aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-07-13[IA64] Make PCDP work again.David Mosberger-Tang
Mark's patch added "attribute((packed))" for pcdp_uart, without accounting for the fact that the structure definition _relied_ on implicit padding by 6 bytes. Fix is to make the padding explicit. Signed-off-by: David Mosberger-Tang <David.Mosberger@acm.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-13[IA64] fix call of smp_processor_id() by XPC whileDean Nelson
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch replaces the two calls to smp_processor_id() by a single call to raw_smp_processor_id() since any CPU within the partition will do. Signed-off-by: Dean Nelson <dcn@sgi.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] Altix pcibus_to_node implementationChristoph Lameter
The Altix subarch does not provide node information via ACPI. Instead hooks are used to fixup pci structures. This patch determines the nodes for Altix PCI busses. Remote Bridges: --------------- Altix supports remote I/O nodes without memory or processors but with bridges. The TIOCA type of bridge is an AGP bridge and the PROM provides information about the closest node. That information will be returned by pcibus_to_node. The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a closest node id. pcibus_to_node will return -1 for devices on those bridges meaning that device control structures may be allocated on any node. Safeguard: ---------- Should the fixups result in invalid node information for a pci controller then a warning will be printed and pcibus_to_node will return -1. This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that dma_alloc_coherent will now use alloc_pages_node to allocate memory local to the node that the PCI device is connected to. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] improve flush_icache_range()Zoltan Menyhart
Check with PAL to see what the i-cache line size is for each level of the cache, and so use the correct stride when flushing the cache. Acked-by: David Mosberger Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] remove CONFIG_IA64_SGI_SN_SIMGreg Edwards
This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing any kernel bootable on sn2 to also be booted in the simulator. Boot tested on Altix and HP rx2600. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] pcibus_to_node implementation for IA64Christoph Lameter
pcibus_to_node provides a way for the Linux kernel to identify to which node a certain pcibus connects to. Allocations of control structures for devices can then be made on the node where the pci bus is located to allow local access during interrupt and other device manipulation. This patch provides a new "node" field in the the pci_controller structure. The node field will be set based on ACPI information (thanks to Alex Williamson <alex.williamson@hp.com for that piece). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11Merge master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds
2005-07-11[IA64] assign_irq_vector() should not panicKenji Kaneshige
Current assign_irq_vector() will panic if interrupt vectors is running out. But I think how to handle the case of lack of interrupt vectors should be handled by the caller of this function. For example, some PCI devices can raise the interrupt signal via both MSI and I/O APIC. So even if the driver for these device fails to allocate a vector for MSI, the driver still has a chance to use I/O APIC based interrupt. But currently there is no chance for these driver to use I/O APIC based interrupt because kernel will panic when assign_irq_vector() fails to allocate interrupt vector. The following patch changes assign_irq_vector() for ia64 to return -ENOSPC on error instead of panic (as i386 and x86_64 versions do). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11[IA64] use msleep_interruptible() instead of schedule_timeoutNishanth Aravamudan
Description: Replace schedule_timeout() with msleep_interruptible() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11[PATCH] v850: Update mmu.h header to match implementation changesMiles Bader
Signed-off-by: Miles Bader <miles@gnu.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11[PATCH] v850: Update checksum.h to match changed function signaturesMiles Bader
Signed-off-by: Miles Bader <miles@gnu.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6Linus Torvalds
2005-07-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-07-11[IA64] remove linux/version.h include from arch/ia64Olaf Hering
changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11Auto merge with /home/aegl/GIT/linusTony Luck
2005-07-10[SPARC64]: Add syscall auditing support.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10[SPARC64]: Pass regs and entry/exit boolean to syscall_trace()David S. Miller
Also fix a bug in 32-bit syscall tracing. We forgot to update this code when we moved over to the convention that all 32-bit syscall arguments are zero extended by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10[SPARC64]: Add SECCOMP support.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10[SPARC64]: Kill ancient and unused SYSCALL_TRACING debugging code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10[SPARC64]: Add __read_mostly support.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10[SPARC]: Add ioprio system call support.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-10Merge master.kernel.org:~rmk/linux-2.6-arm.gitLinus Torvalds
2005-07-10[PATCH] remove asm-xtensa/ipc.hStephen Rothwell
Now that sys_ipc has been removed from xtensa, asm/ipc.h is no longer needed for that architecture. Not tested, but obviously correct. This file is included only from arch code and this patch also removes the only inclusion. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-10[PATCH] Sync up ieee-1394Ben Collins
