aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-05ath9k: Set TSF fixAlina Friedrichsen
The old code doesn't work correctly e.g. on newer chipsets like AR5418+AR2122 and AR5416+AR2133. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05b43: Pass more RX flags to mac80211Michael Buesch
This changes the RX handler to pass more status flags to mac80211. It also changes part of the drop policy, if bad frames were requested. (Note that currently mac80211 will throw a WARN_ON in that case. But nothing bad will happen). This also removes some obsolete unused timestamping code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fix FIF_BCN_PRBRESP_PROMISC handlingAlina Friedrichsen
So that a new created IBSS network doesn't break on the first scan. It seems to Sujith and me that this stupid code unnecessary, too. So remove it... Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Handle power modes in isr for power save.Vivek Natarajan
Restore network sleep mode in isr if power save is enabled. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fill in rate_update mac80211 callbackSujith
This callback can be used to handle dynamic 20/40, and changes in the operating channel's HT parameters. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Always send a null data frame if TIM bit is set.Vivek Natarajan
If the AP thinks we are in power save state eventhough we are not truly in that state, it sets the TIM bit and does not send a data frame unless we send a null data frame to correct the state in the AP. This might happen if the null data frame for wake up is lost in the air after we disable power save. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove unused key xoringJouni Malinen
This is not used anywhere in ath9k and is just making the code more confusing. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Document keycache operationsJouni Malinen
There are number of small details about the keycache operations that are very easy to miss (and forget), so better include detailed comments in ath9k_hw_set_keycache_entry() to avoid having to figure out this every time when having to touch this area. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Fix TKIP/WEP HT capability handlingSujith
There is no need to parse the AP's HT capabilities if the STA uses TKIP/WEP cipher. This allows the rate control module to choose the correct(legacy) rate table. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: reduce stack sizeFrank Seidel
Reduce stack memory footprint of iwlwifi. (From >1000 bytes for each *_table_read on i386 down to 32) Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00: Fix SW antenna diversityIvo van Doorn
Software antenna tuning is broken because of an function ordering problem during rt2x00link_tuner(). rt2x00link_precalculate_signal() rt2x00leds_led_quality() rt2x00lib_antenna_diversity() rt2x00link_precalculate_signal() will reset the quality TX/RX counters, however rt2x00lib_antenna_diversity() requires the RX counter to see what RSSI value must be used for a particular antenna. We can't change the ordering since rt2x00lib_antenna_diversity() might reset other statistics which are needed by the function called earlier. Move the reset of the quality TX/RX counters into a seperate function and move the call to after rt2x00lib_antenna_diversity(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945 : use iwl_activate_qosAbhijeet Kolekar
3945 can use iwl_activate_qos instead of iwl3945_activate_qos. Patch does two things 1) Patch adds iwl_activate_qos in core library. 2) 3945 makes use of iwl_activate_qos. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: add iwl3945_setup_macAbhijeet Kolekar
Patch does following, 1) mac80211's shared data is now initialized in iwl3945_setup_mac. 2) Set the rfkill to right state after initialization Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: fix *pci_probe error flowReinette Chatre
for iwlagn: - Have to free eeprom of version check fails - otherwise we end up with memory leak. - Include removal of workqueue (created in _setup_deferred_work) in error handling. for iwl3945: - Fix a few places to jump to correct error handling. - Reorganize error handling to match with code flow. - Include iwl_free_channel_map as part of error handling. - Include releasing eeprom as part of error handling. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: unify set key flow with iwlwifiAbhijeet Kolekar
unify the set key flow with iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwl3945: synchronize timestamp with uCodeAbhijeet Kolekar
In IBSS, TSF maintains local clock counters at each station. Network Synchronization follows a completely distributed scheme where beacon frames are generated. Each station maintain its own TSF timestamp, extracted from beacon timestamps they recieved. Following patch synchronize this beacon timestamp with uCode. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: update 5150 API version to support new firmwareJay Sternberg
update API to support new numbering that is used for other newer devices. 5150 ucode has not been released yet, so the first released API will be v2. For those who do have a v1 API the driver does have backward compatibility support new value of REPLY_TX_POWER_DBM_CMD Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Fix quality reporting for wireless statsJohannes Berg
Since "mac80211/cfg80211: move iwrange handler to cfg80211", the results for link quality from "iwlist scan" and "iwconfig" commands have been very different. The results are now consistent. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported- and tested-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ssb: Add SPROM fallback supportMichael Buesch
This adds SSB functionality to register a fallback SPROM image from the architecture setup code. Weird architectures exist that have half-assed SSB devices without SPROM attached to their PCI busses. The architecture can register a fallback SPROM image that is used if no SPROM is found on the SSB device. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Notify the driver only when the beacon interval changesSujith
Currently, the driver is unconditionally notified of beacon interval. This is a problem in AP mode, because the driver has to know that the beacon interval has actualy changed to recalculate TBTT and reset the HW TSF. Fix this to make mac80211 notify the driver only when the beacon interval has been reconfigured to a new value. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: fix hw rate index conditionJiri Slaby
Make sure we print out a warning when the index is out of bounds, i.e. even on hw_rix == AR5K_MAX_RATES. Also change to WARN and print text with the reported hw_rix. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Fix hw crypto configuration for TKIP in AP modeJouni Malinen
Incorrect Michael MIC key (RX, should have been TX) was set for the group key in AP mode. This resulted in all broadcast frames triggering Michael MIC errors and eventual TKIP countermeasures. The change here sets the correct Michael MIC key based on whether the local end is the authenticator (well, AP for now). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05airo: reduce stack memory footprintFrank Seidel
