aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-06[PATCH] convert aic94xx over to using the sas transport end deviceJames Bottomley
Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-03[SCSI] make some sas class properties optionalJames Bottomley
aic94xx doesn't have a use for the bay or enclosure identifiers. Also, I think it's not going to need a get_linkerrors(), so wire up all of these exported properties as conditional on the underlying function support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] qla2xxx: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] add 6.0 Gbit phy definitions to the sas transport classJames Bottomley
I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] mptspi: Add transport class Domain ValidationJames Bottomley
This is the first half of a patch to add the generic domain validation to mptspi. It also creates a secondary "virtual" channel for raid component devices since these are now exported with no_uld_attach. What Eric and I would have really liked is to export all physical components on channel 0 and all raid components on channel 1. Unfortunately, this would result in device renumbering on platforms with mixed RAID/Physical devices which was considered unacceptable for userland stability reasons. Still to be done is to plug back the extra parameter setting and DV pieces on reset and hotplug. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Change version number to 8.1.2Jamie Wellnitz
Change version number to 8.1.2 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Modify RSCN handling to unregister rpis on lost ↵Jamie Wellnitz
FCP_TARGETs immediately Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fix panic caused by HBA resets and target side cable pullsJamie Wellnitz
Fix panic caused by HBA resets and target side cable pulls Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed module parameter descriptions.Jamie Wellnitz
Fixed module parameter descriptions. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code cleanup of lpfc_mbx_cmpl_config_linkJamie Wellnitz
Code cleanup of lpfc_mbx_cmpl_config_link Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Allow turning on internal loop-back modeJamie Wellnitz
Allow turning on internal loop-back mode Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code style changes for Discovery codeJamie Wellnitz
Code style changes for Discovery code Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc staticJamie Wellnitz
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Added support for FANJamie Wellnitz
Added support for FAN Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hbaJamie Wellnitz
Remove hba_list from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Correct use of the hostdata field in scsi_hostJamie Wellnitz
Correct use of the hostdata field in scsi_host Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Misc FC Discovery changes :Jamie Wellnitz
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding ↵Jamie Wellnitz
commands per lpfc HBA Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a double insertion of mail box object to the SLI ↵Jamie Wellnitz
mailbox list. Fixed a double insertion of mail box object to the SLI mailbox list. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed system panic in lpfc_sli_brdreset during dynamic ↵Jamie Wellnitz
add of LP11K Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Explicitly initialize the skip_post argument to ↵Jamie Wellnitz
lpfc_sli_send_reset Explicitly initialize the skip_post argument to lpfc_sli_send_reset on a ERATT interrupt. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a race condition in the PLOGI retry logic.Jamie Wellnitz
Fixed a race condition in the PLOGI retry logic. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Handling of ELS commands RRQ, RPS, RPL and LIRR correctlyJamie Wellnitz
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused SLI_IOCB_HIGH_PRIORITYJamie Wellnitz
Remove unused SLI_IOCB_HIGH_PRIORITY Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unreferenced cfg_fcp_bind_method from struct lpfc_hbaJamie Wellnitz
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused prototypes from lpfc_crtn.hJamie Wellnitz
Remove unused prototypes from lpfc_crtn.h Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] scsi: Handle device_add failure in scsi_alloc_targetBrian King
Fixes scsi to handle device_add failure in scsi_alloc_target. Without this patch, if this call were to fail, we can oops when we free the target. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fix scsi process problems and clean up the target reap issuesJames Bottomley
In order to use the new execute_in_process_context() API, you have to provide it with the work storage, which I do in SCSI in scsi_device and scsi_target, but which also means that we can no longer queue up the target reaps, so instead I moved the target to a state model which allows target_alloc to detect if we've received a dying target and wait for it to be gone. Hopefully, this should also solve the target namespace race. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] add execute_in_process_context() APIJames Bottomley
