aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: remove NET_RX_BAD and NET_RX_CN* definesFlorian Westphal
almost no users in the tree; and the few that use them treat them like NET_RX_DROP. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-07-05dsa: fix 88e6xxx statistics counter snapshottingStephane Contri
The bit that tells us whether a statistics counter snapshot operation has completed is located in the GLOBAL register block, not in the GLOBAL2 register block, so fix up mv88e6xxx_stats_wait() to poll the right register address. Signed-off-by: Stephane Contri <Stephane.Contri@grassvalley.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05forcedeth: Fix NAPI race.Eric Dumazet
Eric Dumazet a écrit : > Ingo Molnar a écrit : >>> The following changes since commit 52989765629e7d182b4f146050ebba0abf2cb0b7: >>> Linus Torvalds (1): >>> Merge git://git.kernel.org/.../davem/net-2.6 >>> >>> are available in the git repository at: >>> >>> master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git master >> Hm, something in this lot quickly wrecked networking here - see the >> tx timeout dump below. It starts with: >> >> [ 351.004596] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0x10b/0x19c() >> [ 351.011815] Hardware name: System Product Name >> [ 351.016220] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out >> >> Config attached. Unfortunately i've got no time to do bisection >> today. > > > > forcedeth might have a problem, in its netif_wake_queue() logic, but > I could not see why a recent patch could make this problem visible now. > > CPU0/1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > is not a new cpu either :) > > forcedeth uses an internal tx_stop without appropriate barrier. > > Could you try following patch ? > > (random guess as I dont have much time right now) We might have a race in napi_schedule(), leaving interrupts disabled forever. I cannot test this patch, I dont have the hardware... Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05drivers/net/smsc911x.c: Fix resource size off by 1 errorJulia Lawall
The call resource_size(res) returns res->end - res->start + 1 and thus the second change is semantics-preserving. res_size is then used as the second argument of a call to request_mem_region, and the memory allocated by this call appears to be the same as what is released in the two calls to release_mem_region. So the size argument for those calls should be resource_size(size) as well. Alternatively, in the second call to release_mem_region, the second argument could be res_size, as that variable has already been initialized at the point of this call. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05pcnet_cs: add new idKen Kawasaki
add new id (RIOS System PC CARD3 ETHERNET). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Fix the maximal values of coalescing timeouts.Eilon Greenstein
This patch properly defines the maximum values for rx/tx coalescing timeouts. Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Disable HC coalescing when setting timeout to zero.Eilon Greenstein
Problem reported by Flavio Leitner <fleitner@redhat.com>: When setting rx/tx coalescing timeout to the values less than 12 traffic was stopped. The FW supports coalescing in 12us granularity, and so value of less then 12 should be interpreted as disabling coalescing Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05tun: Fix device unregister raceHerbert Xu
It is currently possible for an asynchronous device unregister to cause the same tun device to be unregistered twice. This is because the unregister in tun_chr_close only checks whether __tun_get(tfile) != NULL. This however has nothing to do with whether the device has already been unregistered. All it tells you is whether __tun_detach has been called. This patch fixes this by using the most obvious thing to test whether the device has been unregistered. It also moves __tun_detach outside of rtnl_unlock since nothing that it does requires that lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-04Linux 2.6.31-rc2Linus Torvalds
2009-07-04video: sm501fb: Early initialization of mm_lock mutex.Paul Mundt
Commit 537a1bf059fa312355696fa6db80726e655e7f17 (fbdev: add mutex for fb_mmap locking) introduces a ->mm_lock mutex for protecting smem assignments. Unfortunately in the case of sm501fb these happen quite early in the initialization code, well before the mutex_init() that takes place in register_framebuffer(), leading to: Badness at kernel/mutex.c:207 Pid : 1, Comm: swapper CPU : 0 Not tainted (2.6.31-rc1-00284-g529ba0d-dirty #2273) PC is at __mutex_lock_slowpath+0x72/0x1bc PR is at __mutex_lock_slowpath+0x66/0x1bc ... matroxfb appears to have the same issue and has solved it with an early mutex_init(), so we do the same for sm501fb. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits) parisc: use generic atomic64 on 32-bit parisc: superio: fix build breakage parisc: Fix PCI resource allocation on non-PAT SBA machines parisc: perf: wire up sys_perf_counter_open parisc: add task_pt_regs macro parisc: wire sys_perf_counter_open to sys_ni_syscall parisc: inventory.c, fix bloated stack frame parisc: processor.c, fix bloated stack frame parisc: fix compile warning in mm/init.c parisc: remove dead code from sys_parisc32.c parisc: wire up rt_tgsigqueueinfo parisc: ensure broadcast tlb purge runs single threaded parisc: fix "delay!" timer handling parisc: fix mismatched parenthesis in memcpy.c parisc: Fix gcc 4.4 warning in lba_pci.c parisc: add parameter to read_cr16() parisc: decode_exc.c should include kernel.h parisc: remove obsolete hw_interrupt_type parisc: fix irq compile bugs in arch/parisc/kernel/irq.c parisc: advertise PCI devs after "assign_resources" ... Manually fixed up trivial conflicts in tools/perf/perf.h due to addition of SH vs HPPA perf-counter support.