Applying kernel janitors todos (reduce stack footprint where possible) to airo wireless driver. (Before 1124 bytes on i386, now 876) Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05wireless, wavelan: spin off by 1Roel Kluin
spin can reach -1 after the loop, so 0 is still success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Remove ununsed ack duration stuff with long/short preambleVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Configure Power control register appropriately for h/w with 4k eepromVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05zd1211rw: Implement get_tsf()Alina Friedrichsen
This patch implements get_tsf() of ieee80211_ops in the zd1211rw driver. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add module parameter to disable hardware cryptoJouni Malinen
nohwcrypt=1 module parameter can now be used to disable hardware crypto in ath9k. While the hardware acceleration handles most cases, it may be useful to be able to force mac80211 software implementation to be used for some tests, e.g., with virtual interface combinations that may not yet be supported in the key cache configuration. In addition, this allows management frame protection to be tested with older hardware revisions. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tokenring/tmspci.c drivers/net/ucc_geth_mii.c
2009-03-05bonding: Fix device passed into ->ndo_neigh_setup().Patrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-03-04vlan: Fix vlan-in-vlan crashes.David S. Miller
As analyzed by Patrick McHardy, vlan needs to reset it's netdev_ops pointer in it's ->init() function but this leaves the compat method pointers stale. Add a netdev_resync_ops() and call it from the vlan code. Any other driver which changes ->netdev_ops after register_netdevice() will need to call this new function after doing so too. With help from Patrick McHardy. Tested-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04net: Fix missing dev->neigh_setup in register_netdevice().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04tmspci: fix request_irq raceMeelis Roos
Currently, tmspci tokenring driver crashes on device initialization because it requests its irq before initializing corresponding data structures. Fix this by moving request_irq call to a safer place. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Improve NIC internal error recoveryBen Hutchings
Make the error count a per-NIC variable. Reset this the count after an hour if it has not reached the critical value. Set the critical value back to 5. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Fix search for flush completion eventsBen Hutchings
When flushing queues we disable normal interrupt and event handling and poll event queue 0 looking for flush completions. Unfortunately the flush event polling loop fails to move past any other type of event. This problem has not been observed in production hardware but appears to be a possibility. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Don't wake TX queues while they're being flushedBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Clear I2C adapter structure in falcon_remove_nic()Ben Hutchings
i2c_del_adapter() leaves dangling pointers in the structure. If we retry the NIC probe and pass the structure to i2c_add_adapter() again it will lead to an oops unless we clear it first. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Clean up properly on reset failure pathsBen Hutchings
If MAC switching fails, stop the port properly. If PHY reinitialisation fails, clear the port_initialized flag. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Reject packets from the kernel TX queue during a loopback self-testBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sfc: Fix efx_ethtool_nway_result() to use clause 45 MDIO registersBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04pkt_sched: act_police: Fix a rate estimator test.Jarek Poplawski
A commit c1b56878fb68e9c14070939ea4537ad4db79ffae "tc: policing requires a rate estimator" introduced a test which invalidates previously working configs, based on examples from iproute2: doc/actions/actions-general. This is too rigorous: a rate estimator is needed only when police's "avrate" option is used. Reported-by: Joao Correia <joaomiguelcorreia@gmail.com> Diagnosed-by: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04tg3: Fix 5906 link problemsMatt Carlson
Commit 6833c043f9fc03696fde623914c4a0277df2a0bc introduced the phy auto-powerdown capability. While the APD feature only works for 5761 and 5784 asic revisions, the (harmless portion of the) code was applied to all 5705 and newer devices. However, the 5906 phy departs from the usual design. This commit was interfering with the 5906's ability to negotiate link against some switches. This patch corrects the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Run sbc610 USB fixup code only on the appropriate platform.
2009-03-04drm: fix double lock typoHelge Bahmann
[airlied: you shall not retype patches from other trees half asleep] Signed-of-by: Dave Airlie <airlied@redhat.com>
2009-03-04SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 failsBrian Haley
Change sctp_ctl_sock_init() to try IPv4 if IPv6 socket registration fails. Required if the IPv6 module is loaded with "disable=1", else SCTP will fail to load. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04IPv6: add "disable" module parameter support to ipv6.koBrian Haley
Add "disable" module parameter support to ipv6.ko by specifying "disable=1" on module load. We just do the minimum of initializing inetsw6[] so calls from other modules to inet6_register_protosw() won't OOPs, then bail out. No IPv6 addresses or sockets can be created as a result, and a reboot is required to enable IPv6. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sungem: another error printed one too earlyRoel Kluin
Another error was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04aoe: error printed 1 too earlyRoel Kluin
with while (i-- > 0); i reaches -1 after the loop, so the test below is printed one too early: 0 still means success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04net pcmcia: worklimit reaches -1Roel Kluin
with while (--worklimit >= 0); worklimit reaches -1 after the loop. In 3c589_cs.c this caused a warning not to be printed. In 3c574_cs.c contrastingly, el3_rx() treats worklimit differently: static int el3_rx(struct net_device *dev, int worklimit) { while (--worklimit >= 0) { ... } return worklimit; } el3_rx() is only called by function el3_interrupt(): twice: static irqreturn_t el3_interrupt(int irq, void *dev_id) { int work_budget = max_interrupt_work; while(...) { if (...) work_budget = el3_rx(dev, work_budget); if (...) work_budget = el3_rx(dev, work_budget); if (--work_budget < 0) { ... break; } } } The error path can occur 2 too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 05:43:39 +0000