aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-11microblaze: PCI early support for noMMU systemMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Fix dma alloc and free coherent dma functionsMichal Simek
We have to use consistent code to be able to do coherent dma function. In consistent code is used cache inhibit page mapping. Xilinx reported that there is bug in Microblaze for WB and d-cache_always use option. Microblaze 7.30.a should be first version where is this bug removed. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add consistent codeMichal Simek
Remove ancient Kconfig option for consistent code. MMU uses cache inhibit pages. noMMU uses UNCACHE SHADOW feature where is used double ram size. For example: Physical ram is 256MB and cache are setup to cover the same size. But if you setup in HW that size is 512MB and cache covers 256MB than you can use adresses from 256-512MB without caches and correspond with 0-256MB with cache. That's why I am using dcache base/high addresses to find out uncache area. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: pgtable.h: move consistent functionsMichal Simek
Consistent functions will be used for noMMU and MMU kernels. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Remove ancient Kconfig option for consistent mappingMichal Simek
We don't use CONSISTENT option from Kconfig that's why I am removing them. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Remove VMALLOC_VMADDRMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add define for ASM_LOOPMichal Simek
It is default option but both options must be measured. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Preliminary support for dma driversMichal Simek
I found several problems for ll_temac driver and on system with WB. This early fix should fix it. I will clean this patch before I will add it to mainline Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: microblaze-uclinux@itee.uq.edu.au Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Use generic show_mem()Michal Simek
Remove arch-specific show_mem() in favor of the generic version. It is based on powerpc patch. bda2fa535564ace56a395d5b65c6dc81305401fa Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Change temp register for cmdlineMichal Simek
For copy was used r7 register when CONFIG_CMDLINE_BOOL option is enabled. But r7 stores pointer to fdt that's why machine_early_init not detect compiled-in DTB. I also moved kernel PID setup to have TLB init in one block Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Preliminary support for dma driversMichal Simek
I found several problems for ll_temac driver and on system with WB. This early fix should fix it. I will clean this patch before I will add it to mainline Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Move cache function to cache.cMichal Simek
It is better to have init cache handling on one place. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add support from PREEMPTMichal Simek
This patch add core PREEMPT support for Microblaze. I tried to trace it via tracers and I was able to see any output. I also added low level debug functions to see if that code is called. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add support for Xilinx PCI host bridgeMichal Simek
This patch is based on powerpc patch 64f16502475ddf663169369fffff6da9b10ea9fb We did some cleanups and removed powerpc parts. There is one new debug early listing function too. Exclude function is only in Debug options. We tested in on custom board. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Enable PCI, missing filesMichal Simek
There are two parts of changes. The first is just enable PCI in Makefiles and in Kconfig. The second is the rest of missing files. I didn't want to add it with previous patch because that patch is too big. Current Microblaze toolchain has problem with weak symbols that's why is necessary to apply this changes to be possible to compile pci support. Xilinx knows about this problem. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add core PCI filesMichal Simek
Add pci-common.h and pci32.c. Files are based on PPC version. There are removed ppc specific parts and the code was completely clean. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add pci-bridge.hMichal Simek
Add pci-bridge.h for Microblaze. It is based on powerpc header file. My changes: I removed PPC_ prefix from constants Removed ppc64 specifis parts Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add pci.hMichal Simek
Add pci.h for microblaze. It is based on powerpc pci.h Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: io.h include asm-generic/iomap.hMichal Simek
I need to use generic/iomap.h for PCI that's why is necessary to include it and fix ioport_{map,unmap} functions. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add irq_create_{of_,}mapping functionsMichal Simek
