aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-07-13[POWERPC] Make the hvc_console output buffer size settableStephen Rothwell
So the iSeries console will be faster since it can send up to 200 bytes at a time to the Hypervisor. This only affects the tty part of the console, the console writes are still in 16 byte lots. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-13[POWERPC] iseries: A new iSeries consoleStephen Rothwell
This driver uses the hvc_console.c infrastructure that is used by the pSeries virtual and RTAS consoles. This will allow us to make viocons.c obsolete and is another step along the way to a combined kernel (as viocons could not coexist with CONFIG_VT). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-07[POWERPC] Remove linux,pci-domain propertiesJeremy Kerr
The linux,pci-domain property is no longer used by DLPAR/PCI Hotplug utilites, or LSVPD. This change removes it. Built for ppc64_defconfig. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Use const qualifiers for prom parsing utilitesJeremy Kerr
The of_bus callbacks map and get_flags can be constified, as they don't alter the range or addr arguments. of_dump_addr and of_read_addr can also be constified. Built for 32- and 64-bit powerpc Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Remove linux,device propertiesJeremy Kerr
The linux,device property isn't used anywhere within the kernel, and since it's a kernel pointer, it's a little useless for userspace. This change removes the code to create this property in of_device_register. Built for pmac32. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Add cpufreq support for Xserve G5Benjamin Herrenschmidt
The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Xserve G5 thermal control fixesBenjamin Herrenschmidt
The thermal control for the Xserve G5s had a few issues. For one, the way to program the RPM fans speeds into the FCU is different between it and the desktop models, which I didn't figure out until recently, and it was missing a control loop for the slots fan, running it too fast. Both of those problems were causing the machine to be much more noisy than necessary. This patch also changes the fixed value of the slots fan for desktop G5s to 40% instead of 50%. It seems to still have a pretty good airflow that way and is much less noisy. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Fix mem= handling when the memory limit is > RMO sizeMichael Ellerman
There's a bug in my cleaned up mem= handling, if the memory limit is larger than the RMO size we'll erroneously enlarge the RMO size. Fix is to only change the RMO size if the memory limit is less than the current RMO value. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] More offb/bootx fixesBenjamin Herrenschmidt
There were still some issues with offb when BootX doesn't provide a proper display node, this fixes them. This also re-instates the palette hacks that were disabled a couple of kernel versions ago when I converted to the new OF parsing, and shuffles some functions around to avoid prototypes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Add support for briq front panelBenjamin Herrenschmidt
This adds the driver for the Briq front panel. This is a cleaned up version of a driver that has been floating around for some time now, initially written by Karsten Jeppesen <karsten@jeppesens.com> and cleaned up by jk and myself. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Add briq support to CHRPBenjamin Herrenschmidt
The support for Briq machines has been floating around as patches for ages. This cleans it up and adds it once for all. Some of this is based on initial code provided by Karsten Jeppesen <karsten@jeppesens.com> and mostly rewritten from scratch by me. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Fix legacy_serial.c error handling on 32 bitsBenjamin Herrenschmidt
The code in legacy_serial.c wouldn't properly compare OF translation results against OF_BAD_ADDR as it's using a phys_addr_t which is 32 bits on some 32-bit powerpc platforms. This fixes it by always using a u64 which is what is returned by the OF parsing routines. It also makes translation failure harmless for ISA serial ports. If they can't translate, we can't use the UART early, but we can still let the 8250 driver use it later on by using IO port accessors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Fix default clock for udbg_16550Benjamin Herrenschmidt
This patch makes it possible to provide 0 as the clock value for udbg_16550, making it default to the standard 1.8432Mhz clock Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP setBenjamin Herrenschmidt
Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Fix 32 bits warning in prom_init.cBenjamin Herrenschmidt
A warning is hurting my eyes when building 32 bits kernels Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Workaround Pegasos incorrect ISA "ranges"Benjamin Herrenschmidt
The Pegasos firmware doesn't create a valid "ranges" property for the ISA bridge, thus causing translation of ISA addresses and IO ports to fail. This fixes it, thus re-enabling proper early serial console to work on Pegasos. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] fix up front-LED KconfigJohannes Berg
Rather long patch, apparently no one has updated the pmac32_defconfig in a while. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Add -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile.Niels Kristian Bech Jensen
I got some undefined references to __stack_chk_fail in arch/powerpc/boot/stdio.o and arch/powerpc/boot/prom.o when I was trying to build a kernel on Ubuntu Edgy Eft - which includes Stack Smashing Protection. This patch adds -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile (why does BOOTCFLAGS depend on HOSTCFLAGS and not CFLAGS?). Regards, Niels Kristian Bech Jensen Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-05Linux 2.6.18-rc1Linus Torvalds
It's all good.
