diff options
Diffstat (limited to 'sound/oss/Kconfig')
| -rw-r--r-- | sound/oss/Kconfig | 336 |
1 files changed, 5 insertions, 331 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 88e52dc84c0..f1ed710a18d 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -5,23 +5,9 @@ # # Prompt user for primary drivers. -config OBSOLETE_OSS_DRIVER - bool "Obsolete OSS drivers" - depends on SOUND_PRIME - help - This option enables support for obsolete OSS drivers that - are scheduled for removal in the near future since there - are ALSA drivers for the same hardware. - - Please contact Adrian Bunk <bunk@stusta.de> if you had to - say Y here because your soundcard is not properly supported - by ALSA. - - If unsure, say N. - config SOUND_BT878 tristate "BT878 audio dma" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER + depends on SOUND_PRIME && PCI ---help--- Audio DMA support for bt878 based grabber boards. As you might have already noticed, bt878 is listed with two functions in /proc/pci. @@ -35,48 +21,9 @@ config SOUND_BT878 To compile this driver as a module, choose M here: the module will be called btaudio. -config SOUND_CMPCI - tristate "C-Media PCI (CMI8338/8738)" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a PCI sound card using the CMI8338 - or the CMI8738 chipset. Data on these chips are available at - <http://www.cmedia.com.tw/>. - - A userspace utility to control some internal registers of these - chips is available at - <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>. - -config SOUND_CMPCI_FM - bool "Enable legacy FM" - depends on SOUND_CMPCI && X86 - help - Say Y here to enable the legacy FM (frequency-modulation) synthesizer - support on a card using the CMI8338 or CMI8378 chipset. Even it is - enabled, you need to set fmio as proper value to enable it. - Say N here if you don't need this. - -config SOUND_CMPCI_MIDI - bool "Enable legacy MPU-401" - depends on SOUND_CMPCI && X86 - help - Say Y here to enable the legacy MPU401 MIDI synthesizer support on a - card using the CMI8338 or CMI8378 chipset. Even it is enabled, - you need to set mpuio as proper value to enable it. - Say N here if you don't need this. - -config SOUND_CMPCI_JOYSTICK - bool "Enable joystick" - depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT) - help - Say Y here in order to enable the joystick port on a sound card using - the CMI8338 or the CMI8738 chipset. You need to config the - gameport support and set joystick parameter as 1 to use it. - Say N here if you don't need this. - config SOUND_EMU10K1 tristate "Creative SBLive! (EMU10K1)" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER + depends on SOUND_PRIME && PCI ---help--- Say Y or M if you have a PCI sound card using the EMU10K1 chipset, such as the Creative SBLive!, SB PCI512 or Emu-APS. @@ -108,13 +55,6 @@ config SOUND_FUSION series) when wired as native sound drivers with AC97 codecs. If this driver does not work try the CS4232 driver. -config SOUND_CS4281 - tristate "Crystal Sound CS4281" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Picture and feature list at - <http://www.pcbroker.com/crystal4281.html>. - config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" depends on SOUND_PRIME && SIBYTE_SWARM @@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A note that CONFIG_KGDB should not be enabled at the same time, since it also attempts to use this UART port. -config SOUND_ES1370 - tristate "Ensoniq AudioPCI (ES1370)" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a PCI sound card utilizing the Ensoniq - ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find - out if your sound card uses an ES1370 without removing your - computer's cover, use lspci -n and look for the PCI ID - 1274:5000. Since Ensoniq was bought by Creative Labs, - Sound Blaster 64/PCI models are either ES1370 or ES1371 based. - This driver differs slightly from OSS/Free, so PLEASE READ - <file:Documentation/sound/oss/es1370>. - config SOUND_ES1371 tristate "Creative Ensoniq AudioPCI 97 (ES1371)" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER + depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if @@ -151,33 +78,6 @@ config SOUND_ES1371 slightly from OSS/Free, so PLEASE READ <file:Documentation/sound/oss/es1371>. -config SOUND_ESSSOLO1 - tristate "ESS Technology Solo1" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a PCI sound card utilizing the ESS Technology - Solo1 chip. To find out if your sound card uses a - Solo1 chip without removing your computer's cover, use - lspci -n and look for the PCI ID 125D:1969. This driver - differs slightly from OSS/Free, so PLEASE READ - <file:Documentation/sound/oss/solo1>. - -config SOUND_MAESTRO - tristate "ESS Maestro, Maestro2, Maestro2E driver" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a sound system driven by ESS's Maestro line - of PCI sound chips. These include the Maestro 1, Maestro 2, and - Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more - details. - -config SOUND_MAESTRO3 - tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)" - depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a sound system driven by ESS's Maestro 