aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-26davinci: dm646x: Add IDE setupHemant Pedanekar
This patch adds platform data and init function for IDE which could be called from board specific file to register IDE device. Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4, while for 729MHz device, it is UDMA5. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: make arch_idle and arch_reset as inline functionsSekhar Nori
Make arch_idle and arch_reset inline as inline function. Not having them inline leads to a warning of this sort when only one of these functions is used: arch/arm/mach-davinci/include/mach/system.h:24: warning: 'arch_reset' \ defined but not used boot, re-boot tested on OMAP-L138 EVM Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: da830: updates for mach-type name changeKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Move IO device mapping macros from io.h to hardware.hHemant Pedanekar
This patch takes out IO mapping macros from mach/io.h and puts them in mach/hardware.h avoiding need to include mach/io.h in various files such as serial.h, vmalloc.h etc. The main reason to avoid inclusion of mach/io.h is, when default in/out macros are overridden by machine specific functions (e.g., in case of PCI I/O), they result into linker error. An example snippet and error snapshot is listed below. Following code in mach/io.h: #define inl(p) my_inl() static inline unsigned int my_inl(unsigned int addr) { if (IS_PCI_IO(addr)) return pci_inl (); else return le32_to_cpu(__raw_readl(__typesafe_io(addr))); } leads to error: LD arch/arm/boot/compressed/vmlinux arch/arm/boot/compressed/misc.o: In function `my_inl': misc.c:(.text+0x2744): undefined reference to `pci_inl' make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 This is because mach/io.h gets included in arch/arm/boot/compressed/misc.c through mach/serial.h but pci.c file, which defines 'pci_inl' doesn't get built into compressed vmlinux. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm646x: Add clock info and update mux setup for ATAHemant Pedanekar
This patch adds clock data for IDE and also updates pin mux mask for ATA so as to disable PCI when ATA is selected. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Kconfig: update default config for 2.6.31-rcKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: ASoC: Add the platform devices for ASPChaithrika U S
1) Registers the platform devices for ASP on dm355, dm644x and dm646x so that the machine driver can probe to get ASP related platform data. 2) Move towards definition of the asp clocks using physical name(for dm355 and dm644x) 3) Add platform data to board specific files. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365 gpio irq supportDavid Brownell
Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs: - Flag DM365 chips as using non-banked GPIO interrupts, using a new soc_info field. - Replace the gpio_to_irq() mapping logic. This now uses some runtime infrastructure, keyed off that new soc_info field, which doesn't handle irq_to_gpio(). - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC still need edge triggering managed by the GPIO controller. DM365 chips no longer falsely report 104 GPIO IRQs as they boot. Intelligence about IRQ muxing is missing, so for the moment this only exposes the first eight DM365 GPIOs, which are never muxed. The next eight are muxed, half with Ethernet (which uses most of those pins anyway). Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also on DM365 (16 unbanked ones, only 8 made available). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: DM365 Updating PINMUX EntriesSandeep Paulraj
Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4, PWM 0 - 3. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: da8xx: Add support for DA830/OMAP-L137 EVM boardMark A. Greer
Add support for the DA830/OMAP-L137 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) and Audio cards that can be connected which contain various devices. Support for those devices and ones on the EVM will be added in subsequent patches. Additional generalizations for future SoCs in da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: da8xx: Add base DA830/OMAP-L137 SoC supportMark A. Greer
The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365 evm cpld support: leds, card detect, other setupDavid Brownell
Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365: add NAND support to EVM boardSandeep Paulraj
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: MMC/SD Support for dm365 EVMSandeep Paulraj
Patch adds support for MMC/SD in the DM365 EVM. Pinmux for MMC/SD slot 1 on the DM365 EVM is also configured. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365: add MMC/SD supportSandeep Paulraj
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365: add EDMA supportSandeep Paulraj
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365: EMAC support for SoC and dm365 EVMSandeep Paulraj
The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.Sandeep Paulraj
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Adding DM365 entries to Makefile/Kconfig/defconfigSandeep Paulraj
