aboutsummaryrefslogtreecommitdiff
path: root/sound/oss/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss/Kconfig')
-rw-r--r--sound/oss/Kconfig336
1 files changed, 5 insertions, 331 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 88e52dc84c0..f1ed710a18d 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,23 +5,9 @@
#
# Prompt user for primary drivers.
-config OBSOLETE_OSS_DRIVER
- bool "Obsolete OSS drivers"
- depends on SOUND_PRIME
- help
- This option enables support for obsolete OSS drivers that
- are scheduled for removal in the near future since there
- are ALSA drivers for the same hardware.
-
- Please contact Adrian Bunk <bunk@stusta.de> if you had to
- say Y here because your soundcard is not properly supported
- by ALSA.
-
- If unsure, say N.
-
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -35,48 +21,9 @@ config SOUND_BT878
To compile this driver as a module, choose M here: the module will
be called btaudio.
-config SOUND_CMPCI
- tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8738 chipset. Data on these chips are available at
- <http://www.cmedia.com.tw/>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
- bool "Enable legacy FM"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy FM (frequency-modulation) synthesizer
- support on a card using the CMI8338 or CMI8378 chipset. Even it is
- enabled, you need to set fmio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
- bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
- card using the CMI8338 or CMI8378 chipset. Even it is enabled,
- you need to set mpuio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
- bool "Enable joystick"
- depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
- help
- Say Y here in order to enable the joystick port on a sound card using
- the CMI8338 or the CMI8738 chipset. You need to config the
- gameport support and set joystick parameter as 1 to use it.
- Say N here if you don't need this.
-
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -108,13 +55,6 @@ config SOUND_FUSION
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
-config SOUND_CS4281
- tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Picture and feature list at
- <http://www.pcbroker.com/crystal4281.html>.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
@@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1370
- tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
- out if your sound card uses an ES1370 without removing your
- computer's cover, use lspci -n and look for the PCI ID
- 1274:5000. Since Ensoniq was bought by Creative Labs,
- Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
- This driver differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1370>.
-
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -151,33 +78,6 @@ config SOUND_ES1371
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
-config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the ESS Technology
- Solo1 chip. To find out if your sound card uses a
- Solo1 chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 125D:1969. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
- tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro line
- of PCI sound chips. These include the Maestro 1, Maestro 2, and
- Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
- details.
-
-config SOUND_MAESTRO3
- tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro 3
- PCI sound chip.
-
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI
@@ -185,24 +85,6 @@ config SOUND_ICH
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
-config SOUND_HARMONY
- tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
- help
- Say 'Y' or 'M' to include support for Harmony soundchip
- on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
- tristate "S3 SonicVibes"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the S3
- SonicVibes chipset. To find out if your sound card uses a
- SonicVibes chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 5333:CA00. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/sonicvibes>.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
@@ -231,10 +113,6 @@ config SOUND_VRC5477
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
-config SOUND_AU1000
- tristate "Au1000 Sound"
- depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
-
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
depends on SOUND_PRIME && SOC_AU1550
@@ -505,26 +383,6 @@ config MSND_FIFOSIZE
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
-config SOUND_VIA82CXXX
- tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y here to include support for the audio codec found on VIA
- 82Cxxx-based chips. Typically these are built into a motherboard.
-
- DO NOT select Sound Blaster or Adlib with this driver, unless
- you have a Sound Blaster or Adlib card in addition to your VIA
- audio chip.
-
-config MIDI_VIA82CXXX
- bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX && ISA_DMA_API
- help
- Answer Y to use the MIDI interface of the Via686. You may need to
- enable this in the BIOS before it will work. This is for connection
- to external MIDI hardware, and is not required for software playback
- of MIDI files.
-
config SOUND_OSS
tristate "OSS sound modules"
depends on SOUND_PRIME && ISA_DMA_API
@@ -576,18 +434,6 @@ config SOUND_AD1889
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
-config SOUND_SGALAXY
- tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- This module initializes the older non Plug and Play sound galaxy
- cards from Aztech. It supports the Waverider Pro 32 - 3D and the
- Galaxy Washington 16.
-
- If you compile the driver into the kernel, you have to add
- "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
- line.
-
config SOUND_ADLIB
tristate "Adlib Cards"
depends on SOUND_OSS
@@ -612,56 +458,6 @@ config SOUND_ACI_MIXER
This driver is also available as a module and will be called aci.
-config SOUND_CS4232
- tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a card based on the Crystal CS4232 chip set,
- which uses its own Plug and Play protocol.
