aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-27xen: fix UP setup of shared_infoJeremy Fitzhardinge
We need to set up the shared_info pointer once we've mapped the real shared_info into its fixmap slot. That needs to happen once the general pagetable setup has been done. Previously, the UP shared_info was set up one in xen_start_kernel, but that was left pointing to the dummy shared info. Unfortunately there's no really good place to do a later setup of the shared_info in UP, so just do it once the pagetable setup has been done. [ Stable: needed in 2.6.24.x ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27xen: fix RMW when unmasking eventsJeremy Fitzhardinge
xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff, XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones in one instuction. Unfortunately, the pending flag must be modified with a locked operation since it can be set by another CPU, and the unlocked form of this operation was causing the pending flag to get lost, allowing the processor to return to usermode with pending events and ultimately deadlock. The simple fix would be to make it a locked operation, but that's rather costly and unnecessary. The fix here is to split the mask-clearing and pending-testing into two instructions; the interrupt window between them is of no concern because either way pending or new events will be processed. This should fix lingering bugs in using direct vcpu structure access too. [ Stable: needed in 2.6.24.x ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86, documentation: nmi_watchdog=2 works on x86_64Marcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86: stricter check in follow_huge_addr()Christoph Lameter
The first page of the compound page is determined in follow_huge_addr() but then PageCompound() only checks if the page is part of a compound page. PageHead() allows checking if this is indeed the first page of the compound. Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27rdc321x: GPIO routines bugfixesFlorian Fainelli
This patch fixes the use of GPIO routines which are in the PCI configuration space of the RDC321x, therefore reading/writing to this space without spinlock protection can be problematic. We also now request and free GPIOs and support the MGB100 board, previous code was very AR525W-centric. Signed-off-by: Volker Weiss <volker@tintuc.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-27x86: ptrace.c: fix defined-but-unused warningsAndrew Morton
arch/x86/kernel/ptrace.c:548: warning: 'ptrace_bts_get_size' defined but not used arch/x86/kernel/ptrace.c:558: warning: 'ptrace_bts_read_record' defined but not used arch/x86/kernel/ptrace.c:607: warning: 'ptrace_bts_clear' defined but not used arch/x86/kernel/ptrace.c:617: warning: 'ptrace_bts_drain' defined but not used arch/x86/kernel/ptrace.c:720: warning: 'ptrace_bts_config' defined but not used arch/x86/kernel/ptrace.c:788: warning: 'ptrace_bts_status' defined but not used Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-27x86: fix prefetch workaroundIngo Molnar
some early Athlon XP's and Opterons generate bogus faults on prefetch instructions. The workaround for this regressed over .24 - reinstate it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix performance drop for glx x86: fix trim mtrr not to setup_memory two times x86: GEODE: add missing module.h include x86, cpufreq: fix Speedfreq-SMI call that clobbers ECX x86: fix memoryless node oops during boot x86: add dmi quirk for io_delay x86: convert mtrr/generic.c to kernel-doc x86: Documentation/i386/IO-APIC.txt: fix description
2008-03-26hugetlb: fix potential livelock in return_unused_surplus_hugepages()Nishanth Aravamudan
