aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-30x86: fix overlap between pagetable with bss sectionYinghai Lu
one early crash on one 8 node 256g machine: Command line: console=uart8250,io,0x3f8,115200n8 initrd=kernel.org/mydisk11_x86_64.gz rw root=/dev/ram0 debug initcall_debug apic=debug acpi.debug_level=0x0000000f pci=routeirq ip=dhcp load_ramdisk=1 ramdisk_size=131072 BOOT_IMAGE=kernel.org/bzImage_2.6.25_k8.1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable) BIOS-e820: 00000000dffe0000 - 00000000dffee000 (ACPI data) BIOS-e820: 00000000dffee000 - 00000000dffff050 (ACPI NVS) BIOS-e820: 00000000dffff050 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000004020000000 (usable) Early serial console at I/O port 0x3f8 (options '115200n8') console [uart0] enabled end_pfn_map = 67239936 Kernel panic - not syncing: Duplicated early reservation d40000-e42000 Pid: 0, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #3 Call Trace: [<ffffffff80221545>] lapic_get_maxlvt+0x0/0x10 [<ffffffff80221657>] clear_local_APIC+0x5/0xcf [<ffffffff80221726>] disable_local_APIC+0x5/0x17 [<ffffffff8021fe16>] smp_send_stop+0x46/0x4c [<ffffffff80235293>] panic+0x94/0x13e [<ffffffff80bc3b03>] sctp_eps_proc_init+0x12/0x34 [<ffffffff80b9f1c5>] reserve_early+0x30/0x6c [<ffffffff80803925>] init_memory_mapping+0x2cd/0x2dc [<ffffffff80b9dc01>] setup_arch+0x21f/0x44e [<ffffffff80b978be>] start_kernel+0x6f/0x2c7 [<ffffffff80b971cc>] _sinittext+0x1cc/0x1d3 it turns out there is overlap between pgtable and bss... in System.map we have ffffffff80d40420 b rsi_table ffffffff80d40620 B krb5_seq_lock ffffffff80d40628 b i.20437 ffffffff80d40630 b xprt_rdma_inline_write_padding ffffffff80d40638 b sunrpc_table_header ffffffff80d40640 b zero ffffffff80d40644 b min_memreg ffffffff80d40648 b rpcrdma_tk_lock_g ffffffff80d40650 B sctp_assocs_id_lock ffffffff80d40658 B proc_net_sctp ffffffff80d40660 B sctp_assocs_id ffffffff80d40680 B sysctl_sctp_mem ffffffff80d40690 B sysctl_sctp_rmem ffffffff80d406a0 B sysctl_sctp_wmem ffffffff80d406b0 b sctp_ctl_socket ffffffff80d406b8 b sctp_pf_inet6_specific ffffffff80d406c0 b sctp_pf_inet_specific ffffffff80d406c8 b sctp_af_v4_specific ffffffff80d406d0 b sctp_af_v6_specific ffffffff80d406d8 b sctp_rand.33270 ffffffff80d406dc b sctp_memory_pressure ffffffff80d406e0 b sctp_sockets_allocated ffffffff80d406e4 b sctp_memory_allocated ffffffff80d406e8 b sctp_sysctl_header ffffffff80d406f0 b zero ffffffff80d406f4 A __bss_stop ffffffff80d406f4 A _end need to round up table_start to PAGE_SIZE. also make the panic more informative. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add PCI IDs to k8topology_64.cJoachim Deguara
This just adds the PCI IDs of AMD's family 10h and 11h CPU's northbridges to k8topology discovery. Signed-off-by: Joachim Deguara <joachim.deguara@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix early_ioremap pagetable opsJeremy Fitzhardinge
Put appropriate pagetable update hooks in so that paravirt knows what's going on in there. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use the same pgd_list for PAE and 64-bitJeremy Fitzhardinge
Use a standard list threaded through page->lru for maintaining the pgd list on PAE. This is the same as 64-bit, and seems saner than using a non-standard list via page->index. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: defer cr3 reload when doing pud_clear()Jeremy Fitzhardinge
PAE mode requires that we reload cr3 in order to guarantee that changes to the pgd will be noticed by the processor. This means that in principle pud_clear needs to reload cr3 every time. However, because reloading cr3 implies a tlb flush, we want to avoid it where possible. pud_clear() is only used in a couple of places: - in free_pmd_range(), when pulling down a range of process address space, and - huge_pmd_unshare() In both cases, the calling code will do a a tlb flush anyway, so there's no need to do it within pud_clear(). In free_pmd_range(), the pud_clear is immediately followed by pmd_free_tlb(); we can hook that to make the mmu_gather do an unconditional full flush to make sure cr3 gets reloaded. In huge_pmd_unshare, it is followed by flush_tlb_range, which always results in a full cr3-reload tlb flush. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early boot debugging via FireWire (ohci1394_dma=early)Bernhard Kaindl
This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't special-case pmd allocations as muchJeremy Fitzhardinge
In x86 PAE mode, stop treating pmds as a special case. Previously they were always allocated and freed with the pgd. The modifies the code to be the same as 64-bit mode, where they are allocated on demand. This is a step on the way to unifying 32/64-bit pagetable allocation as much as possible. There is a complicating wart, however. When you install a new reference to a pmd in the pgd, the processor isn't guaranteed to see it unless you reload cr3. Since reloading cr3 also has the side-effect of flushing the tlb, this is an expense that we want to avoid whereever possible. This patch simply avoids reloading cr3 unless the update is to the current pagetable. Later patches will optimise this further. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: shrink some ifdefs in fault.cHarvey Harrison
