aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-08-30[ALSA] usb-audio: use vmalloc for the PCM bufferClemens Ladisch
USB generic driver With the double buffering, we no longer need contiguous memory for the PCM buffer, so we can use vmalloc() instead of the preallocation functions, and increase the maximum size to 256 KB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: use usb_buffer_alloc/freeClemens Ladisch
USB generic driver Use the USB buffer allocation functions to avoid repeated DMA mappings of our buffers, which are re-used quite a lot. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: properly lock hwptr_done accessesClemens Ladisch
USB generic driver Take the substream lock when reading hwptr_done to avoid a race condition with the updates in the URB callbacks. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: actually schedule playback URBs at frame boundariesClemens Ladisch
USB generic driver Change prepare_playback_urb() not to stop preparing packets before a frame boundary has been reached. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: double-buffer all playback dataClemens Ladisch
USB generic driver We always had to use double buffering when capturing, and when playback data for one URB crosses a buffer boundary. The latter would make hwptr updates less precise because the double-buffered data is read from the buffer much earlier than the other data is read by the host controller. Double-buffering all data allows to update hwptr immediately after the data was copied to the USB buffer(s), which has the additional benefit of avoiding the latency imposed by the host controller's delay of up to one frame when interrupting. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: optimize handling of capture URBsClemens Ladisch
USB generic driver When preparing capture URBs, we don't need to stop when we cross a period boundary because we now never handle more than one millisecond of data per URB anyway. When handling captured data, use an extra flag to call snd_pcm_period_elapsed() no more than once. This allows us to move the period boundary checking code before the copying of the data which avoids a second locking of the substream's lock. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] Add new card ID. Fixes ALSA bug #1297James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30[ALSA] Add new ID. Fixes ALSA bug #1298James Courtier-Dutton
CA0106 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30[ALSA] opl3sa2 - fixed typo in PnP BIOS IDs (YMF0021 -> YMH0021)Jaroslav Kysela
OPL3SA2 driver Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-08-30[ALSA] opl3sa2 driver - added support for PnP BIOS devicesJaroslav Kysela
OPL3SA2 driver The driver has been extended to support also PnP BIOS devices. The detection path is: 1) detect PnP BIOS devices 2) detect ISA PnP devices Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-08-30[ALSA] via82xx - Add DXS entry for MSI K8MM-VTakashi Iwai
VIA82xx driver Added the DXS entry for MSI K8MM-V. Also fixed a typo in last patch for Acer Aspire 1524 WLMi. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] Add VT1617A codec supportPhilip Prindeville
AC97 Codec Added (minimal) support of VT1617A codec with SPDIF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] hda-intel - Add SiS966 supportTakashi Iwai
HDA Intel driver Added SiS966 pci id to snd-hda-intel driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] usb-audio: schedule high speed URBs with 1 ms alignmentClemens Ladisch
USB generic driver The EHCI driver doesn't interrupt more than once per millisecond, and organizes all iso transfers with frame-sized ITDs, so we can (try to) be more efficient by aligning all URBs on frame boundaries. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: make nrpacks parameter writeableClemens Ladisch
USB generic driver The nrpacks module parameter is used only when initializing a playback stream, so it doesn't hurt to make it writeable. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: fix packets per URB calculation for playbackClemens Ladisch
USB generic driver When determining how many packets are needed for one period, we cannot assume that all packets have their maximum size -- we always use the nominal sample rate when sending data, and could use an even lower rate when the endpoint uses frequency feedback. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] usb-audio: use 1 ms URBs when capturingClemens Ladisch
USB generic driver When capturing audio data, we do not know beforehand how many samples the device sends per frame, so we have to use URBs that are as short as possible to make sure that we can handle period boundaries without any additional latencies. Furthermore, the total count of URBs submitted doesn't matter when capturing, so we can just use the maximum number. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] make local objects staticClemens Ladisch
Memalloc module,PCM Midlevel,Timer Midlevel,GUS Library,AC97 Codec ALI5451 driver,RME9652 driver Make some functions/variables that are used in only one file static. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] hda-codec - support for Si3054/5 HDA modemsSasha Khapyorsky
HDA generic driver,HDA Codec driver Support for Si3054/5 HDA modem codecs. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30ALSA CVS updateSasha Khapyorsky
HDA Codec driver,HDA generic driver Summar: hda-codec - MFG support This adds Modem Functional Group (MFG) support and option for 9600 sample rate. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] ALSA's struct _snd_pcm_substream: Obsolete open_flagKarsten Wiese
PCM Midlevel,ALSA<-OSS emulation,USB USX2Y This patch removes open_flag from struct _snd_pcm_substream. All of its uses are substituted by querying struct _snd_pcm_substream's member ffile instead. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] ymfpci: add per-voice volume controlsClemens Ladisch
YMFPCI driver Implements mixer controls for the volume of each playback substream of the main PCM device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] Fix compiler warnings in PXA2XX-AC97Dirk Opfer
ARM PXA2XX driver - change pxa2xx_ac97_do_suspend and pxa2xx_ac97_do_resume to use the expected arguments Signed-off-by: Dirk Opfer <dirk@do13.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] WM9713 modem detectionLiam Girdwood
AC97 Codec This patch fixes a problem whereby the WM9713 has modem functionality incorrectly detected after an AC97 cold reset. Changes:- o Cleared AC97_SCAP_MODEM in wm9713 scaps Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] PXA27x AC97 warm resetLiam Girdwood
