aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-23[POWERPC] FSL: Add support for PCI-X controllersKumar Gala
Some set of 85xx platforms have PCI-X controllers. The old arch/ppc code setup these controllers and we haven't moved it over to arch/powerpc. We use the PCI-X Capabilties to know if we are in PCI-X mode instead of the Global Utilities PORDEVSR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHBKumar Gala
For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P bridge registers properly. Make sure they get setup based on what the struct pci_controller got from the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Provide ability to setup P2P bridge registers from struct resourceKumar Gala
We need the ability to set P2P bridge registers to properly setup the virtual P2P bridges that exist in PCIe controllers for some of the embedded setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Removed setup_indirect_pci_nomapKumar Gala
We don't use setup_indirect_pci_nomap in arch/powerpc and it appears the users that needed it from arch/ppc are now using setup_indirect_pci. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDSKumar Gala
The newer Arcadia boards for CDS have an FPGA that shows up on PCI however isn't a real PCI device. Add a quirk to just ignore the FPGA. This is based on the following patch from Andy & York: http://ozlabs.org/pipermail/linuxppc-dev/2007-February/032042.html Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connectedKumar Gala
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI node for mpc8568mds boardRoy Zang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Use Freescale pci/pcie common code for 85xx boardsRoy Zang
Switch the 85xx platform over to using the FSL generic PCI code. This gets ups PCIe support in addition to base PCI support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Update PCI nodes in the 83xx/85xx boards device treeRoy Zang
Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add 8548 CDS PCI express controller node and PCI-X device nodeRoy Zang
Add 8548 CDS PCI express controller node and PCI-X device node. The current dts file is suitable for 8548 Rev 2.0 board with Arcadia 3.1. This kind of board combination is the most popular. Used the following compatible properties: PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] FSL: Cleanup how we detect if we are a PCIe controllerKumar Gala
Use the PCI capabilities to determine if we are PCIe PHB. Also use PPC_INDIRECT_TYPE_NO_PCIE_LINK since the Freescale PCIe controllers will lock the system if they don't have link and you try to do a config access to anything but the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no linkKumar Gala
Added PPC_INDIRECT_TYPE_NO_PCIE_LINK flag to the indirect pci handling code to ensure that we don't talk to any device other than the PHB if we don't have PCIe link. Some controllers will lockup if they try to do a config cycle to any device on the bus except the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add the ability to find PCI capabilities early onKumar Gala
Added early_find_capability that wraps pci_bus_find_capability and uses fake_pci_bus() to allow us to call it before we've fully setup the pci_controller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xxZang Roy-r61911
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and PCIe on 85xx/86xx. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Create common fsl pci/e files based on 86xx platformsRoy Zang
Move arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h as the base to unify 83xx/85xx/86xx pci and pcie. Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option. The code still works for 86xx platforms. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-22Linux 2.6.23-rc1Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: Rename CF Makefile variable in vdsoAndi Kleen
This avoids a conflict with sparse builds. Reported by Alexey Dobriyan, fix suggested by Al Viro Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-229p: Don't use binary sysctl numbers.Eric W. Biederman
The recent 9p commit: bd238fb431f31989898423c8b6496bc8c4204a86 that supposedly only moved files also introduced a new 9p sysctl interface that did not properly register it's sysctl binary numbers. And since it was only for debugging clearly did not need a binary fast path in any case. So this patch just remove the binary numbers. See Documentation/sysctl/ctl_unnumbered.txt for more details. While I was at it I cleaned up the sysctl initializers a little as well so there is less to read. Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Documentation: Fix a mispelt "probably" in SubmittingPatches.Linus Nilsson
Fix a typo in SubmittingPatches where "probably" was spelt "probabally". Signed-off-by: Linus Nilsson <lajnold@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22DocBook: Change a headline in kernel-locking to list all three main types of ↵Linus Nilsson
locking. Change a headline to reflect that there are three main types of kernel locking, not two. Signed-off-by: Linus Nilsson <lajnold@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Support small QP queues IB/ehca: Make internal_create/destroy_qp() static IB/ehca: Move ehca2ib_return_code() out of line IB/ehca: Generate async event when SRQ limit reached IB/ehca: Support large page MRs IB/mlx4: Fix error path in create_qp_common() mlx4_core: Change command token on timeout IB/mthca: Change command token on timeout IB/ipath: Remove ipath_layer dead code IB/mlx4: Fix leaks in __mlx4_ib_modify_qp
2007-07-22take declarations of enable_irq() et.al. to linux/interrupt.hAl Viro
Now that the last inlined instances are gone, all that is left to do is turning disable_irq_nosync on arm26 and m68k from defines to aliases and we are all set - we can make these externs in linux/interrupt.h uncoditional and kill remaining instances in asm/irq.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] libsas: make ATA functions selectable by a config option [SCSI] bsg: unexport sg v3 helper functions [SCSI] bsg: fix bsg_unregister_queue [SCSI] bsg: make class backlinks [SCSI] 3w-9xxx: add support for 9690SA [SCSI] bsg: fix bsg_register_queue error path [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275. [SCSI] libsas: fix scr_read/write users and update the libata documentation [SCSI] mpt fusion: update Kconfig help [SCSI] scsi_transport_sas: add destructor for bsg [SCSI] iscsi_tcp: buggered kmalloc() [SCSI] qla2xxx: Update version number to 8.02.00-k2. [SCSI] qla2xxx: Add ISP25XX support. [SCSI] qla2xxx: Use pci_try_set_mwi(). [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces. [SCSI] qla2xxx: Re-factor isp_operations to static structures. [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling. [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration. [SCSI] qla2xxx: Generalize iIDMA support. [SCSI] qla2xxx: Generalize FW-Interface-2 support. ...
