct address_space *mapping,
loff_t start, loff_t end, int sync_mode);
+extern int filemap_fdatawrite_range(struct address_space *mapping,
+ loff_t start, loff_t end);
extern long do_fsync(struct file *file, int datasync);
extern void sync_supers(void);
@@ -1870,7 +1874,8 @@ extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
-extern loff_t remote_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t generic_file_llseek_unlocked(struct file *file, loff_t offset,
+ int origin);
extern int generic_file_open(struct inode * inode, struct file * filp);
extern int nonseekable_open(struct inode * inode, struct file * filp);
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
new file mode 100644
index 00000000000..f368d041e02
--- /dev/null
+++ b/include/linux/ftrace.h
@@ -0,0 +1,144 @@
+#ifndef _LINUX_FTRACE_H
+#define _LINUX_FTRACE_H
+
+#ifdef CONFIG_FTRACE
+
+#include <linux/linkage.h>
+#include <linux/fs.h>
+
+extern int ftrace_enabled;
+extern int
+ftrace_enable_sysctl(struct ctl_table *table, int write,
+ struct file *filp, void __user *buffer, size_t *lenp,
+ loff_t *ppos);
+
+typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
+
+struct ftrace_ops {
+ ftrace_func_t func;
+ struct ftrace_ops *next;
+};
+
+/*
+ * The ftrace_ops must be a static and should also
+ * be read_mostly. These functions do modify read_mostly variables
+ * so use them sparely. Never free an ftrace_op or modify the
+ * next pointer after it has been registered. Even after unregistering
+ * it, the next pointer may still be used internally.
+ */
+int register_ftrace_function(struct ftrace_ops *ops);
+int unregister_ftrace_function(struct ftrace_ops *ops);
+void clear_ftrace_function(void);
+
+extern void ftrace_stub(unsigned long a0, unsigned long a1);
+
+#else /* !CONFIG_FTRACE */
+# define register_ftrace_function(ops) do { } while (0)
+# define unregister_ftrace_function(ops) do { } while (0)
+# define clear_ftrace_function(ops) do { } while (0)
+#endif /* CONFIG_FTRACE */
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+# define FTRACE_HASHBITS 10
+# define FTRACE_HASHSIZE (1<<FTRACE_HASHBITS)
+
+enum {
+ FTRACE_FL_FREE = (1 << 0),
+ FTRACE_FL_FAILED = (1 << 1),
+ FTRACE_FL_FILTER = (1 << 2),
+ FTRACE_FL_ENABLED = (1 << 3),
+ FTRACE_FL_NOTRACE = (1 << 4),
+ FTRACE_FL_CONVERTED = (1 << 5),
+ FTRACE_FL_FROZEN = (1 << 6),
+};
+
+struct dyn_ftrace {
+ struct hlist_node node;
+ unsigned long ip; /* address of mcount call-site */
+ unsigned long flags;
+};
+
+int ftrace_force_update(void);
+void ftrace_set_filter(unsigned char *buf, int len, int reset);
+
+/* defined in arch */
+extern int ftrace_ip_converted(unsigned long ip);
+extern unsigned char *ftrace_nop_replace(void);
+extern unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr);
+extern int ftrace_dyn_arch_init(void *data);
+extern int ftrace_mcount_set(unsigned long *data);
+extern int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+ unsigned char *new_code);
+extern int ftrace_update_ftrace_func(ftrace_func_t func);
+extern void ftrace_caller(void);
+extern void ftrace_call(void);
+extern void mcount_call(void);
+
+extern int skip_trace(unsigned long ip);
+
+void ftrace_disable_daemon(void);
+void ftrace_enable_daemon(void);
+
+#else
+# define skip_trace(ip) ({ 0; })
+# define ftrace_force_update() ({ 0; })
+# define ftrace_set_filter(buf, len, reset) do { } while (0)
+# define ftrace_disable_daemon() do { } while (0)
+# define ftrace_enable_daemon() do { } while (0)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/* totally disable ftrace - can not re-enable after this */
+void ftrace_kill(void);
+void ftrace_kill_atomic(void);
+
+static inline void tracer_disable(void)
+{
+#ifdef CONFIG_FTRACE
+ ftrace_enabled = 0;
+#endif
+}
+
+#ifdef CONFIG_FRAME_POINTER
+/* TODO: need to fix this for ARM */
+# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
+# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
+# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
+# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
+# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
+# define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
+#else
+# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+# define CALLER_ADDR1 0UL
+# define CALLER_ADDR2 0UL
+# define CALLER_ADDR3 0UL
+# define CALLER_ADDR4 0UL
+# define CALLER_ADDR5 0UL
+# define CALLER_ADDR6 0UL
+#endif
+
+#ifdef CONFIG_IRQSOFF_TRACER
+ extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
+ extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
+#else
+# define time_hardirqs_on(a0, a1) do { } while (0)
+# define time_hardirqs_off(a0, a1) do { } while (0)
+#endif
+
+#ifdef CONFIG_PREEMPT_TRACER
+ extern void trace_preempt_on(unsigned long a0, unsigned long a1);
+ extern void trace_preempt_off(unsigned long a0, unsigned long a1);
+#else
+# define trace_preempt_on(a0, a1) do { } while (0)
+# define trace_preempt_off(a0, a1) do { } while (0)
+#endif
+
+#ifdef CONFIG_TRACING
+extern void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
+#else
+static inline void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
+#endif
+
+#endif /* _LINUX_FTRACE_H */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index ae7aec3cabe..e8787417f65 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -110,6 +110,14 @@ struct hd_struct {
#define GENHD_FL_SUPPRESS_PARTITION_INFO 32
#define GENHD_FL_FAIL 64
+#define BLK_SCSI_MAX_CMDS (256)
+#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_scsi_cmd_filter {
+ unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+ unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+ struct kobject kobj;
+};
struct gendisk {
int major; /* major number of driver */
@@ -120,6 +128,7 @@ struct gendisk {
struct hd_struct **part; /* [indexed by minor] */
struct block_device_operations *fops;
struct request_queue *queue;
+ struct blk_scsi_cmd_filter cmd_filter;
void *private_data;
sector_t capacity;
@@ -141,6 +150,9 @@ struct gendisk {
struct disk_stats dkstats;
#endif
struct work_struct async_notify;
+#ifdef CONFIG_BLK_DEV_INTEGRITY
+ struct blk_integrity *integrity;
+#endif
};
/*
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 77afbb60fd1..0177d280f73 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -33,9 +33,11 @@ struct i2c_algo_pcf_data {
int (*getclock) (void *data);
void (*waitforpin) (void);
- /* local settings */
- int udelay;
- int timeout;
+ /* Multi-master lost arbitration back-off delay (msecs)
+ * This should be set by the bus adapter or knowledgable client
+ * if bus is multi-mastered, else zero
+ */
+ unsigned long lab_mdelay;
};
int i2c_pcf_add_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 580acc93903..ef13b7c66df 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -91,8 +91,6 @@
#define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */
#define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */
-#define I2C_DRIVERID_I2CDEV 900
-
#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */
/*
@@ -111,7 +109,6 @@
#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
-#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */
#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */
#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 8dc73013219..08be0d21864 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -35,6 +35,8 @@
#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
+extern struct bus_type i2c_bus_type;
+
/* --- General options ------------------------------------------------ */
struct i2c_msg;
@@ -43,6 +45,7 @@ struct i2c_adapter;
struct i2c_client;
struct i2c_driver;
union i2c_smbus_data;
+struct i2c_board_info;
/*
* The master routines are the ones normally used to transmit data to devices
@@ -69,9 +72,8 @@ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
union i2c_smbus_data * data);
/* Now follow the 'nice' access routines. These also document the calling
- conventions of smbus_access. */
+ conventions of i2c_smbus_xfer. */
-extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
extern s32 i2c_smbus_read_byte(struct i2c_client * client);
extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
@@ -93,15 +95,33 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
u8 command, u8 length,
const u8 *values);
-/*
- * A driver is capable of handling one or more physical devices present on
- * I2C adapters. This information is used to inform the driver of adapter
- * events.
+/**
+ * struct i2c_driver - represent an I2C device driver
+ * @class: What kind of i2c device we instantiate (for detect)
+ * @detect: Callback for device detection
+ * @address_data: The I2C addresses to probe, ignore or force (for detect)
+ * @clients: List of detected clients we created (for i2c-core use only)
*
* The driver.owner field should be set to the module owner of this driver.
* The driver.name field should be set to the name of this driver.
+ *
+ * For automatic device detection, both @detect and @address_data must
+ * be defined. @class should also be set, otherwise only devices forced
+ * with module parameters will be created. The detect function must
+ * fill at least the name field of the i2c_board_info structure it is
+ * handed upon successful detection, and possibly also the flags field.
+ *
+ * If @detect is missing, the driver will still work fine for enumerated
+ * devices. Detected devices simply won't be supported. This is expected
+ * for the many I2C/SMBus devices which can't be detected reliably, and
+ * the ones which can always be enumerated in practice.
+ *
+ * The i2c_client structure which is handed to the @detect callback is
+ * not a real i2c_client. It is initialized just enough so that you can
+ * call i2c_smbus_read_byte_data and friends on it. Don't do anything
+ * else with it. In particular, calling dev_dbg and friends on it is
+ * not allowed.
*/
-
struct i2c_driver {
int id;
unsigned int class;
@@ -141,6 +161,11 @@ struct i2c_driver {
struct device_driver driver;
const struct i2c_device_id *id_table;
+
+ /* Device detection callback for automatic device creation */
+ int (*detect)(struct i2c_client *, int kind, struct i2c_board_info *);
+ const struct i2c_client_address_data *address_data;
+ struct list_head clients;
};
#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
@@ -156,6 +181,7 @@ struct i2c_driver {
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
* @list: list of active/busy clients (DEPRECATED)
+ * @detected: member of an i2c_driver.clients list
* @released: used to synchronize client releases & detaches and references
*
* An i2c_client identifies a single device (i.e. chip) connected to an
@@ -173,6 +199,7 @@ struct i2c_client {
struct device dev; /* the device structure */
int irq; /* irq issued by device */
struct list_head list; /* DEPRECATED */
+ struct list_head detected;
struct completion released;
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
@@ -350,10 +377,11 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
#define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */
#define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */
#define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */
-#define I2C_CLASS_DDC (1<<3) /* i2c-matroxfb ? */
+#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */
#define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */
#define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */
#define I2C_CLASS_SOUND (1<<6) /* sound devices */
+#define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */
#define I2C_CLASS_ALL (UINT_MAX) /* all of the above */
/* i2c_client_address_data is the struct for holding default client
@@ -537,7 +565,7 @@ union i2c_smbus_data {
/* and one more for user-space compatibility */
};
-/* smbus_access read or write markers */
+/* i2c_smbus_xfer read or write markers */
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h
new file mode 100644
index 00000000000..f6edd522a92
--- /dev/null
+++ b/include/linux/i2c/at24.h
@@ -0,0 +1,28 @@
+#ifndef _LINUX_AT24_H
+#define _LINUX_AT24_H
+
+#include <linux/types.h>
+
+/*
+ * As seen through Linux I2C, differences between the most common types of I2C
+ * memory include:
+ * - How much memory is available (usually specified in bit)?
+ * - What write page size does it support?
+ * - Special flags (16 bit addresses, read_only, world readable...)?
+ *
+ * If you set up a custom eeprom type, please double-check the parameters.
+ * Especially page_size needs extra care, as you risk data loss if your value
+ * is bigger than what the chip actually supports!
+ */
+
+struct at24_platform_data {
+ u32 byte_len; /* size (sum of all addr) */
+ u16 page_size; /* for writes */
+ u8 flags;
+#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */
+#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */
+#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */
+#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */
+};
+
+#endif /* _LINUX_AT24_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9918772bf27..4726126f5a5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -139,6 +139,12 @@ struct ide_io_ports {
#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
/*
+ * Op codes for special requests to be handled by ide_special_rq().
+ * Values should be in the range of 0x20 to 0x3f.
+ */
+#define REQ_DRIVE_RESET 0x20
+
+/*
* Check for an interrupt and acknowledge the interrupt status
*/
struct hwif_s;
@@ -171,7 +177,7 @@ typedef struct hw_regs_s {
int irq; /* our irq number */
ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
hwif_chipset_t chipset;
- struct device *dev;
+ struct device *dev, *parent;
} hw_regs_t;
void ide_init_port_data(struct hwif_s *, unsigned int);
@@ -189,6 +195,21 @@ static inline void ide_std_init_ports(hw_regs_t *hw,
hw->io_ports.ctl_addr = ctl_addr;
}
+/* for IDE PCI controllers in legacy mode, temporary */
+static inline int __ide_default_irq(unsigned long base)
+{
+ switch (base) {
+#ifdef CONFIG_IA64
+ case 0x1f0: return isa_irq_to_vector(14);
+ case 0x170: return isa_irq_to_vector(15);
+#else
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+#endif
+ }
+ return 0;
+}
+
#include <asm/ide.h>
#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
@@ -349,7 +370,6 @@ typedef struct ide_drive_s {
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 media; /* disk, cdrom, tape, floppy, ... */
- u8 ctl; /* "normal" value for Control register */
u8 ready_stat; /* min status value for drive ready */
u8 mult_count; /* current multiple sector setting */
u8 mult_req; /* requested multiple sector setting */
@@ -391,8 +411,8 @@ typedef struct ide_drive_s {
struct ide_port_info;
struct ide_port_ops {
- /* host specific initialization of devices on a port */
- void (*port_init_devs)(struct hwif_s *);
+ /* host specific initialization of a device */
+ void (*init_dev)(ide_drive_t *);
/* routine to program host for PIO mode */
void (*set_pio_mode)(ide_drive_t *, const u8);
/* routine to program host for DMA mode */
@@ -478,7 +498,7 @@ typedef struct hwif_s {
void (*ide_dma_clear_irq)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
- void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
+ void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
u8 (*INB)(unsigned long port);
@@ -517,7 +537,6 @@ typedef struct hwif_s {
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
- unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct device *portdev;
@@ -552,8 +571,6 @@ typedef struct hwgroup_s {
unsigned int sleeping : 1;
/* BOOL: polling active & poll_timeout field valid */
unsigned int polling : 1;
- /* BOOL: in a polling reset situation. Must not trigger another reset yet */
- unsigned int resetting : 1;
/* current drive */
ide_drive_t *drive;
@@ -589,12 +606,13 @@ enum {
PC_FLAG_SUPPRESS_ERROR = (1 << 1),
PC_FLAG_WAIT_FOR_DSC = (1 << 2),
PC_FLAG_DMA_OK = (1 << 3),
- PC_FLAG_DMA_RECOMMENDED = (1 << 4),
- PC_FLAG_DMA_IN_PROGRESS = (1 << 5),
- PC_FLAG_DMA_ERROR = (1 << 6),
- PC_FLAG_WRITING = (1 << 7),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
/* command timed out */
- PC_FLAG_TIMEDOUT = (1 << 8),
+ PC_FLAG_TIMEDOUT = (1 << 7),
+ PC_FLAG_ZIP_DRIVE = (1 << 8),
+ PC_FLAG_DRQ_INTERRUPT = (1 << 9),
};
struct ide_atapi_pc {
@@ -627,8 +645,8 @@ struct ide_atapi_pc {
* to change/removal later.
*/
u8 pc_buf[256];
- void (*idefloppy_callback) (ide_drive_t *);
- ide_startstop_t (*idetape_callback) (ide_drive_t *);
+
+ void (*callback)(ide_drive_t *);
/* idetape only */
struct idetape_bh *bh;
@@ -772,7 +790,6 @@ struct ide_driver_s {
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
- ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
struct device_driver gen_driver;
int (*probe)(ide_drive_t *);
void (*remove)(ide_drive_t *);
@@ -787,22 +804,6 @@ struct ide_driver_s {
int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
-/*
- * ide_hwifs[] is the master data structure used to keep track
- * of just about everything in ide.c. Whenever possible, routines
- * should be using pointers to a drive (ide_drive_t *) or
- * pointers to a hwif (ide_hwif_t *), rather than indexing this
- * structure directly (the allocation/layout may change!).
- *
- */
-#ifndef _IDE_C
-extern ide_hwif_t ide_hwifs[]; /* master data repository */
-#endif
-extern int ide_noacpi;
-extern int ide_acpigtf;
-extern int ide_acpionboot;
-extern int noautodma;
-
extern int ide_vlb_clk;
extern int ide_pci_clk;
@@ -830,10 +831,6 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
-ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
-
-extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
-
extern void ide_fix_driveid(struct hd_driveid *);
extern void ide_fixstring(u8 *, const int, const int);
@@ -842,25 +839,12 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
extern ide_startstop_t ide_do_reset (ide_drive_t *);
-extern void ide_init_drive_cmd (struct request *rq);
-
-/*
- * "action" parameter type for ide_do_drive_cmd() below.
- */
-typedef enum {
- ide_wait, /* insert rq at end of list, and wait for it */
- ide_preempt, /* insert rq in front of current request */
- ide_head_wait, /* insert rq in front of current request and wait for it */
- ide_end /* insert rq at end of list, but don't wait for it */
-} ide_action_t;
-
-extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
+extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
enum {
IDE_TFLAG_LBA48 = (1 << 0),
- IDE_TFLAG_NO_SELECT_MASK = (1 << 1),
IDE_TFLAG_FLAGGED = (1 << 2),
IDE_TFLAG_OUT_DATA = (1 << 3),
IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
@@ -965,11 +949,23 @@ typedef struct ide_task_s {
void ide_tf_dump(const char *, struct ide_taskfile *);
extern void SELECT_DRIVE(ide_drive_t *);
+void SELECT_MASK(ide_drive_t *, int);
extern int drive_is_ready(ide_drive_t *);
void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
+ void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
+ void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
+ void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
+ int));
+ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);
@@ -981,8 +977,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
-extern int system_bus_clock(void);
-
extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);
@@ -1264,16 +1258,43 @@ static inline int ide_dev_is_sata(struct hd_driveid *id)
u64 ide_get_lba_addr(struct ide_taskfile *, int);
u8 ide_dump_status(ide_drive_t *, const char *, u8);
-typedef struct ide_pio_timings_s {
- int setup_time; /* Address setup (ns) minimum */
- int active_time; /* Active pulse (ns) minimum */
- int cycle_time; /* Cycle time (ns) minimum = */
- /* active + recovery (+ setup for some chips) */
-} ide_pio_timings_t;
+struct ide_timing {
+ u8 mode;
+ u8 setup; /* t1 */
+ u16 act8b; /* t2 for 8-bit io */
+ u16 rec8b; /* t2i for 8-bit io */
+ u16 cyc8b; /* t0 for 8-bit io */
+ u16 active; /* t2 or tD */
+ u16 recover; /* t2i or tK */
+ u16 cycle; /* t0 */
+ u16 udma; /* t2CYCTYP/2 */
+};
+
+enum {
+ IDE_TIMING_SETUP = (1 << 0),
+ IDE_TIMING_ACT8B = (1 << 1),
+ IDE_TIMING_REC8B = (1 << 2),
+ IDE_TIMING_CYC8B = (1 << 3),
+ IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+ IDE_TIMING_CYC8B,
+ IDE_TIMING_ACTIVE = (1 << 4),
+ IDE_TIMING_RECOVER = (1 << 5),
+ IDE_TIMING_CYCLE = (1 << 6),
+ IDE_TIMING_UDMA = (1 << 7),
+ IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+ IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+ IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
+struct ide_timing *ide_timing_find_mode(u8);
+u16 ide_pio_cycle_time(ide_drive_t *, u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+ struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
+int ide_scan_pio_blacklist(char *);
-unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
-extern const ide_pio_timings_t ide_pio_timings[6];
int ide_set_pio_mode(ide_drive_t *, u8);
int ide_set_dma_mode(ide_drive_t *, u8);
@@ -1334,7 +1355,8 @@ static inline void ide_set_irq(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = drive->hwif;
- hwif->OUTB(drive->ctl | (on ? 0 : 2), hwif->io_ports.ctl_addr);
+ hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
+ hwif->io_ports.ctl_addr);
}
static inline u8 ide_read_status(ide_drive_t *drive)
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
new file mode 100644
index 00000000000..2baace2788a
--- /dev/null
+++ b/include/linux/ihex.h
@@ -0,0 +1,74 @@
+/*
+ * Compact binary representation of ihex records. Some devices need their
+ * firmware loaded in strange orders rather than a single big blob, but
+ * actually parsing ihex-as-text within the kernel seems silly. Thus,...
+ */
+
+#ifndef __LINUX_IHEX_H__
+#define __LINUX_IHEX_H__
+
+#include <linux/types.h>
+#include <linux/firmware.h>
+#include <linux/device.h>
+
+/* Intel HEX files actually limit the length to 256 bytes, but we have
+ drivers which would benefit from using separate records which are
+ longer than that, so we extend to 16 bits of length */
+struct ihex_binrec {
+ __be32 addr;
+ __be16 len;
+ uint8_t data[0];
+} __attribute__((aligned(4)));
+
+/* Find the next record, taking into account the 4-byte alignment */
+static inline const struct ihex_binrec *
+ihex_next_binrec(const struct ihex_binrec *rec)
+{
+ int next = ((be16_to_cpu(rec->len) + 5) & ~3) - 2;
+ rec = (void *)&rec->data[next];
+
+ return be16_to_cpu(rec->len) ? rec : NULL;
+}
+
+/* Check that ihex_next_binrec() won't take us off the end of the image... */
+static inline int ihex_validate_fw(const struct firmware *fw)
+{
+ const struct ihex_binrec *rec;
+ size_t ofs = 0;
+
+ while (ofs <= fw->size - sizeof(*rec)) {
+ rec = (void *)&fw->data[ofs];
+
+ /* Zero length marks end of records */
+ if (!be16_to_cpu(rec->len))
+ return 0;
+
+ /* Point to next record... */
+ ofs += (sizeof(*rec) + be16_to_cpu(rec->len) + 3) & ~3;
+ }
+ return -EINVAL;
+}
+
+/* Request firmware and validate it so that we can trust we won't
+ * run off the end while reading records... */
+static inline int request_ihex_firmware(const struct firmware **fw,
+ const char *fw_name,
+ struct device *dev)
+{
+ const struct firmware *lfw;
+ int ret;
+
+ ret = request_firmware(&lfw, fw_name, dev);
+ if (ret)
+ return ret;
+ ret = ihex_validate_fw(lfw);
+ if (ret) {
+ dev_err(dev, "Firmware \"%s\" not valid IHEX records\n",
+ fw_name);
+ release_firmware(lfw);
+ return ret;
+ }
+ *fw = lfw;
+ return 0;
+}
+#endif /* __LINUX_IHEX_H__ */
diff --git a/include/linux/inet.h b/include/linux/inet.h
index 1354080cf8c..4cca05c9678 100644
--- a/include/linux/inet.h
+++ b/include/linux/inet.h
@@ -44,6 +44,13 @@
#include <linux/types.h>
+/*
+ * These mimic similar macros defined in user-space for inet_ntop(3).
+ * See /usr/include/netinet/in.h .
+ */
+#define INET_ADDRSTRLEN (16)
+#define INET6_ADDRSTRLEN (48)
+
extern __be32 in_aton(const char *str);
extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 9927a88674a..93c45acf249 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -140,8 +140,8 @@ extern struct group_info init_groups;
.nr_cpus_allowed = NR_CPUS, \
}, \
.tasks = LIST_HEAD_INIT(tsk.tasks), \
- .ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children), \
- .ptrace_list = LIST_HEAD_INIT(tsk.ptrace_list), \
+ .ptraced = LIST_HEAD_INIT(tsk.ptraced), \
+ .ptrace_entry = LIST_HEAD_INIT(tsk.ptrace_entry), \
.real_parent = &tsk, \
.parent = &tsk, \
.children = LIST_HEAD_INIT(tsk.children), \
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index f1fc7470d26..62aa4f895ab 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -104,8 +104,11 @@ extern void enable_irq(unsigned int irq);
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+extern cpumask_t irq_default_affinity;
+
extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
extern int irq_can_set_affinity(unsigned int irq);
+extern int irq_select_affinity(unsigned int irq);
#else /* CONFIG_SMP */
@@ -119,6 +122,8 @@ static inline int irq_can_set_affinity(unsigned int irq)
return 0;
}
+static inline int irq_select_affinity(unsigned int irq) { return 0; }
+
#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
#ifdef CONFIG_GENERIC_HARDIRQS
@@ -285,12 +290,11 @@ enum
struct softirq_action
{
void (*action)(struct softirq_action *);
- void *data;
};
asmlinkage void do_softirq(void);
asmlinkage void __do_softirq(void);
-extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
+extern void open_softirq(int nr, void (*action)(struct softirq_action *));
extern void softirq_init(void);
#define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
extern void raise_softirq_irqoff(unsigned int nr);
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 2b7a1187cb2..08b987bccf8 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -99,4 +99,22 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
return NULL;
}
+#ifdef CONFIG_BLOCK
+int put_io_context(struct io_context *ioc);
+void exit_io_context(void);
+struct io_context *get_io_context(gfp_t gfp_flags, int node);
+struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
+void copy_io_context(struct io_context **pdst, struct io_context **psrc);
+#else
+static inline void exit_io_context(void)
+{
+}
+
+struct io_context;
+static inline int put_io_context(struct io_context *ioc)
+{
+ return 1;
+}
+#endif
+
#endif
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index c6801bffe76..2cd07cc2968 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -59,6 +59,7 @@ struct resource_list {
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
+#define IORESOURCE_IRQ_OPTIONAL (1<<5)
/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
@@ -88,6 +89,10 @@ struct resource_list {
#define IORESOURCE_MEM_SHADOWABLE (1<<5) /* dup: IORESOURCE_SHADOWABLE */
#define IORESOURCE_MEM_EXPANSIONROM (1<<6)
+/* PnP I/O specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_IO_16BIT_ADDR (1<<0)
+#define IORESOURCE_IO_FIXED (1<<1)
+
/* PCI ROM control bits (IORESOURCE_BITS) */
#define IORESOURCE_ROM_ENABLE (1<<0) /* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
#define IORESOURCE_ROM_SHADOW (1<<1) /* ROM is copy at C000:0 */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 552e0ec269c..8ccb462ea42 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -244,15 +244,6 @@ static inline void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
}
#endif
-#ifdef CONFIG_AUTO_IRQ_AFFINITY
-extern int select_smp_affinity(unsigned int irq);
-#else
-static inline int select_smp_affinity(unsigned int irq)
-{
- return 1;
-}
-#endif
-
extern int no_irq_affinity;
static inline int irq_balancing_disabled(unsigned int irq)
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index e600c4e9b8c..2b1c2e58566 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -12,10 +12,10 @@
#define _LINUX_TRACE_IRQFLAGS_H
#ifdef CONFIG_TRACE_IRQFLAGS
- extern void trace_hardirqs_on(void);
- extern void trace_hardirqs_off(void);
extern void trace_softirqs_on(unsigned long ip);
extern void trace_softirqs_off(unsigned long ip);
+ extern void trace_hardirqs_on(void);
+ extern void trace_hardirqs_off(void);
# define trace_hardirq_context(p) ((p)->hardirq_context)
# define trace_softirq_context(p) ((p)->softirq_context)
# define trace_hardirqs_enabled(p) ((p)->hardirqs_enabled)
@@ -41,6 +41,15 @@
# define INIT_TRACE_IRQFLAGS
#endif
+#if defined(CONFIG_IRQSOFF_TRACER) || \
+ defined(CONFIG_PREEMPT_TRACER)
+ extern void stop_critical_timings(void);
+ extern void start_critical_timings(void);
+#else
+# define stop_critical_timings() do { } while (0)
+# define start_critical_timings() do { } while (0)
+#endif
+
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
#include <asm/irqflags.h>
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index d147f0f9036..3dd20900709 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -168,6 +168,8 @@ struct commit_header {
unsigned char h_chksum_size;
unsigned char h_padding[2];
__be32 h_chksum[JBD2_CHECKSUM_BYTES];
+ __be64 h_commit_sec;
+ __be32 h_commit_nsec;
};
/*
@@ -379,6 +381,38 @@ static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
bit_spin_unlock(BH_JournalHead, &bh->b_state);
}
+/* Flags in jbd_inode->i_flags */
+#define __JI_COMMIT_RUNNING 0
+/* Commit of the inode data in progress. We use this flag to protect us from
+ * concurrent deletion of inode. We cannot use reference to inode for this
+ * since we cannot afford doing last iput() on behalf of kjournald
+ */
+#define JI_COMMIT_RUNNING (1 << __JI_COMMIT_RUNNING)
+
+/**
+ * struct jbd_inode is the structure linking inodes in ordered mode
+ * present in a transaction so that we can sync them during commit.
