aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-24ide: propagate AltStatus workarounds to ide_driveid_update()Bartlomiej Zolnierkiewicz
Propagate AltStatus workarounds from try_to_identify() to ide_driveid_update(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix kmalloc() failure handling in ide_driveid_update()Bartlomiej Zolnierkiewicz
* Doing kmalloc() in the middle of command execution is not only ugly but leaves drive waiting to send data on kmalloc() failure. Fix it. While at it: * Unify error code paths. * Fixup error message to be more useful and add missing KERN_ERR level. * Rename 'stat' variable to 's'. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24mn10300: remove <asm/ide.h>Bartlomiej Zolnierkiewicz
* Remove superfluous <asm/intctl-regs.h> include. * Remove no longer used SUPPORT_SLOW_DATA_PORTS define. * Move defining SUPPORT_VLB_SYNC to <linux/ide.h>. * Use __ide_mm_*() macros from <asm-generic/ide_iops.h> (MN10300 uses only memory-mapped I/O). * Remove <asm/ide.h>. While at it: * Remove superfluous SPARC64 #ifdef from <linux/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24frv: remove <asm/ide.h>Bartlomiej Zolnierkiewicz
* Remove superfluous <asm/{setup,io,irq}.h> includes. * Remove <asm/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove pciirq argument from ide_pci_setup_ports()Bartlomiej Zolnierkiewicz
* Set ->irq explicitly in cs5520.c. * Remove irq argument from ide_hw_configure(). * Remove pciirq argument from ide_pci_setup_ports(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix ->init_chipset method to return 'int' valueBartlomiej Zolnierkiewicz
* Return 0 instead of dev->irq in ->init_chipset implementations. * Fix ->init_chipset method to return 'int' value instead of 'unsigned int' one. This fixes ->init_chipset handling for host drivers (cs5530, hpt366 and pdc202xx_new) for which it is possible for this method to fail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove try_to_identify() wrapperBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove no longer needed IRQ auto-probing from try_to_identify() (v2)Bartlomiej Zolnierkiewicz
v2: Update actual_try_to_identify() documentation. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove no longer needed IRQ fallback code from hwif_init()Bartlomiej Zolnierkiewicz
Then remove no longer used __ide_default_irq(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24amd74xx: remove no longer needed ->init_hwif methodBartlomiej Zolnierkiewicz
This is now handled by core IDE PCI code. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove no longer needed IDE_HFLAG[_FORCE]_LEGACY_IRQSBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: use ide_pci_is_in_compatibility_mode() in ide_pci_init_{one,two}()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: use pci_get_legacy_ide_irq() in ide_pci_init_{one,two}()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: handle IDE_HFLAG[_FORCE]_LEGACY_IRQS in ide_pci_init_{one,two}()Bartlomiej Zolnierkiewicz
Move handling of IDE_HFLAG[_FORCE]_LEGACY_IRQS from ide_init_port() to ide_pci_init_{one,two}(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24trm290: small ->init_hwif cleanupBartlomiej Zolnierkiewicz
Core IDE PCI code takes care of assigning hwif->irq for both ports. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ns87415: small ->init_hwif cleanupBartlomiej Zolnierkiewicz
Core IDE PCI code takes care of assigning hwif->irq for both ports. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ns87415: use pci_get_legacy_ide_irq()Bartlomiej Zolnierkiewicz
Fix ->init_hwif to use pci_get_legacy_ide_irq() instead of __ide_default_irq(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24amd74xx: use ide_pci_is_in_compatibility_mode()Bartlomiej Zolnierkiewicz
Fix ->init_hwif to check if IDE PCI controller is in compatibility mode instead of checking for hwif->irq == 0. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24mn10300: add pci_get_legacy_ide_irq() to <asm/pci.h>Bartlomiej Zolnierkiewicz
Add missing pci_get_legacy_ide_irq() implementation before it becomes required by core IDE PCI code. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move error handling code to ide-eh.c (v2)Bartlomiej Zolnierkiewicz
Do some CodingStyle fixups in <linux/ide.h> while at it. v2: Add missing <linux/delay.h> include (reported by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: checkpatch.pl fixes for ide-iops.cBartlomiej Zolnierkiewicz
Fix following checkpatch.pl warnings/errors: - WARNING: space prohibited between function name and open parenthesis '(' - WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable - WARNING: line over 80 characters - ERROR: trailing whitespace - ERROR: space required before the open parenthesis '(' Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix comments in ide_config_drive_speed()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix printk() levels in [atapi_]reset_pollfunc()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move standard I/O code to ide-io-std.cBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_read_bcount_and_ireason() to ide-atapi.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move xfer mode tuning code to ide-xfer-mode.cBartlomiej Zolnierkiewicz
* Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move device settings code to ide-devsets.cBartlomiej Zolnierkiewicz
Remove stale comment from ide.c while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_do_park_unpark() to ide-park.cBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: factor out processing of special commands from ide_special_rq()Bartlomiej Zolnierkiewicz
Factor out processing of special commands from ide_special_rq() to ide_do_devset() and ide_do_park_unpark(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove ide_do_drive_cmd()Bartlomiej Zolnierkiewicz
* Use elv_add_request() instead of __elv_add_request() in ide_do_drive_cmd(). * ide_do_drive_cmd() is used only in ide-{atapi,cd}.c so inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_dma_timeout_retry() to ide-dma.cBartlomiej Zolnierkiewicz
Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move drive_is_ready() to ide-io.cBartlomiej Zolnierkiewicz
Move drive_is_ready() to ide-io.c, then make it static. Also make some minor CodingStyle fixups while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: unexport ide_devset_execute()Bartlomiej Zolnierkiewicz
There are no modular ide_devset_execute() users left so unexport it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove stale comments from drive_is_ready()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide-acpi: remove taskfile_load_raw()Bartlomiej Zolnierkiewicz
* taskfile_load_raw() is used only by do_drive_set_taskfiles() so inline it there. While at it: - rename 'args' variable to 'task' - remove struct taskfile_array - do ide_acpigtf check early - use REGS_PER_GTF Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide-acpi: cleanup do_drive_set_taskfiles()Bartlomiej Zolnierkiewicz
* ide_noacpi is already checked by ide_acpi_exec_tfs() which is the only user of do_drive_set_taskfiles(). * ide_acpi_exec_tfs() prints sufficient debug info about the device so no need to do it again. * do_drive_get_GTF() + ide_acpi_exec_tfs() make sure that this function will never be called with incorrect gtf_length argument or if device is not present. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide-acpi: cleanup do_drive_get_GTF()Bartlomiej Zolnierkiewicz
* ide_noacpi is already checked by ide_acpi_exec_tfs() which is the only user of do_drive_get_GTF(). * ide_acpi_exec_tfs() prints sufficient debug info about the device so no need to have excessive data about port/host. * It is sufficient to check for drive->acpidata->obj_handle as it will be NULL if dev == NULL or hwif->acpidata == NULL or device is not present. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: sanitize ACPI initializationBartlomiej Zolnierkiewicz
* ide_acpi_init() -> ide_acpi_init_port() * ide_acpi_blacklist() -> ide_acpi_init() * Call ide_acpi_init() only once (do it during IDE core initialization) and cleanup the function accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: add ide_for_each_present_dev() iteratorBartlomiej Zolnierkiewicz
* Add ide_for_each_present_dev() iterator and convert IDE code to use it. * Do some drive-by CodingStyle fixups in ide-acpi.c while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide-acpi: init ACPI handles early for devicesBartlomiej Zolnierkiewicz
Init ACPI handles for devices in ide_acpi_port_init_devices() and remove no longer needed ide_acpi_drive_get_handle(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide-acpi: no need to zero ->acpidata for devicesBartlomiej Zolnierkiewicz
ide_acpi_init() takes care of it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove superfluous check from ide_proc_port_register_devices()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: init_irq() doesn't need to hold ide_cfg_mtxBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ->lock and ->timer init from init_irq() to ide_init_port_data()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: no need to touch local IRQs in ide_probe_port()Bartlomiej Zolnierkiewicz
Remove superfluous local_save_flags() local_irq_enable_in_hardirq() ... local_irq_restore() combo. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_pktcmd_tf_load() to ide-atapi.cBartlomiej Zolnierkiewicz
Then make it static and remove 'dma' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix IDE_DFLAG_NO_IO_32BIT handlingBartlomiej Zolnierkiewicz
* IDE_DFLAG_NO_IO_32BIT may be set by cmd640's ->init_dev method so don't clear it in ide_port_tune_devices() (+ no need to do it). * Move IDE_DFLAG_NO_IO_32BIT handling to ide_port_init_devices(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-23Linux 2.6.29Linus Torvalds
2009-03-23Build with -fno-dwarf2-cfi-asmKyle McMartin
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23trivial: fix orphan dates in ext2 documentationJody McIntyre
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by: Jody McIntyre <scjody@sun.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 06:43:31 +0000