aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-10V4L/DVB (4805): Dib0700: Add support for Leadtek Winfast DTV Dongle ↵Michael Krufky
(STK7700P based) This patch adds support for the new, STK7700-based revision of the Leadtek Winfast DTV Dongle. Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4798): OmniVision OV7670 driverJonathan Corbet
This patch adds a V4L2 driver for the OmniVision OV7670 camera. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4797): Marvell 88ALP01 "cafe" driverJonathan Corbet
A driver for the Marvell M88ALP01 "CAFE" CMOS integrated camera controller. This driver has been renamed "cafe_ccic" since my previous patch set. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4796): A couple of V4L2 defines needed by Cafe Camara driverJonathan Corbet
Two defines for V4L2, needed by the Cafe camera driver: 1) Add the RGB444 image format 2) Add the "init" internal command which is separate from "reset". Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4794): Dvb: dibx000_common-fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4792): Add support for the Compro Videomate DVB-T200AHartmut Hackmann
This board has the same PCI ID as the T200, so the exact board type is determined from the eeprom. The original patch was provided by Francis Barber <fedora@barber-family.id.au> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4791): Added autodetected flag to the saa7134_dev structureHartmut Hackmann
In case the exact board type needs to be determined by probing or evaluating the eeprom, this flag allows to still set the board type via the card=xx insmod option. This is an extract of a patch by Francis Barber. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4789): Lgdt330x: SNR and signal strength reportingTrent Piepho
Update the SNR calculations to use the new dvb_math log function, and add SNR calculations for all supported modulations for both lg dt3302 and dt3303. The QAM equations don't appear in the dt3302 datasheet, so the ones from the dt3303 datasheet were used. SNR returned is the actual value in dB as 8.8 fixed point. Reporting of real signal strength isn't supported, so rather than return 0, which confuses some software and users, a re-scaled SNR value is returned. Code originally by Rusty Scott. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4788): Tda8083: support for uncorrectable blocks and bit error rateChristoph Haubrich
Copied routines for uc blocks and BER from the removed tda80xx.c into tda8083.c. Signed-off-by: Christoph Haubrich <christoph1.haubrich@arcor.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4778): Fixed device countPatrick Boettcher
Forgot to increase the device count for the STK7700P-devices Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4776): Adding USB IDs for Uniwill STK7700P-ref-designHenning Schroeer
Adding USB IDs for Uniwill STK7700P-ref-design Signed-off-by: Henning Schroeer <post@henning-schroeder.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4775): [patch] Add Compro USB IDsTomi Koivulahti
This patch adds Compro Videomate U500 to supported devices. Signed-off-by: Tomi Koivulahti <birchbay@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4773): Misc fixes for DiB3000 and DiB7000Patrick Boettcher
This patch contains several fixes for the autosearch algorithm and other small ones. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4772): Add support for DiBcom DiB7000PCPatrick Boettcher
This patch contains support for the DiB7000PC-driver. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4769): Added support for a ASUSTEK P7131 Dual DVB-T variantHartmut Hackmann
This card has no firmware eeprom. The old version still should not need a firmware file due to an undocumented feature of the TDA10046. The patch also includes Hermann Pitton's proposal for improved antenna switch handling Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4768): Add the Asus P7131 Dual hybrid to the new tda8290_i2c_gate_ctrlHermann Pitton
The gate control was moved to a separate function. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4767): Make Remote control of the Pinnacle PCTV 310i workHartmut Hackmann
The remote control works, but we still need a better keymap. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4766): Add working dib7000m-modulePatrick Boettcher
First working version of the dib7000m-driver. This commit also makes the Hauppauge NOVA-T Stick working. Signed-off-by: Francois Kanounnikoff <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4765): Dvb-usb/vp7045.c patch for extra keyLuke Deller
Add support for more keys on the remote control included with the DigitalNow tinyUSB2 DVB-T Receiver. Signed-off-by: Luke Deller <luke@deller.id.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4763): Pvrusb2: Implement IR reception for 24xxx devicesMike Isely
Unlike 29xxx devices, the 24xxx model series does not have a dedicated I2C device for reception of IR codes. Instead IR is handled directly by the FX2 microcontroller and the results are communicated via commands to the FX2. Rather than implement a whole new IR reception pathway for 24xxx devices, this changeset instead emulates the presence of the 29xxx device's I2C based IR receiver by intercepting commands to that chip and issuing appropriate FX2 commands to do the needed action. This has the result of allowing all the usual IR frameworks (ir-kbd-i2c or lirc) to continue working unmodified for 24xxx devices. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4761): Stv680.c: check kmalloc() return value.Amit Choudhary
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4759): Cx88: use external adc for rca audio inputs on the ASUS PVR-416Michael Krufky