+ */
+struct jbd2_inode {
+ /* Which transaction does this inode belong to? Either the running
+ * transaction or the committing one. [j_list_lock] */
+ transaction_t *i_transaction;
+
+ /* Pointer to the running transaction modifying inode's data in case
+ * there is already a committing transaction touching it. [j_list_lock] */
+ transaction_t *i_next_transaction;
+
+ /* List of inodes in the i_transaction [j_list_lock] */
+ struct list_head i_list;
+
+ /* VFS inode this inode belongs to [constant during the lifetime
+ * of the structure] */
+ struct inode *i_vfs_inode;
+
+ /* Flags of inode [j_list_lock] */
+ unsigned int i_flags;
+};
+
struct jbd2_revoke_table_s;
/**
@@ -509,24 +543,12 @@ struct transaction_s
struct journal_head *t_reserved_list;
/*
- * Doubly-linked circular list of all buffers under writeout during
- * commit [j_list_lock]
- */
- struct journal_head *t_locked_list;
-
- /*
* Doubly-linked circular list of all metadata buffers owned by this
* transaction [j_list_lock]
*/
struct journal_head *t_buffers;
/*
- * Doubly-linked circular list of all data buffers still to be
- * flushed before this transaction can be committed [j_list_lock]
- */
- struct journal_head *t_sync_datalist;
-
- /*
* Doubly-linked circular list of all forget buffers (superseded
* buffers which we can un-checkpoint once this transaction commits)
* [j_list_lock]
@@ -565,6 +587,12 @@ struct transaction_s
struct journal_head *t_log_list;
/*
+ * List of inodes whose data we've modified in data=ordered mode.
+ * [j_list_lock]
+ */
+ struct list_head t_inode_list;
+
+ /*
* Protects info related to handles
*/
spinlock_t t_handle_lock;
@@ -1004,7 +1032,6 @@ extern int jbd2_journal_extend (handle_t *, int nblocks);
extern int jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
extern int jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
extern int jbd2_journal_get_undo_access(handle_t *, struct buffer_head *);
-extern int jbd2_journal_dirty_data (handle_t *, struct buffer_head *);
extern int jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *);
extern void jbd2_journal_release_buffer (handle_t *, struct buffer_head *);
extern int jbd2_journal_forget (handle_t *, struct buffer_head *);
@@ -1044,6 +1071,10 @@ extern void jbd2_journal_ack_err (journal_t *);
extern int jbd2_journal_clear_err (journal_t *);
extern int jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
extern int jbd2_journal_force_commit(journal_t *);
+extern int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
+extern int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode, loff_t new_size);
+extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
+extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
/*
* journal_head management
@@ -1179,15 +1210,13 @@ static inline int jbd_space_needed(journal_t *journal)
/* journaling buffer types */
#define BJ_None 0 /* Not journaled */
-#define BJ_SyncData 1 /* Normal data: flush before commit */
-#define BJ_Metadata 2 /* Normal journaled metadata */
-#define BJ_Forget 3 /* Buffer superseded by this transaction */
-#define BJ_IO 4 /* Buffer is for temporary IO use */
-#define BJ_Shadow 5 /* Buffer contents being shadowed to the log */
-#define BJ_LogCtl 6 /* Buffer contains log descriptors */
-#define BJ_Reserved 7 /* Buffer is reserved for access by journal */
-#define BJ_Locked 8 /* Locked for I/O during commit */
-#define BJ_Types 9
+#define BJ_Metadata 1 /* Normal journaled metadata */
+#define BJ_Forget 2 /* Buffer superseded by this transaction */
+#define BJ_IO 3 /* Buffer is for temporary IO use */
+#define BJ_Shadow 4 /* Buffer contents being shadowed to the log */
+#define BJ_LogCtl 5 /* Buffer contains log descriptors */
+#define BJ_Reserved 6 /* Buffer is reserved for access by journal */
+#define BJ_Types 7
extern int jbd_blocks_per_page(struct inode *inode);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 792bf0aa779..f9cd7a513f9 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -46,6 +46,9 @@ extern const char linux_proc_banner[];
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define _RET_IP_ (unsigned long)__builtin_return_address(0)
+#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
+
#ifdef CONFIG_LBD
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
@@ -184,9 +187,6 @@ asmlinkage int vprintk(const char *fmt, va_list args)
__attribute__ ((format (printf, 1, 0)));
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
-extern int log_buf_get_len(void);
-extern int log_buf_read(int idx);
-extern int log_buf_copy(char *dest, int idx, int len);
extern int printk_ratelimit_jiffies;
extern int printk_ratelimit_burst;
@@ -202,9 +202,6 @@ static inline int vprintk(const char *s, va_list args) { return 0; }
static inline int printk(const char *s, ...)
__attribute__ ((format (printf, 1, 2)));
static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int log_buf_get_len(void) { return 0; }
-static inline int log_buf_read(int idx) { return 0; }
-static inline int log_buf_copy(char *dest, int idx, int len) { return 0; }
static inline int printk_ratelimit(void) { return 0; }
static inline int __printk_ratelimit(int ratelimit_jiffies, \
int ratelimit_burst) { return 0; }
@@ -213,7 +210,7 @@ static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
{ return false; }
#endif
-extern void __attribute__((format(printf, 1, 2)))
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
early_printk(const char *fmt, ...);
unsigned long int_sqrt(unsigned long);
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index e8ffce898bf..cf9f40a91c9 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -1,11 +1,11 @@
#ifndef _LINUX_KERNEL_STAT_H
#define _LINUX_KERNEL_STAT_H
-#include <asm/irq.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/percpu.h>
#include <linux/cpumask.h>
+#include <asm/irq.h>
#include <asm/cputime.h>
/*
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 1036631ff4f..04a3556bdea 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -259,6 +259,10 @@ void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head);
struct jprobe;
struct kretprobe;
+static inline struct kprobe *get_kprobe(void *addr)
+{
+ return NULL;
+}
static inline struct kprobe *kprobe_running(void)
{
return NULL;
diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h
index a2c54acceb4..cb311798e0b 100644
--- a/include/linux/ks0108.h
+++ b/include/linux/ks0108.h
@@ -4,7 +4,7 @@
* Description: ks0108 LCD Controller driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e57e5d08312..5b247b8a6b3 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -27,6 +27,7 @@
#define __LINUX_LIBATA_H__
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
@@ -115,7 +116,7 @@ enum {
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_SHORT_PAUSE = (HZ >> 6) + 1,
+ ATA_SHORT_PAUSE = 16,
ATAPI_MAX_DRAIN = 16 << 10,
@@ -168,6 +169,7 @@ enum {
ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */
ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */
+ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
@@ -190,6 +192,10 @@ enum {
ATA_FLAG_AN = (1 << 18), /* controller supports AN */
ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */
ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */
+ ATA_FLAG_EM = (1 << 21), /* driver supports enclosure
+ * management */
+ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity
+ * led */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
@@ -234,17 +240,16 @@ enum {
/* bits 24:31 of host->flags are reserved for LLD specific flags */
/* various lengths of time */
- ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
- ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
- ATA_TMOUT_INTERNAL = 30 * HZ,
- ATA_TMOUT_INTERNAL_QUICK = 5 * HZ,
+ ATA_TMOUT_BOOT = 30000, /* heuristic */
+ ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */
+ ATA_TMOUT_INTERNAL_QUICK = 5000,
/* FIXME: GoVault needs 2s but we can't afford that without
* parallel probing. 800ms is enough for iVDR disk
* HHD424020F7SV00. Increase to 2secs when parallel probing
* is in place.
*/
- ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
+ ATA_TMOUT_FF_WAIT = 800,
/* Spec mandates to wait for ">= 2ms" before checking status
* after reset. We wait 150ms, because that was the magic
@@ -256,14 +261,14 @@ enum {
*
* Old drivers/ide uses the 2mS rule and then waits for ready.
*/
- ATA_WAIT_AFTER_RESET_MSECS = 150,
+ ATA_WAIT_AFTER_RESET = 150,
/* If PMP is supported, we have to do follow-up SRST. As some
* PMPs don't send D2H Reg FIS after hardreset, LLDs are
* advised to wait only for the following duration before
* doing SRST.
*/
- ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ,
+ ATA_TMOUT_PMP_SRST_WAIT = 1000,
/* ATA bus states */
BUS_UNKNOWN = 0,
@@ -340,6 +345,11 @@ enum {
SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */
+ /* This should match the actual table size of
+ * ata_eh_cmd_timeout_table in libata-eh.c.
+ */
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5,
+
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
@@ -441,6 +451,15 @@ enum link_pm {
MEDIUM_POWER,
};
extern struct device_attribute dev_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_em_message_type;
+extern struct device_attribute dev_attr_em_message;
+extern struct device_attribute dev_attr_sw_activity;
+
+enum sw_activity {
+ OFF,
+ BLINK_ON,
+ BLINK_OFF,
+};
#ifdef CONFIG_ATA_SFF
struct ata_ioports {
@@ -597,10 +616,14 @@ struct ata_eh_info {
struct ata_eh_context {
struct ata_eh_info i;
int tries[ATA_MAX_DEVICES];
+ int cmd_timeout_idx[ATA_MAX_DEVICES]
+ [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
unsigned int classes[ATA_MAX_DEVICES];
unsigned int did_probe_mask;
unsigned int saved_ncq_enabled;
u8 saved_xfer_mode[ATA_MAX_DEVICES];
+ /* timestamp for the last reset attempt or success */
+ unsigned long last_reset;
};
struct ata_acpi_drive
@@ -692,6 +715,7 @@ struct ata_port {
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
+ int em_message_type;
void *private_data;
#ifdef CONFIG_ATA_ACPI
@@ -783,6 +807,12 @@ struct ata_port_operations {
u8 (*bmdma_status)(struct ata_port *ap);
#endif /* CONFIG_ATA_SFF */
+ ssize_t (*em_show)(struct ata_port *ap, char *buf);
+ ssize_t (*em_store)(struct ata_port *ap, const char *message,
+ size_t size);
+ ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
+ ssize_t (*sw_activity_store)(struct ata_device *dev,
+ enum sw_activity val);
/*
* Obsolete
*/
@@ -895,8 +925,7 @@ extern void ata_host_resume(struct ata_host *host);
#endif
extern int ata_ratelimit(void);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
- unsigned long interval_msec,
- unsigned long timeout_msec);
+ unsigned long interval, unsigned long timeout);
extern int atapi_cmd_type(u8 opcode);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
@@ -1389,6 +1418,12 @@ static inline int ata_check_ready(u8 status)
return 0;
}
+static inline unsigned long ata_deadline(unsigned long from_jiffies,
+ unsigned long timeout_msecs)
+{
+ return from_jiffies + msecs_to_jiffies(timeout_msecs);
+}
+
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 2119610b24f..56ba3739465 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -1,8 +1,11 @@
#ifndef _LINUX_LINKAGE_H
#define _LINUX_LINKAGE_H
+#include <linux/compiler.h>
#include <asm/linkage.h>
+#define notrace __attribute__((no_instrument_function))
+
#ifdef __cplusplus
#define CPP_ASMLINKAGE extern "C"
#else
@@ -17,6 +20,9 @@
# define asmregparm
#endif
+#define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE)
+
/*
* This is used by architectures to keep arguments on the stack
* untouched by the compiler by keeping them live until the end.
diff --git a/include/linux/list.h b/include/linux/list.h
index 08cf4f65188..139ec41d9c2 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -85,65 +85,6 @@ static inline void list_add_tail(struct list_head *new, struct list_head *head)
}
/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add_rcu(struct list_head * new,
- struct list_head * prev, struct list_head * next)
-{
- new->next = next;
- new->prev = prev;
- smp_wmb();
- next->prev = new;
- prev->next = new;
-}
-
-/**
- * list_add_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_rcu(struct list_head *new, struct list_head *head)
-{
- __list_add_rcu(new, head, head->next);
-}
-
-/**
- * list_add_tail_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_tail_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_tail_rcu(struct list_head *new,
- struct list_head *head)
-{
- __list_add_rcu(new, head->prev, head);
-}
-
-/*
* Delete a list entry by making the prev/next entries
* point to each other.
*
@@ -174,36 +115,6 @@ extern void list_del(struct list_head *entry);
#endif
/**
- * list_del_rcu - deletes entry from list without re-initialization
- * @entry: the element to delete from the list.
- *
- * Note: list_empty() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_del_rcu()
- * or list_add_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- *
- * Note that the caller is not permitted to immediately free
- * the newly deleted entry. Instead, either synchronize_rcu()
- * or call_rcu() must be used to defer freeing until an RCU
- * grace period has elapsed.
- */
-static inline void list_del_rcu(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- entry->prev = LIST_POISON2;
-}
-
-/**
* list_replace - replace old entry by new one
* @old : the element to be replaced
* @new : the new element to insert
@@ -227,25 +138,6 @@ static inline void list_replace_init(struct list_head *old,
}
/**
- * list_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- * Note: @old should not be empty.
- */
-static inline void list_replace_rcu(struct list_head *old,
- struct list_head *new)
-{
- new->next = old->next;
- new->prev = old->prev;
- smp_wmb();
- new->next->prev = new;
- new->prev->next = new;
- old->prev = LIST_POISON2;
-}
-
-/**
* list_del_init - deletes entry from list and reinitialize it.
* @entry: the element to delete from the list.
*/
@@ -369,62 +261,6 @@ static inline void list_splice_init(struct list_head *list,
}
/**
- * list_splice_init_rcu - splice an RCU-protected list into an existing list.
- * @list: the RCU-protected list to splice
- * @head: the place in the list to splice the first list into
- * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
- *
- * @head can be RCU-read traversed concurrently with this function.
- *
- * Note that this function blocks.
- *
- * Important note: the caller must take whatever action is necessary to
- * prevent any other updates to @head. In principle, it is possible
- * to modify the list as soon as sync() begins execution.
- * If this sort of thing becomes necessary, an alternative version
- * based on call_rcu() could be created. But only if -really-
- * needed -- there is no shortage of RCU API members.
- */
-static inline void list_splice_init_rcu(struct list_head *list,
- struct list_head *head,
- void (*sync)(void))
-{
- struct list_head *first = list->next;
- struct list_head *last = list->prev;
- struct list_head *at = head->next;
-
- if (list_empty(head))
- return;
-
- /* "first" and "last" tracking list, so initialize it. */
-
- INIT_LIST_HEAD(list);
-
- /*
- * At this point, the list body still points to the source list.
- * Wait for any readers to finish using the list before splicing
- * the list body into the new list. Any new readers will see
- * an empty list.
- */
-
- sync();
-
- /*
- * Readers are finished with the source list, so perform splice.
- * The order is important if the new list is global and accessible
- * to concurrent RCU readers. Note that RCU readers are not
- * permitted to traverse the prev pointers without excluding
- * this function.
- */
-
- last->next = at;
- smp_wmb();
- head->next = first;
- first->prev = head;
- at->prev = last;
-}
-
-/**
* list_entry - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
@@ -629,57 +465,6 @@ static inline void list_splice_init_rcu(struct list_head *list,
&pos->member != (head); \
pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-/**
- * list_for_each_rcu - iterate over an rcu-protected list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_rcu(pos, head) \
- for (pos = rcu_dereference((head)->next); \
- prefetch(pos->next), pos != (head); \
- pos = rcu_dereference(pos->next))
-
-#define __list_for_each_rcu(pos, head) \
- for (pos = rcu_dereference((head)->next); \
- pos != (head); \
- pos = rcu_dereference(pos->next))
-
-/**
- * list_for_each_entry_rcu - iterate over rcu list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_entry_rcu(pos, head, member) \
- for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \
- prefetch(pos->member.next), &pos->member != (head); \
- pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member))
-
-
-/**
- * list_for_each_continue_rcu
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- *
- * Iterate over an rcu-protected list, continuing after current point.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_continue_rcu(pos, head) \
- for ((pos) = rcu_dereference((pos)->next); \
- prefetch((pos)->next), (pos) != (head); \
- (pos) = rcu_dereference((pos)->next))
-
/*
* Double linked lists with a single pointer list head.
* Mostly useful for hash tables where the two pointer list head is
@@ -730,31 +515,6 @@ static inline void hlist_del(struct hlist_node *n)
n->pprev = LIST_POISON2;
}
-/**
- * hlist_del_rcu - deletes entry from hash list without re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: list_unhashed() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the hash list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry().
- */
-static inline void hlist_del_rcu(struct hlist_node *n)
-{
- __hlist_del(n);
- n->pprev = LIST_POISON2;
-}
-
static inline void hlist_del_init(struct hlist_node *n)
{
if (!hlist_unhashed(n)) {
@@ -763,27 +523,6 @@ static inline void hlist_del_init(struct hlist_node *n)
}
}
-/**
- * hlist_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- */
-static inline void hlist_replace_rcu(struct hlist_node *old,
- struct hlist_node *new)
-{
- struct hlist_node *next = old->next;
-
- new->next = next;
- new->pprev = old->pprev;
- smp_wmb();
- if (next)
- new->next->pprev = &new->next;
- *new->pprev = new;
- old->pprev = LIST_POISON2;
-}
-
static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
{
struct hlist_node *first = h->first;
@@ -794,38 +533,6 @@ static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
n->pprev = &h->first;
}
-
-/**
- * hlist_add_head_rcu
- * @n: the element to add to the hash list.
- * @h: the list to add to.
- *
- * Description:
- * Adds the specified element to the specified hlist,
- * while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs. Regardless of the type of CPU, the
- * list-traversal primitive must be guarded by rcu_read_lock().
- */
-static inline void hlist_add_head_rcu(struct hlist_node *n,
- struct hlist_head *h)
-{
- struct hlist_node *first = h->first;
- n->next = first;
- n->pprev = &h->first;
- smp_wmb();
- if (first)
- first->pprev = &n->next;
- h->first = n;
-}
-
/* next must be != NULL */
static inline void hlist_add_before(struct hlist_node *n,
struct hlist_node *next)
@@ -847,63 +554,6 @@ static inline void hlist_add_after(struct hlist_node *n,
next->next->pprev = &next->next;
}
-/**
- * hlist_add_before_rcu
- * @n: the new element to add to the hash list.
- * @next: the existing element to add the new element before.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * before the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_before_rcu(struct hlist_node *n,
- struct hlist_node *next)
-{
- n->pprev = next->pprev;
- n->next = next;
- smp_wmb();
- next->pprev = &n->next;
- *(n->pprev) = n;
-}
-
-/**
- * hlist_add_after_rcu
- * @prev: the existing element to add the new element after.
- * @n: the new element to add to the hash list.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * after the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_after_rcu(struct hlist_node *prev,
- struct hlist_node *n)
-{
- n->next = prev->next;
- n->pprev = &prev->next;
- smp_wmb();
- prev->next = n;
- if (n->next)
- n->next->pprev = &n->next;
-}
-
#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
#define hlist_for_each(pos, head) \
@@ -964,21 +614,4 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
pos = n)
-/**
- * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as hlist_add_head_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define hlist_for_each_entry_rcu(tpos, pos, head, member) \
- for (pos = rcu_dereference((head)->first); \
- pos && ({ prefetch(pos->next); 1;}) && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = rcu_dereference(pos->next))
-
#endif
diff --git a/include/linux/lm_interface.h b/include/linux/lm_interface.h
index f274997bc28..2ed8fa1b762 100644
--- a/include/linux/lm_interface.h
+++ b/include/linux/lm_interface.h
@@ -122,11 +122,9 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data);
*/
#define LM_OUT_ST_MASK 0x00000003
-#define LM_OUT_CACHEABLE 0x00000004
#define LM_OUT_CANCELED 0x00000008
#define LM_OUT_ASYNC 0x00000080
#define LM_OUT_ERROR 0x00000100
-#define LM_OUT_CONV_DEADLK 0x00000200
/*
* lm_callback_t types
@@ -138,9 +136,6 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data);
* LM_CB_NEED_RECOVERY
* The given journal needs to be recovered.
*
- * LM_CB_DROPLOCKS
- * Reduce the number of cached locks.
- *
* LM_CB_ASYNC
* The given lock has been granted.
*/
@@ -149,7 +144,6 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data);
#define LM_CB_NEED_D 258
#define LM_CB_NEED_S 259
#define LM_CB_NEED_RECOVERY 260
-#define LM_CB_DROPLOCKS 261
#define LM_CB_ASYNC 262
/*
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 4c4d236ded1..2486eb4edbf 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -182,6 +182,9 @@ struct lock_list {
* We record lock dependency chains, so that we can cache them:
*/
struct lock_chain {
+ u8 irq_context;
+ u8 depth;
+ u16 base;
struct list_head entry;
u64 chain_key;
};
@@ -276,14 +279,6 @@ extern void lockdep_init_map(struct lockdep_map *lock, const char *name,
(lock)->dep_map.key, sub)
/*
- * To initialize a lockdep_map statically use this macro.
- * Note that _name must not be NULL.
- */
-#define STATIC_LOCKDEP_MAP_INIT(_name, _key) \
- { .name = (_name), .key = (void *)(_key), }
-
-
-/*
* Acquire a lock.
*
* Values for "read":
diff --git a/include/linux/marker.h b/include/linux/marker.h
index 430f6adf976..1290653f924 100644
--- a/include/linux/marker.h
+++ b/include/linux/marker.h
@@ -44,8 +44,8 @@ struct marker {
*/
char state; /* Marker state. */
char ptype; /* probe type : 0 : single, 1 : multi */
- void (*call)(const struct marker *mdata, /* Probe wrapper */
- void *call_private, const char *fmt, ...);
+ /* Probe wrapper */
+ void (*call)(const struct marker *mdata, void *call_private, ...);
struct marker_probe_closure single;
struct marker_probe_closure *multi;
} __attribute__((aligned(8)));
@@ -58,8 +58,12 @@ struct marker {
* Make sure the alignment of the structure in the __markers section will
* not add unwanted padding between the beginning of the section and the
* structure. Force alignment to the same alignment as the section start.
+ *
+ * The "generic" argument controls which marker enabling mechanism must be used.
+ * If generic is true, a variable read is used.
+ * If generic is false, immediate values are used.
*/
-#define __trace_mark(name, call_private, format, args...) \
+#define __trace_mark(generic, name, call_private, format, args...) \
do { \
static const char __mstrtab_##name[] \
__attribute__((section("__markers_strings"))) \
@@ -72,15 +76,14 @@ struct marker {
__mark_check_format(format, ## args); \
if (unlikely(__mark_##name.state)) { \
(*__mark_##name.call) \
- (&__mark_##name, call_private, \
- format, ## args); \
+ (&__mark_##name, call_private, ## args);\
} \
} while (0)
extern void marker_update_probe_range(struct marker *begin,
struct marker *end);
#else /* !CONFIG_MARKERS */
-#define __trace_mark(name, call_private, format, args...) \
+#define __trace_mark(generic, name, call_private, format, args...) \
__mark_check_format(format, ## args)
static inline void marker_update_probe_range(struct marker *begin,
struct marker *end)
@@ -88,15 +91,30 @@ static inline void marker_update_probe_range(struct marker *begin,
#endif /* CONFIG_MARKERS */
/**
- * trace_mark - Marker
+ * trace_mark - Marker using code patching
* @name: marker name, not quoted.
* @format: format string
* @args...: variable argument list
*
- * Places a marker.
+ * Places a marker using optimized code patching technique (imv_read())
+ * to be enabled when immediate values are present.
*/
#define trace_mark(name, format, args...) \
- __trace_mark(name, NULL, format, ## args)
+ __trace_mark(0, name, NULL, format, ## args)
+
+/**
+ * _trace_mark - Marker using variable read
+ * @name: marker name, not quoted.
+ * @format: format string
+ * @args...: variable argument list
+ *
+ * Places a marker using a standard memory read (_imv_read()) to be
+ * enabled. Should be used for markers in code paths where instruction
+ * modification based enabling is not welcome. (__init and __exit functions,
+ * lockdep, some traps, printk).
+ */
+#define _trace_mark(name, format, args...) \
+ __trace_mark(1, name, NULL, format, ## args)
/**
* MARK_NOARGS - Format string for a marker with no argument.
@@ -117,9 +135,9 @@ static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...)
extern marker_probe_func __mark_empty_function;
extern void marker_probe_cb(const struct marker *mdata,
- void *call_private, const char *fmt, ...);
+ void *call_private, ...);
extern void marker_probe_cb_noarg(const struct marker *mdata,
- void *call_private, const char *fmt, ...);
+ void *call_private, ...);
/*
* Connect a probe to a marker.
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index a744383d16e..81b3dd5206e 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -398,7 +398,8 @@ int mlx4_srq_query(struct mlx4_dev *dev, struct mlx4_srq *srq, int *limit_waterm
int mlx4_INIT_PORT(struct mlx4_dev *dev, int port);
int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port);
-int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]);
+int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
+ int block_mcast_loopback);
int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]);
int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 586a943cab0..2128ef7780c 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -108,6 +108,7 @@ extern unsigned int kobjsize(const void *objp);
#define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */
#define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */
+#define VM_SAO 0x20000000 /* Strong Access Ordering (powerpc) */
#ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */
#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
@@ -998,8 +999,8 @@ extern void free_area_init_node(int nid, pg_data_t *pgdat,
extern void free_area_init_nodes(unsigned long *max_zone_pfn);
extern void add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
-extern void shrink_active_range(unsigned int nid, unsigned long old_end_pfn,
- unsigned long new_end_pfn);
+extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
extern void remove_all_active_ranges(void);
@@ -1011,6 +1012,8 @@ extern unsigned long find_min_pfn_with_active_regions(void);
extern unsigned long find_max_pfn_with_active_regions(void);
extern void free_bootmem_with_active_regions(int nid,
unsigned long max_low_pfn);
+typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
+extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data);
extern void sparse_memory_present_with_active_regions(int nid);
#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
extern int early_pfn_to_nid(unsigned long pfn);
@@ -1024,6 +1027,7 @@ extern void mem_init(void);
extern void show_mem(void);
extern void si_meminfo(struct sysinfo * val);
extern void si_meminfo_node(struct sysinfo *val, int nid);
+extern int after_bootmem;
#ifdef CONFIG_NUMA
extern void setup_per_cpu_pageset(void);
diff --git a/include/linux/mman.h b/include/linux/mman.h
index dab8892e6ff..30d1073bac3 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -34,6 +34,32 @@ static inline void vm_unacct_memory(long pages)
}
/*
+ * Allow architectures to handle additional protection bits
+ */
+
+#ifndef arch_calc_vm_prot_bits
+#define arch_calc_vm_prot_bits(prot) 0
+#endif
+
+#ifndef arch_vm_get_page_prot
+#define arch_vm_get_page_prot(vm_flags) __pgprot(0)
+#endif
+
+#ifndef arch_validate_prot
+/*
+ * This is called from mprotect(). PROT_GROWSDOWN and PROT_GROWSUP have
+ * already been masked out.
+ *
+ * Returns true if the prot flags are valid
+ */
+static inline int arch_validate_prot(unsigned long prot)
+{
+ return (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM)) == 0;
+}
+#define arch_validate_prot arch_validate_prot
+#endif
+
+/*
* Optimisation macro. It is equivalent to:
* (x & bit1) ? bit2 : 0
* but this version is faster.