Running the counters testcase from libhugetlbfs results in on 2.6.25-rc5 and 2.6.25-rc5-mm1: BUG: soft lockup - CPU#3 stuck for 61s! [counters:10531] NIP: c0000000000d1f3c LR: c0000000000d1f2c CTR: c0000000001b5088 REGS: c000005db12cb360 TRAP: 0901 Not tainted (2.6.25-rc5-autokern1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 48008448 XER: 20000000 TASK = c000005dbf3d6000[10531] 'counters' THREAD: c000005db12c8000 CPU: 3 GPR00: 0000000000000004 c000005db12cb5e0 c000000000879228 0000000000000004 GPR04: 0000000000000010 0000000000000000 0000000000200200 0000000000100100 GPR08: c0000000008aba10 000000000000ffff 0000000000000004 0000000000000000 GPR12: 0000000028000442 c000000000770080 NIP [c0000000000d1f3c] .return_unused_surplus_pages+0x84/0x18c LR [c0000000000d1f2c] .return_unused_surplus_pages+0x74/0x18c Call Trace: [c000005db12cb5e0] [c000005db12cb670] 0xc000005db12cb670 (unreliable) [c000005db12cb670] [c0000000000d24c4] .hugetlb_acct_memory+0x2e0/0x354 [c000005db12cb740] [c0000000001b5048] .truncate_hugepages+0x1d4/0x214 [c000005db12cb890] [c0000000001b50a4] .hugetlbfs_delete_inode+0x1c/0x3c [c000005db12cb920] [c000000000103fd8] .generic_delete_inode+0xf8/0x1c0 [c000005db12cb9b0] [c0000000001b5100] .hugetlbfs_drop_inode+0x3c/0x24c [c000005db12cba50] [c00000000010287c] .iput+0xdc/0xf8 [c000005db12cbad0] [c0000000000fee54] .dentry_iput+0x12c/0x194 [c000005db12cbb60] [c0000000000ff050] .d_kill+0x6c/0xa4 [c000005db12cbbf0] [c0000000000ffb74] .dput+0x18c/0x1b0 [c000005db12cbc70] [c0000000000e9e98] .__fput+0x1a4/0x1e8 [c000005db12cbd10] [c0000000000e61ec] .filp_close+0xb8/0xe0 [c000005db12cbda0] [c0000000000e62d0] .sys_close+0xbc/0x134 [c000005db12cbe30] [c00000000000872c] syscall_exit+0x0/0x40 Instruction dump: ebbe8038 38800010 e8bf0002 3bbd0008 7fa3eb78 38a50001 7ca507b4 4818df25 60000000 38800010 38a00000 7c601b78 <7fa3eb78> 2f800010 409d0008 38000010 This was tracked down to a potential livelock in return_unused_surplus_hugepages(). In the case where we have surplus pages on some node, but no free pages on the same node, we may never break out of the loop. To avoid this livelock, terminate the search if we iterate a number of times equal to the number of online nodes without freeing a page. Thanks to Andy Whitcroft and Adam Litke for helping with debugging and the patch. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26hugetlb: indicate surplus huge page counts in per-node meminfoNishanth Aravamudan
Currently we show the surplus hugetlb pool state in /proc/meminfo, but not in the per-node meminfo files, even though we track the information on a per-node basis. Printing it there can help track down dynamic pool bugs including the one in the follow-on patch. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26x86: fix performance drop for glxSuresh Siddha
fix the 3D performance drop reported at: http://bugzilla.kernel.org/show_bug.cgi?id=10328 fb drivers are using ioremap()/ioremap_nocache(), followed by mtrr_add with WC attribute. Recent changes in page attribute code made both ioremap()/ioremap_nocache() mappings as UC (instead of previous UC-). This breaks the graphics performance, as the effective memory type is UC instead of expected WC. The correct way to fix this is to add ioremap_wc() (which uses UC- in the absence of PAT kernel support and WC with PAT) and change all the fb drivers to use this new ioremap_wc() API. We can take this correct and longer route for post 2.6.25. For now, revert back to the UC- behavior for ioremap/ioremap_nocache. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: fix trim mtrr not to setup_memory two timesYinghai Lu
we could call find_max_pfn() directly instead of setup_memory() to get max_pfn needed for mtrr trimming. otherwise setup_memory() is called two times... that is duplicated... [ mingo@elte.hu: both Thomas and me simulated a double call to setup_bootmem_allocator() and can confirm that it is a real bug which can hang in certain configs. It's not been reported yet but that is probably due to the relatively scarce nature of MTRR-trimming systems. ] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: GEODE: add missing module.h includeAndres Salomon