Support function for PCI. We don't use any advance mapping mechanism that's why implementation is simple. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Add {z,}alloc_maybe_bootmem functionsMichal Simek
I will need {z,}alloc_maybe_bootmem functions for pci patches Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Implement __dma_sync_pageMichal Simek
There is necessary to do some cache handling for dma operations. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11microblaze: Support DMAMichal Simek
Add DMA support for Microblaze. There are some part of this new feature: 1. Basic DMA support 2. Enable DMA debug option 3. Setup notifier Ad 1. dma-mapping come from powerpc and x86 version and it is based on generic dma-mapping-common.h Ad 2. DMA support debug features which is used in generic file. For more information please look at Documentation/DMA-API.txt Ad 3. notifier is very important to setup dma_ops. Without this part for example ll_temac driver failed because there are no setup dma operations. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM Runtime: Make runtime PM of PCI devices inactive by default
2010-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: kfree correct pointer during mount option parsing Btrfs: use RB_ROOT to intialize rb_trees instead of setting rb_node to NULL
2010-03-08Btrfs: kfree correct pointer during mount option parsingJosef Bacik
We kstrdup the options string, but then strsep screws with the pointer, so when we kfree() it, we're not giving it the right pointer. Tested-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-08Btrfs: use RB_ROOT to intialize rb_trees instead of setting rb_node to NULLEric Paris
btrfs inialize rb trees in quite a number of places by settin rb_node = NULL; The problem with this is that 17d9ddc72fb8bba0d4f678 in the linux-next tree adds a new field to that struct which needs to be NULL for the new rbtree library code to work properly. This patch uses RB_ROOT as the intializer so all of the relevant fields will be NULL'd. Without the patch I get a panic. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-08Linux 2.6.34-rc1Linus Torvalds
2010-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits) msi-laptop: depends on RFKILL msi-laptop: Detect 3G device exists by standard ec command msi-laptop: Add resume method for set the SCM load again msi-laptop: Support some MSI 3G netbook that is need load SCM msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook Driver core: create lock/unlock functions for struct device sysfs: fix for thinko with sysfs_bin_attr_init() sysfs: Kill unused sysfs_sb variable. sysfs: Pass super_block to sysfs_get_inode driver core: Use sysfs_rename_link in device_rename sysfs: Implement sysfs_rename_link sysfs: Pack sysfs_dirent more tightly. sysfs: Serialize updates to the vfs inode sysfs: windfarm: init sysfs attributes sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes sysfs: Document sysfs_attr_init and sysfs_bin_attr_init sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes sysfs: Use one lockdep class per sysfs attribute. sysfs: Only take active references on attributes. ...
2010-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] i6300esb.c: change platform_driver to pci_driver [WATCHDOG] i6300esb: fix unlock register with [WATCHDOG] drivers/watchdog/wdt.c:wdt_ioctl(): make `ident' non-static [WATCHDOG] change reboot_notifier to platform-shutdown method. [WATCHDOG] watchdog_info constify [WATCHDOG] gef_wdt: Author corrections following split of GE Fanuc joint venture [WATCHDOG] iTCO_wdt: clean up probe(), modify err msg [WATCHDOG] ep93xx: watchdog timer driver for TS-72xx SBCs cleanup [WATCHDOG] support for max63xx watchdog timer chips [WATCHDOG] ep93xx: added platform side support for TS-72xx WDT driver [WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCs
2010-03-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits) ALSA: hdmi - show debug message on changing audio infoframe ALSA: hdmi - merge common code for intelhdmi and nvhdmi ALSA: hda - Add ASRock mobo to MSI blacklist ALSA: hda: uninitialized variable fix ALSA: hda: Use LPIB for a Biostar Microtech board ALSA: usb/audio.h: Fix field order ALSA: fix jazz16 compile (udelay) ALSA: hda: Use LPIB for Dell Latitude 131L ALSA: hda - Build hda_eld into snd-hda-codec module ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio ALSA: hda - Support max codecs to 8 for nvidia hda controller ALSA: riptide: clean up while loop ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line ALSA: timer - pass real event in snd_timer_notify1() to instance callback ALSA: oxygen: change || to && ALSA: opti92x: use PnP data to select Master Control port ASoC: fix ak4104 register array access ASoC: soc_pcm_open: Add missing bailout tag ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam ALSA: ua101: removing debugging code ...
