aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-29powerpc: Drop redundant machine type print in show_cpuinfoBecky Bruce
For many of the embedded boards, "model" and "Machine" are printing the same thing; remove the redundant code and allow the generic show_cpuinfo to print the model information. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-29powerpc/fsl_soc: remove mpc83xx_wdt codeAnton Vorontsov
mpc83xx_wdt is the OF driver now, so we don't need fsl_soc constructor. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-25serial/mpc52xx_uart: remove code associated with !CONFIG_PPC_MERGEKumar Gala
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove the dead code associated with !CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23powerpc: Move 8xxx GPIO Kconfig under the platform menuKumar Gala
The initial patch had the option at the top level which wasn't quite right. Moving under the platform options is a bit better. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23powerpc/86xx: Introduce a generic mpc86xx_defconfigKumar Gala
Introduced a mpc86xx_defconfig that enables all 86xx boards and moved all other 86xx related defconfigs under configs/86xx to match 83xx and 85xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23powerpc/83xx: Add missing cell-index to dma-channel device nodesKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23powerpc: convert CONFIG_PPC_MERGE to CONFIG_PPC for legacy io checksKumar Gala
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use CONFIG_PPC instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23powerpc: gpio driver for mpc8349/8572/8610 and compatiblePeter Korsgaard
Structured similar to the existing QE GPIO support. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-21Merge branch 'powerpc-next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2008-09-21Merge branch 'next' of ↵Paul Mackerras
ssh://master.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx
2008-09-19cpm_uart: Pass actual dev ptr to dma_* in ucc and cpm_uart serialBecky Bruce
We're currently passing NULL, and really shouldn't be. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-19powerpc/fsl-booke: Fixup 64-bit PTE reading for SMP supportKumar Gala
We need to create a false data dependency to ensure the loads of the pte are done in the right order. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-18powerpc: Fix build warnings introduced by PMC support on 32-bitKumar Gala
arch/powerpc/kernel/sysfs.c:197:7: warning: "CONFIG_6xx" is not defined arch/powerpc/kernel/sysfs.c:141: warning: 'run_on_cpu' defined but not used Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-17powerpc: add SSI-to-DMA properties to Freescale MPC8610 HPCD device treeTimur Tabi
Add the fsl,playback-dma and fsl,capture-dma properties to the Freescale MPC8610 HPCD device tree. These properties connect the SSI nodes to the DMA nodes for the DMA channels that the SSI should use. Also update the ssi.txt documentation. These properties will be needed when the ASoC V2 version of the Freescale MPC8610 device drivers are merged into the mainline. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc/cpm1: Fix race condition in CPM1 GPIO library.Jochen Friedrich
The CPM1 GPIO library code uses the non thread-safe clrbits32/setbits32 macros. This patch protects them with a spinlock. Based on the CPM2 patch from Laurent Pinchart <laurentp@cse-semaphore.com>, commit 639d64456e20cbfc866b18dc03cf9f9babc9c7cd. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Default configuration for GE Fanuc SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Board support for GE Fanuc SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc/sbc8560: fix compile warning on CPM pin arrayPaul Gortmaker
This is just a parallel of a5dc66e2ab2e2cf641346b056a69a67cfcf9458c applied to the sbc8560 board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16math-emu: Add support for reporting exact invalid exceptionKumar Gala
Some architectures (like powerpc) provide status information on the exact type of invalid exception. This is pretty straight forward as we already report invalid exceptions via FP_SET_EXCEPTION. We add new flags (FP_EX_INVALID_*) the architecture code can define if it wants the exact invalid exception reported. We had to split out the INF/INF and 0/0 cases for divide to allow reporting the two invalid forms properly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net>
2008-09-16math-emu: Fix compiler warningsKumar Gala
Fix warnings of the form: arch/powerpc/math-emu/fsubs.c:15: warning: 'R_f1' may be used uninitialized in this function arch/powerpc/math-emu/fsubs.c:15: warning: 'R_f0' may be used uninitialized in this function Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc/85xx: fix build warning, remove silly castBecky Bruce
This fixes a build warning when PHYS_64BIT is enabled, and removes an unnecessary cast to phys_addr_t (the variable being cast is already a phys_addr_t) Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc/83xx: mpc836x_mds: add support for the nor flashAnton Vorontsov