We have several points in the SCSI stack (primarily for our device functions) where we need to guarantee process context, but (given the place where the last reference was released) we cannot guarantee this. This API gets around the issue by executing the function directly if the caller has process context, but scheduling a workqueue to execute in process context if the caller doesn't have it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] don't call ips_eh_reset in ips_queue to avoid deadlockMike Christie
When the locking was changed in the eh code ips_eh_reset was changed so that it was a wraper around __ips_eh_reset and all ips_eh_reset does is grab the host lock and then calls __ips_eh_reset. In the queuecommand, ips_queue is called with the host_lock held so if it calls ips_eh_reset we will have a problem. This patch just has ips_queue call __ips_eh_reset. Patch is only compile tested. I do not have the HW. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Hammer, Jack <Jack_Hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] scsi_lib: fix recognition of cache type of Initio SBP-2 bridgesAl Viro
Regardless what mode page was asked for, Initio INIC-14x0 and INIC-2430 always return page 6 without mode page headers. Try to recognise this as a special case in scsi_mode_sense and setting the mode sense headers accordingly. Signed-off-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Improve message printing codeMatthew Wilcox
Fix a bug where we would consume one byte too many in the message printing code. Add support for 256-byte long messages. Add support for the Modify Bidirectional Data Pointer message. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Recognize missing LUNs for non-standard devicesAlan Stern
Some non-standard SCSI targets or protocols, such as USB UFI, report "no LUN present" by setting the Peripheral Device Type to 0x1f and the Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY response. This patch (as650b) adds a new target flag and code to accomodate such targets. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] aic7xxx: semaphore to completion conversionChristoph Hellwig
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote: > switch eh_sem to a completion. due to wait_for_completion_timeout this > also nicely simplifies the code. Unfortunately it's untested, so if > someone with the hardware could give it a try that would be nice. Once > it works the same thing can be applied to aic79xx. New version that switches to the common onstack completion and just a pointer in the platform_data struct idiom. This gets rid of all the flags fiddling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] aacraid: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Add EXPORT_SYMBOL for spi msg functionsJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] sas: add support for enclosure and bad ID rphy attributesChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] mptsas: add support for enclosure and bay identifier attributesChristoph Hellwig
Adds support to retrieve the enclosure and bay identifiers. This patch is from Eric with minor modifications from me, rewritten from a buggy patch of mine, based on the earlier CSMI implementation from Eric.. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] jazz_esp: Fix sparse warnings.Ralf Baechle
Using plain integer as NULL pointer. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] jazz_esp: Delete useless prototypeRalf Baechle
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Make spi_print_msg more consistentMatthew Wilcox
Almost all the output from spi_print_msg() has a trailing space. This patch fixes up the three cases that don't. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Add spi_populate_*_msg functionsMatthew Wilcox
Introduce new helpers: - spi_populate_width_msg() - spi_populate_sync_msg() - spi_populate_ppr_msg() and use them in drivers which already enable the SPI transport. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] ncr53c8xx updateMatthew Wilcox
Delete unused NAME53C definition Remove use of the M_* constants; use the common SCSI constants instead Translate some remaining German Add a missing changelog entry Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] unused show_spi_transport_period_helper parameterMatthew Wilcox
show_spi_transport_period_helper() doesn't need the class_device parameter Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fix uninitialized variable errorMatthew Wilcox
in __scsi_add_device, sdev may be uninitialised if scsi_host_scan_allowed() returns false. Fix by initialising at the top of the routine. Also rely on the fact that scsi_probe_and_add_lun() only actually fills in the sdev pointer if the SCSI_SCAN_LUN_PRESENT case (so no need to check the return value). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] cciss: kfree(NULL) is legalAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] drivers/message/fusion/mptfc.c: make 2 functions staticAdrian Bunk
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] PCI Error Recovery: IPR SCSI device driverLinas Vepstas
Various PCI bus errors can be signaled by newer PCI controllers. This patch adds the PCI error recovery callbacks to the IPR SCSI device driver. The patch has been tested, and appears to work well. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fusion - mptlan - remove wierd humor printMoore, Eric
Removes wierd humor, and bad language printk in mptlan. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 08:34:06 +0000