aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-05-29[ALSA] Fix a typo in commentsTakashi Iwai
HDA generic driver Fix a typo in comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] prevent oops & dead keyboard on usb unplugging while the device is ↵Karsten Wiese
being used USB generic driver,USB USX2Y Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] trivial warning fix for emu10k1Jesper Juhl
EMU10K1/EMU10K2 driver When building with gcc -W sound/pci/emu10k1/emupcm.c produces this little warning in 2.6.12-rc2-mm3 : sound/pci/emu10k1/emupcm.c:265: warning: 'inline' is not at beginning of declaration No big deal, but trivial to fix. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add dxs_support=5 for Insight P4-ITXTakashi Iwai
VIA82xx driver Added dxs_support=5 entry for Insight P4-ITX. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Increase timer protocol numberTakashi Iwai
ALSA Core Increase the timer protocl number (to distinguish the fix for TREAD ioctls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Misc clean upTakashi Iwai
HDA Codec driver Misc clean up: move the definitions of constants for pinctl to a single place. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Remove dead codeTakashi Iwai
HDA Codec driver Removed the dead (duplicated) code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add AD1981HD and AD1983 supportTakashi Iwai
HDA Codec driver Added the support of AD1981HD and AD1983 codecs. Including the fix for AD1986A. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] add sigmatel codec supportMatt
HDA generic driver,HDA Codec driver Add initial SigmaTel codec support for 9200 and 922x. Note that this hda patch relies on the configuration default registers to be set correctly (normally by BIOS/firmware) in order for it to set up pin widgets properly. There's a test switch in the patch so it will work with the SigmaTel reference boards that are usually plugged into a system that doesn't set the configuration default registers. It supports 2 channel analog out and line/mic in. I plan to add >2 channel support and spdif support shortly. Please apply. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] hda: fix vref cap and ctl valuesMatt
HDA Codec driver,HDA generic driver Fix some vref defines so they are valid for the different bits in the pin cap and pin control registers. Please apply. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Improve the shared-jack handling on ac97Takashi Iwai
AC97 Codec The handling of shared surround/clfe output jacks with line/mic-in on some AC97 codecs is improved. Instead of 'Line-In As Surround' or 'Mic As Center/LFE' switch, two new enum controls are introduced: 'Channel Mode' and 'Surround Jack Mode'. The formar changes the current output mode among 2, 4 and 6-channels. The latter controls whether the jacks are shared or independent. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] replace SNDRV_PCM_HW_PARAMS_RUNTIME -> SNDRV_PCM_HW_PARAMS_NORESAMPLEJaroslav Kysela
ALSA Core Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] Fix capture on OSS emulationTakashi Iwai
ALSA<-OSS emulation Fix the noisy capture on some hardwares over OSS emulation. Change back to avail_min = period_size for capture direction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix permissions in some /proc filesTakashi Iwai
PCM Midlevel,CA0106 driver,EMU10K1/EMU10K2 driver Fix by Guillaume Chazarain <guichaz@yahoo.fr>: Some tunables in /proc have a write() function, but as their permission does not reflect it, it can be confusing to the user. So here is a patch that corrects the mode of those files. Note that I have only tested the 'xrun_debug' entry. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix compile warningTakashi Iwai
EMU10K1/EMU10K2 driver Fix compile warnings regarding the unused variables/functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Replace pci_module_init() with pci_register_driver()Takashi Iwai
Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver Replace the obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix SPDIF rate with dxs_support=4Takashi Iwai
VIA82xx driver Fix SPDIF rate setting with dxs_support=4. It should be 48k fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Support all sample rate conversion capabilities of DXS channelsSergey Vlasov
Documentation,VIA82xx driver Add support for full sample rate conversion capabilities of DXS channels present in VIA VT8233/5/7 controllers: - any sample rate in the 8000 ... 48000 Hz range is supported even if the AC'97 codec supports only 48000 Hz output; - different DXS channels can use different sample rates at the same time (the controller performs required sample rate conversion and mixing in hardware). Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add PCI ID for Gallant Odyssey Sound 4Sergey Vlasov
FM801 driver The Gallant Odyssey Sound 4 card is based on the ForteMedia FM801 chip, but has a different PCI ID. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] remove dead codeAdrian Bunk
YMFPCI driver This patch removes some dead code found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Provides preliminary support for the Terratec Phase 28 cardSimone Zinanni
ICE1712 driver Provides preliminary support for the Terratec Phase 28 card. Not extensively tested and probably buggy, but it seems to work. Signed-off-by: Simone Zinanni <simone@develer.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix typo in speaker routing. Now sound comes from the correct speakersJames Courtier-Dutton
EMU10K1/EMU10K2 driver when using the p16v HD device. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Improve playback startup. Increase buffer size, and reduce xruns.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Improve SPDIF playback via the P16V/CA0151 chip.James Courtier-Dutton
EMU10K1/EMU10K2 driver Although we can set 44100 as the output rate, the SPDIF can do it, but the Analog output cannot. The SPDIF has the bug, whereby the Left channel arrives one sample late, so although we don't do any resampling, it is not good for AC3 non-audio output. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Display SPDIF in status in proc fs 'spdif-in' file.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] choose multi-channel jacks automaticallyTakashi Iwai