ARM PXA2XX driver This patch extends the period of an AC97 warm reset on the PXA27x from 50uS to 500uS. The shorter reset didn't always guarantee that the codec would wake up. Changes:- o Change pxa27x warm reset period to 500uS o Removed double semi-colon. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] ad1816a - Add clockfreq module optionTakashi Iwai
Documentation,AD1816A driver Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] use PCM interface for IEC958 controlsClemens Ladisch
Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver RME HDSP driver,RME9652 driver For consistency, use the PCM interface instead of MIXER for IEC958 default/mask/stream mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] use SNDRV_CTL_NAME_IEC958 macroClemens Ladisch
CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver ICE1712 driver,ICE1724 driver Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal string. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] ad1816a - Add clockfreq module optionTakashi Iwai
Documentation Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] adds __init and in snd_memory_init()Henrik Kretzschmar
ALSA Core This patch adds the __init macro to snd_memory_init(). Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] AC97 bus interface for ad-hoc driversLiam Girdwood
AC97 Codec,PCI drivers I've made the review changes and as requested I've pasted the RFC by Nicolas below:- 'I would like to know what people think of the following patch. It allows for a codec on an AC97 bus to be shared with other drivers which are completely unrelated to audio. It registers a new bus type, and whenever a codec instance is created then a device for it is also registered with the driver model using that bus type. This allows, for example, to use the extra features of the UCB1400 like the touchscreen interface and the additional GPIOs and ADCs available on that chip for battery monitoring. I have a working UCB1400 touchscreen driver here that simply registers with the driver model happily working alongside with audio features using this.' Changes over RFC:- o Now matches codec name within codec group. o Added ac97_dev_release() to stop kernel complaining about no release method for device. o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config SND_AC97_CODEC' out with the PCI=n statement. o module is now called snd-ac97-bus Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] sound - fix .iface field of mixer control elementsClemens Ladisch
Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver RME HDSP driver,RME9652 driver This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or _HWDEP was used in controls that are not associated with a specific PCM (sub)stream or hwdep device, and changes some controls that got inconsitent .iface values due to copy+paste errors. Furthermore, it makes sure that all control that do use _PCM or _HWDEP use the correct number in the .device field. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-30[ALSA] via82xx - Add dxs entry for Acer Aspire 1524 WMLiTakashi Iwai
VIA82xx driver Added the dxs entry for Acer Aspire 1524 WMLi. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] hda-codec - Fix LFE volume/switchNicolas Graziano
HDA Codec driver Fixed LFE volume/switch control. Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] hda-codec - Add default config for ASUS P5AD2Takashi Iwai
HDA Codec driver Added the default config for ASUS P5AD2. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] hda-codec - Fix reordering of surround channelsTakashi Iwai
HDA Codec driver - Fixed the reordering of surround channels. Originally reported by Nicolas GRAZIANO <nicolas.graziano@wanadoo.fr>. - Show the selected ssid when debug option is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-30[ALSA] WM97xx AC97 codec controlsLiam Girdwood
AC97 Codec o Enhanced current WM97xx support to provide additional controls and use the kcontrol suffix naming convention. o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM. o Cleaned up WM97xx related comments. o Removed some wm9713 double mono controls and replaced with stereo controls. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-08-29Merge refs/heads/upstream-fixes from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-29Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 Linus Torvalds
2005-08-30[PATCH] s2io build fixAndrew Morton
Damir Perisa <damir.perisa@solnet.ch> reports: drivers/net/s2io.h:765: error: invalid lvalue in assignment drivers/net/s2io.h:766: error: invalid lvalue in assignment That's a gcc4 error. I don't see why the casts are there anyway.. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-30[PATCH] Remove nested feature sectionsDavid Gibson
The {BEGIN,END}_FTR_SECTION asm macros used in ppc64 to nop out sections of code at runtime cannot be nested. However, we do nest them in hash_low.S. We get away with it there, because there is nothing between the BEGIN markers for each section. However, that's confusing to someone reading the code. This patch removes the nested ifset and ifclr feature sections, replacing them with a single feature section in the full mask/value form. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: lparconfig.c memory leakJoel Schopp
This patch fixes a rare memory leak found by Coverity. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: of_device.c remove useless codeJoel Schopp
Coverity found more unused code. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: Add CONFIG_HZAnton Blanchard
While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being used. Connect it up and set all platforms to 250Hz. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] oprofile PVR 970MPJake Moilanen
Here's the 970MP's PVR (processor version register) entry for oprofile. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] PPC64: Don't try to claim memory from OF at 1GB markOlof Johansson
Some RS64-based machines (p620, F80, others) have problems with firmware returning 0xdeadbeef instead of failure to allocations that end at the 1GB mark. We have two options: 1. Detect the undocumented 0xdeadbeef return value and interpret it as a failure. 2. Avoid allocating that high. (2) is really the cleaner solution here. 768MB is plenty of room so use that as the max alloc_top instead of 1GB. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Move all the very similar files to asm-powerpcStephen Rothwell
They differed in either simple comments or in the protecting ifdefs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Move the identical files from include/asm-ppc{,64}Stephen Rothwell
Move the identical files from include/asm-ppc{,64}/ to include/asm-powerpc/. Remove hdreg.h completely as it is unused in the tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create include/asm-powerpcStephen Rothwell
The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 19:38:20 +0000