Age | Commit message (Collapse) | Author |
|
Added the dB scale information to mixart driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
When booting with line out or headphone plugged, you won't hear anything.
The problem is that after reset all channels are muted, but the actual
value of the gpio port doesn't exactly match the active_val settings as
expected by check_audio_gpio. For example, the line_mute port is set to
7, but check_audio_gpio would expect 0xd or 0xf, thus its return value
indicates that it is not active, even though it is. AFAICS only looking
at the low bit is enough to determine whether the port is active.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Cleanup whitespace.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Removed volatile from the position buffer pointer.
Also, use synchronize_irq() instead of unreliable msleep(1)
in the driver remove callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to each board support code of ice1724 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information for native digital volumes of ice1712 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- Clean up the code in AK4xxx-ADDA i2c code.
- Fix capture gain controls for AK5365
- Changed the static table for DAC/ADC mixer labels to use
structs
- Implemented TLV entries for each AK codec
The volumes in AK4524, AK4528 and AK5365 are corrected with
a table to be suitable for dB conversion.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the missing dB scale information for Mic volume
to vxpocket driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
There's at least one USB audio chipset out there which supports only one
non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other
patches for this card which are unsatisfactory because they attempt to
map this rate to 44.1k leading to sound distortion.
The patch below uses SNDRV_PCM_RATE_KNOT to properly support the
non-standard rates where they are available.
Signed-off-by: Luke Ross <luke@lukeross.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fix the bad sound quality on VIA EPIA system using VIA VT1617A
(ALSA bug#2381).
Signed-off-by: Andrey Liakhovets <liakh@dol.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the linear volume TLV entries for YMFPCI native volume controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the definition of linear volume TLV type.
Some DSP chips and codecs (e.g. AK codec) use linear volume control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch removes setting of incorrect stop_threshold value
inside the driver. After the change, playback through the OSS
layer works correctly.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch fixes time slot leak in the dbri driver.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch fixes sound recording after the driver convertion to
ring buffered version. It also contains small clean ups to the
driver.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Force to choose model=ref for some Dell laptops with STAC9200 codec
chip for fixing the silent mic recording problem (possibly due to
a BIOS bug). Reference: ALSA bug#2038
So far, applied to Inspiron 630m, Latitude D620 and 120L.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Retrun error to user TLV_READ ioctl if no TLV is defined.
(Until now, nothing was written and rerunred successfully.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fixed the errors at checking info.access field during user TLV_WRITE
call. It should have been zero-initialized.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to vxpocket and vx222 drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to pcxhr driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fix volume control for the AK4358 DAC.
The attenuation control registers of the AK4358 use only 7bit for the
volume, the msb is used to enable attenuation output. Without this
patch there are 256 volume levels the lower 128 of which are mute.
Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fixed the mic capture with generic parser of hda-codec driver
- Use VREF80 for mic pins if available
- Handle multiple inputs correctly on audio-input widget node.
Confirmed on a conexant codec chip.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch restores the Intel HDA Sigmatel codec pin configuration on
resume. Most of it is dedicated to saving the BIOS pin configuration
if necessary, so that even unrecognized chips can be resumed correctly.
Signed-off-by: Richard Fish <bigfish@asmallpond.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- AR11M and AR11S uses the same chip hence we claim to support the AR Series.
- Added commentary about STAC9225s which shares the same id as CXD9872RD.
- Added entry for 7662 but won't work automatically until pci_subdevice
is known.
- 'vaio' model now corresponds to CXD9872RD_VAIO for backward compat.
- Replaced STAC766x_VAIO with CXD9872RD_VAIO, STAC9872AK_VAIO, STAC9872K_VAIO
and CXD9872AKD_VAIO
- Added 'vaio-ar' model for potential future modifications.
Signed-off-by: Guillaume Munch <diabo@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
The attached patch will force building the S/PDIF controls on the PCU
SSID for Asus P5P800-VM motherboard, even if the AC97_EI_SPDIF bit is
not set.
Signed-off-by: Magnus Sandin <magnus@sandin.cx>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Patch enables the internal speaker on acer laptops with ALC883.
Signed-off-by: Vladimir Avdonin <vldmrrr@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to opl3sa2 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to ad1848 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to ad1816a driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to dummy driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to trident driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to fm801 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to cs4281 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the dB scale information to ak4531 codec driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the TLV support to VIA82xx driver for addition of
dB range information.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the TLV support to AC97 codec driver for addition of
dB range information.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Simple patch to enable Message Signalled Interrupts for the HDA Intel
audio controller. Tested with:
Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
MSI is better because it means audio doesn't end up sharing IRQ with USB.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch makes the needlessly global snd_emu10k1_resume() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds ALSA hardware constrains so stereo is possible
only with 16-bit format. It contains small cleanups to ring
buffered code as well.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
It is a complete rework of low level layer to work on ring
buffers for comands and data descriptors. This removes annoying
noise due to delay in data buffer switching.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
A simplified routines to link and unlink time slots.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
A proper way to set DBRI's burst size. The size must be set after
each chip reset.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
A general clean up and redudant code removal.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
The structure is in big part redudant.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Automatically switch to polling mode for CORB/RIRB communication
if the irq-driven mode seems not working well. If the polling
mode still doesn't work, switch to single_cmd mode as fallback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds full 5.1 audio support for Intel boards
with the SigmaTel 9227 codec chip (946, 963, 965 series).
Signed-off-by: Tobin Davis <tobinx.b.davis@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds missing device ids for Intel 945 motherboards.
Signed-off-by: Tobin Davis <tobinx.b.davis@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fixed the missing selection of CONFIG_VIDEO_DEV from SND_FM801_TEA575X.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch enables headphone output at initialization for Intel
945 based systems that don't have proper detection circuitry.
Signed-off-by: Tobin Davis <tobinx.b.davis@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds missing device ids for Intel 915 and D102GGC
motherboards.
Signed-off-by: Tobin Davis <tobinx.b.davis@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|