For the ASUS PVR-416, the external adc must be used for the rca audio inputs, but television / radio inputs use the internal adc. Thanks to Alex Deucher for lending his card to me. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4758): Cx88: use external adc for svideo/compositeMichael Krufky
For the KWorld HardwareMpegTV XPert, the external adc must be used for svideo / composite inputs, but television / radio inputs use the internal adc. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4757): Cx88: determine whether or not to use external adcMichael Krufky
Some cx88-blackbird boards use an external adc, but not necessarily for all inputs. Thus, this needs to be configurable on the card level for each input. This patch allows for the usage of the external adc to be determined by a bit setting in the cx88_input struct for cards based on the cx88 blackbird design. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4756): Cx88: cleanupsMichael Krufky
- fixed whitespace, replaced leading spaces with tabs - moved .mpeg descriptor below input settings Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4754): Cxusb: update copyright and author email addressMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4753): Cxusb: rename cxusb_lgdt3303_tuner_attach Michael Krufky
cxusb_lgdt3303_tuner_attach were renamed to cxusb_lgh064f_tuner_attach Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4749): Fixed DVB-USB-Adapter indentionPatrick Boettcher
While converting everything to DVB-USB-Adapter, there was a wrong indention. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4736): Cx88-blackbird module is rejected during probe.Steven Toth
If the last cx88 board probed is not backbird based, and a previous board was, the entire module is unloaded leading to an oops during mpeg_open on the first /dev/videoN device. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4728): Add support for AverMedia AverTV Studio 507Mikhail Fedotov
This is just an additional analog board configuration. Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4726): Add support for Pinnacle 310iHartmut Hackmann
The driver supports analog TV, radio and DVB-T. It is based on the preliminary patch by Pierluigi Rolando. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4723): Bugfix: Select the correct cx8802_dev when enumerating by ↵Steven Toth
CX88_MPEG_type A bug in cx8802_get_driver() meant that in multiboard environments, when testing frontends on the non primary board, the incorrect device was returned resulting in "Unsupported value in .mpeg.." messages. Depending on the electrical design of the hardware (serial, parallel, rising/falling edge detect), transport would still be delivered and the problem went unnoticed. This patch ensures the correct instance of cx8802_dev is returned. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4676): Dynamic cx88 mpeg port management for HVR1300 MPEG2/DVB-T ↵Steven Toth
support. A series of patches to change the cx88 framework to allow the PCI mpeg port to be shared dynamically between different types of drivers or applications. This patch changes the cx88-dvb and cx88-blackbird drivers to become 'sub drivers' of a higher single cx88-mpeg driver. The cx88-mpeg driver is a superset of the previous cx88-mpeg/blackbird drivers and now owns the IRQ. cx88-dvb/blackbird now become mini drivers, registering themselves with cx88-mpeg through a standard interface with callbacks. Sub drivers request access to hardware via the cx88-mpeg driver. In turn the cx88-mpeg driver determines whether the hardware is busy and accepts or refuses the request, grant access using callbacks into the sub drivers. The net effect is that you are no longer able to tamper with the mpeg port from multiple different applications at the same time, potentially breaking a live mpeg2 hardware encoding or dvb stream. The mechanism extends to enable multiple dvb frontends to be registered and share the single resource. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4524): Initial commit for the DiB7000M-demodPatrick Boettcher
Initial commit for the driver for the DiB7000M COFDM demodulator. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4722): Cx88: Add support for VIDIOC_INT_[SR]_REGISTER ioctlsTrent Piepho
Add support for the advanced debugging ioctls, to allow access to the cx88 registers from userspace. Only i2c_id == 0 is supported, for access to the cx88 adapter itself. There isn't any support for access to I2C clients of the adapter. Most of them don't have R/W registers anyway, and its necessary to use i2c-dev to talk to them from userspace. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4777): Correct AVerMedia Volar USB IDPatrick Boettcher
correct AVerMedia Volar USB ID Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-09Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS [PATCH] i386: Fix io_apic.c warning [PATCH] i386: export smp_num_siblings for oprofile [PATCH] x86: Work around gcc 4.2 over aggressive optimizer [PATCH] x86: Fix boot hang due to nmi watchdog init code [PATCH] x86: Fix verify_quirk_intel_irqbalance() [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig
2006-12-09[PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWSRandy Dunlap
Since Voyager and Visual WS already define ARCH_SETUP, it looks like PARAVIRT shouldn't be offered for them. In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2006-12-09[PATCH] i386: Fix io_apic.c warningAndi Kleen
