aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-19PCI quirk: don't mark one netmos as class otherJiri Slaby
Let it stay as serial, since it doesn't have subdevice in the form of 0x00PS. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: enhance physical slot debug informationAlex Chiang
Convert usages of pr_debug to dev_dbg and add physical slot name. Note that we use dev_dbg on the struct pci_bus and still manually print out the PCI slot number (instead of calling dev_dbg on a pci_dev) because a struct pci_bus with empty physical slots will not have any pci_devs. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: pciehp: make cmd_busy flag one bitKenji Kaneshige
The cmd_busy field in struct controller takes only two values 0 or 1. So it should be one bit. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: pciehp: enable software notification on empty slotsKenji Kaneshige
Current pciehp disables software notification of adapter presence changed event and MRL changed event when slot is turned off. Because of this, there is no way to detect those events on empty slots in the current pciehp implementation. According to the past discussion(*), this behavior was introduced to prevent endless loop that could happen if pcie_isr() runs after power fault is detected on a certain platform whose stickey power-fault bit remains on till the slot is powered on again. (*) http://sourceforge.net/mailarchive/message.php?msg_id=20051130135409.A14918%40unix-os.sc.intel.com I think this endless loop can be avoided using one bit flag that indicates power fault had been detected, instead of disabling software notification of adapter present changed event and MRL changed event. With this patch, we can enable software notification mechanism of presence changed and MRL changed event on the empty slots again. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: pciehp: fix possible endless loop in pcie_isrKenji Kaneshige
Fix possible endless loop in pcie_isr. Currently, pcie_isr() (interrupt service routine of pciehp) can end up in an endless loop if the Slot Status register is set again immediately after being cleared. According to the past discussion (see below URL) this case can happen if the power fault detected bit is set during handling. http://sourceforge.net/mailarchive/message.php?msg_id=20051130135409.A14918%40unix-os.sc.intel.com Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. Since the subsequent code that could provoke an error does not use the allocated data, the allocation is just moved below it. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: add missing KERN_* constants to printksFrank Seidel
According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing pieces here for the pci subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: check if a bus is added when removing itYu Zhao
When removing a bus, 'is_added' should be checked to make sure the bus has been successfully added by pci_bus_add_child() who will sets 'is_added'. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/MSI: Use #ifdefs instead of weak functionsMichael Ellerman
Weak functions aren't all they're cracked up to be. They lead to incorrect binaries with some toolchains, they require us to have empty functions we otherwise wouldn't, and the unused code is not elided (as of gcc 4.3.2 anyway). So replace the weak MSI arch hooks with the #define foo foo idiom. We no longer need empty versions of arch_setup/teardown_msi_irq(). This is less source (by 1 line!), and results in smaller binaries too: text data bss dec hex filename 9354300 1693916 678424 11726640 b2ef30 build/powerpc/vmlinux-before 9354052 1693852 678424 11726328 b2edf8 build/powerpc/vmlinux-after Also smaller on x86_64 and arm (iop13xx). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/PCIe portdrv: Fix allocation of interruptsRafael J. Wysocki
If MSI-X interrupt mode is used by the PCI Express port driver, too many vectors are allocated and it is not ensured that the right vectors will be used for the right services. Namely, the PCI Express specification states that both PCI Express native PME and PCI Express hotplug will always use the same MSI or MSI-X message for signalling interrupts, which implies that the same vector will be used by both of them. Also, the VC service does not use interrupts at all. Moreover, is not clear which of the vectors allocated by pci_enable_msix() in the current code will be used for PME and hotplug and which of them will be used for AER if all of these services are configured. For these reasons, rework the allocation of interrupts for PCI Express ports so that if MSI-X are enabled, the right vectors will be used for the right purposes. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/MSI: Introduce pci_msix_table_size()Rafael J. Wysocki
Introduce new function pci_msix_table_size() returning the size of the MSI-X table of given PCI device or 0 if the device doesn't support MSI-X. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
More dev_set_name conversion. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Remove struct pcie_port_service_idRafael J. Wysocki
The PCI Express port driver uses 'struct pcie_port_service_id' for matching port service devices and drivers, but this structure contains fields that duplicate information from the port device itself (vendor, device, subvendor, subdevice) and fields that are not used by any existing port service driver (class, class_mask, drvier_data). Also, both existing port service drivers (AER and PCIe HP) don't even use the vendor and device fields for device matching. Therefore 'struct pcie_port_service_id' can be removed altogether and the only useful members of it (port_type, service) can be introduced directly into the port service device and port service driver structures. That simplifies the code quite a bit and reduces its size. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Simplily probe callback of service driversRafael J. Wysocki
The second argument of the ->probe() callback in struct pcie_port_service_driver is unnecessary and never used. Remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Remove unnecessary functionRafael J. Wysocki
The function pcie_portdrv_save_config() in portdrv_pci.c is not necessary. Remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Do not enable port device before setting up interruptsRafael J. Wysocki
The PCI Express port driver calls pci_enable_device() before setting up interrupts, which is wrong, because if there is an interrupt pin configured for the port, pci_enable_device() will likely set up an interrupt link for it. However, this shouldn't be done if either MSI or MSI-X interrupt mode is chosen for the port. The solution is to call pci_enable_device() after setting up interrupts, because in that case the interrupt link won't be set up if MSI or MSI-X are enabled. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Aviod using service devices with wrong interruptsRafael J. Wysocki
