aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-19USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is ↵spark
0xff Signed-off-by: spark <spark@bandrich.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: Fix module name typo for qcaux Kconfig entry.Stefan Schmidt
The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix deadlock between write and resumeOliver Neukum
The new runtime PM scheme allows resume() to have no locks. This fixes the deadlock. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix order in disconnect and fix lockingOliver Neukum
- as the callback can schedule work, URBs must be killed first - if the driver causes an autoresume, the caller must handle locking Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm:Fix loss of data due to autosuspendOliver Neukum
The guarding flag must be set and tested under spinlock and cleared before the URBs are resubmitted in resume. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix submission of URB after suspensionOliver Neukum
There's a window under which cdc-wdm may submit an URB to a device about to be suspended. This introduces a flag to prevent it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between disconnect and debug messagesOliver Neukum
dev_dbg() and dev_err() cannot be used to report failures that may have been caused by a device's removal Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between autosuspend and reading from the deviceOliver Neukum
While an available response is read the device must not be autosuspended. This requires a flag dedicated to that purpose. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between write and disconnectOliver Neukum
Unify mutexes to fix a race between write and disconnect and shift the test for disconnection to always report it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: core: declare mbase only where it's usedFelipe Balbi
... and avoid a compilation if we disable host side of musb. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: musb: fix warnings in Blackfin regsMike Frysinger
The recent commit "usb: musb: Add context save and restore support" added some stubs for the Blackfin code so things would compile, but it also added a bunch of warnings due to missing return statements. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: abstract out ULPI_BUSCONTROL register reads/writesMike Frysinger
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. However, it has no ULPI support - so there are no registers at all. That means accesses to ULPI_BUSCONTROL have to be abstracted away like other MUSB registers. This fixes building for Blackfin parts again. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: Fix compile error for omaps for musb_hdrcTony Lindgren
CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3. But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header. Otherwise we get the following for most omap3 defconfigs: drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while' Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb/gadget: fix compile error on r8a66597-udc.cGrant Likely
C file uses IS_ERR and PTR_ERR, but doesn't include <linux/err.h> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Fix documentation for avoid_reset_quirkOliver Neukum
The name used in the documentation doesn't match reality. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: option: add support for a new CMOTECH device to usb/serial/optionNathaniel McCallum
Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: option: move hardcoded PID to a macro in usb/serial/optionNathaniel McCallum
Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: option: fix incorrect manufacturer name in usb/serial/option: ↵Nathaniel McCallum
MAXON->CMOTECH Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: ftdi: add CONTEC vendor and product idDaniel Sangorrin
This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H [akpm@linux-foundation.org: keep the VIDs sorted a bit] Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Radek Liboska <liboska@uochb.cas.cz> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: xHCI: re-initialize cmd_completionAndiry Xu
When a signal interrupts a Configure Endpoint command, the cmd_completion used in xhci_configure_endpoint() is not re-initialized and the wait_for_completion_interruptible_timeout() will return failure. Initialize cmd_completion in xhci_configure_endpoint(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: xhci: rename driver to xhci_hcdAlex Chiang
Naming consistency with other USB HCDs. Signed-off-by: Alex Chiang <achiang@hp.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: musb: fix build error introduced by isoc changeSonic Zhang
The recent commit "usb: musb: Fix for isochronous IN transfer" (f82a689fa) seems to have been against an older kernel version. It uses the old style naming of variables. Unfortunately, this breaks building for most MUSB users out there since "bDesiredMode" has been renamed to "desired_mode". Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: qcserial: add new device idsBernhard Rosenkraenzer
This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: cdc-acm: Fix stupid NULL pointer in resume()Oliver Neukum
Stupid logic bug passing a just nulled pointer Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: EHCI: adjust ehci_iso_stream for changes in ehci_qhClemens Ladisch
The EHCI driver stores in usb_host_endpoint.hcpriv a pointer to either an ehci_qh or an ehci_iso_stream structure, and uses the contents of the hw_info1 field to distinguish the two cases. After ehci_qh was split into hw and sw parts, ehci_iso_stream must also be adjusted so that it again looks like an ehci_qh structure. This fixes a NULL pointer access in ehci_endpoint_disable() when it tries to access qh->hw->hw_info1. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: EHCI: fix ITD list orderClemens Ladisch
When isochronous URBs are shorter than one frame and when more than one ITD in a frame has been completed before the interrupt can be handled, scan_periodic() completes the URBs in the order in which they are found in the descriptor list. Therefore, the descriptor list must contain the ITDs in the correct order, i.e., a new ITD must be linked in after any previous ITDs of the same endpoint. This should fix garbled capture data in the USB audio drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Option: Add support for a variant of DLink DWM 652 U5Huang Ying
I found a DLink DWM 652 U5 USB 3G modem has product ID 0xce1e instead of orignal 0xce16. The new ID is added. And I found there are two entries for 0xce16, one has raw number, the other has symbol DLINK_PRODUCT_DWM_652_U5. This is fixed too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: unusual_devs.h: Fix capacity for SL11R-IDE 2.6cOndrej Zary