2009-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: fix pcap adc locking mfd: sm501, fix lock imbalance
2009-07-04Merge branch 'for-2.6.31' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.31' of git://linux-nfs.org/~bfields/linux: NFSD: Don't hold unrefcounted creds over call to nfsd_setuser()
2009-07-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Fix CONFIG_FLATMEM version of pfn_valid() MIPS: Reorganize Cavium OCTEON PCI support. Update Yoichi Yuasa's e-mail address MIPS: Allow suspend and hibernation again on uniprocessor kernels. MIPS: 64-bit: Fix o32 core dump MIPS: BC47xx: Fix SSB irq setup MIPS: CMP: Update sync-r4k for current kernel MIPS: CMP: Move gcmp_probe to before the SMP ops MIPS: CMP: activate CMP support MIPS: CMP: Extend IPI handling to CPU number MIPS: CMP: Extend the GIC IPI interrupts beyond 32 MIPS: Define __arch_swab64 for all mips r2 cpus MIPS: Update VR41xx GPIO driver to use gpiolib MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open. MIPS: Malta: Remove unnecessary function prototypes MIPS: MT: Remove unnecessary semicolons MIPS: Add support for Texas Instruments AR7 System-on-a-Chip
2009-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: do not set DEVNAME for OSS devices ALSA: hda - Add sanity check in PCM open callback ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callback ALSA: hda - Avoid invalid formats and rates with shared SPDIF ALSA: hda - Improve ASUS eeePC 1000 mixer ALSA: hda - Add GPIO1 control at muting with HP laptops ALSA: usx2y - reparent sound device ALSA: snd_usb_caiaq: reparent sound device sound: virtuoso: fix Xonar D1/DX silence after resume ASoC: Only disable pxa2xx-i2s clocks if we enabled them ALSA: hda - Add quirk for HP 6930p ALSA: hda - Add missing static to patch_ca0110() ASoC: OMAP: fix OMAP1510 broken PCM pointer callback ASoC: remove BROKEN from Efika and pcm030 fabric drivers ASoC: Fix typo in MPC5200 PSC AC97 driver Kconfig
2009-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: finally remove the obsolete variable $TOPDIR gitignore: ignore scripts/ihex2fw Kbuild: Disable the -Wformat-security gcc flag gitignore: ignore gcov output files kbuild: deb-pkg ship changelog Add new __init_task_data macro to be used in arch init_task.c files. asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h Add new macros for page-aligned data and bss sections. asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't merge requests of different failfast settings cciss: Ignore stale commands after reboot
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: disable K1 at 1000Mbps for 82577/82578Bruce Allan
This workaround is required for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay second read of PHY_STATUS register on failure of first readBruce Allan
Some PHYs may require two reads of the PHY_STATUS register to determine the link status. If the PHY is being accessed by another thread it is possible the first read could timeout and fail. In this case, put a delay in so the second read will pick up the correct link status. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: prevent NVM corruption on sectors larger than 4KBruce Allan
Limit NVM writes to 4K sections to prevent NVM corruption on larger sector allocations (up to 64K). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: do not write SmartSpeed register bits on parts without supportBruce Allan
The driver was accessing register bits for features on parts that do not support that feature. This could cause problems in the hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay after LCD reset and proper checks for PHY configuration doneBruce Allan
A previous workaround for 82578 to avoid link stall causes some PHY registers to get cleared inadvertently. Add a delay after all LCD resets to make sure PHY registers are in a stable state before continuing. Also, after resets check the EEC register for the state of PHY configuration performed by the MAC for ICH9 and earlier parts (as done before), but check the LAN_INIT_DONE bit in the STATUS register for ICH10 and newer parts (EEC doesn't exist in these newer parts). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: PHY loopback broken on 82578Bruce Allan
PHY loopback on 82578 fails to work as a result of flushing the packets in the FIFO buffer in the link stall workaround. Don't perform the workaround if in PHY loopback mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: Not allow 8259x unsupported wol options change from ethtoolMallikarjuna R Chilakala
Wake-on-lan is currently only supported by 82599 KX4 devices, in all other cases return a proper value from ixgbe_wol_exclusion function call. Otherwise from ethtool we will be able to change wol options of unsupported 8259x devices. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix inconsistent SFP/SFP+ failure results.Don Skidmore