2007-07-22[SCSI] libsas: make ATA functions selectable by a config optionJames Bottomley
Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits) [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410 [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h [ARM] 4521/2: S3C: Reorganise VA mapping headers [ARM] 4520/1: S3C: Remove old VA values from static map [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h [ARM] 4518/1: S3C: Rename watchdog configuration options [ARM] 4517/1: S3C: Fix debug macros for ARM926 output [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926 [ARM] 4515/1: S3C: Move uncompress code to plat-s3c [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support [ARM] 4510/1: S3C: split debug-macro support into plat-s3c [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c [ARM] 4461/1: MXC platform and i.MX31ADS core support [ARM] 4507/1: pxa2xx clock_event_device [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later ...
2007-07-22Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Convert from struct class_device to struct device leds: leds-gpio for ngw100 leds: Add warning printks in error paths leds: Fix trigger unregister_simple if register_simple fails leds: Use menuconfig objects II - LED leds: Teach leds-gpio to handle timer-unsafe GPIOs leds: Add generic GPIO LED driver
2007-07-22Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: leds: cr_bllcd.c: build fix backlight: Convert from struct class_device to struct device backlight: Fix order of Kconfig entries
2007-07-22Merge branch 'audit.b39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b39' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] get rid of AVC_PATH postponed treatment [PATCH] allow audit filtering on bit & operations [PATCH] audit: fix broken class-based syscall audit [PATCH] Make IPC mode consistent
2007-07-22Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Clean up duplicate includes in drivers/macintosh/ [POWERPC] Quiet section mismatch warning on pcibios_setup [POWERPC] init and exit markings for hvc_iseries [POWERPC] Quiet section mismatch in hvc_rtas.c [POWERPC] Constify of_platform_driver match_table [POWERPC] hvcs: Make some things static and const [POWERPC] Constify of_platform_driver name [POWERPC] MPIC protected sources [POWERPC] of_detach_node()'s device node argument cannot be const [POWERPC] Fix ARCH=ppc builds [POWERPC] mv64x60: Use mutex instead of semaphore [POWERPC] Allow smp_call_function_single() to current cpu [POWERPC] Allow exec faults on readable areas on classic 32-bit PowerPC [POWERPC] Fix future firmware feature fixups function failure [POWERPC] fix showing xmon help [POWERPC] Make xmon_write accept a const buffer [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option. [POWERPC] cell: CONFIG_SPE_BASE is a typo
2007-07-22x86_64: Fix xen section warningsAndi Kleen
Fix WARNING: vmlinux.o(.data+0x99): Section mismatch: reference to .init.text:xen_start_kernel (between 'startup_xen' and 'boot_gdt_descr') Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: Fix paravirt compilationAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22fix broken handling of port=... in NFS option parsingAl Viro
Obviously broken on little-endian; fortunately, the option is not frequently used... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Hey, sparse is wonderful, but even better than sparse is having people like Al that actually _run_ it and fix bugs using it. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22KVM: Require CONFIG_ANON_INODESAvi Kivity
Found by Sebastian Siewior and randconfig. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (77 commits) ACPI: Populate /sys/firmware/acpi/tables/ ACPI: create CONFIG_ACPI_DEBUG_FUNC_TRACE ACPI: update ACPI proc I/F removal schedule ACPI: update feature-removal-schedule.txt, /sys/firmware/acpi/namespace is gone ACPI: export ACPI events via acpi_mc_group multicast group ACPI: fix empty macros found by -Wextra ACPI: drivers/acpi/pci_link.c: lower printk severity sony-laptop: Fix event reading in sony-laptop sony-laptop: Add Vaio FE to the special init sequence sony-laptop: Make the driver use MSC_SCAN and a setkeycode and getkeycode key table. sony-laptop: Invoke _INI for SNC devices that provide it sony-laptop: Add support for recent Vaios Fn keys (C series for now) sony-laptop: map wireless switch events to KEY_WLAN sony-laptop: add new SNC handlers ACPI: thinkpad-acpi: add locking to brightness subdriver ACPI: thinkpad-acpi: bump up version to 0.15 ACPI: thinkpad-acpi: make EC-based thermal readings non-experimental ACPI: thinkpad-acpi: make sure DSDT TMPx readings don't return +128 ACPI: thinkpad-acpi: react to Lenovo ThinkPad differences in hot key ACPI: thinkpad-acpi: allow use of CMOS NVRAM for brightness control ...