-
- If you compile the driver into the kernel, you have to add
- "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
- See <file:Documentation/sound/oss/CS4232> for more information on
- configuring this card.
-
-config SOUND_SSCAPE
- tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Answer Y if you have a sound card based on the Ensoniq SoundScape
- chipset. Such cards are being manufactured at least by Ensoniq, Spea
- and Reveal (Reveal makes also other cards).
-
- If you compile the driver into the kernel, you have to add
- "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
- line.
-
-config SOUND_GUS
- tristate "Gravis Ultrasound support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here for any type of Gravis Ultrasound card, including the GUS
- or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
- information on configuring this card with modules.
-
- If you compile the driver into the kernel, you have to add
- "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
- bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
- sampling at 16-bit width.
-
-config SOUND_GUSMAX
- bool "GUS MAX support"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound MAX.
-
config SOUND_VMIDI
tristate "Loopback MIDI device support"
depends on SOUND_OSS
@@ -742,7 +538,7 @@ config SOUND_MPU401
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
@@ -752,35 +548,6 @@ config SOUND_NM256
See <file:Documentation/sound/oss/NM256> for further information.
-config SOUND_MAD16
- tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- ---help---
- Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
- 82C928 or 82C929 or 82C931) audio interface chip. These chips are
- quite common so it's possible that many no-name cards have one of
- them. In addition the MAD16 chip is used in some cards made by known
- manufacturers such as Turtle Beach (Tropez), Reveal (some models)
- and Diamond (latest ones). Note however that the Tropez sound cards
- have their own driver; if you have one of those, say N here and Y or
- M to "Full support for Turtle Beach WaveFront", below.
-
- If you compile the driver into the kernel, you have to add
- "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
- kernel command line.
-
- See also <file:Documentation/sound/oss/Opti> and
- <file:Documentation/sound/oss/MAD16> for more information on setting
- these cards up as modules.
-
-config MAD16_OLDCARD
- bool "Support MIDI in older MAD16 based cards (requires SB)"
- depends on SOUND_MAD16
- help
- Answer Y (or M) if you have an older card based on the C928 or
- Mozart chipset and you want to have MIDI support. If you enable this
- option you also need to enable support for Sound Blaster.
-
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
@@ -873,53 +640,9 @@ config SOUND_SB
You can say M here to compile this driver as a module; the module is
called sb.
-config SOUND_AWE32_SYNTH
- tristate "AWE32 synth"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
- similar sound card. See <file:Documentation/sound/oss/README.awe>,
- <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
- mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
- for more info.
-
-config SOUND_WAVEFRONT
- tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
- help
- Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
- and read the files <file:Documentation/sound/oss/Wavefront> and
- <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
- tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
- sound card.
-
- If you compile the driver into the kernel, you have to add
- "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
- bool "Have OSWF.MOT firmware file"
- depends on SOUND_MAUI=y && !STANDALONE
- help
- Turtle Beach Maui and Tropez sound cards have a microcontroller
- which needs to be initialized prior to use. OSWF.MOT is a file
- distributed with the card's DOS/Windows drivers. Answer Y if you
- have this file.
-
-config MAUI_BOOT_FILE
- string "Full pathname of OSWF.MOT firmware file"
- depends on MAUI_HAVE_BOOT
- default "/etc/sound/oswf.mot"
- help
- Enter the full pathname of your OSWF.MOT file, starting from /.
-
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
@@ -933,18 +656,6 @@ config SOUND_YM3812
If unsure, say Y.
-config SOUND_OPL3SA1
- tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
- usually built into motherboards. Read
- <file:Documentation/sound/oss/OPL3-SA> for details.
-
- If you compile the driver into the kernel, you have to add
- "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
depends on SOUND_OSS
@@ -959,19 +670,6 @@ config SOUND_OPL3SA2
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
-config SOUND_YMFPCI
- tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
- help
- Support for Yamaha cards including the YMF711, YMF715, YMF718,
- YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
- bool "Yamaha PCI legacy ports support"
- depends on SOUND_YMFPCI
- help
- Support for YMF7xx PCI cards emulating an MP401.
-
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
@@ -1101,30 +799,6 @@ config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
-config SOUND_ALI5455
- tristate "ALi5455 audio support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-
-config SOUND_FORTE
- tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you want driver support for the ForteMedia FM801 PCI
- audio controller (Abit AU10, Genius Sound Maker, HP Workstation
- zx2000, and others).
-
-config SOUND_RME96XX
- tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to access advanced
- features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
- tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
-
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
depends on SOUND_PRIME && CPU_SH3