aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-20V4L/DVB (8098): xc5000: add module option to load firmware during driver attachMichael Krufky
The xc5000 firmware download process can be slow on certain devices. Add a module option, "init_fw" to perform the firmware download during xc5000_attach(), which would get the firmware download over with well before any tune request is made. When this option is enabled, it will reduce the time it takes to get a signal lock during the first tune after driver load, but will add a few seconds to the driver initialization. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8095): zoran_driver.c: Removed duplicated includeHuang Weiyi
Removed duplicated include file <asm/byteorder.h> in drivers/media/video/zoran_driver.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8093): cx18: fix prefix typoHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8090): ivtv: yuv decoder lock fix (2)Ian Armstrong
The IVTV_IOC_DMA_FRAME ioctl fails to correctly 'start' the decoder. Although yuv output will be correct, some functions which should be disabled while the decoder is in use remain enabled. This can result in hardware registers being corrupted, causing problems with the mpeg decoder. This patch ensures the decoder 'start' sequence is called, disabling these functions until the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM cardSri Deevi
Patch provided courtesy of Conexant http://www.conexant.com. Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8088): ivtv: yuv decoder lock fixIan Armstrong
write() operations to the yuv device may not always 'start' the decoder. Although yuv output will be correct, some functions which should be disabled while the decoder is in use remain enabled. This can result in hardware registers being corrupted, causing problems with the mpeg decoder. This patch simply moves the existing decoder 'start' sequence to earlier in the write() handler. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8087): cx18: make sure all v4l2_format fields are filled inHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handlingHans Verkuil
If the capture is scaled, then the video_temporal_filter is set to 0 by the cx2341x.c module since otherwise you would get ghosting. However, this was also done in the VIDIOC_S_FMT ioctl which meant that the video_temporal_filter control was reset to 0 or 8 each time S_FMT was called. This was old code that should have been removed a long time ago. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8085): ivtv: fill in all v4l2_framebuffer fields in VIDIOC_G/S_FBUFHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION testsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8083): videodev: zero fields for ENCODER_CMD and ↵Hans Verkuil
VIDIOC_G_SLICED_VBI_CAP This avoids the need of memsets in the ivtv/cx18 drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8082): cx18: convert to video_ioctl2()Andy Walls
cx18: convert driver to use video_ioctl2(). Pushed down ioctl debug messages and priority checks as well. Still left serialization lock in place for now. #if 0'ed out sliced vbi ioctl code for now. Patch heavily based on similar changes made to ivtv by Hans Verkuil. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8081): ivtv: remove obsolete arrays.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8080): ivtv: make sure all v4l2_format fields are filled inHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8079): ivtv: Convert to video_ioctl2.Hans Verkuil
Based on an initial conversion patch from Douglas Landgraf. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8078): Introduce "index" attribute for persistent video4linux ↵brandon@ifup.org
device nodes A number of V4L drivers have a mod param to specify their preferred minors. This is because it is often desirable for applications to have a static /dev name for a particular device. However, using minors has several disadvantages: 1) the requested minor may already be taken 2) using a mod param is driver specific 3) it requires every driver to add a param 4) requires configuration by hand This patch introduces an "index" attribute that when combined with udev rules can create static device paths like this: /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0 /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video1 /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video2 $ ls -la /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0 lrwxrwxrwx 1 root root 12 2008-04-28 00:02 /dev/v4l/by-path/pci-0000:00:1d.2-usb-0:1:1.0-video0 -> ../../video1 These paths are steady across reboots and should be resistant to rearranging across Kernel versions. video_register_device_index is available to drivers to request a specific index number. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Kees Cook <kees@outflux.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8076): budget-ci: Support the bundled remote control of the TT ↵Oliver Endriss
DVB-C 1501 Support the bundled remote control of the TT DVB-C 1501 Thanks-to: SG <SiestaGomez@web.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8072): av7110: Removed some obsolete definitions and one unused ↵Oliver Endriss
variable Removed some obsolete definitions and one unused variable. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8065): Add missing selects at dvb-usb/KconfigMauro Carvalho Chehab
Add missing auto-selects for MEDIA_TUNER_XC2028 and DVB_TDA1004X at dvb-usb/Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8060): Kconfig: MEDIA_TUNER_CUSTOMIZE should be disabled by defaultMichael Krufky
The build option, MEDIA_TUNER_CUSTOMIZE, allows us to disable tuner drivers that would have otherwise been selected by default. This is an advanced customization option that should be disabled by default. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8059): Add missing select for MEDIA_TUNER_TDA827XMauro Carvalho Chehab
$ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \; linux/drivers/media/dvb/dvb-usb/m920x.c linux/drivers/media/dvb/ttpci/budget-ci.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8051): ttpci/Kconfig: Technotrend budget C-1501 needs tda10023Mauro Carvalho Chehab
Auto-selects tda10023, for budget-ci, if !DVB_FE_CUSTOMISE. This is needed for Technotrend budget C-1501 dvb board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8050): Add register get/set debug ioctls to saa7134Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8049): budget-ci: Add support for Technotrend budget C-1501 dvb-c cardSigmund Augdal
The following experimental patch adds support for the technotrend budget C-1501 dvb-c card. The parameters used to configure the tda10023 demod chip are largely determined experimentally, but works quite for me in my initial tests. Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8047): bt8xx: i2c structure templates clean-upJean Delvare
Clean up the use of structure templates in bttv-i2c. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. This clean-up shrinks bttv-i2c.o by 29% (x86_64). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8046): zoran: i2c structure templates clean-upJean Delvare
Clean up the use of structure templates in zoran_card. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8032): Anysee: fix KconfigAntti Palosaari
- select DVB_PLL - fix typos in comments Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4Antti Palosaari
- support for Anysee E30C Plus rev 0.4 - set IO port E - set correct TS mode - change deltaf according to latest Windows driver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8030): TDA10023: make TS output mode configurableAntti Palosaari
- make TS output mode configurable Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8024): vivi: rename MODULE_NAME macro to VIVI_MODULE_NAME to avoid ↵Mauro Carvalho Chehab
namespace conflicts Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8023): vivi: announce that it is registered as /dev/video%dCarl Karsten
Signed-off-by: Carl Karsten <carl@personnelware.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8021): Beholder's cards descriptionDmitry Belimov
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63 has chip with AC3 codec, M6 Extra has other type of HF module. Add correct data for support MPEG encoder. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8019): New for I2S on for MPEG of saa7134_empressDmitry Belimov
Rework saa7134_enable_i2s function. Remove vendor specific data. Configure I2S output port specific for model of SAA7133/5-SAA7134. I think it is more good. Renamed definition of I2S audio output control register. It`s SAA7133/5 register Start video port after configuring procedure. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8014): gl861: coding style fixesAntti Palosaari
- coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8006): em28xx: Split HVR900 into two separate entriesDevin Heitmueller
- Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> [mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7997): si470x: hardware frequency seek supportTobias Lorenz
This patch brings the following changes: - this now finally adds hardware frequency seek support Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7996): si470x: afc indicationTobias Lorenz
This patch brings the following changes: - afc indication: device has no indication whether freq is too low or too high therefore afc always return 1, when freq is wrong Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7995): si470x: a lot of small code cleanupsTobias Lorenz
This patch brings the following changes: - comment on how to listen to an usb audio device   (i get so many questions about that...) - code cleanup (error handling, more warnings, spacing, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7994): si470x: let si470x_get_freq return errnoTobias Lorenz
This patch brings the following changes: - version bumped to 1.0.8 for all the following patches - si470x_get_freq now returns errno Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7993): si470x: move global lock to device structureTobias Lorenz
this patch brings the following changes: - move the global disconnect lock into the device structure - code cleanup (spaces to tabs, long line splits, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7992): Add support for Pinnacle PCTV HD Pro stick (the older ↵Devin Heitmueller
variant 2304:0227) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7988): soc_camera: missed fmt callback conversion.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual ExpressMichael Krufky
Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7984): tda18271: update filename in commentsMichael Krufky
This file was renamed but we forgot to change it in the comments. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7976): I2S on for MPEG of saa7134_empressDmitri Belimov
Rework saa7134_enable_i2s function. Add vendor specific data. Add definition for I2S audio output control register. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7952): AU6610: various cosmetic changesAntti Palosaari
- update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7951): AU6610: remove useless identify_stateAntti Palosaari
- remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7950): AU6610: coding style fixesAntti Palosaari
- coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7949): videodev: renamed the vidioc_*_fmt_* callbacksHans Verkuil
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match the v4l2_buf_type name. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 16:51:40 +0000