@@ -51,7 +77,8 @@ calc_vm_prot_bits(unsigned long prot)
{
return _calc_vm_trans(prot, PROT_READ, VM_READ ) |
_calc_vm_trans(prot, PROT_WRITE, VM_WRITE) |
- _calc_vm_trans(prot, PROT_EXEC, VM_EXEC );
+ _calc_vm_trans(prot, PROT_EXEC, VM_EXEC) |
+ arch_calc_vm_prot_bits(prot);
}
/*
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index d0c3abed74c..143cebf0586 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -135,6 +135,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
extern void mmc_release_host(struct mmc_host *host);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7ab962fa1d7..10a2080086c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -51,8 +51,30 @@ struct mmc_ios {
struct mmc_host_ops {
void (*request)(struct mmc_host *host, struct mmc_request *req);
+ /*
+ * Avoid calling these three functions too often or in a "fast path",
+ * since underlaying controller might implement them in an expensive
+ * and/or slow way.
+ *
+ * Also note that these functions might sleep, so don't call them
+ * in the atomic contexts!
+ *
+ * Return values for the get_ro callback should be:
+ * 0 for a read/write card
+ * 1 for a read-only card
+ * -ENOSYS when not supported (equal to NULL callback)
+ * or a negative errno value when something bad happened
+ *
+ * Return values for the get_ro callback should be:
+ * 0 for a absent card
+ * 1 for a present card
+ * -ENOSYS when not supported (equal to NULL callback)
+ * or a negative errno value when something bad happened
+ */
void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
int (*get_ro)(struct mmc_host *host);
+ int (*get_cd)(struct mmc_host *host);
+
void (*enable_sdio_irq)(struct mmc_host *host, int enable);
};
@@ -89,11 +111,11 @@ struct mmc_host {
unsigned long caps; /* Host capabilities */
#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
-#define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */
-#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */
-#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */
-#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */
+#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 4236fbf0b6f..14b81f3e523 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -16,7 +16,6 @@
* Based strongly on code by:
*
* Author: Yong-iL Joh <tolkien@mizi.com>
- * Date : $Date: 2002/06/18 12:37:30 $
*
* Author: Andrew Christian
* 15 May 2002
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index b050f4d7b41..07bee4a0d45 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -1,7 +1,7 @@
/*
* include/linux/mmc/sdio_func.h
*
- * Copyright 2007 Pierre Ossman
+ * Copyright 2007-2008 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -46,6 +46,8 @@ struct sdio_func {
unsigned max_blksize; /* maximum block size */
unsigned cur_blksize; /* current block size */
+ unsigned enable_timeout; /* max enable timeout in msec */
+
unsigned int state; /* function state */
#define SDIO_STATE_PRESENT (1<<0) /* present in sysfs */
@@ -120,23 +122,22 @@ extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
extern int sdio_release_irq(struct sdio_func *func);
-extern unsigned char sdio_readb(struct sdio_func *func,
- unsigned int addr, int *err_ret);
-extern unsigned short sdio_readw(struct sdio_func *func,
- unsigned int addr, int *err_ret);
-extern unsigned long sdio_readl(struct sdio_func *func,
- unsigned int addr, int *err_ret);
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+
+extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
unsigned int addr, int count);
extern int sdio_readsb(struct sdio_func *func, void *dst,
unsigned int addr, int count);
-extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+extern void sdio_writeb(struct sdio_func *func, u8 b,
unsigned int addr, int *err_ret);
-extern void sdio_writew(struct sdio_func *func, unsigned short b,
+extern void sdio_writew(struct sdio_func *func, u16 b,
unsigned int addr, int *err_ret);
-extern void sdio_writel(struct sdio_func *func, unsigned long b,
+extern void sdio_writel(struct sdio_func *func, u32 b,
unsigned int addr, int *err_ret);
extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h
new file mode 100644
index 00000000000..61d19e1b7a0
--- /dev/null
+++ b/include/linux/mmiotrace.h
@@ -0,0 +1,85 @@
+#ifndef MMIOTRACE_H
+#define MMIOTRACE_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+struct kmmio_probe;
+struct pt_regs;
+
+typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *,
+ struct pt_regs *, unsigned long addr);
+typedef void (*kmmio_post_handler_t)(struct kmmio_probe *,
+ unsigned long condition, struct pt_regs *);
+
+struct kmmio_probe {
+ struct list_head list; /* kmmio internal list */
+ unsigned long addr; /* start location of the probe point */
+ unsigned long len; /* length of the probe region */
+ kmmio_pre_handler_t pre_handler; /* Called before addr is executed. */
+ kmmio_post_handler_t post_handler; /* Called after addr is executed */
+ void *private;
+};
+
+/* kmmio is active by some kmmio_probes? */
+static inline int is_kmmio_active(void)
+{
+ extern unsigned int kmmio_count;
+ return kmmio_count;
+}
+
+extern int register_kmmio_probe(struct kmmio_probe *p);
+extern void unregister_kmmio_probe(struct kmmio_probe *p);
+
+/* Called from page fault handler. */
+extern int kmmio_handler(struct pt_regs *regs, unsigned long addr);
+
+/* Called from ioremap.c */
+#ifdef CONFIG_MMIOTRACE
+extern void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
+ void __iomem *addr);
+extern void mmiotrace_iounmap(volatile void __iomem *addr);
+#else
+static inline void mmiotrace_ioremap(resource_size_t offset,
+ unsigned long size, void __iomem *addr)
+{
+}
+
+static inline void mmiotrace_iounmap(volatile void __iomem *addr)
+{
+}
+#endif /* CONFIG_MMIOTRACE_HOOKS */
+
+enum mm_io_opcode {
+ MMIO_READ = 0x1, /* struct mmiotrace_rw */
+ MMIO_WRITE = 0x2, /* struct mmiotrace_rw */
+ MMIO_PROBE = 0x3, /* struct mmiotrace_map */
+ MMIO_UNPROBE = 0x4, /* struct mmiotrace_map */
+ MMIO_MARKER = 0x5, /* raw char data */
+ MMIO_UNKNOWN_OP = 0x6, /* struct mmiotrace_rw */
+};
+
+struct mmiotrace_rw {
+ resource_size_t phys; /* PCI address of register */
+ unsigned long value;
+ unsigned long pc; /* optional program counter */
+ int map_id;
+ unsigned char opcode; /* one of MMIO_{READ,WRITE,UNKNOWN_OP} */
+ unsigned char width; /* size of register access in bytes */
+};
+
+struct mmiotrace_map {
+ resource_size_t phys; /* base address in PCI space */
+ unsigned long virt; /* base virtual address */
+ unsigned long len; /* mapping size */
+ int map_id;
+ unsigned char opcode; /* MMIO_PROBE or MMIO_UNPROBE */
+};
+
+/* in kernel/trace/trace_mmiotrace.c */
+extern void enable_mmiotrace(void);
+extern void disable_mmiotrace(void);
+extern void mmio_trace_rw(struct mmiotrace_rw *rw);
+extern void mmio_trace_mapping(struct mmiotrace_map *map);
+
+#endif /* MMIOTRACE_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 69b2342d5eb..c4db5827963 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -159,6 +159,15 @@ struct ap_device_id {
#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
+/* s390 css bus devices (subchannels) */
+struct css_device_id {
+ __u8 match_flags;
+ __u8 type; /* subchannel type */
+ __u16 pad2;
+ __u32 pad3;
+ kernel_ulong_t driver_data;
+};
+
#define ACPI_ID_LEN 16 /* only 9 bytes needed here, 16 bytes are used */
/* to workaround crosscompile issues */
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
index 068a0c9946a..5c42821da2d 100644
--- a/include/linux/mpage.h
+++ b/include/linux/mpage.h
@@ -11,11 +11,21 @@
*/
#ifdef CONFIG_BLOCK
+struct mpage_data {
+ struct bio *bio;
+ sector_t last_block_in_bio;
+ get_block_t *get_block;
+ unsigned use_writepage;
+};
+
struct writeback_control;
+struct bio *mpage_bio_submit(int rw, struct bio *bio);
int mpage_readpages(struct address_space *mapping, struct list_head *pages,
unsigned nr_pages, get_block_t get_block);
int mpage_readpage(struct page *page, get_block_t get_block);
+int __mpage_writepage(struct page *page, struct writeback_control *wbc,
+ void *data);
int mpage_writepages(struct address_space *mapping,
struct writeback_control *wbc, get_block_t get_block);
int mpage_writepage(struct page *page, get_block_t *get_block,
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 27d6a8d98ce..29d26191873 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -12,9 +12,19 @@
#include <linux/magic.h>
/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO (11)
+#define NFS_DEF_UDP_RETRANS (3)
+#define NFS_DEF_TCP_TIMEO (600)
+#define NFS_DEF_TCP_RETRANS (2)
+
#define NFS_MAX_UDP_TIMEOUT (60*HZ)
#define NFS_MAX_TCP_TIMEOUT (600*HZ)
+#define NFS_DEF_ACREGMIN (3)
+#define NFS_DEF_ACREGMAX (60)
+#define NFS_DEF_ACDIRMIN (30)
+#define NFS_DEF_ACDIRMAX (60)
+
/*
* When flushing a cluster of dirty pages, there can be different
* strategies:
diff --git a/include/linux/nfs_iostat.h b/include/linux/nfs_iostat.h
new file mode 100644
index 00000000000..1cb9a3fed2b
--- /dev/null
+++ b/include/linux/nfs_iostat.h
@@ -0,0 +1,119 @@
+/*
+ * User-space visible declarations for NFS client per-mount
+ * point statistics
+ *
+ * Copyright (C) 2005, 2006 Chuck Lever <cel@netapp.com>
+ *
+ * NFS client per-mount statistics provide information about the
+ * health of the NFS client and the health of each NFS mount point.
+ * Generally these are not for detailed problem diagnosis, but
+ * simply to indicate that there is a problem.
+ *
+ * These counters are not meant to be human-readable, but are meant
+ * to be integrated into system monitoring tools such as "sar" and
+ * "iostat". As such, the counters are sampled by the tools over
+ * time, and are never zeroed after a file system is mounted.
+ * Moving averages can be computed by the tools by taking the
+ * difference between two instantaneous samples and dividing that
+ * by the time between the samples.
+ */
+
+#ifndef _LINUX_NFS_IOSTAT
+#define _LINUX_NFS_IOSTAT
+
+#define NFS_IOSTAT_VERS "1.0"
+
+/*
+ * NFS byte counters
+ *
+ * 1. SERVER - the number of payload bytes read from or written
+ * to the server by the NFS client via an NFS READ or WRITE
+ * request.
+ *
+ * 2. NORMAL - the number of bytes read or written by applications
+ * via the read(2) and write(2) system call interfaces.
+ *
+ * 3. DIRECT - the number of bytes read or written from files
+ * opened with the O_DIRECT flag.
+ *
+ * These counters give a view of the data throughput into and out
+ * of the NFS client. Comparing the number of bytes requested by
+ * an application with the number of bytes the client requests from
+ * the server can provide an indication of client efficiency
+ * (per-op, cache hits, etc).
+ *
+ * These counters can also help characterize which access methods
+ * are in use. DIRECT by itself shows whether there is any O_DIRECT
+ * traffic. NORMAL + DIRECT shows how much data is going through
+ * the system call interface. A large amount of SERVER traffic
+ * without much NORMAL or DIRECT traffic shows that applications
+ * are using mapped files.
+ *
+ * NFS page counters
+ *
+ * These count the number of pages read or written via nfs_readpage(),
+ * nfs_readpages(), or their write equivalents.
+ *
+ * NB: When adding new byte counters, please include the measured
+ * units in the name of each byte counter to help users of this
+ * interface determine what exactly is being counted.
+ */
+enum nfs_stat_bytecounters {
+ NFSIOS_NORMALREADBYTES = 0,
+ NFSIOS_NORMALWRITTENBYTES,
+ NFSIOS_DIRECTREADBYTES,
+ NFSIOS_DIRECTWRITTENBYTES,
+ NFSIOS_SERVERREADBYTES,
+ NFSIOS_SERVERWRITTENBYTES,
+ NFSIOS_READPAGES,
+ NFSIOS_WRITEPAGES,
+ __NFSIOS_BYTESMAX,
+};
+
+/*
+ * NFS event counters
+ *
+ * These counters provide a low-overhead way of monitoring client
+ * activity without enabling NFS trace debugging. The counters
+ * show the rate at which VFS requests are made, and how often the
+ * client invalidates its data and attribute caches. This allows
+ * system administrators to monitor such things as how close-to-open
+ * is working, and answer questions such as "why are there so many
+ * GETATTR requests on the wire?"
+ *
+ * They also count anamolous events such as short reads and writes,
+ * silly renames due to close-after-delete, and operations that
+ * change the size of a file (such operations can often be the
+ * source of data corruption if applications aren't using file
+ * locking properly).
+ */
+enum nfs_stat_eventcounters {
+ NFSIOS_INODEREVALIDATE = 0,
+ NFSIOS_DENTRYREVALIDATE,
+ NFSIOS_DATAINVALIDATE,
+ NFSIOS_ATTRINVALIDATE,
+ NFSIOS_VFSOPEN,
+ NFSIOS_VFSLOOKUP,
+ NFSIOS_VFSACCESS,
+ NFSIOS_VFSUPDATEPAGE,
+ NFSIOS_VFSREADPAGE,
+ NFSIOS_VFSREADPAGES,
+ NFSIOS_VFSWRITEPAGE,
+ NFSIOS_VFSWRITEPAGES,
+ NFSIOS_VFSGETDENTS,
+ NFSIOS_VFSSETATTR,
+ NFSIOS_VFSFLUSH,
+ NFSIOS_VFSFSYNC,
+ NFSIOS_VFSLOCK,
+ NFSIOS_VFSRELEASE,
+ NFSIOS_CONGESTIONWAIT,
+ NFSIOS_SETATTRTRUNC,
+ NFSIOS_EXTENDWRITE,
+ NFSIOS_SILLYRENAME,
+ NFSIOS_SHORTREAD,
+ NFSIOS_SHORTWRITE,
+ NFSIOS_DELAY,
+ __NFSIOS_COUNTSMAX,
+};
+
+#endif /* _LINUX_NFS_IOSTAT */
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index a1676e19e49..3c60685d972 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -27,9 +27,12 @@
/*
* Valid flags for a dirty buffer
*/
-#define PG_BUSY 0
-#define PG_NEED_COMMIT 1
-#define PG_NEED_RESCHED 2
+enum {
+ PG_BUSY = 0,
+ PG_CLEAN,
+ PG_NEED_COMMIT,
+ PG_NEED_RESCHED,
+};
struct nfs_inode;
struct nfs_page {
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 24263bb8e0b..8c77c11224d 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -829,9 +829,8 @@ struct nfs_rpc_ops {
int (*write_done) (struct rpc_task *, struct nfs_write_data *);
void (*commit_setup) (struct nfs_write_data *, struct rpc_message *);
int (*commit_done) (struct rpc_task *, struct nfs_write_data *);
- int (*file_open) (struct inode *, struct file *);
- int (*file_release) (struct inode *, struct file *);
int (*lock)(struct file *, int, struct file_lock *);
+ int (*lock_check_bounds)(const struct file_lock *);
void (*clear_acl_cache)(struct inode *);
};
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index afe338217d9..d3a74e00a3e 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -24,4 +24,7 @@ static inline void of_device_free(struct of_device *dev)
of_release_dev(&dev->dev);
}
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len);
+
#endif /* _LINUX_OF_DEVICE_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index f31debfac92..0d2a4e7012a 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -157,6 +157,7 @@ PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active)
__PAGEFLAG(Slab, slab)
PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */
PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */
+PAGEFLAG(SavePinned, dirty); /* Xen */
PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private)
__SETPAGEFLAG(Private, private)
diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h
index e875905f7b1..e8c06122be3 100644
--- a/include/linux/pageblock-flags.h
+++ b/include/linux/pageblock-flags.h
@@ -25,13 +25,11 @@
#include <linux/types.h>
-/* Macro to aid the definition of ranges of bits */
-#define PB_range(name, required_bits) \
- name, name ## _end = (name + required_bits) - 1
-
/* Bit indices that affect a whole block of pages */
enum pageblock_bits {
- PB_range(PB_migrate, 3), /* 3 bits required for migrate types */
+ PB_migrate,
+ PB_migrate_end = PB_migrate + 3 - 1,
+ /* 3 bits required for migrate types */
NR_PAGEBLOCK_BITS
};
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d18b1dd49fa..a6a088e1a80 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -17,8 +17,7 @@
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
-/* Include the pci register defines */
-#include <linux/pci_regs.h>
+#include <linux/pci_regs.h> /* The pci register defines */
/*
* The PCI interface treats multi-function devices as independent
@@ -49,12 +48,22 @@
#include <linux/list.h>
#include <linux/compiler.h>
#include <linux/errno.h>
+#include <linux/kobject.h>
#include <asm/atomic.h>
#include <linux/device.h>
/* Include the ID list */
#include <linux/pci_ids.h>
+/* pci_slot represents a physical slot */
+struct pci_slot {
+ struct pci_bus *bus; /* The bus this slot is on */
+ struct list_head list; /* node in list of slots on this bus */
+ struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */
+ unsigned char number; /* PCI_SLOT(pci_dev->devfn) */
+ struct kobject kobj;
+};
+
/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
pci_mmap_io,
@@ -142,6 +151,7 @@ struct pci_dev {
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+ struct pci_slot *slot; /* Physical slot this device is in */
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
@@ -167,6 +177,13 @@ struct pci_dev {
pci_power_t current_state; /* Current operating state. In ACPI-speak,
this is D0-D3, D0 being fully functional,
and D3 being off. */
+ int pm_cap; /* PM capability offset in the
+ configuration space */
+ unsigned int pme_support:5; /* Bitmask of states from which PME#
+ can be generated */
+ unsigned int d1_support:1; /* Low power state D1 is supported */
+ unsigned int d2_support:1; /* Low power state D2 is supported */
+ unsigned int no_d1d2:1; /* Only allow D0 and D3 */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
@@ -191,7 +208,6 @@ struct pci_dev {
unsigned int is_added:1;
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
- unsigned int no_d1d2:1; /* only allow d0 or d3 */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int msi_enabled:1;
@@ -267,6 +283,7 @@ struct pci_bus {
struct list_head children; /* list of child buses */
struct list_head devices; /* list of devices on this bus */
struct pci_dev *self; /* bridge device as seen by parent */
+ struct list_head slots; /* list of slots on this bus */
struct resource *resource[PCI_BUS_NUM_RESOURCES];
/* address space routed to this bus */
@@ -328,7 +345,7 @@ struct pci_bus_region {
struct pci_dynids {
spinlock_t lock; /* protects list, index */
struct list_head list; /* for IDs added at runtime */
- unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+ unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */
};
/* ---------------------------------------------------------------- */
@@ -390,7 +407,7 @@ struct pci_driver {
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
void (*shutdown) (struct pci_dev *dev);
-
+ struct pm_ext_ops *pm;
struct pci_error_handlers *err_handler;
struct device_driver driver;
struct pci_dynids dynids;
@@ -489,6 +506,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
int busnr);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+ const char *name);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
int pci_scan_slot(struct pci_bus *bus, int devfn);
struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -618,6 +639,8 @@ int pci_restore_state(struct pci_dev *dev);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
@@ -839,6 +862,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
}
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return -EIO;
+}
+
static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
unsigned int size)
{
@@ -977,9 +1005,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
/* If you want to know what to call your pci_dev, ask this function.
* Again, it's a wrapper around the generic device.
*/
-static inline char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(struct pci_dev *pdev)
{
- return pdev->dev.bus_id;
+ return dev_name(&pdev->dev);
}
@@ -1014,7 +1042,9 @@ enum pci_fixup_pass {
pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
- pci_fixup_resume, /* pci_enable_device() time */
+ pci_fixup_resume, /* pci_device_resume() */
+ pci_fixup_suspend, /* pci_device_suspend */
+ pci_fixup_resume_early, /* pci_device_resume_early() */
};
/* Anonymous variables would be nice... */
@@ -1036,6 +1066,12 @@ enum pci_fixup_pass {
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
resume##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
+ resume_early##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
+ suspend##vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
@@ -1060,7 +1096,10 @@ extern int pci_pci_problems;
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
-extern int pcibios_add_platform_entries(struct pci_dev *dev);
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state);
#ifdef CONFIG_PCI_MMCONFIG
extern void __init pci_mmcfg_early_init(void);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8f67e8f2a3c..a08cd06b541 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -95,9 +95,6 @@ struct hotplug_slot_attribute {
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
- * @get_address: Called to get pci address of a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
* @get_max_bus_speed: Called to get the max bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
@@ -120,7 +117,6 @@ struct hotplug_slot_ops {
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
- int (*get_address) (struct hotplug_slot *slot, u32 *value);
int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
@@ -140,7 +136,6 @@ struct hotplug_slot_info {
u8 attention_status;
u8 latch_status;
u8 adapter_status;
- u32 address;
enum pci_bus_speed max_bus_speed;
enum pci_bus_speed cur_bus_speed;
};
@@ -166,15 +161,14 @@ struct hotplug_slot {
/* Variables below this are for use only by the hotplug pci core. */
struct list_head slot_list;
- struct kobject kobj;
+ struct pci_slot *pci_slot;
};
#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
-extern int pci_hp_register (struct hotplug_slot *slot);
-extern int pci_hp_deregister (struct hotplug_slot *slot);
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
-extern struct kset *pci_hotplug_slots_kset;
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
@@ -227,9 +221,9 @@ struct hotplug_params {
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
-extern acpi_status acpi_run_oshp(acpi_handle handle);
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
int acpi_root_bridge(acpi_handle handle);
#endif
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e74b14acf8e..d8507eb394c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1520,6 +1520,7 @@
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
+#define PCI_DEVICE_ID_MARVELL_CAFE_SD 0x4101
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
@@ -2173,6 +2174,8 @@
#define PCI_DEVICE_ID_MPC8544 0x0033
#define PCI_DEVICE_ID_MPC8572E 0x0040
#define PCI_DEVICE_ID_MPC8572 0x0041
+#define PCI_DEVICE_ID_MPC8536E 0x0050
+#define PCI_DEVICE_ID_MPC8536 0x0051
#define PCI_DEVICE_ID_MPC8641 0x7010
#define PCI_DEVICE_ID_MPC8641D 0x7011
#define PCI_DEVICE_ID_MPC8610 0x7018
@@ -2190,6 +2193,7 @@
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383
#define PCI_VENDOR_ID_KORENIX 0x1982
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c0c1223c919..19958b92990 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
+#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
#define PCI_PM_CTRL 4 /* PM control and status register */
#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
index 9007ccdfc11..20838883535 100644
--- a/include/linux/percpu_counter.h
+++ b/include/linux/percpu_counter.h
@@ -35,7 +35,7 @@ int percpu_counter_init_irq(struct percpu_counter *fbc, s64 amount);
void percpu_counter_destroy(struct percpu_counter *fbc);
void percpu_counter_set(struct percpu_counter *fbc, s64 amount);
void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch);
-s64 __percpu_counter_sum(struct percpu_counter *fbc);
+s64 __percpu_counter_sum(struct percpu_counter *fbc, int set);
static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount)
{
@@ -44,13 +44,19 @@ static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount)
static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc)
{
- s64 ret = __percpu_counter_sum(fbc);
+ s64 ret = __percpu_counter_sum(fbc, 0);
return ret < 0 ? 0 : ret;
}
+static inline s64 percpu_counter_sum_and_set(struct percpu_counter *fbc)
+{
+ return __percpu_counter_sum(fbc, 1);
+}
+
+
static inline s64 percpu_counter_sum(struct percpu_counter *fbc)
{
- return __percpu_counter_sum(fbc);
+ return __percpu_counter_sum(fbc, 0);
}
static inline s64 percpu_counter_read(struct percpu_counter *fbc)
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 3261681c82a..95ac21ab3a0 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -53,6 +53,7 @@ struct platform_driver {
int (*suspend_late)(struct platform_device *, pm_message_t state);
int (*resume_early)(struct platform_device *);
int (*resume)(struct platform_device *);
+ struct pm_ext_ops *pm;
struct device_driver driver;
};
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 39a7ee859b6..4ad9de94449 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -112,7 +112,9 @@ typedef struct pm_message {
int event;
} pm_message_t;
-/*
+/**
+ * struct pm_ops - device PM callbacks
+ *
* Several driver power state transitions are externally visible, affecting
* the state of pending I/O queues and (for drivers that touch hardware)
* interrupts, wakeups, DMA, and other hardware state. There may also be
@@ -120,6 +122,284 @@ typedef struct pm_message {
* to the rest of the driver stack (such as a driver that's ON gating off
* clocks which are not in active use).
*
+ * The externally visible transitions are handled with the help of the following
+ * callbacks included in this structure:
+ *
+ * @prepare: Prepare the device for the upcoming transition, but do NOT change
+ * its hardware state. Prevent new children of the device from being
+ * registered after @prepare() returns (the driver's subsystem and
+ * generally the rest of the kernel is supposed to prevent new calls to the
+ * probe method from being made too once @prepare() has succeeded). If
+ * @prepare() detects a situation it cannot handle (e.g. registration of a
+ * child already in progress), it may return -EAGAIN, so that the PM core
+ * can execute it once again (e.g. after the new child has been registered)
+ * to recover from the race condition. This method is executed for all
+ * kinds of suspend transitions and is followed by one of the suspend
+ * callbacks: @suspend(), @freeze(), or @poweroff().
+ * The PM core executes @prepare() for all devices before starting to
+ * execute suspend callbacks for any of them, so drivers may assume all of
+ * the other devices to be present and functional while @prepare() is being
+ * executed. In particular, it is safe to make GFP_KERNEL memory
+ * allocations from within @prepare(). However, drivers may NOT assume
+ * anything about the availability of the user space at that time and it
+ * is not correct to request firmware from within @prepare() (it's too
+ * late to do that). [To work around this limitation, drivers may
+ * register suspend and hibernation notifiers that are executed before the
+ * freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare(). This method is executed for
+ * all kinds of resume transitions, following one of the resume callbacks:
+ * @resume(), @thaw(), @restore(). Also called if the state transition
+ * fails before the driver's suspend callback (@suspend(), @freeze(),
+ * @poweroff()) can be executed (e.g. if the suspend callback fails for one
+ * of the other devices that the PM core has unsuccessfully attempted to
+ * suspend earlier).
+ * The PM core executes @complete() after it has executed the appropriate
+ * resume callback for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ * contents of main memory are preserved. Quiesce the device, put it into
+ * a low power state appropriate for the upcoming system state (such as
+ * PCI_D3hot), and enable wakeup events as appropriate.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ * contents of main memory were preserved. Put the device into the
+ * appropriate state, according to the information saved in memory by the
+ * preceding @suspend(). The driver starts working again, responding to
+ * hardware events and software requests. The hardware may have gone
+ * through a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver may rely on while resuming. On most
+ * platforms, there are no restrictions on availability of resources like
+ * clocks during @resume().
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ * Quiesce operations so that a consistent image can be created, but do NOT
+ * otherwise put the device into a low power device state and do NOT emit
+ * system wakeup events. Save in main memory the device settings to be
+ * used by @restore() during the subsequent resume from hibernation or by
+ * the subsequent @thaw(), if the creation of the image or the restoration
+ * of main memory contents from it fails.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ * if the creation of the image fails. Also executed after a failing
+ * attempt to restore the contents of main memory from such an image.
+ * Undo the changes made by the preceding @freeze(), so the device can be
+ * operated in the same way as immediately before the call to @freeze().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ * Quiesce the device, put it into a low power state appropriate for the
+ * upcoming system state (such as PCI_D3hot), and enable wakeup events as
+ * appropriate.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ * memory from a hibernation image. Driver starts working again,
+ * responding to hardware events and software requests. Drivers may NOT
+ * make ANY assumptions about the hardware state right prior to @restore().
+ * On most platforms, there are no restrictions on availability of
+ * resources like clocks during @restore().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), and @restore(), do not cause the PM core to abort the resume
+ * transition during which they are returned. The error codes returned in
+ * that cases are only printed by the PM core to the system logs for debugging
+ * purposes. Still, it is recommended that drivers only return error codes
+ * from their resume methods in case of an unrecoverable failure (i.e. when the
+ * device being handled refuses to resume and becomes unusable) to allow us to
+ * modify the PM core in the future, so that it can avoid attempting to handle
+ * devices that failed to resume and their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed. However, it is not allowed to unregister a device from within any
+ * of its own callbacks.