The change from current to tsk in do_page_fault is safe as this is set at the very beginning of the function. Removes a likely() annotation from the 64-bit version, this could have instead been added to 32-bit. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: ignore spurious faultsJeremy Fitzhardinge
When changing a kernel page from RO->RW, it's OK to leave stale TLB entries around, since doing a global flush is expensive and they pose no security problem. They can, however, generate a spurious fault, which we should catch and simply return from (which will have the side-effect of reloading the TLB to the current PTE). This can occur when running under Xen, because it frequently changes kernel pages from RW->RO->RW to implement Xen's pagetable semantics. It could also occur when using CONFIG_DEBUG_PAGEALLOC, since it avoids doing a global TLB flush after changing page permissions. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove nx_enabled from fault.cHarvey Harrison
On !PAE 32-bit, _PAGE_NX will be 0, making is_prefetch always return early. The test is sufficient on PAE as __supported_pte_mask is updated in the same places as nx_enabled in init_32.c which also takes disable_nx into account. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify fault_32|64.cHarvey Harrison
Unify includes in moved fault.c. Modify Makefiles to pick up unified file. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify fault_32|64.c with ifdefsHarvey Harrison
Elimination of these ifdefs can be done in a unified file. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify fault_32|64.c by ifdef'd function bodiesHarvey Harrison
It's about time to get on with unifying these files, elimination of the ugly ifdefs can occur in the unified file. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: arch/x86/mm/init_32.c printk fixesIngo Molnar
printk fixes. NOP in terms of functionality, but strings got a bit larger due to the KERN_ markers that were added. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: arch/x86/mm/init_32.c cleanupIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: arch/x86/mm/init_64.c printk fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify ioremapThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fixes some bugs about EFI memory map handlingHuang, Ying
This patch fixes some bugs of EFI memory handing code. - On x86_64, it is possible that EFI memory map can not be mapped via identity map, so efi_map_memmap is removed, just use early_ioremap. - On i386, the EFI memory map mapping take effect cross paging_init, so it is not necessary to use efi_map_memmap. - EFI memory map is unmapped in efi_enter_virtual_mode to avoid early_ioremap leak. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use reboot_type on EFI 32Huang, Ying
This patch makes reboot_type of BOOT_EFI is used on i386 too. Because correpsonding reboot code of i386 and x86_64 is merged. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify page fault oops printingHarvey Harrison
This changes the oops dumping format for page faults to be similar between X86_32 and 64. This is the first user of printk_address on X86_32. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: introduce show_fault_oops helper to fault_32|64.cHarvey Harrison
This will help when unifying the oops dumping code on 32/64 bit. No functional changes. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add is_errata100 helper to fault_32|64.cHarvey Harrison
Further towards unifying these files, add another helper in same spirit as is_errata93. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add is_f00f_bug helper to fault_32|64.cHarvey Harrison
Further towards unifying these files, add another helper in same spirit as is_errata93. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make ioremap() UC by defaultIngo Molnar
Yes! A mere 120 c_p_a() fixing and rewriting patches later, we are now confident that we can enable UC by default for ioremap(), on x86 too. Every other architectures was doing this already. Doing so makes Linux more robust against MTRR mixups (which might go unnoticed if BIOS writers test other OSs only - where PAT might override bad MTRRs defaults). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa cleanup the 64-bit alias mathThomas Gleixner
Cleanup the address calculations, which are necessary to identify the high/low alias mappings of the kernel on 64 bit machines. Instead of calling __pa/__va back and forth, calculate the physical address once and base the other calculations on it. Add understandable constants so we can use the already available within() helper. Also add comments, which help mere mortals to understand what this code does. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa: fix the self-testIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: rodata config hookupIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: enable CONFIG_DEBUG_PAGEALLOC more widelyIngo Molnar
make CONFIG_DEBUG_PAGEALLOC universally available. CONFIG_HIBERNATION and CONFIG_HUGETLBFS was disabling it, for no particular reason. If there are any unfixed bugs here we'll fix it, but do not disable vital debugging facilities like that .. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: init memory debuggingIngo Molnar
debug incorrect/late access to init memory, by permanently unmapping the init memory ranges. Depends on CONFIG_DEBUG_PAGEALLOC=y. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: move misplaced rodata check callArjan van de Ven
