aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-29rz1000: apply chipset quirks early (v2)Bartlomiej Zolnierkiewicz
* Use pci_name(dev) instead of hwif->name in init_hwif_rz1000(). * init_hwif_rz1000() -> rz1000_init_chipset(). Update rz1000_init_one() to use rz1000_init_chipset() and add now required rz1000_remove(). * Remove superfluous ide_rz1000 chipset type. v2: * unsigned int rz1000_init_chipset() -> int rz1000_disable_readahead() per Sergei's suggestion. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: always set nIEN on idle devicesBartlomiej Zolnierkiewicz
* Set nIEN for previous port/device in ide_do_request() also if port uses a non-shared IRQ. * Remove no longer needed ide_hwif_t.sharing_irq. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: fix ->quirk_list checking in ide_do_request()Bartlomiej Zolnierkiewicz
Fix nIEN quirk check to also omit quirky devices using pdc202xx_{new,old} host drivers for which ->quirk_list == 2. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29gayle: set IDE_HFLAG_SERIALIZE explictlyBartlomiej Zolnierkiewicz
If IDE doubler is used ports need to be serialized. Currently init_irq() handles it fine but lets also set IDE_HFLAG_SERIALIZE host flag explicitly in preparation for future changes. Also convert the driver to use struct ide_port_info while at it. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646Bartlomiej Zolnierkiewicz
* Set IDE_HFLAG_SERIALIZE explictly for CMD646. * Remove no longer needed ide_cmd646 chipset type (which has a nice side-effect of fixing handling of unexpected IRQs). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ali14xx: doesn't use shared IRQsBartlomiej Zolnierkiewicz
init_irq() shouldn't use IRQF_SHARED for ali14xx IDE IRQ handler. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide-cd: remove obsolete seek optimizationBartlomiej Zolnierkiewicz
It doesn't make much sense nowadays and is problematic on some drives. Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: cleanup ide_do_request()Bartlomiej Zolnierkiewicz
Both choose_drive() and PM handling code make sure that the queue is unplugged so no need to check it again. Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: replace the global ide_lock spinlock by per-hwgroup spinlocks (v2)Bartlomiej Zolnierkiewicz
Now that (almost) all host drivers have been fixed not to abuse ide_lock and core code usage of ide_lock has been sanitized we may safely replace ide_lock by per-hwgroup locks. This patch is partially based on earlier patch from Ravikiran G Thirumalai. While at it: - don't use deprecated HWIF() and HWGROUP() macros - update locking documentation in ide.h v2: Add missing spin_lock_init(&hwgroup->lock). (Noticed by Elias Oltmanns) Cc: Vaibhav V. Nivargi <vaibhav.nivargi@gmail.com> Cc: Alok N. Kataria <alokk@calsoftinc.com> Cc: Shai Fultheim <shai@scalex86.org> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: use queue lock instead of ide_lock when possibleBartlomiej Zolnierkiewicz
This is just a preparation for future changes and there should be no functional changes caused by this patch since ide_lock is currently also used as queue lock. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: ide_lock + __blk_end_request() -> blk_end_request()Bartlomiej Zolnierkiewicz
Use blk_end_request() instead of ide_lock + __blk_end_request() in cdrom_end_request(), cdrom_newpc_intr(), __ide_end_request(), ide_complete_pm_request() and ide_end_drive_cmd(). [ ide_lock is currently also used as queue lock ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: push ide_lock to __ide_end_request()Bartlomiej Zolnierkiewicz
__ide_end_request() needs ide_lock only for __blk_end_request() call so push ide_lock taking inside __ide_end_requests(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: ide_hwgroup_t.rq doesn't need an ide_lock heldBartlomiej Zolnierkiewicz
While at it: - no need to check for hwgroup presence in ide_dump_opcode() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: __ide_port_unregister_devices() doesn't need an ide_lock heldBartlomiej Zolnierkiewicz
[ and ide_cfg_mtx mutex provides a sufficient protection for callers ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: IDE settings don't need an ide_lock heldBartlomiej Zolnierkiewicz
IDE settings are protected by ide_setting_mtx mutex so there is no need to hold ide_lock in ide_setting_ioctl(), ide_read_setting() and ide_proc_unregister_driver(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: unify ide_intr()'s exit pointsBartlomiej Zolnierkiewicz
Just a preparation for future changes. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: fix IDE ACPI regression breaking suspendBartlomiej Zolnierkiewicz
Commit 4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab ("ide: make drive->id an union (take 2)") accidentally introduced an IDE ACPI regression which at least on some machines confuses ACPI and breaks suspend. Fix it. Fixes kernel.org bug #12279: http://bugzilla.kernel.org/show_bug.cgi?id=12279 [ Sorry about the bug (IDE ACPI is not used by default so it managed to slip in). Still it is kind of surprising that the bug breaks suspend as it shouldn't impact anything except IDE ACPI (it seems that it uncovered either some ACPI/PM deficiency or a BIOS bug). ] Reported-and-bisected-by: David Roka <roka@dawid.hu> Tested-by: David Roka <roka@dawid.hu> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29tx493[89]ide: Fix length for __ide_flush_dcache_rangeAtsushi Nemoto
This fixes data corruption on PIO mode. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: stable <stable@kernel.org> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29tx4939ide: Do not use zero count PRD entryAtsushi Nemoto
This fixes data corruption on some heavy load. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: stable <stable@kernel.org> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-24Linux 2.6.28Linus Torvalds
Happy holidays..