2007-07-22x86_64: Share msidef.h and hypertransport.h includes with i386Andi Kleen
They are identical Indirectly pointed out by Thomas Gleixner Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: Remove outdated comment in boot decompressor MakefileAndi Kleen
64bit code in there now since some time. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: Squash initial_code modpost warningsAndi Kleen
Get rid of warnings like WARNING: vmlinux.o(.bootstrap.text+0x1a8): Section mismatch: reference to .init.text:x86_64_start_kernel (between 'initial_code' and 'init_rsp') - Move initialization code into .text.head like i386 because modpost knows about this already - Mark initial_code .initdata Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: fix section mismatch warning in init.cSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x188ea): Section mismatch: reference to .init.text:__alloc_bootmem_core (between 'alloc_bootmem_high_node' and 'get_gate_vma') alloc_bootmem_high_node() is only used from __init scope so declare it __init. And in addition declare the weak variant __init too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: fix section mismatch warning in hpet.cSam Ravnborg
Fix following warnings: WARNING: vmlinux.o(.text+0x945e): Section mismatch: reference to .init.text:__set_fixmap (between 'hpet_arch_init' and 'hpet_mask_rtc_irq_bit') WARNING: vmlinux.o(.text+0x9474): Section mismatch: reference to .init.text:__set_fixmap (between 'hpet_arch_init' and 'hpet_mask_rtc_irq_bit') hpet_arch_init is only used from __init context so mark it __init. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22i386: Fix the K7 NMI watchdog checkbitBjörn Steinbrink
The performance counters on K7 are only 48 bits wide, so using bit 63 to check if the counter overflowed is wrong. Let's use bit 47 instead. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22i386: Use patchable lock prefix in set_64bitAndi Kleen
Previously lock was unconditionally used, but shouldn't be needed on UP systems. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22i386: Handle P6s without performance counters in nmi watchdogAndi Kleen
I got an oops while booting a 32bit kernel on KVM because it doesn't implement performance counters used by the NMI watchdog. Handle this case. Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86: Replace NSC/Cyrix specific chipset access macros by inlined functions.Juergen Beisert
Due to index register access ordering problems, when using macros a line like this fails (and does nothing): setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); With inlined functions this line will work as expected. Note about a side effect: Seems on Geode GX1 based systems the "suspend on halt power saving feature" was never enabled due to this wrong macro expansion. With inlined functions it will be enabled, but this will stop the TSC when the CPU runs into a HLT instruction. Kernel output something like this: Clocksource tsc unstable (delta = -472746897 ns) This is the 3rd version of this patch. - Adding missed arch/i386/kernel/cpu/mtrr/state.c Thanks to Andres Salomon - Adding some big fat comments into the new header file Suggested by Andi Kleen AK: fixed x86-64 compilation Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: x86_64 - Use non locked version for local_cmpxchg()Mathieu Desnoyers
local_cmpxchg() should not use any LOCK prefix. This change probably got lost in the move to cmpxchg.h. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22i386: Do not include other cpus' interrupt 0 in nmi_watchdogKeith Owens
kstat_irqs(0) includes the count of interrupt 0 from all cpus, not just the current cpu. The updated interrupt 0 on other cpus can stop the nmi_watchdog from tripping, so only include the current cpu's int 0. Signed-off-by: Keith Owens <kaos@ocs.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22i386: Tune AMD Fam10h/11h like K8Andi Kleen
This mainly changes the nops for alternative, so not very revolutionary. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22x86_64: Set K8 CPUID flag for K8/Fam10h/Fam11hAndi Kleen
Previously this flag was only used on 32bit, but some shared code can use it now. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 12:50:44 +0000