2010-03-08Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents [S390] smsgiucv: declare char pointers as "const" [S390] dasd: automatic recognition of read-only devices [S390] remove unused qdio flags in zfcp and qeth [S390] Cleanup xtime usage [S390] qdio: add missing bracket [S390] cio: fix init_count in case of recognition after steal lock [S390] dasd: security and PSF update patch for EMC CKD ioctl [S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA [S390] uaccess: make sure copy_from_user_overflow is builtin
2010-03-08FS-Cache: Remove the EXPERIMENTAL flagChristian Kujau
Remove the EXPERIMENTAL flag from FS-Cache so that Ubuntu can make use of the facility. Signed-off-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-08[WATCHDOG] i6300esb.c: change platform_driver to pci_driverWim Van Sebroeck
Since the intel 6300esb platform uses a dedicated PCI ID for it's watchdog timer (00:1d.4), it's better and easier to have this as a pci_driver. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-03-08[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as ueventsHendrik Brueckner
The smsgiucv_app driver registers a callback with the smsgiucv driver to receive z/VM CP special messages (SMSG) starting with "APP". When the callback is called for special messages, the driver creates an uevent for the received message. The uevent consists of additional environment data containing the message prefix ("APP"), message sender, and message content. udev rules can be used to trigger application specific actions through matching the content or sender of the special message. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] smsgiucv: declare char pointers as "const"Hendrik Brueckner
Declare the smsgiucv prefix char pointer as "const" and use use const char pointers in callback functions. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] dasd: automatic recognition of read-only devicesStefan Weinhuber
In z/VM it is possible to attach a device as read-only. To prevent unintentional write requests and subsequent I/O errors, we can detect this configuration using the z/VM DIAG 210 interface and set the respective linux block device to read-only as well. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] remove unused qdio flags in zfcp and qethUrsula Braun
zfcp and qeth are setting flags for the qdio-layer, but these flags are not used in qdio. Patch removes the flag definitions from qdio and their settings in zfcp and qeth. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] Cleanup xtime usageJohn Stultz
This replaces direct xtime usage in the s390 arch with timekeeping accessors, so we can further clean up the timekeeping core. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] qdio: add missing bracketUrsula Braun
Add a missing bracket to only log the outbound handler event in the appropriate case. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] cio: fix init_count in case of recognition after steal lockSebastian Ott
After we try to steal a lock on a ccw device in boxed state, we have to restart device recognition and potentially reprobing. In this case ccw_device_init_count was erroneously decreased twice. This patch fixes the issue. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] dasd: security and PSF update patch for EMC CKD ioctlNigel Hislop
Remove the PSF order/suborder check from the Symmetrix CKD dasd ioctl. In exchange restrict the ioctl to CAP_SYS_ADMIN and CAP_SYS_RAWIO. Signed-off-by: Nigel Hislop <hislop_nigel@emc.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] hvc_iucv: allocate memory buffers for IUCV in zone DMAHendrik Brueckner
The device driver must allocate memory for IUCV buffers with GFP_DMA, because IUCV cannot address memory above 2GB (31bit addresses only). Because the IUCV ignores the higher bits of the address, sending and receiving IUCV data with this driver might cause memory corruptions. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[S390] uaccess: make sure copy_from_user_overflow is builtinHeiko Carstens
If there is no in kernel image caller modules will suffer: ERROR: "copy_from_user_overflow" [net/core/pktgen.ko] undefined! ERROR: "copy_from_user_overflow" [net/can/can-raw.ko] undefined! ERROR: "copy_from_user_overflow" [fs/cifs/cifs.ko] undefined! Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08[WATCHDOG] i6300esb: fix unlock register withWim Van Sebroeck
Before you can read or write from the i6300esb memeory mapped registers, you need to unlock these. This is done by writing the magic numbers 0x80 and 0x86 to the reload register. The size of the reload register is 32bit though. Also binary 11 is hex 0x03 and not 0x11. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-03-08Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-03-08Merge branch 'topic/asoc' into for-linusTakashi Iwai
2010-03-08Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-03-08ALSA: hdmi - show debug message on changing audio infoframeWu Fengguang
Also change printk level for the two others. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-04 06:31:39 +0000