Lots of this patch is trivial code cleanups (static vars were being intialized to 0, etc). There's also some fixes for ISO transmits (max buffer handling). Aswell, we have a few fixes to disable IRM capabilites correctly. We've also disabled, by default some generally unused EXPORT symbols for the sake of cleanliness in the kernel. However, instead of removing them completely, we felt it necessary to have a config option that allowed them to be enabled for the many projects outside of the main kernel tree that use our API for driver development. The primary reason for this patch is to revert a MODE6->MODE10 RBC conversion patch from the SCSI maintainers. The new conversions handled directly in the scsi layer do not seem to work for SBP2. This patch reverts to our old working code so that users can enjoy using Firewire disks and dvd drives again. We are working with the SCSI maintainers to resolve this issue outside of the main kernel tree. We'll merge the patch once the SCSI layer's handling of the MODE10 conversion is working for us. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-10[PATCH] ARM: 2803/1: OMAP update 11/11: Add cpufreq supportTony Lindgren
Patch from Tony Lindgren This patch adds minimal cpufreq support for OMAP taking advantage of the clock framework. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2805/1: OMAP update 10/11: Update H2 defconfigTony Lindgren
Patch from Tony Lindgren This patch updates H2 defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific arch files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2802/1: OMAP update 8/11: Update OMAP arch filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific arch files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omapTony Lindgren
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2809/1: OMAP update 7b/11: Move arch-omap to plat-omapTony Lindgren
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2807/1: OMAP update 7a/11: Move arch-omap to plat-omapTony Lindgren
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2801/1: OMAP update 6/11: Split OMAP1 common code into id, io ↵Tony Lindgren
and serial Patch from Tony Lindgren This patch by Juha Yrjölä and other OMAP developers splits OMAP1 specific common code into OMAP1 id, io, and serial code in mach-omap1 directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 ↵Tony Lindgren
directory Patch from Tony Lindgren This patch by Paul Mundt and other OMAP developers moves OMAP1 board files into mach-omap1 directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 ↵Tony Lindgren
directory Patch from Tony Lindgren This patch by Paul Mundt and other OMAP developers moves OMAP1 specific LED code into mach-omap1 directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2800/1: OMAP update 3/11: Move OMAP1 core code into mach-omap1 ↵Tony Lindgren
directory Patch from Tony Lindgren This patch by Paul Mundt and other OMAP developers moves OMAP1 specific IRQ, time, and FPGA code into mach-omap1 directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 ↵Tony Lindgren
and omap2 Patch from Tony Lindgren This patch by Paul Mundt and other OMAP developers modifies ARM specific Kconfig to allow sharing code between OMAP1 and OMAP2 architectures. In order to share code between OMAP1 and OMAP2, all OMAP1 specific code is moved into mach-omap1 directory in the following patch. A new mach-omap2 directory will be added later on. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2797/1: OMAP update 1/11: Update include filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific include files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2796/1: Fix ARMv5[TEJ] check in MMU initalizationDeepak Saxena
Patch from Deepak Saxena The code in mm-armv.c checks for the condition (cpu_architecture()<= ARMv5) in a few places but should be checking for ARMv5TEJ as the MMU is shared across all v5 variations. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2795/1: update ixp2000 defconfigsLennert Buytenhek
Patch from Lennert Buytenhek Update the ixp2000 defconfigs from 2.6.12-git6 to 2.6.13-rc2. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2793/1: platform serial support for ixp2000Lennert Buytenhek
Patch from Lennert Buytenhek This patch converts the ixp2000 serial port over to a platform serial device. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10drm: fix stupid missing semicolon.Dave Airlie
I fixed this in one git tree but that wasn't the one I pushed... Signed-off-by: Dave Airlie <airlied@linux.ie>
2005-07-09Merge head 'drm-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
2005-07-09Merge head 'drm-3264' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
2005-07-09Merge head 'drm-via' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
2005-07-09Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-07-08[SCTP]: Use struct list_head for chunk lists, not sk_buff_head.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV6]: Fix warning in ip6_mc_msfilter.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV4]: fix IPv4 leave-group group matchingDavid L Stevens
This patch fixes the multicast group matching for IP_DROP_MEMBERSHIP, similar to the IP_ADD_MEMBERSHIP fix in a prior patch. Groups are identifiedby <group address,interface> and including the interface address in the match will fail if a leave-group is done by address when the join was done by index, or if different addresses on the same interface are used in the join and leave. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV4]: (INCLUDE,empty)/leave-group equivalence for full-state MSF APIs & ↵David L Stevens
errno fix 1) Adds (INCLUDE, empty)/leave-group equivalence to the full-state multicast source filter APIs (IPv4 and IPv6) 2) Fixes an incorrect errno in the IPv6 leave-group (ENOENT should be EADDRNOTAVAIL) Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV4]: multicast API "join" issuesDavid L Stevens
1) In the full-state API when imsf_numsrc == 0 errno should be "0", but returns EADDRNOTAVAIL 2) An illegal filter mode change errno should be EINVAL, but returns EADDRNOTAVAIL 3) Trying to do an any-source option without IP_ADD_MEMBERSHIP errno should be EINVAL, but returns EADDRNOTAVAIL 4) Adds comments for the less obvious error return values Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 19:40:26 +0000