aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-08mac80211: fix sta-info pinningJohannes Berg
When a STA is supposed to be unlinked but is pinned, it still needs to be unlinked from all structures. Only at the end of the unlink process should we check for pin status and invalidate the callers reference if it is pinned. Move the pin status check down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: fix defined but not usedJiri Slaby
These two symbols are used only in ifdeffed function. Move them to that section too. net/mac80211/sta_info.c:387: warning: `__sta_info_pin' defined but not used net/mac80211/sta_info.c:397: warning: `__sta_info_unpin' defined but not used Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Michael Wu <flamingice@sourmilk.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08adm8211: remove commented-out codePavel Machek
Remove some commented-out code from adm8211. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: BA session debug prints changesRon Rindjunsky
This patch contains next issues: 1 - prevents "stop BA session" multiple warnings 2 - adds debug print to stop Rx BA session flow 3 - adds EOL in one debug print Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: use b43_is_mode() callMichael Buesch
We must use the b43_is_mode() call to check the current interface operation mode. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Fix PHY TX control words in SHMMichael Buesch
This fixes the initialization of the PHY TX control words in shared memory. These control words are used for management frames like beacons. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Fix beacon BH updateMichael Buesch
This fixes beacon updating in the bottomhalf. In case the device is busy, we will defer to later in the IRQ handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: notify mac from low level driver (iwlwifi)Mohamed Abbas
Add new API to MAC80211 to allow low level driver to notify MAC with driver status. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: fix ieee80211_ioctl_giwrateJohannes Berg
The ieee80211_ioctl_giwrate() ioctl handler doesn't rcu_read_lock() its access to the sta table, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: make debugfs files root-onlyJohannes Berg
Unfortunately, debugfs can be made to access invalid memory by open()ing a file and then waiting until the corresponding debugfs file has been removed (and, probably, the underlying object.) That could be exploited by any user if the user is able to open debugfs files and can cause networking devices, STA entries or similar to disappear which is quite easy to do. Hence, all debugfs files should be root-only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Beaconing fixesMichael Buesch
These are some beaconing related fixes. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: honour regulatory restrictions in scan codeJohannes Berg
When doing firmware-assisted scanning, iwlwifi drivers do not honour the regulatory control code that might disable channels that are enabled in the EEPROM, for example when the user is visiting another country and adjusted the regulatory domain accordingly. This patch fixes that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: notify upper layers after lowerReinette Chatre
When drivers receive change notification they may do work that will enable the changes to take effect. For example, if new association the device needs to be programmed with this information. Give the driver chance to make the changes before notifying the upper layer - thus preventing race condition where upper layer attempts to utilize state that may not be configured yet. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: fix rfkill memory errorMohamed Abbas
Do not free reference to device twice. After rfkill registration succeeds we only need to call rfkill_unregister() and not rfkill_free(). Also add some debugging. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: ensure led registration complete as part of initializationReinette Chatre
After the workqueue is notified the LED code may be accessed. Ensure that LED registration completes completely as part of initialization before anything waiting on this is notified. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: use ieee80211_frequency_to_channelTomas Winkler
This patch replaces ieee80211chan2mhz from radiotap with ieee80211_frequency_to_channel provided by mac80211 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: move driver status inliners into iwl-core.hTomas Winkler
This patch moves inline functions into iwl-core.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: hw names cleanupTomas Winkler
This patch make some cleanup in HW names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08rt2x00: Use lib->config_filter() during scheduled packet filter configIvo van Doorn