This patch adds the localbus node, moves the bcsr node into the localbus node, and adds the flash node. Also enable MTD support in the defconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16serial/cpm_uart: Remove dead Kconfig optionsKumar Gala
With the change to device tree based setup we no longer need the explicit Kconfig options for each SCC{1,4} or SMC{1,2} port. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Add support for mpc8247 based board MGCOGE from keymile.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Add support for the MPC852 based mgsuvd board from keymile.Heiko Schocher
Supported SMC1 (serial console), SCC3 Ethernet (10Mbps hdx). Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-15powerpc: Fix major revision number for Freescale coresMartin Langer
Some 74xx cores by Freescale are using the configuration field instead of the major revision field for their revision number. This corrects the wrong behaviour for those ppc cores including my one. There is a reference document at Freecale. It describes the PVR register. This is based on that pdf. You can find the document at: http://www.freescale.com/files/archives/doc/support_info/PPCPVR.pdf Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Clean up hugepage pagetable allocation for powerpc with 16G pagesDavid Gibson
There is a small bug in the handling of 16G hugepages recently added to the kernel. This doesn't cause a crash or other user-visible problems, but it does mean that more levels of pagetable are allocated than makes sense for 16G pages. The hugepage pagetables for the 16G pages are allocated much lower in the pagetable tree than they should be, with the intervening levels allocated with full pmd and pud pages which will only ever have one entry filled in. This corrects this problem, at the same time cleaning up the handling of which level 64k versus 16M hugepage pagetables are allocated at. The new way of formatting the tests should be more robust against changes in pagetable structure, or any newly added hugepage sizes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Make the irq reverse mapping radix tree locklessSebastien Dugue
The radix trees used by interrupt controllers for their irq reverse mapping (currently only the XICS found on pSeries) have a complex locking scheme dating back to before the advent of the lockless radix tree. This takes advantage of the lockless radix tree and of the fact that the items of the tree are pointers to a static array (irq_map) elements which can never go under us to simplify the locking. Concurrency between readers and writers is handled by the intrinsic properties of the lockless radix tree. Concurrency between writers is handled with a global mutex. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Separate the irq radix tree insertion and lookupSebastien Dugue
irq_radix_revmap() currently serves 2 purposes, irq mapping lookup and insertion which happen in interrupt and process context respectively. Separate the function into its 2 components, one for lookup only and one for insertion only. Fix the only user of the revmap tree (XICS) to use the new functions. Also, move the insertion into the radix tree of those irqs that were requested before it was initialized at said tree initialization. Mutual exclusion between the tree initialization and readers/writers is handled via a state variable (revmap_trees_allocated) set to 1 when the tree has been initialized and set to 2 after the already requested irqs have been inserted in the tree by the init path. This state is checked before any reader or writer access just like we used to check for tree.gfp_mask != 0 before. Finally, now that we're not any longer inserting nodes into the radix-tree in interrupt context, turn the GFP_ATOMIC allocations into GFP_KERNEL ones. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Rename PTE_SIZE to HPTE_SIZEBecky Bruce
It's the size of the hardware PTE; make that clear in the name. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Enforce a non-spe kernel build even on broken compilersThiemo Seufer
Those two are required on my fresh gcc 4.3.1. Signed-off-by: Thiemo Seufer <ths@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Use sys_pause for 32-bit pause entry pointChristoph Hellwig
sys32_pause is a useless copy of the generic sys_pause. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Make the 64-bit kernel as a position-independent executablePaul Mackerras
This implements CONFIG_RELOCATABLE for 64-bit by making the kernel as a position-independent executable (PIE) when it is set. This involves processing the dynamic relocations in the image in the early stages of booting, even if the kernel is being run at the address it is linked at, since the linker does not necessarily fill in words in the image for which there are dynamic relocations. (In fact the linker does fill in such words for 64-bit executables, though not for 32-bit executables, so in principle we could avoid calling relocate() entirely when we're running a 64-bit kernel at the linked address.) The dynamic relocations are processed by a new function relocate(addr), where the addr parameter is the virtual address where the image will be run. In fact we call it twice; once before calling prom_init, and again when starting the main kernel. This means that reloc_offset() returns 0 in prom_init (since it has been relocated to the address it is running at), which necessitated a few adjustments. This also changes __va and __pa to use an equivalent definition that is simpler. With the relocatable kernel, PAGE_OFFSET and MEMORY_START are constants (for 64-bit) whereas PHYSICAL_START is a variable (and KERNELBASE ideally should be too, but isn't yet). With this, relocatable kernels still copy themselves down to physical address 0 and run there. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Use LOAD_REG_IMMEDIATE only for constants on 64-bitPaul Mackerras