+ */
+
+struct pm_ops {
+ int (*prepare)(struct device *dev);
+ void (*complete)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+ int (*freeze)(struct device *dev);
+ int (*thaw)(struct device *dev);
+ int (*poweroff)(struct device *dev);
+ int (*restore)(struct device *dev);
+};
+
+/**
+ * struct pm_ext_ops - extended device PM callbacks
+ *
+ * Some devices require certain operations related to suspend and hibernation
+ * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below
+ * is defined, adding callbacks to be executed with interrupts disabled to
+ * 'struct pm_ops'.
+ *
+ * The following callbacks included in 'struct pm_ext_ops' are executed with
+ * the nonboot CPUs switched off and with interrupts disabled on the only
+ * functional CPU. They also are executed with the PM core list of devices
+ * locked, so they must NOT unregister any devices.
+ *
+ * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
+ * actions required for suspending the device that need interrupts to be
+ * disabled
+ *
+ * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
+ * actions required for resuming the device that need interrupts to be
+ * disabled
+ *
+ * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
+ * actions required for freezing the device that need interrupts to be
+ * disabled
+ *
+ * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
+ * actions required for thawing the device that need interrupts to be
+ * disabled
+ *
+ * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
+ * actions required for handling the device that need interrupts to be
+ * disabled
+ *
+ * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
+ * actions required for restoring the operations of the device that need
+ * interrupts to be disabled
+ *
+ * All of the above callbacks return error codes, but the error codes returned
+ * by the resume operations, @resume_noirq(), @thaw_noirq(), and
+ * @restore_noirq(), do not cause the PM core to abort the resume transition
+ * during which they are returned. The error codes returned in that cases are
+ * only printed by the PM core to the system logs for debugging purposes.
+ * Still, as stated above, it is recommended that drivers only return error
+ * codes from their resume methods if the device being handled fails to resume
+ * and is not usable any more.
+ */
+
+struct pm_ext_ops {
+ struct pm_ops base;
+ int (*suspend_noirq)(struct device *dev);
+ int (*resume_noirq)(struct device *dev);
+ int (*freeze_noirq)(struct device *dev);
+ int (*thaw_noirq)(struct device *dev);
+ int (*poweroff_noirq)(struct device *dev);
+ int (*restore_noirq)(struct device *dev);
+};
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON No transition.
+ *
+ * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
+ * for all devices.
+ *
+ * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
+ * for all devices.
+ *
+ * HIBERNATE Hibernation image has been saved, call ->prepare() and
+ * ->poweroff() for all devices.
+ *
+ * QUIESCE Contents of main memory are going to be restored from a (loaded)
+ * hibernation image, call ->prepare() and ->freeze() for all
+ * devices.
+ *
+ * RESUME System is resuming, call ->resume() and ->complete() for all
+ * devices.
+ *
+ * THAW Hibernation image has been created, call ->thaw() and
+ * ->complete() for all devices.
+ *
+ * RESTORE Contents of main memory have been restored from a hibernation
+ * image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER Creation of a hibernation image or restoration of the main
+ * memory contents from a hibernation image has failed, call
+ * ->thaw() and ->complete() for all devices.
+ */
+
+#define PM_EVENT_ON 0x0000
+#define PM_EVENT_FREEZE 0x0001
+#define PM_EVENT_SUSPEND 0x0002
+#define PM_EVENT_HIBERNATE 0x0004
+#define PM_EVENT_QUIESCE 0x0008
+#define PM_EVENT_RESUME 0x0010
+#define PM_EVENT_THAW 0x0020
+#define PM_EVENT_RESTORE 0x0040
+#define PM_EVENT_RECOVER 0x0080
+
+#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+
+#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
+
+/**
+ * Device power management states
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations.
+ *
+ * DPM_ON Device is regarded as operational. Set this way
+ * initially and when ->complete() is about to be called.
+ * Also set when ->prepare() fails.
+ *
+ * DPM_PREPARING Device is going to be prepared for a PM transition. Set
+ * when ->prepare() is about to be called.
+ *
+ * DPM_RESUMING Device is going to be resumed. Set when ->resume(),
+ * ->thaw(), or ->restore() is about to be called.
+ *
+ * DPM_SUSPENDING Device has been prepared for a power transition. Set
+ * when ->prepare() has just succeeded.
+ *
+ * DPM_OFF Device is regarded as inactive. Set immediately after
+ * ->suspend(), ->freeze(), or ->poweroff() has succeeded.
+ * Also set when ->resume()_noirq, ->thaw_noirq(), or
+ * ->restore_noirq() is about to be called.
+ *
+ * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after
+ * ->suspend_noirq(), ->freeze_noirq(), or
+ * ->poweroff_noirq() has just succeeded.
+ */
+
+enum dpm_state {
+ DPM_INVALID,
+ DPM_ON,
+ DPM_PREPARING,
+ DPM_RESUMING,
+ DPM_SUSPENDING,
+ DPM_OFF,
+ DPM_OFF_IRQ,
+};
+
+struct dev_pm_info {
+ pm_message_t power_state;
+ unsigned can_wakeup:1;
+ unsigned should_wakeup:1;
+ enum dpm_state status; /* Owned by the PM core */
+#ifdef CONFIG_PM_SLEEP
+ struct list_head entry;
+#endif
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
* One transition is triggered by resume(), after a suspend() call; the
* message is implicit:
*
@@ -164,35 +444,13 @@ typedef struct pm_message {
* or from system low-power states such as standby or suspend-to-RAM.
*/
-#define PM_EVENT_ON 0
-#define PM_EVENT_FREEZE 1
-#define PM_EVENT_SUSPEND 2
-#define PM_EVENT_HIBERNATE 4
-#define PM_EVENT_PRETHAW 8
-
-#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-
-#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
-#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
-
-struct dev_pm_info {
- pm_message_t power_state;
- unsigned can_wakeup:1;
- unsigned should_wakeup:1;
- bool sleeping:1; /* Owned by the PM core */
-#ifdef CONFIG_PM_SLEEP
- struct list_head entry;
-#endif
-};
+#ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void device_power_up(pm_message_t state);
+extern void device_resume(pm_message_t state);
+extern void device_pm_unlock(void);
extern int device_power_down(pm_message_t state);
-extern void device_power_up(void);
-extern void device_resume(void);
-
-#ifdef CONFIG_PM_SLEEP
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index f0d0b2cb8d2..0aae7776185 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = dev->power.should_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+ dev->power.can_wakeup = !!val;
+}
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val)
static inline int device_may_wakeup(struct device *dev)
{
- return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- if (platform_enable_wakeup)
- return (*platform_enable_wakeup)(dev, is_on);
- return 0;
+ return dev->power.can_wakeup && dev->power.should_wakeup;
}
#else /* !CONFIG_PM */
@@ -72,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val) { }
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -80,11 +73,6 @@ static inline int device_can_wakeup(struct device *dev)
#define device_set_wakeup_enable(dev, val) do {} while (0)
#define device_may_wakeup(dev) 0
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- return 0;
-}
-
#endif /* !CONFIG_PM */
#endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 63b128d512f..1ce54b63085 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -1,6 +1,8 @@
/*
* Linux Plug and Play Support
* Copyright by Adam Belay <ambx1@neo.rr.com>
+ * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
*/
#ifndef _LINUX_PNP_H
@@ -15,7 +17,6 @@
struct pnp_protocol;
struct pnp_dev;
-struct pnp_resource_table;
/*
* Resource Management
@@ -24,7 +25,14 @@ struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
static inline int pnp_resource_valid(struct resource *res)
{
- if (res && !(res->flags & IORESOURCE_UNSET))
+ if (res)
+ return 1;
+ return 0;
+}
+
+static inline int pnp_resource_enabled(struct resource *res)
+{
+ if (res && !(res->flags & IORESOURCE_DISABLED))
return 1;
return 0;
}
@@ -40,19 +48,31 @@ static inline resource_size_t pnp_resource_len(struct resource *res)
static inline resource_size_t pnp_port_start(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_IO, bar)->start;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+ if (pnp_resource_valid(res))
+ return res->start;
+ return 0;
}
static inline resource_size_t pnp_port_end(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_IO, bar)->end;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+ if (pnp_resource_valid(res))
+ return res->end;
+ return 0;
}
static inline unsigned long pnp_port_flags(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_IO, bar)->flags;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+ if (pnp_resource_valid(res))
+ return res->flags;
+ return IORESOURCE_IO | IORESOURCE_AUTO;
}
static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
@@ -63,25 +83,41 @@ static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
static inline resource_size_t pnp_port_len(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_IO, bar));
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+ if (pnp_resource_valid(res))
+ return pnp_resource_len(res);
+ return 0;
}
static inline resource_size_t pnp_mem_start(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_MEM, bar)->start;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+ if (pnp_resource_valid(res))
+ return res->start;
+ return 0;
}
static inline resource_size_t pnp_mem_end(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_MEM, bar)->end;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+ if (pnp_resource_valid(res))
+ return res->end;
+ return 0;
}
static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_MEM, bar)->flags;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+ if (pnp_resource_valid(res))
+ return res->flags;
+ return IORESOURCE_MEM | IORESOURCE_AUTO;
}
static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
@@ -92,18 +128,30 @@ static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
static inline resource_size_t pnp_mem_len(struct pnp_dev *dev,
unsigned int bar)
{
- return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_MEM, bar));
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+ if (pnp_resource_valid(res))
+ return pnp_resource_len(res);
+ return 0;
}
static inline resource_size_t pnp_irq(struct pnp_dev *dev, unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->start;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+ if (pnp_resource_valid(res))
+ return res->start;
+ return -1;
}
static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->flags;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+ if (pnp_resource_valid(res))
+ return res->flags;
+ return IORESOURCE_IRQ | IORESOURCE_AUTO;
}
static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)
@@ -114,12 +162,20 @@ static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)
static inline resource_size_t pnp_dma(struct pnp_dev *dev, unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_DMA, bar)->start;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+ if (pnp_resource_valid(res))
+ return res->start;
+ return -1;
}
static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar)
{
- return pnp_get_resource(dev, IORESOURCE_DMA, bar)->flags;
+ struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+ if (pnp_resource_valid(res))
+ return res->flags;
+ return IORESOURCE_DMA | IORESOURCE_AUTO;
}
static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
@@ -128,57 +184,6 @@ static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
}
-#define PNP_PORT_FLAG_16BITADDR (1<<0)
-#define PNP_PORT_FLAG_FIXED (1<<1)
-
-struct pnp_port {
- unsigned short min; /* min base number */
- unsigned short max; /* max base number */
- unsigned char align; /* align boundary */
- unsigned char size; /* size of range */
- unsigned char flags; /* port flags */
- unsigned char pad; /* pad */
- struct pnp_port *next; /* next port */
-};
-
-#define PNP_IRQ_NR 256
-struct pnp_irq {
- DECLARE_BITMAP(map, PNP_IRQ_NR); /* bitmask for IRQ lines */
- unsigned char flags; /* IRQ flags */
- unsigned char pad; /* pad */
- struct pnp_irq *next; /* next IRQ */
-};
-
-struct pnp_dma {
- unsigned char map; /* bitmask for DMA channels */
- unsigned char flags; /* DMA flags */
- struct pnp_dma *next; /* next port */
-};
-
-struct pnp_mem {
- unsigned int min; /* min base number */
- unsigned int max; /* max base number */
- unsigned int align; /* align boundary */
- unsigned int size; /* size of range */
- unsigned char flags; /* memory flags */
- unsigned char pad; /* pad */
- struct pnp_mem *next; /* next memory resource */
-};
-
-#define PNP_RES_PRIORITY_PREFERRED 0
-#define PNP_RES_PRIORITY_ACCEPTABLE 1
-#define PNP_RES_PRIORITY_FUNCTIONAL 2
-#define PNP_RES_PRIORITY_INVALID 65535
-
-struct pnp_option {
- unsigned short priority; /* priority */
- struct pnp_port *port; /* first port */
- struct pnp_irq *irq; /* first IRQ */
- struct pnp_dma *dma; /* first DMA */
- struct pnp_mem *mem; /* first memory resource */
- struct pnp_option *next; /* used to chain dependent resources */
-};
-
/*
* Device Management
*/
@@ -246,9 +251,9 @@ struct pnp_dev {
int active;
int capabilities;
- struct pnp_option *independent;
- struct pnp_option *dependent;
- struct pnp_resource_table *res;
+ unsigned int num_dependent_sets;
+ struct list_head resources;
+ struct list_head options;
char name[PNP_NAME_LEN]; /* contains a human-readable name */
int flags; /* used by protocols */
@@ -425,6 +430,8 @@ void pnp_unregister_card_driver(struct pnp_card_driver *drv);
extern struct list_head pnp_cards;
/* resource management */
+int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t base,
+ resource_size_t size);
int pnp_auto_config_dev(struct pnp_dev *dev);
int pnp_start_dev(struct pnp_dev *dev);
int pnp_stop_dev(struct pnp_dev *dev);
@@ -452,6 +459,9 @@ static inline int pnp_register_card_driver(struct pnp_card_driver *drv) { return
static inline void pnp_unregister_card_driver(struct pnp_card_driver *drv) { }
/* resource management */
+static inline int pnp_possible_config(struct pnp_dev *dev, int type,
+ resource_size_t base,
+ resource_size_t size) { return 0; }
static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index 23f0c54175c..72b1a10a59b 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <linux/list.h>
-#ifdef CONFIG_DEBUG_PREEMPT
+#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
extern void add_preempt_count(int val);
extern void sub_preempt_count(int val);
#else
@@ -52,6 +52,34 @@ do { \
preempt_check_resched(); \
} while (0)
+/* For debugging and tracer internals only! */
+#define add_preempt_count_notrace(val) \
+ do { preempt_count() += (val); } while (0)
+#define sub_preempt_count_notrace(val) \
+ do { preempt_count() -= (val); } while (0)
+#define inc_preempt_count_notrace() add_preempt_count_notrace(1)
+#define dec_preempt_count_notrace() sub_preempt_count_notrace(1)
+
+#define preempt_disable_notrace() \
+do { \
+ inc_preempt_count_notrace(); \
+ barrier(); \
+} while (0)
+
+#define preempt_enable_no_resched_notrace() \
+do { \
+ barrier(); \
+ dec_preempt_count_notrace(); \
+} while (0)
+
+/* preempt_check_resched is OK to trace */
+#define preempt_enable_notrace() \
+do { \
+ preempt_enable_no_resched_notrace(); \
+ barrier(); \
+ preempt_check_resched(); \
+} while (0)
+
#else
#define preempt_disable() do { } while (0)
@@ -59,6 +87,10 @@ do { \
#define preempt_enable() do { } while (0)
#define preempt_check_resched() do { } while (0)
+#define preempt_disable_notrace() do { } while (0)
+#define preempt_enable_no_resched_notrace() do { } while (0)
+#define preempt_enable_notrace() do { } while (0)
+
#endif
#ifdef CONFIG_PREEMPT_NOTIFIERS
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index f98501ba557..c6f5f9dd0ce 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -95,8 +95,12 @@ extern void __ptrace_link(struct task_struct *child,
struct task_struct *new_parent);
extern void __ptrace_unlink(struct task_struct *child);
extern void ptrace_untrace(struct task_struct *child);
-extern int ptrace_may_attach(struct task_struct *task);
-extern int __ptrace_may_attach(struct task_struct *task);
+#define PTRACE_MODE_READ 1
+#define PTRACE_MODE_ATTACH 2
+/* Returns 0 on success, -errno on denial. */
+extern int __ptrace_may_access(struct task_struct *task, unsigned int mode);
+/* Returns true on success, false on denial. */
+extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
static inline int ptrace_reparented(struct task_struct *child)
{
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
new file mode 100644
index 00000000000..3945f803d51
--- /dev/null
+++ b/include/linux/pwm.h
@@ -0,0 +1,31 @@
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+struct pwm_device;
+
+/*
+ * pwm_request - request a PWM device
+ */
+struct pwm_device *pwm_request(int pwm_id, const char *label);
+
+/*
+ * pwm_free - free a PWM device
+ */
+void pwm_free(struct pwm_device *pwm);
+
+/*
+ * pwm_config - change a PWM device configuration
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+
+/*
+ * pwm_enable - start a PWM output toggling
+ */
+int pwm_enable(struct pwm_device *pwm);
+
+/*
+ * pwm_disable - stop a PWM output toggling
+ */
+void pwm_disable(struct pwm_device *pwm);
+
+#endif /* __ASM_ARCH_PWM_H */
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
new file mode 100644
index 00000000000..7a9754c9677
--- /dev/null
+++ b/include/linux/pwm_backlight.h
@@ -0,0 +1,17 @@
+/*
+ * Generic PWM backlight driver data - see drivers/video/backlight/pwm_bl.c
+ */
+#ifndef __LINUX_PWM_BACKLIGHT_H
+#define __LINUX_PWM_BACKLIGHT_H
+
+struct platform_pwm_backlight_data {
+ int pwm_id;
+ unsigned int max_brightness;
+ unsigned int dft_brightness;
+ unsigned int pwm_period_ns;
+ int (*init)(struct device *dev);
+ int (*notify)(int brightness);
+ void (*exit)(struct device *dev);
+};
+
+#endif
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index b3aa05baab8..8c774905dcf 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -151,7 +151,10 @@ extern struct lockdep_map rcu_lock_map;
#define __synchronize_sched() synchronize_rcu()
+#define call_rcu_sched(head, func) call_rcu(head, func)
+
extern void __rcu_init(void);
+#define rcu_init_sched() do { } while (0)
extern void rcu_check_callbacks(int cpu, int user);
extern void rcu_restart_cpu(int cpu);
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
new file mode 100644
index 00000000000..b0f39be08b6
--- /dev/null
+++ b/include/linux/rculist.h
@@ -0,0 +1,373 @@
+#ifndef _LINUX_RCULIST_H
+#define _LINUX_RCULIST_H
+
+#ifdef __KERNEL__
+
+/*
+ * RCU-protected list version
+ */
+#include <linux/list.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add_rcu(struct list_head *new,
+ struct list_head *prev, struct list_head *next)
+{
+ new->next = next;
+ new->prev = prev;
+ rcu_assign_pointer(prev->next, new);
+ next->prev = new;
+}
+
+/**
+ * list_add_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_rcu(struct list_head *new, struct list_head *head)
+{
+ __list_add_rcu(new, head, head->next);
+}
+
+/**
+ * list_add_tail_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_tail_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_tail_rcu(struct list_head *new,
+ struct list_head *head)
+{
+ __list_add_rcu(new, head->prev, head);
+}
+
+/**
+ * list_del_rcu - deletes entry from list without re-initialization
+ * @entry: the element to delete from the list.
+ *
+ * Note: list_empty() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_del_rcu()
+ * or list_add_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ *
+ * Note that the caller is not permitted to immediately free
+ * the newly deleted entry. Instead, either synchronize_rcu()
+ * or call_rcu() must be used to defer freeing until an RCU
+ * grace period has elapsed.
+ */
+static inline void list_del_rcu(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_replace_rcu - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * The @old entry will be replaced with the @new entry atomically.
+ * Note: @old should not be empty.
+ */
+static inline void list_replace_rcu(struct list_head *old,
+ struct list_head *new)
+{
+ new->next = old->next;
+ new->prev = old->prev;
+ rcu_assign_pointer(new->prev->next, new);
+ new->next->prev = new;
+ old->prev = LIST_POISON2;
+}
+
+/**
+ * list_splice_init_rcu - splice an RCU-protected list into an existing list.
+ * @list: the RCU-protected list to splice
+ * @head: the place in the list to splice the first list into
+ * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
+ *
+ * @head can be RCU-read traversed concurrently with this function.
+ *
+ * Note that this function blocks.
+ *
+ * Important note: the caller must take whatever action is necessary to
+ * prevent any other updates to @head. In principle, it is possible
+ * to modify the list as soon as sync() begins execution.
+ * If this sort of thing becomes necessary, an alternative version
+ * based on call_rcu() could be created. But only if -really-
+ * needed -- there is no shortage of RCU API members.
+ */
+static inline void list_splice_init_rcu(struct list_head *list,
+ struct list_head *head,
+ void (*sync)(void))
+{
+ struct list_head *first = list->next;
+ struct list_head *last = list->prev;
+ struct list_head *at = head->next;
+
+ if (list_empty(head))
+ return;
+
+ /* "first" and "last" tracking list, so initialize it. */
+
+ INIT_LIST_HEAD(list);
+
+ /*
+ * At this point, the list body still points to the source list.
+ * Wait for any readers to finish using the list before splicing
+ * the list body into the new list. Any new readers will see
+ * an empty list.
+ */
+
+ sync();
+
+ /*
+ * Readers are finished with the source list, so perform splice.
+ * The order is important if the new list is global and accessible
+ * to concurrent RCU readers. Note that RCU readers are not
+ * permitted to traverse the prev pointers without excluding
+ * this function.
+ */
+
+ last->next = at;
+ rcu_assign_pointer(head->next, first);
+ first->prev = head;
+ at->prev = last;
+}
+
+/**
+ * list_for_each_rcu - iterate over an rcu-protected list
+ * @pos: the &struct list_head to use as a loop cursor.
+ * @head: the head for your list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_rcu(pos, head) \
+ for (pos = rcu_dereference((head)->next); \
+ prefetch(pos->next), pos != (head); \
+ pos = rcu_dereference(pos->next))
+
+#define __list_for_each_rcu(pos, head) \
+ for (pos = rcu_dereference((head)->next); \
+ pos != (head); \
+ pos = rcu_dereference(pos->next))
+
+/**
+ * list_for_each_entry_rcu - iterate over rcu list of given type
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_entry_rcu(pos, head, member) \
+ for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \
+ prefetch(pos->member.next), &pos->member != (head); \
+ pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member))
+
+
+/**
+ * list_for_each_continue_rcu
+ * @pos: the &struct list_head to use as a loop cursor.
+ * @head: the head for your list.
+ *
+ * Iterate over an rcu-protected list, continuing after current point.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_continue_rcu(pos, head) \
+ for ((pos) = rcu_dereference((pos)->next); \
+ prefetch((pos)->next), (pos) != (head); \
+ (pos) = rcu_dereference((pos)->next))
+
+/**
+ * hlist_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry().
+ */
+static inline void hlist_del_rcu(struct hlist_node *n)
+{
+ __hlist_del(n);
+ n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_replace_rcu - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * The @old entry will be replaced with the @new entry atomically.
+ */
+static inline void hlist_replace_rcu(struct hlist_node *old,
+ struct hlist_node *new)
+{
+ struct hlist_node *next = old->next;
+
+ new->next = next;
+ new->pprev = old->pprev;
+ rcu_assign_pointer(*new->pprev, new);
+ if (next)
+ new->next->pprev = &new->next;
+ old->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs. Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_add_head_rcu(struct hlist_node *n,
+ struct hlist_head *h)
+{
+ struct hlist_node *first = h->first;
+
+ n->next = first;
+ n->pprev = &h->first;
+ rcu_assign_pointer(h->first, n);
+ if (first)
+ first->pprev = &n->next;
+}
+
+/**
+ * hlist_add_before_rcu
+ * @n: the new element to add to the hash list.
+ * @next: the existing element to add the new element before.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist
+ * before the specified node while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.
+ */
+static inline void hlist_add_before_rcu(struct hlist_node *n,
+ struct hlist_node *next)
+{
+ n->pprev = next->pprev;
+ n->next = next;
+ rcu_assign_pointer(*(n->pprev), n);
+ next->pprev = &n->next;
+}
+
+/**
+ * hlist_add_after_rcu
+ * @prev: the existing element to add the new element after.
+ * @n: the new element to add to the hash list.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist
+ * after the specified node while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.
+ */
+static inline void hlist_add_after_rcu(struct hlist_node *prev,
+ struct hlist_node *n)
+{
+ n->next = prev->next;
+ n->pprev = &prev->next;
+ rcu_assign_pointer(prev->next, n);
+ if (n->next)
+ n->next->pprev = &n->next;
+}
+
+/**
+ * hlist_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos: the type * to use as a loop cursor.
+ * @pos: the &struct hlist_node to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the hlist_node within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as hlist_add_head_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define hlist_for_each_entry_rcu(tpos, pos, head, member) \
+ for (pos = rcu_dereference((head)->first); \
+ pos && ({ prefetch(pos->next); 1; }) && \
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
+ pos = rcu_dereference(pos->next))
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index d42dbec0608..e8b4039cfb2 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -40,6 +40,7 @@
#include <linux/cpumask.h>
#include <linux/seqlock.h>
#include <linux/lockdep.h>
+#include <linux/completion.h>
/**
* struct rcu_head - callback structure for use with RCU
@@ -168,6 +169,27 @@ struct rcu_head {
(p) = (v); \
})
+/* Infrastructure to implement the synchronize_() primitives. */
+
+struct rcu_synchronize {
+ struct rcu_head head;
+ struct completion completion;
+};
+
+extern void wakeme_after_rcu(struct rcu_head *head);
+
+#define synchronize_rcu_xxx(name, func) \
+void name(void) \
+{ \
+ struct rcu_synchronize rcu; \
+ \
+ init_completion(&rcu.completion); \
+ /* Will wake me after RCU finished. */ \
+ func(&rcu.head, wakeme_after_rcu); \
+ /* Wait for it. */ \
+ wait_for_completion(&rcu.completion); \
+}
+
/**
* synchronize_sched - block until all CPUs have exited any non-preemptive
* kernel code sequences.
@@ -224,8 +246,8 @@ extern void call_rcu_bh(struct rcu_head *head,
/* Exported common interfaces */
extern void synchronize_rcu(void);
extern void rcu_barrier(void);
-extern long rcu_batches_completed(void);
-extern long rcu_batches_completed_bh(void);
+extern void rcu_barrier_bh(void);
+extern void rcu_barrier_sched(void);
/* Internal to kernel */
extern void rcu_init(void);
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 8a05c7e20bc..f04b64eca63 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -40,10 +40,39 @@
#include <linux/cpumask.h>
#include <linux/seqlock.h>
-#define rcu_qsctr_inc(cpu)
+struct rcu_dyntick_sched {
+ int dynticks;
+ int dynticks_snap;
+ int sched_qs;
+ int sched_qs_snap;
+ int sched_dynticks_snap;
+};
+
+DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched);
+
+static inline void rcu_qsctr_inc(int cpu)
+{
+ struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+ rdssp->sched_qs++;
+}
#define rcu_bh_qsctr_inc(cpu)
#define call_rcu_bh(head, rcu) call_rcu(head, rcu)
+/**
+ * call_rcu_sched - Queue RCU callback for invocation after sched grace period.
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual update function to be invoked after the grace period
+ *
+ * The update function will be invoked some time after a full
+ * synchronize_sched()-style grace period elapses, in other words after
+ * all currently executing preempt-disabled sections of code (including
+ * hardirq handlers, NMI handlers, and local_irq_save() blocks) have
+ * completed.
