aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13135): Add support for TeVii remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as TeVii S460,S420. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13134): Add support for TBS-likes remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as: TeVii S460,S420; Omicom SS4; SatTrade ST4200; TBS 8920,8910; Prof 7300,6200. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13130): soc-camera: add a new driver for the RJ54N1CB0C camera ↵Guennadi Liakhovetski
sensor from Sharp This adds an soc-camera / v4l2-subdev driver for the RJ54N1CB0C CMOS camera sensor from Sharp. The sensor is very picky about initialisation and configuration sequences. The driver limits artificially maximum window size by 800x600, although the sensor supports 1600x1200. Sizes above 800x600 don't seem to work correctly, besides, examples from the system integrator use sizes above 640x480 only for still photography. Unfortunately, I had to use "magic" register-value pairs for undocumented and "reserved" registers. This version of the driver also omits some functionality, like cropping, which hasn't been sufficiently tested yet and will be added later. create mode 100644 drivers/media/video/rj54n1cb0c.c Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13128): sh_mobile_ceu_camera: add VBP error supportKuninori Morimoto
If CEU driver can not receive data from camera, CETCR has VBP error state. Then, CEU is stopped and cure operation is needed. This patch add VBP error cure operation. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13127): sh_mobile_ceu: add soft reset functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13121): gspca - pac7311: add comment about JPEG headerMarton Nemeth
Add comment about the meaning of the fixed JPEG header bytes used to create each image. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13120): gspca - pac7311: remove redundant register page switchingMarton Nemeth
Remove redundant register page switching to page 0 when changing the color control. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13119): gspca - pac7311: remove magic value for USB_BUF_SZMarton Nemeth
The length check in reg_w_var() function is because the buffer contents is copied to gspca_dev->usb_buf which has the size of USB_BUF_SZ bytes as defined in drivers/media/video/gspca/gspca.h. Replace the number with symbol for better readability and maintainability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13118): gspca - pac7311: remove magic values for END_OF_SEQUENCE ↵Marton Nemeth
and LOAD_PAGE. Change the magic values 0, 254 and 255 to END_OF_SEQUENCE, LOAD_PAGE4 and LOAD_PAGE3 respectively for better source code readability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13117): gspca - pac7311: remove magic value for SKIP.Marton Nemeth
Change the magic value 0xaa to SKIP for better understandability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13116): gspca - ov519: Webcam 041e:4067 added.Rafal Milecki
Signed-off-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13115): gspca - main: More information messages.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13114): gspca - zc3xx.c: Bad init sequences of sensor cs2102.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13112): tda18271: display some state information in debug outputMichael Krufky
Display i2c adapter id, address and master / slave role in debug output. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13111): tda18271: more signedness fixesMichael Krufky
Convert tda18271_rf_tracking_filter_cal.rf_[ab][12] from int to s32. Convert tda18271_priv.tm_rfcal from unsigned int to u8. Cast subtractions between u32 values as s32. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13110): tda18271: use temporary variables in ↵Michael Krufky
tda18271_rf_tracking_filters_init Use temporary variables for signed calulations between unsigned values Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13108): tda8290: enable deemphasis_50 module parameterHenk Vergonet
This adds a forgotten module_param macro needed to set a deemphasis of 50us. It is the standard setting for commercial FM radio broadcasts outside the US. Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13105): dvb-usb: add fe_ioctl_override callback to ↵Michael Krufky
dvb_usb_adapter_properties Allow dvb-usb adapter drivers to specify a fe_ioctl_override callback to enable device-specific handling of DVB frontend operations. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13104): cx23885: define a dvb frontend ioctl override functionMichael Krufky
override set_frontend to allow rf input path switching on the HVR1275 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13103): create a standard method for dvb adapter drivers to ↵Michael Krufky
override frontend ioctls Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13100): cx23885: Add IR input keypress handling and enable for the ↵Andy Walls