Using LOAD_REG_IMMEDIATE to get the address of kernel symbols generates 5 instructions where LOAD_REG_ADDR can do it in one, and will generate R_PPC64_ADDR16_* relocations in the output when we get to making the kernel as a position-independent executable, which we'd rather not have to handle. This changes various bits of assembly code to use LOAD_REG_ADDR when we need to get the address of a symbol, or to use suitable position-independent code for cases where we can't access the TOC for various reasons, or if we're not running at the address we were linked at. It also cleans up a few minor things; there's no reason to save and restore SRR0/1 around RTAS calls, __mmu_off can get the return address from LR more conveniently than the caller can supply it in R4 (and we already assume elsewhere that EA == RA if the MMU is on in early boot), and enable_64b_mode was using 5 instructions where 2 would do. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Make it possible to move the interrupt handlers away from the kernelPaul Mackerras
This changes the way that the exception prologs transfer control to the handlers in 64-bit kernels with the aim of making it possible to have the prologs separate from the main body of the kernel. Now, instead of computing the address of the handler by taking the top 32 bits of the paca address (to get the 0xc0000000........ part) and ORing in something in the bottom 16 bits, we get the base address of the kernel by doing a load from the paca and add an offset. This also replaces an mfmsr and an ori to compute the MSR value for the handler with a load from the paca. That makes it unnecessary to have a separate version of EXCEPTION_PROLOG_PSERIES that forces 64-bit mode. We can no longer use a direct branches in the exception prolog code, which means that the SLB miss handlers can't branch directly to .slb_miss_realmode any more. Instead we have to compute the address and do an indirect branch. This is conditional on CONFIG_RELOCATABLE; for non-relocatable kernels we use a direct branch as before. (A later change will allow CONFIG_RELOCATABLE to be set on 64-bit powerpc.) Since the secondary CPUs on pSeries start execution in the first 0x100 bytes of real memory and then have to get to wherever the kernel is, we can't use a direct branch to get there. Instead this changes __secondary_hold_spinloop from a flag to a function pointer. When it is set to a non-NULL value, the secondary CPUs jump to the function pointed to by that value. Finally this eliminates one code difference between 32-bit and 64-bit by making __secondary_hold be the text address of the secondary CPU spinloop rather than a function descriptor for it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Rearrange head_64.S to move interrupt handler code to the beginningPaul Mackerras
This rearranges head_64.S so that we have all the first-level exception prologs together starting at 0x100, followed by all the second-level handlers that are invoked from the first-level prologs, followed by other code. This doesn't make any functional change but will make following changes for relocatable kernel support easier. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Add support for dynamic reconfiguration memory in kexec/kdump kernelsChandru
Kdump kernel needs to use only those memory regions that it is allowed to use (crashkernel, rtas, tce, etc.). Each of these regions have their own sizes and are currently added under 'linux,usable-memory' property under each memory@xxx node of the device tree. The ibm,dynamic-memory property of ibm,dynamic-reconfiguration-memory node (on POWER6) now stores in it the representation for most of the logical memory blocks with the size of each memory block being a constant (lmb_size). If one or more or part of the above mentioned regions lie under one of the lmb from ibm,dynamic-memory property, there is a need to identify those regions within the given lmb. This makes the kernel recognize a new 'linux,drconf-usable-memory' property added by kexec-tools. Each entry in this property is of the form of a count followed by that many (base, size) pairs for the above mentioned regions. The number of cells in the count value is given by the #size-cells property of the root node. Signed-off-by: Chandru Siddalingappa <chandru@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Check rc of notifier chain for memory removeNathan Fontenot