2006-07-05Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PKT_SCHED]: Fix error handling while dumping actions [PKT_SCHED]: Return ENOENT if action module is unavailable [PKT_SCHED]: Fix illegal memory dereferences when dumping actions
2006-07-05Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix stack overflow checking in modular non-SMP kernels. [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.
2006-07-05[PKT_SCHED]: Fix error handling while dumping actionsThomas Graf
"return -err" and blindly inheriting the error code in the netlink failure exception handler causes errors codes to be returned as positive value therefore making them being ignored by the caller. May lead to sending out incomplete netlink messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05[PKT_SCHED]: Return ENOENT if action module is unavailableThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05[PKT_SCHED]: Fix illegal memory dereferences when dumping actionsThomas Graf
The TCA_ACT_KIND attribute is used without checking its availability when dumping actions therefore leading to a value of 0x4 being dereferenced. The use of strcmp() in tc_lookup_action_n() isn't safe when fed with string from an attribute without enforcing proper NUL termination. Both bugs can be triggered with malformed netlink message and don't require any privileges. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05[SPARC64]: Fix stack overflow checking in modular non-SMP kernels.Mikael Pettersson
The sparc64 kernel's EXPORT_SYMBOL(_mcount) is inside an #ifdef CONFIG_SMP. This breaks modules in non-SMP kernels built with stack overflow checking (CONFIG_STACK_DEBUG=y), as modules_install reports: WARNING: /lib/modules/2.6.17/kernel/drivers/ide/ide-cd.ko needs unknown symbol _mcount Trivially fixed by moving EXPORT_SYMBOL(_mcount) outside of the #ifdef CONFIG_SMP. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PCI] Add JMicron PCI ID constants [PATCH] ahci: Ensure that we don't grab both functions [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2 [PATCH] sata_sil24: add suspend/sleep support [PATCH] sata_sil24: separate out sil24_init_controller() [PATCH] sata_sil: add suspend/sleep support [PATCH] sata_sil: separate out sil_init_controller() [PATCH] libata: reimplement controller-wide PM [PATCH] libata: reimplement per-dev PM [PATCH] libata: implement PM EH actions [PATCH] libata: separate out __ata_ehi_hotplugged() [PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIET [PATCH] libata: clean up debounce parameters and improve parameter selection [PATCH] libata: implement ATA_EHI_RESUME_LINK [PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error() [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy() [PATCH] libata: add ap->pflags and move core dynamic flags to it [PATCH] libata: Conditionally set host->max_cmd_len [PATCH] sata_vsc: data_xfer should use mmio
2006-07-05[SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.Randy Dunlap
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05[PCI] Add JMicron PCI ID constantsJeff Garzik
They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] ahci: Ensure that we don't grab both functionsroot
When we force the chip into dual fn mode so we get PATA and AHCI we must be sure we don't then do anything dumb like try and grab both with the AHCI driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata-core.c: restore configuration boot messages in ↵Borislav Petkov
ata_dev_configure(), v2 This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: <petkov@math.uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil24: add suspend/sleep supportTejun Heo
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil24: separate out sil24_init_controller()Tejun Heo
Separate out controller initialization from sil24_init_one() into sil24_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil: add suspend/sleep supportTejun Heo
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil: separate out sil_init_controller()Tejun Heo
Separate out controller initialization from sil_init_one() into sil_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: reimplement controller-wide PMTejun Heo
Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: reimplement per-dev PMTejun Heo
Reimplement per-dev PM. The original implementation directly put the device into suspended mode and didn't synchronize w/ EH operations including hotplug. This patch reimplements ata_scsi_device_suspend() and ata_scsi_device_resume() such that they request EH to perform the respective operations. Both functions synchronize with hotplug such that it doesn't operate on detached devices. Suspend waits for completion but resume just issues request and returns. This allows parallel wake up of devices and thus speeds up system resume. Due to sdev detach synchronization, it's not feasible to separate out EH requesting from sdev handling; thus, ata_device_suspend/resume() are removed and everything is implemented in the respective libata-scsi functions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement PM EH actionsTejun Heo
