aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-28[IPV6] ADDRCONF: Sparse: Make inet6_dump_addr() code paths more ↵YOSHIFUJI Hideaki
straight-forward. Fix the following sparse warning: | net/ipv6/addrconf.c:3384:2: warning: context imbalance in 'inet6_dump_addr' - different lock contexts for basic block Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPV6]: Sparse: Declare non-static ipv6_{route,icmp,frag}_sysctl_init() in ↵YOSHIFUJI Hideaki
header. Fix the following sparse warnings: | net/ipv6/route.c:2491:18: warning: symbol 'ipv6_route_sysctl_init' was not declared. Should it be static? | net/ipv6/icmp.c:922:18: warning: symbol 'ipv6_icmp_sysctl_init' was not declared. Should it be static? | net/ipv6/reassembly.c:628:6: warning: symbol 'ipv6_frag_sysctl_init' was not declared. Should it be static? Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPV6] ADDRLABEL: Sparse: Make several functions static.YOSHIFUJI Hideaki
Fix following sparse warnings: | net/ipv6/addrlabel.c:172:25: warning: symbol 'ip6addrlbl_alloc' was not declared. Should it be static? | net/ipv6/addrlabel.c:219:5: warning: symbol '__ip6addrlbl_add' was not declared. Should it be static? | net/ipv6/addrlabel.c:260:5: warning: symbol 'ip6addrlbl_add' was not declared. Should it be static? | net/ipv6/addrlabel.c:285:5: warning: symbol '__ip6addrlbl_del' was not declared. Should it be static? | net/ipv6/addrlabel.c:311:5: warning: symbol 'ip6addrlbl_del' was not declared. Should it be static? Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPV6] UDPLITE: Sparse: Declare non-static symbols in header.YOSHIFUJI Hideaki
Fix the following sparse warnings: | net/ipv6/udplite.c:45:14: warning: symbol 'udplitev6_prot' was not declared. Should it be static? | net/ipv6/udplite.c:80:12: warning: symbol 'udplitev6_init' was not declared. Should it be static? | net/ipv6/udplite.c:99:6: warning: symbol 'udplitev6_exit' was not declared. Should it be static? Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPV6] UDP,UDPLITE: Sparse: {__udp6_lib,udp,udplite}_err() are of void.YOSHIFUJI Hideaki
Fix following sparse warnings: | net/ipv6/udp.c:262:2: warning: returning void-valued expression | net/ipv6/udplite.c:29:2: warning: returning void-valued expression Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPV4] UDP,UDPLITE: Sparse: {__udp4_lib,udp,udplite}_err() are of void.YOSHIFUJI Hideaki
Fix following sparse warnings: | net/ipv4/udp.c:421:2: warning: returning void-valued expression | net/ipv4/udplite.c:38:2: warning: returning void-valued expression Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[BNX2]: Fix driver phy_flags name space.Michael Chan
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Pass correct namespace in ip_rt_get_source.Denis V. Lunev
ip_rt_get_source is the infamous place for which dst_ifdown kludges have been implemented. This means that rt->u.dst.dev can be safely dereferrenced obtain nd_net. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Pass correct namespace in ip_route_input_slow.Denis V. Lunev
The packet on the input path always has a referrence to an input network device it is passed from. Extract network namespace from it. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Pass correct namespace in context fib_check_nh.Denis V. Lunev
Correct network namespace is already used in fib_check_nh. Re-work its usage for better readability and pass into fib_lookup & inetdev_by_index. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Pass correct namespace in fib_validate_source.Denis V. Lunev
Correct network namespace is available inside fib_validate_source. It can be obtained from the device passed in. The device is not NULL as in_device is obtained from it just above. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inetdev_by_index.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to fib_lookup.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: ipmr sparse warningsStephen Hemminger
Get rid of some of the sparse warnings. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: igmp sparse warningsStephen Hemminger
Partial sparse warning fix. The other conditional locking is too much for sparse to handle. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: sparse warning fixStephen Hemminger
Minor sparse warning fix. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix driver software flag namespace.David S. Miller
Prefix "bnx2->flags" names with BNX2_* for consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2] Update version to 1.7.2.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add link-down workaround on 5706 serdes.Michael Chan
In some blade systems using the 5706 serdes, the hardware sometimes does not properly generate link down interrupts. We add a workaround in the driver's timer to force a link-down when some PHY registers report loss of SYNC. The parallel detect logic is cleaned up slightly to better integrate the workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix minor bug in bnx2_has_work().Michael Chan
It is more correct to get the status block from the bnx2_napi struct instead of the bnx2 struct. It happens that they are the same in this case because we are using the first MSIX vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Disable jumbo rx paging on 5709 Ax.Michael Chan
The chip has problem running in this mode and needs to be disabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28b43/nphy.c: include headers to avoid build breakage on some platformsJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/rt2x00/rt2x00usb.c: fix uninitialized var warningAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/iwlwifi/iwl-3945.c: fix printk warningAndrew Morton
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap': drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: fix use-after-free rfkill bugStefano Brivio
Fix rfkill code which caused a use-after-free bug. Thanks to David Woodhouse for spotting this out. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: A-MPDU Rx remove stop_rx_ba_session warning printRon Rindjunsky
