aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-22sh: add isp1161 usb host device to se7343Magnus Damm
Add isp1161 platform data to get usb host working on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add st16c2550 devices to se7343Magnus Damm
Add 8250 platform data to setup the ST16C2550C chip on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix number of interrupts on se7343Magnus Damm
Fix to make sure that the on-board interrupt sources are included in the interrupt count on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh7343 scif configuration updateMagnus Damm
Fix interrupt values for the first sh7343 SCIF port and update the configuration to include the remaining 3 ones. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: propagate r_clkMagnus Damm
Make sure the 32 KHz r_clk rate gets propagated correctly. Without this fix the clocks for RTC, CMT, KEYSC and RWDT are stuck at 0 Hz. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add support for SH7201 CPU subtype.Peter Griffin
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Switch HD64461 from hw_interrupt_type to irq_chipMatt Fleming
Use struct irq_chip for the interrupt handler for the HD64461. Also convert some in{b,w} and out{b,w} calls to the equivalent __raw_* calls. Include <linux/io.h> and not <asm/io.h> to stop checkpatch.pl complaining. This change should now allow machines with HD64461 to define GENERIC_HARDIRQS_NO__DO_IRQ. Acked-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: pci-sh7780: fix pci memory address maskYoshihiro Shimoda
Fix the problem that cannot work a PCI device when system memory size is 256Mbyte in 29bit address mode. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide a dyn_arch_ftrace struct definition.Paul Mundt
Needed for dynamic ftrace API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Split out the idle loop for reuse between _32/_64 variants.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate cpu_relax()/cpu_sleep() definitions across _32/_64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: do not latency trace idle.Paul Mundt
Description snipped from Steven Rostedt's PPC patch: When idle is called, interrupts are blocked, but the idle function will still wake up on an interrupt. The problem is that the interrupt disabled latency tracer will take this call to idle as a latency. This patch disables the latency tracing when going into idle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Tidy up backtrace formatting with kallsyms disabled.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a simple code dumper for SUPERH32 show_regs().Paul Mundt
This implements a simple show_code() that is in turn plugged in to show_regs() to provide minimal code dumping at the end of the trace. Built on top of a simple instruction disassembler derived from the binutils opcode table. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a few more branch types to the branch emulator.Paul Mundt
This plugs in some extra encodings for matching more bsr/bsrf/jsr branches. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Re-add support for best fit ISA tuning if none is available.Paul Mundt
This was removed in the libgcc integration, but there are still some compilers that need this. We also relax the rules on the ISA tuning in the cases where there are no matches for the CPU tuning and adopt the -any default, which matches the intent of the isa-y target list. This compensates for mismatches where binutils supports a wide array of targets whilst the compiler is much more restricted. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: More movmem alias symbol exports for older compilers.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide optimized unaligned loads on SH-4A.Paul Mundt
This adds support for unaligned loads on SH-4A, using the SH-4A's neutered movua.l instruction. As movua.l is r0-inspired, stores are still handled through the packed struct. Based on asm-generic/unaligned.h by Harvey Harrison. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: P4 ioremap pass-throughMagnus Damm
This patch adds a pass-through case when ioremapping P4 addresses. Addresses passed to ioremap() should be physical addresses, so the best option is usually to convert the virtual address to a physical address before calling ioremap. This will give you a virtual address in P2 which matches the physical address and this works well for most internal hardware blocks on the SuperH architecture. However, some hardware blocks must be accessed through P4. Converting the P4 address to a physical and then back to a P2 does not work. One example of this is the sh7722 TMU block, it must be accessed through P4. Without this patch P4 addresses will be mapped using PTEs which requires the page allocator to be up and running. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add SH-4A optimized fastpath mutex implementation.Michael Trimarchi
Add fast mutex path implementation for the SH4A architecture Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh7760fb: Add support SH7720/SH7721 of RenesasNobuhiro Iwamatsu
