aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-25Merge branches 'clks' and 'pnx' into develRussell King
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-25Merge branch 'perf' into develRussell King
Conflicts: arch/arm/Kconfig
2010-02-25Merge branch 'tmpreg' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', ↵Russell King
'pending-dma-streaming', 'u300' and 'umc' into devel
2010-02-25ARM: Eliminate decompressor -Dstatic= PIC hackRussell King
We used to build decompressors with -Dstatic= to avoid any local data being generated. The problem is that local data generates GOTOFF relocations, which means we can't relocate the data relative to the text segment. Global data, on the other hand, goes through the GOT, and can be relocated anywhere. Unfortunately, with the new decompressors, this presents a problem since they declare static data within functions, and this leads to stack overflow. Fix this by separating out the decompressor code into a separate file, and removing 'static' from BSS data in misc.c. Also, discard the .data section - this means that should we end up with read/write initialized data, the decompressor will fail to link and the problem will be obvious. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5958/1: ARM: U300: fix inverted clk round rateLinus Walleij
The clk_round_rate() functions in the U300 clocking will always select the lowest clocking frequency due to inverted rounding comparisons. Fix this. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5956/1: misplaced parenthesesRoel Kluin
The parentheses appear misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5955/1: ep93xx: move timer defines into core.c and documentHartley Sweeten
The timer defines are only used in core.c. Move them so they will not be globaly exposed. While here, add additional defines to document the magic numbers used in the registers. Also, add some comments for clarification. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.cHartley Sweeten
The GPIO support in core.c handles the interrupt support for GPIO ports A, B, and F. The gpiolib implementation in gpio.c needs to access the function ep93xx_gpio_int_mask when a gpio pin is made an output and ep93xx_gpio_update_int_params in order to update the registers. Moving this support from core.c to gpio.c allows making the two functions static. It also keeps all the GPIO handling together in one file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5953/1: ep93xx: fix broken build of clock.cHartley Sweeten
Patch 5879/1: ep93xx: define magic numbers for pll1 and pll2 broke the ep93xx build due to one missing rename of EP93XX_SYSCON_CLOCK_SET2. The correct name should be EP93XX_SYSCON_CLKSET2. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH ↵Kukjin Kim
Kconfig Add ARM_L1_CACHE_SHIFT_6 to arch/arm/Kconfig to allow CPUs with L1 cache lines which are 64bytes to indicate this without having to alter the arch/arm/mm/Kconfig entry each time. Update the mm Kconfig so that ARM_L1_CACHE_SHIFT default value uses this and change OMAP3 and S5PC1XX to select ARM_L1_CACHE_SHIFT_6. Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-21ARM: 5949/1: NUC900 add gpio virtual memory mapwanzongshun
NUC900 add gpio virtual memory map Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Signed-off-by: Wang Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-21ARM: 5948/1: Enable timer0 to time4 clock support for nuc910wanzongshun
Enable timer0 to time4 clock support for nuc910 Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Signed-off-by: Wang Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-21ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printkLinus Walleij
This removes the custom DBG macro in favor of the in-kernel dev_dbg() macro. Probably a leftover from a time when dev_dbg() didn't yet exist. Also remove a printk() in favor of dev_err(). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20ARM: make_coherent(): fix problems with highpte, part 2Russell King
update_mmu_cache() is called with the page table for the faulted-in page still mapped. We need to modify the PTE for this page to ensure coherency with other shared mappings when multiple shared mappings exist within a MM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itselfRussell King
On VIVT ARM, when we have multiple shared mappings of the same file in the same MM, we need to ensure that we have coherency across all copies. We do this via make_coherent() by making the pages uncacheable. This used to work fine, until we allowed highmem with highpte - we now have a page table which is mapped as required, and is not available for modification via update_mmu_cache(). Ralf Beache suggested getting rid of the PTE value passed to update_mmu_cache(): On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables to construct a pointer to the pte again. Passing a pte_t * is much more elegant. Maybe we might even replace the pte argument with the pte_t? Ben Herrenschmidt would also like the pte pointer for PowerPC: Passing the ptep in there is exactly what I want. I want that -instead- of the PTE value, because I have issue on some ppc cases, for I$/D$ coherency, where set_pte_at() may decide to mask out the _PAGE_EXEC. So, pass in the mapped page table pointer into update_mmu_cache(), and remove the PTE value, updating all implementations and call sites to suit. Includes a fix from Stephen Rothwell: sparc: fix fallout from update_mmu_cache API change Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18ARM: 5945/1: ep93xx: include correct irq.h in core.cHartley Sweeten
Currently <asm/mach/irq.h> is included by core.c. This header includes <linux/irq.h> and defines a number of internal functions. These internal functions are not needed by this file. Change the include so that we just get what is needed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18ARM: 5933/1: amba-pl011: support hardware flow controlRabin Vincent
Enable/disable automatic hardware flow control as requested by the termios. The controller does not allow us to control the RTS line when auto-RTS is enabled, so we enable auto-RTS only if the kernel has not disabled RTS. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5930/1: Add PKMAP area description to memory.txt.Fenkart/Bostandzhyan
Also adapts delimiters of neighbouring modules area. Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5929/1: Add checks to detect overlap of memory regions.Fenkart/Bostandzhyan
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5927/1: Make delimiters of DMA area globally visibly.Fenkart/Bostandzhyan
Adds DMA area to 'virtual memory map' startup message Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5926/1: Add "Virtual kernel memory..." printout.Fenkart/Bostandzhyan
Code based on parisc and x86_32. Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5920/1: OMAP4: Enable L2 CacheSantosh Shilimkar
This patch enables L2 cache and associated Errata on the OMAP4430 SDP. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5919/1: ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate ↵Santosh Shilimkar
