aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-28[POWERPC] 83xx: Add the MPC8315E RDB dtsKim Phillips
Add the dts for the MPC8315E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, SATA, and serial. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add base platform support for the mpc8315 rdb boardKim Phillips
mpc8315 identical to mpc8313 here, just check compatible. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platformKim Phillips
prepare for adding support for the mpc8315 rdb, since they are identical wrt platform code. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov
Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28spi_mpc83xx: use brg-frequency for SPI in QEAnton Vorontsov
In case of QE we can use brg-frequency (which is qeclk/2). Thus no need to divide sysclk in the spi_mpc83xx. This patch also adds code to use get_brgfreq() on QE chips. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28ucc_geth: get rid of device_type for mdioAnton Vorontsov
device_type property is bogus, thus use proper compatible. Also change compatible property to "fsl,ucc-mdio". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xxKumar Gala
* "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1Paul Gortmaker
Move mpc834x_mds device tree source forward to dts-v1 format. Nothing too complex in this one, so it boils down to just adding a bunch of 0x in the right places and converting clock speeds to decimal. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM: Move definition of buffer descriptor to cpm.hJochen Friedrich
Buffer descriptors are used by both CPM1 and CPM2. Move the definitions from the cpm dependent include file to common cpm.h Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Get rid of conditional includes of board specific setupJochen Friedrich
Directly include mpc885ads.h from mpc885ads_setup.c. Now we can get rid of the arch dependent includes in mpc8xx.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove sysdev/commproc.hJochen Friedrich
Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now unneeded sysdev/commproc.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove unneeded and misspelled prototype m8xx_calibrate_decrJochen Friedrich
m8xx_calibrate_decr seems to be a misspelled prototype for mpc8xx_calibrate_decr. As it's not needed anyways, just remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Rename m8xx_pic_init to mpc8xx_pics_initJochen Friedrich
m8xx_pic_init calls both mpc8xx_pic_init and cpm_pic_init. Renaming the function to use the same name space as the rest of the mpc8xx specific funtions and to be more meaningful. m8xx_pic_init is declared in ppc8xx_pic.h but defined nowhere in the ppc tree. Remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove unused m8xx_cpm_hostalloc/free/dump()Jochen Friedrich
m8xx_cpm_hostalloc is still defined in commproc.c, but no users are left in the kernel tree. m8xx_cpm_hostfree and m8xx_cpm_hostdump are only defined in the headers. Remove this dead code. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add default config file for Wind River SBC8349 boardPaul Gortmaker
Default config file for SBC8349 board, suitable for use as with NFS as a root file system and gianfar as the NFS root device. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add device tree source for Wind River SBC834x board.Paul Gortmaker
This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add support for Wind River SBC834x boardsPaul Gortmaker
This adds the basic support for the Wind River SBC834x boards. The SBC8349 is more common, although it should work on the SBC8347 board as well. Support is heavily based on the existing MPC834x_MDS code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8548Paul Gortmaker
This is a suitable .config file for building the WRS SBC8548 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the soc/16550 compatible UART. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8548 boardPaul Gortmaker
This adds a v1 device tree source for the Wind River SBC8548 board. The biggest difference between this and the MPC8548CDS reference platform is the absence of the CDS's Arcadia peripherals and physical access to the PCI#2 bus. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add basic support for Wind River SBC8548 boardPaul Gortmaker
This adds the basic support for the Wind River SBC8548 board, implemented as powerpc. It closely follows the implementation of the MPC8548CDS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8560Paul Gortmaker
This is a suitable .config file for building the WRS SBC8560 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the 16550 compatible UART on the board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boardsPaul Gortmaker
Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 boardPaul Gortmaker
This adds a v1 device tree source for the Wind River SBC8560 board. The biggest difference between this and the MPC8560ADS reference platform dts is the use of an external 16550 compatible UART instead of the CPM2. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add support for Wind River SBC8560 in arch/powerpcPaul Gortmaker
This adds support for the Wind River SBC8560 board, implemented as powerpc. It closely follows the implementation of the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Reduce code duplication in legacy_serial, add UART parent typesPaul Gortmaker
The legacy_serial was treating each UART parent in a separate code block. Rather than continue this trend for the new parent IDs, this condenses all (soc, tsi, opb, plus two more new types) into one of_device_id array. The new types are wrs,epld-localbus for the Wind River sbc8560, and a more generic "simple-bus" as requested by Scott Wood. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodesLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale DMA & DMA channel device tree nodesZhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port STX GP3 board over from arch/ppcKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] Add a cuboot wrapper for 85xx with CPM2Kumar Gala
The bd info struct changes if we have CPM2 enabled in u-boot. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] bootwrapper: Add find_node_by_compatibleKumar Gala
Add the ability to find a device node by just what its compatible with. This is useful in cases that we don't have a prop to find the node with. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] Always build setup-bus.c on powerpcKumar Gala
The common arch/powerpc code calls in to functions in setup-bus.c so some builds of ppc32 would fail. Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be removed when arch/ppc goes away. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26Revert "[POWERPC] Fake NUMA emulation for PowerPC"Paul Mackerras
This reverts commit 5c3f5892a2db6757a72ce8b27cba90db06683e1d, basically because it changes behaviour even when no fake NUMA information is specified on the kernel command line. Firstly, it changes the nid, thus destroying the real NUMA information. Secondly, it also changes behaviour in that if a node ends up with no memory in it because of the memory limit, we used to set it online and now we don't. Also, in the non-NUMA case with no fake NUMA information, we do node_set_online once for each LMB now, whereas previously we only did it once. I don't know if that is actually a problem, but it does seem unnecessary. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-26Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx
2008-01-25[POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.cRoel Kluin
logical/bitand typo Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp defconfigSean MacLennan
Add the defconfig for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp bootwrapperSean MacLennan
Add the cuboot wrapper for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp DTSSean MacLennan
Add the device tree for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp base platformSean MacLennan
Add the base platform support for the PIKA Warp boards. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: Add PowerPC 440EP Rev CSean MacLennan
This adds the 440EP revision C PVR to the CPU table. The chip has an FPU on it, so we also match the logical PVR Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dtsStefan Roese
The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: Add 405EXr to cputableStefan Roese
This patch adds the 405EXr to the powerpc cuptable. Basically the 405EXr is a 405EX with only one EMAC and only one PCIe interface. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] Autodetect serial console on pegasos2Olaf Hering
Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Revert chrp_pci_fixup_vt8231_ata devinit to fix libata on pegasosOlaf Hering
Commit 6d98bda79bea0e1be26c0767d0e9923ad3b72f2e changed the init order for chrp_pci_fixup_vt8231_ata(). It can not work anymore because either the irq is not yet set to 14 or pci_get_device() returns nothing. At least the printk() in chrp_pci_fixup_vt8231_ata() does not trigger anymore. pata_via works again on Pegasos with the change below. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make IOMMU code safe for > 132 GB of memoryMichael Ellerman
Currently the IOMMU code allocates one page for the segment table, that isn't safe if we have more than 132 GB of RAM. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Remove bogus comment in dma_direct_alloc_coherent()Michael Ellerman
Since commit c80d9133e99de1af607314107910a2a1645efb17 (Make direct DMA use node local allocations) went in this comment makes no sense. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 16:42:02 +0000