aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-18ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels"Rabin Vincent
This reverts commit 14f0aa359365e8a93a77b71e3b840274b9b4dcb1. That commit was needed earlier because system call restarting for OABI (compat) required an executable stack and thus had problems with NX. Since ab72b00734ae4d0b ("ARM: Fix signal restart issues with NX and OABI compat") has reworked the code to not require an executable stack anymore, we can re-enable NX support for kernels with OABI (compat) support. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-01-18ALSA: Remove warning message for invalid OSS minor rangesTakashi Iwai
When a card instance with a higher card number is registered, warning messages are spewed eventually with stack traces due to the invalid minor number for OSS device registration. For example, thinkpad-acpi registers the card number 29 as default, and you'll see always these messages. This is rather confusing (and worries users), thus better to return simply the error code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-18ARM: 5882/1: ARM: Fix uncompress code compile for different defines of ↵Tony Lindgren
flush(void) Because of the include of the decompress_inflate.c file from boot/compress/misc.c, there are different flush() defines: In file included from arch/arm/boot/compressed/misc.c:249: arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0 Fix this by removing the define of flush() in misc.c for CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h, and that is being included unconditionally. Also use a static inline function instead of define for mach-mxc and mach-gemini to avoid similar bug for those platforms. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18sh: ms7724: Correct sh-eth EEPROM polling timeout.Kuninori Morimoto
This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18mfd: Unlock mc13783 before subsystems initialisation, at probe time.Alberto Panizzo
With this, mc13783 subsystems drivers can configure the mc13783 chip reading and writing registers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: WM835x GPIO direction register is not lockedMark Brown
No need to set the security key when writing to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: tmio_mmc hardware abstraction for CNF areaIan Molton
This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: WM8350 off by one bugDan Carpenter
If irq == WM8350_NUM_IRQ that would put us past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: Correct WM835x ISINK ramp time definesMark Brown
The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-17Btrfs: fix possible panic on unmountJosef Bacik
We can race with the unmount of an fs and the stopping of a kthread where we will free the block group before we're done using it. The reason for this is because we do not hold a reference on the block group while its caching, since the allocator drops its reference once it exits or moves on to the next block group. This patch fixes the problem by taking a reference to the block group before we start caching and dropping it when we're done to make sure all accesses to the block group are safe. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Btrfs: deal with NULL acl sent to btrfs_set_aclChris Mason
It is legal for btrfs_set_acl to be sent a NULL acl. This makes sure we don't dereference it. A similar patch was sent by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Btrfs: fix regression in orphan cleanupJosef Bacik
Currently orphan cleanup only ever gets triggered if we cross subvolumes during a lookup, which means that if we just mount a plain jane fs that has orphans in it, they will never get cleaned up. This results in panic's like these http://www.kerneloops.org/oops.php?number=1109085 where adding an orphan entry results in -EEXIST being returned and we panic. In order to fix this, we check to see on lookup if our root has had the orphan cleanup done, and if not go ahead and do it. This is easily reproduceable by running this testcase #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <string.h> #include <unistd.h> #include <stdio.h> int main(int argc, char **argv) { char data[4096]; char newdata[4096]; int fd1, fd2; memset(data, 'a', 4096); memset(newdata, 'b', 4096); while (1) { int i; fd1 = creat("file1", 0666); if (fd1 < 0) break; for (i = 0; i < 512; i++) write(fd1, data, 4096); fsync(fd1); close(fd1); fd2 = creat("file2", 0666); if (fd2 < 0) break; ftruncate(fd2, 4096 * 512); for (i = 0; i < 512; i++) write(fd2, newdata, 4096); close(fd2); i = rename("file2", "file1"); unlink("file1"); } return 0; } and then pulling the power on the box, and then trying to run that test again when the box comes back up. I've tested this locally and it fixes the problem. Thanks to Tomas Carnecky for helping me track this down initially. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Btrfs: Fix race in btrfs_mark_extent_writtenYan, Zheng
Fix bug reported by Johannes Hirte. The reason of that bug is btrfs_del_items is called after btrfs_duplicate_item and btrfs_del_items triggers tree balance. The fix is check that case and call btrfs_search_slot when needed. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Btrfs, fix memory leaks in error pathsJiri Slaby
Stanse found 2 memory leaks in relocate_block_group and __btrfs_map_block. cluster and multi are not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: linux-btrfs@vger.kernel.org Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Btrfs: align offsets for btrfs_ordered_update_i_sizeYan, Zheng
Some callers of btrfs_ordered_update_i_size can now pass in a NULL for the ordered extent to update against. This makes sure we properly align the offset they pass in when deciding how much to bump the on disk i_size. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17btrfs: fix missing last-entry in readdir(3)Jan Engelhardt
parent 49313cdac7b34c9f7ecbb1780cfc648b1c082cd7 (v2.6.32-1-g49313cd) commit ff48c08e1c05c67e8348ab6f8a24de8034e0e34d Author: Jan Engelhardt <jengelh@medozas.de> Date: Wed Dec 9 22:57:36 2009 +0100 Btrfs: fix missing last-entry in readdir(3) When one does a 32-bit readdir(3), the last entry of a directory is missing. This is however not due to passing a large value to filldir, but it seems to have to do with glibc doing telldir or something quirky. In any case, this patch fixes it in practice. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: do_add_mount() should sanitize mnt_flags CIFS shouldn't make mountpoints shrinkable mnt_flags fixes in do_remount() attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared() may_umount() needs namespace_sem Fix configfs leak Fix the -ESTALE handling in do_filp_open() ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path Fix ACC_MODE() for real Unrot uml mconsole a bit hppfs: handle ->put_link() Kill 9p readlink() fix autofs/afs/etc. magic mountpoint breakage