HVR-1850 This changes adds IR Rx keypress input event handling to the CX23885 module. This change specifically only adds input handling for IR devices implemented as v4l2_subdevices, using only the pulse width mode (for now), and only with RC-5 remotes. The V4L-DVB infrastructure is missing too much to support RC-6 mode 6A as used in many media center remotes. The grey Hauppauge RC-5 remote and HVR-1850 IR receiver work now. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13099): ir-functions: Export ir_rc5_decode() for use by the cx23885 ↵Andy Walls
module Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13098): cx23885: Add integrated IR subdevice interrupt and ↵Andy Walls
notification handling Add integrated IR subdevice interrupt and notification handling. This is in preparation of input keypress handling changes for the cx23885 module. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13097): cx23885: Complete CX23888 IR subdev implementation for Rx & ↵Andy Walls
almost for Tx This change completes the v4l2_subdev implementation for IR receive for the IR controller built into the CX23888. This changes almost completes the IR transmit side also, but doesn't. Instead notes in the comments describe what needs to be done for IR Tx to work in the subdevice implementation. The current Tx behavior is skeletal and benign. If left alone, it does nothing. It will only ever generate a Tx interrupt on Tx init by a caller or when the tx_write() method is called. The ISR, when called, will then disable the Tx FIFO service interrupt. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13096): v4l2-subdev: Add v4l2_subdev_ir_ops and IR notify defines ↵Andy Walls
for v4l2_device Add v4l2_subdev_ir_ops and IR notify defines for v4l2_device. This change is specifically needed at this time to support the integrated IR controller in the CX2388[58] chips. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13092): cx25840: Improvements to the cx23885/7/8 chip detection ↵Steven Toth
mechanism. The prior mechanism wasn't reliable with the cx23887. This new mechanism tests correctly against cx23885, 7 and 8 based products. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13091): cx23885: Enable HVR-1850 CX23888 A/V core to get VID_CLK ↵Andy Walls
running for IR For the IR controller on the CX23888 to work for the HVR-1850 and in general, the A/V core must be initialized to get the VID_CLK going. The VID_CLK is the timing reference for the CX23888's integrated IR controller. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13090): cx25840: Init PLLs properly for CX2388[578] A/V coresAndy Walls
The SYS and AUX PLLs need to be initialized to different values based on the chip: CX23885, CX23887, CX23888, as each uses a different crystal frequency: 28.6363 MHz, 25.0 MHz, 50.0 MHz. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13089): cx25840: Separate set_audclk_freq functionality for the ↵Andy Walls
different chips Separate out the set_audclk_freq() function into separate functions for the four families of cores. These cores all use slightly different sample clock schemes and may be assuming slightly (+/- 3 Hz) different reference frequencies. The code resuse was not worth the maintenance and testing headache of have all chips use the same function peppered with conditional logic. Added comments on how PLL and SRC parameters values are computed. Fixed a few bugs related to the shared code having a large number of conditional statements. Noted inconsistencies with FIXME in the comments. This is done in preparation for getting the CX2388[578] PLL/clock setting logic cleaned up for CX23888 analog video and IR (which need the VID PLL set right). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13088): cx25840: Convert chip/core family checks to static inline ↵Andy Walls
functions Change logic to check for various chip or core families to inline functions. Checks for specific chips should be made against the state->id field now. This is in preparation for chip/core specific code for setting up PLLs for the CX2388[578] family of cores, that all run with different crystal frequencies. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13087): cx25840: Improve detection of CX2388[578] A/V coresAndy Walls
Add improved logic to detect the exact CX2388[578] A/V core that is being probed. Also cleaned up detection and logging for CX2310[12], CX2583[67], and CX2584[0123] cores and chips. Also added code to identify a CX2388[578] A/V decoder core that is not responding properly. Typical symptoms include registers 0x00-0xff responding properly but all other registers returning the same value (0x13 and 0x5 have been observed). This state will cause proper detection of '885 vs. '887 vs. '888 to fail and the chip won't respond to get configured properly anyway. I have no method of reseting the core to a working state at this time; but I didn't try too hard to work one out either. The problem likely only occurs in development. I suspect configuring the SYS PLL VCO to oscillate too slowly (286.3 MHz?) before post divide may be the root cause, when encountered. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13086): cx23885: Add skeleton v4l2_subdev for the CX23888 ↵Andy Walls