Now rt2x00lib handles the initial configure_filter() command, we can directly call lib->config_filter() in scheduled context since the called function will no longer check if anything has changed (which is now handled in rt2x00lib as well). This fixes a endless loop with USB drivers where the config_filter command was scheduled time and time again without sending any command to the device. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08cfg80211: default to regulatory max power for channelJohn W. Linville
If the driver does not specify a maximum power output, default to the regulatory max. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Fix TBTT and PU timingsMichael Buesch
This fixes some timings for pre-TBTT and synthetic PU. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Add more N-PHY stuffMichael Buesch
This adds some minor stuff for N-PHY support. Nothing special. Adds Analog switching and some TODOs for RSSI processing. Just a patch I had floating around for quite some time now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: clean up IEEE80211_FC useJohannes Berg
Really doesn't need to be defined four times. Also, while at it, remove a useless macro (IEEE80211_ALIGN32_PAD) and a function prototype for a function we don't actually have (ieee80211_set_compression.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: fix possible sta-debugfs work lockupJohannes Berg
Because we queue the sta-debugfs-adding work on our mac80211 workqueue (which needs to be flushed under RTNL) and that work needs the RTNL, it can currently deadlock, thanks to Reinette Chatre for pointing out the lockdep warning about this. This patch fixes it by moving this work to the common kernel workqueue (using schedule_work) and canceling it as appropriate. It also fixes a related problem: When a STA is pinned by the debugfs adding work and sta_info_flush() runs concurrently it is not guaranteed that all STAs are removed from the driver before the corresponding interface is removed which may lead to bugs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Use SSB block-I/O to do PIOMichael Buesch
This changes the b43-PIO code to use the new SSB block-I/O. This reduces the overhead by removing lots of function calls, pointer dereferencing, if-conditionals any byteswapping for each packet data word. This also fixes a harmless sparse endianness warning. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwl4965: use IWLWIFI_LEDS config variableReinette Chatre
Fix error reported by Miles Lane <miles.lane@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: Miles Lane <miles.lane@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Add support for block-I/OMichael Buesch
This adds support for block based I/O to SSB. This is needed in order to efficiently support PIO data transfers to the card. The block-I/O support is only compiled, if it's selected by the weird driver that needs it. So there's no overhead for sane devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08drivers/net/wireless/iwlwifi/iwl-3945.h: correct CONFIG_IWL4965_LEDS typoJohn W. Linville
Thakns to Winfried Tilanus <winfried@tilanus.com> for identifying the problem! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Fix build for non-PCIhostMichael Buesch
This fixes a build error when PCMCIA-host support is built, but PCI-host support is disabled. Hell, who on earth would use such a weird configuration. :D drivers/built-in.o: In function `ssb_attr_sprom_store': (.text+0x1c4b79): undefined reference to `ssb_devices_freeze' drivers/built-in.o: In function `ssb_attr_sprom_store': (.text+0x1c4bb3): undefined reference to `ssb_devices_thaw' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: remove lbs_get_fwversion()Holger Schurig
It was used only at one place anyway. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move lbs_update_channel out of assoc.cHolger Schurig
... as it has nothing to do with pure association Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move association code from scan.c into assoc.cHolger Schurig
Besides code moving, I did the following changes: * made some functions static * removed some unneeded #include's * made patch checkpatch.pl clean Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move association code from join.c into scan.cHolger Schurig
Besides code moving, I did the following changes: * made some functions static * removed some unneeded #include's * made patch checkpatch.pl clean Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi/Kconfg: make IWLWIFI_LEDS invisibleJohn W. Linville
Select IWLWIFI_LEDS automatically when either IWL3945_LEDS or IWL4965_LEDS is selected. This avoids potential misconfigurations which lead to build failures for iwl-led.c. Cc: Miles Lane <miles.lane@gmail.com> Cc: reinette.chatre@intel.com Signed-off-by: John w. Linville <linville@tuxdriver.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: fix some warningsJohannes Berg
This fixes all kinds of warnings in iwlwifi. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08drivers/net/wireless/iwlwifi/iwl-debugfs.c: fix another '%llu' warningJohn W. Linville
