aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-27Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-27ALSA: ARM: add Raumfeld audio supportDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-27ASoC: AIC23: Fixing infinite loop in resume pathAnuj Aggarwal
This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-27ASoC: Revert missing reset_err in wm97*.cTakashi Iwai
The commit fe3e78e073d25308756f38019956061153267769 ASoC: Factor out snd_soc_init_card() removed the error paths that are still valid for wm97* codecs, causing the compile errors like sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined Revert the removed error path codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-26ASoC: tlv320dac33: Change RT wq to singlethread wqPeter Ujfalusi
RT workqueue is going away in the near future, replace it with singlethread wq for now, which is still supported. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25ASoC: Add BCLK calculation utility for TDM mode tooMark Brown
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25Merge branch 'twl4030-mfd' into for-2.6.33Mark Brown
2009-11-25mfd: twl4030: fix ELF section mismatch...Daniel J Blueman
Since twl4030_probe is only called from functions in the init ELF section, annotate it so. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-23Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-23ASoC: Fix suspend with active audio streamsMark Brown
When we get a stream suspend event force the power down since otherwise the stream would remain marked as active. In future we'll probably want to make this stream-specific and add an interface to make the power down of other widgets optional in order to support leaving bypass paths active while suspending the processor. Cc: stable@kernel.org Reported-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-20Merge branch 'ads117x' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.33
2009-11-19ASoC: Add support for IGEP v2Enric Balletbò i Serra
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19ASoC: DaVinci: use edma_pause, edma_resumeTroy Kisky
Use edma_pause and edma_resume to make missing dma_events less likely. This may not be needed, but it looks better. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19ASoC: DaVinci: pcm, fix underrun by using sramTroy Kisky
Fix underruns by using dma to copy 1st to sram in a ping/pong buffer style and then copying from the sram to the ASP. This also has the advantage of tolerating very long interrupt latency on dma completion. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19ASoC: DaVinci: pcm, rename variables in prep for ping/pongTroy Kisky
Rename variable master_lch to asp_channel Rename variable slave_lch to asp_link[0] Rename local variables: lch to link count to asp_count src to asp_src dst to asp_dst Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19ASoC: DaVinci: i2s, reduce underruns by combining into 1 elementTroy Kisky
Allow the left and right 16 bit samples to be shifted out as 1 32 bit sample. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-18ASoC: tlv320aic23 fix rate selectionTroy Kisky
Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: OMAP3 Pandora: update for TWL4030 codec changesGrazvydas Ignotas
A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: Modifying the license string GPLv2 for OMAP3 EVMAnuj Aggarwal
Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.33
2009-11-18ASoC: DaVinci: remove requirement that dma_params is 1st in structureTroy Kisky
Remove requirement that dma_params is 1st in the structures davinci_audio_dev and davinci_mcbsp_dev. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: Added the CPU driver for PCM controllersJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ARM: S3C64XX: Defined PCM controller platform devicesJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ARM: S3C64XX: Added platform data headerJassi Brar
Many SoCs have their I2S pins MUXed with other functions. So we need to pass a callback for driver to configure the pins appropriately. Hence, the need of platform data and this header. As and when needed new callbacks and structure pointers maybe added to this header. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ARM: S3C64XX: Define PCM Controller base registersJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: Rename 's3c24xx-pcm' driver to 's3c-dma'Jassi Brar
Making room for namespace for the PCM Controller driver the platform driver(s3c24xx-pcm) has been renamed to SoC agnostic name 's3c-dma'. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: Rename s3c24xx_pcm prefix to s3c_dmaJassi Brar
The s3c24xx_pcm prefix for the soc_platform is inappropriate when some Samsung SoCs have PCM controllers which will eventually have drivers and hence namespace ambiguities. To resolve naming ambiguities in future the following have been renamed in order 1) s3c24xx_pcm_dma_params -> s3c_dma_params 2) s3c24xx_pcm_preallocate_dma_buffer -> s3c_preallocate_dma_buffer 3) s3c24xx_pcm_dmamask -> s3c_dma_mask 4) s3c24xx_pcm_XXX -> s3c_dma_XXX Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-17ASoC: Use DMA_BIT_MASK(32) instead of deprecated DMA_32BIT_MASKMarin Mitov
Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ASoC: OMAP: enable Overo driver for CM-T35Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: Remove redundant snd_soc_dapm_new_widgets() callsMark Brown
