diff options
Diffstat (limited to 'sound/soc/s3c24xx')
| -rw-r--r-- | sound/soc/s3c24xx/Kconfig | 22 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/Makefile | 7 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c-i2s-v2.c | 6 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx-pcm.c | 1 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx_simtec.c | 394 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx_simtec.h | 22 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx_simtec_hermes.c | 153 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | 137 |
8 files changed, 738 insertions, 4 deletions
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 808de5c5caa..68fef00bd7f 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,6 +1,7 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX + select S3C64XX_DMA if ARCH_S3C64XX help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97 or I2S interfaces. You will also need to @@ -79,3 +80,22 @@ config SND_S3C24XX_SOC_S3C24XX_UDA134X select SND_S3C24XX_SOC_I2S select SND_SOC_L3 select SND_SOC_UDA134X + +config SND_S3C24XX_SOC_SIMTEC + tristate + help + Internal node for common S3C24XX/Simtec suppor + +config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 + tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" + depends on SND_S3C24XX_SOC + select SND_S3C24XX_SOC_I2S + select SND_SOC_TLV320AIC23 + select SND_S3C24XX_SOC_SIMTEC + +config SND_S3C24XX_SOC_SIMTEC_HERMES + tristate "SoC I2S Audio support for Simtec Hermes board" + depends on SND_S3C24XX_SOC + select SND_S3C24XX_SOC_I2S + select SND_SOC_TLV320AIC3X + select SND_S3C24XX_SOC_SIMTEC diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index eb219b01649..99f5a7dd3fc 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -20,6 +20,9 @@ snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o +snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o +snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o +snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o @@ -27,3 +30,7 @@ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm87 obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o +obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o +obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o +obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o + diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 1a283170ca9..ebfb2f63105 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -357,19 +357,19 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, #endif #ifdef CONFIG_PLAT_S3C64XX - iismod &= ~0x606; + iismod &= ~(S3C64XX_IISMOD_BLC_MASK | S3C2412_IISMOD_BCLK_MASK); /* Sample size */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: /* 8 bit sample, 16fs BCLK */ - iismod |= 0x2004; + iismod |= (S3C64XX_IISMOD_BLC_8BIT | S3C2412_IISMOD_BCLK_16FS); break; case SNDRV_PCM_FORMAT_S16_LE: /* 16 bit sample, 32fs BCLK */ break; case SNDRV_PCM_FORMAT_S24_LE: /* 24 bit sample, 48fs BCLK */ - iismod |= 0x4002; + iismod |= (S3C64XX_IISMOD_BLC_24BIT | S3C2412_IISMOD_BCLK_48FS); break; } #endif diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index eecfa5eba06..8a931964ce4 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -318,6 +318,7 @@ static int s3c24xx_pcm_open(struct snd_pcm_substream *substream) pr_debug("Entered %s\n", __func__); + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware); prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c new file mode 100644 index 00000000000..1966e0d5652 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec.c @@ -0,0 +1,394 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/i2c.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +static struct s3c24xx_audio_simtec_pdata *pdata; +static struct clk *xtal_clk; + +static int spk_gain; +static int spk_unmute; + +/** + * speaker_gain_get - read the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_gain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_gain; + return 0; +} + +/** + * speaker_gain_set - set the value of the speaker amp gain + * @value: The value to write. + */ +static void speaker_gain_set(int value) +{ + gpio_set_value_cansleep(pdata->amp_gain[0], value & 1); + gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1); +} + +/** + * speaker_gain_put - set the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + * + * Note, if the speaker amp is muted, then we do not set a gain value + * as at-least one of the ICs that is fitted will try and power up even + * if