aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-01LIB82596: correct data types for hardware addressesThomas Bogendoerfer
dma_addr_t is 64bit wide on some architectures (for example 64bit MIPS), so it's not a good idea to use it for 32bit wide addresses in descriptors. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01via-velocity: don't oops on MTU change (resend)Stephen Hemminger
The VIA veloicty driver needs the following to allow changing MTU when down. The buffer size needs to be computed when device is brought up, not when device is initialized. This also fixes a bug where the buffer size was computed differently on change_mtu versus initial setting. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01Stop phy code from returning success to unknown ioctls.David Woodhouse
This kind of sucks, and prevents the Fedora installer from using the device for network installs... [root@efika phy]# iwconfig eth0 Warning: Driver for device eth0 has been compiled with an ancient version of Wireless Extension, while this program support version 11 and later. Some things may be broken... eth0 ESSID:off/any Nickname:"" NWID:0 Channel:0 Access Point: 00:00:BF:81:14:E0 Bit Rate:-1.08206e+06 kb/s Sensitivity=0/0 RTS thr:off Fragment thr:off Encryption key:<too big> Power Management:off Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01SET_NETDEV_DEV() in fec_mpc52xx.cDavid Woodhouse
This helps to allow the Fedora installer to use the built-in Ethernet on the Efika for a network install. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01net: smc911x: only enable for mpr2 on sh.Paul Mundt
The smc911x.h is a bit of a mess, not supporting any sort of generic configuration. For the moment only ARCH_PXA and SH_MAGIC_PANEL_R2 have suitable definitions, so we reflect this in the Kconfig also. While there are other SH boards that will likely turn this on in the 2.6.25 time frame, it's not worth trying to stub around at the moment. Fixes up the allmodconfig build, as noted by akpm. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01e1000: Fix NAPI state bug when Rx completeAuke Kok
Don't exit polling when we have not yet used our budget, this causes the NAPI system to end up with a messed up poll list. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01sky2: turn of dynamic Tx watermark workaround (FE+ only)Stephen Hemminger
Add workaround for issues FE+ (A0) transmit watermark. This is copied verbatim from vendor driver sk98lin (10.22.4.3). Don't have that chip version and no more information seems to be available. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01sky2: don't use AER routinesStephen Hemminger
Using PCIE advanced error recovery stuff creates more user problems than it's worth. The AER stuff depends on MMCONFIG and in many configurations it just doesn't work. Plus it doesn't add any real functionality to the driver. The sky2 driver handles its own errors fine as is. This reverts 555382cbfc6d2187b53888190755e56f52308cd6 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01sky2: revert to access PCI config via device spaceStephen Hemminger
Using the hardware window into PCI config space is more reliable and smaller/faster than using the pci_config routines. It avoids issues with MMCONFIG etc. Reverts: 167f53d05fccb47b6eeadac7f6705b3f2f042d03 Please apply for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01cxgb - fix statsDivy Le Ray
Fix MAC stats accounting. Fix get_stats. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01cxgb - fix NAPIDivy Le Ray
netif_rx_complete() should be called only when work_done < budget. Signed-off-by: Divy Le ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01cxgb - fix T2 GSODivy Le Ray
The patch ensures that a GSO skb has enough headroom to push an encapsulating cpl_tx_pkt_lso header. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01ucc_geth: handle passing of RX-only and TX-only internal delay PHY ↵Kim Phillips
connection type parameters Extend the RGMII-Internal Delay specification case to include TX-only and RX-only variants. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01phylib: marvell: add support for TX-only and RX-only Internal DelayKim Phillips
Previously, Internal Delay specification implied the delay be applied to both TX and RX. This patch allows for separate TX/RX-only internal delay specification. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01phylib: add PHY interface modes for internal delay for tx and rx onlyKim Phillips
Allow phylib specification of cases where hardware needs to configure PHYs for Internal Delay only on either RX or TX (not both). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: MTU changing fixStephen Hemminger
The code to change MTU doesn't correctly handle all the chip variations and requirements for restarting. On Genesis chips changing MTU would just cause receiver to hang. Use a simpler approach of just taking link down/up if needed. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: serial mode register valuesStephen Hemminger
For compatiablity with sk98lin, make sure and set same values in serial mode register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge version 1.13Stephen Hemminger
Version for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: increase TX threshold for JumboStephen Hemminger
Need to increase TX threshold when doing Jumbo frames on dual port board to avoid underruns. (Code from sk98lin). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: fiber link up/down fixStephen Hemminger
The driver would not work over fibre if other end when down then came back up (would require reloading driver). The correct way to manage the link the same way for both TP and fibre. Resloves problem described in: http://lkml.org/lkml/2007/11/6/395 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: retry on MAC shutdownStephen Hemminger
Make sure and retry when shutting down the MAC. This code is copied from sk98lin driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: receive flush logicStephen Hemminger
Receive FIFO overrun is not catastrophic condition, so don't flush when it happens. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: FIFO Ram calculation errorStephen Hemminger
The calculation of usable FIFO RAM is wrong in the skge driver. First, is doesn't take into account the reserved area on the original SysKonnect Genesis boards. Second it has an off-by-one error because hw->ports is either 1 or 2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01ctc: make use of alloc_netdev()Peter Tiedemann
Currently ctc-device initialization is broken (kernel bug in ctc_new_device). The new network namespace code reveals a deficiency of the ctc driver. It should make use of alloc_netdev() as described in Documentation/networking/netdevices.txt. Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01S2io: Fixed the case when the card initialization fails on mtu changeSreenivasa Honnur
Fix the case when the card initialization fails on a mtu change and then close is called (due to ifdown), which frees non existent rx buffers. - Returning appropriate error codes in init_nic function. - In s2io_close function s2io_card_down is called only when device is up. - In s2io_change_mtu function return value of s2io_card_up function is checked and returned if it failed. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-12-01Merge branch 'master' into upstream-fixesJeff Garzik
2007-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Fix static rate if path faster than link IPoIB: Fix oops if xmit is called when priv->broadcast is NULL
2007-11-30Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix build. [MIPS] Fix use of smp_processor_id() in preemptible code.