On Wed, 26 Mar 2008 11:56:22 -0600 Jordan Crouse <jordan.crouse@amd.com> wrote: > On 26/03/08 14:31 +0100, Stefan Pfetzing wrote: > > Hello Jordan, > > > > I just tried to build your geodwdt driver for the geode watchdog. Therefore > > I pulled your repository from http://git.infradead.org/geode.git (or more, > > the git url). > > > > I tried to build the geodewdt driver as a module - which didn't work, and > > it failed with the same problem as earlier mentioned on lkmk [1]. I also > > checked the fix [2], but that seems to be already in your (or linus) tree - > > and so I'm unsure what the problem is. > > > > [1] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884074 > > [2] http://kerneltrap.org/mailarchive/linux-kernel/2008/2/17/884174 > > > > Building directly into the kernel seems to work. > > > > Maybe you have some idea? > > Hmm - that is strange. Exporting the symbols should work. I recommend > starting over with a clean tree. > > CCing Andres - any thoughts? > > Jordan > Er, yeah. The patch below should fix it. This should probably go into 2.6.25. Oops, EXPORT_SYMBOL_GPL wasn't being declared due to this header being missing. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86, cpufreq: fix Speedfreq-SMI call that clobbers ECXStephan Diestelhorst
I have found that using SMI to change the cpu's frequency on my DELL Latitude L400 clobbers the ECX register in speedstep_set_state, causing unneccessary retries because the "state" variable has changed silently (GCC assumes it is still present in ECX). play safe and avoid gcc caching any register across IO port accesses that trigger SMIs. Signed-off by: <Stephan.Diestelhorst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: fix memoryless node oops during bootYinghai Lu
fix oops during boot reported in this thread: http://lkml.org/lkml/2008/2/6/65 enable booting on memoryless nodes. Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-26x86: add dmi quirk for io_delayIngo Molnar
reported by mereandor@gmail.com, in: http://bugzilla.kernel.org/show_bug.cgi?id=6307 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26x86: convert mtrr/generic.c to kernel-docRandy Dunlap
Convert function comment blocks to kernel-doc notation. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26x86: Documentation/i386/IO-APIC.txt: fix descriptionNick Andrew
The description of the interrupt routing doesn't match the (nice) diagram. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-26kprobes: MAINTAINERS updateMasami Hiramatsu
Add Masami Hiramatsu to kprobes maintainers Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26Merge branch 'slab-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm * 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: slab: fix cache_cache bootstrap in kmem_cache_init() count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFO
2008-03-26Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: NOHZ: reevaluate idle sleep length after add_timer_on() clocksource: revert: use init_timer_deferrable for clocksource_watchdog
2008-03-26Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: relay: set an spd_release() hook for splice set relay file can not be read by pread(2)
2008-03-26SVCRDMA: Check num_sge when setting LAST_CTXT bitTom Tucker
The RDMACTXT_F_LAST_CTXT bit was getting set incorrectly when the last chunk in the read-list spanned multiple pages. This resulted in a kernel panic when the wrong context was used to build the RPC iovec page list. RDMA_READ is used to fetch RPC data from the client for NFS_WRITE requests. A scatter-gather is used to map the advertised client side buffer to the server-side iovec and associated page list. WR contexts are used to convey which scatter-gather entries are handled by each WR. When the write data is large, a single RPC may require multiple RDMA_READ requests so the contexts for a single RPC are chained together in a linked list. The last context in this list is marked with a bit RDMACTXT_F_LAST_CTXT so that when this WR completes, the CQ handler code can enqueue the RPC for processing. The code in rdma_read_xdr was setting this bit on the last two contexts on this list when the last read-list chunk spanned multiple pages. This caused the svc_rdma_recvfrom logic to incorrectly build the RPC and caused the kernel to crash because the second-to-last context doesn't contain the iovec page list. Modified the condition that sets this bit so that it correctly detects the last context for the RPC. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Tested-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26Revert "PCI: remove transparent bridge sizing"Linus Torvalds
