aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-03powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dtsMartyn Welch
Adding use of newly added Epson RTX-8581 real-time clock driver to GE Fanuc SBC610's dts file and adding driver to default config. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Fix compile warnings in mpc85xx_mds.cKumar Gala
arch/powerpc/platforms/85xx/mpc85xx_mds.c: In function 'board_fixups': arch/powerpc/platforms/85xx/mpc85xx_mds.c:244: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' arch/powerpc/platforms/85xx/mpc85xx_mds.c:250: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Add support for SMP initializationKumar Gala
Added 85xx specifc smp_ops structure. We use ePAPR style boot release and the MPIC for IPIs at this point. Additionally added routines for secondary cpu entry and initializtion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: minor head_fsl_booke.S cleanupKumar Gala
Removed unused branch labels Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Better setup of boot page TLB entryTrent Piepho
The initial TLB mapping for the kernel boot didn't set the memory coherent attribute, MAS2[M], in SMP mode. If this code supported booting a secondary processor, which it doesn't yet, but if it did, then when a secondary processor boots, it would probably signal the primary processor by setting a variable called something like __secondary_hold_acknowledge. However, due to the lack of the M bit, the primary processor would not snoop the transaction (even if a transaction were broadcast). If primary CPU's L1 D-cache had a copy, it would not be flushed and the CPU would never see the ack. Which would have resulted in the primary CPU spinning for a long time, perhaps a full second before it gives up, while it would have waited for the ack from the secondary CPU that it wouldn't have been able to see because of the stale cache. The value of MAS2 for the boot page TLB1 entry is a compile time constant, so there is no need to calculate it in powerpc assembly language. Also, from the MPC8572 manual section 6.12.5.3, "Bits that represent offsets within a page are ignored and should be cleared." Existing code didn't clear them, this code does. The same when the page of KERNELBASE is found; we don't need to use asm to mask the lower 12 bits off. In the code that computes the address to rfi from, don't hard code the offset to 24 bytes, but have the assembler figure that out for us. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Add SPE/EFP math emulation for E500v1/v2 processors.Liu Yu
This patch add the handlers of SPE/EFP exceptions. The code is used to emulate float point arithmetic, when MSR(SPE) is enabled and receive EFP data interrupt or EFP round interrupt. This patch has no conflict with or dependence on FP math-emu. The code has been tested by TestFloat. Now the code doesn't support SPE/EFP instructions emulation (it won't be called when receive program interrupt), but it could be easily added. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Remove redundant 'ret'Liu Yu
FP_DECL_EX is already used, so ret is redundant. And FP_SET_EXCEPTION will add status into return value. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Adopt new version of _FP_CHOOSENANLiu Yu
Move to using the same macro definition for _FP_CHOOSENAN as s390, sh, sparc32/64. The original author didn't understand this and matched what sparc64 was doing and they have updated to this definition. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Fix single float point division bugLiu Yu
PowerPC float point division emulation is derived from gcc. I reported this problem on gcc maillist and got this reply: http://gcc.gnu.org/ml/gcc/2008-03/msg00543.html Since UDIV_NEEDS_NORMALIZATION is not used by kernel, we should use _FP_DIV_MEAT_1_udiv_norm to make sure the single float point is normalized before udiv_qrnnd. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Remove unncessary SPE related compiler flagKumar Gala
After testing of various compiler flag combinations by Nate Case it was determined that -mabi=no-spe has no impact on the compiler generating SPE instructions. Only -mno-spe and -mspe=no do. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03hvc_console: Always schedule resize work on resizeHendrik Brueckner
The test to check for a new winsize runs out-of-sync with the underlying tty. After a tty has been released and initialized again, the winsize might differ between the tty and the hp struct. The solution is to simply remove the check and always schedule the resize work. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Make open count variables signed in hvcs/hvsi/hvc_consoleroel kluin
Otherwise the tests for count < 0 will never be true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03drivers/hvc: Add missing of_node_putNicolas Palix