3 - PCI sound chip. - config SOUND_ICH tristate "Intel ICH (i8xx) audio support" depends on SOUND_PRIME && PCI @@ -185,24 +85,6 @@ config SOUND_ICH Support for integral audio in Intel's I/O Controller Hub (ICH) chipset, as used on the 810/820/840 motherboards. -config SOUND_HARMONY - tristate "PA Harmony audio driver" - depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER - help - Say 'Y' or 'M' to include support for Harmony soundchip - on HP 712, 715/new and many other GSC based machines. - -config SOUND_SONICVIBES - tristate "S3 SonicVibes" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a PCI sound card utilizing the S3 - SonicVibes chipset. To find out if your sound card uses a - SonicVibes chip without removing your computer's cover, use - lspci -n and look for the PCI ID 5333:CA00. This driver - differs slightly from OSS/Free, so PLEASE READ - <file:Documentation/sound/oss/sonicvibes>. - config SOUND_VWSND tristate "SGI Visual Workstation Sound" depends on SOUND_PRIME && X86_VISWS @@ -231,10 +113,6 @@ config SOUND_VRC5477 integrated, multi-function controller chip for MIPS CPUs. Works with the AC97 codec. -config SOUND_AU1000 - tristate "Au1000 Sound" - depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER - config SOUND_AU1550_AC97 tristate "Au1550 AC97 Sound" depends on SOUND_PRIME && SOC_AU1550 @@ -505,26 +383,6 @@ config MSND_FIFOSIZE and Pinnacle). Larger values reduce the chance of data overruns at the expense of overall latency. If unsure, use the default. -config SOUND_VIA82CXXX - tristate "VIA 82C686 Audio Codec" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y here to include support for the audio codec found on VIA - 82Cxxx-based chips. Typically these are built into a motherboard. - - DO NOT select Sound Blaster or Adlib with this driver, unless - you have a Sound Blaster or Adlib card in addition to your VIA - audio chip. - -config MIDI_VIA82CXXX - bool "VIA 82C686 MIDI" - depends on SOUND_VIA82CXXX && ISA_DMA_API - help - Answer Y to use the MIDI interface of the Via686. You may need to - enable this in the BIOS before it will work. This is for connection - to external MIDI hardware, and is not required for software playback - of MIDI files. - config SOUND_OSS tristate "OSS sound modules" depends on SOUND_PRIME && ISA_DMA_API @@ -576,18 +434,6 @@ config SOUND_AD1889 Say M here if you have a sound card based on the Analog Devices AD1889 chip. -config SOUND_SGALAXY - tristate "Aztech Sound Galaxy (non-PnP) cards" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - This module initializes the older non Plug and Play sound galaxy - cards from Aztech. It supports the Waverider Pro 32 - 3D and the - Galaxy Washington 16. - - If you compile the driver into the kernel, you have to add - "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command - line. - config SOUND_ADLIB tristate "Adlib Cards" depends on SOUND_OSS @@ -612,56 +458,6 @@ config SOUND_ACI_MIXER This driver is also available as a module and will be called aci. -config SOUND_CS4232 - tristate "Crystal CS4232 based (PnP) cards" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Say Y here if you have a card based on the Crystal CS4232 chip set, - which uses its own Plug and Play protocol. - - If you compile the driver into the kernel, you have to add - "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel - command line. - - See <file:Documentation/sound/oss/CS4232> for more information on - configuring this card. - -config SOUND_SSCAPE - tristate "Ensoniq SoundScape support" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Answer Y if you have a sound card based on the Ensoniq SoundScape - chipset. Such cards are being manufactured at least by Ensoniq, Spea - and Reveal (Reveal makes also other cards). - - If you compile the driver into the kernel, you have to add - "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command - line. - -config SOUND_GUS - tristate "Gravis Ultrasound support" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Say Y here for any type of Gravis Ultrasound card, including the GUS - or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more - information on configuring this card with modules. - - If you compile the driver into the kernel, you have to add - "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line. - -config SOUND_GUS16 - bool "16 bit sampling option of GUS (_NOT_ GUS MAX)" - depends on SOUND_GUS - help - Support for Gravis Ulstrasound (GUS) cards (other than the GUS), - sampling at 16-bit width. - -config SOUND_GUSMAX - bool "GUS MAX support" - depends on SOUND_GUS - help - Support for Gravis Ulstrasound MAX. - config SOUND_VMIDI tristate "Loopback MIDI device support" depends on SOUND_OSS @@ -742,7 +538,7 @@ config SOUND_MPU401 config SOUND_NM256 tristate "NM256AV/NM256ZX audio support" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER + depends on SOUND_OSS help Say M here to include audio support for the NeoMagic 256AV/256ZX chipsets. These are the audio chipsets found in the Sony @@ -752,35 +548,6 @@ config SOUND_NM256 See <file:Documentation/sound/oss/NM256> for further information. -config SOUND_MAD16 - tristate "OPTi MAD16 and/or Mozart based cards" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - ---help--- - Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi - 82C928 or 82C929 or 82C931) audio interface chip. These chips are - quite common so it's possible that many no-name cards have one of - them. In addition the MAD16 chip is used in some cards made by known - manufacturers such as Turtle Beach (Tropez), Reveal (some models) - and Diamond (latest ones). Note however that the Tropez sound cards - have their own driver; if you have one of those, say N here and Y or - M to "Full support for Turtle Beach WaveFront", below. - - If you compile the driver into the kernel, you have to add - "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the - kernel command line. - - See also <file:Documentation/sound/oss/Opti> and - <file:Documentation/sound/oss/MAD16> for more information on setting - these cards up as modules. - -config MAD16_OLDCARD - bool "Support MIDI in older MAD16 based cards (requires SB)" - depends on SOUND_MAD16 - help - Answer Y (or M) if you have an older card based on the C928 or - Mozart chipset and you want to have MIDI support. If you enable this - option you also need to enable support for Sound Blaster. - config SOUND_PAS tristate "ProAudioSpectrum 16 support" depends on SOUND_OSS @@ -873,53 +640,9 @@ config SOUND_SB You can say M here to compile this driver as a module; the module is called sb. -config SOUND_AWE32_SYNTH - tristate "AWE32 synth" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or - similar sound card. See <file:Documentation/sound/oss/README.awe>, - <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> - for more info. - -config SOUND_WAVEFRONT - tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards" - depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER - help - Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card - and read the files <file:Documentation/sound/oss/Wavefront> and - <file:Documentation/sound/oss/Tropez+>. - -config SOUND_MAUI - tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez - sound card. - - If you compile the driver into the kernel, you have to add - "maui=<io>,<irq>" to the kernel command line. - -config MAUI_HAVE_BOOT - bool "Have OSWF.MOT firmware file" - depends on SOUND_MAUI=y && !STANDALONE - help - Turtle Beach Maui and Tropez sound cards have a microcontroller - which needs to be initialized prior to use. OSWF.MOT is a file - distributed with the card's DOS/Windows drivers. Answer Y if you - have this file. - -config MAUI_BOOT_FILE - string "Full pathname of OSWF.MOT firmware file" - depends on MAUI_HAVE_BOOT - default "/etc/sound/oswf.mot" - help - Enter the full pathname of your OSWF.MOT file, starting from /. - config SOUND_YM3812 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER + depends on SOUND_OSS ---help--- Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). Answering Y is usually a safe and recommended choice, however some @@ -933,18 +656,6 @@ config SOUND_YM3812 If unsure, say Y. -config SOUND_OPL3SA1 - tristate "Yamaha OPL3-SA1 audio controller" - depends on SOUND_OSS && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is - usually built into motherboards. Read - <file:Documentation/sound/oss/OPL3-SA> for details. - - If you compile the driver into the kernel, you have to add - "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel - command line. - config SOUND_OPL3SA2 tristate "Yamaha OPL3-SA2 and SA3 based PnP cards" depends on SOUND_OSS @@ -959,19 +670,6 @@ config SOUND_OPL3SA2 "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel command line. -config SOUND_YMFPCI - tristate "Yamaha YMF7xx PCI audio (native mode)" - depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER - help - Support for Yamaha cards including the YMF711, YMF715, YMF718, - YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital. - -config SOUND_YMFPCI_LEGACY - bool "Yamaha PCI legacy ports support" - depends on SOUND_YMFPCI - help - Support for YMF7xx PCI cards emulating an MP401. - config SOUND_UART6850 tristate "6850 UART support" depends on SOUND_OSS @@ -1101,30 +799,6 @@ config SOUND_KAHLUA tristate "XpressAudio Sound Blaster emulation" depends on SOUND_SB -config SOUND_ALI5455 - tristate "ALi5455 audio support" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - -config SOUND_FORTE - tristate "ForteMedia FM801 driver" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you want driver support for the ForteMedia FM801 PCI - audio controller (Abit AU10, Genius Sound Maker, HP Workstation - zx2000, and others). - -config SOUND_RME96XX - tristate "RME Hammerfall (RME96XX) support" - depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER - help - Say Y or M if you have a Hammerfall or Hammerfall light - multichannel card from RME. If you want to access advanced - features of the card, read <file:Documentation/sound/oss/rme96xx>. - -config SOUND_AD1980 - tristate "AD1980 front/back switch plugin" - depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER - config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" depends on SOUND_PRIME && CPU_SH3 |