+ */
+extern void call_rcu_sched(struct rcu_head *head,
+ void (*func)(struct rcu_head *head));
+
extern void __rcu_read_lock(void) __acquires(RCU);
extern void __rcu_read_unlock(void) __releases(RCU);
extern int rcu_pending(int cpu);
@@ -55,6 +84,7 @@ extern int rcu_needs_cpu(int cpu);
extern void __synchronize_sched(void);
extern void __rcu_init(void);
+extern void rcu_init_sched(void);
extern void rcu_check_callbacks(int cpu, int user);
extern void rcu_restart_cpu(int cpu);
extern long rcu_batches_completed(void);
@@ -81,20 +111,20 @@ extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu);
struct softirq_action;
#ifdef CONFIG_NO_HZ
-DECLARE_PER_CPU(long, dynticks_progress_counter);
+DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched);
static inline void rcu_enter_nohz(void)
{
smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
- __get_cpu_var(dynticks_progress_counter)++;
- WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1);
+ __get_cpu_var(rcu_dyntick_sched).dynticks++;
+ WARN_ON(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1);
}
static inline void rcu_exit_nohz(void)
{
- __get_cpu_var(dynticks_progress_counter)++;
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
- WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1));
+ __get_cpu_var(rcu_dyntick_sched).dynticks++;
+ WARN_ON(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1));
}
#else /* CONFIG_NO_HZ */
diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h
index f3f4f28c696..c9ba2fdf807 100644
--- a/include/linux/resume-trace.h
+++ b/include/linux/resume-trace.h
@@ -8,7 +8,7 @@ extern int pm_trace_enabled;
struct device;
extern void set_trace_device(struct device *);
-extern void generate_resume_trace(void *tracedata, unsigned int user);
+extern void generate_resume_trace(const void *tracedata, unsigned int user);
#define TRACE_DEVICE(dev) do { \
if (pm_trace_enabled) \
diff --git a/include/linux/sched.h b/include/linux/sched.h
index c5d3f847ca8..1941d8b5cf1 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -134,7 +134,6 @@ extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
extern unsigned long nr_active(void);
extern unsigned long nr_iowait(void);
-extern unsigned long weighted_cpuload(const int cpu);
struct seq_file;
struct cfs_rq;
@@ -246,6 +245,8 @@ extern asmlinkage void schedule_tail(struct task_struct *prev);
extern void init_idle(struct task_struct *idle, int cpu);
extern void init_idle_bootup_task(struct task_struct *idle);
+extern int runqueue_is_locked(void);
+
extern cpumask_t nohz_cpu_mask;
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
extern int select_nohz_load_balancer(int cpu);
@@ -784,6 +785,8 @@ struct sched_domain {
unsigned int balance_interval; /* initialise to 1. units in ms. */
unsigned int nr_balance_failed; /* initialise to 0 */
+ u64 last_update;
+
#ifdef CONFIG_SCHEDSTATS
/* load_balance() stats */
unsigned int lb_count[CPU_MAX_IDLE_TYPES];
@@ -823,23 +826,6 @@ extern int arch_reinit_sched_domains(void);
#endif /* CONFIG_SMP */
-/*
- * A runqueue laden with a single nice 0 task scores a weighted_cpuload of
- * SCHED_LOAD_SCALE. This function returns 1 if any cpu is laden with a
- * task of nice 0 or enough lower priority tasks to bring up the
- * weighted_cpuload
- */
-static inline int above_background_load(void)
-{
- unsigned long cpu;
-
- for_each_online_cpu(cpu) {
- if (weighted_cpuload(cpu) >= SCHED_LOAD_SCALE)
- return 1;
- }
- return 0;
-}
-
struct io_context; /* See blkdev.h */
#define NGROUPS_SMALL 32
#define NGROUPS_PER_BLOCK ((unsigned int)(PAGE_SIZE / sizeof(gid_t)))
@@ -921,8 +907,8 @@ struct sched_class {
void (*set_cpus_allowed)(struct task_struct *p,
const cpumask_t *newmask);
- void (*join_domain)(struct rq *rq);
- void (*leave_domain)(struct rq *rq);
+ void (*rq_online)(struct rq *rq);
+ void (*rq_offline)(struct rq *rq);
void (*switched_from) (struct rq *this_rq, struct task_struct *task,
int running);
@@ -1039,6 +1025,7 @@ struct task_struct {
#endif
int prio, static_prio, normal_prio;
+ unsigned int rt_priority;
const struct sched_class *sched_class;
struct sched_entity se;
struct sched_rt_entity rt;
@@ -1075,12 +1062,6 @@ struct task_struct {
#endif
struct list_head tasks;
- /*
- * ptrace_list/ptrace_children forms the list of my children
- * that were stolen by a ptracer.
- */
- struct list_head ptrace_children;
- struct list_head ptrace_list;
struct mm_struct *mm, *active_mm;
@@ -1102,18 +1083,25 @@ struct task_struct {
/*
* pointers to (original) parent process, youngest child, younger sibling,
* older sibling, respectively. (p->father can be replaced with
- * p->parent->pid)
+ * p->real_parent->pid)
*/
- struct task_struct *real_parent; /* real parent process (when being debugged) */
- struct task_struct *parent; /* parent process */
+ struct task_struct *real_parent; /* real parent process */
+ struct task_struct *parent; /* recipient of SIGCHLD, wait4() reports */
/*
- * children/sibling forms the list of my children plus the
- * tasks I'm ptracing.
+ * children/sibling forms the list of my natural children
*/
struct list_head children; /* list of my children */
struct list_head sibling; /* linkage in my parent's children list */
struct task_struct *group_leader; /* threadgroup leader */
+ /*
+ * ptraced is the list of tasks this task is using ptrace on.
+ * This includes both natural children and PTRACE_ATTACH targets.
+ * p->ptrace_entry is p's link on the p->parent->ptraced list.
+ */
+ struct list_head ptraced;
+ struct list_head ptrace_entry;
+
/* PID/PID hash table linkage. */
struct pid_link pids[PIDTYPE_MAX];
struct list_head thread_group;
@@ -1122,7 +1110,6 @@ struct task_struct {
int __user *set_child_tid; /* CLONE_CHILD_SETTID */
int __user *clear_child_tid; /* CLONE_CHILD_CLEARTID */
- unsigned int rt_priority;
cputime_t utime, stime, utimescaled, stimescaled;
cputime_t gtime;
cputime_t prev_utime, prev_stime;
@@ -1141,12 +1128,12 @@ struct task_struct {
gid_t gid,egid,sgid,fsgid;
struct group_info *group_info;
kernel_cap_t cap_effective, cap_inheritable, cap_permitted, cap_bset;
- unsigned securebits;
struct user_struct *user;
+ unsigned securebits;
#ifdef CONFIG_KEYS
+ unsigned char jit_keyring; /* default keyring to attach requested keys to */
struct key *request_key_auth; /* assumed request_key authority */
struct key *thread_keyring; /* keyring private to this thread */
- unsigned char jit_keyring; /* default keyring to attach requested keys to */
#endif
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
@@ -1233,8 +1220,8 @@ struct task_struct {
# define MAX_LOCK_DEPTH 48UL
u64 curr_chain_key;
int lockdep_depth;
- struct held_lock held_locks[MAX_LOCK_DEPTH];
unsigned int lockdep_recursion;
+ struct held_lock held_locks[MAX_LOCK_DEPTH];
#endif
/* journalling filesystem info */
@@ -1262,10 +1249,6 @@ struct task_struct {
u64 acct_vm_mem1; /* accumulated virtual memory usage */
cputime_t acct_stimexpd;/* stime since last update */
#endif
-#ifdef CONFIG_NUMA
- struct mempolicy *mempolicy;
- short il_next;
-#endif
#ifdef CONFIG_CPUSETS
nodemask_t mems_allowed;
int cpuset_mems_generation;
@@ -1285,6 +1268,10 @@ struct task_struct {
struct list_head pi_state_list;
struct futex_pi_state *pi_state_cache;
#endif
+#ifdef CONFIG_NUMA
+ struct mempolicy *mempolicy;
+ short il_next;
+#endif
atomic_t fs_excl; /* holding fs exclusive resources */
struct rcu_head rcu;
@@ -1504,9 +1491,11 @@ static inline void put_task_struct(struct task_struct *t)
#define PF_SWAPWRITE 0x00800000 /* Allowed to write to swap */
#define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */
#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
+#define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
#define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */
#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */
+#define PF_FREEZER_NOSIG 0x80000000 /* Freezer won't send signals to it */
/*
* Only the _current_ task can read/write to tsk->flags, but other
@@ -1573,13 +1562,28 @@ static inline void sched_clock_idle_sleep_event(void)
static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
{
}
-#else
+
+#ifdef CONFIG_NO_HZ
+static inline void sched_clock_tick_stop(int cpu)
+{
+}
+
+static inline void sched_clock_tick_start(int cpu)
+{
+}
+#endif
+
+#else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
extern void sched_clock_init(void);
extern u64 sched_clock_cpu(int cpu);
extern void sched_clock_tick(void);
extern void sched_clock_idle_sleep_event(void);
extern void sched_clock_idle_wakeup_event(u64 delta_ns);
+#ifdef CONFIG_NO_HZ
+extern void sched_clock_tick_stop(int cpu);
+extern void sched_clock_tick_start(int cpu);
#endif
+#endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
/*
* For kernel-internal use: high-speed (but slightly incorrect) per-cpu
@@ -1622,6 +1626,7 @@ extern unsigned int sysctl_sched_child_runs_first;
extern unsigned int sysctl_sched_features;
extern unsigned int sysctl_sched_migration_cost;
extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_sched_shares_ratelimit;
int sched_nr_latency_handler(struct ctl_table *table, int write,
struct file *file, void __user *buffer, size_t *length,
@@ -1655,6 +1660,8 @@ extern int can_nice(const struct task_struct *p, const int nice);
extern int task_curr(const struct task_struct *p);
extern int idle_cpu(int cpu);
extern int sched_setscheduler(struct task_struct *, int, struct sched_param *);
+extern int sched_setscheduler_nocheck(struct task_struct *, int,
+ struct sched_param *);
extern struct task_struct *idle_task(int cpu);
extern struct task_struct *curr_task(int cpu);
extern void set_curr_task(int cpu, struct task_struct *p);
@@ -1870,9 +1877,6 @@ extern void wait_task_inactive(struct task_struct * p);
#define wait_task_inactive(p) do { } while (0)
#endif
-#define remove_parent(p) list_del_init(&(p)->sibling)
-#define add_parent(p) list_add_tail(&(p)->sibling,&(p)->parent->children)
-
#define next_task(p) list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
#define for_each_process(p) \
@@ -2131,6 +2135,18 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm)
}
#endif
+#ifdef CONFIG_TRACING
+extern void
+__trace_special(void *__tr, void *__data,
+ unsigned long arg1, unsigned long arg2, unsigned long arg3);
+#else
+static inline void
+__trace_special(void *__tr, void *__data,
+ unsigned long arg1, unsigned long arg2, unsigned long arg3)
+{
+}
+#endif
+
extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask);
extern long sched_getaffinity(pid_t pid, cpumask_t *mask);
@@ -2225,6 +2241,8 @@ static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p)
}
#endif /* CONFIG_MM_OWNER */
+#define TASK_STATE_TO_CHAR_STR "RSDTtZX"
+
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index c1f19dbceb0..92f09bdf117 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -7,14 +7,15 @@
inheritance of root-permissions and suid-root executable under
compatibility mode. We raise the effective and inheritable bitmasks
*of the executable file* if the effective uid of the new process is
- 0. If the real uid is 0, we raise the inheritable bitmask of the
+ 0. If the real uid is 0, we raise the effective (legacy) bit of the
executable file. */
#define SECURE_NOROOT 0
#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
-/* When set, setuid to/from uid 0 does not trigger capability-"fixes"
- to be compatible with old programs relying on set*uid to loose
- privileges. When unset, setuid doesn't change privileges. */
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+ When unset, to provide compatiblility with old programs relying on
+ set*uid to gain/lose privilege, transitions to/from uid 0 cause
+ capabilities to be gained/lost. */
#define SECURE_NO_SETUID_FIXUP 2
#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
@@ -26,10 +27,10 @@
#define SECURE_KEEP_CAPS 4
#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-/* Each securesetting is implemented using two bits. One bit specify
+/* Each securesetting is implemented using two bits. One bit specifies
whether the setting is on or off. The other bit specify whether the
- setting is fixed or not. A setting which is fixed cannot be changed
- from user-level. */
+ setting is locked or not. A setting which is locked cannot be
+ changed from user-level. */
#define issecure_mask(X) (1 << (X))
#define issecure(X) (issecure_mask(X) & current->securebits)
diff --git a/include/linux/security.h b/include/linux/security.h
index 50737c70e78..31c8851ec5d 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -46,7 +46,8 @@ struct audit_krule;
*/
extern int cap_capable(struct task_struct *tsk, int cap);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child);
+extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
+ unsigned int mode);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -79,6 +80,7 @@ struct xfrm_selector;
struct xfrm_policy;
struct xfrm_state;
struct xfrm_user_sec_ctx;
+struct seq_file;
extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
extern int cap_netlink_recv(struct sk_buff *skb, int cap);
@@ -289,10 +291,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
* Update module state after a successful pivot.
* @old_path contains the path for the old root.
* @new_path contains the path for the new root.
- * @sb_get_mnt_opts:
- * Get the security relevant mount options used for a superblock
- * @sb the superblock to get security mount options from
- * @opts binary data structure containing all lsm mount data
* @sb_set_mnt_opts:
* Set the security relevant mount options used for a superblock
* @sb the superblock to set security mount options for
@@ -1170,6 +1168,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
* attributes would be changed by the execve.
* @parent contains the task_struct structure for parent process.
* @child contains the task_struct structure for child process.
+ * @mode contains the PTRACE_MODE flags indicating the form of access.
* Return 0 if permission is granted.
* @capget:
* Get the @effective, @inheritable, and @permitted capability sets for
@@ -1240,11 +1239,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
* @pages contains the number of pages.
* Return 0 if permission is granted.
*
- * @register_security:
- * allow module stacking.
- * @name contains the name of the security module being stacked.
- * @ops contains a pointer to the struct security_operations of the module to stack.
- *
* @secid_to_secctx:
* Convert secid to security context.
* @secid contains the security ID.
@@ -1295,7 +1289,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace) (struct task_struct *parent, struct task_struct *child);
+ int (*ptrace) (struct task_struct *parent, struct task_struct *child,
+ unsigned int mode);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1328,6 +1323,7 @@ struct security_operations {
void (*sb_free_security) (struct super_block *sb);
int (*sb_copy_data) (char *orig, char *copy);
int (*sb_kern_mount) (struct super_block *sb, void *data);
+ int (*sb_show_options) (struct seq_file *m, struct super_block *sb);
int (*sb_statfs) (struct dentry *dentry);
int (*sb_mount) (char *dev_name, struct path *path,
char *type, unsigned long flags, void *data);
@@ -1343,8 +1339,6 @@ struct security_operations {
struct path *new_path);
void (*sb_post_pivotroot) (struct path *old_path,
struct path *new_path);
- int (*sb_get_mnt_opts) (const struct super_block *sb,
- struct security_mnt_opts *opts);
int (*sb_set_mnt_opts) (struct super_block *sb,
struct security_mnt_opts *opts);
void (*sb_clone_mnt_opts) (const struct super_block *oldsb,
@@ -1472,10 +1466,6 @@ struct security_operations {
int (*netlink_send) (struct sock *sk, struct sk_buff *skb);
int (*netlink_recv) (struct sk_buff *skb, int cap);
- /* allow module stacking */
- int (*register_security) (const char *name,
- struct security_operations *ops);
-
void (*d_instantiate) (struct dentry *dentry, struct inode *inode);
int (*getprocattr) (struct task_struct *p, char *name, char **value);
@@ -1565,7 +1555,6 @@ struct security_operations {
extern int security_init(void);
extern int security_module_enable(struct security_operations *ops);
extern int register_security(struct security_operations *ops);
-extern int mod_reg_security(const char *name, struct security_operations *ops);
extern struct dentry *securityfs_create_file(const char *name, mode_t mode,
struct dentry *parent, void *data,
const struct file_operations *fops);
@@ -1573,7 +1562,8 @@ extern struct dentry *securityfs_create_dir(const char *name, struct dentry *par
extern void securityfs_remove(struct dentry *dentry);
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child);
+int security_ptrace(struct task_struct *parent, struct task_struct *child,
+ unsigned int mode);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable,
@@ -1606,6 +1596,7 @@ int security_sb_alloc(struct super_block *sb);
void security_sb_free(struct super_block *sb);
int security_sb_copy_data(char *orig, char *copy);
int security_sb_kern_mount(struct super_block *sb, void *data);
+int security_sb_show_options(struct seq_file *m, struct super_block *sb);
int security_sb_statfs(struct dentry *dentry);
int security_sb_mount(char *dev_name, struct path *path,
char *type, unsigned long flags, void *data);
@@ -1617,8 +1608,6 @@ void security_sb_post_remount(struct vfsmount *mnt, unsigned long flags, void *d
void security_sb_post_addmount(struct vfsmount *mnt, struct path *mountpoint);
int security_sb_pivotroot(struct path *old_path, struct path *new_path);
void security_sb_post_pivotroot(struct path *old_path, struct path *new_path);
-int security_sb_get_mnt_opts(const struct super_block *sb,
- struct security_mnt_opts *opts);
int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts);
void security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb);
@@ -1755,9 +1744,11 @@ static inline int security_init(void)
return 0;
}
-static inline int security_ptrace(struct task_struct *parent, struct task_struct *child)
+static inline int security_ptrace(struct task_struct *parent,
+ struct task_struct *child,
+ unsigned int mode)
{
- return cap_ptrace(parent, child);
+ return cap_ptrace(parent, child, mode);
}
static inline int security_capget(struct task_struct *target,
@@ -1881,6 +1872,12 @@ static inline int security_sb_kern_mount(struct super_block *sb, void *data)
return 0;
}
+static inline int security_sb_show_options(struct seq_file *m,
+ struct super_block *sb)
+{
+ return 0;
+}
+
static inline int security_sb_statfs(struct dentry *dentry)
{
return 0;
@@ -1927,12 +1924,6 @@ static inline int security_sb_pivotroot(struct path *old_path,
static inline void security_sb_post_pivotroot(struct path *old_path,
struct path *new_path)
{ }
-static inline int security_sb_get_mnt_opts(const struct super_block *sb,
- struct security_mnt_opts *opts)
-{
- security_init_mnt_opts(opts);
- return 0;
-}
static inline int security_sb_set_mnt_opts(struct super_block *sb,
struct security_mnt_opts *opts)
diff --git a/include/linux/slab.h b/include/linux/slab.h
index c2ad3501659..9aa90a6f20e 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -1,7 +1,7 @@
/*
* Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
*
- * (C) SGI 2006, Christoph Lameter <clameter@sgi.com>
+ * (C) SGI 2006, Christoph Lameter
* Cleaned up and restructured to ease the addition of alternative
* implementations of SLAB allocators.
*/
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 71e43a12ebb..d117ea2825a 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -4,7 +4,7 @@
/*
* SLUB : A Slab allocator without object queues.
*
- * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 SGI, Christoph Lameter
*/
#include <linux/types.h>
#include <linux/gfp.h>
@@ -137,10 +137,12 @@ static __always_inline int kmalloc_index(size_t size)
if (size <= KMALLOC_MIN_SIZE)
return KMALLOC_SHIFT_LOW;
+#if KMALLOC_MIN_SIZE <= 64
if (size > 64 && size <= 96)
return 1;
if (size > 128 && size <= 192)
return 2;
+#endif
if (size <= 8) return 3;
if (size <= 16) return 4;
if (size <= 32) return 5;
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 55232ccf9cf..48262f86c96 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -7,9 +7,18 @@
*/
#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/cpumask.h>
extern void cpu_idle(void);
+struct call_single_data {
+ struct list_head list;
+ void (*func) (void *info);
+ void *info;
+ unsigned int flags;
+};
+
#ifdef CONFIG_SMP
#include <linux/preempt.h>
@@ -52,15 +61,34 @@ extern void smp_cpus_done(unsigned int max_cpus);
/*
* Call a function on all other processors
*/
-int smp_call_function(void(*func)(void *info), void *info, int retry, int wait);
-
+int smp_call_function(void(*func)(void *info), void *info, int wait);
+int smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info,
+ int wait);
int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
- int retry, int wait);
+ int wait);
+void __smp_call_function_single(int cpuid, struct call_single_data *data);
+
+/*
+ * Generic and arch helpers
+ */
+#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
+void generic_smp_call_function_single_interrupt(void);
+void generic_smp_call_function_interrupt(void);
+void init_call_single_data(void);
+void ipi_call_lock(void);
+void ipi_call_unlock(void);
+void ipi_call_lock_irq(void);
+void ipi_call_unlock_irq(void);
+#else
+static inline void init_call_single_data(void)
+{
+}
+#endif
/*
* Call a function on all processors
*/
-int on_each_cpu(void (*func) (void *info), void *info, int retry, int wait);
+int on_each_cpu(void (*func) (void *info), void *info, int wait);
#define MSG_ALL_BUT_SELF 0x8000 /* Assume <32768 CPU's */
#define MSG_ALL 0x8001
@@ -90,9 +118,9 @@ static inline int up_smp_call_function(void (*func)(void *), void *info)
{
return 0;
}
-#define smp_call_function(func, info, retry, wait) \
+#define smp_call_function(func, info, wait) \
(up_smp_call_function(func, info))
-#define on_each_cpu(func,info,retry,wait) \
+#define on_each_cpu(func,info,wait) \
({ \
local_irq_disable(); \
func(info); \
@@ -102,7 +130,7 @@ static inline int up_smp_call_function(void (*func)(void *), void *info)
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
-#define smp_call_function_single(cpuid, func, info, retry, wait) \
+#define smp_call_function_single(cpuid, func, info, wait) \
({ \
WARN_ON(cpuid != 0); \
local_irq_disable(); \
@@ -112,7 +140,9 @@ static inline void smp_send_reschedule(int cpu) { }
})
#define smp_call_function_mask(mask, func, info, wait) \
(up_smp_call_function(func, info))
-
+static inline void init_call_single_data(void)
+{
+}
#endif /* !SMP */
/*
diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h
index aab3a4cff4e..813be59bf34 100644
--- a/include/linux/smp_lock.h
+++ b/include/linux/smp_lock.h
@@ -27,11 +27,24 @@ static inline int reacquire_kernel_lock(struct task_struct *task)
extern void __lockfunc lock_kernel(void) __acquires(kernel_lock);
extern void __lockfunc unlock_kernel(void) __releases(kernel_lock);
+/*
+ * Various legacy drivers don't really need the BKL in a specific
+ * function, but they *do* need to know that the BKL became available.
+ * This function just avoids wrapping a bunch of lock/unlock pairs
+ * around code which doesn't really need it.
+ */
+static inline void cycle_kernel_lock(void)
+{
+ lock_kernel();
+ unlock_kernel();
+}
+
#else
#define lock_kernel() do { } while(0)
#define unlock_kernel() do { } while(0)
#define release_kernel_lock(task) do { } while(0)
+#define cycle_kernel_lock() do { } while(0)
#define reacquire_kernel_lock(task) 0
#define kernel_locked() 1
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index d5ca78b93a3..a3626aedaec 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -23,6 +23,15 @@ struct mmc_spi_platform_data {
/* sense switch on sd cards */
int (*get_ro)(struct device *);
+ /*
+ * If board does not use CD interrupts, driver can optimize polling
+ * using this function.
+ */
+ int (*get_cd)(struct device *);
+
+ /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
+ unsigned long caps;
+
/* how long to debounce card detect, in msecs */
u16 detect_delay;
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 6fff7f82ef1..e5bfe01ee30 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -42,7 +42,8 @@ struct rpc_clnt {
unsigned int cl_softrtry : 1,/* soft timeouts */
cl_discrtry : 1,/* disconnect before retry */
- cl_autobind : 1;/* use getport() */
+ cl_autobind : 1,/* use getport() */
+ cl_chatty : 1;/* be verbose */
struct rpc_rtt * cl_rtt; /* RTO estimator data */
const struct rpc_timeout *cl_timeout; /* Timeout strategy */
@@ -114,6 +115,7 @@ struct rpc_create_args {
#define RPC_CLNT_CREATE_NONPRIVPORT (1UL << 3)
#define RPC_CLNT_CREATE_NOPING (1UL << 4)
#define RPC_CLNT_CREATE_DISCRTRY (1UL << 5)
+#define RPC_CLNT_CREATE_QUIET (1UL << 6)
struct rpc_clnt *rpc_create(struct rpc_create_args *args);
struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *,
@@ -123,6 +125,9 @@ void rpc_shutdown_client(struct rpc_clnt *);
void rpc_release_client(struct rpc_clnt *);
int rpcb_register(u32, u32, int, unsigned short, int *);
+int rpcb_v4_register(const u32 program, const u32 version,
+ const struct sockaddr *address,
+ const char *netid, int *result);
int rpcb_getport_sync(struct sockaddr_in *, u32, u32, int);
void rpcb_getport_async(struct rpc_task *);
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index d1a5c8c1a0f..64981a2f1ca 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -135,7 +135,6 @@ struct rpc_task_setup {
#define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER)
#define RPC_DO_ROOTOVERRIDE(t) ((t)->tk_flags & RPC_TASK_ROOTCREDS)
#define RPC_ASSASSINATED(t) ((t)->tk_flags & RPC_TASK_KILLED)
-#define RPC_DO_CALLBACK(t) ((t)->tk_callback != NULL)
#define RPC_IS_SOFT(t) ((t)->tk_flags & RPC_TASK_SOFT)
#define RPC_TASK_RUNNING 0
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index a6977423baf..e8e69159af7 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
* that implement @begin(), but platforms implementing @begin() should
* also provide a @end() which cleans up transitions aborted before
* @enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ * Called by the PM core if the suspending of devices fails.
+ * This callback is optional and should only be implemented by platforms
+ * which require special recovery actions in that situation.
*/
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*finish)(void);
void (*end)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
* The methods in this structure allow a platform to carry out special
* operations required by it during a hibernation transition.
*
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
*
* @begin: Tell the platform driver that we're starting hibernation.
* Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
* @restore_cleanup: Clean up after a failing image restoration.
* Called right after the nonboot CPUs have been enabled and before
* thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ * Called by the PM core if the suspending of devices during hibernation
+ * fails. This callback is optional and should only be implemented by
+ * platforms which require special recovery actions in that situation.