Currently if we loaded the driver, insert an unsupported module, and then attempt to "ifconfig up" the device it will be brought down but the netdev would not be unregistered. This behavior is different than all other code paths. This patch corrects that by down'ing the device and then scheduling the sfp_config_module_task tasklet. The tasklet will detect this condition (like it does with other code paths) and do the unregister_netdev(). I also removed the log message as this condition (an unsupported SFP+ module) will be logged in sfp_config_module_task. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix regression on some 82598 adaptersDon Skidmore
The change to check the SFP+ module again on open() was causing the XFP (non-SFP+) adapters to be rejected. We only want to try and re-identify the SFP+ module if the original probe found that this device was an SFP+ device. So for this code path (driver loaded with SFP module, module inserted, ifconfig up of the device) the type will be ixgbe_phy_unknown for an unidentified SFP+ module. So we only check if that is the case. This problem also shows up on Copper devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix issues with failing to detect insert of unsupported moduleDon Skidmore
Several small fixes around negative test case of the insertion of a IXGBE_ERR_NOT_SUPPORTED module. - mdio45_probe call was always failing due to mdio.prtad not being set. The function set to mdio.mdio_read was still working as we just happen to always be at prtad == 0. This will allow us to set the phy_id and phy.type correctly now. - There was timing issue with i2c calls when initiated from a tasklet. A small delay was added to allow the electrical oscillation to calm down. - Logic change in ixgbe_sfp_task that allows NOT_SUPPORTED condition to be recognized. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix sizeof usage.Ron Mercer
Some usage was only sizing a pointer rather than the data type. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Add/use function for link up/down.Ron Mercer
We need to set/clear the mac address register when the link goes up/down respectively. Without this both ports of a 2-port device can end up with the same mac address in a bonding scenario. The new ql_link_on() and ql_link_off() will also be used in handling certain firmware events. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix MAC address bonding issue.Ron Mercer
This addes functionality to set/clear the MAC address in the hardware when the link goes up/down. The MAC address register is persistent across function resets. In bonding the same address can bounce from one port to the other. This can cause packets to be delivered to the wrong port. This patch clears the MAC address in the hardware when the link is down and sets it when the link comes up. It was found that pulling/pushing the cable from one port to another causes the same MAC address to be in both ports. The next patch in this series will use this functionality as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix tx byte counter.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix redundant call to free resources.Ron Mercer
The caller will free acquired resouces if a failure occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix carrier on condition.Ron Mercer
We were turning on the carrier without verifying the link was up. This adds link up to the link initialize check before turning carrier on. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Clear frame to queue routing before reset.Ron Mercer
Not clearing the routing bits can cause frames to erroneously get routed to management processor. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Expand coverage of hw lock for config register.Ron Mercer
The hardware semaphore covers the configuration register as well as the ICB registers. The ICB high and low regs contain the address of the initialization control block and the config register is used to signal the hardware that a block is ready to be downloaded. Currently we were only protecting the ICB regs. This changes expands to cover the config register as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03IPv6: preferred lifetime of address not getting updatedBrian Haley