The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: Add jack_status_check callback function for GPIO jacksJoonyoung Shim
The jack_status_check callback function is the interface to check the status of the jack. Some target provides the method to distinguish what is the jack inserted - headphone jack, microphone jack, tvout jack, etc, so we can implement it using the jack_status_check function. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: move setting ac97 platformdata earlier than ac97 read/writeBarry Song
While probing, AC97 codec drivers and soc-core generically execute the following sequence: snd_soc_new_ac97_codec -> snd_soc_new_pcms -> reset ac-link/read AC97 ID to detect ->... -> set platform_data to ac97 by soc-core commit 474828a40f6ddab6e2a3475a19c5c84aa3ec7d60 adds platform_data to snd_ac97 instance. But ac97 platform data hasn't given to snd_ac97 before actual ac97 operations. Then while ac97_read access platform_data of snd_ac97 for detecting, NULL pointer oops will fire. That means old platform_data patch doesn't work in real-life cases. This patch moves the operation of setting ac97 platform_data earlier than ac97 reading/writing operations. Then it makes platform_data of AC97 become practically useful. Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: Fixed arguments passed to SMDK64xx set_pllJassi Brar
Corrected the order of 'source' and 'pll_id' arguments. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12ASoC: Add bit clock rate calculator utility functionsMark Brown
Many devices need to calculate the bit clock rate desired to work out the clock configuration required for the device. Provide utility functions to do this using both hw_params structures and raw numbers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-10ASoC: mpc5200: remove duplicate identical IRQ handlerGrant Likely
The TX and RX irq handlers are identical. Merge them Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10ASoC: TWL4030: Do not modify the APLL_CTL registerPeter Ujfalusi
APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10Merge branch 'twl4030-mfd' into for-2.6.33Mark Brown
2009-11-10MFD: twl4030-codec: APLL_INFREQ handling in the MFD driverPeter Ujfalusi
Configure the APLL_INFREQ field in the APLL_CTL register based on the platform data. Provide also a function for childs to query the audio_mclk frequency. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10OMAP: Configure audio_mclk for twl4030-codec MFDPeter Ujfalusi
audio_mclk value is going to be handled by the twl4030-codec MFD driver, configure the correct value for boards, which is using the twl4030 audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10MFD: TWL4030: Add audio_mclk to the codec platform dataPeter Ujfalusi
Add audio_mclk to the platform data struct for the twl4030-codec MFD driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-10ASoC: omap-mcbsp - add support for upto 16 channels.Graeme Gregory
This patch increases the number of supported audio channels from 4 to 16 and has been sponsored by Shotspotter Inc. It also fixes a FSYNC rate calculation bug when McBSP is FSYNC master. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-09ASoC: Pandora: Pass SRG input clock frequency to the OMAP McBSP DAIJarkko Nikula
Upcoming change to omap-mcbsp.c require that machine drivers using OMAP as a DAI master to pass sample rate generator input clock frequency to the omap-mcbsp.c DAI driver. Pandora is using 256*Fs output from the TWL4030 codec as an input clock to the McBSP sample rate generator. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC/mpc5200: fix enable/disable of AC97 slotsGrant Likely
The MPC5200 AC97 driver is disabling the slots when a stop trigger is received, but not reenabling them if the stream is started again without processing the hw_params again. This patch fixes the problem by caching the slot enable bit settings calculated at hw_params time so that they can be reapplied every time the start trigger is received. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC/mpc5200: add to_psc_dma_stream() helperGrant Likely
Move the resolving of the psc_dma_stream pointer to a helper function to reduce duplicate code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC/mpc5200: Improve printk debug output for triggerGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC/mpc5200: get rid of the appl_ptr tracking nonsenseGrant Likely
Sound drivers PCM DMA is supposed to free-run until told to stop by the trigger callback. The current code tries to track appl_ptr, to avoid stale buffer data getting played out at the end of the data stream. Unfortunately it also results in race conditions which can cause the audio to stall. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC/mpc5200: Track DMA position by period number instead of bytesGrant Likely
All DMA blocks are lined up to period boundaries, but the DMA handling code tracks bytes instead. This patch reworks the code to track the period index into the DMA buffer instead of the physical address pointer. Doing so makes the code simpler and easier to understand. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-07ASoC: Remove dead code and labelsTakashi Iwai
Remove the dead code and labels "card_err" in the error paths of some codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-06Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:41:35 +0000