SL11R-IDE 2.6c (at least) reports wrong capacity (one sector more). Reading that last sector causes the device not to work anymore (and looks like HAL or something does that automatically after plugging in): sd 5:0:0:0: [sdc] Device not ready sd 5:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08 sd 5:0:0:0: [sdc] Sense Key : 0x2 [current] sd 5:0:0:0: [sdc] ASC=0x0 ASCQ=0x0 sd 5:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 04 a8 b5 70 00 00 01 00 Add unusual_devs entry to fix the capacity. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: use port endpoint size to determine if ep is availableJohan Hovold
It is possible to have a multi-port device with a port lacking an in or out bulk endpoint. Only checking for num_bulk_in or num_bulk_out is thus not sufficient to determine whether a specific port has an in or out bulk endpoint. This fixes potential null pointer dereferences in the generic open and write routines, as well as access to uninitialised fifo in write_room and chars_in_buffer. Also let write fail with ENODEV (instead of 0) on missing out endpoint (also on zero-length writes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: fix softint not being called on errorsJohan Hovold
Make sure usb_serial_port_softint is called on errors also when using multi urb writes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: fix error message on close in generic driverJohan Hovold
Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: fix usbfs regressionAlan Stern
This patch (as1352) fixes a bug in the way isochronous input data is returned to userspace for usbfs transfers. The entire buffer must be copied, not just the first actual_length bytes, because the individual packets will be discontiguous if any of them are short. Reported-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty_port,usb-console: Fix usb serial console open/close regressionJason Wessel
Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty: cpm_uart: use resource_size()Tobias Klauser
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty_buffer: Fix distinct type warningFang Wenqi
CC drivers/char/tty_buffer.o drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’: drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’: drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and tty_insert_flip_string_fixed_flag(). Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19hvc_console: Fix race between hvc_close and hvc_removeAmit Shah
Alan pointed out a race in the code where hvc_remove is invoked. The recent virtio_console work is the first user of hvc_remove(). Alan describes it thus: The hvc_console assumes that a close and remove call can't occur at the same time. In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous itself.... So this can happen hvc_close hvc_remove hung up ? - no lock tty = hp->tty unlock lock hp->tty = NULL unlock notify del kref_put the hvc struct close completes tty is destroyed tty_hangup dead tty tty->ops will be NULL NULL->... This patch adds some tty krefs and also converts to using tty_vhangup(). Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linuxppc-dev@ozlabs.org CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19uartlite: Fix build on sparc.David Miller
We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty: Take a 256 byte padding into account when buffering below sub-page unitsMel Gorman
The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require ↵Greg Kroah-Hartman
a VT_RELDISP ioctl call" This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f. Ari writes as the reason this should be reverted: The problems with this patch include: 1. There's at least one subtlety I overlooked - switching between X servers (i.e. from one X VT to another) still requires the cooperation of both X servers. I was assuming that KMS eliminated this. 2. It hasn't been tested at all (no X server patch exists which uses the new mode). As he was the original author of the patch, I'll revert it. Cc: Ari Entlich <atrigent@ccs.neu.edu> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver core: numa: fix BUILD_BUG_ON for node_read_distanceDavid Rientjes
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when the number of nodes printed will exceed the buffer length. Each node only needs four chars: three for distance (maximum distance is 255) and one for a seperating space or a trailing newline. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver-core: document ERR_PTR() return valuesJani Nikula
A number of functions in the driver core return ERR_PTR() values on error. Document this in the kernel-doc of the functions. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19kobject: documentation: Update to refer to kset-example.c.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysdev: the cpu probe/release attributes should be sysdev_class_attributesStephen Rothwell
This fixes these warnings: drivers/base/cpu.c:264: warning: initialization from incompatible pointer type drivers/base/cpu.c:265: warning: initialization from incompatible pointer type Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19kobject: documentation: Fix erroneous example in kobject doc.Robert P. J. Day
Replace uio_mem example for kobjects with uio_map, since the uio_mem struct no longer contains a kobject. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver-core: fix missing kernel-doc in firmware_classRandy Dunlap
Fix kernel-doc warning in firmware_class.c: Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19Driver core: Early platform kernel-doc updateMagnus Damm
This patch updates the kernel-doc notation for early platform functions. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in mlx4 codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in infiniband codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the infiniband code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in ipmi codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the ipmi code. Thanks to Eric Biederman and Yinghai Lu for the original versions of the patch, unfortunatly they did not submit them in a form they could be applied in. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: Initialised pci bus legacy_mem field before useMel Gorman
PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in pci_create_legacy_files(). The surprise is that machines boot at all and it would appear to affect current mainline as well. This patch fixes the problem. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 02:02:34 +0000