*/
struct platform_hibernation_ops {
int (*begin)(void);
@@ -200,6 +211,7 @@ struct platform_hibernation_ops {
void (*leave)(void);
int (*pre_restore)(void);
void (*restore_cleanup)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_HIBERNATION
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 24f3d2282e1..2158fc0d5a5 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -179,4 +179,17 @@ void arch_update_cpu_topology(void);
#endif
#endif /* CONFIG_NUMA */
+#ifndef topology_physical_package_id
+#define topology_physical_package_id(cpu) ((void)(cpu), -1)
+#endif
+#ifndef topology_core_id
+#define topology_core_id(cpu) ((void)(cpu), 0)
+#endif
+#ifndef topology_thread_siblings
+#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
+#endif
+#ifndef topology_core_siblings
+#define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
+#endif
+
#endif /* _LINUX_TOPOLOGY_H */
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index f462439cc28..12b15c561a1 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -63,6 +63,7 @@ struct writeback_control {
unsigned for_writepages:1; /* This is a writepages() call */
unsigned range_cyclic:1; /* range_start is cyclic */
unsigned more_io:1; /* more io to be dispatched */
+ unsigned range_cont:1;
};
/*
@@ -105,6 +106,8 @@ extern int vm_highmem_is_dirtyable;
extern int block_dump;
extern int laptop_mode;
+extern unsigned long determine_dirtyable_memory(void);
+
extern int dirty_ratio_handler(struct ctl_table *table, int write,
struct file *filp, void __user *buffer, size_t *lenp,
loff_t *ppos);
diff --git a/include/pcmcia/bulkmem.h b/include/pcmcia/bulkmem.h
deleted file mode 100644
index 6bc7472293b..00000000000
--- a/include/pcmcia/bulkmem.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * bulkmem.h -- Definitions for bulk memory services
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * (C) 1999 David A. Hinds
- */
-
-#ifndef _LINUX_BULKMEM_H
-#define _LINUX_BULKMEM_H
-
-/* For GetFirstRegion and GetNextRegion */
-typedef struct region_info_t {
- u_int Attributes;
- u_int CardOffset;
- u_int RegionSize;
- u_int AccessSpeed;
- u_int BlockSize;
- u_int PartMultiple;
- u_char JedecMfr, JedecInfo;
- memory_handle_t next;
-} region_info_t;
-
-#define REGION_TYPE 0x0001
-#define REGION_TYPE_CM 0x0000
-#define REGION_TYPE_AM 0x0001
-#define REGION_PREFETCH 0x0008
-#define REGION_CACHEABLE 0x0010
-#define REGION_BAR_MASK 0xe000
-#define REGION_BAR_SHIFT 13
-
-int pcmcia_get_first_region(struct pcmcia_device *handle, region_info_t *rgn);
-int pcmcia_get_next_region(struct pcmcia_device *handle, region_info_t *rgn);
-
-#endif /* _LINUX_BULKMEM_H */
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index d3bbb19caf8..e2e10c1e9a0 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -595,7 +595,7 @@ int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple
int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse);
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, cisinfo_t *info);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *count);
/* ... but use these wrappers instead */
#define pcmcia_get_first_tuple(p_dev, tuple) \
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 87a260e3699..45d84b27578 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -373,9 +373,6 @@ struct pcmcia_socket;
int pcmcia_access_configuration_register(struct pcmcia_device *p_dev, conf_reg_t *reg);
int pcmcia_get_configuration_info(struct pcmcia_device *p_dev, config_info_t *config);
-int pcmcia_get_first_window(window_handle_t *win, win_req_t *req);
-int pcmcia_get_next_window(window_handle_t *win, win_req_t *req);
-int pcmcia_get_status(struct pcmcia_device *p_dev, cs_status_t *status);
int pcmcia_get_mem_page(window_handle_t win, memreq_t *req);
int pcmcia_map_mem_page(window_handle_t win, memreq_t *req);
int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
index 9a6bcc4952f..f402a0f435b 100644
--- a/include/pcmcia/cs_types.h
+++ b/include/pcmcia/cs_types.h
@@ -21,7 +21,8 @@
#include <sys/types.h>
#endif
-#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
+#if defined(__arm__) || defined(__mips__) || defined(__avr32__) || \
+ defined(__bfin__)
/* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
typedef u_int ioaddr_t;
#else
@@ -33,9 +34,6 @@ typedef u_int event_t;
typedef u_char cisdata_t;
typedef u_short page_t;
-struct pcmcia_device;
-typedef struct pcmcia_device *client_handle_t;
-
struct window_t;
typedef struct window_t *window_handle_t;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index f047a1fd64f..b316027c853 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -20,7 +20,6 @@
#include <linux/mod_devicetable.h>
#endif
-#include <pcmcia/bulkmem.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/device_id.h>
@@ -51,6 +50,24 @@ typedef struct mtd_info_t {
u_int CardOffset;
} mtd_info_t;
+typedef struct region_info_t {
+ u_int Attributes;
+ u_int CardOffset;
+ u_int RegionSize;
+ u_int AccessSpeed;
+ u_int BlockSize;
+ u_int PartMultiple;
+ u_char JedecMfr, JedecInfo;
+ memory_handle_t next;
+} region_info_t;
+#define REGION_TYPE 0x0001
+#define REGION_TYPE_CM 0x0000
+#define REGION_TYPE_AM 0x0001
+#define REGION_PREFETCH 0x0008
+#define REGION_CACHEABLE 0x0010
+#define REGION_BAR_MASK 0xe000
+#define REGION_BAR_SHIFT 13
+
typedef union ds_ioctl_arg_t {
adjust_t adjust;
config_info_t config;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index f95dca077c1..ed919dd9bb5 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -21,7 +21,6 @@
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
-#include <pcmcia/bulkmem.h>
#ifdef CONFIG_CARDBUS
#include <linux/pci.h>
#endif
@@ -136,8 +135,14 @@ struct pccard_resource_ops {
struct resource* (*find_mem) (unsigned long base, unsigned long num,
unsigned long align, int low,
struct pcmcia_socket *s);
- int (*adjust_resource) (struct pcmcia_socket *s,
- adjust_t *adj);
+ int (*add_io) (struct pcmcia_socket *s,
+ unsigned int action,
+ unsigned long r_start,
+ unsigned long r_end);
+ int (*add_mem) (struct pcmcia_socket *s,
+ unsigned int action,
+ unsigned long r_start,
+ unsigned long r_end);
int (*init) (struct pcmcia_socket *s);
void (*exit) (struct pcmcia_socket *s);
};
@@ -245,7 +250,6 @@ struct pcmcia_socket {
struct task_struct *thread;
struct completion thread_done;
- wait_queue_head_t thread_wait;
spinlock_t thread_lock; /* protects thread_events */
unsigned int thread_events;
diff --git a/include/pcmcia/version.h b/include/pcmcia/version.h
deleted file mode 100644
index 5ad9c5e198b..00000000000
--- a/include/pcmcia/version.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* version.h 1.94 2000/10/03 17:55:48 (David Hinds) */
-
-/* This file will be removed, please don't include it */
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index c36750ff6ae..483057b2f4b 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -2,29 +2,33 @@
* Copyright (c) 2005 Voltaire Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
*
- * This Software is licensed under one of the following licenses:
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
*
- * 1) under the terms of the "Common Public License 1.0" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/cpl.php.
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
*
- * 2) under the terms of the "The BSD License" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/bsd-license.php.
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
*
- * 3) under the terms of the "GNU General Public License (GPL) Version 2" a
- * copy of which is available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/gpl-license.php.
- *
- * Licensee has the right to choose one of the above licenses.
- *
- * Redistributions of source code must retain the above copyright
- * notice and one of the license notices.
- *
- * Redistributions in binary form must reproduce both the above copyright
- * notice, one of the license notices in the documentation
- * and/or other materials provided with the distribution.
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#if !defined(IB_ADDR_H)
@@ -57,6 +61,7 @@ struct rdma_dev_addr {
unsigned char dst_dev_addr[MAX_ADDR_LEN];
unsigned char broadcast[MAX_ADDR_LEN];
enum rdma_node_type dev_type;
+ struct net_device *src_dev;
};
/**
diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h
index f179d233ffc..00a2b8ec327 100644
--- a/include/rdma/ib_cache.h
+++ b/include/rdma/ib_cache.h
@@ -30,8 +30,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_cache.h 1349 2004-12-16 21:09:43Z roland $
*/
#ifndef _IB_CACHE_H
diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h
index a627c8682d2..ec7c6d99ed3 100644
--- a/include/rdma/ib_cm.h
+++ b/include/rdma/ib_cm.h
@@ -31,8 +31,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_cm.h 4311 2005-12-05 18:42:01Z sean.hefty $
*/
#if !defined(IB_CM_H)
#define IB_CM_H
diff --git a/include/rdma/ib_fmr_pool.h b/include/rdma/ib_fmr_pool.h
index 00dadbf94e1..f62b842e659 100644
--- a/include/rdma/ib_fmr_pool.h
+++ b/include/rdma/ib_fmr_pool.h
@@ -29,8 +29,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_fmr_pool.h 2730 2005-06-28 16:43:03Z sean.hefty $
*/
#if !defined(IB_FMR_POOL_H)
@@ -61,7 +59,7 @@ struct ib_fmr_pool_param {
int pool_size;
int dirty_watermark;
void (*flush_function)(struct ib_fmr_pool *pool,
- void * arg);
+ void *arg);
void *flush_arg;
unsigned cache:1;
};
diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
index 7228c056b9e..5f6c40fffcf 100644
--- a/include/rdma/ib_mad.h
+++ b/include/rdma/ib_mad.h
@@ -32,11 +32,9 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_mad.h 5596 2006-03-03 01:00:07Z sean.hefty $
*/
-#if !defined( IB_MAD_H )
+#if !defined(IB_MAD_H)
#define IB_MAD_H
#include <linux/list.h>
@@ -194,8 +192,7 @@ struct ib_vendor_mad {
u8 data[IB_MGMT_VENDOR_DATA];
};
-struct ib_class_port_info
-{
+struct ib_class_port_info {
u8 base_version;
u8 class_version;
__be16 capability_mask;
@@ -614,11 +611,11 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent,
* any class specific header, and MAD data area.
* If @rmpp_active is set, the RMPP header will be initialized for sending.
*/
-struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
- u32 remote_qpn, u16 pkey_index,
- int rmpp_active,
- int hdr_len, int data_len,
- gfp_t gfp_mask);
+struct ib_mad_send_buf *ib_create_send_mad(struct ib_mad_agent *mad_agent,
+ u32 remote_qpn, u16 pkey_index,
+ int rmpp_active,
+ int hdr_len, int data_len,
+ gfp_t gfp_mask);
/**
* ib_is_mad_class_rmpp - returns whether given management class
diff --git a/include/rdma/ib_pack.h b/include/rdma/ib_pack.h
index f926020d633..d7fc45c4eba 100644
--- a/include/rdma/ib_pack.h
+++ b/include/rdma/ib_pack.h
@@ -28,8 +28,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_pack.h 1349 2004-12-16 21:09:43Z roland $
*/
#ifndef IB_PACK_H
diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h
index 942692b0b92..3841c1aff69 100644
--- a/include/rdma/ib_sa.h
+++ b/include/rdma/ib_sa.h
@@ -30,8 +30,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_sa.h 2811 2005-07-06 18:11:43Z halr $
*/
#ifndef IB_SA_H
diff --git a/include/rdma/ib_smi.h b/include/rdma/ib_smi.h
index f29af135ba8..aaca0878668 100644
--- a/include/rdma/ib_smi.h
+++ b/include/rdma/ib_smi.h
@@ -32,11 +32,9 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_smi.h 1389 2004-12-27 22:56:47Z roland $
*/
-#if !defined( IB_SMI_H )
+#if !defined(IB_SMI_H)
#define IB_SMI_H
#include <rdma/ib_mad.h>
diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h
index 37650afb982..bd3d380781e 100644
--- a/include/rdma/ib_user_cm.h
+++ b/include/rdma/ib_user_cm.h
@@ -29,8 +29,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_user_cm.h 4019 2005-11-11 00:33:09Z sean.hefty $
*/
#ifndef IB_USER_CM_H
diff --git a/include/rdma/ib_user_mad.h b/include/rdma/ib_user_mad.h
index 29d2c7205a9..d6fce1cbdb9 100644
--- a/include/rdma/ib_user_mad.h
+++ b/include/rdma/ib_user_mad.h
@@ -29,8 +29,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_user_mad.h 2814 2005-07-06 19:14:09Z halr $
*/
#ifndef IB_USER_MAD_H
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
index 8d65bf0a625..a17f7710614 100644
--- a/include/rdma/ib_user_verbs.h
+++ b/include/rdma/ib_user_verbs.h
@@ -31,8 +31,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_user_verbs.h 4019 2005-11-11 00:33:09Z sean.hefty $
*/
#ifndef IB_USER_VERBS_H
@@ -291,7 +289,10 @@ struct ib_uverbs_wc {
__u32 opcode;
__u32 vendor_err;
__u32 byte_len;
- __u32 imm_data;
+ union {
+ __u32 imm_data;
+ __u32 invalidate_rkey;
+ } ex;
__u32 qp_num;
__u32 src_qp;
__u32 wc_flags;
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 31d30b1852e..90b529f7a15 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -34,8 +34,6 @@
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * $Id: ib_verbs.h 1349 2004-12-16 21:09:43Z roland $
*/
#if !defined(IB_VERBS_H)
@@ -93,7 +91,7 @@ enum ib_device_cap_flags {
IB_DEVICE_RC_RNR_NAK_GEN = (1<<12),
IB_DEVICE_SRQ_RESIZE = (1<<13),
IB_DEVICE_N_NOTIFY_CQ = (1<<14),
- IB_DEVICE_ZERO_STAG = (1<<15),
+ IB_DEVICE_LOCAL_DMA_LKEY = (1<<15),
IB_DEVICE_RESERVED = (1<<16), /* old SEND_W_INV */
IB_DEVICE_MEM_WINDOW = (1<<17),
/*
@@ -105,6 +103,8 @@ enum ib_device_cap_flags {
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
+ IB_DEVICE_MEM_MGT_EXTENSIONS = (1<<21),
+ IB_DEVICE_BLOCK_MULTICAST_LOOPBACK = (1<<22),
};
enum ib_atomic_cap {
@@ -150,6 +150,7 @@ struct ib_device_attr {
int max_srq;
int max_srq_wr;
int max_srq_sge;
+ unsigned int max_fast_reg_page_list_len;
u16 max_pkeys;
u8 local_ca_ack_delay;
};
@@ -226,6 +227,57 @@ static inline int ib_width_enum_to_int(enum ib_port_width width)
}
}
+struct ib_protocol_stats {
+ /* TBD... */
+};
+
+struct iw_protocol_stats {
+ u64 ipInReceives;
+ u64 ipInHdrErrors;
+ u64 ipInTooBigErrors;
+ u64 ipInNoRoutes;
+ u64 ipInAddrErrors;
+ u64 ipInUnknownProtos;
+ u64 ipInTruncatedPkts;
+ u64 ipInDiscards;
+ u64 ipInDelivers;
+ u64 ipOutForwDatagrams;
+ u64 ipOutRequests;
+ u64 ipOutDiscards;
+ u64 ipOutNoRoutes;
+ u64 ipReasmTimeout;
+ u64 ipReasmReqds;
+ u64 ipReasmOKs;
+ u64 ipReasmFails;
+ u64 ipFragOKs;
+ u64 ipFragFails;
+ u64 ipFragCreates;
+ u64 ipInMcastPkts;
+ u64 ipOutMcastPkts;
+ u64 ipInBcastPkts;
+ u64 ipOutBcastPkts;
+
+ u64 tcpRtoAlgorithm;
+ u64 tcpRtoMin;
+ u64 tcpRtoMax;
+ u64 tcpMaxConn;
+ u64 tcpActiveOpens;
+ u64 tcpPassiveOpens;
+ u64 tcpAttemptFails;
+ u64 tcpEstabResets;
+ u64 tcpCurrEstab;
+ u64 tcpInSegs;
+ u64 tcpOutSegs;
+ u64 tcpRetransSegs;
+ u64 tcpInErrs;
+ u64 tcpOutRsts;
+};
+
+union rdma_protocol_stats {
+ struct ib_protocol_stats ib;
+ struct iw_protocol_stats iw;
+};
+
struct ib_port_attr {
enum ib_port_state state;
enum ib_mtu max_mtu;
@@ -413,6 +465,8 @@ enum ib_wc_opcode {
IB_WC_FETCH_ADD,
IB_WC_BIND_MW,
IB_WC_LSO,
+ IB_WC_LOCAL_INV,
+ IB_WC_FAST_REG_MR,
/*
* Set value of IB_WC_RECV so consumers can test if a completion is a
* receive by testing (opcode & IB_WC_RECV).
@@ -423,7 +477,8 @@ enum ib_wc_opcode {
enum ib_wc_flags {
IB_WC_GRH = 1,
- IB_WC_WITH_IMM = (1<<1)
+ IB_WC_WITH_IMM = (1<<1),
+ IB_WC_WITH_INVALIDATE = (1<<2),
};
struct ib_wc {
@@ -433,7 +488,10 @@ struct ib_wc {
u32 vendor_err;
u32 byte_len;
struct ib_qp *qp;
- __be32 imm_data;
+ union {
+ __be32 imm_data;
+ u32 invalidate_rkey;
+ } ex;
u32 src_qp;
int wc_flags;
u16 pkey_index;
@@ -498,7 +556,8 @@ enum ib_qp_type {
};
enum ib_qp_create_flags {
- IB_QP_CREATE_IPOIB_UD_LSO = 1 << 0,
+ IB_QP_CREATE_IPOIB_UD_LSO = 1 << 0,
+ IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK = 1 << 1,
};
struct ib_qp_init_attr {
@@ -627,6 +686,9 @@ enum ib_wr_opcode {
IB_WR_ATOMIC_FETCH_AND_ADD,
IB_WR_LSO,
IB_WR_SEND_WITH_INV,
+ IB_WR_RDMA_READ_WITH_INV,
+ IB_WR_LOCAL_INV,
+ IB_WR_FAST_REG_MR,
};
enum ib_send_flags {
@@ -643,6 +705,12 @@ struct ib_sge {
u32 lkey;
};
+struct ib_fast_reg_page_list {
+ struct ib_device *device;
+ u64 *page_list;
+ unsigned int max_page_list_len;
+};
+
struct ib_send_wr {
struct ib_send_wr *next;
u64 wr_id;
@@ -675,6 +743,15 @@ struct ib_send_wr {
u16 pkey_index; /* valid for GSI only */
u8 port_num; /* valid for DR SMPs on switch only */
} ud;
+ struct {
+ u64 iova_start;
+ struct ib_fast_reg_page_list *page_list;
+ unsigned int page_shift;
+ unsigned int page_list_len;
+ u32 length;
+ int access_flags;
+ u32 rkey;
+ } fast_reg;
} wr;
};
@@ -777,7 +854,7 @@ struct ib_cq {
struct ib_uobject *uobject;
ib_comp_handler comp_handler;
void (*event_handler)(struct ib_event *, void *);
- void * cq_context;
+ void *cq_context;
int cqe;
atomic_t usecnt; /* count number of work queues */
};
@@ -883,7 +960,7 @@ struct ib_dma_mapping_ops {
void (*sync_single_for_cpu)(struct ib_device *dev,
u64 dma_handle,
size_t size,
- enum dma_data_direction dir);
+ enum dma_data_direction dir);
void (*sync_single_for_device)(struct ib_device *dev,
u64 dma_handle,
size_t size,
@@ -919,6 +996,8 @@ struct ib_device {
struct iw_cm_verbs *iwcm;
+ int (*get_protocol_stats)(struct ib_device *device,
+ union rdma_protocol_stats *stats);
int (*query_device)(struct ib_device *device,
struct ib_device_attr *device_attr);
int (*query_port)(struct ib_device *device,
@@ -1013,6 +1092,11 @@ struct ib_device {
int (*query_mr)(struct ib_mr *mr,
struct ib_mr_attr *mr_attr);
int (*dereg_mr)(struct ib_mr *mr);
+ struct ib_mr * (*alloc_fast_reg_mr)(struct ib_pd *pd,
+ int max_page_list_len);
+ struct ib_fast_reg_page_list * (*alloc_fast_reg_page_list)(struct ib_device *device,
+ int page_list_len);
+ void (*free_fast_reg_page_list)(struct ib_fast_reg_page_list *page_list);
int (*rereg_phys_mr)(struct ib_mr *mr,
int mr_rereg_mask,
struct ib_pd *pd,
@@ -1065,6 +1149,7 @@ struct ib_device {
char node_desc[64];
__be64 node_guid;
+ u32 local_dma_lkey;
u8 node_type;
u8 phys_port_cnt;
};
@@ -1807,6 +1892,54 @@ int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr);
int ib_dereg_mr(struct ib_mr *mr);
/**
+ * ib_alloc_fast_reg_mr - Allocates memory region usable with the
+ * IB_WR_FAST_REG_MR send work request.
+ * @pd: The protection domain associated with the region.
+ * @max_page_list_len: requested max physical buffer list length to be
+ * used with fast register work requests for this MR.
+ */
+struct ib_mr *ib_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len);
+
+/**
+ * ib_alloc_fast_reg_page_list - Allocates a page list array
+ * @device - ib device pointer.
+ * @page_list_len - size of the page list array to be allocated.
+ *
+ * This allocates and returns a struct ib_fast_reg_page_list * and a
+ * page_list array that is at least page_list_len in size. The actual
+ * size is returned in max_page_list_len. The caller is responsible
+ * for initializing the contents of the page_list array before posting
+ * a send work request with the IB_WC_FAST_REG_MR opcode.
+ *
+ * The page_list array entries must be translated using one of the
+ * ib_dma_*() functions just like the addresses passed to
+ * ib_map_phys_fmr(). Once the ib_post_send() is issued, the struct
+ * ib_fast_reg_page_list must not be modified by the caller until the
+ * IB_WC_FAST_REG_MR work request completes.
+ */
+struct ib_fast_reg_page_list *ib_alloc_fast_reg_page_list(
+ struct ib_device *device, int page_list_len);
+
+/**
+ * ib_free_fast_reg_page_list - Deallocates a previously allocated
+ * page list array.
+ * @page_list - struct ib_fast_reg_page_list pointer to be deallocated.
+ */
+void ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list);
+
+/**
+ * ib_update_fast_reg_key - updates the key portion of the fast_reg MR
+ * R_Key and L_Key.
+ * @mr - struct ib_mr pointer to be updated.
+ * @newkey - new key to be used.
+ */
+static inline void ib_update_fast_reg_key(struct ib_mr *mr, u8 newkey)
+{
+ mr->lkey = (mr->lkey & 0xffffff00) | newkey;
+ mr->rkey = (mr->rkey & 0xffffff00) | newkey;
+}
+
+/**
* ib_alloc_mw - Allocates a memory window.
* @pd: The protection domain associated with the memory window.
*/
diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h
index aeefa9b740d..cbb822e8d79 100644
--- a/include/rdma/iw_cm.h
+++ b/include/rdma/iw_cm.h
@@ -62,7 +62,7 @@ struct iw_cm_event {
struct sockaddr_in remote_addr;
void *private_data;
u8 private_data_len;
- void* provider_data;
+ void *provider_data;
};
/**
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 010f876f41d..22bb2e7bab1 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -2,29 +2,33 @@
* Copyright (c) 2005 Voltaire Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
*
- * This Software is licensed under one of the following licenses:
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
*
- * 1) under the terms of the "Common Public License 1.0" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/cpl.php.
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
*
- * 2) under the terms of the "The BSD License" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/bsd-license.php.
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
*
- * 3) under the terms of the "GNU General Public License (GPL) Version 2" a
- * copy of which is available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/gpl-license.php.
- *
- * Licensee has the right to choose one of the above licenses.
- *
- * Redistributions of source code must retain the above copyright
- * notice and one of the license notices.
- *
- * Redistributions in binary form must reproduce both the above copyright
- * notice, one of the license notices in the documentation
- * and/or other materials provided with the distribution.
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
*
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#if !defined(RDMA_CM_H)
@@ -57,11 +61,11 @@ enum rdma_cm_event_type {
};
enum rdma_port_space {
- RDMA_PS_SDP = 0x0001,
- RDMA_PS_IPOIB= 0x0002,
- RDMA_PS_TCP = 0x0106,
- RDMA_PS_UDP = 0x0111,
- RDMA_PS_SCTP = 0x0183
+ RDMA_PS_SDP = 0x0001,
+ RDMA_PS_IPOIB = 0x0002,
+ RDMA_PS_TCP = 0x0106,
+ RDMA_PS_UDP = 0x0111,
+ RDMA_PS_SCTP = 0x0183
};
struct rdma_addr {
diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h
index 950424b38f1..2389c3b4540 100644
--- a/include/rdma/rdma_cm_ib.h
+++ b/include/rdma/rdma_cm_ib.h
@@ -1,29 +1,33 @@
/*
* Copyright (c) 2006 Intel Corporation. All rights reserved.
*
- * This Software is licensed under one of the following licenses:
- *
- * 1) under the terms of the "Common Public License 1.0" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/cpl.php.
- *
- * 2) under the terms of the "The BSD License" a copy of which is
- * available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/bsd-license.php.
- *
- * 3) under the terms of the "GNU General Public License (GPL) Version 2" a
- * copy of which is available from the Open Source Initiative, see
- * http://www.opensource.org/licenses/gpl-license.php.
- *
- * Licensee has the right to choose one of the above licenses.
- *
- * Redistributions of source code must retain the above copyright
- * notice and one of the license notices.
- *
- * Redistributions in binary form must reproduce both the above copyright
- * notice, one of the license notices in the documentation
- * and/or other materials provided with the distribution.