The return code from invocation of the notifier for pSeries_reconfig_chain during update of the device tree is not checked. This causes writes to /proc/ppc64/ofdt to update memory properties (i.e. ibm,dyamic-reconfiguration-memory) to always return success, instead of the result of the notifier chain. This happens specifically when we remove/add memory from the device tree on machines using memory specified in the ibm,dynamic-reconfiguration-memory property of the device tree. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: New copy_4K_page()Mark Nelson
This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZMark Nelson
Add a new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, to be added to the 64bit powerpc chips that benefit from having dcbt and dcbz instructions used in their memory copy routines. This will be used in a subsequent patch that updates copy_4K_page(). The new bit is added to Cell, PPC970 and Power4 because they show better performance with the new copy_4K_page() when dcbt and dcbz instructions are used. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Fix duplicate test of MACIO_FLAG_SCCB_ONroel kluin
Evidently MACIO_FLAG_SCCA_ON was meant. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-10Merge branch 'linux-2.6'Paul Mackerras
2008-09-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix memmap=exactmap boot argument x86: disable static NOPLs on 32 bits xen: fix 2.6.27-rc5 xen balloon driver warnings
2008-09-09x86: fix memmap=exactmap boot argumentPrarit Bhargava
When using kdump modifying the e820 map is yielding strange results. For example starting with BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 0000000000093400 (usable) BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data) BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) and booting with args memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K resulted in: user-defined physical RAM map: user: 0000000000000000 - 0000000000093400 (usable) user: 0000000000093400 - 00000000000a0000 (reserved) user: 0000000000100000 - 000000003fee0000 (usable) user: 000000003fee0000 - 000000003fef3000 (ACPI data) user: 000000003fef3000 - 000000003ff80000 (ACPI NVS) user: 000000003ff80000 - 0000000040000000 (reserved) user: 00000000e0000000 - 00000000f0000000 (reserved) user: 00000000fec00000 - 00000000fec10000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ff000000 - 0000000100000000 (reserved) But should have resulted in: user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000001000000 - 000000000151b000 (usable) user: 00000000015bb000 - 0000000008ffc000 (usable) user: 000000003fee0000 - 000000003ff80000 (ACPI data) This is happening because of an improper usage of strcmp() in the e820 parsing code. The strcmp() always returns !0 and never resets the value for e820.nr_map and returns an incorrect user-defined map. This patch fixes the problem. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-09Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: allow offline processing for disconnected devices [S390] cio: handle ssch() return codes correctly. [S390] cio: Correct cleanup on error. [S390] CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode
2008-09-09Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP22: Fix detection of second HPC3 on Challenge S
2008-09-09Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6: UBIFS: make minimum fanout 3 UBIFS: fix division by zero UBIFS: amend f_fsid UBIFS: fill f_fsid UBIFS: improve statfs reporting even more UBIFS: introduce LEB overhead UBIFS: add forgotten gc_idx_lebs component UBIFS: fix assertion UBIFS: improve statfs reporting UBIFS: remove incorrect index space check UBIFS: push empty flash hack down UBIFS: do not update min_idx_lebs in stafs UBIFS: allow for racing between GC and TNC UBIFS: always read hashed-key nodes under TNC mutex UBIFS: fix zero-length truncations
2008-09-09lib: Correct printk %pF to work on all architecturesJames Bottomley
It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer formats" in commit 0fe1ef24f7bd0020f29ffe287dfdb9ead33ca0b2. However, the current way its coded doesn't work on parisc64. For two reasons: 1) parisc isn't in the #ifdef and 2) parisc has a different format for function descriptors Make dereference_function_descriptor() more accommodating by allowing architecture overrides. I put the three overrides (for parisc64, ppc64 and ia64) in arch/kernel/module.c because that's where the kernel internal linker which knows how to deal with function descriptors sits. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-09MAINTAINERS: add Atheros maintainer for atlxChris Snook
Jie Yang at Atheros is getting more directly involved with upstream work on the atl* drivers. This patch changes the ATL1 entry to ATLX (atl2 support posted to netdev today) and adds him as a maintainer. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-09update Documentation/filesystems/Locking for 2.6.27 changesChristoph Hellwig
In the 2.6.27 circle ->fasync lost the BKL, and the last remaining ->open variant that takes the BKL is also gone. ->get_sb and ->kill_sb didn't have BKL forever, so updated the entries while we're at that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 18:40:32 +0000