2008-12-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well. V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking. V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support) V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button
2008-12-24Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable X86_PTRACE_BTS
2008-12-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing terminators in patch_sigmatel.c
2008-12-24ALSA: hda - Add missing terminators in patch_sigmatel.cHerton Ronaldo Krzesinski
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-24x86: disable X86_PTRACE_BTSIngo Molnar
there's a new ptrace arch level feature in .28: config X86_PTRACE_BTS bool "Branch Trace Store" it has broken fork() handling: the old DS area gets copied over into a new task without clearing it. Fixes exist but they came too late: c5dee61: x86, bts: memory accounting bf53de9: x86, bts: add fork and exit handling and are queued up for v2.6.29. This shows that the facility is still not tested well enough to release into a stable kernel - disable it for now and reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS facilities too - hopefully resulting in better code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23parisc: disable UP-optimized flush_tlb_mmKyle McMartin
flush_tlb_mm's "optimized" uniprocessor case of allocating a new context for userspace is exposing a race where we can suddely return to a syscall with the protection id and space id out of sync, trapping on the next userspace access. Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix correctness of irq_enabled check for radeon.
2008-12-23edac: fix edac core deadlock when removing a deviceHarry Ciao
When deleting an edac device, we have to wait for its edac_dev.work to be completed before deleting the whole edac_dev structure. Since we have no idea which work in current edac_poller's workqueue is the work we are conerned about, we wait for all work in the edac_poller's workqueue to be proceseed. This is done via flush_cpu_workqueue() which inserts a wq_barrier into the tail of the workqueue and then sleeping on the completion of this wq_barrier. The edac_poller will wake up sleepers when it is found. EDAC core creates only one kernel worker thread, edac_poller, to run the works of all current edac devices. They share the same callback function of edac_device_workq_function(), which would grab the mutex of device_ctls_mutex first before it checks the device. This is exactly where edac_poller and rmmod would have a great chance to deadlock. In below call trace of rmmod > ... > edac_device_del_device > edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue, device_ctls_mutex would have already been grabbed by edac_device_del_device(). So, on one hand rmmod would sleep on the completion of a wq_barrier, holding device_ctls_mutex; on the other hand edac_poller would be blocked on the same mutex when it's running any one of works of existing edac evices(Note, this edac_dev.work is likely to be totally irrelevant to the one that is being removed right now)and never would have a chance to run the work of above wq_barrier to wake rmmod up. edac_device_workq_teardown() should not be called within the critical region of device_ctls_mutex. Just like is done in edac_pci_del_device() and edac_mc_del_mc(), where edac_pci_workq_teardown() and edac_mc_workq_teardown() are called after related mutex are released. Moreover, an edac_dev.work should check first if it is being removed. If this is the case, then it should bail out immediately. Since not all of existing edac devices are to be removed, this "shutting flag" should be contained to edac device being removed. The current edac_dev.op_state can be used to serve this purpose. The original deadlock problem and the solution have been witnessed and tested on actual hardware. Without the solution, rmmod an edac driver would result in below deadlock: root@localhost:/root> rmmod mv64x60_edac EDAC DEBUG: mv64x60_dma_err_remove() EDAC DEBUG: edac_device_del_device() EDAC DEBUG: find_edac_device_by_dev() (hang for a moment) INFO: task edac-poller:2030 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. edac-poller D 00000000 0 2030 2 Call Trace: [df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable) [df159e80] [c000a024] __switch_to+0x6c/0xa0 [df159ea0] [c03587d8] schedule+0x2f4/0x4d8 [df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174 [df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core] [df159f60] [c003beb4] run_workqueue+0x114/0x218 [df159f90] [c003c674] worker_thread+0x5c/0xc8 [df159fd0] [c004106c] kthread+0x5c/0xa0 [df159ff0] [c0013538] original_kernel_thread+0x44/0x60 INFO: task rmmod:2062 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 0ff2c9fc 0 2062 1839 Call Trace: [df119c00] [c0437a74] 0xc0437a74 (unreliable) [df119cc0] [c000a024] __switch_to+0x6c/0xa0 [df119ce0] [c03587d8] schedule+0x2f4/0x4d8 [df119d40] [c03591dc] schedule_timeout+0xb0/0xf4 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23cgroups: avoid accessing uninitialized data in failure pathLi Zefan
If cgroup_get_rootdir() failed, free_cg_links() will be called in the failure path, but tmp_cg_links hasn't been initialized at that time. I introduced this bug in the 2.6.27 merge window. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23cgroups: suppress bogus warning messagesSharyathi Nagesh
Remove spurious warning messages that are thrown onto the console during cgroup operations. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Sharyathi Nagesh <sharyathi@in.ibm.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23w1: fix slave selection on big-endian systemsEvgeniy Polyakov
During test of the w1-gpio driver i found that in "w1.c:679 w1_slave_found()" the device id is converted to little-endian with "cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293 w1_reset_select_slave()". Based on a patch created by Andreas Hummel. [akpm@linux-foundation.org: remove unneeded cast] Reported-by: Andreas Hummel <andi_hummel@gmx.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23rtc: rtc-isl1208: reject invalid datesChris Elston
