| Age | Commit message (Collapse) | Author |
|---|
|
e500 has additional interrupt vectors (and corresponding IVORs) for SPE and
performance monitoring interrupts.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
When itlb or dtlb miss happens, E500 needs to update some mmu registers.
So that the auto-load mechanism can work on E500 when write a tlb entry.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
E500 deosn't support this instruction.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Kernel for E500 need clear dbsr when startup.
So add dbsr register in kvm_vcpu_arch for BOOKE.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The Book E code will be shared with e500.
I've left PID in kvmppc_core_emulate_op() just so that we don't need to move
kvmppc_set_pid() right now. Once we have the e500 implementation, we can
probably share that too.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
e500 will provide its own implementation of these.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Passing just the TLB index will ease an e500 implementation.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This is an x86 specific stucture and has no business living in common code.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Certain clocks (such as TSC) in older 2.6 guests overaccount for lost
ticks, causing severe time drift. Interrupt reinjection magnifies the
problem.
Provide an option to disable it.
[avi: allow room for expansion in case we want to disable reinjection
of other timers]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Since we advertise MSR_VM_HSAVE_PA, userspace will attempt to read it
even on Intel. Implement fake support for this MSR to avoid the
warnings.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
vmap() on guest pages hides those pages from the Linux mm for an extended
(userspace determined) amount of time. Get rid of it.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This commit change the name of emulator_read_std into kvm_read_guest_virt,
and add new function name kvm_write_guest_virt that allow writing into a
guest virtual address.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
VMX initializes the TSC offset for each vcpu at different times, and
also reinitializes it for vcpus other than 0 on APIC SIPI message.
This bug causes the TSC's to appear unsynchronized in the guest, even if
the host is good.
Older Linux kernels don't handle the situation very well, so
gettimeofday is likely to go backwards in time:
http://www.mail-archive.com/kvm@vger.kernel.org/msg02955.html
http://sourceforge.net/tracker/index.php?func=detail&aid=2025534&group_id=180599&atid=893831
Fix it by initializating the offset of each vcpu relative to vm creation
time, and moving it from vmx_vcpu_reset to vmx_vcpu_setup, out of the
APIC MP init path.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
No longer used.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Effectively reverting to the pre walk_shadow() version -- but now
with the reusable for_each().
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Eliminating a callback and a useless structure.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Using a for_each loop style removes the need to write callback and nasty
casts.
Implement the walk_shadow() using the for_each_shadow_entry().
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Limit KVM_CAP_SET_GUEST_DEBUG only to those archs (currently x86) that
support it. This simplifies user space stub implementations.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The AMD SVM instruction family all overload the 0f 01 /3 opcode, further
multiplexing on the three r/m bits. But the code decided that anything that
isn't a vmmcall must be an lidt (which shares the 0f 01 /3 opcode, for the
case that mod = 3).
Fix by aborting emulation if this isn't a vmmcall.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
If cr4.pge is cleared, we ought to treat any ptes in the page as non-global.
This allows us to remove the check from set_spte().
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Don't allow a vcpu with cr4.pge cleared to use a shadow page created with
cr4.pge set; this might cause a cr3 switch not to sync ptes that have the
global bit set (the global bit has no effect if !cr4.pge).
This can only occur on smp with different cr4.pge settings for different
vcpus (since a cr4 change will resync the shadow ptes), but there's no
cost to being correct here.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Instead of "calculating" it on every shadow page allocation, set it once
when switching modes, and copy it when allocating pages.
This doesn't buy us much, but sets up the stage for inheriting more
information related to the mmu setup.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Remove some unnecessary blank lines to accord with Kernel's coding style.
Also remove vcpu_get_itir_on_fault due to no reference to it.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Remove the remaining arch fragments of the old guest debug interface
that now break non-x86 builds.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required
for live migrations.
Patch is based on previous implementation that was part of old
GET/SET_REGS ioctl calls.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Add the remaining bits to make use of debug registers also for guest
debugging, thus enabling the use of hardware breakpoints and
watchpoints.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
So far KVM only had basic x86 debug register support, once introduced to
realize guest debugging that way. The guest itself was not able to use
those registers.
This patch now adds (almost) full support for guest self-debugging via
hardware registers. It refactors the code, moving generic parts out of
SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and
it ensures that the registers are properly switched between host and
guest.
