diff options
Diffstat (limited to 'sound/pci')
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 108 |
1 files changed, 54 insertions, 54 deletions
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 104d2a37f45..c8b0ec81437 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2819,28 +2819,28 @@ static struct hda_verb alc260_fujitsu_init_verbs[] = { {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* Headphone/Line-out jack connects to Line1 pin; make it an output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Ensure all other unused pins are disabled and muted. - * Note: trying to set widget 0x15 to anything blocks all audio - * output for some reason, so just leave that at the default. - */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Ensure all other unused pins are disabled and muted. */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - /* Ensure Line1 pin widget takes its input from the OUT1 sum bus - * when acting as an output. - */ - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + /* Ensure Line1 pin widget takes its input from the OUT1 sum bus + * when acting as an output. + */ + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - /* Start with output sum widgets muted and their output gains at min */ + /* Start with output sum widgets muted and their output gains at min */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, @@ -2851,42 +2851,42 @@ static struct hda_verb alc260_fujitsu_init_verbs[] = { {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Line1 pin widget output buffer since it starts as an output. - * If the pin mode is changed by the user the pin mode control will - * take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. + /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Line1 pin widget output buffer since it starts as an output. + * If the pin mode is changed by the user the pin mode control will + * take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute input buffer of pin widget used for Line-in (no equiv * mixer ctrl) */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - line - * in (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to line in - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - line + * in (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do the same for the second ADC: mute capture input amp and + * set ADC connection to line in (on mic1 pin) + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ { } }; @@ -3068,7 +3068,7 @@ static struct hda_verb alc260_test_init_verbs[] = { {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - /* Ensure mic1, mic2, line1 and line2 pin widget take input from the + /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the * OUT1 sum bus when acting as an output. */ {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, @@ -3103,13 +3103,13 @@ static struct hda_verb alc260_test_init_verbs[] = { /* Mute capture amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - line - * in (on mic1 pin) + /* Set ADC connection select to match default mixer setting (mic1 + * pin) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to line in + * set ADC connection to mic1 pin */ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, |