aboutsummaryrefslogtreecommitdiff
path: root/init
diff options
context:
space:
mode:
Diffstat (limited to 'init')
-rw-r--r--init/Kconfig260
1 files changed, 132 insertions, 128 deletions
diff --git a/init/Kconfig b/init/Kconfig
index a724a149bf3..a90fcbeeb9d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -238,6 +238,98 @@ config AUDIT_TREE
def_bool y
depends on AUDITSYSCALL && INOTIFY
+menu "RCU Subsystem"
+
+choice
+ prompt "RCU Implementation"
+ default CLASSIC_RCU
+
+config CLASSIC_RCU
+ bool "Classic RCU"
+ help
+ This option selects the classic RCU implementation that is
+ designed for best read-side performance on non-realtime
+ systems.
+
+ Select this option if you are unsure.
+
+config TREE_RCU
+ bool "Tree-based hierarchical RCU"
+ help
+ This option selects the RCU implementation that is
+ designed for very large SMP system with hundreds or
+ thousands of CPUs.
+
+config PREEMPT_RCU
+ bool "Preemptible RCU"
+ depends on PREEMPT
+ help
+ This option reduces the latency of the kernel by making certain
+ RCU sections preemptible. Normally RCU code is non-preemptible, if
+ this option is selected then read-only RCU sections become
+ preemptible. This helps latency, but may expose bugs due to
+ now-naive assumptions about each RCU read-side critical section
+ remaining on a given CPU through its execution.
+
+endchoice
+
+config RCU_TRACE
+ bool "Enable tracing for RCU"
+ depends on TREE_RCU || PREEMPT_RCU
+ help
+ This option provides tracing in RCU which presents stats
+ in debugfs for debugging RCU implementation.
+
+ Say Y here if you want to enable RCU tracing
+ Say N if you are unsure.
+
+config RCU_FANOUT
+ int "Tree-based hierarchical RCU fanout value"
+ range 2 64 if 64BIT
+ range 2 32 if !64BIT
+ depends on TREE_RCU
+ default 64 if 64BIT
+ default 32 if !64BIT
+ help
+ This option controls the fanout of hierarchical implementations
+ of RCU, allowing RCU to work efficiently on machines with
+ large numbers of CPUs. This value must be at least the cube
+ root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
+ systems and up to 262,144 for 64-bit systems.
+
+ Select a specific number if testing RCU itself.
+ Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+ bool "Disable tree-based hierarchical RCU auto-balancing"
+ depends on TREE_RCU
+ default n
+ help
+ This option forces use of the exact RCU_FANOUT value specified,
+ regardless of imbalances in the hierarchy. This is useful for
+ testing RCU itself, and might one day be useful on systems with
+ strong NUMA behavior.
+
+ Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+ Say N if unsure.
+
+config TREE_RCU_TRACE
+ def_bool RCU_TRACE && TREE_RCU
+ select DEBUG_FS
+ help
+ This option provides tracing for the TREE_RCU implementation,
+ permitting Makefile to trivially select kernel/rcutree_trace.c.
+
+config PREEMPT_RCU_TRACE
+ def_bool RCU_TRACE && PREEMPT_RCU
+ select DEBUG_FS
+ help
+ This option provides tracing for the PREEMPT_RCU implementation,
+ permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+
+endmenu # "RCU Subsystem"
+
config IKCONFIG
tristate "Kernel .config support"
---help---
@@ -323,26 +415,26 @@ config CGROUP_SCHED
This option allows you to create arbitrary task groups
using the "cgroup" pseudo filesystem and control
the cpu bandwidth allocated to each such task group.
- Refer to Documentation/cgroups.txt for more information
- on "cgroup" pseudo filesystem.
+ Refer to Documentation/cgroups/cgroups.txt for more
+ information on "cgroup" pseudo filesystem.
endchoice
-menu "Control Group support"
-config CGROUPS
- bool "Control Group support"
+menuconfig CGROUPS
+ boolean "Control Group support"
help
- This option add support for grouping sets of processes together, for
+ This option adds support for grouping sets of processes together, for
use with process control subsystems such as Cpusets, CFS, memory
controls or device isolation.
See
- - Documentation/cpusets.txt (Cpusets)
- Documentation/scheduler/sched-design-CFS.txt (CFS)
- - Documentation/cgroups/ (features for grouping, isolation)
- - Documentation/controllers/ (features for resource control)
+ - Documentation/cgroups/ (features for grouping, isolation
+ and resource control)
Say N if unsure.
+if CGROUPS
+
config CGROUP_DEBUG
bool "Example debug cgroup subsystem"
depends on CGROUPS
@@ -350,24 +442,24 @@ config CGROUP_DEBUG
help
This option enables a simple cgroup subsystem that
exports useful debugging information about the cgroups
- framework
+ framework.
- Say N if unsure
+ Say N if unsure.
config CGROUP_NS
- bool "Namespace cgroup subsystem"
- depends on CGROUPS
- help
- Provides a simple namespace cgroup subsystem to
- provide hierarchical naming of sets of namespaces,
- for instance virtual servers and checkpoint/restart
- jobs.
+ bool "Namespace cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a simple namespace cgroup subsystem to
+ provide hierarchical naming of sets of namespaces,
+ for instance virtual servers and checkpoint/restart
+ jobs.
config CGROUP_FREEZER
- bool "control group freezer subsystem"
- depends on CGROUPS
- help
- Provides a way to freeze and unfreeze all tasks in a
+ bool "Freezer cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a way to freeze and unfreeze all tasks in a
cgroup.
config CGROUP_DEVICE
@@ -388,18 +480,23 @@ config CPUSETS
Say N if unsure.