of_node_put is needed before discarding a value received from of_find_node_by_name, e.g., in error handling code or when the device node is no longer used. The semantic match that catches the bug is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression struct device_node *n; position p1, p2; statement S1,S2; expression E,E1; expression *ptr != NULL; @@ ( if (!(n@p1 = of_find_node_by_name(...))) S1 | n@p1 = of_find_node_by_name(...) ) <... when != of_node_put(n) when != if (...) { <+... of_node_put(n) ...+> } when != true !n || ... when != n = E when != E = n if (!n || ...) S2 ...> ( return \(0\|<+...n...+>\|ptr\); | return@p2 ...; | n = E1 | E1 = n ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Nicolas Palix <npalix@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03of/gpio: Implement of_get_gpio_flags()Anton Vorontsov
This adds a new function, of_get_gpio_flags, which is like of_get_gpio(), but accepts a new "flags" argument. This new function will be used by the drivers that need to retrieve additional GPIO information, such as active-low flag. Also, this changes the default ("simple") .xlate routine to warn about bogus (< 2) #gpio-cells usage: the second cell should always be present for GPIO flags. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc/macintosh: Fix unsigned check in smu_sat_get_sdb_partition()roel kluin
i2c_smbus_read_word_data() returns a s32, which may be negative but unsigned len cannot be negative. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03of/i2c: Fill the archdata for I2C devicesAnton Vorontsov
For I2C devices we just setting the node pointer in the archdata. This is needed so that the I2C devices could find their OF tree nodes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc and sparc: Introduce dev_archdata node accessorsAnton Vorontsov
The name of the device_node field differ across the platforms, so we have to implement inlined accessors. This is needed to avoid ugly #ifdef in the generic code. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc/BSR: Support multiple OF-node description of BSRSonny Rao
This adds support for multiple BSR nodes in the OF device tree. Previously, the BSR driver only supported a single OF node describing a BSR. Apparently when an LPAR is set to use "all system resources" the BSR appears as a single node, but when it is handed out in pieces, each 8 byte piece gets its own node. So, this keeps a list of BSR devices instead of the array and includes all nodes. Also, this makes the code be more inclusive of what BSR devices we accept by only checking compatibility and not the device name property (which might change in the future versions of BSR). Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc/ibmebus: Get rid of the IRQ mapping in ibmebus_free_irq()Sebastien Dugue
ibmebus_free_irq() frees the IRQ but does not remove its mapping, which results in stale entries in the map. This fixes it by adding a call to irq_dispose_mapping() in ibmebus_free_irq(). Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in commit b1fceac2 ("x86: remove unnecessary memset and NULL check after alloc_bootmem()"), alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Add sync_*_for_* to dma_opsBecky Bruce
We need to swap these out once we start using swiotlb, so add them to dma_ops. Create CONFIG_PPC_NEED_DMA_SYNC_OPS Kconfig option; this is currently enabled automatically if we're CONFIG_NOT_COHERENT_CACHE. In the future, this will also be enabled for builds that need swiotlb. If PPC_NEED_DMA_SYNC_OPS is not defined, the dma_sync_*_for_* ops compile to nothing. Otherwise, they access the dma_ops pointers for the sync ops. This patch also changes dma_sync_single_range_* to actually sync the range - previously it was using a generous dma_sync_single. dma_sync_single_* is now implemented as a dma_sync_single_range with an offset of 0. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Allow the max stack trace depth to be configuredJohannes Berg
On my screen, when something crashes, I only have space for maybe 16 functions of the stack trace before the information above it scrolls off the screen. It's easy to hack the kernel to print out only that much, but it's harder to remember to do it. This introduces a config option for it so that I can keep the setting in my config. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Use RCU based pte freeing mechanism for all powerpcKumar Gala
Refactor the RCU based pte free code that was used on ppc64 to be used on all powerpc. Additionally refactor pte_free() & pte_free_kernel() into common code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Add a local_flush_tlb_page to handle kmap_atomic invalidatesKumar Gala
The tlb invalidates in kmap_atomic/kunmap_atomic can be called from IRQ context, however they are only local invalidates (on the processor that the kmap was called on). In the future we want to use IPIs to do tlb invalidates this causes issue since flush_tlb_page() is considered a broadcast invalidate. Add local_flush_tlb_page() as a non-broadcast invalidate and use it in kmap_atomic() since we don't have enough information in the flush_tlb_page() call to determine its local. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: hash_page_sync should only be used on SMP & STD_MMU_32Kumar Gala