SH7720 and 7721 has IP of Frame Buffer same as SH7760. This driver can support these. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh7760fb: Fix color pallette settingNobuhiro Iwamatsu
The setting of the color palette was wrong, fixed it. And removed fb_setcmap, and added fb_setcolreg function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add SH DMAC burst mode constantSteve Glendinning
The SH7709 datasheet defines bit 5 as set for burst mode, clear for cycle-steal mode. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix DMAOR register access on SH7709Steve Glendinning
sh7709 hardware manual says DMAOR is 16 bits long on this platform. Tested and working with a modified smsc911x ethernet driver (sh-dma support patch for this driver is coming soon). Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add platform-specific constants for SH7709Steve Glendinning
I'm using these constants in support of an in-house development board, and thought they may be useful to other users of SH7709. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide optimized non-atomic bitops for SH-2A.Paul Mundt
This ties in the new SH-2A 32-bit non-atomic bitops. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add -m4al tuning for SH4AL-DSP.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add exports for __udivsi3/__sdivsi3 and the _i4 versions.Paul Mundt
Needed by older compilers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert to generic bitops for IRQ-toggling implementation.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Specify sane default image targets for the SH-2 platforms.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.Paul Mundt
This moves in the necessary libgcc bits for SUPERH32 and drops the libgcc linking for the regular targets. This in turn allows us to rip out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: __udivdi3 -> do_div() in softfloat lib.Paul Mundt
Inhibit the generation of __udivdi3 for the softfloat lib, use do_div() outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Fix clock framework compiler warnings.Paul Mundt
CC arch/sh/kernel/cpu/clock.o arch/sh/kernel/cpu/clock.c: In function 'clk_disable': arch/sh/kernel/cpu/clock.c:156: warning: 'return' with a value, in function returning void Introduced by ("sh: enable and disable clocks recursively"). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22usb: Fix up sh_mobile usbf clock framework warnings.Paul Mundt
drivers/usb/gadget/m66592-udc.c: In function 'm66592_probe': drivers/usb/gadget/m66592-udc.c:1672: warning: label 'clean_up2' defined but not used drivers/usb/host/r8a66597-hcd.c: In function 'r8a66597_probe': drivers/usb/host/r8a66597-hcd.c:2401: warning: label 'clean_up2' defined but not used Added by commit 985fc7c81c7852f2e104c71cbe913ace683c9e6a ("sh: sh_mobile usbf clock framework support"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Codestyle cleanup patch.Michael Trimarchi
Trivial coding style cleanups. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22media: sh_mobile_ceu_camera: Add HAVE_CLK dependency.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: dynamic ftrace support.Matt Fleming
First cut at dynamic ftrace support. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove old sh_mobile mstpc clocksMagnus Damm
Remove the old sh_mobile mstpcr clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile lcdc clock framework supportMagnus Damm
Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile usb clock framework supportMagnus Damm
Add clock framework support to the usb/r8a66597 driver and adjust the cpu specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile usbf clock framework supportMagnus Damm
Add clock framework support to the usbf/m66592 driver and adjust the cpu specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile ceu clock framework supportMagnus Damm
Add clock framework support to the sh_mobile ceu and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile keysc clock framework supportMagnus Damm
Add clock framework support to the sh_mobile keysc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile i2c clock framework supportMagnus Damm
Add clock framework support to the sh_mobile i2c driver and adjust the processor specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7366Magnus Damm
Add sh7366 mstpcr bits and information about their parent clocks. The datasheet is pretty clear about the clocks on this device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7343Magnus Damm
Add sh7343 mstpcr bits and information about their parent clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7723Magnus Damm
Add sh7723 mstpcr bits and information about their parent clocks. The datasheet is pretty clear about the clocks on this device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7722Magnus Damm
Add sh7722 mstpcr bits and information about their parent clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: new sh_mobile mstpcr clocks base codeMagnus Damm
Add base code to handle new mstpcr clocks. Make sure clock rates propagate. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 08:48:05 +0000