This patch also prepares debug register usage by the host. The latter
will (once wired-up by the following patch) allow for hardware
breakpoints/watchpoints in guest code. If this is enabled, the guest
will only see faked debug registers without functionality, but with
content reflecting the guest's modifications.
Tested on Intel only, but SVM /should/ work as well, but who knows...
Known limitations: Trapping on tss switch won't work - most probably on
Intel.
Credits also go to Joerg Roedel - I used his once posted debugging
series as platform for this patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
When single-stepping over STI and MOV SS, we must clear the
corresponding interruptibility bits in the guest state. Otherwise
vmentry fails as it then expects bit 14 (BS) in pending debug exceptions
being set, but that's not correct for the guest debugging case.
Note that clearing those bits is safe as we check for interruptibility
based on the original state and do not inject interrupts or NMIs if
guest interruptibility was blocked.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.
To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.
The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.
Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
VMX differentiates between processor and software generated exceptions
when injecting them into the guest. Extend vmx_queue_exception
accordingly (and refactor related constants) so that we can use this
service reliably for the new guest debugging framework.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Userspace has to tell the kernel module somehow that nested SVM should be used.
The easiest way that doesn't break anything I could think of is to implement
if (cpuid & svm)
allow write to efer
else
deny write to efer
Old userspaces mask the SVM capability bit, so they don't break.
In order to find out that the SVM capability is set, I had to split the
kvm_emulate_cpuid into a finding and an emulating part.
(introduced in v6)
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Normally setting the SVME bit in EFER is not allowed, as we did
not support SVM. Not since we do, we should also allow enabling
SVM mode.
v2 comes as last patch, so we don't enable half-ready code
v4 introduces a module option to enable SVM
v6 warns that nesting is enabled
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
KVM tries to read the VM_CR MSR to find out if SVM was disabled by
the BIOS. So implement read support for this MSR to make nested
SVM running.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This adds the #VMEXIT intercept, so we return to the level 1 guest
when something happens in the level 2 guest that should return to
the level 1 guest.
v2 implements HIF handling and cleans up exception interception
v3 adds support for V_INTR_MASKING_MASK
v4 uses the host page hsave
v5 removes IOPM merging code
v6 moves mmu code out of the atomic section
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch implements VMRUN. VMRUN enters a virtual CPU and runs that
in the same context as the normal guest CPU would run.
So basically it is implemented the same way, a normal CPU would do it.
We also prepare all intercepts that get OR'ed with the original
intercepts, as we do not allow a level 2 guest to be intercepted less
than the first level guest.
v2 implements the following improvements:
- fixes the CPL check
- does not allocate iopm when not used
- remembers the host's IF in the HIF bit in the hflags
v3:
- make use of the new permission checking
- add support for V_INTR_MASKING_MASK
v4:
- use host page backed hsave
v5:
- remove IOPM merging code
v6:
- save cr4 so PAE l1 guests work
v7:
- return 0 on vmrun so we check the MSRs too
- fix MSR check to use the correct variable
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This implements the VMLOAD and VMSAVE instructions, that usually surround
the VMRUN instructions. Both instructions load / restore the same elements,
so we only need to implement them once.
v2 fixes CPL checking and replaces memcpy by assignments
v3 makes use of the new permission checking
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Implement the hsave MSR, that gives the VCPU a GPA to save the
old guest state in.
v2 allows userspace to save/restore hsave
v4 dummys out the hsave MSR, so we use a host page
v6 remembers the guest's hsave and exports the MSR
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch implements the GIF flag and the clgi and stgi instructions that
set this flag. Only if the flag is set (default), interrupts can be received by
the CPU.
To keep the information about that somewhere, this patch adds a new hidden
flags vector. that is used to store information that does not go into the
vmcb, but is SVM specific.
I tried to write some code to make -no-kvm-irqchip work too, but the first
level guest won't even boot with that atm, so I ditched it.
v2 moves the hflags to x86 generic code
v3 makes use of the new permission helper
v6 only enables interrupt_window if GIF=1
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
These are helpers for the nested SVM implementation.
- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory
v3 makes use of the new permission checker
v6 changes:
- streamline nsvm_debug()
- remove printk(KERN_ERR)
- SVME check before CPL check
- give GP error code
- use new EFER constant
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM
specific headers. Linux does have nice header files to collect
EFER bits and MSR IDs, so IMHO we should put them there.
While at it, I also changed the naming scheme to match that
of the other defines.
(introduced in v6)
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