Clean up the ifdefs so we only use hash_page_sync if we have CONFIG_SMP && CONFIG_PPC_STD_MMU_32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Fix ppc32 mm_struct CPU tracking in SMPBenjamin Herrenschmidt
The 32-bit hash code didn't need it so far so we don't update mm->cpu_vm_mask on context switch. This however will break when we merge the RCU based page table freeing patch and other upcoming 32-bit embedded SMP work, so this adds the update. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Add MSR[CE, DE] to the MSR bits we print on show_regs()Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03Merge branch 'merge'Paul Mackerras
2008-12-03powerpc: Fix dma_map_sg() cache flushing on non coherent platformsBenjamin Herrenschmidt
On PowerPC 4xx or other non cache-coherent platforms, we lost the appropriate cache flushing in dma_map_sg() when merging the 32 and 64-bit DMA code (commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d, "powerpc: Merge 32 and 64-bit dma code"). This restores it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] hpwdt: Fix kdump when using hpwdt [WATCHDOG] hpwdt: set the mapped BIOS address space as executable [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsets [WATCHDOG] iTCO_wdt : correct status clearing [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards [WATCHDOG] fix mtx1_wdt compilation failure
2008-12-02Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: pre-allocate bulk-read buffer UBIFS: do not allocate too much UBIFS: do not print scary memory allocation warnings UBIFS: allow for gaps when dirtying the LPT UBIFS: fix compilation warnings MAINTAINERS: change UBI/UBIFS git tree URLs UBIFS: endian handling fixes and annotations UBIFS: remove printk
2008-12-02Merge branch 'kvm-updates/2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: avoid creation of unreachable pages in the shadow KVM: ppc: stop leaking host memory on VM exit KVM: MMU: fix sync of ptes addressed at owner pagetable KVM: ia64: Fix: Use correct calling convention for PAL_VPS_RESUME_HANDLER KVM: ia64: Fix incorrect kbuild CFLAGS override KVM: VMX: Fix interrupt loss during race with NMI KVM: s390: Fix problem state handling in guest sigp handler
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix offset calculation in compute_size() rtc: rtc-starfire fixes
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) MAINTAINERS: add netdev to ATM ATM: horizon, fix hrz_probe fail path pppol2tp: Add missing sock_put() in pppol2tp_release() net: Fix soft lockups/OOM issues w/ unix garbage collector macvlan: don't broadcast PAUSE frames to macvlan devices Phonet: fix oops in phonet_address_del() on non-Phonet device netfilter: ctnetlink: fix GFP_KERNEL allocation under spinlock sungem: Fix PCS_MIICTRL register write in gem_init_phy(). net: make skb_truesize_bug() call WARN() net: hp-plus uses eip_poll net/wireless/reg.c: fix bad WARN_ON in if statement ath5k: disable beacon filter when station is not associated ath5k: fix Security issue in DebugFS part of ath5k ath9k: correct expected max RX buffer size ath9k: Fix SW-IOMMU bounce buffer starvation mac80211 : Fix setting ad-hoc mode and non-ibss channel iwlagn: fix DMA sync phylib: Add Vitesse VSC8221 SGMII PHY rose: zero length frame filtering in af_rose.c bridge: netfilter: fix update_pmtu crash with GRE ...
2008-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for 2.6.28-rc7 macfb: Do not overflow fb_fix_screeninfo.id
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: alim15x3: fix sparse warning ide: remove dead code from drive_is_ready() ide: fix build for DEBUG_PM ide: respect current DMA setting during resume ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] amd74xx: workaround unreliable AltStatus register for nVidia controllers ide: fix the ide_release_lock imbalance
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] stex: switch to block timeout [SCSI] make scsi_eh_try_stu use block timeout [SCSI] megaraid_sas: switch to block timeout [SCSI] ibmvscsi: switch to block timeout [SCSI] aacraid: switch to block timeout [SCSI] zfcp: prevent double decrement on host_busy while being busy [SCSI] zfcp: fix deadlock between wq triggered port scan and ERP [SCSI] zfcp: eliminate race between validation and locking [SCSI] zfcp: verify for correct rport state before scanning for SCSI devs [SCSI] zfcp: returning an ERR_PTR where a NULL value is expected [SCSI] zfcp: Fix opening of wka ports [SCSI] zfcp: fix remote port status check [SCSI] fc_transport: fix old bug on bitflag definitions [SCSI] Fix hang in starved list processing
2008-12-02MN10300: Fix application of kernel module relocationsMark Salter
This fixes the MN10300 kernel module linking to match the toolchain. RELA relocs don't use the value at the location being relocated. This has been working because the tools always leave the value at the target location cleared. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02sgi-gru: call fs_initcall() if statically linkedDean Nelson
