diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ata.h | 11 | ||||
| -rw-r--r-- | include/linux/libata.h | 29 |
2 files changed, 26 insertions, 14 deletions
diff --git a/include/linux/ata.h b/include/linux/ata.h index d2873b732bb..f512104a1a3 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -192,6 +192,7 @@ enum { ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ + ATA_TFLAG_POLLING = (1 << 5), /* set nIEN to 1 and use polling */ }; enum ata_tf_protocols { @@ -261,6 +262,8 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command @@ -290,6 +293,14 @@ static inline int is_atapi_taskfile(const struct ata_taskfile *tf) (tf->protocol == ATA_PROT_ATAPI_DMA); } +static inline int is_multi_taskfile(struct ata_taskfile *tf) +{ + return (tf->command == ATA_CMD_READ_MULTI) || + (tf->command == ATA_CMD_WRITE_MULTI) || + (tf->command == ATA_CMD_READ_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_EXT); +} + static inline int ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) diff --git a/include/linux/libata.h b/include/linux/libata.h index 83a83babff8..2929282beb4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -101,6 +101,7 @@ enum { ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */ ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */ + ATA_DFLAG_CDB_INTR = (1 << 4), /* device asserts INTRQ when ready for CDB */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -119,8 +120,8 @@ enum { ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */ ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ - ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once - * proper HSM is in place. */ + ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD + * doesn't handle PIO interrupts */ ATA_FLAG_DEBUGMSG = (1 << 10), ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ @@ -133,8 +134,8 @@ enum { ATA_TMOUT_PIO = 30 * HZ, ATA_TMOUT_BOOT = 30 * HZ, /* hueristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* hueristic */ - ATA_TMOUT_CDB = 30 * HZ, - ATA_TMOUT_CDB_QUICK = 5 * HZ, + ATA_TMOUT_DATAOUT = 30 * HZ, + ATA_TMOUT_DATAOUT_QUICK = 5 * HZ, /* ATA bus states */ BUS_UNKNOWN = 0, @@ -170,14 +171,16 @@ enum { }; enum hsm_task_states { - HSM_ST_UNKNOWN, - HSM_ST_IDLE, - HSM_ST_POLL, - HSM_ST_TMOUT, - HSM_ST, - HSM_ST_LAST, - HSM_ST_LAST_POLL, - HSM_ST_ERR, + HSM_ST_UNKNOWN, /* state unknown */ + HSM_ST_IDLE, /* no command on going */ + HSM_ST_POLL, /* same as HSM_ST, waits longer */ + HSM_ST_TMOUT, /* timeout */ + HSM_ST, /* (waiting the device to) transfer data */ + HSM_ST_LAST, /* (waiting the device to) complete command */ + HSM_ST_LAST_POLL, /* same as HSM_ST_LAST, waits longer */ + HSM_ST_ERR, /* error */ + HSM_ST_FIRST, /* (waiting the device to) + write CDB or first data block */ }; enum ata_completion_errors { @@ -345,8 +348,6 @@ struct ata_port { struct ata_host_stats stats; struct ata_host_set *host_set; - struct work_struct packet_task; - struct work_struct pio_task; unsigned int hsm_task_state; unsigned long pio_task_timeout; |