drivers/net/wireless/iwlwifi/iwl-debugfs.c: In function ‘iwl_dbgfs_stations_read’: drivers/net/wireless/iwlwifi/iwl-debugfs.c:247: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 4 has type ‘u64’ Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: add station aid into ieee80211_tx_controlChr
This patch is necessary for the upcoming Accesspoint patch for p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08wavelan_cs: stop inlining largish static functionsDenys Vlasenko
Hi John, Can you please take a look at this patch? drivers/net/wireless/wavelan_cs.c has unusually large number of static inline functions - 27. I looked through them and 20 of them do not seem to warrant inlining. Some are really big; others call mdelay(1) or busy-wait for a bit to be set in a hardware register - it's pointless to optimize such functions for speed. This patch removes "inline" from these static function (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference for 32bit x86: text data bss dec hex filename 17020 372 8 17400 43f8 linux-2.6-ALLYES/drivers/net/wireless/wavelan_cs.o 14032 356 8 14396 383c linux-2.6.inline-ALLYES/drivers/net/wireless/wavelan_cs.o Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> -- vda Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08prism54: set carrier flags correctlyLuis R. Rodriguez
> prism54 should set the carrier flags correctly when it thinks the > link can be used. Agreed, so sure, this is OK but I rather we turn the carrier on or off *before* sending an event, like this. Signed-off-by: Roy Marples <uberlord@gentoo.org> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Turn suspend/resume upside downMichael Buesch
Turn the SSB bus suspend mechanism upside down. Instead of deciding by an internal reference count when to suspend/resume, let the parent bus call us in their suspend/resume routine. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Add PIO support for PCMCIA devicesMichael Buesch
This adds PIO support back (D'oh!) for PCMCIA devices. This is a complete rewrite of the old PIO code. It does actually work and we get reasonable performance out of it on a modern machine. On a PowerBook G4 I get a few MBit for TX and a few more for RX. So it doesn't work as well as DMA (of course), but it's a _lot_ faster than the old PIO code (only got a few kBit with that). The limiting factor is the host CPU speed. So it will generate 100% CPU usage when the network interface is heavily loaded. A voluntary preemption point in the RX path makes sure Desktop Latency isn't hurt. PIO is needed for 16bit PCMCIA devices, as we really don't want to poke with the braindead DMA mechanisms on PCMCIA sockets. Additionally, not all PCMCIA sockets do actually support DMA in 16bit mode (mine doesn't). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: Eliminate association from beaconTomas Winkler
This patch removes association from beacon using bss_info_change handler for association Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: add association capabilty and timing info into bss_confTomas Winkler
This patch adds assocation capability, timestamp (tsf) and beacon interval to bss_conf. This is required for successful assocation of iwlwifi drivers Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08iwlwifi: eliminate conf_htTomas Winkler
This patch eliminates the use of conf_ht in iwlwifi driver, replacing it with bss_info_changed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: eliminate conf_htTomas Winkler
This patch eliminates the use of conf_ht, replacing it with bss_info_changed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb-pcmcia: IRQ and DMA related fixesMichael Buesch
Here come some IRQ and DMA related fixes for the ssb PCMCIA-host code. Not much to say, actually. I think the patch explains itself. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08Revert "mac80211: use a struct for bss->mesh_config"John W. Linville
This reverts commit 6c4711b4697d93424e4b1f76a9929ba844d714a5. That patch breaks mesh config comparison between beacons/probe reponses, so every beacon from a mesh network would be added as a new bss. Since the comparison has to be performed for every received beacon I believe it is best to save the mesh config in a format easy to compare, rather than do a bunch of unaligned accesses to compare field by field. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08Merge branch 'net-2.6.26-isatap-20080403' of ↵David S. Miller
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev
2008-04-05[IPV6] MROUTE: Use skb_tail_pointer(skb) instead of skb->tail.YOSHIFUJI Hideaki
This bug resulted in compilation error on 64bit machines. Pointed out by Rami Rosen <roszenrami@gmail.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-05[IPV6]: Comment MRT6_xxx sockopts in include/linux/in6.h.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:47:52 +0000