+config PROC_PID_CPUSET
+ bool "Include legacy /proc/<pid>/cpuset file"
+ depends on CPUSETS
+ default y
+
config CGROUP_CPUACCT
bool "Simple CPU accounting cgroup subsystem"
depends on CGROUPS
help
Provides a simple Resource Controller for monitoring the
- total CPU consumed by the tasks in a cgroup
+ total CPU consumed by the tasks in a cgroup.
config RESOURCE_COUNTERS
bool "Resource counters"
help
This option enables controller independent resource accounting
- infrastructure that works with cgroups
+ infrastructure that works with cgroups.
depends on CGROUPS
config CGROUP_MEM_RES_CTLR
@@ -425,9 +522,6 @@ config CGROUP_MEM_RES_CTLR
This config option also selects MM_OWNER config option, which
could in turn add some fork/exit overhead.
-config MM_OWNER
- bool
-
config CGROUP_MEM_RES_CTLR_SWAP
bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
@@ -444,8 +538,10 @@ config CGROUP_MEM_RES_CTLR_SWAP
there will be no overhead from this. Even when you set this config=y,
if boot option "noswapaccount" is set, swap will not be accounted.
+endif # CGROUPS
-endmenu
+config MM_OWNER
+ bool
config SYSFS_DEPRECATED
bool
@@ -483,11 +579,6 @@ config SYSFS_DEPRECATED_V2
if the original kernel, that came with your distribution, has
this option set to N.
-config PROC_PID_CPUSET
- bool "Include legacy /proc/<pid>/cpuset file"
- depends on CPUSETS
- default y
-
config RELAY
bool "Kernel->user space relay support (formerly relayfs)"
help
@@ -542,6 +633,14 @@ config PID_NS
Unless you want to work with an experimental feature
say N here.
+config NET_NS
+ bool "Network namespace"
+ default n
+ depends on NAMESPACES && EXPERIMENTAL && NET
+ help
+ Allow user space to create what appear to be multiple instances
+ of the network stack.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
@@ -626,13 +725,6 @@ config KALLSYMS_ALL
Say N.
-config KALLSYMS_STRIP_GENERATED
- bool "Strip machine generated symbols from kallsyms"
- depends on KALLSYMS_ALL
- default y
- help
- Say N if you want kallsyms to retain even machine generated symbols.
-
config KALLSYMS_EXTRA_PASS
bool "Do an extra kallsyms pass"
depends on KALLSYMS
@@ -874,7 +966,6 @@ config SLABINFO
config RT_MUTEXES
boolean
- select PLIST
config BASE_SMALL
int
@@ -973,90 +1064,3 @@ source "block/Kconfig"
config PREEMPT_NOTIFIERS
bool
-choice
- prompt "RCU Implementation"
- default CLASSIC_RCU
-
-config CLASSIC_RCU
- bool "Classic RCU"
- help
- This option selects the classic RCU implementation that is
- designed for best read-side performance on non-realtime
- systems.
-
- Select this option if you are unsure.
-
-config TREE_RCU
- bool "Tree-based hierarchical RCU"
- help
- This option selects the RCU implementation that is
- designed for very large SMP system with hundreds or
- thousands of CPUs.
-
-config PREEMPT_RCU
- bool "Preemptible RCU"
- depends on PREEMPT
- help
- This option reduces the latency of the kernel by making certain
- RCU sections preemptible. Normally RCU code is non-preemptible, if
- this option is selected then read-only RCU sections become
- preemptible. This helps latency, but may expose bugs due to
- now-naive assumptions about each RCU read-side critical section
- remaining on a given CPU through its execution.
-
-endchoice
-
-config RCU_TRACE
- bool "Enable tracing for RCU"
- depends on TREE_RCU || PREEMPT_RCU
- help
- This option provides tracing in RCU which presents stats
- in debugfs for debugging RCU implementation.
-
- Say Y here if you want to enable RCU tracing
- Say N if you are unsure.
-
-config RCU_FANOUT
- int "Tree-based hierarchical RCU fanout value"
- range 2 64 if 64BIT
- range 2 32 if !64BIT
- depends on TREE_RCU
- default 64 if 64BIT
- default 32 if !64BIT
- help
- This option controls the fanout of hierarchical implementations
- of RCU, allowing RCU to work efficiently on machines with
- large numbers of CPUs. This value must be at least the cube
- root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
- systems and up to 262,144 for 64-bit systems.
-
- Select a specific number if testing RCU itself.
- Take the default if unsure.
-
-config RCU_FANOUT_EXACT
- bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU
- default n
- help
- This option forces use of the exact RCU_FANOUT value specified,
- regardless of imbalances in the hierarchy. This is useful for
- testing RCU itself, and might one day be useful on systems with
- strong NUMA behavior.
-
- Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
-
- Say N if unsure.
-
-config TREE_RCU_TRACE
- def_bool RCU_TRACE && TREE_RCU
- select DEBUG_FS
- help
- This option provides tracing for the TREE_RCU implementation,
- permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
- def_bool RCU_TRACE && PREEMPT_RCU
- select DEBUG_FS
- help
- This option provides tracing for the PREEMPT_RCU implementation,
- permitting Makefile to trivially select kernel/rcupreempt_trace.c.