This patch for the rtc-isl1208 driver makes it reject invalid dates. Signed-off-by: Chris Elston <celston@katalix.com> [a.zummo@towertech.it: added comment explaining the check] Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Hebert Valerio Riedel <hvr@gnu.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to ↵Devin Heitmueller
VIDIOC_INT_RESET command Fix a NULL pointer dereference that would occur if the video decoder tied to the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver) Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-23drm/radeon: fix correctness of irq_enabled check for radeon.Dave Airlie
This check was introduced with the logic the wrong way around. Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216 Tested-by: François Valenduc <francois.valenduc@tvcablenet.be> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: don't cond_resched() when irqs_disabled() ACPI: fix 2.6.28 acpi.debug_level regression
2008-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test
2008-12-22drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-22Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: MIPS64R2: Fix buggy __arch_swab64 MIPS: Fix preprocessor warnings flaged by GCC 4.4
2008-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ppp: fix segfaults introduced by netdev_priv changes net: Fix module refcount leak in kernel_accept()
2008-12-22MIPS: MIPS64R2: Fix buggy __arch_swab64David Daney
The way the code is written it was assuming dshd has the function of a hypothetical dshw instruction ... Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-22MIPS: Fix preprocessor warnings flaged by GCC 4.4David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-20Null pointer deref with hrtimer_try_to_cancel()Thomas Gleixner
Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW commit 2d42244ae71d6c7b0884b5664cf2eda30fb2ae68 (clocksource: introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only available to read out the raw not NTP adjusted system time. The above commit did not prevent that a posix timer can be created with that clockid. The timer_create() syscall succeeds and initializes the timer to a non existing hrtimer base. When the timer is deleted either by timer_delete() or by the exit() cleanup the kernel crashes. Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the posix clock function to no_timer_create which returns an error code. Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: change simple_strtol to simple_strtoul 9p: convert d_iname references to d_name.name 9p: Remove potentially bad parameter from function entry debug print.
2008-12-20Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix resume (S2R) broken by Intel microcode module, on A110L x86 gart: don't complain if no AMD GART found AMD IOMMU: panic if completion wait loop fails AMD IOMMU: set cmd buffer pointers to zero manually x86: re-enable MCE on secondary CPUS after suspend/resume AMD IOMMU: allocate rlookup_table with __GFP_ZERO
2008-12-20x86: fix resume (S2R) broken by Intel microcode module, on A110LDmitry Adamushko
Impact: fix deadlock This is in response to the following bug report: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12100 Subject : resume (S2R) broken by Intel microcode module, on A110L Submitter : Andreas Mohr <andi@lisas.de> Date : 2008-11-25 08:48 (19 days old) Handled-By : Dmitry Adamushko <dmitry.adamushko@gmail.com> [ The deadlock scenario has been discovered by Andreas Mohr ] I think I might have a logical explanation why the system: (http://bugzilla.kernel.org/show_bug.cgi?id=12100) might hang upon resuming, OTOH it should have likely hanged each and every time. (1) possible deadlock in microcode_resume_cpu() if either 'if' section is taken; (2) now, I don't see it in spec. and can't experimentally verify it (newer ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should be back to its original one (we need to reload ucode anyway so it doesn't seem logical if a cpu doesn't drop the version)... if so, the comparison with memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of the aforementioned 'if' sections might have been triggered - leading to a deadlock. Obviously, in my tests I simulated loading/resuming with the ucode of the same version (just to see that the file is loaded/re-loaded upon resuming) so this issue has never popped up. I'd appreciate if someone with an appropriate system might give a try to the 2nd patch (titled "fix a comparison && deadlock..."). In any case, the deadlock situation is a must-have fix. Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19fs/9p: change simple_strtol to simple_strtoulJulia Lawall
Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-12-199p: convert d_iname references to d_name.nameWu Fengguang
d_iname is rubbish for long file names. Use d_name.name in printks instead. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-12-199p: Remove potentially bad parameter from function entry debug print.Duane Griffin
Signed-off-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt fusion: clear list of outstanding commands on host reset [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock [SCSI] ibmvstgt: move crq_queue_create to the end of initialization [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S
2008-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix a Oops bug in omap soc driver. ALSA: hda - Remove non-working headphone control for Dell laptops ALSA: hda - Add no-jd model for IDT 92HD73xx ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" ALSA: hda - Add quirk for Dell Studio 17 ALSA: hda - Fix silent HP output on D975
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 02:37:15 +0000