aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-08CRIS v32: New version of I2C driver.Jesper Nilsson
- Add i2c_write and i2c_read as functions. - Use spinlocks for critical regions. - Add config item to set I2C data and clock port. - Put unneeded testcode inside #if 0. - Remove CVS id tag.
2008-02-08CRIS v32: Fixup kernel Makefile.Jesper Nilsson
- Remove CRISv32 common arbiter, dma, io and pinmux files, they are now defined in machine dependent directories. - Add cache and cacheflush files for working around cache problems in CRISv32 chips.
2008-02-08CRIS v32: Update entry.S to working order.Jesper Nilsson
- Remove oldset parameter. - Utilise delay-slot for parameter moving. - Add kernel_execve as break 13. - Add new kernel syscalls.
2008-02-08CRIS: Remove define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORYJesper Nilsson
2008-02-08CRIS v32: Whitespace and formatting changes for kernel/ptrace.cJesper Nilsson
2008-02-08CRIS: Minor generic kernel/traps.c changes.Jesper Nilsson
- Collect extern declarations at top of file. - Change raw_printk to printk, use oops_in_progress instead. - Fix formatting and whitespace. - Allow the watchdog to be disabled during oops.
2008-02-08CRIS: Minor fixes to mm/fault.cJesper Nilsson
- Only disallow oops if we're in_interrupt context (was in_atomic before) - Use the generic oops_in_progress instead of the raw_printk hack. - Fix whitespace/formatting. - Remove CVS log entries.
2008-02-08CRIS v32: Add headers for EtraxFS and Artpec-3 chips.Jesper Nilsson
2008-02-08CRIS v32: Add prototypes for cache flushingJesper Nilsson
We need these to work around some cache bugs in CRISv32 chips.
2008-02-08CRIS: Remove unnecessary CVS log from cris/mm/init.cJesper Nilsson
2008-02-08CRIS v32: Update asm-cris/arch-v32/irq.h for ETRAX FS and ARTPEC-3Jesper Nilsson
- Correct include to use <> - Rework calculation of number of IRQs and exceptions we have. - Remove useless "mask" argument to BUILD_IRQ macro
2008-02-08CRIS: Merge axisflashmap.h with Axis internal changes.Jesper Nilsson
- Add partition table struct to be used to parse partition table in flash. - Add JFFS2 as a type, and add readoly flag. - Improve some comments. - Lindent has been run, fixing whitespace and formatting issues.
2008-02-08CRIS v32: Update synchronous serial driver.Jesper Nilsson
Now uses a DMA descriptor ring, which should avoid any unnecessary pauses in the streams.
2008-02-08CRIS v32: Add SECOND_WORD_SYNC, used in sync_serial.Jesper Nilsson
2008-02-08CRIS v32: Add L2 cache initialization code.Jesper Nilsson
2008-02-08CRIS v32: Add hardware dependent include files and defconfigs for ETRAX FS ↵Jesper Nilsson
and ARTPEC-3 chips. The header files describe the hardware registers available in both these chips, note that most of this documentation is automatically generated from the hardware implementation.
2008-02-08CRIS v32: Add new machine dependent files for Etrax-FS and Artpec-3.Jesper Nilsson
The two chips are somewhat different, and needs different handling. Adds handing of the dma, dram initialization, hardware settings, io, memory arbiter and pinmux Also moves the dma, dram initialization and io from CRIS v32 common files.
2008-02-08CRIS v32: Add new driver files for Etrax-FSJesper Nilsson
Adds gpio and nandflash handling for Etrax-FS
2008-02-08CRIS v32: Add new driver files for Artpec-3.Jesper Nilsson
Adds gpio and nandflash handling for Artpec-3.
2008-02-08CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings.Jesper Nilsson
- Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2008-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (44 commits) dm raid1: report fault status dm raid1: handle read failures dm raid1: fix EIO after log failure dm raid1: handle recovery failures dm raid1: handle write failures dm snapshot: combine consecutive exceptions in memory dm: stripe enhanced status return dm: stripe trigger event on failure dm log: auto load modules dm: move deferred bio flushing to workqueue dm crypt: use async crypto dm crypt: prepare async callback fn dm crypt: add completion for async dm crypt: add async request mempool dm crypt: extract scatterlist processing dm crypt: tidy io ref counting dm crypt: introduce crypt_write_io_loop dm crypt: abstract crypt_write_done dm crypt: store sector mapping in dm_crypt_io dm crypt: move queue functions ...
2008-02-07Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (59 commits) hwmon: (lm80) Add individual alarm files hwmon: (lm80) De-macro the sysfs callbacks hwmon: (lm80) Various cleanups hwmon: (w83627hf) Refactor beep enable handling hwmon: (w83627hf) Add individual alarm and beep files hwmon: (w83627hf) Enable VBAT monitoring hwmon: (w83627ehf) The W83627DHG has 8 VID pins hwmon: (asb100) Add individual alarm files hwmon: (asb100) De-macro the sysfs callbacks hwmon: (asb100) Various cleanups hwmon: VRM is not written to registers hwmon: (dme1737) fix Super-IO device ID override hwmon: (dme1737) fix divide-by-0 hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro hwmon: Add support for Texas Instruments/Burr-Brown ADS7828 hwmon: (adm9240) Add individual alarm files hwmon: (lm77) Add individual alarm files hwmon: Discard useless I2C driver IDs hwmon: (lm85) Make the pwmN_enable files writable hwmon: (lm85) Return standard values in pwmN_enable ...