2010-01-17modpost: fix segfault in sym_is() with prefixed archesMike Frysinger
The sym_is() compares a symbol in an attempt to automatically skip symbol prefixes. It does this first by searching the real symbol with the normal unprefixed symbol. But then it uses the length of the original symbol to check the end of the substring instead of the length of the symbol it is looking for. On non-prefixed arches, this is effectively the same thing, so there is no problem. On prefixed-arches, since this is exceeds by just one byte, a crash is rare and it is usually a NUL byte anyways. But every once in a blue moon, you get the right page alignment and it segfaults. For example, on the Blackfin arch, sym_is() will be called with the real symbol "___mod_usb_device_table" as "symbol" when looking for the normal symbol "__mod_usb_device_table" as "name". The substring will thus return one byte into "symbol" and store it into "match". But then "match" will be indexed with the length of "symbol" instead of "name" and so we will exceed the storage. i.e. the code ends up doing: char foo[] = "abc"; return foo[strlen(foo)+1] == '\0'; Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-17ARM: fix badly placed mach/plat entries in Kconfig & MakefileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-17V4L/DVB (13851): Fix Input dependency for MantisManu Abraham
> > > > CONFIG_INPUT=n As reported by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_input_register" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_init" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_free_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_allocate_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! Signed-off-by: Manu Abraham <manu@linuxtv.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB(13824a): mantis: Fix __devexit bad annotationsMauro Carvalho Chehab
WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x13d7): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x1433): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x185e): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x18ba): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x68b8): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6914): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d3f): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d9b): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14634): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14690): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14abb): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14b17): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32)Mauro Carvalho Chehab
drivers/media/dvb/mantis/mantis_pci.c: In function ‘mantis_pci_init’: drivers/media/dvb/mantis/mantis_pci.c:76: warning: ‘DMA_nnBIT_MASK’ is deprecated Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cardsManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister ↵Mauro Carvalho Chehab
functions Fix a merge conflict between mantis and IR cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13812): [Mantis/Hopper] Update Copyright headerManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13811): [MB86A16] Update Copyright headerManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13810): [MB86A16] Use DVB_* macrosManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13809): Fix Checkpatch violationsManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13807): Fix: Free device in the device registration failure caseManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13806): Register and Initialize Remote controlManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13805): Fix: Unregister the frontend before detachingManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13804): Remove unused I2C Adapter IDManu Abraham
Signed-off-by: <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13803): Remove unused dependency on CU1216Manu Abraham
Thanks to Matthias Wachter <mathias@waechter.wiz.at> for pointing it out. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13802): [Mantis/Hopper] Fix all build related warningsManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13801): [MB86A16] Use the search callbackManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser ↵Manu Abraham
than 1mS. Do not wait, keep looping instead. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13799): [Mantis] Unregister frontendManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on ↵Manu Abraham
relevant devices Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul,Manu Abraham
* Initial go at VP-3028, VP-3030 devices. * I2C communication improvements, * Add TDA665x support Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13796): [Mantis] Add missing file in previous commitManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the ↵Manu Abraham
PCI ID list Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13794): [Mantis/VP-3028] Initial go at Serial interface ↵Manu Abraham
implementation, add support for VP-3028 Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13792): [Mantis/VP-2033] Do not claim TDA10023Niklas Edmundsson
Do not rely on the PCI ID alone Signed-off-by: Niklas Edmundsson <nikke@acc.umu.se> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13791): [TDA10021] Do not claim TDA10023Niklas Edmundsson
Signed-off-by: Niklas Edmundsson <nikke@acc.umu.se> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13790): [Mantis] Relocate queue initializationManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13789): [Mantis CA] Initialize the mutexManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13788): [Mantis CA] use a lock for the relevant CI Read/Write ↵Manu Abraham
operations Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13787): [Mantis] Fix buildManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17V4L/DVB (13786): [Mantis] Bug: HIF bits already shifted ..Manu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 04:05:30 +0000