This reverts commit 8fa5913d54f3b1e09948e6a0db34da887e05ff1f, which caused various interesting problems for people, including wrong resource allocations. See for example bugzilla entry "2.6.25-rc2: ohci1394 problem (MMIO broken)" at http://bugzilla.kernel.org/show_bug.cgi?id=10080 And Gary Hade says: "The same change had also exposed an issue reported by Paul Martin that has been causing an Oops while hotplugging ThinkPads to a ThinkPad Dock II. See http://lkml.org/lkml/2008/2/19/405 http://bugzilla.kernel.org/show_bug.cgi?id=9961 I have a fix for the ThinkPad docking Oops but if the issue being discussed here is caused by the transparent bridge sizing removal change I totally agree that it should be reverted." The transparent bridge sizing removal change was motivated by insufficient PCI memory resource for a transparent bridge window that was being created as a result of expansion ROM(s) being included in the transparent bridge sizing calculations. A later "PCI: Remove default PCI expansion ROM memory allocation" change ( re: http://lkml.org/lkml/2007/12/11/361 ) removes the expansion ROM(s) from the transparent bridge sizing calculations which actually resolves the original issue in a different manner. So, even if the "PCI: remove transparent bridge sizing" is not problematic it is no longer needed anyway." Identified-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26slab: fix cache_cache bootstrap in kmem_cache_init()Daniel Yeisley
Commit 556a169dab38b5100df6f4a45b655dddd3db94c1 ("slab: fix bootstrap on memoryless node") introduced bootstrap-time cache_cache list3s for all nodes but forgot that initkmem_list3 needs to be accessed by [somevalue + node]. This patch fixes list_add() corruption in mm/slab.c seen on the ES7000. Cc: Mel Gorman <mel@csn.ul.ie> Cc: Olaf Hering <olaf@aepfle.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-26count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFOChristoph Lameter
Avoid warnings about unused functions if neither SLUB_DEBUG nor CONFIG_SLABINFO is defined. This patch will be reversed when slab defrag is merged since slab defrag requires count_partial() to determine the fragmentation status of slab caches. Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-26relay: set an spd_release() hook for spliceJens Axboe
relay doesn't reference the pages it adds, however we need a non-NULL hook or splice_to_pipe() can oops. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26set relay file can not be read by pread(2)Lai Jiangshan
I found that relay files can be read by pread(2). I fix it, for relay files are not capable of seeking. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26NOHZ: reevaluate idle sleep length after add_timer_on()Thomas Gleixner
add_timer_on() can add a timer on a CPU which is currently in a long idle sleep, but the timer wheel is not reevaluated by the nohz code on that CPU. So a timer can be delayed for quite a long time. This triggered a false positive in the clocksource watchdog code. To avoid this we need to wake up the idle CPU and enforce the reevaluation of the timer wheel for the next timer event. Add a function, which checks a given CPU for idle state, marks the idle task with NEED_RESCHED and sends a reschedule IPI to notify the other CPU of the change in the timer wheel. Call this function from add_timer_on(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org -- include/linux/sched.h | 6 ++++++ kernel/sched.c | 43 +++++++++++++++++++++++++++++++++++++++++++ kernel/timer.c | 10 +++++++++- 3 files changed, 58 insertions(+), 1 deletion(-)
2008-03-25Linux 2.6.25-rc7Linus Torvalds
2008-03-25ACPI: fix Medion _PRT quirk (use "ISA_", not "ISA")Bjorn Helgaas