The PCI Express port driver should not attempt to register service devices that require the ability to generate interrupts if generating interrupts is not possible. Namely, if the port has no interrupt pin configured and we cannot set up MSI or MSI-X for it, there is no way it can generate interrupts and in such a case the port services that rely on interrupts (PME, PCIe HP, AER) should not be enabled for it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: PCIe portdrv: Use driver data to simplify codeRafael J. Wysocki
PCI Express port driver extension, as defined by struct pcie_port_device_ext in portdrv.h, is allocated and initialized, but never used (it also is never freed). Extend it to hold the PCI Express port type as well as the port interrupt mode, change its name and use it to simplify the code in portdrv_core.c . Additionally, remove the redundant interrupt_mode member of struct pcie_device defined in include/linux/pcieport_if.h . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI: __FUNCTION__ is gcc-specific, use __func__Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/x86: document pci=earlydump argumentBjorn Helgaas
Document the "pci=earlydump" argument. This currently only works on x86. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/x86: format early dump like other PCI outputBjorn Helgaas
Use %02x:%02x.%d rather than %02x:%02x:%02x so PCI addresses look the same as in other parts of the kernel. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/x86: make early dump handle multi-function devicesBjorn Helgaas
The early "dump PCI config space" code skips many multi-function devices. This patch fixes that, so it dumps all devices in PCI domain 0. We should not skip the rest of the functions if CLASS_REVISION is 0xffffffff. Often multi-function devices have gaps in the function ID space, e.g., 1c.0 and 1c.2 exist but 1c.1 doesn't. The CLASS_REVISION of the non-existent 1c.1 function will appear to be 0xffffffff. We should only look at the HEADER_TYPE of function zero. Often the "multi-function" is set in function zero, but not in other functions. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/
2009-03-18Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: nfsd: nfsd should drop CAP_MKNOD for non-root NFSD: provide encode routine for OP_OPENATTR
2009-03-18Staging: benet: remove driver now that it is merged in drivers/net/Greg Kroah-Hartman
The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: Sathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-18Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix refptr allocation and release order
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: storage: Unusual USB device Prolific 2507 variation added USB: Add device id for Option GTM380 to option driver USB: Add Vendor/Product ID for new CDMA U727 to option driver USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 USB: EHCI: expedite unlinks when the root hub is suspended USB: EHCI: Fix isochronous URB leak USB: option.c: add ZTE 622 modem device USB: wusbcore/wa-xfer, fix lock imbalance USB: misc/vstusb, fix lock imbalance USB: misc/adutux, fix lock imbalance USB: image/mdc800, fix lock imbalance USB: atm/cxacru, fix lock imbalance USB: unusual_devs: Add support for GI 0431 SD-Card interface USB: serial: new cp2101 device id USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 USB: serial: add FTDI USB/Serial converter devices USB: usbfs: keep async URBs until the device file is closed USB: usbtmc: add protocol 1 support USB: usbtmc: fix stupid bug in open()
2009-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix vunmap and free order in snd_free_sgbuf_pages() ALSA: mixart, fix lock imbalance ALSA: pcm_oss, fix locking typo ALSA: oss-mixer - Fixes recording gain control ALSA: hda - Workaround for buggy DMA position on ATI controllers ALSA: hda - Fix DMA mask for ATI controllers ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2
2009-03-18Merge branch 'fix/opl3sa2-suspend' into for-linusTakashi Iwai
2009-03-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-03-18ALSA: Fix vunmap and free order in snd_free_sgbuf_pages()Takashi Iwai
In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: mixart, fix lock imbalanceJiri Slaby
There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: pcm_oss, fix locking typoJiri Slaby
s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: oss-mixer - Fixes recording gain controlViral Mehta
At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not set for MIC (slot 7). So, the same should not be checked when an application tries to do gain control for audio recording devices. Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently. Verified with a simple application which opens /dev/dsp for recording and /dev/mixer for volume control. Have tested two usb audio mic devices. Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Workaround for buggy DMA position on ATI controllersTakashi Iwai
The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Fix DMA mask for ATI controllersTakashi Iwai
ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bb_prealloc_list corruption due to wrong group locking ext4: fix bogus BUG_ONs in in mballoc code ext4: Print the find_group_flex() warning only once ext4: fix header check in ext4_ext_search_right() for deep extent trees.
2009-03-18powerpc/ps3: ps3_defconfig updatesGeoff Levand
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-18Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-03-18module: fix refptr allocation and release orderMasami Hiramatsu
Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927 Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-17USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik
The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add device id for Option GTM380 to option driverAchilleas Kotsis
Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel
* newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff
Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2009-03-17USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams
The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern
This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: Fix isochronous URB leakKarsten Wiese
ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: option.c: add ZTE 622 modem deviceAlbert Pauw
Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: wusbcore/wa-xfer, fix lock imbalanceJiri Slaby
Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 09:49:43 +0000