aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-03-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT address [ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems [ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value. [ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV. [ARM] 4251/1: Fix sharpsl_pm dependency [ARM] 4250/1: Fix locomo backlight conversion error/compile failure [ARM] 4249/1: Fix tosa compile failure [ARM] 4248/1: lh7a40x: fix missing definitions for get_irqnr_preamble [ARM] 4247/1: Fix long name for cc9p9360dev ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent works ARM: OMAP: Fix missing workqueue include in board-h2.c ARM: OMAP: Include missing header
2007-03-12[ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT addressMilan Svoboda
This fixs address defines for IXP4XX_NPE[ABC]_BASE_VIRT. They are defined as (IXP4XX_PERIPHERAL_BASE_PHYS + 0x[678]000) now, but they should be defined as (IXP4XX_PERIPHERAL_BASE_VIRT + 0x[678]000). Note PHYS vs VIRT in IXP4XX_PERIPHERAL_BASE... Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problemsPavel Pisa
The SDHC controllers cannot process shorter transfers. They has to be handled as longer ones, but it such case CRC error is evaluated. There was a case in the code still, where this error is not ignored as it should to be process these transfers. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.Pavel Pisa
Only System PLL clock source is selectable by CSCR_SYSTEM_SEL bit. MPU PLL is driven by 512*CLK32 for each case. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.Pavel Pisa
The minimal bus clock prescaler should be kept at value selected by the board / boot loader designer. Switching frequency above startup limit could lead to the external memory/devices misbehave. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-10Revert "USB: pxa2xx_udc: fix hardcoded irq number"Linus Torvalds
This reverts commit d2487cb4257dafb686f682285854fe7f02ca29d8. Russell King points out that it's obviously bogus, and I have to agree. Not only does "irq" not even exist in that scope, but we obviously need to free the irq that we actually requested, and that's IRQ_USB. Reported-by: Russell King <rmk@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net>, Cc: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-09Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6] fix ipv6_getsockopt_sticky copy_to_user leak [IPV6]: Fix for ipv6_setsockopt NULL dereference [DCCP]: Initialise write_xmit_timer also on passive sockets [IPV4]: Fix rtm_to_ifaddr() error handling.
2007-03-09Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] refresh config files [IA64] put kdump_find_rsvd_region in __init [IA64] Remove sparse warning from unwind code [IA64] add missing syscall trace clear [IA64] Cleanup in crash.c [IA64] kexec: declare ia64_mca_pal_base in mca.h rather than kexec.h [IA64] pci_get_legacy_ide_irq should return irq (not GSI) [IA64] whitespace fixes for include/asm-ia64/sal.h [IA64] Cache error recovery [IA64] Proper handling of TLB errors from duplicate itr.d dropins
2007-03-09Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: kobject: new_device->kref wasn't putted after error in kobject_move() driver core: export device_rename Remove devfs from MAINTAINERS Driver core: add device symlink back to sysfs Revert "driver core: refcounting fix"
2007-03-09Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: pci: fix section mismatch warning PCI: aer: fix section mismatch warning pcie: fix section mismatch warning PCI: allow multiple calls to pcim_pin_device()
2007-03-09Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (23 commits) USB Elan FTDI: check for workqueue creation USB: fix spinlock recursion in cdc-acm.c USB: fix Unaligned access in EHCI driver USB: Product ID for FT232RL in ftdi_sio USBNET: DM9501: Add Corega FEther USB-TXC support. USB: ipaq.c: Additional devices USB: further fix for usb-serial USB: fix usb-serial device naming bug USB: RTS/DTR signal patch for airprime driver USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer usb-serial: fix shutdown / device_unregister order USB: add Additional PIDs in ftdi_sio USB: add QL355P power supply ids to fdti_sio USB: New device IDs for cp2101 driver USB: kill dead code from hub.c USB: ratelimit debounce error messages USB: pxa2xx_udc: fix hardcoded irq number UHCI: fix port resume problem USB: set the correct interval for interrupt URBs USB: goku_udc: Remove crude cache coherency code ...