This fixes the builtin RTL8139 NIC on the Medion MD9580-F laptop. The BIOS reports the interrupt routing incorrectly. I recently added a quirk to work around this, and this patch fixes a typo in the quirk. We pad every ACPI pathname component to four characters, so ".ISA." will never match anything. We need ".ISA_." instead. Thank you Johann-Nikolaus Andreae <johann-nikolaus.andreae@nacs.de> for patiently testing this patch. See http://bugzilla.kernel.org/show_bug.cgi?id=4773 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-25clocksource: revert: use init_timer_deferrable for clocksource_watchdogThomas Gleixner
Revert commit 1077f5a917b7c630231037826b344b2f7f5b903f Author: Parag Warudkar <parag.warudkar@gmail.com> Date: Wed Jan 30 13:30:01 2008 +0100 clocksource.c: use init_timer_deferrable for clocksource_watchdog clocksource_watchdog can use a deferrable timer - reduces wakeups from idle per second. The watchdog timer needs to run with the specified interval. Otherwise it will miss the possible wrap of the watchdog clocksource. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2008-03-25Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix docbook problem ASoC/TLV320AIC3X: Stop I2C driver ID abuse i2c-omap: Fix unhandled fault i2c-bfin-twi: Disable BF54x support for now
2008-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: Fix memory leak on guest demand faults KVM: VMX: convert init_rmode_tss() to slots_lock KVM: MMU: handle page removal with shadow mapping KVM: MMU: Fix is_rmap_pte() with io ptes KVM: VMX: Restore tss even on x86_64
2008-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] get stack footprint of pathname resolution back to relative sanity [PATCH] double iput() on failure exit in hugetlb [PATCH] double dput() on failure exit in tiny-shmem [PATCH] fix up new filp allocators [PATCH] check for null vfsmount in dentry_open() [PATCH] reiserfs: eliminate private use of struct file in xattr [PATCH] sanitize hppfs hppfs pass vfsmount to dentry_open() [PATCH] restore export of do_kern_mount()
2008-03-25KVM: MMU: Fix memory leak on guest demand faultsAvi Kivity
While backporting 72dc67a69690288538142df73a7e3ac66fea68dc, a gfn_to_page() call was duplicated instead of moved (due to an unrelated patch not being present in mainline). This caused a page reference leak, resulting in a fairly massive memory leak. Fix by removing the extraneous gfn_to_page() call. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: convert init_rmode_tss() to slots_lockMarcelo Tosatti
init_rmode_tss was forgotten during the conversion from mmap_sem to slots_lock. INFO: task qemu-system-x86:3748 blocked for more than 120 seconds. Call Trace: [<ffffffff8053d100>] __down_read+0x86/0x9e [<ffffffff8053fb43>] do_page_fault+0x346/0x78e [<ffffffff8053d235>] trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8053dcad>] error_exit+0x0/0xa9 [<ffffffff8035a7a7>] copy_user_generic_string+0x17/0x40 [<ffffffff88099a8a>] :kvm:kvm_write_guest_page+0x3e/0x5f [<ffffffff880b661a>] :kvm_intel:init_rmode_tss+0xa7/0xf9 [<ffffffff880b7d7e>] :kvm_intel:vmx_vcpu_reset+0x10/0x38a [<ffffffff8809b9a5>] :kvm:kvm_arch_vcpu_setup+0x20/0x53 [<ffffffff8809a1e4>] :kvm:kvm_vm_ioctl+0xad/0x1cf [<ffffffff80249dea>] __lock_acquire+0x4f7/0xc28 [<ffffffff8028fad9>] vfs_ioctl+0x21/0x6b [<ffffffff8028fd75>] do_vfs_ioctl+0x252/0x26b [<ffffffff8028fdca>] sys_ioctl+0x3c/0x5e [<ffffffff8020b01b>] system_call_after_swapgs+0x7b/0x80 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: handle page removal with shadow mappingMarcelo Tosatti
Do not assume that a shadow mapping will always point to the same host frame number. Fixes crash with madvise(MADV_DONTNEED). [avi: move after first printk(), add another printk()] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: Fix is_rmap_pte() with io ptesAvi Kivity
is_rmap_pte() doesn't take into account io ptes, which have the avail bit set. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: Restore tss even on x86_64Avi Kivity
