aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-15[ARM] 4576/1: CM-X270 machine supportMike Rapoport
This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()Russell King
pxa_gpio_mode() is a universal call that fiddles with the GAFR (gpio alternate function register.) GAFR does not exist on PXA3 CPUs, but instead the alternate functions are controlled via the MFP support code. Platforms are expected to configure the MFP according to their needs in their platform support code rather than drivers. We extend this idea to the GAFR, and make the gpio_direction_*() functions purely operate on the GPIO level. This means platform support code is entirely responsible for configuring the GPIOs alternate functions on all PXA CPU types. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbolsRussell King
Make the cpu_is_pxaXXX() macros define to zero when support for a particular CPU is disabled. This allows us to eliminate code for CPUs which aren't enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: PXA3xx base supporteric miao
Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[NET] smc91x: fix PXA DMA support codeRussell King
The PXA DMA support code for smc91x doesn't pass a struct device to the dma_*map_single() functions, which leads to an oops in the dma bounce code. We have a struct device which was used to probe the SMC chip. Use it. (This patch is slightly larger because it requires struct smc_local to move into the header file.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[SERIAL] Fix console initialisation orderingRussell King
Ensure pm callback is called upon initialisation to place port in correct power saving state. Ensure console is initialised prior to deciding whether to power down the port. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: tidy up arch/arm/mach-pxa/MakefileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.ceric miao
a function pxa_init_irq_set_wake() was introduced, so that processor specific code could install their own version code setting PFER and PRER registers within pxa_gpio_irq_type are removed, and the edge configuration is postponed to the (*set_wake) and copies the GRER and GFER register, which will always be set up correctly by pxa_gpio_irq_type() Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variableeric miao
This definition produces processor specific code in generic function pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x and pxa27x in a single zImage. As David Brownell suggests, make it a run-time variable and initialize at run-time according to the number of GPIOs on the processor. For now the initialization happens in pxa_init_irq_gpio(), since there is already a parameter for that, besides, this is and MUST be earlier than any subsequent calls to pxa_gpio_mode(). Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4558/1: pxa: remove MACH_TYPE_LUBBOCK assignment and leave it to boot ↵eric miao
loader since both u-boot and blob support passing MACH_TYPE_LUBBOCK to the kernel, it should be quite safe to remove this Signed-off-by: eric miao <eric.y.miao@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: add PXA3 cpu_is_xxx() macroseric miao
Extracted from patch by Eric Miao, this adds the cpu_is_xxx() macros for identifying PXA3 SoCs. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: Make CPU_XSCALE depend on PXA25x or PXA27xRussell King
PXA3 SoCs are supported by the Xscale3 CPU code rather than the Xscale CPU code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: mark pxa_set_cken deprecatedRussell King
Allow the generic clock support code to fiddle with the CKEN register and mark pxa_set_cken() deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: remove get_lcdclk_frequency_10khz()Russell King
get_lcdclk_frequency_10khz() is now redundant, remove it. Hide pxa27x_get_lcdclk_frequency_10khz() from public view. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update pxa irda driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: Make STUART and FICP clocks availableRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update PXA UDC driver to use clk supportRussell King
Note: this produces a WARN() dump. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update pxa serial driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update PXA MMC interface driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update pxa27x keypad driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update pxa i2c driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: update pxafb to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: introduce clk support for PXA SoC clocksRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: make pxa27x devices globally visibleRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: fix naming of memory/lcd/core clock functionsRussell King
Rename pxa25x and pxa27x memory/lcd/core clock functions, and select the correct version at run time. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: convert PXA serial drivers to use platform resourcesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: make pxa timer initialisation select clock rate at runtimeRussell King
Rather than using the compile-time constant CLOCK_TICK_RATE, select the clock tick rate at run time. We organise the selection so that PXA3 automatically falls out with the right tick rate. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selectionNicolas Pitre
The previous implementation was relying on compile time optimizations based on a constant clock rate. However, support for different PXA flavors in the same kernel binary requires that the clock be selected at run time, so here it is. Let's move this code to a more appropriate location while at it. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_mv: more S/G fixes
2007-10-12[libata] sata_mv: more S/G fixesJeff Garzik
* corruption fix: we only want the lower 16 bits of length (0 == 64kb) * ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD, so we must reset it to own hw-specific length. * delete unused mv_fill_sg() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-11JFS: fix bio-related build breakageJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[POWERPC] Add memchr() to the bootwrapperDavid Gibson
This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Implement logging of unhandled signalsOlof Johansson
Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Add legacy serial support for OPB with flattened device treeValentine Barshak
Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] Use 1TB segmentsPaul Mackerras
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely
Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely
Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely
The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak
Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (80 commits) [MIPS] tlbex.c: Cleanup __init usage. [MIPS] WRPPMC serial support move to platform device [MIPS] R1: Fix hazard barriers to make kernels work on R2 also. [MIPS] VPE: reimplement ELF loader. [MIPS] cleanup WRPPMC include files [MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type. [MIPS] SMP: Use ISO C struct initializer for local structs. [MIPS] SMP: Kill useless casts. [MIPS] Kill num_online_cpus() loops. [MIPS] SMP: Implement smp_call_function_mask(). [MIPS] Make facility to convert CPU types to strings generally available. [MIPS] Convert list of CPU types from #define to enum. [MIPS] Optimize get_unaligned / put_unaligned implementations. [MIPS] checkfiles: Fix "need space after that ','" errors. [MIPS] Fix "no space between function name and open parenthesis" warnings. [MIPS] Allow hardwiring of the CPU type to a single type for optimization. [MIPS] tlbex: Size optimize code by declaring a few functions inline. [MIPS] pg-r4k.c: Dump the generated code [MIPS] Cobalt: Remove cobalt_machine_power_off() [MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c ...
2007-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Update Cobalt Qube series front LED support leds: Add Cobalt Raq series LEDs support leds: Rename leds-cobalt driver
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Convert corgi backlight driver into a more generic driver backlight: Add Samsung LTV350QV LCD driver backlight: Fix cr_bllcd allocations and error paths backlight/leds: Make two structs static
2007-10-11Merge branch 'dmi-const' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'dmi-const' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/firmware: const-ify DMI API and internals
2007-10-11Merge branch 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits) [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=n compat_ioctl: move floppy handlers to block/compat_ioctl.c compat_ioctl: move cdrom handlers to block/compat_ioctl.c compat_ioctl: move BLKPG handling to block/compat_ioctl.c compat_ioctl: move hdio calls to block/compat_ioctl.c compat_ioctl: handle blk_trace ioctls compat_ioctl: add compat_blkdev_driver_ioctl() compat_ioctl: move common block ioctls to compat_blkdev_ioctl Sysace: Don't enable IRQ until after interrupt handler is registered Sysace: sparse fixes Sysace: Minor coding convention fixup drivers/block/umem: use DRIVER_NAME where appropriate drivers/block/umem: trim trailing whitespace drivers/block/umem: minor cleanups drivers/block/umem: use dev_printk() drivers/block/umem: move private include away from include/linux Sysace: Labels in C code should not be indented. Sysace: Add of_platform_bus binding Sysace: Move IRQ handler registration to occur after FSM is initialized Sysace: minor rework and cleanup changes ...