It looks like a mismerge put the rodata self-check in the wrong spot; move it to the right place after marking the .rodata section read only. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix clflush_page_range logicIngo Molnar
only present ptes must be flushed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: optimize clflushThomas Gleixner
clflush is sufficient to be issued on one CPU. The invalidation is broadcast throughout the coherence domain. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clflush_page_range needs mfenceThomas Gleixner
clflush is an unordered operation with respect to other memory traffic, including other CLFLUSH instructions. This needs proper fencing with mfence. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa: rename global_flush_tlb() to cpa_flush_all()Thomas Gleixner
The function name global_flush_tlb() suggests something different from what the function really does. Rename it to cpa_flush_all(), which is an understandable counterpart to cpa_flush_range(). no global visibility of the old API anymore. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa: implement clflush optimizationThomas Gleixner
Use clflush on CPUs which support this. clflush is only used when the page attribute operation has been successful. On CPUs which do not support clflush and in the case of error the old fashioned global_flush_tlb() is called. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa use the new set_clr functionThomas Gleixner
Convert cpa_set and cpa_clear to call the new set_clr function. Seperate out the debug helpers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa create set_and_clr functionThomas Gleixner
Create a set_and_clr function to avoid the duplicate loops. Allows also to do combined operations for optimization. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: cpa move the flush into set and clear functionsThomas Gleixner
To avoid the modification of the flush code for the clflush implementation, move the flush into the set and clear functions and provide helper functions for the debugging code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: add testcases for RODATA and NX protections/attributesArjan van de Ven
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd. I also cleaned up the NX test code quite a bit, and got rid of the ugly exception table sorting stuff. From: Arjan van de Ven <arjan@linux.intel.com> This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option as well as the NX CPU feature/mappings. Both testcases can move to tests/ once that patch gets merged into mainline. (I'm half considering moving the rodata test into mm/init.c but I'll wait with that until init.c is unified) As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h for the RODATA sections, which lead to 1 page less being marked read only. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: ioremap KERN_INFOIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: clean up change_page_attr_set/clear()Thomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: fix loopIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: fix split thinkoThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make sure initmem is writableArjan van de Ven
When we free initmem, various rodata and CPA checks may have left memory read only.. this patch ensures that the memory is writable before we free it. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix pageattr-selftestArjan van de Ven
In Ingo's testing, he found a bug in the CPA selftest code. What would happen is that the test would call change_page_attr_addr on a range of memory, part of which was read only, part of which was writable. The only thing the test wanted to change was the global bit... What actually happened was that the selftest would take the permissions of the first page, and then the change_page_attr_addr call would then set the permissions of the entire range to this first page. In the rodata section case, this resulted in pages after the .rodata becoming read only... which made the kernel rather unhappy in many interesting ways. This is just another example of how dangerous the cpa API is (was); this patch changes the test to use the incremental clear/set APIs instead, and it changes the clear/set implementation to work on a 1 page at a time basis. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove flush_agp_mappings()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: move flush to cpaThomas Gleixner
The set_memory_* and set_pages_* family of API's currently requires the callers to do a global tlb flush after the function call; forgetting this is a very nasty deathtrap. This patch moves the global tlb flush into each of the callers Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make various pageattr.c functions staticArjan van de Ven
change_page_attr_add is only used in pageattr.c now, so we can make this function static. change_page_attr() isn't used anywere at all anymore; this function is a really bad API anyway so just remove the bloat entirely. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: set_memory_notpresent()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: convert ioremap to new APIThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 04:02:53 +0000