HDA Codec driver Patch by C.L. Tien <cltien@cmedia.com.tw>: The patch makes cm9880 to choose multi-channel jacks automatically. 1. I found the current code has basic_init, which already includes necessary controls for 6-stack initialization, so I don't need another model. 2. I add a new model 'auto' to let the driver find a. if there are option real panel/front panel, b. the jacks to be used for multichannel. Because the jack color are based on MS's channel sequence, so the 'auto' model will pick the same jacks for multichannel MS uses. I did this to hope to minimize users questions. These code can also be applied to other codecs but I don't have any to test. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] virmidi - fix ioctl parameter passing when setting client nameClemens Ladisch
ALSA sequencer The last change to reduce stack usage did not adjust the parameter to SNDRV_SEQ_IOCTL_SET_CLIENT_IOCTL which resulted in passing the address of the pointer instead of the structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] MC97 registers resetSasha Khapyorsky
AC97 Codec Separated ac97 registers reset for audio and modem (or both) as recommended in AC97 spec. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix MC97 codec initializationSasha Khapyorsky
AC97 Codec This (especially 12000 -> 8000 sample rate replace) fix popular 'MC97 converters.. not ready' error with modem codecs initializations. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix 'semaphore is not ready' problem with snd-intel8x0mSasha Khapyorsky
Intel8x0-modem driver With some intel based ac97 modems codec access semaphore is not cleared after 0x54 AC97 register (GPIO_STATUS) reads. This may causes problems with newly applied modem mixer (Off-hook switch) and in other cases. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add CM9780 support, fix CM9761 SPDIFTakashi Iwai
AC97 Codec - Added CM9780 patch - Fix the SPDIF support on CM9761/CM9780 - Allow the generic enum callback to pass any number (not power of 2) as the value mask Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Remove unused variablesTakashi Iwai
AC97 Codec Removed unused variables (the old control definitions). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Check revision for the proper detection of audigy 2Takashi Iwai
EMU10K1/EMU10K2 driver Check ther revision to detect non-listed audigy 2 boards. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] usb-audio - BOSS GS-10 PCM supportClemens Ladisch
USB generic driver This patch adds quirks to support 24-bit PCM I/O in the 'Advanced Driver' mode of the BOSS GS-10. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] virmidi - fix ioctl parameter passing when creating seq portClemens Ladisch
ALSA sequencer The last change to reduce stack usage did not adjust the parameter to SNDRV_SEQ_IOCTL_CREATE_PORT which resulted in passing the address of the pointer instead of the structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] timer - added tread semaphoreJaroslav Kysela
Timer Midlevel Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] Add mixer map for Sound Blaster MP3+Takashi Iwai
USB generic driver Added the mixer mapping for Sound Blaster MP3+ by Pavel Mihaylov <bin@bash.info> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Audigy SB0090 identificationPeter Zubaj
EMU10K1/EMU10K2 driver This add identification of Audigy 1 model SB0090 and fixes problems with ac97 codec (mic not working). Signed-off-by: Peter Zubaj <pzad@pobox.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] usb-audio - allow USB MIDI quirks to specify endpoints explicitlyClemens Ladisch
USB generic driver This patch reintroduces the check for endpoint numbers that are specified explicitly in the quirk structure. This check was accidentally dropped in the last rewrite of snd_usbmidi_detect_endpoints(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] Fix the default id of multiple cardsTakashi Iwai
EMU10K1/EMU10K2 driver Fixed the default id string in case identical multiple cards exist. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Use old default id strings for compatibilityTakashi Iwai
EMU10K1/EMU10K2 driver Use expliciitly the old default id strings for backward compatibility. This will make 'alsactl restore' working again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] some docs for the new emu10k1 multichannel functionalityLee Revell
Documentation Not complete, or even spell checked, but in case I don't get a chance to work on it again before 1.0.9, here is what i have so far. It should go in alsa-kernel/Documentation/emu10k1-jack.txt. Signed-off-by: Lee Revell <rlrevell@joe-job.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] clean up card featuresLee Revell
EMU10K1/EMU10K2 driver This patch converts the emu10k1 driver to use the card capabilities structure for some more things. Not extensively tested but seems to work. Signed-off-by: Lee Revell <rlrevell@joe-job.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix memory leakTakashi Iwai
ALSA sequencer Fixed memory leak by the last change of stack reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Fix the detection of resolution of ac97 controlsTakashi Iwai
AC97 Codec Fixed the detection of bit resolution of ac97 mixer controls. This will fix the problem with TI ac97 codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Added identification for the Audigy ES.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Add's identification of the SB Live! Platinum [CT4760P]James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Adds Capture to P16V chip.James Courtier-Dutton
EMU10K1/EMU10K2 driver One can select which capture source, but one cannot yet set volumes. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] fix multi-channel for model==fullChenLi Tien
HDA Codec driver The patch_cm9880.c can't play side/C/B channels from front panel jacks. I fixed it by adding select pin. Signed-off-by: ChenLi Tien <cltien@cmedia.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Skip ac97 SPDIF controlsTakashi Iwai
CA0106 driver Skip building ac97 SPDIF controls via AC97_SCAP_NO_SPDIF. Clean up the code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 20:37:58 +0000