If xpc.ko and gru.ko are both statically linked into the kernel, then xpc_init() can get called before gru_init() and make a call to one of the gru's exported functions before the gru has initialized itself. The end result is a NULL dereference. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02powerpc: Use physical cpu id when setting the processor affinityKumar Gala
In the CONFIG_SMP case the irq_choose_cpu() code was returning back a logical cpu id not the physical id. We were writing that directly into the HW register. We need to be calling get_hard_smp_processor_id() so irq_choose_cpu() always returns a physical cpu id. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02vmscan: evict streaming IO firstRik van Riel
Count the insertion of new pages in the statistics used to drive the pageout scanning code. This should help the kernel quickly evict streaming file IO. We count on the fact that new file pages start on the inactive file LRU and new anonymous pages start on the active anon list. This means streaming file IO will increment the recent scanned file statistic, while leaving the recent rotated file statistic alone, driving pageout scanning to the file LRUs. Pageout activity does its own list manipulation. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: Gene Heskett <gene.heskett@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02bdi: register sysfs bdi device only once per queueKay Sievers
Devices which share the same queue, like floppies and mtd devices, get registered multiple times in the bdi interface, but bdi accounts only the last registered device of the devices sharing one queue. On remove, all earlier registered devices leak, stay around in sysfs, and cause "duplicate filename" errors if the devices are re-created. This prevents the creation of multiple bdi interfaces per queue, and the bdi device will carry the dev_t name of the block device which is the first one registered, of the pool of devices using the same queue. [akpm@linux-foundation.org: add a WARN_ON so we know which drivers are misbehaving] Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02nfsd: fix vm overcommit crash fix #2Junjiro R. Okajima
The previous patch from Alan Cox ("nfsd: fix vm overcommit crash", commit 731572d39fcd3498702eda4600db4c43d51e0b26) fixed the problem where knfsd crashes on exported shmemfs objects and strict overcommit is set. But the patch forgot supporting the case when CONFIG_SECURITY is disabled. This patch copies a part of his fix which is mainly for detecting a bug earlier. Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Junjiro R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02m68k: Update defconfigs for 2.6.28-rc7Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-12-02alim15x3: fix sparse warningHannes Eder
Fix this sparse warning: drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: remove dead code from drive_is_ready()Bartlomiej Zolnierkiewicz
We guarantee 400ns delay at the time of issuing the command. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: fix build for DEBUG_PMBartlomiej Zolnierkiewicz
Also while at it: * Drop unused arguments from ide_complete_power_step(). * Move DEBUG_PM printk() from ide_end_drive_cmd() to ide_complete_power_step(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: respect current DMA setting during resumeBartlomiej Zolnierkiewicz
Respect current DMA setting during resume, otherwise PIO timings may get destroyed if host uses shared PIO/MWDMA timings. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[]Bartlomiej Zolnierkiewicz
Should fix kernel.org bug #10225: http://bugzilla.kernel.org/show_bug.cgi?id=10225 Reported-by: Matthias B. <haferfrost@web.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02amd74xx: workaround unreliable AltStatus register for nVidia controllersBartlomiej Zolnierkiewicz
It seems that on some nVidia controllers using AltStatus register can be unreliable so default to Status register if the PCI device is in Compatibility Mode. In order to achieve this: * Add ide_pci_is_in_compatibility_mode() inline helper to <linux/ide.h>. * Add IDE_HFLAG_BROKEN_ALTSTATUS host flag and set it in amd74xx host driver for nVidia controllers in Compatibility Mode. * Teach actual_try_to_identify() and drive_is_ready() about the new flag. This fixes the regression caused by removal of CONFIG_IDEPCI_SHARE_IRQ config option in 2.6.25 and using AltStatus register unconditionally when available (kernel.org bugs #11659 and #10216). [ Moreover for CONFIG_IDEPCI_SHARE_IRQ=y (which is what most people and distributions use) it never worked correctly. ] Thanks to Remy LABENE and Lars Winterfeld for help with debugging the problem. More info at: http://bugzilla.kernel.org/show_bug.cgi?id=11659 http://bugzilla.kernel.org/show_bug.cgi?id=10216 Reported-by: Remy LABENE <remy.labene@free.fr> Tested-by: Remy LABENE <remy.labene@free.fr> Tested-by: Lars Winterfeld <lars.winterfeld@tu-ilmenau.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:07:32 +0000