clean lines This patch implements the work-around for the errata 588369.The secure API is used to alter L2 debug register because of trust-zone. This version updated with comments from Russell and Catalin and generated against 2.6.33-rc6 mainline kernel. Detail comments can be found: http://www.spinics.net/lists/linux-omap/msg23431.html Signed-off-by: Woodruff Richard <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5917/1: OMAP4: Add L2 Cache supportSantosh Shilimkar
This patch adds L2 Cache support for OMAP4. External L2 cache is used in OMAP4 CC: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5916/1: ARM: L2 : Add maintainace by line helper functionsSantosh Shilimkar
This patch adds the cache maintainance by line helper functions. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: vfp ptrace: no point flushing hw context for PTRACE_GETVFPREGSRussell King
If we're only reading the VFP context via the ptrace call, there's no need to invalidate the hardware context - we only need to do that on PTRACE_SETVFPREGS. This allows more efficient monitoring of a traced task. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: vfp: fix vfp_sync_state()Russell King
The more I look at vfp_sync_state(), the more I believe it's trying to do its job in a really obscure way. Essentially, last_VFP_context[] tracks who owns the state in the VFP hardware. If last_VFP_context[] is the context for the thread which we're interested in, then the VFP hardware has context which is not saved in the software state - so we need to bring the software state up to date. If last_VFP_context[] is for some other thread, we really don't care what state the VFP hardware is in; it doesn't contain any information pertinent to the thread we're trying to deal with - so don't touch the hardware. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: ptrace: get rid of PTRACE_{PEEK,POKE}{TEXT,DATA}Russell King
The generic ptrace_request() handles these for us, so there's no need to duplicate them in arch code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5912/1: Define a 32-bit Thumb-2 breakpoint instructionDaniel Jacobowitz
Recognize 0xf7f0 0xa000 as a 32-bit breakpoint instruction for Thumb-2. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5911/1: ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 is not selectedTony Lindgren
Otherwise the kernel built with both CPU_V6 and CPU_V7 will not boot on omap2. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5905/1: ARM: Global ASID allocation on SMPCatalin Marinas
The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5906/1: arm: change command_line to cmd_lineJeremy Kerr
drivers/of/fdt expects a cmd_line symbol, while arm uses command_line. Change to the former, so that we can eventually share with the fdt code. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5897/1: spinlock: don't use deprecated barriers on ARMv7Rabin Vincent
On ARMv7, the use of the cp15 operations for barriers is deprecated in favour of the isb, dsb, and dmb instructions. Change the locking functions to use the appropriate type of dsb for the architecture being built for. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5889/1: Add atomic64 routines for ARMv6k and above.Will Deacon
In preparation for perf-events support, ARM needs to support atomic64_t operations. v6k and above support the ldrexd and strexd instructions to do just that. This patch adds atomic64 support to the ARM architecture. v6k and above make use of new instructions whilst older cores fall back on the generic solution using spinlocks. If and when v7-M cores are supported by Linux, they will need to fall back on the spinlock implementation too. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: add notify_die() supportRussell King
Kernel debuggers want to be informed of die() events, so that they can take some action to allow the problem to be inspected. Provide the hook in a similar manner to x86. Note that we currently don't implement the individual trap hooks. Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5880/1: arm: use generic infrastructure for early paramsJeremy Kerr
The ARM setup code includes its own parser for early params, there's also one in the generic init code. This patch removes __early_init (and related code) from arch/arm/kernel/setup.c, and changes users to the generic early_init macro instead. The generic macro takes a char * argument, rather than char **, so we need to update the parser functions a little. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: Move creation of /proc/cpu out of alignment.cRussell King
Always creating this directory avoids other users having to jump through silly hoops when they want to share this directory. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: move LED support code out of arch/arm/kernel/time.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: remove old RTC supportRussell King
All RTC drivers have been converted to rtclib, so the old code providing the set_rtc function pointer, save_time_delta() and restore_time_delta() functions is obsolete. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: Add caller information to ioremapRussell King
This allows the procfs vmallocinfo file to show who created the ioremap regions. Note: __builtin_return_address(0) doesn't do what's expected if its used in an inline function, so we leave __arm_ioremap callers in such places alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: 5937/1: Add support for EP9315 based Snapper CL15 boardRyan Mallon
Add support for Bluewater Systems EP9315 based Snapper CL15 single board computer module. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: dma-mapping: fix for speculative prefetchingRussell King
ARMv6 and ARMv7 CPUs can perform speculative prefetching, which makes DMA cache coherency handling slightly more interesting. Rather than being able to rely upon the CPU not accessing the DMA buffer until DMA has completed, we now must expect that the cache could be loaded with possibly stale data from the DMA buffer. Where DMA involves data being transferred to the device, we clean the cache before handing it over for DMA, otherwise we invalidate the buffer to get rid of potential writebacks. On DMA Completion, if data was transferred from the device, we invalidate the buffer to get rid of any stale speculative prefetches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: remove dmac_clean_range and dmac_inv_rangeRussell King
These are now unused, and so can be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: provide per-cpu type map/unmap functionsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: simplify dma_cache_maint_pageRussell King
dma_cache_maint_contiguous is now simple enough to live inside dma_cache_maint_page, so move it there. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: move selection of page ops out of dma_cache_maint_contiguousRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: push buffer ownership down into dma-mapping.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>