This patch does the following 1) Adds entries to davinci_all_defconfig for DM365 2) Adds entries to the Makefile for DM365 3) Adds entries for DM365 in the Kconfig Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Adding DM365 EVM board supportSandeep Paulraj
The patch adds support for Evaluation Module (EVM) board for the dm365 SoC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Adding DM365 SOC SupportSandeep Paulraj
The patch adds base support for new TI SOC DM365, which s similar to the dm355. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: remove watchdog from soc_infoKevin Hilman
watchdog info is not needed in soc_info, platform_device can be used directly in core code. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: sram warning fixDavid Brownell
CC arch/arm/mach-davinci/sram.o arch/arm/mach-davinci/sram.c: In function 'sram_init': arch/arm/mach-davinci/sram.c:63: warning: comparison of distinct pointer types lacks a cast Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Kconfig: enable EVMs by default when SoCs are enabledKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm644x: Support for dm644x silicon revision 2.1Rajashekhara, Sudhakar
JTAG ID for DM644x silicon revision 2.1 has changed. An entry for the new silicon revision needs to be added to the davinci_id structure. Without this addition, EVMs with new silicon revision fail to boot the kernel. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Fix watchdog reset codeDavid Griego
The davinci reset routine, davinci_watchdog_reset(), sets the TCR register instead of the TGCR register as it should to put the WDT into its "Initial State". It also writes the WDTCR register without the proper WDKEY which is pointless since the register will be write-protected. Signed-off-by: David Griego <dgriego@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: dm646x: Adds McASP clockChaithrika U S
Adds McASP clock support for the two instances of mcasp (mcasp0,mcasp1). This patch is part of the audio support for dm646x series. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: EDMA: add support for dm646xSudhakar Rajashekhara
Enables module clock for DM646x EDMA channel controller and transfer controller. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: EDMA: multiple CCs, channel mapping and API changesSudhakar Rajashekhara
- restructure to support multiple channel controllers by using additional struct resources for each CC - interface changes visible to EDMA clients Introduce macros to build IDs from controller and channel number, and to extract them. Modify the edma_alloc_slot function to take an extra argument for the controller. Also update ASoC drivers to use API. ASoC changes Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> - Move queue related mappings to dm<soc>.c EDMA in DM355 and DM644x has two transfer controllers while DM646x has four transfer controllers. Moving the queue to tc mapping and queue priority mapping to dm<soc>.c will be helpful to probe these mappings from platform device so that the machine_is_* testing will be avoided. - add channel mapping logic Channel mapping logic is introduced in dm646x EDMA. This implies that there is no fixed association for a channel number to a parameter entry number. In other words, using the DMA channel mapping registers (DCHMAPn), a PaRAM entry can be mapped to any channel. While in the case of dm644x and dm355 there is a fixed mapping between the EDMA channel and Param entry number. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26MAINTAINERS: add entry for TI DaVinci machine supportKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-21Linux 2.6.31-rc7Linus Torvalds
2009-08-21Re-introduce page mapping check in mark_buffer_dirty()Linus Torvalds
In commit a8e7d49aa7be728c4ae241a75a2a124cdcabc0c5 ("Fix race in create_empty_buffers() vs __set_page_dirty_buffers()"), I removed a test for a NULL page mapping unintentionally when some of the code inside __set_page_dirty() was moved to the callers. That removal generally didn't matter, since a filesystem would serialize truncation (which clears the page mapping) against writing (which marks the buffer dirty), so locking at a higher level (either per-page or an inode at a time) should mean that the buffer page would be stable. And indeed, nothing bad seemed to happen. Except it turns out that apparently reiserfs does something odd when under load and writing out the journal, and we have a number of bugzilla entries that look similar: http://bugzilla.kernel.org/show_bug.cgi?id=13556 http://bugzilla.kernel.org/show_bug.cgi?id=13756 http://bugzilla.kernel.org/show_bug.cgi?id=13876 and it looks like reiserfs depended on that check (the common theme seems to be "data=journal", and a journal writeback during a truncate). I suspect reiserfs should have some additional locking, but in the meantime this should get us back to the pre-2.6.29 behavior. Pattern-pointed-out-by: Roland Kletzing <devzero@web.de> Cc: stable@kernel.org (2.6.29 and 2.6.30) Cc: Jeff Mahoney <jeffm@suse.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: add GET_PARAM/INFO support for Z pipes drm/radeon/kms: add r100/r200 OQ support. drm: Fix sysfs device confusion. drm/radeon/kms: implement the bo busy ioctl properly.