integrated IR controller This change adds a skeletal implementation of a v4l2_subdevice to provide encapsulation and abstraction of the CX23888's integrated consumer infrared controller. This change also instantiates the cx23888_ir subdev for the HVR-1850 which has IR hardware physically wired up to a CX23888. The cx23888_ir subdev code is being written with long-term objectives to: 1. port it to the cx25840 module for the CX2584x, CX2583x, CX23885, & CX231xx IR controllers 2. possibly port it to the cx18 module for the CX23418 IR controller 3. have the IR subdevice accessed abstractly in the cx23885 module, so the driver can ignore the difference between the CX23885 and CX23888. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13085): cx23885: Fix support for v4l2-dbg access to CX2388[578] and ↵Andy Walls
CX23417 regs This changes corrects the ioctl() operations for both the CX2388[578] analog video and MPEG video device nodes to properly and consistently support VIDIOC_G_CHIP_IDENT, VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER ioctl()s. This caused some ioctl() support routines to be broken out into a separate source file. Now v4l2-dbg can be used to manipulate CX2388[578] and CX23417 registers including the CX2388[57] functions handled by the cx25840 module. This was done in anticipation of developing a new v4l2_subdev for the integrated IR controller of the CX23888. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13084): v4l2-chip-ident: Add ID's needed for the cx23885 and ↵Andy Walls
cx25840 modules Add identifiers for CX2388[578] chips, CX2310[012] chips, integrated A/V decoders cores, integrated IR controller core, and the CX23417 MPEG encoder. The cx23885 module and cx25840 module will use these identifiers in upcoming changes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13082): em28xx: remove "not validated" status from Terratec Cinergy ↵Devin Heitmueller
T XS (005e) The board support has been validated by the user, so get rid of the warning that shows up on board load. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13081): saa7134: use the #define for the xc5000 radio_input fieldDevin Heitmueller
Dmitri's patch for the Behold X7 didn't use the #define I had setup for XC5000_RADIO_FM1, so cut over to using that instead of "1". Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13080): saa7134: add support for the digital side of the Behold X7Beholder Intl. Ltd. Dmitry Belimov
Add support for the digital side of the Behold X7 Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13078): em28xx: fix support for Terratec Cinergy T XS (005e)Uroš Vampl
Make analog audio, dvb and the remote work on a Terratec Cinergy Hybrid XS (em2882). Note by djh: Thanks go out fo Andrej Suligoi for his contribution in providing and testing pretty much the exact same patch as provided by Uros. Between the two of them, they got all the core functionality working for the device. Cc: Andrej Suligoi <suligoi@gmail.com> Signed-off-by: Uroš Vampl <mobile.leecher@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13077): em28xx: Add support for new variant of KWorld 2800dDevin Heitmueller
Seems that the reference design used for the KWorld 2800d switched from the em2860 to em2862, so we need to add the new USB id (and the i2c hash remains so all we need is the default em2862 id. Thanks to Ian Young for reporting the issue and testing the fix. Cc: Ian Young <ian@duffrecords.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13076): xc5000: make the definition of the FM input part of the ↵Devin Heitmueller
xc5000 config struct Remove hard-coded definition of the xc5000 FM radio input, making it a parameter passed in when doing the attach call. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13075): xc5000: add FM radio supportBeholder Intl. Ltd. Dmitry Belimov
Add FM radio for the xc5000 silicon tuner chip. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13073): radio-mr800: set radio frequency only upon successDavid Ellingsworth
Set radio frequency only upon success. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13072): radio-mr800: simplify device warningsDavid Ellingsworth
Simplify device warnings. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13071): radio-mr800: preserve radio state during suspend/resumeDavid Ellingsworth
Preserve radio state during suspend/resume. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13070): radio-mr800: fix behavior of set_stereo functionDavid Ellingsworth
Fix behavior of set_stereo function. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13069): radio-mr800: ensure the radio is initialized to a ↵David Ellingsworth
consistent state Ensure the radio is initialized to a consistent state. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13068): radio-mr800: remove device initialization from open/closeDavid Ellingsworth
Remove device initialization from open/close. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13067): radio-mr800: fix potential use after freeDavid Ellingsworth
Fix portential use after free. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13066): radio-mr800: remove device removed indicatorDavid Ellingsworth
Remove device removed indicator Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13065): radio-mr800: simplify locking in ioctl callbacksDavid Ellingsworth
Simplify locking in ioctl callbacks. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-23 12:44:37 +0000