- *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#if !defined(RDMA_CM_IB_H)
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index e19e5842316..16be12f1cbe 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -50,6 +50,7 @@ enum iscsi_uevent_e {
ISCSI_UEVENT_TGT_DSCVR = UEVENT_BASE + 15,
ISCSI_UEVENT_SET_HOST_PARAM = UEVENT_BASE + 16,
ISCSI_UEVENT_UNBIND_SESSION = UEVENT_BASE + 17,
+ ISCSI_UEVENT_CREATE_BOUND_SESSION = UEVENT_BASE + 18,
/* up events */
ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1,
@@ -78,6 +79,12 @@ struct iscsi_uevent {
uint16_t cmds_max;
uint16_t queue_depth;
} c_session;
+ struct msg_create_bound_session {
+ uint64_t ep_handle;
+ uint32_t initial_cmdsn;
+ uint16_t cmds_max;
+ uint16_t queue_depth;
+ } c_bound_session;
struct msg_destroy_session {
uint32_t sid;
} d_session;
@@ -250,42 +257,49 @@ enum iscsi_param {
ISCSI_PARAM_PING_TMO,
ISCSI_PARAM_RECV_TMO,
+
+ ISCSI_PARAM_IFACE_NAME,
+ ISCSI_PARAM_ISID,
+ ISCSI_PARAM_INITIATOR_NAME,
/* must always be last */
ISCSI_PARAM_MAX,
};
-#define ISCSI_MAX_RECV_DLENGTH (1 << ISCSI_PARAM_MAX_RECV_DLENGTH)
-#define ISCSI_MAX_XMIT_DLENGTH (1 << ISCSI_PARAM_MAX_XMIT_DLENGTH)
-#define ISCSI_HDRDGST_EN (1 << ISCSI_PARAM_HDRDGST_EN)
-#define ISCSI_DATADGST_EN (1 << ISCSI_PARAM_DATADGST_EN)
-#define ISCSI_INITIAL_R2T_EN (1 << ISCSI_PARAM_INITIAL_R2T_EN)
-#define ISCSI_MAX_R2T (1 << ISCSI_PARAM_MAX_R2T)
-#define ISCSI_IMM_DATA_EN (1 << ISCSI_PARAM_IMM_DATA_EN)
-#define ISCSI_FIRST_BURST (1 << ISCSI_PARAM_FIRST_BURST)
-#define ISCSI_MAX_BURST (1 << ISCSI_PARAM_MAX_BURST)
-#define ISCSI_PDU_INORDER_EN (1 << ISCSI_PARAM_PDU_INORDER_EN)
-#define ISCSI_DATASEQ_INORDER_EN (1 << ISCSI_PARAM_DATASEQ_INORDER_EN)
-#define ISCSI_ERL (1 << ISCSI_PARAM_ERL)
-#define ISCSI_IFMARKER_EN (1 << ISCSI_PARAM_IFMARKER_EN)
-#define ISCSI_OFMARKER_EN (1 << ISCSI_PARAM_OFMARKER_EN)
-#define ISCSI_EXP_STATSN (1 << ISCSI_PARAM_EXP_STATSN)
-#define ISCSI_TARGET_NAME (1 << ISCSI_PARAM_TARGET_NAME)
-#define ISCSI_TPGT (1 << ISCSI_PARAM_TPGT)
-#define ISCSI_PERSISTENT_ADDRESS (1 << ISCSI_PARAM_PERSISTENT_ADDRESS)
-#define ISCSI_PERSISTENT_PORT (1 << ISCSI_PARAM_PERSISTENT_PORT)
-#define ISCSI_SESS_RECOVERY_TMO (1 << ISCSI_PARAM_SESS_RECOVERY_TMO)
-#define ISCSI_CONN_PORT (1 << ISCSI_PARAM_CONN_PORT)
-#define ISCSI_CONN_ADDRESS (1 << ISCSI_PARAM_CONN_ADDRESS)
-#define ISCSI_USERNAME (1 << ISCSI_PARAM_USERNAME)
-#define ISCSI_USERNAME_IN (1 << ISCSI_PARAM_USERNAME_IN)
-#define ISCSI_PASSWORD (1 << ISCSI_PARAM_PASSWORD)
-#define ISCSI_PASSWORD_IN (1 << ISCSI_PARAM_PASSWORD_IN)
-#define ISCSI_FAST_ABORT (1 << ISCSI_PARAM_FAST_ABORT)
-#define ISCSI_ABORT_TMO (1 << ISCSI_PARAM_ABORT_TMO)
-#define ISCSI_LU_RESET_TMO (1 << ISCSI_PARAM_LU_RESET_TMO)
-#define ISCSI_HOST_RESET_TMO (1 << ISCSI_PARAM_HOST_RESET_TMO)
-#define ISCSI_PING_TMO (1 << ISCSI_PARAM_PING_TMO)
-#define ISCSI_RECV_TMO (1 << ISCSI_PARAM_RECV_TMO)
+#define ISCSI_MAX_RECV_DLENGTH (1ULL << ISCSI_PARAM_MAX_RECV_DLENGTH)
+#define ISCSI_MAX_XMIT_DLENGTH (1ULL << ISCSI_PARAM_MAX_XMIT_DLENGTH)
+#define ISCSI_HDRDGST_EN (1ULL << ISCSI_PARAM_HDRDGST_EN)
+#define ISCSI_DATADGST_EN (1ULL << ISCSI_PARAM_DATADGST_EN)
+#define ISCSI_INITIAL_R2T_EN (1ULL << ISCSI_PARAM_INITIAL_R2T_EN)
+#define ISCSI_MAX_R2T (1ULL << ISCSI_PARAM_MAX_R2T)
+#define ISCSI_IMM_DATA_EN (1ULL << ISCSI_PARAM_IMM_DATA_EN)
+#define ISCSI_FIRST_BURST (1ULL << ISCSI_PARAM_FIRST_BURST)
+#define ISCSI_MAX_BURST (1ULL << ISCSI_PARAM_MAX_BURST)
+#define ISCSI_PDU_INORDER_EN (1ULL << ISCSI_PARAM_PDU_INORDER_EN)
+#define ISCSI_DATASEQ_INORDER_EN (1ULL << ISCSI_PARAM_DATASEQ_INORDER_EN)
+#define ISCSI_ERL (1ULL << ISCSI_PARAM_ERL)
+#define ISCSI_IFMARKER_EN (1ULL << ISCSI_PARAM_IFMARKER_EN)
+#define ISCSI_OFMARKER_EN (1ULL << ISCSI_PARAM_OFMARKER_EN)
+#define ISCSI_EXP_STATSN (1ULL << ISCSI_PARAM_EXP_STATSN)
+#define ISCSI_TARGET_NAME (1ULL << ISCSI_PARAM_TARGET_NAME)
+#define ISCSI_TPGT (1ULL << ISCSI_PARAM_TPGT)
+#define ISCSI_PERSISTENT_ADDRESS (1ULL << ISCSI_PARAM_PERSISTENT_ADDRESS)
+#define ISCSI_PERSISTENT_PORT (1ULL << ISCSI_PARAM_PERSISTENT_PORT)
+#define ISCSI_SESS_RECOVERY_TMO (1ULL << ISCSI_PARAM_SESS_RECOVERY_TMO)
+#define ISCSI_CONN_PORT (1ULL << ISCSI_PARAM_CONN_PORT)
+#define ISCSI_CONN_ADDRESS (1ULL << ISCSI_PARAM_CONN_ADDRESS)
+#define ISCSI_USERNAME (1ULL << ISCSI_PARAM_USERNAME)
+#define ISCSI_USERNAME_IN (1ULL << ISCSI_PARAM_USERNAME_IN)
+#define ISCSI_PASSWORD (1ULL << ISCSI_PARAM_PASSWORD)
+#define ISCSI_PASSWORD_IN (1ULL << ISCSI_PARAM_PASSWORD_IN)
+#define ISCSI_FAST_ABORT (1ULL << ISCSI_PARAM_FAST_ABORT)
+#define ISCSI_ABORT_TMO (1ULL << ISCSI_PARAM_ABORT_TMO)
+#define ISCSI_LU_RESET_TMO (1ULL << ISCSI_PARAM_LU_RESET_TMO)
+#define ISCSI_HOST_RESET_TMO (1ULL << ISCSI_PARAM_HOST_RESET_TMO)
+#define ISCSI_PING_TMO (1ULL << ISCSI_PARAM_PING_TMO)
+#define ISCSI_RECV_TMO (1ULL << ISCSI_PARAM_RECV_TMO)
+#define ISCSI_IFACE_NAME (1ULL << ISCSI_PARAM_IFACE_NAME)
+#define ISCSI_ISID (1ULL << ISCSI_PARAM_ISID)
+#define ISCSI_INITIATOR_NAME (1ULL << ISCSI_PARAM_INITIATOR_NAME)
/* iSCSI HBA params */
enum iscsi_host_param {
@@ -296,20 +310,13 @@ enum iscsi_host_param {
ISCSI_HOST_PARAM_MAX,
};
-#define ISCSI_HOST_HWADDRESS (1 << ISCSI_HOST_PARAM_HWADDRESS)
-#define ISCSI_HOST_INITIATOR_NAME (1 << ISCSI_HOST_PARAM_INITIATOR_NAME)
-#define ISCSI_HOST_NETDEV_NAME (1 << ISCSI_HOST_PARAM_NETDEV_NAME)
-#define ISCSI_HOST_IPADDRESS (1 << ISCSI_HOST_PARAM_IPADDRESS)
+#define ISCSI_HOST_HWADDRESS (1ULL << ISCSI_HOST_PARAM_HWADDRESS)
+#define ISCSI_HOST_INITIATOR_NAME (1ULL << ISCSI_HOST_PARAM_INITIATOR_NAME)
+#define ISCSI_HOST_NETDEV_NAME (1ULL << ISCSI_HOST_PARAM_NETDEV_NAME)
+#define ISCSI_HOST_IPADDRESS (1ULL << ISCSI_HOST_PARAM_IPADDRESS)
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
-#define hostdata_session(_hostdata) (iscsi_ptr(*(unsigned long *)_hostdata))
-
-/**
- * iscsi_hostdata - get LLD hostdata from scsi_host
- * @_hostdata: pointer to scsi host's hostdata
- **/
-#define iscsi_hostdata(_hostdata) ((void*)_hostdata + sizeof(unsigned long))
/*
* These flags presents iSCSI Data-Path capabilities.
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index e0593bfae62..f2a2c116948 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -22,6 +22,7 @@
#define ISCSI_PROTO_H
#include <linux/types.h>
+#include <scsi/scsi.h>
#define ISCSI_DRAFT20_VERSION 0x00
@@ -156,7 +157,7 @@ struct iscsi_ecdb_ahdr {
uint8_t ahstype;
uint8_t reserved;
/* 4-byte aligned extended CDB spillover */
- uint8_t ecdb[260 - ISCSI_CDB_SIZE];
+ uint8_t ecdb[SCSI_MAX_VARLEN_CDB_SIZE - ISCSI_CDB_SIZE];
};
/* SCSI Response Header */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index cd3ca63d4fb..5e75bb7f311 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -24,6 +24,7 @@
#define LIBISCSI_H
#include <linux/types.h>
+#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
@@ -31,6 +32,7 @@
#include <scsi/iscsi_if.h>
struct scsi_transport_template;
+struct scsi_host_template;
struct scsi_device;
struct Scsi_Host;
struct scsi_cmnd;
@@ -40,6 +42,7 @@ struct iscsi_cls_session;
struct iscsi_cls_conn;
struct iscsi_session;
struct iscsi_nopin;
+struct device;
/* #define DEBUG_SCSI */
#ifdef DEBUG_SCSI
@@ -49,9 +52,7 @@ struct iscsi_nopin;
#endif
#define ISCSI_DEF_XMIT_CMDS_MAX 128 /* must be power of 2 */
-#define ISCSI_MGMT_CMDS_MAX 16 /* must be power of 2 */
-
-#define ISCSI_MGMT_ITT_OFFSET 0xa00
+#define ISCSI_MGMT_CMDS_MAX 15
#define ISCSI_DEF_CMD_PER_LUN 32
#define ISCSI_MAX_CMD_PER_LUN 128
@@ -69,7 +70,10 @@ enum {
/* Connection suspend "bit" */
#define ISCSI_SUSPEND_BIT 1
-#define ISCSI_ITT_MASK (0xfff)
+#define ISCSI_ITT_MASK (0x1fff)
+#define ISCSI_TOTAL_CMDS_MAX 4096
+/* this must be a power of two greater than ISCSI_MGMT_CMDS_MAX */
+#define ISCSI_TOTAL_CMDS_MIN 16
#define ISCSI_AGE_SHIFT 28
#define ISCSI_AGE_MASK (0xf << ISCSI_AGE_SHIFT)
@@ -82,18 +86,6 @@ enum {
ISCSI_DIGEST_SIZE = sizeof(__u32),
};
-struct iscsi_mgmt_task {
- /*
- * Becuae LLDs allocate their hdr differently, this is a pointer to
- * that storage. It must be setup at session creation time.
- */
- struct iscsi_hdr *hdr;
- char *data; /* mgmt payload */
- unsigned data_count; /* counts data to be sent */
- uint32_t itt; /* this ITT */
- void *dd_data; /* driver/transport data */
- struct list_head running;
-};
enum {
ISCSI_TASK_COMPLETED,
@@ -101,7 +93,7 @@ enum {
ISCSI_TASK_RUNNING,
};
-struct iscsi_cmd_task {
+struct iscsi_task {
/*
* Because LLDs allocate their hdr differently, this is a pointer
* and length to that storage. It must be setup at session
@@ -118,6 +110,7 @@ struct iscsi_cmd_task {
/* offset in unsolicited stream (bytes); */
unsigned unsol_offset;
unsigned data_count; /* remaining Data-Out */
+ char *data; /* mgmt payload */
struct scsi_cmnd *sc; /* associated SCSI cmd*/
struct iscsi_conn *conn; /* used connection */
@@ -128,9 +121,9 @@ struct iscsi_cmd_task {
void *dd_data; /* driver/transport data */
};
-static inline void* iscsi_next_hdr(struct iscsi_cmd_task *ctask)
+static inline void* iscsi_next_hdr(struct iscsi_task *task)
{
- return (void*)ctask->hdr + ctask->hdr_len;
+ return (void*)task->hdr + task->hdr_len;
}
/* Connection's states */
@@ -146,11 +139,6 @@ struct iscsi_conn {
void *dd_data; /* iscsi_transport data */
struct iscsi_session *session; /* parent session */
/*
- * LLDs should set this lock. It protects the transport recv
- * code
- */
- rwlock_t *recv_lock;
- /*
* conn_stop() flag: stop to recover, stop to terminate
*/
int stop_stage;
@@ -159,7 +147,7 @@ struct iscsi_conn {
unsigned long last_ping;
int ping_timeout;
int recv_timeout;
- struct iscsi_mgmt_task *ping_mtask;
+ struct iscsi_task *ping_task;
/* iSCSI connection-wide sequencing */
uint32_t exp_statsn;
@@ -175,9 +163,8 @@ struct iscsi_conn {
* should always fit in this buffer
*/
char *data;
- struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */
- struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */
- struct iscsi_cmd_task *ctask; /* xmit ctask in progress */
+ struct iscsi_task *login_task; /* mtask used for login/text */
+ struct iscsi_task *task; /* xmit task in progress */
/* xmit */
struct list_head mgmtqueue; /* mgmt (control) xmit queue */
@@ -208,9 +195,6 @@ struct iscsi_conn {
/* remote portal currently connected to */
int portal_port;
char portal_address[ISCSI_ADDRESS_BUF_LEN];
- /* local address */
- int local_port;
- char local_address[ISCSI_ADDRESS_BUF_LEN];
/* MIB-statistics */
uint64_t txdata_octets;
@@ -246,6 +230,7 @@ enum {
};
struct iscsi_session {
+ struct iscsi_cls_session *cls_session;
/*
* Syncs up the scsi eh thread with the iscsi eh thread when sending
* task management functions. This must be taken before the session
@@ -281,10 +266,8 @@ struct iscsi_session {
char *password;
char *password_in;
char *targetname;
+ char *ifacename;
char *initiatorname;
- /* hw address or netdev iscsi connection is bound to */
- char *hwaddress;
- char *netdev;
/* control data */
struct iscsi_transport *tt;
struct Scsi_Host *host;
@@ -298,12 +281,20 @@ struct iscsi_session {
int state; /* session state */
int age; /* counts session re-opens */
+ int scsi_cmds_max; /* max scsi commands */
int cmds_max; /* size of cmds array */
- struct iscsi_cmd_task **cmds; /* Original Cmds arr */
+ struct iscsi_task **cmds; /* Original Cmds arr */
struct iscsi_pool cmdpool; /* PDU's pool */
- int mgmtpool_max; /* size of mgmt array */
- struct iscsi_mgmt_task **mgmt_cmds; /* Original mgmt arr */
- struct iscsi_pool mgmtpool; /* Mgmt PDU's pool */
+};
+
+struct iscsi_host {
+ char *initiatorname;
+ /* hw address or netdev iscsi connection is bound to */
+ char *hwaddress;
+ char *netdev;
+ /* local address */
+ int local_port;
+ char local_address[ISCSI_ADDRESS_BUF_LEN];
};
/*
@@ -316,42 +307,44 @@ extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
extern int iscsi_queuecommand(struct scsi_cmnd *sc,
void (*done)(struct scsi_cmnd *));
-
/*
* iSCSI host helpers.
*/
+#define iscsi_host_priv(_shost) \
+ (shost_priv(_shost) + sizeof(struct iscsi_host))
+
extern int iscsi_host_set_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf,
int buflen);
extern int iscsi_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
+extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev);
+extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
+ int dd_data_size, uint16_t qdepth);
+extern void iscsi_host_remove(struct Scsi_Host *shost);
+extern void iscsi_host_free(struct Scsi_Host *shost);
/*
* session management
*/
extern struct iscsi_cls_session *
-iscsi_session_setup(struct iscsi_transport *, struct scsi_transport_template *,
- uint16_t, uint16_t, int, int, uint32_t, uint32_t *);
+iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost,
+ uint16_t, int, uint32_t, unsigned int);
extern void iscsi_session_teardown(struct iscsi_cls_session *);
-extern struct iscsi_session *class_to_transport_session(struct iscsi_cls_session *);
extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf, int buflen);
extern int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
enum iscsi_param param, char *buf);
-#define session_to_cls(_sess) \
- hostdata_session(_sess->host->hostdata)
-
#define iscsi_session_printk(prefix, _sess, fmt, a...) \
- iscsi_cls_session_printk(prefix, \
- (struct iscsi_cls_session *)session_to_cls(_sess), fmt, ##a)
+ iscsi_cls_session_printk(prefix, _sess->cls_session, fmt, ##a)
/*
* connection management
*/
extern struct iscsi_cls_conn *iscsi_conn_setup(struct iscsi_cls_session *,
- uint32_t);
+ int, uint32_t);
extern void iscsi_conn_teardown(struct iscsi_cls_conn *);
extern int iscsi_conn_start(struct iscsi_cls_conn *);
extern void iscsi_conn_stop(struct iscsi_cls_conn *, int);
@@ -360,25 +353,29 @@ extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *,
extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err);
extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf);
+extern void iscsi_suspend_tx(struct iscsi_conn *conn);
#define iscsi_conn_printk(prefix, _c, fmt, a...) \
- iscsi_cls_conn_printk(prefix, _c->cls_conn, fmt, ##a)
+ iscsi_cls_conn_printk(prefix, ((struct iscsi_conn *)_c)->cls_conn, \
+ fmt, ##a)
/*
* pdu and task processing
*/
extern void iscsi_update_cmdsn(struct iscsi_session *, struct iscsi_nopin *);
-extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *,
+extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_task *,
struct iscsi_data *hdr);
extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
char *, uint32_t);
extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
char *, int);
-extern int iscsi_verify_itt(struct iscsi_conn *, struct iscsi_hdr *,
- uint32_t *);
-extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask);
-extern void iscsi_free_mgmt_task(struct iscsi_conn *conn,
- struct iscsi_mgmt_task *mtask);
+extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
+ char *, int);
+extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern void iscsi_requeue_task(struct iscsi_task *task);
+extern void iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_get_task(struct iscsi_task *task);
/*
* generic helpers
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 32742c4563d..00137a7769e 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -9,6 +9,7 @@
#define _SCSI_SCSI_H
#include <linux/types.h>
+#include <scsi/scsi_cmnd.h>
/*
* The maximum number of SG segments that we will put inside a
@@ -400,6 +401,7 @@ struct scsi_lun {
#define SOFT_ERROR 0x2005
#define ADD_TO_MLQUEUE 0x2006
#define TIMEOUT_ERROR 0x2007
+#define SCSI_RETURN_NOT_HANDLED 0x2008
/*
* Midlevel queue return values.
@@ -424,6 +426,22 @@ struct scsi_lun {
#define driver_byte(result) (((result) >> 24) & 0xff)
#define suggestion(result) (driver_byte(result) & SUGGEST_MASK)
+static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 8;
+}
+
+static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 16;
+}
+
+static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 24;
+}
+
+
#define sense_class(sense) (((sense) >> 4) & 0x7)
#define sense_error(sense) ((sense) & 0xf)
#define sense_valid(sense) ((sense) & 0x80);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 3e46dfae819..66c944849d6 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -7,7 +7,6 @@
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
-#include <linux/blkdev.h>
struct Scsi_Host;
struct scsi_device;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index f6a9fe0ef09..6467f78b191 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -134,6 +134,7 @@ struct scsi_device {
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
+ unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
@@ -161,9 +162,29 @@ struct scsi_device {
struct execute_work ew; /* used to get process context on put */
+ struct scsi_dh_data *scsi_dh_data;
enum scsi_device_state sdev_state;
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
+
+struct scsi_device_handler {
+ /* Used by the infrastructure */
+ struct list_head list; /* list of scsi_device_handlers */
+ struct notifier_block nb;
+
+ /* Filled by the hardware handler */
+ struct module *module;
+ const char *name;
+ int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+ int (*activate)(struct scsi_device *);
+ int (*prep_fn)(struct scsi_device *, struct request *);
+};
+
+struct scsi_dh_data {
+ struct scsi_device_handler *scsi_dh;
+ char buf[0];
+};
+
#define to_scsi_device(d) \
container_of(d, struct scsi_device, sdev_gendev)
#define class_to_sdev(d) \
@@ -230,7 +251,9 @@ extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
uint, uint, uint, void *hostdata);
extern int scsi_add_device(struct Scsi_Host *host, uint channel,
uint target, uint lun);
+extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
extern void scsi_remove_device(struct scsi_device *);
+extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
extern int scsi_device_get(struct scsi_device *);
extern void scsi_device_put(struct scsi_device *);
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
new file mode 100644
index 00000000000..3ad2303d1a1
--- /dev/null
+++ b/include/scsi/scsi_dh.h
@@ -0,0 +1,69 @@
+/*
+ * Header file for SCSI device handler infrastruture.
+ *
+ * Modified version of patches posted by Mike Christie <michaelc@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2007
+ * Authors:
+ * Chandra Seetharaman <sekharan@us.ibm.com>
+ * Mike Anderson <andmike@linux.vnet.ibm.com>
+ */
+
+#include <scsi/scsi_device.h>
+
+enum {
+ SCSI_DH_OK = 0,
+ /*
+ * device errors
+ */
+ SCSI_DH_DEV_FAILED, /* generic device error */
+ SCSI_DH_DEV_TEMP_BUSY,
+ SCSI_DH_DEVICE_MAX, /* max device blkerr definition */
+
+ /*
+ * transport errors
+ */
+ SCSI_DH_NOTCONN = SCSI_DH_DEVICE_MAX + 1,
+ SCSI_DH_CONN_FAILURE,
+ SCSI_DH_TRANSPORT_MAX, /* max transport blkerr definition */
+
+ /*
+ * driver and generic errors
+ */
+ SCSI_DH_IO = SCSI_DH_TRANSPORT_MAX + 1, /* generic error */
+ SCSI_DH_INVALID_IO,
+ SCSI_DH_RETRY, /* retry the req, but not immediately */
+ SCSI_DH_IMM_RETRY, /* immediately retry the req */
+ SCSI_DH_TIMED_OUT,
+ SCSI_DH_RES_TEMP_UNAVAIL,
+ SCSI_DH_DEV_OFFLINED,
+ SCSI_DH_NOSYS,
+ SCSI_DH_DRIVER_MAX,
+};
+#if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
+extern int scsi_dh_activate(struct request_queue *);
+extern int scsi_dh_handler_exist(const char *);
+#else
+static inline int scsi_dh_activate(struct request_queue *req)
+{
+ return 0;
+}
+static inline int scsi_dh_handler_exist(const char *name)
+{
+ return 0;
+}
+#endif
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index aab1eae2ec4..f5444e033cc 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -30,11 +30,11 @@
struct scsi_transport_template;
struct iscsi_transport;
+struct iscsi_endpoint;
struct Scsi_Host;
struct iscsi_cls_conn;
struct iscsi_conn;
-struct iscsi_cmd_task;
-struct iscsi_mgmt_task;
+struct iscsi_task;
struct sockaddr;
/**
@@ -58,19 +58,22 @@ struct sockaddr;
* @stop_conn: suspend/recover/terminate connection
* @send_pdu: send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
* @session_recovery_timedout: notify LLD a block during recovery timed out
- * @init_cmd_task: Initialize a iscsi_cmd_task and any internal structs.
- * Called from queuecommand with session lock held.
- * @init_mgmt_task: Initialize a iscsi_mgmt_task and any internal structs.
- * Called from iscsi_conn_send_generic with xmitmutex.
- * @xmit_cmd_task: Requests LLD to transfer cmd task. Returns 0 or the
+ * @init_task: Initialize a iscsi_task and any internal structs.
+ * When offloading the data path, this is called from
+ * queuecommand with the session lock, or from the
+ * iscsi_conn_send_pdu context with the session lock.
+ * When not offloading the data path, this is called
+ * from the scsi work queue without the session lock.
+ * @xmit_task Requests LLD to transfer cmd task. Returns 0 or the
* the number of bytes transferred on success, and -Exyz
- * value on error.
- * @xmit_mgmt_task: Requests LLD to transfer mgmt task. Returns 0 or the
- * the number of bytes transferred on success, and -Exyz
- * value on error.
- * @cleanup_cmd_task: requests LLD to fail cmd task. Called with xmitmutex
- * and session->lock after the connection has been
- * suspended and terminated during recovery. If called
+ * value on error. When offloading the data path, this
+ * is called from queuecommand with the session lock, or
+ * from the iscsi_conn_send_pdu context with the session
+ * lock. When not offloading the data path, this is called
+ * from the scsi work queue without the session lock.
+ * @cleanup_task: requests LLD to fail task. Called with session lock
+ * and after the connection has been suspended and
+ * terminated during recovery. If called
* from abort task then connection is not suspended
* or terminated but sk_callback_lock is held
*
@@ -83,17 +86,9 @@ struct iscsi_transport {
/* LLD sets this to indicate what values it can export to sysfs */
uint64_t param_mask;
uint64_t host_param_mask;
- struct scsi_host_template *host_template;
- /* LLD connection data size */
- int conndata_size;
- /* LLD session data size */
- int sessiondata_size;
- int max_lun;
- unsigned int max_conn;
- unsigned int max_cmd_len;
- struct iscsi_cls_session *(*create_session) (struct iscsi_transport *it,
- struct scsi_transport_template *t, uint16_t, uint16_t,
- uint32_t sn, uint32_t *hn);
+ struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep,
+ uint16_t cmds_max, uint16_t qdepth,
+ uint32_t sn, uint32_t *hn);
void (*destroy_session) (struct iscsi_cls_session *session);
struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess,
uint32_t cid);
@@ -118,20 +113,15 @@ struct iscsi_transport {
char *data, uint32_t data_size);
void (*get_stats) (struct iscsi_cls_conn *conn,
struct iscsi_stats *stats);
- int (*init_cmd_task) (struct iscsi_cmd_task *ctask);
- void (*init_mgmt_task) (struct iscsi_conn *conn,
- struct iscsi_mgmt_task *mtask);
- int (*xmit_cmd_task) (struct iscsi_conn *conn,
- struct iscsi_cmd_task *ctask);
- void (*cleanup_cmd_task) (struct iscsi_conn *conn,
- struct iscsi_cmd_task *ctask);
- int (*xmit_mgmt_task) (struct iscsi_conn *conn,
- struct iscsi_mgmt_task *mtask);
+ int (*init_task) (struct iscsi_task *task);
+ int (*xmit_task) (struct iscsi_task *task);
+ void (*cleanup_task) (struct iscsi_conn *conn,
+ struct iscsi_task *task);
void (*session_recovery_timedout) (struct iscsi_cls_session *session);
- int (*ep_connect) (struct sockaddr *dst_addr, int non_blocking,
- uint64_t *ep_handle);
- int (*ep_poll) (uint64_t ep_handle, int timeout_ms);
- void (*ep_disconnect) (uint64_t ep_handle);
+ struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr,
+ int non_blocking);
+ int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
+ void (*ep_disconnect) (struct iscsi_endpoint *ep);
int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
uint32_t enable, struct sockaddr *dst_addr);
};
@@ -172,9 +162,10 @@ enum {
ISCSI_SESSION_FREE,
};
+#define ISCSI_MAX_TARGET -1
+
struct iscsi_cls_session {
struct list_head sess_list; /* item in session_list */
- struct list_head host_list;
struct iscsi_transport *transport;
spinlock_t lock;
struct work_struct block_work;
@@ -186,7 +177,7 @@ struct iscsi_cls_session {
int recovery_tmo;
struct delayed_work recovery_work;
- int target_id;
+ unsigned int target_id;
int state;
int sid; /* session id */
@@ -203,14 +194,22 @@ struct iscsi_cls_session {
#define starget_to_session(_stgt) \
iscsi_dev_to_session(_stgt->dev.parent)
-struct iscsi_host {
- struct list_head sessions;
+struct iscsi_cls_host {
atomic_t nr_scans;
struct mutex mutex;
struct workqueue_struct *scan_workq;
char scan_workq_name[KOBJ_NAME_LEN];
};
+extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
+ void (*fn)(struct iscsi_cls_session *));
+
+struct iscsi_endpoint {
+ void *dd_data; /* LLD private data */
+ struct device dev;
+ unsigned int id;
+};
+
/*
* session and connection functions that can be used by HW iSCSI LLDs
*/
@@ -222,22 +221,26 @@ struct iscsi_host {
extern int iscsi_session_chkready(struct iscsi_cls_session *session);
extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost,
- struct iscsi_transport *transport);
+ struct iscsi_transport *transport, int dd_size);
extern int iscsi_add_session(struct iscsi_cls_session *session,
unsigned int target_id);
extern int iscsi_session_event(struct iscsi_cls_session *session,
enum iscsi_uevent_e event);
extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost,
struct iscsi_transport *t,
+ int dd_size,
unsigned int target_id);
extern void iscsi_remove_session(struct iscsi_cls_session *session);
extern void iscsi_free_session(struct iscsi_cls_session *session);
extern int iscsi_destroy_session(struct iscsi_cls_session *session);
extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
- uint32_t cid);
+ int dd_size, uint32_t cid);
extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
extern void iscsi_unblock_session(struct iscsi_cls_session *session);
extern void iscsi_block_session(struct iscsi_cls_session *session);
extern int iscsi_scan_finished(struct Scsi_Host *shost, unsigned long time);
+extern struct iscsi_endpoint *iscsi_create_endpoint(int dd_size);
+extern void iscsi_destroy_endpoint(struct iscsi_endpoint *ep);
+extern struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle);
#endif
diff --git a/include/scsi/sd.h b/include/scsi/sd.h
deleted file mode 100644
index 4f032d48cb6..00000000000
--- a/include/scsi/sd.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _SCSI_DISK_H
-#define _SCSI_DISK_H
-
-/*
- * More than enough for everybody ;) The huge number of majors
- * is a leftover from 16bit dev_t days, we don't really need that
- * much numberspace.
- */
-#define SD_MAJORS 16
-
-/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
-
-/*
- * Time out in seconds for disks and Magneto-opticals (which are slower).