2009-08-21Merge branch 'btrfs' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'btrfs' of git://git.kernel.dk/linux-2.6-block: btrfs: fix inode rbtree corruption
2009-08-21x86: don't call '->send_IPI_mask()' with an empty maskLinus Torvalds
As noted in 83d349f35e1ae72268c5104dbf9ab2ae635425d4 ("x86: don't send an IPI to the empty set of CPU's"), some APIC's will be very unhappy with an empty destination mask. That commit added a WARN_ON() for that case, and avoided the resulting problem, but didn't fix the underlying reason for why those empty mask cases happened. This fixes that, by checking the result of 'cpumask_andnot()' of the current CPU actually has any other CPU's left in the set of CPU's to be sent a TLB flush, and not calling down to the IPI code if the mask is empty. The reason this started happening at all is that we started passing just the CPU mask pointers around in commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), and when we did that, the cpumask was no longer thread-local. Before that commit, flush_tlb_mm() used to create it's own copy of 'mm->cpu_vm_mask' and pass that copy down to the low-level flush routines after having tested that it was not empty. But after changing it to just pass down the CPU mask pointer, the lower level TLB flush routines would now get a pointer to that 'mm->cpu_vm_mask', and that could still change - and become empty - after the test due to other CPU's having flushed their own TLB's. See http://bugzilla.kernel.org/show_bug.cgi?id=13933 for details. Tested-by: Thomas Björnell <thomas.bjornell@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21Make bitmask 'and' operators return a result codeLinus Torvalds
When 'and'ing two bitmasks (where 'andnot' is a variation on it), some cases want to know whether the result is the empty set or not. In particular, the TLB IPI sending code wants to do cpumask operations and determine if there are any CPU's left in the final set. So this just makes the bitmask (and cpumask) functions return a boolean for whether the result has any bits set. Cc: stable@kernel.org (2.6.30, needed by TLB shootdown fix) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21x86: don't send an IPI to the empty set of CPU'sLinus Torvalds
The default_send_IPI_mask_logical() function uses the "flat" APIC mode to send an IPI to a set of CPU's at once, but if that set happens to be empty, some older local APIC's will apparently be rather unhappy. So just warn if a caller gives us an empty mask, and ignore it. This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), documented here: http://bugzilla.kernel.org/show_bug.cgi?id=13933 which causes a silent lock-up. It only seems to happen on PPro, P2, P3 and Athlon XP cores. Most developers sadly (or not so sadly, if you're a developer..) have more modern CPU's. Also, on x86-64 we don't use the flat APIC mode, so it would never trigger there even if the APIC didn't like sending an empty IPI mask. Reported-by: Pavel Vilim <wylda@volny.cz> Reported-and-tested-by: Thomas Björnell <thomas.bjornell@gmail.com> Reported-and-tested-by: Martin Rogge <marogge@onlinehome.de> Cc: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21drm/radeon: add GET_PARAM/INFO support for Z pipesAlex Deucher
Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21btrfs: fix inode rbtree corruptionFrom: Nick Piggin
Node may not be inserted over existing node. This causes inode tree corruption and I was seeing crashes in inode_tree_del which I can not reproduce after this patch. The other way to fix this would be to tie inode lifetime in the rbtree with inode while not in freeing state. I had a look at this but it is not so trivial at this point. At least this patch gets things working again. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Acked-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-21drm/radeon/kms: add r100/r200 OQ support.Dave Airlie
This adds the relocation necessary for OQ support on the r100/r200 chipsets. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm: Fix sysfs device confusion.Thomas Hellstrom
The drm sysfs class suspend / resume methods could not distinguish between different device types wich could lead to illegal type casts. Use struct device_type and make sure the class suspend / resume callbacks are aware of those. There is no per device-type suspend / resume. Only new-style PM. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: implement the bo busy ioctl properly.Dave Airlie
The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge branch 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-stu300: I2C STU300 stability updates i2c-omap: Enable workaround for Errata 1.153 based on i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts i2c-omap: Fix I2C status ACK
2009-08-20i2c-stu300: I2C STU300 stability updatesLinus Walleij
- blk clk is enabled when an irq arrives. The clk should be enabled, but just to make sure. - All error bits are handled no matter state machine state - All irq's will run complete() except for irq's that wasn't an event. - No more looking into status registers just in case an interrupt has happend and the irq handle wasn't executed. - irq_disable/enable are now separete functions. - clk settings calculation changed to round upwards instead of downwards. - Number of address send attempts before giving up is increased to 12 from 10 since it most times take 8 tries before getting through. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Enable workaround for Errata 1.153 based onMoiz Sonasath
Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later version of I2C IP block. The errata impacts OMAP 2420|2430|3430, enable the workaround for these based on I2C IP block revision number instead of OMAP CPU type Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: ACK pending [R/X]DR and [R/X]RDY interruptsMoiz Sonasath
ACK any pending read/write interrupts before exiting the ISR either after completing the operation [ARDY interrupt] or in case of an error [NACK|AL interrupt] Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Fix I2C status ACKNishanth Menon
I2C status ack for [RX]RDR and [RX]RDY could cause race conditions of clearing the event twice and a violation of the programing sequence as defined in TRM This patch fixes the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec ALSA: hda: add model for Intel DG45ID/DG45FC boards ALSA: hda: enable speaker output for Compaq 6530s/6531s
2009-08-19ALSA: hda - Fix probe of Toshiba laptops with ALC268 codecTakashi Iwai
There are many variants of Toshiba laptops with ALC268 codec, and it seems that a few of them don't work with model=toshiba preset since they have the secondary ALC268 codec just for HDMI output. This is a regression due to the previous clean-up work to merge all Toshiba quirk entries into a single check. This patch adds the identification of such laptops to apply the standard BIOS-probing method. Unfortunately, Toshiba laptops have all the same PCI SSID, so we need to check the codec SSID to identify each device. Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix oopses with doubly mounted snapshots nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint()
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 19:26:49 +0000