gcc 4.2 warns linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’: linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function The warning is false, but somewhat legitimate so work around it. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] i386: export smp_num_siblings for oprofileRandy Dunlap
oprofile uses smp_num_siblings without testing for CONFIG_X86_HT. I looked at modifying oprofile, but this way is cleaner & simpler and I didn't see a good reason not to just export it when CONFIG_SMP. WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] x86: Work around gcc 4.2 over aggressive optimizerAndi Kleen
The new PDA code uses a dummy _proxy_pda variable to describe memory references to the PDA. It is never referenced in inline assembly, but exists as input/output arguments. gcc 4.2 in some cases can CSE references to this which causes unresolved symbols. Define it to zero to avoid this. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] x86: Fix boot hang due to nmi watchdog init codeRavikiran G Thirumalai
2.6.19 stopped booting (or booted based on build/config) on our x86_64 systems due to a bug introduced in 2.6.19. check_nmi_watchdog schedules an IPI on all cpus to busy wait on a flag, but fails to set the busywait flag if NMI functionality is disabled. This causes the secondary cpus to spin in an endless loop, causing the kernel bootup to hang. Depending upon the build, the busywait flag got overwritten (stack variable) and caused the kernel to bootup on certain builds. Following patch fixes the bug by setting the busywait flag before returning from check_nmi_watchdog. I guess using a stack variable is not good here as the calling function could potentially return while the busy wait loop is still spinning on the flag. AK: I redid the patch significantly to be cleaner Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] x86: Fix verify_quirk_intel_irqbalance()Andi Kleen
Fix verify_quirk_intel_irqbalance(). genapic checks should really happen only on affected versions of the E7520/E7320/E7525 based platforms. AK: This should akpm's Coyote SDV Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] i386: Update defconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09[PATCH] x86-64: Update defconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-09Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606 drm: add flag for mapping PCI DMA buffers read-only. drm: fix up irqflags in drm_lock.c drm: i915 updates drm: i915: fix up irqflags arg drm: i915: Only return EBUSY after we've established we need to schedule a new swap. drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap(). drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to. drm: Make handling of dev_priv->vblank_pipe more robust. drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks. drm: Core vsync: Don't clobber target sequence number when scheduling signal. drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS. drm: Make locked tasklet handling more robust. drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended. drm: Change first valid DRM drawable ID to be 1 instead of 0. drm: drawable locking + memory management fixes + copyright drm: Add support for interrupt triggered driver callback with lock held to DRM core. drm: Add support for tracking drawable information to core drm: add support for secondary vertical blank interrupt to i915 ...
2006-12-09[PATCH] WorkStruct: Use direct assignment rather than cmpxchg()David Howells
Use direct assignment rather than cmpxchg() as the latter is unavailable and unimplementable on some platforms and is actually unnecessary. The use of cmpxchg() was to guard against two possibilities, neither of which can actually occur: (1) The pending flag may have been unset or may be cleared. However, given where it's called, the pending flag is _always_ set. I don't think it can be unset whilst we're in set_wq_data(). Once the work is enqueued to be actually run, the only way off the queue is for it to be actually run. If it's a delayed work item, then the bit can't be cleared by the timer because we haven't started the timer yet. Also, the pending bit can't be cleared by cancelling the delayed work _until_ the work item has had its timer started. (2) The workqueue pointer might change. This can only happen in two cases: (a) The work item has just been queued to actually run, and so we're protected by the appropriate workqueue spinlock. (b) A delayed work item is being queued, and so the timer hasn't been started yet, and so no one else knows about the work item or can access it (the pending bit protects us). Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so it can be assigned instead. So, replacing the set_wq_data() with a straight assignment would be okay in most cases. The problem is where we end up tangling with test_and_set_bit() emulated using spinlocks, and even then it's not a problem _provided_ test_and_set_bit() doesn't attempt to modify the word if the bit was set. If that's a problem, then a bitops-proofed assignment will be required - equivalent to atomic_set() vs other atomic_xxx() ops. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-09[PATCH] Amiga PCMCIA NE2000 Ethernet dev->irq initKars de Jong
Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-09[PATCH] m68k: EXPORT_SYMBOL(cache_{clear,push}) bogus commentGeert Uytterhoeven
Remove bogus comments about unexporting cache_{push,clear}(), as inline dma_cache_maintenance() (used by at least bionet and pamsnet) calls them. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-09[PATCH] m68k/Atari: 2.6.18 Atari IDE interrupt needs SA_SHIRQMichael Schmitz
Atari IDE: The interrupt needs SA_SHIRQ now to get registered. Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>