- */
-#define SD_TIMEOUT (30 * HZ)
-#define SD_MOD_TIMEOUT (75 * HZ)
-
-/*
- * Number of allowed retries
- */
-#define SD_MAX_RETRIES 5
-#define SD_PASSTHROUGH_RETRIES 1
-
-/*
- * Size of the initial data buffer for mode and read capacity data
- */
-#define SD_BUF_SIZE 512
-
-struct scsi_disk {
- struct scsi_driver *driver; /* always &sd_template */
- struct scsi_device *device;
- struct device dev;
- struct gendisk *disk;
- unsigned int openers; /* protected by BKL for now, yuck */
- sector_t capacity; /* size in 512-byte sectors */
- u32 index;
- u8 media_present;
- u8 write_prot;
- unsigned previous_state : 1;
- unsigned WCE : 1; /* state of disk WCE bit */
- unsigned RCD : 1; /* state of disk RCD bit, unused */
- unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
-};
-#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
-
-#define sd_printk(prefix, sdsk, fmt, a...) \
- (sdsk)->disk ? \
- sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \
- (sdsk)->disk->disk_name, ##a) : \
- sdev_printk(prefix, (sdsk)->device, fmt, ##a)
-
-#endif /* _SCSI_DISK_H */
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
index 519c49a0fc1..934ae389671 100644
--- a/include/scsi/sg.h
+++ b/include/scsi/sg.h
@@ -206,6 +206,7 @@ typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
#define SG_SCSI_RESET_DEVICE 1
#define SG_SCSI_RESET_BUS 2
#define SG_SCSI_RESET_HOST 3
+#define SG_SCSI_RESET_TARGET 4
/* synchronous SCSI command ioctl, (only in version 3 interface) */
#define SG_IO 0x2285 /* similar effect as write() followed by read() */
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 00000000000..b236a9d1d6e
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_LINE_2 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id);
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/include/sound/control.h b/include/sound/control.h
index 3dc1291f52d..4721b4bba05 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -129,9 +129,6 @@ int snd_ctl_unregister_ioctl_compat(snd_kctl_ioctl_func_t fcn);
#define snd_ctl_unregister_ioctl_compat(fcn)
#endif
-int snd_ctl_elem_read(struct snd_card *card, struct snd_ctl_elem_value *control);
-int snd_ctl_elem_write(struct snd_card *card, struct snd_ctl_file *file, struct snd_ctl_elem_value *control);
-
static inline unsigned int snd_ctl_get_ioffnum(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id)
{
return id->numid - kctl->id.numid;
diff --git a/include/sound/core.h b/include/sound/core.h
index 695ee53488a..558b96284bd 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -412,13 +412,13 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...)
#endif /* CONFIG_SND_DEBUG */
-#ifdef CONFIG_SND_DEBUG_DETECT
+#ifdef CONFIG_SND_DEBUG_VERBOSE
/**
* snd_printdd - debug printk
* @format: format string
*
* Works like snd_printk() for debugging purposes.
- * Ignored when CONFIG_SND_DEBUG_DETECT is not set.
+ * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
*/
#define snd_printdd(format, args...) snd_printk(format, ##args)
#else
@@ -442,7 +442,7 @@ struct snd_pci_quirk {
unsigned short subvendor; /* PCI subvendor ID */
unsigned short subdevice; /* PCI subdevice ID */
int value; /* value */
-#ifdef CONFIG_SND_DEBUG_DETECT
+#ifdef CONFIG_SND_DEBUG_VERBOSE
const char *name; /* name of the device (optional) */
#endif
};
@@ -450,7 +450,7 @@ struct snd_pci_quirk {
#define _SND_PCI_QUIRK_ID(vend,dev) \
.subvendor = (vend), .subdevice = (dev)
#define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)}
-#ifdef CONFIG_SND_DEBUG_DETECT
+#ifdef CONFIG_SND_DEBUG_VERBOSE
#define SND_PCI_QUIRK(vend,dev,xname,val) \
{_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)}
#else
diff --git a/include/sound/cs4231-regs.h b/include/sound/cs4231-regs.h
index e8d1f3e31f9..92647532c45 100644
--- a/include/sound/cs4231-regs.h
+++ b/include/sound/cs4231-regs.h
@@ -177,4 +177,12 @@
#define CS4236_RIGHT_WAVE 0x1c /* right wavetable serial port volume */
#define CS4236_VERSION 0x9c /* chip version and ID */
+/* definitions for extended registers - OPTI93X */
+#define OPTi931_AUX_LEFT_INPUT 0x10
+#define OPTi931_AUX_RIGHT_INPUT 0x11
+#define OPTi93X_MIC_LEFT_INPUT 0x14
+#define OPTi93X_MIC_RIGHT_INPUT 0x15
+#define OPTi93X_OUT_LEFT 0x16
+#define OPTi93X_OUT_RIGHT 0x17
+
#endif /* __SOUND_CS4231_REGS_H */
diff --git a/include/sound/cs4231.h b/include/sound/cs4231.h
index 66055d702aa..f0785f9f4ae 100644
--- a/include/sound/cs4231.h
+++ b/include/sound/cs4231.h
@@ -58,6 +58,7 @@
/* compatible, but clones */
#define CS4231_HW_INTERWAVE 0x1000 /* InterWave chip */
#define CS4231_HW_OPL3SA2 0x1101 /* OPL3-SA2 chip, similar to cs4231 */
+#define CS4231_HW_OPTI93X 0x1102 /* Opti 930/931/933 */
/* defines for codec.hwshare */
#define CS4231_HWSHARE_IRQ (1<<0)
@@ -120,6 +121,8 @@ unsigned char snd_cs4236_ext_in(struct snd_cs4231 *chip, unsigned char reg);
void snd_cs4231_mce_up(struct snd_cs4231 *chip);
void snd_cs4231_mce_down(struct snd_cs4231 *chip);
+void snd_cs4231_overrange(struct snd_cs4231 *chip);
+
irqreturn_t snd_cs4231_interrupt(int irq, void *dev_id);
const char *snd_cs4231_chip_id(struct snd_cs4231 *chip);
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index 7b7b9b13b4d..10ee28eac01 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -1670,6 +1670,7 @@ struct snd_emu_chip_details {
unsigned char spi_dac; /* SPI interface for DAC */
unsigned char i2c_adc; /* I2C interface for ADC */
unsigned char adc_1361t; /* Use Philips 1361T ADC */
+ unsigned char invert_shared_spdif; /* analog/digital switch inverted */
const char *driver;
const char *name;
const char *id; /* for backward compatibility - can be NULL if not needed */
diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h
index f023c1b97f8..3d9afb6a8c9 100644
--- a/include/sound/seq_kernel.h
+++ b/include/sound/seq_kernel.h
@@ -105,7 +105,7 @@ int snd_seq_event_port_attach(int client, struct snd_seq_port_callback *pcbp,
int cap, int type, int midi_channels, int midi_voices, char *portname);
int snd_seq_event_port_detach(int client, int port);
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
void snd_seq_autoload_lock(void);
void snd_seq_autoload_unlock(void);
#else
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index a105b01e06d..3030fdc6981 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -130,6 +130,13 @@
{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert}
+/* generic register modifier widget */
+#define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
+{ .id = wid, .name = wname, .kcontrols = NULL, .num_kcontrols = 0, \
+ .reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
+ .on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
+ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+
/* dapm kcontrol types */
#define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -193,6 +200,7 @@ struct snd_soc_dapm_widget;
enum snd_soc_dapm_type;
struct snd_soc_dapm_path;
struct snd_soc_dapm_pin;
+struct snd_soc_dapm_route;
/* dapm controls */
int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
@@ -205,25 +213,32 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_new_control(struct snd_soc_codec *codec,
const struct snd_soc_dapm_widget *widget);
+int snd_soc_dapm_new_controls(struct snd_soc_codec *codec,
+ const struct snd_soc_dapm_widget *widget,
+ int num);
/* dapm path setup */
-int snd_soc_dapm_connect_input(struct snd_soc_codec *codec,
+int __deprecated snd_soc_dapm_connect_input(struct snd_soc_codec *codec,
const char *sink_name, const char *control_name, const char *src_name);
int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec);
void snd_soc_dapm_free(struct snd_soc_device *socdev);
+int snd_soc_dapm_add_routes(struct snd_soc_codec *codec,
+ const struct snd_soc_dapm_route *route, int num);
/* dapm events */
int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
int event);
-int snd_soc_dapm_device_event(struct snd_soc_device *socdev, int event);
+int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
+ enum snd_soc_bias_level level);
/* dapm sys fs - used by the core */
int snd_soc_dapm_sys_add(struct device *dev);
-/* dapm audio endpoint control */
-int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec,
- char *pin, int status);
-int snd_soc_dapm_sync_endpoints(struct snd_soc_codec *codec);
+/* dapm audio pin control and status */
+int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin);
+int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin);
+int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin);
+int snd_soc_dapm_sync(struct snd_soc_codec *codec);
/* dapm widget types */
enum snd_soc_dapm_type {
@@ -245,6 +260,18 @@ enum snd_soc_dapm_type {
snd_soc_dapm_post, /* machine specific post widget - exec last */
};
+/*
+ * DAPM audio route definition.
+ *
+ * Defines an audio route originating at source via control and finishing
+ * at sink.
+ */
+struct snd_soc_dapm_route {
+ const char *sink;
+ const char *control;
+ const char *source;
+};
+
/* dapm audio path between two widgets */
struct snd_soc_dapm_path {
char *name;
@@ -277,6 +304,9 @@ struct snd_soc_dapm_widget {
unsigned char shift; /* bits to shift */
unsigned int saved_value; /* widget saved value */
unsigned int value; /* widget current value */
+ unsigned int mask; /* non-shifted mask */
+ unsigned int on_val; /* on state value */
+ unsigned int off_val; /* off state value */
unsigned char power:1; /* block power status */
unsigned char invert:1; /* invert the power bit */
unsigned char active:1; /* active stream on DAC, ADC's */
diff --git a/include/sound/soc.h b/include/sound/soc.h
index d3c8c033dff..1890d87c520 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -73,6 +73,15 @@
.get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
.private_value = (reg_left) | ((shift) << 8) | \
((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+#define SOC_DOUBLE_S8_TLV(xname, reg, min, max, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw_s8, .get = snd_soc_get_volsw_s8, \
+ .put = snd_soc_put_volsw_s8, \
+ .private_value = (reg) | (((signed char)max) << 16) | \
+ (((signed char)min) << 24) }
#define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xtexts) \
{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
.mask = xmask, .texts = xtexts }
@@ -91,6 +100,15 @@
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmask, xinvert) }
+#define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmask, xinvert,\
+ xhandler_get, xhandler_put, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmask, xinvert) }
#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_bool_ext, \
@@ -103,6 +121,24 @@
.private_value = (unsigned long)&xenum }
/*
+ * Bias levels
+ *
+ * @ON: Bias is fully on for audio playback and capture operations.
+ * @PREPARE: Prepare for audio operations. Called before DAPM switching for
+ * stream start and stop operations.
+ * @STANDBY: Low power standby state when no playback/capture operations are
+ * in progress. NOTE: The transition time between STANDBY and ON
+ * should be as fast as possible and no longer than 10ms.
+ * @OFF: Power Off. No restrictions on transition times.
+ */
+enum snd_soc_bias_level {
+ SND_SOC_BIAS_ON,
+ SND_SOC_BIAS_PREPARE,
+ SND_SOC_BIAS_STANDBY,
+ SND_SOC_BIAS_OFF,
+};
+
+/*
* Digital Audio Interface (DAI) types
*/
#define SND_SOC_DAI_AC97 0x1
@@ -185,8 +221,7 @@ struct snd_soc_pcm_stream;
struct snd_soc_ops;
struct snd_soc_dai_mode;
struct snd_soc_pcm_runtime;
-struct snd_soc_codec_dai;
-struct snd_soc_cpu_dai;
+struct snd_soc_dai;
struct snd_soc_codec;
struct snd_soc_machine_config;
struct soc_enum;
@@ -221,6 +256,27 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
struct snd_ac97_bus_ops *ops, int num);
void snd_soc_free_ac97_codec(struct snd_soc_codec *codec);
+/* Digital Audio Interface clocking API.*/
+int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir);
+
+int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
+ int div_id, int div);
+
+int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out);
+
+/* Digital Audio interface formatting */
+int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
+
+int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int mask, int slots);
+
+int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
+
+/* Digital Audio Interface mute */
+int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute);
+
/*
*Controls
*/
@@ -249,6 +305,12 @@ int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
+int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
/* SoC PCM stream information */
struct snd_soc_pcm_stream {
@@ -272,87 +334,45 @@ struct snd_soc_ops {
int (*trigger)(struct snd_pcm_substream *, int);
};
-/* ASoC codec DAI ops */
-struct snd_soc_codec_ops {
- /* codec DAI clocking configuration */
- int (*set_sysclk)(struct snd_soc_codec_dai *codec_dai,
+/* ASoC DAI ops */
+struct snd_soc_dai_ops {
+ /* DAI clocking configuration */
+ int (*set_sysclk)(struct snd_soc_dai *dai,
int clk_id, unsigned int freq, int dir);
- int (*set_pll)(struct snd_soc_codec_dai *codec_dai,
+ int (*set_pll)(struct snd_soc_dai *dai,
int pll_id, unsigned int freq_in, unsigned int freq_out);
- int (*set_clkdiv)(struct snd_soc_codec_dai *codec_dai,
- int div_id, int div);
+ int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
- /* CPU DAI format configuration */
- int (*set_fmt)(struct snd_soc_codec_dai *codec_dai,
- unsigned int fmt);
- int (*set_tdm_slot)(struct snd_soc_codec_dai *codec_dai,
+ /* DAI format configuration */
+ int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
+ int (*set_tdm_slot)(struct snd_soc_dai *dai,
unsigned int mask, int slots);
- int (*set_tristate)(struct snd_soc_codec_dai *, int tristate);
+ int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
/* digital mute */
- int (*digital_mute)(struct snd_soc_codec_dai *, int mute);
-};
-
-/* ASoC cpu DAI ops */
-struct snd_soc_cpu_ops {
- /* CPU DAI clocking configuration */
- int (*set_sysclk)(struct snd_soc_cpu_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir);
- int (*set_clkdiv)(struct snd_soc_cpu_dai *cpu_dai,
- int div_id, int div);
- int (*set_pll)(struct snd_soc_cpu_dai *cpu_dai,
- int pll_id, unsigned int freq_in, unsigned int freq_out);
-
- /* CPU DAI format configuration */
- int (*set_fmt)(struct snd_soc_cpu_dai *cpu_dai,
- unsigned int fmt);
- int (*set_tdm_slot)(struct snd_soc_cpu_dai *cpu_dai,
- unsigned int mask, int slots);
- int (*set_tristate)(struct snd_soc_cpu_dai *, int tristate);
-};
-
-/* SoC Codec DAI */
-struct snd_soc_codec_dai {
- char *name;
- int id;
- unsigned char type;
-
- /* DAI capabilities */
- struct snd_soc_pcm_stream playback;
- struct snd_soc_pcm_stream capture;
-
- /* DAI runtime info */
- struct snd_soc_codec *codec;
- unsigned int active;
- unsigned char pop_wait:1;
-
- /* ops */
- struct snd_soc_ops ops;
- struct snd_soc_codec_ops dai_ops;
-
- /* DAI private data */
- void *private_data;
+ int (*digital_mute)(struct snd_soc_dai *dai, int mute);
};
-/* SoC CPU DAI */
-struct snd_soc_cpu_dai {
-
+/* SoC DAI (Digital Audio Interface) */
+struct snd_soc_dai {
/* DAI description */
char *name;
unsigned int id;
unsigned char type;
/* DAI callbacks */
- int (*probe)(struct platform_device *pdev);
- void (*remove)(struct platform_device *pdev);
+ int (*probe)(struct platform_device *pdev,
+ struct snd_soc_dai *dai);
+ void (*remove)(struct platform_device *pdev,
+ struct snd_soc_dai *dai);
int (*suspend)(struct platform_device *pdev,
- struct snd_soc_cpu_dai *cpu_dai);
+ struct snd_soc_dai *dai);
int (*resume)(struct platform_device *pdev,
- struct snd_soc_cpu_dai *cpu_dai);
+ struct snd_soc_dai *dai);
/* ops */
struct snd_soc_ops ops;
- struct snd_soc_cpu_ops dai_ops;
+ struct snd_soc_dai_ops dai_ops;
/* DAI capabilities */
struct snd_soc_pcm_stream capture;
@@ -360,7 +380,9 @@ struct snd_soc_cpu_dai {
/* DAI runtime info */
struct snd_pcm_runtime *runtime;
- unsigned char active:1;
+ struct snd_soc_codec *codec;
+ unsigned int active;
+ unsigned char pop_wait:1;
void *dma_data;
/* DAI private data */
@@ -374,7 +396,8 @@ struct snd_soc_codec {
struct mutex mutex;
/* callbacks */
- int (*dapm_event)(struct snd_soc_codec *codec, int event);
+ int (*set_bias_level)(struct snd_soc_codec *,
+ enum snd_soc_bias_level level);
/* runtime */
struct snd_card *card;
@@ -396,12 +419,12 @@ struct snd_soc_codec {
/* dapm */
struct list_head dapm_widgets;
struct list_head dapm_paths;
- unsigned int dapm_state;
- unsigned int suspend_dapm_state;
+ enum snd_soc_bias_level bias_level;
+ enum snd_soc_bias_level suspend_bias_level;
struct delayed_work delayed_work;
/* codec DAI's */
- struct snd_soc_codec_dai *dai;
+ struct snd_soc_dai *dai;
unsigned int num_dai;
};
@@ -420,12 +443,12 @@ struct snd_soc_platform {
int (*probe)(struct platform_device *pdev);
int (*remove)(struct platform_device *pdev);
int (*suspend)(struct platform_device *pdev,
- struct snd_soc_cpu_dai *cpu_dai);
+ struct snd_soc_dai *dai);
int (*resume)(struct platform_device *pdev,
- struct snd_soc_cpu_dai *cpu_dai);
+ struct snd_soc_dai *dai);
/* pcm creation and destruction */
- int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *,
+ int (*pcm_new)(struct snd_card *, struct snd_soc_dai *,
struct snd_pcm *);
void (*pcm_free)(struct snd_pcm *);
@@ -439,8 +462,8 @@ struct snd_soc_dai_link {
char *stream_name; /* Stream name */
/* DAI */
- struct snd_soc_codec_dai *codec_dai;
- struct snd_soc_cpu_dai *cpu_dai;
+ struct snd_soc_dai *codec_dai;
+ struct snd_soc_dai *cpu_dai;
/* machine stream operations */
struct snd_soc_ops *ops;
@@ -467,7 +490,8 @@ struct snd_soc_machine {
int (*resume_post)(struct platform_device *pdev);
/* callbacks */
- int (*dapm_event)(struct snd_soc_machine *, int event);
+ int (*set_bias_level)(struct snd_soc_machine *,
+ enum snd_soc_bias_level level);
/* CPU <--> Codec DAI links */
struct snd_soc_dai_link *dai_link;
@@ -482,6 +506,7 @@ struct snd_soc_device {
struct snd_soc_codec *codec;
struct snd_soc_codec_device *codec_dev;
struct delayed_work delayed_work;
+ struct work_struct deferred_resume_work;
void *codec_data;
};
diff --git a/include/sound/uda1341.h b/include/sound/uda1341.h
index 2e564bfb37f..110d5dc3a2b 100644
--- a/include/sound/uda1341.h
+++ b/include/sound/uda1341.h
@@ -15,8 +15,6 @@
* features support
*/
-/* $Id: uda1341.h,v 1.8 2005/11/17 14:17:21 tiwai Exp $ */
-
#define UDA1341_ALSA_NAME "snd-uda1341"
/*
diff --git a/include/sound/version.h b/include/sound/version.h
index ed6fb2eb1ea..6b78aff273a 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
-/* include/version.h. Generated by alsa/ksync script. */
-#define CONFIG_SND_VERSION "1.0.16"
+/* include/version.h */
+#define CONFIG_SND_VERSION "1.0.17"
#define CONFIG_SND_DATE ""
diff --git a/include/xen/events.h b/include/xen/events.h
index acd8e062c85..67c4436554a 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -32,6 +32,7 @@ void unbind_from_irqhandler(unsigned int irq, void *dev_id);
void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector);
int resend_irq_on_evtchn(unsigned int irq);
+void rebind_evtchn_irq(int evtchn, int irq);
static inline void notify_remote_via_evtchn(int port)
{
@@ -40,4 +41,7 @@ static inline void notify_remote_via_evtchn(int port)
}
extern void notify_remote_via_irq(int irq);
+
+extern void xen_irq_resume(void);
+
#endif /* _XEN_EVENTS_H */
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index 46620484612..a40f1cd91be 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -51,6 +51,9 @@ struct gnttab_free_callback {
u16 count;
};
+int gnttab_suspend(void);
+int gnttab_resume(void);
+
int gnttab_grant_foreign_access(domid_t domid, unsigned long frame,
int readonly);
diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h
index 21c0ecfd786..98b79bc404d 100644
--- a/include/xen/hvc-console.h
+++ b/include/xen/hvc-console.h
@@ -3,4 +3,13 @@
extern struct console xenboot_console;
+#ifdef CONFIG_HVC_XEN
+void xen_console_resume(void);
+#else
+static inline void xen_console_resume(void) { }
+#endif
+
+void xen_raw_console_write(const char *str);
+void xen_raw_printk(const char *fmt, ...);
+
#endif /* XEN_HVC_CONSOLE_H */
diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h
index a64d3df5bd9..7a8262c375c 100644
--- a/include/xen/interface/elfnote.h
+++ b/include/xen/interface/elfnote.h
@@ -120,6 +120,26 @@
*/
#define XEN_ELFNOTE_BSD_SYMTAB 11
+/*
+ * The lowest address the hypervisor hole can begin at (numeric).
+ *
+ * This must not be set higher than HYPERVISOR_VIRT_START. Its presence
+ * also indicates to the hypervisor that the kernel can deal with the
+ * hole starting at a higher address.
+ */
+#define XEN_ELFNOTE_HV_START_LOW 12
+
+/*
+ * List of maddr_t-sized mask/value pairs describing how to recognize
+ * (non-present) L1 page table entries carrying valid MFNs (numeric).
+ */
+#define XEN_ELFNOTE_L1_MFN_VALID 13
+
+/*
+ * Whether or not the guest supports cooperative suspend cancellation.
+ */
+#define XEN_ELFNOTE_SUSPEND_CANCEL 14
+
#endif /* __XEN_PUBLIC_ELFNOTE_H__ */
/*
diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h
index d73228d1648..f51b6413b05 100644
--- a/include/xen/interface/features.h
+++ b/include/xen/interface/features.h
@@ -38,6 +38,9 @@
*/
#define XENFEAT_pae_pgdir_above_4gb 4
+/* x86: Does this Xen host support the MMU_PT_UPDATE_PRESERVE_AD hypercall? */
+#define XENFEAT_mmu_pt_update_preserve_ad 5
+
#define XENFEAT_NR_SUBMAPS 1
#endif /* __XEN_PUBLIC_FEATURES_H__ */
diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h
index 5a934dd7796..974a51ed916 100644
--- a/include/xen/interface/io/fbif.h
+++ b/include/xen/interface/io/fbif.h
@@ -49,11 +49,27 @@ struct xenfb_update {
int32_t height; /* rect height */
};
+/*
+ * Framebuffer resize notification event
+ * Capable backend sets feature-resize in xenstore.
+ */
+#define XENFB_TYPE_RESIZE 3
+
+struct xenfb_resize {
+ uint8_t type; /* XENFB_TYPE_RESIZE */
+ int32_t width; /* width in pixels */
+ int32_t height; /* height in pixels */
+ int32_t stride; /* stride in bytes */
+ int32_t depth; /* depth in bits */
+ int32_t offset; /* start offset within framebuffer */
+};
+
#define XENFB_OUT_EVENT_SIZE 40
union xenfb_out_event {
uint8_t type;
struct xenfb_update update;
+ struct xenfb_resize resize;
char pad[XENFB_OUT_EVENT_SIZE];
};
@@ -105,15 +121,18 @@ struct xenfb_page {
* Each directory page holds PAGE_SIZE / sizeof(*pd)
* framebuffer pages, and can thus map up to PAGE_SIZE *
* PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and
- * sizeof(unsigned long) == 4, that's 4 Megs. Two directory
- * pages should be enough for a while.
+ * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2
+ * Megs 64 bit. 256 directories give enough room for a 512
+ * Meg framebuffer with a max resolution of 12,800x10,240.
+ * Should be enough for a while with room leftover for
+ * expansion.
*/
- unsigned long pd[2];
+ unsigned long pd[256];
};
/*
- * Wart: xenkbd needs to know resolution. Put it here until a better
- * solution is found, but don't leak it to the backend.
+ * Wart: xenkbd needs to know default resolution. Put it here until a
+ * better solution is found, but don't leak it to the backend.
*/
#ifdef __KERNEL__
#define XENFB_WIDTH 800
diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h
index fb97f4284ff..8066c7849fb 100644
--- a/include/xen/interface/io/kbdif.h
+++ b/include/xen/interface/io/kbdif.h
@@ -49,6 +49,7 @@ struct xenkbd_motion {
uint8_t type; /* XENKBD_TYPE_MOTION */
int32_t rel_x; /* relative X motion */
int32_t rel_y; /* relative Y motion */
+ int32_t rel_z; /* relative Z motion (wheel) */
};
struct xenkbd_key {
@@ -61,6 +62,7 @@ struct xenkbd_position {
uint8_t type; /* XENKBD_TYPE_POS */
int32_t abs_x; /* absolute X position (in FB pixels) */
int32_t abs_y; /* absolute Y position (in FB pixels) */
+ int32_t rel_z; /* relative Z motion (wheel) */
};
#define XENKBD_IN_EVENT_SIZE 40
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index da768469aa9..af36ead1681 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -29,7 +29,7 @@ struct xen_memory_reservation {
* OUT: GMFN bases of extents that were allocated
* (NB. This command also updates the mach_to_phys translation table)
*/
- ulong extent_start;
+ GUEST_HANDLE(ulong) extent_start;
/* Number of extents, and size/alignment of each (2^extent_order pages). */
unsigned long nr_extents;
@@ -50,6 +50,7 @@ struct xen_memory_reservation {
domid_t domid;
};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
/*
* Returns the maximum machine frame number of mapped RAM in this system.
@@ -85,7 +86,7 @@ struct xen_machphys_mfn_list {
* any large discontiguities in the machine address space, 2MB gaps in
* the machphys table will be represented by an MFN base of zero.
*/
- ulong extent_start;
+ GUEST_HANDLE(ulong) extent_start;
/*
* Number of extents written to the above array. This will be smaller
@@ -93,6 +94,7 @@ struct xen_machphys_mfn_list {
*/
unsigned int nr_extents;
};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
/*
* Sets the GPFN at which a particular page appears in the specified guest's
@@ -115,6 +117,7 @@ struct xen_add_to_physmap {
/* GPFN where the source mapping page should appear. */
unsigned long gpfn;
};
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
/*
* Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
@@ -129,13 +132,14 @@ struct xen_translate_gpfn_list {
unsigned long nr_gpfns;
/* List of GPFNs to translate. */
- ulong gpfn_list;
+ GUEST_HANDLE(ulong) gpfn_list;
/*
* Output list to contain MFN translations. May be the same as the input
* list (in which case each input GPFN is overwritten with the output MFN).
*/
- ulong mfn_list;
+ GUEST_HANDLE(ulong) mfn_list;
};
+DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
#endif /* __XEN_PUBLIC_MEMORY_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 819a0331cda..2befa3e2f1b 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -114,9 +114,14 @@
* ptr[:2] -- Machine address within the frame whose mapping to modify.
* The frame must belong to the FD, if one is specified.
* val -- Value to write into the mapping entry.
+ *
+ * ptr[1:0] == MMU_PT_UPDATE_PRESERVE_AD:
+ * As MMU_NORMAL_PT_UPDATE above, but A/D bits currently in the PTE are ORed
+ * with those in @val.
*/
-#define MMU_NORMAL_PT_UPDATE 0 /* checked '*ptr = val'. ptr is MA. */
-#define MMU_MACHPHYS_UPDATE 1 /* ptr = MA of frame to modify entry for */
+#define MMU_NORMAL_PT_UPDATE 0 /* checked '*ptr = val'. ptr is MA. */
+#define MMU_MACHPHYS_UPDATE 1 /* ptr = MA of frame to modify entry for */
+#define MMU_PT_UPDATE_PRESERVE_AD 2 /* atomically: *ptr = val | (*ptr&(A|D)) */
/*
* MMU EXTENDED OPERATIONS
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index 10ddfe0142d..a706d6a7896 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -5,4 +5,10 @@
DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
+void xen_pre_suspend(void);
+void xen_post_suspend(int suspend_cancelled);
+
+void xen_mm_pin_all(void);
+void xen_mm_unpin_all(void);
+
#endif /* INCLUDE_XEN_OPS_H */