2007-12-01[MIPS] Fix build.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-01[MIPS] Fix use of smp_processor_id() in preemptible code.Pavel Kiryukhin
Freeing prom memory: 956kb freed Freeing firmware memory: 978944k freed Freeing unused kernel memory: 180k freed BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is r4k_dma_cache_wback_inv+0x144/0x2a0 Call Trace: [<80117af8>] r4k_dma_cache_wback_inv+0x144/0x2a0 [<802e4b84>] debug_smp_processor_id+0xd4/0xf0 [<802e4b7c>] debug_smp_processor_id+0xcc/0xf0 ... CONFIG_DEBUG_PREEMPT is enabled. -- Bug cause is blast_dcache_range() in preemptible code [in r4k_dma_cache_wback_inv()]. blast_dcache_range() is constructed via __BUILD_BLAST_CACHE_RANGE that uses cpu_dcache_line_size(). It uses current_cpu_data that use smp_processor_id() in turn. In case of CONFIG_DEBUG_PREEMPT smp_processor_id emits BUG if we are executing with preemption enabled. Cpu options of cpu0 are assumed to be the superset of all processors. Can I make the same assumptions for cache line size and fix this issue the following way: Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-30IB/ehca: Fix static rate if path faster than linkJoachim Fenkes
The formula would yield -1 if the path is faster than the link, which is wrong in a bad way (max throttling). Clamp to 0, which is the correct value. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4680/1: parentheses around NR_IRQS definition [ARM] 4679/1: AT91: Change maintainer email address [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 [ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for PXA300/PXA310 [ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xx [ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processors [ARM] 4665/1: fix __und_usr wrt accessing the undefined insn in user space [ARM] 4659/1: remove possibilities for spurious false negative with __kuser_cmpxchg [ARM] 4661/1: fix do_undefinstr wrt the enabling of IRQs [ARM] uengine: fix memset size error [ARM] 4648/1: i.MX/MX1 ensure more complete AITC initialization [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK. [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio [ARM] 4604/2: AT91: Master clock divistor on SAM9 [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled [ARM] PXA ssp: unlock when ssp tries to close an invalid port [ARM] 4654/1: pxa: update default MFP register value [ARM] 4653/1: pxa: fix a gpio typo in mfp-pxa320.h [ARM] 4652/1: pxa: fix a typo of pxa27x usb host clk definition [ARM] 4651/1: pxa: add PXA3xx specific IRQ definitions
2007-11-30Fix kmem_cache_free performance regression in slabMatthew Wilcox
The database performance group have found that half the cycles spent in kmem_cache_free are spent in this one call to BUG_ON. Moving it into the CONFIG_SLAB_DEBUG-only function cache_free_debugcheck() is a performance win of almost 0.5% on their particular benchmark. The call was added as part of commit ddc2e812d592457747c4367fb73edcaa8e1e49ff with the comment that "overhead should be minimal". It may have been minimal at the time, but it isn't now. [ Quoth Pekka Enberg: "I don't think the BUG_ON per se caused the performance regression but rather the virt_to_head_page() changes to virt_to_cache() that were added later." ] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Pekka J Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29iwlwifi 4965 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi 3945 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix iwl_mac_add_interface handlerTomas Winkler
This patch fixes iwl_mac_add_interface. 1. Currently only one interface is supported, instead of silently retuning 0 now it returns -EOPNOTSUPP (By Johannes Berg) 2. It enables changing mac address from user space (By Ian Schram) Signed-off-by: Tomas Winkler <tomas@localhost.localdomain> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: linux-wireless <linux-wireless@vger.kernel.org Cc: Ian Schram <ischram@telenet.be> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: let more than one MAC event throughHolger Schurig
lbs_mac_event_disconnected() was called once and then never again upon a hardware MAC event. The reason was that the driver didn't clean the correct bit in the interrupt cause register of the chip. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: Don't set NETIF_F_IPV6_CSUM in dev->featuresDavid Woodhouse
I'm not sure why it was doing this, and I'm not sure I _want_ to know why. But calling it NETIF_F_DYNALLOC doesn't change the fact that the kernel believes it to be NETIF_F_IPV6_CSUM, and that IPv6 communication is hence buggered. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29drivers/net/wireless: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29b43/b43legacy: fix left-over URLs and ifdefsStefano Brivio
Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix possible NULL dereference in iwl_set_rate()Saleem Abdulrasool
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: x86 setup: don't recalculate ss:esp unless really necessary
2007-11-29Merge branches 'at91-fixes' and 'pxa-fixes'Russell King
2007-11-29[ARM] 4680/1: parentheses around NR_IRQS definitionRoel Kluin
If NR_IRQS is defined as a sum without surrounding parentheses, this may lead to problems when used in multiplications. This may lead to problems in: arch/ia64/sn/kernel/irq.c:516 arch/x86/kernel/io_apic_32.c:693, 694, 699, 700 fs/proc/proc_misc.c:464 Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4679/1: AT91: Change maintainer email addressAndrew Victor
Change email address of AT91 maintainer. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4675/1: pxa: fix mfp address definition error for pxa320eric miao
Signed-off-by: bridge wu <bridge.wu@marvell.com> Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for ↵eric miao
PXA300/PXA310 Some platforms (e.g. Littleton) requires LCD PCLK drive strength to be higher than default to cope with the fast PCLK frequency. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xxeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processorseric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 16:31:53 +0000