2007-03-09Pull misc-for-upstream into release branchLen Brown
2007-03-09Pull bugzilla-8110 into release branchLen Brown
2007-03-09Pull bugzilla-8066 into release branchLen Brown
2007-03-09Pull bugzilla-7907 into release branchLen Brown
2007-03-09Pull bugzilla-7570 into release branchLen Brown
2007-03-09Pull bugzilla-6859 into release branchLen Brown
2007-03-09Pull bugzilla-6316 into release branchLen Brown
2007-03-09Pull bugzilla-5966 into release branchLen Brown
2007-03-09Pull ibm into release branchLen Brown
2007-03-09Pull altix into release branchLen Brown
2007-03-09ACPI: ec: fix race in status register accessAlexey Starikovskiy
Delay the read of the EC status register until after the event that caused it occurs -- otherwise it is possible to read and act on stale status that was associated with the previous event. Do this with a perpetually incrementing "event_count" to detect when a new event occurs and it is safe to read status. There is no workaround for polling mode -- it is inherently exposed to reading and acting on stale status, since it doesn't have an interrupt to tell it the event completed. http://bugzilla.kernel.org/show_bug.cgi?id=8110 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-09USB Elan FTDI: check for workqueue creationCyrill Gorcunov
Avoid NULL pointer usage if workqueue creation failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix spinlock recursion in cdc-acm.cOliver Neukum
this fixes the spinlock recursion issue. The older fix was incomplete. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix Unaligned access in EHCI driverMax Dmitrichenko
I get following warnings on spar64: Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd] Despite of the comment in the patched code, the type cast used there does make unaligned access. The fix was made as it's done in ohci-hub.c. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: Product ID for FT232RL in ftdi_sioGard Spreemann
Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USBNET: DM9501: Add Corega FEther USB-TXC support.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: ipaq.c: Additional devicesAndre Spahlinger
Additional devices Signed-off-by: Andre Spahlinger <uenz@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: further fix for usb-serialOliver Neukum
this is a fix for the outstanding usb-serial issues. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix usb-serial device naming bugOliver Neukum
Am Montag, 26. Februar 2007 15:16 schrieb Craig Schlenter: > Hi Greg > > 34ef50e5b1f96c2d8c0f3d28b7d407743806256c is definitely > the source of the problem. Reverting that makes the > ftdi port show up as ttyUSB0 again for me and it > can actually be opened. This patch should fix the issue. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Craig Schlenter <craig@codefountain.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: RTS/DTR signal patch for airprime driverMartin Schiller
I encountered some problems with the airprime driver in use with a Novatel Merlin XU870: Closing an open Connection to e.g. /dev/ttyUSB0 doesn't reset the RTS/DTR lines of the Modem. Consequently, when I use minicom to establish a connection by "ATD*99#" the modem doesn't hang up even if i exit minicom and so I cannot reuse the modem unless I remove it and plug it in again. With the attached patch, the RTS/DTR lines are resetted on a close. The code was mainly taken from the option.c driver.
2007-03-09USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the ↵Jim Radford
latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09usb-serial: fix shutdown / device_unregister orderJim Radford
Ensure that the ->port_remove() callbacks get called before the ->shutdown() callback which makeing the order symmetric with ->attach() being called before ->port_probe(). Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add Additional PIDs in ftdi_sioThomas Schleusener
I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add QL355P power supply ids to fdti_sioMichael Olberg
2007-03-09USB: New device IDs for cp2101 driverJon K Hellan
Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: kill dead code from hub.cOliver Neukum
this kills residual obsoletet code from hub.c Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: ratelimit debounce error messagesOliver Neukum
flaky hardware can cause a lot of debounce failed messages. To limit the performance impact, a ratelimit should be used. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda
This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09UHCI: fix port resume problemAlan Stern
This patch (as863) fixes a problem encountered sometimes when resuming a port on a UHCI controller. The hardware may turn off the Resume-Detect bit before turning off the Suspend bit, leading usbcore to think that the port is still suspended and the resume has failed. The patch makes uhci_finish_suspend() wait until both bits are safely off. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: set the correct interval for interrupt URBsAlan Stern
This patch (as862) fixes a couple of bugs in the way usbcore handles intervals for interrupt URBs. usb_interrupt_msg (and usb_bulk_msg for backward compatibility) don't set the interval correctly for high-speed devices. proc_do_submiturb() doesn't set it correctly when a bulk URB is submitted to an interrupt endpoint. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: goku_udc: Remove crude cache coherency codeRalf Baechle
This is deep architecture specific magic and does should not to exist in a driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB storage: Nokia 6288 unusual_devs entryAndrew Nayenko
This patch adds an usual_devs entry for the Nokia 6288. Originally from Andrew with a re-diff by Phil. From: Andrew Nayenko <relan@bk.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB storage: Removed duplicate supertop unusual_dev entryPhil Dibowitz
This patch removes the duplicate supertop entries that made it into the .21 rc kernels. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: at91_udc, fix more modpost bogosity (rename driver struct)David Brownell
Rename the driver struct used with at91_udc to prevent yet another bogus warning from "modpost". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09ACPI: Kconfig: hide ACPI menu when CONFIG_PM=nRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-09ACPI: video: Fix spelling and grammar mistakesJulius Volz
Correct some of the most obvious spelling and grammar mistakes in drivers/acpi/video.c (comments and printk output). Signed-off-by: Julius Volz <juliusrv@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-09ACPI: make blacklist more verboseAnthony Godshall, Ampro Computers, Inc
IMHO, ACPI disabled due to DMI failure or blacklisted year should be noted, as is done with other ACPI blacklisting. This will help people troubleshoot when ACPI isn't working. Status quo is a mysterious "ACPI Disabled" message without explanation on BIOS that implements ACPI but not DMI. This is actually fairly common on embedded x86 boards. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-09asus-laptop: make code staticAdrian Bunk
This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-09[IPV6] fix ipv6_getsockopt_sticky copy_to_user leakChris Wright
User supplied len < 0 can cause leak of kernel memory. Use unsigned compare instead. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:09:17 +0000