the main control is set to off. + */ +static int speaker_gain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int value = ucontrol->value.integer.value[0]; + + spk_gain = value; + + if (!spk_unmute) + speaker_gain_set(value); + + return 0; +} + +static const struct snd_kcontrol_new amp_gain_controls[] = { + SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0, + speaker_gain_get, speaker_gain_put), +}; + +/** + * spk_unmute_state - set the unmute state of the speaker + * @to: zero to unmute, non-zero to ununmute. + */ +static void spk_unmute_state(int to) +{ + pr_debug("%s: to=%d\n", __func__, to); + + spk_unmute = to; + gpio_set_value(pdata->amp_gpio, to); + + /* if we're umuting, also re-set the gain */ + if (to && pdata->amp_gain[0] > 0) + speaker_gain_set(spk_gain); +} + +/** + * speaker_unmute_get - read the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_unmute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_unmute; + return 0; +} + +/** + * speaker_unmute_put - set the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + */ +static int speaker_unmute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + spk_unmute_state(ucontrol->value.integer.value[0]); + return 0; +} + +/* This is added as a manual control as the speaker amps create clicks + * when their power state is changed, which are far more noticeable than + * anything produced by the CODEC itself. + */ +static const struct snd_kcontrol_new amp_unmute_controls[] = { + SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0, + speaker_unmute_get, speaker_unmute_put), +}; + +void simtec_audio_init(struct snd_soc_codec *codec) +{ + if (pdata->amp_gpio > 0) { + pr_debug("%s: adding amp routes\n", __func__); + + snd_soc_add_controls(codec, amp_unmute_controls, + ARRAY_SIZE(amp_unmute_controls)); + } + + if (pdata->amp_gain[0] > 0) { + pr_debug("%s: adding amp controls\n", __func__); + snd_soc_add_controls(codec, amp_gain_controls, + ARRAY_SIZE(amp_gain_controls)); + } +} +EXPORT_SYMBOL_GPL(simtec_audio_init); + +#define CODEC_CLOCK 12000000 + +/** + * simtec_hw_params - update hardware parameters + * @substream: The audio substream instance. + * @params: The parameters requested. + * + * Update the codec data routing and configuration settings + * from the supplied data. + */ +static int simtec_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set the CODEC as the bus clock master, I2S */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set cpu dai format\n", __func__); + return ret; + } + + /* Set the CODEC as the bus clock master */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set codec dai format\n", __func__); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, + CODEC_CLOCK, SND_SOC_CLOCK_IN); + if (ret) { + pr_err( "%s: failed setting codec sysclk\n", __func__); + return ret; + } + + if (pdata->use_mpllin) { + ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL, + 0, SND_SOC_CLOCK_OUT); + + if (ret) { + pr_err("%s: failed to set MPLLin as clksrc\n", + __func__); + return ret; + } + } + + if (pdata->output_cdclk) { + int cdclk_scale; + + cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK; + cdclk_scale--; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + cdclk_scale); + } + + return 0; +} + +static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd) +{ + /* call any board supplied startup code, this currently only + * covers the bast/vr1000 which have a CPLD in the way of the + * LRCLK */ + if (pd->startup) + pd->startup(); + + return 0; +} + +static struct snd_soc_ops simtec_snd_ops = { + .hw_params = simtec_hw_params, +}; + +/** + * attach_gpio_amp - get and configure the necessary gpios + * @dev: The device we're probing. + * @pd: The platform data supplied by the board. + * + * If there is a GPIO based amplifier attached to the board, claim + * the necessary GPIO lines for it, and set default values. + */ +static int attach_gpio_amp(struct device *dev, + struct s3c24xx_audio_simtec_pdata *pd) +{ + int ret; + + /* attach gpio amp gain (if any) */ + if (pdata->amp_gain[0] > 0) { + ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain0\n"); + return ret; + } + + ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain1\n"); + gpio_free(pdata->amp_gain[0]); + return ret; + } + + gpio_direction_output(pd->amp_gain[0], 0); + gpio_direction_output(pd->amp_gain[1], 0); + } + + /* note, curently we assume GPA0 isn't valid amp */ + if (pdata->amp_gpio > 0) { + ret = gpio_request(pd->amp_gpio, "gpio-amp"); + if (ret) { + dev_err(dev, "cannot get amp gpio %d (%d)\n", + pd->amp_gpio, ret); + goto err_amp; + } + + /* set the amp off at startup */ + spk_unmute_state(0); + } + + return 0; + +err_amp: + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + return ret; +} + +static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd) +{ + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + if (pd->amp_gpio > 0) + gpio_free(pd->amp_gpio); +} + +#ifdef CONFIG_PM +int simtec_audio_resume(struct device *dev) +{ + simtec_call_startup(pdata); + return 0; +} + +struct dev_pm_ops simtec_audio_pmops = { + .resume = simtec_audio_resume, +}; +EXPORT_SYMBOL_GPL(simtec_audio_pmops); +#endif + +int __devinit simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_device *socdev) +{ + struct platform_device *snd_dev; + int ret; + + socdev->card->dai_link->ops = &simtec_snd_ops; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + simtec_call_startup(pdata); + + xtal_clk = clk_get(&pdev->dev, "xtal"); + if (IS_ERR(xtal_clk)) { + dev_err(&pdev->dev, "could not get clkout0\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk)); + + ret = attach_gpio_amp(&pdev->dev, pdata); + if (ret) + goto err_clk; + + snd_dev = platform_device_alloc("soc-audio", -1); + if (!snd_dev) { + dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n"); + ret = -ENOMEM; + goto err_gpio; + } + + platform_set_drvdata(snd_dev, socdev); + socdev->dev = &snd_dev->dev; + + ret = platform_device_add(snd_dev); + if (ret) { + dev_err(&pdev->dev, "failed to add soc-audio dev\n"); + goto err_pdev; + } + + platform_set_drvdata(pdev, snd_dev); + return 0; + +err_pdev: + platform_device_put(snd_dev); + +err_gpio: + detach_gpio_amp(pdata); + +err_clk: + clk_put(xtal_clk); + return ret; +} +EXPORT_SYMBOL_GPL(simtec_audio_core_probe); + +int __devexit simtec_audio_remove(struct platform_device *pdev) +{ + struct platform_device *snd_dev = platform_get_drvdata(pdev); + + platform_device_unregister(snd_dev); + + detach_gpio_amp(pdata); + clk_put(xtal_clk); + return 0; +} +EXPORT_SYMBOL_GPL(simtec_audio_remove); + +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h new file mode 100644 index 00000000000..2714203af16 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec.h @@ -0,0 +1,22 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec.h + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void simtec_audio_init(struct snd_soc_codec *codec); + +extern int simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_device *socdev); + +extern int simtec_audio_remove(struct platform_device *pdev); + +#ifdef CONFIG_PM +extern struct dev_pm_ops simtec_audio_pmops; +#define simtec_audio_pm &simtec_audio_pmops +#else +#define simtec_audio_pm NULL +#endif diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c new file mode 100644 index 00000000000..8346bd96eaf --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c @@ -0,0 +1,153 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +#include "../codecs/tlv320aic3x.h" + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_LINE("GSM Out", NULL), + SND_SOC_DAPM_LINE("GSM In", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_LINE("ZV", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_HP("Headphone Jack", NULL), +}; + +static const struct snd_soc_dapm_route base_map[] = { + /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */ + + { "Headphone Jack", NULL, "HPLOUT" }, + { "Headphone Jack", NULL, "HPLCOM" }, + { "Headphone Jack", NULL, "HPROUT" }, + { "Headphone Jack", NULL, "HPRCOM" }, + + /* ZV connected to Line1 */ + + { "LINE1L", NULL, "ZV" }, + { "LINE1R", NULL, "ZV" }, + + /* Line In connected to Line2 */ + + { "LINE2L", NULL, "Line In" }, + { "LINE2R", NULL, "Line In" }, + + /* Microphone connected to MIC3R and MIC_BIAS */ + + { "MIC3L", NULL, "Mic Jack" }, + + /* GSM connected to MONO_LOUT and MIC3L (in) */ + + { "GSM Out", NULL, "MONO_LOUT" }, + { "MIC3L", NULL, "GSM In" }, + + /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are + * not using the DAPM to power it up and down as there it makes + * a click when powering up. */ +}; + +/** + * simtec_hermes_init - initialise and add controls + * @codec; The codec instance to attach to. + * + * Attach our controls and configure the necessary codec + * mappings for our sound card instance. +*/ +static int simtec_hermes_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, dapm_widgets, + ARRAY_SIZE(dapm_widgets)); + + snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Line