The vmx hardware state restore restores the tss selector and base address, but not its length. Usually, this does not matter since most of the tss contents is within the default length of 0x67. However, if a process is using ioperm() to grant itself I/O port permissions, an additional bitmap within the tss, but outside the default length is consulted. The effect is that the process will receive a SIGSEGV instead of transparently accessing the port. Fix by restoring the tss length. Note that i386 had this working already. Closes bugzilla 10246. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Fix cut-and-paste error in rtl8150.c USB: ehci: stop vt6212 bus hogging USB: sierra: add another device id USB: sierra: dma fixes USB: add support for Motorola ROKR Z6 cellphone in mass storage mode USB: isd200: fix memory leak in isd200_get_inquiry_data USB: pl2303: another product ID USB: new quirk flag to avoid Set-Interface USB: fix gadgetfs class request delegation
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: driver core: debug for bad dev_attr_show() return value. UIO: add pgprot_noncached() to UIO mmap code
2008-03-24PCI: revert "pcie: utilize pcie transaction pending bit"Andrew Morton
Revert as it is reported to cause problems for people. commit 4348a2dc49f9baecd34a9b0904245488c6189398 Author: Shaohua Li <shaohua.li@intel.com> Date: Wed Oct 24 10:45:08 2007 +0800 pcie: utilize pcie transaction pending bit PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Due to the regression reported at http://bugzilla.kernel.org/show_bug.cgi?id=10065 Cc: Shaohua Li <shaohua.li@intel.com> Cc: Soeren Sonnenburg <kernel@nn7.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24PCI: iova: lockdep false alarm fixMark Gross
lockdep goes off on the iova copy_reserved_iova() because it and a function it calls grabs locks in the from, and the to of the copy operation. The function grab locks of the same lock classes triggering the warning. The first lock grabbed is for the constant reserved areas that is never accessed after early boot. Technically you could do without grabbing the locks for the "from" structure its copying reserved areas from. But dropping the from locks to me looks wrong, even though it would be ok. The affected code only runs in early boot as its setting up the DMAR engines. This patch gives the reserved_ioval_list locks special lockdep classes. Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24driver core: debug for bad dev_attr_show() return value.Andrew Morton
Try to find the culprit who caused http://bugzilla.kernel.org/show_bug.cgi?id=10150 Cc: <balajirrao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24UIO: add pgprot_noncached() to UIO mmap codeJean-Samuel Chenard
Mapping of physical memory in UIO needs pgprot_noncached() to ensure that IO memory is not cached. Without pgprot_noncached(), it (accidentally) works on x86 and arm, but fails on PPC. Signed-off-by: Jean-Samuel Chenard <jsamch@gmail.com> Signed-off-by: Hans J Koch <hjk@linutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: Fix cut-and-paste error in rtl8150.cRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: ehci: stop vt6212 bus hoggingRene Herman
The VIA VT6212 defaults to only waiting 1us between passes over EHCI's async ring, which hammers PCI badly ... and by preventing other devices from accessing the bus, causes problems like drops in IDE throughput, a problem that's been bugging users of those chips for several years. A (partial) datasheet for this chip eventually turned up, letting us see how to make it use a VIA-specific register to switch over to the the normal 10us value instead, as suggested by the EHCI specification Solution noted by Lev A. Melnikovsky. It's not clear whether this register exists on other VIA chips; we know that it's ineffective on the vt8235. So this patch only applies to chips that seem to be incarnations of the (discrete) vt6212. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Lev A. Melnikovsky <melnikovsky@mail.ru> Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: add another device idKevin Lloyd
Add support for the MC8775 device to the sierra driver. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: dma fixesOliver Neukum
while I was adding autosuspend to that driver I noticed a few issues. You were having DMAed buffers as a part of a structure. This will fail on platforms that are not DMA-coherent (arm, sparc, ppc, ...) Please test this patch to fix it. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 07:32:35 +0000