2008-02-07Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits) [XFS] add __init/__exit mark to specific init/cleanup functions [XFS] Fix oops in xfs_file_readdir() [XFS] kill xfs_root [XFS] keep i_nlink updated and use proper accessors [XFS] stop updating inode->i_blocks [XFS] Make xfs_ail_check check less by default [XFS] Move AIL pushing into it's own thread [XFS] use generic_permission [XFS] stop re-checking permissions in xfs_swapext [XFS] clean up xfs_swapext [XFS] remove permission check from xfs_change_file_space [XFS] prevent panic during log recovery due to bogus op_hdr length [XFS] Cleanup various fid related bits: [XFS] Fix xfs_lowbit64 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros. [XFS] kill superflous buffer locking (2nd attempt) [XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity [XFS] Remove the BPCSHIFT and NB* based macros from XFS. [XFS] Remove bogus assert [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config ...
2008-02-07Convert SG from nopage to fault.Nick Piggin
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'slub-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm * 'slub-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: SLUB: fix checkpatch warnings Use non atomic unlock SLUB: Support for performance statistics SLUB: Alternate fast paths using cmpxchg_local SLUB: Use unique end pointer for each slab page. SLUB: Deal with annoying gcc warning on kfree()
2008-02-08dm raid1: report fault statusJonathan Brassow
This patch adds extra information to the mirror status output, so that it can be determined which device(s) have failed. For each mirror device, a character is printed indicating the most severe error encountered. The characters are: * A => Alive - No failures * D => Dead - A write failure occurred leaving mirror out-of-sync * S => Sync - A sychronization failure occurred, mirror out-of-sync * R => Read - A read failure occurred, mirror data unaffected This allows userspace to properly reconfigure the mirror set. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle read failuresJonathan Brassow
This patch gives the ability to respond-to/record device failures that happen during read operations. It also adds the ability to read from mirror devices that are not the primary if they are in-sync. There are essentially two read paths in mirroring; the direct path and the queued path. When a read request is mapped, if the region is 'in-sync' the direct path is taken; otherwise the queued path is taken. If the direct path is taken, we must record bio information so that if the read fails we can retry it. We then discover the status of a direct read through mirror_end_io. If the read has failed, we will mark the device from which the read was attempted as failed (so we don't try to read from it again), restore the bio and try again. If the queued path is taken, we discover the results of the read from 'read_callback'. If the device failed, we will mark the device as failed and attempt the read again if there is another device where this region is known to be 'in-sync'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: fix EIO after log failureJonathan Brassow
This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle recovery failuresJonathan Brassow
This patch adds the calls to 'fail_mirror' if an error occurs during mirror recovery (aka resynchronization). 'fail_mirror' is responsible for recording the type of error by mirror device and ensuring an event gets raised for the purpose of notifying userspace. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle write failuresJonathan Brassow
This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm snapshot: combine consecutive exceptions in memoryMilan Broz
Provided sector_t is 64 bits, reduce the in-memory footprint of the snapshot exception table by the simple method of using unused bits of the chunk number to combine consecutive entries. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: stripe enhanced status returnBrian Wood
This patch adds additional information to the status line. It is added at the end of the returned text so it will not interfere with existing implementations using this data. The addition of this information will allow for a common return interface to match that returned with the dm-raid1.c status line (with Jonathan Brassow's patches). Here is a sample of what is returned with a mirror "status" call: isw_eeaaabgfg_mirror: 0 488390920 mirror 2 8:16 8:32 3727/3727 1 AA 1 core Here's what's returned with this patch for a stripe "status" call: isw_dheeijjdej_stripe: 0 976783872 striped 2 8:16 8:32 1 AA Signed-off-by: Brian Wood <brian.j.wood@intel.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: stripe trigger event on failureBrian Wood
This patch adds the stripe_end_io function to process errors that might occur after an IO operation. As part of this there are a number of enhancements made to record and trigger events: - New atomic variable in struct stripe to record the number of errors each stripe volume device has experienced (could be used later with uevents to report back directly to userspace) - New workqueue/work struct setup to process the trigger_event function - New end_io function. It is here that testing for BIO error conditions take place. It determines the exact stripe that cause the error, records this in the new atomic variable, and calls the queue_work() function - New trigger_event function to process failure events. This calls dm_table_event() Signed-off-by: Brian Wood <brian.j.wood@intel.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm log: auto load modulesJonathan Brassow
If the log type is not recognised, attempt to load the module 'dm-log-<type>.ko'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: move deferred bio flushing to workqueueMilan Broz
Add a single-thread workqueue for each mapped device and move flushing of the lists of pushback and deferred bios to this new workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: use async cryptoMilan Broz
dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: prepare async callback fnMilan Broz
dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: add completion for asyncMilan Broz
dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: add async request mempoolMilan Broz
dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: extract scatterlist processingMilan Broz
dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: tidy io ref countingMilan Broz
Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: introduce crypt_write_io_loopMilan Broz
Introduce crypt_write_io_loop(). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: abstract crypt_write_doneMilan Broz
Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: store sector mapping in dm_crypt_ioMilan Broz
Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move queue functionsAlasdair G Kergon
Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: adjust io processing functionsMilan Broz
Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: tidy crypt_endioMilan Broz
Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move error setting outside crypt_dec_pendingMilan Broz
Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: remove unnecessary crypt_context write parmMilan Broz
Remove write attribute from convert_context and use bio flag instead. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move convert_context inside dm_crypt_ioMilan Broz
Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>