Out"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + simtec_audio_init(codec); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct aic3x_setup_data codec_setup = { +}; + +static struct snd_soc_dai_link simtec_dai_aic33 = { + .name = "tlv320aic33", + .stream_name = "TLV320AIC33", + .cpu_dai = &s3c24xx_i2s_dai, + .codec_dai = &aic3x_dai, + .init = simtec_hermes_init, +}; + +/* simtec audio machine driver */ +static struct snd_soc_card snd_soc_machine_simtec_aic33 = { + .name = "Simtec-Hermes", + .platform = &s3c24xx_soc_platform, + .dai_link = &simtec_dai_aic33, + .num_links = 1, +}; + +/* simtec audio subsystem */ +static struct snd_soc_device simtec_snd_devdata_aic33 = { + .card = &snd_soc_machine_simtec_aic33, + .codec_dev = &soc_codec_dev_aic3x, + .codec_data = &codec_setup, +}; + +static int __devinit simtec_audio_hermes_probe(struct platform_device *pd) +{ + dev_info(&pd->dev, "probing....\n"); + return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic33); +} + +static struct platform_driver simtec_audio_hermes_platdrv = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c24xx-simtec-hermes-snd", + .pm = simtec_audio_pm, + }, + .probe = simtec_audio_hermes_probe, + .remove = __devexit_p(simtec_audio_remove), +}; + +MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd"); + +static int __init simtec_hermes_modinit(void) +{ + return platform_driver_register(&simtec_audio_hermes_platdrv); +} + +static void __exit simtec_hermes_modexit(void) +{ + platform_driver_unregister(&simtec_audio_hermes_platdrv); +} + +module_init(simtec_hermes_modinit); +module_exit(simtec_hermes_modexit); + +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c new file mode 100644 index 00000000000..25797e09617 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c @@ -0,0 +1,137 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +#include "../codecs/tlv320aic23.h" + +/* supported machines: + * + * Machine Connections AMP + * ------- ----------- --- + * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired) + * VR1000 HPOUT, LIN None + * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R) + */ + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + +static const struct snd_soc_dapm_route base_map[] = { + { "Headphone Jack", NULL, "LHPOUT"}, + { "Headphone Jack", NULL, "RHPOUT"}, + + { "Line Out", NULL, "LOUT" }, + { "Line Out", NULL, "ROUT" }, + + { "LLINEIN", NULL, "Line In"}, + { "RLINEIN", NULL, "Line In"}, + + { "MICIN", NULL, "Mic Jack"}, +}; + +/** + * simtec_tlv320aic23_init - initialise and add controls + * @codec; The codec instance to attach to. + * + * Attach our controls and configure the necessary codec + * mappings for our sound card instance. +*/ +static int simtec_tlv320aic23_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, dapm_widgets, + ARRAY_SIZE(dapm_widgets)); + + snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Line Out"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + simtec_audio_init(codec); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link simtec_dai_aic23 = { + .name = "tlv320aic23", + .stream_name = "TLV320AIC23", + .cpu_dai = &s3c24xx_i2s_dai, + .codec_dai = &tlv320aic23_dai, + .init = simtec_tlv320aic23_init, +}; + +/* simtec audio machine driver */ +static struct snd_soc_card snd_soc_machine_simtec_aic23 = { + .name = "Simtec", + .platform = &s3c24xx_soc_platform, + .dai_link = &simtec_dai_aic23, + .num_links = 1, +}; + +/* simtec audio subsystem */ +static struct snd_soc_device simtec_snd_devdata_aic23 = { + .card = &snd_soc_machine_simtec_aic23, + .codec_dev = &soc_codec_dev_tlv320aic23, +}; + +static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd) +{ + return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic23); +} + +static struct platform_driver simtec_audio_tlv320aic23_platdrv = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c24xx-simtec-tlv320aic23", + .pm = simtec_audio_pm, + }, + .probe = simtec_audio_tlv320aic23_probe, + .remove = __devexit_p(simtec_audio_remove), +}; + +MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23"); + +static int __init simtec_tlv320aic23_modinit(void) +{ + return platform_driver_register(&simtec_audio_tlv320aic23_platdrv); +} + +static void __exit simtec_tlv320aic23_modexit(void) +{ + platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv); +} + +module_init(simtec_tlv320aic23_modinit); +module_exit(simtec_tlv320aic23_modexit); + +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); +MODULE_LICENSE("GPL"); |