There's a bug in addrconf_prefix_rcv() where it won't update the preferred lifetime of an IPv6 address if the current valid lifetime of the address is less than 2 hours (the minimum value in the RA). For example, If I send a router advertisement with a prefix that has valid lifetime = preferred lifetime = 2 hours we'll build this address: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7175sec preferred_lft 7175sec If I then send the same prefix with valid lifetime = preferred lifetime = 0 it will be ignored since the minimum valid lifetime is 2 hours: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7161sec preferred_lft 7161sec But according to RFC 4862 we should always reset the preferred lifetime even if the valid lifetime is invalid, which would cause the address to immediately get deprecated. So with this patch we'd see this: 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:21f:29ff:fe5a:ef04/64 scope global deprecated dynamic valid_lft 7163sec preferred_lft 0sec The comment winds-up being 5x the size of the code to fix the problem. Update the preferred lifetime of IPv6 addresses derived from a prefix info option in a router advertisement even if the valid lifetime in the option is invalid, as specified in RFC 4862 Section 5.5.3e. Fixes an issue where an address will not immediately become deprecated. Reported by Jens Rosenboom. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03xfrm6: fix the proto and ports decode of sctp protocolWei Yongjun
The SCTP pushed the skb above the sctp chunk header, so the check of pskb_may_pull(skb, nh + offset + 1 - skb->data) in _decode_session6() will never return 0 and the ports decode of sctp will always fail. (nh + offset + 1 - skb->data < 0) Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03xfrm4: fix the ports decode of sctp protocolWei Yongjun
The SCTP pushed the skb data above the sctp chunk header, so the check of pskb_may_pull(skb, xprth + 4 - skb->data) in _decode_session4() will never return 0 because xprth + 4 - skb->data < 0, the ports decode of sctp will always fail. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03Merge branch 'fix/soundcore' into for-linusTakashi Iwai
* fix/soundcore: sound: do not set DEVNAME for OSS devices
2009-07-03Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Add sanity check in PCM open callback ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callback ALSA: hda - Avoid invalid formats and rates with shared SPDIF ALSA: hda - Improve ASUS eeePC 1000 mixer ALSA: hda - Add GPIO1 control at muting with HP laptops
2009-07-03sound: do not set DEVNAME for OSS devicesKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03ALSA: hda - Add sanity check in PCM open callbackTakashi Iwai
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callbackTakashi Iwai
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03ALSA: hda - Avoid invalid formats and rates with shared SPDIFTakashi Iwai
Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-03block: don't merge requests of different failfast settingsTejun Heo
Block layer used to merge requests and bios with different failfast settings. This caused regular IOs to fail prematurely when they were merged into failfast requests for readahead. Niel Lambrechts could trigger the problem semi-reliably on ext4 when resuming from STR. ext4 uses readahead when reading inodes and combined with the deterministic extra SATA PHY exception cycle during resume on the specific configuration, non-readahead inode read would fail causing ext4 errors. Please read the following thread for details. http://lkml.org/lkml/2009/5/23/21 This patch makes block layer reject merging if the failfast settings don't match. This is correct but likely to lower IO performance by preventing regular IOs from mingling into surrounding readahead requests. Changes to allow such mixed merges and handle errors correctly will be added later. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com> Cc: Theodore Tso <tytso@mit.edu> Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-03cciss: Ignore stale commands after rebootHannes Reinecke
When doing an unexpected shutdown like kexec the cciss firmware might still have some commands in flight, which it is trying to complete. The driver is doing it's best on resetting the HBA, but sadly there's a firmware issue causing the firmware _not_ to abort or drop old commands. So the firmware will send us commands which we haven't accounted for, causing the driver to panic. With this patch we're just ignoring these commands as there is nothing we could be doing with them anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-03MIPS: Fix CONFIG_FLATMEM version of pfn_valid()Ralf Baechle
For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely have returned 0 on most configurations. Bug introduced by commit 752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp. 6f284a2ce7b8bc49cb8455b1763357897a899abb (kernel.org) titled "[MIPS] FLATMEM: introduce PHYS_OFFSET." Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 10:13:38 +0000