Implement two PM per-dev EH actions - ATA_EH_SUSPEND and ATA_EH_RESUME. Each action puts the target device into suspended mode and resumes from it respectively. Once a device is put to suspended mode, no EH operations other than RESUME is allowed on the device. The device will stay suspended till it gets resumed and thus reset and revalidated. To implement this, a new device state helper - ata_dev_ready() - is implemented and used in EH action implementations to make them operate only on attached & running devices. If all possible devices on a port are suspended, reset is skipped too. This prevents spurious events including hotplug events from disrupting suspended devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: separate out __ata_ehi_hotplugged()Tejun Heo
Separate out __ata_ehi_hotplugged() from ata_ehi_hotplugged(). The underscored version doesn't set AC_ERR_ATA_BUS. This will be used for resume which is a hotplug event but not an ATA bus error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIETTejun Heo
Implement ATA_EHI_NO_AUTOPSY and QUIET. These used to be implied by ATA_PFLAG_LOADING, but new power management and PMP support need to use these separately. e.g. Suspend/resume operations shouldn't print full EH messages and resume shouldn't be recorded as an error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: clean up debounce parameters and improve parameter selectionTejun Heo
The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement ATA_EHI_RESUME_LINKTejun Heo
Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to be resumed. This used to be implied by ATA_EHI_HOTPLUGGED. However, hotplug isn't the only event which requires link resume and separating this out allows other places to request link resume. This differentiation also allows better debounce timing selection. This patch converts user scan to use ATA_EHI_RESUME_LINK. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error()Tejun Heo
ap_lock was used because &ap->host_set->lock was too long and used a lot. Now that &ap->host_set->lock is replaced with ap->lock, there's no reason to keep ap_lock. [ed. note: that's not entirely true. ap_lock is a local variable, caching the results of a de-ref. In theory, if the compiler is smart enough, this patch is cosmetic. However, since this is not a fast path (it is the error path), this patch is nonetheless acceptable, even though it _may_ introduce a performance regression.] Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()Tejun Heo
ata_eh_autopsy() used to directly assign determined action mask to ehc->i.action thus overriding actions set by some of nested analyze functions. This patch makes ata_eh_autopsy() add action masks just as it's done in other places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: add ap->pflags and move core dynamic flags to itTejun Heo
ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: Conditionally set host->max_cmd_lenBrian King
In preparation for SAS attached SATA devices, which will not have a libata scsi_host, only setup host->max_cmd_len if ap->host exists. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_vsc: data_xfer should use mmioMartin Hicks
Hi, sata_vsc is an MMIO device, and should use the correct data_xfer function. This problem was introduced by: commit a6b2c5d4754dc539a560fdf0d3fb78a14174394a Author: Alan Cox <alan@lxorguk.ukuu.org.uk> Date: Mon May 22 16:59:59 2006 +0100 [PATCH] PATCH: libata. Add ->data_xfer method Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NLM,NFSv4: Wait on local locks before we put RPC calls on the wire VFS: Add support for the FL_ACCESS flag to flock_lock_file() NFSv4: Ensure nfs4_lock_expired() caches delegated locks NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock VFS: Allow caller to determine if BSD or posix locks were actually freed NFS: Optimise away an excessive GETATTR call when a file is symlinked This fixes a panic doing the first READDIR or READDIRPLUS call when: NFS: Fix NFS page_state usage Revert "Merge branch 'odirect'"
2006-07-05Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3711/1: AT91 timer update [ARM] 3709/1: pnx4008: convert to generic irq subsystem [ARM] 3710/1: AT91 Serial: Use GPIO API
2006-07-05Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits) [PATCH] myri10ge - Export more parameters to ethtool [PATCH] myri10ge - Use dev_info() when printing parameters after probe [PATCH] myri10ge - Drop ununsed nvidia chipset id [PATCH] myri10ge - Drop unused pm_state [PATCH] Fix freeing of net device [PATCH] remove dead entry in net wan Kconfig [PATCH] NI5010 netcard cleanup [PATCH] lock validator: fix ns83820.c irq-flags bug [PATCH] pcnet32: Cleanup rx buffers after loopback test. [PATCH] pcnet32: Suspend the chip rather than restart when changing multicast/promisc [PATCH] pcnet32: Handle memory allocation failures cleanly when resizing tx/rx rings [PATCH] pcnet32: Use kcalloc instead of kmalloc and memset [PATCH] pcnet32: Fix off-by-one in get_ringparam [PATCH] pcnet32: Use PCI_DEVICE macro [PATCH] pcnet32: Fix Section mismatch error [PATCH] Add support for the Cicada 8201 PHY [PATCH] zd1211rw: disable TX queue during stop [PATCH] ZyDAS ZD1211 USB-WLAN driver [PATCH] softmac: fix build-break from 881ee6999d66c8fc903b429b73bbe6045b38c549 [PATCH] CONFIG_WIRELESS_EXT is neccessary after all ...
2006-07-05[PATCH] myri10ge - Export more parameters to ethtoolBrice Goglin
Add the IRQ line, the tx_boundary, and whether Write-combining and MSI are enabled to the list of parameters that are exported to ethtool. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>