This patch removes a warning print from ieee80211_sta_stop_rx_ba_session in case the tid is inactive when interface goes down. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: A-MPDU Rx stop aggregation on proper devRon Rindjunsky
This patch adds a check to insure that Rx A-MPDU will be stopped only for the proper device. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: Initialize vif pointerIvo van Doorn
Before calling update_beacon() mac80211 must initialize the control.vif pointer so it can be used by the driver to determine which interface is trying to send the beacon. v2: ieee80211_beacon_get() should also initialize the vif pointer since it can be called by mac80211 internally before calling config_interface(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: pepper main with debug statementHolger Schurig
libertas: re-pepper debug statementThe recent fluff of updates didn't put proper lbs_deb_enter/leave calls into the source code. Add them where appropriate. Also contains some whitespace changes. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't blindly try meshHolger Schurig
The CF card only has a very old firmware (5.0.16p0). This firmware doesn't know anything about mesh config. However, current code blindly calls mesh_config when the card is inserted. So check the firmware version before issuing this command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: always show firmware releaseHolger Schurig
Always shows the firmware release. Also converts the firmware release into something that is easily comparable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move cardspecific data to driverHolger Schurig
boot2_version is purely USB specific, so move it to struct if_usb_card. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas cs/sdio: fix 'NOHZ: local_softirq_pending 08' messageHolger Schurig
netif_rx should be called only from interrupt context. if_cs and if_sdio receive packets from other contexts, and thus should call netif_rx_ni. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add lots of N-PHY lookup tablesMichael Buesch
This adds lots of N-PHY related lookup tables. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: style fixes to usage of << and >> operatorsReinette Chatre
The << and >> operators need space on each side. Cc: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove reference to non-existent documentationReinette Chatre
The external iwlwifi driver comes with a README file that is referenced by the Kconfig. This README is not present in the driver included in the kernel. Remove references to this documentation. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Update iwlwifi version stamp to 1.2.23Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: 3954 renames iwl3945_rate_scale_priv to iwl3945_rs_staTomas Winkler
This patch renames iwl3945_rate_scale_priv to iwl3945_rs_sta as it better represents the purpose of this variable. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28iwlwifi: 4965 unify rate scale variable names for station dataTomas Winkler
1, This patch renames iwl4965_rate_scale_priv to iwl4965_lq_sta. This type represents a station's link quality. 2. The names of the variables of this type were rs_priv, lq_data, lq, crl across the file. All are now unified under the name lq_sta. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: move uCode helper functions to iwl-helpers.hTomas Winkler
This patch adds iwl_free_fw_desc ucode helper function. It also moves ucode helper functions to iwl-helpers.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: fix problem when rf_killswitch change during suspend/resumeZhu Yi
After we delay device initialization until interface up, there are more conditions for the hardware rf_kill switch states during suspend and resume. For example, before suspend we can have interface up or down, rf_kill enable or disable; before resume we can have rf_kill enable or disable. So there are totally 2^3 = 8 conditions to handle. This patch addressed this problem and makes sure every condition works correctly. This patch also merges the device suspend and resume handlers with the mac_start and mac_stop code since they are basically doing the same thing. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28iwlwifi: delay firmware loading from pci_probe to network interface openZhu Yi
This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: document scan commandBen Cahill
Document scan command. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove iwl4965_tx_cmdTomas Winkler
This patch removes iwl4965_tx_cmd function and splits its content to iwl4965_hw_build_tx_cmd_rate, iwl4965_build_tx_cmd_basic, and iwl4965_tl_get_stats function. The latest one will be deprecated when traffic load will move to rate scale module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: move iwl4965_get_dma_hi_address function to iwl-helpers.hTomas Winkler
This patch moves iwl4965_get_dma_hi_address function to iwl-headers.h as iwl_get_dma_hi_address. This function will be used in more chipsets than only 4965. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwl4965: Remove redundant code in iwl4965_tx_cmdTomas Winkler
This function removes redundant code in iwl4965_tx_cmd function, leftovers of previous design. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add NPHY channel switch codeMichael Buesch
This adds code and table data for channel switching on NPHYs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add NPHY radio init codeMichael Buesch
This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Add boardflags_hi field to the sprom data structureMichael Buesch
Add boardflags-high. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add Broadcom 2055 radio register definitionsMichael Buesch
Add the register definitions for the Broadcom 2055 N-radio. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 14:34:19 +0000